From: Shiji Yang Date: Sat, 16 Mar 2024 00:39:16 +0000 (+0800) Subject: ath79: restore kernel 6.1 config files and patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d123330aa93a2d09f7dff039a2351d947d4fd8f7;p=openwrt%2Fstaging%2Fneocturne.git ath79: restore kernel 6.1 config files and patches Copy patches and kernel configs from kernel 6.6 to restore the default 6.1 kernel support files. Signed-off-by: Shiji Yang --- diff --git a/target/linux/ath79/config-6.1 b/target/linux/ath79/config-6.1 new file mode 100644 index 0000000000..87f520228f --- /dev/null +++ b/target/linux/ath79/config-6.1 @@ -0,0 +1,215 @@ +CONFIG_AG71XX=y +# CONFIG_AG71XX_DEBUG is not set +CONFIG_AG71XX_DEBUG_FS=y +CONFIG_AR8216_PHY=y +CONFIG_AR8216_PHY_LEDS=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MMAP_RND_BITS_MAX=15 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_AT803X_PHY=y +CONFIG_ATH79=y +CONFIG_ATH79_WDT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" +CONFIG_CC_NO_ARRAY_BOUNDS=y +CONFIG_CEVT_R4K=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_COMMON_CLK=y +CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_DIEI=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_RIXI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 +CONFIG_CRYPTO_LIB_SHA1=y +CONFIG_CRYPTO_LIB_UTILS=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_INFO=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_EXCLUSIVE_SYSTEM_RAM=y +CONFIG_FIXED_PHY=y +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_FW_LOADER_SYSFS=y +CONFIG_GCC11_NO_ARRAY_BOUNDS=y +CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_LIB_ASHLDI3=y +CONFIG_GENERIC_LIB_ASHRDI3=y +CONFIG_GENERIC_LIB_CMPDI2=y +CONFIG_GENERIC_LIB_LSHRDI3=y +CONFIG_GENERIC_LIB_UCMPDI2=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_74X164=y +CONFIG_GPIO_ATH79=y +CONFIG_GPIO_CDEV=y +CONFIG_GPIO_GENERIC=y +# CONFIG_GPIO_LATCH_MIKROTIK is not set +# CONFIG_GPIO_RB91X_KEY is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_RESET is not set +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MDIO_GPIO=y +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_RB4XX_CPLD is not set +CONFIG_MFD_SYSCON=y +CONFIG_MIGRATION=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set +# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_MIPS_CMDLINE_FROM_DTB=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_LD_CAN_LINK_VDSO=y +# CONFIG_MIPS_NO_APPENDED_DTB is not set +CONFIG_MIPS_RAW_APPENDED_DTB=y +CONFIG_MIPS_SPRAM=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_PARSER_CYBERTAN=y +# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_ELF_FW=y +CONFIG_MTD_SPLIT_LZMA_FW=y +CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_SPLIT_WRGG_FW=y +CONFIG_MTD_VIRT_CONCAT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_SELFTESTS=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_NVMEM=y +CONFIG_NVMEM_LAYOUTS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_PAGE_POOL=y +CONFIG_PAGE_SIZE_LESS_THAN_256KB=y +CONFIG_PAGE_SIZE_LESS_THAN_64KB=y +CONFIG_PCI=y +CONFIG_PCI_AR71XX=y +CONFIG_PCI_AR724X=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLIB_LEDS=y +# CONFIG_PHY_AR7100_USB is not set +# CONFIG_PHY_AR7200_USB is not set +# CONFIG_PHY_ATH79_USB is not set +CONFIG_PINCTRL=y +CONFIG_PREEMPT_NONE_BUILD=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +CONFIG_QCOM_NET_PHYLIB=y +CONFIG_RANDSTRUCT_NONE=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGULATOR=y +CONFIG_RESET_ATH79=y +CONFIG_RESET_CONTROLLER=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_AR933X=y +CONFIG_SERIAL_AR933X_CONSOLE=y +CONFIG_SERIAL_AR933X_NR_UARTS=2 +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_AR934X=y +CONFIG_SPI_ATH79=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +# CONFIG_SPI_RB4XX is not set +CONFIG_SRCU=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y +CONFIG_TARGET_ISA_REV=2 +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_ZBOOT_LOAD_ADDRESS=0x0 diff --git a/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch b/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch new file mode 100644 index 0000000000..942380fc7b --- /dev/null +++ b/target/linux/ath79/patches-6.1/010-v6.4-gpio-ath79-Convert-to-immutable-irq_chip.patch @@ -0,0 +1,60 @@ +From b11ce7e48121a02ceedec9f4dfcab4f2bee8f35f Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Thu, 9 Mar 2023 08:45:54 +0100 +Subject: gpio: ath79: Convert to immutable irq_chip + +Convert the driver to immutable irq-chip with a bit of +intuition. + +Cc: Marc Zyngier +Acked-by: Marc Zyngier +Signed-off-by: Linus Walleij +Signed-off-by: Bartosz Golaszewski +--- + drivers/gpio/gpio-ath79.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/gpio/gpio-ath79.c ++++ b/drivers/gpio/gpio-ath79.c +@@ -71,6 +71,7 @@ static void ath79_gpio_irq_unmask(struct + u32 mask = BIT(irqd_to_hwirq(data)); + unsigned long flags; + ++ gpiochip_enable_irq(&ctrl->gc, irqd_to_hwirq(data)); + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); +@@ -85,6 +86,7 @@ static void ath79_gpio_irq_mask(struct i + raw_spin_lock_irqsave(&ctrl->lock, flags); + ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0); + raw_spin_unlock_irqrestore(&ctrl->lock, flags); ++ gpiochip_disable_irq(&ctrl->gc, irqd_to_hwirq(data)); + } + + static void ath79_gpio_irq_enable(struct irq_data *data) +@@ -169,13 +171,15 @@ static int ath79_gpio_irq_set_type(struc + return 0; + } + +-static struct irq_chip ath79_gpio_irqchip = { ++static const struct irq_chip ath79_gpio_irqchip = { + .name = "gpio-ath79", + .irq_enable = ath79_gpio_irq_enable, + .irq_disable = ath79_gpio_irq_disable, + .irq_mask = ath79_gpio_irq_mask, + .irq_unmask = ath79_gpio_irq_unmask, + .irq_set_type = ath79_gpio_irq_set_type, ++ .flags = IRQCHIP_IMMUTABLE, ++ GPIOCHIP_IRQ_RESOURCE_HELPERS, + }; + + static void ath79_gpio_irq_handler(struct irq_desc *desc) +@@ -274,7 +278,7 @@ static int ath79_gpio_probe(struct platf + /* Optional interrupt setup */ + if (!np || of_property_read_bool(np, "interrupt-controller")) { + girq = &ctrl->gc.irq; +- girq->chip = &ath79_gpio_irqchip; ++ gpio_irq_chip_set_chip(girq, &ath79_gpio_irqchip); + girq->parent_handler = ath79_gpio_irq_handler; + girq->num_parents = 1; + girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents), diff --git a/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch b/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch new file mode 100644 index 0000000000..7aa501514d --- /dev/null +++ b/target/linux/ath79/patches-6.1/100-reset-ath79-read-back-reset-register.patch @@ -0,0 +1,33 @@ +From 661edfc3dab943a67c8821353b63cc23057f7ce9 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Tue, 9 Jan 2024 20:48:46 +0100 +Subject: [PATCH] reset: ath79: read back reset register + +Read back the reset register in order to flush the cache. This fixes +spurious reboot hangs on TP-Link TL-WDR3600 and TL-WDR4300 with Zentel +DRAM chips. + +This issue was fixed in the past, but switching to the reset-driver +specific implementation removed the old fix. + +Link: https://github.com/freifunk-gluon/gluon/issues/2904 +Link: https://github.com/openwrt/openwrt/issues/13043 +Link: https://dev.archive.openwrt.org/ticket/17839 +Link: f8a7bfe1cb2c ("MIPS: ath79: fix system restart") + +Signed-off-by: David Bauer +--- + drivers/reset/reset-ath79.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/reset/reset-ath79.c ++++ b/drivers/reset/reset-ath79.c +@@ -37,6 +37,8 @@ static int ath79_reset_update(struct res + else + val &= ~BIT(id); + writel(val, ath79_reset->base); ++ /* Flush cache */ ++ readl(ath79_reset->base); + spin_unlock_irqrestore(&ath79_reset->lock, flags); + + return 0; diff --git a/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch new file mode 100644 index 0000000000..ceda511c21 --- /dev/null +++ b/target/linux/ath79/patches-6.1/300-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch @@ -0,0 +1,168 @@ +From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 6 Mar 2018 09:55:13 +0100 +Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for + QCA9556 SoCs + +Signed-off-by: John Crispin +--- + drivers/irqchip/Makefile | 1 + + drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++ + 2 files changed, 143 insertions(+) + create mode 100644 drivers/irqchip/irq-ath79-intc.c + +--- a/drivers/irqchip/Makefile ++++ b/drivers/irqchip/Makefile +@@ -4,6 +4,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o + obj-$(CONFIG_AL_FIC) += irq-al-fic.o + obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o + obj-$(CONFIG_ATH79) += irq-ath79-cpu.o ++obj-$(CONFIG_ATH79) += irq-ath79-intc.o + obj-$(CONFIG_ATH79) += irq-ath79-misc.o + obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o + obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o +--- /dev/null ++++ b/drivers/irqchip/irq-ath79-intc.c +@@ -0,0 +1,142 @@ ++/* ++ * Atheros AR71xx/AR724x/AR913x specific interrupt handling ++ * ++ * Copyright (C) 2018 John Crispin ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#define ATH79_MAX_INTC_CASCADE 3 ++ ++struct ath79_intc { ++ struct irq_chip chip; ++ u32 irq; ++ u32 pending_mask; ++ u32 int_status; ++ u32 irq_mask[ATH79_MAX_INTC_CASCADE]; ++ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE]; ++}; ++ ++static void ath79_intc_irq_handler(struct irq_desc *desc) ++{ ++ struct irq_domain *domain = irq_desc_get_handler_data(desc); ++ struct ath79_intc *intc = domain->host_data; ++ u32 pending; ++ ++ pending = ath79_reset_rr(intc->int_status); ++ pending &= intc->pending_mask; ++ ++ if (pending) { ++ int i; ++ ++ for (i = 0; i < domain->hwirq_max; i++) ++ if (pending & intc->irq_mask[i]) { ++ if (intc->irq_wb_chan[i] != 0xffffffff) ++ ath79_ddr_wb_flush(intc->irq_wb_chan[i]); ++ generic_handle_irq(irq_find_mapping(domain, i)); ++ } ++ } else { ++ spurious_interrupt(); ++ } ++} ++ ++static void ath79_intc_irq_enable(struct irq_data *d) ++{ ++ struct ath79_intc *intc = d->domain->host_data; ++ enable_irq(intc->irq); ++} ++ ++static void ath79_intc_irq_disable(struct irq_data *d) ++{ ++ struct ath79_intc *intc = d->domain->host_data; ++ disable_irq(intc->irq); ++} ++ ++static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ath79_intc *intc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ath79_irq_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ath79_intc_map, ++}; ++ ++static int __init ath79_intc_of_init( ++ struct device_node *node, struct device_node *parent) ++{ ++ struct irq_domain *domain; ++ struct ath79_intc *intc; ++ int cnt, cntwb, i, err; ++ ++ cnt = of_property_count_u32_elems(node, "qca,pending-bits"); ++ if (cnt > ATH79_MAX_INTC_CASCADE) ++ panic("Too many INTC pending bits\n"); ++ ++ intc = kzalloc(sizeof(*intc), GFP_KERNEL); ++ if (!intc) ++ panic("Failed to allocate INTC memory\n"); ++ intc->chip = dummy_irq_chip; ++ intc->chip.name = "INTC"; ++ intc->chip.irq_disable = ath79_intc_irq_disable; ++ intc->chip.irq_enable = ath79_intc_irq_enable; ++ ++ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) { ++ panic("Missing address of interrupt status register\n"); ++ } ++ ++ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt); ++ for (i = 0; i < cnt; i++) { ++ intc->pending_mask |= intc->irq_mask[i]; ++ intc->irq_wb_chan[i] = 0xffffffff; ++ } ++ ++ cntwb = of_count_phandle_with_args( ++ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells"); ++ ++ for (i = 0; i < cntwb; i++) { ++ struct of_phandle_args args; ++ u32 irq = i; ++ ++ of_property_read_u32_index( ++ node, "qca,ddr-wb-channel-interrupts", i, &irq); ++ if (irq >= ATH79_MAX_INTC_CASCADE) ++ continue; ++ ++ err = of_parse_phandle_with_args( ++ node, "qca,ddr-wb-channels", ++ "#qca,ddr-wb-channel-cells", ++ i, &args); ++ if (err) ++ return err; ++ ++ intc->irq_wb_chan[irq] = args.args[0]; ++ } ++ ++ intc->irq = irq_of_parse_and_map(node, 0); ++ if (!intc->irq) ++ panic("Failed to get INTC IRQ"); ++ ++ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc); ++ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain); ++ ++ return 0; ++} ++IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc", ++ ath79_intc_of_init); diff --git a/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch new file mode 100644 index 0000000000..13117d9a8e --- /dev/null +++ b/target/linux/ath79/patches-6.1/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch @@ -0,0 +1,23 @@ +From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 6 Mar 2018 09:58:19 +0100 +Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper + +Signed-off-by: John Crispin +--- + drivers/irqchip/irq-ath79-cpu.c | 7 ------- + 1 file changed, 7 deletions(-) + +--- a/drivers/irqchip/irq-ath79-cpu.c ++++ b/drivers/irqchip/irq-ath79-cpu.c +@@ -85,10 +85,3 @@ static int __init ar79_cpu_intc_of_init( + } + IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc", + ar79_cpu_intc_of_init); +- +-void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3) +-{ +- irq_wb_chan[2] = irq_wb_chan2; +- irq_wb_chan[3] = irq_wb_chan3; +- mips_cpu_irq_init(); +-} diff --git a/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch new file mode 100644 index 0000000000..cf0a75c791 --- /dev/null +++ b/target/linux/ath79/patches-6.1/310-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch @@ -0,0 +1,57 @@ +From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 25 Jun 2018 15:52:10 +0200 +Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc + +With the driver being converted from platform_data to pure OF, we need to +also add some docs. + +Cc: Rob Herring +Cc: devicetree@vger.kernel.org +Signed-off-by: John Crispin +--- + .