From: Claudiu Beznea Date: Thu, 15 Sep 2022 14:37:27 +0000 (+0300) Subject: at91: kernel v5.15: remove upstreamed patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d0d7771262843bd72bc9ea5441ce73750fd872ff;p=openwrt%2Fstaging%2Fnbd.git at91: kernel v5.15: remove upstreamed patches Remove patches that are now integrated in kernel v5.15. Signed-off-by: Claudiu Beznea --- diff --git a/target/linux/at91/patches-5.15/100-clk-at91-re-factor-clocks-suspend-resume.patch b/target/linux/at91/patches-5.15/100-clk-at91-re-factor-clocks-suspend-resume.patch new file mode 100644 index 0000000000..5d399f6535 --- /dev/null +++ b/target/linux/at91/patches-5.15/100-clk-at91-re-factor-clocks-suspend-resume.patch @@ -0,0 +1,1342 @@ +From 65bb4687b2a5c6f02f44345540c3389d6e7523e7 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:05 +0300 +Subject: [PATCH 234/247] clk: at91: re-factor clocks suspend/resume + +SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where +most of the SoC's components are powered off (including PMC). Resuming +from this mode is done with the help of bootloader. Peripherals are not +aware of the power saving mode thus most of them are disabling clocks in +proper suspend API and re-enable them in resume API without taking into +account the previously setup rate. Moreover some of the peripherals are +acting as wakeup sources and are not disabling the clocks in this +scenario, when suspending. Since backup mode cuts the power for +peripherals, in resume part these clocks needs to be re-configured. + +The initial PMC suspend/resume code was designed only for SAMA5D2's PMC +(as it was the only one supporting backup mode). SAMA7G supports also +backup mode and its PMC is different (few new functionalities, different +registers offsets, different offsets in registers for each +functionalities). To address both SAMA5D2 and SAMA7G5 PMC add +.save_context()/.resume_context() support to each clocks driver and call +this from PMC driver. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/clk-generated.c | 46 +++++-- + drivers/clk/at91/clk-main.c | 66 ++++++++++ + drivers/clk/at91/clk-master.c | 194 ++++++++++++++++++++++++++-- + drivers/clk/at91/clk-peripheral.c | 40 +++++- + drivers/clk/at91/clk-pll.c | 39 ++++++ + drivers/clk/at91/clk-programmable.c | 29 ++++- + drivers/clk/at91/clk-sam9x60-pll.c | 68 +++++++++- + drivers/clk/at91/clk-system.c | 20 +++ + drivers/clk/at91/clk-usb.c | 27 ++++ + drivers/clk/at91/clk-utmi.c | 39 ++++++ + drivers/clk/at91/pmc.c | 147 +-------------------- + drivers/clk/at91/pmc.h | 24 ++-- + 12 files changed, 558 insertions(+), 181 deletions(-) + +--- a/drivers/clk/at91/clk-generated.c ++++ b/drivers/clk/at91/clk-generated.c +@@ -27,6 +27,7 @@ struct clk_generated { + u32 id; + u32 gckdiv; + const struct clk_pcr_layout *layout; ++ struct at91_clk_pms pms; + u8 parent_id; + int chg_pid; + }; +@@ -34,25 +35,35 @@ struct clk_generated { + #define to_clk_generated(hw) \ + container_of(hw, struct clk_generated, hw) + +-static int clk_generated_enable(struct clk_hw *hw) ++static int clk_generated_set(struct clk_generated *gck, int status) + { +- struct clk_generated *gck = to_clk_generated(hw); + unsigned long flags; +- +- pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n", +- __func__, gck->gckdiv, gck->parent_id); ++ unsigned int enable = status ? AT91_PMC_PCR_GCKEN : 0; + + spin_lock_irqsave(gck->lock, flags); + regmap_write(gck->regmap, gck->layout->offset, + (gck->id & gck->layout->pid_mask)); + regmap_update_bits(gck->regmap, gck->layout->offset, + AT91_PMC_PCR_GCKDIV_MASK | gck->layout->gckcss_mask | +- gck->layout->cmd | AT91_PMC_PCR_GCKEN, ++ gck->layout->cmd | enable, + field_prep(gck->layout->gckcss_mask, gck->parent_id) | + gck->layout->cmd | + FIELD_PREP(AT91_PMC_PCR_GCKDIV_MASK, gck->gckdiv) | +- AT91_PMC_PCR_GCKEN); ++ enable); + spin_unlock_irqrestore(gck->lock, flags); ++ ++ return 0; ++} ++ ++static int clk_generated_enable(struct clk_hw *hw) ++{ ++ struct clk_generated *gck = to_clk_generated(hw); ++ ++ pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n", ++ __func__, gck->gckdiv, gck->parent_id); ++ ++ clk_generated_set(gck, 1); ++ + return 0; + } + +@@ -249,6 +260,23 @@ static int clk_generated_set_rate(struct + return 0; + } + ++static int clk_generated_save_context(struct clk_hw *hw) ++{ ++ struct clk_generated *gck = to_clk_generated(hw); ++ ++ gck->pms.status = clk_generated_is_enabled(&gck->hw); ++ ++ return 0; ++} ++ ++static void clk_generated_restore_context(struct clk_hw *hw) ++{ ++ struct clk_generated *gck = to_clk_generated(hw); ++ ++ if (gck->pms.status) ++ clk_generated_set(gck, gck->pms.status); ++} ++ + static const struct clk_ops generated_ops = { + .enable = clk_generated_enable, + .disable = clk_generated_disable, +@@ -258,6 +286,8 @@ static const struct clk_ops generated_op + .get_parent = clk_generated_get_parent, + .set_parent = clk_generated_set_parent, + .set_rate = clk_generated_set_rate, ++ .save_context = clk_generated_save_context, ++ .restore_context = clk_generated_restore_context, + }; + + /** +@@ -324,8 +354,6 @@ at91_clk_register_generated(struct regma + if (ret) { + kfree(gck); + hw = ERR_PTR(ret); +- } else { +- pmc_register_id(id); + } + + return hw; +--- a/drivers/clk/at91/clk-main.c ++++ b/drivers/clk/at91/clk-main.c +@@ -28,6 +28,7 @@ + struct clk_main_osc { + struct clk_hw hw; + struct regmap *regmap; ++ struct at91_clk_pms pms; + }; + + #define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw) +@@ -37,6 +38,7 @@ struct clk_main_rc_osc { + struct regmap *regmap; + unsigned long frequency; + unsigned long accuracy; ++ struct at91_clk_pms pms; + }; + + #define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw) +@@ -51,6 +53,7 @@ struct clk_rm9200_main { + struct clk_sam9x5_main { + struct clk_hw hw; + struct regmap *regmap; ++ struct at91_clk_pms pms; + u8 parent; + }; + +@@ -120,10 +123,29 @@ static int clk_main_osc_is_prepared(stru + return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp); + } + ++static int clk_main_osc_save_context(struct clk_hw *hw) ++{ ++ struct clk_main_osc *osc = to_clk_main_osc(hw); ++ ++ osc->pms.status = clk_main_osc_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void clk_main_osc_restore_context(struct clk_hw *hw) ++{ ++ struct clk_main_osc *osc = to_clk_main_osc(hw); ++ ++ if (osc->pms.status) ++ clk_main_osc_prepare(hw); ++} ++ + static const struct clk_ops main_osc_ops = { + .prepare = clk_main_osc_prepare, + .unprepare = clk_main_osc_unprepare, + .is_prepared = clk_main_osc_is_prepared, ++ .save_context = clk_main_osc_save_context, ++ .restore_context = clk_main_osc_restore_context, + }; + + struct clk_hw * __init +@@ -240,12 +262,31 @@ static unsigned long clk_main_rc_osc_rec + return osc->accuracy; + } + ++static int clk_main_rc_osc_save_context(struct clk_hw *hw) ++{ ++ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); ++ ++ osc->pms.status = clk_main_rc_osc_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void clk_main_rc_osc_restore_context(struct clk_hw *hw) ++{ ++ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); ++ ++ if (osc->pms.status) ++ clk_main_rc_osc_prepare(hw); ++} ++ + static const struct clk_ops main_rc_osc_ops = { + .prepare = clk_main_rc_osc_prepare, + .unprepare = clk_main_rc_osc_unprepare, + .is_prepared = clk_main_rc_osc_is_prepared, + .recalc_rate = clk_main_rc_osc_recalc_rate, + .recalc_accuracy = clk_main_rc_osc_recalc_accuracy, ++ .save_context = clk_main_rc_osc_save_context, ++ .restore_context = clk_main_rc_osc_restore_context, + }; + + struct clk_hw * __init +@@ -465,12 +506,37 @@ static u8 clk_sam9x5_main_get_parent(str + return clk_main_parent_select(status); + } + ++static int clk_sam9x5_main_save_context(struct clk_hw *hw) ++{ ++ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); ++ ++ clkmain->pms.status = clk_main_rc_osc_is_prepared(&clkmain->hw); ++ clkmain->pms.parent = clk_sam9x5_main_get_parent(&clkmain->hw); ++ ++ return 0; ++} ++ ++static void clk_sam9x5_main_restore_context(struct clk_hw *hw) ++{ ++ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); ++ int ret; ++ ++ ret = clk_sam9x5_main_set_parent(hw, clkmain->pms.parent); ++ if (ret) ++ return; ++ ++ if (clkmain->pms.status) ++ clk_sam9x5_main_prepare(hw); ++} ++ + static const struct clk_ops sam9x5_main_ops = { + .prepare = clk_sam9x5_main_prepare, + .is_prepared = clk_sam9x5_main_is_prepared, + .recalc_rate = clk_sam9x5_main_recalc_rate, + .set_parent = clk_sam9x5_main_set_parent, + .get_parent = clk_sam9x5_main_get_parent, ++ .save_context = clk_sam9x5_main_save_context, ++ .restore_context = clk_sam9x5_main_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/clk-master.c ++++ b/drivers/clk/at91/clk-master.c +@@ -37,6 +37,7 @@ struct clk_master { + spinlock_t *lock; + const struct clk_master_layout *layout; + const struct clk_master_characteristics *characteristics; ++ struct at91_clk_pms pms; + u32 *mux_table; + u32 mckr; + int chg_pid; +@@ -112,10 +113,52 @@ static unsigned long clk_master_div_reca + return rate; + } + ++static int clk_master_div_save_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ struct clk_hw *parent_hw = clk_hw_get_parent(hw); ++ unsigned long flags; ++ unsigned int mckr, div; ++ ++ spin_lock_irqsave(master->lock, flags); ++ regmap_read(master->regmap, master->layout->offset, &mckr); ++ spin_unlock_irqrestore(master->lock, flags); ++ ++ mckr &= master->layout->mask; ++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ div = master->characteristics->divisors[div]; ++ ++ master->pms.parent_rate = clk_hw_get_rate(parent_hw); ++ master->pms.rate = DIV_ROUND_CLOSEST(master->pms.parent_rate, div); ++ ++ return 0; ++} ++ ++static void clk_master_div_restore_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ unsigned long flags; ++ unsigned int mckr; ++ u8 div; ++ ++ spin_lock_irqsave(master->lock, flags); ++ regmap_read(master->regmap, master->layout->offset, &mckr); ++ spin_unlock_irqrestore(master->lock, flags); ++ ++ mckr &= master->layout->mask; ++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ div = master->characteristics->divisors[div]; ++ ++ if (div != DIV_ROUND_CLOSEST(master->pms.parent_rate, master->pms.rate)) ++ pr_warn("MCKR DIV not configured properly by firmware!\n"); ++} ++ + static const struct clk_ops master_div_ops = { + .prepare = clk_master_prepare, + .is_prepared = clk_master_is_prepared, + .recalc_rate = clk_master_div_recalc_rate, ++ .save_context = clk_master_div_save_context, ++ .restore_context = clk_master_div_restore_context, + }; + + static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate, +@@ -125,7 +168,9 @@ static int clk_master_div_set_rate(struc + const struct clk_master_characteristics *characteristics = + master->characteristics; + unsigned long flags; ++ unsigned int mckr, tmp; + int div, i; ++ int ret; + + div = DIV_ROUND_CLOSEST(parent_rate, rate); + if (div > ARRAY_SIZE(characteristics->divisors)) +@@ -145,11 +190,24 @@ static int clk_master_div_set_rate(struc + return -EINVAL; + + spin_lock_irqsave(master->lock, flags); +- regmap_update_bits(master->regmap, master->layout->offset, +- (MASTER_DIV_MASK << MASTER_DIV_SHIFT), +- (div << MASTER_DIV_SHIFT)); ++ ret = regmap_read(master->regmap, master->layout->offset, &mckr); ++ if (ret) ++ goto unlock; ++ ++ tmp = mckr & master->layout->mask; ++ tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ if (tmp == div) ++ goto unlock; ++ ++ mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT); ++ mckr |= (div << MASTER_DIV_SHIFT); ++ ret = regmap_write(master->regmap, master->layout->offset, mckr); ++ if (ret) ++ goto unlock; ++ + while (!clk_master_ready(master)) + cpu_relax(); ++unlock: + spin_unlock_irqrestore(master->lock, flags); + + return 0; +@@ -197,12 +255,25 @@ static int clk_master_div_determine_rate + return 0; + } + ++static void clk_master_div_restore_context_chg(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ int ret; ++ ++ ret = clk_master_div_set_rate(hw, master->pms.rate, ++ master->pms.parent_rate); ++ if (ret) ++ pr_warn("Failed to restore MCK DIV clock\n"); ++} ++ + static const struct clk_ops master_div_ops_chg = { + .prepare = clk_master_prepare, + .is_prepared = clk_master_is_prepared, + .recalc_rate = clk_master_div_recalc_rate, + .determine_rate = clk_master_div_determine_rate, + .set_rate = clk_master_div_set_rate, ++ .save_context = clk_master_div_save_context, ++ .restore_context = clk_master_div_restore_context_chg, + }; + + static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, +@@ -272,7 +343,8 @@ static int clk_master_pres_set_rate(stru + { + struct clk_master *master = to_clk_master(hw); + unsigned long flags; +- unsigned int pres; ++ unsigned int pres, mckr, tmp; ++ int ret; + + pres = DIV_ROUND_CLOSEST(parent_rate, rate); + if (pres > MASTER_PRES_MAX) +@@ -284,15 +356,27 @@ static int clk_master_pres_set_rate(stru + pres = ffs(pres) - 1; + + spin_lock_irqsave(master->lock, flags); +- regmap_update_bits(master->regmap, master->layout->offset, +- (MASTER_PRES_MASK << master->layout->pres_shift), +- (pres << master->layout->pres_shift)); ++ ret = regmap_read(master->regmap, master->layout->offset, &mckr); ++ if (ret) ++ goto unlock; ++ ++ mckr &= master->layout->mask; ++ tmp = (mckr >> master->layout->pres_shift) & MASTER_PRES_MASK; ++ if (pres == tmp) ++ goto unlock; ++ ++ mckr &= ~(MASTER_PRES_MASK << master->layout->pres_shift); ++ mckr |= (pres << master->layout->pres_shift); ++ ret = regmap_write(master->regmap, master->layout->offset, mckr); ++ if (ret) ++ goto unlock; + + while (!clk_master_ready(master)) + cpu_relax(); ++unlock: + spin_unlock_irqrestore(master->lock, flags); + +- return 0; ++ return ret; + } + + static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw, +@@ -330,11 +414,68 @@ static u8 clk_master_pres_get_parent(str + return mckr & AT91_PMC_CSS; + } + ++static int clk_master_pres_save_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ struct clk_hw *parent_hw = clk_hw_get_parent(hw); ++ unsigned long flags; ++ unsigned int val, pres; ++ ++ spin_lock_irqsave(master->lock, flags); ++ regmap_read(master->regmap, master->layout->offset, &val); ++ spin_unlock_irqrestore(master->lock, flags); ++ ++ val &= master->layout->mask; ++ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; ++ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres) ++ pres = 3; ++ else ++ pres = (1 << pres); ++ ++ master->pms.parent = val & AT91_PMC_CSS; ++ master->pms.parent_rate = clk_hw_get_rate(parent_hw); ++ master->pms.rate = DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres); ++ ++ return 0; ++} ++ ++static void clk_master_pres_restore_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ unsigned long flags; ++ unsigned int val, pres; ++ ++ spin_lock_irqsave(master->lock, flags); ++ regmap_read(master->regmap, master->layout->offset, &val); ++ spin_unlock_irqrestore(master->lock, flags); ++ ++ val &= master->layout->mask; ++ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; ++ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres) ++ pres = 3; ++ else ++ pres = (1 << pres); ++ ++ if (master->pms.rate != ++ DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres) || ++ (master->pms.parent != (val & AT91_PMC_CSS))) ++ pr_warn("MCKR PRES was not configured properly by firmware!\n"); ++} ++ ++static void clk_master_pres_restore_context_chg(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ ++ clk_master_pres_set_rate(hw, master->pms.rate, master->pms.parent_rate); ++} ++ + static const struct clk_ops master_pres_ops = { + .prepare = clk_master_prepare, + .is_prepared = clk_master_is_prepared, + .recalc_rate = clk_master_pres_recalc_rate, + .get_parent = clk_master_pres_get_parent, ++ .save_context = clk_master_pres_save_context, ++ .restore_context = clk_master_pres_restore_context, + }; + + static const struct clk_ops master_pres_ops_chg = { +@@ -344,6 +485,8 @@ static const struct clk_ops master_pres_ + .recalc_rate = clk_master_pres_recalc_rate, + .get_parent = clk_master_pres_get_parent, + .set_rate = clk_master_pres_set_rate, ++ .save_context = clk_master_pres_save_context, ++ .restore_context = clk_master_pres_restore_context_chg, + }; + + static struct clk_hw * __init +@@ -539,20 +682,21 @@ static int clk_sama7g5_master_set_parent + return 0; + } + +-static int clk_sama7g5_master_enable(struct clk_hw *hw) ++static void clk_sama7g5_master_set(struct clk_master *master, ++ unsigned int status) + { +- struct clk_master *master = to_clk_master(hw); + unsigned long flags; + unsigned int val, cparent; ++ unsigned int enable = status ? PMC_MCR_EN : 0; + + spin_lock_irqsave(master->lock, flags); + + regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id)); + regmap_read(master->regmap, PMC_MCR, &val); + regmap_update_bits(master->regmap, PMC_MCR, +- PMC_MCR_EN | PMC_MCR_CSS | PMC_MCR_DIV | ++ enable | PMC_MCR_CSS | PMC_MCR_DIV | + PMC_MCR_CMD | PMC_MCR_ID_MSK, +- PMC_MCR_EN | (master->parent << PMC_MCR_CSS_SHIFT) | ++ enable | (master->parent << PMC_MCR_CSS_SHIFT) | + (master->div << MASTER_DIV_SHIFT) | + PMC_MCR_CMD | PMC_MCR_ID(master->id)); + +@@ -563,6 +707,13 @@ static int clk_sama7g5_master_enable(str + cpu_relax(); + + spin_unlock_irqrestore(master->lock, flags); ++} ++ ++static int clk_sama7g5_master_enable(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ ++ clk_sama7g5_master_set(master, 1); + + return 0; + } +@@ -620,6 +771,23 @@ static int clk_sama7g5_master_set_rate(s + return 0; + } + ++static int clk_sama7g5_master_save_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ ++ master->pms.status = clk_sama7g5_master_is_enabled(hw); ++ ++ return 0; ++} ++ ++static void clk_sama7g5_master_restore_context(struct clk_hw *hw) ++{ ++ struct clk_master *master = to_clk_master(hw); ++ ++ if (master->pms.status) ++ clk_sama7g5_master_set(master, master->pms.status); ++} ++ + static const struct clk_ops sama7g5_master_ops = { + .enable = clk_sama7g5_master_enable, + .disable = clk_sama7g5_master_disable, +@@ -629,6 +797,8 @@ static const struct clk_ops sama7g5_mast + .set_rate = clk_sama7g5_master_set_rate, + .get_parent = clk_sama7g5_master_get_parent, + .set_parent = clk_sama7g5_master_set_parent, ++ .save_context = clk_sama7g5_master_save_context, ++ .restore_context = clk_sama7g5_master_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/clk-peripheral.c ++++ b/drivers/clk/at91/clk-peripheral.c +@@ -37,6 +37,7 @@ struct clk_sam9x5_peripheral { + u32 id; + u32 div; + const struct clk_pcr_layout *layout; ++ struct at91_clk_pms pms; + bool auto_div; + int chg_pid; + }; +@@ -155,10 +156,11 @@ static void clk_sam9x5_peripheral_autodi + periph->div = shift; + } + +-static int clk_sam9x5_peripheral_enable(struct clk_hw *hw) ++static int clk_sam9x5_peripheral_set(struct clk_sam9x5_peripheral *periph, ++ unsigned int status) + { +- struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); + unsigned long flags; ++ unsigned int enable = status ? AT91_PMC_PCR_EN : 0; + + if (periph->id < PERIPHERAL_ID_MIN) + return 0; +@@ -168,15 +170,21 @@ static int clk_sam9x5_peripheral_enable( + (periph->id & periph->layout->pid_mask)); + regmap_update_bits(periph->regmap, periph->layout->offset, + periph->layout->div_mask | periph->layout->cmd | +- AT91_PMC_PCR_EN, ++ enable, + field_prep(periph->layout->div_mask, periph->div) | +- periph->layout->cmd | +- AT91_PMC_PCR_EN); ++ periph->layout->cmd | enable); + spin_unlock_irqrestore(periph->lock, flags); + + return 0; + } + ++static int clk_sam9x5_peripheral_enable(struct clk_hw *hw) ++{ ++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); ++ ++ return clk_sam9x5_peripheral_set(periph, 1); ++} ++ + static void clk_sam9x5_peripheral_disable(struct clk_hw *hw) + { + struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); +@@ -393,6 +401,23 @@ static int clk_sam9x5_peripheral_set_rat + return -EINVAL; + } + ++static int clk_sam9x5_peripheral_save_context(struct clk_hw *hw) ++{ ++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); ++ ++ periph->pms.status = clk_sam9x5_peripheral_is_enabled(hw); ++ ++ return 0; ++} ++ ++static void clk_sam9x5_peripheral_restore_context(struct clk_hw *hw) ++{ ++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); ++ ++ if (periph->pms.status) ++ clk_sam9x5_peripheral_set(periph, periph->pms.status); ++} ++ + static const struct clk_ops sam9x5_peripheral_ops = { + .enable = clk_sam9x5_peripheral_enable, + .disable = clk_sam9x5_peripheral_disable, +@@ -400,6 +425,8 @@ static const struct clk_ops sam9x5_perip + .recalc_rate = clk_sam9x5_peripheral_recalc_rate, + .round_rate = clk_sam9x5_peripheral_round_rate, + .set_rate = clk_sam9x5_peripheral_set_rate, ++ .save_context = clk_sam9x5_peripheral_save_context, ++ .restore_context = clk_sam9x5_peripheral_restore_context, + }; + + static const struct clk_ops sam9x5_peripheral_chg_ops = { +@@ -409,6 +436,8 @@ static const struct clk_ops sam9x5_perip + .recalc_rate = clk_sam9x5_peripheral_recalc_rate, + .determine_rate = clk_sam9x5_peripheral_determine_rate, + .set_rate = clk_sam9x5_peripheral_set_rate, ++ .save_context = clk_sam9x5_peripheral_save_context, ++ .restore_context = clk_sam9x5_peripheral_restore_context, + }; + + struct clk_hw * __init +@@ -460,7 +489,6 @@ at91_clk_register_sam9x5_peripheral(stru + hw = ERR_PTR(ret); + } else { + clk_sam9x5_peripheral_autodiv(periph); +- pmc_register_id(id); + } + + return hw; +--- a/drivers/clk/at91/clk-pll.c ++++ b/drivers/clk/at91/clk-pll.c +@@ -40,6 +40,7 @@ struct clk_pll { + u16 mul; + const struct clk_pll_layout *layout; + const struct clk_pll_characteristics *characteristics; ++ struct at91_clk_pms pms; + }; + + static inline bool clk_pll_ready(struct regmap *regmap, int id) +@@ -260,6 +261,42 @@ static int clk_pll_set_rate(struct clk_h + return 0; + } + ++static int clk_pll_save_context(struct clk_hw *hw) ++{ ++ struct clk_pll *pll = to_clk_pll(hw); ++ struct clk_hw *parent_hw = clk_hw_get_parent(hw); ++ ++ pll->pms.parent_rate = clk_hw_get_rate(parent_hw); ++ pll->pms.rate = clk_pll_recalc_rate(&pll->hw, pll->pms.parent_rate); ++ pll->pms.status = clk_pll_ready(pll->regmap, PLL_REG(pll->id)); ++ ++ return 0; ++} ++ ++static void clk_pll_restore_context(struct clk_hw *hw) ++{ ++ struct clk_pll *pll = to_clk_pll(hw); ++ unsigned long calc_rate; ++ unsigned int pllr, pllr_out, pllr_count; ++ u8 out = 0; ++ ++ if (pll->characteristics->out) ++ out = pll->characteristics->out[pll->range]; ++ ++ regmap_read(pll->regmap, PLL_REG(pll->id), &pllr); ++ ++ calc_rate = (pll->pms.parent_rate / PLL_DIV(pllr)) * ++ (PLL_MUL(pllr, pll->layout) + 1); ++ pllr_count = (pllr >> PLL_COUNT_SHIFT) & PLL_MAX_COUNT; ++ pllr_out = (pllr >> PLL_OUT_SHIFT) & out; ++ ++ if (pll->pms.rate != calc_rate || ++ pll->pms.status != clk_pll_ready(pll->regmap, PLL_REG(pll->id)) || ++ pllr_count != PLL_MAX_COUNT || ++ (out && pllr_out != out)) ++ pr_warn("PLLAR was not configured properly by firmware\n"); ++} ++ + static const struct clk_ops pll_ops = { + .prepare = clk_pll_prepare, + .unprepare = clk_pll_unprepare, +@@ -267,6 +304,8 @@ static const struct clk_ops pll_ops = { + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, ++ .save_context = clk_pll_save_context, ++ .restore_context = clk_pll_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/clk-programmable.c ++++ b/drivers/clk/at91/clk-programmable.c +@@ -24,6 +24,7 @@ struct clk_programmable { + u32 *mux_table; + u8 id; + const struct clk_programmable_layout *layout; ++ struct at91_clk_pms pms; + }; + + #define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw) +@@ -177,12 +178,38 @@ static int clk_programmable_set_rate(str + return 0; + } + ++static int clk_programmable_save_context(struct clk_hw *hw) ++{ ++ struct clk_programmable *prog = to_clk_programmable(hw); ++ struct clk_hw *parent_hw = clk_hw_get_parent(hw); ++ ++ prog->pms.parent = clk_programmable_get_parent(hw); ++ prog->pms.parent_rate = clk_hw_get_rate(parent_hw); ++ prog->pms.rate = clk_programmable_recalc_rate(hw, prog->pms.parent_rate); ++ ++ return 0; ++} ++ ++static void clk_programmable_restore_context(struct clk_hw *hw) ++{ ++ struct clk_programmable *prog = to_clk_programmable(hw); ++ int ret; ++ ++ ret = clk_programmable_set_parent(hw, prog->pms.parent); ++ if (ret) ++ return; ++ ++ clk_programmable_set_rate(hw, prog->pms.rate, prog->pms.parent_rate); ++} ++ + static const struct clk_ops programmable_ops = { + .recalc_rate = clk_programmable_recalc_rate, + .determine_rate = clk_programmable_determine_rate, + .get_parent = clk_programmable_get_parent, + .set_parent = clk_programmable_set_parent, + .set_rate = clk_programmable_set_rate, ++ .save_context = clk_programmable_save_context, ++ .restore_context = clk_programmable_restore_context, + }; + + struct clk_hw * __init +@@ -221,8 +248,6 @@ at91_clk_register_programmable(struct re + if (ret) { + kfree(prog); + hw = ERR_PTR(ret); +- } else { +- pmc_register_pck(id); + } + + return hw; +--- a/drivers/clk/at91/clk-sam9x60-pll.c ++++ b/drivers/clk/at91/clk-sam9x60-pll.c +@@ -38,12 +38,14 @@ struct sam9x60_pll_core { + + struct sam9x60_frac { + struct sam9x60_pll_core core; ++ struct at91_clk_pms pms; + u32 frac; + u16 mul; + }; + + struct sam9x60_div { + struct sam9x60_pll_core core; ++ struct at91_clk_pms pms; + u8 div; + }; + +@@ -75,9 +77,8 @@ static unsigned long sam9x60_frac_pll_re + DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22)); + } + +-static int sam9x60_frac_pll_prepare(struct clk_hw *hw) ++static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core) + { +- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); + struct sam9x60_frac *frac = to_sam9x60_frac(core); + struct regmap *regmap = core->regmap; + unsigned int val, cfrac, cmul; +@@ -141,6 +142,13 @@ unlock: + return 0; + } + ++static int sam9x60_frac_pll_prepare(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ ++ return sam9x60_frac_pll_set(core); ++} ++ + static void sam9x60_frac_pll_unprepare(struct clk_hw *hw) + { + struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); +@@ -280,6 +288,25 @@ unlock: + return ret; + } + ++static int sam9x60_frac_pll_save_context(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ struct sam9x60_frac *frac = to_sam9x60_frac(core); ++ ++ frac->pms.status = sam9x60_pll_ready(core->regmap, core->id); ++ ++ return 0; ++} ++ ++static void sam9x60_frac_pll_restore_context(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ struct sam9x60_frac *frac = to_sam9x60_frac(core); ++ ++ if (frac->pms.status) ++ sam9x60_frac_pll_set(core); ++} ++ + static const struct clk_ops sam9x60_frac_pll_ops = { + .prepare = sam9x60_frac_pll_prepare, + .unprepare = sam9x60_frac_pll_unprepare, +@@ -287,6 +314,8 @@ static const struct clk_ops sam9x60_frac + .recalc_rate = sam9x60_frac_pll_recalc_rate, + .round_rate = sam9x60_frac_pll_round_rate, + .set_rate = sam9x60_frac_pll_set_rate, ++ .save_context = sam9x60_frac_pll_save_context, ++ .restore_context = sam9x60_frac_pll_restore_context, + }; + + static const struct clk_ops sam9x60_frac_pll_ops_chg = { +@@ -296,11 +325,12 @@ static const struct clk_ops sam9x60_frac + .recalc_rate = sam9x60_frac_pll_recalc_rate, + .round_rate = sam9x60_frac_pll_round_rate, + .set_rate = sam9x60_frac_pll_set_rate_chg, ++ .save_context = sam9x60_frac_pll_save_context, ++ .restore_context = sam9x60_frac_pll_restore_context, + }; + +-static int sam9x60_div_pll_prepare(struct clk_hw *hw) ++static int sam9x60_div_pll_set(struct sam9x60_pll_core *core) + { +- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); + struct sam9x60_div *div = to_sam9x60_div(core); + struct regmap *regmap = core->regmap; + unsigned long flags; +@@ -334,6 +364,13 @@ unlock: + return 0; + } + ++static int sam9x60_div_pll_prepare(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ ++ return sam9x60_div_pll_set(core); ++} ++ + static void sam9x60_div_pll_unprepare(struct clk_hw *hw) + { + struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); +@@ -482,6 +519,25 @@ unlock: + return 0; + } + ++static int sam9x60_div_pll_save_context(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ struct sam9x60_div *div = to_sam9x60_div(core); ++ ++ div->pms.status = sam9x60_div_pll_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void sam9x60_div_pll_restore_context(struct clk_hw *hw) ++{ ++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); ++ struct sam9x60_div *div = to_sam9x60_div(core); ++ ++ if (div->pms.status) ++ sam9x60_div_pll_set(core); ++} ++ + static const struct clk_ops sam9x60_div_pll_ops = { + .prepare = sam9x60_div_pll_prepare, + .unprepare = sam9x60_div_pll_unprepare, +@@ -489,6 +545,8 @@ static const struct clk_ops sam9x60_div_ + .recalc_rate = sam9x60_div_pll_recalc_rate, + .round_rate = sam9x60_div_pll_round_rate, + .set_rate = sam9x60_div_pll_set_rate, ++ .save_context = sam9x60_div_pll_save_context, ++ .restore_context = sam9x60_div_pll_restore_context, + }; + + static const struct clk_ops sam9x60_div_pll_ops_chg = { +@@ -498,6 +556,8 @@ static const struct clk_ops sam9x60_div_ + .recalc_rate = sam9x60_div_pll_recalc_rate, + .round_rate = sam9x60_div_pll_round_rate, + .set_rate = sam9x60_div_pll_set_rate_chg, ++ .save_context = sam9x60_div_pll_save_context, ++ .restore_context = sam9x60_div_pll_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/clk-system.c ++++ b/drivers/clk/at91/clk-system.c +@@ -20,6 +20,7 @@ + struct clk_system { + struct clk_hw hw; + struct regmap *regmap; ++ struct at91_clk_pms pms; + u8 id; + }; + +@@ -77,10 +78,29 @@ static int clk_system_is_prepared(struct + return !!(status & (1 << sys->id)); + } + ++static int clk_system_save_context(struct clk_hw *hw) ++{ ++ struct clk_system *sys = to_clk_system(hw); ++ ++ sys->pms.status = clk_system_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void clk_system_restore_context(struct clk_hw *hw) ++{ ++ struct clk_system *sys = to_clk_system(hw); ++ ++ if (sys->pms.status) ++ clk_system_prepare(&sys->hw); ++} ++ + static const struct clk_ops system_ops = { + .prepare = clk_system_prepare, + .unprepare = clk_system_unprepare, + .is_prepared = clk_system_is_prepared, ++ .save_context = clk_system_save_context, ++ .restore_context = clk_system_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/clk-usb.c ++++ b/drivers/clk/at91/clk-usb.c +@@ -24,6 +24,7 @@ + struct at91sam9x5_clk_usb { + struct clk_hw hw; + struct regmap *regmap; ++ struct at91_clk_pms pms; + u32 usbs_mask; + u8 num_parents; + }; +@@ -148,12 +149,38 @@ static int at91sam9x5_clk_usb_set_rate(s + return 0; + } + ++static int at91sam9x5_usb_save_context(struct clk_hw *hw) ++{ ++ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); ++ struct clk_hw *parent_hw = clk_hw_get_parent(hw); ++ ++ usb->pms.parent = at91sam9x5_clk_usb_get_parent(hw); ++ usb->pms.parent_rate = clk_hw_get_rate(parent_hw); ++ usb->pms.rate = at91sam9x5_clk_usb_recalc_rate(hw, usb->pms.parent_rate); ++ ++ return 0; ++} ++ ++static void at91sam9x5_usb_restore_context(struct clk_hw *hw) ++{ ++ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); ++ int ret; ++ ++ ret = at91sam9x5_clk_usb_set_parent(hw, usb->pms.parent); ++ if (ret) ++ return; ++ ++ at91sam9x5_clk_usb_set_rate(hw, usb->pms.rate, usb->pms.parent_rate); ++} ++ + static const struct clk_ops at91sam9x5_usb_ops = { + .recalc_rate = at91sam9x5_clk_usb_recalc_rate, + .determine_rate = at91sam9x5_clk_usb_determine_rate, + .get_parent = at91sam9x5_clk_usb_get_parent, + .set_parent = at91sam9x5_clk_usb_set_parent, + .set_rate = at91sam9x5_clk_usb_set_rate, ++ .save_context = at91sam9x5_usb_save_context, ++ .restore_context = at91sam9x5_usb_restore_context, + }; + + static int at91sam9n12_clk_usb_enable(struct clk_hw *hw) +--- a/drivers/clk/at91/clk-utmi.c ++++ b/drivers/clk/at91/clk-utmi.c +@@ -23,6 +23,7 @@ struct clk_utmi { + struct clk_hw hw; + struct regmap *regmap_pmc; + struct regmap *regmap_sfr; ++ struct at91_clk_pms pms; + }; + + #define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw) +@@ -113,11 +114,30 @@ static unsigned long clk_utmi_recalc_rat + return UTMI_RATE; + } + ++static int clk_utmi_save_context(struct clk_hw *hw) ++{ ++ struct clk_utmi *utmi = to_clk_utmi(hw); ++ ++ utmi->pms.status = clk_utmi_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void clk_utmi_restore_context(struct clk_hw *hw) ++{ ++ struct clk_utmi *utmi = to_clk_utmi(hw); ++ ++ if (utmi->pms.status) ++ clk_utmi_prepare(hw); ++} ++ + static const struct clk_ops utmi_ops = { + .prepare = clk_utmi_prepare, + .unprepare = clk_utmi_unprepare, + .is_prepared = clk_utmi_is_prepared, + .recalc_rate = clk_utmi_recalc_rate, ++ .save_context = clk_utmi_save_context, ++ .restore_context = clk_utmi_restore_context, + }; + + static struct clk_hw * __init +@@ -232,10 +252,29 @@ static int clk_utmi_sama7g5_is_prepared( + return 0; + } + ++static int clk_utmi_sama7g5_save_context(struct clk_hw *hw) ++{ ++ struct clk_utmi *utmi = to_clk_utmi(hw); ++ ++ utmi->pms.status = clk_utmi_sama7g5_is_prepared(hw); ++ ++ return 0; ++} ++ ++static void clk_utmi_sama7g5_restore_context(struct clk_hw *hw) ++{ ++ struct clk_utmi *utmi = to_clk_utmi(hw); ++ ++ if (utmi->pms.status) ++ clk_utmi_sama7g5_prepare(hw); ++} ++ + static const struct clk_ops sama7g5_utmi_ops = { + .prepare = clk_utmi_sama7g5_prepare, + .is_prepared = clk_utmi_sama7g5_is_prepared, + .recalc_rate = clk_utmi_recalc_rate, ++ .save_context = clk_utmi_sama7g5_save_context, ++ .restore_context = clk_utmi_sama7g5_restore_context, + }; + + struct clk_hw * __init +--- a/drivers/clk/at91/pmc.c ++++ b/drivers/clk/at91/pmc.c +@@ -3,6 +3,7 @@ + * Copyright (C) 2013 Boris BREZILLON + */ + ++#include + #include + #include + #include +@@ -14,8 +15,6 @@ + + #include + +-#include +- + #include "pmc.h" + + #define PMC_MAX_IDS 128 +@@ -111,147 +110,19 @@ struct pmc_data *pmc_data_allocate(unsig + } + + #ifdef CONFIG_PM +-static struct regmap *pmcreg; +- +-static u8 registered_ids[PMC_MAX_IDS]; +-static u8 registered_pcks[PMC_MAX_PCKS]; +- +-static struct +-{ +- u32 scsr; +- u32 pcsr0; +- u32 uckr; +- u32 mor; +- u32 mcfr; +- u32 pllar; +- u32 mckr; +- u32 usb; +- u32 imr; +- u32 pcsr1; +- u32 pcr[PMC_MAX_IDS]; +- u32 audio_pll0; +- u32 audio_pll1; +- u32 pckr[PMC_MAX_PCKS]; +-} pmc_cache; +- +-/* +- * As Peripheral ID 0 is invalid on AT91 chips, the identifier is stored +- * without alteration in the table, and 0 is for unused clocks. +- */ +-void pmc_register_id(u8 id) ++static int at91_pmc_suspend(void) + { +- int i; +- +- for (i = 0; i < PMC_MAX_IDS; i++) { +- if (registered_ids[i] == 0) { +- registered_ids[i] = id; +- break; +- } +- if (registered_ids[i] == id) +- break; +- } ++ return clk_save_context(); + } + +-/* +- * As Programmable Clock 0 is valid on AT91 chips, there is an offset +- * of 1 between the stored value and the real clock ID. +- */ +-void pmc_register_pck(u8 pck) ++static void at91_pmc_resume(void) + { +- int i; +- +- for (i = 0; i < PMC_MAX_PCKS; i++) { +- if (registered_pcks[i] == 0) { +- registered_pcks[i] = pck + 1; +- break; +- } +- if (registered_pcks[i] == (pck + 1)) +- break; +- } +-} +- +-static int pmc_suspend(void) +-{ +- int i; +- u8 num; +- +- regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr); +- regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0); +- regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr); +- regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor); +- regmap_read(pmcreg, AT91_CKGR_MCFR, &pmc_cache.mcfr); +- regmap_read(pmcreg, AT91_CKGR_PLLAR, &pmc_cache.pllar); +- regmap_read(pmcreg, AT91_PMC_MCKR, &pmc_cache.mckr); +- regmap_read(pmcreg, AT91_PMC_USB, &pmc_cache.usb); +- regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.imr); +- regmap_read(pmcreg, AT91_PMC_PCSR1, &pmc_cache.pcsr1); +- +- for (i = 0; registered_ids[i]; i++) { +- regmap_write(pmcreg, AT91_PMC_PCR, +- (registered_ids[i] & AT91_PMC_PCR_PID_MASK)); +- regmap_read(pmcreg, AT91_PMC_PCR, +- &pmc_cache.pcr[registered_ids[i]]); +- } +- for (i = 0; registered_pcks[i]; i++) { +- num = registered_pcks[i] - 1; +- regmap_read(pmcreg, AT91_PMC_PCKR(num), &pmc_cache.pckr[num]); +- } +- +- return 0; +-} +- +-static bool pmc_ready(unsigned int mask) +-{ +- unsigned int status; +- +- regmap_read(pmcreg, AT91_PMC_SR, &status); +- +- return ((status & mask) == mask) ? 1 : 0; +-} +- +-static void pmc_resume(void) +-{ +- int i; +- u8 num; +- u32 tmp; +- u32 mask = AT91_PMC_MCKRDY | AT91_PMC_LOCKA; +- +- regmap_read(pmcreg, AT91_PMC_MCKR, &tmp); +- if (pmc_cache.mckr != tmp) +- pr_warn("MCKR was not configured properly by the firmware\n"); +- regmap_read(pmcreg, AT91_CKGR_PLLAR, &tmp); +- if (pmc_cache.pllar != tmp) +- pr_warn("PLLAR was not configured properly by the firmware\n"); +- +- regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr); +- regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0); +- regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr); +- regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor); +- regmap_write(pmcreg, AT91_CKGR_MCFR, pmc_cache.mcfr); +- regmap_write(pmcreg, AT91_PMC_USB, pmc_cache.usb); +- regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.imr); +- regmap_write(pmcreg, AT91_PMC_PCER1, pmc_cache.pcsr1); +- +- for (i = 0; registered_ids[i]; i++) { +- regmap_write(pmcreg, AT91_PMC_PCR, +- pmc_cache.pcr[registered_ids[i]] | +- AT91_PMC_PCR_CMD); +- } +- for (i = 0; registered_pcks[i]; i++) { +- num = registered_pcks[i] - 1; +- regmap_write(pmcreg, AT91_PMC_PCKR(num), pmc_cache.pckr[num]); +- } +- +- if (pmc_cache.uckr & AT91_PMC_UPLLEN) +- mask |= AT91_PMC_LOCKU; +- +- while (!pmc_ready(mask)) +- cpu_relax(); ++ clk_restore_context(); + } + + static struct syscore_ops pmc_syscore_ops = { +- .suspend = pmc_suspend, +- .resume = pmc_resume, ++ .suspend = at91_pmc_suspend, ++ .resume = at91_pmc_resume, + }; + + static const struct of_device_id sama5d2_pmc_dt_ids[] = { +@@ -271,11 +142,7 @@ static int __init pmc_register_ops(void) + of_node_put(np); + return -ENODEV; + } +- +- pmcreg = device_node_to_regmap(np); + of_node_put(np); +- if (IS_ERR(pmcreg)) +- return PTR_ERR(pmcreg); + + register_syscore_ops(&pmc_syscore_ops); + +--- a/drivers/clk/at91/pmc.h ++++ b/drivers/clk/at91/pmc.h +@@ -13,6 +13,8 @@ + #include + #include + ++#include ++ + extern spinlock_t pmc_pcr_lock; + + struct pmc_data { +@@ -98,6 +100,20 @@ struct clk_pcr_layout { + u32 pid_mask; + }; + ++/** ++ * struct at91_clk_pms - Power management state for AT91 clock ++ * @rate: clock rate ++ * @parent_rate: clock parent rate ++ * @status: clock status (enabled or disabled) ++ * @parent: clock parent index ++ */ ++struct at91_clk_pms { ++ unsigned long rate; ++ unsigned long parent_rate; ++ unsigned int status; ++ unsigned int parent; ++}; ++ + #define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1)) + #define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask)) + +@@ -248,12 +264,4 @@ struct clk_hw * __init + at91_clk_sama7g5_register_utmi(struct regmap *regmap, const char *name, + const char *parent_name); + +-#ifdef CONFIG_PM +-void pmc_register_id(u8 id); +-void pmc_register_pck(u8 pck); +-#else +-static inline void pmc_register_id(u8 id) {} +-static inline void pmc_register_pck(u8 pck) {} +-#endif +- + #endif /* __PMC_H_ */ diff --git a/target/linux/at91/patches-5.15/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-5.15/101-ARM-at91-build-dtb-for-q5xr5.patch deleted file mode 100644 index 2bf8ca52ec..0000000000 --- a/target/linux/at91/patches-5.15/101-ARM-at91-build-dtb-for-q5xr5.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ - at91-kizboxmini-mb.dtb \ - at91-kizboxmini-rd.dtb \ - at91-smartkiz.dtb \ -+ at91-q5xr5.dtb \ - at91-wb45n.dtb \ - at91sam9g15ek.dtb \ - at91sam9g25-gardena-smart-gateway.dtb \ diff --git a/target/linux/at91/patches-5.15/101-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch b/target/linux/at91/patches-5.15/101-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch new file mode 100644 index 0000000000..19f1f6fdf2 --- /dev/null +++ b/target/linux/at91/patches-5.15/101-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch @@ -0,0 +1,89 @@ +From 63a0c32028148e91ea91cfbf95841c4ecd69d21b Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:06 +0300 +Subject: [PATCH 235/247] clk: at91: pmc: execute suspend/resume only for + backup mode + +Before going to backup mode architecture specific PM code sets the first +word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()). +Thus take this into account when suspending/resuming clocks. This will +avoid executing unnecessary instructions when suspending to non backup +modes. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-3-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/pmc.c | 39 +++++++++++++++++++++++++++++++++++++++ + 1 file changed, 39 insertions(+) + +--- a/drivers/clk/at91/pmc.c ++++ b/drivers/clk/at91/pmc.c +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -110,13 +111,35 @@ struct pmc_data *pmc_data_allocate(unsig + } + + #ifdef CONFIG_PM ++ ++/* Address in SECURAM that say if we suspend to backup mode. */ ++static void __iomem *at91_pmc_backup_suspend; ++ + static int at91_pmc_suspend(void) + { ++ unsigned int backup; ++ ++ if (!at91_pmc_backup_suspend) ++ return 0; ++ ++ backup = readl_relaxed(at91_pmc_backup_suspend); ++ if (!backup) ++ return 0; ++ + return clk_save_context(); + } + + static void at91_pmc_resume(void) + { ++ unsigned int backup; ++ ++ if (!at91_pmc_backup_suspend) ++ return; ++ ++ backup = readl_relaxed(at91_pmc_backup_suspend); ++ if (!backup) ++ return; ++ + clk_restore_context(); + } + +@@ -144,6 +167,22 @@ static int __init pmc_register_ops(void) + } + of_node_put(np); + ++ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); ++ if (!np) ++ return -ENODEV; ++ ++ if (!of_device_is_available(np)) { ++ of_node_put(np); ++ return -ENODEV; ++ } ++ of_node_put(np); ++ ++ at91_pmc_backup_suspend = of_iomap(np, 0); ++ if (!at91_pmc_backup_suspend) { ++ pr_warn("%s(): unable to map securam\n", __func__); ++ return -ENOMEM; ++ } ++ + register_syscore_ops(&pmc_syscore_ops); + + return 0; diff --git a/target/linux/at91/patches-5.15/102-clk-at91-clk-master-add-register-definition-for-sama.patch b/target/linux/at91/patches-5.15/102-clk-at91-clk-master-add-register-definition-for-sama.patch new file mode 100644 index 0000000000..726d9b33e4 --- /dev/null +++ b/target/linux/at91/patches-5.15/102-clk-at91-clk-master-add-register-definition-for-sama.patch @@ -0,0 +1,124 @@ +From c716562753d1e51a1c53647aa77a332f97187d15 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:08 +0300 +Subject: [PATCH 237/247] clk: at91: clk-master: add register definition for + sama7g5's master clock + +SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the +register at offset 0x30 (relative to PMC). In the last/first phase of +suspend/resume procedure (which is architecture specific) the parent +of master clocks are changed (via assembly code) for more power saving +(see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable +and at91_mckx_ps_restore). Thus the macros corresponding to register +at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S. +commit ec03f18cc222 ("clk: at91: add register definition for sama7g5's +master clock") introduced the proper macros but didn't adapted the +clk-master.c as well. Thus, this commit adapt the clk-master.c to use +the macros introduced in commit ec03f18cc222 ("clk: at91: add register +definition for sama7g5's master clock"). + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-5-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/clk-master.c | 50 ++++++++++++++++------------------- + 1 file changed, 23 insertions(+), 27 deletions(-) + +--- a/drivers/clk/at91/clk-master.c ++++ b/drivers/clk/at91/clk-master.c +@@ -17,15 +17,7 @@ + #define MASTER_DIV_SHIFT 8 + #define MASTER_DIV_MASK 0x7 + +-#define PMC_MCR 0x30 +-#define PMC_MCR_ID_MSK GENMASK(3, 0) +-#define PMC_MCR_CMD BIT(7) +-#define PMC_MCR_DIV GENMASK(10, 8) +-#define PMC_MCR_CSS GENMASK(20, 16) + #define PMC_MCR_CSS_SHIFT (16) +-#define PMC_MCR_EN BIT(28) +- +-#define PMC_MCR_ID(x) ((x) & PMC_MCR_ID_MSK) + + #define MASTER_MAX_ID 4 + +@@ -687,20 +679,22 @@ static void clk_sama7g5_master_set(struc + { + unsigned long flags; + unsigned int val, cparent; +- unsigned int enable = status ? PMC_MCR_EN : 0; ++ unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0; + + spin_lock_irqsave(master->lock, flags); + +- regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id)); +- regmap_read(master->regmap, PMC_MCR, &val); +- regmap_update_bits(master->regmap, PMC_MCR, +- enable | PMC_MCR_CSS | PMC_MCR_DIV | +- PMC_MCR_CMD | PMC_MCR_ID_MSK, ++ regmap_write(master->regmap, AT91_PMC_MCR_V2, ++ AT91_PMC_MCR_V2_ID(master->id)); ++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); ++ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, ++ enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV | ++ AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK, + enable | (master->parent << PMC_MCR_CSS_SHIFT) | + (master->div << MASTER_DIV_SHIFT) | +- PMC_MCR_CMD | PMC_MCR_ID(master->id)); ++ AT91_PMC_MCR_V2_CMD | ++ AT91_PMC_MCR_V2_ID(master->id)); + +- cparent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT; ++ cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; + + /* Wait here only if parent is being changed. */ + while ((cparent != master->parent) && !clk_master_ready(master)) +@@ -725,10 +719,12 @@ static void clk_sama7g5_master_disable(s + + spin_lock_irqsave(master->lock, flags); + +- regmap_write(master->regmap, PMC_MCR, master->id); +- regmap_update_bits(master->regmap, PMC_MCR, +- PMC_MCR_EN | PMC_MCR_CMD | PMC_MCR_ID_MSK, +- PMC_MCR_CMD | PMC_MCR_ID(master->id)); ++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); ++ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, ++ AT91_PMC_MCR_V2_EN | AT91_PMC_MCR_V2_CMD | ++ AT91_PMC_MCR_V2_ID_MSK, ++ AT91_PMC_MCR_V2_CMD | ++ AT91_PMC_MCR_V2_ID(master->id)); + + spin_unlock_irqrestore(master->lock, flags); + } +@@ -741,12 +737,12 @@ static int clk_sama7g5_master_is_enabled + + spin_lock_irqsave(master->lock, flags); + +- regmap_write(master->regmap, PMC_MCR, master->id); +- regmap_read(master->regmap, PMC_MCR, &val); ++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); ++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); + + spin_unlock_irqrestore(master->lock, flags); + +- return !!(val & PMC_MCR_EN); ++ return !!(val & AT91_PMC_MCR_V2_EN); + } + + static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate, +@@ -842,10 +838,10 @@ at91_clk_sama7g5_register_master(struct + master->mux_table = mux_table; + + spin_lock_irqsave(master->lock, flags); +- regmap_write(master->regmap, PMC_MCR, master->id); +- regmap_read(master->regmap, PMC_MCR, &val); +- master->parent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT; +- master->div = (val & PMC_MCR_DIV) >> MASTER_DIV_SHIFT; ++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); ++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); ++ master->parent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; ++ master->div = (val & AT91_PMC_MCR_V2_DIV) >> MASTER_DIV_SHIFT; + spin_unlock_irqrestore(master->lock, flags); + + hw = &master->hw; diff --git a/target/linux/at91/patches-5.15/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch b/target/linux/at91/patches-5.15/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch deleted file mode 100644 index e684e5d4db..0000000000 --- a/target/linux/at91/patches-5.15/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 44bb7c72cdd830f54fe18e730205f892d9cbfe39 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 19 Nov 2020 17:43:08 +0200 -Subject: [PATCH 102/247] dt-bindings: clock: at91: add sama7g5 pll defines - -Add SAMA7G5 specific PLL defines to be referenced in a phandle as a -PMC_TYPE_CORE clock. - -Suggested-by: Claudiu Beznea -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 6 +++--- - include/dt-bindings/clock/at91.h | 10 ++++++++++ - 2 files changed, 13 insertions(+), 3 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -182,13 +182,13 @@ static const struct { - .p = "audiopll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .eid = PMC_I2S0_MUX, }, -+ .eid = PMC_AUDIOPMCPLL, }, - - { .n = "audiopll_diviock", - .p = "audiopll_fracck", - .l = &pll_layout_divio, - .t = PLL_TYPE_DIV, -- .eid = PMC_I2S1_MUX, }, -+ .eid = PMC_AUDIOIOPLL, }, - }, - - [PLL_ID_ETH] = { -@@ -835,7 +835,7 @@ static void __init sama7g5_pmc_setup(str - if (IS_ERR(regmap)) - return; - -- sama7g5_pmc = pmc_data_allocate(PMC_I2S1_MUX + 1, -+ sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1, - nck(sama7g5_systemck), - nck(sama7g5_periphck), - nck(sama7g5_gck), 8); ---- a/include/dt-bindings/clock/at91.h -+++ b/include/dt-bindings/clock/at91.h -@@ -25,6 +25,16 @@ - #define PMC_PLLBCK 8 - #define PMC_AUDIOPLLCK 9 - -+/* SAMA7G5 */ -+#define PMC_CPUPLL (PMC_MAIN + 1) -+#define PMC_SYSPLL (PMC_MAIN + 2) -+#define PMC_DDRPLL (PMC_MAIN + 3) -+#define PMC_IMGPLL (PMC_MAIN + 4) -+#define PMC_BAUDPLL (PMC_MAIN + 5) -+#define PMC_AUDIOPMCPLL (PMC_MAIN + 6) -+#define PMC_AUDIOIOPLL (PMC_MAIN + 7) -+#define PMC_ETHPLL (PMC_MAIN + 8) -+ - #ifndef AT91_PMC_MOSCS - #define AT91_PMC_MOSCS 0 /* MOSCS Flag */ - #define AT91_PMC_LOCKA 1 /* PLLA Lock */ diff --git a/target/linux/at91/patches-5.15/103-clk-at91-clk-master-improve-readability-by-using-loc.patch b/target/linux/at91/patches-5.15/103-clk-at91-clk-master-improve-readability-by-using-loc.patch new file mode 100644 index 0000000000..a5b57a67ad --- /dev/null +++ b/target/linux/at91/patches-5.15/103-clk-at91-clk-master-improve-readability-by-using-loc.patch @@ -0,0 +1,40 @@ +From 17b53ad1574cb5f41789993289d3d94f7a50f0ce Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:09 +0300 +Subject: [PATCH 238/247] clk: at91: clk-master: improve readability by using + local variables + +Improve readability in clk_sama7g5_master_set() by using local +variables. + +Suggested-by: Nicolas Ferre +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-6-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/clk-master.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/clk/at91/clk-master.c ++++ b/drivers/clk/at91/clk-master.c +@@ -680,6 +680,8 @@ static void clk_sama7g5_master_set(struc + unsigned long flags; + unsigned int val, cparent; + unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0; ++ unsigned int parent = master->parent << PMC_MCR_CSS_SHIFT; ++ unsigned int div = master->div << MASTER_DIV_SHIFT; + + spin_lock_irqsave(master->lock, flags); + +@@ -689,9 +691,7 @@ static void clk_sama7g5_master_set(struc + regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, + enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV | + AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK, +- enable | (master->parent << PMC_MCR_CSS_SHIFT) | +- (master->div << MASTER_DIV_SHIFT) | +- AT91_PMC_MCR_V2_CMD | ++ enable | parent | div | AT91_PMC_MCR_V2_CMD | + AT91_PMC_MCR_V2_ID(master->id)); + + cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; diff --git a/target/linux/at91/patches-5.15/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch b/target/linux/at91/patches-5.15/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch deleted file mode 100644 index cd50dee6e1..0000000000 --- a/target/linux/at91/patches-5.15/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 55c14526f970805a6bf2ed4b820f062334375abe Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 19 Nov 2020 17:43:09 +0200 -Subject: [PATCH 103/247] clk: at91: sama7g5: allow SYS and CPU PLLs to be - exported and referenced in DT - -Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock -from phandle in DT. - -Suggested-by: Claudiu Beznea -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -117,7 +117,8 @@ static const struct { - .p = "cpupll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .c = 1, }, -+ .c = 1, -+ .eid = PMC_CPUPLL, }, - }, - - [PLL_ID_SYS] = { -@@ -131,7 +132,8 @@ static const struct { - .p = "syspll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .c = 1, }, -+ .c = 1, -+ .eid = PMC_SYSPLL, }, - }, - - [PLL_ID_DDR] = { diff --git a/target/linux/at91/patches-5.15/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch b/target/linux/at91/patches-5.15/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch deleted file mode 100644 index 9feea82490..0000000000 --- a/target/linux/at91/patches-5.15/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch +++ /dev/null @@ -1,42 +0,0 @@ -From b2349278894bb381fa26a8717d3093d53f08fd36 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 19 Nov 2020 17:43:10 +0200 -Subject: [PATCH 104/247] clk: at91: clk-master: add 5th divisor for mck master - -clk-master can have 5 divisors with a field width of 3 bits -on some products. - -Change the mask and number of divisors accordingly. - -Reported-by: Mihai Sain -Signed-off-by: Eugen Hristev -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 2 +- - drivers/clk/at91/pmc.h | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -15,7 +15,7 @@ - #define MASTER_PRES_MASK 0x7 - #define MASTER_PRES_MAX MASTER_PRES_MASK - #define MASTER_DIV_SHIFT 8 --#define MASTER_DIV_MASK 0x3 -+#define MASTER_DIV_MASK 0x7 - - #define PMC_MCR 0x30 - #define PMC_MCR_ID_MSK GENMASK(3, 0) ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -48,7 +48,7 @@ extern const struct clk_master_layout at - - struct clk_master_characteristics { - struct clk_range output; -- u32 divisors[4]; -+ u32 divisors[5]; - u8 have_div3_pres; - }; - diff --git a/target/linux/at91/patches-5.15/104-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch b/target/linux/at91/patches-5.15/104-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch new file mode 100644 index 0000000000..2918de1700 --- /dev/null +++ b/target/linux/at91/patches-5.15/104-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch @@ -0,0 +1,39 @@ +From 8a38e0dda46c9d941a61d8b2e6c14704531b7871 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:10 +0300 +Subject: [PATCH 239/247] clk: at91: pmc: add sama7g5 to the list of available + pmcs + +Add SAMA7G5 to the list of available PMCs such that the suspend/resume +code for clocks to be used on backup mode. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-7-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/pmc.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/at91/pmc.c ++++ b/drivers/clk/at91/pmc.c +@@ -148,8 +148,9 @@ static struct syscore_ops pmc_syscore_op + .resume = at91_pmc_resume, + }; + +-static const struct of_device_id sama5d2_pmc_dt_ids[] = { ++static const struct of_device_id pmc_dt_ids[] = { + { .compatible = "atmel,sama5d2-pmc" }, ++ { .compatible = "microchip,sama7g5-pmc", }, + { /* sentinel */ } + }; + +@@ -157,7 +158,7 @@ static int __init pmc_register_ops(void) + { + struct device_node *np; + +- np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids); ++ np = of_find_matching_node(NULL, pmc_dt_ids); + if (!np) + return -ENODEV; + diff --git a/target/linux/at91/patches-5.15/105-clk-at91-clk-master-mask-mckr-against-layout-mask.patch b/target/linux/at91/patches-5.15/105-clk-at91-clk-master-mask-mckr-against-layout-mask.patch new file mode 100644 index 0000000000..ea869c9485 --- /dev/null +++ b/target/linux/at91/patches-5.15/105-clk-at91-clk-master-mask-mckr-against-layout-mask.patch @@ -0,0 +1,46 @@ +From 27c11c09346b7b9f67eeb39db1b943f4a9742ff3 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:13 +0300 +Subject: [PATCH 241/247] clk: at91: clk-master: mask mckr against layout->mask + +Mask values read/written from/to MCKR against layout->mask as this +mask may be different b/w PMC versions. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-10-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/clk-master.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +--- a/drivers/clk/at91/clk-master.c ++++ b/drivers/clk/at91/clk-master.c +@@ -186,8 +186,8 @@ static int clk_master_div_set_rate(struc + if (ret) + goto unlock; + +- tmp = mckr & master->layout->mask; +- tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ mckr &= master->layout->mask; ++ tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; + if (tmp == div) + goto unlock; + +@@ -384,6 +384,7 @@ static unsigned long clk_master_pres_rec + regmap_read(master->regmap, master->layout->offset, &val); + spin_unlock_irqrestore(master->lock, flags); + ++ val &= master->layout->mask; + pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; + if (pres == MASTER_PRES_MAX && characteristics->have_div3_pres) + pres = 3; +@@ -403,6 +404,8 @@ static u8 clk_master_pres_get_parent(str + regmap_read(master->regmap, master->layout->offset, &mckr); + spin_unlock_irqrestore(master->lock, flags); + ++ mckr &= master->layout->mask; ++ + return mckr & AT91_PMC_CSS; + } + diff --git a/target/linux/at91/patches-5.15/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch b/target/linux/at91/patches-5.15/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch deleted file mode 100644 index 55e7f913c2..0000000000 --- a/target/linux/at91/patches-5.15/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch +++ /dev/null @@ -1,36 +0,0 @@ -From c41f013e13962dcc78239d5e4834214d44556cfb Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 19 Nov 2020 17:43:11 +0200 -Subject: [PATCH 105/247] clk: at91: sama7g5: add 5th divisor for mck0 layout - and characteristics - -This SoC has the 5th divisor for the mck0 master clock. -Adapt the characteristics accordingly. - -Reported-by: Mihai Sain -Signed-off-by: Eugen Hristev -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -775,13 +775,13 @@ static const struct clk_pll_characterist - /* MCK0 characteristics. */ - static const struct clk_master_characteristics mck0_characteristics = { - .output = { .min = 140000000, .max = 200000000 }, -- .divisors = { 1, 2, 4, 3 }, -+ .divisors = { 1, 2, 4, 3, 5 }, - .have_div3_pres = 1, - }; - - /* MCK0 layout. */ - static const struct clk_master_layout mck0_layout = { -- .mask = 0x373, -+ .mask = 0x773, - .pres_shift = 4, - .offset = 0x28, - }; diff --git a/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch b/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch new file mode 100644 index 0000000000..e5ebdc4ea4 --- /dev/null +++ b/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch @@ -0,0 +1,312 @@ +From e76d2af5009f52aa02d3db7ae32d150ad66398f9 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:15 +0300 +Subject: [PATCH 243/247] clk: at91: clk-sam9x60-pll: add notifier for div part + of PLL + +SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: +one fractional part and one divider. On SAMA7G5 the CPU PLL could be +changed at run-time to implement DVFS. The hardware clock tree on +SAMA7G5 for CPU PLL is as follows: + + +---- div1 ----------------> cpuck + | +FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 + +The div1 block is not implemented in Linux; on prescaler block it has +been discovered a bug on some scenarios and will be removed from Linux +in next commits. Thus, the final clock tree that will be used in Linux +will be as follows: + + +-----------> cpuck + | +FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 + +It has been proposed in [1] to not introduce a new CPUFreq driver but +to overload the proper clock drivers with proper operation such that +cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement +clock notifiers which applies safe dividers before FRAC PLL is changed. +The current commit treats only the DIV PLL by adding a notifier that +sets a safe divider on PRE_RATE_CHANGE events. The safe divider is +provided by initialization clock code (sama7g5.c). The div0 is treated +in next commits (to keep the changes as clean as possible). + +[1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/ + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/clk-sam9x60-pll.c | 102 ++++++++++++++++++++++------- + drivers/clk/at91/pmc.h | 3 +- + drivers/clk/at91/sam9x60.c | 6 +- + drivers/clk/at91/sama7g5.c | 13 +++- + 4 files changed, 95 insertions(+), 29 deletions(-) + +--- a/drivers/clk/at91/clk-sam9x60-pll.c ++++ b/drivers/clk/at91/clk-sam9x60-pll.c +@@ -5,6 +5,7 @@ + */ + + #include ++#include + #include + #include + #include +@@ -47,12 +48,15 @@ struct sam9x60_div { + struct sam9x60_pll_core core; + struct at91_clk_pms pms; + u8 div; ++ u8 safe_div; + }; + + #define to_sam9x60_pll_core(hw) container_of(hw, struct sam9x60_pll_core, hw) + #define to_sam9x60_frac(core) container_of(core, struct sam9x60_frac, core) + #define to_sam9x60_div(core) container_of(core, struct sam9x60_div, core) + ++static struct sam9x60_div *notifier_div; ++ + static inline bool sam9x60_pll_ready(struct regmap *regmap, int id) + { + unsigned int status; +@@ -329,6 +333,26 @@ static const struct clk_ops sam9x60_frac + .restore_context = sam9x60_frac_pll_restore_context, + }; + ++/* This function should be called with spinlock acquired. */ ++static void sam9x60_div_pll_set_div(struct sam9x60_pll_core *core, u32 div, ++ bool enable) ++{ ++ struct regmap *regmap = core->regmap; ++ u32 ena_msk = enable ? core->layout->endiv_mask : 0; ++ u32 ena_val = enable ? (1 << core->layout->endiv_shift) : 0; ++ ++ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, ++ core->layout->div_mask | ena_msk, ++ (div << core->layout->div_shift) | ena_val); ++ ++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, ++ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, ++ AT91_PMC_PLL_UPDT_UPDATE | core->id); ++ ++ while (!sam9x60_pll_ready(regmap, core->id)) ++ cpu_relax(); ++} ++ + static int sam9x60_div_pll_set(struct sam9x60_pll_core *core) + { + struct sam9x60_div *div = to_sam9x60_div(core); +@@ -346,17 +370,7 @@ static int sam9x60_div_pll_set(struct sa + if (!!(val & core->layout->endiv_mask) && cdiv == div->div) + goto unlock; + +- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, +- core->layout->div_mask | core->layout->endiv_mask, +- (div->div << core->layout->div_shift) | +- (1 << core->layout->endiv_shift)); +- +- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, +- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, +- AT91_PMC_PLL_UPDT_UPDATE | core->id); +- +- while (!sam9x60_pll_ready(regmap, core->id)) +- cpu_relax(); ++ sam9x60_div_pll_set_div(core, div->div, 1); + + unlock: + spin_unlock_irqrestore(core->lock, flags); +@@ -502,16 +516,7 @@ static int sam9x60_div_pll_set_rate_chg( + if (cdiv == div->div) + goto unlock; + +- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, +- core->layout->div_mask, +- (div->div << core->layout->div_shift)); +- +- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, +- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, +- AT91_PMC_PLL_UPDT_UPDATE | core->id); +- +- while (!sam9x60_pll_ready(regmap, core->id)) +- cpu_relax(); ++ sam9x60_div_pll_set_div(core, div->div, 0); + + unlock: + spin_unlock_irqrestore(core->lock, irqflags); +@@ -538,6 +543,48 @@ static void sam9x60_div_pll_restore_cont + sam9x60_div_pll_set(core); + } + ++static int sam9x60_div_pll_notifier_fn(struct notifier_block *notifier, ++ unsigned long code, void *data) ++{ ++ struct sam9x60_div *div = notifier_div; ++ struct sam9x60_pll_core core = div->core; ++ struct regmap *regmap = core.regmap; ++ unsigned long irqflags; ++ u32 val, cdiv; ++ int ret = NOTIFY_DONE; ++ ++ if (code != PRE_RATE_CHANGE) ++ return ret; ++ ++ /* ++ * We switch to safe divider to avoid overclocking of other domains ++ * feed by us while the frac PLL (our parent) is changed. ++ */ ++ div->div = div->safe_div; ++ ++ spin_lock_irqsave(core.lock, irqflags); ++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, ++ core.id); ++ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val); ++ cdiv = (val & core.layout->div_mask) >> core.layout->div_shift; ++ ++ /* Stop if nothing changed. */ ++ if (cdiv == div->safe_div) ++ goto unlock; ++ ++ sam9x60_div_pll_set_div(&core, div->div, 0); ++ ret = NOTIFY_OK; ++ ++unlock: ++ spin_unlock_irqrestore(core.lock, irqflags); ++ ++ return ret; ++} ++ ++static struct notifier_block sam9x60_div_pll_notifier = { ++ .notifier_call = sam9x60_div_pll_notifier_fn, ++}; ++ + static const struct clk_ops sam9x60_div_pll_ops = { + .prepare = sam9x60_div_pll_prepare, + .unprepare = sam9x60_div_pll_unprepare, +@@ -647,7 +694,8 @@ struct clk_hw * __init + sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, + const char *name, const char *parent_name, u8 id, + const struct clk_pll_characteristics *characteristics, +- const struct clk_pll_layout *layout, u32 flags) ++ const struct clk_pll_layout *layout, u32 flags, ++ u32 safe_div) + { + struct sam9x60_div *div; + struct clk_hw *hw; +@@ -656,9 +704,13 @@ sam9x60_clk_register_div_pll(struct regm + unsigned int val; + int ret; + +- if (id > PLL_MAX_ID || !lock) ++ /* We only support one changeable PLL. */ ++ if (id > PLL_MAX_ID || !lock || (safe_div && notifier_div)) + return ERR_PTR(-EINVAL); + ++ if (safe_div >= PLL_DIV_MAX) ++ safe_div = PLL_DIV_MAX - 1; ++ + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); +@@ -678,6 +730,7 @@ sam9x60_clk_register_div_pll(struct regm + div->core.layout = layout; + div->core.regmap = regmap; + div->core.lock = lock; ++ div->safe_div = safe_div; + + spin_lock_irqsave(div->core.lock, irqflags); + +@@ -693,6 +746,9 @@ sam9x60_clk_register_div_pll(struct regm + if (ret) { + kfree(div); + hw = ERR_PTR(ret); ++ } else if (div->safe_div) { ++ notifier_div = div; ++ clk_notifier_register(hw->clk, &sam9x60_div_pll_notifier); + } + + return hw; +--- a/drivers/clk/at91/pmc.h ++++ b/drivers/clk/at91/pmc.h +@@ -214,7 +214,8 @@ struct clk_hw * __init + sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, + const char *name, const char *parent_name, u8 id, + const struct clk_pll_characteristics *characteristics, +- const struct clk_pll_layout *layout, u32 flags); ++ const struct clk_pll_layout *layout, u32 flags, ++ u32 safe_div); + + struct clk_hw * __init + sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock, +--- a/drivers/clk/at91/sam9x60.c ++++ b/drivers/clk/at91/sam9x60.c +@@ -242,7 +242,7 @@ static void __init sam9x60_pmc_setup(str + * This feeds CPU. It should not + * be disabled. + */ +- CLK_IS_CRITICAL | CLK_SET_RATE_GATE); ++ CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +@@ -260,7 +260,7 @@ static void __init sam9x60_pmc_setup(str + &pll_div_layout, + CLK_SET_RATE_GATE | + CLK_SET_PARENT_GATE | +- CLK_SET_RATE_PARENT); ++ CLK_SET_RATE_PARENT, 0); + if (IS_ERR(hw)) + goto err_free; + +@@ -279,7 +279,7 @@ static void __init sam9x60_pmc_setup(str + hw = at91_clk_register_master_div(regmap, "masterck_div", + "masterck_pres", &sam9x60_master_layout, + &mck_characteristics, &mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/sama7g5.c ++++ b/drivers/clk/at91/sama7g5.c +@@ -127,6 +127,8 @@ static const struct clk_pll_characterist + * @t: clock type + * @f: clock flags + * @eid: export index in sama7g5->chws[] array ++ * @safe_div: intermediate divider need to be set on PRE_RATE_CHANGE ++ * notification + */ + static const struct { + const char *n; +@@ -136,6 +138,7 @@ static const struct { + unsigned long f; + u8 t; + u8 eid; ++ u8 safe_div; + } sama7g5_plls[][PLL_ID_MAX] = { + [PLL_ID_CPU] = { + { .n = "cpupll_fracck", +@@ -156,7 +159,12 @@ static const struct { + .t = PLL_TYPE_DIV, + /* This feeds CPU. It should not be disabled. */ + .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, +- .eid = PMC_CPUPLL, }, ++ .eid = PMC_CPUPLL, ++ /* ++ * Safe div=15 should be safe even for switching b/w 1GHz and ++ * 90MHz (frac pll might go up to 1.2GHz). ++ */ ++ .safe_div = 15, }, + }, + + [PLL_ID_SYS] = { +@@ -966,7 +974,8 @@ static void __init sama7g5_pmc_setup(str + sama7g5_plls[i][j].p, i, + sama7g5_plls[i][j].c, + sama7g5_plls[i][j].l, +- sama7g5_plls[i][j].f); ++ sama7g5_plls[i][j].f, ++ sama7g5_plls[i][j].safe_div); + break; + + default: diff --git a/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch b/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch deleted file mode 100644 index fa76cbb5a3..0000000000 --- a/target/linux/at91/patches-5.15/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch +++ /dev/null @@ -1,510 +0,0 @@ -From 6fe2927863de96edf35d8357712dbf83a489f556 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:12 +0200 -Subject: [PATCH 106/247] clk: at91: clk-sam9x60-pll: allow runtime changes for - pll - -Allow runtime frequency changes for PLLs registered with proper flags. -This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-sam9x60-pll.c | 145 +++++++++++++++++++++++++---- - drivers/clk/at91/pmc.h | 4 +- - drivers/clk/at91/sam9x60.c | 22 ++++- - drivers/clk/at91/sama7g5.c | 67 +++++++++---- - 4 files changed, 197 insertions(+), 41 deletions(-) - ---- a/drivers/clk/at91/clk-sam9x60-pll.c -+++ b/drivers/clk/at91/clk-sam9x60-pll.c -@@ -229,6 +229,57 @@ static int sam9x60_frac_pll_set_rate(str - return sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true); - } - -+static int sam9x60_frac_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_frac *frac = to_sam9x60_frac(core); -+ struct regmap *regmap = core->regmap; -+ unsigned long irqflags; -+ unsigned int val, cfrac, cmul; -+ long ret; -+ -+ ret = sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true); -+ if (ret <= 0) -+ return ret; -+ -+ spin_lock_irqsave(core->lock, irqflags); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, -+ core->id); -+ regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val); -+ cmul = (val & core->layout->mul_mask) >> core->layout->mul_shift; -+ cfrac = (val & core->layout->frac_mask) >> core->layout->frac_shift; -+ -+ if (cmul == frac->mul && cfrac == frac->frac) -+ goto unlock; -+ -+ regmap_write(regmap, AT91_PMC_PLL_CTRL1, -+ (frac->mul << core->layout->mul_shift) | -+ (frac->frac << core->layout->frac_shift)); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -+ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -+ AT91_PMC_PLL_UPDT_UPDATE | core->id); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, -+ AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL, -+ AT91_PMC_PLL_CTRL0_ENLOCK | -+ AT91_PMC_PLL_CTRL0_ENPLL); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -+ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -+ AT91_PMC_PLL_UPDT_UPDATE | core->id); -+ -+ while (!sam9x60_pll_ready(regmap, core->id)) -+ cpu_relax(); -+ -+unlock: -+ spin_unlock_irqrestore(core->lock, irqflags); -+ -+ return ret; -+} -+ - static const struct clk_ops sam9x60_frac_pll_ops = { - .prepare = sam9x60_frac_pll_prepare, - .unprepare = sam9x60_frac_pll_unprepare, -@@ -238,6 +289,15 @@ static const struct clk_ops sam9x60_frac - .set_rate = sam9x60_frac_pll_set_rate, - }; - -+static const struct clk_ops sam9x60_frac_pll_ops_chg = { -+ .prepare = sam9x60_frac_pll_prepare, -+ .unprepare = sam9x60_frac_pll_unprepare, -+ .is_prepared = sam9x60_frac_pll_is_prepared, -+ .recalc_rate = sam9x60_frac_pll_recalc_rate, -+ .round_rate = sam9x60_frac_pll_round_rate, -+ .set_rate = sam9x60_frac_pll_set_rate_chg, -+}; -+ - static int sam9x60_div_pll_prepare(struct clk_hw *hw) - { - struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -@@ -384,6 +444,44 @@ static int sam9x60_div_pll_set_rate(stru - return 0; - } - -+static int sam9x60_div_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_div *div = to_sam9x60_div(core); -+ struct regmap *regmap = core->regmap; -+ unsigned long irqflags; -+ unsigned int val, cdiv; -+ -+ div->div = DIV_ROUND_CLOSEST(parent_rate, rate) - 1; -+ -+ spin_lock_irqsave(core->lock, irqflags); -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, -+ core->id); -+ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val); -+ cdiv = (val & core->layout->div_mask) >> core->layout->div_shift; -+ -+ /* Stop if nothing changed. */ -+ if (cdiv == div->div) -+ goto unlock; -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, -+ core->layout->div_mask, -+ (div->div << core->layout->div_shift)); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -+ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -+ AT91_PMC_PLL_UPDT_UPDATE | core->id); -+ -+ while (!sam9x60_pll_ready(regmap, core->id)) -+ cpu_relax(); -+ -+unlock: -+ spin_unlock_irqrestore(core->lock, irqflags); -+ -+ return 0; -+} -+ - static const struct clk_ops sam9x60_div_pll_ops = { - .prepare = sam9x60_div_pll_prepare, - .unprepare = sam9x60_div_pll_unprepare, -@@ -393,17 +491,26 @@ static const struct clk_ops sam9x60_div_ - .set_rate = sam9x60_div_pll_set_rate, - }; - -+static const struct clk_ops sam9x60_div_pll_ops_chg = { -+ .prepare = sam9x60_div_pll_prepare, -+ .unprepare = sam9x60_div_pll_unprepare, -+ .is_prepared = sam9x60_div_pll_is_prepared, -+ .recalc_rate = sam9x60_div_pll_recalc_rate, -+ .round_rate = sam9x60_div_pll_round_rate, -+ .set_rate = sam9x60_div_pll_set_rate_chg, -+}; -+ - struct clk_hw * __init - sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, - struct clk_hw *parent_hw, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, bool critical) -+ const struct clk_pll_layout *layout, u32 flags) - { - struct sam9x60_frac *frac; - struct clk_hw *hw; - struct clk_init_data init; -- unsigned long parent_rate, flags; -+ unsigned long parent_rate, irqflags; - unsigned int val; - int ret; - -@@ -417,10 +524,12 @@ sam9x60_clk_register_frac_pll(struct reg - init.name = name; - init.parent_names = &parent_name; - init.num_parents = 1; -- init.ops = &sam9x60_frac_pll_ops; -- init.flags = CLK_SET_RATE_GATE; -- if (critical) -- init.flags |= CLK_IS_CRITICAL; -+ if (flags & CLK_SET_RATE_GATE) -+ init.ops = &sam9x60_frac_pll_ops; -+ else -+ init.ops = &sam9x60_frac_pll_ops_chg; -+ -+ init.flags = flags; - - frac->core.id = id; - frac->core.hw.init = &init; -@@ -429,7 +538,7 @@ sam9x60_clk_register_frac_pll(struct reg - frac->core.regmap = regmap; - frac->core.lock = lock; - -- spin_lock_irqsave(frac->core.lock, flags); -+ spin_lock_irqsave(frac->core.lock, irqflags); - if (sam9x60_pll_ready(regmap, id)) { - regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, - AT91_PMC_PLL_UPDT_ID_MSK, id); -@@ -457,7 +566,7 @@ sam9x60_clk_register_frac_pll(struct reg - goto free; - } - } -- spin_unlock_irqrestore(frac->core.lock, flags); -+ spin_unlock_irqrestore(frac->core.lock, irqflags); - - hw = &frac->core.hw; - ret = clk_hw_register(NULL, hw); -@@ -469,7 +578,7 @@ sam9x60_clk_register_frac_pll(struct reg - return hw; - - free: -- spin_unlock_irqrestore(frac->core.lock, flags); -+ spin_unlock_irqrestore(frac->core.lock, irqflags); - kfree(frac); - return hw; - } -@@ -478,12 +587,12 @@ struct clk_hw * __init - sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, bool critical) -+ const struct clk_pll_layout *layout, u32 flags) - { - struct sam9x60_div *div; - struct clk_hw *hw; - struct clk_init_data init; -- unsigned long flags; -+ unsigned long irqflags; - unsigned int val; - int ret; - -@@ -497,11 +606,11 @@ sam9x60_clk_register_div_pll(struct regm - init.name = name; - init.parent_names = &parent_name; - init.num_parents = 1; -- init.ops = &sam9x60_div_pll_ops; -- init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -- CLK_SET_RATE_PARENT; -- if (critical) -- init.flags |= CLK_IS_CRITICAL; -+ if (flags & CLK_SET_RATE_GATE) -+ init.ops = &sam9x60_div_pll_ops; -+ else -+ init.ops = &sam9x60_div_pll_ops_chg; -+ init.flags = flags; - - div->core.id = id; - div->core.hw.init = &init; -@@ -510,14 +619,14 @@ sam9x60_clk_register_div_pll(struct regm - div->core.regmap = regmap; - div->core.lock = lock; - -- spin_lock_irqsave(div->core.lock, flags); -+ spin_lock_irqsave(div->core.lock, irqflags); - - regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, - AT91_PMC_PLL_UPDT_ID_MSK, id); - regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val); - div->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val); - -- spin_unlock_irqrestore(div->core.lock, flags); -+ spin_unlock_irqrestore(div->core.lock, irqflags); - - hw = &div->core.hw; - ret = clk_hw_register(NULL, hw); ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -190,14 +190,14 @@ struct clk_hw * __init - sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, bool critical); -+ const struct clk_pll_layout *layout, u32 flags); - - struct clk_hw * __init - sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, - struct clk_hw *parent_hw, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, bool critical); -+ const struct clk_pll_layout *layout, u32 flags); - - struct clk_hw * __init - at91_clk_register_programmable(struct regmap *regmap, const char *name, ---- a/drivers/clk/at91/sam9x60.c -+++ b/drivers/clk/at91/sam9x60.c -@@ -224,13 +224,24 @@ static void __init sam9x60_pmc_setup(str - hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "pllack_fracck", - "mainck", sam9x60_pmc->chws[PMC_MAIN], - 0, &plla_characteristics, -- &pll_frac_layout, true); -+ &pll_frac_layout, -+ /* -+ * This feeds pllack_divck which -+ * feeds CPU. It should not be -+ * disabled. -+ */ -+ CLK_IS_CRITICAL | CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - - hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "pllack_divck", - "pllack_fracck", 0, &plla_characteristics, -- &pll_div_layout, true); -+ &pll_div_layout, -+ /* -+ * This feeds CPU. It should not -+ * be disabled. -+ */ -+ CLK_IS_CRITICAL | CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -239,13 +250,16 @@ static void __init sam9x60_pmc_setup(str - hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "upllck_fracck", - "main_osc", main_osc_hw, 1, - &upll_characteristics, -- &pll_frac_layout, false); -+ &pll_frac_layout, CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - - hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "upllck_divck", - "upllck_fracck", 1, &upll_characteristics, -- &pll_div_layout, false); -+ &pll_div_layout, -+ CLK_SET_RATE_GATE | -+ CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -95,15 +95,15 @@ static const struct clk_pll_layout pll_l - * @p: clock parent - * @l: clock layout - * @t: clock type -- * @f: true if clock is critical and cannot be disabled -+ * @f: clock flags - * @eid: export index in sama7g5->chws[] array - */ - static const struct { - const char *n; - const char *p; - const struct clk_pll_layout *l; -+ unsigned long f; - u8 t; -- u8 c; - u8 eid; - } sama7g5_plls[][PLL_ID_MAX] = { - [PLL_ID_CPU] = { -@@ -111,13 +111,18 @@ static const struct { - .p = "mainck", - .l = &pll_layout_frac, - .t = PLL_TYPE_FRAC, -- .c = 1, }, -+ /* -+ * This feeds cpupll_divpmcck which feeds CPU. It should -+ * not be disabled. -+ */ -+ .f = CLK_IS_CRITICAL, }, - - { .n = "cpupll_divpmcck", - .p = "cpupll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .c = 1, -+ /* This feeds CPU. It should not be disabled. */ -+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, - .eid = PMC_CPUPLL, }, - }, - -@@ -126,13 +131,22 @@ static const struct { - .p = "mainck", - .l = &pll_layout_frac, - .t = PLL_TYPE_FRAC, -- .c = 1, }, -+ /* -+ * This feeds syspll_divpmcck which may feed critial parts -+ * of the systems like timers. Therefore it should not be -+ * disabled. -+ */ -+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, }, - - { .n = "syspll_divpmcck", - .p = "syspll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .c = 1, -+ /* -+ * This may feed critial parts of the systems like timers. -+ * Therefore it should not be disabled. -+ */ -+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, - .eid = PMC_SYSPLL, }, - }, - -@@ -141,55 +155,71 @@ static const struct { - .p = "mainck", - .l = &pll_layout_frac, - .t = PLL_TYPE_FRAC, -- .c = 1, }, -+ /* -+ * This feeds ddrpll_divpmcck which feeds DDR. It should not -+ * be disabled. -+ */ -+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, }, - - { .n = "ddrpll_divpmcck", - .p = "ddrpll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -- .c = 1, }, -+ /* This feeds DDR. It should not be disabled. */ -+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, }, - }, - - [PLL_ID_IMG] = { - { .n = "imgpll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -- .t = PLL_TYPE_FRAC, }, -+ .t = PLL_TYPE_FRAC, -+ .f = CLK_SET_RATE_GATE, }, - - { .n = "imgpll_divpmcck", - .p = "imgpll_fracck", - .l = &pll_layout_divpmc, -- .t = PLL_TYPE_DIV, }, -+ .t = PLL_TYPE_DIV, -+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT, }, - }, - - [PLL_ID_BAUD] = { - { .n = "baudpll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -- .t = PLL_TYPE_FRAC, }, -+ .t = PLL_TYPE_FRAC, -+ .f = CLK_SET_RATE_GATE, }, - - { .n = "baudpll_divpmcck", - .p = "baudpll_fracck", - .l = &pll_layout_divpmc, -- .t = PLL_TYPE_DIV, }, -+ .t = PLL_TYPE_DIV, -+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT, }, - }, - - [PLL_ID_AUDIO] = { - { .n = "audiopll_fracck", - .p = "main_xtal", - .l = &pll_layout_frac, -- .t = PLL_TYPE_FRAC, }, -+ .t = PLL_TYPE_FRAC, -+ .f = CLK_SET_RATE_GATE, }, - - { .n = "audiopll_divpmcck", - .p = "audiopll_fracck", - .l = &pll_layout_divpmc, - .t = PLL_TYPE_DIV, -+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT, - .eid = PMC_AUDIOPMCPLL, }, - - { .n = "audiopll_diviock", - .p = "audiopll_fracck", - .l = &pll_layout_divio, - .t = PLL_TYPE_DIV, -+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT, - .eid = PMC_AUDIOIOPLL, }, - }, - -@@ -197,12 +227,15 @@ static const struct { - { .n = "ethpll_fracck", - .p = "main_xtal", - .l = &pll_layout_frac, -- .t = PLL_TYPE_FRAC, }, -+ .t = PLL_TYPE_FRAC, -+ .f = CLK_SET_RATE_GATE, }, - - { .n = "ethpll_divpmcck", - .p = "ethpll_fracck", - .l = &pll_layout_divpmc, -- .t = PLL_TYPE_DIV, }, -+ .t = PLL_TYPE_DIV, -+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | -+ CLK_SET_RATE_PARENT, }, - }, - }; - -@@ -890,7 +923,7 @@ static void __init sama7g5_pmc_setup(str - sama7g5_plls[i][j].p, parent_hw, i, - &pll_characteristics, - sama7g5_plls[i][j].l, -- sama7g5_plls[i][j].c); -+ sama7g5_plls[i][j].f); - break; - - case PLL_TYPE_DIV: -@@ -899,7 +932,7 @@ static void __init sama7g5_pmc_setup(str - sama7g5_plls[i][j].p, i, - &pll_characteristics, - sama7g5_plls[i][j].l, -- sama7g5_plls[i][j].c); -+ sama7g5_plls[i][j].f); - break; - - default: diff --git a/target/linux/at91/patches-5.15/107-clk-at91-clk-master-add-notifier-for-divider.patch b/target/linux/at91/patches-5.15/107-clk-at91-clk-master-add-notifier-for-divider.patch new file mode 100644 index 0000000000..83839e6a74 --- /dev/null +++ b/target/linux/at91/patches-5.15/107-clk-at91-clk-master-add-notifier-for-divider.patch @@ -0,0 +1,519 @@ +From 75d5d1d584ae73ba0c36d1d7255db6153ca4d3f3 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:16 +0300 +Subject: [PATCH 244/247] clk: at91: clk-master: add notifier for divider + +SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same +parent with cpuck as seen in the following clock tree: + + +----------> cpuck + | +FRAC PLL ---> DIV PLL -+-> DIV ---> mck0 + +mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking +while changing FRAC PLL or DIV PLL the commit implements a notifier for +mck0 which applies a safe divider to register (maximum value of the divider +which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not +overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE +events. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/at91rm9200.c | 2 +- + drivers/clk/at91/at91sam9260.c | 2 +- + drivers/clk/at91/at91sam9g45.c | 2 +- + drivers/clk/at91/at91sam9n12.c | 2 +- + drivers/clk/at91/at91sam9rl.c | 2 +- + drivers/clk/at91/at91sam9x5.c | 2 +- + drivers/clk/at91/clk-master.c | 244 +++++++++++++++++++++++---------- + drivers/clk/at91/dt-compat.c | 2 +- + drivers/clk/at91/pmc.h | 2 +- + drivers/clk/at91/sama5d2.c | 2 +- + drivers/clk/at91/sama5d3.c | 2 +- + drivers/clk/at91/sama5d4.c | 2 +- + drivers/clk/at91/sama7g5.c | 2 +- + 13 files changed, 186 insertions(+), 82 deletions(-) + +--- a/drivers/clk/at91/at91rm9200.c ++++ b/drivers/clk/at91/at91rm9200.c +@@ -152,7 +152,7 @@ static void __init at91rm9200_pmc_setup( + "masterck_pres", + &at91rm9200_master_layout, + &rm9200_mck_characteristics, +- &rm9200_mck_lock, CLK_SET_RATE_GATE); ++ &rm9200_mck_lock, CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/at91sam9260.c ++++ b/drivers/clk/at91/at91sam9260.c +@@ -429,7 +429,7 @@ static void __init at91sam926x_pmc_setup + &at91rm9200_master_layout, + data->mck_characteristics, + &at91sam9260_mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/at91sam9g45.c ++++ b/drivers/clk/at91/at91sam9g45.c +@@ -164,7 +164,7 @@ static void __init at91sam9g45_pmc_setup + &at91rm9200_master_layout, + &mck_characteristics, + &at91sam9g45_mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/at91sam9n12.c ++++ b/drivers/clk/at91/at91sam9n12.c +@@ -191,7 +191,7 @@ static void __init at91sam9n12_pmc_setup + &at91sam9x5_master_layout, + &mck_characteristics, + &at91sam9n12_mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/at91sam9rl.c ++++ b/drivers/clk/at91/at91sam9rl.c +@@ -132,7 +132,7 @@ static void __init at91sam9rl_pmc_setup( + "masterck_pres", + &at91rm9200_master_layout, + &sam9rl_mck_characteristics, +- &sam9rl_mck_lock, CLK_SET_RATE_GATE); ++ &sam9rl_mck_lock, CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/at91sam9x5.c ++++ b/drivers/clk/at91/at91sam9x5.c +@@ -210,7 +210,7 @@ static void __init at91sam9x5_pmc_setup( + "masterck_pres", + &at91sam9x5_master_layout, + &mck_characteristics, &mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/clk-master.c ++++ b/drivers/clk/at91/clk-master.c +@@ -5,6 +5,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -36,8 +37,12 @@ struct clk_master { + u8 id; + u8 parent; + u8 div; ++ u32 safe_div; + }; + ++/* MCK div reference to be used by notifier. */ ++static struct clk_master *master_div; ++ + static inline bool clk_master_ready(struct clk_master *master) + { + unsigned int bit = master->id ? AT91_PMC_MCKXRDY : AT91_PMC_MCKRDY; +@@ -153,107 +158,81 @@ static const struct clk_ops master_div_o + .restore_context = clk_master_div_restore_context, + }; + +-static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate, +- unsigned long parent_rate) ++/* This function must be called with lock acquired. */ ++static int clk_master_div_set(struct clk_master *master, ++ unsigned long parent_rate, int div) + { +- struct clk_master *master = to_clk_master(hw); + const struct clk_master_characteristics *characteristics = + master->characteristics; +- unsigned long flags; +- unsigned int mckr, tmp; +- int div, i; ++ unsigned long rate = parent_rate; ++ unsigned int max_div = 0, div_index = 0, max_div_index = 0; ++ unsigned int i, mckr, tmp; + int ret; + +- div = DIV_ROUND_CLOSEST(parent_rate, rate); +- if (div > ARRAY_SIZE(characteristics->divisors)) +- return -EINVAL; +- + for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { + if (!characteristics->divisors[i]) + break; + +- if (div == characteristics->divisors[i]) { +- div = i; +- break; ++ if (div == characteristics->divisors[i]) ++ div_index = i; ++ ++ if (max_div < characteristics->divisors[i]) { ++ max_div = characteristics->divisors[i]; ++ max_div_index = i; + } + } + +- if (i == ARRAY_SIZE(characteristics->divisors)) +- return -EINVAL; ++ if (div > max_div) ++ div_index = max_div_index; + +- spin_lock_irqsave(master->lock, flags); + ret = regmap_read(master->regmap, master->layout->offset, &mckr); + if (ret) +- goto unlock; ++ return ret; + + mckr &= master->layout->mask; + tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; +- if (tmp == div) +- goto unlock; ++ if (tmp == div_index) ++ return 0; ++ ++ rate /= characteristics->divisors[div_index]; ++ if (rate < characteristics->output.min) ++ pr_warn("master clk div is underclocked"); ++ else if (rate > characteristics->output.max) ++ pr_warn("master clk div is overclocked"); + + mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT); +- mckr |= (div << MASTER_DIV_SHIFT); ++ mckr |= (div_index << MASTER_DIV_SHIFT); + ret = regmap_write(master->regmap, master->layout->offset, mckr); + if (ret) +- goto unlock; ++ return ret; + + while (!clk_master_ready(master)) + cpu_relax(); +-unlock: +- spin_unlock_irqrestore(master->lock, flags); ++ ++ master->div = characteristics->divisors[div_index]; + + return 0; + } + +-static int clk_master_div_determine_rate(struct clk_hw *hw, +- struct clk_rate_request *req) ++static unsigned long clk_master_div_recalc_rate_chg(struct clk_hw *hw, ++ unsigned long parent_rate) + { + struct clk_master *master = to_clk_master(hw); +- const struct clk_master_characteristics *characteristics = +- master->characteristics; +- struct clk_hw *parent; +- unsigned long parent_rate, tmp_rate, best_rate = 0; +- int i, best_diff = INT_MIN, tmp_diff; +- +- parent = clk_hw_get_parent(hw); +- if (!parent) +- return -EINVAL; +- +- parent_rate = clk_hw_get_rate(parent); +- if (!parent_rate) +- return -EINVAL; + +- for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { +- if (!characteristics->divisors[i]) +- break; +- +- tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate, +- characteristics->divisors[i]); +- tmp_diff = abs(tmp_rate - req->rate); +- +- if (!best_rate || best_diff > tmp_diff) { +- best_diff = tmp_diff; +- best_rate = tmp_rate; +- } +- +- if (!best_diff) +- break; +- } +- +- req->best_parent_rate = best_rate; +- req->best_parent_hw = parent; +- req->rate = best_rate; +- +- return 0; ++ return DIV_ROUND_CLOSEST_ULL(parent_rate, master->div); + } + + static void clk_master_div_restore_context_chg(struct clk_hw *hw) + { + struct clk_master *master = to_clk_master(hw); ++ unsigned long flags; + int ret; + +- ret = clk_master_div_set_rate(hw, master->pms.rate, +- master->pms.parent_rate); ++ spin_lock_irqsave(master->lock, flags); ++ ret = clk_master_div_set(master, master->pms.parent_rate, ++ DIV_ROUND_CLOSEST(master->pms.parent_rate, ++ master->pms.rate)); ++ spin_unlock_irqrestore(master->lock, flags); + if (ret) + pr_warn("Failed to restore MCK DIV clock\n"); + } +@@ -261,13 +240,116 @@ static void clk_master_div_restore_conte + static const struct clk_ops master_div_ops_chg = { + .prepare = clk_master_prepare, + .is_prepared = clk_master_is_prepared, +- .recalc_rate = clk_master_div_recalc_rate, +- .determine_rate = clk_master_div_determine_rate, +- .set_rate = clk_master_div_set_rate, ++ .recalc_rate = clk_master_div_recalc_rate_chg, + .save_context = clk_master_div_save_context, + .restore_context = clk_master_div_restore_context_chg, + }; + ++static int clk_master_div_notifier_fn(struct notifier_block *notifier, ++ unsigned long code, void *data) ++{ ++ const struct clk_master_characteristics *characteristics = ++ master_div->characteristics; ++ struct clk_notifier_data *cnd = data; ++ unsigned long flags, new_parent_rate, new_rate; ++ unsigned int mckr, div, new_div = 0; ++ int ret, i; ++ long tmp_diff; ++ long best_diff = -1; ++ ++ spin_lock_irqsave(master_div->lock, flags); ++ switch (code) { ++ case PRE_RATE_CHANGE: ++ /* ++ * We want to avoid any overclocking of MCK DIV domain. To do ++ * this we set a safe divider (the underclocking is not of ++ * interest as we can go as low as 32KHz). The relation ++ * b/w this clock and its parents are as follows: ++ * ++ * FRAC PLL -> DIV PLL -> MCK DIV ++ * ++ * With the proper safe divider we should be good even with FRAC ++ * PLL at its maximum value. ++ */ ++ ret = regmap_read(master_div->regmap, master_div->layout->offset, ++ &mckr); ++ if (ret) { ++ ret = NOTIFY_STOP_MASK; ++ goto unlock; ++ } ++ ++ mckr &= master_div->layout->mask; ++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ ++ /* Switch to safe divider. */ ++ clk_master_div_set(master_div, ++ cnd->old_rate * characteristics->divisors[div], ++ master_div->safe_div); ++ break; ++ ++ case POST_RATE_CHANGE: ++ /* ++ * At this point we want to restore MCK DIV domain to its maximum ++ * allowed rate. ++ */ ++ ret = regmap_read(master_div->regmap, master_div->layout->offset, ++ &mckr); ++ if (ret) { ++ ret = NOTIFY_STOP_MASK; ++ goto unlock; ++ } ++ ++ mckr &= master_div->layout->mask; ++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ new_parent_rate = cnd->new_rate * characteristics->divisors[div]; ++ ++ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { ++ if (!characteristics->divisors[i]) ++ break; ++ ++ new_rate = DIV_ROUND_CLOSEST_ULL(new_parent_rate, ++ characteristics->divisors[i]); ++ ++ tmp_diff = characteristics->output.max - new_rate; ++ if (tmp_diff < 0) ++ continue; ++ ++ if (best_diff < 0 || best_diff > tmp_diff) { ++ new_div = characteristics->divisors[i]; ++ best_diff = tmp_diff; ++ } ++ ++ if (!tmp_diff) ++ break; ++ } ++ ++ if (!new_div) { ++ ret = NOTIFY_STOP_MASK; ++ goto unlock; ++ } ++ ++ /* Update the div to preserve MCK DIV clock rate. */ ++ clk_master_div_set(master_div, new_parent_rate, ++ new_div); ++ ++ ret = NOTIFY_OK; ++ break; ++ ++ default: ++ ret = NOTIFY_DONE; ++ break; ++ } ++ ++unlock: ++ spin_unlock_irqrestore(master_div->lock, flags); ++ ++ return ret; ++} ++ ++static struct notifier_block clk_master_div_notifier = { ++ .notifier_call = clk_master_div_notifier_fn, ++}; ++ + static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, + struct clk_hw *parent, + unsigned long parent_rate, +@@ -496,6 +578,8 @@ at91_clk_register_master_internal(struct + struct clk_master *master; + struct clk_init_data init; + struct clk_hw *hw; ++ unsigned int mckr; ++ unsigned long irqflags; + int ret; + + if (!name || !num_parents || !parent_names || !lock) +@@ -518,6 +602,16 @@ at91_clk_register_master_internal(struct + master->chg_pid = chg_pid; + master->lock = lock; + ++ if (ops == &master_div_ops_chg) { ++ spin_lock_irqsave(master->lock, irqflags); ++ regmap_read(master->regmap, master->layout->offset, &mckr); ++ spin_unlock_irqrestore(master->lock, irqflags); ++ ++ mckr &= layout->mask; ++ mckr = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; ++ master->div = characteristics->divisors[mckr]; ++ } ++ + hw = &master->hw; + ret = clk_hw_register(NULL, &master->hw); + if (ret) { +@@ -554,19 +648,29 @@ at91_clk_register_master_div(struct regm + const char *name, const char *parent_name, + const struct clk_master_layout *layout, + const struct clk_master_characteristics *characteristics, +- spinlock_t *lock, u32 flags) ++ spinlock_t *lock, u32 flags, u32 safe_div) + { + const struct clk_ops *ops; ++ struct clk_hw *hw; + + if (flags & CLK_SET_RATE_GATE) + ops = &master_div_ops; + else + ops = &master_div_ops_chg; + +- return at91_clk_register_master_internal(regmap, name, 1, +- &parent_name, layout, +- characteristics, ops, +- lock, flags, -EINVAL); ++ hw = at91_clk_register_master_internal(regmap, name, 1, ++ &parent_name, layout, ++ characteristics, ops, ++ lock, flags, -EINVAL); ++ ++ if (!IS_ERR(hw) && safe_div) { ++ master_div = to_clk_master(hw); ++ master_div->safe_div = safe_div; ++ clk_notifier_register(hw->clk, ++ &clk_master_div_notifier); ++ } ++ ++ return hw; + } + + static unsigned long +--- a/drivers/clk/at91/dt-compat.c ++++ b/drivers/clk/at91/dt-compat.c +@@ -399,7 +399,7 @@ of_at91_clk_master_setup(struct device_n + + hw = at91_clk_register_master_div(regmap, name, "masterck_pres", + layout, characteristics, +- &mck_lock, CLK_SET_RATE_GATE); ++ &mck_lock, CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto out_free_characteristics; + +--- a/drivers/clk/at91/pmc.h ++++ b/drivers/clk/at91/pmc.h +@@ -182,7 +182,7 @@ at91_clk_register_master_div(struct regm + const char *parent_names, + const struct clk_master_layout *layout, + const struct clk_master_characteristics *characteristics, +- spinlock_t *lock, u32 flags); ++ spinlock_t *lock, u32 flags, u32 safe_div); + + struct clk_hw * __init + at91_clk_sama7g5_register_master(struct regmap *regmap, +--- a/drivers/clk/at91/sama5d2.c ++++ b/drivers/clk/at91/sama5d2.c +@@ -249,7 +249,7 @@ static void __init sama5d2_pmc_setup(str + "masterck_pres", + &at91sam9x5_master_layout, + &mck_characteristics, &mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/sama5d3.c ++++ b/drivers/clk/at91/sama5d3.c +@@ -184,7 +184,7 @@ static void __init sama5d3_pmc_setup(str + "masterck_pres", + &at91sam9x5_master_layout, + &mck_characteristics, &mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/sama5d4.c ++++ b/drivers/clk/at91/sama5d4.c +@@ -199,7 +199,7 @@ static void __init sama5d4_pmc_setup(str + "masterck_pres", + &at91sam9x5_master_layout, + &mck_characteristics, &mck_lock, +- CLK_SET_RATE_GATE); ++ CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + +--- a/drivers/clk/at91/sama7g5.c ++++ b/drivers/clk/at91/sama7g5.c +@@ -993,7 +993,7 @@ static void __init sama7g5_pmc_setup(str + parent_names[0] = "cpupll_divpmcck"; + hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck", + &mck0_layout, &mck0_characteristics, +- &pmc_mck0_lock, 0); ++ &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5); + if (IS_ERR(hw)) + goto err_free; + diff --git a/target/linux/at91/patches-5.15/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch b/target/linux/at91/patches-5.15/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch deleted file mode 100644 index 209c40cf2f..0000000000 --- a/target/linux/at91/patches-5.15/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch +++ /dev/null @@ -1,196 +0,0 @@ -From 7cfe2dfe5ac7c72b904e4b59b240caa42721ee07 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:13 +0200 -Subject: [PATCH 107/247] clk: at91: sama7g5: remove mck0 from parent list of - other clocks - -MCK0 is changed at runtime by DVFS. Due to this, since not all IPs -are glitch free aware at MCK0 changes, remove MCK0 from parent list -of other clocks (e.g. generic clock, programmable/system clock, MCKX). - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 55 ++++++++++++++++++-------------------- - 1 file changed, 26 insertions(+), 29 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -280,7 +280,7 @@ static const struct { - .ep = { "syspll_divpmcck", "ddrpll_divpmcck", "imgpll_divpmcck", }, - .ep_mux_table = { 5, 6, 7, }, - .ep_count = 3, -- .ep_chg_id = 6, }, -+ .ep_chg_id = 5, }, - - { .n = "mck4", - .id = 4, -@@ -313,7 +313,7 @@ static const struct { - }; - - /* Mux table for programmable clocks. */ --static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, }; -+static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, }; - - /** - * Peripheral clock description -@@ -436,7 +436,7 @@ static const struct { - .pp = { "audiopll_divpmcck", }, - .pp_mux_table = { 9, }, - .pp_count = 1, -- .pp_chg_id = 4, }, -+ .pp_chg_id = 3, }, - - { .n = "csi_gclk", - .id = 33, -@@ -548,7 +548,7 @@ static const struct { - .pp = { "ethpll_divpmcck", }, - .pp_mux_table = { 10, }, - .pp_count = 1, -- .pp_chg_id = 4, }, -+ .pp_chg_id = 3, }, - - { .n = "gmac1_gclk", - .id = 52, -@@ -580,7 +580,7 @@ static const struct { - .pp = { "syspll_divpmcck", "audiopll_divpmcck", }, - .pp_mux_table = { 5, 9, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "i2smcc1_gclk", - .id = 58, -@@ -588,7 +588,7 @@ static const struct { - .pp = { "syspll_divpmcck", "audiopll_divpmcck", }, - .pp_mux_table = { 5, 9, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "mcan0_gclk", - .id = 61, -@@ -730,7 +730,7 @@ static const struct { - .pp = { "syspll_divpmcck", "baudpll_divpmcck", }, - .pp_mux_table = { 5, 8, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "sdmmc1_gclk", - .id = 81, -@@ -738,7 +738,7 @@ static const struct { - .pp = { "syspll_divpmcck", "baudpll_divpmcck", }, - .pp_mux_table = { 5, 8, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "sdmmc2_gclk", - .id = 82, -@@ -746,7 +746,7 @@ static const struct { - .pp = { "syspll_divpmcck", "baudpll_divpmcck", }, - .pp_mux_table = { 5, 8, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "spdifrx_gclk", - .id = 84, -@@ -754,7 +754,7 @@ static const struct { - .pp = { "syspll_divpmcck", "audiopll_divpmcck", }, - .pp_mux_table = { 5, 9, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "spdiftx_gclk", - .id = 85, -@@ -762,7 +762,7 @@ static const struct { - .pp = { "syspll_divpmcck", "audiopll_divpmcck", }, - .pp_mux_table = { 5, 9, }, - .pp_count = 2, -- .pp_chg_id = 5, }, -+ .pp_chg_id = 4, }, - - { .n = "tcb0_ch0_gclk", - .id = 88, -@@ -961,9 +961,8 @@ static void __init sama7g5_pmc_setup(str - parent_names[0] = md_slck_name; - parent_names[1] = td_slck_name; - parent_names[2] = "mainck"; -- parent_names[3] = "mck0"; - for (i = 0; i < ARRAY_SIZE(sama7g5_mckx); i++) { -- u8 num_parents = 4 + sama7g5_mckx[i].ep_count; -+ u8 num_parents = 3 + sama7g5_mckx[i].ep_count; - u32 *mux_table; - - mux_table = kmalloc_array(num_parents, sizeof(*mux_table), -@@ -971,10 +970,10 @@ static void __init sama7g5_pmc_setup(str - if (!mux_table) - goto err_free; - -- SAMA7G5_INIT_TABLE(mux_table, 4); -- SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_mckx[i].ep_mux_table, -+ SAMA7G5_INIT_TABLE(mux_table, 3); -+ SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_mckx[i].ep_mux_table, - sama7g5_mckx[i].ep_count); -- SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_mckx[i].ep, -+ SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_mckx[i].ep, - sama7g5_mckx[i].ep_count); - - hw = at91_clk_sama7g5_register_master(regmap, sama7g5_mckx[i].n, -@@ -997,20 +996,19 @@ static void __init sama7g5_pmc_setup(str - parent_names[0] = md_slck_name; - parent_names[1] = td_slck_name; - parent_names[2] = "mainck"; -- parent_names[3] = "mck0"; -- parent_names[4] = "syspll_divpmcck"; -- parent_names[5] = "ddrpll_divpmcck"; -- parent_names[6] = "imgpll_divpmcck"; -- parent_names[7] = "baudpll_divpmcck"; -- parent_names[8] = "audiopll_divpmcck"; -- parent_names[9] = "ethpll_divpmcck"; -+ parent_names[3] = "syspll_divpmcck"; -+ parent_names[4] = "ddrpll_divpmcck"; -+ parent_names[5] = "imgpll_divpmcck"; -+ parent_names[6] = "baudpll_divpmcck"; -+ parent_names[7] = "audiopll_divpmcck"; -+ parent_names[8] = "ethpll_divpmcck"; - for (i = 0; i < 8; i++) { - char name[6]; - - snprintf(name, sizeof(name), "prog%d", i); - - hw = at91_clk_register_programmable(regmap, name, parent_names, -- 10, i, -+ 9, i, - &programmable_layout, - sama7g5_prog_mux_table); - if (IS_ERR(hw)) -@@ -1047,9 +1045,8 @@ static void __init sama7g5_pmc_setup(str - parent_names[0] = md_slck_name; - parent_names[1] = td_slck_name; - parent_names[2] = "mainck"; -- parent_names[3] = "mck0"; - for (i = 0; i < ARRAY_SIZE(sama7g5_gck); i++) { -- u8 num_parents = 4 + sama7g5_gck[i].pp_count; -+ u8 num_parents = 3 + sama7g5_gck[i].pp_count; - u32 *mux_table; - - mux_table = kmalloc_array(num_parents, sizeof(*mux_table), -@@ -1057,10 +1054,10 @@ static void __init sama7g5_pmc_setup(str - if (!mux_table) - goto err_free; - -- SAMA7G5_INIT_TABLE(mux_table, 4); -- SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_gck[i].pp_mux_table, -+ SAMA7G5_INIT_TABLE(mux_table, 3); -+ SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_gck[i].pp_mux_table, - sama7g5_gck[i].pp_count); -- SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_gck[i].pp, -+ SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_gck[i].pp, - sama7g5_gck[i].pp_count); - - hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, diff --git a/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch b/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch deleted file mode 100644 index 2bc1907cfb..0000000000 --- a/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 8b88f1e9918c173b24b43015cdb713cdde9e4d17 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:14 +0200 -Subject: [PATCH 108/247] clk: at91: sama7g5: decrease lower limit for MCK0 - rate - -On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and -CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is -also changed by DVFS to avoid over/under clocking of MCK0 consumers. -The lower limit is changed to be able to set MCK0 accordingly by -DVFS. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -807,7 +807,7 @@ static const struct clk_pll_characterist - - /* MCK0 characteristics. */ - static const struct clk_master_characteristics mck0_characteristics = { -- .output = { .min = 140000000, .max = 200000000 }, -+ .output = { .min = 50000000, .max = 200000000 }, - .divisors = { 1, 2, 4, 3, 5 }, - .have_div3_pres = 1, - }; diff --git a/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch b/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch new file mode 100644 index 0000000000..6cdec0add7 --- /dev/null +++ b/target/linux/at91/patches-5.15/108-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch @@ -0,0 +1,26 @@ +From 9fd5a49f6da9de5da83f4a53eccefad647ab15ed Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:18 +0300 +Subject: [PATCH 246/247] clk: at91: sama7g5: set low limit for mck0 at 32KHz + +MCK0 could go as low as 32KHz. Set this limit. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-15-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +Signed-off-by: Stephen Boyd +--- + drivers/clk/at91/sama7g5.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/at91/sama7g5.c ++++ b/drivers/clk/at91/sama7g5.c +@@ -849,7 +849,7 @@ static const struct { + + /* MCK0 characteristics. */ + static const struct clk_master_characteristics mck0_characteristics = { +- .output = { .min = 50000000, .max = 200000000 }, ++ .output = { .min = 32768, .max = 200000000 }, + .divisors = { 1, 2, 4, 3, 5 }, + .have_div3_pres = 1, + }; diff --git a/target/linux/at91/patches-5.15/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch b/target/linux/at91/patches-5.15/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch deleted file mode 100644 index b11efc9d4e..0000000000 --- a/target/linux/at91/patches-5.15/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch +++ /dev/null @@ -1,221 +0,0 @@ -From 943ed75a2a5ab08582d3bc8025e8111903698763 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:15 +0200 -Subject: [PATCH 109/247] clk: at91: sama7g5: do not allow cpu pll to go higher - than 1GHz - -Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher -than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at -1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 61 +++++++++++++++++++++++++++++--------- - 1 file changed, 47 insertions(+), 14 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -89,11 +89,40 @@ static const struct clk_pll_layout pll_l - .endiv_shift = 30, - }; - -+/* -+ * CPU PLL output range. -+ * Notice: The upper limit has been setup to 1000000002 due to hardware -+ * block which cannot output exactly 1GHz. -+ */ -+static const struct clk_range cpu_pll_outputs[] = { -+ { .min = 2343750, .max = 1000000002 }, -+}; -+ -+/* PLL output range. */ -+static const struct clk_range pll_outputs[] = { -+ { .min = 2343750, .max = 1200000000 }, -+}; -+ -+/* CPU PLL characteristics. */ -+static const struct clk_pll_characteristics cpu_pll_characteristics = { -+ .input = { .min = 12000000, .max = 50000000 }, -+ .num_output = ARRAY_SIZE(cpu_pll_outputs), -+ .output = cpu_pll_outputs, -+}; -+ -+/* PLL characteristics. */ -+static const struct clk_pll_characteristics pll_characteristics = { -+ .input = { .min = 12000000, .max = 50000000 }, -+ .num_output = ARRAY_SIZE(pll_outputs), -+ .output = pll_outputs, -+}; -+ - /** - * PLL clocks description - * @n: clock name - * @p: clock parent - * @l: clock layout -+ * @c: clock characteristics - * @t: clock type - * @f: clock flags - * @eid: export index in sama7g5->chws[] array -@@ -102,6 +131,7 @@ static const struct { - const char *n; - const char *p; - const struct clk_pll_layout *l; -+ const struct clk_pll_characteristics *c; - unsigned long f; - u8 t; - u8 eid; -@@ -110,6 +140,7 @@ static const struct { - { .n = "cpupll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -+ .c = &cpu_pll_characteristics, - .t = PLL_TYPE_FRAC, - /* - * This feeds cpupll_divpmcck which feeds CPU. It should -@@ -120,6 +151,7 @@ static const struct { - { .n = "cpupll_divpmcck", - .p = "cpupll_fracck", - .l = &pll_layout_divpmc, -+ .c = &cpu_pll_characteristics, - .t = PLL_TYPE_DIV, - /* This feeds CPU. It should not be disabled. */ - .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, -@@ -130,6 +162,7 @@ static const struct { - { .n = "syspll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - /* - * This feeds syspll_divpmcck which may feed critial parts -@@ -141,6 +174,7 @@ static const struct { - { .n = "syspll_divpmcck", - .p = "syspll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - /* - * This may feed critial parts of the systems like timers. -@@ -154,6 +188,7 @@ static const struct { - { .n = "ddrpll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - /* - * This feeds ddrpll_divpmcck which feeds DDR. It should not -@@ -164,6 +199,7 @@ static const struct { - { .n = "ddrpll_divpmcck", - .p = "ddrpll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - /* This feeds DDR. It should not be disabled. */ - .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, }, -@@ -173,12 +209,14 @@ static const struct { - { .n = "imgpll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - .f = CLK_SET_RATE_GATE, }, - - { .n = "imgpll_divpmcck", - .p = "imgpll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | - CLK_SET_RATE_PARENT, }, -@@ -188,12 +226,14 @@ static const struct { - { .n = "baudpll_fracck", - .p = "mainck", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - .f = CLK_SET_RATE_GATE, }, - - { .n = "baudpll_divpmcck", - .p = "baudpll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | - CLK_SET_RATE_PARENT, }, -@@ -203,12 +243,14 @@ static const struct { - { .n = "audiopll_fracck", - .p = "main_xtal", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - .f = CLK_SET_RATE_GATE, }, - - { .n = "audiopll_divpmcck", - .p = "audiopll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | - CLK_SET_RATE_PARENT, -@@ -217,6 +259,7 @@ static const struct { - { .n = "audiopll_diviock", - .p = "audiopll_fracck", - .l = &pll_layout_divio, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | - CLK_SET_RATE_PARENT, -@@ -227,12 +270,14 @@ static const struct { - { .n = "ethpll_fracck", - .p = "main_xtal", - .l = &pll_layout_frac, -+ .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - .f = CLK_SET_RATE_GATE, }, - - { .n = "ethpll_divpmcck", - .p = "ethpll_fracck", - .l = &pll_layout_divpmc, -+ .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | - CLK_SET_RATE_PARENT, }, -@@ -793,18 +838,6 @@ static const struct { - .pp_chg_id = INT_MIN, }, - }; - --/* PLL output range. */ --static const struct clk_range pll_outputs[] = { -- { .min = 2343750, .max = 1200000000 }, --}; -- --/* PLL characteristics. */ --static const struct clk_pll_characteristics pll_characteristics = { -- .input = { .min = 12000000, .max = 50000000 }, -- .num_output = ARRAY_SIZE(pll_outputs), -- .output = pll_outputs, --}; -- - /* MCK0 characteristics. */ - static const struct clk_master_characteristics mck0_characteristics = { - .output = { .min = 50000000, .max = 200000000 }, -@@ -921,7 +954,7 @@ static void __init sama7g5_pmc_setup(str - hw = sam9x60_clk_register_frac_pll(regmap, - &pmc_pll_lock, sama7g5_plls[i][j].n, - sama7g5_plls[i][j].p, parent_hw, i, -- &pll_characteristics, -+ sama7g5_plls[i][j].c, - sama7g5_plls[i][j].l, - sama7g5_plls[i][j].f); - break; -@@ -930,7 +963,7 @@ static void __init sama7g5_pmc_setup(str - hw = sam9x60_clk_register_div_pll(regmap, - &pmc_pll_lock, sama7g5_plls[i][j].n, - sama7g5_plls[i][j].p, i, -- &pll_characteristics, -+ sama7g5_plls[i][j].c, - sama7g5_plls[i][j].l, - sama7g5_plls[i][j].f); - break; diff --git a/target/linux/at91/patches-5.15/109-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch b/target/linux/at91/patches-5.15/109-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch new file mode 100644 index 0000000000..32e760ac17 --- /dev/null +++ b/target/linux/at91/patches-5.15/109-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch @@ -0,0 +1,32 @@ +From fe07791494a78d5a4be1363385e6ba7940740644 Mon Sep 17 00:00:00 2001 +From: Claudiu Beznea +Date: Mon, 11 Oct 2021 14:27:19 +0300 +Subject: [PATCH 247/247] clk: use clk_core_get_rate_recalc() in clk_rate_get() + +In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get() +will return the cached rate. Thus, use clk_core_get_rate_recalc() which +takes proper action when clock flags contains CLK_GET_RATE_NOCACHE. + +Signed-off-by: Claudiu Beznea +Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.com +Acked-by: Nicolas Ferre +[sboyd@kernel.org: Grab prepare lock around operation] +Signed-off-by: Stephen Boyd +--- + drivers/clk/clk.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/clk/clk.c ++++ b/drivers/clk/clk.c +@@ -3131,7 +3131,10 @@ static int clk_rate_get(void *data, u64 + { + struct clk_core *core = data; + +- *val = core->rate; ++ clk_prepare_lock(); ++ *val = clk_core_get_rate_recalc(core); ++ clk_prepare_unlock(); ++ + return 0; + } + diff --git a/target/linux/at91/patches-5.15/110-clk-at91-clk-master-re-factor-master-clock.patch b/target/linux/at91/patches-5.15/110-clk-at91-clk-master-re-factor-master-clock.patch deleted file mode 100644 index a0eadd8886..0000000000 --- a/target/linux/at91/patches-5.15/110-clk-at91-clk-master-re-factor-master-clock.patch +++ /dev/null @@ -1,1230 +0,0 @@ -From 9109b768fe65994547ef464b13e508b22de3e89b Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:16 +0200 -Subject: [PATCH 110/247] clk: at91: clk-master: re-factor master clock - -Re-factor master clock driver by splitting it into 2 clocks: prescaller -and divider clocks. Based on registered clock flags the prescaler's rate -could be changed at runtime. This is necessary for platforms supporting -DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/at91rm9200.c | 21 ++- - drivers/clk/at91/at91sam9260.c | 26 ++- - drivers/clk/at91/at91sam9g45.c | 32 +++- - drivers/clk/at91/at91sam9n12.c | 36 ++-- - drivers/clk/at91/at91sam9rl.c | 23 ++- - drivers/clk/at91/at91sam9x5.c | 28 ++- - drivers/clk/at91/clk-master.c | 335 ++++++++++++++++++++++++++++----- - drivers/clk/at91/dt-compat.c | 15 +- - drivers/clk/at91/pmc.h | 16 +- - drivers/clk/at91/sam9x60.c | 23 ++- - drivers/clk/at91/sama5d2.c | 42 +++-- - drivers/clk/at91/sama5d3.c | 38 ++-- - drivers/clk/at91/sama5d4.c | 40 ++-- - drivers/clk/at91/sama7g5.c | 13 +- - 14 files changed, 542 insertions(+), 146 deletions(-) - ---- a/drivers/clk/at91/at91rm9200.c -+++ b/drivers/clk/at91/at91rm9200.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(rm9200_mck_lock); -+ - struct sck { - char *n; - char *p; -@@ -137,9 +139,20 @@ static void __init at91rm9200_pmc_setup( - parent_names[1] = "mainck"; - parent_names[2] = "pllack"; - parent_names[3] = "pllbck"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91rm9200_master_layout, -- &rm9200_mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91rm9200_master_layout, -+ &rm9200_mck_characteristics, -+ &rm9200_mck_lock, CLK_SET_RATE_GATE, -+ INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91rm9200_master_layout, -+ &rm9200_mck_characteristics, -+ &rm9200_mck_lock, CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -181,7 +194,7 @@ static void __init at91rm9200_pmc_setup( - for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) { - hw = at91_clk_register_peripheral(regmap, - at91rm9200_periphck[i].n, -- "masterck", -+ "masterck_div", - at91rm9200_periphck[i].id); - if (IS_ERR(hw)) - goto err_free; ---- a/drivers/clk/at91/at91sam9260.c -+++ b/drivers/clk/at91/at91sam9260.c -@@ -32,6 +32,8 @@ struct at91sam926x_data { - bool has_slck; - }; - -+static DEFINE_SPINLOCK(at91sam9260_mck_lock); -+ - static const struct clk_master_characteristics sam9260_mck_characteristics = { - .output = { .min = 0, .max = 105000000 }, - .divisors = { 1, 2, 4, 0 }, -@@ -218,8 +220,8 @@ static const struct sck at91sam9261_syst - { .n = "pck1", .p = "prog1", .id = 9 }, - { .n = "pck2", .p = "prog2", .id = 10 }, - { .n = "pck3", .p = "prog3", .id = 11 }, -- { .n = "hclk0", .p = "masterck", .id = 16 }, -- { .n = "hclk1", .p = "masterck", .id = 17 }, -+ { .n = "hclk0", .p = "masterck_div", .id = 16 }, -+ { .n = "hclk1", .p = "masterck_div", .id = 17 }, - }; - - static const struct pck at91sam9261_periphck[] = { -@@ -413,9 +415,21 @@ static void __init at91sam926x_pmc_setup - parent_names[1] = "mainck"; - parent_names[2] = "pllack"; - parent_names[3] = "pllbck"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91rm9200_master_layout, -- data->mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91rm9200_master_layout, -+ data->mck_characteristics, -+ &at91sam9260_mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91rm9200_master_layout, -+ data->mck_characteristics, -+ &at91sam9260_mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -457,7 +471,7 @@ static void __init at91sam926x_pmc_setup - for (i = 0; i < data->num_pck; i++) { - hw = at91_clk_register_peripheral(regmap, - data->pck[i].n, -- "masterck", -+ "masterck_div", - data->pck[i].id); - if (IS_ERR(hw)) - goto err_free; ---- a/drivers/clk/at91/at91sam9g45.c -+++ b/drivers/clk/at91/at91sam9g45.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(at91sam9g45_mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 0, .max = 133333333 }, - .divisors = { 1, 2, 4, 3 }, -@@ -40,10 +42,10 @@ static const struct { - char *p; - u8 id; - } at91sam9g45_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -- { .n = "uhpck", .p = "usbck", .id = 6 }, -- { .n = "pck0", .p = "prog0", .id = 8 }, -- { .n = "pck1", .p = "prog1", .id = 9 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, -+ { .n = "uhpck", .p = "usbck", .id = 6 }, -+ { .n = "pck0", .p = "prog0", .id = 8 }, -+ { .n = "pck1", .p = "prog1", .id = 9 }, - }; - - struct pck { -@@ -148,9 +150,21 @@ static void __init at91sam9g45_pmc_setup - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91rm9200_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91rm9200_master_layout, -+ &mck_characteristics, -+ &at91sam9g45_mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91rm9200_master_layout, -+ &mck_characteristics, -+ &at91sam9g45_mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -166,7 +180,7 @@ static void __init at91sam9g45_pmc_setup - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 2; i++) { - char name[6]; - -@@ -195,7 +209,7 @@ static void __init at91sam9g45_pmc_setup - for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) { - hw = at91_clk_register_peripheral(regmap, - at91sam9g45_periphck[i].n, -- "masterck", -+ "masterck_div", - at91sam9g45_periphck[i].id); - if (IS_ERR(hw)) - goto err_free; ---- a/drivers/clk/at91/at91sam9n12.c -+++ b/drivers/clk/at91/at91sam9n12.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(at91sam9n12_mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 0, .max = 133333333 }, - .divisors = { 1, 2, 4, 3 }, -@@ -54,12 +56,12 @@ static const struct { - char *p; - u8 id; - } at91sam9n12_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -- { .n = "lcdck", .p = "masterck", .id = 3 }, -- { .n = "uhpck", .p = "usbck", .id = 6 }, -- { .n = "udpck", .p = "usbck", .id = 7 }, -- { .n = "pck0", .p = "prog0", .id = 8 }, -- { .n = "pck1", .p = "prog1", .id = 9 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, -+ { .n = "lcdck", .p = "masterck_div", .id = 3 }, -+ { .n = "uhpck", .p = "usbck", .id = 6 }, -+ { .n = "udpck", .p = "usbck", .id = 7 }, -+ { .n = "pck0", .p = "prog0", .id = 8 }, -+ { .n = "pck1", .p = "prog1", .id = 9 }, - }; - - static const struct clk_pcr_layout at91sam9n12_pcr_layout = { -@@ -175,9 +177,21 @@ static void __init at91sam9n12_pmc_setup - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "pllbck"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91sam9x5_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91sam9x5_master_layout, -+ &mck_characteristics, -+ &at91sam9n12_mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91sam9x5_master_layout, -+ &mck_characteristics, -+ &at91sam9n12_mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -191,7 +205,7 @@ static void __init at91sam9n12_pmc_setup - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "pllbck"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 2; i++) { - char name[6]; - -@@ -221,7 +235,7 @@ static void __init at91sam9n12_pmc_setup - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &at91sam9n12_pcr_layout, - at91sam9n12_periphck[i].n, -- "masterck", -+ "masterck_div", - at91sam9n12_periphck[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) ---- a/drivers/clk/at91/at91sam9rl.c -+++ b/drivers/clk/at91/at91sam9rl.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(sam9rl_mck_lock); -+ - static const struct clk_master_characteristics sam9rl_mck_characteristics = { - .output = { .min = 0, .max = 94000000 }, - .divisors = { 1, 2, 4, 0 }, -@@ -117,9 +119,20 @@ static void __init at91sam9rl_pmc_setup( - parent_names[1] = "mainck"; - parent_names[2] = "pllack"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91rm9200_master_layout, -- &sam9rl_mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91rm9200_master_layout, -+ &sam9rl_mck_characteristics, -+ &sam9rl_mck_lock, CLK_SET_RATE_GATE, -+ INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91rm9200_master_layout, -+ &sam9rl_mck_characteristics, -+ &sam9rl_mck_lock, CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -129,7 +142,7 @@ static void __init at91sam9rl_pmc_setup( - parent_names[1] = "mainck"; - parent_names[2] = "pllack"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 2; i++) { - char name[6]; - -@@ -158,7 +171,7 @@ static void __init at91sam9rl_pmc_setup( - for (i = 0; i < ARRAY_SIZE(at91sam9rl_periphck); i++) { - hw = at91_clk_register_peripheral(regmap, - at91sam9rl_periphck[i].n, -- "masterck", -+ "masterck_div", - at91sam9rl_periphck[i].id); - if (IS_ERR(hw)) - goto err_free; ---- a/drivers/clk/at91/at91sam9x5.c -+++ b/drivers/clk/at91/at91sam9x5.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 0, .max = 133333333 }, - .divisors = { 1, 2, 4, 3 }, -@@ -41,7 +43,7 @@ static const struct { - char *p; - u8 id; - } at91sam9x5_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, - { .n = "smdck", .p = "smdclk", .id = 4 }, - { .n = "uhpck", .p = "usbck", .id = 6 }, - { .n = "udpck", .p = "usbck", .id = 7 }, -@@ -196,9 +198,19 @@ static void __init at91sam9x5_pmc_setup( - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91sam9x5_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -218,7 +230,7 @@ static void __init at91sam9x5_pmc_setup( - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 2; i++) { - char name[6]; - -@@ -245,7 +257,7 @@ static void __init at91sam9x5_pmc_setup( - } - - if (has_lcdck) { -- hw = at91_clk_register_system(regmap, "lcdck", "masterck", 3); -+ hw = at91_clk_register_system(regmap, "lcdck", "masterck_div", 3); - if (IS_ERR(hw)) - goto err_free; - -@@ -256,7 +268,7 @@ static void __init at91sam9x5_pmc_setup( - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &at91sam9x5_pcr_layout, - at91sam9x5_periphck[i].n, -- "masterck", -+ "masterck_div", - at91sam9x5_periphck[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) -@@ -269,7 +281,7 @@ static void __init at91sam9x5_pmc_setup( - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &at91sam9x5_pcr_layout, - extra_pcks[i].n, -- "masterck", -+ "masterck_div", - extra_pcks[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -58,83 +58,309 @@ static inline bool clk_master_ready(stru - static int clk_master_prepare(struct clk_hw *hw) - { - struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; -+ -+ spin_lock_irqsave(master->lock, flags); - - while (!clk_master_ready(master)) - cpu_relax(); - -+ spin_unlock_irqrestore(master->lock, flags); -+ - return 0; - } - - static int clk_master_is_prepared(struct clk_hw *hw) - { - struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; -+ bool status; -+ -+ spin_lock_irqsave(master->lock, flags); -+ status = clk_master_ready(master); -+ spin_unlock_irqrestore(master->lock, flags); - -- return clk_master_ready(master); -+ return status; - } - --static unsigned long clk_master_recalc_rate(struct clk_hw *hw, -- unsigned long parent_rate) -+static unsigned long clk_master_div_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) - { -- u8 pres; - u8 div; -- unsigned long rate = parent_rate; -+ unsigned long flags, rate = parent_rate; - struct clk_master *master = to_clk_master(hw); - const struct clk_master_layout *layout = master->layout; - const struct clk_master_characteristics *characteristics = - master->characteristics; - unsigned int mckr; - -+ spin_lock_irqsave(master->lock, flags); - regmap_read(master->regmap, master->layout->offset, &mckr); -+ spin_unlock_irqrestore(master->lock, flags); -+ - mckr &= layout->mask; - -- pres = (mckr >> layout->pres_shift) & MASTER_PRES_MASK; - div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; - -- if (characteristics->have_div3_pres && pres == MASTER_PRES_MAX) -- rate /= 3; -- else -- rate >>= pres; -- - rate /= characteristics->divisors[div]; - - if (rate < characteristics->output.min) -- pr_warn("master clk is underclocked"); -+ pr_warn("master clk div is underclocked"); - else if (rate > characteristics->output.max) -- pr_warn("master clk is overclocked"); -+ pr_warn("master clk div is overclocked"); - - return rate; - } - --static u8 clk_master_get_parent(struct clk_hw *hw) -+static const struct clk_ops master_div_ops = { -+ .prepare = clk_master_prepare, -+ .is_prepared = clk_master_is_prepared, -+ .recalc_rate = clk_master_div_recalc_rate, -+}; -+ -+static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ const struct clk_master_characteristics *characteristics = -+ master->characteristics; -+ unsigned long flags; -+ int div, i; -+ -+ div = DIV_ROUND_CLOSEST(parent_rate, rate); -+ if (div > ARRAY_SIZE(characteristics->divisors)) -+ return -EINVAL; -+ -+ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { -+ if (!characteristics->divisors[i]) -+ break; -+ -+ if (div == characteristics->divisors[i]) { -+ div = i; -+ break; -+ } -+ } -+ -+ if (i == ARRAY_SIZE(characteristics->divisors)) -+ return -EINVAL; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_update_bits(master->regmap, master->layout->offset, -+ (MASTER_DIV_MASK << MASTER_DIV_SHIFT), -+ (div << MASTER_DIV_SHIFT)); -+ while (!clk_master_ready(master)) -+ cpu_relax(); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ return 0; -+} -+ -+static int clk_master_div_determine_rate(struct clk_hw *hw, -+ struct clk_rate_request *req) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ const struct clk_master_characteristics *characteristics = -+ master->characteristics; -+ struct clk_hw *parent; -+ unsigned long parent_rate, tmp_rate, best_rate = 0; -+ int i, best_diff = INT_MIN, tmp_diff; -+ -+ parent = clk_hw_get_parent(hw); -+ if (!parent) -+ return -EINVAL; -+ -+ parent_rate = clk_hw_get_rate(parent); -+ if (!parent_rate) -+ return -EINVAL; -+ -+ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { -+ if (!characteristics->divisors[i]) -+ break; -+ -+ tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate, -+ characteristics->divisors[i]); -+ tmp_diff = abs(tmp_rate - req->rate); -+ -+ if (!best_rate || best_diff > tmp_diff) { -+ best_diff = tmp_diff; -+ best_rate = tmp_rate; -+ } -+ -+ if (!best_diff) -+ break; -+ } -+ -+ req->best_parent_rate = best_rate; -+ req->best_parent_hw = parent; -+ req->rate = best_rate; -+ -+ return 0; -+} -+ -+static const struct clk_ops master_div_ops_chg = { -+ .prepare = clk_master_prepare, -+ .is_prepared = clk_master_is_prepared, -+ .recalc_rate = clk_master_div_recalc_rate, -+ .determine_rate = clk_master_div_determine_rate, -+ .set_rate = clk_master_div_set_rate, -+}; -+ -+static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, -+ struct clk_hw *parent, -+ unsigned long parent_rate, -+ long *best_rate, -+ long *best_diff, -+ u32 div) -+{ -+ unsigned long tmp_rate, tmp_diff; -+ -+ if (div == MASTER_PRES_MAX) -+ tmp_rate = parent_rate / 3; -+ else -+ tmp_rate = parent_rate >> div; -+ -+ tmp_diff = abs(req->rate - tmp_rate); -+ -+ if (*best_diff < 0 || *best_diff >= tmp_diff) { -+ *best_rate = tmp_rate; -+ *best_diff = tmp_diff; -+ req->best_parent_rate = parent_rate; -+ req->best_parent_hw = parent; -+ } -+} -+ -+static int clk_master_pres_determine_rate(struct clk_hw *hw, -+ struct clk_rate_request *req) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ struct clk_rate_request req_parent = *req; -+ const struct clk_master_characteristics *characteristics = -+ master->characteristics; -+ struct clk_hw *parent; -+ long best_rate = LONG_MIN, best_diff = LONG_MIN; -+ u32 pres; -+ int i; -+ -+ if (master->chg_pid < 0) -+ return -EOPNOTSUPP; -+ -+ parent = clk_hw_get_parent_by_index(hw, master->chg_pid); -+ if (!parent) -+ return -EOPNOTSUPP; -+ -+ for (i = 0; i <= MASTER_PRES_MAX; i++) { -+ if (characteristics->have_div3_pres && i == MASTER_PRES_MAX) -+ pres = 3; -+ else -+ pres = 1 << i; -+ -+ req_parent.rate = req->rate * pres; -+ if (__clk_determine_rate(parent, &req_parent)) -+ continue; -+ -+ clk_sama7g5_master_best_diff(req, parent, req_parent.rate, -+ &best_diff, &best_rate, pres); -+ if (!best_diff) -+ break; -+ } -+ -+ return 0; -+} -+ -+static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; -+ unsigned int pres; -+ -+ pres = DIV_ROUND_CLOSEST(parent_rate, rate); -+ if (pres > MASTER_PRES_MAX) -+ return -EINVAL; -+ -+ else if (pres == 3) -+ pres = MASTER_PRES_MAX; -+ else -+ pres = ffs(pres) - 1; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_update_bits(master->regmap, master->layout->offset, -+ (MASTER_PRES_MASK << master->layout->pres_shift), -+ (pres << master->layout->pres_shift)); -+ -+ while (!clk_master_ready(master)) -+ cpu_relax(); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ return 0; -+} -+ -+static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ const struct clk_master_characteristics *characteristics = -+ master->characteristics; -+ unsigned long flags; -+ unsigned int val, pres; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_read(master->regmap, master->layout->offset, &val); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; -+ if (pres == 3 && characteristics->have_div3_pres) -+ pres = 3; -+ else -+ pres = (1 << pres); -+ -+ return DIV_ROUND_CLOSEST_ULL(parent_rate, pres); -+} -+ -+static u8 clk_master_pres_get_parent(struct clk_hw *hw) - { - struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; - unsigned int mckr; - -+ spin_lock_irqsave(master->lock, flags); - regmap_read(master->regmap, master->layout->offset, &mckr); -+ spin_unlock_irqrestore(master->lock, flags); - - return mckr & AT91_PMC_CSS; - } - --static const struct clk_ops master_ops = { -+static const struct clk_ops master_pres_ops = { - .prepare = clk_master_prepare, - .is_prepared = clk_master_is_prepared, -- .recalc_rate = clk_master_recalc_rate, -- .get_parent = clk_master_get_parent, -+ .recalc_rate = clk_master_pres_recalc_rate, -+ .get_parent = clk_master_pres_get_parent, - }; - --struct clk_hw * __init --at91_clk_register_master(struct regmap *regmap, -+static const struct clk_ops master_pres_ops_chg = { -+ .prepare = clk_master_prepare, -+ .is_prepared = clk_master_is_prepared, -+ .determine_rate = clk_master_pres_determine_rate, -+ .recalc_rate = clk_master_pres_recalc_rate, -+ .get_parent = clk_master_pres_get_parent, -+ .set_rate = clk_master_pres_set_rate, -+}; -+ -+static struct clk_hw * __init -+at91_clk_register_master_internal(struct regmap *regmap, - const char *name, int num_parents, - const char **parent_names, - const struct clk_master_layout *layout, -- const struct clk_master_characteristics *characteristics) -+ const struct clk_master_characteristics *characteristics, -+ const struct clk_ops *ops, spinlock_t *lock, u32 flags, -+ int chg_pid) - { - struct clk_master *master; - struct clk_init_data init; - struct clk_hw *hw; - int ret; - -- if (!name || !num_parents || !parent_names) -+ if (!name || !num_parents || !parent_names || !lock) - return ERR_PTR(-EINVAL); - - master = kzalloc(sizeof(*master), GFP_KERNEL); -@@ -142,15 +368,17 @@ at91_clk_register_master(struct regmap * - return ERR_PTR(-ENOMEM); - - init.name = name; -- init.ops = &master_ops; -+ init.ops = ops; - init.parent_names = parent_names; - init.num_parents = num_parents; -- init.flags = 0; -+ init.flags = flags; - - master->hw.init = &init; - master->layout = layout; - master->characteristics = characteristics; - master->regmap = regmap; -+ master->chg_pid = chg_pid; -+ master->lock = lock; - - hw = &master->hw; - ret = clk_hw_register(NULL, &master->hw); -@@ -162,37 +390,54 @@ at91_clk_register_master(struct regmap * - return hw; - } - --static unsigned long --clk_sama7g5_master_recalc_rate(struct clk_hw *hw, -- unsigned long parent_rate) -+struct clk_hw * __init -+at91_clk_register_master_pres(struct regmap *regmap, -+ const char *name, int num_parents, -+ const char **parent_names, -+ const struct clk_master_layout *layout, -+ const struct clk_master_characteristics *characteristics, -+ spinlock_t *lock, u32 flags, int chg_pid) - { -- struct clk_master *master = to_clk_master(hw); -+ const struct clk_ops *ops; - -- return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div)); -+ if (flags & CLK_SET_RATE_GATE) -+ ops = &master_pres_ops; -+ else -+ ops = &master_pres_ops_chg; -+ -+ return at91_clk_register_master_internal(regmap, name, num_parents, -+ parent_names, layout, -+ characteristics, ops, -+ lock, flags, chg_pid); - } - --static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, -- struct clk_hw *parent, -- unsigned long parent_rate, -- long *best_rate, -- long *best_diff, -- u32 div) -+struct clk_hw * __init -+at91_clk_register_master_div(struct regmap *regmap, -+ const char *name, const char *parent_name, -+ const struct clk_master_layout *layout, -+ const struct clk_master_characteristics *characteristics, -+ spinlock_t *lock, u32 flags) - { -- unsigned long tmp_rate, tmp_diff; -+ const struct clk_ops *ops; - -- if (div == MASTER_PRES_MAX) -- tmp_rate = parent_rate / 3; -+ if (flags & CLK_SET_RATE_GATE) -+ ops = &master_div_ops; - else -- tmp_rate = parent_rate >> div; -+ ops = &master_div_ops_chg; - -- tmp_diff = abs(req->rate - tmp_rate); -+ return at91_clk_register_master_internal(regmap, name, 1, -+ &parent_name, layout, -+ characteristics, ops, -+ lock, flags, -EINVAL); -+} - -- if (*best_diff < 0 || *best_diff >= tmp_diff) { -- *best_rate = tmp_rate; -- *best_diff = tmp_diff; -- req->best_parent_rate = parent_rate; -- req->best_parent_hw = parent; -- } -+static unsigned long -+clk_sama7g5_master_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ -+ return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div)); - } - - static int clk_sama7g5_master_determine_rate(struct clk_hw *hw, ---- a/drivers/clk/at91/dt-compat.c -+++ b/drivers/clk/at91/dt-compat.c -@@ -24,6 +24,8 @@ - - #define GCK_INDEX_DT_AUDIO_PLL 5 - -+static DEFINE_SPINLOCK(mck_lock); -+ - #ifdef CONFIG_HAVE_AT91_AUDIO_PLL - static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np) - { -@@ -388,9 +390,16 @@ of_at91_clk_master_setup(struct device_n - if (IS_ERR(regmap)) - return; - -- hw = at91_clk_register_master(regmap, name, num_parents, -- parent_names, layout, -- characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", num_parents, -+ parent_names, layout, -+ characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto out_free_characteristics; -+ -+ hw = at91_clk_register_master_div(regmap, name, "masterck_pres", -+ layout, characteristics, -+ &mck_lock, CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto out_free_characteristics; - ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -155,10 +155,18 @@ at91_clk_register_sam9x5_main(struct reg - const char **parent_names, int num_parents); - - struct clk_hw * __init --at91_clk_register_master(struct regmap *regmap, const char *name, -- int num_parents, const char **parent_names, -- const struct clk_master_layout *layout, -- const struct clk_master_characteristics *characteristics); -+at91_clk_register_master_pres(struct regmap *regmap, const char *name, -+ int num_parents, const char **parent_names, -+ const struct clk_master_layout *layout, -+ const struct clk_master_characteristics *characteristics, -+ spinlock_t *lock, u32 flags, int chg_pid); -+ -+struct clk_hw * __init -+at91_clk_register_master_div(struct regmap *regmap, const char *name, -+ const char *parent_names, -+ const struct clk_master_layout *layout, -+ const struct clk_master_characteristics *characteristics, -+ spinlock_t *lock, u32 flags); - - struct clk_hw * __init - at91_clk_sama7g5_register_master(struct regmap *regmap, ---- a/drivers/clk/at91/sam9x60.c -+++ b/drivers/clk/at91/sam9x60.c -@@ -8,6 +8,7 @@ - #include "pmc.h" - - static DEFINE_SPINLOCK(pmc_pll_lock); -+static DEFINE_SPINLOCK(mck_lock); - - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 140000000, .max = 200000000 }, -@@ -76,11 +77,11 @@ static const struct { - char *p; - u8 id; - } sam9x60_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, - { .n = "uhpck", .p = "usbck", .id = 6 }, - { .n = "pck0", .p = "prog0", .id = 8 }, - { .n = "pck1", .p = "prog1", .id = 9 }, -- { .n = "qspick", .p = "masterck", .id = 19 }, -+ { .n = "qspick", .p = "masterck_div", .id = 19 }, - }; - - static const struct { -@@ -268,9 +269,17 @@ static void __init sam9x60_pmc_setup(str - parent_names[0] = md_slck_name; - parent_names[1] = "mainck"; - parent_names[2] = "pllack_divck"; -- hw = at91_clk_register_master(regmap, "masterck", 3, parent_names, -- &sam9x60_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 3, -+ parent_names, &sam9x60_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", &sam9x60_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -286,7 +295,7 @@ static void __init sam9x60_pmc_setup(str - parent_names[0] = md_slck_name; - parent_names[1] = td_slck_name; - parent_names[2] = "mainck"; -- parent_names[3] = "masterck"; -+ parent_names[3] = "masterck_div"; - parent_names[4] = "pllack_divck"; - parent_names[5] = "upllck_divck"; - for (i = 0; i < 2; i++) { -@@ -318,7 +327,7 @@ static void __init sam9x60_pmc_setup(str - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &sam9x60_pcr_layout, - sam9x60_periphck[i].n, -- "masterck", -+ "masterck_div", - sam9x60_periphck[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) ---- a/drivers/clk/at91/sama5d2.c -+++ b/drivers/clk/at91/sama5d2.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 124000000, .max = 166000000 }, - .divisors = { 1, 2, 4, 3 }, -@@ -40,14 +42,14 @@ static const struct { - char *p; - u8 id; - } sama5d2_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -- { .n = "lcdck", .p = "masterck", .id = 3 }, -- { .n = "uhpck", .p = "usbck", .id = 6 }, -- { .n = "udpck", .p = "usbck", .id = 7 }, -- { .n = "pck0", .p = "prog0", .id = 8 }, -- { .n = "pck1", .p = "prog1", .id = 9 }, -- { .n = "pck2", .p = "prog2", .id = 10 }, -- { .n = "iscck", .p = "masterck", .id = 18 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, -+ { .n = "lcdck", .p = "masterck_div", .id = 3 }, -+ { .n = "uhpck", .p = "usbck", .id = 6 }, -+ { .n = "udpck", .p = "usbck", .id = 7 }, -+ { .n = "pck0", .p = "prog0", .id = 8 }, -+ { .n = "pck1", .p = "prog1", .id = 9 }, -+ { .n = "pck2", .p = "prog2", .id = 10 }, -+ { .n = "iscck", .p = "masterck_div", .id = 18 }, - }; - - static const struct { -@@ -235,15 +237,25 @@ static void __init sama5d2_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91sam9x5_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - - sama5d2_pmc->chws[PMC_MCK] = hw; - -- hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck"); -+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div"); - if (IS_ERR(hw)) - goto err_free; - -@@ -259,7 +271,7 @@ static void __init sama5d2_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - parent_names[5] = "audiopll_pmcck"; - for (i = 0; i < 3; i++) { - char name[6]; -@@ -290,7 +302,7 @@ static void __init sama5d2_pmc_setup(str - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &sama5d2_pcr_layout, - sama5d2_periphck[i].n, -- "masterck", -+ "masterck_div", - sama5d2_periphck[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) -@@ -317,7 +329,7 @@ static void __init sama5d2_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - parent_names[5] = "audiopll_pmcck"; - for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) { - hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, ---- a/drivers/clk/at91/sama5d3.c -+++ b/drivers/clk/at91/sama5d3.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 0, .max = 166000000 }, - .divisors = { 1, 2, 4, 3 }, -@@ -40,14 +42,14 @@ static const struct { - char *p; - u8 id; - } sama5d3_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -- { .n = "lcdck", .p = "masterck", .id = 3 }, -- { .n = "smdck", .p = "smdclk", .id = 4 }, -- { .n = "uhpck", .p = "usbck", .id = 6 }, -- { .n = "udpck", .p = "usbck", .id = 7 }, -- { .n = "pck0", .p = "prog0", .id = 8 }, -- { .n = "pck1", .p = "prog1", .id = 9 }, -- { .n = "pck2", .p = "prog2", .id = 10 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, -+ { .n = "lcdck", .p = "masterck_div", .id = 3 }, -+ { .n = "smdck", .p = "smdclk", .id = 4 }, -+ { .n = "uhpck", .p = "usbck", .id = 6 }, -+ { .n = "udpck", .p = "usbck", .id = 7 }, -+ { .n = "pck0", .p = "prog0", .id = 8 }, -+ { .n = "pck1", .p = "prog1", .id = 9 }, -+ { .n = "pck2", .p = "prog2", .id = 10 }, - }; - - static const struct { -@@ -170,9 +172,19 @@ static void __init sama5d3_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91sam9x5_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - -@@ -192,7 +204,7 @@ static void __init sama5d3_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 3; i++) { - char name[6]; - -@@ -222,7 +234,7 @@ static void __init sama5d3_pmc_setup(str - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &sama5d3_pcr_layout, - sama5d3_periphck[i].n, -- "masterck", -+ "masterck_div", - sama5d3_periphck[i].id, - &sama5d3_periphck[i].r, - INT_MIN); ---- a/drivers/clk/at91/sama5d4.c -+++ b/drivers/clk/at91/sama5d4.c -@@ -7,6 +7,8 @@ - - #include "pmc.h" - -+static DEFINE_SPINLOCK(mck_lock); -+ - static const struct clk_master_characteristics mck_characteristics = { - .output = { .min = 125000000, .max = 200000000 }, - .divisors = { 1, 2, 4, 3 }, -@@ -39,14 +41,14 @@ static const struct { - char *p; - u8 id; - } sama5d4_systemck[] = { -- { .n = "ddrck", .p = "masterck", .id = 2 }, -- { .n = "lcdck", .p = "masterck", .id = 3 }, -- { .n = "smdck", .p = "smdclk", .id = 4 }, -- { .n = "uhpck", .p = "usbck", .id = 6 }, -- { .n = "udpck", .p = "usbck", .id = 7 }, -- { .n = "pck0", .p = "prog0", .id = 8 }, -- { .n = "pck1", .p = "prog1", .id = 9 }, -- { .n = "pck2", .p = "prog2", .id = 10 }, -+ { .n = "ddrck", .p = "masterck_div", .id = 2 }, -+ { .n = "lcdck", .p = "masterck_div", .id = 3 }, -+ { .n = "smdck", .p = "smdclk", .id = 4 }, -+ { .n = "uhpck", .p = "usbck", .id = 6 }, -+ { .n = "udpck", .p = "usbck", .id = 7 }, -+ { .n = "pck0", .p = "prog0", .id = 8 }, -+ { .n = "pck1", .p = "prog1", .id = 9 }, -+ { .n = "pck2", .p = "prog2", .id = 10 }, - }; - - static const struct { -@@ -185,15 +187,25 @@ static void __init sama5d4_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names, -- &at91sam9x5_master_layout, -- &mck_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, -+ parent_names, -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE, INT_MIN); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "masterck_div", -+ "masterck_pres", -+ &at91sam9x5_master_layout, -+ &mck_characteristics, &mck_lock, -+ CLK_SET_RATE_GATE); - if (IS_ERR(hw)) - goto err_free; - - sama5d4_pmc->chws[PMC_MCK] = hw; - -- hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck"); -+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div"); - if (IS_ERR(hw)) - goto err_free; - -@@ -215,7 +227,7 @@ static void __init sama5d4_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "plladivck"; - parent_names[3] = "utmick"; -- parent_names[4] = "masterck"; -+ parent_names[4] = "masterck_div"; - for (i = 0; i < 3; i++) { - char name[6]; - -@@ -245,7 +257,7 @@ static void __init sama5d4_pmc_setup(str - hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, - &sama5d4_pcr_layout, - sama5d4_periphck[i].n, -- "masterck", -+ "masterck_div", - sama5d4_periphck[i].id, - &range, INT_MIN); - if (IS_ERR(hw)) ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -32,6 +32,7 @@ - } while (0) - - static DEFINE_SPINLOCK(pmc_pll_lock); -+static DEFINE_SPINLOCK(pmc_mck0_lock); - static DEFINE_SPINLOCK(pmc_mckX_lock); - - /** -@@ -984,8 +985,16 @@ static void __init sama7g5_pmc_setup(str - parent_names[1] = "mainck"; - parent_names[2] = "cpupll_divpmcck"; - parent_names[3] = "syspll_divpmcck"; -- hw = at91_clk_register_master(regmap, "mck0", 4, parent_names, -- &mck0_layout, &mck0_characteristics); -+ hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names, -+ &mck0_layout, &mck0_characteristics, -+ &pmc_mck0_lock, -+ CLK_SET_RATE_PARENT, 0); -+ if (IS_ERR(hw)) -+ goto err_free; -+ -+ hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres", -+ &mck0_layout, &mck0_characteristics, -+ &pmc_mck0_lock, 0); - if (IS_ERR(hw)) - goto err_free; - diff --git a/target/linux/at91/patches-5.15/111-clk-at91-sama7g5-register-cpu-clock.patch b/target/linux/at91/patches-5.15/111-clk-at91-sama7g5-register-cpu-clock.patch deleted file mode 100644 index dc55e32027..0000000000 --- a/target/linux/at91/patches-5.15/111-clk-at91-sama7g5-register-cpu-clock.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 36e97c421dd9f866e31fe14bcb7af01334791890 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 19 Nov 2020 17:43:17 +0200 -Subject: [PATCH 111/247] clk: at91: sama7g5: register cpu clock - -Register CPU clock as being the master clock prescaler. This would -be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider -between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the -frequencies supported by SAMA7G5 could be directly received from -CPUPLL + master clock prescaler and the extra divider would do no work in -case it would be enabled. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 13 ++++++------- - include/dt-bindings/clock/at91.h | 1 + - 2 files changed, 7 insertions(+), 7 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -904,7 +904,7 @@ static void __init sama7g5_pmc_setup(str - if (IS_ERR(regmap)) - return; - -- sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1, -+ sama7g5_pmc = pmc_data_allocate(PMC_CPU + 1, - nck(sama7g5_systemck), - nck(sama7g5_periphck), - nck(sama7g5_gck), 8); -@@ -981,18 +981,17 @@ static void __init sama7g5_pmc_setup(str - } - } - -- parent_names[0] = md_slck_name; -- parent_names[1] = "mainck"; -- parent_names[2] = "cpupll_divpmcck"; -- parent_names[3] = "syspll_divpmcck"; -- hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names, -+ parent_names[0] = "cpupll_divpmcck"; -+ hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names, - &mck0_layout, &mck0_characteristics, - &pmc_mck0_lock, - CLK_SET_RATE_PARENT, 0); - if (IS_ERR(hw)) - goto err_free; - -- hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres", -+ sama7g5_pmc->chws[PMC_CPU] = hw; -+ -+ hw = at91_clk_register_master_div(regmap, "mck0", "cpuck", - &mck0_layout, &mck0_characteristics, - &pmc_mck0_lock, 0); - if (IS_ERR(hw)) ---- a/include/dt-bindings/clock/at91.h -+++ b/include/dt-bindings/clock/at91.h -@@ -34,6 +34,7 @@ - #define PMC_AUDIOPMCPLL (PMC_MAIN + 6) - #define PMC_AUDIOIOPLL (PMC_MAIN + 7) - #define PMC_ETHPLL (PMC_MAIN + 8) -+#define PMC_CPU (PMC_MAIN + 9) - - #ifndef AT91_PMC_MOSCS - #define AT91_PMC_MOSCS 0 /* MOSCS Flag */ diff --git a/target/linux/at91/patches-5.15/112-clk-at91-Fix-the-declaration-of-the-clocks.patch b/target/linux/at91/patches-5.15/112-clk-at91-Fix-the-declaration-of-the-clocks.patch deleted file mode 100644 index e989ed207e..0000000000 --- a/target/linux/at91/patches-5.15/112-clk-at91-Fix-the-declaration-of-the-clocks.patch +++ /dev/null @@ -1,181 +0,0 @@ -From 5a25e2437af0db535b17da352fb16680a8dfdeda Mon Sep 17 00:00:00 2001 -From: Tudor Ambarus -Date: Wed, 3 Feb 2021 17:43:32 +0200 -Subject: [PATCH 112/247] clk: at91: Fix the declaration of the clocks - -These are all "early clocks" that require initialization just at -of_clk_init() time. Use CLK_OF_DECLARE() to declare them. - -This also fixes a problem that was spotted when fw_devlink was -set to 'on' by default: the boards failed to boot. The reason is -that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes -the consumers of the clock to be postponed by fw_devlink until -the second initialization routine of the clock has been completed. -One of the consumers of the clock is the timer, which is used as a -clocksource, and needs the clock initialized early. Postponing the -timers caused the fail at boot. - -Signed-off-by: Tudor Ambarus -Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com -Acked-by: Saravana Kannan -Tested-by: Eugen Hristev -Acked-by: Nicolas Ferre -Reviewed-by: Claudiu Beznea -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/at91rm9200.c | 3 +-- - drivers/clk/at91/at91sam9260.c | 16 ++++++++-------- - drivers/clk/at91/at91sam9g45.c | 3 +-- - drivers/clk/at91/at91sam9n12.c | 3 +-- - drivers/clk/at91/at91sam9rl.c | 3 ++- - drivers/clk/at91/at91sam9x5.c | 20 ++++++++++---------- - drivers/clk/at91/sama5d2.c | 3 ++- - drivers/clk/at91/sama5d3.c | 2 +- - drivers/clk/at91/sama5d4.c | 3 ++- - 9 files changed, 28 insertions(+), 28 deletions(-) - ---- a/drivers/clk/at91/at91rm9200.c -+++ b/drivers/clk/at91/at91rm9200.c -@@ -215,5 +215,4 @@ err_free: - * deferring properly. Once this is fixed, this can be switched to a platform - * driver. - */ --CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc", -- at91rm9200_pmc_setup); -+CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup); ---- a/drivers/clk/at91/at91sam9260.c -+++ b/drivers/clk/at91/at91sam9260.c -@@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup - { - at91sam926x_pmc_setup(np, &at91sam9260_data); - } --CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc", -- at91sam9260_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup); - - static void __init at91sam9261_pmc_setup(struct device_node *np) - { - at91sam926x_pmc_setup(np, &at91sam9261_data); - } --CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc", -- at91sam9261_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup); - - static void __init at91sam9263_pmc_setup(struct device_node *np) - { - at91sam926x_pmc_setup(np, &at91sam9263_data); - } --CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc", -- at91sam9263_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup); - - static void __init at91sam9g20_pmc_setup(struct device_node *np) - { - at91sam926x_pmc_setup(np, &at91sam9g20_data); - } --CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", -- at91sam9g20_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup); ---- a/drivers/clk/at91/at91sam9g45.c -+++ b/drivers/clk/at91/at91sam9g45.c -@@ -228,5 +228,4 @@ err_free: - * The TCB is used as the clocksource so its clock is needed early. This means - * this can't be a platform driver. - */ --CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", -- at91sam9g45_pmc_setup); -+CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup); ---- a/drivers/clk/at91/at91sam9n12.c -+++ b/drivers/clk/at91/at91sam9n12.c -@@ -255,5 +255,4 @@ err_free: - * The TCB is used as the clocksource so its clock is needed early. This means - * this can't be a platform driver. - */ --CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", -- at91sam9n12_pmc_setup); -+CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup); ---- a/drivers/clk/at91/at91sam9rl.c -+++ b/drivers/clk/at91/at91sam9rl.c -@@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup( - err_free: - kfree(at91sam9rl_pmc); - } --CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup); ---- a/drivers/clk/at91/at91sam9x5.c -+++ b/drivers/clk/at91/at91sam9x5.c -@@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup - { - at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true); - } --CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", -- at91sam9g15_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup); - - static void __init at91sam9g25_pmc_setup(struct device_node *np) - { - at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false); - } --CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", -- at91sam9g25_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup); - - static void __init at91sam9g35_pmc_setup(struct device_node *np) - { - at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true); - } --CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", -- at91sam9g35_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup); - - static void __init at91sam9x25_pmc_setup(struct device_node *np) - { - at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false); - } --CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", -- at91sam9x25_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup); - - static void __init at91sam9x35_pmc_setup(struct device_node *np) - { - at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true); - } --CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", -- at91sam9x35_pmc_setup); -+ -+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup); ---- a/drivers/clk/at91/sama5d2.c -+++ b/drivers/clk/at91/sama5d2.c -@@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(str - err_free: - kfree(sama5d2_pmc); - } --CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup); -+ -+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup); ---- a/drivers/clk/at91/sama5d3.c -+++ b/drivers/clk/at91/sama5d3.c -@@ -255,4 +255,4 @@ err_free: - * The TCB is used as the clocksource so its clock is needed early. This means - * this can't be a platform driver. - */ --CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup); -+CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup); ---- a/drivers/clk/at91/sama5d4.c -+++ b/drivers/clk/at91/sama5d4.c -@@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(str - err_free: - kfree(sama5d4_pmc); - } --CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup); -+ -+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup); diff --git a/target/linux/at91/patches-5.15/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch b/target/linux/at91/patches-5.15/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch deleted file mode 100644 index f3ebee10fe..0000000000 --- a/target/linux/at91/patches-5.15/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 268b36c42b7d1e480dd56ecfec626a46f4b5975e Mon Sep 17 00:00:00 2001 -From: Bhaskar Chowdhury -Date: Sat, 13 Mar 2021 11:02:22 +0530 -Subject: [PATCH 113/247] clk: at91: Trivial typo fixes in the file sama7g5.c - -s/critial/critical/ ......two different places -s/parrent/parent/ - -Signed-off-by: Bhaskar Chowdhury -Link: https://lore.kernel.org/r/20210313053222.14706-1-unixbhaskar@gmail.com -Acked-by: Randy Dunlap -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -166,7 +166,7 @@ static const struct { - .c = &pll_characteristics, - .t = PLL_TYPE_FRAC, - /* -- * This feeds syspll_divpmcck which may feed critial parts -+ * This feeds syspll_divpmcck which may feed critical parts - * of the systems like timers. Therefore it should not be - * disabled. - */ -@@ -178,7 +178,7 @@ static const struct { - .c = &pll_characteristics, - .t = PLL_TYPE_DIV, - /* -- * This may feed critial parts of the systems like timers. -+ * This may feed critical parts of the systems like timers. - * Therefore it should not be disabled. - */ - .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, -@@ -455,7 +455,7 @@ static const struct { - * @pp: PLL parents - * @pp_mux_table: PLL parents mux table - * @r: clock output range -- * @pp_chg_id: id in parrent array of changeable PLL parent -+ * @pp_chg_id: id in parent array of changeable PLL parent - * @pp_count: PLL parents count - * @id: clock id - */ diff --git a/target/linux/at91/patches-5.15/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch b/target/linux/at91/patches-5.15/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch deleted file mode 100644 index a9ceda533b..0000000000 --- a/target/linux/at91/patches-5.15/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 9997227090cf529675aeb775585ec9f6c2f0f131 Mon Sep 17 00:00:00 2001 -From: Randy Dunlap -Date: Thu, 19 Aug 2021 15:32:37 -0700 -Subject: [PATCH 114/247] clk: at91: sama7g5: remove all kernel-doc & - kernel-doc warnings - -Remove all "/**" kernel-doc markers from sama7g5.c since they are -all internal to this driver source file only. -This eliminates 14 warnings that were reported by the kernel test robot. - -Signed-off-by: Randy Dunlap -Reported-by: kernel test robot -Cc: Claudiu Beznea -Cc: Michael Turquette -Cc: Stephen Boyd -Cc: Eugen Hristev -Cc: linux-clk@vger.kernel.org -Cc: linux-arm-kernel@lists.infradead.org -Link: https://lore.kernel.org/r/20210819223237.20115-1-rdunlap@infradead.org -Reviewed-by: Claudiu Beznea -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -35,7 +35,7 @@ static DEFINE_SPINLOCK(pmc_pll_lock); - static DEFINE_SPINLOCK(pmc_mck0_lock); - static DEFINE_SPINLOCK(pmc_mckX_lock); - --/** -+/* - * PLL clocks identifiers - * @PLL_ID_CPU: CPU PLL identifier - * @PLL_ID_SYS: System PLL identifier -@@ -56,7 +56,7 @@ enum pll_ids { - PLL_ID_MAX, - }; - --/** -+/* - * PLL type identifiers - * @PLL_TYPE_FRAC: fractional PLL identifier - * @PLL_TYPE_DIV: divider PLL identifier -@@ -118,7 +118,7 @@ static const struct clk_pll_characterist - .output = pll_outputs, - }; - --/** -+/* - * PLL clocks description - * @n: clock name - * @p: clock parent -@@ -285,7 +285,7 @@ static const struct { - }, - }; - --/** -+/* - * Master clock (MCK[1..4]) description - * @n: clock name - * @ep: extra parents names array -@@ -337,7 +337,7 @@ static const struct { - .c = 1, }, - }; - --/** -+/* - * System clock description - * @n: clock name - * @p: clock parent name -@@ -361,7 +361,7 @@ static const struct { - /* Mux table for programmable clocks. */ - static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, }; - --/** -+/* - * Peripheral clock description - * @n: clock name - * @p: clock parent name -@@ -449,7 +449,7 @@ static const struct { - { .n = "uhphs_clk", .p = "mck1", .id = 106, }, - }; - --/** -+/* - * Generic clock description - * @n: clock name - * @pp: PLL parents diff --git a/target/linux/at91/patches-5.15/115-net-macb-add-userio-bits-as-platform-configuration.patch b/target/linux/at91/patches-5.15/115-net-macb-add-userio-bits-as-platform-configuration.patch deleted file mode 100644 index 79e7e62440..0000000000 --- a/target/linux/at91/patches-5.15/115-net-macb-add-userio-bits-as-platform-configuration.patch +++ /dev/null @@ -1,179 +0,0 @@ -From 89f37ac2780d113d3c17d329726c0e92a1400744 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:32 +0200 -Subject: [PATCH 115/247] net: macb: add userio bits as platform configuration - -This is necessary for SAMA7G5 as it uses different values for -PHY interface and also introduces hdfctlen bit. - -Signed-off-by: Claudiu Beznea -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb.h | 10 +++++++++ - drivers/net/ethernet/cadence/macb_main.c | 28 ++++++++++++++++++++---- - 2 files changed, 34 insertions(+), 4 deletions(-) - ---- a/drivers/net/ethernet/cadence/macb.h -+++ b/drivers/net/ethernet/cadence/macb.h -@@ -1104,6 +1104,14 @@ struct macb_pm_data { - u32 usrio; - }; - -+struct macb_usrio_config { -+ u32 mii; -+ u32 rmii; -+ u32 rgmii; -+ u32 refclk; -+ u32 hdfctlen; -+}; -+ - struct macb_config { - u32 caps; - unsigned int dma_burst_length; -@@ -1112,6 +1120,7 @@ struct macb_config { - struct clk **rx_clk, struct clk **tsu_clk); - int (*init)(struct platform_device *pdev); - int jumbo_max_len; -+ const struct macb_usrio_config *usrio; - }; - - struct tsu_incr { -@@ -1244,6 +1253,7 @@ struct macb { - u32 rx_intr_mask; - - struct macb_pm_data pm_data; -+ const struct macb_usrio_config *usrio; - }; - - #ifdef CONFIG_MACB_USE_HWSTAMP ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -3831,15 +3831,15 @@ static int macb_init(struct platform_dev - if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) { - val = 0; - if (phy_interface_mode_is_rgmii(bp->phy_interface)) -- val = GEM_BIT(RGMII); -+ val = bp->usrio->rgmii; - else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII && - (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII)) -- val = MACB_BIT(RMII); -+ val = bp->usrio->rmii; - else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII)) -- val = MACB_BIT(MII); -+ val = bp->usrio->mii; - - if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN) -- val |= MACB_BIT(CLKEN); -+ val |= bp->usrio->refclk; - - macb_or_gem_writel(bp, USRIO, val); - } -@@ -4357,6 +4357,13 @@ static int fu540_c000_init(struct platfo - return macb_init(pdev); - } - -+static const struct macb_usrio_config macb_default_usrio = { -+ .mii = MACB_BIT(MII), -+ .rmii = MACB_BIT(RMII), -+ .rgmii = GEM_BIT(RGMII), -+ .refclk = MACB_BIT(CLKEN), -+}; -+ - static const struct macb_config fu540_c000_config = { - .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO | - MACB_CAPS_GEM_HAS_PTP, -@@ -4364,12 +4371,14 @@ static const struct macb_config fu540_c0 - .clk_init = fu540_c000_clk_init, - .init = fu540_c000_init, - .jumbo_max_len = 10240, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config at91sam9260_config = { - .caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config sama5d3macb_config = { -@@ -4377,6 +4386,7 @@ static const struct macb_config sama5d3m - | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config pc302gem_config = { -@@ -4384,6 +4394,7 @@ static const struct macb_config pc302gem - .dma_burst_length = 16, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config sama5d2_config = { -@@ -4391,6 +4402,7 @@ static const struct macb_config sama5d2_ - .dma_burst_length = 16, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config sama5d3_config = { -@@ -4400,6 +4412,7 @@ static const struct macb_config sama5d3_ - .clk_init = macb_clk_init, - .init = macb_init, - .jumbo_max_len = 10240, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config sama5d4_config = { -@@ -4407,18 +4420,21 @@ static const struct macb_config sama5d4_ - .dma_burst_length = 4, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config emac_config = { - .caps = MACB_CAPS_NEEDS_RSTONUBR | MACB_CAPS_MACB_IS_EMAC, - .clk_init = at91ether_clk_init, - .init = at91ether_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config np4_config = { - .caps = MACB_CAPS_USRIO_DISABLED, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config zynqmp_config = { -@@ -4429,6 +4445,7 @@ static const struct macb_config zynqmp_c - .clk_init = macb_clk_init, - .init = macb_init, - .jumbo_max_len = 10240, -+ .usrio = &macb_default_usrio, - }; - - static const struct macb_config zynq_config = { -@@ -4437,6 +4454,7 @@ static const struct macb_config zynq_con - .dma_burst_length = 16, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - }; - - static const struct of_device_id macb_dt_ids[] = { -@@ -4557,6 +4575,8 @@ static int macb_probe(struct platform_de - bp->wol |= MACB_WOL_HAS_MAGIC_PACKET; - device_set_wakeup_capable(&pdev->dev, bp->wol & MACB_WOL_HAS_MAGIC_PACKET); - -+ bp->usrio = macb_config->usrio; -+ - spin_lock_init(&bp->lock); - - /* setup capabilities */ diff --git a/target/linux/at91/patches-5.15/116-net-macb-add-capability-to-not-set-the-clock-rate.patch b/target/linux/at91/patches-5.15/116-net-macb-add-capability-to-not-set-the-clock-rate.patch deleted file mode 100644 index 87dde7ef60..0000000000 --- a/target/linux/at91/patches-5.15/116-net-macb-add-capability-to-not-set-the-clock-rate.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 1b15259551b701f416aa024050a2e619860bd0d8 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:33 +0200 -Subject: [PATCH 116/247] net: macb: add capability to not set the clock rate - -SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or -by the external clock provided by the PHY. The internal IP logic divides -properly this clock depending on the link speed. The patch adds a new -capability so that macb_set_tx_clock() to not be called for IPs having -this capability (the clock rate, in case of generic clock, is set at the -boot time via device tree and the driver only enables it). - -Signed-off-by: Claudiu Beznea -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb.h | 1 + - drivers/net/ethernet/cadence/macb_main.c | 18 +++++++++--------- - 2 files changed, 10 insertions(+), 9 deletions(-) - ---- a/drivers/net/ethernet/cadence/macb.h -+++ b/drivers/net/ethernet/cadence/macb.h -@@ -658,6 +658,7 @@ - #define MACB_CAPS_GEM_HAS_PTP 0x00000040 - #define MACB_CAPS_BD_RD_PREFETCH 0x00000080 - #define MACB_CAPS_NEEDS_RSTONUBR 0x00000100 -+#define MACB_CAPS_CLK_HW_CHG 0x04000000 - #define MACB_CAPS_MACB_IS_EMAC 0x08000000 - #define MACB_CAPS_FIFO_MODE 0x10000000 - #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -457,15 +457,14 @@ static void macb_init_buffers(struct mac - - /** - * macb_set_tx_clk() - Set a clock to a new frequency -- * @clk: Pointer to the clock to change -+ * @bp: pointer to struct macb - * @speed: New frequency in Hz -- * @dev: Pointer to the struct net_device - */ --static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev) -+static void macb_set_tx_clk(struct macb *bp, int speed) - { - long ferr, rate, rate_rounded; - -- if (!clk) -+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) - return; - - switch (speed) { -@@ -482,7 +481,7 @@ static void macb_set_tx_clk(struct clk * - return; - } - -- rate_rounded = clk_round_rate(clk, rate); -+ rate_rounded = clk_round_rate(bp->tx_clk, rate); - if (rate_rounded < 0) - return; - -@@ -492,11 +491,12 @@ static void macb_set_tx_clk(struct clk * - ferr = abs(rate_rounded - rate); - ferr = DIV_ROUND_UP(ferr, rate / 100000); - if (ferr > 5) -- netdev_warn(dev, "unable to generate target frequency: %ld Hz\n", -+ netdev_warn(bp->dev, -+ "unable to generate target frequency: %ld Hz\n", - rate); - -- if (clk_set_rate(clk, rate_rounded)) -- netdev_err(dev, "adjusting tx_clk failed.\n"); -+ if (clk_set_rate(bp->tx_clk, rate_rounded)) -+ netdev_err(bp->dev, "adjusting tx_clk failed.\n"); - } - - static void macb_validate(struct phylink_config *config, -@@ -649,7 +649,7 @@ static void macb_mac_link_up(struct phyl - if (rx_pause) - ctrl |= MACB_BIT(PAE); - -- macb_set_tx_clk(bp->tx_clk, speed, ndev); -+ macb_set_tx_clk(bp, speed); - - /* Initialize rings & buffers as clearing MACB_BIT(TE) in link down - * cleared the pipeline and control registers. diff --git a/target/linux/at91/patches-5.15/117-net-macb-add-function-to-disable-all-macb-clocks.patch b/target/linux/at91/patches-5.15/117-net-macb-add-function-to-disable-all-macb-clocks.patch deleted file mode 100644 index a474f2a405..0000000000 --- a/target/linux/at91/patches-5.15/117-net-macb-add-function-to-disable-all-macb-clocks.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 935d9aae15ee245a1bc6e322cbef02566a8996cc Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:34 +0200 -Subject: [PATCH 117/247] net: macb: add function to disable all macb clocks - -Add function to disable all macb clocks. - -Signed-off-by: Claudiu Beznea -Suggested-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb_main.c | 38 +++++++++++++----------- - 1 file changed, 21 insertions(+), 17 deletions(-) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -3606,6 +3606,20 @@ static void macb_probe_queues(void __iom - *num_queues = hweight32(*queue_mask); - } - -+static void macb_clks_disable(struct clk *pclk, struct clk *hclk, struct clk *tx_clk, -+ struct clk *rx_clk, struct clk *tsu_clk) -+{ -+ struct clk_bulk_data clks[] = { -+ { .clk = tsu_clk, }, -+ { .clk = rx_clk, }, -+ { .clk = pclk, }, -+ { .clk = hclk, }, -+ { .clk = tx_clk }, -+ }; -+ -+ clk_bulk_disable_unprepare(ARRAY_SIZE(clks), clks); -+} -+ - static int macb_clk_init(struct platform_device *pdev, struct clk **pclk, - struct clk **hclk, struct clk **tx_clk, - struct clk **rx_clk, struct clk **tsu_clk) -@@ -4668,11 +4682,7 @@ err_out_free_netdev: - free_netdev(dev); - - err_disable_clocks: -- clk_disable_unprepare(tx_clk); -- clk_disable_unprepare(hclk); -- clk_disable_unprepare(pclk); -- clk_disable_unprepare(rx_clk); -- clk_disable_unprepare(tsu_clk); -+ macb_clks_disable(pclk, hclk, tx_clk, rx_clk, tsu_clk); - pm_runtime_disable(&pdev->dev); - pm_runtime_set_suspended(&pdev->dev); - pm_runtime_dont_use_autosuspend(&pdev->dev); -@@ -4697,11 +4707,8 @@ static int macb_remove(struct platform_d - pm_runtime_disable(&pdev->dev); - pm_runtime_dont_use_autosuspend(&pdev->dev); - if (!pm_runtime_suspended(&pdev->dev)) { -- clk_disable_unprepare(bp->tx_clk); -- clk_disable_unprepare(bp->hclk); -- clk_disable_unprepare(bp->pclk); -- clk_disable_unprepare(bp->rx_clk); -- clk_disable_unprepare(bp->tsu_clk); -+ macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk, -+ bp->rx_clk, bp->tsu_clk); - pm_runtime_set_suspended(&pdev->dev); - } - phylink_destroy(bp->phylink); -@@ -4880,13 +4887,10 @@ static int __maybe_unused macb_runtime_s - struct net_device *netdev = dev_get_drvdata(dev); - struct macb *bp = netdev_priv(netdev); - -- if (!(device_may_wakeup(dev))) { -- clk_disable_unprepare(bp->tx_clk); -- clk_disable_unprepare(bp->hclk); -- clk_disable_unprepare(bp->pclk); -- clk_disable_unprepare(bp->rx_clk); -- } -- clk_disable_unprepare(bp->tsu_clk); -+ if (!(device_may_wakeup(dev))) -+ macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk, bp->rx_clk, bp->tsu_clk); -+ else -+ macb_clks_disable(NULL, NULL, NULL, NULL, bp->tsu_clk); - - return 0; - } diff --git a/target/linux/at91/patches-5.15/118-net-macb-unprepare-clocks-in-case-of-failure.patch b/target/linux/at91/patches-5.15/118-net-macb-unprepare-clocks-in-case-of-failure.patch deleted file mode 100644 index 7456cc6c52..0000000000 --- a/target/linux/at91/patches-5.15/118-net-macb-unprepare-clocks-in-case-of-failure.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 9692c07ee8bf8f68b74d553d861d092e33264781 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:35 +0200 -Subject: [PATCH 118/247] net: macb: unprepare clocks in case of failure - -Unprepare clocks in case of any failure in fu540_c000_clk_init(). - -Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") -Signed-off-by: Claudiu Beznea -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb_main.c | 24 ++++++++++++++++++------ - 1 file changed, 18 insertions(+), 6 deletions(-) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -4338,8 +4338,10 @@ static int fu540_c000_clk_init(struct pl - return err; - - mgmt = devm_kzalloc(&pdev->dev, sizeof(*mgmt), GFP_KERNEL); -- if (!mgmt) -- return -ENOMEM; -+ if (!mgmt) { -+ err = -ENOMEM; -+ goto err_disable_clks; -+ } - - init.name = "sifive-gemgxl-mgmt"; - init.ops = &fu540_c000_ops; -@@ -4350,16 +4352,26 @@ static int fu540_c000_clk_init(struct pl - mgmt->hw.init = &init; - - *tx_clk = devm_clk_register(&pdev->dev, &mgmt->hw); -- if (IS_ERR(*tx_clk)) -- return PTR_ERR(*tx_clk); -+ if (IS_ERR(*tx_clk)) { -+ err = PTR_ERR(*tx_clk); -+ goto err_disable_clks; -+ } - - err = clk_prepare_enable(*tx_clk); -- if (err) -+ if (err) { - dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err); -- else -+ *tx_clk = NULL; -+ goto err_disable_clks; -+ } else { - dev_info(&pdev->dev, "Registered clk switch '%s'\n", init.name); -+ } - - return 0; -+ -+err_disable_clks: -+ macb_clks_disable(*pclk, *hclk, *tx_clk, *rx_clk, *tsu_clk); -+ -+ return err; - } - - static int fu540_c000_init(struct platform_device *pdev) diff --git a/target/linux/at91/patches-5.15/119-net-macb-add-support-for-sama7g5-gem-interface.patch b/target/linux/at91/patches-5.15/119-net-macb-add-support-for-sama7g5-gem-interface.patch deleted file mode 100644 index 64abd3d6c0..0000000000 --- a/target/linux/at91/patches-5.15/119-net-macb-add-support-for-sama7g5-gem-interface.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 0085cd8576ceeaddeedf973b939b41ba96e3f77c Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:38 +0200 -Subject: [PATCH 119/247] net: macb: add support for sama7g5 gem interface - -Add support for SAMA7G5 gigabit ethernet interface. - -Signed-off-by: Claudiu Beznea -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb_main.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -4390,6 +4390,14 @@ static const struct macb_usrio_config ma - .refclk = MACB_BIT(CLKEN), - }; - -+static const struct macb_usrio_config sama7g5_usrio = { -+ .mii = 0, -+ .rmii = 1, -+ .rgmii = 2, -+ .refclk = BIT(2), -+ .hdfctlen = BIT(6), -+}; -+ - static const struct macb_config fu540_c000_config = { - .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO | - MACB_CAPS_GEM_HAS_PTP, -@@ -4483,6 +4491,14 @@ static const struct macb_config zynq_con - .usrio = &macb_default_usrio, - }; - -+static const struct macb_config sama7g5_gem_config = { -+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG, -+ .dma_burst_length = 16, -+ .clk_init = macb_clk_init, -+ .init = macb_init, -+ .usrio = &sama7g5_usrio, -+}; -+ - static const struct of_device_id macb_dt_ids[] = { - { .compatible = "cdns,at32ap7000-macb" }, - { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, -@@ -4500,6 +4516,7 @@ static const struct of_device_id macb_dt - { .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config}, - { .compatible = "cdns,zynq-gem", .data = &zynq_config }, - { .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config }, -+ { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config }, - { /* sentinel */ } - }; - MODULE_DEVICE_TABLE(of, macb_dt_ids); diff --git a/target/linux/at91/patches-5.15/120-net-macb-add-support-for-sama7g5-emac-interface.patch b/target/linux/at91/patches-5.15/120-net-macb-add-support-for-sama7g5-emac-interface.patch deleted file mode 100644 index 50d31f736b..0000000000 --- a/target/linux/at91/patches-5.15/120-net-macb-add-support-for-sama7g5-emac-interface.patch +++ /dev/null @@ -1,39 +0,0 @@ -From a42f90357cfcfcf5cdade4594ad79a1eae633a9f Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 9 Dec 2020 15:03:39 +0200 -Subject: [PATCH 120/247] net: macb: add support for sama7g5 emac interface - -Add support for SAMA7G5 10/100Mbps interface. - -Signed-off-by: Claudiu Beznea -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb_main.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -4499,6 +4499,14 @@ static const struct macb_config sama7g5_ - .usrio = &sama7g5_usrio, - }; - -+static const struct macb_config sama7g5_emac_config = { -+ .caps = MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII | MACB_CAPS_USRIO_HAS_CLKEN, -+ .dma_burst_length = 16, -+ .clk_init = macb_clk_init, -+ .init = macb_init, -+ .usrio = &sama7g5_usrio, -+}; -+ - static const struct of_device_id macb_dt_ids[] = { - { .compatible = "cdns,at32ap7000-macb" }, - { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, -@@ -4517,6 +4525,7 @@ static const struct of_device_id macb_dt - { .compatible = "cdns,zynq-gem", .data = &zynq_config }, - { .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config }, - { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config }, -+ { .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config }, - { /* sentinel */ } - }; - MODULE_DEVICE_TABLE(of, macb_dt_ids); diff --git a/target/linux/at91/patches-5.15/121-ASoC-pcm5102a-Make-codec-selectable.patch b/target/linux/at91/patches-5.15/121-ASoC-pcm5102a-Make-codec-selectable.patch deleted file mode 100644 index 8c918fd779..0000000000 --- a/target/linux/at91/patches-5.15/121-ASoC-pcm5102a-Make-codec-selectable.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 5ac0e1f5577b266543756521b1a749003b0f3686 Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Mon, 12 Oct 2020 17:19:11 +0300 -Subject: [PATCH 121/247] ASoC: pcm5102a: Make codec selectable - -The TI PCM5102A codec driver can be used with the generic sound card -drivers, so it should be selectable. For example, with the addition -of #sound-dai-cells = <0> property in DT, it can be used with simple/graph -card drivers. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/codecs/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -1007,7 +1007,7 @@ config SND_SOC_PCM3168A_SPI - select REGMAP_SPI - - config SND_SOC_PCM5102A -- tristate -+ tristate "Texas Instruments PCM5102A CODEC" - - config SND_SOC_PCM512x - tristate diff --git a/target/linux/at91/patches-5.15/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch b/target/linux/at91/patches-5.15/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch deleted file mode 100644 index 978b68184e..0000000000 --- a/target/linux/at91/patches-5.15/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f4389949bf422fe04775c17b833100fa0e95ea68 Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Tue, 3 Nov 2020 12:05:54 +0200 -Subject: [PATCH 122/247] ASoC: atmel-i2s: do not warn if muxclk is missing - -Besides the fact that muxclk is optional, muxclk can be set using -assigned-clocks, removing the need to set it in driver. The warning is -thus unneeded, so we can transform it in a debug print, eventually to just -reflect that muxclk was not set by the driver. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/atmel-i2s.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/sound/soc/atmel/atmel-i2s.c -+++ b/sound/soc/atmel/atmel-i2s.c -@@ -581,8 +581,8 @@ static int atmel_i2s_sama5d2_mck_init(st - err = PTR_ERR(muxclk); - if (err == -EPROBE_DEFER) - return -EPROBE_DEFER; -- dev_warn(dev->dev, -- "failed to get the I2S clock control: %d\n", err); -+ dev_dbg(dev->dev, -+ "failed to get the I2S clock control: %d\n", err); - return 0; - } - diff --git a/target/linux/at91/patches-5.15/123-regulator-mcp16502-add-linear_min_sel.patch b/target/linux/at91/patches-5.15/123-regulator-mcp16502-add-linear_min_sel.patch deleted file mode 100644 index ce97be4b77..0000000000 --- a/target/linux/at91/patches-5.15/123-regulator-mcp16502-add-linear_min_sel.patch +++ /dev/null @@ -1,25 +0,0 @@ -From f5a73f3bb600b96b6149f2115360e1d0d51fbac4 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 17:21:07 +0200 -Subject: [PATCH 123/247] regulator: mcp16502: add linear_min_sel - -Selectors b/w zero and VDD_LOW_SEL are not valid. Use linear_min_sel. - -Fixes: 919261c03e7ca ("regulator: mcp16502: add regulator driver for MCP16502") -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605280870-32432-4-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/mcp16502.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/regulator/mcp16502.c -+++ b/drivers/regulator/mcp16502.c -@@ -93,6 +93,7 @@ static unsigned int mcp16502_of_map_mode - .owner = THIS_MODULE, \ - .n_voltages = MCP16502_VSEL + 1, \ - .linear_ranges = _ranges, \ -+ .linear_min_sel = VDD_LOW_SEL, \ - .n_linear_ranges = ARRAY_SIZE(_ranges), \ - .of_match = of_match_ptr(_name), \ - .of_map_mode = mcp16502_of_map_mode, \ diff --git a/target/linux/at91/patches-5.15/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch b/target/linux/at91/patches-5.15/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch deleted file mode 100644 index f371266c78..0000000000 --- a/target/linux/at91/patches-5.15/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 5295f4c122258a11fb6012b7e043248e681db5a2 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 17:21:08 +0200 -Subject: [PATCH 124/247] regulator: mcp16502: adapt for get/set on other - registers - -MCP16502 have multiple registers for each regulator (as described -in enum mcp16502_reg). Adapt the code to be able to get/set all these -registers. This is necessary for the following commits. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605280870-32432-5-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/mcp16502.c | 43 ++++++++++++++++++++++-------------- - 1 file changed, 27 insertions(+), 16 deletions(-) - ---- a/drivers/regulator/mcp16502.c -+++ b/drivers/regulator/mcp16502.c -@@ -54,13 +54,9 @@ - * This function is useful for iterating over all regulators and accessing their - * registers in a generic way or accessing a regulator device by its id. - */ --#define MCP16502_BASE(i) (((i) + 1) << 4) -+#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r) - #define MCP16502_STAT_BASE(i) ((i) + 5) - --#define MCP16502_OFFSET_MODE_A 0 --#define MCP16502_OFFSET_MODE_LPM 1 --#define MCP16502_OFFSET_MODE_HIB 2 -- - #define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL - #define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE - #define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY -@@ -75,6 +71,23 @@ - #define MCP16502_MIN_REG 0x0 - #define MCP16502_MAX_REG 0x65 - -+/** -+ * enum mcp16502_reg - MCP16502 regulators's registers -+ * @MCP16502_REG_A: active state register -+ * @MCP16502_REG_LPM: low power mode state register -+ * @MCP16502_REG_HIB: hibernate state register -+ * @MCP16502_REG_SEQ: startup sequence register -+ * @MCP16502_REG_CFG: configuration register -+ */ -+enum mcp16502_reg { -+ MCP16502_REG_A, -+ MCP16502_REG_LPM, -+ MCP16502_REG_HIB, -+ MCP16502_REG_HPM, -+ MCP16502_REG_SEQ, -+ MCP16502_REG_CFG, -+}; -+ - static unsigned int mcp16502_of_map_mode(unsigned int mode) - { - if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE) -@@ -144,22 +157,20 @@ static void mcp16502_gpio_set_mode(struc - } - - /* -- * mcp16502_get_reg() - get the PMIC's configuration register for opmode -+ * mcp16502_get_reg() - get the PMIC's state configuration register for opmode - * - * @rdev: the regulator whose register we are searching - * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate - */ --static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode) -+static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode) - { -- int reg = MCP16502_BASE(rdev_get_id(rdev)); -- - switch (opmode) { - case MCP16502_OPMODE_ACTIVE: -- return reg + MCP16502_OFFSET_MODE_A; -+ return MCP16502_REG_BASE(rdev_get_id(rdev), A); - case MCP16502_OPMODE_LPM: -- return reg + MCP16502_OFFSET_MODE_LPM; -+ return MCP16502_REG_BASE(rdev_get_id(rdev), LPM); - case MCP16502_OPMODE_HIB: -- return reg + MCP16502_OFFSET_MODE_HIB; -+ return MCP16502_REG_BASE(rdev_get_id(rdev), HIB); - default: - return -EINVAL; - } -@@ -179,7 +190,7 @@ static unsigned int mcp16502_get_mode(st - unsigned int val; - int ret, reg; - -- reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE); -+ reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE); - if (reg < 0) - return reg; - -@@ -210,7 +221,7 @@ static int _mcp16502_set_mode(struct reg - int val; - int reg; - -- reg = mcp16502_get_reg(rdev, op_mode); -+ reg = mcp16502_get_state_reg(rdev, op_mode); - if (reg < 0) - return reg; - -@@ -269,10 +280,10 @@ static int mcp16502_suspend_get_target_r - { - switch (pm_suspend_target_state) { - case PM_SUSPEND_STANDBY: -- return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM); -+ return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM); - case PM_SUSPEND_ON: - case PM_SUSPEND_MEM: -- return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB); -+ return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB); - default: - dev_err(&rdev->dev, "invalid suspend target: %d\n", - pm_suspend_target_state); diff --git a/target/linux/at91/patches-5.15/125-regulator-mcp16502-add-support-for-ramp-delay.patch b/target/linux/at91/patches-5.15/125-regulator-mcp16502-add-support-for-ramp-delay.patch deleted file mode 100644 index c91dd4a18b..0000000000 --- a/target/linux/at91/patches-5.15/125-regulator-mcp16502-add-support-for-ramp-delay.patch +++ /dev/null @@ -1,141 +0,0 @@ -From 7f13433e11a3c88f1fd6417c4c5e5a6c98370b9a Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 17:21:09 +0200 -Subject: [PATCH 125/247] regulator: mcp16502: add support for ramp delay - -MCP16502 have configurable ramp delay support (via DVSR bits in -regulators' CFG register). - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605280870-32432-6-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/mcp16502.c | 89 +++++++++++++++++++++++++++++++++++- - 1 file changed, 87 insertions(+), 2 deletions(-) - ---- a/drivers/regulator/mcp16502.c -+++ b/drivers/regulator/mcp16502.c -@@ -22,8 +22,9 @@ - #define VDD_LOW_SEL 0x0D - #define VDD_HIGH_SEL 0x3F - --#define MCP16502_FLT BIT(7) --#define MCP16502_ENS BIT(0) -+#define MCP16502_FLT BIT(7) -+#define MCP16502_DVSR GENMASK(3, 2) -+#define MCP16502_ENS BIT(0) - - /* - * The PMIC has four sets of registers corresponding to four power modes: -@@ -88,6 +89,12 @@ enum mcp16502_reg { - MCP16502_REG_CFG, - }; - -+/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */ -+static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 }; -+ -+/* Ramp delay (uV/us) for buck2, buck3, buck4. */ -+static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 }; -+ - static unsigned int mcp16502_of_map_mode(unsigned int mode) - { - if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE) -@@ -271,6 +278,80 @@ static int mcp16502_get_status(struct re - return REGULATOR_STATUS_UNDEFINED; - } - -+static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev, -+ unsigned int old_sel, -+ unsigned int new_sel) -+{ -+ static const u8 us_ramp[] = { 8, 16, 24, 32 }; -+ int id = rdev_get_id(rdev); -+ unsigned int uV_delta, val; -+ int ret; -+ -+ ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val); -+ if (ret) -+ return ret; -+ -+ val = (val & MCP16502_DVSR) >> 2; -+ uV_delta = abs(new_sel * rdev->desc->linear_ranges->step - -+ old_sel * rdev->desc->linear_ranges->step); -+ switch (id) { -+ case BUCK1: -+ case LDO1: -+ case LDO2: -+ ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val], -+ mcp16502_ramp_b1l12[val]); -+ break; -+ -+ case BUCK2: -+ case BUCK3: -+ case BUCK4: -+ ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val], -+ mcp16502_ramp_b234[val]); -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ return ret; -+} -+ -+static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) -+{ -+ const int *ramp; -+ int id = rdev_get_id(rdev); -+ unsigned int i, size; -+ -+ switch (id) { -+ case BUCK1: -+ case LDO1: -+ case LDO2: -+ ramp = mcp16502_ramp_b1l12; -+ size = ARRAY_SIZE(mcp16502_ramp_b1l12); -+ break; -+ -+ case BUCK2: -+ case BUCK3: -+ case BUCK4: -+ ramp = mcp16502_ramp_b234; -+ size = ARRAY_SIZE(mcp16502_ramp_b234); -+ break; -+ -+ default: -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < size; i++) { -+ if (ramp[i] == ramp_delay) -+ break; -+ } -+ if (i == size) -+ return -EINVAL; -+ -+ return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG), -+ MCP16502_DVSR, (i << 2)); -+} -+ - #ifdef CONFIG_SUSPEND - /* - * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC -@@ -365,6 +446,8 @@ static const struct regulator_ops mcp165 - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .get_status = mcp16502_get_status, -+ .set_voltage_time_sel = mcp16502_set_voltage_time_sel, -+ .set_ramp_delay = mcp16502_set_ramp_delay, - - .set_mode = mcp16502_set_mode, - .get_mode = mcp16502_get_mode, -@@ -389,6 +472,8 @@ static const struct regulator_ops mcp165 - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .get_status = mcp16502_get_status, -+ .set_voltage_time_sel = mcp16502_set_voltage_time_sel, -+ .set_ramp_delay = mcp16502_set_ramp_delay, - - #ifdef CONFIG_SUSPEND - .set_suspend_voltage = mcp16502_set_suspend_voltage, diff --git a/target/linux/at91/patches-5.15/126-regulator-mcp16502-remove-void-documentation-of-stru.patch b/target/linux/at91/patches-5.15/126-regulator-mcp16502-remove-void-documentation-of-stru.patch deleted file mode 100644 index f570e2805f..0000000000 --- a/target/linux/at91/patches-5.15/126-regulator-mcp16502-remove-void-documentation-of-stru.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 8dcbcb052f682478dcbfa7fc9abdd909e1deab87 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 17:21:10 +0200 -Subject: [PATCH 126/247] regulator: mcp16502: remove void documentation of - struct mcp16502 - -struct mcp16502 has no members called rdev or rmap. Remove the -documentation. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605280870-32432-7-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/mcp16502.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/regulator/mcp16502.c -+++ b/drivers/regulator/mcp16502.c -@@ -135,8 +135,6 @@ enum { - - /* - * struct mcp16502 - PMIC representation -- * @rdev: the regulators belonging to this chip -- * @rmap: regmap to be used for I2C communication - * @lpm: LPM GPIO descriptor - */ - struct mcp16502 { diff --git a/target/linux/at91/patches-5.15/127-regulator-core-validate-selector-against-linear_min_.patch b/target/linux/at91/patches-5.15/127-regulator-core-validate-selector-against-linear_min_.patch deleted file mode 100644 index 14eedb094c..0000000000 --- a/target/linux/at91/patches-5.15/127-regulator-core-validate-selector-against-linear_min_.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 3aee4f22ed0a22d3d6d22fc49812c03d876c7637 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 17:21:05 +0200 -Subject: [PATCH 127/247] regulator: core: validate selector against - linear_min_sel - -There are regulators who's min selector is not zero. Selectors loops -(looping b/w zero and regulator::desc::n_voltages) might throw errors -because invalid selectors are used (lower than -regulator::desc::linear_min_sel). For this situations validate selectors -against regulator::desc::linear_min_sel. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/core.c | 9 +++++++-- - drivers/regulator/helpers.c | 3 ++- - 2 files changed, 9 insertions(+), 3 deletions(-) - ---- a/drivers/regulator/core.c -+++ b/drivers/regulator/core.c -@@ -2992,7 +2992,8 @@ static int _regulator_list_voltage(struc - return rdev->desc->fixed_uV; - - if (ops->list_voltage) { -- if (selector >= rdev->desc->n_voltages) -+ if (selector >= rdev->desc->n_voltages || -+ selector < rdev->desc->linear_min_sel) - return -EINVAL; - if (lock) - regulator_lock(rdev); -@@ -3143,7 +3144,8 @@ int regulator_list_hardware_vsel(struct - struct regulator_dev *rdev = regulator->rdev; - const struct regulator_ops *ops = rdev->desc->ops; - -- if (selector >= rdev->desc->n_voltages) -+ if (selector >= rdev->desc->n_voltages || -+ selector < rdev->desc->linear_min_sel) - return -EINVAL; - if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) - return -EOPNOTSUPP; -@@ -4066,6 +4068,9 @@ int regulator_set_voltage_time(struct re - - for (i = 0; i < rdev->desc->n_voltages; i++) { - /* We only look for exact voltage matches here */ -+ if (i < rdev->desc->linear_min_sel) -+ continue; -+ - voltage = regulator_list_voltage(regulator, i); - if (voltage < 0) - return -EINVAL; ---- a/drivers/regulator/helpers.c -+++ b/drivers/regulator/helpers.c -@@ -647,7 +647,8 @@ int regulator_list_voltage_table(struct - return -EINVAL; - } - -- if (selector >= rdev->desc->n_voltages) -+ if (selector >= rdev->desc->n_voltages || -+ selector < rdev->desc->linear_min_sel) - return -EINVAL; - - return rdev->desc->volt_table[selector]; diff --git a/target/linux/at91/patches-5.15/128-regulator-core-do-not-continue-if-selector-match.patch b/target/linux/at91/patches-5.15/128-regulator-core-do-not-continue-if-selector-match.patch deleted file mode 100644 index 2eed3a0aee..0000000000 --- a/target/linux/at91/patches-5.15/128-regulator-core-do-not-continue-if-selector-match.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 42b56e8bd343f34d5f2a601d8a8a05d8c861c08c Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 13 Nov 2020 19:56:04 +0200 -Subject: [PATCH 128/247] regulator: core: do not continue if selector match - -Do not continue if selector has already been located. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1605290164-11556-1-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/core.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/regulator/core.c -+++ b/drivers/regulator/core.c -@@ -4071,6 +4071,9 @@ int regulator_set_voltage_time(struct re - if (i < rdev->desc->linear_min_sel) - continue; - -+ if (old_sel >= 0 && new_sel >= 0) -+ break; -+ - voltage = regulator_list_voltage(regulator, i); - if (voltage < 0) - return -EINVAL; diff --git a/target/linux/at91/patches-5.15/129-regulator-core-return-zero-for-selectors-lower-than-.patch b/target/linux/at91/patches-5.15/129-regulator-core-return-zero-for-selectors-lower-than-.patch deleted file mode 100644 index 9af0e0f53c..0000000000 --- a/target/linux/at91/patches-5.15/129-regulator-core-return-zero-for-selectors-lower-than-.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 0e933ffc049a0e181b5a6c3af1933976d6959ba9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 25 Nov 2020 19:25:47 +0200 -Subject: [PATCH 129/247] regulator: core: return zero for selectors lower than - linear_min_sel - -Selectors lower than linear_min_sel should not be considered invalid. -Thus return zero in case _regulator_list_voltage(), -regulator_list_hardware_vsel() or regulator_list_voltage_table() -receives such selectors as argument. - -Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel") -Reported-by: Jon Hunter -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1606325147-606-1-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/core.c | 10 ++++++---- - drivers/regulator/helpers.c | 5 +++-- - 2 files changed, 9 insertions(+), 6 deletions(-) - ---- a/drivers/regulator/core.c -+++ b/drivers/regulator/core.c -@@ -2992,9 +2992,10 @@ static int _regulator_list_voltage(struc - return rdev->desc->fixed_uV; - - if (ops->list_voltage) { -- if (selector >= rdev->desc->n_voltages || -- selector < rdev->desc->linear_min_sel) -+ if (selector >= rdev->desc->n_voltages) - return -EINVAL; -+ if (selector < rdev->desc->linear_min_sel) -+ return 0; - if (lock) - regulator_lock(rdev); - ret = ops->list_voltage(rdev, selector); -@@ -3144,9 +3145,10 @@ int regulator_list_hardware_vsel(struct - struct regulator_dev *rdev = regulator->rdev; - const struct regulator_ops *ops = rdev->desc->ops; - -- if (selector >= rdev->desc->n_voltages || -- selector < rdev->desc->linear_min_sel) -+ if (selector >= rdev->desc->n_voltages) - return -EINVAL; -+ if (selector < rdev->desc->linear_min_sel) -+ return 0; - if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) - return -EOPNOTSUPP; - ---- a/drivers/regulator/helpers.c -+++ b/drivers/regulator/helpers.c -@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct - return -EINVAL; - } - -- if (selector >= rdev->desc->n_voltages || -- selector < rdev->desc->linear_min_sel) -+ if (selector >= rdev->desc->n_voltages) - return -EINVAL; -+ if (selector < rdev->desc->linear_min_sel) -+ return 0; - - return rdev->desc->volt_table[selector]; - } diff --git a/target/linux/at91/patches-5.15/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch b/target/linux/at91/patches-5.15/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch deleted file mode 100644 index 12679a20bd..0000000000 --- a/target/linux/at91/patches-5.15/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 763fe72f607d4e929d2c710c88e5c6978dd6ad97 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 7 Jan 2021 16:15:26 +0200 -Subject: [PATCH 130/247] regulator: mcp16502: lpm pin can be optional on some - platforms - -On some platform (e.g. SAMA7G5) LPM pin should be optional as it can -be controlled explicitly (via shutdown controller registers) in the -platform specific power saving code to decrease the power consumption -while suspended as this SoC pin may be connected to other devices that -could take power saving actions based on its value. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Mark Brown ---- - drivers/regulator/mcp16502.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/regulator/mcp16502.c -+++ b/drivers/regulator/mcp16502.c -@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_cli - config.regmap = rmap; - config.driver_data = mcp; - -- mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); -+ mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW); - if (IS_ERR(mcp->lpm)) { - dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm)); - return PTR_ERR(mcp->lpm); diff --git a/target/linux/at91/patches-5.15/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch b/target/linux/at91/patches-5.15/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch deleted file mode 100644 index 78db5a0d32..0000000000 --- a/target/linux/at91/patches-5.15/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 7cb1dad7a7dfe4cfe55ebe86930dd6aef0de66b4 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 13 Nov 2020 15:24:29 +0200 -Subject: [PATCH 131/247] pinctrl: at91-pio4: add support for fewer lines on - last PIO bank - -Some products, like sama7g5, do not have a full last bank of PIO lines. -In this case for example, sama7g5 only has 8 lines for the PE bank. -PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines. -To cope with this situation, added a data attribute that is product dependent, -to specify the number of lines of the last bank. -In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK, -adjust the total number of lines accordingly. -This will avoid advertising 160 lines instead of the actual 136, as this -product supports, and to avoid reading/writing to invalid register addresses. - -Signed-off-by: Eugen Hristev -Acked-by: Ludovic Desroches -Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/pinctrl-at91-pio4.c | 18 ++++++++++++++++-- - 1 file changed, 16 insertions(+), 2 deletions(-) - ---- a/drivers/pinctrl/pinctrl-at91-pio4.c -+++ b/drivers/pinctrl/pinctrl-at91-pio4.c -@@ -71,8 +71,15 @@ - /* Custom pinconf parameters */ - #define ATMEL_PIN_CONFIG_DRIVE_STRENGTH (PIN_CONFIG_END + 1) - -+/** -+ * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct -+ * @nbanks: number of PIO banks -+ * @last_bank_count: number of lines in the last bank (can be less than -+ * the rest of the banks). -+ */ - struct atmel_pioctrl_data { - unsigned nbanks; -+ unsigned last_bank_count; - }; - - struct atmel_group { -@@ -980,11 +987,13 @@ static const struct dev_pm_ops atmel_pct - * We can have up to 16 banks. - */ - static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = { -- .nbanks = 4, -+ .nbanks = 4, -+ .last_bank_count = ATMEL_PIO_NPINS_PER_BANK, - }; - - static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = { -- .nbanks = 5, -+ .nbanks = 5, -+ .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */ - }; - - static const struct of_device_id atmel_pctrl_of_match[] = { -@@ -1025,6 +1034,11 @@ static int atmel_pinctrl_probe(struct pl - atmel_pioctrl_data = match->data; - atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks; - atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK; -+ /* if last bank has limited number of pins, adjust accordingly */ -+ if (atmel_pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) { -+ atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK; -+ atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count; -+ } - - atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(atmel_pioctrl->reg_base)) diff --git a/target/linux/at91/patches-5.15/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch b/target/linux/at91/patches-5.15/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch deleted file mode 100644 index ca1fa8cee5..0000000000 --- a/target/linux/at91/patches-5.15/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 1dccaa4c1e99cd8bd27684a2c87ec806d426c088 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 16 Oct 2020 12:37:25 +0300 -Subject: [PATCH 132/247] dmaengine: at_xdmac: adapt perid for mem2mem - operations - -The PERID in the CC register for mem2mem operations must match an unused -PERID. -The PERID field is 7 bits, but the selected value is 0x3f. -On later products we can have more reserved PERIDs for actual peripherals, -thus this needs to be increased to maximum size. -Changing the value to 0x7f, which is the maximum for 7 bits field. - -Signed-off-by: Eugen Hristev -Reviewed-by: Tudor Ambarus -Link: https://lore.kernel.org/r/20201016093725.289880-1-eugen.hristev@microchip.com -Signed-off-by: Vinod Koul ---- - drivers/dma/at_xdmac.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/dma/at_xdmac.c -+++ b/drivers/dma/at_xdmac.c -@@ -865,7 +865,7 @@ at_xdmac_interleaved_queue_desc(struct d - * match the one of another channel. If not, it could lead to spurious - * flag status. - */ -- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) -+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) - | AT_XDMAC_CC_DIF(0) - | AT_XDMAC_CC_SIF(0) - | AT_XDMAC_CC_MBSIZE_SIXTEEN -@@ -1047,7 +1047,7 @@ at_xdmac_prep_dma_memcpy(struct dma_chan - * match the one of another channel. If not, it could lead to spurious - * flag status. - */ -- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) -+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) - | AT_XDMAC_CC_DAM_INCREMENTED_AM - | AT_XDMAC_CC_SAM_INCREMENTED_AM - | AT_XDMAC_CC_DIF(0) -@@ -1153,7 +1153,7 @@ static struct at_xdmac_desc *at_xdmac_me - * match the one of another channel. If not, it could lead to spurious - * flag status. - */ -- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) -+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) - | AT_XDMAC_CC_DAM_UBS_AM - | AT_XDMAC_CC_SAM_INCREMENTED_AM - | AT_XDMAC_CC_DIF(0) diff --git a/target/linux/at91/patches-5.15/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch b/target/linux/at91/patches-5.15/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch deleted file mode 100644 index 6d338490fb..0000000000 --- a/target/linux/at91/patches-5.15/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch +++ /dev/null @@ -1,280 +0,0 @@ -From 613af756b93fe005d9db11ea26fd0318f239d5a2 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 16 Oct 2020 12:38:50 +0300 -Subject: [PATCH 133/247] dmaengine: at_xdmac: add support for sama7g5 based - at_xdmac - -SAMA7G5 SoC uses a slightly different variant of the AT_XDMAC. -Added support by a new compatible and a layout struct that copes -to the specific version considering the compatible string. -Only the differences in register map are present in the layout struct. -I reworked the register access for this part that has the differences. -Also the Source/Destination Interface bits are no longer valid for this -variant of the XDMAC. Thus, the layout also has a bool for specifying -whether these bits are required or not. - -Signed-off-by: Eugen Hristev -Link: https://lore.kernel.org/r/20201016093850.290053-1-eugen.hristev@microchip.com -Signed-off-by: Vinod Koul ---- - drivers/dma/at_xdmac.c | 110 +++++++++++++++++++++++++++++++---------- - 1 file changed, 84 insertions(+), 26 deletions(-) - ---- a/drivers/dma/at_xdmac.c -+++ b/drivers/dma/at_xdmac.c -@@ -38,13 +38,6 @@ - #define AT_XDMAC_GE 0x1C /* Global Channel Enable Register */ - #define AT_XDMAC_GD 0x20 /* Global Channel Disable Register */ - #define AT_XDMAC_GS 0x24 /* Global Channel Status Register */ --#define AT_XDMAC_GRS 0x28 /* Global Channel Read Suspend Register */ --#define AT_XDMAC_GWS 0x2C /* Global Write Suspend Register */ --#define AT_XDMAC_GRWS 0x30 /* Global Channel Read Write Suspend Register */ --#define AT_XDMAC_GRWR 0x34 /* Global Channel Read Write Resume Register */ --#define AT_XDMAC_GSWR 0x38 /* Global Channel Software Request Register */ --#define AT_XDMAC_GSWS 0x3C /* Global channel Software Request Status Register */ --#define AT_XDMAC_GSWF 0x40 /* Global Channel Software Flush Request Register */ - #define AT_XDMAC_VERSION 0xFFC /* XDMAC Version Register */ - - /* Channel relative registers offsets */ -@@ -151,8 +144,6 @@ - #define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */ - #define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */ - --#define AT_XDMAC_CHAN_REG_BASE 0x50 /* Channel registers base address */ -- - /* Microblock control members */ - #define AT_XDMAC_MBR_UBC_UBLEN_MAX 0xFFFFFFUL /* Maximum Microblock Length */ - #define AT_XDMAC_MBR_UBC_NDE (0x1 << 24) /* Next Descriptor Enable */ -@@ -180,6 +171,27 @@ enum atc_status { - AT_XDMAC_CHAN_IS_PAUSED, - }; - -+struct at_xdmac_layout { -+ /* Global Channel Read Suspend Register */ -+ u8 grs; -+ /* Global Write Suspend Register */ -+ u8 gws; -+ /* Global Channel Read Write Suspend Register */ -+ u8 grws; -+ /* Global Channel Read Write Resume Register */ -+ u8 grwr; -+ /* Global Channel Software Request Register */ -+ u8 gswr; -+ /* Global channel Software Request Status Register */ -+ u8 gsws; -+ /* Global Channel Software Flush Request Register */ -+ u8 gswf; -+ /* Channel reg base */ -+ u8 chan_cc_reg_base; -+ /* Source/Destination Interface must be specified or not */ -+ bool sdif; -+}; -+ - /* ----- Channels ----- */ - struct at_xdmac_chan { - struct dma_chan chan; -@@ -213,6 +225,7 @@ struct at_xdmac { - struct clk *clk; - u32 save_gim; - struct dma_pool *at_xdmac_desc_pool; -+ const struct at_xdmac_layout *layout; - struct at_xdmac_chan chan[]; - }; - -@@ -245,9 +258,33 @@ struct at_xdmac_desc { - struct list_head xfer_node; - } __aligned(sizeof(u64)); - -+static const struct at_xdmac_layout at_xdmac_sama5d4_layout = { -+ .grs = 0x28, -+ .gws = 0x2C, -+ .grws = 0x30, -+ .grwr = 0x34, -+ .gswr = 0x38, -+ .gsws = 0x3C, -+ .gswf = 0x40, -+ .chan_cc_reg_base = 0x50, -+ .sdif = true, -+}; -+ -+static const struct at_xdmac_layout at_xdmac_sama7g5_layout = { -+ .grs = 0x30, -+ .gws = 0x38, -+ .grws = 0x40, -+ .grwr = 0x44, -+ .gswr = 0x48, -+ .gsws = 0x4C, -+ .gswf = 0x50, -+ .chan_cc_reg_base = 0x60, -+ .sdif = false, -+}; -+ - static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) - { -- return atxdmac->regs + (AT_XDMAC_CHAN_REG_BASE + chan_nb * 0x40); -+ return atxdmac->regs + (atxdmac->layout->chan_cc_reg_base + chan_nb * 0x40); - } - - #define at_xdmac_read(atxdmac, reg) readl_relaxed((atxdmac)->regs + (reg)) -@@ -343,8 +380,10 @@ static void at_xdmac_start_xfer(struct a - first->active_xfer = true; - - /* Tell xdmac where to get the first descriptor. */ -- reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys) -- | AT_XDMAC_CNDA_NDAIF(atchan->memif); -+ reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys); -+ if (atxdmac->layout->sdif) -+ reg |= AT_XDMAC_CNDA_NDAIF(atchan->memif); -+ - at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg); - - /* -@@ -539,6 +578,7 @@ static int at_xdmac_compute_chan_conf(st - enum dma_transfer_direction direction) - { - struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); -+ struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); - int csize, dwidth; - - if (direction == DMA_DEV_TO_MEM) { -@@ -546,12 +586,14 @@ static int at_xdmac_compute_chan_conf(st - AT91_XDMAC_DT_PERID(atchan->perid) - | AT_XDMAC_CC_DAM_INCREMENTED_AM - | AT_XDMAC_CC_SAM_FIXED_AM -- | AT_XDMAC_CC_DIF(atchan->memif) -- | AT_XDMAC_CC_SIF(atchan->perif) - | AT_XDMAC_CC_SWREQ_HWR_CONNECTED - | AT_XDMAC_CC_DSYNC_PER2MEM - | AT_XDMAC_CC_MBSIZE_SIXTEEN - | AT_XDMAC_CC_TYPE_PER_TRAN; -+ if (atxdmac->layout->sdif) -+ atchan->cfg |= AT_XDMAC_CC_DIF(atchan->memif) | -+ AT_XDMAC_CC_SIF(atchan->perif); -+ - csize = ffs(atchan->sconfig.src_maxburst) - 1; - if (csize < 0) { - dev_err(chan2dev(chan), "invalid src maxburst value\n"); -@@ -569,12 +611,14 @@ static int at_xdmac_compute_chan_conf(st - AT91_XDMAC_DT_PERID(atchan->perid) - | AT_XDMAC_CC_DAM_FIXED_AM - | AT_XDMAC_CC_SAM_INCREMENTED_AM -- | AT_XDMAC_CC_DIF(atchan->perif) -- | AT_XDMAC_CC_SIF(atchan->memif) - | AT_XDMAC_CC_SWREQ_HWR_CONNECTED - | AT_XDMAC_CC_DSYNC_MEM2PER - | AT_XDMAC_CC_MBSIZE_SIXTEEN - | AT_XDMAC_CC_TYPE_PER_TRAN; -+ if (atxdmac->layout->sdif) -+ atchan->cfg |= AT_XDMAC_CC_DIF(atchan->perif) | -+ AT_XDMAC_CC_SIF(atchan->memif); -+ - csize = ffs(atchan->sconfig.dst_maxburst) - 1; - if (csize < 0) { - dev_err(chan2dev(chan), "invalid src maxburst value\n"); -@@ -864,10 +908,12 @@ at_xdmac_interleaved_queue_desc(struct d - * ERRATA: Even if useless for memory transfers, the PERID has to not - * match the one of another channel. If not, it could lead to spurious - * flag status. -+ * For SAMA7G5x case, the SIF and DIF fields are no longer used. -+ * Thus, no need to have the SIF/DIF interfaces here. -+ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as -+ * zero. - */ - u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) -- | AT_XDMAC_CC_DIF(0) -- | AT_XDMAC_CC_SIF(0) - | AT_XDMAC_CC_MBSIZE_SIXTEEN - | AT_XDMAC_CC_TYPE_MEM_TRAN; - -@@ -1046,12 +1092,14 @@ at_xdmac_prep_dma_memcpy(struct dma_chan - * ERRATA: Even if useless for memory transfers, the PERID has to not - * match the one of another channel. If not, it could lead to spurious - * flag status. -+ * For SAMA7G5x case, the SIF and DIF fields are no longer used. -+ * Thus, no need to have the SIF/DIF interfaces here. -+ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as -+ * zero. - */ - u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) - | AT_XDMAC_CC_DAM_INCREMENTED_AM - | AT_XDMAC_CC_SAM_INCREMENTED_AM -- | AT_XDMAC_CC_DIF(0) -- | AT_XDMAC_CC_SIF(0) - | AT_XDMAC_CC_MBSIZE_SIXTEEN - | AT_XDMAC_CC_TYPE_MEM_TRAN; - unsigned long irqflags; -@@ -1152,12 +1200,14 @@ static struct at_xdmac_desc *at_xdmac_me - * ERRATA: Even if useless for memory transfers, the PERID has to not - * match the one of another channel. If not, it could lead to spurious - * flag status. -+ * For SAMA7G5x case, the SIF and DIF fields are no longer used. -+ * Thus, no need to have the SIF/DIF interfaces here. -+ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as -+ * zero. - */ - u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) - | AT_XDMAC_CC_DAM_UBS_AM - | AT_XDMAC_CC_SAM_INCREMENTED_AM -- | AT_XDMAC_CC_DIF(0) -- | AT_XDMAC_CC_SIF(0) - | AT_XDMAC_CC_MBSIZE_SIXTEEN - | AT_XDMAC_CC_MEMSET_HW_MODE - | AT_XDMAC_CC_TYPE_MEM_TRAN; -@@ -1436,7 +1486,7 @@ at_xdmac_tx_status(struct dma_chan *chan - mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC; - value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM; - if ((desc->lld.mbr_cfg & mask) == value) { -- at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask); -+ at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask); - while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) - cpu_relax(); - } -@@ -1494,7 +1544,7 @@ at_xdmac_tx_status(struct dma_chan *chan - * FIFO flush ensures that data are really written. - */ - if ((desc->lld.mbr_cfg & mask) == value) { -- at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask); -+ at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask); - while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) - cpu_relax(); - } -@@ -1762,7 +1812,7 @@ static int at_xdmac_device_pause(struct - return 0; - - spin_lock_irqsave(&atchan->lock, flags); -- at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask); -+ at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask); - while (at_xdmac_chan_read(atchan, AT_XDMAC_CC) - & (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP)) - cpu_relax(); -@@ -1785,7 +1835,7 @@ static int at_xdmac_device_resume(struct - return 0; - } - -- at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask); -+ at_xdmac_write(atxdmac, atxdmac->layout->grwr, atchan->mask); - clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status); - spin_unlock_irqrestore(&atchan->lock, flags); - -@@ -1992,6 +2042,10 @@ static int at_xdmac_probe(struct platfor - atxdmac->regs = base; - atxdmac->irq = irq; - -+ atxdmac->layout = of_device_get_match_data(&pdev->dev); -+ if (!atxdmac->layout) -+ return -ENODEV; -+ - atxdmac->clk = devm_clk_get(&pdev->dev, "dma_clk"); - if (IS_ERR(atxdmac->clk)) { - dev_err(&pdev->dev, "can't get dma_clk\n"); -@@ -2134,6 +2188,10 @@ static const struct dev_pm_ops atmel_xdm - static const struct of_device_id atmel_xdmac_dt_ids[] = { - { - .compatible = "atmel,sama5d4-dma", -+ .data = &at_xdmac_sama5d4_layout, -+ }, { -+ .compatible = "microchip,sama7g5-dma", -+ .data = &at_xdmac_sama7g5_layout, - }, { - /* sentinel */ - } diff --git a/target/linux/at91/patches-5.15/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch b/target/linux/at91/patches-5.15/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch deleted file mode 100644 index 463d03a35e..0000000000 --- a/target/linux/at91/patches-5.15/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 4833d6ea13a6d2c44a91247991a82c3eb6c1613e Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 16 Oct 2020 12:39:18 +0300 -Subject: [PATCH 134/247] dmaengine: at_xdmac: add AXI priority support and - recommended settings - -The sama7g5 version of the XDMAC supports priority configuration and -outstanding capabilities. -Add defines for the specific registers for this configuration, together -with recommended settings. -However the settings are very different if the XDMAC is a mem2mem or a -per2mem controller. -Thus, we need to differentiate according to device tree property. - -Signed-off-by: Eugen Hristev -Link: https://lore.kernel.org/r/20201016093918.290137-1-eugen.hristev@microchip.com -Signed-off-by: Vinod Koul ---- - drivers/dma/at_xdmac.c | 47 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 47 insertions(+) - ---- a/drivers/dma/at_xdmac.c -+++ b/drivers/dma/at_xdmac.c -@@ -30,7 +30,24 @@ - #define AT_XDMAC_FIFO_SZ(i) (((i) >> 5) & 0x7FF) /* Number of Bytes */ - #define AT_XDMAC_NB_REQ(i) ((((i) >> 16) & 0x3F) + 1) /* Number of Peripheral Requests Minus One */ - #define AT_XDMAC_GCFG 0x04 /* Global Configuration Register */ -+#define AT_XDMAC_WRHP(i) (((i) & 0xF) << 4) -+#define AT_XDMAC_WRMP(i) (((i) & 0xF) << 8) -+#define AT_XDMAC_WRLP(i) (((i) & 0xF) << 12) -+#define AT_XDMAC_RDHP(i) (((i) & 0xF) << 16) -+#define AT_XDMAC_RDMP(i) (((i) & 0xF) << 20) -+#define AT_XDMAC_RDLP(i) (((i) & 0xF) << 24) -+#define AT_XDMAC_RDSG(i) (((i) & 0xF) << 28) -+#define AT_XDMAC_GCFG_M2M (AT_XDMAC_RDLP(0xF) | AT_XDMAC_WRLP(0xF)) -+#define AT_XDMAC_GCFG_P2M (AT_XDMAC_RDSG(0x1) | AT_XDMAC_RDHP(0x3) | \ -+ AT_XDMAC_WRHP(0x5)) - #define AT_XDMAC_GWAC 0x08 /* Global Weighted Arbiter Configuration Register */ -+#define AT_XDMAC_PW0(i) (((i) & 0xF) << 0) -+#define AT_XDMAC_PW1(i) (((i) & 0xF) << 4) -+#define AT_XDMAC_PW2(i) (((i) & 0xF) << 8) -+#define AT_XDMAC_PW3(i) (((i) & 0xF) << 12) -+#define AT_XDMAC_GWAC_M2M 0 -+#define AT_XDMAC_GWAC_P2M (AT_XDMAC_PW0(0xF) | AT_XDMAC_PW2(0xF)) -+ - #define AT_XDMAC_GIE 0x0C /* Global Interrupt Enable Register */ - #define AT_XDMAC_GID 0x10 /* Global Interrupt Disable Register */ - #define AT_XDMAC_GIM 0x14 /* Global Interrupt Mask Register */ -@@ -190,6 +207,8 @@ struct at_xdmac_layout { - u8 chan_cc_reg_base; - /* Source/Destination Interface must be specified or not */ - bool sdif; -+ /* AXI queue priority configuration supported */ -+ bool axi_config; - }; - - /* ----- Channels ----- */ -@@ -268,6 +287,7 @@ static const struct at_xdmac_layout at_x - .gswf = 0x40, - .chan_cc_reg_base = 0x50, - .sdif = true, -+ .axi_config = false, - }; - - static const struct at_xdmac_layout at_xdmac_sama7g5_layout = { -@@ -280,6 +300,7 @@ static const struct at_xdmac_layout at_x - .gswf = 0x50, - .chan_cc_reg_base = 0x60, - .sdif = false, -+ .axi_config = true, - }; - - static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) -@@ -2003,6 +2024,30 @@ static int atmel_xdmac_resume(struct dev - } - #endif /* CONFIG_PM_SLEEP */ - -+static void at_xdmac_axi_config(struct platform_device *pdev) -+{ -+ struct at_xdmac *atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev); -+ bool dev_m2m = false; -+ u32 dma_requests; -+ -+ if (!atxdmac->layout->axi_config) -+ return; /* Not supported */ -+ -+ if (!of_property_read_u32(pdev->dev.of_node, "dma-requests", -+ &dma_requests)) { -+ dev_info(&pdev->dev, "controller in mem2mem mode.\n"); -+ dev_m2m = true; -+ } -+ -+ if (dev_m2m) { -+ at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M); -+ at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M); -+ } else { -+ at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M); -+ at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M); -+ } -+} -+ - static int at_xdmac_probe(struct platform_device *pdev) - { - struct at_xdmac *atxdmac; -@@ -2147,6 +2192,8 @@ static int at_xdmac_probe(struct platfor - dev_info(&pdev->dev, "%d channels, mapped at 0x%p\n", - nr_channels, atxdmac->regs); - -+ at_xdmac_axi_config(pdev); -+ - return 0; - - err_dma_unregister: diff --git a/target/linux/at91/patches-5.15/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch b/target/linux/at91/patches-5.15/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch deleted file mode 100644 index 210d1bd2de..0000000000 --- a/target/linux/at91/patches-5.15/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 982347f757b85ef526afaf243867ddd515475e1b Mon Sep 17 00:00:00 2001 -From: Charles Keepax -Date: Mon, 4 Jan 2021 10:38:02 +0000 -Subject: [PATCH 135/247] net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag - -A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of -macb_set_tx_clk were gated on the presence of this flag. - -- if (!clk) -+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) - -However the flag was not added to anything other than the new -sama7g5_gem, turning that function call into a no op for all other -systems. This breaks the networking on Zynq. - -The commit message adding this states: a new capability so that -macb_set_tx_clock() to not be called for IPs having this -capability - -This strongly implies that present of the flag was intended to skip -the function not absence of the flag. Update the if statement to -this effect, which repairs the existing users. - -Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate") -Suggested-by: Andrew Lunn -Signed-off-by: Charles Keepax -Reviewed-by: Claudiu Beznea -Reviewed-by: Andrew Lunn -Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com -Signed-off-by: Jakub Kicinski ---- - drivers/net/ethernet/cadence/macb_main.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -464,7 +464,7 @@ static void macb_set_tx_clk(struct macb - { - long ferr, rate, rate_rounded; - -- if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) -+ if (!bp->tx_clk || (bp->caps & MACB_CAPS_CLK_HW_CHG)) - return; - - switch (speed) { diff --git a/target/linux/at91/patches-5.15/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch b/target/linux/at91/patches-5.15/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch deleted file mode 100644 index 7c36d0f93a..0000000000 --- a/target/linux/at91/patches-5.15/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch +++ /dev/null @@ -1,43 +0,0 @@ -From a2eda4ef1e3d617cdd669e256e45e969fab62398 Mon Sep 17 00:00:00 2001 -From: Kai Stuhlemmer -Date: Thu, 8 Oct 2020 14:50:28 +0200 -Subject: [PATCH 136/247] ARM: at91: sam9x60 SiP types added to soc description - -Adding SAM9X60 SIP variants to the soc description list. - -Signed-off-by: Kai Stuhlemmer -Signed-off-by: Nicolas Ferre -Signed-off-by: Alexandre Belloni -Link: https://lore.kernel.org/r/20201008125028.21071-1-nicolas.ferre@microchip.com ---- - drivers/soc/atmel/soc.c | 6 ++++++ - drivers/soc/atmel/soc.h | 3 +++ - 2 files changed, 9 insertions(+) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -69,6 +69,12 @@ static const struct at91_soc __initconst - #endif - #ifdef CONFIG_SOC_SAM9X60 - AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"), -+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH, -+ "sam9x60 64MiB DDR2 SiP", "sam9x60"), -+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH, -+ "sam9x60 128MiB DDR2 SiP", "sam9x60"), -+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH, -+ "sam9x60 8MiB SDRAM SiP", "sam9x60"), - #endif - #ifdef CONFIG_SOC_SAMA5 - AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH, ---- a/drivers/soc/atmel/soc.h -+++ b/drivers/soc/atmel/soc.h -@@ -60,6 +60,9 @@ at91_soc_init(const struct at91_soc *soc - #define AT91SAM9CN11_EXID_MATCH 0x00000009 - - #define SAM9X60_EXID_MATCH 0x00000000 -+#define SAM9X60_D5M_EXID_MATCH 0x00000001 -+#define SAM9X60_D1G_EXID_MATCH 0x00000010 -+#define SAM9X60_D6K_EXID_MATCH 0x00000011 - - #define AT91SAM9XE128_CIDR_MATCH 0x329973a0 - #define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 diff --git a/target/linux/at91/patches-5.15/137-drivers-soc-atmel-use-GENMASK.patch b/target/linux/at91/patches-5.15/137-drivers-soc-atmel-use-GENMASK.patch deleted file mode 100644 index de99d562f4..0000000000 --- a/target/linux/at91/patches-5.15/137-drivers-soc-atmel-use-GENMASK.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 8d858d9c57a0210ca1ce9e5ba76fab8bdb4d7b39 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 22 Jan 2021 14:21:32 +0200 -Subject: [PATCH 137/247] drivers: soc: atmel: use GENMASK - -Use GENMASK() to define CIDR match mask. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/1611318097-8970-3-git-send-email-claudiu.beznea@microchip.com ---- - drivers/soc/atmel/soc.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -27,7 +27,7 @@ - #define AT91_CHIPID_EXID 0x04 - #define AT91_CIDR_VERSION(x) ((x) & 0x1f) - #define AT91_CIDR_EXT BIT(31) --#define AT91_CIDR_MATCH_MASK 0x7fffffe0 -+#define AT91_CIDR_MATCH_MASK GENMASK(30, 5) - - static const struct at91_soc __initconst socs[] = { - #ifdef CONFIG_SOC_AT91RM9200 diff --git a/target/linux/at91/patches-5.15/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch b/target/linux/at91/patches-5.15/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch deleted file mode 100644 index 885528a28e..0000000000 --- a/target/linux/at91/patches-5.15/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch +++ /dev/null @@ -1,26 +0,0 @@ -From ed871f95827e9b6d4ee9f9eafec4e18b87fb1a56 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 22 Jan 2021 14:21:33 +0200 -Subject: [PATCH 138/247] drivers: soc: atmel: fix "__initconst should be - placed after socs[]" warning - -Fix checkpatch.pl warning: "__initconst should be placed after socs[]". - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/1611318097-8970-4-git-send-email-claudiu.beznea@microchip.com ---- - drivers/soc/atmel/soc.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -29,7 +29,7 @@ - #define AT91_CIDR_EXT BIT(31) - #define AT91_CIDR_MATCH_MASK GENMASK(30, 5) - --static const struct at91_soc __initconst socs[] = { -+static const struct at91_soc socs[] __initconst = { - #ifdef CONFIG_SOC_AT91RM9200 - AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), - #endif diff --git a/target/linux/at91/patches-5.15/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch b/target/linux/at91/patches-5.15/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch deleted file mode 100644 index 72cdb46f11..0000000000 --- a/target/linux/at91/patches-5.15/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch +++ /dev/null @@ -1,348 +0,0 @@ -From 8f6f7ef363268f417f1729bb0b234326dd1e8e2a Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 22 Jan 2021 14:21:35 +0200 -Subject: [PATCH 139/247] drivers: soc: atmel: add per soc id and version match - masks - -SAMA7G5 has different masks for chip ID and chip version on CIDR -register compared to previous AT91 SoCs. For this the commit adapts -the code for SAMA7G5 addition by introducing 2 new members in -struct at91_soc and fill them properly and also preparing the -parsing of proper DT binding. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/1611318097-8970-6-git-send-email-claudiu.beznea@microchip.com ---- - drivers/soc/atmel/soc.c | 199 +++++++++++++++++++++++++++------------- - drivers/soc/atmel/soc.h | 7 +- - 2 files changed, 140 insertions(+), 66 deletions(-) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -25,135 +25,200 @@ - #define AT91_DBGU_EXID 0x44 - #define AT91_CHIPID_CIDR 0x00 - #define AT91_CHIPID_EXID 0x04 --#define AT91_CIDR_VERSION(x) ((x) & 0x1f) -+#define AT91_CIDR_VERSION(x, m) ((x) & (m)) -+#define AT91_CIDR_VERSION_MASK GENMASK(4, 0) - #define AT91_CIDR_EXT BIT(31) - #define AT91_CIDR_MATCH_MASK GENMASK(30, 5) - - static const struct at91_soc socs[] __initconst = { - #ifdef CONFIG_SOC_AT91RM9200 -- AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), -+ AT91_SOC(AT91RM9200_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91rm9200 BGA", "at91rm9200"), - #endif - #ifdef CONFIG_SOC_AT91SAM9 -- AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL), -- AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL), -- AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL), -- AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL), -- AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL), -- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH, -+ AT91_SOC(AT91SAM9260_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9260", NULL), -+ AT91_SOC(AT91SAM9261_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9261", NULL), -+ AT91_SOC(AT91SAM9263_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9263", NULL), -+ AT91_SOC(AT91SAM9G20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9g20", NULL), -+ AT91_SOC(AT91SAM9RL64_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9rl64", NULL), -+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9M11_EXID_MATCH, - "at91sam9m11", "at91sam9g45"), -- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH, -+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9M10_EXID_MATCH, - "at91sam9m10", "at91sam9g45"), -- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH, -+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9G46_EXID_MATCH, - "at91sam9g46", "at91sam9g45"), -- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH, -+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9G45_EXID_MATCH, - "at91sam9g45", "at91sam9g45"), -- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH, -+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9G15_EXID_MATCH, - "at91sam9g15", "at91sam9x5"), -- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH, -+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9G35_EXID_MATCH, - "at91sam9g35", "at91sam9x5"), -- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH, -+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9X35_EXID_MATCH, - "at91sam9x35", "at91sam9x5"), -- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH, -+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9G25_EXID_MATCH, - "at91sam9g25", "at91sam9x5"), -- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH, -+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9X25_EXID_MATCH, - "at91sam9x25", "at91sam9x5"), -- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH, -+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9CN12_EXID_MATCH, - "at91sam9cn12", "at91sam9n12"), -- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH, -+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9N12_EXID_MATCH, - "at91sam9n12", "at91sam9n12"), -- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH, -+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, AT91SAM9CN11_EXID_MATCH, - "at91sam9cn11", "at91sam9n12"), -- AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"), -- AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"), -- AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"), -+ AT91_SOC(AT91SAM9XE128_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe128", "at91sam9xe128"), -+ AT91_SOC(AT91SAM9XE256_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe256", "at91sam9xe256"), -+ AT91_SOC(AT91SAM9XE512_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe512", "at91sam9xe512"), - #endif - #ifdef CONFIG_SOC_SAM9X60 -- AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"), -+ AT91_SOC(SAM9X60_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH, -+ "sam9x60", "sam9x60"), - AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH, -+ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH, - "sam9x60 64MiB DDR2 SiP", "sam9x60"), - AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH, -+ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH, - "sam9x60 128MiB DDR2 SiP", "sam9x60"), - AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH, -+ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH, - "sam9x60 8MiB SDRAM SiP", "sam9x60"), - #endif - #ifdef CONFIG_SOC_SAMA5 -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D21CU_EXID_MATCH, - "sama5d21", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D22CU_EXID_MATCH, - "sama5d22", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D225C_D1M_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D225C_D1M_EXID_MATCH, - "sama5d225c 16MiB SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D23CU_EXID_MATCH, - "sama5d23", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D24CX_EXID_MATCH, - "sama5d24", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D24CU_EXID_MATCH, - "sama5d24", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D26CU_EXID_MATCH, - "sama5d26", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27CU_EXID_MATCH, - "sama5d27", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27CN_EXID_MATCH, - "sama5d27", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D1G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27C_D1G_EXID_MATCH, - "sama5d27c 128MiB SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D5M_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27C_D5M_EXID_MATCH, - "sama5d27c 64MiB SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD1G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27C_LD1G_EXID_MATCH, - "sama5d27c 128MiB LPDDR2 SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD2G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D27C_LD2G_EXID_MATCH, - "sama5d27c 256MiB LPDDR2 SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D28CU_EXID_MATCH, - "sama5d28", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D28CN_EXID_MATCH, - "sama5d28", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_D1G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D28C_D1G_EXID_MATCH, - "sama5d28c 128MiB SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD1G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D28C_LD1G_EXID_MATCH, - "sama5d28c 128MiB LPDDR2 SiP", "sama5d2"), -- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD2G_EXID_MATCH, -+ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D28C_LD2G_EXID_MATCH, - "sama5d28c 256MiB LPDDR2 SiP", "sama5d2"), -- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH, -+ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D31_EXID_MATCH, - "sama5d31", "sama5d3"), -- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH, -+ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D33_EXID_MATCH, - "sama5d33", "sama5d3"), -- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH, -+ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D34_EXID_MATCH, - "sama5d34", "sama5d3"), -- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH, -+ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D35_EXID_MATCH, - "sama5d35", "sama5d3"), -- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH, -+ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D36_EXID_MATCH, - "sama5d36", "sama5d3"), -- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH, -+ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D41_EXID_MATCH, - "sama5d41", "sama5d4"), -- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH, -+ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D42_EXID_MATCH, - "sama5d42", "sama5d4"), -- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH, -+ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D43_EXID_MATCH, - "sama5d43", "sama5d4"), -- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH, -+ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMA5D44_EXID_MATCH, - "sama5d44", "sama5d4"), - #endif - #ifdef CONFIG_SOC_SAMV7 -- AT91_SOC(SAME70Q21_CIDR_MATCH, SAME70Q21_EXID_MATCH, -+ AT91_SOC(SAME70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAME70Q21_EXID_MATCH, - "same70q21", "same7"), -- AT91_SOC(SAME70Q20_CIDR_MATCH, SAME70Q20_EXID_MATCH, -+ AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH, - "same70q20", "same7"), -- AT91_SOC(SAME70Q19_CIDR_MATCH, SAME70Q19_EXID_MATCH, -+ AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK -+ AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH, - "same70q19", "same7"), -- AT91_SOC(SAMS70Q21_CIDR_MATCH, SAMS70Q21_EXID_MATCH, -+ AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMS70Q21_EXID_MATCH, - "sams70q21", "sams7"), -- AT91_SOC(SAMS70Q20_CIDR_MATCH, SAMS70Q20_EXID_MATCH, -+ AT91_SOC(SAMS70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMS70Q20_EXID_MATCH, - "sams70q20", "sams7"), -- AT91_SOC(SAMS70Q19_CIDR_MATCH, SAMS70Q19_EXID_MATCH, -+ AT91_SOC(SAMS70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMS70Q19_EXID_MATCH, - "sams70q19", "sams7"), -- AT91_SOC(SAMV71Q21_CIDR_MATCH, SAMV71Q21_EXID_MATCH, -+ AT91_SOC(SAMV71Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMV71Q21_EXID_MATCH, - "samv71q21", "samv7"), -- AT91_SOC(SAMV71Q20_CIDR_MATCH, SAMV71Q20_EXID_MATCH, -+ AT91_SOC(SAMV71Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMV71Q20_EXID_MATCH, - "samv71q20", "samv7"), -- AT91_SOC(SAMV71Q19_CIDR_MATCH, SAMV71Q19_EXID_MATCH, -+ AT91_SOC(SAMV71Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMV71Q19_EXID_MATCH, - "samv71q19", "samv7"), -- AT91_SOC(SAMV70Q20_CIDR_MATCH, SAMV70Q20_EXID_MATCH, -+ AT91_SOC(SAMV70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMV70Q20_EXID_MATCH, - "samv70q20", "samv7"), -- AT91_SOC(SAMV70Q19_CIDR_MATCH, SAMV70Q19_EXID_MATCH, -+ AT91_SOC(SAMV70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH, - "samv70q19", "samv7"), - #endif - { /* sentinel */ }, -@@ -191,8 +256,12 @@ static int __init at91_get_cidr_exid_fro - { - struct device_node *np; - void __iomem *regs; -+ static const struct of_device_id chipids[] = { -+ { .compatible = "atmel,sama5d2-chipid" }, -+ { }, -+ }; - -- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid"); -+ np = of_find_matching_node(NULL, chipids); - if (!np) - return -ENODEV; - -@@ -235,7 +304,7 @@ struct soc_device * __init at91_soc_init - } - - for (soc = socs; soc->name; soc++) { -- if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK)) -+ if (soc->cidr_match != (cidr & soc->cidr_mask)) - continue; - - if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid) -@@ -254,7 +323,7 @@ struct soc_device * __init at91_soc_init - soc_dev_attr->family = soc->family; - soc_dev_attr->soc_id = soc->name; - soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", -- AT91_CIDR_VERSION(cidr)); -+ AT91_CIDR_VERSION(cidr, soc->version_mask)); - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->revision); -@@ -266,7 +335,7 @@ struct soc_device * __init at91_soc_init - if (soc->family) - pr_info("Detected SoC family: %s\n", soc->family); - pr_info("Detected SoC: %s, revision %X\n", soc->name, -- AT91_CIDR_VERSION(cidr)); -+ AT91_CIDR_VERSION(cidr, soc->version_mask)); - - return soc_dev; - } ---- a/drivers/soc/atmel/soc.h -+++ b/drivers/soc/atmel/soc.h -@@ -16,14 +16,19 @@ - - struct at91_soc { - u32 cidr_match; -+ u32 cidr_mask; -+ u32 version_mask; - u32 exid_match; - const char *name; - const char *family; - }; - --#define AT91_SOC(__cidr, __exid, __name, __family) \ -+#define AT91_SOC(__cidr, __cidr_mask, __version_mask, __exid, \ -+ __name, __family) \ - { \ - .cidr_match = (__cidr), \ -+ .cidr_mask = (__cidr_mask), \ -+ .version_mask = (__version_mask), \ - .exid_match = (__exid), \ - .name = (__name), \ - .family = (__family), \ diff --git a/target/linux/at91/patches-5.15/140-drivers-soc-atmel-add-support-for-sama7g5.patch b/target/linux/at91/patches-5.15/140-drivers-soc-atmel-add-support-for-sama7g5.patch deleted file mode 100644 index 3b21017673..0000000000 --- a/target/linux/at91/patches-5.15/140-drivers-soc-atmel-add-support-for-sama7g5.patch +++ /dev/null @@ -1,87 +0,0 @@ -From e20bb57fc51741677a6fcae04e564797fd18921b Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Fri, 22 Jan 2021 14:21:37 +0200 -Subject: [PATCH 140/247] drivers: soc: atmel: add support for sama7g5 - -Add support for SAMA7G5 SoCs. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/1611318097-8970-8-git-send-email-claudiu.beznea@microchip.com ---- - drivers/soc/atmel/soc.c | 18 ++++++++++++++++++ - drivers/soc/atmel/soc.h | 6 ++++++ - 2 files changed, 24 insertions(+) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -27,8 +27,10 @@ - #define AT91_CHIPID_EXID 0x04 - #define AT91_CIDR_VERSION(x, m) ((x) & (m)) - #define AT91_CIDR_VERSION_MASK GENMASK(4, 0) -+#define AT91_CIDR_VERSION_MASK_SAMA7G5 GENMASK(3, 0) - #define AT91_CIDR_EXT BIT(31) - #define AT91_CIDR_MATCH_MASK GENMASK(30, 5) -+#define AT91_CIDR_MASK_SAMA7G5 GENMASK(27, 5) - - static const struct at91_soc socs[] __initconst = { - #ifdef CONFIG_SOC_AT91RM9200 -@@ -221,6 +223,20 @@ static const struct at91_soc socs[] __in - AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH, - "samv70q19", "samv7"), - #endif -+#ifdef CONFIG_SOC_SAMA7 -+ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G51_EXID_MATCH, -+ "sama7g51", "sama7g5"), -+ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G52_EXID_MATCH, -+ "sama7g52", "sama7g5"), -+ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G53_EXID_MATCH, -+ "sama7g53", "sama7g5"), -+ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK, -+ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G54_EXID_MATCH, -+ "sama7g54", "sama7g5"), -+#endif - { /* sentinel */ }, - }; - -@@ -258,6 +274,7 @@ static int __init at91_get_cidr_exid_fro - void __iomem *regs; - static const struct of_device_id chipids[] = { - { .compatible = "atmel,sama5d2-chipid" }, -+ { .compatible = "microchip,sama7g5-chipid" }, - { }, - }; - -@@ -345,6 +362,7 @@ static const struct of_device_id at91_so - { .compatible = "atmel,at91sam9", }, - { .compatible = "atmel,sama5", }, - { .compatible = "atmel,samv7", }, -+ { .compatible = "microchip,sama7g5", }, - { } - }; - ---- a/drivers/soc/atmel/soc.h -+++ b/drivers/soc/atmel/soc.h -@@ -48,6 +48,7 @@ at91_soc_init(const struct at91_soc *soc - #define AT91SAM9X5_CIDR_MATCH 0x019a05a0 - #define AT91SAM9N12_CIDR_MATCH 0x019a07a0 - #define SAM9X60_CIDR_MATCH 0x019b35a0 -+#define SAMA7G5_CIDR_MATCH 0x00162100 - - #define AT91SAM9M11_EXID_MATCH 0x00000001 - #define AT91SAM9M10_EXID_MATCH 0x00000002 -@@ -69,6 +70,11 @@ at91_soc_init(const struct at91_soc *soc - #define SAM9X60_D1G_EXID_MATCH 0x00000010 - #define SAM9X60_D6K_EXID_MATCH 0x00000011 - -+#define SAMA7G51_EXID_MATCH 0x3 -+#define SAMA7G52_EXID_MATCH 0x2 -+#define SAMA7G53_EXID_MATCH 0x1 -+#define SAMA7G54_EXID_MATCH 0x0 -+ - #define AT91SAM9XE128_CIDR_MATCH 0x329973a0 - #define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 - #define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0 diff --git a/target/linux/at91/patches-5.15/141-drivers-soc-atmel-add-spdx-license-identifier.patch b/target/linux/at91/patches-5.15/141-drivers-soc-atmel-add-spdx-license-identifier.patch deleted file mode 100644 index be238147d6..0000000000 --- a/target/linux/at91/patches-5.15/141-drivers-soc-atmel-add-spdx-license-identifier.patch +++ /dev/null @@ -1,49 +0,0 @@ -From acd4816cfa7811b13ca2864645f2de41031ccf4d Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Tue, 26 Jan 2021 11:29:30 +0200 -Subject: [PATCH 141/247] drivers: soc: atmel: add spdx license identifier - -Add SPDX-License-Identifier. - -Signed-off-by: Claudiu Beznea -[nicolas.ferre@microhcip.com: remove license boilerplate now it's useless] -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/1611653376-24168-2-git-send-email-claudiu.beznea@microchip.com ---- - drivers/soc/atmel/soc.c | 6 +----- - drivers/soc/atmel/soc.h | 6 +----- - 2 files changed, 2 insertions(+), 10 deletions(-) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -1,13 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-only - /* - * Copyright (C) 2015 Atmel - * - * Alexandre Belloni -Date: Thu, 4 Feb 2021 16:49:25 +0100 -Subject: [PATCH 142/247] drivers: soc: atmel: fix type for same7 - -A missing comma caused a build failure: - -drivers/soc/atmel/soc.c:196:24: error: too few arguments provided to function-like macro invocation - -Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks") -Signed-off-by: Arnd Bergmann -Acked-by: Alexandre Belloni -Signed-off-by: Arnd Bergmann ---- - drivers/soc/atmel/soc.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/soc/atmel/soc.c -+++ b/drivers/soc/atmel/soc.c -@@ -191,7 +191,7 @@ static const struct at91_soc socs[] __in - AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK, - AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH, - "same70q20", "same7"), -- AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK -+ AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK, - AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH, - "same70q19", "same7"), - AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK, diff --git a/target/linux/at91/patches-5.15/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch b/target/linux/at91/patches-5.15/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch deleted file mode 100644 index 7b2462cd00..0000000000 --- a/target/linux/at91/patches-5.15/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 5f090a664d62ceeaf9a0f482426e35cab18d65a9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Tue, 19 Jan 2021 14:59:25 +0200 -Subject: [PATCH 143/247] clocksource/drivers/timer-microchip-pit64b: Add - clocksource suspend/resume - -Add suspend/resume support for clocksource timer. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com ---- - drivers/clocksource/timer-microchip-pit64b.c | 86 ++++++++++++++++---- - 1 file changed, 71 insertions(+), 15 deletions(-) - ---- a/drivers/clocksource/timer-microchip-pit64b.c -+++ b/drivers/clocksource/timer-microchip-pit64b.c -@@ -71,10 +71,24 @@ struct mchp_pit64b_clkevt { - struct clock_event_device clkevt; - }; - --#define to_mchp_pit64b_timer(x) \ -+#define clkevt_to_mchp_pit64b_timer(x) \ - ((struct mchp_pit64b_timer *)container_of(x,\ - struct mchp_pit64b_clkevt, clkevt)) - -+/** -+ * mchp_pit64b_clksrc - PIT64B clocksource data structure -+ * @timer: PIT64B timer -+ * @clksrc: clocksource -+ */ -+struct mchp_pit64b_clksrc { -+ struct mchp_pit64b_timer timer; -+ struct clocksource clksrc; -+}; -+ -+#define clksrc_to_mchp_pit64b_timer(x) \ -+ ((struct mchp_pit64b_timer *)container_of(x,\ -+ struct mchp_pit64b_clksrc, clksrc)) -+ - /* Base address for clocksource timer. */ - static void __iomem *mchp_pit64b_cs_base; - /* Default cycles for clockevent timer. */ -@@ -116,6 +130,36 @@ static inline void mchp_pit64b_reset(str - writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR); - } - -+static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer) -+{ -+ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); -+ if (timer->mode & MCHP_PIT64B_MR_SGCLK) -+ clk_disable_unprepare(timer->gclk); -+ clk_disable_unprepare(timer->pclk); -+} -+ -+static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer) -+{ -+ clk_prepare_enable(timer->pclk); -+ if (timer->mode & MCHP_PIT64B_MR_SGCLK) -+ clk_prepare_enable(timer->gclk); -+} -+ -+static void mchp_pit64b_clksrc_suspend(struct clocksource *cs) -+{ -+ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs); -+ -+ mchp_pit64b_suspend(timer); -+} -+ -+static void mchp_pit64b_clksrc_resume(struct clocksource *cs) -+{ -+ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs); -+ -+ mchp_pit64b_resume(timer); -+ mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0); -+} -+ - static u64 mchp_pit64b_clksrc_read(struct clocksource *cs) - { - return mchp_pit64b_cnt_read(mchp_pit64b_cs_base); -@@ -128,7 +172,7 @@ static u64 notrace mchp_pit64b_sched_rea - - static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev) - { -- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); -+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - - writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); - -@@ -137,7 +181,7 @@ static int mchp_pit64b_clkevt_shutdown(s - - static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev) - { -- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); -+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - - mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT, - MCHP_PIT64B_IER_PERIOD); -@@ -148,7 +192,7 @@ static int mchp_pit64b_clkevt_set_period - static int mchp_pit64b_clkevt_set_next_event(unsigned long evt, - struct clock_event_device *cedev) - { -- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); -+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - - mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT, - MCHP_PIT64B_IER_PERIOD); -@@ -158,21 +202,16 @@ static int mchp_pit64b_clkevt_set_next_e - - static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev) - { -- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); -+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - -- writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); -- if (timer->mode & MCHP_PIT64B_MR_SGCLK) -- clk_disable_unprepare(timer->gclk); -- clk_disable_unprepare(timer->pclk); -+ mchp_pit64b_suspend(timer); - } - - static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev) - { -- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); -+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - -- clk_prepare_enable(timer->pclk); -- if (timer->mode & MCHP_PIT64B_MR_SGCLK) -- clk_prepare_enable(timer->gclk); -+ mchp_pit64b_resume(timer); - } - - static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id) -@@ -296,20 +335,37 @@ done: - static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer, - u32 clk_rate) - { -+ struct mchp_pit64b_clksrc *cs; - int ret; - -+ cs = kzalloc(sizeof(*cs), GFP_KERNEL); -+ if (!cs) -+ return -ENOMEM; -+ - mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0); - - mchp_pit64b_cs_base = timer->base; - -- ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate, -- 210, 64, mchp_pit64b_clksrc_read); -+ cs->timer.base = timer->base; -+ cs->timer.pclk = timer->pclk; -+ cs->timer.gclk = timer->gclk; -+ cs->timer.mode = timer->mode; -+ cs->clksrc.name = MCHP_PIT64B_NAME; -+ cs->clksrc.mask = CLOCKSOURCE_MASK(64); -+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS; -+ cs->clksrc.rating = 210; -+ cs->clksrc.read = mchp_pit64b_clksrc_read; -+ cs->clksrc.suspend = mchp_pit64b_clksrc_suspend; -+ cs->clksrc.resume = mchp_pit64b_clksrc_resume; -+ -+ ret = clocksource_register_hz(&cs->clksrc, clk_rate); - if (ret) { - pr_debug("clksrc: Failed to register PIT64B clocksource!\n"); - - /* Stop timer. */ - writel_relaxed(MCHP_PIT64B_CR_SWRST, - timer->base + MCHP_PIT64B_CR); -+ kfree(cs); - - return ret; - } diff --git a/target/linux/at91/patches-5.15/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch b/target/linux/at91/patches-5.15/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch deleted file mode 100644 index 072e13bcc6..0000000000 --- a/target/linux/at91/patches-5.15/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 0b20c174a17dcfa805ddac1301a5af7298877ec3 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Wed, 6 Jan 2021 14:36:48 +0100 -Subject: [PATCH 144/247] ASoC: atmel-pdc: Use managed DMA buffer allocation - -Instead of manually managing its DMA buffers using -dma_{alloc,free}_coherent() lets the sound core take care of this using -managed buffers. - -On one hand this reduces the amount of boiler plate code, but the main -motivation for the change is to use the shared code where possible. This -makes it easier to argue about correctness and that the code does not -contain subtle bugs like data leakage or similar. - -Signed-off-by: Lars-Peter Clausen -Reviewed-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210106133650.13509-1-lars@metafoo.de -Signed-off-by: Mark Brown ---- - sound/soc/atmel/atmel-pcm-pdc.c | 78 ++------------------------------- - 1 file changed, 4 insertions(+), 74 deletions(-) - ---- a/sound/soc/atmel/atmel-pcm-pdc.c -+++ b/sound/soc/atmel/atmel-pcm-pdc.c -@@ -34,86 +34,21 @@ - #include "atmel-pcm.h" - - --static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, -- int stream) --{ -- struct snd_pcm_substream *substream = pcm->streams[stream].substream; -- struct snd_dma_buffer *buf = &substream->dma_buffer; -- size_t size = ATMEL_SSC_DMABUF_SIZE; -- -- buf->dev.type = SNDRV_DMA_TYPE_DEV; -- buf->dev.dev = pcm->card->dev; -- buf->private_data = NULL; -- buf->area = dma_alloc_coherent(pcm->card->dev, size, -- &buf->addr, GFP_KERNEL); -- pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n", -- (void *)buf->area, (void *)(long)buf->addr, size); -- -- if (!buf->area) -- return -ENOMEM; -- -- buf->bytes = size; -- return 0; --} -- --static int atmel_pcm_mmap(struct snd_soc_component *component, -- struct snd_pcm_substream *substream, -- struct vm_area_struct *vma) --{ -- return remap_pfn_range(vma, vma->vm_start, -- substream->dma_buffer.addr >> PAGE_SHIFT, -- vma->vm_end - vma->vm_start, vma->vm_page_prot); --} -- - static int atmel_pcm_new(struct snd_soc_component *component, - struct snd_soc_pcm_runtime *rtd) - { - struct snd_card *card = rtd->card->snd_card; -- struct snd_pcm *pcm = rtd->pcm; - int ret; - - ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - -- if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { -- pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n"); -- ret = atmel_pcm_preallocate_dma_buffer(pcm, -- SNDRV_PCM_STREAM_PLAYBACK); -- if (ret) -- goto out; -- } -+ snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV, -+ card->dev, ATMEL_SSC_DMABUF_SIZE, -+ ATMEL_SSC_DMABUF_SIZE); - -- if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { -- pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n"); -- ret = atmel_pcm_preallocate_dma_buffer(pcm, -- SNDRV_PCM_STREAM_CAPTURE); -- if (ret) -- goto out; -- } -- out: -- return ret; --} -- --static void atmel_pcm_free(struct snd_soc_component *component, -- struct snd_pcm *pcm) --{ -- struct snd_pcm_substream *substream; -- struct snd_dma_buffer *buf; -- int stream; -- -- for (stream = 0; stream < 2; stream++) { -- substream = pcm->streams[stream].substream; -- if (!substream) -- continue; -- -- buf = &substream->dma_buffer; -- if (!buf->area) -- continue; -- dma_free_coherent(pcm->card->dev, buf->bytes, -- buf->area, buf->addr); -- buf->area = NULL; -- } -+ return 0; - } - - /*--------------------------------------------------------------------------*\ -@@ -210,9 +145,6 @@ static int atmel_pcm_hw_params(struct sn - /* this may get called several times by oss emulation - * with different params */ - -- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); -- runtime->dma_bytes = params_buffer_bytes(params); -- - prtd->params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream); - prtd->params->dma_intr_handler = atmel_pcm_dma_irq; - -@@ -384,9 +316,7 @@ static const struct snd_soc_component_dr - .prepare = atmel_pcm_prepare, - .trigger = atmel_pcm_trigger, - .pointer = atmel_pcm_pointer, -- .mmap = atmel_pcm_mmap, - .pcm_construct = atmel_pcm_new, -- .pcm_destruct = atmel_pcm_free, - }; - - int atmel_pcm_pdc_platform_register(struct device *dev) diff --git a/target/linux/at91/patches-5.15/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch b/target/linux/at91/patches-5.15/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch deleted file mode 100644 index af1c01bf90..0000000000 --- a/target/linux/at91/patches-5.15/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch +++ /dev/null @@ -1,141 +0,0 @@ -From f39f2312a68ec0843adba08f9c9182ffa5624190 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 16 Dec 2020 14:57:33 +0200 -Subject: [PATCH 145/247] power: reset: at91-sama5d2_shdwc: add support for - sama7g5 - -Add support for SAMA7G5 by adding proper struct reg_config structure -and since SAMA7G5 is not currently on LPDDR setups the commit also -avoid the mapping of DDR controller. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Sebastian Reichel ---- - drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++------ - 1 file changed, 54 insertions(+), 18 deletions(-) - ---- a/drivers/power/reset/at91-sama5d2_shdwc.c -+++ b/drivers/power/reset/at91-sama5d2_shdwc.c -@@ -78,9 +78,15 @@ struct pmc_reg_config { - u8 mckr; - }; - -+struct ddrc_reg_config { -+ u32 type_offset; -+ u32 type_mask; -+}; -+ - struct reg_config { - struct shdwc_reg_config shdwc; - struct pmc_reg_config pmc; -+ struct ddrc_reg_config ddrc; - }; - - struct shdwc { -@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_r - .pmc = { - .mckr = 0x30, - }, -+ .ddrc = { -+ .type_offset = AT91_DDRSDRC_MDR, -+ .type_mask = AT91_DDRSDRC_MD -+ }, - }; - - static const struct reg_config sam9x60_reg_config = { -@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_r - .pmc = { - .mckr = 0x28, - }, -+ .ddrc = { -+ .type_offset = AT91_DDRSDRC_MDR, -+ .type_mask = AT91_DDRSDRC_MD -+ }, -+}; -+ -+static const struct reg_config sama7g5_reg_config = { -+ .shdwc = { -+ .wkup_pin_input = 0, -+ .mr_rtcwk_shift = 17, -+ .mr_rttwk_shift = 16, -+ .sr_rtcwk_shift = 5, -+ .sr_rttwk_shift = 4, -+ }, -+ .pmc = { -+ .mckr = 0x28, -+ }, - }; - - static const struct of_device_id at91_shdwc_of_match[] = { -@@ -285,6 +312,10 @@ static const struct of_device_id at91_sh - { - .compatible = "microchip,sam9x60-shdwc", - .data = &sam9x60_reg_config, -+ }, -+ { -+ .compatible = "microchip,sama7g5-shdwc", -+ .data = &sama7g5_reg_config, - }, { - /*sentinel*/ - } -@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_ma - static const struct of_device_id at91_pmc_ids[] = { - { .compatible = "atmel,sama5d2-pmc" }, - { .compatible = "microchip,sam9x60-pmc" }, -+ { .compatible = "microchip,sama7g5-pmc" }, - { /* Sentinel. */ } - }; - -@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struc - goto clk_disable; - } - -- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc"); -- if (!np) { -- ret = -ENODEV; -- goto unmap; -- } -+ if (at91_shdwc->rcfg->ddrc.type_mask) { -+ np = of_find_compatible_node(NULL, NULL, -+ "atmel,sama5d3-ddramc"); -+ if (!np) { -+ ret = -ENODEV; -+ goto unmap; -+ } - -- at91_shdwc->mpddrc_base = of_iomap(np, 0); -- of_node_put(np); -+ at91_shdwc->mpddrc_base = of_iomap(np, 0); -+ of_node_put(np); - -- if (!at91_shdwc->mpddrc_base) { -- ret = -ENOMEM; -- goto unmap; -+ if (!at91_shdwc->mpddrc_base) { -+ ret = -ENOMEM; -+ goto unmap; -+ } -+ -+ ddr_type = readl(at91_shdwc->mpddrc_base + -+ at91_shdwc->rcfg->ddrc.type_offset) & -+ at91_shdwc->rcfg->ddrc.type_mask; -+ if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 && -+ ddr_type != AT91_DDRSDRC_MD_LPDDR3) { -+ iounmap(at91_shdwc->mpddrc_base); -+ at91_shdwc->mpddrc_base = NULL; -+ } - } - - pm_power_off = at91_poweroff; - -- ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) & -- AT91_DDRSDRC_MD; -- if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 && -- ddr_type != AT91_DDRSDRC_MD_LPDDR3) { -- iounmap(at91_shdwc->mpddrc_base); -- at91_shdwc->mpddrc_base = NULL; -- } -- - return 0; - - unmap: diff --git a/target/linux/at91/patches-5.15/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch b/target/linux/at91/patches-5.15/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch deleted file mode 100644 index 84dea5a48a..0000000000 --- a/target/linux/at91/patches-5.15/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch +++ /dev/null @@ -1,121 +0,0 @@ -From bd819c78346012ae0627b1cd4f6ceb1b51162c71 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 27 Jan 2021 13:45:44 +0200 -Subject: [PATCH 146/247] pinctrl: at91-pio4: add support for slew-rate - -SAMA7G5 supports slew rate configuration. Adapt the driver for this. -For output switching frequencies lower than 50MHz the slew rate needs to -be enabled. Since most of the pins on SAMA7G5 fall into this category -enabled the slew rate by default. - -Signed-off-by: Claudiu Beznea -Acked-by: Ludovic Desroches -Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/pinctrl-at91-pio4.c | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - ---- a/drivers/pinctrl/pinctrl-at91-pio4.c -+++ b/drivers/pinctrl/pinctrl-at91-pio4.c -@@ -36,6 +36,7 @@ - #define ATMEL_PIO_DIR_MASK BIT(8) - #define ATMEL_PIO_PUEN_MASK BIT(9) - #define ATMEL_PIO_PDEN_MASK BIT(10) -+#define ATMEL_PIO_SR_MASK BIT(11) - #define ATMEL_PIO_IFEN_MASK BIT(12) - #define ATMEL_PIO_IFSCEN_MASK BIT(13) - #define ATMEL_PIO_OPD_MASK BIT(14) -@@ -76,10 +77,12 @@ - * @nbanks: number of PIO banks - * @last_bank_count: number of lines in the last bank (can be less than - * the rest of the banks). -+ * @slew_rate_support: slew rate support - */ - struct atmel_pioctrl_data { - unsigned nbanks; - unsigned last_bank_count; -+ unsigned int slew_rate_support; - }; - - struct atmel_group { -@@ -117,6 +120,7 @@ struct atmel_pin { - * @pm_suspend_backup: backup/restore register values on suspend/resume - * @dev: device entry for the Atmel PIO controller. - * @node: node of the Atmel PIO controller. -+ * @slew_rate_support: slew rate support - */ - struct atmel_pioctrl { - void __iomem *reg_base; -@@ -138,6 +142,7 @@ struct atmel_pioctrl { - } *pm_suspend_backup; - struct device *dev; - struct device_node *node; -+ unsigned int slew_rate_support; - }; - - static const char * const atmel_functions[] = { -@@ -760,6 +765,13 @@ static int atmel_conf_pin_config_group_g - return -EINVAL; - arg = 1; - break; -+ case PIN_CONFIG_SLEW_RATE: -+ if (!atmel_pioctrl->slew_rate_support) -+ return -EOPNOTSUPP; -+ if (!(res & ATMEL_PIO_SR_MASK)) -+ return -EINVAL; -+ arg = 1; -+ break; - case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: - if (!(res & ATMEL_PIO_DRVSTR_MASK)) - return -EINVAL; -@@ -793,6 +805,10 @@ static int atmel_conf_pin_config_group_s - dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n", - __func__, pin_id, configs[i]); - -+ /* Keep slew rate enabled by default. */ -+ if (atmel_pioctrl->slew_rate_support) -+ conf |= ATMEL_PIO_SR_MASK; -+ - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - conf &= (~ATMEL_PIO_PUEN_MASK); -@@ -850,6 +866,13 @@ static int atmel_conf_pin_config_group_s - ATMEL_PIO_SODR); - } - break; -+ case PIN_CONFIG_SLEW_RATE: -+ if (!atmel_pioctrl->slew_rate_support) -+ break; -+ /* And remove it if explicitly requested. */ -+ if (arg == 0) -+ conf &= ~ATMEL_PIO_SR_MASK; -+ break; - case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: - switch (arg) { - case ATMEL_PIO_DRVSTR_LO: -@@ -901,6 +924,8 @@ static void atmel_conf_pin_config_dbg_sh - seq_printf(s, "%s ", "open-drain"); - if (conf & ATMEL_PIO_SCHMITT_MASK) - seq_printf(s, "%s ", "schmitt"); -+ if (atmel_pioctrl->slew_rate_support && (conf & ATMEL_PIO_SR_MASK)) -+ seq_printf(s, "%s ", "slew-rate"); - if (conf & ATMEL_PIO_DRVSTR_MASK) { - switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) { - case ATMEL_PIO_DRVSTR_ME: -@@ -994,6 +1019,7 @@ static const struct atmel_pioctrl_data a - static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = { - .nbanks = 5, - .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */ -+ .slew_rate_support = 1, - }; - - static const struct of_device_id atmel_pctrl_of_match[] = { -@@ -1039,6 +1065,7 @@ static int atmel_pinctrl_probe(struct pl - atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK; - atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count; - } -+ atmel_pioctrl->slew_rate_support = atmel_pioctrl_data->slew_rate_support; - - atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(atmel_pioctrl->reg_base)) diff --git a/target/linux/at91/patches-5.15/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch b/target/linux/at91/patches-5.15/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch deleted file mode 100644 index 0be811cc97..0000000000 --- a/target/linux/at91/patches-5.15/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch +++ /dev/null @@ -1,340 +0,0 @@ -From 99629d1ad7e4e03ac3324d36b703220555b65566 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 27 Jan 2021 13:45:45 +0200 -Subject: [PATCH 147/247] pinctrl: at91-pio4: fix "Prefer 'unsigned int' to - bare use of 'unsigned'" - -Fix "Prefer 'unsigned int' to bare use of 'unsigned'" checkpatch.pl -warning. - -Signed-off-by: Claudiu Beznea -Acked-by: Ludovic Desroches -Link: https://lore.kernel.org/r/1611747945-29960-4-git-send-email-claudiu.beznea@microchip.