From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Mon, 7 Jun 2010 19:20:29 +0000 (-0400)
Subject: omap3: Calculate CS1 size only when SDRC is
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d11212e3772c8fe43a1f487bbf58f3341118a241;p=project%2Fbcm63xx%2Fu-boot.git

omap3: Calculate CS1 size only when SDRC is

initialized for CS1

From: Vaibhav Hiremath <hvaibhav@ti.com>

The patch makes sure that size for SDRC CS1 gets calculated
only when the CS1 SDRC is initialized.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
---

diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/arm_cortexa8/omap3/board.c
index 7b78fa448b..69a08fd5fb 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/board.c
+++ b/arch/arm/cpu/arm_cortexa8/omap3/board.c
@@ -282,6 +282,8 @@ int dram_init(void)
 	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int size0 = 0, size1 = 0;
 
+	size0 = get_sdr_cs_size(CS0);
+
 	/*
 	 * If a second bank of DDR is attached to CS1 this is
 	 * where it can be started.  Early init code will init
@@ -290,10 +292,9 @@ int dram_init(void)
 	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
 		do_sdrc_init(CS1, NOT_EARLY);
 		make_cs1_contiguous();
-	}
 
-	size0 = get_sdr_cs_size(CS0);
-	size1 = get_sdr_cs_size(CS1);
+		size1 = get_sdr_cs_size(CS1);
+	}
 
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = size0;