From: NeilBrown Date: Tue, 1 Dec 2009 06:30:59 +0000 (+1100) Subject: md: revert incorrect fix for read error handling in raid1. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d0e260782c3702a009645c3caa02e381dab8798b;p=openwrt%2Fstaging%2Fblogic.git md: revert incorrect fix for read error handling in raid1. commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown Cc: stable@kernel.org --- diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a053423785c9..e07ce2e033a9 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1650,11 +1650,12 @@ static void raid1d(mddev_t *mddev) r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } + } else + md_error(mddev, + conf->mirrors[r1_bio->read_disk].rdev); bio = r1_bio->bios[r1_bio->read_disk]; - if ((disk=read_balance(conf, r1_bio)) == -1 || - disk == r1_bio->read_disk) { + if ((disk=read_balance(conf, r1_bio)) == -1) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" " read error for block %llu\n", bdevname(bio->bi_bdev,b),