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/pinctrl-at91-pio4.c | 110 ++++++++++++++-------------- - 1 file changed, 57 insertions(+), 53 deletions(-) - ---- a/drivers/pinctrl/pinctrl-at91-pio4.c -+++ b/drivers/pinctrl/pinctrl-at91-pio4.c -@@ -80,8 +80,8 @@ - * @slew_rate_support: slew rate support - */ - struct atmel_pioctrl_data { -- unsigned nbanks; -- unsigned last_bank_count; -+ unsigned int nbanks; -+ unsigned int last_bank_count; - unsigned int slew_rate_support; - }; - -@@ -91,11 +91,11 @@ struct atmel_group { - }; - - struct atmel_pin { -- unsigned pin_id; -- unsigned mux; -- unsigned ioset; -- unsigned bank; -- unsigned line; -+ unsigned int pin_id; -+ unsigned int mux; -+ unsigned int ioset; -+ unsigned int bank; -+ unsigned int line; - const char *device; - }; - -@@ -125,16 +125,16 @@ struct atmel_pin { - struct atmel_pioctrl { - void __iomem *reg_base; - struct clk *clk; -- unsigned nbanks; -+ unsigned int nbanks; - struct pinctrl_dev *pinctrl_dev; - struct atmel_group *groups; - const char * const *group_names; - struct atmel_pin **pins; -- unsigned npins; -+ unsigned int npins; - struct gpio_chip *gpio_chip; - struct irq_domain *irq_domain; - int *irqs; -- unsigned *pm_wakeup_sources; -+ unsigned int *pm_wakeup_sources; - struct { - u32 imr; - u32 odsr; -@@ -177,11 +177,11 @@ static void atmel_gpio_irq_ack(struct ir - */ - } - --static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned type) -+static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned int type) - { - struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d); - struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq]; -- unsigned reg; -+ unsigned int reg; - - atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR, - BIT(pin->line)); -@@ -268,7 +268,7 @@ static struct irq_chip atmel_gpio_irq_ch - .irq_set_wake = atmel_gpio_irq_set_wake, - }; - --static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -+static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) - { - struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); - -@@ -316,11 +316,12 @@ static void atmel_gpio_irq_handler(struc - chained_irq_exit(chip, desc); - } - --static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -+static int atmel_gpio_direction_input(struct gpio_chip *chip, -+ unsigned int offset) - { - struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); - struct atmel_pin *pin = atmel_pioctrl->pins[offset]; -- unsigned reg; -+ unsigned int reg; - - atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR, - BIT(pin->line)); -@@ -331,11 +332,11 @@ static int atmel_gpio_direction_input(st - return 0; - } - --static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset) -+static int atmel_gpio_get(struct gpio_chip *chip, unsigned int offset) - { - struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); - struct atmel_pin *pin = atmel_pioctrl->pins[offset]; -- unsigned reg; -+ unsigned int reg; - - reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_PDSR); - -@@ -369,12 +370,13 @@ static int atmel_gpio_get_multiple(struc - return 0; - } - --static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset, -+static int atmel_gpio_direction_output(struct gpio_chip *chip, -+ unsigned int offset, - int value) - { - struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); - struct atmel_pin *pin = atmel_pioctrl->pins[offset]; -- unsigned reg; -+ unsigned int reg; - - atmel_gpio_write(atmel_pioctrl, pin->bank, - value ? ATMEL_PIO_SODR : ATMEL_PIO_CODR, -@@ -389,7 +391,7 @@ static int atmel_gpio_direction_output(s - return 0; - } - --static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -+static void atmel_gpio_set(struct gpio_chip *chip, unsigned int offset, int val) - { - struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip); - struct atmel_pin *pin = atmel_pioctrl->pins[offset]; -@@ -445,11 +447,11 @@ static struct gpio_chip atmel_gpio_chip - - /* --- PINCTRL --- */ - static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev, -- unsigned pin_id) -+ unsigned int pin_id) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); -- unsigned bank = atmel_pioctrl->pins[pin_id]->bank; -- unsigned line = atmel_pioctrl->pins[pin_id]->line; -+ unsigned int bank = atmel_pioctrl->pins[pin_id]->bank; -+ unsigned int line = atmel_pioctrl->pins[pin_id]->line; - void __iomem *addr = atmel_pioctrl->reg_base - + bank * ATMEL_PIO_BANK_OFFSET; - -@@ -461,11 +463,11 @@ static unsigned int atmel_pin_config_rea - } - - static void atmel_pin_config_write(struct pinctrl_dev *pctldev, -- unsigned pin_id, u32 conf) -+ unsigned int pin_id, u32 conf) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); -- unsigned bank = atmel_pioctrl->pins[pin_id]->bank; -- unsigned line = atmel_pioctrl->pins[pin_id]->line; -+ unsigned int bank = atmel_pioctrl->pins[pin_id]->bank; -+ unsigned int line = atmel_pioctrl->pins[pin_id]->line; - void __iomem *addr = atmel_pioctrl->reg_base - + bank * ATMEL_PIO_BANK_OFFSET; - -@@ -483,7 +485,7 @@ static int atmel_pctl_get_groups_count(s - } - - static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev, -- unsigned selector) -+ unsigned int selector) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); - -@@ -491,19 +493,20 @@ static const char *atmel_pctl_get_group_ - } - - static int atmel_pctl_get_group_pins(struct pinctrl_dev *pctldev, -- unsigned selector, const unsigned **pins, -- unsigned *num_pins) -+ unsigned int selector, -+ const unsigned int **pins, -+ unsigned int *num_pins) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); - -- *pins = (unsigned *)&atmel_pioctrl->groups[selector].pin; -+ *pins = (unsigned int *)&atmel_pioctrl->groups[selector].pin; - *num_pins = 1; - - return 0; - } - - static struct atmel_group * --atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned pin) -+atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned int pin) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); - int i; -@@ -524,7 +527,7 @@ static int atmel_pctl_xlate_pinfunc(stru - const char **func_name) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); -- unsigned pin_id, func_id; -+ unsigned int pin_id, func_id; - struct atmel_group *grp; - - pin_id = ATMEL_GET_PIN_NO(pinfunc); -@@ -554,10 +557,10 @@ static int atmel_pctl_xlate_pinfunc(stru - static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev, - struct device_node *np, - struct pinctrl_map **map, -- unsigned *reserved_maps, -- unsigned *num_maps) -+ unsigned int *reserved_maps, -+ unsigned int *num_maps) - { -- unsigned num_pins, num_configs, reserve; -+ unsigned int num_pins, num_configs, reserve; - unsigned long *configs; - struct property *pins; - u32 pinfunc; -@@ -628,10 +631,10 @@ exit: - static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, - struct device_node *np_config, - struct pinctrl_map **map, -- unsigned *num_maps) -+ unsigned int *num_maps) - { - struct device_node *np; -- unsigned reserved_maps; -+ unsigned int reserved_maps; - int ret; - - *map = NULL; -@@ -679,13 +682,13 @@ static int atmel_pmx_get_functions_count - } - - static const char *atmel_pmx_get_function_name(struct pinctrl_dev *pctldev, -- unsigned selector) -+ unsigned int selector) - { - return atmel_functions[selector]; - } - - static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev, -- unsigned selector, -+ unsigned int selector, - const char * const **groups, - unsigned * const num_groups) - { -@@ -698,11 +701,11 @@ static int atmel_pmx_get_function_groups - } - - static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev, -- unsigned function, -- unsigned group) -+ unsigned int function, -+ unsigned int group) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); -- unsigned pin; -+ unsigned int pin; - u32 conf; - - dev_dbg(pctldev->dev, "enable function %s group %s\n", -@@ -726,13 +729,13 @@ static const struct pinmux_ops atmel_pmx - }; - - static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev, -- unsigned group, -+ unsigned int group, - unsigned long *config) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); -- unsigned param = pinconf_to_config_param(*config), arg = 0; -+ unsigned int param = pinconf_to_config_param(*config), arg = 0; - struct atmel_group *grp = atmel_pioctrl->groups + group; -- unsigned pin_id = grp->pin; -+ unsigned int pin_id = grp->pin; - u32 res; - - res = atmel_pin_config_read(pctldev, pin_id); -@@ -786,21 +789,21 @@ static int atmel_conf_pin_config_group_g - } - - static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, -- unsigned group, -+ unsigned int group, - unsigned long *configs, -- unsigned num_configs) -+ unsigned int num_configs) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); - struct atmel_group *grp = atmel_pioctrl->groups + group; -- unsigned bank, pin, pin_id = grp->pin; -+ unsigned int bank, pin, pin_id = grp->pin; - u32 mask, conf = 0; - int i; - - conf = atmel_pin_config_read(pctldev, pin_id); - - for (i = 0; i < num_configs; i++) { -- unsigned param = pinconf_to_config_param(configs[i]); -- unsigned arg = pinconf_to_config_argument(configs[i]); -+ unsigned int param = pinconf_to_config_param(configs[i]); -+ unsigned int arg = pinconf_to_config_argument(configs[i]); - - dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n", - __func__, pin_id, configs[i]); -@@ -900,7 +903,8 @@ static int atmel_conf_pin_config_group_s - } - - static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev, -- struct seq_file *s, unsigned pin_id) -+ struct seq_file *s, -+ unsigned int pin_id) - { - struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev); - u32 conf; -@@ -1108,8 +1112,8 @@ static int atmel_pinctrl_probe(struct pl - return -ENOMEM; - for (i = 0 ; i < atmel_pioctrl->npins; i++) { - struct atmel_group *group = atmel_pioctrl->groups + i; -- unsigned bank = ATMEL_PIO_BANK(i); -- unsigned line = ATMEL_PIO_LINE(i); -+ unsigned int bank = ATMEL_PIO_BANK(i); -+ unsigned int line = ATMEL_PIO_LINE(i); - - atmel_pioctrl->pins[i] = devm_kzalloc(dev, - sizeof(**atmel_pioctrl->pins), GFP_KERNEL); diff --git a/target/linux/at91/patches-5.15/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch b/target/linux/at91/patches-5.15/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch deleted file mode 100644 index 721ddaea00..0000000000 --- a/target/linux/at91/patches-5.15/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 096f58e564aed56936ef6de42a44c3101e9b8ed1 Mon Sep 17 00:00:00 2001 -From: Atish Patra -Date: Wed, 3 Mar 2021 11:55:49 -0800 -Subject: [PATCH 148/247] net: macb: Add default usrio config to default gem - config - -There is no usrio config defined for default gem config leading to -a kernel panic devices that don't define a data. This issue can be -reprdouced with microchip polar fire soc where compatible string -is defined as "cdns,macb". - -Fixes: edac63861db7 ("add userio bits as platform configuration") - -Signed-off-by: Atish Patra -Acked-by: Nicolas Ferre -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/cadence/macb_main.c | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/cadence/macb_main.c -+++ b/drivers/net/ethernet/cadence/macb_main.c -@@ -3868,6 +3868,13 @@ static int macb_init(struct platform_dev - return 0; - } - -+static const struct macb_usrio_config macb_default_usrio = { -+ .mii = MACB_BIT(MII), -+ .rmii = MACB_BIT(RMII), -+ .rgmii = GEM_BIT(RGMII), -+ .refclk = MACB_BIT(CLKEN), -+}; -+ - #if defined(CONFIG_OF) - /* 1518 rounded up */ - #define AT91ETHER_MAX_RBUFF_SZ 0x600 -@@ -4383,13 +4390,6 @@ static int fu540_c000_init(struct platfo - return macb_init(pdev); - } - --static const struct macb_usrio_config macb_default_usrio = { -- .mii = MACB_BIT(MII), -- .rmii = MACB_BIT(RMII), -- .rgmii = GEM_BIT(RGMII), -- .refclk = MACB_BIT(CLKEN), --}; -- - static const struct macb_usrio_config sama7g5_usrio = { - .mii = 0, - .rmii = 1, -@@ -4538,6 +4538,7 @@ static const struct macb_config default_ - .dma_burst_length = 16, - .clk_init = macb_clk_init, - .init = macb_init, -+ .usrio = &macb_default_usrio, - .jumbo_max_len = 10240, - }; - diff --git a/target/linux/at91/patches-5.15/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch b/target/linux/at91/patches-5.15/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch deleted file mode 100644 index cc7f6583aa..0000000000 --- a/target/linux/at91/patches-5.15/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 746aba88c64e409cbc3757a5f81fad5b5c74bbcc Mon Sep 17 00:00:00 2001 -From: Lee Jones -Date: Wed, 3 Mar 2021 12:41:49 +0000 -Subject: [PATCH 149/247] ARM: at91: pm: Move prototypes to mutually included - header -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Both the caller and the supplier's source file should have access to -the include file containing the prototypes. - -Fixes the following W=1 kernel build warning(s): - - drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes] - 1637 | void at91_pinctrl_gpio_suspend(void) - | ^~~~~~~~~~~~~~~~~~~~~~~~~ - drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes] - 1661 | void at91_pinctrl_gpio_resume(void) - | ^~~~~~~~~~~~~~~~~~~~~~~~ - -Cc: Russell King -Cc: Nicolas Ferre -Cc: Alexandre Belloni -Cc: Ludovic Desroches -Signed-off-by: Lee Jones -Acked-by: Linus Walleij -Signed-off-by: Alexandre Belloni -Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org ---- - arch/arm/mach-at91/pm.c | 19 ++++++++----------- - drivers/pinctrl/pinctrl-at91.c | 2 ++ - include/soc/at91/pm.h | 16 ++++++++++++++++ - 3 files changed, 26 insertions(+), 11 deletions(-) - create mode 100644 include/soc/at91/pm.h - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -17,6 +17,8 @@ - #include - #include - -+#include -+ - #include - #include - #include -@@ -25,17 +27,6 @@ - #include "generic.h" - #include "pm.h" - --/* -- * FIXME: this is needed to communicate between the pinctrl driver and -- * the PM implementation in the machine. Possibly part of the PM -- * implementation should be moved down into the pinctrl driver and get -- * called as part of the generic suspend/resume path. -- */ --#ifdef CONFIG_PINCTRL_AT91 --extern void at91_pinctrl_gpio_suspend(void); --extern void at91_pinctrl_gpio_resume(void); --#endif -- - struct at91_soc_pm { - int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); - int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); -@@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_stat - static int at91_pm_enter(suspend_state_t state) - { - #ifdef CONFIG_PINCTRL_AT91 -+ /* -+ * FIXME: this is needed to communicate between the pinctrl driver and -+ * the PM implementation in the machine. Possibly part of the PM -+ * implementation should be moved down into the pinctrl driver and get -+ * called as part of the generic suspend/resume path. -+ */ - at91_pinctrl_gpio_suspend(); - #endif - ---- a/drivers/pinctrl/pinctrl-at91.c -+++ b/drivers/pinctrl/pinctrl-at91.c -@@ -23,6 +23,8 @@ - /* Since we request GPIOs from ourself */ - #include - -+#include -+ - #include "pinctrl-at91.h" - #include "core.h" - ---- /dev/null -+++ b/include/soc/at91/pm.h -@@ -0,0 +1,16 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* -+ * Atmel Power Management -+ * -+ * Copyright (C) 2020 Atmel -+ * -+ * Author: Lee Jones -+ */ -+ -+#ifndef __SOC_ATMEL_PM_H -+#define __SOC_ATMEL_PM_H -+ -+void at91_pinctrl_gpio_suspend(void); -+void at91_pinctrl_gpio_resume(void); -+ -+#endif /* __SOC_ATMEL_PM_H */ diff --git a/target/linux/at91/patches-5.15/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch b/target/linux/at91/patches-5.15/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch deleted file mode 100644 index 174d0b3ced..0000000000 --- a/target/linux/at91/patches-5.15/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch +++ /dev/null @@ -1,46 +0,0 @@ -From d6493e6f1c42f7ad350ea25e11f0e71fc32e6116 Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Mon, 1 Mar 2021 19:09:00 +0200 -Subject: [PATCH 150/247] ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5 - -Microchip's new SAMA7G5 includes an updated I2S-MCC compatible with the -previous version found on SAM9X60. The new controller includes 8 (4 * 2) -input and output data pins for up to 8 channels for I2S and Left-Justified -formats. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210301170905.835091-3-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/Kconfig | 3 +++ - sound/soc/atmel/mchp-i2s-mcc.c | 3 +++ - 2 files changed, 6 insertions(+) - ---- a/sound/soc/atmel/Kconfig -+++ b/sound/soc/atmel/Kconfig -@@ -126,10 +126,13 @@ config SND_MCHP_SOC_I2S_MCC - Say Y or M if you want to add support for I2S Multi-Channel ASoC - driver on the following Microchip platforms: - - sam9x60 -+ - sama7g5 - - The I2SMCC complies with the Inter-IC Sound (I2S) bus specification - and supports a Time Division Multiplexed (TDM) interface with - external multi-channel audio codecs. -+ Starting with sama7g5, I2S and Left-Justified multi-channel is -+ supported by using multiple data pins, output and input, without TDM. - - config SND_MCHP_SOC_SPDIFTX - tristate "Microchip ASoC driver for boards using S/PDIF TX" ---- a/sound/soc/atmel/mchp-i2s-mcc.c -+++ b/sound/soc/atmel/mchp-i2s-mcc.c -@@ -873,6 +873,9 @@ static const struct of_device_id mchp_i2 - { - .compatible = "microchip,sam9x60-i2smcc", - }, -+ { -+ .compatible = "microchip,sama7g5-i2smcc", -+ }, - { /* sentinel */ } - }; - MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids); diff --git a/target/linux/at91/patches-5.15/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch b/target/linux/at91/patches-5.15/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch deleted file mode 100644 index 5047e04d5b..0000000000 --- a/target/linux/at91/patches-5.15/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 5bef4e8125d09443b5486971d5550ed285cde4b1 Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Mon, 1 Mar 2021 19:09:01 +0200 -Subject: [PATCH 151/247] ASoC: mchp-i2s-mcc: Add multi-channel support for I2S - and LEFT_J formats - -The latest I2S-MCC available in SAMA7G5 supports multi-channel for I2S and -Left-Justified formats. For this, the new version uses 8 (4 * 2) input and -output pins, with each pin being responsible for 2 channels. This sums up -to a total of 8 channels for synchronous capture and playback. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210301170905.835091-4-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/mchp-i2s-mcc.c | 38 ++++++++++++++++++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/sound/soc/atmel/mchp-i2s-mcc.c -+++ b/sound/soc/atmel/mchp-i2s-mcc.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -225,6 +226,10 @@ static const struct regmap_config mchp_i - .max_register = MCHP_I2SMCC_VERSION, - }; - -+struct mchp_i2s_mcc_soc_data { -+ unsigned int data_pin_pair_num; -+}; -+ - struct mchp_i2s_mcc_dev { - struct wait_queue_head wq_txrdy; - struct wait_queue_head wq_rxrdy; -@@ -232,6 +237,7 @@ struct mchp_i2s_mcc_dev { - struct regmap *regmap; - struct clk *pclk; - struct clk *gclk; -+ const struct mchp_i2s_mcc_soc_data *soc; - struct snd_dmaengine_dai_dma_data playback; - struct snd_dmaengine_dai_dma_data capture; - unsigned int fmt; -@@ -549,6 +555,17 @@ static int mchp_i2s_mcc_hw_params(struct - } - - if (dev->fmt & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J)) { -+ /* for I2S and LEFT_J one pin is needed for every 2 channels */ -+ if (channels > dev->soc->data_pin_pair_num * 2) { -+ dev_err(dev->dev, -+ "unsupported number of audio channels: %d\n", -+ channels); -+ return -EINVAL; -+ } -+ -+ /* enable for interleaved format */ -+ mrb |= MCHP_I2SMCC_MRB_CRAMODE_REGULAR; -+ - switch (channels) { - case 1: - if (is_playback) -@@ -558,6 +575,12 @@ static int mchp_i2s_mcc_hw_params(struct - break; - case 2: - break; -+ case 4: -+ mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1; -+ break; -+ case 8: -+ mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2; -+ break; - default: - dev_err(dev->dev, "unsupported number of audio channels\n"); - return -EINVAL; -@@ -869,12 +892,22 @@ static const struct snd_soc_component_dr - }; - - #ifdef CONFIG_OF -+static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sam9x60 = { -+ .data_pin_pair_num = 1, -+}; -+ -+static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = { -+ .data_pin_pair_num = 4, -+}; -+ - static const struct of_device_id mchp_i2s_mcc_dt_ids[] = { - { - .compatible = "microchip,sam9x60-i2smcc", -+ .data = &mchp_i2s_mcc_sam9x60, - }, - { - .compatible = "microchip,sama7g5-i2smcc", -+ .data = &mchp_i2s_mcc_sama7g5, - }, - { /* sentinel */ } - }; -@@ -932,6 +965,11 @@ static int mchp_i2s_mcc_probe(struct pla - dev->gclk = NULL; - } - -+ dev->soc = of_device_get_match_data(&pdev->dev); -+ if (!dev->soc) { -+ dev_err(&pdev->dev, "failed to get soc data\n"); -+ return -ENODEV; -+ } - dev->dev = &pdev->dev; - dev->regmap = regmap; - platform_set_drvdata(pdev, dev); diff --git a/target/linux/at91/patches-5.15/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch b/target/linux/at91/patches-5.15/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch deleted file mode 100644 index 6d5a15d36b..0000000000 --- a/target/linux/at91/patches-5.15/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 2bbdc5b38603384996271a8817b0578a2360af2f Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Mon, 1 Mar 2021 19:09:03 +0200 -Subject: [PATCH 152/247] ASoC: mchp-i2s-mcc: Add support to select TDM pins - -SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a -single pair of pins for synchronous capture and playback, the controller -needs to be told which of the pair is connected. This can be mentioned -using the "microchip,tdm-data-pair" property from DT. The property is -optional, useful only if TDM is used. If it's missing, DIN/DOUT 0 pins -will be used by default. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210301170905.835091-6-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/mchp-i2s-mcc.c | 52 +++++++++++++++++++++++++++++++--- - 1 file changed, 48 insertions(+), 4 deletions(-) - ---- a/sound/soc/atmel/mchp-i2s-mcc.c -+++ b/sound/soc/atmel/mchp-i2s-mcc.c -@@ -100,6 +100,8 @@ - #define MCHP_I2SMCC_MRA_DATALENGTH_8_BITS_COMPACT (7 << 1) - - #define MCHP_I2SMCC_MRA_WIRECFG_MASK GENMASK(5, 4) -+#define MCHP_I2SMCC_MRA_WIRECFG_TDM(pin) (((pin) << 4) & \ -+ MCHP_I2SMCC_MRA_WIRECFG_MASK) - #define MCHP_I2SMCC_MRA_WIRECFG_I2S_1_TDM_0 (0 << 4) - #define MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1 (1 << 4) - #define MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2 (2 << 4) -@@ -245,6 +247,7 @@ struct mchp_i2s_mcc_dev { - unsigned int frame_length; - int tdm_slots; - int channels; -+ u8 tdm_data_pair; - unsigned int gclk_use:1; - unsigned int gclk_running:1; - unsigned int tx_rdy:1; -@@ -589,6 +592,8 @@ static int mchp_i2s_mcc_hw_params(struct - if (!frame_length) - frame_length = 2 * params_physical_width(params); - } else if (dev->fmt & SND_SOC_DAIFMT_DSP_A) { -+ mra |= MCHP_I2SMCC_MRA_WIRECFG_TDM(dev->tdm_data_pair); -+ - if (dev->tdm_slots) { - if (channels % 2 && channels * 2 <= dev->tdm_slots) { - /* -@@ -914,6 +919,45 @@ static const struct of_device_id mchp_i2 - MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids); - #endif - -+static int mchp_i2s_mcc_soc_data_parse(struct platform_device *pdev, -+ struct mchp_i2s_mcc_dev *dev) -+{ -+ int err; -+ -+ if (!dev->soc) { -+ dev_err(&pdev->dev, "failed to get soc data\n"); -+ return -ENODEV; -+ } -+ -+ if (dev->soc->data_pin_pair_num == 1) -+ return 0; -+ -+ err = of_property_read_u8(pdev->dev.of_node, "microchip,tdm-data-pair", -+ &dev->tdm_data_pair); -+ if (err < 0 && err != -EINVAL) { -+ dev_err(&pdev->dev, -+ "bad property data for 'microchip,tdm-data-pair': %d", -+ err); -+ return err; -+ } -+ if (err == -EINVAL) { -+ dev_info(&pdev->dev, -+ "'microchip,tdm-data-pair' not found; assuming DIN/DOUT 0 for TDM\n"); -+ dev->tdm_data_pair = 0; -+ } else { -+ if (dev->tdm_data_pair > dev->soc->data_pin_pair_num - 1) { -+ dev_err(&pdev->dev, -+ "invalid value for 'microchip,tdm-data-pair': %d\n", -+ dev->tdm_data_pair); -+ return -EINVAL; -+ } -+ dev_dbg(&pdev->dev, "TMD format on DIN/DOUT %d pins\n", -+ dev->tdm_data_pair); -+ } -+ -+ return 0; -+} -+ - static int mchp_i2s_mcc_probe(struct platform_device *pdev) - { - struct mchp_i2s_mcc_dev *dev; -@@ -966,10 +1010,10 @@ static int mchp_i2s_mcc_probe(struct pla - } - - dev->soc = of_device_get_match_data(&pdev->dev); -- if (!dev->soc) { -- dev_err(&pdev->dev, "failed to get soc data\n"); -- return -ENODEV; -- } -+ err = mchp_i2s_mcc_soc_data_parse(pdev, dev); -+ if (err < 0) -+ return err; -+ - dev->dev = &pdev->dev; - dev->regmap = regmap; - platform_set_drvdata(pdev, dev); diff --git a/target/linux/at91/patches-5.15/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch b/target/linux/at91/patches-5.15/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch deleted file mode 100644 index 24e0e4de4c..0000000000 --- a/target/linux/at91/patches-5.15/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 36bb4f0ab8e7ef69cc11d4d888aa898223b0e901 Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Mon, 1 Mar 2021 19:09:04 +0200 -Subject: [PATCH 153/247] ASoC: mchp-i2s-mcc: Add FIFOs support - -I2S-MCC found on SAMA7G5 includes 2 FIFOs (capture and playback). When -FIFOs are enabled, bits I2SMCC_ISRA.TXLRDYx and I2SMCC_ISRA.TXRRDYx must -not be used. Bits I2SMCC_ISRB.TXFFRDY and I2SMCC_ISRB.RXFFRDY must be used -instead. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210301170905.835091-7-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/mchp-i2s-mcc.c | 76 +++++++++++++++++++++++++--------- - 1 file changed, 56 insertions(+), 20 deletions(-) - ---- a/sound/soc/atmel/mchp-i2s-mcc.c -+++ b/sound/soc/atmel/mchp-i2s-mcc.c -@@ -176,7 +176,7 @@ - */ - #define MCHP_I2SMCC_MRB_CRAMODE_REGULAR (1 << 0) - --#define MCHP_I2SMCC_MRB_FIFOEN BIT(1) -+#define MCHP_I2SMCC_MRB_FIFOEN BIT(4) - - #define MCHP_I2SMCC_MRB_DMACHUNK_MASK GENMASK(9, 8) - #define MCHP_I2SMCC_MRB_DMACHUNK(no_words) \ -@@ -230,6 +230,7 @@ static const struct regmap_config mchp_i - - struct mchp_i2s_mcc_soc_data { - unsigned int data_pin_pair_num; -+ bool has_fifo; - }; - - struct mchp_i2s_mcc_dev { -@@ -257,7 +258,7 @@ struct mchp_i2s_mcc_dev { - static irqreturn_t mchp_i2s_mcc_interrupt(int irq, void *dev_id) - { - struct mchp_i2s_mcc_dev *dev = dev_id; -- u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0; -+ u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0, idrb = 0; - irqreturn_t ret = IRQ_NONE; - - regmap_read(dev->regmap, MCHP_I2SMCC_IMRA, &imra); -@@ -275,24 +276,36 @@ static irqreturn_t mchp_i2s_mcc_interrup - * Tx/Rx ready interrupts are enabled when stopping only, to assure - * availability and to disable clocks if necessary - */ -- idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) | -- MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); -- if (idra) -+ if (dev->soc->has_fifo) { -+ idrb |= pendingb & (MCHP_I2SMCC_INT_TXFFRDY | -+ MCHP_I2SMCC_INT_RXFFRDY); -+ } else { -+ idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) | -+ MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); -+ } -+ if (idra || idrb) - ret = IRQ_HANDLED; - -- if ((imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) && -- (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) == -- (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) { -+ if ((!dev->soc->has_fifo && -+ (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) && -+ (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) == -+ (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) || -+ (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_TXFFRDY)) { - dev->tx_rdy = 1; - wake_up_interruptible(&dev->wq_txrdy); - } -- if ((imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) && -- (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) == -- (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) { -+ if ((!dev->soc->has_fifo && -+ (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) && -+ (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) == -+ (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) || -+ (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_RXFFRDY)) { - dev->rx_rdy = 1; - wake_up_interruptible(&dev->wq_rxrdy); - } -- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra); -+ if (dev->soc->has_fifo) -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB, idrb); -+ else -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra); - - return ret; - } -@@ -664,6 +677,10 @@ static int mchp_i2s_mcc_hw_params(struct - } - } - -+ /* enable FIFO if available */ -+ if (dev->soc->has_fifo) -+ mrb |= MCHP_I2SMCC_MRB_FIFOEN; -+ - /* - * If we are already running, the wanted setup must be - * the same with the one that's currently ongoing -@@ -726,8 +743,13 @@ static int mchp_i2s_mcc_hw_free(struct s - if (err == 0) { - dev_warn_once(dev->dev, - "Timeout waiting for Tx ready\n"); -- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, -- MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)); -+ if (dev->soc->has_fifo) -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB, -+ MCHP_I2SMCC_INT_TXFFRDY); -+ else -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, -+ MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)); -+ - dev->tx_rdy = 1; - } - } else { -@@ -737,8 +759,12 @@ static int mchp_i2s_mcc_hw_free(struct s - if (err == 0) { - dev_warn_once(dev->dev, - "Timeout waiting for Rx ready\n"); -- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, -- MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); -+ if (dev->soc->has_fifo) -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB, -+ MCHP_I2SMCC_INT_RXFFRDY); -+ else -+ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, -+ MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)); - dev->rx_rdy = 1; - } - } -@@ -765,7 +791,7 @@ static int mchp_i2s_mcc_trigger(struct s - struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai); - bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); - u32 cr = 0; -- u32 iera = 0; -+ u32 iera = 0, ierb = 0; - u32 sr; - int err; - -@@ -789,7 +815,10 @@ static int mchp_i2s_mcc_trigger(struct s - * Enable Tx Ready interrupts on all channels - * to assure all data is sent - */ -- iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels); -+ if (dev->soc->has_fifo) -+ ierb = MCHP_I2SMCC_INT_TXFFRDY; -+ else -+ iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels); - } else if (!is_playback && (sr & MCHP_I2SMCC_SR_RXEN)) { - cr = MCHP_I2SMCC_CR_RXDIS; - dev->rx_rdy = 0; -@@ -797,7 +826,10 @@ static int mchp_i2s_mcc_trigger(struct s - * Enable Rx Ready interrupts on all channels - * to assure all data is received - */ -- iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels); -+ if (dev->soc->has_fifo) -+ ierb = MCHP_I2SMCC_INT_RXFFRDY; -+ else -+ iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels); - } - break; - default: -@@ -815,7 +847,10 @@ static int mchp_i2s_mcc_trigger(struct s - } - } - -- regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera); -+ if (dev->soc->has_fifo) -+ regmap_write(dev->regmap, MCHP_I2SMCC_IERB, ierb); -+ else -+ regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera); - regmap_write(dev->regmap, MCHP_I2SMCC_CR, cr); - - return 0; -@@ -903,6 +938,7 @@ static struct mchp_i2s_mcc_soc_data mchp - - static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = { - .data_pin_pair_num = 4, -+ .has_fifo = true, - }; - - static const struct of_device_id mchp_i2s_mcc_dt_ids[] = { diff --git a/target/linux/at91/patches-5.15/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch b/target/linux/at91/patches-5.15/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch deleted file mode 100644 index c61e6b1c90..0000000000 --- a/target/linux/at91/patches-5.15/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch +++ /dev/null @@ -1,49 +0,0 @@ -From dc07cbae6e96843d26e8f10b16e901620bd16462 Mon Sep 17 00:00:00 2001 -From: Tudor Ambarus -Date: Fri, 9 Apr 2021 11:25:22 +0300 -Subject: [PATCH 154/247] pinctrl: at91-pio4: Fix slew rate disablement - -The slew rate was enabled by default for each configuration of the -pin. In case the pin had more than one configuration, even if -we set the slew rate as disabled in the device tree, the next pin -configuration would set again the slew rate enabled by default, -overwriting the slew rate disablement. -Instead of enabling the slew rate by default for each pin configuration, -enable the slew rate by default just once per pin, regardless of the -number of configurations. This way the slew rate disablement will also -work for cases where pins have multiple configurations. - -Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate") -Signed-off-by: Tudor Ambarus -Reviewed-by: Claudiu Beznea -Acked-by: Ludovic Desroches -Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/pinctrl/pinctrl-at91-pio4.c -+++ b/drivers/pinctrl/pinctrl-at91-pio4.c -@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_s - - conf = atmel_pin_config_read(pctldev, pin_id); - -+ /* Keep slew rate enabled by default. */ -+ if (atmel_pioctrl->slew_rate_support) -+ conf |= ATMEL_PIO_SR_MASK; -+ - for (i = 0; i < num_configs; i++) { - unsigned int param = pinconf_to_config_param(configs[i]); - unsigned int arg = pinconf_to_config_argument(configs[i]); -@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_s - dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n", - __func__, pin_id, configs[i]); - -- /* Keep slew rate enabled by default. */ -- if (atmel_pioctrl->slew_rate_support) -- conf |= ATMEL_PIO_SR_MASK; -- - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - conf &= (~ATMEL_PIO_PUEN_MASK); diff --git a/target/linux/at91/patches-5.15/155-media-atmel-properly-get-pm_runtime.patch b/target/linux/at91/patches-5.15/155-media-atmel-properly-get-pm_runtime.patch deleted file mode 100644 index 58f90db46d..0000000000 --- a/target/linux/at91/patches-5.15/155-media-atmel-properly-get-pm_runtime.patch +++ /dev/null @@ -1,159 +0,0 @@ -From c7660cc977621c4a14d870d523918df067f0db39 Mon Sep 17 00:00:00 2001 -From: Mauro Carvalho Chehab -Date: Fri, 23 Apr 2021 16:47:42 +0200 -Subject: [PATCH 155/247] media: atmel: properly get pm_runtime - -There are several issues in the way the atmel driver handles -pm_runtime_get_sync(): - -- it doesn't check return codes; -- it doesn't properly decrement the usage_count on all places; -- it starts streaming even if pm_runtime_get_sync() fails. -- while it tries to get pm_runtime at the clock enable logic, - it doesn't check if the operation was suceeded. - -Replace all occurrences of it to use the new kAPI: -pm_runtime_resume_and_get(), which ensures that, if the -return code is not negative, the usage_count was incremented. - -With that, add additional checks when this is called, in order -to ensure that errors will be properly addressed. - -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 30 ++++++++++++++----- - drivers/media/platform/atmel/atmel-isi.c | 19 +++++++++--- - 2 files changed, 38 insertions(+), 11 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct cl - static int isc_clk_prepare(struct clk_hw *hw) - { - struct isc_clk *isc_clk = to_isc_clk(hw); -+ int ret; - -- if (isc_clk->id == ISC_ISPCK) -- pm_runtime_get_sync(isc_clk->dev); -+ if (isc_clk->id == ISC_ISPCK) { -+ ret = pm_runtime_resume_and_get(isc_clk->dev); -+ if (ret < 0) -+ return ret; -+ } - - return isc_wait_clk_stable(hw); - } -@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk - { - struct isc_clk *isc_clk = to_isc_clk(hw); - u32 status; -+ int ret; - -- if (isc_clk->id == ISC_ISPCK) -- pm_runtime_get_sync(isc_clk->dev); -+ if (isc_clk->id == ISC_ISPCK) { -+ ret = pm_runtime_resume_and_get(isc_clk->dev); -+ if (ret < 0) -+ return 0; -+ } - - regmap_read(isc_clk->regmap, ISC_CLKSR, &status); - -@@ -807,7 +815,12 @@ static int isc_start_streaming(struct vb - goto err_start_stream; - } - -- pm_runtime_get_sync(isc->dev); -+ ret = pm_runtime_resume_and_get(isc->dev); -+ if (ret < 0) { -+ v4l2_err(&isc->v4l2_dev, "RPM resume failed in subdev %d\n", -+ ret); -+ goto err_pm_get; -+ } - - ret = isc_configure(isc); - if (unlikely(ret)) -@@ -838,7 +851,7 @@ static int isc_start_streaming(struct vb - - err_configure: - pm_runtime_put_sync(isc->dev); -- -+err_pm_get: - v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); - - err_start_stream: -@@ -1809,6 +1822,7 @@ static void isc_awb_work(struct work_str - u32 baysel; - unsigned long flags; - u32 min, max; -+ int ret; - - /* streaming is not active anymore */ - if (isc->stop) -@@ -1831,7 +1845,9 @@ static void isc_awb_work(struct work_str - ctrls->hist_id = hist_id; - baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT; - -- pm_runtime_get_sync(isc->dev); -+ ret = pm_runtime_resume_and_get(isc->dev); -+ if (ret < 0) -+ return; - - /* - * only update if we have all the required histograms and controls ---- a/drivers/media/platform/atmel/atmel-isi.c -+++ b/drivers/media/platform/atmel/atmel-isi.c -@@ -423,7 +423,9 @@ static int start_streaming(struct vb2_qu - struct frame_buffer *buf, *node; - int ret; - -- pm_runtime_get_sync(isi->dev); -+ ret = pm_runtime_resume_and_get(isi->dev); -+ if (ret < 0) -+ return ret; - - /* Enable stream on the sub device */ - ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1); -@@ -783,9 +785,10 @@ static int isi_enum_frameintervals(struc - return 0; - } - --static void isi_camera_set_bus_param(struct atmel_isi *isi) -+static int isi_camera_set_bus_param(struct atmel_isi *isi) - { - u32 cfg1 = 0; -+ int ret; - - /* set bus param for ISI */ - if (isi->pdata.hsync_act_low) -@@ -802,12 +805,16 @@ static void isi_camera_set_bus_param(str - cfg1 |= ISI_CFG1_THMASK_BEATS_16; - - /* Enable PM and peripheral clock before operate isi registers */ -- pm_runtime_get_sync(isi->dev); -+ ret = pm_runtime_resume_and_get(isi->dev); -+ if (ret < 0) -+ return ret; - - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - isi_writel(isi, ISI_CFG1, cfg1); - - pm_runtime_put(isi->dev); -+ -+ return 0; - } - - /* -----------------------------------------------------------------------*/ -@@ -1086,7 +1093,11 @@ static int isi_graph_notify_complete(str - dev_err(isi->dev, "No supported mediabus format found\n"); - return ret; - } -- isi_camera_set_bus_param(isi); -+ ret = isi_camera_set_bus_param(isi); -+ if (ret) { -+ dev_err(isi->dev, "Can't wake up device\n"); -+ return ret; -+ } - - ret = isi_set_default_fmt(isi); - if (ret) { diff --git a/target/linux/at91/patches-5.15/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch b/target/linux/at91/patches-5.15/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch deleted file mode 100644 index f8bdcbef23..0000000000 --- a/target/linux/at91/patches-5.15/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch +++ /dev/null @@ -1,32 +0,0 @@ -From b074b4695004b793a9199716295cb76da6c41686 Mon Sep 17 00:00:00 2001 -From: Jiapeng Chong -Date: Mon, 17 May 2021 12:07:48 +0200 -Subject: [PATCH 156/247] media: atmel: atmel-isc: Remove redundant assignment - to i - -Variable i is being assigned a value however the assignment is -never read, so this redundant assignment can be removed. - -Clean up the following clang-analyzer warning: - -drivers/media/platform/atmel/atmel-isc-base.c:975:2: warning: Value -stored to 'i' is never read [clang-analyzer-deadcode.DeadStores]. - -Reported-by: Abaci Robot -Signed-off-by: Jiapeng Chong -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -972,7 +972,6 @@ static int isc_enum_fmt_vid_cap(struct f - - index -= ARRAY_SIZE(controller_formats); - -- i = 0; - supported_index = 0; - - for (i = 0; i < ARRAY_SIZE(formats_list); i++) { diff --git a/target/linux/at91/patches-5.15/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch b/target/linux/at91/patches-5.15/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch deleted file mode 100644 index 6f2d5879c7..0000000000 --- a/target/linux/at91/patches-5.15/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch +++ /dev/null @@ -1,187 +0,0 @@ -From c3f54d192dc7344c5216a3628b67c4bbccbf8c3c Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:56:59 +0200 -Subject: [PATCH 157/247] media: atmel: atmel-isc: specialize gamma table into - product specific - -Separate the gamma table from the isc base file into the specific sama5d2 -product file. -Add a pointer to the gamma table and entries count inside the platform -driver specific struct. - -[hverkuil: made isc_sama5d2_gamma_table static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 47 ++----------------- - drivers/media/platform/atmel/atmel-isc.h | 11 +++-- - .../media/platform/atmel/atmel-sama5d2-isc.c | 45 ++++++++++++++++++ - 3 files changed, 56 insertions(+), 47 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -176,48 +176,6 @@ struct isc_format formats_list[] = { - - }; - --/* Gamma table with gamma 1/2.2 */ --const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES] = { -- /* 0 --> gamma 1/1.8 */ -- { 0x65, 0x66002F, 0x950025, 0xBB0020, 0xDB001D, 0xF8001A, -- 0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012, -- 0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F, -- 0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E, -- 0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C, -- 0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B, -- 0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A, -- 0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A, -- 0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A, -- 0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009, -- 0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 }, -- -- /* 1 --> gamma 1/2 */ -- { 0x7F, 0x800034, 0xB50028, 0xDE0021, 0x100001E, 0x11E001B, -- 0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013, -- 0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F, -- 0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D, -- 0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B, -- 0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A, -- 0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A, -- 0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009, -- 0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009, -- 0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009, -- 0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 }, -- -- /* 2 --> gamma 1/2.2 */ -- { 0x99, 0x9B0038, 0xD4002A, 0xFF0023, 0x122001F, 0x141001B, -- 0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012, -- 0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F, -- 0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C, -- 0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B, -- 0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A, -- 0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009, -- 0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009, -- 0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008, -- 0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007, -- 0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 }, --}; -- - #define ISC_IS_FORMAT_RAW(mbus_code) \ - (((mbus_code) & 0xf000) == 0x3000) - -@@ -691,7 +649,7 @@ static void isc_set_pipeline(struct isc_ - - regmap_write(regmap, ISC_CFA_CFG, bay_cfg | ISC_CFA_CFG_EITPOL); - -- gamma = &isc_gamma_table[ctrls->gamma_index][0]; -+ gamma = &isc->gamma_table[ctrls->gamma_index][0]; - regmap_bulk_write(regmap, ISC_GAM_BENTRY, gamma, GAMMA_ENTRIES); - regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES); - regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); -@@ -2085,7 +2043,8 @@ static int isc_ctrl_init(struct isc_devi - - v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0); - v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256); -- v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 2); -+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1, -+ isc->gamma_max); - isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops, - V4L2_CID_AUTO_WHITE_BALANCE, - 0, 1, 1, 1); ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -186,6 +186,10 @@ struct isc_ctrls { - * - * @current_subdev: current subdevice: the sensor - * @subdev_entities: list of subdevice entitites -+ * -+ * @gamma_table: pointer to the table with gamma values, has -+ * gamma_max sets of GAMMA_ENTRIES entries each -+ * @gamma_max: maximum number of sets of inside the gamma_table - */ - struct isc_device { - struct regmap *regmap; -@@ -244,16 +248,17 @@ struct isc_device { - struct v4l2_ctrl *gr_off_ctrl; - struct v4l2_ctrl *gb_off_ctrl; - }; --}; - --#define GAMMA_MAX 2 - #define GAMMA_ENTRIES 64 -+ /* pointer to the defined gamma table */ -+ const u32 (*gamma_table)[GAMMA_ENTRIES]; -+ u32 gamma_max; -+}; - - #define ATMEL_ISC_NAME "atmel-isc" - - extern struct isc_format formats_list[]; - extern const struct isc_format controller_formats[]; --extern const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES]; - extern const struct regmap_config isc_regmap_config; - extern const struct v4l2_async_notifier_operations isc_async_ops; - ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -54,6 +54,48 @@ - - #define ISC_CLK_MAX_DIV 255 - -+/* Gamma table with gamma 1/2.2 */ -+static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { -+ /* 0 --> gamma 1/1.8 */ -+ { 0x65, 0x66002F, 0x950025, 0xBB0020, 0xDB001D, 0xF8001A, -+ 0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012, -+ 0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F, -+ 0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E, -+ 0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C, -+ 0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B, -+ 0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A, -+ 0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A, -+ 0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A, -+ 0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009, -+ 0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 }, -+ -+ /* 1 --> gamma 1/2 */ -+ { 0x7F, 0x800034, 0xB50028, 0xDE0021, 0x100001E, 0x11E001B, -+ 0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013, -+ 0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F, -+ 0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D, -+ 0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B, -+ 0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A, -+ 0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A, -+ 0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009, -+ 0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009, -+ 0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009, -+ 0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 }, -+ -+ /* 2 --> gamma 1/2.2 */ -+ { 0x99, 0x9B0038, 0xD4002A, 0xFF0023, 0x122001F, 0x141001B, -+ 0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012, -+ 0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F, -+ 0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C, -+ 0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B, -+ 0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A, -+ 0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009, -+ 0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009, -+ 0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008, -+ 0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007, -+ 0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 }, -+}; -+ - static int isc_parse_dt(struct device *dev, struct isc_device *isc) - { - struct device_node *np = dev->of_node; -@@ -171,6 +213,9 @@ static int atmel_isc_probe(struct platfo - return ret; - } - -+ isc->gamma_table = isc_sama5d2_gamma_table; -+ isc->gamma_max = 2; -+ - ret = isc_pipeline_init(isc); - if (ret) - return ret; diff --git a/target/linux/at91/patches-5.15/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch b/target/linux/at91/patches-5.15/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch deleted file mode 100644 index 5fd7be8098..0000000000 --- a/target/linux/at91/patches-5.15/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 0576e163d93d08a1ed112bd23f40478ef3fd323d Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:00 +0200 -Subject: [PATCH 158/247] media: atmel: atmel-isc: specialize driver name - constant - -The driver name constant must defined based on product driver, thus moving -the constant directly where it's required. This will allow each ISC based -product to define it's own name. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 ++-- - drivers/media/platform/atmel/atmel-isc.h | 2 -- - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 4 ++-- - 3 files changed, 4 insertions(+), 6 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -909,7 +909,7 @@ static int isc_querycap(struct file *fil - { - struct isc_device *isc = video_drvdata(file); - -- strscpy(cap->driver, ATMEL_ISC_NAME, sizeof(cap->driver)); -+ strscpy(cap->driver, "microchip-isc", sizeof(cap->driver)); - strscpy(cap->card, "Atmel Image Sensor Controller", sizeof(cap->card)); - snprintf(cap->bus_info, sizeof(cap->bus_info), - "platform:%s", isc->v4l2_dev.name); -@@ -2261,7 +2261,7 @@ static int isc_async_complete(struct v4l - } - - /* Register video device */ -- strscpy(vdev->name, ATMEL_ISC_NAME, sizeof(vdev->name)); -+ strscpy(vdev->name, "microchip-isc", sizeof(vdev->name)); - vdev->release = video_device_release_empty; - vdev->fops = &isc_fops; - vdev->ioctl_ops = &isc_ioctl_ops; ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -255,8 +255,6 @@ struct isc_device { - u32 gamma_max; - }; - --#define ATMEL_ISC_NAME "atmel-isc" -- - extern struct isc_format formats_list[]; - extern const struct isc_format controller_formats[]; - extern const struct regmap_config isc_regmap_config; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -206,7 +206,7 @@ static int atmel_isc_probe(struct platfo - return irq; - - ret = devm_request_irq(dev, irq, isc_interrupt, 0, -- ATMEL_ISC_NAME, isc); -+ "atmel-sama5d2-isc", isc); - if (ret < 0) { - dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n", - irq, ret); -@@ -378,7 +378,7 @@ static struct platform_driver atmel_isc_ - .probe = atmel_isc_probe, - .remove = atmel_isc_remove, - .driver = { -- .name = ATMEL_ISC_NAME, -+ .name = "atmel-sama5d2-isc", - .pm = &atmel_isc_dev_pm_ops, - .of_match_table = of_match_ptr(atmel_isc_of_match), - }, diff --git a/target/linux/at91/patches-5.15/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch b/target/linux/at91/patches-5.15/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch deleted file mode 100644 index c6ca456a56..0000000000 --- a/target/linux/at91/patches-5.15/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch +++ /dev/null @@ -1,45 +0,0 @@ -From de8fa25cdf3726c83ac0d7b3b1e28bcb6334aadd Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:01 +0200 -Subject: [PATCH 159/247] media: atmel: atmel-isc: add checks for limiting - frame sizes - -When calling the subdev, certain subdev drivers will overwrite the -frame size and adding sizes which are beyond the ISC's capabilities. -Thus we need to ensure the frame size is cropped to the maximum caps. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -1338,6 +1338,12 @@ static int isc_try_fmt(struct isc_device - - v4l2_fill_pix_format(pixfmt, &format.format); - -+ /* Limit to Atmel ISC hardware capabilities */ -+ if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH) -+ pixfmt->width = ISC_MAX_SUPPORT_WIDTH; -+ if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) -+ pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; -+ - pixfmt->field = V4L2_FIELD_NONE; - pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3; - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; -@@ -1373,6 +1379,12 @@ static int isc_set_fmt(struct isc_device - if (ret < 0) - return ret; - -+ /* Limit to Atmel ISC hardware capabilities */ -+ if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH) -+ pixfmt->width = ISC_MAX_SUPPORT_WIDTH; -+ if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) -+ pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; -+ - isc->fmt = *f; - - if (isc->try_config.sd_format && isc->config.sd_format && diff --git a/target/linux/at91/patches-5.15/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch b/target/linux/at91/patches-5.15/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch deleted file mode 100644 index afa89ed916..0000000000 --- a/target/linux/at91/patches-5.15/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch +++ /dev/null @@ -1,131 +0,0 @@ -From b51819e17260af2ecc152b7dcd61e63bcaa35edf Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:02 +0200 -Subject: [PATCH 160/247] media: atmel: atmel-isc: specialize max width and max - height - -Move the max width and max height constants to the product specific driver -and have them in the device struct. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 28 +++++++++---------- - drivers/media/platform/atmel/atmel-isc.h | 9 ++++-- - .../media/platform/atmel/atmel-sama5d2-isc.c | 7 +++-- - 3 files changed, 25 insertions(+), 19 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -1216,8 +1216,8 @@ static void isc_try_fse(struct isc_devic - * just use the maximum ISC can receive. - */ - if (ret) { -- pad_cfg->try_crop.width = ISC_MAX_SUPPORT_WIDTH; -- pad_cfg->try_crop.height = ISC_MAX_SUPPORT_HEIGHT; -+ pad_cfg->try_crop.width = isc->max_width; -+ pad_cfg->try_crop.height = isc->max_height; - } else { - pad_cfg->try_crop.width = fse.max_width; - pad_cfg->try_crop.height = fse.max_height; -@@ -1294,10 +1294,10 @@ static int isc_try_fmt(struct isc_device - isc->try_config.sd_format = sd_fmt; - - /* Limit to Atmel ISC hardware capabilities */ -- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH) -- pixfmt->width = ISC_MAX_SUPPORT_WIDTH; -- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) -- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; -+ if (pixfmt->width > isc->max_width) -+ pixfmt->width = isc->max_width; -+ if (pixfmt->height > isc->max_height) -+ pixfmt->height = isc->max_height; - - /* - * The mbus format is the one the subdev outputs. -@@ -1339,10 +1339,10 @@ static int isc_try_fmt(struct isc_device - v4l2_fill_pix_format(pixfmt, &format.format); - - /* Limit to Atmel ISC hardware capabilities */ -- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH) -- pixfmt->width = ISC_MAX_SUPPORT_WIDTH; -- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) -- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; -+ if (pixfmt->width > isc->max_width) -+ pixfmt->width = isc->max_width; -+ if (pixfmt->height > isc->max_height) -+ pixfmt->height = isc->max_height; - - pixfmt->field = V4L2_FIELD_NONE; - pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3; -@@ -1380,10 +1380,10 @@ static int isc_set_fmt(struct isc_device - return ret; - - /* Limit to Atmel ISC hardware capabilities */ -- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH) -- pixfmt->width = ISC_MAX_SUPPORT_WIDTH; -- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) -- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; -+ if (f->fmt.pix.width > isc->max_width) -+ f->fmt.pix.width = isc->max_width; -+ if (f->fmt.pix.height > isc->max_height) -+ f->fmt.pix.height = isc->max_height; - - isc->fmt = *f; - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -10,9 +10,6 @@ - */ - #ifndef _ATMEL_ISC_H_ - --#define ISC_MAX_SUPPORT_WIDTH 2592 --#define ISC_MAX_SUPPORT_HEIGHT 1944 -- - #define ISC_CLK_MAX_DIV 255 - - enum isc_clk_id { -@@ -190,6 +187,9 @@ struct isc_ctrls { - * @gamma_table: pointer to the table with gamma values, has - * gamma_max sets of GAMMA_ENTRIES entries each - * @gamma_max: maximum number of sets of inside the gamma_table -+ * -+ * @max_width: maximum frame width, dependent on the internal RAM -+ * @max_height: maximum frame height, dependent on the internal RAM - */ - struct isc_device { - struct regmap *regmap; -@@ -253,6 +253,9 @@ struct isc_device { - /* pointer to the defined gamma table */ - const u32 (*gamma_table)[GAMMA_ENTRIES]; - u32 gamma_max; -+ -+ u32 max_width; -+ u32 max_height; - }; - - extern struct isc_format formats_list[]; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -49,8 +49,8 @@ - #include "atmel-isc-regs.h" - #include "atmel-isc.h" - --#define ISC_MAX_SUPPORT_WIDTH 2592 --#define ISC_MAX_SUPPORT_HEIGHT 1944 -+#define ISC_SAMA5D2_MAX_SUPPORT_WIDTH 2592 -+#define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT 1944 - - #define ISC_CLK_MAX_DIV 255 - -@@ -216,6 +216,9 @@ static int atmel_isc_probe(struct platfo - isc->gamma_table = isc_sama5d2_gamma_table; - isc->gamma_max = 2; - -+ isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH; -+ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT; -+ - ret = isc_pipeline_init(isc); - if (ret) - return ret; diff --git a/target/linux/at91/patches-5.15/161-media-atmel-atmel-isc-specialize-dma-cfg.patch b/target/linux/at91/patches-5.15/161-media-atmel-atmel-isc-specialize-dma-cfg.patch deleted file mode 100644 index 410831771e..0000000000 --- a/target/linux/at91/patches-5.15/161-media-atmel-atmel-isc-specialize-dma-cfg.patch +++ /dev/null @@ -1,60 +0,0 @@ -From c42305f52560a1be6fc25a2f23579c7b323de654 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:03 +0200 -Subject: [PATCH 161/247] media: atmel: atmel-isc: specialize dma cfg - -The dma configuration (DCFG) is specific to the product. -Move this configuration in the product specific driver, and add the -field inside the driver struct. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 3 +-- - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 3 +++ - 3 files changed, 6 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -724,8 +724,7 @@ static int isc_configure(struct isc_devi - rlp_mode = isc->config.rlp_cfg_mode; - pipeline = isc->config.bits_pipeline; - -- dcfg = isc->config.dcfg_imode | -- ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; -+ dcfg = isc->config.dcfg_imode | isc->dcfg; - - pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE; - mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW | ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -149,6 +149,7 @@ struct isc_ctrls { - * @hclock: Hclock clock input (refer datasheet) - * @ispck: iscpck clock (refer datasheet) - * @isc_clks: ISC clocks -+ * @dcfg: DMA master configuration, architecture dependent - * - * @dev: Registered device driver - * @v4l2_dev: v4l2 registered device -@@ -196,6 +197,7 @@ struct isc_device { - struct clk *hclock; - struct clk *ispck; - struct isc_clk isc_clks[2]; -+ u32 dcfg; - - struct device *dev; - struct v4l2_device v4l2_dev; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -219,6 +219,9 @@ static int atmel_isc_probe(struct platfo - isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH; - isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT; - -+ /* sama5d2-isc - 8 bits per beat */ -+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; -+ - ret = isc_pipeline_init(isc); - if (ret) - return ret; diff --git a/target/linux/at91/patches-5.15/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch b/target/linux/at91/patches-5.15/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch deleted file mode 100644 index 7b8e8ed697..0000000000 --- a/target/linux/at91/patches-5.15/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 6ccda3cf6a102ac4f6e21386d0dd0fedfb066525 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:04 +0200 -Subject: [PATCH 162/247] media: atmel: atmel-isc: extract CSC submodule config - into separate function - -The CSC submodule is a part of the atmel-isc pipeline, and stands for -Color Space Conversion. It is used to apply a matrix transformation to -RGB pixels to convert them to the YUV components. -The CSC submodule should be initialized in the product specific driver -as it's product specific. Other products can implement it differently. - -[hverkuil: made isc_sama5d2_config_csc static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 8 +------- - drivers/media/platform/atmel/atmel-isc.h | 7 +++++++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 15 +++++++++++++++ - 3 files changed, 23 insertions(+), 7 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -654,13 +654,7 @@ static void isc_set_pipeline(struct isc_ - regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES); - regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); - -- /* Convert RGB to YUV */ -- regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16)); -- regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16)); -- regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16)); -- regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16)); -- regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16)); -- regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16)); -+ isc->config_csc(isc); - - regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness); - regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast); ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -191,6 +191,9 @@ struct isc_ctrls { - * - * @max_width: maximum frame width, dependent on the internal RAM - * @max_height: maximum frame height, dependent on the internal RAM -+ * -+ * @config_csc: pointer to a function that initializes product -+ * specific CSC module - */ - struct isc_device { - struct regmap *regmap; -@@ -258,6 +261,10 @@ struct isc_device { - - u32 max_width; - u32 max_height; -+ -+ struct { -+ void (*config_csc)(struct isc_device *isc); -+ }; - }; - - extern struct isc_format formats_list[]; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -54,6 +54,19 @@ - - #define ISC_CLK_MAX_DIV 255 - -+static void isc_sama5d2_config_csc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ /* Convert RGB to YUV */ -+ regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16)); -+ regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16)); -+ regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16)); -+ regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16)); -+ regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16)); -+ regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16)); -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -219,6 +232,8 @@ static int atmel_isc_probe(struct platfo - isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH; - isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT; - -+ isc->config_csc = isc_sama5d2_config_csc; -+ - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; - diff --git a/target/linux/at91/patches-5.15/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch b/target/linux/at91/patches-5.15/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch deleted file mode 100644 index 832465363b..0000000000 --- a/target/linux/at91/patches-5.15/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 19dd7c72c6c457c147133a7dad8ab28d35538f99 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:05 +0200 -Subject: [PATCH 163/247] media: atmel: atmel-isc-base: add id to clock debug - message - -Add the clock id to the debug message regarding clock setup - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -281,8 +281,8 @@ static int isc_clk_enable(struct clk_hw - unsigned long flags; - unsigned int status; - -- dev_dbg(isc_clk->dev, "ISC CLK: %s, div = %d, parent id = %d\n", -- __func__, isc_clk->div, isc_clk->parent_id); -+ dev_dbg(isc_clk->dev, "ISC CLK: %s, id = %d, div = %d, parent id = %d\n", -+ __func__, id, isc_clk->div, isc_clk->parent_id); - - spin_lock_irqsave(&isc_clk->lock, flags); - regmap_update_bits(regmap, ISC_CLKCFG, diff --git a/target/linux/at91/patches-5.15/164-media-atmel-atmel-isc-create-register-offsets-struct.patch b/target/linux/at91/patches-5.15/164-media-atmel-atmel-isc-create-register-offsets-struct.patch deleted file mode 100644 index bb599618d1..0000000000 --- a/target/linux/at91/patches-5.15/164-media-atmel-atmel-isc-create-register-offsets-struct.patch +++ /dev/null @@ -1,115 +0,0 @@ -From 7a1b082cd81a2496e2687cee7ea1ef04a3020f48 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:06 +0200 -Subject: [PATCH 164/247] media: atmel: atmel-isc: create register offsets - struct - -Create a struct that holds register offsets that are product specific. -Add initially the CSC register. -This allows each product that contains a variant of the ISC to add their -own register offset. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 2 +- - drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++ - drivers/media/platform/atmel/atmel-isc.h | 12 +++++++++++ - .../media/platform/atmel/atmel-sama5d2-isc.c | 20 +++++++++++++------ - 4 files changed, 30 insertions(+), 7 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -2326,7 +2326,7 @@ int isc_pipeline_init(struct isc_device - REG_FIELD(ISC_GAM_CTRL, 1, 1), - REG_FIELD(ISC_GAM_CTRL, 2, 2), - REG_FIELD(ISC_GAM_CTRL, 3, 3), -- REG_FIELD(ISC_CSC_CTRL, 0, 0), -+ REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0), - REG_FIELD(ISC_CBC_CTRL, 0, 0), - REG_FIELD(ISC_SUB422_CTRL, 0, 0), - REG_FIELD(ISC_SUB420_CTRL, 0, 0), ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -153,6 +153,9 @@ - /* ISC_Gamma Correction Green Entry Register */ - #define ISC_GAM_RENTRY 0x00000298 - -+/* Offset for CSC register specific to sama5d2 product */ -+#define ISC_SAMA5D2_CSC_OFFSET 0 -+ - /* Color Space Conversion Control Register */ - #define ISC_CSC_CTRL 0x00000398 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -144,6 +144,14 @@ struct isc_ctrls { - #define ISC_PIPE_LINE_NODE_NUM 11 - - /* -+ * struct isc_reg_offsets - ISC device register offsets -+ * @csc: Offset for the CSC register -+ */ -+struct isc_reg_offsets { -+ u32 csc; -+}; -+ -+/* - * struct isc_device - ISC device driver data/config struct - * @regmap: Register map - * @hclock: Hclock clock input (refer datasheet) -@@ -194,6 +202,8 @@ struct isc_ctrls { - * - * @config_csc: pointer to a function that initializes product - * specific CSC module -+ * -+ * @offsets: struct holding the product specific register offsets - */ - struct isc_device { - struct regmap *regmap; -@@ -265,6 +275,8 @@ struct isc_device { - struct { - void (*config_csc)(struct isc_device *isc); - }; -+ -+ struct isc_reg_offsets offsets; - }; - - extern struct isc_format formats_list[]; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -59,12 +59,18 @@ static void isc_sama5d2_config_csc(struc - struct regmap *regmap = isc->regmap; - - /* Convert RGB to YUV */ -- regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16)); -- regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16)); -- regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16)); -- regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16)); -- regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16)); -- regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16)); -+ regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc, -+ 0x42 | (0x81 << 16)); -+ regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc, -+ 0x19 | (0x10 << 16)); -+ regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc, -+ 0xFDA | (0xFB6 << 16)); -+ regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc, -+ 0x70 | (0x80 << 16)); -+ regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc, -+ 0x70 | (0xFA2 << 16)); -+ regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc, -+ 0xFEE | (0x80 << 16)); - } - - /* Gamma table with gamma 1/2.2 */ -@@ -234,6 +240,8 @@ static int atmel_isc_probe(struct platfo - - isc->config_csc = isc_sama5d2_config_csc; - -+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; -+ - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; - diff --git a/target/linux/at91/patches-5.15/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch b/target/linux/at91/patches-5.15/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch deleted file mode 100644 index fd7ed1e94d..0000000000 --- a/target/linux/at91/patches-5.15/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch +++ /dev/null @@ -1,80 +0,0 @@ -From aa31e58d80d233385fa3b972e6b85f293e2a9093 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:07 +0200 -Subject: [PATCH 165/247] media: atmel: atmel-isc: extract CBC submodule config - into separate function - -The CBC submodule is a part of the atmel-isc pipeline, and stands for -Contrast Brightness Control. It is used to apply gains and offsets to the -luma (Y) and chroma (U, V) components of the YUV elements. -The CBC submodule should be initialized in the product specific driver -as it's product specific. Other products can implement it differently - -[hverkuil: made isc_sama5d2_config_cbc static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 +--- - drivers/media/platform/atmel/atmel-isc.h | 3 +++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 9 +++++++++ - 3 files changed, 13 insertions(+), 3 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -655,9 +655,7 @@ static void isc_set_pipeline(struct isc_ - regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); - - isc->config_csc(isc); -- -- regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness); -- regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast); -+ isc->config_cbc(isc); - } - - static int isc_update_profile(struct isc_device *isc) ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -202,6 +202,8 @@ struct isc_reg_offsets { - * - * @config_csc: pointer to a function that initializes product - * specific CSC module -+ * @config_cbc: pointer to a function that initializes product -+ * specific CBC module - * - * @offsets: struct holding the product specific register offsets - */ -@@ -274,6 +276,7 @@ struct isc_device { - - struct { - void (*config_csc)(struct isc_device *isc); -+ void (*config_cbc)(struct isc_device *isc); - }; - - struct isc_reg_offsets offsets; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -73,6 +73,14 @@ static void isc_sama5d2_config_csc(struc - 0xFEE | (0x80 << 16)); - } - -+static void isc_sama5d2_config_cbc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness); -+ regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast); -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -239,6 +247,7 @@ static int atmel_isc_probe(struct platfo - isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT; - - isc->config_csc = isc_sama5d2_config_csc; -+ isc->config_cbc = isc_sama5d2_config_cbc; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; - diff --git a/target/linux/at91/patches-5.15/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch b/target/linux/at91/patches-5.15/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch deleted file mode 100644 index 51659f54a4..0000000000 --- a/target/linux/at91/patches-5.15/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 52e4b779ae1af3e322d0c673375dcd51315739d4 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:08 +0200 -Subject: [PATCH 166/247] media: atmel: atmel-isc: add CBC to the reg offsets - struct - -The CBC submodule is a part of the atmel-isc pipeline, and stands for -Contrast Brightness Control. It is used to apply gains and offsets to the -luma (Y) and chroma (U, V) components of the YUV elements. -Add cbc to the reg offsets struct. This will allow different products -to have a different reg offset for this particular module. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 2 +- - drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 7 +++++-- - 4 files changed, 11 insertions(+), 3 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -2325,7 +2325,7 @@ int isc_pipeline_init(struct isc_device - REG_FIELD(ISC_GAM_CTRL, 2, 2), - REG_FIELD(ISC_GAM_CTRL, 3, 3), - REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0), -- REG_FIELD(ISC_CBC_CTRL, 0, 0), -+ REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0), - REG_FIELD(ISC_SUB422_CTRL, 0, 0), - REG_FIELD(ISC_SUB420_CTRL, 0, 0), - }; ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -177,6 +177,9 @@ - /* Color Space Conversion CRB OCR Register */ - #define ISC_CSC_CRB_OCR 0x000003b0 - -+/* Offset for CBC register specific to sama5d2 product */ -+#define ISC_SAMA5D2_CBC_OFFSET 0 -+ - /* Contrast And Brightness Control Register */ - #define ISC_CBC_CTRL 0x000003b4 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -146,9 +146,11 @@ struct isc_ctrls { - /* - * struct isc_reg_offsets - ISC device register offsets - * @csc: Offset for the CSC register -+ * @cbc: Offset for the CBC register - */ - struct isc_reg_offsets { - u32 csc; -+ u32 cbc; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -77,8 +77,10 @@ static void isc_sama5d2_config_cbc(struc - { - struct regmap *regmap = isc->regmap; - -- regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness); -- regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast); -+ regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc, -+ isc->ctrls.brightness); -+ regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc, -+ isc->ctrls.contrast); - } - - /* Gamma table with gamma 1/2.2 */ -@@ -250,6 +252,7 @@ static int atmel_isc_probe(struct platfo - isc->config_cbc = isc_sama5d2_config_cbc; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; -+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch b/target/linux/at91/patches-5.15/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch deleted file mode 100644 index 6d937fdeb7..0000000000 --- a/target/linux/at91/patches-5.15/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch +++ /dev/null @@ -1,80 +0,0 @@ -From aebb741058a63c3493f4139d11d6f290d5691e9b Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:09 +0200 -Subject: [PATCH 167/247] media: atmel: atmel-isc: add SUB422 and SUB420 to - register offsets - -The SUB submodules are a part of the atmel-isc pipeline, and stand for -Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio -aspect to either 4:2:2 or 4:2:0. -Add sub420 and sub422 to the reg offsets struct. -This will allow different products to have a different reg offset for these -particular modules. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 ++-- - drivers/media/platform/atmel/atmel-isc-regs.h | 4 ++++ - drivers/media/platform/atmel/atmel-isc.h | 4 ++++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 ++ - 4 files changed, 12 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -2326,8 +2326,8 @@ int isc_pipeline_init(struct isc_device - REG_FIELD(ISC_GAM_CTRL, 3, 3), - REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0), - REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0), -- REG_FIELD(ISC_SUB422_CTRL, 0, 0), -- REG_FIELD(ISC_SUB420_CTRL, 0, 0), -+ REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0), -+ REG_FIELD(ISC_SUB420_CTRL + isc->offsets.sub420, 0, 0), - }; - - for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) { ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -194,9 +194,13 @@ - #define ISC_CBC_CONTRAST 0x000003c0 - #define ISC_CBC_CONTRAST_MASK GENMASK(11, 0) - -+/* Offset for SUB422 register specific to sama5d2 product */ -+#define ISC_SAMA5D2_SUB422_OFFSET 0 - /* Subsampling 4:4:4 to 4:2:2 Control Register */ - #define ISC_SUB422_CTRL 0x000003c4 - -+/* Offset for SUB420 register specific to sama5d2 product */ -+#define ISC_SAMA5D2_SUB420_OFFSET 0 - /* Subsampling 4:2:2 to 4:2:0 Control Register */ - #define ISC_SUB420_CTRL 0x000003cc - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -147,10 +147,14 @@ struct isc_ctrls { - * struct isc_reg_offsets - ISC device register offsets - * @csc: Offset for the CSC register - * @cbc: Offset for the CBC register -+ * @sub422: Offset for the SUB422 register -+ * @sub420: Offset for the SUB420 register - */ - struct isc_reg_offsets { - u32 csc; - u32 cbc; -+ u32 sub422; -+ u32 sub420; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -253,6 +253,8 @@ static int atmel_isc_probe(struct platfo - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; - isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; -+ isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET; -+ isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch b/target/linux/at91/patches-5.15/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch deleted file mode 100644 index 050e2816c0..0000000000 --- a/target/linux/at91/patches-5.15/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch +++ /dev/null @@ -1,74 +0,0 @@ -From b432a8b0fc88de5b49236482053d8d372c68ee55 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:10 +0200 -Subject: [PATCH 168/247] media: atmel: atmel-isc: add RLP to register offsets - -The RLP submodule is a part of the atmel-isc pipeline, and stands for -Rounding,Limiting and Packaging. It used to extract specific data from the -ISC pipeline. For example if we want to output greyscale 8 bit, we would -use limiting to 8 bits, and packaging to Luma component only. -Add rlp to the reg offsets struct. -This will allow different products to have a different reg offset for this -particular module. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 ++-- - drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 + - 4 files changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -726,8 +726,8 @@ static int isc_configure(struct isc_devi - - regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0); - -- regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK, -- rlp_mode); -+ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, -+ ISC_RLP_CFG_MODE_MASK, rlp_mode); - - regmap_write(regmap, ISC_DCFG, dcfg); - ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -204,6 +204,8 @@ - /* Subsampling 4:2:2 to 4:2:0 Control Register */ - #define ISC_SUB420_CTRL 0x000003cc - -+/* Offset for RLP register specific to sama5d2 product */ -+#define ISC_SAMA5D2_RLP_OFFSET 0 - /* Rounding, Limiting and Packing Configuration Register */ - #define ISC_RLP_CFG 0x000003d0 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -149,12 +149,14 @@ struct isc_ctrls { - * @cbc: Offset for the CBC register - * @sub422: Offset for the SUB422 register - * @sub420: Offset for the SUB420 register -+ * @rlp: Offset for the RLP register - */ - struct isc_reg_offsets { - u32 csc; - u32 cbc; - u32 sub422; - u32 sub420; -+ u32 rlp; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -255,6 +255,7 @@ static int atmel_isc_probe(struct platfo - isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; - isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET; - isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET; -+ isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch b/target/linux/at91/patches-5.15/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch deleted file mode 100644 index 6ce49e67ff..0000000000 --- a/target/linux/at91/patches-5.15/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 8c19aa14b8303a0e7c4bae42f3f00f9a2a65b0db Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:11 +0200 -Subject: [PATCH 169/247] media: atmel: atmel-isc: add HIS to register offsets - -The HIS submodule is a part of the atmel-isc pipeline, and stands for -Histogram. This module performs a color histogram that can be read and used -by the main processor. -Add his to the reg offsets struct. -This will allow different products to have a different reg offset for this -particular module. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++---- - drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 + - 4 files changed, 12 insertions(+), 4 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -686,12 +686,13 @@ static void isc_set_histogram(struct isc - struct isc_ctrls *ctrls = &isc->ctrls; - - if (enable) { -- regmap_write(regmap, ISC_HIS_CFG, -+ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his, - ISC_HIS_CFG_MODE_GR | - (isc->config.sd_format->cfa_baycfg - << ISC_HIS_CFG_BAYSEL_SHIFT) | - ISC_HIS_CFG_RAR); -- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN); -+ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his, -+ ISC_HIS_CTRL_EN); - regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE); - ctrls->hist_id = ISC_HIS_CFG_MODE_GR; - isc_update_profile(isc); -@@ -700,7 +701,8 @@ static void isc_set_histogram(struct isc - ctrls->hist_stat = HIST_ENABLED; - } else { - regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE); -- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_DIS); -+ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his, -+ ISC_HIS_CTRL_DIS); - - ctrls->hist_stat = HIST_DISABLED; - } -@@ -1836,7 +1838,8 @@ static void isc_awb_work(struct work_str - ctrls->awb = ISC_WB_NONE; - } - } -- regmap_write(regmap, ISC_HIS_CFG, hist_id | baysel | ISC_HIS_CFG_RAR); -+ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his, -+ hist_id | baysel | ISC_HIS_CFG_RAR); - isc_update_profile(isc); - /* if awb has been disabled, we don't need to start another histogram */ - if (ctrls->awb) ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -224,6 +224,8 @@ - #define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc - #define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0) - -+/* Offset for HIS register specific to sama5d2 product */ -+#define ISC_SAMA5D2_HIS_OFFSET 0 - /* Histogram Control Register */ - #define ISC_HIS_CTRL 0x000003d4 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -150,6 +150,7 @@ struct isc_ctrls { - * @sub422: Offset for the SUB422 register - * @sub420: Offset for the SUB420 register - * @rlp: Offset for the RLP register -+ * @his: Offset for the HIS related registers - */ - struct isc_reg_offsets { - u32 csc; -@@ -157,6 +158,7 @@ struct isc_reg_offsets { - u32 sub422; - u32 sub420; - u32 rlp; -+ u32 his; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -256,6 +256,7 @@ static int atmel_isc_probe(struct platfo - isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET; - isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET; - isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET; -+ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch b/target/linux/at91/patches-5.15/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch deleted file mode 100644 index ef7104e587..0000000000 --- a/target/linux/at91/patches-5.15/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 7173e54070a9b530c8c16e0a507be71385133abd Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:12 +0200 -Subject: [PATCH 170/247] media: atmel: atmel-isc: add DMA to register offsets - -The DMA submodule is a part of the atmel-isc pipeline, and stands for -Direct Memory Access. It acts like a master on the AXI bus of the SoC, and -can directly write the RAM area with the pixel data from the ISC internal -sram. -Add dma to the reg offsets struct. -This will allow different products to have a different reg offset for this -particular module. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 19 ++++++++++++------- - drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - .../media/platform/atmel/atmel-sama5d2-isc.c | 1 + - 4 files changed, 18 insertions(+), 7 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -601,16 +601,20 @@ static void isc_start_dma(struct isc_dev - ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN); - - addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); -- regmap_write(regmap, ISC_DAD0, addr0); -+ regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0); - - switch (isc->config.fourcc) { - case V4L2_PIX_FMT_YUV420: -- regmap_write(regmap, ISC_DAD1, addr0 + (sizeimage * 2) / 3); -- regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 5) / 6); -+ regmap_write(regmap, ISC_DAD1 + isc->offsets.dma, -+ addr0 + (sizeimage * 2) / 3); -+ regmap_write(regmap, ISC_DAD2 + isc->offsets.dma, -+ addr0 + (sizeimage * 5) / 6); - break; - case V4L2_PIX_FMT_YUV422P: -- regmap_write(regmap, ISC_DAD1, addr0 + sizeimage / 2); -- regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 3) / 4); -+ regmap_write(regmap, ISC_DAD1 + isc->offsets.dma, -+ addr0 + sizeimage / 2); -+ regmap_write(regmap, ISC_DAD2 + isc->offsets.dma, -+ addr0 + (sizeimage * 3) / 4); - break; - default: - break; -@@ -618,7 +622,8 @@ static void isc_start_dma(struct isc_dev - - dctrl_dview = isc->config.dctrl_dview; - -- regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS); -+ regmap_write(regmap, ISC_DCTRL + isc->offsets.dma, -+ dctrl_dview | ISC_DCTRL_IE_IS); - spin_lock(&isc->awb_lock); - regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE); - spin_unlock(&isc->awb_lock); -@@ -731,7 +736,7 @@ static int isc_configure(struct isc_devi - regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, - ISC_RLP_CFG_MODE_MASK, rlp_mode); - -- regmap_write(regmap, ISC_DCFG, dcfg); -+ regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg); - - /* Set the pipeline */ - isc_set_pipeline(isc, pipeline); ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -247,6 +247,9 @@ - - #define ISC_HIS_CFG_RAR BIT(8) - -+/* Offset for DMA register specific to sama5d2 product */ -+#define ISC_SAMA5D2_DMA_OFFSET 0 -+ - /* DMA Configuration Register */ - #define ISC_DCFG 0x000003e0 - #define ISC_DCFG_IMODE_PACKED8 0x0 ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -151,6 +151,7 @@ struct isc_ctrls { - * @sub420: Offset for the SUB420 register - * @rlp: Offset for the RLP register - * @his: Offset for the HIS related registers -+ * @dma: Offset for the DMA related registers - */ - struct isc_reg_offsets { - u32 csc; -@@ -159,6 +160,7 @@ struct isc_reg_offsets { - u32 sub420; - u32 rlp; - u32 his; -+ u32 dma; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -257,6 +257,7 @@ static int atmel_isc_probe(struct platfo - isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET; - isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET; - isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET; -+ isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/171-media-atmel-atmel-isc-add-support-for-version-regist.patch b/target/linux/at91/patches-5.15/171-media-atmel-atmel-isc-add-support-for-version-regist.patch deleted file mode 100644 index b582945b99..0000000000 --- a/target/linux/at91/patches-5.15/171-media-atmel-atmel-isc-add-support-for-version-regist.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 0939b0a92acca11a5a3b0de5dd70434e17e40ed3 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:13 +0200 -Subject: [PATCH 171/247] media: atmel: atmel-isc: add support for version - register - -Add support for version register and print it at probe time. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-regs.h | 5 +++++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 5 +++++ - 3 files changed, 12 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -295,6 +295,11 @@ - /* DMA Address 2 Register */ - #define ISC_DAD2 0x000003fc - -+/* Offset for version register specific to sama5d2 product */ -+#define ISC_SAMA5D2_VERSION_OFFSET 0 -+/* Version Register */ -+#define ISC_VERSION 0x0000040c -+ - /* Histogram Entry */ - #define ISC_HIS_ENTRY 0x00000410 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -152,6 +152,7 @@ struct isc_ctrls { - * @rlp: Offset for the RLP register - * @his: Offset for the HIS related registers - * @dma: Offset for the DMA related registers -+ * @version: Offset for the version register - */ - struct isc_reg_offsets { - u32 csc; -@@ -161,6 +162,7 @@ struct isc_reg_offsets { - u32 rlp; - u32 his; - u32 dma; -+ u32 version; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -210,6 +210,7 @@ static int atmel_isc_probe(struct platfo - struct isc_subdev_entity *subdev_entity; - int irq; - int ret; -+ u32 ver; - - isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL); - if (!isc) -@@ -258,6 +259,7 @@ static int atmel_isc_probe(struct platfo - isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET; - isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET; - isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET; -+ isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; -@@ -346,6 +348,9 @@ static int atmel_isc_probe(struct platfo - pm_runtime_enable(dev); - pm_request_idle(dev); - -+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); -+ dev_info(dev, "Microchip ISC version %x\n", ver); -+ - return 0; - - cleanup_subdev: diff --git a/target/linux/at91/patches-5.15/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch b/target/linux/at91/patches-5.15/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch deleted file mode 100644 index c48301cf25..0000000000 --- a/target/linux/at91/patches-5.15/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch +++ /dev/null @@ -1,71 +0,0 @@ -From bce46a8a620a796ca3cfe5bff61baf6744074986 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:14 +0200 -Subject: [PATCH 172/247] media: atmel: atmel-isc: add his_entry to register - offsets - -Add his_entry to the reg offsets struct. -This will allow different products to have a different reg offset for this -particular module. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 3 ++- - drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++ - drivers/media/platform/atmel/atmel-isc.h | 2 ++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 + - 4 files changed, 7 insertions(+), 1 deletion(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -1684,7 +1684,8 @@ static void isc_hist_count(struct isc_de - *min = 0; - *max = HIST_ENTRIES; - -- regmap_bulk_read(regmap, ISC_HIS_ENTRY, hist_entry, HIST_ENTRIES); -+ regmap_bulk_read(regmap, ISC_HIS_ENTRY + isc->offsets.his_entry, -+ hist_entry, HIST_ENTRIES); - - *hist_count = 0; - /* ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -300,6 +300,8 @@ - /* Version Register */ - #define ISC_VERSION 0x0000040c - -+/* Offset for version register specific to sama5d2 product */ -+#define ISC_SAMA5D2_HIS_ENTRY_OFFSET 0 - /* Histogram Entry */ - #define ISC_HIS_ENTRY 0x00000410 - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -153,6 +153,7 @@ struct isc_ctrls { - * @his: Offset for the HIS related registers - * @dma: Offset for the DMA related registers - * @version: Offset for the version register -+ * @his_entry: Offset for the HIS entries registers - */ - struct isc_reg_offsets { - u32 csc; -@@ -163,6 +164,7 @@ struct isc_reg_offsets { - u32 his; - u32 dma; - u32 version; -+ u32 his_entry; - }; - - /* ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -260,6 +260,7 @@ static int atmel_isc_probe(struct platfo - isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET; - isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET; - isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET; -+ isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET; - - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; diff --git a/target/linux/at91/patches-5.15/173-media-atmel-atmel-isc-add-register-description-for-a.patch b/target/linux/at91/patches-5.15/173-media-atmel-atmel-isc-add-register-description-for-a.patch deleted file mode 100644 index f701ede09c..0000000000 --- a/target/linux/at91/patches-5.15/173-media-atmel-atmel-isc-add-register-description-for-a.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 87b581b1197df5f77bd65819d0428f2404c6b764 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:15 +0200 -Subject: [PATCH 173/247] media: atmel: atmel-isc: add register description for - additional modules - -Add register description for additional pipeline modules: the -Defective Pixel Correction (DPC) and the Vertical and Horizontal Scaler(VHXS) - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-regs.h | 67 +++++++++++++++++++ - 1 file changed, 67 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -90,6 +90,46 @@ - #define ISC_INT_DDONE BIT(8) - #define ISC_INT_HISDONE BIT(12) - -+/* ISC DPC Control Register */ -+#define ISC_DPC_CTRL 0x40 -+ -+#define ISC_DPC_CTRL_DPCEN BIT(0) -+#define ISC_DPC_CTRL_GDCEN BIT(1) -+#define ISC_DPC_CTRL_BLCEN BIT(2) -+ -+/* ISC DPC Config Register */ -+#define ISC_DPC_CFG 0x44 -+ -+#define ISC_DPC_CFG_BAYSEL_SHIFT 0 -+ -+#define ISC_DPC_CFG_EITPOL BIT(4) -+ -+#define ISC_DPC_CFG_TA_ENABLE BIT(14) -+#define ISC_DPC_CFG_TC_ENABLE BIT(13) -+#define ISC_DPC_CFG_TM_ENABLE BIT(12) -+ -+#define ISC_DPC_CFG_RE_MODE BIT(17) -+ -+#define ISC_DPC_CFG_GDCCLP_SHIFT 20 -+#define ISC_DPC_CFG_GDCCLP_MASK GENMASK(22, 20) -+ -+#define ISC_DPC_CFG_BLOFF_SHIFT 24 -+#define ISC_DPC_CFG_BLOFF_MASK GENMASK(31, 24) -+ -+#define ISC_DPC_CFG_BAYCFG_SHIFT 0 -+#define ISC_DPC_CFG_BAYCFG_MASK GENMASK(1, 0) -+/* ISC DPC Threshold Median Register */ -+#define ISC_DPC_THRESHM 0x48 -+ -+/* ISC DPC Threshold Closest Register */ -+#define ISC_DPC_THRESHC 0x4C -+ -+/* ISC DPC Threshold Average Register */ -+#define ISC_DPC_THRESHA 0x50 -+ -+/* ISC DPC STatus Register */ -+#define ISC_DPC_SR 0x54 -+ - /* ISC White Balance Control Register */ - #define ISC_WB_CTRL 0x00000058 - -@@ -153,6 +193,33 @@ - /* ISC_Gamma Correction Green Entry Register */ - #define ISC_GAM_RENTRY 0x00000298 - -+/* ISC VHXS Control Register */ -+#define ISC_VHXS_CTRL 0x398 -+ -+/* ISC VHXS Source Size Register */ -+#define ISC_VHXS_SS 0x39C -+ -+/* ISC VHXS Destination Size Register */ -+#define ISC_VHXS_DS 0x3A0 -+ -+/* ISC Vertical Factor Register */ -+#define ISC_VXS_FACT 0x3a4 -+ -+/* ISC Horizontal Factor Register */ -+#define ISC_HXS_FACT 0x3a8 -+ -+/* ISC Vertical Config Register */ -+#define ISC_VXS_CFG 0x3ac -+ -+/* ISC Horizontal Config Register */ -+#define ISC_HXS_CFG 0x3b0 -+ -+/* ISC Vertical Tap Register */ -+#define ISC_VXS_TAP 0x3b4 -+ -+/* ISC Horizontal Tap Register */ -+#define ISC_HXS_TAP 0x434 -+ - /* Offset for CSC register specific to sama5d2 product */ - #define ISC_SAMA5D2_CSC_OFFSET 0 - diff --git a/target/linux/at91/patches-5.15/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch b/target/linux/at91/patches-5.15/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch deleted file mode 100644 index 7cb5233c2e..0000000000 --- a/target/linux/at91/patches-5.15/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 58a6cc3c7eecd16208cd16b92b4eaf8385e69696 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:16 +0200 -Subject: [PATCH 174/247] media: atmel: atmel-isc: extend pipeline with extra - modules - -Newer ISC pipelines have the additional modules of -Defective Pixel Correction -> DPC itself, -Defective Pixel Correction -> Green Disparity Correction (DPC_GDC) -Defective Pixel Correction -> Black Level Correction (DPC_BLC) -Vertical and Horizontal Scaler -> VHXS - -Some products have this full pipeline (sama7g5), other products do not (sama5d2) - -Add the modules to the isc base, and also extend the register range to include -the modules. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 11 ++++++-- - drivers/media/platform/atmel/atmel-isc.h | 28 +++++++++++-------- - 2 files changed, 25 insertions(+), 14 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -2324,8 +2324,14 @@ int isc_pipeline_init(struct isc_device - struct regmap_field *regs; - unsigned int i; - -- /* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */ -+ /* -+ * DPCEN-->GDCEN-->BLCEN-->WB-->CFA-->CC--> -+ * GAM-->VHXS-->CSC-->CBC-->SUB422-->SUB420 -+ */ - const struct reg_field regfields[ISC_PIPE_LINE_NODE_NUM] = { -+ REG_FIELD(ISC_DPC_CTRL, 0, 0), -+ REG_FIELD(ISC_DPC_CTRL, 1, 1), -+ REG_FIELD(ISC_DPC_CTRL, 2, 2), - REG_FIELD(ISC_WB_CTRL, 0, 0), - REG_FIELD(ISC_CFA_CTRL, 0, 0), - REG_FIELD(ISC_CC_CTRL, 0, 0), -@@ -2333,6 +2339,7 @@ int isc_pipeline_init(struct isc_device - REG_FIELD(ISC_GAM_CTRL, 1, 1), - REG_FIELD(ISC_GAM_CTRL, 2, 2), - REG_FIELD(ISC_GAM_CTRL, 3, 3), -+ REG_FIELD(ISC_VHXS_CTRL, 0, 0), - REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0), - REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0), - REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0), -@@ -2351,7 +2358,7 @@ int isc_pipeline_init(struct isc_device - } - - /* regmap configuration */ --#define ATMEL_ISC_REG_MAX 0xbfc -+#define ATMEL_ISC_REG_MAX 0xd5c - const struct regmap_config isc_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -67,17 +67,21 @@ struct isc_format { - }; - - /* Pipeline bitmap */ --#define WB_ENABLE BIT(0) --#define CFA_ENABLE BIT(1) --#define CC_ENABLE BIT(2) --#define GAM_ENABLE BIT(3) --#define GAM_BENABLE BIT(4) --#define GAM_GENABLE BIT(5) --#define GAM_RENABLE BIT(6) --#define CSC_ENABLE BIT(7) --#define CBC_ENABLE BIT(8) --#define SUB422_ENABLE BIT(9) --#define SUB420_ENABLE BIT(10) -+#define DPC_DPCENABLE BIT(0) -+#define DPC_GDCENABLE BIT(1) -+#define DPC_BLCENABLE BIT(2) -+#define WB_ENABLE BIT(3) -+#define CFA_ENABLE BIT(4) -+#define CC_ENABLE BIT(5) -+#define GAM_ENABLE BIT(6) -+#define GAM_BENABLE BIT(7) -+#define GAM_GENABLE BIT(8) -+#define GAM_RENABLE BIT(9) -+#define VHXS_ENABLE BIT(10) -+#define CSC_ENABLE BIT(11) -+#define CBC_ENABLE BIT(12) -+#define SUB422_ENABLE BIT(13) -+#define SUB420_ENABLE BIT(14) - - #define GAM_ENABLES (GAM_RENABLE | GAM_GENABLE | GAM_BENABLE | GAM_ENABLE) - -@@ -141,7 +145,7 @@ struct isc_ctrls { - u32 hist_minmax[HIST_BAYER][2]; - }; - --#define ISC_PIPE_LINE_NODE_NUM 11 -+#define ISC_PIPE_LINE_NODE_NUM 15 - - /* - * struct isc_reg_offsets - ISC device register offsets diff --git a/target/linux/at91/patches-5.15/175-media-atmel-atmel-isc-add-CC-initialization-function.patch b/target/linux/at91/patches-5.15/175-media-atmel-atmel-isc-add-CC-initialization-function.patch deleted file mode 100644 index 69491d7d13..0000000000 --- a/target/linux/at91/patches-5.15/175-media-atmel-atmel-isc-add-CC-initialization-function.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 0db91d2a803221c313c9f2cd1d71050d7c5a7b5b Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:17 +0200 -Subject: [PATCH 175/247] media: atmel: atmel-isc: add CC initialization - function - -The CC submodule is a part of the atmel-isc pipeline, and stands for -Color Correction. It is used to apply gains and offsets to the -chroma (U, V) components of the YUV elements. -Implement the CC submodule initialization, as a product -specific function, which currently configures the neutral point in color -correction. - -[hverkuil: made isc_sama5d2_config_cc static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 1 + - drivers/media/platform/atmel/atmel-isc.h | 3 +++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 14 ++++++++++++++ - 3 files changed, 18 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -661,6 +661,7 @@ static void isc_set_pipeline(struct isc_ - - isc->config_csc(isc); - isc->config_cbc(isc); -+ isc->config_cc(isc); - } - - static int isc_update_profile(struct isc_device *isc) ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -224,6 +224,8 @@ struct isc_reg_offsets { - * specific CSC module - * @config_cbc: pointer to a function that initializes product - * specific CBC module -+ * @config_cc: pointer to a function that initializes product -+ * specific CC module - * - * @offsets: struct holding the product specific register offsets - */ -@@ -297,6 +299,7 @@ struct isc_device { - struct { - void (*config_csc)(struct isc_device *isc); - void (*config_cbc)(struct isc_device *isc); -+ void (*config_cc)(struct isc_device *isc); - }; - - struct isc_reg_offsets offsets; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -83,6 +83,19 @@ static void isc_sama5d2_config_cbc(struc - isc->ctrls.contrast); - } - -+static void isc_sama5d2_config_cc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ /* Configure each register at the neutral fixed point 1.0 or 0.0 */ -+ regmap_write(regmap, ISC_CC_RR_RG, (1 << 8)); -+ regmap_write(regmap, ISC_CC_RB_OR, 0); -+ regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16); -+ regmap_write(regmap, ISC_CC_GB_OG, 0); -+ regmap_write(regmap, ISC_CC_BR_BG, 0); -+ regmap_write(regmap, ISC_CC_BB_OB, (1 << 8)); -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -251,6 +264,7 @@ static int atmel_isc_probe(struct platfo - - isc->config_csc = isc_sama5d2_config_csc; - isc->config_cbc = isc_sama5d2_config_cbc; -+ isc->config_cc = isc_sama5d2_config_cc; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; - isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; diff --git a/target/linux/at91/patches-5.15/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch b/target/linux/at91/patches-5.15/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch deleted file mode 100644 index 35c839692c..0000000000 --- a/target/linux/at91/patches-5.15/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 0a75c502eac4f2ef71b6c3e0b3a01db1b3c37ba9 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:18 +0200 -Subject: [PATCH 176/247] media: atmel: atmel-isc: create product specific v4l2 - controls config - -Create product specific callback for initializing v4l2 controls. -Call this from v4l2 controls init function. - -[hverkuil: made isc_sama5d2_config_ctrls static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 5 +++-- - drivers/media/platform/atmel/atmel-isc.h | 5 +++++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 12 ++++++++++++ - 3 files changed, 20 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -2051,11 +2051,12 @@ static int isc_ctrl_init(struct isc_devi - if (ret < 0) - return ret; - -+ /* Initialize product specific controls. For example, contrast */ -+ isc->config_ctrls(isc, ops); -+ - ctrls->brightness = 0; -- ctrls->contrast = 256; - - v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0); -- v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256); - v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1, - isc->gamma_max); - isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops, ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -226,6 +226,8 @@ struct isc_reg_offsets { - * specific CBC module - * @config_cc: pointer to a function that initializes product - * specific CC module -+ * @config_ctrls: pointer to a functoin that initializes product -+ * specific v4l2 controls. - * - * @offsets: struct holding the product specific register offsets - */ -@@ -300,6 +302,9 @@ struct isc_device { - void (*config_csc)(struct isc_device *isc); - void (*config_cbc)(struct isc_device *isc); - void (*config_cc)(struct isc_device *isc); -+ -+ void (*config_ctrls)(struct isc_device *isc, -+ const struct v4l2_ctrl_ops *ops); - }; - - struct isc_reg_offsets offsets; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -96,6 +96,17 @@ static void isc_sama5d2_config_cc(struct - regmap_write(regmap, ISC_CC_BB_OB, (1 << 8)); - } - -+static void isc_sama5d2_config_ctrls(struct isc_device *isc, -+ const struct v4l2_ctrl_ops *ops) -+{ -+ struct isc_ctrls *ctrls = &isc->ctrls; -+ struct v4l2_ctrl_handler *hdl = &ctrls->handler; -+ -+ ctrls->contrast = 256; -+ -+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256); -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -265,6 +276,7 @@ static int atmel_isc_probe(struct platfo - isc->config_csc = isc_sama5d2_config_csc; - isc->config_cbc = isc_sama5d2_config_cbc; - isc->config_cc = isc_sama5d2_config_cc; -+ isc->config_ctrls = isc_sama5d2_config_ctrls; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; - isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; diff --git a/target/linux/at91/patches-5.15/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch b/target/linux/at91/patches-5.15/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch deleted file mode 100644 index ef396f84cf..0000000000 --- a/target/linux/at91/patches-5.15/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch +++ /dev/null @@ -1,75 +0,0 @@ -From d53eb90044c19ba22b51978fcb007d9b5200b83a Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:19 +0200 -Subject: [PATCH 177/247] media: atmel: atmel-isc: create callback for DPC - submodule product specific - -The DPC submodule is a part of the atmel-isc pipeline, and stands for -Defective Pixel Correction. Its purpose is to detect defective pixels and -correct them if possible with the help of adjacent pixels. -Create a product specific callback for initializing the DPC submodule -of the pipeline. -For sama5d2 product, this module does not exist, thus this function is a noop. - -[hverkuil: made isc_sama5d2_config_dpc static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 1 + - drivers/media/platform/atmel/atmel-isc.h | 3 +++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++ - 3 files changed, 10 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -659,6 +659,7 @@ static void isc_set_pipeline(struct isc_ - regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES); - regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); - -+ isc->config_dpc(isc); - isc->config_csc(isc); - isc->config_cbc(isc); - isc->config_cc(isc); ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -220,6 +220,8 @@ struct isc_reg_offsets { - * @max_width: maximum frame width, dependent on the internal RAM - * @max_height: maximum frame height, dependent on the internal RAM - * -+ * @config_dpc: pointer to a function that initializes product -+ * specific DPC module - * @config_csc: pointer to a function that initializes product - * specific CSC module - * @config_cbc: pointer to a function that initializes product -@@ -299,6 +301,7 @@ struct isc_device { - u32 max_height; - - struct { -+ void (*config_dpc)(struct isc_device *isc); - void (*config_csc)(struct isc_device *isc); - void (*config_cbc)(struct isc_device *isc); - void (*config_cc)(struct isc_device *isc); ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -107,6 +107,11 @@ static void isc_sama5d2_config_ctrls(str - v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256); - } - -+static void isc_sama5d2_config_dpc(struct isc_device *isc) -+{ -+ /* This module is not present on sama5d2 pipeline */ -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -273,6 +278,7 @@ static int atmel_isc_probe(struct platfo - isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH; - isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT; - -+ isc->config_dpc = isc_sama5d2_config_dpc; - isc->config_csc = isc_sama5d2_config_csc; - isc->config_cbc = isc_sama5d2_config_cbc; - isc->config_cc = isc_sama5d2_config_cc; diff --git a/target/linux/at91/patches-5.15/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch b/target/linux/at91/patches-5.15/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch deleted file mode 100644 index a219704b31..0000000000 --- a/target/linux/at91/patches-5.15/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 96936a6753a13dea5a8f66de949e6594dd82ce22 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:20 +0200 -Subject: [PATCH 178/247] media: atmel: atmel-isc: create callback for GAM - submodule product specific - -The GAM submodule is a part of the atmel-isc pipeline, and stands for -Gamma Correction. It is used to apply the gamma curve to the incoming pixels. -Create a product specific callback for initializing the GAM submodule -of the pipeline. -For sama5d2 product, there is no special configuration at this moment, -thus this function is a noop. - -[hverkuil: made isc_sama5d2_config_gam static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 1 + - drivers/media/platform/atmel/atmel-isc.h | 3 +++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++ - 3 files changed, 10 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -663,6 +663,7 @@ static void isc_set_pipeline(struct isc_ - isc->config_csc(isc); - isc->config_cbc(isc); - isc->config_cc(isc); -+ isc->config_gam(isc); - } - - static int isc_update_profile(struct isc_device *isc) ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -228,6 +228,8 @@ struct isc_reg_offsets { - * specific CBC module - * @config_cc: pointer to a function that initializes product - * specific CC module -+ * @config_gam: pointer to a function that initializes product -+ * specific GAMMA module - * @config_ctrls: pointer to a functoin that initializes product - * specific v4l2 controls. - * -@@ -305,6 +307,7 @@ struct isc_device { - void (*config_csc)(struct isc_device *isc); - void (*config_cbc)(struct isc_device *isc); - void (*config_cc)(struct isc_device *isc); -+ void (*config_gam)(struct isc_device *isc); - - void (*config_ctrls)(struct isc_device *isc, - const struct v4l2_ctrl_ops *ops); ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -112,6 +112,11 @@ static void isc_sama5d2_config_dpc(struc - /* This module is not present on sama5d2 pipeline */ - } - -+static void isc_sama5d2_config_gam(struct isc_device *isc) -+{ -+ /* No specific gamma configuration */ -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -282,6 +287,7 @@ static int atmel_isc_probe(struct platfo - isc->config_csc = isc_sama5d2_config_csc; - isc->config_cbc = isc_sama5d2_config_cbc; - isc->config_cc = isc_sama5d2_config_cc; -+ isc->config_gam = isc_sama5d2_config_gam; - isc->config_ctrls = isc_sama5d2_config_ctrls; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; diff --git a/target/linux/at91/patches-5.15/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch b/target/linux/at91/patches-5.15/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch deleted file mode 100644 index 8442925a7e..0000000000 --- a/target/linux/at91/patches-5.15/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch +++ /dev/null @@ -1,95 +0,0 @@ -From ece1d7059731e31875e6eb464da4fb4a16465305 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:21 +0200 -Subject: [PATCH 179/247] media: atmel: atmel-isc: create callback for RLP - submodule product specific - -The RLP submodule is a part of the atmel-isc pipeline, and stands for -Rounding,Limiting and Packaging. It used to extract specific data from the -ISC pipeline. For example if we want to output greyscale 8 bit, we would -use limiting to 8 bits, and packaging to Luma component only. - -Create a product specific callback for initializing the RLP submodule -of the pipeline - -[hverkuil: made isc_sama5d2_config_rlp static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 6 ++---- - drivers/media/platform/atmel/atmel-isc.h | 3 +++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 10 ++++++++++ - 3 files changed, 15 insertions(+), 4 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -719,11 +719,10 @@ static void isc_set_histogram(struct isc - static int isc_configure(struct isc_device *isc) - { - struct regmap *regmap = isc->regmap; -- u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline; -+ u32 pfe_cfg0, dcfg, mask, pipeline; - struct isc_subdev_entity *subdev = isc->current_subdev; - - pfe_cfg0 = isc->config.sd_format->pfe_cfg0_bps; -- rlp_mode = isc->config.rlp_cfg_mode; - pipeline = isc->config.bits_pipeline; - - dcfg = isc->config.dcfg_imode | isc->dcfg; -@@ -736,8 +735,7 @@ static int isc_configure(struct isc_devi - - regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0); - -- regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, -- ISC_RLP_CFG_MODE_MASK, rlp_mode); -+ isc->config_rlp(isc); - - regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg); - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -230,6 +230,8 @@ struct isc_reg_offsets { - * specific CC module - * @config_gam: pointer to a function that initializes product - * specific GAMMA module -+ * @config_rlp: pointer to a function that initializes product -+ * specific RLP module - * @config_ctrls: pointer to a functoin that initializes product - * specific v4l2 controls. - * -@@ -308,6 +310,7 @@ struct isc_device { - void (*config_cbc)(struct isc_device *isc); - void (*config_cc)(struct isc_device *isc); - void (*config_gam)(struct isc_device *isc); -+ void (*config_rlp)(struct isc_device *isc); - - void (*config_ctrls)(struct isc_device *isc, - const struct v4l2_ctrl_ops *ops); ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -117,6 +117,15 @@ static void isc_sama5d2_config_gam(struc - /* No specific gamma configuration */ - } - -+static void isc_sama5d2_config_rlp(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ u32 rlp_mode = isc->config.rlp_cfg_mode; -+ -+ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, -+ ISC_RLP_CFG_MODE_MASK, rlp_mode); -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -288,6 +297,7 @@ static int atmel_isc_probe(struct platfo - isc->config_cbc = isc_sama5d2_config_cbc; - isc->config_cc = isc_sama5d2_config_cc; - isc->config_gam = isc_sama5d2_config_gam; -+ isc->config_rlp = isc_sama5d2_config_rlp; - isc->config_ctrls = isc_sama5d2_config_ctrls; - - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; diff --git a/target/linux/at91/patches-5.15/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch b/target/linux/at91/patches-5.15/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch deleted file mode 100644 index 1c64cfca2e..0000000000 --- a/target/linux/at91/patches-5.15/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch +++ /dev/null @@ -1,440 +0,0 @@ -From dda51aa2e4524914d25022864466fa9d8713a5e9 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:22 +0200 -Subject: [PATCH 180/247] media: atmel: atmel-isc: move the formats list into - product specific code - -The list of input and output formats has to be product specific. -Move this list into the product specific code. -Have pointers to these arrays inside the device struct. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 167 ++---------------- - drivers/media/platform/atmel/atmel-isc.h | 12 +- - .../media/platform/atmel/atmel-sama5d2-isc.c | 136 ++++++++++++++ - 3 files changed, 165 insertions(+), 150 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -45,137 +45,6 @@ module_param(sensor_preferred, uint, 064 - MODULE_PARM_DESC(sensor_preferred, - "Sensor is preferred to output the specified format (1-on 0-off), default 1"); - --/* This is a list of the formats that the ISC can *output* */ --const struct isc_format controller_formats[] = { -- { -- .fourcc = V4L2_PIX_FMT_ARGB444, -- }, -- { -- .fourcc = V4L2_PIX_FMT_ARGB555, -- }, -- { -- .fourcc = V4L2_PIX_FMT_RGB565, -- }, -- { -- .fourcc = V4L2_PIX_FMT_ABGR32, -- }, -- { -- .fourcc = V4L2_PIX_FMT_XBGR32, -- }, -- { -- .fourcc = V4L2_PIX_FMT_YUV420, -- }, -- { -- .fourcc = V4L2_PIX_FMT_YUYV, -- }, -- { -- .fourcc = V4L2_PIX_FMT_YUV422P, -- }, -- { -- .fourcc = V4L2_PIX_FMT_GREY, -- }, -- { -- .fourcc = V4L2_PIX_FMT_Y10, -- }, --}; -- --/* This is a list of formats that the ISC can receive as *input* */ --struct isc_format formats_list[] = { -- { -- .fourcc = V4L2_PIX_FMT_SBGGR8, -- .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- .cfa_baycfg = ISC_BAY_CFG_BGBG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGBRG8, -- .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- .cfa_baycfg = ISC_BAY_CFG_GBGB, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGRBG8, -- .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- .cfa_baycfg = ISC_BAY_CFG_GRGR, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SRGGB8, -- .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- .cfa_baycfg = ISC_BAY_CFG_RGRG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SBGGR10, -- .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -- .cfa_baycfg = ISC_BAY_CFG_RGRG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGBRG10, -- .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -- .cfa_baycfg = ISC_BAY_CFG_GBGB, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGRBG10, -- .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -- .cfa_baycfg = ISC_BAY_CFG_GRGR, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SRGGB10, -- .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -- .cfa_baycfg = ISC_BAY_CFG_RGRG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SBGGR12, -- .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -- .cfa_baycfg = ISC_BAY_CFG_BGBG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGBRG12, -- .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -- .cfa_baycfg = ISC_BAY_CFG_GBGB, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SGRBG12, -- .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -- .cfa_baycfg = ISC_BAY_CFG_GRGR, -- }, -- { -- .fourcc = V4L2_PIX_FMT_SRGGB12, -- .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -- .cfa_baycfg = ISC_BAY_CFG_RGRG, -- }, -- { -- .fourcc = V4L2_PIX_FMT_GREY, -- .mbus_code = MEDIA_BUS_FMT_Y8_1X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- }, -- { -- .fourcc = V4L2_PIX_FMT_YUYV, -- .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- }, -- { -- .fourcc = V4L2_PIX_FMT_RGB565, -- .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, -- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -- }, -- { -- .fourcc = V4L2_PIX_FMT_Y10, -- .mbus_code = MEDIA_BUS_FMT_Y10_1X10, -- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -- }, -- --}; -- - #define ISC_IS_FORMAT_RAW(mbus_code) \ - (((mbus_code) & 0xf000) == 0x3000) - -@@ -919,24 +788,25 @@ static int isc_querycap(struct file *fil - static int isc_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) - { -+ struct isc_device *isc = video_drvdata(file); - u32 index = f->index; - u32 i, supported_index; - -- if (index < ARRAY_SIZE(controller_formats)) { -- f->pixelformat = controller_formats[index].fourcc; -+ if (index < isc->controller_formats_size) { -+ f->pixelformat = isc->controller_formats[index].fourcc; - return 0; - } - -- index -= ARRAY_SIZE(controller_formats); -+ index -= isc->controller_formats_size; - - supported_index = 0; - -- for (i = 0; i < ARRAY_SIZE(formats_list); i++) { -- if (!ISC_IS_FORMAT_RAW(formats_list[i].mbus_code) || -- !formats_list[i].sd_support) -+ for (i = 0; i < isc->formats_list_size; i++) { -+ if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) || -+ !isc->formats_list[i].sd_support) - continue; - if (supported_index == index) { -- f->pixelformat = formats_list[i].fourcc; -+ f->pixelformat = isc->formats_list[i].fourcc; - return 0; - } - supported_index++; -@@ -1477,8 +1347,8 @@ static int isc_enum_framesizes(struct fi - if (isc->user_formats[i]->fourcc == fsize->pixel_format) - ret = 0; - -- for (i = 0; i < ARRAY_SIZE(controller_formats); i++) -- if (controller_formats[i].fourcc == fsize->pixel_format) -+ for (i = 0; i < isc->controller_formats_size; i++) -+ if (isc->controller_formats[i].fourcc == fsize->pixel_format) - ret = 0; - - if (ret) -@@ -1514,8 +1384,8 @@ static int isc_enum_frameintervals(struc - if (isc->user_formats[i]->fourcc == fival->pixel_format) - ret = 0; - -- for (i = 0; i < ARRAY_SIZE(controller_formats); i++) -- if (controller_formats[i].fourcc == fival->pixel_format) -+ for (i = 0; i < isc->controller_formats_size; i++) -+ if (isc->controller_formats[i].fourcc == fival->pixel_format) - ret = 0; - - if (ret) -@@ -2126,12 +1996,13 @@ static void isc_async_unbind(struct v4l2 - v4l2_ctrl_handler_free(&isc->ctrls.handler); - } - --static struct isc_format *find_format_by_code(unsigned int code, int *index) -+static struct isc_format *find_format_by_code(struct isc_device *isc, -+ unsigned int code, int *index) - { -- struct isc_format *fmt = &formats_list[0]; -+ struct isc_format *fmt = &isc->formats_list[0]; - unsigned int i; - -- for (i = 0; i < ARRAY_SIZE(formats_list); i++) { -+ for (i = 0; i < isc->formats_list_size; i++) { - if (fmt->mbus_code == code) { - *index = i; - return fmt; -@@ -2148,7 +2019,7 @@ static int isc_formats_init(struct isc_d - struct isc_format *fmt; - struct v4l2_subdev *subdev = isc->current_subdev->sd; - unsigned int num_fmts, i, j; -- u32 list_size = ARRAY_SIZE(formats_list); -+ u32 list_size = isc->formats_list_size; - struct v4l2_subdev_mbus_code_enum mbus_code = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; -@@ -2158,7 +2029,7 @@ static int isc_formats_init(struct isc_d - NULL, &mbus_code)) { - mbus_code.index++; - -- fmt = find_format_by_code(mbus_code.code, &i); -+ fmt = find_format_by_code(isc, mbus_code.code, &i); - if (!fmt) { - v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n", - mbus_code.code); -@@ -2179,7 +2050,7 @@ static int isc_formats_init(struct isc_d - if (!isc->user_formats) - return -ENOMEM; - -- fmt = &formats_list[0]; -+ fmt = &isc->formats_list[0]; - for (i = 0, j = 0; i < list_size; i++) { - if (fmt->sd_support) - isc->user_formats[j++] = fmt; ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -236,6 +236,12 @@ struct isc_reg_offsets { - * specific v4l2 controls. - * - * @offsets: struct holding the product specific register offsets -+ * @controller_formats: pointer to the array of possible formats that the -+ * controller can output -+ * @formats_list: pointer to the array of possible formats that can -+ * be used as an input to the controller -+ * @controller_formats_size: size of controller_formats array -+ * @formats_list_size: size of formats_list array - */ - struct isc_device { - struct regmap *regmap; -@@ -317,10 +323,12 @@ struct isc_device { - }; - - struct isc_reg_offsets offsets; -+ const struct isc_format *controller_formats; -+ struct isc_format *formats_list; -+ u32 controller_formats_size; -+ u32 formats_list_size; - }; - --extern struct isc_format formats_list[]; --extern const struct isc_format controller_formats[]; - extern const struct regmap_config isc_regmap_config; - extern const struct v4l2_async_notifier_operations isc_async_ops; - ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -54,6 +54,137 @@ - - #define ISC_CLK_MAX_DIV 255 - -+/* This is a list of the formats that the ISC can *output* */ -+static const struct isc_format sama5d2_controller_formats[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_ARGB444, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_ARGB555, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_RGB565, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_ABGR32, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_XBGR32, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUV422P, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_GREY, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_Y10, -+ }, -+}; -+ -+/* This is a list of formats that the ISC can receive as *input* */ -+static struct isc_format sama5d2_formats_list[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR8, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_BGBG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG8, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG8, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB8, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR10, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG10, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG10, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB10, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR12, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_BGBG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG12, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG12, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB12, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_GREY, -+ .mbus_code = MEDIA_BUS_FMT_Y8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_RGB565, -+ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_Y10, -+ .mbus_code = MEDIA_BUS_FMT_Y10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ }, -+ -+}; -+ - static void isc_sama5d2_config_csc(struct isc_device *isc) - { - struct regmap *regmap = isc->regmap; -@@ -310,6 +441,11 @@ static int atmel_isc_probe(struct platfo - isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET; - isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET; - -+ isc->controller_formats = sama5d2_controller_formats; -+ isc->controller_formats_size = ARRAY_SIZE(sama5d2_controller_formats); -+ isc->formats_list = sama5d2_formats_list; -+ isc->formats_list_size = ARRAY_SIZE(sama5d2_formats_list); -+ - /* sama5d2-isc - 8 bits per beat */ - isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8; - diff --git a/target/linux/at91/patches-5.15/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch b/target/linux/at91/patches-5.15/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch deleted file mode 100644 index 042fc609fe..0000000000 --- a/target/linux/at91/patches-5.15/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 8601f1fc0a9a22788bfa6369fbbf83b3828a5b42 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:23 +0200 -Subject: [PATCH 181/247] media: atmel: atmel-isc: create an adapt pipeline - callback for product specific - -Once the pipeline is set in the base code, create a callback that will adapt -the ISC pipeline to each product. -Create the adapt_pipeline callback that will be used in this fashion. - -[hverkuil: made isc_sama5d2_adapt_pipeline static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 4 ++++ - drivers/media/platform/atmel/atmel-isc.h | 5 +++++ - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 11 +++++++++++ - 3 files changed, 20 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -1059,6 +1059,10 @@ static int isc_try_configure_pipeline(st - default: - isc->try_config.bits_pipeline = 0x0; - } -+ -+ /* Tune the pipeline to product specific */ -+ isc->adapt_pipeline(isc); -+ - return 0; - } - ---- a/drivers/media/platform/atmel/atmel-isc.h -+++ b/drivers/media/platform/atmel/atmel-isc.h -@@ -235,6 +235,9 @@ struct isc_reg_offsets { - * @config_ctrls: pointer to a functoin that initializes product - * specific v4l2 controls. - * -+ * @adapt_pipeline: pointer to a function that adapts the pipeline bits -+ * to the product specific pipeline -+ * - * @offsets: struct holding the product specific register offsets - * @controller_formats: pointer to the array of possible formats that the - * controller can output -@@ -320,6 +323,8 @@ struct isc_device { - - void (*config_ctrls)(struct isc_device *isc, - const struct v4l2_ctrl_ops *ops); -+ -+ void (*adapt_pipeline)(struct isc_device *isc); - }; - - struct isc_reg_offsets offsets; ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -54,6 +54,10 @@ - - #define ISC_CLK_MAX_DIV 255 - -+#define ISC_SAMA5D2_PIPELINE \ -+ (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \ -+ CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE) -+ - /* This is a list of the formats that the ISC can *output* */ - static const struct isc_format sama5d2_controller_formats[] = { - { -@@ -257,6 +261,11 @@ static void isc_sama5d2_config_rlp(struc - ISC_RLP_CFG_MODE_MASK, rlp_mode); - } - -+static void isc_sama5d2_adapt_pipeline(struct isc_device *isc) -+{ -+ isc->try_config.bits_pipeline &= ISC_SAMA5D2_PIPELINE; -+} -+ - /* Gamma table with gamma 1/2.2 */ - static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = { - /* 0 --> gamma 1/1.8 */ -@@ -431,6 +440,8 @@ static int atmel_isc_probe(struct platfo - isc->config_rlp = isc_sama5d2_config_rlp; - isc->config_ctrls = isc_sama5d2_config_ctrls; - -+ isc->adapt_pipeline = isc_sama5d2_adapt_pipeline; -+ - isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET; - isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET; - isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET; diff --git a/target/linux/at91/patches-5.15/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch b/target/linux/at91/patches-5.15/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch deleted file mode 100644 index 00849c7d12..0000000000 --- a/target/linux/at91/patches-5.15/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch +++ /dev/null @@ -1,55 +0,0 @@ -From bf032d1a0105939b90072914d88181fbe6187f43 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:24 +0200 -Subject: [PATCH 182/247] media: atmel: atmel-isc-regs: add additional fields - for sama7g5 type pipeline - -Add additional fields for registers present in sama7g5 type pipeline. -Extend register masks for additional bits in sama7g5 type pipeline registers. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-regs.h | 16 ++++++++++++++-- - 1 file changed, 14 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -289,8 +289,18 @@ - #define ISC_RLP_CFG_MODE_ARGB32 0xa - #define ISC_RLP_CFG_MODE_YYCC 0xb - #define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc -+#define ISC_RLP_CFG_MODE_YCYC 0xd - #define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0) - -+#define ISC_RLP_CFG_LSH BIT(5) -+ -+#define ISC_RLP_CFG_YMODE_YUYV (3 << 6) -+#define ISC_RLP_CFG_YMODE_YVYU (2 << 6) -+#define ISC_RLP_CFG_YMODE_VYUY (0 << 6) -+#define ISC_RLP_CFG_YMODE_UYVY (1 << 6) -+ -+#define ISC_RLP_CFG_YMODE_MASK GENMASK(7, 6) -+ - /* Offset for HIS register specific to sama5d2 product */ - #define ISC_SAMA5D2_HIS_OFFSET 0 - /* Histogram Control Register */ -@@ -332,13 +342,15 @@ - #define ISC_DCFG_YMBSIZE_BEATS4 (0x1 << 4) - #define ISC_DCFG_YMBSIZE_BEATS8 (0x2 << 4) - #define ISC_DCFG_YMBSIZE_BEATS16 (0x3 << 4) --#define ISC_DCFG_YMBSIZE_MASK GENMASK(5, 4) -+#define ISC_DCFG_YMBSIZE_BEATS32 (0x4 << 4) -+#define ISC_DCFG_YMBSIZE_MASK GENMASK(6, 4) - - #define ISC_DCFG_CMBSIZE_SINGLE (0x0 << 8) - #define ISC_DCFG_CMBSIZE_BEATS4 (0x1 << 8) - #define ISC_DCFG_CMBSIZE_BEATS8 (0x2 << 8) - #define ISC_DCFG_CMBSIZE_BEATS16 (0x3 << 8) --#define ISC_DCFG_CMBSIZE_MASK GENMASK(9, 8) -+#define ISC_DCFG_CMBSIZE_BEATS32 (0x4 << 8) -+#define ISC_DCFG_CMBSIZE_MASK GENMASK(10, 8) - - /* DMA Control Register */ - #define ISC_DCTRL 0x000003e4 diff --git a/target/linux/at91/patches-5.15/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch b/target/linux/at91/patches-5.15/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch deleted file mode 100644 index 247c901558..0000000000 --- a/target/linux/at91/patches-5.15/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch +++ /dev/null @@ -1,145 +0,0 @@ -From fa9e6cd8f3ba4a277c06e4c1fb01cd69b3a57234 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:25 +0200 -Subject: [PATCH 183/247] media: atmel: atmel-isc-base: add support for more - formats and additional pipeline modules - -Add support for additional formats supported by newer pipelines, and for -additional pipeline modules. - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-isc-base.c | 48 +++++++++++++++---- - 1 file changed, 38 insertions(+), 10 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -855,6 +855,8 @@ static int isc_try_validate_formats(stru - case V4L2_PIX_FMT_YUV420: - case V4L2_PIX_FMT_YUV422P: - case V4L2_PIX_FMT_YUYV: -+ case V4L2_PIX_FMT_UYVY: -+ case V4L2_PIX_FMT_VYUY: - ret = 0; - yuv = true; - break; -@@ -869,6 +871,7 @@ static int isc_try_validate_formats(stru - break; - case V4L2_PIX_FMT_GREY: - case V4L2_PIX_FMT_Y10: -+ case V4L2_PIX_FMT_Y16: - ret = 0; - grey = true; - break; -@@ -899,6 +902,8 @@ static int isc_try_validate_formats(stru - */ - static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) - { -+ isc->try_config.rlp_cfg_mode = 0; -+ - switch (isc->try_config.fourcc) { - case V4L2_PIX_FMT_SBGGR8: - case V4L2_PIX_FMT_SGBRG8: -@@ -965,7 +970,19 @@ static int isc_try_configure_rlp_dma(str - isc->try_config.bpp = 16; - break; - case V4L2_PIX_FMT_YUYV: -- isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; -+ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV; -+ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; -+ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; -+ isc->try_config.bpp = 16; -+ break; -+ case V4L2_PIX_FMT_UYVY: -+ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY; -+ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; -+ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; -+ isc->try_config.bpp = 16; -+ break; -+ case V4L2_PIX_FMT_VYUY: -+ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY; - isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; - isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; - isc->try_config.bpp = 16; -@@ -976,8 +993,11 @@ static int isc_try_configure_rlp_dma(str - isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; - isc->try_config.bpp = 8; - break; -+ case V4L2_PIX_FMT_Y16: -+ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH; -+ fallthrough; - case V4L2_PIX_FMT_Y10: -- isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10; -+ isc->try_config.rlp_cfg_mode |= ISC_RLP_CFG_MODE_DATY10; - isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; - isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; - isc->try_config.bpp = 16; -@@ -1011,7 +1031,8 @@ static int isc_try_configure_pipeline(st - /* if sensor format is RAW, we convert inside ISC */ - if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { - isc->try_config.bits_pipeline = CFA_ENABLE | -- WB_ENABLE | GAM_ENABLES; -+ WB_ENABLE | GAM_ENABLES | DPC_BLCENABLE | -+ CC_ENABLE; - } else { - isc->try_config.bits_pipeline = 0x0; - } -@@ -1020,8 +1041,9 @@ static int isc_try_configure_pipeline(st - /* if sensor format is RAW, we convert inside ISC */ - if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { - isc->try_config.bits_pipeline = CFA_ENABLE | -- CSC_ENABLE | WB_ENABLE | GAM_ENABLES | -- SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE; -+ CSC_ENABLE | GAM_ENABLES | WB_ENABLE | -+ SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE | -+ DPC_BLCENABLE; - } else { - isc->try_config.bits_pipeline = 0x0; - } -@@ -1031,33 +1053,39 @@ static int isc_try_configure_pipeline(st - if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { - isc->try_config.bits_pipeline = CFA_ENABLE | - CSC_ENABLE | WB_ENABLE | GAM_ENABLES | -- SUB422_ENABLE | CBC_ENABLE; -+ SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE; - } else { - isc->try_config.bits_pipeline = 0x0; - } - break; - case V4L2_PIX_FMT_YUYV: -+ case V4L2_PIX_FMT_UYVY: -+ case V4L2_PIX_FMT_VYUY: - /* if sensor format is RAW, we convert inside ISC */ - if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { - isc->try_config.bits_pipeline = CFA_ENABLE | - CSC_ENABLE | WB_ENABLE | GAM_ENABLES | -- SUB422_ENABLE | CBC_ENABLE; -+ SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE; - } else { - isc->try_config.bits_pipeline = 0x0; - } - break; - case V4L2_PIX_FMT_GREY: -- if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { -+ case V4L2_PIX_FMT_Y16: - /* if sensor format is RAW, we convert inside ISC */ -+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { - isc->try_config.bits_pipeline = CFA_ENABLE | - CSC_ENABLE | WB_ENABLE | GAM_ENABLES | -- CBC_ENABLE; -+ CBC_ENABLE | DPC_BLCENABLE; - } else { - isc->try_config.bits_pipeline = 0x0; - } - break; - default: -- isc->try_config.bits_pipeline = 0x0; -+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) -+ isc->try_config.bits_pipeline = WB_ENABLE | DPC_BLCENABLE; -+ else -+ isc->try_config.bits_pipeline = 0x0; - } - - /* Tune the pipeline to product specific */ diff --git a/target/linux/at91/patches-5.15/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch b/target/linux/at91/patches-5.15/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch deleted file mode 100644 index 587f4862f2..0000000000 --- a/target/linux/at91/patches-5.15/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch +++ /dev/null @@ -1,26 +0,0 @@ -From b36d11efc134f9f1e2804270d08b9dbefdee4a0d Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:26 +0200 -Subject: [PATCH 184/247] media: atmel: atmel-isc-sama5d2: remove duplicate - define - -Remove a duplicate definition of clock max divider - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -52,8 +52,6 @@ - #define ISC_SAMA5D2_MAX_SUPPORT_WIDTH 2592 - #define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT 1944 - --#define ISC_CLK_MAX_DIV 255 -- - #define ISC_SAMA5D2_PIPELINE \ - (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \ - CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE) diff --git a/target/linux/at91/patches-5.15/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch b/target/linux/at91/patches-5.15/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch deleted file mode 100644 index a21ac2a7c0..0000000000 --- a/target/linux/at91/patches-5.15/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch +++ /dev/null @@ -1,810 +0,0 @@ -From 74fd7ea680cb1a3a43b51a7279aea45efdf9ec42 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Tue, 13 Apr 2021 12:57:29 +0200 -Subject: [PATCH 185/247] media: atmel: atmel-isc: add microchip-xisc driver - -Add driver for the extended variant of the isc, the microchip XISC -present on sama7g5 product. - -[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer exists] -[hverkuil: made isc_sama7g5_config_csc et al static] -[hverkuil: made sama7g5_controller_formats et al static] - -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/Makefile | 1 + - drivers/media/platform/atmel/Kconfig | 11 + - drivers/media/platform/atmel/Makefile | 2 + - drivers/media/platform/atmel/atmel-isc-base.c | 2 +- - drivers/media/platform/atmel/atmel-isc-regs.h | 26 + - .../media/platform/atmel/atmel-sama7g5-isc.c | 630 ++++++++++++++++++ - 6 files changed, 671 insertions(+), 1 deletion(-) - create mode 100644 drivers/media/platform/atmel/atmel-sama7g5-isc.c - ---- a/drivers/media/platform/Makefile -+++ b/drivers/media/platform/Makefile -@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vi - - obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/ - obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/ -+obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/ - - obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/ - ---- a/drivers/media/platform/atmel/Kconfig -+++ b/drivers/media/platform/atmel/Kconfig -@@ -12,6 +12,17 @@ config VIDEO_ATMEL_ISC - This module makes the ATMEL Image Sensor Controller available - as a v4l2 device. - -+config VIDEO_ATMEL_XISC -+ tristate "ATMEL eXtended Image Sensor Controller (XISC) support" -+ depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API -+ depends on ARCH_AT91 || COMPILE_TEST -+ select VIDEOBUF2_DMA_CONTIG -+ select REGMAP_MMIO -+ select V4L2_FWNODE -+ help -+ This module makes the ATMEL eXtended Image Sensor Controller -+ available as a v4l2 device. -+ - config VIDEO_ATMEL_ISI - tristate "ATMEL Image Sensor Interface (ISI) support" - depends on VIDEO_V4L2 && OF ---- a/drivers/media/platform/atmel/Makefile -+++ b/drivers/media/platform/atmel/Makefile -@@ -1,5 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0-only - atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o -+atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o - - obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o - obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o -+obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -600,7 +600,7 @@ static int isc_configure(struct isc_devi - mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW | - ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW | - ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC | -- ISC_PFE_CFG0_CCIR656; -+ ISC_PFE_CFG0_CCIR656 | ISC_PFE_CFG0_MIPI; - - regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0); - ---- a/drivers/media/platform/atmel/atmel-isc-regs.h -+++ b/drivers/media/platform/atmel/atmel-isc-regs.h -@@ -26,6 +26,7 @@ - #define ISC_PFE_CFG0_PPOL_LOW BIT(2) - #define ISC_PFE_CFG0_CCIR656 BIT(9) - #define ISC_PFE_CFG0_CCIR_CRC BIT(10) -+#define ISC_PFE_CFG0_MIPI BIT(14) - - #define ISC_PFE_CFG0_MODE_PROGRESSIVE (0x0 << 4) - #define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4) -@@ -184,6 +185,8 @@ - /* ISC Gamma Correction Control Register */ - #define ISC_GAM_CTRL 0x00000094 - -+#define ISC_GAM_CTRL_BIPART BIT(4) -+ - /* ISC_Gamma Correction Blue Entry Register */ - #define ISC_GAM_BENTRY 0x00000098 - -@@ -222,6 +225,8 @@ - - /* Offset for CSC register specific to sama5d2 product */ - #define ISC_SAMA5D2_CSC_OFFSET 0 -+/* Offset for CSC register specific to sama7g5 product */ -+#define ISC_SAMA7G5_CSC_OFFSET 0x11c - - /* Color Space Conversion Control Register */ - #define ISC_CSC_CTRL 0x00000398 -@@ -246,6 +251,8 @@ - - /* Offset for CBC register specific to sama5d2 product */ - #define ISC_SAMA5D2_CBC_OFFSET 0 -+/* Offset for CBC register specific to sama7g5 product */ -+#define ISC_SAMA7G5_CBC_OFFSET 0x11c - - /* Contrast And Brightness Control Register */ - #define ISC_CBC_CTRL 0x000003b4 -@@ -261,18 +268,30 @@ - #define ISC_CBC_CONTRAST 0x000003c0 - #define ISC_CBC_CONTRAST_MASK GENMASK(11, 0) - -+/* Hue Register */ -+#define ISC_CBCHS_HUE 0x4e0 -+/* Saturation Register */ -+#define ISC_CBCHS_SAT 0x4e4 -+ - /* Offset for SUB422 register specific to sama5d2 product */ - #define ISC_SAMA5D2_SUB422_OFFSET 0 -+/* Offset for SUB422 register specific to sama7g5 product */ -+#define ISC_SAMA7G5_SUB422_OFFSET 0x124 -+ - /* Subsampling 4:4:4 to 4:2:2 Control Register */ - #define ISC_SUB422_CTRL 0x000003c4 - - /* Offset for SUB420 register specific to sama5d2 product */ - #define ISC_SAMA5D2_SUB420_OFFSET 0 -+/* Offset for SUB420 register specific to sama7g5 product */ -+#define ISC_SAMA7G5_SUB420_OFFSET 0x124 - /* Subsampling 4:2:2 to 4:2:0 Control Register */ - #define ISC_SUB420_CTRL 0x000003cc - - /* Offset for RLP register specific to sama5d2 product */ - #define ISC_SAMA5D2_RLP_OFFSET 0 -+/* Offset for RLP register specific to sama7g5 product */ -+#define ISC_SAMA7G5_RLP_OFFSET 0x124 - /* Rounding, Limiting and Packing Configuration Register */ - #define ISC_RLP_CFG 0x000003d0 - -@@ -303,6 +322,8 @@ - - /* Offset for HIS register specific to sama5d2 product */ - #define ISC_SAMA5D2_HIS_OFFSET 0 -+/* Offset for HIS register specific to sama7g5 product */ -+#define ISC_SAMA7G5_HIS_OFFSET 0x124 - /* Histogram Control Register */ - #define ISC_HIS_CTRL 0x000003d4 - -@@ -326,6 +347,8 @@ - - /* Offset for DMA register specific to sama5d2 product */ - #define ISC_SAMA5D2_DMA_OFFSET 0 -+/* Offset for DMA register specific to sama7g5 product */ -+#define ISC_SAMA7G5_DMA_OFFSET 0x13c - - /* DMA Configuration Register */ - #define ISC_DCFG 0x000003e0 -@@ -376,11 +399,14 @@ - - /* Offset for version register specific to sama5d2 product */ - #define ISC_SAMA5D2_VERSION_OFFSET 0 -+#define ISC_SAMA7G5_VERSION_OFFSET 0x13c - /* Version Register */ - #define ISC_VERSION 0x0000040c - - /* Offset for version register specific to sama5d2 product */ - #define ISC_SAMA5D2_HIS_ENTRY_OFFSET 0 -+/* Offset for version register specific to sama7g5 product */ -+#define ISC_SAMA7G5_HIS_ENTRY_OFFSET 0x14c - /* Histogram Entry */ - #define ISC_HIS_ENTRY 0x00000410 - ---- /dev/null -+++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c -@@ -0,0 +1,630 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Microchip eXtended Image Sensor Controller (XISC) driver -+ * -+ * Copyright (C) 2019-2021 Microchip Technology, Inc. and its subsidiaries -+ * -+ * Author: Eugen Hristev -+ * -+ * Sensor-->PFE-->DPC-->WB-->CFA-->CC-->GAM-->VHXS-->CSC-->CBHS-->SUB-->RLP-->DMA-->HIS -+ * -+ * ISC video pipeline integrates the following submodules: -+ * PFE: Parallel Front End to sample the camera sensor input stream -+ * DPC: Defective Pixel Correction with black offset correction, green disparity -+ * correction and defective pixel correction (3 modules total) -+ * WB: Programmable white balance in the Bayer domain -+ * CFA: Color filter array interpolation module -+ * CC: Programmable color correction -+ * GAM: Gamma correction -+ *VHXS: Vertical and Horizontal Scaler -+ * CSC: Programmable color space conversion -+ *CBHS: Contrast Brightness Hue and Saturation control -+ * SUB: This module performs YCbCr444 to YCbCr420 chrominance subsampling -+ * RLP: This module performs rounding, range limiting -+ * and packing of the incoming data -+ * DMA: This module performs DMA master accesses to write frames to external RAM -+ * HIS: Histogram module performs statistic counters on the frames -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "atmel-isc-regs.h" -+#include "atmel-isc.h" -+ -+#define ISC_SAMA7G5_MAX_SUPPORT_WIDTH 3264 -+#define ISC_SAMA7G5_MAX_SUPPORT_HEIGHT 2464 -+ -+#define ISC_SAMA7G5_PIPELINE \ -+ (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \ -+ CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE) -+ -+/* This is a list of the formats that the ISC can *output* */ -+static const struct isc_format sama7g5_controller_formats[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_ARGB444, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_ARGB555, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_RGB565, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_ABGR32, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_XBGR32, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_VYUY, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUV422P, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_GREY, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_Y10, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_Y16, -+ }, -+}; -+ -+/* This is a list of formats that the ISC can receive as *input* */ -+static struct isc_format sama7g5_formats_list[] = { -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR8, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_BGBG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG8, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG8, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB8, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR10, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG10, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG10, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB10, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SBGGR12, -+ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_BGBG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGBRG12, -+ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_GBGB, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SGRBG12, -+ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_GRGR, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_SRGGB12, -+ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE, -+ .cfa_baycfg = ISC_BAY_CFG_RGRG, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_GREY, -+ .mbus_code = MEDIA_BUS_FMT_Y8_1X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_RGB565, -+ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, -+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT, -+ }, -+ { -+ .fourcc = V4L2_PIX_FMT_Y10, -+ .mbus_code = MEDIA_BUS_FMT_Y10_1X10, -+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN, -+ }, -+ -+}; -+ -+static void isc_sama7g5_config_csc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ /* Convert RGB to YUV */ -+ regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc, -+ 0x42 | (0x81 << 16)); -+ regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc, -+ 0x19 | (0x10 << 16)); -+ regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc, -+ 0xFDA | (0xFB6 << 16)); -+ regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc, -+ 0x70 | (0x80 << 16)); -+ regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc, -+ 0x70 | (0xFA2 << 16)); -+ regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc, -+ 0xFEE | (0x80 << 16)); -+} -+ -+static void isc_sama7g5_config_cbc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ /* Configure what is set via v4l2 ctrls */ -+ regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc, isc->ctrls.brightness); -+ regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc, isc->ctrls.contrast); -+ /* Configure Hue and Saturation as neutral midpoint */ -+ regmap_write(regmap, ISC_CBCHS_HUE, 0); -+ regmap_write(regmap, ISC_CBCHS_SAT, (1 << 4)); -+} -+ -+static void isc_sama7g5_config_cc(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ /* Configure each register at the neutral fixed point 1.0 or 0.0 */ -+ regmap_write(regmap, ISC_CC_RR_RG, (1 << 8)); -+ regmap_write(regmap, ISC_CC_RB_OR, 0); -+ regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16); -+ regmap_write(regmap, ISC_CC_GB_OG, 0); -+ regmap_write(regmap, ISC_CC_BR_BG, 0); -+ regmap_write(regmap, ISC_CC_BB_OB, (1 << 8)); -+} -+ -+static void isc_sama7g5_config_ctrls(struct isc_device *isc, -+ const struct v4l2_ctrl_ops *ops) -+{ -+ struct isc_ctrls *ctrls = &isc->ctrls; -+ struct v4l2_ctrl_handler *hdl = &ctrls->handler; -+ -+ ctrls->contrast = 16; -+ -+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 16); -+} -+ -+static void isc_sama7g5_config_dpc(struct isc_device *isc) -+{ -+ u32 bay_cfg = isc->config.sd_format->cfa_baycfg; -+ struct regmap *regmap = isc->regmap; -+ -+ regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BLOFF_MASK, -+ (64 << ISC_DPC_CFG_BLOFF_SHIFT)); -+ regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BAYCFG_MASK, -+ (bay_cfg << ISC_DPC_CFG_BAYCFG_SHIFT)); -+} -+ -+static void isc_sama7g5_config_gam(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ -+ regmap_update_bits(regmap, ISC_GAM_CTRL, ISC_GAM_CTRL_BIPART, -+ ISC_GAM_CTRL_BIPART); -+} -+ -+static void isc_sama7g5_config_rlp(struct isc_device *isc) -+{ -+ struct regmap *regmap = isc->regmap; -+ u32 rlp_mode = isc->config.rlp_cfg_mode; -+ -+ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, -+ ISC_RLP_CFG_MODE_MASK | ISC_RLP_CFG_LSH | -+ ISC_RLP_CFG_YMODE_MASK, rlp_mode); -+} -+ -+static void isc_sama7g5_adapt_pipeline(struct isc_device *isc) -+{ -+ isc->try_config.bits_pipeline &= ISC_SAMA7G5_PIPELINE; -+} -+ -+/* Gamma table with gamma 1/2.2 */ -+static const u32 isc_sama7g5_gamma_table[][GAMMA_ENTRIES] = { -+ /* index 0 --> gamma bipartite */ -+ { -+ 0x980, 0x4c0320, 0x650260, 0x7801e0, 0x8701a0, 0x940180, -+ 0xa00160, 0xab0120, 0xb40120, 0xbd0120, 0xc60100, 0xce0100, -+ 0xd600e0, 0xdd00e0, 0xe400e0, 0xeb00c0, 0xf100c0, 0xf700c0, -+ 0xfd00c0, 0x10300a0, 0x10800c0, 0x10e00a0, 0x11300a0, 0x11800a0, -+ 0x11d00a0, 0x12200a0, 0x12700a0, 0x12c0080, 0x13000a0, 0x1350080, -+ 0x13900a0, 0x13e0080, 0x1420076, 0x17d0062, 0x1ae0054, 0x1d8004a, -+ 0x1fd0044, 0x21f003e, 0x23e003a, 0x25b0036, 0x2760032, 0x28f0030, -+ 0x2a7002e, 0x2be002c, 0x2d4002c, 0x2ea0028, 0x2fe0028, 0x3120026, -+ 0x3250024, 0x3370024, 0x3490022, 0x35a0022, 0x36b0020, 0x37b0020, -+ 0x38b0020, 0x39b001e, 0x3aa001e, 0x3b9001c, 0x3c7001c, 0x3d5001c, -+ 0x3e3001c, 0x3f1001c, 0x3ff001a, 0x40c001a }, -+}; -+ -+static int xisc_parse_dt(struct device *dev, struct isc_device *isc) -+{ -+ struct device_node *np = dev->of_node; -+ struct device_node *epn = NULL; -+ struct isc_subdev_entity *subdev_entity; -+ unsigned int flags; -+ int ret; -+ bool mipi_mode; -+ -+ INIT_LIST_HEAD(&isc->subdev_entities); -+ -+ mipi_mode = of_property_read_bool(np, "microchip,mipi-mode"); -+ -+ while (1) { -+ struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 }; -+ -+ epn = of_graph_get_next_endpoint(np, epn); -+ if (!epn) -+ return 0; -+ -+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn), -+ &v4l2_epn); -+ if (ret) { -+ ret = -EINVAL; -+ dev_err(dev, "Could not parse the endpoint\n"); -+ break; -+ } -+ -+ subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity), -+ GFP_KERNEL); -+ if (!subdev_entity) { -+ ret = -ENOMEM; -+ break; -+ } -+ subdev_entity->epn = epn; -+ -+ flags = v4l2_epn.bus.parallel.flags; -+ -+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) -+ subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_LOW; -+ -+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) -+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_LOW; -+ -+ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) -+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW; -+ -+ if (v4l2_epn.bus_type == V4L2_MBUS_BT656) -+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC | -+ ISC_PFE_CFG0_CCIR656; -+ -+ if (mipi_mode) -+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_MIPI; -+ -+ list_add_tail(&subdev_entity->list, &isc->subdev_entities); -+ } -+ of_node_put(epn); -+ -+ return ret; -+} -+ -+static int microchip_xisc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct isc_device *isc; -+ struct resource *res; -+ void __iomem *io_base; -+ struct isc_subdev_entity *subdev_entity; -+ int irq; -+ int ret; -+ u32 ver; -+ -+ isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL); -+ if (!isc) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, isc); -+ isc->dev = dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ io_base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(io_base)) -+ return PTR_ERR(io_base); -+ -+ isc->regmap = devm_regmap_init_mmio(dev, io_base, &isc_regmap_config); -+ if (IS_ERR(isc->regmap)) { -+ ret = PTR_ERR(isc->regmap); -+ dev_err(dev, "failed to init register map: %d\n", ret); -+ return ret; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return irq; -+ -+ ret = devm_request_irq(dev, irq, isc_interrupt, 0, -+ "microchip-sama7g5-xisc", isc); -+ if (ret < 0) { -+ dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n", -+ irq, ret); -+ return ret; -+ } -+ -+ isc->gamma_table = isc_sama7g5_gamma_table; -+ isc->gamma_max = 0; -+ -+ isc->max_width = ISC_SAMA7G5_MAX_SUPPORT_WIDTH; -+ isc->max_height = ISC_SAMA7G5_MAX_SUPPORT_HEIGHT; -+ -+ isc->config_dpc = isc_sama7g5_config_dpc; -+ isc->config_csc = isc_sama7g5_config_csc; -+ isc->config_cbc = isc_sama7g5_config_cbc; -+ isc->config_cc = isc_sama7g5_config_cc; -+ isc->config_gam = isc_sama7g5_config_gam; -+ isc->config_rlp = isc_sama7g5_config_rlp; -+ isc->config_ctrls = isc_sama7g5_config_ctrls; -+ -+ isc->adapt_pipeline = isc_sama7g5_adapt_pipeline; -+ -+ isc->offsets.csc = ISC_SAMA7G5_CSC_OFFSET; -+ isc->offsets.cbc = ISC_SAMA7G5_CBC_OFFSET; -+ isc->offsets.sub422 = ISC_SAMA7G5_SUB422_OFFSET; -+ isc->offsets.sub420 = ISC_SAMA7G5_SUB420_OFFSET; -+ isc->offsets.rlp = ISC_SAMA7G5_RLP_OFFSET; -+ isc->offsets.his = ISC_SAMA7G5_HIS_OFFSET; -+ isc->offsets.dma = ISC_SAMA7G5_DMA_OFFSET; -+ isc->offsets.version = ISC_SAMA7G5_VERSION_OFFSET; -+ isc->offsets.his_entry = ISC_SAMA7G5_HIS_ENTRY_OFFSET; -+ -+ isc->controller_formats = sama7g5_controller_formats; -+ isc->controller_formats_size = ARRAY_SIZE(sama7g5_controller_formats); -+ isc->formats_list = sama7g5_formats_list; -+ isc->formats_list_size = ARRAY_SIZE(sama7g5_formats_list); -+ -+ /* sama7g5-isc RAM access port is full AXI4 - 32 bits per beat */ -+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS32 | ISC_DCFG_CMBSIZE_BEATS32; -+ -+ ret = isc_pipeline_init(isc); -+ if (ret) -+ return ret; -+ -+ isc->hclock = devm_clk_get(dev, "hclock"); -+ if (IS_ERR(isc->hclock)) { -+ ret = PTR_ERR(isc->hclock); -+ dev_err(dev, "failed to get hclock: %d\n", ret); -+ return ret; -+ } -+ -+ ret = clk_prepare_enable(isc->hclock); -+ if (ret) { -+ dev_err(dev, "failed to enable hclock: %d\n", ret); -+ return ret; -+ } -+ -+ ret = isc_clk_init(isc); -+ if (ret) { -+ dev_err(dev, "failed to init isc clock: %d\n", ret); -+ goto unprepare_hclk; -+ } -+ -+ isc->ispck = isc->isc_clks[ISC_ISPCK].clk; -+ -+ ret = clk_prepare_enable(isc->ispck); -+ if (ret) { -+ dev_err(dev, "failed to enable ispck: %d\n", ret); -+ goto unprepare_hclk; -+ } -+ -+ /* ispck should be greater or equal to hclock */ -+ ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock)); -+ if (ret) { -+ dev_err(dev, "failed to set ispck rate: %d\n", ret); -+ goto unprepare_clk; -+ } -+ -+ ret = v4l2_device_register(dev, &isc->v4l2_dev); -+ if (ret) { -+ dev_err(dev, "unable to register v4l2 device.\n"); -+ goto unprepare_clk; -+ } -+ -+ ret = xisc_parse_dt(dev, isc); -+ if (ret) { -+ dev_err(dev, "fail to parse device tree\n"); -+ goto unregister_v4l2_device; -+ } -+ -+ if (list_empty(&isc->subdev_entities)) { -+ dev_err(dev, "no subdev found\n"); -+ ret = -ENODEV; -+ goto unregister_v4l2_device; -+ } -+ -+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list) { -+ struct v4l2_async_subdev *asd; -+ -+ v4l2_async_notifier_init(&subdev_entity->notifier); -+ -+ asd = v4l2_async_notifier_add_fwnode_remote_subdev( -+ &subdev_entity->notifier, -+ of_fwnode_handle(subdev_entity->epn), -+ struct v4l2_async_subdev); -+ -+ of_node_put(subdev_entity->epn); -+ subdev_entity->epn = NULL; -+ -+ if (IS_ERR(asd)) { -+ ret = PTR_ERR(asd); -+ goto cleanup_subdev; -+ } -+ -+ subdev_entity->notifier.ops = &isc_async_ops; -+ -+ ret = v4l2_async_notifier_register(&isc->v4l2_dev, -+ &subdev_entity->notifier); -+ if (ret) { -+ dev_err(dev, "fail to register async notifier\n"); -+ goto cleanup_subdev; -+ } -+ -+ if (video_is_registered(&isc->video_dev)) -+ break; -+ } -+ -+ pm_runtime_set_active(dev); -+ pm_runtime_enable(dev); -+ pm_request_idle(dev); -+ -+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver); -+ dev_info(dev, "Microchip XISC version %x\n", ver); -+ -+ return 0; -+ -+cleanup_subdev: -+ isc_subdev_cleanup(isc); -+ -+unregister_v4l2_device: -+ v4l2_device_unregister(&isc->v4l2_dev); -+ -+unprepare_clk: -+ clk_disable_unprepare(isc->ispck); -+unprepare_hclk: -+ clk_disable_unprepare(isc->hclock); -+ -+ isc_clk_cleanup(isc); -+ -+ return ret; -+} -+ -+static int microchip_xisc_remove(struct platform_device *pdev) -+{ -+ struct isc_device *isc = platform_get_drvdata(pdev); -+ -+ pm_runtime_disable(&pdev->dev); -+ -+ isc_subdev_cleanup(isc); -+ -+ v4l2_device_unregister(&isc->v4l2_dev); -+ -+ clk_disable_unprepare(isc->ispck); -+ clk_disable_unprepare(isc->hclock); -+ -+ isc_clk_cleanup(isc); -+ -+ return 0; -+} -+ -+static int __maybe_unused xisc_runtime_suspend(struct device *dev) -+{ -+ struct isc_device *isc = dev_get_drvdata(dev); -+ -+ clk_disable_unprepare(isc->ispck); -+ clk_disable_unprepare(isc->hclock); -+ -+ return 0; -+} -+ -+static int __maybe_unused xisc_runtime_resume(struct device *dev) -+{ -+ struct isc_device *isc = dev_get_drvdata(dev); -+ int ret; -+ -+ ret = clk_prepare_enable(isc->hclock); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(isc->ispck); -+ if (ret) -+ clk_disable_unprepare(isc->hclock); -+ -+ return ret; -+} -+ -+static const struct dev_pm_ops microchip_xisc_dev_pm_ops = { -+ SET_RUNTIME_PM_OPS(xisc_runtime_suspend, xisc_runtime_resume, NULL) -+}; -+ -+static const struct of_device_id microchip_xisc_of_match[] = { -+ { .compatible = "microchip,sama7g5-isc" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, microchip_xisc_of_match); -+ -+static struct platform_driver microchip_xisc_driver = { -+ .probe = microchip_xisc_probe, -+ .remove = microchip_xisc_remove, -+ .driver = { -+ .name = "microchip-sama7g5-xisc", -+ .pm = µchip_xisc_dev_pm_ops, -+ .of_match_table = of_match_ptr(microchip_xisc_of_match), -+ }, -+}; -+ -+module_platform_driver(microchip_xisc_driver); -+ -+MODULE_AUTHOR("Eugen Hristev "); -+MODULE_DESCRIPTION("The V4L2 driver for Microchip-XISC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/at91/patches-5.15/186-ASoC-atmel-fix-shadowed-variable.patch b/target/linux/at91/patches-5.15/186-ASoC-atmel-fix-shadowed-variable.patch deleted file mode 100644 index 7e88bb39ce..0000000000 --- a/target/linux/at91/patches-5.15/186-ASoC-atmel-fix-shadowed-variable.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 1b41c69264d7233a3e9a0aa36333ee22a5a049e9 Mon Sep 17 00:00:00 2001 -From: Pierre-Louis Bossart -Date: Fri, 26 Mar 2021 16:59:12 -0500 -Subject: [PATCH 186/247] ASoC: atmel: fix shadowed variable - -Fix cppcheck warning: - -sound/soc/atmel/atmel-classd.c:51:14: style: Local variable 'pwm_type' -shadows outer variable [shadowVariable] - const char *pwm_type; - ^ -sound/soc/atmel/atmel-classd.c:226:27: note: Shadowed declaration -static const char * const pwm_type[] = { - ^ -sound/soc/atmel/atmel-classd.c:51:14: note: Shadow variable - const char *pwm_type; - ^ - -Signed-off-by: Pierre-Louis Bossart -Reviewed-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210326215927.936377-3-pierre-louis.bossart@linux.intel.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/atmel-classd.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/sound/soc/atmel/atmel-classd.c -+++ b/sound/soc/atmel/atmel-classd.c -@@ -48,7 +48,7 @@ static struct atmel_classd_pdata *atmel_ - { - struct device_node *np = dev->of_node; - struct atmel_classd_pdata *pdata; -- const char *pwm_type; -+ const char *pwm_type_s; - int ret; - - if (!np) { -@@ -60,8 +60,8 @@ static struct atmel_classd_pdata *atmel_ - if (!pdata) - return ERR_PTR(-ENOMEM); - -- ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type); -- if ((ret == 0) && (strcmp(pwm_type, "diff") == 0)) -+ ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type_s); -+ if ((ret == 0) && (strcmp(pwm_type_s, "diff") == 0)) - pdata->pwm_type = CLASSD_MR_PWMTYP_DIFF; - else - pdata->pwm_type = CLASSD_MR_PWMTYP_SINGLE; diff --git a/target/linux/at91/patches-5.15/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch b/target/linux/at91/patches-5.15/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch deleted file mode 100644 index ed2ae1a979..0000000000 --- a/target/linux/at91/patches-5.15/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch +++ /dev/null @@ -1,36 +0,0 @@ -From e53725fe0c7e6b52927280272f49fe5f4b4ef317 Mon Sep 17 00:00:00 2001 -From: Pierre-Louis Bossart -Date: Fri, 26 Mar 2021 16:59:13 -0500 -Subject: [PATCH 187/247] ASoC: atmel: atmel-i2s: remove useless initialization - -Cppcheck complains: - -sound/soc/atmel/atmel-i2s.c:628:6: style: Redundant initialization for 'err'. The initialized value is overwritten before it is read. [redundantInitialization] - err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0, - ^ -sound/soc/atmel/atmel-i2s.c:598:10: note: err is initialized - int err = -ENXIO; - ^ -sound/soc/atmel/atmel-i2s.c:628:6: note: err is overwritten - err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0, - ^ - -Signed-off-by: Pierre-Louis Bossart -Reviewed-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210326215927.936377-4-pierre-louis.bossart@linux.intel.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/atmel-i2s.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/sound/soc/atmel/atmel-i2s.c -+++ b/sound/soc/atmel/atmel-i2s.c -@@ -613,7 +613,7 @@ static int atmel_i2s_probe(struct platfo - struct regmap *regmap; - void __iomem *base; - int irq; -- int err = -ENXIO; -+ int err; - unsigned int pcm_flags = 0; - unsigned int version; - diff --git a/target/linux/at91/patches-5.15/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch b/target/linux/at91/patches-5.15/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch deleted file mode 100644 index bc8c7fa2b1..0000000000 --- a/target/linux/at91/patches-5.15/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch +++ /dev/null @@ -1,26 +0,0 @@ -From a6f337fdf68294cfae233724567cbeea0ae5148f Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Fri, 18 Jun 2021 18:07:40 +0300 -Subject: [PATCH 188/247] ASoC: atmel-i2s: Set symmetric sample bits - -The I2S needs to have the same sample bits for both capture and playback -streams. - -Fixes: b543e467d1a9 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller") -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210618150741.401739-1-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/atmel/atmel-i2s.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/sound/soc/atmel/atmel-i2s.c -+++ b/sound/soc/atmel/atmel-i2s.c -@@ -560,6 +560,7 @@ static struct snd_soc_dai_driver atmel_i - }, - .ops = &atmel_i2s_dai_ops, - .symmetric_rates = 1, -+ .symmetric_samplebits = 1, - }; - - static const struct snd_soc_component_driver atmel_i2s_component = { diff --git a/target/linux/at91/patches-5.15/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch b/target/linux/at91/patches-5.15/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch deleted file mode 100644 index b79ccadf92..0000000000 --- a/target/linux/at91/patches-5.15/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch +++ /dev/null @@ -1,46 +0,0 @@ -From ff83cc9f95aaba75991210312061b7fe52aaa400 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 27 May 2021 13:01:19 +0300 -Subject: [PATCH 189/247] watchdog: sama5d4_wdt: add support for sama7g5-wdt - -Add support for compatible sama7g5-wdt. -The sama7g5 wdt is the same hardware block as on sam9x60. -Adapt the driver to use the sam9x60/sama7g5 variant if either -of the two compatibles are selected (sam9x60-wdt/sama7g5-wdt). - -Signed-off-by: Eugen Hristev -Acked-by: Nicolas Ferre -Reviewed-by: Guenter Roeck -Link: https://lore.kernel.org/r/20210527100120.266796-2-eugen.hristev@microchip.com -Signed-off-by: Guenter Roeck -Signed-off-by: Wim Van Sebroeck ---- - drivers/watchdog/sama5d4_wdt.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/watchdog/sama5d4_wdt.c -+++ b/drivers/watchdog/sama5d4_wdt.c -@@ -268,8 +268,10 @@ static int sama5d4_wdt_probe(struct plat - wdd->min_timeout = MIN_WDT_TIMEOUT; - wdd->max_timeout = MAX_WDT_TIMEOUT; - wdt->last_ping = jiffies; -- wdt->sam9x60_support = of_device_is_compatible(dev->of_node, -- "microchip,sam9x60-wdt"); -+ -+ if (of_device_is_compatible(dev->of_node, "microchip,sam9x60-wdt") || -+ of_device_is_compatible(dev->of_node, "microchip,sama7g5-wdt")) -+ wdt->sam9x60_support = true; - - watchdog_set_drvdata(wdd, wdt); - -@@ -329,6 +331,10 @@ static const struct of_device_id sama5d4 - { - .compatible = "microchip,sam9x60-wdt", - }, -+ { -+ .compatible = "microchip,sama7g5-wdt", -+ }, -+ - { } - }; - MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match); diff --git a/target/linux/at91/patches-5.15/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch b/target/linux/at91/patches-5.15/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch deleted file mode 100644 index 60b4104442..0000000000 --- a/target/linux/at91/patches-5.15/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch +++ /dev/null @@ -1,135 +0,0 @@ -From dfcc0395f5e838c0b5c3fb93c9335b6a8892178a Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Mon, 5 Jul 2021 14:57:08 +0200 -Subject: [PATCH 190/247] media: atmel: fix build when ISC=m and XISC=y - -Building VIDEO_ATMEL_ISC as module and VIDEO_ATMEL_XISC as built-in -(or viceversa) causes build errors: - - or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o: in function `isc_async_complete': - atmel-isc-base.c:(.text+0x40d0): undefined reference to `__this_module' - or1k-linux-ld: atmel-isc-base.c:(.text+0x40f0): undefined reference to `__this_module' - or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(.rodata+0x390): undefined reference to `__this_module' - or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x4): undefined reference to `__this_module' - or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x18): undefined reference to `__this_module' - -This is caused by the file atmel-isc-base.c which is common code between -the two drivers. - -The solution is to create another Kconfig symbol that is automatically -selected and generates the module atmel-isc-base.ko. This module can be -loaded when both drivers are modules, or built-in when at least one of them -is built-in. - -Reported-by: kernel test robot -Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver") -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - drivers/media/platform/atmel/Kconfig | 8 ++++++++ - drivers/media/platform/atmel/Makefile | 5 +++-- - drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++++++ - 3 files changed, 22 insertions(+), 2 deletions(-) - ---- a/drivers/media/platform/atmel/Kconfig -+++ b/drivers/media/platform/atmel/Kconfig -@@ -8,6 +8,7 @@ config VIDEO_ATMEL_ISC - select VIDEOBUF2_DMA_CONTIG - select REGMAP_MMIO - select V4L2_FWNODE -+ select VIDEO_ATMEL_ISC_BASE - help - This module makes the ATMEL Image Sensor Controller available - as a v4l2 device. -@@ -19,10 +20,17 @@ config VIDEO_ATMEL_XISC - select VIDEOBUF2_DMA_CONTIG - select REGMAP_MMIO - select V4L2_FWNODE -+ select VIDEO_ATMEL_ISC_BASE - help - This module makes the ATMEL eXtended Image Sensor Controller - available as a v4l2 device. - -+config VIDEO_ATMEL_ISC_BASE -+ tristate -+ default n -+ help -+ ATMEL ISC and XISC common code base. -+ - config VIDEO_ATMEL_ISI - tristate "ATMEL Image Sensor Interface (ISI) support" - depends on VIDEO_V4L2 && OF ---- a/drivers/media/platform/atmel/Makefile -+++ b/drivers/media/platform/atmel/Makefile -@@ -1,7 +1,8 @@ - # SPDX-License-Identifier: GPL-2.0-only --atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o --atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o -+atmel-isc-objs = atmel-sama5d2-isc.o -+atmel-xisc-objs = atmel-sama7g5-isc.o - - obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o -+obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o - obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o - obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o ---- a/drivers/media/platform/atmel/atmel-isc-base.c -+++ b/drivers/media/platform/atmel/atmel-isc-base.c -@@ -378,6 +378,7 @@ int isc_clk_init(struct isc_device *isc) - - return 0; - } -+EXPORT_SYMBOL_GPL(isc_clk_init); - - void isc_clk_cleanup(struct isc_device *isc) - { -@@ -392,6 +393,7 @@ void isc_clk_cleanup(struct isc_device * - clk_unregister(isc_clk->clk); - } - } -+EXPORT_SYMBOL_GPL(isc_clk_cleanup); - - static int isc_queue_setup(struct vb2_queue *vq, - unsigned int *nbuffers, unsigned int *nplanes, -@@ -1575,6 +1577,7 @@ irqreturn_t isc_interrupt(int irq, void - - return ret; - } -+EXPORT_SYMBOL_GPL(isc_interrupt); - - static void isc_hist_count(struct isc_device *isc, u32 *min, u32 *max) - { -@@ -2209,6 +2212,7 @@ const struct v4l2_async_notifier_operati - .unbind = isc_async_unbind, - .complete = isc_async_complete, - }; -+EXPORT_SYMBOL_GPL(isc_async_ops); - - void isc_subdev_cleanup(struct isc_device *isc) - { -@@ -2221,6 +2225,7 @@ void isc_subdev_cleanup(struct isc_devic - - INIT_LIST_HEAD(&isc->subdev_entities); - } -+EXPORT_SYMBOL_GPL(isc_subdev_cleanup); - - int isc_pipeline_init(struct isc_device *isc) - { -@@ -2261,6 +2266,7 @@ int isc_pipeline_init(struct isc_device - - return 0; - } -+EXPORT_SYMBOL_GPL(isc_pipeline_init); - - /* regmap configuration */ - #define ATMEL_ISC_REG_MAX 0xd5c -@@ -2270,4 +2276,9 @@ const struct regmap_config isc_regmap_co - .val_bits = 32, - .max_register = ATMEL_ISC_REG_MAX, - }; -+EXPORT_SYMBOL_GPL(isc_regmap_config); - -+MODULE_AUTHOR("Songjun Wu"); -+MODULE_AUTHOR("Eugen Hristev"); -+MODULE_DESCRIPTION("Atmel ISC common code base"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/at91/patches-5.15/191-i2c-at91-remove-define-CONFIG_PM.patch b/target/linux/at91/patches-5.15/191-i2c-at91-remove-define-CONFIG_PM.patch deleted file mode 100644 index 27ee1b6d19..0000000000 --- a/target/linux/at91/patches-5.15/191-i2c-at91-remove-define-CONFIG_PM.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 023a6b46536dce41f2c5a7425826fc4da4509b8f Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 5 Jul 2021 15:15:16 +0300 -Subject: [PATCH 191/247] i2c: at91: remove #define CONFIG_PM - -Remove #define CONFIG_PM and use __maybe_unused for PM functions and -pm_ptr() for PM ops. - -Signed-off-by: Claudiu Beznea -Reviewed-by: Codrin Ciubotariu -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-at91-core.c | 17 +++++------------ - 1 file changed, 5 insertions(+), 12 deletions(-) - ---- a/drivers/i2c/busses/i2c-at91-core.c -+++ b/drivers/i2c/busses/i2c-at91-core.c -@@ -286,9 +286,7 @@ static int at91_twi_remove(struct platfo - return 0; - } - --#ifdef CONFIG_PM -- --static int at91_twi_runtime_suspend(struct device *dev) -+static int __maybe_unused at91_twi_runtime_suspend(struct device *dev) - { - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); - -@@ -299,7 +297,7 @@ static int at91_twi_runtime_suspend(stru - return 0; - } - --static int at91_twi_runtime_resume(struct device *dev) -+static int __maybe_unused at91_twi_runtime_resume(struct device *dev) - { - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); - -@@ -308,7 +306,7 @@ static int at91_twi_runtime_resume(struc - return clk_prepare_enable(twi_dev->clk); - } - --static int at91_twi_suspend_noirq(struct device *dev) -+static int __maybe_unused at91_twi_suspend_noirq(struct device *dev) - { - if (!pm_runtime_status_suspended(dev)) - at91_twi_runtime_suspend(dev); -@@ -316,7 +314,7 @@ static int at91_twi_suspend_noirq(struct - return 0; - } - --static int at91_twi_resume_noirq(struct device *dev) -+static int __maybe_unused at91_twi_resume_noirq(struct device *dev) - { - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); - int ret; -@@ -342,11 +340,6 @@ static const struct dev_pm_ops at91_twi_ - .runtime_resume = at91_twi_runtime_resume, - }; - --#define at91_twi_pm_ops (&at91_twi_pm) --#else --#define at91_twi_pm_ops NULL --#endif -- - static struct platform_driver at91_twi_driver = { - .probe = at91_twi_probe, - .remove = at91_twi_remove, -@@ -354,7 +347,7 @@ static struct platform_driver at91_twi_d - .driver = { - .name = "at91_i2c", - .of_match_table = of_match_ptr(atmel_twi_dt_ids), -- .pm = at91_twi_pm_ops, -+ .pm = pm_ptr(&at91_twi_pm), - }, - }; - diff --git a/target/linux/at91/patches-5.15/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch b/target/linux/at91/patches-5.15/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch deleted file mode 100644 index 6220c1dab2..0000000000 --- a/target/linux/at91/patches-5.15/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 1c906a59a60887e1b997ebab63f19f33a1c69a3e Mon Sep 17 00:00:00 2001 -From: Codrin Ciubotariu -Date: Tue, 3 Aug 2021 13:48:25 +0300 -Subject: [PATCH 192/247] ASoC: codecs: ad193x: add support for 96kHz and - 192kHz playback rates - -ad193x devices support 96KHz and 192KHz sampling rates, when PLL/MCLK is -referenced to 48kHz. -Tested on ad1934. - -Signed-off-by: Codrin Ciubotariu -Link: https://lore.kernel.org/r/20210803104825.2198335-1-codrin.ciubotariu@microchip.com -Signed-off-by: Mark Brown ---- - sound/soc/codecs/ad193x.c | 30 ++++++++++++++++++++++++++++-- - sound/soc/codecs/ad193x.h | 4 ++++ - 2 files changed, 32 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/ad193x.c -+++ b/sound/soc/codecs/ad193x.c -@@ -316,6 +316,13 @@ static int ad193x_hw_params(struct snd_p - int word_len = 0, master_rate = 0; - struct snd_soc_component *component = dai->component; - struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component); -+ bool is_playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; -+ u8 dacc0; -+ -+ dev_dbg(dai->dev, "%s() rate=%u format=%#x width=%u channels=%u\n", -+ __func__, params_rate(params), params_format(params), -+ params_width(params), params_channels(params)); -+ - - /* bit size */ - switch (params_width(params)) { -@@ -346,6 +353,25 @@ static int ad193x_hw_params(struct snd_p - break; - } - -+ if (is_playback) { -+ switch (params_rate(params)) { -+ case 48000: -+ dacc0 = AD193X_DAC_SR_48; -+ break; -+ case 96000: -+ dacc0 = AD193X_DAC_SR_96; -+ break; -+ case 192000: -+ dacc0 = AD193X_DAC_SR_192; -+ break; -+ default: -+ dev_err(dai->dev, "invalid sampling rate: %d\n", params_rate(params)); -+ return -EINVAL; -+ } -+ -+ regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL0, AD193X_DAC_SR_MASK, dacc0); -+ } -+ - regmap_update_bits(ad193x->regmap, AD193X_PLL_CLK_CTRL0, - AD193X_PLL_INPUT_MASK, master_rate); - -@@ -385,7 +411,7 @@ static struct snd_soc_dai_driver ad193x_ - .stream_name = "Playback", - .channels_min = 2, - .channels_max = 8, -- .rates = SNDRV_PCM_RATE_48000, -+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000, - .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE | - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE, - }, -@@ -407,7 +433,7 @@ static struct snd_soc_dai_driver ad193x_ - .stream_name = "Playback", - .channels_min = 2, - .channels_max = 8, -- .rates = SNDRV_PCM_RATE_48000, -+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000, - .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE | - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE, - }, ---- a/sound/soc/codecs/ad193x.h -+++ b/sound/soc/codecs/ad193x.h -@@ -37,6 +37,10 @@ int ad193x_probe(struct device *dev, str - #define AD193X_PLL_CLK_SRC_MCLK (1 << 1) - #define AD193X_DAC_CTRL0 0x02 - #define AD193X_DAC_POWERDOWN 0x01 -+#define AD193X_DAC_SR_MASK 0x06 -+#define AD193X_DAC_SR_48 (0 << 1) -+#define AD193X_DAC_SR_96 (1 << 1) -+#define AD193X_DAC_SR_192 (2 << 1) - #define AD193X_DAC_SERFMT_MASK 0xC0 - #define AD193X_DAC_SERFMT_STEREO (0 << 6) - #define AD193X_DAC_SERFMT_TDM (1 << 6) diff --git a/target/linux/at91/patches-5.15/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch b/target/linux/at91/patches-5.15/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch deleted file mode 100644 index a554a288a5..0000000000 --- a/target/linux/at91/patches-5.15/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 21261e30679118b96ed537d1cdf9e12682fc1b29 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Wed, 9 Jun 2021 15:00:28 +0200 -Subject: [PATCH 193/247] media: atmel: atmel-sama5d2-isc: fix YUYV format - -SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting, -packaging) module. -The YCYC field is supposed to work with interleaved YUV formats like YUYV. -In SAMA5D2, we have to use YYCC field, which is used for both planar -formats like YUV420 and interleaved formats like YUYV. -Fix the according rlp callback to replace the generic YCYC field (which -makes more sense from a logical point of view) with the required YYCC -field. - -Fixes: debfa496871c ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules") -Signed-off-by: Eugen Hristev -Signed-off-by: Hans Verkuil -Signed-off-by: Mauro Carvalho Chehab ---- - .../media/platform/atmel/atmel-sama5d2-isc.c | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c -+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c -@@ -255,6 +255,23 @@ static void isc_sama5d2_config_rlp(struc - struct regmap *regmap = isc->regmap; - u32 rlp_mode = isc->config.rlp_cfg_mode; - -+ /* -+ * In sama5d2, the YUV planar modes and the YUYV modes are treated -+ * in the same way in RLP register. -+ * Normally, YYCC mode should be Luma(n) - Color B(n) - Color R (n) -+ * and YCYC should be Luma(n + 1) - Color B (n) - Luma (n) - Color R (n) -+ * but in sama5d2, the YCYC mode does not exist, and YYCC must be -+ * selected for both planar and interleaved modes, as in fact -+ * both modes are supported. -+ * -+ * Thus, if the YCYC mode is selected, replace it with the -+ * sama5d2-compliant mode which is YYCC . -+ */ -+ if ((rlp_mode & ISC_RLP_CFG_MODE_YCYC) == ISC_RLP_CFG_MODE_YCYC) { -+ rlp_mode &= ~ISC_RLP_CFG_MODE_MASK; -+ rlp_mode |= ISC_RLP_CFG_MODE_YYCC; -+ } -+ - regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp, - ISC_RLP_CFG_MODE_MASK, rlp_mode); - } diff --git a/target/linux/at91/patches-5.15/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch b/target/linux/at91/patches-5.15/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch deleted file mode 100644 index dd221f5be9..0000000000 --- a/target/linux/at91/patches-5.15/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 602f85ff15d45bd313f8f6600d72202a50fd83a9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 19 Jul 2021 11:03:17 +0300 -Subject: [PATCH 194/247] clk: at91: add register definition for sama7g5's - master clock - -Add register definitions for SAMA7G5's master clock. These would be -also used by architecture specific power saving code. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com ---- - include/linux/clk/at91_pmc.h | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - ---- a/include/linux/clk/at91_pmc.h -+++ b/include/linux/clk/at91_pmc.h -@@ -137,6 +137,32 @@ - #define AT91_PMC_PLLADIV2_ON (1 << 12) - #define AT91_PMC_H32MXDIV BIT(24) - -+#define AT91_PMC_MCR_V2 0x30 /* Master Clock Register [SAMA7G5 only] */ -+#define AT91_PMC_MCR_V2_ID_MSK (0xF) -+#define AT91_PMC_MCR_V2_ID(_id) ((_id) & AT91_PMC_MCR_V2_ID_MSK) -+#define AT91_PMC_MCR_V2_CMD (1 << 7) -+#define AT91_PMC_MCR_V2_DIV (7 << 8) -+#define AT91_PMC_MCR_V2_DIV1 (0 << 8) -+#define AT91_PMC_MCR_V2_DIV2 (1 << 8) -+#define AT91_PMC_MCR_V2_DIV4 (2 << 8) -+#define AT91_PMC_MCR_V2_DIV8 (3 << 8) -+#define AT91_PMC_MCR_V2_DIV16 (4 << 8) -+#define AT91_PMC_MCR_V2_DIV32 (5 << 8) -+#define AT91_PMC_MCR_V2_DIV64 (6 << 8) -+#define AT91_PMC_MCR_V2_DIV3 (7 << 8) -+#define AT91_PMC_MCR_V2_CSS (0x1F << 16) -+#define AT91_PMC_MCR_V2_CSS_MD_SLCK (0 << 16) -+#define AT91_PMC_MCR_V2_CSS_TD_SLCK (1 << 16) -+#define AT91_PMC_MCR_V2_CSS_MAINCK (2 << 16) -+#define AT91_PMC_MCR_V2_CSS_MCK0 (3 << 16) -+#define AT91_PMC_MCR_V2_CSS_SYSPLL (5 << 16) -+#define AT91_PMC_MCR_V2_CSS_DDRPLL (6 << 16) -+#define AT91_PMC_MCR_V2_CSS_IMGPLL (7 << 16) -+#define AT91_PMC_MCR_V2_CSS_BAUDPLL (8 << 16) -+#define AT91_PMC_MCR_V2_CSS_AUDIOPLL (9 << 16) -+#define AT91_PMC_MCR_V2_CSS_ETHPLL (10 << 16) -+#define AT91_PMC_MCR_V2_EN (1 << 28) -+ - #define AT91_PMC_XTALF 0x34 /* Main XTAL Frequency Register [SAMA7G5 only] */ - - #define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ diff --git a/target/linux/at91/patches-5.15/195-ARM-at91-add-new-SoC-sama7g5.patch b/target/linux/at91/patches-5.15/195-ARM-at91-add-new-SoC-sama7g5.patch deleted file mode 100644 index 1d6b45ac94..0000000000 --- a/target/linux/at91/patches-5.15/195-ARM-at91-add-new-SoC-sama7g5.