From: Tejun Heo Date: Wed, 16 Nov 2005 07:56:49 +0000 (+0900) Subject: [PATCH] sil24: add constants X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d10cb35a876c72b4b6711a366e341a1e4d8aa709;p=openwrt%2Fstaging%2Fblogic.git [PATCH] sil24: add constants Adds constants for ATAPI support to sata_sil24. This patch is originally from Jeff Garzik . Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 55e744d6db88..cb1933a3bd55 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -139,6 +139,7 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ PORT_CS_RESUME = (1 << 6), /* port resume */ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ @@ -188,11 +189,29 @@ enum { PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + /* * Other constants */ SGE_TRM = (1 << 31), /* Last SGE in chain */ - PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ /* board id */ BID_SIL3124 = 0,