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt +@@ -0,0 +1,38 @@ ++* Qualcomm Atheros AR7100 PCI express root complex ++ ++Required properties: ++- compatible: should contain "qcom,ar7100-pci" to identify the core. ++- reg: Should contain the register ranges as listed in the reg-names property. ++- reg-names: Definition: Must include the following entries ++ - "cfg_base" IO Memory ++- #address-cells: set to <3> ++- #size-cells: set to <2> ++- ranges: ranges for the PCI memory and I/O regions ++- interrupt-map-mask and interrupt-map: standard PCI ++ properties to define the mapping of the PCIe interface to interrupt ++ numbers. ++- #interrupt-cells: set to <1> ++- interrupt-controller: define to enable the builtin IRQ cascade. ++ ++Optional properties: ++- interrupt-parent: phandle to the MIPS IRQ controller ++ ++* Example for ar7100 ++ pcie@180c0000 { ++ compatible = "qca,ar7100-pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ bus-range = <0x0 0x0>; ++ reg = <0x17010000 0x100>; ++ reg-names = "cfg_base"; ++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 ++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>; ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-map-mask = <0 0 0 1>; ++ interrupt-map = <0 0 0 0 &pcie0 0>; ++ }; diff --git a/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch new file mode 100644 index 0000000000..9a315aed0b --- /dev/null +++ b/target/linux/ath79/patches-6.1/311-MIPS-pci-ar71xx-convert-to-OF.patch @@ -0,0 +1,206 @@ +From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 23 Jun 2018 15:07:23 +0200 +Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF + +With the ath79 target getting converted to pure OF, we can drop all the +platform data code and add the missing OF bits to the driver. We also add +a irq domain for the PCI/e controllers cascade, thus making it usable from +dts files. + +Signed-off-by: John Crispin +--- + arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++----------------------- + 1 file changed, 41 insertions(+), 41 deletions(-) + +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -15,8 +15,11 @@ + #include + #include + #include ++#include + #include + #include ++#include ++#include + + #include + #include +@@ -46,12 +49,13 @@ + #define AR71XX_PCI_IRQ_COUNT 5 + + struct ar71xx_pci_controller { ++ struct device_node *np; + void __iomem *cfg_base; + int irq; +- int irq_base; + struct pci_controller pci_ctrl; + struct resource io_res; + struct resource mem_res; ++ struct irq_domain *domain; + }; + + /* Byte lane enable bits */ +@@ -225,29 +229,30 @@ static struct pci_ops ar71xx_pci_ops = { + + static void ar71xx_pci_irq_handler(struct irq_desc *desc) + { +- struct ar71xx_pci_controller *apc; + void __iomem *base = ath79_reset_base; ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc); + u32 pending; + +- apc = irq_desc_get_handler_data(desc); +- ++ chained_irq_enter(chip, desc); + pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & + __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + + if (pending & AR71XX_PCI_INT_DEV0) +- generic_handle_irq(apc->irq_base + 0); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); + + else if (pending & AR71XX_PCI_INT_DEV1) +- generic_handle_irq(apc->irq_base + 1); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 2)); + + else if (pending & AR71XX_PCI_INT_DEV2) +- generic_handle_irq(apc->irq_base + 2); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 3)); + + else if (pending & AR71XX_PCI_INT_CORE) +- generic_handle_irq(apc->irq_base + 4); ++ generic_handle_irq(irq_linear_revmap(apc->domain, 4)); + + else + spurious_interrupt(); ++ chained_irq_exit(chip, desc); + } + + static void ar71xx_pci_irq_unmask(struct irq_data *d) +@@ -258,7 +263,7 @@ static void ar71xx_pci_irq_unmask(struct + u32 t; + + apc = irq_data_get_irq_chip_data(d); +- irq = d->irq - apc->irq_base; ++ irq = irq_linear_revmap(apc->domain, d->irq); + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +@@ -275,7 +280,7 @@ static void ar71xx_pci_irq_mask(struct i + u32 t; + + apc = irq_data_get_irq_chip_data(d); +- irq = d->irq - apc->irq_base; ++ irq = irq_linear_revmap(apc->domain, d->irq); + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +@@ -291,24 +296,31 @@ static struct irq_chip ar71xx_pci_irq_ch + .irq_mask_ack = ar71xx_pci_irq_mask, + }; + ++static int ar71xx_pci_irq_map(struct irq_domain *d, ++ unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ar71xx_pci_controller *apc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq); ++ irq_set_chip_data(irq, apc); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ar71xx_pci_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ar71xx_pci_irq_map, ++}; ++ + static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) + { + void __iomem *base = ath79_reset_base; +- int i; + + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); + +- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); +- +- apc->irq_base = ATH79_PCI_IRQ_BASE; +- for (i = apc->irq_base; +- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) { +- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, +- handle_level_irq); +- irq_set_chip_data(i, apc); +- } +- ++ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT, ++ &ar71xx_pci_domain_ops, apc); + irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler, + apc); + } +@@ -325,10 +337,14 @@ static void ar71xx_pci_reset(void) + mdelay(100); + } + ++static const struct of_device_id ar71xx_pci_ids[] = { ++ { .compatible = "qca,ar7100-pci" }, ++ {}, ++}; ++ + static int ar71xx_pci_probe(struct platform_device *pdev) + { + struct ar71xx_pci_controller *apc; +- struct resource *res; + u32 t; + + apc = devm_kzalloc(&pdev->dev, sizeof(struct ar71xx_pci_controller), +@@ -345,26 +361,6 @@ static int ar71xx_pci_probe(struct platf + if (apc->irq < 0) + return -EINVAL; + +- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); +- if (!res) +- return -EINVAL; +- +- apc->io_res.parent = res; +- apc->io_res.name = "PCI IO space"; +- apc->io_res.start = res->start; +- apc->io_res.end = res->end; +- apc->io_res.flags = IORESOURCE_IO; +- +- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); +- if (!res) +- return -EINVAL; +- +- apc->mem_res.parent = res; +- apc->mem_res.name = "PCI memory space"; +- apc->mem_res.start = res->start; +- apc->mem_res.end = res->end; +- apc->mem_res.flags = IORESOURCE_MEM; +- + ar71xx_pci_reset(); + + /* setup COMMAND register */ +@@ -377,9 +373,11 @@ static int ar71xx_pci_probe(struct platf + + ar71xx_pci_irq_init(apc); + ++ apc->np = pdev->dev.of_node; + apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; + apc->pci_ctrl.mem_resource = &apc->mem_res; + apc->pci_ctrl.io_resource = &apc->io_res; ++ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node); + + register_pci_controller(&apc->pci_ctrl); + +@@ -390,6 +388,7 @@ static struct platform_driver ar71xx_pci + .probe = ar71xx_pci_probe, + .driver = { + .name = "ar71xx-pci", ++ .of_match_table = of_match_ptr(ar71xx_pci_ids), + }, + }; + diff --git a/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch new file mode 100644 index 0000000000..a32c9bdcde --- /dev/null +++ b/target/linux/ath79/patches-6.1/312-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch @@ -0,0 +1,61 @@ +From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 25 Jun 2018 15:52:02 +0200 +Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc + +With the driver being converted from platform_data to pure OF, we need to +also add some docs. + +Cc: Rob Herring +Cc: devicetree@vger.kernel.org +Signed-off-by: John Crispin +--- + .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++ + 1 file changed, 42 insertions(+) + create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt +@@ -0,0 +1,42 @@ ++* Qualcomm Atheros AR724X PCI express root complex ++ ++Required properties: ++- compatible: should contain "qcom,ar7240-pci" to identify the core. ++- reg: Should contain the register ranges as listed in the reg-names property. ++- reg-names: Definition: Must include the following entries ++ - "crp_base" Configuration registers ++ - "ctrl_base" Control registers ++ - "cfg_base" IO Memory ++- #address-cells: set to <3> ++- #size-cells: set to <2> ++- ranges: ranges for the PCI memory and I/O regions ++- interrupt-map-mask and interrupt-map: standard PCI ++ properties to define the mapping of the PCIe interface to interrupt ++ numbers. ++- #interrupt-cells: set to <1> ++- interrupt-parent: phandle to the MIPS IRQ controller ++ ++Optional properties: ++- interrupt-controller: define to enable the builtin IRQ cascade. ++ ++* Example for qca9557 ++ pcie@180c0000 { ++ compatible = "qcom,ar7240-pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ bus-range = <0x0 0x0>; ++ reg = <0x180c0000 0x1000>, ++ <0x180f0000 0x100>, ++ <0x14000000 0x1000>; ++ reg-names = "crp_base", "ctrl_base", "cfg_base"; ++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 ++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>; ++ interrupt-parent = <&intc2>; ++ interrupts = <1>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-map-mask = <0 0 0 1>; ++ interrupt-map = <0 0 0 0 &pcie0 0>; ++ }; diff --git a/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch new file mode 100644 index 0000000000..7927c1cbf5 --- /dev/null +++ b/target/linux/ath79/patches-6.1/313-MIPS-pci-ar724x-convert-to-OF.patch @@ -0,0 +1,213 @@ +From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 23 Jun 2018 15:07:37 +0200 +Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF + +With the ath79 target getting converted to pure OF, we can drop all the +platform data code and add the missing OF bits to the driver. We also add +a irq domain for the PCI/e controllers cascade, thus making it usable from +dts files. + +Signed-off-by: John Crispin +--- + arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------ + 1 file changed, 42 insertions(+), 46 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -11,8 +11,11 @@ + #include + #include + #include ++#include + #include + #include ++#include ++#include + + #define AR724X_PCI_REG_APP 0x00 + #define AR724X_PCI_REG_RESET 0x18 +@@ -42,17 +45,20 @@ struct ar724x_pci_controller { + void __iomem *crp_base; + + int irq; +- int irq_base; + + bool link_up; + bool bar0_is_cached; + u32 bar0_value; + ++ struct device_node *np; + struct pci_controller pci_controller; ++ struct irq_domain *domain; + struct resource io_res; + struct resource mem_res; + }; + ++static struct irq_chip ar724x_pci_irq_chip; ++ + static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) + { + u32 reset; +@@ -228,35 +234,31 @@ static struct pci_ops ar724x_pci_ops = { + + static void ar724x_pci_irq_handler(struct irq_desc *desc) + { +- struct ar724x_pci_controller *apc; +- void __iomem *base; ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc); + u32 pending; + +- apc = irq_desc_get_handler_data(desc); +- base = apc->ctrl_base; +- +- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & +- __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ chained_irq_enter(chip, desc); ++ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) & ++ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK); + + if (pending & AR724X_PCI_INT_DEV0) +- generic_handle_irq(apc->irq_base + 0); +- ++ generic_handle_irq(irq_linear_revmap(apc->domain, 1)); + else + spurious_interrupt(); ++ chained_irq_exit(chip, desc); + } + + static void ar724x_pci_irq_unmask(struct irq_data *d) + { + struct ar724x_pci_controller *apc; + void __iomem *base; +- int offset; + u32 t; + + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; +- offset = apc->irq_base - d->irq; + +- switch (offset) { ++ switch (irq_linear_revmap(apc->domain, d->irq)) { + case 0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t | AR724X_PCI_INT_DEV0, +@@ -270,14 +272,12 @@ static void ar724x_pci_irq_mask(struct i + { + struct ar724x_pci_controller *apc; + void __iomem *base; +- int offset; + u32 t; + + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; +- offset = apc->irq_base - d->irq; + +- switch (offset) { ++ switch (irq_linear_revmap(apc->domain, d->irq)) { + case 0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t & ~AR724X_PCI_INT_DEV0, +@@ -302,26 +302,34 @@ static struct irq_chip ar724x_pci_irq_ch + .irq_mask_ack = ar724x_pci_irq_mask, + }; + ++static int ar724x_pci_irq_map(struct irq_domain *d, ++ unsigned int irq, irq_hw_number_t hw) ++{ ++ struct ar724x_pci_controller *apc = d->host_data; ++ ++ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq); ++ irq_set_chip_data(irq, apc); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops ar724x_pci_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = ar724x_pci_irq_map, ++}; ++ + static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, + int id) + { + void __iomem *base; +- int i; + + base = apc->ctrl_base; + + __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); + __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); + +- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT); +- +- for (i = apc->irq_base; +- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) { +- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, +- handle_level_irq); +- irq_set_chip_data(i, apc); +- } +- ++ apc->domain = irq_domain_add_linear(apc->np, 2, ++ &ar724x_pci_domain_ops, apc); + irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler, + apc); + } +@@ -360,7 +368,6 @@ static void ar724x_pci_hw_init(struct ar + static int ar724x_pci_probe(struct platform_device *pdev) + { + struct ar724x_pci_controller *apc; +- struct resource *res; + int id; + + id = pdev->id; +@@ -388,29 +395,11 @@ static int ar724x_pci_probe(struct platf + if (apc->irq < 0) + return -EINVAL; + +- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); +- if (!res) +- return -EINVAL; +- +- apc->io_res.parent = res; +- apc->io_res.name = "PCI IO space"; +- apc->io_res.start = res->start; +- apc->io_res.end = res->end; +- apc->io_res.flags = IORESOURCE_IO; +- +- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); +- if (!res) +- return -EINVAL; +- +- apc->mem_res.parent = res; +- apc->mem_res.name = "PCI memory space"; +- apc->mem_res.start = res->start; +- apc->mem_res.end = res->end; +- apc->mem_res.flags = IORESOURCE_MEM; +- ++ apc->np = pdev->dev.of_node; + apc->pci_controller.pci_ops = &ar724x_pci_ops; + apc->pci_controller.io_resource = &apc->io_res; + apc->pci_controller.mem_resource = &apc->mem_res; ++ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node); + + /* + * Do the full PCIE Root Complex Initialization Sequence if the PCIe +@@ -432,10 +421,16 @@ static int ar724x_pci_probe(struct platf + return 0; + } + ++static const struct of_device_id ar724x_pci_ids[] = { ++ { .compatible = "qcom,ar7240-pci" }, ++ {}, ++}; ++ + static struct platform_driver ar724x_pci_driver = { + .probe = ar724x_pci_probe, + .driver = { + .name = "ar724x-pci", ++ .of_match_table = of_match_ptr(ar724x_pci_ids), + }, + }; + diff --git a/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch new file mode 100644 index 0000000000..01549eec68 --- /dev/null +++ b/target/linux/ath79/patches-6.1/314-MIPS-ath79-remove-irq-code-from-pci.patch @@ -0,0 +1,149 @@ +From: John Crispin +Subject: ath79: fix remove irq code from pci driver patch + +This patch got mangled in the void while rebasing it. + +Submitted-by: John Crispin +--- + arch/mips/pci/pci-ar71xx.c | 107 ------------------ + 1 file changed, 141 deletions(-) + +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -51,11 +51,9 @@ + struct ar71xx_pci_controller { + struct device_node *np; + void __iomem *cfg_base; +- int irq; + struct pci_controller pci_ctrl; + struct resource io_res; + struct resource mem_res; +- struct irq_domain *domain; + }; + + /* Byte lane enable bits */ +@@ -227,104 +225,6 @@ static struct pci_ops ar71xx_pci_ops = { + .write = ar71xx_pci_write_config, + }; + +-static void ar71xx_pci_irq_handler(struct irq_desc *desc) +-{ +- void __iomem *base = ath79_reset_base; +- struct irq_chip *chip = irq_desc_get_chip(desc); +- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc); +- u32 pending; +- +- chained_irq_enter(chip, desc); +- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- if (pending & AR71XX_PCI_INT_DEV0) +- generic_handle_irq(irq_linear_revmap(apc->domain, 1)); +- +- else if (pending & AR71XX_PCI_INT_DEV1) +- generic_handle_irq(irq_linear_revmap(apc->domain, 2)); +- +- else if (pending & AR71XX_PCI_INT_DEV2) +- generic_handle_irq(irq_linear_revmap(apc->domain, 3)); +- +- else if (pending & AR71XX_PCI_INT_CORE) +- generic_handle_irq(irq_linear_revmap(apc->domain, 4)); +- +- else +- spurious_interrupt(); +- chained_irq_exit(chip, desc); +-} +- +-static void ar71xx_pci_irq_unmask(struct irq_data *d) +-{ +- struct ar71xx_pci_controller *apc; +- unsigned int irq; +- void __iomem *base = ath79_reset_base; +- u32 t; +- +- apc = irq_data_get_irq_chip_data(d); +- irq = irq_linear_revmap(apc->domain, d->irq); +- +- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- /* flush write */ +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +-} +- +-static void ar71xx_pci_irq_mask(struct irq_data *d) +-{ +- struct ar71xx_pci_controller *apc; +- unsigned int irq; +- void __iomem *base = ath79_reset_base; +- u32 t; +- +- apc = irq_data_get_irq_chip_data(d); +- irq = irq_linear_revmap(apc->domain, d->irq); +- +- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- +- /* flush write */ +- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +-} +- +-static struct irq_chip ar71xx_pci_irq_chip = { +- .name = "AR71XX PCI", +- .irq_mask = ar71xx_pci_irq_mask, +- .irq_unmask = ar71xx_pci_irq_unmask, +- .irq_mask_ack = ar71xx_pci_irq_mask, +-}; +- +-static int ar71xx_pci_irq_map(struct irq_domain *d, +- unsigned int irq, irq_hw_number_t hw) +-{ +- struct ar71xx_pci_controller *apc = d->host_data; +- +- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq); +- irq_set_chip_data(irq, apc); +- +- return 0; +-} +- +-static const struct irq_domain_ops ar71xx_pci_domain_ops = { +- .xlate = irq_domain_xlate_onecell, +- .map = ar71xx_pci_irq_map, +-}; +- +-static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) +-{ +- void __iomem *base = ath79_reset_base; +- +- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); +- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); +- +- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT, +- &ar71xx_pci_domain_ops, apc); +- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler, +- apc); +-} +- + static void ar71xx_pci_reset(void) + { + ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE); +@@ -357,10 +257,6 @@ static int ar71xx_pci_probe(struct platf + if (IS_ERR(apc->cfg_base)) + return PTR_ERR(apc->cfg_base); + +- apc->irq = platform_get_irq(pdev, 0); +- if (apc->irq < 0) +- return -EINVAL; +- + ar71xx_pci_reset(); + + /* setup COMMAND register */ +@@ -371,8 +267,6 @@ static int ar71xx_pci_probe(struct platf + /* clear bus errors */ + ar71xx_pci_check_error(apc, 1); + +- ar71xx_pci_irq_init(apc); +- + apc->np = pdev->dev.of_node; + apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; + apc->pci_ctrl.mem_resource = &apc->mem_res; diff --git a/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch b/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch new file mode 100644 index 0000000000..375dec8ba2 --- /dev/null +++ b/target/linux/ath79/patches-6.1/315-MIPS-pci-ar724x-add-QCA9550-reset-sequence.patch @@ -0,0 +1,130 @@ +From: David Bauer +Date: Sat, 11 Apr 2020 14:03:12 +0200 +Subject: MIPS: pci-ar724x: add QCA9550 reset sequence + +The QCA9550 family of SoCs have a slightly different reset +sequence compared to older chips. + +Normally the bootloader performs this sequence, however +some bootloader implementation expect the operating system +to clear the reset. + +Also get the resets from OF to support handling of the second +PCIe root-complex on the QCA9558. + +Signed-off-by: David Bauer + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -390,6 +390,7 @@ + #define QCA955X_PLL_CPU_CONFIG_REG 0x00 + #define QCA955X_PLL_DDR_CONFIG_REG 0x04 + #define QCA955X_PLL_CLK_CTRL_REG 0x08 ++#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c + #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 + #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 + #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c +@@ -475,6 +476,9 @@ + #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) + #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + ++#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD BIT(30) ++#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS BIT(16) ++ + #define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5) + #define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6) + #define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7) +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -8,6 +8,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -55,6 +56,9 @@ struct ar724x_pci_controller { + struct irq_domain *domain; + struct resource io_res; + struct resource mem_res; ++ ++ struct reset_control *hc_reset; ++ struct reset_control *phy_reset; + }; + + static struct irq_chip ar724x_pci_irq_chip; +@@ -340,18 +344,30 @@ static void ar724x_pci_hw_init(struct ar + int wait = 0; + + /* deassert PCIe host controller and PCIe PHY reset */ +- ath79_device_reset_clear(AR724X_RESET_PCIE); +- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); ++ reset_control_deassert(apc->hc_reset); ++ reset_control_deassert(apc->phy_reset); + +- /* remove the reset of the PCIE PLL */ +- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); +- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; +- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); +- +- /* deassert bypass for the PCIE PLL */ +- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); +- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; +- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); ++ if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) { ++ /* remove the reset of the PCIE PLL */ ++ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG); ++ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD; ++ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl); ++ ++ /* deassert bypass for the PCIE PLL */ ++ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG); ++ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS; ++ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl); ++ } else { ++ /* remove the reset of the PCIE PLL */ ++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); ++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; ++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); ++ ++ /* deassert bypass for the PCIE PLL */ ++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); ++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; ++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); ++ } + + /* set PCIE Application Control to ready */ + app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); +@@ -395,6 +411,14 @@ static int ar724x_pci_probe(struct platf + if (apc->irq < 0) + return -EINVAL; + ++ apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc"); ++ if (IS_ERR(apc->hc_reset)) ++ return PTR_ERR(apc->hc_reset); ++ ++ apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy"); ++ if (IS_ERR(apc->phy_reset)) ++ return PTR_ERR(apc->phy_reset); ++ + apc->np = pdev->dev.of_node; + apc->pci_controller.pci_ops = &ar724x_pci_ops; + apc->pci_controller.io_resource = &apc->io_res; +@@ -405,7 +429,7 @@ static int ar724x_pci_probe(struct platf + * Do the full PCIE Root Complex Initialization Sequence if the PCIe + * host controller is in reset. + */ +- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) ++ if (reset_control_status(apc->hc_reset)) + ar724x_pci_hw_init(apc); + + apc->link_up = ar724x_pci_check_link(apc); +@@ -423,6 +447,7 @@ static int ar724x_pci_probe(struct platf + + static const struct of_device_id ar724x_pci_ids[] = { + { .compatible = "qcom,ar7240-pci" }, ++ { .compatible = "qcom,qca9550-pci" }, + {}, + }; + diff --git a/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch new file mode 100644 index 0000000000..1e2715b84c --- /dev/null +++ b/target/linux/ath79/patches-6.1/316-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch @@ -0,0 +1,109 @@ +From: Gabor Juhos +Subject: [PATCH] ar71xx: swizzle address for PCI byte/word access on AR71xx + +Closes #11683. + +SVN-Revision: 32639 +--- + .../mips/include/asm/mach-ath79/mangle-port.h | 111 ++++++++++++++++++ + 1 file changed, 111 insertions(+) + create mode 100644 arch/mips/include/asm/mach-ath79/mangle-port.h + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h +@@ -0,0 +1,37 @@ ++/* ++ * Copyright (C) 2012 Gabor Juhos ++ * ++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H ++#define __ASM_MACH_ATH79_MANGLE_PORT_H ++ ++#ifdef CONFIG_PCI_AR71XX ++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); ++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); ++#else ++#define ath79_pci_swizzle_b(port) (port) ++#define ath79_pci_swizzle_w(port) (port) ++#endif ++ ++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) ++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) ++#define __swizzle_addr_l(port) (port) ++#define __swizzle_addr_q(port) (port) ++ ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define __mem_ioswabw(a, x) cpu_to_le16(x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabl(a, x) cpu_to_le32(x) ++# define ioswabq(a, x) (x) ++# define __mem_ioswabq(a, x) cpu_to_le64(x) ++ ++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ +--- a/arch/mips/pci/pci-ar71xx.c ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -68,6 +68,45 @@ static const u32 ar71xx_pci_read_mask[8] + 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0 + }; + ++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); ++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); ++ ++static inline bool ar71xx_is_pci_addr(unsigned long port) ++{ ++ unsigned long phys = CPHYSADDR(port); ++ ++ return (phys >= AR71XX_PCI_MEM_BASE && ++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); ++} ++ ++static unsigned long ar71xx_pci_swizzle_b(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; ++} ++ ++static unsigned long ar71xx_pci_swizzle_w(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; ++} ++ ++unsigned long ath79_pci_swizzle_b(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_b) ++ return __ath79_pci_swizzle_b(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_b); ++ ++unsigned long ath79_pci_swizzle_w(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_w) ++ return __ath79_pci_swizzle_w(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_w); ++ + static inline u32 ar71xx_pci_get_ble(int where, int size, int local) + { + u32 t; +@@ -275,6 +314,9 @@ static int ar71xx_pci_probe(struct platf + + register_pci_controller(&apc->pci_ctrl); + ++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; ++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; ++ + return 0; + } + diff --git a/target/linux/ath79/patches-6.1/330-missing-registers.patch b/target/linux/ath79/patches-6.1/330-missing-registers.patch new file mode 100644 index 0000000000..74789437ec --- /dev/null +++ b/target/linux/ath79/patches-6.1/330-missing-registers.patch @@ -0,0 +1,20 @@ +From: Christian Lamparter +Subject: [PATCH] ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for + + ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344 + + Signed-off-by: Christian Lamparter + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1231,6 +1231,10 @@ + #define AR934X_ETH_CFG_RDV_DELAY BIT(16) + #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3 + #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 ++#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18 ++#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20 + + /* + * QCA953X GMAC Interface diff --git a/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch new file mode 100644 index 0000000000..c2f228dfe1 --- /dev/null +++ b/target/linux/ath79/patches-6.1/331-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch @@ -0,0 +1,90 @@ +From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Mon, 18 Mar 2019 00:54:06 +0100 +Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers + +This adds missing GMAC register definitions for the Qualcomm Atheros +QCA955X series MIPS SoCs. + +They originate from the platforms U-Boot code and the AVM FRITZ!WLAN +Repeater 450E's GPL tarball. + +Signed-off-by: David Bauer +--- + .