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 32bac6971d0572f67758f9a8c8af7bf4592f1675 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 9 Apr 2021 14:31:15 +0300 -Subject: [PATCH 195/247] ARM: at91: add new SoC sama7g5 - -Add new SoC from at91 family : sama7g5 - -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: Select PLL, generic clock and UTMI support, add PM configs] -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210409113116.482199-1-eugen.hristev@microchip.com -Link: https://lore.kernel.org/r/20210719080317.1045832-2-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/Kconfig | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/arch/arm/mach-at91/Kconfig -+++ b/arch/arm/mach-at91/Kconfig -@@ -57,6 +57,16 @@ config SOC_SAMA5D4 - help - Select this if you are using one of Microchip's SAMA5D4 family SoC. - -+config SOC_SAMA7G5 -+ bool "SAMA7G5 family" -+ depends on ARCH_MULTI_V7 -+ select HAVE_AT91_GENERATED_CLK -+ select HAVE_AT91_SAM9X60_PLL -+ select HAVE_AT91_UTMI -+ select SOC_SAMA7 -+ help -+ Select this if you are using one of Microchip's SAMA7G5 family SoC. -+ - config SOC_AT91RM9200 - bool "AT91RM9200" - depends on ARCH_MULTI_V4T -@@ -191,4 +201,12 @@ config SOC_SAMA5 - config ATMEL_PM - bool - -+config SOC_SAMA7 -+ bool -+ select ARM_GIC -+ select ATMEL_PM if PM -+ select ATMEL_SDRAMC -+ select MEMORY -+ select SOC_SAM_V7 -+ select SRAM if PM - endif diff --git a/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch b/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch deleted file mode 100644 index c99a2d5219..0000000000 --- a/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 3de4879bf59b46a966ea226a67df70b88f43a23e Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Fri, 9 Apr 2021 14:31:16 +0300 -Subject: [PATCH 196/247] ARM: at91: debug: add sama7g5 low level debug uart - -Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the -ROM bootloader uses. - -Signed-off-by: Eugen Hristev -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210409113116.482199-2-eugen.hristev@microchip.com -[claudiu.beznea: adapt to v5.10.27] -Signed-off-by: Claudiu Beznea ---- - arch/arm/Kconfig.debug | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -191,6 +191,14 @@ choice - their output to the USART1 port on SAMV7 based - machines. - -+ config DEBUG_AT91_SAMA7G5_FLEXCOM3 -+ bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" -+ select DEBUG_AT91_UART -+ depends on SOC_SAMA7G5 -+ help -+ Say Y here if you want kernel low-level debugging support -+ on the FLEXCOM3 port of SAMA7G5. -+ - config DEBUG_BCM2835 - bool "Kernel low-level debugging on BCM2835 PL011 UART" - depends on ARCH_BCM2835 && ARCH_MULTI_V6 -@@ -1731,6 +1739,7 @@ config DEBUG_UART_PHYS - default 0xd4017000 if DEBUG_MMP_UART2 - default 0xd4018000 if DEBUG_MMP_UART3 - default 0xe0000000 if DEBUG_SPEAR13XX -+ default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 - default 0xe4007000 if DEBUG_HIP04_UART - default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 - default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 -@@ -1791,6 +1800,7 @@ config DEBUG_UART_VIRT - default 0xc8912000 if DEBUG_RV1108_UART0 - default 0xe0010fe0 if ARCH_RPC - default 0xf0000be0 if ARCH_EBSA110 -+ default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 - default 0xf0010000 if DEBUG_ASM9260_UART - default 0xf0100000 if DEBUG_DIGICOLOR_UA0 - default 0xf01fb000 if DEBUG_NOMADIK_UART diff --git a/target/linux/at91/patches-5.15/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch b/target/linux/at91/patches-5.15/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch deleted file mode 100644 index dfd47d55d2..0000000000 --- a/target/linux/at91/patches-5.15/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch +++ /dev/null @@ -1,87 +0,0 @@ -From e41d00bdaa31b36fd314e927104082615aa4643a Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:47 +0300 -Subject: [PATCH 197/247] ARM: at91: pm: move pm_bu to soc_pm data structure - -Move pm_bu to soc_pm data structure. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-2-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 34 +++++++++++++++++++++------------- - 1 file changed, 21 insertions(+), 13 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -27,10 +27,25 @@ - #include "generic.h" - #include "pm.h" - -+/** -+ * struct at91_pm_bu - AT91 power management backup unit data structure -+ * @suspended: true if suspended to backup mode -+ * @reserved: reserved -+ * @canary: canary data for memory checking after exit from backup mode -+ * @resume: resume API -+ */ -+struct at91_pm_bu { -+ int suspended; -+ unsigned long reserved; -+ phys_addr_t canary; -+ phys_addr_t resume; -+}; -+ - struct at91_soc_pm { - int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); - int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); - const struct of_device_id *ws_ids; -+ struct at91_pm_bu *bu; - struct at91_pm_data data; - }; - -@@ -71,13 +86,6 @@ static int at91_pm_valid_state(suspend_s - - static int canary = 0xA5A5A5A5; - --static struct at91_pm_bu { -- int suspended; -- unsigned long reserved; -- phys_addr_t canary; -- phys_addr_t resume; --} *pm_bu; -- - struct wakeup_source_info { - unsigned int pmc_fsmr_bit; - unsigned int shdwc_mr_bit; -@@ -288,7 +296,7 @@ static int at91_suspend_finish(unsigned - static void at91_pm_suspend(suspend_state_t state) - { - if (soc_pm.data.mode == AT91_PM_BACKUP) { -- pm_bu->suspended = 1; -+ soc_pm.bu->suspended = 1; - - cpu_suspend(0, at91_suspend_finish); - -@@ -672,16 +680,16 @@ static int __init at91_pm_backup_init(vo - goto securam_fail; - } - -- pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); -- if (!pm_bu) { -+ soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); -+ if (!soc_pm.bu) { - pr_warn("%s: unable to alloc securam!\n", __func__); - ret = -ENOMEM; - goto securam_fail; - } - -- pm_bu->suspended = 0; -- pm_bu->canary = __pa_symbol(&canary); -- pm_bu->resume = __pa_symbol(cpu_resume); -+ soc_pm.bu->suspended = 0; -+ soc_pm.bu->canary = __pa_symbol(&canary); -+ soc_pm.bu->resume = __pa_symbol(cpu_resume); - - return 0; - diff --git a/target/linux/at91/patches-5.15/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch b/target/linux/at91/patches-5.15/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch deleted file mode 100644 index 5b484b7343..0000000000 --- a/target/linux/at91/patches-5.15/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch +++ /dev/null @@ -1,55 +0,0 @@ -From c8f2a8aaae41fa0a40ad88855ae82696098230d7 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:48 +0300 -Subject: [PATCH 198/247] ARM: at91: pm: move the setup of soc_pm.bu->suspended - -Move the setup of soc_pm.bu->suspended in platform_suspend::begin -function so that the PMC code in charge with clocks suspend/resume -to differentiate b/w standard PM mode and backup mode. - -Signed-off-by: Claudiu Beznea -Reviewed-by: Alexandre Belloni -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-3-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 15 ++++++++++++--- - 1 file changed, 12 insertions(+), 3 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -214,6 +214,8 @@ static int at91_sam9x60_config_pmc_ws(vo - */ - static int at91_pm_begin(suspend_state_t state) - { -+ int ret; -+ - switch (state) { - case PM_SUSPEND_MEM: - soc_pm.data.mode = soc_pm.data.suspend_mode; -@@ -227,7 +229,16 @@ static int at91_pm_begin(suspend_state_t - soc_pm.data.mode = -1; - } - -- return at91_pm_config_ws(soc_pm.data.mode, true); -+ ret = at91_pm_config_ws(soc_pm.data.mode, true); -+ if (ret) -+ return ret; -+ -+ if (soc_pm.data.mode == AT91_PM_BACKUP) -+ soc_pm.bu->suspended = 1; -+ else if (soc_pm.bu) -+ soc_pm.bu->suspended = 0; -+ -+ return 0; - } - - /* -@@ -296,8 +307,6 @@ static int at91_suspend_finish(unsigned - static void at91_pm_suspend(suspend_state_t state) - { - if (soc_pm.data.mode == AT91_PM_BACKUP) { -- soc_pm.bu->suspended = 1; -- - cpu_suspend(0, at91_suspend_finish); - - /* The SRAM is lost between suspend cycles */ diff --git a/target/linux/at91/patches-5.15/199-ARM-at91-pm-document-at91_soc_pm-structure.patch b/target/linux/at91/patches-5.15/199-ARM-at91-pm-document-at91_soc_pm-structure.patch deleted file mode 100644 index 965555a11d..0000000000 --- a/target/linux/at91/patches-5.15/199-ARM-at91-pm-document-at91_soc_pm-structure.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 59a4b3b9381b727f416d9cc52e60d0bc7d93ecae Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:49 +0300 -Subject: [PATCH 199/247] ARM: at91: pm: document at91_soc_pm structure - -Document at91_soc_pm structure. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-4-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -41,6 +41,14 @@ struct at91_pm_bu { - phys_addr_t resume; - }; - -+/** -+ * struct at91_soc_pm - AT91 SoC power management data structure -+ * @config_shdwc_ws: wakeup sources configuration function for SHDWC -+ * @config_pmc_ws: wakeup srouces configuration function for PMC -+ * @ws_ids: wakup sources of_device_id array -+ * @data: PM data to be used on last phase of suspend -+ * @bu: backup unit mapped data (for backup mode) -+ */ - struct at91_soc_pm { - int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); - int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); diff --git a/target/linux/at91/patches-5.15/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch b/target/linux/at91/patches-5.15/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch deleted file mode 100644 index f15095aafd..0000000000 --- a/target/linux/at91/patches-5.15/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch +++ /dev/null @@ -1,238 +0,0 @@ -From 0c4cbd38a705bdeab11de4c84ad0ce8c3de8a81d Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:50 +0300 -Subject: [PATCH 200/247] ARM: at91: pm: check for different controllers in - at91_pm_modes_init() - -at91_pm_modes_init() checks for proper nodes in device tree and maps -them accordingly. Up to SAMA7G5 all AT91 SoCs had the same mapping -b/w power saving modes and different controllers needed in the -final/first steps of suspend/resume. SAMA7G5 is not aligned with the -old SoCs thus the code is adapted for this. This patch prepares -the field for next commits. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-5-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 143 +++++++++++++++++++++++++--------------- - 1 file changed, 91 insertions(+), 52 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -57,6 +57,18 @@ struct at91_soc_pm { - struct at91_pm_data data; - }; - -+/** -+ * enum at91_pm_iomaps: IOs that needs to be mapped for different PM modes -+ * @AT91_PM_IOMAP_SHDWC: SHDWC controller -+ * @AT91_PM_IOMAP_SFRBU: SFRBU controller -+ */ -+enum at91_pm_iomaps { -+ AT91_PM_IOMAP_SHDWC, -+ AT91_PM_IOMAP_SFRBU, -+}; -+ -+#define AT91_PM_IOMAP(name) BIT(AT91_PM_IOMAP_##name) -+ - static struct at91_soc_pm soc_pm = { - .data = { - .standby_mode = AT91_PM_STANDBY, -@@ -671,24 +683,15 @@ static int __init at91_pm_backup_init(vo - if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) - return 0; - -- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); -- if (!np) { -- pr_warn("%s: failed to find sfrbu!\n", __func__); -- return ret; -- } -- -- soc_pm.data.sfrbu = of_iomap(np, 0); -- of_node_put(np); -- - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); - if (!np) -- goto securam_fail_no_ref_dev; -+ return ret; - - pdev = of_find_device_by_node(np); - of_node_put(np); - if (!pdev) { - pr_warn("%s: failed to find securam device!\n", __func__); -- goto securam_fail_no_ref_dev; -+ return ret; - } - - sram_pool = gen_pool_get(&pdev->dev, NULL); -@@ -712,64 +715,92 @@ static int __init at91_pm_backup_init(vo - - securam_fail: - put_device(&pdev->dev); --securam_fail_no_ref_dev: -- iounmap(soc_pm.data.sfrbu); -- soc_pm.data.sfrbu = NULL; - return ret; - } - --static void __init at91_pm_use_default_mode(int pm_mode) --{ -- if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP) -- return; -- -- if (soc_pm.data.standby_mode == pm_mode) -- soc_pm.data.standby_mode = AT91_PM_ULP0; -- if (soc_pm.data.suspend_mode == pm_mode) -- soc_pm.data.suspend_mode = AT91_PM_ULP0; --} -- - static const struct of_device_id atmel_shdwc_ids[] = { - { .compatible = "atmel,sama5d2-shdwc" }, - { .compatible = "microchip,sam9x60-shdwc" }, - { /* sentinel. */ } - }; - --static void __init at91_pm_modes_init(void) -+static void __init at91_pm_modes_init(const u32 *maps, int len) - { - struct device_node *np; -- int ret; -+ int ret, mode; - -- if (!at91_is_pm_mode_active(AT91_PM_BACKUP) && -- !at91_is_pm_mode_active(AT91_PM_ULP1)) -- return; -+ ret = at91_pm_backup_init(); -+ if (ret) { -+ if (soc_pm.data.standby_mode == AT91_PM_BACKUP) -+ soc_pm.data.standby_mode = AT91_PM_ULP0; -+ if (soc_pm.data.suspend_mode == AT91_PM_BACKUP) -+ soc_pm.data.suspend_mode = AT91_PM_ULP0; -+ } -+ -+ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) || -+ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) { -+ np = of_find_matching_node(NULL, atmel_shdwc_ids); -+ if (!np) { -+ pr_warn("%s: failed to find shdwc!\n", __func__); -+ -+ /* Use ULP0 if it doesn't needs SHDWC.*/ -+ if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC))) -+ mode = AT91_PM_ULP0; -+ else -+ mode = AT91_PM_STANDBY; -+ -+ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC)) -+ soc_pm.data.standby_mode = mode; -+ if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) -+ soc_pm.data.suspend_mode = mode; -+ } else { -+ soc_pm.data.shdwc = of_iomap(np, 0); -+ of_node_put(np); -+ } -+ } - -- np = of_find_matching_node(NULL, atmel_shdwc_ids); -- if (!np) { -- pr_warn("%s: failed to find shdwc!\n", __func__); -- goto ulp1_default; -+ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) || -+ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) { -+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); -+ if (!np) { -+ pr_warn("%s: failed to find sfrbu!\n", __func__); -+ -+ /* -+ * Use ULP0 if it doesn't need SHDWC or if SHDWC -+ * was already located. -+ */ -+ if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) || -+ soc_pm.data.shdwc) -+ mode = AT91_PM_ULP0; -+ else -+ mode = AT91_PM_STANDBY; -+ -+ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU)) -+ soc_pm.data.standby_mode = mode; -+ if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) -+ soc_pm.data.suspend_mode = mode; -+ } else { -+ soc_pm.data.sfrbu = of_iomap(np, 0); -+ of_node_put(np); -+ } - } - -- soc_pm.data.shdwc = of_iomap(np, 0); -- of_node_put(np); -+ /* Unmap all unnecessary. */ -+ if (soc_pm.data.shdwc && -+ !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) || -+ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) { -+ iounmap(soc_pm.data.shdwc); -+ soc_pm.data.shdwc = NULL; -+ } - -- ret = at91_pm_backup_init(); -- if (ret) { -- if (!at91_is_pm_mode_active(AT91_PM_ULP1)) -- goto unmap; -- else -- goto backup_default; -+ if (soc_pm.data.sfrbu && -+ !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) || -+ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) { -+ iounmap(soc_pm.data.sfrbu); -+ soc_pm.data.sfrbu = NULL; - } - - return; -- --unmap: -- iounmap(soc_pm.data.shdwc); -- soc_pm.data.shdwc = NULL; --ulp1_default: -- at91_pm_use_default_mode(AT91_PM_ULP1); --backup_default: -- at91_pm_use_default_mode(AT91_PM_BACKUP); - } - - struct pmc_info { -@@ -936,13 +967,16 @@ void __init sam9x60_pm_init(void) - static const int modes[] __initconst = { - AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1, - }; -+ static const int iomaps[] __initconst = { -+ [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC), -+ }; - int ret; - - if (!IS_ENABLED(CONFIG_SOC_SAM9X60)) - return; - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); -- at91_pm_modes_init(); -+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); - ret = at91_dt_ramc(); - if (ret) - return; -@@ -999,13 +1033,18 @@ void __init sama5d2_pm_init(void) - AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1, - AT91_PM_BACKUP, - }; -+ static const u32 iomaps[] __initconst = { -+ [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC), -+ [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) | -+ AT91_PM_IOMAP(SFRBU), -+ }; - int ret; - - if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) - return; - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); -- at91_pm_modes_init(); -+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); - ret = at91_dt_ramc(); - if (ret) - return; diff --git a/target/linux/at91/patches-5.15/201-ARM-at91-pm-do-not-initialize-pdev.patch b/target/linux/at91/patches-5.15/201-ARM-at91-pm-do-not-initialize-pdev.patch deleted file mode 100644 index 413a95a968..0000000000 --- a/target/linux/at91/patches-5.15/201-ARM-at91-pm-do-not-initialize-pdev.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 31e25503bbad1fffd29fd074a46bd4858b65304f Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:51 +0300 -Subject: [PATCH 201/247] ARM: at91: pm: do not initialize pdev - -There is no need to initialize pdev. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-6-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -674,7 +674,7 @@ static int __init at91_pm_backup_init(vo - { - struct gen_pool *sram_pool; - struct device_node *np; -- struct platform_device *pdev = NULL; -+ struct platform_device *pdev; - int ret = -ENODEV; - - if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) diff --git a/target/linux/at91/patches-5.15/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch b/target/linux/at91/patches-5.15/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch deleted file mode 100644 index a313ab029a..0000000000 --- a/target/linux/at91/patches-5.15/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 8a7a4cf3860910e460e2c3ca467b1dabf7ce9827 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:52 +0300 -Subject: [PATCH 202/247] ARM: at91: pm: use r7 instead of tmp1 - -Use r7 instead of tmp1 in macros. This prepares the filed for -next commits. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-7-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 18 ++++++++++++------ - 1 file changed, 12 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -31,30 +31,36 @@ tmp3 .req r6 - - /* - * Wait until master oscillator has stabilized. -+ * -+ * Side effects: overwrites r7 - */ - .macro wait_moscrdy --1: ldr tmp1, [pmc, #AT91_PMC_SR] -- tst tmp1, #AT91_PMC_MOSCS -+1: ldr r7, [pmc, #AT91_PMC_SR] -+ tst r7, #AT91_PMC_MOSCS - beq 1b - .endm - - /* - * Wait for main oscillator selection is done -+ * -+ * Side effects: overwrites r7 - */ - .macro wait_moscsels --1: ldr tmp1, [pmc, #AT91_PMC_SR] -- tst tmp1, #AT91_PMC_MOSCSELS -+1: ldr r7, [pmc, #AT91_PMC_SR] -+ tst r7, #AT91_PMC_MOSCSELS - beq 1b - .endm - - /* - * Put the processor to enter the idle state -+ * -+ * Side effects: overwrites r7 - */ - .macro at91_cpu_idle - - #if defined(CONFIG_CPU_V7) -- mov tmp1, #AT91_PMC_PCK -- str tmp1, [pmc, #AT91_PMC_SCDR] -+ mov r7, #AT91_PMC_PCK -+ str r7, [pmc, #AT91_PMC_SCDR] - - dsb - diff --git a/target/linux/at91/patches-5.15/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch b/target/linux/at91/patches-5.15/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch deleted file mode 100644 index a2edec371d..0000000000 --- a/target/linux/at91/patches-5.15/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch +++ /dev/null @@ -1,467 +0,0 @@ -From 892f6d2fb9c42d4ac451236639599f533c37b507 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:53 +0300 -Subject: [PATCH 203/247] ARM: at91: pm: avoid push and pop on stack while - memory is in self-refersh - -For the previous AT91 RAM controller and self-refresh procedure this -had no side effects. However, for SAMA7G5 the self-refresh procedure -doesn't allow this anymore as the RAM controller ports are closed -before switching it to self-refresh. This commits prepares the code -for the following ones adding self-refresh and PM support for SAMA7G5. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-8-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 397 +++++++++++++++++--------------- - 1 file changed, 205 insertions(+), 192 deletions(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -75,98 +75,147 @@ tmp3 .req r6 - - .arm - --/* -- * void at91_suspend_sram_fn(struct at91_pm_data*) -- * @input param: -- * @r0: base address of struct at91_pm_data -+/** -+ * Enable self-refresh -+ * -+ * register usage: -+ * @r1: memory type -+ * @r2: base address of the sram controller -+ * @r3: temporary - */ --/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */ -- .align 3 --ENTRY(at91_pm_suspend_in_sram) -- /* Save registers on stack */ -- stmfd sp!, {r4 - r12, lr} -+.macro at91_sramc_self_refresh_ena -+ ldr r1, .memtype -+ ldr r2, .sramc_base - -- /* Drain write buffer */ -- mov tmp1, #0 -- mcr p15, 0, tmp1, c7, c10, 4 -+ cmp r1, #AT91_MEMCTRL_MC -+ bne sr_ena_ddrc_sf - -- ldr tmp1, [r0, #PM_DATA_PMC] -- str tmp1, .pmc_base -- ldr tmp1, [r0, #PM_DATA_RAMC0] -- str tmp1, .sramc_base -- ldr tmp1, [r0, #PM_DATA_RAMC1] -- str tmp1, .sramc1_base -- ldr tmp1, [r0, #PM_DATA_MEMCTRL] -- str tmp1, .memtype -- ldr tmp1, [r0, #PM_DATA_MODE] -- str tmp1, .pm_mode -- ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] -- str tmp1, .mckr_offset -- ldr tmp1, [r0, #PM_DATA_PMC_VERSION] -- str tmp1, .pmc_version -- /* Both ldrne below are here to preload their address in the TLB */ -- ldr tmp1, [r0, #PM_DATA_SHDWC] -- str tmp1, .shdwc -- cmp tmp1, #0 -- ldrne tmp2, [tmp1, #0] -- ldr tmp1, [r0, #PM_DATA_SFRBU] -- str tmp1, .sfrbu -- cmp tmp1, #0 -- ldrne tmp2, [tmp1, #0x10] -+ /* Active SDRAM self-refresh mode */ -+ mov r3, #1 -+ str r3, [r2, #AT91_MC_SDRAMC_SRR] -+ b sr_ena_exit - -- /* Active the self-refresh mode */ -- mov r0, #SRAMC_SELF_FRESH_ACTIVE -- bl at91_sramc_self_refresh -+sr_ena_ddrc_sf: -+ cmp r1, #AT91_MEMCTRL_DDRSDR -+ bne sr_ena_sdramc_sf - -- ldr r0, .pm_mode -- cmp r0, #AT91_PM_STANDBY -- beq standby -- cmp r0, #AT91_PM_BACKUP -- beq backup_mode -+ /* -+ * DDR Memory controller -+ */ - -- bl at91_ulp_mode -- b exit_suspend -+ /* LPDDR1 --> force DDR2 mode during self-refresh */ -+ ldr r3, [r2, #AT91_DDRSDRC_MDR] -+ str r3, .saved_sam9_mdr -+ bic r3, r3, #~AT91_DDRSDRC_MD -+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR -+ ldreq r3, [r2, #AT91_DDRSDRC_MDR] -+ biceq r3, r3, #AT91_DDRSDRC_MD -+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 -+ streq r3, [r2, #AT91_DDRSDRC_MDR] - --standby: -- /* Wait for interrupt */ -- ldr pmc, .pmc_base -- at91_cpu_idle -- b exit_suspend -+ /* Active DDRC self-refresh mode */ -+ ldr r3, [r2, #AT91_DDRSDRC_LPR] -+ str r3, .saved_sam9_lpr -+ bic r3, r3, #AT91_DDRSDRC_LPCB -+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH -+ str r3, [r2, #AT91_DDRSDRC_LPR] - --backup_mode: -- bl at91_backup_mode -- b exit_suspend -+ /* If using the 2nd ddr controller */ -+ ldr r2, .sramc1_base -+ cmp r2, #0 -+ beq sr_ena_no_2nd_ddrc - --exit_suspend: -- /* Exit the self-refresh mode */ -- mov r0, #SRAMC_SELF_FRESH_EXIT -- bl at91_sramc_self_refresh -+ ldr r3, [r2, #AT91_DDRSDRC_MDR] -+ str r3, .saved_sam9_mdr1 -+ bic r3, r3, #~AT91_DDRSDRC_MD -+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR -+ ldreq r3, [r2, #AT91_DDRSDRC_MDR] -+ biceq r3, r3, #AT91_DDRSDRC_MD -+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 -+ streq r3, [r2, #AT91_DDRSDRC_MDR] - -- /* Restore registers, and return */ -- ldmfd sp!, {r4 - r12, pc} --ENDPROC(at91_pm_suspend_in_sram) -+ /* Active DDRC self-refresh mode */ -+ ldr r3, [r2, #AT91_DDRSDRC_LPR] -+ str r3, .saved_sam9_lpr1 -+ bic r3, r3, #AT91_DDRSDRC_LPCB -+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH -+ str r3, [r2, #AT91_DDRSDRC_LPR] - --ENTRY(at91_backup_mode) -- /* Switch the master clock source to slow clock. */ -- ldr pmc, .pmc_base -- ldr tmp2, .mckr_offset -- ldr tmp1, [pmc, tmp2] -- bic tmp1, tmp1, #AT91_PMC_CSS -- str tmp1, [pmc, tmp2] -+sr_ena_no_2nd_ddrc: -+ b sr_ena_exit - -- wait_mckrdy -+ /* -+ * SDRAMC Memory controller -+ */ -+sr_ena_sdramc_sf: -+ /* Active SDRAMC self-refresh mode */ -+ ldr r3, [r2, #AT91_SDRAMC_LPR] -+ str r3, .saved_sam9_lpr -+ bic r3, r3, #AT91_SDRAMC_LPCB -+ orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH -+ str r3, [r2, #AT91_SDRAMC_LPR] - -- /*BUMEN*/ -- ldr r0, .sfrbu -- mov tmp1, #0x1 -- str tmp1, [r0, #0x10] -+ ldr r3, .saved_sam9_lpr -+ str r3, [r2, #AT91_SDRAMC_LPR] - -- /* Shutdown */ -- ldr r0, .shdwc -- mov tmp1, #0xA5000000 -- add tmp1, tmp1, #0x1 -- str tmp1, [r0, #0] --ENDPROC(at91_backup_mode) -+sr_ena_exit: -+.endm -+ -+/** -+ * Disable self-refresh -+ * -+ * register usage: -+ * @r1: memory type -+ * @r2: base address of the sram controller -+ * @r3: temporary -+ */ -+.macro at91_sramc_self_refresh_dis -+ ldr r1, .memtype -+ ldr r2, .sramc_base -+ -+ cmp r1, #AT91_MEMCTRL_MC -+ bne sr_dis_ddrc_exit_sf -+ -+ /* -+ * at91rm9200 Memory controller -+ */ -+ -+ /* -+ * For exiting the self-refresh mode, do nothing, -+ * automatically exit the self-refresh mode. -+ */ -+ b sr_dis_exit -+ -+sr_dis_ddrc_exit_sf: -+ cmp r1, #AT91_MEMCTRL_DDRSDR -+ bne sdramc_exit_sf -+ -+ /* DDR Memory controller */ -+ -+ /* Restore MDR in case of LPDDR1 */ -+ ldr r3, .saved_sam9_mdr -+ str r3, [r2, #AT91_DDRSDRC_MDR] -+ /* Restore LPR on AT91 with DDRAM */ -+ ldr r3, .saved_sam9_lpr -+ str r3, [r2, #AT91_DDRSDRC_LPR] -+ -+ /* If using the 2nd ddr controller */ -+ ldr r2, .sramc1_base -+ cmp r2, #0 -+ ldrne r3, .saved_sam9_mdr1 -+ strne r3, [r2, #AT91_DDRSDRC_MDR] -+ ldrne r3, .saved_sam9_lpr1 -+ strne r3, [r2, #AT91_DDRSDRC_LPR] -+ -+ b sr_dis_exit -+ -+sdramc_exit_sf: -+ /* SDRAMC Memory controller */ -+ ldr r3, .saved_sam9_lpr -+ str r3, [r2, #AT91_SDRAMC_LPR] -+ -+sr_dis_exit: -+.endm - - .macro at91_pm_ulp0_mode - ldr pmc, .pmc_base -@@ -503,7 +552,7 @@ ENDPROC(at91_backup_mode) - 2: - .endm - --ENTRY(at91_ulp_mode) -+.macro at91_ulp_mode - ldr pmc, .pmc_base - ldr tmp2, .mckr_offset - ldr tmp3, .pm_mode -@@ -552,133 +601,97 @@ ulp_exit: - - wait_mckrdy - -- mov pc, lr --ENDPROC(at91_ulp_mode) -- --/* -- * void at91_sramc_self_refresh(unsigned int is_active) -- * -- * @input param: -- * @r0: 1 - active self-refresh mode -- * 0 - exit self-refresh mode -- * register usage: -- * @r1: memory type -- * @r2: base address of the sram controller -- */ -- --ENTRY(at91_sramc_self_refresh) -- ldr r1, .memtype -- ldr r2, .sramc_base -- -- cmp r1, #AT91_MEMCTRL_MC -- bne ddrc_sf -- -- /* -- * at91rm9200 Memory controller -- */ -- -- /* -- * For exiting the self-refresh mode, do nothing, -- * automatically exit the self-refresh mode. -- */ -- tst r0, #SRAMC_SELF_FRESH_ACTIVE -- beq exit_sramc_sf -- -- /* Active SDRAM self-refresh mode */ -- mov r3, #1 -- str r3, [r2, #AT91_MC_SDRAMC_SRR] -- b exit_sramc_sf -- --ddrc_sf: -- cmp r1, #AT91_MEMCTRL_DDRSDR -- bne sdramc_sf -+.endm - -- /* -- * DDR Memory controller -- */ -- tst r0, #SRAMC_SELF_FRESH_ACTIVE -- beq ddrc_exit_sf -+.macro at91_backup_mode -+ /* Switch the master clock source to slow clock. */ -+ ldr pmc, .pmc_base -+ ldr tmp2, .mckr_offset -+ ldr tmp1, [pmc, tmp2] -+ bic tmp1, tmp1, #AT91_PMC_CSS -+ str tmp1, [pmc, tmp2] - -- /* LPDDR1 --> force DDR2 mode during self-refresh */ -- ldr r3, [r2, #AT91_DDRSDRC_MDR] -- str r3, .saved_sam9_mdr -- bic r3, r3, #~AT91_DDRSDRC_MD -- cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR -- ldreq r3, [r2, #AT91_DDRSDRC_MDR] -- biceq r3, r3, #AT91_DDRSDRC_MD -- orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 -- streq r3, [r2, #AT91_DDRSDRC_MDR] -+ wait_mckrdy - -- /* Active DDRC self-refresh mode */ -- ldr r3, [r2, #AT91_DDRSDRC_LPR] -- str r3, .saved_sam9_lpr -- bic r3, r3, #AT91_DDRSDRC_LPCB -- orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH -- str r3, [r2, #AT91_DDRSDRC_LPR] -+ /*BUMEN*/ -+ ldr r0, .sfrbu -+ mov tmp1, #0x1 -+ str tmp1, [r0, #0x10] - -- /* If using the 2nd ddr controller */ -- ldr r2, .sramc1_base -- cmp r2, #0 -- beq no_2nd_ddrc -+ /* Shutdown */ -+ ldr r0, .shdwc -+ mov tmp1, #0xA5000000 -+ add tmp1, tmp1, #0x1 -+ str tmp1, [r0, #0] -+.endm - -- ldr r3, [r2, #AT91_DDRSDRC_MDR] -- str r3, .saved_sam9_mdr1 -- bic r3, r3, #~AT91_DDRSDRC_MD -- cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR -- ldreq r3, [r2, #AT91_DDRSDRC_MDR] -- biceq r3, r3, #AT91_DDRSDRC_MD -- orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 -- streq r3, [r2, #AT91_DDRSDRC_MDR] -+/* -+ * void at91_suspend_sram_fn(struct at91_pm_data*) -+ * @input param: -+ * @r0: base address of struct at91_pm_data -+ */ -+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */ -+ .align 3 -+ENTRY(at91_pm_suspend_in_sram) -+ /* Save registers on stack */ -+ stmfd sp!, {r4 - r12, lr} - -- /* Active DDRC self-refresh mode */ -- ldr r3, [r2, #AT91_DDRSDRC_LPR] -- str r3, .saved_sam9_lpr1 -- bic r3, r3, #AT91_DDRSDRC_LPCB -- orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH -- str r3, [r2, #AT91_DDRSDRC_LPR] -+ /* Drain write buffer */ -+ mov tmp1, #0 -+ mcr p15, 0, tmp1, c7, c10, 4 - --no_2nd_ddrc: -- b exit_sramc_sf -+ ldr tmp1, [r0, #PM_DATA_PMC] -+ str tmp1, .pmc_base -+ ldr tmp1, [r0, #PM_DATA_RAMC0] -+ str tmp1, .sramc_base -+ ldr tmp1, [r0, #PM_DATA_RAMC1] -+ str tmp1, .sramc1_base -+ ldr tmp1, [r0, #PM_DATA_MEMCTRL] -+ str tmp1, .memtype -+ ldr tmp1, [r0, #PM_DATA_MODE] -+ str tmp1, .pm_mode -+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] -+ str tmp1, .mckr_offset -+ ldr tmp1, [r0, #PM_DATA_PMC_VERSION] -+ str tmp1, .pmc_version -+ /* Both ldrne below are here to preload their address in the TLB */ -+ ldr tmp1, [r0, #PM_DATA_SHDWC] -+ str tmp1, .shdwc -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0] -+ ldr tmp1, [r0, #PM_DATA_SFRBU] -+ str tmp1, .sfrbu -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0x10] - --ddrc_exit_sf: -- /* Restore MDR in case of LPDDR1 */ -- ldr r3, .saved_sam9_mdr -- str r3, [r2, #AT91_DDRSDRC_MDR] -- /* Restore LPR on AT91 with DDRAM */ -- ldr r3, .saved_sam9_lpr -- str r3, [r2, #AT91_DDRSDRC_LPR] -+ /* Active the self-refresh mode */ -+ at91_sramc_self_refresh_ena - -- /* If using the 2nd ddr controller */ -- ldr r2, .sramc1_base -- cmp r2, #0 -- ldrne r3, .saved_sam9_mdr1 -- strne r3, [r2, #AT91_DDRSDRC_MDR] -- ldrne r3, .saved_sam9_lpr1 -- strne r3, [r2, #AT91_DDRSDRC_LPR] -+ ldr r0, .pm_mode -+ cmp r0, #AT91_PM_STANDBY -+ beq standby -+ cmp r0, #AT91_PM_BACKUP -+ beq backup_mode - -- b exit_sramc_sf -+ at91_ulp_mode -+ b exit_suspend - -- /* -- * SDRAMC Memory controller -- */ --sdramc_sf: -- tst r0, #SRAMC_SELF_FRESH_ACTIVE -- beq sdramc_exit_sf -+standby: -+ /* Wait for interrupt */ -+ ldr pmc, .pmc_base -+ at91_cpu_idle -+ b exit_suspend - -- /* Active SDRAMC self-refresh mode */ -- ldr r3, [r2, #AT91_SDRAMC_LPR] -- str r3, .saved_sam9_lpr -- bic r3, r3, #AT91_SDRAMC_LPCB -- orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH -- str r3, [r2, #AT91_SDRAMC_LPR] -+backup_mode: -+ at91_backup_mode - --sdramc_exit_sf: -- ldr r3, .saved_sam9_lpr -- str r3, [r2, #AT91_SDRAMC_LPR] -+exit_suspend: -+ /* Exit the self-refresh mode */ -+ at91_sramc_self_refresh_dis - --exit_sramc_sf: -- mov pc, lr --ENDPROC(at91_sramc_self_refresh) -+ /* Restore registers, and return */ -+ ldmfd sp!, {r4 - r12, pc} -+ENDPROC(at91_pm_suspend_in_sram) - - .pmc_base: - .word 0 diff --git a/target/linux/at91/patches-5.15/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch b/target/linux/at91/patches-5.15/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch deleted file mode 100644 index 4601d922d6..0000000000 --- a/target/linux/at91/patches-5.15/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 673d2519e9028dafb678fac29a990740958bed3c Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:54 +0300 -Subject: [PATCH 204/247] ARM: at91: pm: - s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g - -Replace CONFIG_SOC_SAM9X60 with CONFIG_HAVE_AT91_SAM9X60_PLL as the -SAM9X60's PLL is also present on SAMA7G5. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-9-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -422,7 +422,7 @@ sr_dis_exit: - cmp tmp1, #AT91_PMC_V1 - beq 1f - --#ifdef CONFIG_SOC_SAM9X60 -+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL - /* Save PLLA settings. */ - ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT] - bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID -@@ -489,7 +489,7 @@ sr_dis_exit: - cmp tmp3, #AT91_PMC_V1 - beq 4f - --#ifdef CONFIG_SOC_SAM9X60 -+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL - /* step 1. */ - ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] - bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID diff --git a/target/linux/at91/patches-5.15/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch b/target/linux/at91/patches-5.15/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch deleted file mode 100644 index 16e733727f..0000000000 --- a/target/linux/at91/patches-5.15/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch +++ /dev/null @@ -1,150 +0,0 @@ -From 67face049c62cb37cf93da26b7fea037228d1d3d Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:55 +0300 -Subject: [PATCH 205/247] ARM: at91: pm: add support for waiting MCK1..4 - -SAMA7G5 has 5 master clocks 0..4. MCK0 is controlled differently than -MCK 1..4. MCK 1..4 should also be saved/restored in the last phase of -suspend/resume. Thus, adapt wait_mckrdy to support also MCK1..4. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-10-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 48 ++++++++++++++++++++++++--------- - 1 file changed, 35 insertions(+), 13 deletions(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -22,11 +22,23 @@ tmp3 .req r6 - - /* - * Wait until master clock is ready (after switching master clock source) -+ * -+ * @r_mckid: register holding master clock identifier -+ * -+ * Side effects: overwrites r7, r8 - */ -- .macro wait_mckrdy --1: ldr tmp1, [pmc, #AT91_PMC_SR] -- tst tmp1, #AT91_PMC_MCKRDY -- beq 1b -+ .macro wait_mckrdy r_mckid -+#ifdef CONFIG_SOC_SAMA7 -+ cmp \r_mckid, #0 -+ beq 1f -+ mov r7, #AT91_PMC_MCKXRDY -+ b 2f -+#endif -+1: mov r7, #AT91_PMC_MCKRDY -+2: ldr r8, [pmc, #AT91_PMC_SR] -+ and r8, r7 -+ cmp r8, r7 -+ bne 2b - .endm - - /* -@@ -231,7 +243,9 @@ sr_dis_exit: - bic tmp1, tmp1, #AT91_PMC_PRES - orr tmp1, tmp1, #AT91_PMC_PRES_64 - str tmp1, [pmc, tmp3] -- wait_mckrdy -+ -+ mov tmp3, #0 -+ wait_mckrdy tmp3 - b 1f - - 0: -@@ -267,10 +281,13 @@ sr_dis_exit: - bne 5f - - /* Set lowest prescaler for fast resume. */ -+ ldr tmp3, .mckr_offset - ldr tmp1, [pmc, tmp3] - bic tmp1, tmp1, #AT91_PMC_PRES - str tmp1, [pmc, tmp3] -- wait_mckrdy -+ -+ mov tmp3, #0 -+ wait_mckrdy tmp3 - b 6f - - 5: /* Restore RC oscillator state */ -@@ -307,6 +324,7 @@ sr_dis_exit: - .macro at91_pm_ulp1_mode - ldr pmc, .pmc_base - ldr tmp2, .mckr_offset -+ mov tmp3, #0 - - /* Save RC oscillator state and check if it is enabled. */ - ldr tmp1, [pmc, #AT91_PMC_SR] -@@ -348,7 +366,7 @@ sr_dis_exit: - orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, tmp2] - -- wait_mckrdy -+ wait_mckrdy tmp3 - - /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] -@@ -361,7 +379,7 @@ sr_dis_exit: - nop - nop - -- wait_mckrdy -+ wait_mckrdy tmp3 - - /* Enable the crystal oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] -@@ -377,7 +395,7 @@ sr_dis_exit: - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, tmp2] - -- wait_mckrdy -+ wait_mckrdy tmp3 - - /* Switch main clock source to crystal oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] -@@ -394,7 +412,7 @@ sr_dis_exit: - orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, tmp2] - -- wait_mckrdy -+ wait_mckrdy tmp3 - - /* Restore RC oscillator state */ - ldr tmp1, .saved_osc_status -@@ -573,10 +591,12 @@ sr_dis_exit: - save_mck: - str tmp1, [pmc, tmp2] - -- wait_mckrdy -+ mov tmp3, #0 -+ wait_mckrdy tmp3 - - at91_plla_disable - -+ ldr tmp3, .pm_mode - cmp tmp3, #AT91_PM_ULP1 - beq ulp1_mode - -@@ -599,7 +619,8 @@ ulp_exit: - ldr tmp2, .saved_mckr - str tmp2, [pmc, tmp1] - -- wait_mckrdy -+ mov tmp3, #0 -+ wait_mckrdy tmp3 - - .endm - -@@ -611,7 +632,8 @@ ulp_exit: - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, tmp2] - -- wait_mckrdy -+ mov tmp3, #0 -+ wait_mckrdy tmp3 - - /*BUMEN*/ - ldr r0, .sfrbu diff --git a/target/linux/at91/patches-5.15/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch b/target/linux/at91/patches-5.15/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch deleted file mode 100644 index 37a22885d7..0000000000 --- a/target/linux/at91/patches-5.15/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch +++ /dev/null @@ -1,53 +0,0 @@ -From c6b435625975d9a6daeffd81509a9877ddfb93b5 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:56 +0300 -Subject: [PATCH 206/247] ARM: at91: sfrbu: add sfrbu registers definitions for - sama7g5 - -Add SFRBU registers definitions for SAMA7G5. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-11-claudiu.beznea@microchip.com ---- - include/soc/at91/sama7-sfrbu.h | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - create mode 100644 include/soc/at91/sama7-sfrbu.h - ---- /dev/null -+++ b/include/soc/at91/sama7-sfrbu.h -@@ -0,0 +1,34 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* -+ * Microchip SAMA7 SFRBU registers offsets and bit definitions. -+ * -+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries -+ * -+ * Author: Claudu Beznea -+ */ -+ -+#ifndef __SAMA7_SFRBU_H__ -+#define __SAMA7_SFRBU_H__ -+ -+#ifdef CONFIG_SOC_SAMA7 -+ -+#define AT91_SFRBU_PSWBU (0x00) /* SFRBU Power Switch BU Control Register */ -+#define AT91_SFRBU_PSWBU_PSWKEY (0x4BD20C << 8) /* Specific value mandatory to allow writing of other register bits */ -+#define AT91_SFRBU_PSWBU_STATE (1 << 2) /* Power switch BU state */ -+#define AT91_SFRBU_PSWBU_SOFTSWITCH (1 << 1) /* Power switch BU source selection */ -+#define AT91_SFRBU_PSWBU_CTRL (1 << 0) /* Power switch BU control */ -+ -+#define AT91_SFRBU_25LDOCR (0x0C) /* SFRBU 2.5V LDO Control Register */ -+#define AT91_SFRBU_25LDOCR_LDOANAKEY (0x3B6E18 << 8) /* Specific value mandatory to allow writing of other register bits. */ -+#define AT91_SFRBU_25LDOCR_STATE (1 << 3) /* LDOANA Switch On/Off Control */ -+#define AT91_SFRBU_25LDOCR_LP (1 << 2) /* LDOANA Low-Power Mode Control */ -+#define AT91_SFRBU_PD_VALUE_MSK (0x3) -+#define AT91_SFRBU_25LDOCR_PD_VALUE(v) ((v) & AT91_SFRBU_PD_VALUE_MSK) /* LDOANA Pull-down value */ -+ -+#define AT91_FRBU_DDRPWR (0x10) /* SFRBU DDR Power Control Register */ -+#define AT91_FRBU_DDRPWR_STATE (1 << 0) /* DDR Power Mode State */ -+ -+#endif /* CONFIG_SOC_SAMA7 */ -+ -+#endif /* __SAMA7_SFRBU_H__ */ -+ diff --git a/target/linux/at91/patches-5.15/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch b/target/linux/at91/patches-5.15/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch deleted file mode 100644 index 1df310f216..0000000000 --- a/target/linux/at91/patches-5.15/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 0005be9abfcddf9a29c6d07afe06caa41560d424 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:57 +0300 -Subject: [PATCH 207/247] ARM: at91: ddr: add registers definitions for - sama7g5's ddr - -Add registers and bits definitions for SAMA7G5's UDDRC and DDR3PHY. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-12-claudiu.beznea@microchip.com ---- - include/soc/at91/sama7-ddr.h | 80 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 80 insertions(+) - create mode 100644 include/soc/at91/sama7-ddr.h - ---- /dev/null -+++ b/include/soc/at91/sama7-ddr.h -@@ -0,0 +1,80 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+/* -+ * Microchip SAMA7 UDDR Controller and DDR3 PHY Controller registers offsets -+ * and bit definitions. -+ * -+ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries -+ * -+ * Author: Claudu Beznea -+ */ -+ -+#ifndef __SAMA7_DDR_H__ -+#define __SAMA7_DDR_H__ -+ -+#ifdef CONFIG_SOC_SAMA7 -+ -+/* DDR3PHY */ -+#define DDR3PHY_PIR (0x04) /* DDR3PHY PHY Initialization Register */ -+#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */ -+#define DDR3PHY_PIR_ITMSRST (1 << 4) /* Interface Timing Module Soft Reset */ -+#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */ -+#define DDR3PHY_PIR_DLLSRST (1 << 1) /* DLL Soft Rest */ -+#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */ -+ -+#define DDR3PHY_PGCR (0x08) /* DDR3PHY PHY General Configuration Register */ -+#define DDR3PHY_PGCR_CKDV1 (1 << 13) /* CK# Disable Value */ -+#define DDR3PHY_PGCR_CKDV0 (1 << 12) /* CK Disable Value */ -+ -+#define DDR3PHY_PGSR (0x0C) /* DDR3PHY PHY General Status Register */ -+#define DDR3PHY_PGSR_IDONE (1 << 0) /* Initialization Done */ -+ -+#define DDR3PHY_ACIOCR (0x24) /* DDR3PHY AC I/O Configuration Register */ -+#define DDR3PHY_ACIOCR_CSPDD_CS0 (1 << 18) /* CS#[0] Power Down Driver */ -+#define DDR3PHY_ACIOCR_CKPDD_CK0 (1 << 8) /* CK[0] Power Down Driver */ -+#define DDR3PHY_ACIORC_ACPDD (1 << 3) /* AC Power Down Driver */ -+ -+#define DDR3PHY_DXCCR (0x28) /* DDR3PHY DATX8 Common Configuration Register */ -+#define DDR3PHY_DXCCR_DXPDR (1 << 3) /* Data Power Down Receiver */ -+ -+#define DDR3PHY_DSGCR (0x2C) /* DDR3PHY DDR System General Configuration Register */ -+#define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */ -+ -+#define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */ -+ -+/* UDDRC */ -+#define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */ -+#define UDDRC_STAT_SELFREF_TYPE_DIS (0x0 << 4) /* SDRAM is not in Self-refresh */ -+#define UDDRC_STAT_SELFREF_TYPE_PHY (0x1 << 4) /* SDRAM is in Self-refresh, which was caused by PHY Master Request */ -+#define UDDRC_STAT_SELFREF_TYPE_SW (0x2 << 4) /* SDRAM is in Self-refresh, which was not caused solely under Automatic Self-refresh control */ -+#define UDDRC_STAT_SELFREF_TYPE_AUTO (0x3 << 4) /* SDRAM is in Self-refresh, which was caused by Automatic Self-refresh only */ -+#define UDDRC_STAT_SELFREF_TYPE_MSK (0x3 << 4) /* Self-refresh type mask */ -+#define UDDRC_STAT_OPMODE_INIT (0x0 << 0) /* Init */ -+#define UDDRC_STAT_OPMODE_NORMAL (0x1 << 0) /* Normal */ -+#define UDDRC_STAT_OPMODE_PWRDOWN (0x2 << 0) /* Power-down */ -+#define UDDRC_STAT_OPMODE_SELF_REFRESH (0x3 << 0) /* Self-refresh */ -+#define UDDRC_STAT_OPMODE_MSK (0x7 << 0) /* Operating mode mask */ -+ -+#define UDDRC_PWRCTL (0x30) /* UDDRC Low Power Control Register */ -+#define UDDRC_PWRCTRL_SELFREF_SW (1 << 5) /* Software self-refresh */ -+ -+#define UDDRC_DFIMISC (0x1B0) /* UDDRC DFI Miscellaneous Control Register */ -+#define UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0) /* PHY initialization complete enable signal */ -+ -+#define UDDRC_SWCTRL (0x320) /* UDDRC Software Register Programming Control Enable */ -+#define UDDRC_SWCTRL_SW_DONE (1 << 0) /* Enable quasi-dynamic register programming outside reset */ -+ -+#define UDDRC_SWSTAT (0x324) /* UDDRC Software Register Programming Control Status */ -+#define UDDRC_SWSTAT_SW_DONE_ACK (1 << 0) /* Register programming done */ -+ -+#define UDDRC_PSTAT (0x3FC) /* UDDRC Port Status Register */ -+#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */ -+ -+#define UDDRC_PCTRL_0 (0x490) /* UDDRC Port 0 Control Register */ -+#define UDDRC_PCTRL_1 (0x540) /* UDDRC Port 1 Control Register */ -+#define UDDRC_PCTRL_2 (0x5F0) /* UDDRC Port 2 Control Register */ -+#define UDDRC_PCTRL_3 (0x6A0) /* UDDRC Port 3 Control Register */ -+#define UDDRC_PCTRL_4 (0x750) /* UDDRC Port 4 Control Register */ -+ -+#endif /* CONFIG_SOC_SAMA7 */ -+ -+#endif /* __SAMA7_DDR_H__ */ diff --git a/target/linux/at91/patches-5.15/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch b/target/linux/at91/patches-5.15/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch deleted file mode 100644 index f8321e5042..0000000000 --- a/target/linux/at91/patches-5.15/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch +++ /dev/null @@ -1,274 +0,0 @@ -From 1bfd85d71703f80392a71043caf74f159bec97b8 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:58 +0300 -Subject: [PATCH 208/247] ARM: at91: pm: add self-refresh support for sama7g5 - -Add self-refresh support for SAMA7G5. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-13-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.h | 2 + - arch/arm/mach-at91/pm_data-offsets.c | 2 + - arch/arm/mach-at91/pm_suspend.S | 199 +++++++++++++++++++++++++++ - 3 files changed, 203 insertions(+) - ---- a/arch/arm/mach-at91/pm.h -+++ b/arch/arm/mach-at91/pm.h -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - - #define AT91_MEMCTRL_MC 0 - #define AT91_MEMCTRL_SDRAMC 1 -@@ -27,6 +28,7 @@ - struct at91_pm_data { - void __iomem *pmc; - void __iomem *ramc[2]; -+ void __iomem *ramc_phy; - unsigned long uhp_udp_mask; - unsigned int memctrl; - unsigned int mode; ---- a/arch/arm/mach-at91/pm_data-offsets.c -+++ b/arch/arm/mach-at91/pm_data-offsets.c -@@ -8,6 +8,8 @@ int main(void) - DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc)); - DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0])); - DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1])); -+ DEFINE(PM_DATA_RAMC_PHY, offsetof(struct at91_pm_data, -+ ramc_phy)); - DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl)); - DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode)); - DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc)); ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -87,6 +87,200 @@ tmp3 .req r6 - - .arm - -+#ifdef CONFIG_SOC_SAMA7 -+/** -+ * Enable self-refresh -+ * -+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7 -+ */ -+.macro at91_sramc_self_refresh_ena -+ ldr r2, .sramc_base -+ ldr r3, .sramc_phy_base -+ ldr r7, .pm_mode -+ -+ dsb -+ -+ /* Disable all AXI ports. */ -+ ldr tmp1, [r2, #UDDRC_PCTRL_0] -+ bic tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_0] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_1] -+ bic tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_1] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_2] -+ bic tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_2] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_3] -+ bic tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_3] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_4] -+ bic tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_4] -+ -+sr_ena_1: -+ /* Wait for all ports to disable. */ -+ ldr tmp1, [r2, #UDDRC_PSTAT] -+ ldr tmp2, =UDDRC_PSTAT_ALL_PORTS -+ tst tmp1, tmp2 -+ bne sr_ena_1 -+ -+ /* Switch to self-refresh. */ -+ ldr tmp1, [r2, #UDDRC_PWRCTL] -+ orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW -+ str tmp1, [r2, #UDDRC_PWRCTL] -+ -+sr_ena_2: -+ /* Wait for self-refresh enter. */ -+ ldr tmp1, [r2, #UDDRC_STAT] -+ bic tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK -+ cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW -+ bne sr_ena_2 -+ -+ /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ -+ cmp r7, #AT91_PM_BACKUP -+ beq sr_ena_3 -+ ldr tmp1, [r3, #DDR3PHY_PIR] -+ orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP -+ str tmp1, [r3, #DDR3PHY_PIR] -+ -+sr_ena_3: -+ /* Power down DDR PHY data receivers. */ -+ ldr tmp1, [r3, #DDR3PHY_DXCCR] -+ orr tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR -+ str tmp1, [r3, #DDR3PHY_DXCCR] -+ -+ /* Power down ADDR/CMD IO. */ -+ ldr tmp1, [r3, #DDR3PHY_ACIOCR] -+ orr tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD -+ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0 -+ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0 -+ str tmp1, [r3, #DDR3PHY_ACIOCR] -+ -+ /* Power down ODT. */ -+ ldr tmp1, [r3, #DDR3PHY_DSGCR] -+ orr tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 -+ str tmp1, [r3, #DDR3PHY_DSGCR] -+.endm -+ -+/** -+ * Disable self-refresh -+ * -+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3 -+ */ -+.macro at91_sramc_self_refresh_dis -+ ldr r2, .sramc_base -+ ldr r3, .sramc_phy_base -+ -+ /* Power up DDR PHY data receivers. */ -+ ldr tmp1, [r3, #DDR3PHY_DXCCR] -+ bic tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR -+ str tmp1, [r3, #DDR3PHY_DXCCR] -+ -+ /* Power up the output of CK and CS pins. */ -+ ldr tmp1, [r3, #DDR3PHY_ACIOCR] -+ bic tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD -+ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0 -+ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0 -+ str tmp1, [r3, #DDR3PHY_ACIOCR] -+ -+ /* Power up ODT. */ -+ ldr tmp1, [r3, #DDR3PHY_DSGCR] -+ bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 -+ str tmp1, [r3, #DDR3PHY_DSGCR] -+ -+ /* Take DDR PHY's DLL out of bypass mode. */ -+ ldr tmp1, [r3, #DDR3PHY_PIR] -+ bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP -+ str tmp1, [r3, #DDR3PHY_PIR] -+ -+ /* Enable quasi-dynamic programming. */ -+ mov tmp1, #0 -+ str tmp1, [r2, #UDDRC_SWCTRL] -+ -+ /* De-assert SDRAM initialization. */ -+ ldr tmp1, [r2, #UDDRC_DFIMISC] -+ bic tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN -+ str tmp1, [r2, #UDDRC_DFIMISC] -+ -+ /* Quasi-dynamic programming done. */ -+ mov tmp1, #UDDRC_SWCTRL_SW_DONE -+ str tmp1, [r2, #UDDRC_SWCTRL] -+ -+sr_dis_1: -+ ldr tmp1, [r2, #UDDRC_SWSTAT] -+ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK -+ beq sr_dis_1 -+ -+ /* DLL soft-reset + DLL lock wait + ITM reset */ -+ mov tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \ -+ DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST) -+ str tmp1, [r3, #DDR3PHY_PIR] -+ -+sr_dis_4: -+ /* Wait for it. */ -+ ldr tmp1, [r3, #DDR3PHY_PGSR] -+ tst tmp1, #DDR3PHY_PGSR_IDONE -+ beq sr_dis_4 -+ -+ /* Enable quasi-dynamic programming. */ -+ mov tmp1, #0 -+ str tmp1, [r2, #UDDRC_SWCTRL] -+ -+ /* Assert PHY init complete enable signal. */ -+ ldr tmp1, [r2, #UDDRC_DFIMISC] -+ orr tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN -+ str tmp1, [r2, #UDDRC_DFIMISC] -+ -+ /* Programming is done. Set sw_done. */ -+ mov tmp1, #UDDRC_SWCTRL_SW_DONE -+ str tmp1, [r2, #UDDRC_SWCTRL] -+ -+sr_dis_5: -+ /* Wait for it. */ -+ ldr tmp1, [r2, #UDDRC_SWSTAT] -+ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK -+ beq sr_dis_5 -+ -+ /* Trigger self-refresh exit. */ -+ ldr tmp1, [r2, #UDDRC_PWRCTL] -+ bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW -+ str tmp1, [r2, #UDDRC_PWRCTL] -+ -+sr_dis_6: -+ /* Wait for self-refresh exit done. */ -+ ldr tmp1, [r2, #UDDRC_STAT] -+ bic tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK -+ cmp tmp1, #UDDRC_STAT_OPMODE_NORMAL -+ bne sr_dis_6 -+ -+ /* Enable all AXI ports. */ -+ ldr tmp1, [r2, #UDDRC_PCTRL_0] -+ orr tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_0] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_1] -+ orr tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_1] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_2] -+ orr tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_2] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_3] -+ orr tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_3] -+ -+ ldr tmp1, [r2, #UDDRC_PCTRL_4] -+ orr tmp1, tmp1, #0x1 -+ str tmp1, [r2, #UDDRC_PCTRL_4] -+ -+ dsb -+.endm -+#else - /** - * Enable self-refresh - * -@@ -228,6 +422,7 @@ sdramc_exit_sf: - - sr_dis_exit: - .endm -+#endif - - .macro at91_pm_ulp0_mode - ldr pmc, .pmc_base -@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram) - str tmp1, .sramc_base - ldr tmp1, [r0, #PM_DATA_RAMC1] - str tmp1, .sramc1_base -+ ldr tmp1, [r0, #PM_DATA_RAMC_PHY] -+ str tmp1, .sramc_phy_base - ldr tmp1, [r0, #PM_DATA_MEMCTRL] - str tmp1, .memtype - ldr tmp1, [r0, #PM_DATA_MODE] -@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram) - .word 0 - .sramc1_base: - .word 0 -+.sramc_phy_base: -+ .word 0 - .shdwc: - .word 0 - .sfrbu: diff --git a/target/linux/at91/patches-5.15/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch b/target/linux/at91/patches-5.15/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch deleted file mode 100644 index 7c8614125c..0000000000 --- a/target/linux/at91/patches-5.15/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 9ee7fd7aa956671727752dac6bd131cf511c1137 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:49:59 +0300 -Subject: [PATCH 209/247] ARM: at91: pm: add support for MCK1..4 save/restore - for ulp modes - -Add support for MCK1..4 save restore for ULP modes. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-14-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 126 ++++++++++++++++++++++++++++++++ - 1 file changed, 126 insertions(+) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -765,7 +765,122 @@ sr_dis_exit: - 2: - .endm - -+/** -+ * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock -+ * -+ * Side effects: overwrites tmp1, tmp2 -+ */ -+.macro at91_mckx_ps_enable -+#ifdef CONFIG_SOC_SAMA7 -+ ldr pmc, .pmc_base -+ -+ /* There are 4 MCKs we need to handle: MCK1..4 */ -+ mov tmp1, #1 -+e_loop: cmp tmp1, #5 -+ beq e_done -+ -+ /* Write MCK ID to retrieve the settings. */ -+ str tmp1, [pmc, #AT91_PMC_MCR_V2] -+ ldr tmp2, [pmc, #AT91_PMC_MCR_V2] -+ -+e_save_mck1: -+ cmp tmp1, #1 -+ bne e_save_mck2 -+ str tmp2, .saved_mck1 -+ b e_ps -+ -+e_save_mck2: -+ cmp tmp1, #2 -+ bne e_save_mck3 -+ str tmp2, .saved_mck2 -+ b e_ps -+ -+e_save_mck3: -+ cmp tmp1, #3 -+ bne e_save_mck4 -+ str tmp2, .saved_mck3 -+ b e_ps -+ -+e_save_mck4: -+ str tmp2, .saved_mck4 -+ -+e_ps: -+ /* Use CSS=MAINCK and DIV=1. */ -+ bic tmp2, tmp2, #AT91_PMC_MCR_V2_CSS -+ bic tmp2, tmp2, #AT91_PMC_MCR_V2_DIV -+ orr tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK -+ orr tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1 -+ str tmp2, [pmc, #AT91_PMC_MCR_V2] -+ -+ wait_mckrdy tmp1 -+ -+ add tmp1, tmp1, #1 -+ b e_loop -+ -+e_done: -+#endif -+.endm -+ -+/** -+ * at91_mckx_ps_restore: restore MCK1..4 settings -+ * -+ * Side effects: overwrites tmp1, tmp2 -+ */ -+.macro at91_mckx_ps_restore -+#ifdef CONFIG_SOC_SAMA7 -+ ldr pmc, .pmc_base -+ -+ /* There are 4 MCKs we need to handle: MCK1..4 */ -+ mov tmp1, #1 -+r_loop: cmp tmp1, #5 -+ beq r_done -+ -+r_save_mck1: -+ cmp tmp1, #1 -+ bne r_save_mck2 -+ ldr tmp2, .saved_mck1 -+ b r_ps -+ -+r_save_mck2: -+ cmp tmp1, #2 -+ bne r_save_mck3 -+ ldr tmp2, .saved_mck2 -+ b r_ps -+ -+r_save_mck3: -+ cmp tmp1, #3 -+ bne r_save_mck4 -+ ldr tmp2, .saved_mck3 -+ b r_ps -+ -+r_save_mck4: -+ ldr tmp2, .saved_mck4 -+ -+r_ps: -+ /* Write MCK ID to retrieve the settings. */ -+ str tmp1, [pmc, #AT91_PMC_MCR_V2] -+ ldr tmp3, [pmc, #AT91_PMC_MCR_V2] -+ -+ /* We need to restore CSS and DIV. */ -+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_CSS -+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_DIV -+ orr tmp3, tmp3, tmp2 -+ bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK -+ orr tmp3, tmp3, tmp1 -+ orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD -+ str tmp2, [pmc, #AT91_PMC_MCR_V2] -+ -+ wait_mckrdy tmp1 -+ -+ add tmp1, tmp1, #1 -+ b r_loop -+r_done: -+#endif -+.endm -+ - .macro at91_ulp_mode -+ at91_mckx_ps_enable -+ - ldr pmc, .pmc_base - ldr tmp2, .mckr_offset - ldr tmp3, .pm_mode -@@ -817,6 +932,7 @@ ulp_exit: - mov tmp3, #0 - wait_mckrdy tmp3 - -+ at91_mckx_ps_restore - .endm - - .macro at91_backup_mode -@@ -946,6 +1062,16 @@ ENDPROC(at91_pm_suspend_in_sram) - .word 0 - .saved_osc_status: - .word 0 -+#ifdef CONFIG_SOC_SAMA7 -+.saved_mck1: -+ .word 0 -+.saved_mck2: -+ .word 0 -+.saved_mck3: -+ .word 0 -+.saved_mck4: -+ .word 0 -+#endif - - ENTRY(at91_pm_suspend_in_sram_sz) - .word .-at91_pm_suspend_in_sram diff --git a/target/linux/at91/patches-5.15/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch b/target/linux/at91/patches-5.15/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch deleted file mode 100644 index ede839bf70..0000000000 --- a/target/linux/at91/patches-5.15/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch +++ /dev/null @@ -1,79 +0,0 @@ -From b2073cc043612bf95b115bd94103cfb2936f05bf Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:00 +0300 -Subject: [PATCH 210/247] ARM: at91: pm: add support for 2.5V LDO regulator - control - -Add support to disable/enable 2.5V LDO regulator when entering/exiting -any ULP mode. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-15-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.h | 1 + - arch/arm/mach-at91/pm_suspend.S | 29 +++++++++++++++++++++++++++++ - 2 files changed, 30 insertions(+) - ---- a/arch/arm/mach-at91/pm.h -+++ b/arch/arm/mach-at91/pm.h -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - #define AT91_MEMCTRL_MC 0 - #define AT91_MEMCTRL_SDRAMC 1 ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -83,6 +83,29 @@ tmp3 .req r6 - - .endm - -+/** -+ * Set state for 2.5V low power regulator -+ * @ena: 0 - disable regulator -+ * 1 - enable regulator -+ * -+ * Side effects: overwrites r7, r8, r9, r10 -+ */ -+ .macro at91_2_5V_reg_set_low_power ena -+#ifdef CONFIG_SOC_SAMA7 -+ ldr r7, .sfrbu -+ mov r8, #\ena -+ ldr r9, [r7, #AT91_SFRBU_25LDOCR] -+ orr r9, r9, #AT91_SFRBU_25LDOCR_LP -+ cmp r8, #1 -+ beq lp_done_\ena -+ bic r9, r9, #AT91_SFRBU_25LDOCR_LP -+lp_done_\ena: -+ ldr r10, =AT91_SFRBU_25LDOCR_LDOANAKEY -+ orr r9, r9, r10 -+ str r9, [r7, #AT91_SFRBU_25LDOCR] -+#endif -+ .endm -+ - .text - - .arm -@@ -906,6 +929,9 @@ save_mck: - - at91_plla_disable - -+ /* Enable low power mode for 2.5V regulator. */ -+ at91_2_5V_reg_set_low_power 1 -+ - ldr tmp3, .pm_mode - cmp tmp3, #AT91_PM_ULP1 - beq ulp1_mode -@@ -918,6 +944,9 @@ ulp1_mode: - b ulp_exit - - ulp_exit: -+ /* Disable low power mode for 2.5V regulator. */ -+ at91_2_5V_reg_set_low_power 0 -+ - ldr pmc, .pmc_base - - at91_plla_enable diff --git a/target/linux/at91/patches-5.15/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch b/target/linux/at91/patches-5.15/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch deleted file mode 100644 index 886f81e7ad..0000000000 --- a/target/linux/at91/patches-5.15/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 2b522a22243938dd7613e09c954172b1fa6217f5 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:01 +0300 -Subject: [PATCH 211/247] ARM: at91: pm: wait for ddr power mode off - -Wait for DDR power mode off before shutting down the core. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-16-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -980,6 +980,11 @@ ulp_exit: - mov tmp1, #0x1 - str tmp1, [r0, #0x10] - -+ /* Wait for it. */ -+1: ldr tmp1, [r0, #0x10] -+ tst tmp1, #0x1 -+ beq 1b -+ - /* Shutdown */ - ldr r0, .shdwc - mov tmp1, #0xA5000000 diff --git a/target/linux/at91/patches-5.15/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch b/target/linux/at91/patches-5.15/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch deleted file mode 100644 index e496245061..0000000000 --- a/target/linux/at91/patches-5.15/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 3f55310c00b8c478da1458704027036c1a414973 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:03 +0300 -Subject: [PATCH 212/247] ARM: at91: pm: add sama7g5 ddr controller - -Add SAMA7G5 DDR controller to the list of DDR controller compatibles. -At the moment there is no standby support. Adapt the code for this. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-18-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -548,6 +548,7 @@ static const struct of_device_id ramc_id - { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] }, - { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] }, - { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] }, -+ { .compatible = "microchip,sama7g5-uddrc", }, - { /*sentinel*/ } - }; - -@@ -569,9 +570,11 @@ static __init int at91_dt_ramc(void) - } - - ramc = of_id->data; -- if (!standby) -- standby = ramc->idle; -- soc_pm.data.memctrl = ramc->memctrl; -+ if (ramc) { -+ if (!standby) -+ standby = ramc->idle; -+ soc_pm.data.memctrl = ramc->memctrl; -+ } - - idx++; - } diff --git a/target/linux/at91/patches-5.15/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch b/target/linux/at91/patches-5.15/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch deleted file mode 100644 index 89dcacec92..0000000000 --- a/target/linux/at91/patches-5.15/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch +++ /dev/null @@ -1,94 +0,0 @@ -From bbbbf16c44f34a2d563fa7d71de64ffe3b4b82dc Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:04 +0300 -Subject: [PATCH 213/247] ARM: at91: pm: add sama7g5 ddr phy controller - -SAMA7G5 self-refresh procedure accesses also the DDR PHY registers. -Adapt the code so that the at91_dt_ramc() to look also for DDR PHYs, -in case it is mandatory. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-19-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 27 +++++++++++++++++++++------ - 1 file changed, 21 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -552,7 +552,12 @@ static const struct of_device_id ramc_id - { /*sentinel*/ } - }; - --static __init int at91_dt_ramc(void) -+static const struct of_device_id ramc_phy_ids[] __initconst = { -+ { .compatible = "microchip,sama7g5-ddr3phy", }, -+ { /* Sentinel. */ }, -+}; -+ -+static __init void at91_dt_ramc(bool phy_mandatory) - { - struct device_node *np; - const struct of_device_id *of_id; -@@ -585,6 +590,16 @@ static __init int at91_dt_ramc(void) - goto unmap_ramc; - } - -+ /* Lookup for DDR PHY node, if any. */ -+ for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) { -+ soc_pm.data.ramc_phy = of_iomap(np, 0); -+ if (!soc_pm.data.ramc_phy) -+ panic(pr_fmt("unable to map ramc phy cpu registers\n")); -+ } -+ -+ if (phy_mandatory && !soc_pm.data.ramc_phy) -+ panic(pr_fmt("DDR PHY is mandatory!\n")); -+ - if (!standby) { - pr_warn("ramc no standby function available\n"); - return 0; -@@ -953,7 +968,7 @@ void __init at91rm9200_pm_init(void) - soc_pm.data.standby_mode = AT91_PM_STANDBY; - soc_pm.data.suspend_mode = AT91_PM_ULP0; - -- ret = at91_dt_ramc(); -+ ret = at91_dt_ramc(false); - if (ret) - return; - -@@ -980,7 +995,7 @@ void __init sam9x60_pm_init(void) - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); - at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); -- ret = at91_dt_ramc(); -+ ret = at91_dt_ramc(false); - if (ret) - return; - -@@ -1005,7 +1020,7 @@ void __init at91sam9_pm_init(void) - soc_pm.data.standby_mode = AT91_PM_STANDBY; - soc_pm.data.suspend_mode = AT91_PM_ULP0; - -- ret = at91_dt_ramc(); -+ ret = at91_dt_ramc(false); - if (ret) - return; - -@@ -1023,7 +1038,7 @@ void __init sama5_pm_init(void) - return; - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); -- ret = at91_dt_ramc(); -+ ret = at91_dt_ramc(false); - if (ret) - return; - -@@ -1048,7 +1063,7 @@ void __init sama5d2_pm_init(void) - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); - at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); -- ret = at91_dt_ramc(); -+ ret = at91_dt_ramc(false); - if (ret) - return; - diff --git a/target/linux/at91/patches-5.15/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch b/target/linux/at91/patches-5.15/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch deleted file mode 100644 index a46b5acb22..0000000000 --- a/target/linux/at91/patches-5.15/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch +++ /dev/null @@ -1,151 +0,0 @@ -From b355bb98eae3e343969fc5a0203e0dab472a6acd Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:05 +0300 -Subject: [PATCH 214/247] ARM: at91: pm: save ddr phy calibration data to - securam - -The resuming from backup mode is done with the help of bootloader. -The bootloader reconfigure the DDR controller and DDR PHY controller. -To speed-up the resuming process save the PHY calibration data into -SECURAM before suspending (securam is powered on backup mode). -This data will be later used by bootloader in DDR PHY reconfiguration -process. Also, in the process or recalibration the first 8 words of -the memory may get corrupted. To solve this, these 8 words are saved -in the securam and restored by bootloader in the process of PHY -configuration. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-20-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 60 ++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 59 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -10,6 +10,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -27,18 +28,23 @@ - #include "generic.h" - #include "pm.h" - -+#define BACKUP_DDR_PHY_CALIBRATION (9) -+ - /** - * struct at91_pm_bu - AT91 power management backup unit data structure - * @suspended: true if suspended to backup mode - * @reserved: reserved - * @canary: canary data for memory checking after exit from backup mode - * @resume: resume API -+ * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words -+ * of the memory - */ - struct at91_pm_bu { - int suspended; - unsigned long reserved; - phys_addr_t canary; - phys_addr_t resume; -+ unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION]; - }; - - /** -@@ -48,6 +54,7 @@ struct at91_pm_bu { - * @ws_ids: wakup sources of_device_id array - * @data: PM data to be used on last phase of suspend - * @bu: backup unit mapped data (for backup mode) -+ * @memcs: memory chip select - */ - struct at91_soc_pm { - int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); -@@ -55,6 +62,7 @@ struct at91_soc_pm { - const struct of_device_id *ws_ids; - struct at91_pm_bu *bu; - struct at91_pm_data data; -+ void *memcs; - }; - - /** -@@ -316,6 +324,19 @@ extern u32 at91_pm_suspend_in_sram_sz; - - static int at91_suspend_finish(unsigned long val) - { -+ int i; -+ -+ if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) { -+ /* -+ * The 1st 8 words of memory might get corrupted in the process -+ * of DDR PHY recalibration; it is saved here in securam and it -+ * will be restored later, after recalibration, by bootloader -+ */ -+ for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++) -+ soc_pm.bu->ddr_phy_calibration[i] = -+ *((unsigned int *)soc_pm.memcs + (i - 1)); -+ } -+ - flush_cache_all(); - outer_disable(); - -@@ -688,12 +709,40 @@ static bool __init at91_is_pm_mode_activ - soc_pm.data.suspend_mode == pm_mode); - } - -+static int __init at91_pm_backup_scan_memcs(unsigned long node, -+ const char *uname, int depth, -+ void *data) -+{ -+ const char *type; -+ const __be32 *reg; -+ int *located = data; -+ int size; -+ -+ /* Memory node already located. */ -+ if (*located) -+ return 0; -+ -+ type = of_get_flat_dt_prop(node, "device_type", NULL); -+ -+ /* We are scanning "memory" nodes only. */ -+ if (!type || strcmp(type, "memory")) -+ return 0; -+ -+ reg = of_get_flat_dt_prop(node, "reg", &size); -+ if (reg) { -+ soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg)); -+ *located = 1; -+ } -+ -+ return 0; -+} -+ - static int __init at91_pm_backup_init(void) - { - struct gen_pool *sram_pool; - struct device_node *np; - struct platform_device *pdev; -- int ret = -ENODEV; -+ int ret = -ENODEV, located = 0; - - if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) - return -EPERM; -@@ -728,6 +777,15 @@ static int __init at91_pm_backup_init(vo - soc_pm.bu->suspended = 0; - soc_pm.bu->canary = __pa_symbol(&canary); - soc_pm.bu->resume = __pa_symbol(cpu_resume); -+ if (soc_pm.data.ramc_phy) { -+ of_scan_flat_dt(at91_pm_backup_scan_memcs, &located); -+ if (!located) -+ goto securam_fail; -+ -+ /* DDR3PHY_ZQ0SR0 */ -+ soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy + -+ 0x188); -+ } - - return 0; - diff --git a/target/linux/at91/patches-5.15/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.15/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch deleted file mode 100644 index cc5f4aec0a..0000000000 --- a/target/linux/at91/patches-5.15/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 62be32b56ff31b2cd048a53fac40a165c5bc66cd Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:06 +0300 -Subject: [PATCH 215/247] ARM: at91: pm: add backup mode support for SAMA7G5 - -Adapt at91_pm_backup_init() to work for SAMA7G5. Also, set the LPM pin -to shutdown controller. This will signal to PMIC that it needs to switch -to the state corresponding to backup mode. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-21-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 3 ++- - arch/arm/mach-at91/pm_suspend.S | 7 +++++++ - 2 files changed, 9 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -744,7 +744,8 @@ static int __init at91_pm_backup_init(vo - struct platform_device *pdev; - int ret = -ENODEV, located = 0; - -- if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) -+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) && -+ !IS_ENABLED(CONFIG_SOC_SAMA7G5)) - return -EPERM; - - if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -106,6 +106,12 @@ lp_done_\ena: - #endif - .endm - -+ .macro at91_backup_set_lpm reg -+#ifdef CONFIG_SOC_SAMA7 -+ orr \reg, \reg, #0x200000 -+#endif -+ .endm -+ - .text - - .arm -@@ -989,6 +995,7 @@ ulp_exit: - ldr r0, .shdwc - mov tmp1, #0xA5000000 - add tmp1, tmp1, #0x1 -+ at91_backup_set_lpm tmp1 - str tmp1, [r0, #0] - .endm - diff --git a/target/linux/at91/patches-5.15/216-ARM-at91-pm-add-sama7g5-s-pmc.patch b/target/linux/at91/patches-5.15/216-ARM-at91-pm-add-sama7g5-s-pmc.patch deleted file mode 100644 index a471195fbc..0000000000 --- a/target/linux/at91/patches-5.15/216-ARM-at91-pm-add-sama7g5-s-pmc.patch +++ /dev/null @@ -1,36 +0,0 @@ -From e9855ac00e8d9a2c41cea42b4f38a2b0b010bef3 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:07 +0300 -Subject: [PATCH 216/247] ARM: at91: pm: add sama7g5's pmc - -Add SAMA7G5's PMC to compatible list. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-22-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -912,6 +912,11 @@ static const struct pmc_info pmc_infos[] - .mckr = 0x28, - .version = AT91_PMC_V2, - }, -+ { -+ .mckr = 0x28, -+ .version = AT91_PMC_V2, -+ }, -+ - }; - - static const struct of_device_id atmel_pmc_ids[] __initconst = { -@@ -927,6 +932,7 @@ static const struct of_device_id atmel_p - { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, - { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, - { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, -+ { .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] }, - { /* sentinel */ }, - }; - diff --git a/target/linux/at91/patches-5.15/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch b/target/linux/at91/patches-5.15/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch deleted file mode 100644 index dca065971b..0000000000 --- a/target/linux/at91/patches-5.15/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch +++ /dev/null @@ -1,63 +0,0 @@ -From dea645bce478cc72a2bf2413ec873927d1471442 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Thu, 15 Apr 2021 13:50:08 +0300 -Subject: [PATCH 217/247] ARM: at91: sama7: introduce sama7 SoC family - -Introduce new family of SoCs, sama7, and first SoC, sama7g5. - -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: keep only the sama7_dt] -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-23-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/Makefile | 1 + - arch/arm/mach-at91/sama7.c | 32 ++++++++++++++++++++++++++++++++ - 2 files changed, 33 insertions(+) - create mode 100644 arch/arm/mach-at91/sama7.c - ---- a/arch/arm/mach-at91/Makefile -+++ b/arch/arm/mach-at91/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm92 - obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o - obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o - obj-$(CONFIG_SOC_SAMA5) += sama5.o -+obj-$(CONFIG_SOC_SAMA7) += sama7.o - obj-$(CONFIG_SOC_SAMV7) += samv7.o - - # Power Management ---- /dev/null -+++ b/arch/arm/mach-at91/sama7.c -@@ -0,0 +1,32 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * Setup code for SAMA7 -+ * -+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries -+ * -+ */ -+ -+#include -+#include -+ -+#include -+#include -+ -+#include "generic.h" -+ -+static void __init sama7_dt_device_init(void) -+{ -+ of_platform_default_populate(NULL, NULL, NULL); -+} -+ -+static const char *const sama7_dt_board_compat[] __initconst = { -+ "microchip,sama7", -+ NULL -+}; -+ -+DT_MACHINE_START(sama7_dt, "Microchip SAMA7") -+ /* Maintainer: Microchip */ -+ .init_machine = sama7_dt_device_init, -+ .dt_compat = sama7_dt_board_compat, -+MACHINE_END -+ diff --git a/target/linux/at91/patches-5.15/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.15/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch deleted file mode 100644 index aada9c9679..0000000000 --- a/target/linux/at91/patches-5.15/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch +++ /dev/null @@ -1,96 +0,0 @@ -From aba3984dc7a405d20b83bff603d23719d0e26bc7 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:09 +0300 -Subject: [PATCH 218/247] ARM: at91: pm: add pm support for SAMA7G5 - -Add support for SAMA7G5 power management modes: standby, ulp0, ulp1, backup. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-24-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/generic.h | 2 ++ - arch/arm/mach-at91/pm.c | 37 ++++++++++++++++++++++++++++++++++++ - arch/arm/mach-at91/sama7.c | 1 + - 3 files changed, 40 insertions(+) - ---- a/arch/arm/mach-at91/generic.h -+++ b/arch/arm/mach-at91/generic.h -@@ -14,12 +14,14 @@ extern void __init at91sam9_pm_init(void - extern void __init sam9x60_pm_init(void); - extern void __init sama5_pm_init(void); - extern void __init sama5d2_pm_init(void); -+extern void __init sama7_pm_init(void); - #else - static inline void __init at91rm9200_pm_init(void) { } - static inline void __init at91sam9_pm_init(void) { } - static inline void __init sam9x60_pm_init(void) { } - static inline void __init sama5_pm_init(void) { } - static inline void __init sama5d2_pm_init(void) { } -+static inline void __init sama7_pm_init(void) { } - #endif - - #endif /* _AT91_GENERIC_H */ ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -152,6 +152,17 @@ static const struct of_device_id sam9x60 - { /* sentinel */ } - }; - -+static const struct of_device_id sama7g5_ws_ids[] = { -+ { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, -+ { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] }, -+ { .compatible = "usb-ohci", .data = &ws_info[2] }, -+ { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, -+ { .compatible = "usb-ehci", .data = &ws_info[2] }, -+ { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] }, -+ { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, -+ { /* sentinel */ } -+}; -+ - static int at91_pm_config_ws(unsigned int pm_mode, bool set) - { - const struct wakeup_source_info *wsi; -@@ -1139,6 +1150,32 @@ void __init sama5d2_pm_init(void) - soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws; - } - -+void __init sama7_pm_init(void) -+{ -+ static const int modes[] __initconst = { -+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP, -+ }; -+ static const u32 iomaps[] __initconst = { -+ [AT91_PM_ULP0] = AT91_PM_IOMAP(SFRBU), -+ [AT91_PM_ULP1] = AT91_PM_IOMAP(SFRBU) | -+ AT91_PM_IOMAP(SHDWC), -+ [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) | -+ AT91_PM_IOMAP(SHDWC), -+ }; -+ -+ if (!IS_ENABLED(CONFIG_SOC_SAMA7)) -+ return; -+ -+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); -+ -+ at91_dt_ramc(true); -+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); -+ at91_pm_init(NULL); -+ -+ soc_pm.ws_ids = sama7g5_ws_ids; -+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; -+} -+ - static int __init at91_pm_modes_select(char *str) - { - char *s; ---- a/arch/arm/mach-at91/sama7.c -+++ b/arch/arm/mach-at91/sama7.c -@@ -17,6 +17,7 @@ - static void __init sama7_dt_device_init(void) - { - of_platform_default_populate(NULL, NULL, NULL); -+ sama7_pm_init(); - } - - static const char *const sama7_dt_board_compat[] __initconst = { diff --git a/target/linux/at91/patches-5.15/219-ARM-at91-pm-add-sama7g5-shdwc.patch b/target/linux/at91/patches-5.15/219-ARM-at91-pm-add-sama7g5-shdwc.patch deleted file mode 100644 index 062274c18f..0000000000 --- a/target/linux/at91/patches-5.15/219-ARM-at91-pm-add-sama7g5-shdwc.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 84ff37cc98e6aaefe27d6edd5e3ced2be99d9833 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 15 Apr 2021 13:50:10 +0300 -Subject: [PATCH 219/247] ARM: at91: pm: add sama7g5 shdwc - -Add SAMA7G5 SHDWC. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210415105010.569620-25-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -809,6 +809,7 @@ securam_fail: - static const struct of_device_id atmel_shdwc_ids[] = { - { .compatible = "atmel,sama5d2-shdwc" }, - { .compatible = "microchip,sam9x60-shdwc" }, -+ { .compatible = "microchip,sama7g5-shdwc" }, - { /* sentinel. */ } - }; - diff --git a/target/linux/at91/patches-5.15/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch b/target/linux/at91/patches-5.15/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch deleted file mode 100644 index fdb45afa7d..0000000000 --- a/target/linux/at91/patches-5.15/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch +++ /dev/null @@ -1,233 +0,0 @@ -From 2223a85aed2d892bd7c13053f27e777c743e5332 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Mon, 28 Jun 2021 15:04:51 +0300 -Subject: [PATCH 220/247] ARM: configs: at91: add defconfig for sama7 family of - SoCs - -Add defconfig for sama7 SoC family. - -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power] -Signed-off-by: Claudiu Beznea -[codrin.ciubotariu@microchip.com: add audio] -Signed-off-by: Codrin Ciubotariu -[nicolas.ferre@microchip.com: atags not set, mtd tests, spi gpio] -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210628120452.74408-3-eugen.hristev@microchip.com ---- - arch/arm/configs/sama7_defconfig | 209 +++++++++++++++++++++++++++++++ - 1 file changed, 209 insertions(+) - create mode 100644 arch/arm/configs/sama7_defconfig - ---- /dev/null -+++ b/arch/arm/configs/sama7_defconfig -@@ -0,0 +1,209 @@ -+# CONFIG_LOCALVERSION_AUTO is not set -+# CONFIG_SWAP is not set -+CONFIG_SYSVIPC=y -+CONFIG_NO_HZ_IDLE=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_LOG_BUF_SHIFT=16 -+CONFIG_CGROUPS=y -+CONFIG_CGROUP_DEBUG=y -+CONFIG_NAMESPACES=y -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+CONFIG_BLK_DEV_INITRD=y -+# CONFIG_FHANDLE is not set -+# CONFIG_IO_URING is not set -+CONFIG_KALLSYMS_ALL=y -+CONFIG_EMBEDDED=y -+# CONFIG_VM_EVENT_COUNTERS is not set -+CONFIG_SLAB=y -+CONFIG_ARCH_AT91=y -+CONFIG_SOC_SAMA7G5=y -+CONFIG_ATMEL_CLOCKSOURCE_TCB=y -+# CONFIG_CACHE_L2X0 is not set -+# CONFIG_ARM_PATCH_IDIV is not set -+# CONFIG_CPU_SW_DOMAIN_PAN is not set -+CONFIG_FORCE_MAX_ZONEORDER=15 -+CONFIG_UACCESS_WITH_MEMCPY=y -+# CONFIG_ATAGS is not set -+CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel" -+CONFIG_VFP=y -+CONFIG_NEON=y -+CONFIG_KERNEL_MODE_NEON=y -+CONFIG_MODULES=y -+CONFIG_MODULE_FORCE_LOAD=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_BLK_DEV_BSG is not set -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_COREDUMP is not set -+# CONFIG_COMPACTION is not set -+CONFIG_CMA=y -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_INET_DIAG is not set -+CONFIG_IPV6_SIT_6RD=y -+CONFIG_BRIDGE=m -+CONFIG_BRIDGE_VLAN_FILTERING=y -+CONFIG_NET_DSA=m -+CONFIG_VLAN_8021Q=m -+CONFIG_CAN=y -+CONFIG_CAN_M_CAN=y -+CONFIG_CAN_M_CAN_PLATFORM=y -+CONFIG_BT=y -+CONFIG_BT_RFCOMM=y -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=y -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=y -+CONFIG_BT_HCIBTUSB=y -+CONFIG_BT_HCIUART=y -+CONFIG_BT_HCIUART_H4=y -+CONFIG_BT_HCIVHCI=y -+CONFIG_CFG80211=m -+# CONFIG_CFG80211_DEFAULT_PS is not set -+CONFIG_CFG80211_DEBUGFS=y -+CONFIG_CFG80211_WEXT=y -+CONFIG_MAC80211=m -+CONFIG_MAC80211_LEDS=y -+CONFIG_RFKILL=y -+CONFIG_RFKILL_INPUT=y -+CONFIG_PCCARD=y -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+# CONFIG_STANDALONE is not set -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_ALLOW_DEV_COREDUMP is not set -+CONFIG_MTD=y -+CONFIG_MTD_TESTS=m -+CONFIG_MTD_CMDLINE_PARTS=y -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=1 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+CONFIG_EEPROM_AT24=y -+CONFIG_SCSI=y -+CONFIG_BLK_DEV_SD=y -+CONFIG_NETDEVICES=y -+CONFIG_MACB=y -+CONFIG_MICREL_PHY=y -+CONFIG_INPUT_EVDEV=y -+CONFIG_KEYBOARD_GPIO=y -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_LEGACY_PTY_COUNT=4 -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_HW_RANDOM=y -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_AT91=y -+CONFIG_SPI=y -+CONFIG_SPI_MEM=y -+CONFIG_SPI_ATMEL=y -+CONFIG_SPI_GPIO=y -+CONFIG_PINCTRL_AT91=y -+CONFIG_PINCTRL_AT91PIO4=y -+CONFIG_GPIO_SYSFS=y -+CONFIG_POWER_RESET=y -+CONFIG_POWER_RESET_AT91_RESET=y -+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y -+# CONFIG_HWMON is not set -+CONFIG_WATCHDOG=y -+CONFIG_SAMA5D4_WATCHDOG=y -+CONFIG_MFD_ATMEL_FLEXCOM=y -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_FIXED_VOLTAGE=y -+CONFIG_REGULATOR_MCP16502=y -+CONFIG_MEDIA_SUPPORT=y -+CONFIG_MEDIA_SUPPORT_FILTER=y -+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -+CONFIG_MEDIA_CAMERA_SUPPORT=y -+CONFIG_MEDIA_PLATFORM_SUPPORT=y -+CONFIG_V4L_PLATFORM_DRIVERS=y -+CONFIG_VIDEO_IMX219=m -+CONFIG_VIDEO_IMX274=m -+CONFIG_VIDEO_OV5647=m -+CONFIG_SOUND=y -+CONFIG_SND=y -+CONFIG_SND_SOC=y -+CONFIG_SND_ATMEL_SOC=y -+CONFIG_SND_SOC_MIKROE_PROTO=m -+CONFIG_SND_MCHP_SOC_I2S_MCC=y -+CONFIG_SND_MCHP_SOC_SPDIFTX=y -+CONFIG_SND_MCHP_SOC_SPDIFRX=y -+CONFIG_SND_SOC_PCM5102A=y -+CONFIG_SND_SOC_SPDIF=y -+CONFIG_SND_SIMPLE_CARD=y -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_DYNAMIC_MINORS=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_STORAGE=y -+CONFIG_USB_UAS=y -+CONFIG_USB_GADGET=y -+CONFIG_U_SERIAL_CONSOLE=y -+CONFIG_USB_ATMEL_USBA=m -+CONFIG_USB_CONFIGFS=y -+CONFIG_USB_CONFIGFS_ACM=y -+CONFIG_USB_CONFIGFS_MASS_STORAGE=y -+CONFIG_USB_CONFIGFS_F_UVC=y -+CONFIG_USB_G_SERIAL=m -+CONFIG_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SDHCI_OF_AT91=y -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_NVMEM is not set -+CONFIG_RTC_DRV_AT91RM9200=y -+CONFIG_RTC_DRV_AT91SAM9=y -+CONFIG_DMADEVICES=y -+CONFIG_AT_XDMAC=y -+CONFIG_DMATEST=y -+CONFIG_STAGING=y -+CONFIG_MICROCHIP_PIT64B=y -+# CONFIG_IOMMU_SUPPORT is not set -+# CONFIG_ATMEL_EBI is not set -+CONFIG_IIO=y -+CONFIG_IIO_SW_TRIGGER=y -+CONFIG_AT91_SAMA5D2_ADC=y -+CONFIG_PWM=y -+CONFIG_PWM_ATMEL=y -+CONFIG_EXT2_FS=y -+CONFIG_EXT3_FS=y -+CONFIG_FANOTIFY=y -+CONFIG_VFAT_FS=y -+CONFIG_TMPFS=y -+CONFIG_NFS_FS=y -+CONFIG_ROOT_NFS=y -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_850=y -+CONFIG_NLS_ISO8859_1=y -+CONFIG_NLS_UTF8=y -+CONFIG_LSM="N" -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+# CONFIG_CRYPTO_HW is not set -+CONFIG_CRC_CCITT=y -+CONFIG_CRC_ITU_T=y -+CONFIG_DMA_CMA=y -+CONFIG_CMA_SIZE_MBYTES=32 -+CONFIG_CMA_ALIGNMENT=9 -+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_DEBUG_MISC is not set -+# CONFIG_SCHED_DEBUG is not set -+CONFIG_STACKTRACE=y -+# CONFIG_FTRACE is not set -+CONFIG_DEBUG_USER=y -+# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/target/linux/at91/patches-5.15/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch b/target/linux/at91/patches-5.15/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch deleted file mode 100644 index 6c95d4a0f5..0000000000 --- a/target/linux/at91/patches-5.15/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch +++ /dev/null @@ -1,33 +0,0 @@ -From a62536054548e85da84ed835dc87baa8e5e99b41 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Mon, 28 Jun 2021 15:04:52 +0300 -Subject: [PATCH 221/247] ARM: multi_v7_defconfig: add sama7g5 SoC - -Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig. -Also add it's clock timer, the PIT64B. - -Signed-off-by: Eugen Hristev -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com ---- - arch/arm/configs/multi_v7_defconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/configs/multi_v7_defconfig -+++ b/arch/arm/configs/multi_v7_defconfig -@@ -15,6 +15,7 @@ CONFIG_ARCH_AT91=y - CONFIG_SOC_SAMA5D2=y - CONFIG_SOC_SAMA5D3=y - CONFIG_SOC_SAMA5D4=y -+CONFIG_SOC_SAMA7G5=y - CONFIG_ARCH_BCM=y - CONFIG_ARCH_BCM_CYGNUS=y - CONFIG_ARCH_BCM_HR2=y -@@ -967,6 +968,7 @@ CONFIG_APQ_MMCC_8084=y - CONFIG_MSM_GCC_8660=y - CONFIG_MSM_MMCC_8960=y - CONFIG_MSM_MMCC_8974=y -+CONFIG_MICROCHIP_PIT64B=y - CONFIG_BCM2835_MBOX=y - CONFIG_ROCKCHIP_IOMMU=y - CONFIG_TEGRA_IOMMU_GART=y diff --git a/target/linux/at91/patches-5.15/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch b/target/linux/at91/patches-5.15/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch deleted file mode 100644 index b79ce5ab2e..0000000000 --- a/target/linux/at91/patches-5.15/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch +++ /dev/null @@ -1,2154 +0,0 @@ -From 969b39d51b7df0869cca9983b06cefb59dae72b0 Mon Sep 17 00:00:00 2001 -From: Eugen Hristev -Date: Mon, 28 Jun 2021 15:04:50 +0300 -Subject: [PATCH 222/247] ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek - -Add Device Tree for sama7g5 SoC and associated board sama7g5-ek - -Signed-off-by: Eugen Hristev -[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power] -Signed-off-by: Claudiu Beznea -[codrin.ciubotariu@microchip.com: add audio] -Signed-off-by: Codrin Ciubotariu -[nicolas.ferre@microchip.com: removed eeproms, reorder i2s dma chans] -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210628120452.74408-2-eugen.hristev@microchip.com -[claudiu.beznea: adapt to kernel v5.10] -Signed-off-by: Claudiu Beznea ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/at91-sama7g5ek.dts | 656 +++++++++++++++++++ - arch/arm/boot/dts/sama7g5-pinfunc.h | 923 +++++++++++++++++++++++++++ - arch/arm/boot/dts/sama7g5.dtsi | 528 +++++++++++++++ - 4 files changed, 2109 insertions(+) - create mode 100644 arch/arm/boot/dts/at91-sama7g5ek.dts - create mode 100644 arch/arm/boot/dts/sama7g5-pinfunc.h - create mode 100644 arch/arm/boot/dts/sama7g5.