From: Gabor Juhos Date: Tue, 8 Jun 2010 20:18:34 +0000 (+0000) Subject: ip17xx: Maintain state->remove_tag incrementally X-Git-Tag: reboot~19695 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d08093b8b3370b67b68420af2c68e0c298e10de3;p=openwrt%2Fopenwrt.git ip17xx: Maintain state->remove_tag incrementally So far, state->remove_tag was sometimes updated incrementally, sometimes left to correct_vlan_state() to recalculate. Since I want to avoid use of correct_vlan_state() for IP175D, this patch fixes the only two remaining places which leave state->remove_tag inconsistent with state->add_tag and it drops the recalculation. Signed-off-by: Martin Mares Signed-off-by: Patrick Horn SVN-Revision: 21717 --- diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c index 572659117a..187fcfeaf5 100644 --- a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c +++ b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c @@ -696,7 +696,6 @@ static void ip175c_correct_vlan_state(struct ip175c_state *state) state->ports[i].shareports |= state->vlans[j].ports; } } - state->remove_tag = ((~state->add_tag) & ((1<regs->NUM_PORTS)-1)); } static int ip175c_update_state(struct ip175c_state *state) @@ -742,7 +741,7 @@ static void ip175c_reset_vlan_config(struct ip175c_state *state) { int i; - state->remove_tag = 0x0000; + state->remove_tag = (state->vlan_enabled ? ((1<regs->NUM_PORTS)-1) : 0x0000); state->add_tag = 0x0000; for (i = 0; i < MAX_VLANS; i++) state->vlans[i].ports = 0x0000; @@ -821,12 +820,14 @@ static int ip175c_set_ports(struct switch_dev *dev, struct switch_val *val) state->vlans[val->port_vlan].ports = 0; for (i = 0; i < val->len; i++) { - int bitmask = (1<value.ports[i].id); + unsigned int bitmask = (1<value.ports[i].id); state->vlans[val->port_vlan].ports |= bitmask; if (val->value.ports[i].flags & (1<add_tag |= bitmask; + state->remove_tag &= (~bitmask); } else { state->add_tag &= (~bitmask); + state->remove_tag |= bitmask; } }