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++ + 1 file changed, 54 insertions(+) + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1251,7 +1251,12 @@ + */ + + #define QCA955X_GMAC_REG_ETH_CFG 0x00 ++#define QCA955X_GMAC_REG_SGMII_RESET 0x14 + #define QCA955X_GMAC_REG_SGMII_SERDES 0x18 ++#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c ++#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20 ++#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34 ++#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58 + + #define QCA955X_ETH_CFG_RGMII_EN BIT(0) + #define QCA955X_ETH_CFG_MII_GE0 BIT(1) +@@ -1273,9 +1278,58 @@ + #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 + #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 + ++#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0 ++#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0) ++#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1) ++#define QCA955X_SGMII_RESET_RX_125M_N BIT(2) ++#define QCA955X_SGMII_RESET_TX_125M_N BIT(3) ++#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4) ++ + #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) + #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 + #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf ++ ++#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6) ++#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8) ++#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9) ++#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11) ++#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12) ++#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13) ++#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14) ++#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15) ++ ++#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0) ++#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2) ++#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3) ++#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4) ++#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5) ++#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6) ++#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7) ++ ++#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0 ++#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7 ++#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3) ++#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4) ++#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5) ++#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6 ++#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0 ++#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8) ++#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9) ++#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10) ++#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11) ++#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12) ++#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13) ++#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14) ++ ++#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff ++#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0 ++#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00 ++#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8 ++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000 ++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16 ++#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000 ++#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24 ++ + /* + * QCA956X GMAC Interface + */ diff --git a/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch b/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch new file mode 100644 index 0000000000..a6a50e4a8a --- /dev/null +++ b/target/linux/ath79/patches-6.1/332-ath79-sgmii-config.patch @@ -0,0 +1,30 @@ +From: David Bauer +Subject: [PATCH] ath79: force SGMII SerDes mode to MAC operation + +The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. +This only allows for 1000 Mbit/s links, however when used with an SGMII +PHY in 100 Mbit/s link mode, the link remains dead. + +This strictly has nothing to do with the SerDes calibration, however it +is done at the same point in the QCA reference U-Boot which is the +blueprint for everything happening here. As the current state is more or +less a hack, this should be fine. + +This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. + +Reported-by: Tom Herbers +Tested-by: Tom Herbers +Submitted-by: David Bauer +--- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + 1 files changed, 1 insertion(+) + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1380,5 +1380,6 @@ + + #define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0 + #define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7 ++#define QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC 0x2 + + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch new file mode 100644 index 0000000000..48ce7e1d71 --- /dev/null +++ b/target/linux/ath79/patches-6.1/340-register_gpio_driver_earlier.patch @@ -0,0 +1,26 @@ +From: John Crispin +Subject: ath79: Register GPIO driver earlier + +HACK: register the GPIO driver earlier to ensure that gpio_request calls +from mach files succeed. + +Submitted-by: John Crispin +--- + drivers/gpio/gpio-ath79.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpio-ath79.c ++++ b/drivers/gpio/gpio-ath79.c +@@ -301,7 +301,11 @@ static struct platform_driver ath79_gpio + .probe = ath79_gpio_probe, + }; + +-module_platform_driver(ath79_gpio_driver); ++static int __init ath79_gpio_init(void) ++{ ++ return platform_driver_register(&ath79_gpio_driver); ++} ++postcore_initcall(ath79_gpio_init); + + MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); + MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch new file mode 100644 index 0000000000..e460fe58f3 --- /dev/null +++ b/target/linux/ath79/patches-6.1/350-MIPS-ath79-ath9k-exports.patch @@ -0,0 +1,36 @@ +From: John Crispin +Subject: [PATCH] ath79: make ahb wifi work + +Submitted-by: John Crispin +--- + arch/mips/ath79/common.c | 3 +++ + mips/include/asm/mach-ath79/ath79.h | 1+ + 1 file changed, 4 insertions(+) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -31,11 +31,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq); + + enum ath79_soc_type ath79_soc; + unsigned int ath79_soc_rev; ++EXPORT_SYMBOL_GPL(ath79_soc_rev); + + void __iomem *ath79_pll_base; + void __iomem *ath79_reset_base; + EXPORT_SYMBOL_GPL(ath79_reset_base); +-static void __iomem *ath79_ddr_base; ++void __iomem *ath79_ddr_base; ++EXPORT_SYMBOL_GPL(ath79_ddr_base); + static void __iomem *ath79_ddr_wb_flush_base; + static void __iomem *ath79_ddr_pci_win_base; + +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -149,6 +149,7 @@ void ath79_ddr_wb_flush(unsigned int reg + void ath79_ddr_set_pci_windows(void); + + extern void __iomem *ath79_pll_base; ++extern void __iomem *ath79_ddr_base; + extern void __iomem *ath79_reset_base; + + static inline void ath79_pll_wr(unsigned reg, u32 val) diff --git a/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch b/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch new file mode 100644 index 0000000000..befcf2d50f --- /dev/null +++ b/target/linux/ath79/patches-6.1/351-MIPS-ath79-common-exports.patch @@ -0,0 +1,26 @@ +From: Luiz Angelo Daros de Luca +Subject: [PATCH] ath79: export ath79_pll_base + +This symbol is declared as extern but nobody exported it. +Any module including arch/mips/include/asm/mach-ath79/ath79.h +will not build. Without this export, ag71xx.ko will not build +as a module and the build will fail like this: + +ERROR: modpost: "ath79_pll_base" [drivers/net/ethernet/atheros/ag71xx/ag71xx.ko] undefined! + +The ath79_pll_base symbol is accessed in the ath79_pll_wr() inline function. + +--- + arch/mips/ath79/common.c | 1 + + 1 file changed, 1 insertions(+) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -34,6 +34,7 @@ unsigned int ath79_soc_rev; + EXPORT_SYMBOL_GPL(ath79_soc_rev); + + void __iomem *ath79_pll_base; ++EXPORT_SYMBOL_GPL(ath79_pll_base); + void __iomem *ath79_reset_base; + EXPORT_SYMBOL_GPL(ath79_reset_base); + void __iomem *ath79_ddr_base; diff --git a/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch b/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch new file mode 100644 index 0000000000..b24ff21692 --- /dev/null +++ b/target/linux/ath79/patches-6.1/360-MIPS-ath79-export-UART1-reference-clock.patch @@ -0,0 +1,67 @@ +From: Daniel Golle +Subject: [PATCH] ath79: add support for Atheros AR934x HS UART + +AR934x chips also got the 'old' qca,ar9330-uart in addition to the +'new' ns16550a compatible one. Add support for UART1 clock selector as +well as device-tree bindings in ar934x.dtsi to make use of that uart. + +Reported-by: Piotr Dymacz +Submitted-by: Daniel Golle +--- + arch/mips/ath79/clock.c | 7 +++++++ + .../mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + include/dt-bindings/clock/ath79-clk.h | 3 ++- + 3 files changed, 10 insertions(+), 1 deletion(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -40,6 +40,7 @@ static const char * const clk_names[ATH7 + [ATH79_CLK_AHB] = "ahb", + [ATH79_CLK_REF] = "ref", + [ATH79_CLK_MDIO] = "mdio", ++ [ATH79_CLK_UART1] = "uart1", + }; + + static const char * __init ath79_clk_name(int type) +@@ -344,6 +345,9 @@ static void __init ar934x_clocks_init(vo + if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) + ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000); + ++ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL) ++ ath79_set_clk(ATH79_CLK_UART1, 100 * 1000 * 1000); ++ + iounmap(dpll_base); + } + +@@ -649,6 +653,9 @@ static void __init ath79_clocks_init_dt( + if (!clks[ATH79_CLK_MDIO]) + clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF]; + ++ if (!clks[ATH79_CLK_UART1]) ++ clks[ATH79_CLK_UART1] = clks[ATH79_CLK_REF]; ++ + if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { + pr_err("%pOF: could not register clk provider\n", np); + goto err_iounmap; +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -348,6 +348,7 @@ + #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + + #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) ++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL BIT(7) + + #define QCA953X_PLL_CPU_CONFIG_REG 0x00 + #define QCA953X_PLL_DDR_CONFIG_REG 0x04 +--- a/include/dt-bindings/clock/ath79-clk.h ++++ b/include/dt-bindings/clock/ath79-clk.h +@@ -11,7 +11,8 @@ + #define ATH79_CLK_AHB 2 + #define ATH79_CLK_REF 3 + #define ATH79_CLK_MDIO 4 ++#define ATH79_CLK_UART1 5 + +-#define ATH79_CLK_END 5 ++#define ATH79_CLK_END 6 + + #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch new file mode 100644 index 0000000000..eac17c2b50 --- /dev/null +++ b/target/linux/ath79/patches-6.1/370-MIPS-ath79-sanitize-symbols.patch @@ -0,0 +1,93 @@ +From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 23 Jun 2018 15:16:55 +0200 +Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols + +We no longer need to select which SoCs are supported as the whole arch +code is always built. So lets drop all the SoC symbols + +Signed-off-by: John Crispin +--- + arch/mips/Kconfig | 2 ++ + arch/mips/ath79/Kconfig | 44 +++++--------------------------------------- + arch/mips/pci/Makefile | 2 +- + 3 files changed, 8 insertions(+), 40 deletions(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -257,6 +257,8 @@ config ATH79 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT_UART_PROM ++ select HAVE_PCI ++ select USB_ARCH_HAS_EHCI + select USE_OF + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM + help +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1,48 +1,14 @@ + # SPDX-License-Identifier: GPL-2.0 + if ATH79 + +-config SOC_AR71XX +- select HAVE_PCI +- def_bool n +- +-config SOC_AR724X +- select HAVE_PCI +- select PCI_AR724X if PCI +- def_bool n +- +-config SOC_AR913X +- def_bool n +- +-config SOC_AR933X +- def_bool n +- +-config SOC_AR934X +- select HAVE_PCI +- select PCI_AR724X if PCI +- def_bool n +- +-config SOC_QCA955X +- select HAVE_PCI +- select PCI_AR724X if PCI ++config PCI_AR71XX ++ bool "PCI support for AR7100 type SoCs" ++ depends on PCI + def_bool n + + config PCI_AR724X +- def_bool n +- +-config ATH79_DEV_GPIO_BUTTONS +- def_bool n +- +-config ATH79_DEV_LEDS_GPIO +- def_bool n +- +-config ATH79_DEV_SPI +- def_bool n +- +-config ATH79_DEV_USB +- def_bool n +- +-config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) ++ bool "PCI support for AR724x type SoCs" ++ depends on PCI + def_bool n + + endif +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o + obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o +-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o ++obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o + obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o + # diff --git a/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch new file mode 100644 index 0000000000..ebb240d4ae --- /dev/null +++ b/target/linux/ath79/patches-6.1/400-mtd-nor-support-mtd-name-from-device-tree.patch @@ -0,0 +1,53 @@ +From f32bc2aa01edcba2f2ed5db151cf183eac9ef919 Mon Sep 17 00:00:00 2001 +From: Abhimanyu Vishwakarma +Date: Sat, 25 Feb 2017 16:42:50 +0000 +Subject: mtd: nor: support mtd name from device tree + +Signed-off-by: Abhimanyu Vishwakarma +--- + drivers/mtd/spi-nor/spi-nor.