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -79,6 +79,8 @@ dtb-$(CONFIG_ARCH_ATLAS6) += \ - atlas6-evb.dtb - dtb-$(CONFIG_ARCH_ATLAS7) += \ - atlas7-evb.dtb -+dtb-$(CONFIG_SOC_SAMA7G5) += \ -+ at91-sama7g5ek.dtb - dtb-$(CONFIG_ARCH_AXXIA) += \ - axm5516-amarillo.dtb - dtb-$(CONFIG_ARCH_BCM2835) += \ ---- /dev/null -+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts -@@ -0,0 +1,656 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board -+ * -+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries -+ * -+ * Author: Eugen Hristev -+ * Author: Claudiu Beznea -+ * -+ */ -+/dts-v1/; -+#include "sama7g5-pinfunc.h" -+#include "sama7g5.dtsi" -+#include -+#include -+ -+/ { -+ model = "Microchip SAMA7G5-EK"; -+ compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7"; -+ -+ chosen { -+ bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait"; -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ aliases { -+ serial0 = &uart3; -+ serial1 = &uart4; -+ serial2 = &uart7; -+ serial3 = &uart0; -+ i2c0 = &i2c1; -+ i2c1 = &i2c8; -+ i2c2 = &i2c9; -+ }; -+ -+ clocks { -+ slow_xtal { -+ clock-frequency = <32768>; -+ }; -+ -+ main_xtal { -+ clock-frequency = <24000000>; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_key_gpio_default>; -+ -+ bp1 { -+ label = "PB_USER"; -+ gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; -+ linux,code = ; -+ wakeup-source; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_led_gpio_default>; -+ status = "okay"; /* Conflict with pwm. */ -+ -+ red_led { -+ label = "red"; -+ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green_led { -+ label = "green"; -+ gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ blue_led { -+ label = "blue"; -+ gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ }; -+ -+ /* 512 M */ -+ memory@60000000 { -+ device_type = "memory"; -+ reg = <0x60000000 0x20000000>; -+ }; -+ -+ sound: sound { -+ compatible = "simple-audio-card"; -+ simple-audio-card,name = "sama7g5ek audio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ simple-audio-card,dai-link@0 { -+ reg = <0>; -+ cpu { -+ sound-dai = <&spdiftx>; -+ }; -+ codec { -+ sound-dai = <&spdif_out>; -+ }; -+ }; -+ simple-audio-card,dai-link@1 { -+ reg = <1>; -+ cpu { -+ sound-dai = <&spdifrx>; -+ }; -+ codec { -+ sound-dai = <&spdif_in>; -+ }; -+ }; -+ }; -+ -+ spdif_in: spdif-in { -+ #sound-dai-cells = <0>; -+ compatible = "linux,spdif-dir"; -+ }; -+ -+ spdif_out: spdif-out { -+ #sound-dai-cells = <0>; -+ compatible = "linux,spdif-dit"; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vddcpu>; -+}; -+ -+&dma0 { -+ status = "okay"; -+}; -+ -+&dma1 { -+ status = "okay"; -+}; -+ -+&dma2 { -+ status = "okay"; -+}; -+ -+&flx0 { -+ atmel,flexcom-mode = ; -+ status = "disabled"; -+ -+ uart0: serial@200 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx0_default>; -+ status = "disabled"; -+ }; -+}; -+ -+&flx1 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ i2c1: i2c@600 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1_default>; -+ i2c-analog-filter; -+ i2c-digital-filter; -+ i2c-digital-filter-width-ns = <35>; -+ status = "okay"; -+ -+ mcp16502@5b { -+ compatible = "microchip,mcp16502"; -+ reg = <0x5b>; -+ status = "okay"; -+ -+ regulators { -+ vdd_3v3: VDD_IO { -+ regulator-name = "VDD_IO"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <3700000>; -+ regulator-initial-mode = <2>; -+ regulator-allowed-modes = <2>, <4>; -+ regulator-always-on; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ regulator-mode = <4>; -+ }; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ regulator-mode = <4>; -+ }; -+ }; -+ -+ vddioddr: VDD_DDR { -+ regulator-name = "VDD_DDR"; -+ regulator-min-microvolt = <1300000>; -+ regulator-max-microvolt = <1450000>; -+ regulator-initial-mode = <2>; -+ regulator-allowed-modes = <2>, <4>; -+ regulator-always-on; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ regulator-mode = <4>; -+ }; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-mode = <4>; -+ }; -+ }; -+ -+ vddcore: VDD_CORE { -+ regulator-name = "VDD_CORE"; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1850000>; -+ regulator-initial-mode = <2>; -+ regulator-allowed-modes = <2>, <4>; -+ regulator-always-on; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ regulator-mode = <4>; -+ }; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ regulator-mode = <4>; -+ }; -+ }; -+ -+ vddcpu: VDD_OTHER { -+ regulator-name = "VDD_OTHER"; -+ regulator-min-microvolt = <1125000>; -+ regulator-max-microvolt = <1850000>; -+ regulator-initial-mode = <2>; -+ regulator-allowed-modes = <2>, <4>; -+ regulator-ramp-delay = <3125>; -+ regulator-always-on; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ regulator-mode = <4>; -+ }; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ regulator-mode = <4>; -+ }; -+ }; -+ -+ vldo1: LDO1 { -+ regulator-name = "LDO1"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <3700000>; -+ regulator-always-on; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ }; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vldo2: LDO2 { -+ regulator-name = "LDO2"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <3700000>; -+ -+ regulator-state-standby { -+ regulator-on-in-suspend; -+ }; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&flx3 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ uart3: serial@200 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx3_default>; -+ status = "okay"; -+ }; -+}; -+ -+&flx4 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ uart4: serial@200 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx4_default>; -+ status = "okay"; -+ }; -+}; -+ -+&flx7 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ uart7: serial@200 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flx7_default>; -+ status = "okay"; -+ }; -+}; -+ -+&flx8 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ i2c8: i2c@600 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c8_default>; -+ i2c-analog-filter; -+ i2c-digital-filter; -+ i2c-digital-filter-width-ns = <35>; -+ status = "okay"; -+ }; -+}; -+ -+&flx9 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ i2c9: i2c@600 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c9_default>; -+ i2c-analog-filter; -+ i2c-digital-filter; -+ i2c-digital-filter-width-ns = <35>; -+ status = "okay"; -+ }; -+}; -+ -+&flx11 { -+ atmel,flexcom-mode = ; -+ status = "okay"; -+ -+ spi11: spi@400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; -+ status = "okay"; -+ }; -+}; -+ -+&gmac0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+ -+ ethernet-phy@7 { -+ reg = <0x7>; -+ interrupt-parent = <&pioA>; -+ interrupts = ; -+ }; -+}; -+ -+&gmac1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>; -+ phy-mode = "rmii"; -+ status = "okay"; -+ -+ ethernet-phy@0 { -+ reg = <0x0>; -+ interrupt-parent = <&pioA>; -+ interrupts = ; -+ }; -+}; -+ -+&i2s0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2s0_default>; -+}; -+ -+&pioA { -+ pinctrl_flx0_default: flx0_default { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_flx3_default: flx3_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_flx4_default: flx4_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_flx7_default: flx7_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac0_default: gmac0_default { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac0_txck_default: gmac0_txck_default { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_gmac0_phy_irq: gmac0_phy_irq { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac1_default: gmac1_default { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac1_phy_irq: gmac1_phy_irq { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c1_default: i2c1_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c8_default: i2c8_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2c9_default: i2c9_default { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_i2s0_default: i2s0_default { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_key_gpio_default: key_gpio_default { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_led_gpio_default: led_gpio_default { -+ pinmux = , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ pinctrl_mikrobus1_an_default: mikrobus1_an_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_an_default: mikrobus2_an_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_mikrobus1_spi: mikrobus1_spi { -+ pinmux = , -+ , -+ ; -+ bias-disable; -+ }; -+ -+ pinctrl_sdmmc0_default: sdmmc0_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ ck_cd_rstn_vddsel { -+ pinmux = , -+ , -+ ; -+ bias-pull-up; -+ }; -+ }; -+ -+ pinctrl_sdmmc1_default: sdmmc1_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ ck_cd_rstn_vddsel { -+ pinmux = , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ }; -+ -+ pinctrl_sdmmc2_default: sdmmc2_default { -+ cmd_data { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ bias-pull-up; -+ }; -+ -+ ck { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ }; -+ -+ pinctrl_spdifrx_default: spdifrx_default { -+ pinmux = ; -+ bias-disable; -+ }; -+ -+ pinctrl_spdiftx_default: spdiftx_default { -+ pinmux = ; -+ bias-disable; -+ }; -+}; -+ -+&pwm { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>; -+ status = "disabled"; /* Conflict with leds. */ -+}; -+ -+&rtt { -+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>; -+}; -+ -+&sdmmc0 { -+ bus-width = <8>; -+ non-removable; -+ no-1-8-v; -+ sdhci-caps-mask = <0x0 0x00200000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc0_default>; -+ status = "okay"; -+}; -+ -+&sdmmc1 { -+ bus-width = <4>; -+ no-1-8-v; -+ sdhci-caps-mask = <0x0 0x00200000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc1_default>; -+ status = "okay"; -+}; -+ -+&sdmmc2 { -+ bus-width = <4>; -+ no-1-8-v; -+ sdhci-caps-mask = <0x0 0x00200000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_sdmmc2_default>; -+}; -+ -+&spdifrx { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_spdifrx_default>; -+ status = "okay"; -+}; -+ -+&spdiftx { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_spdiftx_default>; -+ status = "okay"; -+}; -+ -+&trng { -+ status = "okay"; -+}; -+ -+&vddout25 { -+ vin-supply = <&vdd_3v3>; -+ status = "okay"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h -@@ -0,0 +1,923 @@ -+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -+#define PINMUX_PIN(no, func, ioset) \ -+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) -+ -+#define PIN_PA0 0 -+#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) -+#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) -+#define PIN_PA0__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA0, 2, 1) -+#define PIN_PA0__CANTX3 PINMUX_PIN(PIN_PA0, 3, 1) -+#define PIN_PA0__PWML0 PINMUX_PIN(PIN_PA0, 5, 2) -+#define PIN_PA1 1 -+#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) -+#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) -+#define PIN_PA1__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA1, 2, 1) -+#define PIN_PA1__CANRX3 PINMUX_PIN(PIN_PA1, 3, 1) -+#define PIN_PA1__D14 PINMUX_PIN(PIN_PA1, 4, 1) -+#define PIN_PA1__PWMH0 PINMUX_PIN(PIN_PA1, 5, 3) -+#define PIN_PA2 2 -+#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) -+#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1) -+#define PIN_PA2__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA2, 2, 1) -+#define PIN_PA2__PDMC1_CLK PINMUX_PIN(PIN_PA2, 3, 1) -+#define PIN_PA2__D15 PINMUX_PIN(PIN_PA2, 4, 1) -+#define PIN_PA2__PWMH1 PINMUX_PIN(PIN_PA2, 5, 3) -+#define PIN_PA2__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA2, 6, 3) -+#define PIN_PA3 3 -+#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) -+#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1) -+#define PIN_PA3__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA3, 2, 1) -+#define PIN_PA3__PDMC1_DS0 PINMUX_PIN(PIN_PA3, 3, 1) -+#define PIN_PA3__NWR1_NBS1 PINMUX_PIN(PIN_PA3, 4, 1) -+#define PIN_PA3__PWML3 PINMUX_PIN(PIN_PA3, 5, 3) -+#define PIN_PA3__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA3, 6, 3) -+#define PIN_PA4 4 -+#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) -+#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1) -+#define PIN_PA4__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA4, 2, 1) -+#define PIN_PA4__PDMC1_DS1 PINMUX_PIN(PIN_PA4, 3, 1) -+#define PIN_PA4__NCS2 PINMUX_PIN(PIN_PA4, 4, 1) -+#define PIN_PA4__PWMH3 PINMUX_PIN(PIN_PA4, 5, 3) -+#define PIN_PA4__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA4, 6, 3) -+#define PIN_PA5 5 -+#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) -+#define PIN_PA5__SDMMC0_DAT2 PINMUX_PIN(PIN_PA5, 1, 1) -+#define PIN_PA5__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA5, 2, 1) -+#define PIN_PA5__CANTX2 PINMUX_PIN(PIN_PA5, 3, 1) -+#define PIN_PA5__A23 PINMUX_PIN(PIN_PA5, 4, 1) -+#define PIN_PA5__PWMEXTRG0 PINMUX_PIN(PIN_PA5, 5, 3) -+#define PIN_PA5__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA5, 6, 3) -+#define PIN_PA6 6 -+#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) -+#define PIN_PA6__SDMMC0_DAT3 PINMUX_PIN(PIN_PA6, 1, 1) -+#define PIN_PA6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA6, 2, 1) -+#define PIN_PA6__CANRX2 PINMUX_PIN(PIN_PA6, 3, 1) -+#define PIN_PA6__A24 PINMUX_PIN(PIN_PA6, 4, 1) -+#define PIN_PA6__PWMEXTRG1 PINMUX_PIN(PIN_PA6, 5, 3) -+#define PIN_PA6__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA6, 6, 3) -+#define PIN_PA7 7 -+#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) -+#define PIN_PA7__SDMMC0_DAT4 PINMUX_PIN(PIN_PA7, 1, 1) -+#define PIN_PA7__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA7, 2, 1) -+#define PIN_PA7__CANTX1 PINMUX_PIN(PIN_PA7, 3, 1) -+#define PIN_PA7__NWAIT PINMUX_PIN(PIN_PA7, 4, 1) -+#define PIN_PA7__PWMFI0 PINMUX_PIN(PIN_PA7, 5, 3) -+#define PIN_PA7__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA7, 6, 3) -+#define PIN_PA8 8 -+#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) -+#define PIN_PA8__SDMMC0_DAT5 PINMUX_PIN(PIN_PA8, 1, 1) -+#define PIN_PA8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA8, 2, 1) -+#define PIN_PA8__CANRX1 PINMUX_PIN(PIN_PA8, 3, 1) -+#define PIN_PA8__NCS0 PINMUX_PIN(PIN_PA8, 4, 1) -+#define PIN_PA8__PWMIF1 PINMUX_PIN(PIN_PA8, 5, 3) -+#define PIN_PA8__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA8, 6, 3) -+#define PIN_PA9 9 -+#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) -+#define PIN_PA9__SDMMC0_DAT6 PINMUX_PIN(PIN_PA9, 1, 1) -+#define PIN_PA9__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA9, 2, 1) -+#define PIN_PA9__CANTX0 PINMUX_PIN(PIN_PA9, 3, 1) -+#define PIN_PA9__SMCK PINMUX_PIN(PIN_PA9, 4, 1) -+#define PIN_PA9__SPDIF_RX PINMUX_PIN(PIN_PA9, 5, 1) -+#define PIN_PA9__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA9, 6, 3) -+#define PIN_PA10 10 -+#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) -+#define PIN_PA10__SDMMC0_DAT7 PINMUX_PIN(PIN_PA10, 1, 1) -+#define PIN_PA10__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA10, 2, 1) -+#define PIN_PA10__CANRX0 PINMUX_PIN(PIN_PA10, 3, 1) -+#define PIN_PA10__NCS1 PINMUX_PIN(PIN_PA10, 4, 1) -+#define PIN_PA10__SPDIF_TX PINMUX_PIN(PIN_PA10, 5, 1) -+#define PIN_PA10__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA10, 6, 3) -+#define PIN_PA11 11 -+#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) -+#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1) -+#define PIN_PA11__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA11, 2, 1) -+#define PIN_PA11__A0_NBS0 PINMUX_PIN(PIN_PA11, 4, 1) -+#define PIN_PA11__TIOA0 PINMUX_PIN(PIN_PA11, 5, 1) -+#define PIN_PA11__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA11, 6, 3) -+#define PIN_PA12 12 -+#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) -+#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1) -+#define PIN_PA12__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA12, 2, 1) -+#define PIN_PA12__FLEXCOM3_IO5 PINMUX_PIN(PIN_PA12, 4, 1) -+#define PIN_PA12__PWML2 PINMUX_PIN(PIN_PA12, 5, 3) -+#define PIN_PA12__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA12, 6, 3) -+#define PIN_PA13 13 -+#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) -+#define PIN_PA13__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA13, 1, 1) -+#define PIN_PA13__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA13, 2, 1) -+#define PIN_PA13__FLEXCOM3_IO6 PINMUX_PIN(PIN_PA13, 4, 1) -+#define PIN_PA13__PWMH2 PINMUX_PIN(PIN_PA13, 5, 3) -+#define PIN_PA13__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA13, 6, 3) -+#define PIN_PA14 14 -+#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) -+#define PIN_PA14__SDMMC0_CD PINMUX_PIN(PIN_PA14, 1, 1) -+#define PIN_PA14__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA14, 2, 1) -+#define PIN_PA14__A25 PINMUX_PIN(PIN_PA14, 4, 1) -+#define PIN_PA14__PWML1 PINMUX_PIN(PIN_PA14, 5, 3) -+#define PIN_PA15 15 -+#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) -+#define PIN_PA15__G0_TXEN PINMUX_PIN(PIN_PA15, 1, 1) -+#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 2, 1) -+#define PIN_PA15__ISC_MCK PINMUX_PIN(PIN_PA15, 3, 1) -+#define PIN_PA15__A1 PINMUX_PIN(PIN_PA15, 4, 1) -+#define PIN_PA15__TIOB0 PINMUX_PIN(PIN_PA15, 5, 1) -+#define PIN_PA16 16 -+#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) -+#define PIN_PA16__G0_TX0 PINMUX_PIN(PIN_PA16, 1, 1) -+#define PIN_PA16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA16, 2, 1) -+#define PIN_PA16__ISC_D0 PINMUX_PIN(PIN_PA16, 3, 1) -+#define PIN_PA16__A2 PINMUX_PIN(PIN_PA16, 4, 1) -+#define PIN_PA16__TCLK0 PINMUX_PIN(PIN_PA16, 5, 1) -+#define PIN_PA17 17 -+#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) -+#define PIN_PA17__G0_TX1 PINMUX_PIN(PIN_PA17, 1, 1) -+#define PIN_PA17__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA17, 2, 1) -+#define PIN_PA17__ISC_D1 PINMUX_PIN(PIN_PA17, 3, 1) -+#define PIN_PA17__A3 PINMUX_PIN(PIN_PA17, 4, 1) -+#define PIN_PA17__TIOA1 PINMUX_PIN(PIN_PA17, 5, 1) -+#define PIN_PA18 18 -+#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) -+#define PIN_PA18__G0_RXDV PINMUX_PIN(PIN_PA18, 1, 1) -+#define PIN_PA18__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA18, 2, 1) -+#define PIN_PA18__ISC_D2 PINMUX_PIN(PIN_PA18, 3, 1) -+#define PIN_PA18__A4 PINMUX_PIN(PIN_PA18, 4, 1) -+#define PIN_PA18__TIOB1 PINMUX_PIN(PIN_PA18, 5, 1) -+#define PIN_PA19 19 -+#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) -+#define PIN_PA19__G0_RX0 PINMUX_PIN(PIN_PA19, 1, 1) -+#define PIN_PA19__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA19, 2, 1) -+#define PIN_PA19__ISC_D3 PINMUX_PIN(PIN_PA19, 3, 1) -+#define PIN_PA19__A5 PINMUX_PIN(PIN_PA19, 4, 1) -+#define PIN_PA19__TCLK1 PINMUX_PIN(PIN_PA19, 5, 1) -+#define PIN_PA20 20 -+#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) -+#define PIN_PA20__G0_RX1 PINMUX_PIN(PIN_PA20, 1, 1) -+#define PIN_PA20__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA20, 2, 1) -+#define PIN_PA20__ISC_D4 PINMUX_PIN(PIN_PA20, 3, 1) -+#define PIN_PA20__A6 PINMUX_PIN(PIN_PA20, 4, 1) -+#define PIN_PA20__TIOA2 PINMUX_PIN(PIN_PA20, 5, 1) -+#define PIN_PA21 21 -+#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) -+#define PIN_PA21__G0_RXER PINMUX_PIN(PIN_PA21, 1, 1) -+#define PIN_PA21__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA21, 2, 1) -+#define PIN_PA21__ISC_D5 PINMUX_PIN(PIN_PA21, 3, 1) -+#define PIN_PA21__A7 PINMUX_PIN(PIN_PA21, 4, 1) -+#define PIN_PA21__TIOB2 PINMUX_PIN(PIN_PA21, 5, 1) -+#define PIN_PA22 22 -+#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) -+#define PIN_PA22__G0_MDC PINMUX_PIN(PIN_PA22, 1, 1) -+#define PIN_PA22__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA22, 2, 1) -+#define PIN_PA22__ISC_D6 PINMUX_PIN(PIN_PA22, 3, 1) -+#define PIN_PA22__A8 PINMUX_PIN(PIN_PA22, 4, 1) -+#define PIN_PA22__TCLK2 PINMUX_PIN(PIN_PA22, 5, 1) -+#define PIN_PA23 23 -+#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) -+#define PIN_PA23__G0_MDIO PINMUX_PIN(PIN_PA23, 1, 1) -+#define PIN_PA23__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA23, 2, 1) -+#define PIN_PA23__ISC_D7 PINMUX_PIN(PIN_PA23, 3, 1) -+#define PIN_PA23__A9 PINMUX_PIN(PIN_PA23, 4, 1) -+#define PIN_PA24 24 -+#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) -+#define PIN_PA24__G0_TXCK PINMUX_PIN(PIN_PA24, 1, 1) -+#define PIN_PA24__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA24, 2, 1) -+#define PIN_PA24__ISC_HSYNC PINMUX_PIN(PIN_PA24, 3, 1) -+#define PIN_PA24__A10 PINMUX_PIN(PIN_PA24, 4, 1) -+#define PIN_PA24__FLEXCOM0_IO5 PINMUX_PIN(PIN_PA24, 5, 1) -+#define PIN_PA25 25 -+#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) -+#define PIN_PA25__G0_125CK PINMUX_PIN(PIN_PA25, 1, 1) -+#define PIN_PA25__FLEXCOM5_IO4 PINMUX_PIN(PIN_PA25, 2, 1) -+#define PIN_PA25__ISC_VSYNC PINMUX_PIN(PIN_PA25, 3, 1) -+#define PIN_PA25__A11 PINMUX_PIN(PIN_PA25, 4, 1) -+#define PIN_PA25__FLEXCOM0_IO6 PINMUX_PIN(PIN_PA25, 5, 1) -+#define PIN_PA25__FLEXCOM7_IO0 PINMUX_PIN(PIN_PA25, 6, 3) -+#define PIN_PA26 26 -+#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) -+#define PIN_PA26__G0_TX2 PINMUX_PIN(PIN_PA26, 1, 1) -+#define PIN_PA26__FLEXCOM5_IO2 PINMUX_PIN(PIN_PA26, 2, 1) -+#define PIN_PA26__ISC_FIELD PINMUX_PIN(PIN_PA26, 3, 1) -+#define PIN_PA26__A12 PINMUX_PIN(PIN_PA26, 4, 1) -+#define PIN_PA26__TF0 PINMUX_PIN(PIN_PA26, 5, 1) -+#define PIN_PA26__FLEXCOM7_IO1 PINMUX_PIN(PIN_PA26, 6, 3) -+#define PIN_PA27 27 -+#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) -+#define PIN_PA27__G0_TX3 PINMUX_PIN(PIN_PA27, 1, 1) -+#define PIN_PA27__FLEXCOM5_IO3 PINMUX_PIN(PIN_PA27, 2, 1) -+#define PIN_PA27__ISC_PCK PINMUX_PIN(PIN_PA27, 3, 1) -+#define PIN_PA27__A13 PINMUX_PIN(PIN_PA27, 4, 1) -+#define PIN_PA27__TK0 PINMUX_PIN(PIN_PA27, 5, 1) -+#define PIN_PA27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA27, 6, 3) -+#define PIN_PA28 28 -+#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) -+#define PIN_PA28__G0_RX2 PINMUX_PIN(PIN_PA28, 1, 1) -+#define PIN_PA28__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA28, 2, 1) -+#define PIN_PA28__ISC_D8 PINMUX_PIN(PIN_PA28, 3, 1) -+#define PIN_PA28__A14 PINMUX_PIN(PIN_PA28, 4, 1) -+#define PIN_PA28__RD0 PINMUX_PIN(PIN_PA28, 5, 1) -+#define PIN_PA28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA28, 6, 3) -+#define PIN_PA29 29 -+#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) -+#define PIN_PA29__G0_RX3 PINMUX_PIN(PIN_PA29, 1, 1) -+#define PIN_PA29__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA29, 2, 1) -+#define PIN_PA29__ISC_D9 PINMUX_PIN(PIN_PA29, 3, 1) -+#define PIN_PA29__A15 PINMUX_PIN(PIN_PA29, 4, 1) -+#define PIN_PA29__RF0 PINMUX_PIN(PIN_PA29, 5, 1) -+#define PIN_PA29__FLEXCOM9_IO0 PINMUX_PIN(PIN_PA29, 6, 3) -+#define PIN_PA30 30 -+#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) -+#define PIN_PA30__G0_RXCK PINMUX_PIN(PIN_PA30, 1, 1) -+#define PIN_PA30__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA30, 2, 1) -+#define PIN_PA30__ISC_D10 PINMUX_PIN(PIN_PA30, 3, 1) -+#define PIN_PA30__A16 PINMUX_PIN(PIN_PA30, 4, 1) -+#define PIN_PA30__RK0 PINMUX_PIN(PIN_PA30, 5, 1) -+#define PIN_PA30__FLEXCOM9_IO1 PINMUX_PIN(PIN_PA30, 6, 3) -+#define PIN_PA31 31 -+#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) -+#define PIN_PA31__G0_TXER PINMUX_PIN(PIN_PA31, 1, 1) -+#define PIN_PA31__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA31, 2, 1) -+#define PIN_PA31__ISC_D11 PINMUX_PIN(PIN_PA31, 3, 1) -+#define PIN_PA31__A17 PINMUX_PIN(PIN_PA31, 4, 1) -+#define PIN_PA31__TD0 PINMUX_PIN(PIN_PA31, 5, 1) -+#define PIN_PA31__FLEXCOM10_IO0 PINMUX_PIN(PIN_PA31, 6, 3) -+#define PIN_PB0 32 -+#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) -+#define PIN_PB0__G0_COL PINMUX_PIN(PIN_PB0, 1, 1) -+#define PIN_PB0__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB0, 2, 2) -+#define PIN_PB0__EXT_IRQ0 PINMUX_PIN(PIN_PB0, 3, 1) -+#define PIN_PB0__A18 PINMUX_PIN(PIN_PB0, 4, 1) -+#define PIN_PB0__SPDIF_RX PINMUX_PIN(PIN_PB0, 5, 2) -+#define PIN_PB0__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB0, 6, 3) -+#define PIN_PB1 33 -+#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) -+#define PIN_PB1__G0_CRS PINMUX_PIN(PIN_PB1, 1, 1) -+#define PIN_PB1__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB1, 2, 2) -+#define PIN_PB1__EXT_IRQ1 PINMUX_PIN(PIN_PB1, 3, 1) -+#define PIN_PB1__A19 PINMUX_PIN(PIN_PB1, 4, 1) -+#define PIN_PB1__SPDIF_TX PINMUX_PIN(PIN_PB1, 5, 2) -+#define PIN_PB1__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB1, 6, 3) -+#define PIN_PB2 34 -+#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) -+#define PIN_PB2__G0_TSUCOMP PINMUX_PIN(PIN_PB2, 1, 1) -+#define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1) -+#define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1) -+#define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1) -+#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3) -+#define PIN_PB3 35 -+#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) -+#define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1) -+#define PIN_PB3__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB3, 2, 1) -+#define PIN_PB3__PCK2 PINMUX_PIN(PIN_PB3, 3, 2) -+#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 4, 1) -+#define PIN_PB4 36 -+#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) -+#define PIN_PB4__TF1 PINMUX_PIN(PIN_PB4, 1, 1) -+#define PIN_PB4__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB4, 2, 1) -+#define PIN_PB4__PCK3 PINMUX_PIN(PIN_PB4, 3, 2) -+#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 4, 1) -+#define PIN_PB5 37 -+#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) -+#define PIN_PB5__TK1 PINMUX_PIN(PIN_PB5, 1, 1) -+#define PIN_PB5__FLEXCOM11_IO2 PINMUX_PIN(PIN_PB5, 2, 1) -+#define PIN_PB5__PCK4 PINMUX_PIN(PIN_PB5, 3, 2) -+#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 4, 1) -+#define PIN_PB6 38 -+#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) -+#define PIN_PB6__RK1 PINMUX_PIN(PIN_PB6, 1, 1) -+#define PIN_PB6__FLEXCOM11_IO3 PINMUX_PIN(PIN_PB6, 2, 1) -+#define PIN_PB6__PCK5 PINMUX_PIN(PIN_PB6, 3, 2) -+#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 4, 1) -+#define PIN_PB7 39 -+#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) -+#define PIN_PB7__TD1 PINMUX_PIN(PIN_PB7, 1, 1) -+#define PIN_PB7__FLEXCOM11_IO4 PINMUX_PIN(PIN_PB7, 2, 1) -+#define PIN_PB7__FLEXCOM3_IO5 PINMUX_PIN(PIN_PB7, 3, 2) -+#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 4, 1) -+#define PIN_PB8 40 -+#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) -+#define PIN_PB8__RD1 PINMUX_PIN(PIN_PB8, 1, 1) -+#define PIN_PB8__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB8, 2, 1) -+#define PIN_PB8__FLEXCOM3_IO6 PINMUX_PIN(PIN_PB8, 3, 2) -+#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 4, 1) -+#define PIN_PB9 41 -+#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) -+#define PIN_PB9__QSPI0_IO3 PINMUX_PIN(PIN_PB9, 1, 1) -+#define PIN_PB9__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB9, 2, 1) -+#define PIN_PB9__PDMC0_CLK PINMUX_PIN(PIN_PB9, 3, 1) -+#define PIN_PB9__NCS3_NANDCS PINMUX_PIN(PIN_PB9, 4, 1) -+#define PIN_PB9__PWML0 PINMUX_PIN(PIN_PB9, 5, 2) -+#define PIN_PB10 42 -+#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) -+#define PIN_PB10__QSPI0_IO2 PINMUX_PIN(PIN_PB10, 1, 1) -+#define PIN_PB10__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB10, 2, 1) -+#define PIN_PB10__PDMC0_DS0 PINMUX_PIN(PIN_PB10, 3, 1) -+#define PIN_PB10__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PB10, 4, 1) -+#define PIN_PB10__PWMH0 PINMUX_PIN(PIN_PB10, 5, 2) -+#define PIN_PB11 43 -+#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) -+#define PIN_PB11__QSPI0_IO1 PINMUX_PIN(PIN_PB11, 1, 1) -+#define PIN_PB11__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB11, 2, 1) -+#define PIN_PB11__PDMC0_DS1 PINMUX_PIN(PIN_PB11, 3, 1) -+#define PIN_PB11__NRD_NANDOE PINMUX_PIN(PIN_PB11, 4, 1) -+#define PIN_PB11__PWML1 PINMUX_PIN(PIN_PB11, 5, 2) -+#define PIN_PB12 44 -+#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) -+#define PIN_PB12__QSPI0_IO0 PINMUX_PIN(PIN_PB12, 1, 1) -+#define PIN_PB12__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB12, 2, 1) -+#define PIN_PB12__FLEXCOM6_IO5 PINMUX_PIN(PIN_PB12, 3, 1) -+#define PIN_PB12__A21_NANDALE PINMUX_PIN(PIN_PB12, 4, 1) -+#define PIN_PB12__PWMH1 PINMUX_PIN(PIN_PB12, 5, 2) -+#define PIN_PB13 45 -+#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) -+#define PIN_PB13__QSPI0_CS PINMUX_PIN(PIN_PB13, 1, 1) -+#define PIN_PB13__FLEXCOM9_IO0 PINMUX_PIN(PIN_PB13, 2, 1) -+#define PIN_PB13__FLEXCOM6_IO6 PINMUX_PIN(PIN_PB13, 3, 1) -+#define PIN_PB13__A22_NANDCLE PINMUX_PIN(PIN_PB13, 4, 1) -+#define PIN_PB13__PWML2 PINMUX_PIN(PIN_PB13, 5, 2) -+#define PIN_PB14 46 -+#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) -+#define PIN_PB14__QSPI0_SCK PINMUX_PIN(PIN_PB14, 1, 1) -+#define PIN_PB14__FLEXCOM9_IO1 PINMUX_PIN(PIN_PB14, 2, 1) -+#define PIN_PB14__D0 PINMUX_PIN(PIN_PB14, 4, 1) -+#define PIN_PB14__PWMH2 PINMUX_PIN(PIN_PB14, 5, 2) -+#define PIN_PB15 47 -+#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) -+#define PIN_PB15__QSPI0_SCKN PINMUX_PIN(PIN_PB15, 1, 1) -+#define PIN_PB15__FLEXCOM9_IO2 PINMUX_PIN(PIN_PB15, 2, 1) -+#define PIN_PB15__D1 PINMUX_PIN(PIN_PB15, 4, 1) -+#define PIN_PB15__PWML3 PINMUX_PIN(PIN_PB15, 5, 2) -+#define PIN_PB16 48 -+#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) -+#define PIN_PB16__QSPI0_IO4 PINMUX_PIN(PIN_PB16, 1, 1) -+#define PIN_PB16__FLEXCOM9_IO3 PINMUX_PIN(PIN_PB16, 2, 1) -+#define PIN_PB16__PCK0 PINMUX_PIN(PIN_PB16, 3, 1) -+#define PIN_PB16__D2 PINMUX_PIN(PIN_PB16, 4, 1) -+#define PIN_PB16__PWMH3 PINMUX_PIN(PIN_PB16, 5, 2) -+#define PIN_PB16__EXT_IRQ0 PINMUX_PIN(PIN_PB16, 6, 2) -+#define PIN_PB17 49 -+#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) -+#define PIN_PB17__QSPI0_IO5 PINMUX_PIN(PIN_PB17, 1, 1) -+#define PIN_PB17__FLEXCOM9_IO4 PINMUX_PIN(PIN_PB17, 2, 1) -+#define PIN_PB17__PCK1 PINMUX_PIN(PIN_PB17, 3, 1) -+#define PIN_PB17__D3 PINMUX_PIN(PIN_PB17, 4, 1) -+#define PIN_PB17__PWMEXTRG0 PINMUX_PIN(PIN_PB17, 5, 2) -+#define PIN_PB17__EXT_IRQ1 PINMUX_PIN(PIN_PB17, 6, 2) -+#define PIN_PB18 50 -+#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) -+#define PIN_PB18__QSPI0_IO6 PINMUX_PIN(PIN_PB18, 1, 1) -+#define PIN_PB18__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB18, 2, 1) -+#define PIN_PB18__PCK2 PINMUX_PIN(PIN_PB18, 3, 1) -+#define PIN_PB18__D4 PINMUX_PIN(PIN_PB18, 4, 1) -+#define PIN_PB18__PWMEXTRG1 PINMUX_PIN(PIN_PB18, 5, 2) -+#define PIN_PB19 51 -+#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) -+#define PIN_PB19__QSPI0_IO7 PINMUX_PIN(PIN_PB19, 1, 1) -+#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 2, 1) -+#define PIN_PB19__PCK3 PINMUX_PIN(PIN_PB19, 3, 1) -+#define PIN_PB19__D5 PINMUX_PIN(PIN_PB19, 4, 1) -+#define PIN_PB19__PWMFI0 PINMUX_PIN(PIN_PB19, 5, 2) -+#define PIN_PB20 52 -+#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) -+#define PIN_PB20__QSPI0_DQS PINMUX_PIN(PIN_PB20, 1, 1) -+#define PIN_PB20__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB20, 2, 1) -+#define PIN_PB20__D6 PINMUX_PIN(PIN_PB20, 4, 1) -+#define PIN_PB20__PWMFI1 PINMUX_PIN(PIN_PB20, 5, 2) -+#define PIN_PB21 53 -+#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) -+#define PIN_PB21__QSPI0_INT PINMUX_PIN(PIN_PB21, 1, 1) -+#define PIN_PB21__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB21, 2, 1) -+#define PIN_PB21__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB21, 3, 1) -+#define PIN_PB21__D7 PINMUX_PIN(PIN_PB21, 4, 1) -+#define PIN_PB22 54 -+#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) -+#define PIN_PB22__QSPI1_IO3 PINMUX_PIN(PIN_PB22, 1, 1) -+#define PIN_PB22__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB22, 2, 1) -+#define PIN_PB22__FLEXCOM9_IO6 PINMUX_PIN(PIN_PB22, 3, 1) -+#define PIN_PB22__NANDRDY PINMUX_PIN(PIN_PB22, 4, 1) -+#define PIN_PB23 55 -+#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) -+#define PIN_PB23__QSPI1_IO2 PINMUX_PIN(PIN_PB23, 1, 1) -+#define PIN_PB23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB23, 2, 1) -+#define PIN_PB23__I2SMCC0_CK PINMUX_PIN(PIN_PB23, 3, 1) -+#define PIN_PB23__PCK4 PINMUX_PIN(PIN_PB23, 6, 1) -+#define PIN_PB24 56 -+#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) -+#define PIN_PB24__QSPI1_IO1 PINMUX_PIN(PIN_PB24, 1, 1) -+#define PIN_PB24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB24, 2, 1) -+#define PIN_PB24__I2SMCC0_WS PINMUX_PIN(PIN_PB24, 3, 1) -+#define PIN_PB24__PCK5 PINMUX_PIN(PIN_PB24, 6, 1) -+#define PIN_PB25 57 -+#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) -+#define PIN_PB25__QSPI1_IO0 PINMUX_PIN(PIN_PB25, 1, 1) -+#define PIN_PB25__FLEXCOM7_IO2 PINMUX_PIN(PIN_PB25, 2, 1) -+#define PIN_PB25__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PB25, 3, 1) -+#define PIN_PB25__PCK6 PINMUX_PIN(PIN_PB25, 6, 1) -+#define PIN_PB26 58 -+#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) -+#define PIN_PB26__QSPI1_CS PINMUX_PIN(PIN_PB26, 1, 1) -+#define PIN_PB26__FLEXCOM7_IO3 PINMUX_PIN(PIN_PB26, 2, 1) -+#define PIN_PB26__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB26, 3, 1) -+#define PIN_PB26__PWMEXTRG0 PINMUX_PIN(PIN_PB26, 5, 1) -+#define PIN_PB26__PCK7 PINMUX_PIN(PIN_PB26, 6, 1) -+#define PIN_PB27 59 -+#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) -+#define PIN_PB27__QSPI1_SCK PINMUX_PIN(PIN_PB27, 1, 1) -+#define PIN_PB27__FLEXCOM7_IO4 PINMUX_PIN(PIN_PB27, 2, 1) -+#define PIN_PB27__I2SMCC0_MCK PINMUX_PIN(PIN_PB27, 3, 1) -+#define PIN_PB27__PWMEXTRG1 PINMUX_PIN(PIN_PB27, 5, 1) -+#define PIN_PB28 60 -+#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) -+#define PIN_PB28__SDMMC1_RSTN PINMUX_PIN(PIN_PB28, 1, 1) -+#define PIN_PB28__ADTRG PINMUX_PIN(PIN_PB28, 2, 2) -+#define PIN_PB28__PWMFI0 PINMUX_PIN(PIN_PB28, 5, 1) -+#define PIN_PB28__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB28, 6, 4) -+#define PIN_PB29 61 -+#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) -+#define PIN_PB29__SDMMC1_CMD PINMUX_PIN(PIN_PB29, 1, 1) -+#define PIN_PB29__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB29, 2, 2) -+#define PIN_PB29__FLEXCOM0_IO5 PINMUX_PIN(PIN_PB29, 3, 2) -+#define PIN_PB29__TIOA3 PINMUX_PIN(PIN_PB29, 4, 2) -+#define PIN_PB29__PWMFI1 PINMUX_PIN(PIN_PB29, 5, 1) -+#define PIN_PB29__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB29, 6, 4) -+#define PIN_PB30 62 -+#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) -+#define PIN_PB30__SDMMC1_CK PINMUX_PIN(PIN_PB30, 1, 1) -+#define PIN_PB30__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB30, 2, 2) -+#define PIN_PB30__FLEXCOM0_IO6 PINMUX_PIN(PIN_PB30, 3, 2) -+#define PIN_PB30__TIOB3 PINMUX_PIN(PIN_PB30, 4, 1) -+#define PIN_PB30__PWMH0 PINMUX_PIN(PIN_PB30, 5, 1) -+#define PIN_PB30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB30, 6, 4) -+#define PIN_PB31 63 -+#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) -+#define PIN_PB31__SDMMC1_DAT0 PINMUX_PIN(PIN_PB31, 1, 1) -+#define PIN_PB31__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB31, 2, 2) -+#define PIN_PB31__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB31, 3, 2) -+#define PIN_PB31__TCLK3 PINMUX_PIN(PIN_PB31, 4, 1) -+#define PIN_PB31__PWML0 PINMUX_PIN(PIN_PB31, 5, 1) -+#define PIN_PB31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB31, 6, 4) -+#define PIN_PC0 64 -+#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) -+#define PIN_PC0__SDMMC1_DAT1 PINMUX_PIN(PIN_PC0, 1, 1) -+#define PIN_PC0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC0, 2, 2) -+#define PIN_PC0__TIOA4 PINMUX_PIN(PIN_PC0, 4, 1) -+#define PIN_PC0__PWML1 PINMUX_PIN(PIN_PC0, 5, 1) -+#define PIN_PC0__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC0, 6, 4) -+#define PIN_PC1 65 -+#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) -+#define PIN_PC1__SDMMC1_DAT2 PINMUX_PIN(PIN_PC1, 1, 1) -+#define PIN_PC1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC1, 2, 2) -+#define PIN_PC1__TIOB4 PINMUX_PIN(PIN_PC1, 4, 1) -+#define PIN_PC1__PWMH1 PINMUX_PIN(PIN_PC1, 5, 1) -+#define PIN_PC1__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC1, 6, 4) -+#define PIN_PC2 66 -+#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) -+#define PIN_PC2__SDMMC1_DAT3 PINMUX_PIN(PIN_PC2, 1, 1) -+#define PIN_PC2__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC2, 2, 2) -+#define PIN_PC2__TCLK4 PINMUX_PIN(PIN_PC2, 4, 1) -+#define PIN_PC2__PWML2 PINMUX_PIN(PIN_PC2, 5, 1) -+#define PIN_PC2__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC2, 6, 4) -+#define PIN_PC3 67 -+#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) -+#define PIN_PC3__SDMMC1_WP PINMUX_PIN(PIN_PC3, 1, 1) -+#define PIN_PC3__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC3, 2, 2) -+#define PIN_PC3__TIOA5 PINMUX_PIN(PIN_PC3, 4, 1) -+#define PIN_PC3__PWMH2 PINMUX_PIN(PIN_PC3, 5, 1) -+#define PIN_PC3__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC3, 6, 4) -+#define PIN_PC4 68 -+#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) -+#define PIN_PC4__SDMMC1_CD PINMUX_PIN(PIN_PC4, 1, 1) -+#define PIN_PC4__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC4, 2, 2) -+#define PIN_PC4__FLEXCOM9_IO6 PINMUX_PIN(PIN_PC4, 3, 2) -+#define PIN_PC4__TIOB5 PINMUX_PIN(PIN_PC4, 4, 1) -+#define PIN_PC4__PWML3 PINMUX_PIN(PIN_PC4, 5, 1) -+#define PIN_PC4__FLEXCOM11_IO0 PINMUX_PIN(PIN_PC4, 6, 4) -+#define PIN_PC5 69 -+#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) -+#define PIN_PC5__SDMMC1_1V8SEL PINMUX_PIN(PIN_PC5, 1, 1) -+#define PIN_PC5__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC5, 2, 2) -+#define PIN_PC5__FLEXCOM6_IO5 PINMUX_PIN(PIN_PC5, 3, 2) -+#define PIN_PC5__TCLK5 PINMUX_PIN(PIN_PC5, 4, 1) -+#define PIN_PC5__PWMH3 PINMUX_PIN(PIN_PC5, 5, 1) -+#define PIN_PC5__FLEXCOM11_IO1 PINMUX_PIN(PIN_PC5, 6, 4) -+#define PIN_PC6 70 -+#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) -+#define PIN_PC6__FLEXCOM4_IO4 PINMUX_PIN(PIN_PC6, 2, 2) -+#define PIN_PC6__FLEXCOM6_IO6 PINMUX_PIN(PIN_PC6, 3, 2) -+#define PIN_PC7 71 -+#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) -+#define PIN_PC7__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC7, 1, 1) -+#define PIN_PC7__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC7, 2, 2) -+#define PIN_PC8 72 -+#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) -+#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1) -+#define PIN_PC8__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC8, 2, 2) -+#define PIN_PC9 73 -+#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) -+#define PIN_PC9__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC9, 1, 1) -+#define PIN_PC9__FLEXCOM7_IO2 PINMUX_PIN(PIN_PC9, 2, 2) -+#define PIN_PC9__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC9, 6, 4) -+#define PIN_PC10 74 -+#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) -+#define PIN_PC10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC10, 1, 1) -+#define PIN_PC10__FLEXCOM7_IO3 PINMUX_PIN(PIN_PC10, 2, 2) -+#define PIN_PC10__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC10, 6, 4) -+#define PIN_PC11 75 -+#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) -+#define PIN_PC11__I2SMCC1_CK PINMUX_PIN(PIN_PC11, 1, 1) -+#define PIN_PC11__FLEXCOM7_IO4 PINMUX_PIN(PIN_PC11, 2, 2) -+#define PIN_PC11__FLEXCOM2_IO0 PINMUX_PIN(PIN_PC11, 6, 4) -+#define PIN_PC12 76 -+#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) -+#define PIN_PC12__I2SMCC1_WS PINMUX_PIN(PIN_PC12, 1, 1) -+#define PIN_PC12__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC12, 2, 2) -+#define PIN_PC12__FLEXCOM2_IO1 PINMUX_PIN(PIN_PC12, 6, 4) -+#define PIN_PC13 77 -+#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) -+#define PIN_PC13__I2SMCC1_MCK PINMUX_PIN(PIN_PC13, 1, 1) -+#define PIN_PC13__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC13, 2, 2) -+#define PIN_PC13__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC13, 6, 4) -+#define PIN_PC14 78 -+#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) -+#define PIN_PC14__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC14, 1, 1) -+#define PIN_PC14__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC14, 2, 2) -+#define PIN_PC14__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC14, 6, 4) -+#define PIN_PC15 79 -+#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) -+#define PIN_PC15__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC15, 1, 1) -+#define PIN_PC15__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC15, 2, 2) -+#define PIN_PC15__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC15, 6, 4) -+#define PIN_PC16 80 -+#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) -+#define PIN_PC16__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC16, 1, 1) -+#define PIN_PC16__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC16, 2, 2) -+#define PIN_PC16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC16, 6, 4) -+#define PIN_PC17 81 -+#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) -+#define PIN_PC17__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC17, 1, 1) -+#define PIN_PC17__EXT_IRQ0 PINMUX_PIN(PIN_PC17, 2, 3) -+#define PIN_PC17__FLEXCOM5_IO0 PINMUX_PIN(PIN_PC17, 6, 4) -+#define PIN_PC18 82 -+#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) -+#define PIN_PC18__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC18, 1, 1) -+#define PIN_PC18__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC18, 2, 2) -+#define PIN_PC18__FLEXCOM5_IO1 PINMUX_PIN(PIN_PC18, 6, 4) -+#define PIN_PC19 83 -+#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) -+#define PIN_PC19__I2SMCC1_DIN1 PINMUX_PIN(PIN_PC19, 1, 1) -+#define PIN_PC19__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC19, 2, 2) -+#define PIN_PC19__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC19, 6, 4) -+#define PIN_PC20 84 -+#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) -+#define PIN_PC20__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC20, 1, 1) -+#define PIN_PC20__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC20, 2, 2) -+#define PIN_PC20__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC20, 6, 4) -+#define PIN_PC21 85 -+#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) -+#define PIN_PC21__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC21, 1, 1) -+#define PIN_PC21__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC21, 2, 2) -+#define PIN_PC21__D3 PINMUX_PIN(PIN_PC21, 4, 2) -+#define PIN_PC21__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC21, 6, 5) -+#define PIN_PC22 86 -+#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) -+#define PIN_PC22__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC22, 1, 1) -+#define PIN_PC22__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC22, 2, 2) -+#define PIN_PC22__D4 PINMUX_PIN(PIN_PC22, 4, 2) -+#define PIN_PC22__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC22, 6, 5) -+#define PIN_PC23 87 -+#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) -+#define PIN_PC23__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC23, 1, 1) -+#define PIN_PC23__FLEXCOM0_IO5 PINMUX_PIN(PIN_PC23, 2, 3) -+#define PIN_PC23__D5 PINMUX_PIN(PIN_PC23, 4, 2) -+#define PIN_PC23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC23, 6, 5) -+#define PIN_PC24 88 -+#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) -+#define PIN_PC24__FLEXCOM0_IO6 PINMUX_PIN(PIN_PC24, 2, 3) -+#define PIN_PC24__EXT_IRQ1 PINMUX_PIN(PIN_PC24, 3, 3) -+#define PIN_PC24__D6 PINMUX_PIN(PIN_PC24, 4, 2) -+#define PIN_PC24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC24, 6, 5) -+#define PIN_PC25 89 -+#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) -+#define PIN_PC25__NTRST PINMUX_PIN(PIN_PC25, 1, 1) -+#define PIN_PC26 90 -+#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) -+#define PIN_PC26__TCK_SWCLK PINMUX_PIN(PIN_PC26, 1, 1) -+#define PIN_PC27 91 -+#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) -+#define PIN_PC27__TMS_SWDIO PINMUX_PIN(PIN_PC27, 1, 1) -+#define PIN_PC28 92 -+#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) -+#define PIN_PC28__TDI PINMUX_PIN(PIN_PC28, 1, 1) -+#define PIN_PC29 93 -+#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) -+#define PIN_PC29__TDO PINMUX_PIN(PIN_PC29, 1, 1) -+#define PIN_PC30 94 -+#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) -+#define PIN_PC30__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC30, 2, 2) -+#define PIN_PC31 95 -+#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) -+#define PIN_PC31__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC31, 2, 2) -+#define PIN_PD0 96 -+#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) -+#define PIN_PD0__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD0, 2, 2) -+#define PIN_PD1 97 -+#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) -+#define PIN_PD1__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD1, 2, 2) -+#define PIN_PD2 98 -+#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) -+#define PIN_PD2__SDMMC2_RSTN PINMUX_PIN(PIN_PD2, 1, 1) -+#define PIN_PD2__PCK0 PINMUX_PIN(PIN_PD2, 2, 2) -+#define PIN_PD2__CANTX4 PINMUX_PIN(PIN_PD2, 3, 1) -+#define PIN_PD2__D7 PINMUX_PIN(PIN_PD2, 4, 2) -+#define PIN_PD2__TIOA0 PINMUX_PIN(PIN_PD2, 5, 2) -+#define PIN_PD2__FLEXCOM8_IO0 PINMUX_PIN(PIN_PD2, 6, 5) -+#define PIN_PD3 99 -+#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) -+#define PIN_PD3__SDMMC2_CMD PINMUX_PIN(PIN_PD3, 1, 1) -+#define PIN_PD3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD3, 2, 2) -+#define PIN_PD3__CANRX4 PINMUX_PIN(PIN_PD3, 3, 1) -+#define PIN_PD3__NANDRDY PINMUX_PIN(PIN_PD3, 4, 2) -+#define PIN_PD3__TIOB0 PINMUX_PIN(PIN_PD3, 5, 2) -+#define PIN_PD3__FLEXCOM8_IO1 PINMUX_PIN(PIN_PD3, 6, 5) -+#define PIN_PD4 100 -+#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) -+#define PIN_PD4__SDMMC2_CK PINMUX_PIN(PIN_PD4, 1, 1) -+#define PIN_PD4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD4, 2, 2) -+#define PIN_PD4__CANTX5 PINMUX_PIN(PIN_PD4, 3, 1) -+#define PIN_PD4__NCS3_NANDCS PINMUX_PIN(PIN_PD4, 4, 2) -+#define PIN_PD4__TCLK0 PINMUX_PIN(PIN_PD4, 5, 2) -+#define PIN_PD4__FLEXCOM9_IO0 PINMUX_PIN(PIN_PD4, 6, 5) -+#define PIN_PD5 101 -+#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) -+#define PIN_PD5__SDMMC2_DAT0 PINMUX_PIN(PIN_PD5, 1, 1) -+#define PIN_PD5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PD5, 2, 2) -+#define PIN_PD5__CANRX5 PINMUX_PIN(PIN_PD5, 3, 1) -+#define PIN_PD5__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PD5, 4, 2) -+#define PIN_PD5__TIOA1 PINMUX_PIN(PIN_PD5, 5, 2) -+#define PIN_PD5__FLEXCOM9_IO1 PINMUX_PIN(PIN_PD5, 6, 5) -+#define PIN_PD6 102 -+#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) -+#define PIN_PD6__SDMMC2_DAT1 PINMUX_PIN(PIN_PD6, 1, 1) -+#define PIN_PD6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PD6, 2, 2) -+#define PIN_PD6__SPDIF_RX PINMUX_PIN(PIN_PD6, 3, 3) -+#define PIN_PD6__NRD_NANDOE PINMUX_PIN(PIN_PD6, 4, 2) -+#define PIN_PD6__TIOB1 PINMUX_PIN(PIN_PD6, 5, 2) -+#define PIN_PD6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PD6, 6, 5) -+#define PIN_PD7 103 -+#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) -+#define PIN_PD7__SDMMC2_DAT2 PINMUX_PIN(PIN_PD7, 1, 1) -+#define PIN_PD7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PD7, 2, 2) -+#define PIN_PD7__SPDIF_TX PINMUX_PIN(PIN_PD7, 2, 2) -+#define PIN_PD7__A21_NANDALE PINMUX_PIN(PIN_PD7, 4, 2) -+#define PIN_PD7__TCLK1 PINMUX_PIN(PIN_PD7, 5, 2) -+#define PIN_PD7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PD7, 6, 5) -+#define PIN_PD8 104 -+#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) -+#define PIN_PD8__SDMMC2_DAT3 PINMUX_PIN(PIN_PD8, 1, 1) -+#define PIN_PD8__I2SMCC0_DIN0 PINMUX_PIN(PIN_PD8, 3, 1) -+#define PIN_PD8__A11_NANDCLE PINMUX_PIN(PIN_PD8, 4, 2) -+#define PIN_PD8__TIOA2 PINMUX_PIN(PIN_PD8, 5, 2) -+#define PIN_PD8__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD8, 6, 5) -+#define PIN_PD9 105 -+#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) -+#define PIN_PD9__SDMMC2_WP PINMUX_PIN(PIN_PD9, 1, 1) -+#define PIN_PD9__I2SMCC0_DIN1 PINMUX_PIN(PIN_PD9, 3, 2) -+#define PIN_PD9__D0 PINMUX_PIN(PIN_PD9, 4, 2) -+#define PIN_PD9__TIOB2 PINMUX_PIN(PIN_PD9, 5, 2) -+#define PIN_PD9__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD9, 6, 5) -+#define PIN_PD10 106 -+#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) -+#define PIN_PD10__SDMMC2_CD PINMUX_PIN(PIN_PD10, 1, 1) -+#define PIN_PD10__PCK6 PINMUX_PIN(PIN_PD10, 2, 2) -+#define PIN_PD10__I2SMCC0_DIN2 PINMUX_PIN(PIN_PD10, 3, 2) -+#define PIN_PD10__D1 PINMUX_PIN(PIN_PD10, 4, 2) -+#define PIN_PD10__TCLK2 PINMUX_PIN(PIN_PD10, 5, 2) -+#define PIN_PD10__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD10, 6, 3) -+#define PIN_PD11 107 -+#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) -+#define PIN_PD11__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD11, 1, 1) -+#define PIN_PD11__PCK7 PINMUX_PIN(PIN_PD11, 2, 2) -+#define PIN_PD11__I2SMCC0_DIN3 PINMUX_PIN(PIN_PD11, 3, 2) -+#define PIN_PD11__D2 PINMUX_PIN(PIN_PD11, 4, 2) -+#define PIN_PD11__TIOA3 PINMUX_PIN(PIN_PD11, 5, 2) -+#define PIN_PD11__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD11, 6, 3) -+#define PIN_PD12 108 -+#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) -+#define PIN_PD12__PCK1 PINMUX_PIN(PIN_PD12, 1, 2) -+#define PIN_PD12__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD12, 2, 2) -+#define PIN_PD12__CANTX0 PINMUX_PIN(PIN_PD12, 4, 2) -+#define PIN_PD12__TIOB3 PINMUX_PIN(PIN_PD12, 5, 2) -+#define PIN_PD13 109 -+#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) -+#define PIN_PD13__I2SMCC0_CK PINMUX_PIN(PIN_PD13, 1, 2) -+#define PIN_PD13__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD13, 2, 2) -+#define PIN_PD13__PWML0 PINMUX_PIN(PIN_PD13, 3, 4) -+#define PIN_PD13__CANRX0 PINMUX_PIN(PIN_PD13, 4, 2) -+#define PIN_PD13__TCLK3 PINMUX_PIN(PIN_PD13, 5, 2) -+#define PIN_PD14 110 -+#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) -+#define PIN_PD14__I2SMCC0_MCK PINMUX_PIN(PIN_PD14, 1, 2) -+#define PIN_PD14__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD14, 2, 2) -+#define PIN_PD14__PWMH0 PINMUX_PIN(PIN_PD14, 3, 4) -+#define PIN_PD14__CANTX1 PINMUX_PIN(PIN_PD14, 4, 2) -+#define PIN_PD14__TIOA4 PINMUX_PIN(PIN_PD14, 5, 2) -+#define PIN_PD14__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD14, 6, 5) -+#define PIN_PD15 111 -+#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) -+#define PIN_PD15__I2SMCC0_WS PINMUX_PIN(PIN_PD15, 1, 2) -+#define PIN_PD15__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD15, 2, 2) -+#define PIN_PD15__PWML1 PINMUX_PIN(PIN_PD15, 3, 4) -+#define PIN_PD15__CANRX1 PINMUX_PIN(PIN_PD15, 4, 2) -+#define PIN_PD15__TIOB4 PINMUX_PIN(PIN_PD15, 5, 2) -+#define PIN_PD15__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD15, 6, 5) -+#define PIN_PD16 112 -+#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) -+#define PIN_PD16__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PD16, 1, 2) -+#define PIN_PD16__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD16, 2, 2) -+#define PIN_PD16__PWMH1 PINMUX_PIN(PIN_PD16, 3, 4) -+#define PIN_PD16__CANTX2 PINMUX_PIN(PIN_PD16, 4, 2) -+#define PIN_PD16__TCLK4 PINMUX_PIN(PIN_PD16, 5, 2) -+#define PIN_PD16__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD16, 6, 5) -+#define PIN_PD17 113 -+#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) -+#define PIN_PD17__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PD17, 1, 2) -+#define PIN_PD17__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD17, 2, 2) -+#define PIN_PD17__PWML2 PINMUX_PIN(PIN_PD17, 3, 4) -+#define PIN_PD17__CANRX2 PINMUX_PIN(PIN_PD17, 4, 2) -+#define PIN_PD17__TIOA5 PINMUX_PIN(PIN_PD17, 5, 2) -+#define PIN_PD17__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD17, 6, 5) -+#define PIN_PD18 114 -+#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) -+#define PIN_PD18__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PD18, 1, 2) -+#define PIN_PD18__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD18, 2, 2) -+#define PIN_PD18__PWMH2 PINMUX_PIN(PIN_PD18, 3, 4) -+#define PIN_PD18__CANTX3 PINMUX_PIN(PIN_PD18, 4, 2) -+#define PIN_PD18__TIOB5 PINMUX_PIN(PIN_PD18, 5, 2) -+#define PIN_PD18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD18, 6, 5) -+#define PIN_PD19 115 -+#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) -+#define PIN_PD19__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PD19, 1, 2) -+#define PIN_PD19__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD19, 2, 2) -+#define PIN_PD19__PWML3 PINMUX_PIN(PIN_PD19, 3, 4) -+#define PIN_PD19__CANRX3 PINMUX_PIN(PIN_PD19, 4, 2) -+#define PIN_PD19__TCLK5 PINMUX_PIN(PIN_PD19, 5, 2) -+#define PIN_PD19__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD19, 6, 5) -+#define PIN_PD20 116 -+#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) -+#define PIN_PD20__PCK0 PINMUX_PIN(PIN_PD20, 1, 3) -+#define PIN_PD20__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD20, 2, 2) -+#define PIN_PD20__PWMH3 PINMUX_PIN(PIN_PD20, 3, 4) -+#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 5, 2) -+#define PIN_PD20__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD20, 6, 5) -+#define PIN_PD21 117 -+#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) -+#define PIN_PD21__PCK1 PINMUX_PIN(PIN_PD21, 1, 3) -+#define PIN_PD21__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD21, 2, 2) -+#define PIN_PD21__CANRX4 PINMUX_PIN(PIN_PD21, 4, 2) -+#define PIN_PD21__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD21, 6, 5) -+#define PIN_PD21__G1_TXEN PINMUX_PIN(PIN_PD21, 7, 1) -+#define PIN_PD22 118 -+#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) -+#define PIN_PD22__PDMC0_CLK PINMUX_PIN(PIN_PD22, 1, 2) -+#define PIN_PD22__PWMEXTRG0 PINMUX_PIN(PIN_PD22, 3, 4) -+#define PIN_PD22__RD1 PINMUX_PIN(PIN_PD22, 4, 2) -+#define PIN_PD22__CANTX5 PINMUX_PIN(PIN_PD22, 6, 2) -+#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 7, 1) -+#define PIN_PD23 119 -+#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) -+#define PIN_PD23__PDMC0_DS0 PINMUX_PIN(PIN_PD23, 1, 2) -+#define PIN_PD23__PWMEXTRG1 PINMUX_PIN(PIN_PD23, 3, 4) -+#define PIN_PD23__RF1 PINMUX_PIN(PIN_PD23, 4, 2) -+#define PIN_PD23__ISC_MCK PINMUX_PIN(PIN_PD23, 5, 2) -+#define PIN_PD23__CANRX5 PINMUX_PIN(PIN_PD23, 6, 2) -+#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 7, 1) -+#define PIN_PD24 120 -+#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) -+#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 1, 2) -+#define PIN_PD24__PWMFI0 PINMUX_PIN(PIN_PD24, 3, 4) -+#define PIN_PD24__RK1 PINMUX_PIN(PIN_PD24, 4, 2) -+#define PIN_PD24__ISC_D0 PINMUX_PIN(PIN_PD24, 5, 2) -+#define PIN_PD24__G1_RXDV PINMUX_PIN(PIN_PD24, 7, 1) -+#define PIN_PD25 121 -+#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) -+#define PIN_PD25__PDMC1_CLK PINMUX_PIN(PIN_PD25, 1, 2) -+#define PIN_PD25__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD25, 2, 2) -+#define PIN_PD25__PWMFI1 PINMUX_PIN(PIN_PD25, 3, 4) -+#define PIN_PD25__TD1 PINMUX_PIN(PIN_PD25, 4, 2) -+#define PIN_PD25__ISC_D1 PINMUX_PIN(PIN_PD25, 5, 2) -+#define PIN_PD25__G1_RX0 PINMUX_PIN(PIN_PD25, 7, 1) -+#define PIN_PD26 122 -+#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) -+#define PIN_PD26__PDMC1_DS0 PINMUX_PIN(PIN_PD26, 1, 2) -+#define PIN_PD26__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD26, 2, 2) -+#define PIN_PD26__ADTRG PINMUX_PIN(PIN_PD26, 3, 3) -+#define PIN_PD26__TF1 PINMUX_PIN(PIN_PD26, 4, 2) -+#define PIN_PD26__ISC_D2 PINMUX_PIN(PIN_PD26, 5, 2) -+#define PIN_PD26__G1_RX1 PINMUX_PIN(PIN_PD26, 7, 1) -+#define PIN_PD27 123 -+#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) -+#define PIN_PD27__PDMC1_DS1 PINMUX_PIN(PIN_PD27, 1, 2) -+#define PIN_PD27__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD27, 2, 2) -+#define PIN_PD27__TIOA0 PINMUX_PIN(PIN_PD27, 3, 3) -+#define PIN_PD27__TK1 PINMUX_PIN(PIN_PD27, 4, 2) -+#define PIN_PD27__ISC_D3 PINMUX_PIN(PIN_PD27, 5, 2) -+#define PIN_PD27__G1_RXER PINMUX_PIN(PIN_PD27, 7, 1) -+#define PIN_PD28 124 -+#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) -+#define PIN_PD28__RD0 PINMUX_PIN(PIN_PD28, 1, 2) -+#define PIN_PD28__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD28, 2, 2) -+#define PIN_PD28__TIOB0 PINMUX_PIN(PIN_PD28, 3, 3) -+#define PIN_PD28__I2SMCC1_CK PINMUX_PIN(PIN_PD28, 4, 2) -+#define PIN_PD28__ISC_D4 PINMUX_PIN(PIN_PD28, 5, 2) -+#define PIN_PD28__PWML3 PINMUX_PIN(PIN_PD28, 6, 5) -+#define PIN_PD28__G1_MDC PINMUX_PIN(PIN_PD28, 7, 1) -+#define PIN_PD29 125 -+#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) -+#define PIN_PD29__RF0 PINMUX_PIN(PIN_PD29, 1, 2) -+#define PIN_PD29__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD29, 2, 2) -+#define PIN_PD29__TCLK0 PINMUX_PIN(PIN_PD29, 3, 3) -+#define PIN_PD29__I2SMCC1_WS PINMUX_PIN(PIN_PD29, 4, 2) -+#define PIN_PD29__ISC_D5 PINMUX_PIN(PIN_PD29, 5, 2) -+#define PIN_PD29__PWMH3 PINMUX_PIN(PIN_PD29, 6, 5) -+#define PIN_PD29__G1_MDIO PINMUX_PIN(PIN_PD29, 7, 1) -+#define PIN_PD30 126 -+#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) -+#define PIN_PD30__RK0 PINMUX_PIN(PIN_PD30, 1, 2) -+#define PIN_PD30__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD30, 2, 2) -+#define PIN_PD30__TIOA1 PINMUX_PIN(PIN_PD30, 3, 3) -+#define PIN_PD30__I2SMCC1_MCK PINMUX_PIN(PIN_PD30, 4, 2) -+#define PIN_PD30__ISC_D6 PINMUX_PIN(PIN_PD30, 5, 2) -+#define PIN_PD30__PWMEXTRG0 PINMUX_PIN(PIN_PD30, 6, 5) -+#define PIN_PD30__G1_TXCK PINMUX_PIN(PIN_PD30, 7, 1) -+#define PIN_PD31 127 -+#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) -+#define PIN_PD31__TD0 PINMUX_PIN(PIN_PD31, 1, 2) -+#define PIN_PD31__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD31, 2, 2) -+#define PIN_PD31__TIOB1 PINMUX_PIN(PIN_PD31, 3, 3) -+#define PIN_PD31__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PD31, 4, 2) -+#define PIN_PD31__ISC_D7 PINMUX_PIN(PIN_PD31, 5, 2) -+#define PIN_PD31__PWM_EXTRG1 PINMUX_PIN(PIN_PD31, 6, 5) -+#define PIN_PD31__G1_TX2 PINMUX_PIN(PIN_PD31, 7, 1) -+#define PIN_PE0 128 -+#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0) -+#define PIN_PE0__TF0 PINMUX_PIN(PIN_PE0, 1, 2) -+#define PIN_PE0__FLEXCOM6_IO2 PINMUX_PIN(PIN_PE0, 2, 2) -+#define PIN_PE0__TCLK1 PINMUX_PIN(PIN_PE0, 3, 3) -+#define PIN_PE0__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PE0, 4, 2) -+#define PIN_PE0__ISC_HSYNC PINMUX_PIN(PIN_PE0, 5, 2) -+#define PIN_PE0__PWMFI0 PINMUX_PIN(PIN_PE0, 6, 5) -+#define PIN_PE0__G1_TX3 PINMUX_PIN(PIN_PE0, 7, 1) -+#define PIN_PE1 129 -+#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0) -+#define PIN_PE1__TK0 PINMUX_PIN(PIN_PE1, 1, 2) -+#define PIN_PE1__FLEXCOM6_IO3 PINMUX_PIN(PIN_PE1, 2, 2) -+#define PIN_PE1__TIOA2 PINMUX_PIN(PIN_PE1, 3, 3) -+#define PIN_PE1__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PE1, 4, 2) -+#define PIN_PE1__ISC_VSYNC PINMUX_PIN(PIN_PE1, 5, 2) -+#define PIN_PE1__PWMFI1 PINMUX_PIN(PIN_PE1, 6, 5) -+#define PIN_PE1__G1_RX2 PINMUX_PIN(PIN_PE1, 7, 1) -+#define PIN_PE2 130 -+#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0) -+#define PIN_PE2__PWML0 PINMUX_PIN(PIN_PE2, 1, 5) -+#define PIN_PE2__FLEXCOM6_IO4 PINMUX_PIN(PIN_PE2, 2, 2) -+#define PIN_PE2__TIOB2 PINMUX_PIN(PIN_PE2, 3, 3) -+#define PIN_PE2__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PE2, 4, 2) -+#define PIN_PE2__ISC_FIELD PINMUX_PIN(PIN_PE2, 5, 2) -+#define PIN_PE2__G1_RX3 PINMUX_PIN(PIN_PE2, 7, 1) -+#define PIN_PE3 131 -+#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0) -+#define PIN_PE3__PWMH0 PINMUX_PIN(PIN_PE3, 1, 5) -+#define PIN_PE3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PE3, 2, 4) -+#define PIN_PE3__TCLK2 PINMUX_PIN(PIN_PE3, 3, 3) -+#define PIN_PE3__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE3, 4, 2) -+#define PIN_PE3__ISC_PCK PINMUX_PIN(PIN_PE3, 5, 2) -+#define PIN_PE3__G1_RXCK PINMUX_PIN(PIN_PE3, 7, 1) -+#define PIN_PE4 132 -+#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0) -+#define PIN_PE4__PWML1 PINMUX_PIN(PIN_PE4, 1, 5) -+#define PIN_PE4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PE4, 2, 4) -+#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 3, 3) -+#define PIN_PE4__I2SMCC1_DIN1 PINMUX_PIN(PIN_PE4, 4, 2) -+#define PIN_PE4__ISC_D8 PINMUX_PIN(PIN_PE4, 5, 2) -+#define PIN_PE4__G1_TXER PINMUX_PIN(PIN_PE4, 7, 1) -+#define PIN_PE5 133 -+#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0) -+#define PIN_PE5__PWMH1 PINMUX_PIN(PIN_PE5, 1, 5) -+#define PIN_PE5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PE5, 2, 4) -+#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 3, 3) -+#define PIN_PE5__I2SMCC1_DIN2 PINMUX_PIN(PIN_PE5, 4, 2) -+#define PIN_PE5__ISC_D9 PINMUX_PIN(PIN_PE5, 5, 2) -+#define PIN_PE5__G1_COL PINMUX_PIN(PIN_PE5, 7, 1) -+#define PIN_PE6 134 -+#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0) -+#define PIN_PE6__PWML2 PINMUX_PIN(PIN_PE6, 1, 5) -+#define PIN_PE6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PE6, 2, 4) -+#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 3, 3) -+#define PIN_PE6__I2SMCC1_DIN3 PINMUX_PIN(PIN_PE6, 4, 2) -+#define PIN_PE6__ISC_D10 PINMUX_PIN(PIN_PE6, 5, 2) -+#define PIN_PE6__G1_CRS PINMUX_PIN(PIN_PE6, 7, 1) -+#define PIN_PE7 135 -+#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0) -+#define PIN_PE7__PWMH2 PINMUX_PIN(PIN_PE7, 1, 5) -+#define PIN_PE7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PE7, 2, 4) -+#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 3, 3) -+#define PIN_PE7__ISC_D11 PINMUX_PIN(PIN_PE7, 5, 2) -+#define PIN_PE7__G1_TSUCOMP PINMUX_PIN(PIN_PE7, 7, 1) ---- /dev/null -+++ b/arch/arm/boot/dts/sama7g5.dtsi -@@ -0,0 +1,528 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC -+ * -+ * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries -+ * -+ * Author: Eugen Hristev -+ * Author: Claudiu Beznea -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/ { -+ model = "Microchip SAMA7G5 family SoC"; -+ compatible = "microchip,sama7g5"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ interrupt-parent = <&gic>; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a7"; -+ reg = <0x0>; -+ }; -+ }; -+ -+ clocks { -+ slow_xtal: slow_xtal { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ }; -+ -+ main_xtal: main_xtal { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ }; -+ -+ usb_clk: usb_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <48000000>; -+ }; -+ }; -+ -+ vddout25: fixed-regulator-vddout25 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "VDDOUT25"; -+ regulator-min-microvolt = <2500000>; -+ regulator-max-microvolt = <2500000>; -+ regulator-boot-on; -+ status = "disabled"; -+ }; -+ -+ ns_sram: sram@100000 { -+ compatible = "mmio-sram"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0x100000 0x20000>; -+ ranges; -+ }; -+ -+ soc { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ secumod: secumod@e0004000 { -+ compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; -+ reg = <0xe0004000 0x4000>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ sfrbu: sfr@e0008000 { -+ compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; -+ reg = <0xe0008000 0x20>; -+ }; -+ -+ pioA: pinctrl@e0014000 { -+ compatible = "microchip,sama7g5-pinctrl"; -+ reg = <0xe0014000 0x800>; -+ interrupts = , -+ , -+ , -+ , -+ ; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; -+ }; -+ -+ pmc: pmc@e0018000 { -+ compatible = "microchip,sama7g5-pmc", "syscon"; -+ reg = <0xe0018000 0x200>; -+ interrupts = ; -+ #clock-cells = <2>; -+ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; -+ clock-names = "td_slck", "md_slck", "main_xtal"; -+ }; -+ -+ rtt: rtt@e001d020 { -+ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; -+ reg = <0xe001d020 0x30>; -+ interrupts = ; -+ clocks = <&clk32k 0>; -+ }; -+ -+ clk32k: clock-controller@e001d050 { -+ compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; -+ reg = <0xe001d050 0x4>; -+ clocks = <&slow_xtal>; -+ #clock-cells = <1>; -+ }; -+ -+ gpbr: gpbr@e001d060 { -+ compatible = "microchip,sama7g5-gpbr", "syscon"; -+ reg = <0xe001d060 0x48>; -+ }; -+ -+ ps_wdt: watchdog@e001d180 { -+ compatible = "microchip,sama7g5-wdt"; -+ reg = <0xe001d180 0x24>; -+ interrupts = ; -+ clocks = <&clk32k 0>; -+ }; -+ -+ sdmmc0: mmc@e1204000 { -+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; -+ reg = <0xe1204000 0x4000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>; -+ clock-names = "hclock", "multclk"; -+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; -+ assigned-clocks = <&pmc PMC_TYPE_GCK 80>; -+ assigned-clock-rates = <200000000>; -+ microchip,sdcal-inverted; -+ status = "disabled"; -+ }; -+ -+ sdmmc1: mmc@e1208000 { -+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; -+ reg = <0xe1208000 0x4000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>; -+ clock-names = "hclock", "multclk"; -+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; -+ assigned-clocks = <&pmc PMC_TYPE_GCK 81>; -+ assigned-clock-rates = <200000000>; -+ microchip,sdcal-inverted; -+ status = "disabled"; -+ }; -+ -+ sdmmc2: mmc@e120c000 { -+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; -+ reg = <0xe120c000 0x4000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>; -+ clock-names = "hclock", "multclk"; -+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; -+ assigned-clocks = <&pmc PMC_TYPE_GCK 82>; -+ assigned-clock-rates = <200000000>; -+ microchip,sdcal-inverted; -+ status = "disabled"; -+ }; -+ -+ pwm: pwm@e1604000 { -+ compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; -+ reg = <0xe1604000 0x4000>; -+ interrupts = ; -+ #pwm-cells = <3>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 77>; -+ status = "disabled"; -+ }; -+ -+ spdifrx: spdifrx@e1614000 { -+ #sound-dai-cells = <0>; -+ compatible = "microchip,sama7g5-spdifrx"; -+ reg = <0xe1614000 0x4000>; -+ interrupts = ; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>; -+ dma-names = "rx"; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>; -+ clock-names = "pclk", "gclk"; -+ status = "disabled"; -+ }; -+ -+ spdiftx: spdiftx@e1618000 { -+ #sound-dai-cells = <0>; -+ compatible = "microchip,sama7g5-spdiftx"; -+ reg = <0xe1618000 0x4000>; -+ interrupts = ; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>; -+ dma-names = "tx"; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>; -+ clock-names = "pclk", "gclk"; -+ }; -+ -+ i2s0: i2s@e161c000 { -+ compatible = "microchip,sama7g5-i2smcc"; -+ #sound-dai-cells = <0>; -+ reg = <0xe161c000 0x4000>; -+ interrupts = ; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>; -+ dma-names = "tx", "rx"; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; -+ clock-names = "pclk", "gclk"; -+ status = "disabled"; -+ }; -+ -+ i2s1: i2s@e1620000 { -+ compatible = "microchip,sama7g5-i2smcc"; -+ #sound-dai-cells = <0>; -+ reg = <0xe1620000 0x4000>; -+ interrupts = ; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>; -+ dma-names = "tx", "rx"; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; -+ clock-names = "pclk", "gclk"; -+ status = "disabled"; -+ }; -+ -+ pit64b0: timer@e1800000 { -+ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; -+ reg = <0xe1800000 0x4000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>; -+ clock-names = "pclk", "gclk"; -+ }; -+ -+ pit64b1: timer@e1804000 { -+ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; -+ reg = <0xe1804000 0x4000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>; -+ clock-names = "pclk", "gclk"; -+ }; -+ -+ flx0: flexcom@e1818000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe1818000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe1818000 0x800>; -+ status = "disabled"; -+ -+ uart0: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; -+ clock-names = "usart"; -+ dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, -+ <&dma1 AT91_XDMAC_DT_PERID(5)>; -+ dma-names = "tx", "rx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "disabled"; -+ }; -+ }; -+ -+ flx1: flexcom@e181c000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe181c000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe181c000 0x800>; -+ status = "disabled"; -+ -+ i2c1: i2c@600 { -+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = ; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; -+ atmel,fifo-size = <32>; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, -+ <&dma0 AT91_XDMAC_DT_PERID(8)>; -+ dma-names = "rx", "tx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "disabled"; -+ }; -+ }; -+ -+ flx3: flexcom@e1824000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe1824000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe1824000 0x800>; -+ status = "disabled"; -+ -+ uart3: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; -+ clock-names = "usart"; -+ dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>, -+ <&dma1 AT91_XDMAC_DT_PERID(11)>; -+ dma-names = "tx", "rx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "disabled"; -+ }; -+ }; -+ -+ trng: rng@e2010000 { -+ compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng"; -+ reg = <0xe2010000 0x100>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 97>; -+ status = "disabled"; -+ }; -+ -+ flx4: flexcom@e2018000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe2018000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe2018000 0x800>; -+ status = "disabled"; -+ -+ uart4: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; -+ clock-names = "usart"; -+ dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, -+ <&dma1 AT91_XDMAC_DT_PERID(13)>; -+ dma-names = "tx", "rx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ atmel,fifo-size = <16>; -+ status = "disabled"; -+ }; -+ }; -+ -+ flx7: flexcom@e2024000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe2024000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe2024000 0x800>; -+ status = "disabled"; -+ -+ uart7: serial@200 { -+ compatible = "atmel,at91sam9260-usart"; -+ reg = <0x200 0x200>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; -+ clock-names = "usart"; -+ dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, -+ <&dma1 AT91_XDMAC_DT_PERID(19)>; -+ dma-names = "tx", "rx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ atmel,fifo-size = <16>; -+ status = "disabled"; -+ }; -+ }; -+ -+ gmac0: ethernet@e2800000 { -+ compatible = "microchip,sama7g5-gem"; -+ reg = <0xe2800000 0x1000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>; -+ clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; -+ assigned-clocks = <&pmc PMC_TYPE_GCK 51>; -+ assigned-clock-rates = <125000000>; -+ status = "disabled"; -+ }; -+ -+ gmac1: ethernet@e2804000 { -+ compatible = "microchip,sama7g5-emac"; -+ reg = <0xe2804000 0x1000>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>; -+ clock-names = "pclk", "hclk"; -+ status = "disabled"; -+ }; -+ -+ dma0: dma-controller@e2808000 { -+ compatible = "microchip,sama7g5-dma"; -+ reg = <0xe2808000 0x1000>; -+ interrupts = ; -+ #dma-cells = <1>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; -+ clock-names = "dma_clk"; -+ status = "disabled"; -+ }; -+ -+ dma1: dma-controller@e280c000 { -+ compatible = "microchip,sama7g5-dma"; -+ reg = <0xe280c000 0x1000>; -+ interrupts = ; -+ #dma-cells = <1>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; -+ clock-names = "dma_clk"; -+ status = "disabled"; -+ }; -+ -+ /* Place dma2 here despite it's address */ -+ dma2: dma-controller@e1200000 { -+ compatible = "microchip,sama7g5-dma"; -+ reg = <0xe1200000 0x1000>; -+ interrupts = ; -+ #dma-cells = <1>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; -+ clock-names = "dma_clk"; -+ dma-requests = <0>; -+ status = "disabled"; -+ }; -+ -+ flx8: flexcom@e2818000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe2818000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe2818000 0x800>; -+ status = "disabled"; -+ -+ i2c8: i2c@600 { -+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = ; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; -+ atmel,fifo-size = <32>; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, -+ <&dma0 AT91_XDMAC_DT_PERID(22)>; -+ dma-names = "rx", "tx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "disabled"; -+ }; -+ }; -+ -+ flx9: flexcom@e281c000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe281c000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe281c000 0x800>; -+ status = "disabled"; -+ -+ i2c9: i2c@600 { -+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; -+ reg = <0x600 0x200>; -+ interrupts = ; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; -+ atmel,fifo-size = <32>; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, -+ <&dma0 AT91_XDMAC_DT_PERID(24)>; -+ dma-names = "rx", "tx"; -+ atmel,use-dma-rx; -+ atmel,use-dma-tx; -+ status = "disabled"; -+ }; -+ }; -+ -+ flx11: flexcom@e2824000 { -+ compatible = "atmel,sama5d2-flexcom"; -+ reg = <0xe2824000 0x200>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0x0 0xe2824000 0x800>; -+ status = "disabled"; -+ -+ spi11: spi@400 { -+ compatible = "atmel,at91rm9200-spi"; -+ reg = <0x400 0x200>; -+ interrupts = ; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; -+ clock-names = "spi_clk"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ atmel,fifo-size = <32>; -+ dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, -+ <&dma0 AT91_XDMAC_DT_PERID(28)>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ }; -+ -+ gic: interrupt-controller@e8c11000 { -+ compatible = "arm,cortex-a7-gic"; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ interrupt-controller; -+ interrupt-parent; -+ reg = <0xe8c11000 0x1000>, -+ <0xe8c12000 0x2000>; -+ }; -+ }; -+}; diff --git a/target/linux/at91/patches-5.15/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch b/target/linux/at91/patches-5.15/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch deleted file mode 100644 index 68bf447a03..0000000000 --- a/target/linux/at91/patches-5.15/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 76dbc56ad65350d78d12bd9b36b00c36fb27addf Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 23 Aug 2021 16:19:12 +0300 -Subject: [PATCH 223/247] ARM: at91: pm: do not panic if ram controllers are - not enabled - -In case PM is enabled but there is no RAM controller information -in DT the code will panic. Avoid such scenarios by not initializing -platform specific PM code in case RAM controller is not provided -via DT. - -Reported-by: Eugen Hristev -Fixes: 827de1f123ba0 ("ARM: at91: remove at91_dt_initialize and machine init_early()") -Fixes: 892e1f4a3ae58 ("ARM: at91: pm: add sama7g5 ddr phy controller") -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 22 ++++++++++++++++------ - 1 file changed, 16 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -589,7 +589,7 @@ static const struct of_device_id ramc_ph - { /* Sentinel. */ }, - }; - --static __init void at91_dt_ramc(bool phy_mandatory) -+static __init int at91_dt_ramc(bool phy_mandatory) - { - struct device_node *np; - const struct of_device_id *of_id; -@@ -625,12 +625,18 @@ static __init void at91_dt_ramc(bool phy - /* Lookup for DDR PHY node, if any. */ - for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) { - soc_pm.data.ramc_phy = of_iomap(np, 0); -- if (!soc_pm.data.ramc_phy) -- panic(pr_fmt("unable to map ramc phy cpu registers\n")); -+ if (!soc_pm.data.ramc_phy) { -+ pr_err("unable to map ramc phy cpu registers\n"); -+ ret = -ENOMEM; -+ goto unmap_ramc; -+ } - } - -- if (phy_mandatory && !soc_pm.data.ramc_phy) -- panic(pr_fmt("DDR PHY is mandatory!\n")); -+ if (phy_mandatory && !soc_pm.data.ramc_phy) { -+ pr_err("DDR PHY is mandatory!\n"); -+ ret = -ENODEV; -+ goto unmap_ramc; -+ } - - if (!standby) { - pr_warn("ramc no standby function available\n"); -@@ -1163,13 +1169,17 @@ void __init sama7_pm_init(void) - [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) | - AT91_PM_IOMAP(SHDWC), - }; -+ int ret; - - if (!IS_ENABLED(CONFIG_SOC_SAMA7)) - return; - - at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); - -- at91_dt_ramc(true); -+ ret = at91_dt_ramc(true); -+ if (ret) -+ return; -+ - at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); - at91_pm_init(NULL); - diff --git a/target/linux/at91/patches-5.15/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch b/target/linux/at91/patches-5.15/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch deleted file mode 100644 index 11c0f2c1e3..0000000000 --- a/target/linux/at91/patches-5.15/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cf96a88e44f1fde9f1a30ab335329ff9e895e6f8 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 23 Aug 2021 16:19:13 +0300 -Subject: [PATCH 224/247] ARM: dts: at91: sama7g5: add ram controllers - -Add RAM and RAMC PHY controllers. These are necessary for platform -specific power management code. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210823131915.23857-3-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/sama7g5.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/sama7g5.dtsi -+++ b/arch/arm/boot/dts/sama7g5.dtsi -@@ -515,6 +515,18 @@ - }; - }; - -+ uddrc: uddrc@e3800000 { -+ compatible = "microchip,sama7g5-uddrc"; -+ reg = <0xe3800000 0x4000>; -+ status = "okay"; -+ }; -+ -+ ddr3phy: ddr3phy@e3804000 { -+ compatible = "microchip,sama7g5-ddr3phy"; -+ reg = <0xe3804000 0x1000>; -+ status = "okay"; -+ }; -+ - gic: interrupt-controller@e8c11000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; diff --git a/target/linux/at91/patches-5.15/225-ARM-dts-at91-sama7g5-add-securam-node.patch b/target/linux/at91/patches-5.15/225-ARM-dts-at91-sama7g5-add-securam-node.patch deleted file mode 100644 index f264f5c129..0000000000 --- a/target/linux/at91/patches-5.15/225-ARM-dts-at91-sama7g5-add-securam-node.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 1da1aae0b207d6a5ac7c3070b8d7c6ef61a32d71 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 23 Aug 2021 16:19:14 +0300 -Subject: [PATCH 225/247] ARM: dts: at91: sama7g5: add securam node - -Add securam node. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210823131915.23857-4-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/sama7g5.dtsi -+++ b/arch/arm/boot/dts/sama7g5.dtsi -@@ -75,6 +75,17 @@ - #size-cells = <1>; - ranges; - -+ securam: securam@e0000000 { -+ compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; -+ reg = <0xe0000000 0x4000>; -+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0xe0000000 0x4000>; -+ no-memory-wc; -+ status = "okay"; -+ }; -+ - secumod: secumod@e0004000 { - compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; - reg = <0xe0004000 0x4000>; diff --git a/target/linux/at91/patches-5.15/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch b/target/linux/at91/patches-5.15/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch deleted file mode 100644 index da941918a1..0000000000 --- a/target/linux/at91/patches-5.15/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 372fa27d07f66f97a4bf45621c1b840ce8417a85 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 23 Aug 2021 16:19:15 +0300 -Subject: [PATCH 226/247] ARM: dts: at91: sama7g5: add shdwc node - -Add shutdown controller node and enable it. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210823131915.23857-5-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/at91-sama7g5ek.dts | 9 +++++++++ - arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++ - 2 files changed, 20 insertions(+) - ---- a/arch/arm/boot/dts/at91-sama7g5ek.dts -+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts -@@ -634,6 +634,15 @@ - pinctrl-0 = <&pinctrl_sdmmc2_default>; - }; - -+&shdwc { -+ atmel,shdwc-debouncer = <976>; -+ status = "okay"; -+ -+ input@0 { -+ reg = <0>; -+ }; -+}; -+ - &spdifrx { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdifrx_default>; ---- a/arch/arm/boot/dts/sama7g5.dtsi -+++ b/arch/arm/boot/dts/sama7g5.dtsi -@@ -122,6 +122,17 @@ - clock-names = "td_slck", "md_slck", "main_xtal"; - }; - -+ shdwc: shdwc@e001d010 { -+ compatible = "microchip,sama7g5-shdwc", "syscon"; -+ reg = <0xe001d010 0x10>; -+ clocks = <&clk32k 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ atmel,wakeup-rtc-timer; -+ atmel,wakeup-rtt-timer; -+ status = "disabled"; -+ }; -+ - rtt: rtt@e001d020 { - compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; - reg = <0xe001d020 0x30>; diff --git a/target/linux/at91/patches-5.15/227-ARM-dts-at91-sama7g5-add-chipid.patch b/target/linux/at91/patches-5.15/227-ARM-dts-at91-sama7g5-add-chipid.patch deleted file mode 100644 index 3e307e418e..0000000000 --- a/target/linux/at91/patches-5.15/227-ARM-dts-at91-sama7g5-add-chipid.patch +++ /dev/null @@ -1,28 +0,0 @@ -From d216c1ecf978574216ece8140146c8dc0ea400e3 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 8 Sep 2021 12:43:29 +0300 -Subject: [PATCH 227/247] ARM: dts: at91: sama7g5: add chipid - -Add chipid node for sama7g5. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210908094329.182477-1-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/sama7g5.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/sama7g5.dtsi -+++ b/arch/arm/boot/dts/sama7g5.dtsi -@@ -159,6 +159,11 @@ - clocks = <&clk32k 0>; - }; - -+ chipid@e0020000 { -+ compatible = "microchip,sama7g5-chipid"; -+ reg = <0xe0020000 0x8>; -+ }; -+ - sdmmc0: mmc@e1204000 { - compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; - reg = <0xe1204000 0x4000>; diff --git a/target/linux/at91/patches-5.15/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch b/target/linux/at91/patches-5.15/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch deleted file mode 100644 index 02532b4722..0000000000 --- a/target/linux/at91/patches-5.15/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 2cd84ddf0e9623c6bc723b1df368cd8b16a3a8e2 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 30 Aug 2021 13:09:27 +0300 -Subject: [PATCH 228/247] ARM: at91: pm: switch backup area to vbat in backup - mode - -Backup area is now switched to VDDIN33 at boot (with the help of -bootloader). When switching to backup mode we need to switch backup area -to VBAT as all the other power sources are cut off. The resuming from -backup mode is done with the help of bootloader, so there is no need to -do something particular in Linux to restore backup area power source. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm.c | 52 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 52 insertions(+) - ---- a/arch/arm/mach-at91/pm.c -+++ b/arch/arm/mach-at91/pm.c -@@ -47,12 +47,26 @@ struct at91_pm_bu { - unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION]; - }; - -+/* -+ * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU -+ * @pswbu: power switch BU control registers -+ */ -+struct at91_pm_sfrbu_regs { -+ struct { -+ u32 key; -+ u32 ctrl; -+ u32 state; -+ u32 softsw; -+ } pswbu; -+}; -+ - /** - * struct at91_soc_pm - AT91 SoC power management data structure - * @config_shdwc_ws: wakeup sources configuration function for SHDWC - * @config_pmc_ws: wakeup srouces configuration function for PMC - * @ws_ids: wakup sources of_device_id array - * @data: PM data to be used on last phase of suspend -+ * @sfrbu_regs: SFRBU registers mapping - * @bu: backup unit mapped data (for backup mode) - * @memcs: memory chip select - */ -@@ -62,6 +76,7 @@ struct at91_soc_pm { - const struct of_device_id *ws_ids; - struct at91_pm_bu *bu; - struct at91_pm_data data; -+ struct at91_pm_sfrbu_regs sfrbu_regs; - void *memcs; - }; - -@@ -356,9 +371,36 @@ static int at91_suspend_finish(unsigned - return 0; - } - -+static void at91_pm_switch_ba_to_vbat(void) -+{ -+ unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu); -+ unsigned int val; -+ -+ /* Just for safety. */ -+ if (!soc_pm.data.sfrbu) -+ return; -+ -+ val = readl(soc_pm.data.sfrbu + offset); -+ -+ /* Already on VBAT. */ -+ if (!(val & soc_pm.sfrbu_regs.pswbu.state)) -+ return; -+ -+ val &= ~soc_pm.sfrbu_regs.pswbu.softsw; -+ val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl; -+ writel(val, soc_pm.data.sfrbu + offset); -+ -+ /* Wait for update. */ -+ val = readl(soc_pm.data.sfrbu + offset); -+ while (val & soc_pm.sfrbu_regs.pswbu.state) -+ val = readl(soc_pm.data.sfrbu + offset); -+} -+ - static void at91_pm_suspend(suspend_state_t state) - { - if (soc_pm.data.mode == AT91_PM_BACKUP) { -+ at91_pm_switch_ba_to_vbat(); -+ - cpu_suspend(0, at91_suspend_finish); - - /* The SRAM is lost between suspend cycles */ -@@ -1155,6 +1197,11 @@ void __init sama5d2_pm_init(void) - soc_pm.ws_ids = sama5d2_ws_ids; - soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws; - soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws; -+ -+ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8); -+ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); -+ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); -+ soc_pm.sfrbu_regs.pswbu.state = BIT(3); - } - - void __init sama7_pm_init(void) -@@ -1185,6 +1232,11 @@ void __init sama7_pm_init(void) - - soc_pm.ws_ids = sama7g5_ws_ids; - soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; -+ -+ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8); -+ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); -+ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); -+ soc_pm.sfrbu_regs.pswbu.state = BIT(2); - } - - static int __init at91_pm_modes_select(char *str) diff --git a/target/linux/at91/patches-5.15/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch b/target/linux/at91/patches-5.15/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch deleted file mode 100644 index b5074b58a0..0000000000 --- a/target/linux/at91/patches-5.15/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch +++ /dev/null @@ -1,42 +0,0 @@ -From e5f87471392b344b1261d1eaf93fd44710587ea9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 30 Sep 2021 18:42:17 +0300 -Subject: [PATCH 229/247] ARM: dts: at91: sama7g5ek: add suspend voltage for - ddr3l rail - -SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The -1.35V for DDR3L rail at run-time is selected by the proper configuration -on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended -the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of -configuration registers to provide proper voltages on its rail. Run-time -configuration registers could be configured differently than suspend -configuration register for MCP16502 (VSEL2 affects only run-time -configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK -switches to self-refresh. Even on self-refresh it needs to be powered by -a 1.35V rail. Thus, make sure the PMIC is configured properly when system -is suspended. - -Fixes: 7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/at91-sama7g5ek.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/at91-sama7g5ek.dts -+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts -@@ -196,11 +196,13 @@ - - regulator-state-standby { - regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1350000>; - regulator-mode = <4>; - }; - - regulator-state-mem { - regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1350000>; - regulator-mode = <4>; - }; - }; diff --git a/target/linux/at91/patches-5.15/230-ARM-at91-pm-group-constants-and-addresses-loading.patch b/target/linux/at91/patches-5.15/230-ARM-at91-pm-group-constants-and-addresses-loading.patch deleted file mode 100644 index e952f6c377..0000000000 --- a/target/linux/at91/patches-5.15/230-ARM-at91-pm-group-constants-and-addresses-loading.