From: John Crispin Date: Wed, 29 Oct 2014 11:01:17 +0000 (+0000) Subject: ramips: add support for A5-V11 board (resubmit) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d0bf15f23595;p=openwrt%2Fstaging%2Frmilecki.git ramips: add support for A5-V11 board (resubmit) (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan SVN-Revision: 43102 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 7ca7ffb0fd9..4a482b38fdf 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -27,6 +27,9 @@ case $board in 3g300m) set_usb_led "tenda:blue:3g" ;; + a5-v11) + ucidef_set_led_default "power" "POWER" "a5-v11:red:power" "1" + ;; air3gii) set_wifi_led "airlive:green:wlan" set_usb_led "airlive:green:mobile" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ff8fbc079de..6510b1ae904 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -37,6 +37,12 @@ ramips_setup_interfaces() ucidef_set_interface_loopback case $board in + a5-v11) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 6t" + ;; + 3g300m | \ w150m | \ all0256n | \ @@ -252,6 +258,7 @@ ramips_setup_macs() lan_mac=$(macaddr_add "$lan_mac" -2) ;; + a5-v11 |\ bc2 |\ broadway |\ d105 |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 88fa623d549..b2b299dc511 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -25,6 +25,9 @@ ramips_board_detect() { *"Edimax 3g-6200nl") name="3g-6200nl" ;; + *"A5-V11") + name="a5-v11" + ;; *"Airlink101 AR725W") name="ar725w" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index c9a418e7903..4fe0ef46fa7 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -17,6 +17,7 @@ platform_check_image() { 3g-6200n | \ 3g-6200nl | \ 3g300m | \ + a5-v11 | \ air3gii | \ all0239-3g | \ all0256n | \ diff --git a/target/linux/ramips/dts/A5-V11.dts b/target/linux/ramips/dts/A5-V11.dts new file mode 100644 index 00000000000..154074a0c2d --- /dev/null +++ b/target/linux/ramips/dts/A5-V11.dts @@ -0,0 +1,117 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "A5-V11", "ralink,rt5350-soc"; + model = "A5-V11"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "pm25lq032"; + reg = <0 0>; + linux,modalias = "m25p80", "pm25lq032"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + gpio1: gpio@660 { + status = "okay"; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf", "led"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + system { + label = "a5-v11:blue:system"; + gpios = <&gpio0 20 1>; + }; + power { + label = "a5-v11:red:power"; + gpios = <&gpio0 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 7 0>; + }; + root_hub { + gpio-export,name = "root_hub"; + gpio-export,output = <1>; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 9317779ff45..759de530206 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -336,6 +336,8 @@ Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G- Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory) +Image/Build/Profile/A5-V11=$(call BuildFirmware/Poray4M/$(1),$(1),a5-v11,A5-V11) + Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII) define BuildFirmware/UIMAGE_8M @@ -593,6 +595,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/3G6200N,$(1)) $(call Image/Build/Profile/3G6200NL,$(1)) $(call Image/Build/Profile/3G300M,$(1)) + $(call Image/Build/Profile/A5-11,$(1)) $(call Image/Build/Profile/AIR3GII,$(1)) $(call Image/Build/Profile/ALL02393G,$(1)) $(call Image/Build/Profile/ALL0256N,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/misc.mk b/target/linux/ramips/rt305x/profiles/misc.mk new file mode 100644 index 00000000000..cf7db6a6cdd --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/misc.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/A5-V11 + NAME:=A5-V11 + PACKAGES:=\ + kmod-usb-core kmod-usb-ohci kmod-usb2 +endef + +define Profile/A5-V11/Description + Package set for A5-V11 +endef + +$(eval $(call Profile,A5-V11)) diff --git a/tools/firmware-utils/src/mkporayfw.c b/tools/firmware-utils/src/mkporayfw.c index 8e0cf24efbe..960c604a7ea 100644 --- a/tools/firmware-utils/src/mkporayfw.c +++ b/tools/firmware-utils/src/mkporayfw.c @@ -60,6 +60,7 @@ #define HWID_PORAY_X1 0x38353335 #define HWID_NEXX_WT15XXX 0x30353332 #define HWID_NEXX_WT3020A 0x30323033 +#define HWID_A5_V11 0x32473352 /* Recognized XOR obfuscation keys */ #define KEY_HAME 0 @@ -69,6 +70,7 @@ #define KEY_PORAY_4 4 #define KEY_NEXX_1 5 #define KEY_NEXX_2 6 +#define KEY_A5_V11 7 /* XOR key length */ #define KEY_LEN 15 @@ -123,6 +125,7 @@ static uint8_t key[][KEY_LEN] = { {0x79, 0x7B, 0x7A, 0x93, 0x92, 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0xE6, 0xC7}, {0x19, 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0x16, 0xC6}, {0x39, 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0x16, 0xC6}, + {0xC8, 0x3C, 0x3A, 0x93, 0xA2, 0x95, 0xC3, 0x63, 0x48, 0x45, 0x58, 0x09, 0x20, 0x11, 0x08}, }; static struct flash_layout layouts[] = { @@ -139,6 +142,11 @@ static struct flash_layout layouts[] = { static struct board_info boards[] = { { + .id = "A5-V11", + .hw_id = HWID_A5_V11, + .layout_id = "4M", + .key = KEY_A5_V11, + }, { .id = "MPR-A1", .hw_id = HWID_HAME_MPR_A1_L8, .layout_id = "4M",