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/core.c ++++ b/drivers/mtd/spi-nor/core.c +@@ -2964,12 +2964,19 @@ static void spi_nor_set_mtd_info(struct + { + struct mtd_info *mtd = &nor->mtd; + struct device *dev = nor->dev; ++ struct device_node *np = spi_nor_get_flash_node(nor); ++ const char __maybe_unused *of_mtd_name = NULL; + + spi_nor_set_mtd_locking_ops(nor); + spi_nor_set_mtd_otp_ops(nor); + + mtd->dev.parent = dev; +- if (!mtd->name) ++#ifdef CONFIG_MTD_OF_PARTS ++ of_property_read_string(np, "linux,mtd-name", &of_mtd_name); ++#endif ++ if (of_mtd_name) ++ mtd->name = of_mtd_name; ++ else if (!mtd->name) + mtd->name = dev_name(dev); + mtd->type = MTD_NORFLASH; + mtd->flags = MTD_CAP_NORFLASH; +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -863,6 +863,17 @@ out_error: + */ + static void mtd_set_dev_defaults(struct mtd_info *mtd) + { ++#ifdef CONFIG_MTD_OF_PARTS ++ const char __maybe_unused *of_mtd_name = NULL; ++ struct device_node *np; ++ ++ np = mtd_get_of_node(mtd); ++ if (np && !mtd->name) { ++ of_property_read_string(np, "linux,mtd-name", &of_mtd_name); ++ if (of_mtd_name) ++ mtd->name = of_mtd_name; ++ } else ++#endif + if (mtd->dev.parent) { + if (!mtd->owner && mtd->dev.parent->driver) + mtd->owner = mtd->dev.parent->driver->owner; diff --git a/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch new file mode 100644 index 0000000000..d0e8aec0d5 --- /dev/null +++ b/target/linux/ath79/patches-6.1/410-mtd-cybertan-trx-parser.patch @@ -0,0 +1,45 @@ +From: Christian Lamparter +Subject: [PATCH] ath79: port cybertan_part from ar71xx + +This patch ports the cybertan_part code from ar71xx and converts the +driver to a DT-supported mtd parser. As a result, it will no longer +add the u-boot, nvram and art partitions, which were never part of +the special Cybertan header. + +Instead these partitions have to be specified in the DT, which has the +upside of making it possible to add properties (i.e.: read-only), labels +and references to these important partitions. + +Submitted-by: Christian Lamparter +--- + drivers/mtd/parsers/Makefile | 1 + + drivers/mtd/parsers/Kconfig | 8 ++++++++ + 2 files changed, 9 insertions(+) + +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -9,6 +9,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + ofpart-y += ofpart_core.o + ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908) += ofpart_bcm4908.o + ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o ++obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o + obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER) += tplink_safeloader.o +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -112,6 +112,14 @@ config MTD_OF_PARTS_LINKSYS_NS + two "firmware" partitions. Currently used firmware has to be detected + using CFE environment variable. + ++config MTD_PARSER_CYBERTAN ++ tristate "Parser for Cybertan format partitions" ++ depends on MTD && (ATH79 || COMPILE_TEST) ++ help ++ Cybertan has a proprietory header than encompasses a Broadcom trx ++ header. This driver will parse the header and take care of the ++ special offsets that result in the extra headers. ++ + config MTD_PARSER_IMAGETAG + tristate "Parser for BCM963XX Image Tag format partitions" + depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST diff --git a/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch new file mode 100644 index 0000000000..0cd96909eb --- /dev/null +++ b/target/linux/ath79/patches-6.1/420-drivers-link-spi-before-mtd.patch @@ -0,0 +1,20 @@ +From: Gabor Juhos +Subject: [PATCH] ar71xx: Link SPI before MTD + +SVN-Revision: 22863 +--- + drivers/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -80,8 +80,8 @@ obj-y += scsi/ + obj-y += nvme/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPMI) += spmi/ + obj-$(CONFIG_HSI) += hsi/ + obj-$(CONFIG_SLIMBUS) += slimbus/ diff --git a/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch b/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch new file mode 100644 index 0000000000..184c39d469 --- /dev/null +++ b/target/linux/ath79/patches-6.1/430-mtd-ar934x-nand-driver.patch @@ -0,0 +1,34 @@ +From: Gabor Juhos +Subject: ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x + +SVN-Revision: 33385 +--- + drivers/mtd/nand/raw/Kconfig | 8 ++++++++ + drivers/mtd/nand/raw/Makefile | 1 + + 2 files changed, 9 insertions(+) + +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -557,4 +557,12 @@ config MTD_NAND_DISKONCHIP_BBTWRITE + load time (assuming you build diskonchip as a module) with the module + parameter "inftl_bbt_write=1". + ++config MTD_NAND_AR934X ++ tristate "Support for NAND controller on Qualcomm Atheros AR934x/QCA955x SoCs" ++ depends on ATH79 || COMPILE_TEST ++ depends on HAS_IOMEM ++ help ++ Enables support for NAND controller on Qualcomm Atheros SoCs. ++ This controller is found on AR934x and QCA955x SoCs. ++ + endif # MTD_RAW_NAND +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_INTEL_LGM) += inte + obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rockchip-nand-controller.o + obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o + obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o ++obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o + + nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o + nand-objs += nand_onfi.o diff --git a/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch new file mode 100644 index 0000000000..21b655a109 --- /dev/null +++ b/target/linux/ath79/patches-6.1/700-phy-add-ath79-usb-phys.patch @@ -0,0 +1,333 @@ +From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 6 Mar 2018 10:04:05 +0100 +Subject: [PATCH 04/27] phy: add ath79 usb phys + +Signed-off-by: John Crispin +--- + drivers/phy/Kconfig | 16 ++++++ + drivers/phy/Makefile | 2 + + drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++ + drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++ + 4 files changed, 250 insertions(+) + create mode 100644 drivers/phy/phy-ar7100-usb.c + create mode 100644 drivers/phy/phy-ar7200-usb.c + +--- a/drivers/phy/Kconfig ++++ b/drivers/phy/Kconfig +@@ -24,6 +24,22 @@ config GENERIC_PHY_MIPI_DPHY + Provides a number of helpers a core functions for MIPI D-PHY + drivers to us. + ++config PHY_AR7100_USB ++ tristate "Atheros AR7100 USB PHY driver" ++ depends on ATH79 || COMPILE_TEST ++ default y if USB_EHCI_HCD_PLATFORM ++ select GENERIC_PHY ++ help ++ Enable this to support the USB PHY on Atheros AR7100 SoCs. ++ ++config PHY_AR7200_USB ++ tristate "Atheros AR7200 USB PHY driver" ++ depends on ATH79 || COMPILE_TEST ++ default y if USB_EHCI_HCD_PLATFORM ++ select GENERIC_PHY ++ help ++ Enable this to support the USB PHY on Atheros AR7200 SoCs. ++ + config PHY_LPC18XX_USB_OTG + tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) +--- a/drivers/phy/Makefile ++++ b/drivers/phy/Makefile +@@ -4,6 +4,8 @@ + # + + obj-$(CONFIG_GENERIC_PHY) += phy-core.o ++obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o ++obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o + obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o + obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o + obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o +--- /dev/null ++++ b/drivers/phy/phy-ar7100-usb.c +@@ -0,0 +1,140 @@ ++/* ++ * Copyright (C) 2018 John Crispin ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++struct ar7100_usb_phy { ++ struct reset_control *rst_phy; ++ struct reset_control *rst_host; ++ struct reset_control *rst_ohci_dll; ++ void __iomem *io_base; ++ struct phy *phy; ++ int gpio; ++}; ++ ++static int ar7100_usb_phy_power_off(struct phy *phy) ++{ ++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ err |= reset_control_assert(priv->rst_host); ++ err |= reset_control_assert(priv->rst_phy); ++ err |= reset_control_assert(priv->rst_ohci_dll); ++ ++ return err; ++} ++ ++static int ar7100_usb_phy_power_on(struct phy *phy) ++{ ++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ err |= ar7100_usb_phy_power_off(phy); ++ mdelay(100); ++ err |= reset_control_deassert(priv->rst_ohci_dll); ++ err |= reset_control_deassert(priv->rst_phy); ++ err |= reset_control_deassert(priv->rst_host); ++ mdelay(500); ++ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG); ++ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ); ++ ++ return err; ++} ++ ++static const struct phy_ops ar7100_usb_phy_ops = { ++ .power_on = ar7100_usb_phy_power_on, ++ .power_off = ar7100_usb_phy_power_off, ++ .owner = THIS_MODULE, ++}; ++ ++static int ar7100_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct phy_provider *phy_provider; ++ struct resource *res; ++ struct ar7100_usb_phy *priv; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ priv->io_base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->io_base)) ++ return PTR_ERR(priv->io_base); ++ ++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); ++ if (IS_ERR(priv->rst_phy)) { ++ dev_err(&pdev->dev, "phy reset is missing\n"); ++ return PTR_ERR(priv->rst_phy); ++ } ++ ++ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host"); ++ if (IS_ERR(priv->rst_host)) { ++ dev_err(&pdev->dev, "host reset is missing\n"); ++ return PTR_ERR(priv->rst_host); ++ } ++ ++ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll"); ++ if (IS_ERR(priv->rst_ohci_dll)) { ++ dev_err(&pdev->dev, "ohci-dll reset is missing\n"); ++ return PTR_ERR(priv->rst_host); ++ } ++ ++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops); ++ if (IS_ERR(priv->phy)) { ++ dev_err(&pdev->dev, "failed to create PHY\n"); ++ return PTR_ERR(priv->phy); ++ } ++ ++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); ++ if (priv->gpio >= 0) { ++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); ++ ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request gpio\n"); ++ return ret; ++ } ++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); ++ gpio_set_value(priv->gpio, 1); ++ } ++ ++ phy_set_drvdata(priv->phy, priv); ++ ++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); ++ ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static const struct of_device_id ar7100_usb_phy_of_match[] = { ++ { .compatible = "qca,ar7100-usb-phy" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match); ++ ++static struct platform_driver ar7100_usb_phy_driver = { ++ .probe = ar7100_usb_phy_probe, ++ .driver = { ++ .of_match_table = ar7100_usb_phy_of_match, ++ .name = "ar7100-usb-phy", ++ } ++}; ++module_platform_driver(ar7100_usb_phy_driver); ++ ++MODULE_DESCRIPTION("ATH79 USB PHY driver"); ++MODULE_AUTHOR("Alban Bedel "); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/phy/phy-ar7200-usb.c +@@ -0,0 +1,136 @@ ++/* ++ * Copyright (C) 2015 Alban Bedel ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++struct ar7200_usb_phy { ++ struct reset_control *rst_phy; ++ struct reset_control *rst_phy_analog; ++ struct reset_control *suspend_override; ++ struct phy *phy; ++ int gpio; ++}; ++ ++static int ar7200_usb_phy_power_on(struct phy *phy) ++{ ++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ if (priv->suspend_override) ++ err = reset_control_assert(priv->suspend_override); ++ if (priv->rst_phy) ++ err |= reset_control_deassert(priv->rst_phy); ++ if (priv->rst_phy_analog) ++ err |= reset_control_deassert(priv->rst_phy_analog); ++ ++ return err; ++} ++ ++static int ar7200_usb_phy_power_off(struct phy *phy) ++{ ++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy); ++ int err = 0; ++ ++ if (priv->suspend_override) ++ err = reset_control_deassert(priv->suspend_override); ++ if (priv->rst_phy) ++ err |= reset_control_assert(priv->rst_phy); ++ if (priv->rst_phy_analog) ++ err |= reset_control_assert(priv->rst_phy_analog); ++ ++ return err; ++} ++ ++static const struct phy_ops ar7200_usb_phy_ops = { ++ .power_on = ar7200_usb_phy_power_on, ++ .power_off = ar7200_usb_phy_power_off, ++ .owner = THIS_MODULE, ++}; ++ ++static int ar7200_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct phy_provider *phy_provider; ++ struct ar7200_usb_phy *priv; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy"); ++ if (IS_ERR(priv->rst_phy)) { ++ if (PTR_ERR(priv->rst_phy) != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "phy reset is missing\n"); ++ return PTR_ERR(priv->rst_phy); ++ } ++ ++ priv->rst_phy_analog = devm_reset_control_get_optional( ++ &pdev->dev, "usb-phy-analog"); ++ if (IS_ERR(priv->rst_phy_analog)) { ++ if (PTR_ERR(priv->rst_phy_analog) == -ENOENT) ++ priv->rst_phy_analog = NULL; ++ else ++ return PTR_ERR(priv->rst_phy_analog); ++ } ++ ++ priv->suspend_override = devm_reset_control_get_optional( ++ &pdev->dev, "usb-suspend-override"); ++ if (IS_ERR(priv->suspend_override)) { ++ if (PTR_ERR(priv->suspend_override) == -ENOENT) ++ priv->suspend_override = NULL; ++ else ++ return PTR_ERR(priv->suspend_override); ++ } ++ ++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops); ++ if (IS_ERR(priv->phy)) { ++ dev_err(&pdev->dev, "failed to create PHY\n"); ++ return PTR_ERR(priv->phy); ++ } ++ ++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0); ++ if (priv->gpio >= 0) { ++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev)); ++ ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request gpio\n"); ++ return ret; ++ } ++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev)); ++ gpio_set_value(priv->gpio, 1); ++ } ++ ++ phy_set_drvdata(priv->phy, priv); ++ ++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static const struct of_device_id ar7200_usb_phy_of_match[] = { ++ { .compatible = "qca,ar7200-usb-phy" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match); ++ ++static struct platform_driver ar7200_usb_phy_driver = { ++ .probe = ar7200_usb_phy_probe, ++ .driver = { ++ .of_match_table = ar7200_usb_phy_of_match, ++ .name = "ar7200-usb-phy", ++ } ++}; ++module_platform_driver(ar7200_usb_phy_driver); ++ ++MODULE_DESCRIPTION("ATH79 USB PHY driver"); ++MODULE_AUTHOR("Alban Bedel "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch new file mode 100644 index 0000000000..293a359884 --- /dev/null +++ b/target/linux/ath79/patches-6.1/701-usb-add-more-OF-quirk-properties.patch @@ -0,0 +1,24 @@ +From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 6 Mar 2018 10:01:43 +0100 +Subject: [PATCH 05/27] usb: add more OF/quirk properties + +Signed-off-by: John Crispin +--- + drivers/usb/host/ehci-platform.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -274,6 +274,11 @@ static int ehci_platform_probe(struct pl + ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { ++ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset); ++ ++ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug")) ++ pdata->has_synopsys_hc_bug = 1; ++ + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ehci->big_endian_mmio = 1; + diff --git a/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch b/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch new file mode 100644 index 0000000000..54e64fb11c --- /dev/null +++ b/target/linux/ath79/patches-6.1/710-net-use-downstream-ag71xx.patch @@ -0,0 +1,42 @@ +From: John Crispin +Subject: [PATCH] ath79: add new OF only target for QCA MIPS silicon + +This target aims to replace ar71xx mid-term. The big part that is still +missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik +subtargets will follow. + +Submitted-by: John Crispin +--- + drivers/net/ethernet/atheros/Kconfig | 8 +------- + drivers/net/ethernet/atheros/Makefile | 2 +- + 2 files changed, 2 insertions(+), 8 deletions(-) + +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -17,14 +17,7 @@ config NET_VENDOR_ATHEROS + + if NET_VENDOR_ATHEROS + +-config AG71XX +- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support" +- depends on ATH79 +- select PHYLINK +- imply NET_SELFTESTS +- help +- If you wish to compile a kernel for AR7XXX/91XXX and enable +- ethernet support, then you should always answer Y to this. ++source "drivers/net/ethernet/atheros/ag71xx/Kconfig" + + config ATL2 + tristate "Atheros L2 Fast Ethernet support" +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -3,7 +3,7 @@ + # Makefile for the Atheros network device drivers. + # + +-obj-$(CONFIG_AG71XX) += ag71xx.o ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_ATL1) += atlx/ + obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch new file mode 100644 index 0000000000..5363bb37b0 --- /dev/null +++ b/target/linux/ath79/patches-6.1/720-mdio_bitbang_ignore_ta_value.patch @@ -0,0 +1,44 @@ +From: Jonas Gorski +Subject: ar71xx: add a workaround for ar8316 not always driving the TA bit to low + +AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit +to low despite returning a valid value. Ignore it and just use the +returned value anyway. + +SVN-Revision: 28422 +--- + drivers/net/mdio/mdio-bitbang.c | 16 ++----------------- + 1 file changed, 2 insertions(+), 14 deletions(-) + +--- a/drivers/net/mdio/mdio-bitbang.c ++++ b/drivers/net/mdio/mdio-bitbang.c +@@ -152,7 +152,7 @@ static int mdiobb_cmd_addr(struct mdiobb + int mdiobb_read(struct mii_bus *bus, int phy, int reg) + { + struct mdiobb_ctrl *ctrl = bus->priv; +- int ret, i; ++ int ret; + + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); +@@ -162,19 +162,7 @@ int mdiobb_read(struct mii_bus *bus, int + + ctrl->ops->set_mdio_dir(ctrl, 0); + +- /* check the turnaround bit: the PHY should be driving it to zero, if this +- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that +- */ +- if (mdiobb_get_bit(ctrl) != 0 && +- !