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 12330a9f6b99622e3c21ddcc720b02431b8a6e2d Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 30 Sep 2021 18:42:18 +0300 -Subject: [PATCH 230/247] ARM: at91: pm: group constants and addresses loading - -Group constants and addresses loading. This commit prepares the field for -the next one. - -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210930154219.2214051-3-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -1014,6 +1014,15 @@ ENTRY(at91_pm_suspend_in_sram) - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - -+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] -+ str tmp1, .mckr_offset -+ ldr tmp1, [r0, #PM_DATA_PMC_VERSION] -+ str tmp1, .pmc_version -+ ldr tmp1, [r0, #PM_DATA_MEMCTRL] -+ str tmp1, .memtype -+ ldr tmp1, [r0, #PM_DATA_MODE] -+ str tmp1, .pm_mode -+ - ldr tmp1, [r0, #PM_DATA_PMC] - str tmp1, .pmc_base - ldr tmp1, [r0, #PM_DATA_RAMC0] -@@ -1022,14 +1031,6 @@ ENTRY(at91_pm_suspend_in_sram) - str tmp1, .sramc1_base - ldr tmp1, [r0, #PM_DATA_RAMC_PHY] - str tmp1, .sramc_phy_base -- ldr tmp1, [r0, #PM_DATA_MEMCTRL] -- str tmp1, .memtype -- ldr tmp1, [r0, #PM_DATA_MODE] -- str tmp1, .pm_mode -- ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] -- str tmp1, .mckr_offset -- ldr tmp1, [r0, #PM_DATA_PMC_VERSION] -- str tmp1, .pmc_version - /* Both ldrne below are here to preload their address in the TLB */ - ldr tmp1, [r0, #PM_DATA_SHDWC] - str tmp1, .shdwc diff --git a/target/linux/at91/patches-5.15/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch b/target/linux/at91/patches-5.15/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch deleted file mode 100644 index bd7fb4e39e..0000000000 --- a/target/linux/at91/patches-5.15/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 6075bbc75e55258a762d618cd459dbe0dd38aff9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Thu, 30 Sep 2021 18:42:19 +0300 -Subject: [PATCH 231/247] ARM: at91: pm: preload base address of controllers in - tlb - -In suspend/resume procedure for AT91 architecture different controllers -(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings -for power saving. Commit f0bbf17958e8 ("ARM: at91: pm: add self-refresh -support for sama7g5") introduced the access to RAMC PHY controller for -SAMA7G5. The access to this controller is done after RAMC ports are -closed, thus any TLB walk necessary for RAMC PHY virtual address will -fail. In the development branch this was not encountered. However, on -current kernel the issue is reproducible. - -To solve the issue the previous mechanism of pre-loading the TLB with -the RAMC PHY virtual address has been used. However, only the addition -of this new pre-load breaks the functionality for ARMv5 based -devices (SAM9X60). This behavior has been encountered previously -while debugging this code and using the same mechanism for pre-loading -address for different controllers (e.g. pin controller, the assumption -being that other requested translations are replaced from TLB). - -To solve this new issue the TLB flush + the extension of pre-loading -the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The -rest of the controllers should have been pre-loaded previously, anyway. - -Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") -Depends-on: e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading") -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com ---- - arch/arm/mach-at91/pm_suspend.S | 25 ++++++++++++++++++++++++- - 1 file changed, 24 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-at91/pm_suspend.S -+++ b/arch/arm/mach-at91/pm_suspend.S -@@ -1014,6 +1014,10 @@ ENTRY(at91_pm_suspend_in_sram) - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - -+ /* Flush tlb. */ -+ mov r4, #0 -+ mcr p15, 0, r4, c8, c7, 0 -+ - ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] - str tmp1, .mckr_offset - ldr tmp1, [r0, #PM_DATA_PMC_VERSION] -@@ -1023,23 +1027,42 @@ ENTRY(at91_pm_suspend_in_sram) - ldr tmp1, [r0, #PM_DATA_MODE] - str tmp1, .pm_mode - -+ /* -+ * ldrne below are here to preload their address in the TLB as access -+ * to RAM may be limited while in self-refresh. -+ */ - ldr tmp1, [r0, #PM_DATA_PMC] - str tmp1, .pmc_base -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0] -+ - ldr tmp1, [r0, #PM_DATA_RAMC0] - str tmp1, .sramc_base -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0] -+ - ldr tmp1, [r0, #PM_DATA_RAMC1] - str tmp1, .sramc1_base -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0] -+ -+#ifndef CONFIG_SOC_SAM_V4_V5 -+ /* ldrne below are here to preload their address in the TLB */ - ldr tmp1, [r0, #PM_DATA_RAMC_PHY] - str tmp1, .sramc_phy_base -- /* Both ldrne below are here to preload their address in the TLB */ -+ cmp tmp1, #0 -+ ldrne tmp2, [tmp1, #0] -+ - ldr tmp1, [r0, #PM_DATA_SHDWC] - str tmp1, .shdwc - cmp tmp1, #0 - ldrne tmp2, [tmp1, #0] -+ - ldr tmp1, [r0, #PM_DATA_SFRBU] - str tmp1, .sfrbu - cmp tmp1, #0 - ldrne tmp2, [tmp1, #0x10] -+#endif - - /* Active the self-refresh mode */ - at91_sramc_self_refresh_ena diff --git a/target/linux/at91/patches-5.15/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch b/target/linux/at91/patches-5.15/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch deleted file mode 100644 index 9b59d9521f..0000000000 --- a/target/linux/at91/patches-5.15/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 98d2c4ca97dde30616fa78ad5677825b1966cec6 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 15 Sep 2021 10:48:35 +0300 -Subject: [PATCH 232/247] ARM: dts: at91: sama7g5ek: use proper slew-rate - settings for GMACs - -Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain -GMAC's MDIO pins should be configured with slew-rate enabled, while the -data + signaling pins should be configured with slew-rate disabled when -GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets -the slew-rate as enabled for all pins. Adapt the device tree to comply -with these. - -Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------ - 1 file changed, 22 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/at91-sama7g5ek.dts -+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts -@@ -355,7 +355,10 @@ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; -+ pinctrl-0 = <&pinctrl_gmac0_default -+ &pinctrl_gmac0_mdio_default -+ &pinctrl_gmac0_txck_default -+ &pinctrl_gmac0_phy_irq>; - phy-mode = "rgmii-id"; - status = "okay"; - -@@ -370,7 +373,9 @@ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>; -+ pinctrl-0 = <&pinctrl_gmac1_default -+ &pinctrl_gmac1_mdio_default -+ &pinctrl_gmac1_phy_irq>; - phy-mode = "rmii"; - status = "okay"; - -@@ -425,14 +430,20 @@ - , - , - , -- , -- , - ; -+ slew-rate = <0>; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac0_mdio_default: gmac0_mdio_default { -+ pinmux = , -+ ; - bias-disable; - }; - - pinctrl_gmac0_txck_default: gmac0_txck_default { - pinmux = ; -+ slew-rate = <0>; - bias-pull-up; - }; - -@@ -449,8 +460,13 @@ - , - , - , -- , -- , -+ ; -+ slew-rate = <0>; -+ bias-disable; -+ }; -+ -+ pinctrl_gmac1_mdio_default: gmac1_mdio_default { -+ pinmux = , - ; - bias-disable; - }; diff --git a/target/linux/at91/patches-5.15/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch b/target/linux/at91/patches-5.15/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch deleted file mode 100644 index 61ed933f02..0000000000 --- a/target/linux/at91/patches-5.15/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 4c0b77276307d2cba8ae2595cbae4cc916c84c36 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 15 Sep 2021 10:48:36 +0300 -Subject: [PATCH 233/247] ARM: dts: at91: sama7g5ek: to not touch slew-rate for - SDMMC pins - -With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate") -and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement") -the slew-rate is enabled by default for each configured pin. The datasheet -specifies at chapter "Output Driver AC Characteristics" that HSIO -drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate -setting but are rather calibrated against an external 1% resistor mounted -on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal -frequency and the external load, it is possible to adjust their target -output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled -at the moment in device tree). - -Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") -Signed-off-by: Claudiu Beznea -Signed-off-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com ---- - arch/arm/boot/dts/at91-sama7g5ek.dts | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/arm/boot/dts/at91-sama7g5ek.dts -+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts -@@ -558,6 +558,7 @@ - , - , - ; -+ slew-rate = <0>; - bias-pull-up; - }; - -@@ -565,6 +566,7 @@ - pinmux = , - , - ; -+ slew-rate = <0>; - bias-pull-up; - }; - }; -@@ -576,6 +578,7 @@ - , - , - ; -+ slew-rate = <0>; - bias-pull-up; - }; - -@@ -584,6 +587,7 @@ - , - , - ; -+ slew-rate = <0>; - bias-pull-up; - }; - }; -@@ -595,11 +599,13 @@ - , - , - ; -+ slew-rate = <0>; - bias-pull-up; - }; - - ck { - pinmux = ; -+ slew-rate = <0>; - bias-pull-up; - }; - }; diff --git a/target/linux/at91/patches-5.15/234-clk-at91-re-factor-clocks-suspend-resume.patch b/target/linux/at91/patches-5.15/234-clk-at91-re-factor-clocks-suspend-resume.patch deleted file mode 100644 index 5d399f6535..0000000000 --- a/target/linux/at91/patches-5.15/234-clk-at91-re-factor-clocks-suspend-resume.patch +++ /dev/null @@ -1,1342 +0,0 @@ -From 65bb4687b2a5c6f02f44345540c3389d6e7523e7 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:05 +0300 -Subject: [PATCH 234/247] clk: at91: re-factor clocks suspend/resume - -SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where -most of the SoC's components are powered off (including PMC). Resuming -from this mode is done with the help of bootloader. Peripherals are not -aware of the power saving mode thus most of them are disabling clocks in -proper suspend API and re-enable them in resume API without taking into -account the previously setup rate. Moreover some of the peripherals are -acting as wakeup sources and are not disabling the clocks in this -scenario, when suspending. Since backup mode cuts the power for -peripherals, in resume part these clocks needs to be re-configured. - -The initial PMC suspend/resume code was designed only for SAMA5D2's PMC -(as it was the only one supporting backup mode). SAMA7G supports also -backup mode and its PMC is different (few new functionalities, different -registers offsets, different offsets in registers for each -functionalities). To address both SAMA5D2 and SAMA7G5 PMC add -.save_context()/.resume_context() support to each clocks driver and call -this from PMC driver. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-generated.c | 46 +++++-- - drivers/clk/at91/clk-main.c | 66 ++++++++++ - drivers/clk/at91/clk-master.c | 194 ++++++++++++++++++++++++++-- - drivers/clk/at91/clk-peripheral.c | 40 +++++- - drivers/clk/at91/clk-pll.c | 39 ++++++ - drivers/clk/at91/clk-programmable.c | 29 ++++- - drivers/clk/at91/clk-sam9x60-pll.c | 68 +++++++++- - drivers/clk/at91/clk-system.c | 20 +++ - drivers/clk/at91/clk-usb.c | 27 ++++ - drivers/clk/at91/clk-utmi.c | 39 ++++++ - drivers/clk/at91/pmc.c | 147 +-------------------- - drivers/clk/at91/pmc.h | 24 ++-- - 12 files changed, 558 insertions(+), 181 deletions(-) - ---- a/drivers/clk/at91/clk-generated.c -+++ b/drivers/clk/at91/clk-generated.c -@@ -27,6 +27,7 @@ struct clk_generated { - u32 id; - u32 gckdiv; - const struct clk_pcr_layout *layout; -+ struct at91_clk_pms pms; - u8 parent_id; - int chg_pid; - }; -@@ -34,25 +35,35 @@ struct clk_generated { - #define to_clk_generated(hw) \ - container_of(hw, struct clk_generated, hw) - --static int clk_generated_enable(struct clk_hw *hw) -+static int clk_generated_set(struct clk_generated *gck, int status) - { -- struct clk_generated *gck = to_clk_generated(hw); - unsigned long flags; -- -- pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n", -- __func__, gck->gckdiv, gck->parent_id); -+ unsigned int enable = status ? AT91_PMC_PCR_GCKEN : 0; - - spin_lock_irqsave(gck->lock, flags); - regmap_write(gck->regmap, gck->layout->offset, - (gck->id & gck->layout->pid_mask)); - regmap_update_bits(gck->regmap, gck->layout->offset, - AT91_PMC_PCR_GCKDIV_MASK | gck->layout->gckcss_mask | -- gck->layout->cmd | AT91_PMC_PCR_GCKEN, -+ gck->layout->cmd | enable, - field_prep(gck->layout->gckcss_mask, gck->parent_id) | - gck->layout->cmd | - FIELD_PREP(AT91_PMC_PCR_GCKDIV_MASK, gck->gckdiv) | -- AT91_PMC_PCR_GCKEN); -+ enable); - spin_unlock_irqrestore(gck->lock, flags); -+ -+ return 0; -+} -+ -+static int clk_generated_enable(struct clk_hw *hw) -+{ -+ struct clk_generated *gck = to_clk_generated(hw); -+ -+ pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n", -+ __func__, gck->gckdiv, gck->parent_id); -+ -+ clk_generated_set(gck, 1); -+ - return 0; - } - -@@ -249,6 +260,23 @@ static int clk_generated_set_rate(struct - return 0; - } - -+static int clk_generated_save_context(struct clk_hw *hw) -+{ -+ struct clk_generated *gck = to_clk_generated(hw); -+ -+ gck->pms.status = clk_generated_is_enabled(&gck->hw); -+ -+ return 0; -+} -+ -+static void clk_generated_restore_context(struct clk_hw *hw) -+{ -+ struct clk_generated *gck = to_clk_generated(hw); -+ -+ if (gck->pms.status) -+ clk_generated_set(gck, gck->pms.status); -+} -+ - static const struct clk_ops generated_ops = { - .enable = clk_generated_enable, - .disable = clk_generated_disable, -@@ -258,6 +286,8 @@ static const struct clk_ops generated_op - .get_parent = clk_generated_get_parent, - .set_parent = clk_generated_set_parent, - .set_rate = clk_generated_set_rate, -+ .save_context = clk_generated_save_context, -+ .restore_context = clk_generated_restore_context, - }; - - /** -@@ -324,8 +354,6 @@ at91_clk_register_generated(struct regma - if (ret) { - kfree(gck); - hw = ERR_PTR(ret); -- } else { -- pmc_register_id(id); - } - - return hw; ---- a/drivers/clk/at91/clk-main.c -+++ b/drivers/clk/at91/clk-main.c -@@ -28,6 +28,7 @@ - struct clk_main_osc { - struct clk_hw hw; - struct regmap *regmap; -+ struct at91_clk_pms pms; - }; - - #define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw) -@@ -37,6 +38,7 @@ struct clk_main_rc_osc { - struct regmap *regmap; - unsigned long frequency; - unsigned long accuracy; -+ struct at91_clk_pms pms; - }; - - #define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw) -@@ -51,6 +53,7 @@ struct clk_rm9200_main { - struct clk_sam9x5_main { - struct clk_hw hw; - struct regmap *regmap; -+ struct at91_clk_pms pms; - u8 parent; - }; - -@@ -120,10 +123,29 @@ static int clk_main_osc_is_prepared(stru - return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp); - } - -+static int clk_main_osc_save_context(struct clk_hw *hw) -+{ -+ struct clk_main_osc *osc = to_clk_main_osc(hw); -+ -+ osc->pms.status = clk_main_osc_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void clk_main_osc_restore_context(struct clk_hw *hw) -+{ -+ struct clk_main_osc *osc = to_clk_main_osc(hw); -+ -+ if (osc->pms.status) -+ clk_main_osc_prepare(hw); -+} -+ - static const struct clk_ops main_osc_ops = { - .prepare = clk_main_osc_prepare, - .unprepare = clk_main_osc_unprepare, - .is_prepared = clk_main_osc_is_prepared, -+ .save_context = clk_main_osc_save_context, -+ .restore_context = clk_main_osc_restore_context, - }; - - struct clk_hw * __init -@@ -240,12 +262,31 @@ static unsigned long clk_main_rc_osc_rec - return osc->accuracy; - } - -+static int clk_main_rc_osc_save_context(struct clk_hw *hw) -+{ -+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); -+ -+ osc->pms.status = clk_main_rc_osc_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void clk_main_rc_osc_restore_context(struct clk_hw *hw) -+{ -+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); -+ -+ if (osc->pms.status) -+ clk_main_rc_osc_prepare(hw); -+} -+ - static const struct clk_ops main_rc_osc_ops = { - .prepare = clk_main_rc_osc_prepare, - .unprepare = clk_main_rc_osc_unprepare, - .is_prepared = clk_main_rc_osc_is_prepared, - .recalc_rate = clk_main_rc_osc_recalc_rate, - .recalc_accuracy = clk_main_rc_osc_recalc_accuracy, -+ .save_context = clk_main_rc_osc_save_context, -+ .restore_context = clk_main_rc_osc_restore_context, - }; - - struct clk_hw * __init -@@ -465,12 +506,37 @@ static u8 clk_sam9x5_main_get_parent(str - return clk_main_parent_select(status); - } - -+static int clk_sam9x5_main_save_context(struct clk_hw *hw) -+{ -+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); -+ -+ clkmain->pms.status = clk_main_rc_osc_is_prepared(&clkmain->hw); -+ clkmain->pms.parent = clk_sam9x5_main_get_parent(&clkmain->hw); -+ -+ return 0; -+} -+ -+static void clk_sam9x5_main_restore_context(struct clk_hw *hw) -+{ -+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); -+ int ret; -+ -+ ret = clk_sam9x5_main_set_parent(hw, clkmain->pms.parent); -+ if (ret) -+ return; -+ -+ if (clkmain->pms.status) -+ clk_sam9x5_main_prepare(hw); -+} -+ - static const struct clk_ops sam9x5_main_ops = { - .prepare = clk_sam9x5_main_prepare, - .is_prepared = clk_sam9x5_main_is_prepared, - .recalc_rate = clk_sam9x5_main_recalc_rate, - .set_parent = clk_sam9x5_main_set_parent, - .get_parent = clk_sam9x5_main_get_parent, -+ .save_context = clk_sam9x5_main_save_context, -+ .restore_context = clk_sam9x5_main_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -37,6 +37,7 @@ struct clk_master { - spinlock_t *lock; - const struct clk_master_layout *layout; - const struct clk_master_characteristics *characteristics; -+ struct at91_clk_pms pms; - u32 *mux_table; - u32 mckr; - int chg_pid; -@@ -112,10 +113,52 @@ static unsigned long clk_master_div_reca - return rate; - } - -+static int clk_master_div_save_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ struct clk_hw *parent_hw = clk_hw_get_parent(hw); -+ unsigned long flags; -+ unsigned int mckr, div; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_read(master->regmap, master->layout->offset, &mckr); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ mckr &= master->layout->mask; -+ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ div = master->characteristics->divisors[div]; -+ -+ master->pms.parent_rate = clk_hw_get_rate(parent_hw); -+ master->pms.rate = DIV_ROUND_CLOSEST(master->pms.parent_rate, div); -+ -+ return 0; -+} -+ -+static void clk_master_div_restore_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; -+ unsigned int mckr; -+ u8 div; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_read(master->regmap, master->layout->offset, &mckr); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ mckr &= master->layout->mask; -+ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ div = master->characteristics->divisors[div]; -+ -+ if (div != DIV_ROUND_CLOSEST(master->pms.parent_rate, master->pms.rate)) -+ pr_warn("MCKR DIV not configured properly by firmware!\n"); -+} -+ - static const struct clk_ops master_div_ops = { - .prepare = clk_master_prepare, - .is_prepared = clk_master_is_prepared, - .recalc_rate = clk_master_div_recalc_rate, -+ .save_context = clk_master_div_save_context, -+ .restore_context = clk_master_div_restore_context, - }; - - static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate, -@@ -125,7 +168,9 @@ static int clk_master_div_set_rate(struc - const struct clk_master_characteristics *characteristics = - master->characteristics; - unsigned long flags; -+ unsigned int mckr, tmp; - int div, i; -+ int ret; - - div = DIV_ROUND_CLOSEST(parent_rate, rate); - if (div > ARRAY_SIZE(characteristics->divisors)) -@@ -145,11 +190,24 @@ static int clk_master_div_set_rate(struc - return -EINVAL; - - spin_lock_irqsave(master->lock, flags); -- regmap_update_bits(master->regmap, master->layout->offset, -- (MASTER_DIV_MASK << MASTER_DIV_SHIFT), -- (div << MASTER_DIV_SHIFT)); -+ ret = regmap_read(master->regmap, master->layout->offset, &mckr); -+ if (ret) -+ goto unlock; -+ -+ tmp = mckr & master->layout->mask; -+ tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ if (tmp == div) -+ goto unlock; -+ -+ mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT); -+ mckr |= (div << MASTER_DIV_SHIFT); -+ ret = regmap_write(master->regmap, master->layout->offset, mckr); -+ if (ret) -+ goto unlock; -+ - while (!clk_master_ready(master)) - cpu_relax(); -+unlock: - spin_unlock_irqrestore(master->lock, flags); - - return 0; -@@ -197,12 +255,25 @@ static int clk_master_div_determine_rate - return 0; - } - -+static void clk_master_div_restore_context_chg(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ int ret; -+ -+ ret = clk_master_div_set_rate(hw, master->pms.rate, -+ master->pms.parent_rate); -+ if (ret) -+ pr_warn("Failed to restore MCK DIV clock\n"); -+} -+ - static const struct clk_ops master_div_ops_chg = { - .prepare = clk_master_prepare, - .is_prepared = clk_master_is_prepared, - .recalc_rate = clk_master_div_recalc_rate, - .determine_rate = clk_master_div_determine_rate, - .set_rate = clk_master_div_set_rate, -+ .save_context = clk_master_div_save_context, -+ .restore_context = clk_master_div_restore_context_chg, - }; - - static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, -@@ -272,7 +343,8 @@ static int clk_master_pres_set_rate(stru - { - struct clk_master *master = to_clk_master(hw); - unsigned long flags; -- unsigned int pres; -+ unsigned int pres, mckr, tmp; -+ int ret; - - pres = DIV_ROUND_CLOSEST(parent_rate, rate); - if (pres > MASTER_PRES_MAX) -@@ -284,15 +356,27 @@ static int clk_master_pres_set_rate(stru - pres = ffs(pres) - 1; - - spin_lock_irqsave(master->lock, flags); -- regmap_update_bits(master->regmap, master->layout->offset, -- (MASTER_PRES_MASK << master->layout->pres_shift), -- (pres << master->layout->pres_shift)); -+ ret = regmap_read(master->regmap, master->layout->offset, &mckr); -+ if (ret) -+ goto unlock; -+ -+ mckr &= master->layout->mask; -+ tmp = (mckr >> master->layout->pres_shift) & MASTER_PRES_MASK; -+ if (pres == tmp) -+ goto unlock; -+ -+ mckr &= ~(MASTER_PRES_MASK << master->layout->pres_shift); -+ mckr |= (pres << master->layout->pres_shift); -+ ret = regmap_write(master->regmap, master->layout->offset, mckr); -+ if (ret) -+ goto unlock; - - while (!clk_master_ready(master)) - cpu_relax(); -+unlock: - spin_unlock_irqrestore(master->lock, flags); - -- return 0; -+ return ret; - } - - static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw, -@@ -330,11 +414,68 @@ static u8 clk_master_pres_get_parent(str - return mckr & AT91_PMC_CSS; - } - -+static int clk_master_pres_save_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ struct clk_hw *parent_hw = clk_hw_get_parent(hw); -+ unsigned long flags; -+ unsigned int val, pres; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_read(master->regmap, master->layout->offset, &val); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ val &= master->layout->mask; -+ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; -+ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres) -+ pres = 3; -+ else -+ pres = (1 << pres); -+ -+ master->pms.parent = val & AT91_PMC_CSS; -+ master->pms.parent_rate = clk_hw_get_rate(parent_hw); -+ master->pms.rate = DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres); -+ -+ return 0; -+} -+ -+static void clk_master_pres_restore_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; -+ unsigned int val, pres; -+ -+ spin_lock_irqsave(master->lock, flags); -+ regmap_read(master->regmap, master->layout->offset, &val); -+ spin_unlock_irqrestore(master->lock, flags); -+ -+ val &= master->layout->mask; -+ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; -+ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres) -+ pres = 3; -+ else -+ pres = (1 << pres); -+ -+ if (master->pms.rate != -+ DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres) || -+ (master->pms.parent != (val & AT91_PMC_CSS))) -+ pr_warn("MCKR PRES was not configured properly by firmware!\n"); -+} -+ -+static void clk_master_pres_restore_context_chg(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ -+ clk_master_pres_set_rate(hw, master->pms.rate, master->pms.parent_rate); -+} -+ - static const struct clk_ops master_pres_ops = { - .prepare = clk_master_prepare, - .is_prepared = clk_master_is_prepared, - .recalc_rate = clk_master_pres_recalc_rate, - .get_parent = clk_master_pres_get_parent, -+ .save_context = clk_master_pres_save_context, -+ .restore_context = clk_master_pres_restore_context, - }; - - static const struct clk_ops master_pres_ops_chg = { -@@ -344,6 +485,8 @@ static const struct clk_ops master_pres_ - .recalc_rate = clk_master_pres_recalc_rate, - .get_parent = clk_master_pres_get_parent, - .set_rate = clk_master_pres_set_rate, -+ .save_context = clk_master_pres_save_context, -+ .restore_context = clk_master_pres_restore_context_chg, - }; - - static struct clk_hw * __init -@@ -539,20 +682,21 @@ static int clk_sama7g5_master_set_parent - return 0; - } - --static int clk_sama7g5_master_enable(struct clk_hw *hw) -+static void clk_sama7g5_master_set(struct clk_master *master, -+ unsigned int status) - { -- struct clk_master *master = to_clk_master(hw); - unsigned long flags; - unsigned int val, cparent; -+ unsigned int enable = status ? PMC_MCR_EN : 0; - - spin_lock_irqsave(master->lock, flags); - - regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id)); - regmap_read(master->regmap, PMC_MCR, &val); - regmap_update_bits(master->regmap, PMC_MCR, -- PMC_MCR_EN | PMC_MCR_CSS | PMC_MCR_DIV | -+ enable | PMC_MCR_CSS | PMC_MCR_DIV | - PMC_MCR_CMD | PMC_MCR_ID_MSK, -- PMC_MCR_EN | (master->parent << PMC_MCR_CSS_SHIFT) | -+ enable | (master->parent << PMC_MCR_CSS_SHIFT) | - (master->div << MASTER_DIV_SHIFT) | - PMC_MCR_CMD | PMC_MCR_ID(master->id)); - -@@ -563,6 +707,13 @@ static int clk_sama7g5_master_enable(str - cpu_relax(); - - spin_unlock_irqrestore(master->lock, flags); -+} -+ -+static int clk_sama7g5_master_enable(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ -+ clk_sama7g5_master_set(master, 1); - - return 0; - } -@@ -620,6 +771,23 @@ static int clk_sama7g5_master_set_rate(s - return 0; - } - -+static int clk_sama7g5_master_save_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ -+ master->pms.status = clk_sama7g5_master_is_enabled(hw); -+ -+ return 0; -+} -+ -+static void clk_sama7g5_master_restore_context(struct clk_hw *hw) -+{ -+ struct clk_master *master = to_clk_master(hw); -+ -+ if (master->pms.status) -+ clk_sama7g5_master_set(master, master->pms.status); -+} -+ - static const struct clk_ops sama7g5_master_ops = { - .enable = clk_sama7g5_master_enable, - .disable = clk_sama7g5_master_disable, -@@ -629,6 +797,8 @@ static const struct clk_ops sama7g5_mast - .set_rate = clk_sama7g5_master_set_rate, - .get_parent = clk_sama7g5_master_get_parent, - .set_parent = clk_sama7g5_master_set_parent, -+ .save_context = clk_sama7g5_master_save_context, -+ .restore_context = clk_sama7g5_master_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/clk-peripheral.c -+++ b/drivers/clk/at91/clk-peripheral.c -@@ -37,6 +37,7 @@ struct clk_sam9x5_peripheral { - u32 id; - u32 div; - const struct clk_pcr_layout *layout; -+ struct at91_clk_pms pms; - bool auto_div; - int chg_pid; - }; -@@ -155,10 +156,11 @@ static void clk_sam9x5_peripheral_autodi - periph->div = shift; - } - --static int clk_sam9x5_peripheral_enable(struct clk_hw *hw) -+static int clk_sam9x5_peripheral_set(struct clk_sam9x5_peripheral *periph, -+ unsigned int status) - { -- struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); - unsigned long flags; -+ unsigned int enable = status ? AT91_PMC_PCR_EN : 0; - - if (periph->id < PERIPHERAL_ID_MIN) - return 0; -@@ -168,15 +170,21 @@ static int clk_sam9x5_peripheral_enable( - (periph->id & periph->layout->pid_mask)); - regmap_update_bits(periph->regmap, periph->layout->offset, - periph->layout->div_mask | periph->layout->cmd | -- AT91_PMC_PCR_EN, -+ enable, - field_prep(periph->layout->div_mask, periph->div) | -- periph->layout->cmd | -- AT91_PMC_PCR_EN); -+ periph->layout->cmd | enable); - spin_unlock_irqrestore(periph->lock, flags); - - return 0; - } - -+static int clk_sam9x5_peripheral_enable(struct clk_hw *hw) -+{ -+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); -+ -+ return clk_sam9x5_peripheral_set(periph, 1); -+} -+ - static void clk_sam9x5_peripheral_disable(struct clk_hw *hw) - { - struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); -@@ -393,6 +401,23 @@ static int clk_sam9x5_peripheral_set_rat - return -EINVAL; - } - -+static int clk_sam9x5_peripheral_save_context(struct clk_hw *hw) -+{ -+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); -+ -+ periph->pms.status = clk_sam9x5_peripheral_is_enabled(hw); -+ -+ return 0; -+} -+ -+static void clk_sam9x5_peripheral_restore_context(struct clk_hw *hw) -+{ -+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw); -+ -+ if (periph->pms.status) -+ clk_sam9x5_peripheral_set(periph, periph->pms.status); -+} -+ - static const struct clk_ops sam9x5_peripheral_ops = { - .enable = clk_sam9x5_peripheral_enable, - .disable = clk_sam9x5_peripheral_disable, -@@ -400,6 +425,8 @@ static const struct clk_ops sam9x5_perip - .recalc_rate = clk_sam9x5_peripheral_recalc_rate, - .round_rate = clk_sam9x5_peripheral_round_rate, - .set_rate = clk_sam9x5_peripheral_set_rate, -+ .save_context = clk_sam9x5_peripheral_save_context, -+ .restore_context = clk_sam9x5_peripheral_restore_context, - }; - - static const struct clk_ops sam9x5_peripheral_chg_ops = { -@@ -409,6 +436,8 @@ static const struct clk_ops sam9x5_perip - .recalc_rate = clk_sam9x5_peripheral_recalc_rate, - .determine_rate = clk_sam9x5_peripheral_determine_rate, - .set_rate = clk_sam9x5_peripheral_set_rate, -+ .save_context = clk_sam9x5_peripheral_save_context, -+ .restore_context = clk_sam9x5_peripheral_restore_context, - }; - - struct clk_hw * __init -@@ -460,7 +489,6 @@ at91_clk_register_sam9x5_peripheral(stru - hw = ERR_PTR(ret); - } else { - clk_sam9x5_peripheral_autodiv(periph); -- pmc_register_id(id); - } - - return hw; ---- a/drivers/clk/at91/clk-pll.c -+++ b/drivers/clk/at91/clk-pll.c -@@ -40,6 +40,7 @@ struct clk_pll { - u16 mul; - const struct clk_pll_layout *layout; - const struct clk_pll_characteristics *characteristics; -+ struct at91_clk_pms pms; - }; - - static inline bool clk_pll_ready(struct regmap *regmap, int id) -@@ -260,6 +261,42 @@ static int clk_pll_set_rate(struct clk_h - return 0; - } - -+static int clk_pll_save_context(struct clk_hw *hw) -+{ -+ struct clk_pll *pll = to_clk_pll(hw); -+ struct clk_hw *parent_hw = clk_hw_get_parent(hw); -+ -+ pll->pms.parent_rate = clk_hw_get_rate(parent_hw); -+ pll->pms.rate = clk_pll_recalc_rate(&pll->hw, pll->pms.parent_rate); -+ pll->pms.status = clk_pll_ready(pll->regmap, PLL_REG(pll->id)); -+ -+ return 0; -+} -+ -+static void clk_pll_restore_context(struct clk_hw *hw) -+{ -+ struct clk_pll *pll = to_clk_pll(hw); -+ unsigned long calc_rate; -+ unsigned int pllr, pllr_out, pllr_count; -+ u8 out = 0; -+ -+ if (pll->characteristics->out) -+ out = pll->characteristics->out[pll->range]; -+ -+ regmap_read(pll->regmap, PLL_REG(pll->id), &pllr); -+ -+ calc_rate = (pll->pms.parent_rate / PLL_DIV(pllr)) * -+ (PLL_MUL(pllr, pll->layout) + 1); -+ pllr_count = (pllr >> PLL_COUNT_SHIFT) & PLL_MAX_COUNT; -+ pllr_out = (pllr >> PLL_OUT_SHIFT) & out; -+ -+ if (pll->pms.rate != calc_rate || -+ pll->pms.status != clk_pll_ready(pll->regmap, PLL_REG(pll->id)) || -+ pllr_count != PLL_MAX_COUNT || -+ (out && pllr_out != out)) -+ pr_warn("PLLAR was not configured properly by firmware\n"); -+} -+ - static const struct clk_ops pll_ops = { - .prepare = clk_pll_prepare, - .unprepare = clk_pll_unprepare, -@@ -267,6 +304,8 @@ static const struct clk_ops pll_ops = { - .recalc_rate = clk_pll_recalc_rate, - .round_rate = clk_pll_round_rate, - .set_rate = clk_pll_set_rate, -+ .save_context = clk_pll_save_context, -+ .restore_context = clk_pll_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/clk-programmable.c -+++ b/drivers/clk/at91/clk-programmable.c -@@ -24,6 +24,7 @@ struct clk_programmable { - u32 *mux_table; - u8 id; - const struct clk_programmable_layout *layout; -+ struct at91_clk_pms pms; - }; - - #define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw) -@@ -177,12 +178,38 @@ static int clk_programmable_set_rate(str - return 0; - } - -+static int clk_programmable_save_context(struct clk_hw *hw) -+{ -+ struct clk_programmable *prog = to_clk_programmable(hw); -+ struct clk_hw *parent_hw = clk_hw_get_parent(hw); -+ -+ prog->pms.parent = clk_programmable_get_parent(hw); -+ prog->pms.parent_rate = clk_hw_get_rate(parent_hw); -+ prog->pms.rate = clk_programmable_recalc_rate(hw, prog->pms.parent_rate); -+ -+ return 0; -+} -+ -+static void clk_programmable_restore_context(struct clk_hw *hw) -+{ -+ struct clk_programmable *prog = to_clk_programmable(hw); -+ int ret; -+ -+ ret = clk_programmable_set_parent(hw, prog->pms.parent); -+ if (ret) -+ return; -+ -+ clk_programmable_set_rate(hw, prog->pms.rate, prog->pms.parent_rate); -+} -+ - static const struct clk_ops programmable_ops = { - .recalc_rate = clk_programmable_recalc_rate, - .determine_rate = clk_programmable_determine_rate, - .get_parent = clk_programmable_get_parent, - .set_parent = clk_programmable_set_parent, - .set_rate = clk_programmable_set_rate, -+ .save_context = clk_programmable_save_context, -+ .restore_context = clk_programmable_restore_context, - }; - - struct clk_hw * __init -@@ -221,8 +248,6 @@ at91_clk_register_programmable(struct re - if (ret) { - kfree(prog); - hw = ERR_PTR(ret); -- } else { -- pmc_register_pck(id); - } - - return hw; ---- a/drivers/clk/at91/clk-sam9x60-pll.c -+++ b/drivers/clk/at91/clk-sam9x60-pll.c -@@ -38,12 +38,14 @@ struct sam9x60_pll_core { - - struct sam9x60_frac { - struct sam9x60_pll_core core; -+ struct at91_clk_pms pms; - u32 frac; - u16 mul; - }; - - struct sam9x60_div { - struct sam9x60_pll_core core; -+ struct at91_clk_pms pms; - u8 div; - }; - -@@ -75,9 +77,8 @@ static unsigned long sam9x60_frac_pll_re - DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22)); - } - --static int sam9x60_frac_pll_prepare(struct clk_hw *hw) -+static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core) - { -- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); - struct sam9x60_frac *frac = to_sam9x60_frac(core); - struct regmap *regmap = core->regmap; - unsigned int val, cfrac, cmul; -@@ -141,6 +142,13 @@ unlock: - return 0; - } - -+static int sam9x60_frac_pll_prepare(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ -+ return sam9x60_frac_pll_set(core); -+} -+ - static void sam9x60_frac_pll_unprepare(struct clk_hw *hw) - { - struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -@@ -280,6 +288,25 @@ unlock: - return ret; - } - -+static int sam9x60_frac_pll_save_context(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_frac *frac = to_sam9x60_frac(core); -+ -+ frac->pms.status = sam9x60_pll_ready(core->regmap, core->id); -+ -+ return 0; -+} -+ -+static void sam9x60_frac_pll_restore_context(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_frac *frac = to_sam9x60_frac(core); -+ -+ if (frac->pms.status) -+ sam9x60_frac_pll_set(core); -+} -+ - static const struct clk_ops sam9x60_frac_pll_ops = { - .prepare = sam9x60_frac_pll_prepare, - .unprepare = sam9x60_frac_pll_unprepare, -@@ -287,6 +314,8 @@ static const struct clk_ops sam9x60_frac - .recalc_rate = sam9x60_frac_pll_recalc_rate, - .round_rate = sam9x60_frac_pll_round_rate, - .set_rate = sam9x60_frac_pll_set_rate, -+ .save_context = sam9x60_frac_pll_save_context, -+ .restore_context = sam9x60_frac_pll_restore_context, - }; - - static const struct clk_ops sam9x60_frac_pll_ops_chg = { -@@ -296,11 +325,12 @@ static const struct clk_ops sam9x60_frac - .recalc_rate = sam9x60_frac_pll_recalc_rate, - .round_rate = sam9x60_frac_pll_round_rate, - .set_rate = sam9x60_frac_pll_set_rate_chg, -+ .save_context = sam9x60_frac_pll_save_context, -+ .restore_context = sam9x60_frac_pll_restore_context, - }; - --static int sam9x60_div_pll_prepare(struct clk_hw *hw) -+static int sam9x60_div_pll_set(struct sam9x60_pll_core *core) - { -- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); - struct sam9x60_div *div = to_sam9x60_div(core); - struct regmap *regmap = core->regmap; - unsigned long flags; -@@ -334,6 +364,13 @@ unlock: - return 0; - } - -+static int sam9x60_div_pll_prepare(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ -+ return sam9x60_div_pll_set(core); -+} -+ - static void sam9x60_div_pll_unprepare(struct clk_hw *hw) - { - struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -@@ -482,6 +519,25 @@ unlock: - return 0; - } - -+static int sam9x60_div_pll_save_context(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_div *div = to_sam9x60_div(core); -+ -+ div->pms.status = sam9x60_div_pll_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void sam9x60_div_pll_restore_context(struct clk_hw *hw) -+{ -+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); -+ struct sam9x60_div *div = to_sam9x60_div(core); -+ -+ if (div->pms.status) -+ sam9x60_div_pll_set(core); -+} -+ - static const struct clk_ops sam9x60_div_pll_ops = { - .prepare = sam9x60_div_pll_prepare, - .unprepare = sam9x60_div_pll_unprepare, -@@ -489,6 +545,8 @@ static const struct clk_ops sam9x60_div_ - .recalc_rate = sam9x60_div_pll_recalc_rate, - .round_rate = sam9x60_div_pll_round_rate, - .set_rate = sam9x60_div_pll_set_rate, -+ .save_context = sam9x60_div_pll_save_context, -+ .restore_context = sam9x60_div_pll_restore_context, - }; - - static const struct clk_ops sam9x60_div_pll_ops_chg = { -@@ -498,6 +556,8 @@ static const struct clk_ops sam9x60_div_ - .recalc_rate = sam9x60_div_pll_recalc_rate, - .round_rate = sam9x60_div_pll_round_rate, - .set_rate = sam9x60_div_pll_set_rate_chg, -+ .save_context = sam9x60_div_pll_save_context, -+ .restore_context = sam9x60_div_pll_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/clk-system.c -+++ b/drivers/clk/at91/clk-system.c -@@ -20,6 +20,7 @@ - struct clk_system { - struct clk_hw hw; - struct regmap *regmap; -+ struct at91_clk_pms pms; - u8 id; - }; - -@@ -77,10 +78,29 @@ static int clk_system_is_prepared(struct - return !!(status & (1 << sys->id)); - } - -+static int clk_system_save_context(struct clk_hw *hw) -+{ -+ struct clk_system *sys = to_clk_system(hw); -+ -+ sys->pms.status = clk_system_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void clk_system_restore_context(struct clk_hw *hw) -+{ -+ struct clk_system *sys = to_clk_system(hw); -+ -+ if (sys->pms.status) -+ clk_system_prepare(&sys->hw); -+} -+ - static const struct clk_ops system_ops = { - .prepare = clk_system_prepare, - .unprepare = clk_system_unprepare, - .is_prepared = clk_system_is_prepared, -+ .save_context = clk_system_save_context, -+ .restore_context = clk_system_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/clk-usb.c -+++ b/drivers/clk/at91/clk-usb.c -@@ -24,6 +24,7 @@ - struct at91sam9x5_clk_usb { - struct clk_hw hw; - struct regmap *regmap; -+ struct at91_clk_pms pms; - u32 usbs_mask; - u8 num_parents; - }; -@@ -148,12 +149,38 @@ static int at91sam9x5_clk_usb_set_rate(s - return 0; - } - -+static int at91sam9x5_usb_save_context(struct clk_hw *hw) -+{ -+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); -+ struct clk_hw *parent_hw = clk_hw_get_parent(hw); -+ -+ usb->pms.parent = at91sam9x5_clk_usb_get_parent(hw); -+ usb->pms.parent_rate = clk_hw_get_rate(parent_hw); -+ usb->pms.rate = at91sam9x5_clk_usb_recalc_rate(hw, usb->pms.parent_rate); -+ -+ return 0; -+} -+ -+static void at91sam9x5_usb_restore_context(struct clk_hw *hw) -+{ -+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw); -+ int ret; -+ -+ ret = at91sam9x5_clk_usb_set_parent(hw, usb->pms.parent); -+ if (ret) -+ return; -+ -+ at91sam9x5_clk_usb_set_rate(hw, usb->pms.rate, usb->pms.parent_rate); -+} -+ - static const struct clk_ops at91sam9x5_usb_ops = { - .recalc_rate = at91sam9x5_clk_usb_recalc_rate, - .determine_rate = at91sam9x5_clk_usb_determine_rate, - .get_parent = at91sam9x5_clk_usb_get_parent, - .set_parent = at91sam9x5_clk_usb_set_parent, - .set_rate = at91sam9x5_clk_usb_set_rate, -+ .save_context = at91sam9x5_usb_save_context, -+ .restore_context = at91sam9x5_usb_restore_context, - }; - - static int at91sam9n12_clk_usb_enable(struct clk_hw *hw) ---- a/drivers/clk/at91/clk-utmi.c -+++ b/drivers/clk/at91/clk-utmi.c -@@ -23,6 +23,7 @@ struct clk_utmi { - struct clk_hw hw; - struct regmap *regmap_pmc; - struct regmap *regmap_sfr; -+ struct at91_clk_pms pms; - }; - - #define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw) -@@ -113,11 +114,30 @@ static unsigned long clk_utmi_recalc_rat - return UTMI_RATE; - } - -+static int clk_utmi_save_context(struct clk_hw *hw) -+{ -+ struct clk_utmi *utmi = to_clk_utmi(hw); -+ -+ utmi->pms.status = clk_utmi_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void clk_utmi_restore_context(struct clk_hw *hw) -+{ -+ struct clk_utmi *utmi = to_clk_utmi(hw); -+ -+ if (utmi->pms.status) -+ clk_utmi_prepare(hw); -+} -+ - static const struct clk_ops utmi_ops = { - .prepare = clk_utmi_prepare, - .unprepare = clk_utmi_unprepare, - .is_prepared = clk_utmi_is_prepared, - .recalc_rate = clk_utmi_recalc_rate, -+ .save_context = clk_utmi_save_context, -+ .restore_context = clk_utmi_restore_context, - }; - - static struct clk_hw * __init -@@ -232,10 +252,29 @@ static int clk_utmi_sama7g5_is_prepared( - return 0; - } - -+static int clk_utmi_sama7g5_save_context(struct clk_hw *hw) -+{ -+ struct clk_utmi *utmi = to_clk_utmi(hw); -+ -+ utmi->pms.status = clk_utmi_sama7g5_is_prepared(hw); -+ -+ return 0; -+} -+ -+static void clk_utmi_sama7g5_restore_context(struct clk_hw *hw) -+{ -+ struct clk_utmi *utmi = to_clk_utmi(hw); -+ -+ if (utmi->pms.status) -+ clk_utmi_sama7g5_prepare(hw); -+} -+ - static const struct clk_ops sama7g5_utmi_ops = { - .prepare = clk_utmi_sama7g5_prepare, - .is_prepared = clk_utmi_sama7g5_is_prepared, - .recalc_rate = clk_utmi_recalc_rate, -+ .save_context = clk_utmi_sama7g5_save_context, -+ .restore_context = clk_utmi_sama7g5_restore_context, - }; - - struct clk_hw * __init ---- a/drivers/clk/at91/pmc.c -+++ b/drivers/clk/at91/pmc.c -@@ -3,6 +3,7 @@ - * Copyright (C) 2013 Boris BREZILLON - */ - -+#include - #include - #include - #include -@@ -14,8 +15,6 @@ - - #include - --#include -- - #include "pmc.h" - - #define PMC_MAX_IDS 128 -@@ -111,147 +110,19 @@ struct pmc_data *pmc_data_allocate(unsig - } - - #ifdef CONFIG_PM --static struct regmap *pmcreg; -- --static u8 registered_ids[PMC_MAX_IDS]; --static u8 registered_pcks[PMC_MAX_PCKS]; -- --static struct --{ -- u32 scsr; -- u32 pcsr0; -- u32 uckr; -- u32 mor; -- u32 mcfr; -- u32 pllar; -- u32 mckr; -- u32 usb; -- u32 imr; -- u32 pcsr1; -- u32 pcr[PMC_MAX_IDS]; -- u32 audio_pll0; -- u32 audio_pll1; -- u32 pckr[PMC_MAX_PCKS]; --} pmc_cache; -- --/* -- * As Peripheral ID 0 is invalid on AT91 chips, the identifier is stored -- * without alteration in the table, and 0 is for unused clocks. -- */ --void pmc_register_id(u8 id) -+static int at91_pmc_suspend(void) - { -- int i; -- -- for (i = 0; i < PMC_MAX_IDS; i++) { -- if (registered_ids[i] == 0) { -- registered_ids[i] = id; -- break; -- } -- if (registered_ids[i] == id) -- break; -- } -+ return clk_save_context(); - } - --/* -- * As Programmable Clock 0 is valid on AT91 chips, there is an offset -- * of 1 between the stored value and the real clock ID. -- */ --void pmc_register_pck(u8 pck) -+static void at91_pmc_resume(void) - { -- int i; -- -- for (i = 0; i < PMC_MAX_PCKS; i++) { -- if (registered_pcks[i] == 0) { -- registered_pcks[i] = pck + 1; -- break; -- } -- if (registered_pcks[i] == (pck + 1)) -- break; -- } --} -- --static int pmc_suspend(void) --{ -- int i; -- u8 num; -- -- regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr); -- regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0); -- regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr); -- regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor); -- regmap_read(pmcreg, AT91_CKGR_MCFR, &pmc_cache.mcfr); -- regmap_read(pmcreg, AT91_CKGR_PLLAR, &pmc_cache.pllar); -- regmap_read(pmcreg, AT91_PMC_MCKR, &pmc_cache.mckr); -- regmap_read(pmcreg, AT91_PMC_USB, &pmc_cache.usb); -- regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.imr); -- regmap_read(pmcreg, AT91_PMC_PCSR1, &pmc_cache.pcsr1); -- -- for (i = 0; registered_ids[i]; i++) { -- regmap_write(pmcreg, AT91_PMC_PCR, -- (registered_ids[i] & AT91_PMC_PCR_PID_MASK)); -- regmap_read(pmcreg, AT91_PMC_PCR, -- &pmc_cache.pcr[registered_ids[i]]); -- } -- for (i = 0; registered_pcks[i]; i++) { -- num = registered_pcks[i] - 1; -- regmap_read(pmcreg, AT91_PMC_PCKR(num), &pmc_cache.pckr[num]); -- } -- -- return 0; --} -- --static bool pmc_ready(unsigned int mask) --{ -- unsigned int status; -- -- regmap_read(pmcreg, AT91_PMC_SR, &status); -- -- return ((status & mask) == mask) ? 1 : 0; --} -- --static void pmc_resume(void) --{ -- int i; -- u8 num; -- u32 tmp; -- u32 mask = AT91_PMC_MCKRDY | AT91_PMC_LOCKA; -- -- regmap_read(pmcreg, AT91_PMC_MCKR, &tmp); -- if (pmc_cache.mckr != tmp) -- pr_warn("MCKR was not configured properly by the firmware\n"); -- regmap_read(pmcreg, AT91_CKGR_PLLAR, &tmp); -- if (pmc_cache.pllar != tmp) -- pr_warn("PLLAR was not configured properly by the firmware\n"); -- -- regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr); -- regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0); -- regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr); -- regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor); -- regmap_write(pmcreg, AT91_CKGR_MCFR, pmc_cache.mcfr); -- regmap_write(pmcreg, AT91_PMC_USB, pmc_cache.usb); -- regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.imr); -- regmap_write(pmcreg, AT91_PMC_PCER1, pmc_cache.pcsr1); -- -- for (i = 0; registered_ids[i]; i++) { -- regmap_write(pmcreg, AT91_PMC_PCR, -- pmc_cache.pcr[registered_ids[i]] | -- AT91_PMC_PCR_CMD); -- } -- for (i = 0; registered_pcks[i]; i++) { -- num = registered_pcks[i] - 1; -- regmap_write(pmcreg, AT91_PMC_PCKR(num), pmc_cache.pckr[num]); -- } -- -- if (pmc_cache.uckr & AT91_PMC_UPLLEN) -- mask |= AT91_PMC_LOCKU; -- -- while (!pmc_ready(mask)) -- cpu_relax(); -+ clk_restore_context(); - } - - static struct syscore_ops pmc_syscore_ops = { -- .suspend = pmc_suspend, -- .resume = pmc_resume, -+ .suspend = at91_pmc_suspend, -+ .resume = at91_pmc_resume, - }; - - static const struct of_device_id sama5d2_pmc_dt_ids[] = { -@@ -271,11 +142,7 @@ static int __init pmc_register_ops(void) - of_node_put(np); - return -ENODEV; - } -- -- pmcreg = device_node_to_regmap(np); - of_node_put(np); -- if (IS_ERR(pmcreg)) -- return PTR_ERR(pmcreg); - - register_syscore_ops(&pmc_syscore_ops); - ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -13,6 +13,8 @@ - #include - #include - -+#include -+ - extern spinlock_t pmc_pcr_lock; - - struct pmc_data { -@@ -98,6 +100,20 @@ struct clk_pcr_layout { - u32 pid_mask; - }; - -+/** -+ * struct at91_clk_pms - Power management state for AT91 clock -+ * @rate: clock rate -+ * @parent_rate: clock parent rate -+ * @status: clock status (enabled or disabled) -+ * @parent: clock parent index -+ */ -+struct at91_clk_pms { -+ unsigned long rate; -+ unsigned long parent_rate; -+ unsigned int status; -+ unsigned int parent; -+}; -+ - #define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1)) - #define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask)) - -@@ -248,12 +264,4 @@ struct clk_hw * __init - at91_clk_sama7g5_register_utmi(struct regmap *regmap, const char *name, - const char *parent_name); - --#ifdef CONFIG_PM --void pmc_register_id(u8 id); --void pmc_register_pck(u8 pck); --#else --static inline void pmc_register_id(u8 id) {} --static inline void pmc_register_pck(u8 pck) {} --#endif -- - #endif /* __PMC_H_ */ diff --git a/target/linux/at91/patches-5.15/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch b/target/linux/at91/patches-5.15/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch deleted file mode 100644 index 19f1f6fdf2..0000000000 --- a/target/linux/at91/patches-5.15/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 63a0c32028148e91ea91cfbf95841c4ecd69d21b Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:06 +0300 -Subject: [PATCH 235/247] clk: at91: pmc: execute suspend/resume only for - backup mode - -Before going to backup mode architecture specific PM code sets the first -word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()). -Thus take this into account when suspending/resuming clocks. This will -avoid executing unnecessary instructions when suspending to non backup -modes. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-3-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/pmc.c | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - ---- a/drivers/clk/at91/pmc.c -+++ b/drivers/clk/at91/pmc.c -@@ -8,6 +8,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -110,13 +111,35 @@ struct pmc_data *pmc_data_allocate(unsig - } - - #ifdef CONFIG_PM -+ -+/* Address in SECURAM that say if we suspend to backup mode. */ -+static void __iomem *at91_pmc_backup_suspend; -+ - static int at91_pmc_suspend(void) - { -+ unsigned int backup; -+ -+ if (!at91_pmc_backup_suspend) -+ return 0; -+ -+ backup = readl_relaxed(at91_pmc_backup_suspend); -+ if (!backup) -+ return 0; -+ - return clk_save_context(); - } - - static void at91_pmc_resume(void) - { -+ unsigned int backup; -+ -+ if (!at91_pmc_backup_suspend) -+ return; -+ -+ backup = readl_relaxed(at91_pmc_backup_suspend); -+ if (!backup) -+ return; -+ - clk_restore_context(); - } - -@@ -144,6 +167,22 @@ static int __init pmc_register_ops(void) - } - of_node_put(np); - -+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); -+ if (!np) -+ return -ENODEV; -+ -+ if (!of_device_is_available(np)) { -+ of_node_put(np); -+ return -ENODEV; -+ } -+ of_node_put(np); -+ -+ at91_pmc_backup_suspend = of_iomap(np, 0); -+ if (!at91_pmc_backup_suspend) { -+ pr_warn("%s(): unable to map securam\n", __func__); -+ return -ENOMEM; -+ } -+ - register_syscore_ops(&pmc_syscore_ops); - - return 0; diff --git a/target/linux/at91/patches-5.15/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch b/target/linux/at91/patches-5.15/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch deleted file mode 100644 index 046acec453..0000000000 --- a/target/linux/at91/patches-5.15/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 50edd53c26177e95995533b7d649801086a52f6c Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:07 +0300 -Subject: [PATCH 236/247] clk: at91: sama7g5: add securam's peripheral clock - -Add SECURAM's peripheral clock. - -Signed-off-by: Claudiu Beznea -Acked-by: Nicolas Ferre -Link: https://lore.kernel.org/r/20211011112719.3951784-4-claudiu.beznea@microchip.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -377,6 +377,7 @@ static const struct { - u8 id; - } sama7g5_periphck[] = { - { .n = "pioA_clk", .p = "mck0", .id = 11, }, -+ { .n = "securam_clk", .p = "mck0", .id = 18, }, - { .n = "sfr_clk", .p = "mck1", .id = 19, }, - { .n = "hsmc_clk", .p = "mck1", .id = 21, }, - { .n = "xdmac0_clk", .p = "mck1", .id = 22, }, diff --git a/target/linux/at91/patches-5.15/237-clk-at91-clk-master-add-register-definition-for-sama.patch b/target/linux/at91/patches-5.15/237-clk-at91-clk-master-add-register-definition-for-sama.patch deleted file mode 100644 index 726d9b33e4..0000000000 --- a/target/linux/at91/patches-5.15/237-clk-at91-clk-master-add-register-definition-for-sama.patch +++ /dev/null @@ -1,124 +0,0 @@ -From c716562753d1e51a1c53647aa77a332f97187d15 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:08 +0300 -Subject: [PATCH 237/247] clk: at91: clk-master: add register definition for - sama7g5's master clock - -SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the -register at offset 0x30 (relative to PMC). In the last/first phase of -suspend/resume procedure (which is architecture specific) the parent -of master clocks are changed (via assembly code) for more power saving -(see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable -and at91_mckx_ps_restore). Thus the macros corresponding to register -at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S. -commit ec03f18cc222 ("clk: at91: add register definition for sama7g5's -master clock") introduced the proper macros but didn't adapted the -clk-master.c as well. Thus, this commit adapt the clk-master.c to use -the macros introduced in commit ec03f18cc222 ("clk: at91: add register -definition for sama7g5's master clock"). - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-5-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 50 ++++++++++++++++------------------- - 1 file changed, 23 insertions(+), 27 deletions(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -17,15 +17,7 @@ - #define MASTER_DIV_SHIFT 8 - #define MASTER_DIV_MASK 0x7 - --#define PMC_MCR 0x30 --#define PMC_MCR_ID_MSK GENMASK(3, 0) --#define PMC_MCR_CMD BIT(7) --#define PMC_MCR_DIV GENMASK(10, 8) --#define PMC_MCR_CSS GENMASK(20, 16) - #define PMC_MCR_CSS_SHIFT (16) --#define PMC_MCR_EN BIT(28) -- --#define PMC_MCR_ID(x) ((x) & PMC_MCR_ID_MSK) - - #define MASTER_MAX_ID 4 - -@@ -687,20 +679,22 @@ static void clk_sama7g5_master_set(struc - { - unsigned long flags; - unsigned int val, cparent; -- unsigned int enable = status ? PMC_MCR_EN : 0; -+ unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0; - - spin_lock_irqsave(master->lock, flags); - -- regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id)); -- regmap_read(master->regmap, PMC_MCR, &val); -- regmap_update_bits(master->regmap, PMC_MCR, -- enable | PMC_MCR_CSS | PMC_MCR_DIV | -- PMC_MCR_CMD | PMC_MCR_ID_MSK, -+ regmap_write(master->regmap, AT91_PMC_MCR_V2, -+ AT91_PMC_MCR_V2_ID(master->id)); -+ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); -+ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, -+ enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV | -+ AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK, - enable | (master->parent << PMC_MCR_CSS_SHIFT) | - (master->div << MASTER_DIV_SHIFT) | -- PMC_MCR_CMD | PMC_MCR_ID(master->id)); -+ AT91_PMC_MCR_V2_CMD | -+ AT91_PMC_MCR_V2_ID(master->id)); - -- cparent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT; -+ cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; - - /* Wait here only if parent is being changed. */ - while ((cparent != master->parent) && !clk_master_ready(master)) -@@ -725,10 +719,12 @@ static void clk_sama7g5_master_disable(s - - spin_lock_irqsave(master->lock, flags); - -- regmap_write(master->regmap, PMC_MCR, master->id); -- regmap_update_bits(master->regmap, PMC_MCR, -- PMC_MCR_EN | PMC_MCR_CMD | PMC_MCR_ID_MSK, -- PMC_MCR_CMD | PMC_MCR_ID(master->id)); -+ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); -+ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, -+ AT91_PMC_MCR_V2_EN | AT91_PMC_MCR_V2_CMD | -+ AT91_PMC_MCR_V2_ID_MSK, -+ AT91_PMC_MCR_V2_CMD | -+ AT91_PMC_MCR_V2_ID(master->id)); - - spin_unlock_irqrestore(master->lock, flags); - } -@@ -741,12 +737,12 @@ static int clk_sama7g5_master_is_enabled - - spin_lock_irqsave(master->lock, flags); - -- regmap_write(master->regmap, PMC_MCR, master->id); -- regmap_read(master->regmap, PMC_MCR, &val); -+ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); -+ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); - - spin_unlock_irqrestore(master->lock, flags); - -- return !!(val & PMC_MCR_EN); -+ return !!(val & AT91_PMC_MCR_V2_EN); - } - - static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate, -@@ -842,10 +838,10 @@ at91_clk_sama7g5_register_master(struct - master->mux_table = mux_table; - - spin_lock_irqsave(master->lock, flags); -- regmap_write(master->regmap, PMC_MCR, master->id); -- regmap_read(master->regmap, PMC_MCR, &val); -- master->parent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT; -- master->div = (val & PMC_MCR_DIV) >> MASTER_DIV_SHIFT; -+ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id); -+ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val); -+ master->parent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; -+ master->div = (val & AT91_PMC_MCR_V2_DIV) >> MASTER_DIV_SHIFT; - spin_unlock_irqrestore(master->lock, flags); - - hw = &master->hw; diff --git a/target/linux/at91/patches-5.15/238-clk-at91-clk-master-improve-readability-by-using-loc.patch b/target/linux/at91/patches-5.15/238-clk-at91-clk-master-improve-readability-by-using-loc.patch deleted file mode 100644 index a5b57a67ad..0000000000 --- a/target/linux/at91/patches-5.15/238-clk-at91-clk-master-improve-readability-by-using-loc.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 17b53ad1574cb5f41789993289d3d94f7a50f0ce Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:09 +0300 -Subject: [PATCH 238/247] clk: at91: clk-master: improve readability by using - local variables - -Improve readability in clk_sama7g5_master_set() by using local -variables. - -Suggested-by: Nicolas Ferre -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-6-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -680,6 +680,8 @@ static void clk_sama7g5_master_set(struc - unsigned long flags; - unsigned int val, cparent; - unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0; -+ unsigned int parent = master->parent << PMC_MCR_CSS_SHIFT; -+ unsigned int div = master->div << MASTER_DIV_SHIFT; - - spin_lock_irqsave(master->lock, flags); - -@@ -689,9 +691,7 @@ static void clk_sama7g5_master_set(struc - regmap_update_bits(master->regmap, AT91_PMC_MCR_V2, - enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV | - AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK, -- enable | (master->parent << PMC_MCR_CSS_SHIFT) | -- (master->div << MASTER_DIV_SHIFT) | -- AT91_PMC_MCR_V2_CMD | -+ enable | parent | div | AT91_PMC_MCR_V2_CMD | - AT91_PMC_MCR_V2_ID(master->id)); - - cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT; diff --git a/target/linux/at91/patches-5.15/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch b/target/linux/at91/patches-5.15/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch deleted file mode 100644 index 2918de1700..0000000000 --- a/target/linux/at91/patches-5.15/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 8a38e0dda46c9d941a61d8b2e6c14704531b7871 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:10 +0300 -Subject: [PATCH 239/247] clk: at91: pmc: add sama7g5 to the list of available - pmcs - -Add SAMA7G5 to the list of available PMCs such that the suspend/resume -code for clocks to be used on backup mode. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-7-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/pmc.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/pmc.c -+++ b/drivers/clk/at91/pmc.c -@@ -148,8 +148,9 @@ static struct syscore_ops pmc_syscore_op - .resume = at91_pmc_resume, - }; - --static const struct of_device_id sama5d2_pmc_dt_ids[] = { -+static const struct of_device_id pmc_dt_ids[] = { - { .compatible = "atmel,sama5d2-pmc" }, -+ { .compatible = "microchip,sama7g5-pmc", }, - { /* sentinel */ } - }; - -@@ -157,7 +158,7 @@ static int __init pmc_register_ops(void) - { - struct device_node *np; - -- np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids); -+ np = of_find_matching_node(NULL, pmc_dt_ids); - if (!np) - return -ENODEV; - diff --git a/target/linux/at91/patches-5.15/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch b/target/linux/at91/patches-5.15/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch deleted file mode 100644 index c78883c8d6..0000000000 --- a/target/linux/at91/patches-5.15/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch +++ /dev/null @@ -1,39 +0,0 @@ -From bb8e6ca274763fa98613dbe8b0833348a1d8fe4d Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:12 +0300 -Subject: [PATCH 240/247] clk: at91: clk-master: check if div or pres is zero - -Check if div or pres is zero before using it as argument for ffs(). -In case div is zero ffs() will return 0 and thus substracting from -zero will lead to invalid values to be setup in registers. - -Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock") -Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5") -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -344,7 +344,7 @@ static int clk_master_pres_set_rate(stru - - else if (pres == 3) - pres = MASTER_PRES_MAX; -- else -+ else if (pres) - pres = ffs(pres) - 1; - - spin_lock_irqsave(master->lock, flags); -@@ -757,7 +757,7 @@ static int clk_sama7g5_master_set_rate(s - - if (div == 3) - div = MASTER_PRES_MAX; -- else -+ else if (div) - div = ffs(div) - 1; - - spin_lock_irqsave(master->lock, flags); diff --git a/target/linux/at91/patches-5.15/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch b/target/linux/at91/patches-5.15/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch deleted file mode 100644 index 14fa690769..0000000000 --- a/target/linux/at91/patches-5.15/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 27c11c09346b7b9f67eeb39db1b943f4a9742ff3 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:13 +0300 -Subject: [PATCH 241/247] clk: at91: clk-master: mask mckr against layout->mask - -Mask values read/written from/to MCKR against layout->mask as this -mask may be different b/w PMC versions. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-10-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -186,8 +186,8 @@ static int clk_master_div_set_rate(struc - if (ret) - goto unlock; - -- tmp = mckr & master->layout->mask; -- tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ mckr &= master->layout->mask; -+ tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; - if (tmp == div) - goto unlock; - -@@ -384,6 +384,7 @@ static unsigned long clk_master_pres_rec - regmap_read(master->regmap, master->layout->offset, &val); - spin_unlock_irqrestore(master->lock, flags); - -+ val &= master->layout->mask; - pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; - if (pres == 3 && characteristics->have_div3_pres) - pres = 3; -@@ -403,6 +404,8 @@ static u8 clk_master_pres_get_parent(str - regmap_read(master->regmap, master->layout->offset, &mckr); - spin_unlock_irqrestore(master->lock, flags); - -+ mckr &= master->layout->mask; -+ - return mckr & AT91_PMC_CSS; - } - diff --git a/target/linux/at91/patches-5.15/242-clk-at91-clk-master-fix-prescaler-logic.patch b/target/linux/at91/patches-5.15/242-clk-at91-clk-master-fix-prescaler-logic.patch deleted file mode 100644 index 950ca26afd..0000000000 --- a/target/linux/at91/patches-5.15/242-clk-at91-clk-master-fix-prescaler-logic.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4375cd63b55860f5e82618dc5f50846b3129842a Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:14 +0300 -Subject: [PATCH 242/247] clk: at91: clk-master: fix prescaler logic - -When prescaler value read from register is MASTER_PRES_MAX it means -that the input clock will be divided by 3. Fix the code to reflect -this. - -Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock") -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-11-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-master.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -386,7 +386,7 @@ static unsigned long clk_master_pres_rec - - val &= master->layout->mask; - pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK; -- if (pres == 3 && characteristics->have_div3_pres) -+ if (pres == MASTER_PRES_MAX && characteristics->have_div3_pres) - pres = 3; - else - pres = (1 << pres); diff --git a/target/linux/at91/patches-5.15/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch b/target/linux/at91/patches-5.15/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch deleted file mode 100644 index 678303da37..0000000000 --- a/target/linux/at91/patches-5.15/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch +++ /dev/null @@ -1,312 +0,0 @@ -From e76d2af5009f52aa02d3db7ae32d150ad66398f9 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:15 +0300 -Subject: [PATCH 243/247] clk: at91: clk-sam9x60-pll: add notifier for div part - of PLL - -SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: -one fractional part and one divider. On SAMA7G5 the CPU PLL could be -changed at run-time to implement DVFS. The hardware clock tree on -SAMA7G5 for CPU PLL is as follows: - - +---- div1 ----------------> cpuck - | -FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 - -The div1 block is not implemented in Linux; on prescaler block it has -been discovered a bug on some scenarios and will be removed from Linux -in next commits. Thus, the final clock tree that will be used in Linux -will be as follows: - - +-----------> cpuck - | -FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 - -It has been proposed in [1] to not introduce a new CPUFreq driver but -to overload the proper clock drivers with proper operation such that -cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement -clock notifiers which applies safe dividers before FRAC PLL is changed. -The current commit treats only the DIV PLL by adding a notifier that -sets a safe divider on PRE_RATE_CHANGE events. The safe divider is -provided by initialization clock code (sama7g5.c). The div0 is treated -in next commits (to keep the changes as clean as possible). - -[1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/ - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/clk-sam9x60-pll.c | 102 ++++++++++++++++++++++------- - drivers/clk/at91/pmc.h | 3 +- - drivers/clk/at91/sam9x60.c | 6 +- - drivers/clk/at91/sama7g5.c | 13 +++- - 4 files changed, 95 insertions(+), 29 deletions(-) - ---- a/drivers/clk/at91/clk-sam9x60-pll.c -+++ b/drivers/clk/at91/clk-sam9x60-pll.c -@@ -5,6 +5,7 @@ - */ - - #include -+#include - #include - #include - #include -@@ -47,12 +48,15 @@ struct sam9x60_div { - struct sam9x60_pll_core core; - struct at91_clk_pms pms; - u8 div; -+ u8 safe_div; - }; - - #define to_sam9x60_pll_core(hw) container_of(hw, struct sam9x60_pll_core, hw) - #define to_sam9x60_frac(core) container_of(core, struct sam9x60_frac, core) - #define to_sam9x60_div(core) container_of(core, struct sam9x60_div, core) - -+static struct sam9x60_div *notifier_div; -+ - static inline bool sam9x60_pll_ready(struct regmap *regmap, int id) - { - unsigned int status; -@@ -329,6 +333,26 @@ static const struct clk_ops sam9x60_frac - .restore_context = sam9x60_frac_pll_restore_context, - }; - -+/* This function should be called with spinlock acquired. */ -+static void sam9x60_div_pll_set_div(struct sam9x60_pll_core *core, u32 div, -+ bool enable) -+{ -+ struct regmap *regmap = core->regmap; -+ u32 ena_msk = enable ? core->layout->endiv_mask : 0; -+ u32 ena_val = enable ? (1 << core->layout->endiv_shift) : 0; -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, -+ core->layout->div_mask | ena_msk, -+ (div << core->layout->div_shift) | ena_val); -+ -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -+ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -+ AT91_PMC_PLL_UPDT_UPDATE | core->id); -+ -+ while (!sam9x60_pll_ready(regmap, core->id)) -+ cpu_relax(); -+} -+ - static int sam9x60_div_pll_set(struct sam9x60_pll_core *core) - { - struct sam9x60_div *div = to_sam9x60_div(core); -@@ -346,17 +370,7 @@ static int sam9x60_div_pll_set(struct sa - if (!!(val & core->layout->endiv_mask) && cdiv == div->div) - goto unlock; - -- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, -- core->layout->div_mask | core->layout->endiv_mask, -- (div->div << core->layout->div_shift) | -- (1 << core->layout->endiv_shift)); -- -- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -- AT91_PMC_PLL_UPDT_UPDATE | core->id); -- -- while (!sam9x60_pll_ready(regmap, core->id)) -- cpu_relax(); -+ sam9x60_div_pll_set_div(core, div->div, 1); - - unlock: - spin_unlock_irqrestore(core->lock, flags); -@@ -502,16 +516,7 @@ static int sam9x60_div_pll_set_rate_chg( - if (cdiv == div->div) - goto unlock; - -- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, -- core->layout->div_mask, -- (div->div << core->layout->div_shift)); -- -- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, -- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, -- AT91_PMC_PLL_UPDT_UPDATE | core->id); -- -- while (!sam9x60_pll_ready(regmap, core->id)) -- cpu_relax(); -+ sam9x60_div_pll_set_div(core, div->div, 0); - - unlock: - spin_unlock_irqrestore(core->lock, irqflags); -@@ -538,6 +543,48 @@ static void sam9x60_div_pll_restore_cont - sam9x60_div_pll_set(core); - } - -+static int sam9x60_div_pll_notifier_fn(struct notifier_block *notifier, -+ unsigned long code, void *data) -+{ -+ struct sam9x60_div *div = notifier_div; -+ struct sam9x60_pll_core core = div->core; -+ struct regmap *regmap = core.regmap; -+ unsigned long irqflags; -+ u32 val, cdiv; -+ int ret = NOTIFY_DONE; -+ -+ if (code != PRE_RATE_CHANGE) -+ return ret; -+ -+ /* -+ * We switch to safe divider to avoid overclocking of other domains -+ * feed by us while the frac PLL (our parent) is changed. -+ */ -+ div->div = div->safe_div; -+ -+ spin_lock_irqsave(core.lock, irqflags); -+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, -+ core.id); -+ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val); -+ cdiv = (val & core.layout->div_mask) >> core.layout->div_shift; -+ -+ /* Stop if nothing changed. */ -+ if (cdiv == div->safe_div) -+ goto unlock; -+ -+ sam9x60_div_pll_set_div(&core, div->div, 0); -+ ret = NOTIFY_OK; -+ -+unlock: -+ spin_unlock_irqrestore(core.lock, irqflags); -+ -+ return ret; -+} -+ -+static struct notifier_block sam9x60_div_pll_notifier = { -+ .notifier_call = sam9x60_div_pll_notifier_fn, -+}; -+ - static const struct clk_ops sam9x60_div_pll_ops = { - .prepare = sam9x60_div_pll_prepare, - .unprepare = sam9x60_div_pll_unprepare, -@@ -647,7 +694,8 @@ struct clk_hw * __init - sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, u32 flags) -+ const struct clk_pll_layout *layout, u32 flags, -+ u32 safe_div) - { - struct sam9x60_div *div; - struct clk_hw *hw; -@@ -656,9 +704,13 @@ sam9x60_clk_register_div_pll(struct regm - unsigned int val; - int ret; - -- if (id > PLL_MAX_ID || !lock) -+ /* We only support one changeable PLL. */ -+ if (id > PLL_MAX_ID || !lock || (safe_div && notifier_div)) - return ERR_PTR(-EINVAL); - -+ if (safe_div >= PLL_DIV_MAX) -+ safe_div = PLL_DIV_MAX - 1; -+ - div = kzalloc(sizeof(*div), GFP_KERNEL); - if (!div) - return ERR_PTR(-ENOMEM); -@@ -678,6 +730,7 @@ sam9x60_clk_register_div_pll(struct regm - div->core.layout = layout; - div->core.regmap = regmap; - div->core.lock = lock; -+ div->safe_div = safe_div; - - spin_lock_irqsave(div->core.lock, irqflags); - -@@ -693,6 +746,9 @@ sam9x60_clk_register_div_pll(struct regm - if (ret) { - kfree(div); - hw = ERR_PTR(ret); -+ } else if (div->safe_div) { -+ notifier_div = div; -+ clk_notifier_register(hw->clk, &sam9x60_div_pll_notifier); - } - - return hw; ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -214,7 +214,8 @@ struct clk_hw * __init - sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, - const char *name, const char *parent_name, u8 id, - const struct clk_pll_characteristics *characteristics, -- const struct clk_pll_layout *layout, u32 flags); -+ const struct clk_pll_layout *layout, u32 flags, -+ u32 safe_div); - - struct clk_hw * __init - sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock, ---- a/drivers/clk/at91/sam9x60.c -+++ b/drivers/clk/at91/sam9x60.c -@@ -242,7 +242,7 @@ static void __init sam9x60_pmc_setup(str - * This feeds CPU. It should not - * be disabled. - */ -- CLK_IS_CRITICAL | CLK_SET_RATE_GATE); -+ CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - -@@ -260,7 +260,7 @@ static void __init sam9x60_pmc_setup(str - &pll_div_layout, - CLK_SET_RATE_GATE | - CLK_SET_PARENT_GATE | -- CLK_SET_RATE_PARENT); -+ CLK_SET_RATE_PARENT, 0); - if (IS_ERR(hw)) - goto err_free; - -@@ -279,7 +279,7 @@ static void __init sam9x60_pmc_setup(str - hw = at91_clk_register_master_div(regmap, "masterck_div", - "masterck_pres", &sam9x60_master_layout, - &mck_characteristics, &mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -127,6 +127,8 @@ static const struct clk_pll_characterist - * @t: clock type - * @f: clock flags - * @eid: export index in sama7g5->chws[] array -+ * @safe_div: intermediate divider need to be set on PRE_RATE_CHANGE -+ * notification - */ - static const struct { - const char *n; -@@ -136,6 +138,7 @@ static const struct { - unsigned long f; - u8 t; - u8 eid; -+ u8 safe_div; - } sama7g5_plls[][PLL_ID_MAX] = { - [PLL_ID_CPU] = { - { .n = "cpupll_fracck", -@@ -156,7 +159,12 @@ static const struct { - .t = PLL_TYPE_DIV, - /* This feeds CPU. It should not be disabled. */ - .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, -- .eid = PMC_CPUPLL, }, -+ .eid = PMC_CPUPLL, -+ /* -+ * Safe div=15 should be safe even for switching b/w 1GHz and -+ * 90MHz (frac pll might go up to 1.2GHz). -+ */ -+ .safe_div = 15, }, - }, - - [PLL_ID_SYS] = { -@@ -967,7 +975,8 @@ static void __init sama7g5_pmc_setup(str - sama7g5_plls[i][j].p, i, - sama7g5_plls[i][j].c, - sama7g5_plls[i][j].l, -- sama7g5_plls[i][j].f); -+ sama7g5_plls[i][j].f, -+ sama7g5_plls[i][j].safe_div); - break; - - default: diff --git a/target/linux/at91/patches-5.15/244-clk-at91-clk-master-add-notifier-for-divider.patch b/target/linux/at91/patches-5.15/244-clk-at91-clk-master-add-notifier-for-divider.patch deleted file mode 100644 index 35262db6cb..0000000000 --- a/target/linux/at91/patches-5.15/244-clk-at91-clk-master-add-notifier-for-divider.patch +++ /dev/null @@ -1,519 +0,0 @@ -From 75d5d1d584ae73ba0c36d1d7255db6153ca4d3f3 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:16 +0300 -Subject: [PATCH 244/247] clk: at91: clk-master: add notifier for divider - -SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same -parent with cpuck as seen in the following clock tree: - - +----------> cpuck - | -FRAC PLL ---> DIV PLL -+-> DIV ---> mck0 - -mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking -while changing FRAC PLL or DIV PLL the commit implements a notifier for -mck0 which applies a safe divider to register (maximum value of the divider -which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not -overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE -events. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/at91rm9200.c | 2 +- - drivers/clk/at91/at91sam9260.c | 2 +- - drivers/clk/at91/at91sam9g45.c | 2 +- - drivers/clk/at91/at91sam9n12.c | 2 +- - drivers/clk/at91/at91sam9rl.c | 2 +- - drivers/clk/at91/at91sam9x5.c | 2 +- - drivers/clk/at91/clk-master.c | 244 +++++++++++++++++++++++---------- - drivers/clk/at91/dt-compat.c | 2 +- - drivers/clk/at91/pmc.h | 2 +- - drivers/clk/at91/sama5d2.c | 2 +- - drivers/clk/at91/sama5d3.c | 2 +- - drivers/clk/at91/sama5d4.c | 2 +- - drivers/clk/at91/sama7g5.c | 2 +- - 13 files changed, 186 insertions(+), 82 deletions(-) - ---- a/drivers/clk/at91/at91rm9200.c -+++ b/drivers/clk/at91/at91rm9200.c -@@ -152,7 +152,7 @@ static void __init at91rm9200_pmc_setup( - "masterck_pres", - &at91rm9200_master_layout, - &rm9200_mck_characteristics, -- &rm9200_mck_lock, CLK_SET_RATE_GATE); -+ &rm9200_mck_lock, CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/at91sam9260.c -+++ b/drivers/clk/at91/at91sam9260.c -@@ -429,7 +429,7 @@ static void __init at91sam926x_pmc_setup - &at91rm9200_master_layout, - data->mck_characteristics, - &at91sam9260_mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/at91sam9g45.c -+++ b/drivers/clk/at91/at91sam9g45.c -@@ -164,7 +164,7 @@ static void __init at91sam9g45_pmc_setup - &at91rm9200_master_layout, - &mck_characteristics, - &at91sam9g45_mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/at91sam9n12.c -+++ b/drivers/clk/at91/at91sam9n12.c -@@ -191,7 +191,7 @@ static void __init at91sam9n12_pmc_setup - &at91sam9x5_master_layout, - &mck_characteristics, - &at91sam9n12_mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/at91sam9rl.c -+++ b/drivers/clk/at91/at91sam9rl.c -@@ -132,7 +132,7 @@ static void __init at91sam9rl_pmc_setup( - "masterck_pres", - &at91rm9200_master_layout, - &sam9rl_mck_characteristics, -- &sam9rl_mck_lock, CLK_SET_RATE_GATE); -+ &sam9rl_mck_lock, CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/at91sam9x5.c -+++ b/drivers/clk/at91/at91sam9x5.c -@@ -210,7 +210,7 @@ static void __init at91sam9x5_pmc_setup( - "masterck_pres", - &at91sam9x5_master_layout, - &mck_characteristics, &mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/clk-master.c -+++ b/drivers/clk/at91/clk-master.c -@@ -5,6 +5,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -36,8 +37,12 @@ struct clk_master { - u8 id; - u8 parent; - u8 div; -+ u32 safe_div; - }; - -+/* MCK div reference to be used by notifier. */ -+static struct clk_master *master_div; -+ - static inline bool clk_master_ready(struct clk_master *master) - { - unsigned int bit = master->id ? AT91_PMC_MCKXRDY : AT91_PMC_MCKRDY; -@@ -153,107 +158,81 @@ static const struct clk_ops master_div_o - .restore_context = clk_master_div_restore_context, - }; - --static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate, -- unsigned long parent_rate) -+/* This function must be called with lock acquired. */ -+static int clk_master_div_set(struct clk_master *master, -+ unsigned long parent_rate, int div) - { -- struct clk_master *master = to_clk_master(hw); - const struct clk_master_characteristics *characteristics = - master->characteristics; -- unsigned long flags; -- unsigned int mckr, tmp; -- int div, i; -+ unsigned long rate = parent_rate; -+ unsigned int max_div = 0, div_index = 0, max_div_index = 0; -+ unsigned int i, mckr, tmp; - int ret; - -- div = DIV_ROUND_CLOSEST(parent_rate, rate); -- if (div > ARRAY_SIZE(characteristics->divisors)) -- return -EINVAL; -- - for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { - if (!characteristics->divisors[i]) - break; - -- if (div == characteristics->divisors[i]) { -- div = i; -- break; -+ if (div == characteristics->divisors[i]) -+ div_index = i; -+ -+ if (max_div < characteristics->divisors[i]) { -+ max_div = characteristics->divisors[i]; -+ max_div_index = i; - } - } - -- if (i == ARRAY_SIZE(characteristics->divisors)) -- return -EINVAL; -+ if (div > max_div) -+ div_index = max_div_index; - -- spin_lock_irqsave(master->lock, flags); - ret = regmap_read(master->regmap, master->layout->offset, &mckr); - if (ret) -- goto unlock; -+ return ret; - - mckr &= master->layout->mask; - tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -- if (tmp == div) -- goto unlock; -+ if (tmp == div_index) -+ return 0; -+ -+ rate /= characteristics->divisors[div_index]; -+ if (rate < characteristics->output.min) -+ pr_warn("master clk div is underclocked"); -+ else if (rate > characteristics->output.max) -+ pr_warn("master clk div is overclocked"); - - mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT); -- mckr |= (div << MASTER_DIV_SHIFT); -+ mckr |= (div_index << MASTER_DIV_SHIFT); - ret = regmap_write(master->regmap, master->layout->offset, mckr); - if (ret) -- goto unlock; -+ return ret; - - while (!clk_master_ready(master)) - cpu_relax(); --unlock: -- spin_unlock_irqrestore(master->lock, flags); -+ -+ master->div = characteristics->divisors[div_index]; - - return 0; - } - --static int clk_master_div_determine_rate(struct clk_hw *hw, -- struct clk_rate_request *req) -+static unsigned long clk_master_div_recalc_rate_chg(struct clk_hw *hw, -+ unsigned long parent_rate) - { - struct clk_master *master = to_clk_master(hw); -- const struct clk_master_characteristics *characteristics = -- master->characteristics; -- struct clk_hw *parent; -- unsigned long parent_rate, tmp_rate, best_rate = 0; -- int i, best_diff = INT_MIN, tmp_diff; -- -- parent = clk_hw_get_parent(hw); -- if (!parent) -- return -EINVAL; -- -- parent_rate = clk_hw_get_rate(parent); -- if (!parent_rate) -- return -EINVAL; - -- for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { -- if (!characteristics->divisors[i]) -- break; -- -- tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate, -- characteristics->divisors[i]); -- tmp_diff = abs(tmp_rate - req->rate); -- -- if (!best_rate || best_diff > tmp_diff) { -- best_diff = tmp_diff; -- best_rate = tmp_rate; -- } -- -- if (!best_diff) -- break; -- } -- -- req->best_parent_rate = best_rate; -- req->best_parent_hw = parent; -- req->rate = best_rate; -- -- return 0; -+ return DIV_ROUND_CLOSEST_ULL(parent_rate, master->div); - } - - static void clk_master_div_restore_context_chg(struct clk_hw *hw) - { - struct clk_master *master = to_clk_master(hw); -+ unsigned long flags; - int ret; - -- ret = clk_master_div_set_rate(hw, master->pms.rate, -- master->pms.parent_rate); -+ spin_lock_irqsave(master->lock, flags); -+ ret = clk_master_div_set(master, master->pms.parent_rate, -+ DIV_ROUND_CLOSEST(master->pms.parent_rate, -+ master->pms.rate)); -+ spin_unlock_irqrestore(master->lock, flags); - if (ret) - pr_warn("Failed to restore MCK DIV clock\n"); - } -@@ -261,13 +240,116 @@ static void clk_master_div_restore_conte - static const struct clk_ops master_div_ops_chg = { - .prepare = clk_master_prepare, - .is_prepared = clk_master_is_prepared, -- .recalc_rate = clk_master_div_recalc_rate, -- .determine_rate = clk_master_div_determine_rate, -- .set_rate = clk_master_div_set_rate, -+ .recalc_rate = clk_master_div_recalc_rate_chg, - .save_context = clk_master_div_save_context, - .restore_context = clk_master_div_restore_context_chg, - }; - -+static int clk_master_div_notifier_fn(struct notifier_block *notifier, -+ unsigned long code, void *data) -+{ -+ const struct clk_master_characteristics *characteristics = -+ master_div->characteristics; -+ struct clk_notifier_data *cnd = data; -+ unsigned long flags, new_parent_rate, new_rate; -+ unsigned int mckr, div, new_div = 0; -+ int ret, i; -+ long tmp_diff; -+ long best_diff = -1; -+ -+ spin_lock_irqsave(master_div->lock, flags); -+ switch (code) { -+ case PRE_RATE_CHANGE: -+ /* -+ * We want to avoid any overclocking of MCK DIV domain. To do -+ * this we set a safe divider (the underclocking is not of -+ * interest as we can go as low as 32KHz). The relation -+ * b/w this clock and its parents are as follows: -+ * -+ * FRAC PLL -> DIV PLL -> MCK DIV -+ * -+ * With the proper safe divider we should be good even with FRAC -+ * PLL at its maximum value. -+ */ -+ ret = regmap_read(master_div->regmap, master_div->layout->offset, -+ &mckr); -+ if (ret) { -+ ret = NOTIFY_STOP_MASK; -+ goto unlock; -+ } -+ -+ mckr &= master_div->layout->mask; -+ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ -+ /* Switch to safe divider. */ -+ clk_master_div_set(master_div, -+ cnd->old_rate * characteristics->divisors[div], -+ master_div->safe_div); -+ break; -+ -+ case POST_RATE_CHANGE: -+ /* -+ * At this point we want to restore MCK DIV domain to its maximum -+ * allowed rate. -+ */ -+ ret = regmap_read(master_div->regmap, master_div->layout->offset, -+ &mckr); -+ if (ret) { -+ ret = NOTIFY_STOP_MASK; -+ goto unlock; -+ } -+ -+ mckr &= master_div->layout->mask; -+ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ new_parent_rate = cnd->new_rate * characteristics->divisors[div]; -+ -+ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) { -+ if (!characteristics->divisors[i]) -+ break; -+ -+ new_rate = DIV_ROUND_CLOSEST_ULL(new_parent_rate, -+ characteristics->divisors[i]); -+ -+ tmp_diff = characteristics->output.max - new_rate; -+ if (tmp_diff < 0) -+ continue; -+ -+ if (best_diff < 0 || best_diff > tmp_diff) { -+ new_div = characteristics->divisors[i]; -+ best_diff = tmp_diff; -+ } -+ -+ if (!tmp_diff) -+ break; -+ } -+ -+ if (!new_div) { -+ ret = NOTIFY_STOP_MASK; -+ goto unlock; -+ } -+ -+ /* Update the div to preserve MCK DIV clock rate. */ -+ clk_master_div_set(master_div, new_parent_rate, -+ new_div); -+ -+ ret = NOTIFY_OK; -+ break; -+ -+ default: -+ ret = NOTIFY_DONE; -+ break; -+ } -+ -+unlock: -+ spin_unlock_irqrestore(master_div->lock, flags); -+ -+ return ret; -+} -+ -+static struct notifier_block clk_master_div_notifier = { -+ .notifier_call = clk_master_div_notifier_fn, -+}; -+ - static void clk_sama7g5_master_best_diff(struct clk_rate_request *req, - struct clk_hw *parent, - unsigned long parent_rate, -@@ -496,6 +578,8 @@ at91_clk_register_master_internal(struct - struct clk_master *master; - struct clk_init_data init; - struct clk_hw *hw; -+ unsigned int mckr; -+ unsigned long irqflags; - int ret; - - if (!name || !num_parents || !parent_names || !lock) -@@ -518,6 +602,16 @@ at91_clk_register_master_internal(struct - master->chg_pid = chg_pid; - master->lock = lock; - -+ if (ops == &master_div_ops_chg) { -+ spin_lock_irqsave(master->lock, irqflags); -+ regmap_read(master->regmap, master->layout->offset, &mckr); -+ spin_unlock_irqrestore(master->lock, irqflags); -+ -+ mckr &= layout->mask; -+ mckr = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK; -+ master->div = characteristics->divisors[mckr]; -+ } -+ - hw = &master->hw; - ret = clk_hw_register(NULL, &master->hw); - if (ret) { -@@ -554,19 +648,29 @@ at91_clk_register_master_div(struct regm - const char *name, const char *parent_name, - const struct clk_master_layout *layout, - const struct clk_master_characteristics *characteristics, -- spinlock_t *lock, u32 flags) -+ spinlock_t *lock, u32 flags, u32 safe_div) - { - const struct clk_ops *ops; -+ struct clk_hw *hw; - - if (flags & CLK_SET_RATE_GATE) - ops = &master_div_ops; - else - ops = &master_div_ops_chg; - -- return at91_clk_register_master_internal(regmap, name, 1, -- &parent_name, layout, -- characteristics, ops, -- lock, flags, -EINVAL); -+ hw = at91_clk_register_master_internal(regmap, name, 1, -+ &parent_name, layout, -+ characteristics, ops, -+ lock, flags, -EINVAL); -+ -+ if (!IS_ERR(hw) && safe_div) { -+ master_div = to_clk_master(hw); -+ master_div->safe_div = safe_div; -+ clk_notifier_register(hw->clk, -+ &clk_master_div_notifier); -+ } -+ -+ return hw; - } - - static unsigned long ---- a/drivers/clk/at91/dt-compat.c -+++ b/drivers/clk/at91/dt-compat.c -@@ -399,7 +399,7 @@ of_at91_clk_master_setup(struct device_n - - hw = at91_clk_register_master_div(regmap, name, "masterck_pres", - layout, characteristics, -- &mck_lock, CLK_SET_RATE_GATE); -+ &mck_lock, CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto out_free_characteristics; - ---- a/drivers/clk/at91/pmc.h -+++ b/drivers/clk/at91/pmc.h -@@ -182,7 +182,7 @@ at91_clk_register_master_div(struct regm - const char *parent_names, - const struct clk_master_layout *layout, - const struct clk_master_characteristics *characteristics, -- spinlock_t *lock, u32 flags); -+ spinlock_t *lock, u32 flags, u32 safe_div); - - struct clk_hw * __init - at91_clk_sama7g5_register_master(struct regmap *regmap, ---- a/drivers/clk/at91/sama5d2.c -+++ b/drivers/clk/at91/sama5d2.c -@@ -249,7 +249,7 @@ static void __init sama5d2_pmc_setup(str - "masterck_pres", - &at91sam9x5_master_layout, - &mck_characteristics, &mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/sama5d3.c -+++ b/drivers/clk/at91/sama5d3.c -@@ -184,7 +184,7 @@ static void __init sama5d3_pmc_setup(str - "masterck_pres", - &at91sam9x5_master_layout, - &mck_characteristics, &mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/sama5d4.c -+++ b/drivers/clk/at91/sama5d4.c -@@ -199,7 +199,7 @@ static void __init sama5d4_pmc_setup(str - "masterck_pres", - &at91sam9x5_master_layout, - &mck_characteristics, &mck_lock, -- CLK_SET_RATE_GATE); -+ CLK_SET_RATE_GATE, 0); - if (IS_ERR(hw)) - goto err_free; - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -1003,7 +1003,7 @@ static void __init sama7g5_pmc_setup(str - - hw = at91_clk_register_master_div(regmap, "mck0", "cpuck", - &mck0_layout, &mck0_characteristics, -- &pmc_mck0_lock, 0); -+ &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5); - if (IS_ERR(hw)) - goto err_free; - diff --git a/target/linux/at91/patches-5.15/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch b/target/linux/at91/patches-5.15/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch deleted file mode 100644 index 1ae5076da9..0000000000 --- a/target/linux/at91/patches-5.15/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 91a49481af7332853c4c921d46aded8210572210 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:17 +0300 -Subject: [PATCH 245/247] clk: at91: sama7g5: remove prescaler part of master - clock - -On SAMA7G5 the prescaler part of master clock has been implemented as a -changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit -must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is -done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has -been discovered that in some conditions the PMC_SR.MCKRDY is not rising -but the rate it provides it's stable. The workaround is to add a timeout -when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler -will be removed from Linux clock tree as all the frequencies for CPU could -be obtained from PLL and also there will be less overhead when changing -frequency via DVFS. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 11 +---------- - 1 file changed, 1 insertion(+), 10 deletions(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -992,16 +992,7 @@ static void __init sama7g5_pmc_setup(str - } - - parent_names[0] = "cpupll_divpmcck"; -- hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names, -- &mck0_layout, &mck0_characteristics, -- &pmc_mck0_lock, -- CLK_SET_RATE_PARENT, 0); -- if (IS_ERR(hw)) -- goto err_free; -- -- sama7g5_pmc->chws[PMC_CPU] = hw; -- -- hw = at91_clk_register_master_div(regmap, "mck0", "cpuck", -+ hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck", - &mck0_layout, &mck0_characteristics, - &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5); - if (IS_ERR(hw)) diff --git a/target/linux/at91/patches-5.15/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch b/target/linux/at91/patches-5.15/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch deleted file mode 100644 index 922cf0b69c..0000000000 --- a/target/linux/at91/patches-5.15/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 9fd5a49f6da9de5da83f4a53eccefad647ab15ed Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:18 +0300 -Subject: [PATCH 246/247] clk: at91: sama7g5: set low limit for mck0 at 32KHz - -MCK0 could go as low as 32KHz. Set this limit. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-15-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -Signed-off-by: Stephen Boyd ---- - drivers/clk/at91/sama7g5.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/at91/sama7g5.c -+++ b/drivers/clk/at91/sama7g5.c -@@ -850,7 +850,7 @@ static const struct { - - /* MCK0 characteristics. */ - static const struct clk_master_characteristics mck0_characteristics = { -- .output = { .min = 50000000, .max = 200000000 }, -+ .output = { .min = 32768, .max = 200000000 }, - .divisors = { 1, 2, 4, 3, 5 }, - .have_div3_pres = 1, - }; diff --git a/target/linux/at91/patches-5.15/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch b/target/linux/at91/patches-5.15/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch deleted file mode 100644 index 6751edec5c..0000000000 --- a/target/linux/at91/patches-5.15/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch +++ /dev/null @@ -1,32 +0,0 @@ -From fe07791494a78d5a4be1363385e6ba7940740644 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Mon, 11 Oct 2021 14:27:19 +0300 -Subject: [PATCH 247/247] clk: use clk_core_get_rate_recalc() in clk_rate_get() - -In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get() -will return the cached rate. Thus, use clk_core_get_rate_recalc() which -takes proper action when clock flags contains CLK_GET_RATE_NOCACHE. - -Signed-off-by: Claudiu Beznea -Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.com -Acked-by: Nicolas Ferre -[sboyd@kernel.org: Grab prepare lock around operation] -Signed-off-by: Stephen Boyd ---- - drivers/clk/clk.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/clk/clk.c -+++ b/drivers/clk/clk.c -@@ -3105,7 +3105,10 @@ static int clk_rate_get(void *data, u64 - { - struct clk_core *core = data; - -- *val = core->rate; -+ clk_prepare_lock(); -+ *val = clk_core_get_rate_recalc(core); -+ clk_prepare_unlock(); -+ - return 0; - } - diff --git a/target/linux/at91/patches-5.15/99-scripts-fix-compilation-error.patch b/target/linux/at91/patches-5.15/99-scripts-fix-compilation-error.patch deleted file mode 100644 index 711c7dfbcc..0000000000 --- a/target/linux/at91/patches-5.15/99-scripts-fix-compilation-error.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 6d18eaaaff92f928eab6fad2708b6d28785b4872 Mon Sep 17 00:00:00 2001 -From: Claudiu Beznea -Date: Wed, 13 Oct 2021 08:32:07 +0300 -Subject: [PATCH] scripts: fix compilation error - -Signed-off-by: Claudiu Beznea ---- - scripts/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/scripts/Makefile -+++ b/scripts/Makefile -@@ -21,7 +21,7 @@ HOSTCFLAGS_asn1_compiler.o = -I$(srctree - HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS) - HOSTLDLIBS_sign-file = $(CRYPTO_LIBS) - HOSTCFLAGS_extract-cert.o = $(CRYPTO_CFLAGS) --HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS) -+HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS) -lpthread - - ifdef CONFIG_UNWINDER_ORC - ifeq ($(ARCH),x86_64)