(bus->phy_ignore_ta_mask & (1 << phy))) { +- /* PHY didn't drive TA low -- flush any bits it +- * may be trying to send. +- */ +- for (i = 0; i < 32; i++) +- mdiobb_get_bit(ctrl); +- +- return 0xffff; +- } ++ mdiobb_get_bit(ctrl); + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); diff --git a/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch new file mode 100644 index 0000000000..e37d9a1f63 --- /dev/null +++ b/target/linux/ath79/patches-6.1/721-phy-mdio-bitbang-prevent-rescheduling-during-command.patch @@ -0,0 +1,61 @@ +From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 16 Jun 2015 13:15:08 +0200 +Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command + +It seems some phys have some maximum timings for accessing the MDIO line, +resulting in bit errors under cpu stress. Prevent this from happening by +disabling interrupts when sending commands. + +Signed-off-by: Jonas Gorski +--- + drivers/net/mdio/mdio-bitbang.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/net/mdio/mdio-bitbang.c ++++ b/drivers/net/mdio/mdio-bitbang.c +@@ -14,6 +14,7 @@ + * Vitaly Bordug + */ + ++#include + #include + #include + #include +@@ -153,7 +154,9 @@ int mdiobb_read(struct mii_bus *bus, int + { + struct mdiobb_ctrl *ctrl = bus->priv; + int ret; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg); +@@ -166,6 +169,7 @@ int mdiobb_read(struct mii_bus *bus, int + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); + return ret; + } + EXPORT_SYMBOL(mdiobb_read); +@@ -173,7 +177,9 @@ EXPORT_SYMBOL(mdiobb_read); + int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) + { + struct mdiobb_ctrl *ctrl = bus->priv; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg); +@@ -188,6 +194,8 @@ int mdiobb_write(struct mii_bus *bus, in + + ctrl->ops->set_mdio_dir(ctrl, 0); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); ++ + return 0; + } + EXPORT_SYMBOL(mdiobb_write); diff --git a/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch b/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch new file mode 100644 index 0000000000..02f763534e --- /dev/null +++ b/target/linux/ath79/patches-6.1/730-ar8216-make-reg-access-atomic.patch @@ -0,0 +1,59 @@ +From b3797d1a92afe97c173b00fdb7824cedba24eef0 Mon Sep 17 00:00:00 2001 +From: Chuanhong Guo +Date: Sun, 20 Sep 2020 01:00:45 +0800 +Subject: [PATCH] ath79: ar8216: make switch register access atomic + +due to some unknown reason these register accesses sometimes fail +on the integrated switch without this patch. + +THIS ONLY WORKS ON ATH79 AND MAY BREAK THE DRIVER ON OTHER PLATFORMS! +The mdio bus on ath79 works in polling mode and doesn't rely on +any interrupt. This patch breaks the driver on any mdio master +with interrupts used. + +--- +--- a/drivers/net/phy/ar8216.c ++++ b/drivers/net/phy/ar8216.c +@@ -252,6 +252,7 @@ ar8xxx_mii_write32(struct ar8xxx_priv *p + u32 + ar8xxx_read(struct ar8xxx_priv *priv, int reg) + { ++ unsigned long flags; + struct mii_bus *bus = priv->mii_bus; + u16 r1, r2, page; + u32 val; +@@ -259,11 +260,13 @@ ar8xxx_read(struct ar8xxx_priv *priv, in + split_addr((u32) reg, &r1, &r2, &page); + + mutex_lock(&bus->mdio_lock); ++ local_irq_save(flags); + + bus->write(bus, 0x18, 0, page); + wait_for_page_switch(); + val = ar8xxx_mii_read32(priv, 0x10 | r2, r1); + ++ local_irq_restore(flags); + mutex_unlock(&bus->mdio_lock); + + return val; +@@ -272,17 +275,20 @@ ar8xxx_read(struct ar8xxx_priv *priv, in + void + ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val) + { ++ unsigned long flags; + struct mii_bus *bus = priv->mii_bus; + u16 r1, r2, page; + + split_addr((u32) reg, &r1, &r2, &page); + + mutex_lock(&bus->mdio_lock); ++ local_irq_save(flags); + + bus->write(bus, 0x18, 0, page); + wait_for_page_switch(); + ar8xxx_mii_write32(priv, 0x10 | r2, r1, val); + ++ local_irq_restore(flags); + mutex_unlock(&bus->mdio_lock); + } + diff --git a/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch new file mode 100644 index 0000000000..0002b9b95b --- /dev/null +++ b/target/linux/ath79/patches-6.1/800-leds-add-reset-controller-based-driver.patch @@ -0,0 +1,186 @@ +From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 6 Mar 2018 10:03:03 +0100 +Subject: [PATCH 03/27] leds: add reset-controller based driver + +Signed-off-by: John Crispin +--- + drivers/leds/Kconfig | 11 ++++ + drivers/leds/Makefile | 1 + + drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 149 insertions(+) + create mode 100644 drivers/leds/leds-reset.c + +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -874,6 +874,17 @@ source "drivers/leds/flash/Kconfig" + comment "RGB LED drivers" + source "drivers/leds/rgb/Kconfig" + ++config LEDS_RESET ++ tristate "LED support for reset-controller API" ++ depends on LEDS_CLASS ++ depends on RESET_CONTROLLER ++ help ++ This option enables support for LEDs connected to pins driven by reset ++ controllers. Yes, DNI actual built HW like that. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called leds-reset. ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- /dev/null ++++ b/drivers/leds/leds-reset.c +@@ -0,0 +1,140 @@ ++/* ++ * Copyright (C) 2018 John Crispin ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct reset_led_data { ++ struct led_classdev cdev; ++ struct reset_control *rst; ++}; ++ ++static inline struct reset_led_data * ++ cdev_to_reset_led_data(struct led_classdev *led_cdev) ++{ ++ return container_of(led_cdev, struct reset_led_data, cdev); ++} ++ ++static void reset_led_set(struct led_classdev *led_cdev, ++ enum led_brightness value) ++{ ++ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev); ++ ++ if (value == LED_OFF) ++ reset_control_assert(led_dat->rst); ++ else ++ reset_control_deassert(led_dat->rst); ++} ++ ++struct reset_leds_priv { ++ int num_leds; ++ struct reset_led_data leds[]; ++}; ++ ++static inline int sizeof_reset_leds_priv(int num_leds) ++{ ++ return sizeof(struct reset_leds_priv) + ++ (sizeof(struct reset_led_data) * num_leds); ++} ++ ++static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fwnode_handle *child; ++ struct reset_leds_priv *priv; ++ int count, ret; ++ ++ count = device_get_child_node_count(dev); ++ if (!count) ++ return ERR_PTR(-ENODEV); ++ ++ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL); ++ if (!priv) ++ return ERR_PTR(-ENOMEM); ++ ++ device_for_each_child_node(dev, child) { ++ struct reset_led_data *led = &priv->leds[priv->num_leds]; ++ struct device_node *np = to_of_node(child); ++ ++ ret = fwnode_property_read_string(child, "label", &led->cdev.name); ++ if (!led->cdev.name) { ++ fwnode_handle_put(child); ++ return ERR_PTR(-EINVAL); ++ } ++ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0, true); ++ if (IS_ERR(led->rst)) ++ return ERR_PTR(-EINVAL); ++ ++ fwnode_property_read_string(child, "linux,default-trigger", ++ &led->cdev.default_trigger); ++ ++ led->cdev.brightness_set = reset_led_set; ++ ret = devm_led_classdev_register(&pdev->dev, &led->cdev); ++ if (ret < 0) ++ return ERR_PTR(ret); ++ led->cdev.dev->of_node = np; ++ priv->num_leds++; ++ } ++ ++ return priv; ++} ++ ++static const struct of_device_id of_reset_leds_match[] = { ++ { .compatible = "reset-leds", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_reset_leds_match); ++ ++static int reset_led_probe(struct platform_device *pdev) ++{ ++ struct reset_leds_priv *priv; ++ ++ priv = reset_leds_create(pdev); ++ if (IS_ERR(priv)) ++ return PTR_ERR(priv); ++ ++ platform_set_drvdata(pdev, priv); ++ ++ return 0; ++} ++ ++static void reset_led_shutdown(struct platform_device *pdev) ++{ ++ struct reset_leds_priv *priv = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i = 0; i < priv->num_leds; i++) { ++ struct reset_led_data *led = &priv->leds[i]; ++ ++ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN)) ++ reset_led_set(&led->cdev, LED_OFF); ++ } ++} ++ ++static struct platform_driver reset_led_driver = { ++ .probe = reset_led_probe, ++ .shutdown = reset_led_shutdown, ++ .driver = { ++ .name = "leds-reset", ++ .of_match_table = of_reset_leds_match, ++ }, ++}; ++ ++module_platform_driver(reset_led_driver); ++ ++MODULE_AUTHOR("John Crispin "); ++MODULE_DESCRIPTION("reset controller LED driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:leds-reset"); +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds + obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o ++obj-$(CONFIG_LEDS_RESET) += leds-reset.o + + # LED SPI Drivers + obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch b/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch new file mode 100644 index 0000000000..980c265fe6 --- /dev/null +++ b/target/linux/ath79/patches-6.1/810-ath79-ignore-the-abused-interrupt-map-on-pcie-node.patch @@ -0,0 +1,33 @@ +From: Shiji Yang +Date: Wed, 31 May 2023 00:15:23 +0000 +Subject: [PATCH] ath79: ignore the abused interrupt-map on pcie node + +ath79 PCIe interrupt controller has stopped working correctly. This +is because the DT exposing a non-sensical interrupt-map property, +and their drivers relying on the kernel ignoring this property[1]. + +This patch fix the pcie init error: +ath9k 0000:00:00.0: of_irq_parse_pci: failed with rc=-14 + +Notice: +This is just a workaround, not a fix. PCIe driver and related dts +node need to be rewritten. + +[1] https://lore.kernel.org/all/20211201114102.13446-1-maz@kernel.org/ + +Signed-off-by: Shiji Yang +--- + drivers/of/irq.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/of/irq.c ++++ b/drivers/of/irq.c +@@ -86,6 +86,8 @@ EXPORT_SYMBOL_GPL(of_irq_find_parent); + * drawing board. + */ + static const char * const of_irq_imap_abusers[] = { ++ "qca,ar7100-pci", ++ "qcom,ar7240-pci", + "CBEA,platform-spider-pic", + "sti,platform-spider-pic", + "realtek,rtl-intc", diff --git a/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch b/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch new file mode 100644 index 0000000000..6c97bc307c --- /dev/null +++ b/target/linux/ath79/patches-6.1/900-unaligned_access_hacks.patch @@ -0,0 +1,909 @@ +From: Felix Fietkau +Subject: [PATCH] ar71xx: fix unaligned access in a few more places + +SVN-Revision: 35130 +--- + arch/mips/include/asm/checksum.h | 83 +++--------------- + include/uapi/linux/ip.h | 2 +- + include/uapi/linux/ipv6.h | 2 +- + include/uapi/linux/tcp.h | 4 ++-- + include/uapi/linux/udp.h | 2 +- + net/netfilter/nf_conntrack_core.c | 4 ++-- + include/uapi/linux/icmp.h | 2 +- + include/uapi/linux/in6.h | 2 +- + net/ipv6/tcp_ipv6.c | 9 +++-- + net/ipv6/datagram.c | 6 ++-- + net/ipv6/exthdrs.c | 2 +- + include/linux/types.h | 5 +++ + net/ipv4/af_inet.c | 4 ++-- + net/ipv4/tcp_output.c | 69 +++++++++-------- + include/uapi/linux/igmp.h | 8 +++--- + net/core/flow_dissector.c | 2 +- + include/uapi/linux/icmpv6.h | 2 +- + include/net/ndisc.h | 10 ++++---- + net/sched/cls_u32.c | 6 +++--- + net/ipv6/ip6_offload.c | 2 +- + include/net/addrconf.h | 2 +- + include/net/inet_ecn.h | 4 ++-- + include/net/ipv6.h | 23 +++++---- + include/net/secure_seq.h | 1 + + include/uapi/linux/in.h | 2 +- + net/ipv6/ip6_fib.h | 2 +- + net/netfilter/nf_conntrack_proto_tcp.c | 2 +- + net/xfrm/xfrm_input.c | 4 ++-- + net/ipv4/tcp_input.c | 12 ++++--- + include/uapi/linux/if_pppox.h | 1 + + net/ipv6/netfilter/nf_log_ipv6.c | 4 ++-- + include/net/neighbour.h | 6 +++-- + include/uapi/linux/netfilter_arp/arp_tables.h | 2 +- + net/core/utils.c | 10 +++++-- + include/linux/etherdevice.h | 11 ++++--- + net/ipv4/tcp_offload.c | 6 +++--- + net/ipv6/netfilter/ip6table_mangle.c | 4 ++-- + 37 file changed, 171 insertions(+), 141 deletions(-) + +--- a/arch/mips/include/asm/checksum.h ++++ b/arch/mips/include/asm/checksum.h +@@ -100,26 +100,30 @@ static inline __sum16 ip_fast_csum(const + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = net_hdr_word(word++); ++ ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +@@ -179,74 +183,6 @@ static inline __sum16 ip_compute_csum(co + return csum_fold(csum_partial(buff, len, 0)); + } + +-#define _HAVE_ARCH_IPV6_CSUM +-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, +- const struct in6_addr *daddr, +- __u32 len, __u8 proto, +- __wsum sum) +-{ +- __wsum tmp; +- +- __asm__( +- " .set push # csum_ipv6_magic\n" +- " .set noreorder \n" +- " .set noat \n" +- " addu %0, %5 # proto (long in network byte order)\n" +- " sltu $1, %0, %5 \n" +- " addu %0, $1 \n" +- +- " addu %0, %6 # csum\n" +- " sltu $1, %0, %6 \n" +- " lw %1, 0(%2) # four words source address\n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 0(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " addu %0, $1 # Add final carry\n" +- " .set pop" +- : "=&r" (sum), "=&r" (tmp) +- : "r" (saddr), "r" (daddr), +- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum) +- : "memory"); +- +- return csum_fold(sum); +-} +- + #include + #endif /* CONFIG_GENERIC_CSUM */ + +--- a/include/uapi/linux/ip.h ++++ b/include/uapi/linux/ip.h +@@ -106,7 +106,7 @@ struct iphdr { + __be32 daddr; + ); + /*The options start here. */ +-}; ++} __attribute__((packed, aligned(2))); + + + struct ip_auth_hdr { +--- a/include/uapi/linux/ipv6.h ++++ b/include/uapi/linux/ipv6.h +@@ -135,7 +135,7 @@ struct ipv6hdr { + struct in6_addr saddr; + struct in6_addr daddr; + ); +-}; ++} __attribute__((packed, aligned(2))); + + + /* index values for the variables in ipv6_devconf */ +--- a/include/uapi/linux/tcp.h ++++ b/include/uapi/linux/tcp.h +@@ -55,7 +55,7 @@ struct tcphdr { + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __attribute__((packed, aligned(2))); + + /* + * The union cast uses a gcc extension to avoid aliasing problems +@@ -65,7 +65,7 @@ struct tcphdr { + union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +-}; ++} __attribute__((packed, aligned(2))); + + #define tcp_flag_word(tp) (((union tcp_word_hdr *)(tp))->words[3]) + +--- a/include/uapi/linux/udp.h ++++ b/include/uapi/linux/udp.h +@@ -25,7 +25,7 @@ struct udphdr { + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __attribute__((packed, aligned(2))); + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ +--- a/net/netfilter/nf_conntrack_core.c ++++ b/net/netfilter/nf_conntrack_core.c +@@ -308,8 +308,8 @@ nf_ct_get_tuple(const struct sk_buff *sk + + switch (l3num) { + case NFPROTO_IPV4: +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = net_hdr_word(ap++); ++ tuple->dst.u3.ip = net_hdr_word(ap); + break; + case NFPROTO_IPV6: + memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6)); +--- a/include/uapi/linux/icmp.h ++++ b/include/uapi/linux/icmp.h +@@ -102,7 +102,7 @@ struct icmphdr { + } frag; + __u8 reserved[4]; + } un; +-}; ++} __attribute__((packed, aligned(2))); + + + /* +--- a/include/uapi/linux/in6.h ++++ b/include/uapi/linux/in6.h +@@ -43,7 +43,7 @@ struct in6_addr { + #define s6_addr16 in6_u.u6_addr16 + #define s6_addr32 in6_u.u6_addr32 + #endif +-}; ++} __attribute__((packed, aligned(2))); + #endif /* __UAPI_DEF_IN6_ADDR */ + + #if __UAPI_DEF_SOCKADDR_IN6 +--- a/net/ipv6/tcp_ipv6.c ++++ b/net/ipv6/tcp_ipv6.c +@@ -35,6 +35,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -901,10 +902,10 @@ static void tcp_v6_send_response(const s + topt = (__be32 *)(t1 + 1); + + if (tsecr) { +- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); +- *topt++ = htonl(tsval); +- *topt++ = htonl(tsecr); ++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); ++ put_unaligned_be32(tsval, topt++); ++ put_unaligned_be32(tsecr, topt++); + } + + if (mrst) +--- a/include/linux/ipv6.h ++++ b/include/linux/ipv6.h +@@ -6,6 +6,7 @@ + + #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) + #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) ++ + /* + * This structure contains configuration options per IPv6 link. + */ +--- a/net/ipv6/datagram.c ++++ b/net/ipv6/datagram.c +@@ -497,7 +497,7 @@ int ipv6_recv_error(struct sock *sk, str + ipv6_iface_scope_id(&sin->sin6_addr, + IP6CB(skb)->iif); + } else { +- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), ++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), + &sin->sin6_addr); + sin->sin6_scope_id = 0; + } +@@ -851,12 +851,12 @@ int ip6_datagram_send_ctl(struct net *ne + } + + if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { +- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { ++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { + err = -EINVAL; + goto exit_f; + } + } +- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); ++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); + break; + + case IPV6_2292HOPOPTS: +--- a/net/ipv6/exthdrs.c ++++ b/net/ipv6/exthdrs.c +@@ -1013,7 +1013,7 @@ static bool ipv6_hop_jumbo(struct sk_buf + goto drop; + } + +- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); ++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); + if (pkt_len <= IPV6_MAXPLEN) { + icmpv6_param_prob_reason(skb, ICMPV6_HDR_FIELD, optoff + 2, + SKB_DROP_REASON_IP_INHDR); +--- a/include/linux/types.h ++++ b/include/linux/types.h +@@ -232,5 +232,11 @@ typedef void (*swap_func_t)(void *a, voi + typedef int (*cmp_r_func_t)(const void *a, const void *b, const void *priv); + typedef int (*cmp_func_t)(const void *a, const void *b); + ++struct net_hdr_word { ++ u32 words[1]; ++} __attribute__((packed, aligned(2))); ++ ++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) ++ + #endif /* __ASSEMBLY__ */ + #endif /* _LINUX_TYPES_H */ +--- a/net/ipv4/af_inet.c ++++ b/net/ipv4/af_inet.c +@@ -1515,8 +1515,8 @@ struct sk_buff *inet_gro_receive(struct + if (unlikely(ip_fast_csum((u8 *)iph, 5))) + goto out; + +- id = ntohl(*(__be32 *)&iph->id); +- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); ++ id = ntohl(net_hdr_word(&iph->id)); ++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); + id >>= 16; + + list_for_each_entry(p, head, list) { +--- a/net/ipv4/tcp_output.c ++++ b/net/ipv4/tcp_output.c +@@ -612,48 +612,53 @@ static void tcp_options_write(struct tcp + u16 options = opts->options; /* mungable copy */ + + if (unlikely(OPTION_MD5 & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); + /* overload cookie hash location */ + opts->hash_location = (__u8 *)ptr; + ptr += 4; + } + + if (unlikely(opts->mss)) { +- *ptr++ = htonl((TCPOPT_MSS << 24) | +- (TCPOLEN_MSS << 16) | +- opts->mss); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | ++ opts->mss); + } + + if (likely(OPTION_TS & options)) { + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | +- (TCPOLEN_SACK_PERM << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_SACK_PERM << 24) | ++ (TCPOLEN_SACK_PERM << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + options &= ~OPTION_SACK_ADVERTISE; + } else { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + } +- *ptr++ = htonl(opts->tsval); +- *ptr++ = htonl(opts->tsecr); ++ net_hdr_word(ptr++) = htonl(opts->tsval); ++ net_hdr_word(ptr++) = htonl(opts->tsecr); + } + + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK_PERM << 8) | +- TCPOLEN_SACK_PERM); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK_PERM << 8) | ++ TCPOLEN_SACK_PERM); + } + + if (unlikely(OPTION_WSCALE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_WINDOW << 16) | +- (TCPOLEN_WINDOW << 8) | +- opts->ws); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_WINDOW << 16) | ++ (TCPOLEN_WINDOW << 8) | ++ opts->ws); + } + + if (unlikely(opts->num_sack_blocks)) { +@@ -661,16 +666,17 @@ static void tcp_options_write(struct tcp + tp->duplicate_sack : tp->selective_acks; + int this_sack; + +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK << 8) | +- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK << 8) | ++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * + TCPOLEN_SACK_PERBLOCK))); + + for (this_sack = 0; this_sack < opts->num_sack_blocks; + ++this_sack) { +- *ptr++ = htonl(sp[this_sack].start_seq); +- *ptr++ = htonl(sp[this_sack].end_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); + } + + tp->rx_opt.dsack = 0; +@@ -683,13 +689,14 @@ static void tcp_options_write(struct tcp + + if (foc->exp) { + len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; +- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) | ++ net_hdr_word(ptr) = ++ htonl((TCPOPT_EXP << 24) | (len << 16) | + TCPOPT_FASTOPEN_MAGIC); + p += TCPOLEN_EXP_FASTOPEN_BASE; + } else { + len = TCPOLEN_FASTOPEN_BASE + foc->len; +- *p++ = TCPOPT_FASTOPEN; +- *p++ = len; ++ net_hdr_word(p++) = TCPOPT_FASTOPEN; ++ net_hdr_word(p++) = len; + } + + memcpy(p, foc->val, foc->len); +--- a/include/uapi/linux/igmp.h ++++ b/include/uapi/linux/igmp.h +@@ -33,7 +33,7 @@ struct igmphdr { + __u8 code; /* For newer IGMP */ + __sum16 csum; + __be32 group; +-}; ++} __attribute__((packed, aligned(2))); + + /* V3 group record types [grec_type] */ + #define IGMPV3_MODE_IS_INCLUDE 1 +@@ -49,7 +49,7 @@ struct igmpv3_grec { + __be16 grec_nsrcs; + __be32 grec_mca; + __be32 grec_src[]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_report { + __u8 type; +@@ -58,7 +58,7 @@ struct igmpv3_report { + __be16 resv2; + __be16 ngrec; + struct igmpv3_grec grec[]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_query { + __u8 type; +@@ -79,7 +79,7 @@ struct igmpv3_query { + __u8 qqic; + __be16 nsrcs; + __be32 srcs[]; +-}; ++} __attribute__((packed, aligned(2))); + + #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ + #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ +--- a/net/core/flow_dissector.c ++++ b/net/core/flow_dissector.c +@@ -131,7 +131,7 @@ __be32 __skb_flow_get_ports(const struct + ports = __skb_header_pointer(skb, thoff + poff, + sizeof(_ports), data, hlen, &_ports); + if (ports) +- return *ports; ++ return (__be32)net_hdr_word(ports); + } + + return 0; +--- a/include/uapi/linux/icmpv6.h ++++ b/include/uapi/linux/icmpv6.h +@@ -78,7 +78,7 @@ struct icmp6hdr { + #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other + #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime + #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +-}; ++} __attribute__((packed, aligned(2))); + + + #define ICMPV6_ROUTER_PREF_LOW 0x3 +--- a/include/net/ndisc.h ++++ b/include/net/ndisc.h +@@ -93,7 +93,7 @@ struct ra_msg { + struct icmp6hdr icmph; + __be32 reachable_time; + __be32 retrans_timer; +-}; ++} __attribute__((packed, aligned(2))); + + struct rd_msg { + struct icmp6hdr icmph; +@@ -372,10 +372,10 @@ static inline u32 ndisc_hashfn(const voi + { + const u32 *p32 = pkey; + +- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + +- (p32[1] * hash_rnd[1]) + +- (p32[2] * hash_rnd[2]) + +- (p32[3] * hash_rnd[3])); ++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + ++ (net_hdr_word(&p32[1]) * hash_rnd[1]) + ++ (net_hdr_word(&p32[2]) * hash_rnd[2]) + ++ (net_hdr_word(&p32[3]) * hash_rnd[3])); + } + + static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) +--- a/net/sched/cls_u32.c ++++ b/net/sched/cls_u32.c +@@ -155,7 +155,7 @@ next_knode: + data = skb_header_pointer(skb, toff, 4, &hdata); + if (!data) + goto out; +- if ((*data ^ key->val) & key->mask) { ++ if ((net_hdr_word(data) ^ key->val) & key->mask) { + n = rcu_dereference_bh(n->next); + goto next_knode; + } +@@ -206,8 +206,8 @@ check_terminal: + &hdata); + if (!data) + goto out; +- sel = ht->divisor & u32_hash_fold(*data, &n->sel, +- n->fshift); ++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), ++ &n->sel, n->fshift); + } + if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) + goto next_ht; +--- a/net/ipv6/ip6_offload.c ++++ b/net/ipv6/ip6_offload.c +@@ -290,7 +290,7 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff * + continue; + + iph2 = (struct ipv6hdr *)(p->data + off); +- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; ++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); + + /* All fields must match except length and Traffic Class. + * XXX skbs on the gro_list have all been parsed and pulled +--- a/include/net/addrconf.h ++++ b/include/net/addrconf.h +@@ -52,7 +52,7 @@ struct prefix_info { + __be32 reserved2; + + struct in6_addr prefix; +-}; ++} __attribute__((packed, aligned(2))); + + /* rfc4861 4.6.2: IPv6 PIO is 32 bytes in size */ + static_assert(sizeof(struct prefix_info) == 32); +--- a/include/net/inet_ecn.h ++++ b/include/net/inet_ecn.h +@@ -138,9 +138,9 @@ static inline int IP6_ECN_set_ce(struct + if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) + return 0; + +- from = *(__be32 *)iph; ++ from = net_hdr_word(iph); + to = from | htonl(INET_ECN_CE << 20); +- *(__be32 *)iph = to; ++ net_hdr_word(iph) = to; + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), + (__force __wsum)to); +--- a/include/net/ipv6.h ++++ b/include/net/ipv6.h +@@ -149,7 +149,7 @@ struct frag_hdr { + __u8 reserved; + __be16 frag_off; + __be32 identification; +-}; ++} __attribute__((packed, aligned(2))); + + /* + * Jumbo payload option, as described in RFC 2675 2. +@@ -615,8 +615,8 @@ static inline void __ipv6_addr_set_half( + } + #endif + #endif +- addr[0] = wh; +- addr[1] = wl; ++ net_hdr_word(&addr[0]) = wh; ++ net_hdr_word(&addr[1]) = wl; + } + + static inline void ipv6_addr_set(struct in6_addr *addr, +@@ -675,6 +675,8 @@ static inline bool ipv6_prefix_equal(con + const __be32 *a1 = addr1->s6_addr32; + const __be32 *a2 = addr2->s6_addr32; + unsigned int pdw, pbi; ++ /* Used for last <32-bit fraction of prefix */ ++ u32 pbia1, pbia2; + + /* check complete u32 in prefix */ + pdw = prefixlen >> 5; +@@ -683,7 +685,9 @@ static inline bool ipv6_prefix_equal(con + + /* check incomplete u32 in prefix */ + pbi = prefixlen & 0x1f; +- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) ++ pbia1 = net_hdr_word(&a1[pdw]); ++ pbia2 = net_hdr_word(&a2[pdw]); ++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) + return false; + + return true; +@@ -805,13 +809,13 @@ static inline void ipv6_addr_set_v4mappe + */ + static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) + { +- const __be32 *a1 = token1, *a2 = token2; ++ const struct in6_addr *a1 = token1, *a2 = token2; + int i; + + addrlen >>= 2; + + for (i = 0; i < addrlen; i++) { +- __be32 xb = a1[i] ^ a2[i]; ++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; + if (xb) + return i * 32 + 31 - __fls(ntohl(xb)); + } +@@ -1005,17 +1009,18 @@ static inline u32 ip6_multipath_hash_fie + static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, + __be32 flowlabel) + { +- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; ++ net_hdr_word((__be32 *)hdr) = ++ htonl(0x60000000 | (tclass << 20)) | flowlabel; + } + + static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; + } + + static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; + } + + static inline u8 ip6_tclass(__be32 flowinfo) +--- a/include/net/secure_seq.h ++++ b/include/net/secure_seq.h +@@ -3,6 +3,7 @@ + #define _NET_SECURE_SEQ + + #include ++#include + + struct net; + +--- a/include/uapi/linux/in.h ++++ b/include/uapi/linux/in.h +@@ -91,7 +91,7 @@ enum { + /* Internet address. */ + struct in_addr { + __be32 s_addr; +-}; ++} __attribute__((packed, aligned(2))); + #endif + + #define IP_TOS 1 +--- a/net/ipv6/ip6_fib.c ++++ b/net/ipv6/ip6_fib.c +@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t + * See include/asm-generic/bitops/le.h. + */ + return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & +- addr[fn_bit >> 5]; ++ net_hdr_word(&addr[fn_bit >> 5]); + } + + struct fib6_info *fib6_info_alloc(gfp_t gfp_flags, bool with_fib6_nh) +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -406,7 +406,7 @@ static void tcp_sack(const struct sk_buf + + /* Fast path for timestamp-only option */ + if (length == TCPOLEN_TSTAMP_ALIGNED +- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) ++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) + | (TCPOPT_NOP << 16) + | (TCPOPT_TIMESTAMP << 8) + | TCPOLEN_TIMESTAMP)) +--- a/net/xfrm/xfrm_input.c ++++ b/net/xfrm/xfrm_input.c +@@ -168,8 +168,8 @@ int xfrm_parse_spi(struct sk_buff *skb, + if (!pskb_may_pull(skb, hlen)) + return -EINVAL; + +- *spi = *(__be32 *)(skb_transport_header(skb) + offset); +- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); ++ *spi = net_hdr_word(skb_transport_header(skb) + offset); ++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); + return 0; + } + EXPORT_SYMBOL(xfrm_parse_spi); +--- a/net/ipv4/tcp_input.c ++++ b/net/ipv4/tcp_input.c +@@ -4183,14 +4183,16 @@ static bool tcp_parse_aligned_timestamp( + { + const __be32 *ptr = (const __be32 *)(th + 1); + +- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) +- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { ++ if (net_hdr_word(ptr) == ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { + tp->rx_opt.saw_tstamp = 1; + ++ptr; +- tp->rx_opt.rcv_tsval = ntohl(*ptr); ++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); + ++ptr; +- if (*ptr) +- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; ++ if (net_hdr_word(ptr)) ++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - ++ tp->tsoffset; + else + tp->rx_opt.rcv_tsecr = 0; + return true; +--- a/include/uapi/linux/if_pppox.h ++++ b/include/uapi/linux/if_pppox.h +@@ -51,6 +51,7 @@ struct pppoe_addr { + */ + struct pptp_addr { + __u16 call_id; ++ __u16 pad; + struct in_addr sin_addr; + }; + +--- a/include/net/neighbour.h ++++ b/include/net/neighbour.h +@@ -286,8 +286,10 @@ static inline bool neigh_key_eq128(const + const u32 *n32 = (const u32 *)n->primary_key; + const u32 *p32 = pkey; + +- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | +- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0; ++ return ((n32[0] ^ net_hdr_word(&p32[0])) | ++ (n32[1] ^ net_hdr_word(&p32[1])) | ++ (n32[2] ^ net_hdr_word(&p32[2])) | ++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0; + } + + static inline struct neighbour *___neigh_lookup_noref( +--- a/include/uapi/linux/netfilter_arp/arp_tables.h ++++ b/include/uapi/linux/netfilter_arp/arp_tables.h +@@ -70,7 +70,7 @@ struct arpt_arp { + __u8 flags; + /* Inverse flags */ + __u16 invflags; +-}; ++} __attribute__((aligned(4))); + + /* Values for "flag" field in struct arpt_ip (general arp structure). + * No flags defined yet. +--- a/net/core/utils.c ++++ b/net/core/utils.c +@@ -460,8 +460,14 @@ void inet_proto_csum_replace16(__sum16 * + bool pseudohdr) + { + __be32 diff[] = { +- ~from[0], ~from[1], ~from[2], ~from[3], +- to[0], to[1], to[2], to[3], ++ ~net_hdr_word(&from[0]), ++ ~net_hdr_word(&from[1]), ++ ~net_hdr_word(&from[2]), ++ ~net_hdr_word(&from[3]), ++ net_hdr_word(&to[0]), ++ net_hdr_word(&to[1]), ++ net_hdr_word(&to[2]), ++ net_hdr_word(&to[3]), + }; + if (skb->ip_summed != CHECKSUM_PARTIAL) { + *sum = csum_fold(csum_partial(diff, sizeof(diff), +--- a/include/linux/etherdevice.h ++++ b/include/linux/etherdevice.h +@@ -555,7 +555,7 @@ static inline bool is_etherdev_addr(cons + * @b: Pointer to Ethernet header + * + * Compare two Ethernet headers, returns 0 if equal. +- * This assumes that the network header (i.e., IP header) is 4-byte ++ * This assumes that the network header (i.e., IP header) is 2-byte + * aligned OR the platform can handle unaligned access. This is the + * case for all packets coming into netif_receive_skb or similar + * entry points. +@@ -578,11 +578,12 @@ static inline unsigned long compare_ethe + fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6); + return fold; + #else +- u32 *a32 = (u32 *)((u8 *)a + 2); +- u32 *b32 = (u32 *)((u8 *)b + 2); ++ const u16 *a16 = a; ++ const u16 *b16 = b; + +- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) | +- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]); ++ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) | ++ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) | ++ (a16[6] ^ b16[6]); + #endif + } + +--- a/net/ipv4/tcp_offload.c ++++ b/net/ipv4/tcp_offload.c +@@ -62,7 +62,7 @@ static struct sk_buff *__tcpv4_gso_segme + th2 = tcp_hdr(seg->next); + iph2 = ip_hdr(seg->next); + +- if (!(*(const u32 *)&th->source ^ *(const u32 *)&th2->source) && ++ if (!(net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) && + iph->daddr == iph2->daddr && iph->saddr == iph2->saddr) + return segs; + +@@ -254,7 +254,7 @@ struct sk_buff *tcp_gro_lookup(struct li + continue; + + th2 = tcp_hdr(p); +- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) { ++ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) { + NAPI_GRO_CB(p)->same_flow = 0; + continue; + } +@@ -320,8 +320,8 @@ struct sk_buff *tcp_gro_receive(struct l + ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH)); + flush |= (__force int)(th->ack_seq ^ th2->ack_seq); + for (i = sizeof(*th); i < thlen; i += 4) +- flush |= *(u32 *)((u8 *)th + i) ^ +- *(u32 *)((u8 *)th2 + i); ++ flush |= net_hdr_word((u8 *)th + i) ^ ++ net_hdr_word((u8 *)th2 + i); + + /* When we receive our second frame we can made a decision on if we + * continue this flow as an atomic flow with a fixed ID or if we use +--- a/net/ipv6/netfilter/ip6table_mangle.c ++++ b/net/ipv6/netfilter/ip6table_mangle.c +@@ -44,7 +44,7 @@ ip6t_mangle_out(void *priv, struct sk_bu + hop_limit = ipv6_hdr(skb)->hop_limit; + + /* flowlabel and prio (includes version, which shouldn't change either */ +- flowlabel = *((u_int32_t *)ipv6_hdr(skb)); ++ flowlabel = net_hdr_word(ipv6_hdr(skb)); + + ret = ip6t_do_table(priv, skb, state); + +@@ -53,7 +53,7 @@ ip6t_mangle_out(void *priv, struct sk_bu + !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) || + skb->mark != mark || + ipv6_hdr(skb)->hop_limit != hop_limit || +- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) { ++ flowlabel != net_hdr_word(ipv6_hdr(skb)))) { + err = ip6_route_me_harder(state->net, state->sk, skb); + if (err < 0) + ret = NF_DROP_ERR(err); diff --git a/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch b/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch new file mode 100644 index 0000000000..536d7abf6b --- /dev/null +++ b/target/linux/ath79/patches-6.1/910-mikrotik-rb4xx.patch @@ -0,0 +1,121 @@ +From: Christopher Hill +Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers + +This adds 3 Mikrotik rb4xx series drivers as follows: + +rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device +that interfaces between the SoC SPI bus and its two children below. +rb4xx-gpio: This is the GPIO expander. +rb4xx-nand: This is the NAND driver. + +The history of this code comes in three phases. + +1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx +drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/. + +Module-author: Gabor Juhos +Module-author: Imre Kaloz +Module-author: Bert Vermeulen + +2. Next several ar71xx patches were applied bringing the code current. + +commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c +Submitted-by: Hauke Mehrtens + +commit af79fdbe4af32a287798b579141204bda056b8aa +commit 889272d92db689fd9c910243635e44c9d8323095 +commit e21cb649a235180563363b8af5ba8296b9ac0baa +commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f +Submitted-by: Felix Fietkau + +3. Finally a heavy refactor to split the driver into the three new +subsystems, and updated to work with the device tree configuration, plus +updates and review feedback incorporated + +Reviewed-by: Thibaut VARÈNE +Submitted-by: Christopher Hill +--- + drivers/mfd/Kconfig | 8 ++++++++ + drivers/mfd/Makefile | 1 + + drivers/gpio/Kconfig | 6 ++++++ + drivers/gpio/Makefile | 1 + + drivers/mtd/nand/raw/Kconfig | 7 +++++++ + drivers/mtd/nand/raw/Makefile | 1 + + 6 files changed, 24 insertions(+) + +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -2209,6 +2209,14 @@ config RAVE_SP_CORE + Select this to get support for the Supervisory Processor + device found on several devices in RAVE line of hardware. + ++config MFD_RB4XX_CPLD ++ tristate "CPLD driver for Mikrotik RB4xx series boards" ++ select MFD_CORE ++ depends on ATH79 || COMPILE_TEST ++ help ++ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik ++ Routerboard RB4xx series. ++ + config SGI_MFD_IOC3 + bool "SGI IOC3 core driver" + depends on PCI && MIPS && 64BIT +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -269,6 +269,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas- + obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o + obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o + ++obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o + obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o + obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o + obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1594,6 +1594,12 @@ config GPIO_SODAVILLE + help + Say Y here to support Intel Sodaville GPIO. + ++config GPIO_RB4XX ++ tristate "GPIO expander for Mikrotik RB4xx series boards" ++ depends on MFD_RB4XX_CPLD ++ help ++ GPIO driver for Mikrotik Routerboard RB4xx series. ++ + endmenu + + menu "SPI GPIO expanders" +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -123,6 +123,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061. + obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o + obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o ++obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o + obj-$(CONFIG_GPIO_RDA) += gpio-rda.o +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -565,4 +565,11 @@ config MTD_NAND_AR934X + Enables support for NAND controller on Qualcomm Atheros SoCs. + This controller is found on AR934x and QCA955x SoCs. + ++config MTD_NAND_RB4XX ++ tristate "Support for NAND driver for Mikrotik RB4xx series boards" ++ depends on MFD_RB4XX_CPLD ++ help ++ Enables support for the NAND flash chip on Mikrotik Routerboard ++ RB4xx series. ++ + endif # MTD_RAW_NAND +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock + obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o + obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o + obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o + + nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o + nand-objs += nand_onfi.o diff --git a/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch b/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch new file mode 100644 index 0000000000..677428fa65 --- /dev/null +++ b/target/linux/ath79/patches-6.1/911-mikrotik-rb91x.patch @@ -0,0 +1,96 @@ +From: Denis Kalashnikov +Subject: [PATCH] ath79: add support for reset key on MikroTik RB912UAG-2HPnD + +On MikroTik RB91x board series a reset key shares SoC gpio +line #15 with NAND ALE and NAND IO7. So we need a custom +gpio driver to manage this non-trivial connection schema. +Also rb91x-nand needs to have an ability to disable a polling +of the key while it works with NAND. + +While we've been integrating rb91x-key into a firmware, we've +figured out that: +* In the gpio-latch driver we need to add a "cansleep" suffix to +several gpiolib calls, +* When gpio-latch and rb91x-nand fail to get a gpio and an error +is -EPROBE_DEFER, they shouldn't report about this, since this +actually is not an error and occurs when the gpio-latch probe +function is called before the rb91x-key probe. +We fix these related things here too. + +Submitted-by: Denis Kalashnikov +Reviewed-by: Sergey Ryazanov +Tested-by: Koen Vandeputte +--- + drivers/gpio/Kconfig | 11 +++++++++++ + drivers/gpio/Makefile | 2 ++ + drivers/mtd/nand/raw/Kconfig | 6 ++++++ + drivers/mtd/nand/raw/Makefile | 1 + + 7 files changed, 20 insertions(+) + +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -368,6 +368,12 @@ config GPIO_IXP4XX + + If unsure, say N. + ++config GPIO_LATCH_MIKROTIK ++ tristate "MikroTik RouterBOARD GPIO latch support" ++ depends on ATH79 ++ help ++ GPIO driver for latch on some MikroTik RouterBOARDs. ++ + config GPIO_LOGICVC + tristate "Xylon LogiCVC GPIO support" + depends on MFD_SYSCON && OF +@@ -544,6 +550,10 @@ config GPIO_ROCKCHIP + help + Say yes here to support GPIO on Rockchip SoCs. + ++config GPIO_RB91X_KEY ++ tristate "MikroTik RB91x board series reset key support" ++ depends on ATH79 ++ + config GPIO_SAMA5D2_PIOBU + tristate "SAMA5D2 PIOBU GPIO support" + depends on MFD_SYSCON +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -76,6 +76,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o + obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o + obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o + obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o ++obj-$(CONFIG_GPIO_LATCH_MIKROTIK) += gpio-latch-mikrotik.o + obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o + obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o + obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o +@@ -124,6 +125,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o + obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o + obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o ++obj-$(CONFIG_GPIO_RB91X_KEY) += gpio-rb91x-key.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o + obj-$(CONFIG_GPIO_RDA) += gpio-rda.o +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -572,4 +572,10 @@ config MTD_NAND_RB4XX + Enables support for the NAND flash chip on Mikrotik Routerboard + RB4xx series. + ++config MTD_NAND_RB91X ++ tristate "MikroTik RB91x NAND driver support" ++ depends on ATH79 && MTD_RAW_NAND ++ help ++ Enables support for the NAND flash chip on MikroTik RB91x series. ++ + endif # MTD_RAW_NAND +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -61,6 +61,7 @@ obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-n + obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o + obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o ++obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o + + nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o + nand-objs += nand_onfi.o