From: Christian Marangi Date: Tue, 18 Oct 2022 21:48:45 +0000 (+0200) Subject: ipq806x: 6.1: drop upstream patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d06b859ada9bb50889338f42d9e6bda0c89768a1;p=openwrt%2Fstaging%2Flinusw.git ipq806x: 6.1: drop upstream patch Drop patch that got merged upstream. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-04-linux-next-clk-qcom-gcc-ipq806x-fix-wrong-naming-for-gcc_pxo_pl.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-04-linux-next-clk-qcom-gcc-ipq806x-fix-wrong-naming-for-gcc_pxo_pl.patch deleted file mode 100644 index f3f3ea30da..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-04-linux-next-clk-qcom-gcc-ipq806x-fix-wrong-naming-for-gcc_pxo_pl.patch +++ /dev/null @@ -1,109 +0,0 @@ -From e95e825333eda345d812b461301dad50021d5487 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:24 +0100 -Subject: [PATCH 04/14] clk: qcom: gcc-ipq806x: fix wrong naming for - gcc_pxo_pll8_pll0 - -Parent gcc_pxo_pll8_pll0 had the parent definition and parent map -swapped. Fix this naming error. - -Signed-off-by: Ansuel Smith -Reviewed-by: Bjorn Andersson -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-5-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] - "pll3", - }; - --static const struct parent_map gcc_pxo_pll8_pll0[] = { -+static const struct parent_map gcc_pxo_pll8_pll0_map[] = { - { P_PXO, 0 }, - { P_PLL8, 3 }, - { P_PLL0, 2 } - }; - --static const char * const gcc_pxo_pll8_pll0_map[] = { -+static const char * const gcc_pxo_pll8_pll0[] = { - "pxo", - "pll8_vote", - "pll0_vote", -@@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_s - }, - .s = { - .src_sel_shift = 0, -- .parent_map = gcc_pxo_pll8_pll0, -+ .parent_map = gcc_pxo_pll8_pll0_map, - }, - .freq_tbl = clk_tbl_usb30_master, - .clkr = { -@@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb30_master_ref_src", -- .parent_names = gcc_pxo_pll8_pll0_map, -+ .parent_names = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = { - }, - .s = { - .src_sel_shift = 0, -- .parent_map = gcc_pxo_pll8_pll0, -+ .parent_map = gcc_pxo_pll8_pll0_map, - }, - .freq_tbl = clk_tbl_usb30_utmi, - .clkr = { -@@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb30_utmi_clk", -- .parent_names = gcc_pxo_pll8_pll0_map, -+ .parent_names = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_s - }, - .s = { - .src_sel_shift = 0, -- .parent_map = gcc_pxo_pll8_pll0, -+ .parent_map = gcc_pxo_pll8_pll0_map, - }, - .freq_tbl = clk_tbl_usb, - .clkr = { -@@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb_hs1_xcvr_src", -- .parent_names = gcc_pxo_pll8_pll0_map, -+ .parent_names = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_s - }, - .s = { - .src_sel_shift = 0, -- .parent_map = gcc_pxo_pll8_pll0, -+ .parent_map = gcc_pxo_pll8_pll0_map, - }, - .freq_tbl = clk_tbl_usb, - .clkr = { -@@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb_fs1_xcvr_src", -- .parent_names = gcc_pxo_pll8_pll0_map, -+ .parent_names = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-05-linux-next-clk-qcom-gcc-ipq806x-convert-parent_names-to-parent_.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-05-linux-next-clk-qcom-gcc-ipq806x-convert-parent_names-to-parent_.patch deleted file mode 100644 index d99ac9992f..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-05-linux-next-clk-qcom-gcc-ipq806x-convert-parent_names-to-parent_.patch +++ /dev/null @@ -1,921 +0,0 @@ -From cb02866f9a740fb9fb8ff19698a69290da4057e5 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:25 +0100 -Subject: [PATCH 05/14] clk: qcom: gcc-ipq806x: convert parent_names to - parent_data - -Convert parent_names to parent_data to modernize the driver. -Where possible use parent_hws directly. - -Signed-off-by: Ansuel Smith -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 286 ++++++++++++++++++++------------- - 1 file changed, 173 insertions(+), 113 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -25,6 +25,10 @@ - #include "clk-hfpll.h" - #include "reset.h" - -+static const struct clk_parent_data gcc_pxo[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+}; -+ - static struct clk_pll pll0 = { - .l_reg = 0x30c4, - .m_reg = 0x30c8, -@@ -35,7 +39,7 @@ static struct clk_pll pll0 = { - .status_bit = 16, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll0", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -46,7 +50,9 @@ static struct clk_regmap pll0_vote = { - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "pll0_vote", -- .parent_names = (const char *[]){ "pll0" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pll0.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_pll_vote_ops, - }, -@@ -62,7 +68,7 @@ static struct clk_pll pll3 = { - .status_bit = 16, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll3", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -89,7 +95,7 @@ static struct clk_pll pll8 = { - .status_bit = 16, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll8", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -100,7 +106,9 @@ static struct clk_regmap pll8_vote = { - .enable_mask = BIT(8), - .hw.init = &(struct clk_init_data){ - .name = "pll8_vote", -- .parent_names = (const char *[]){ "pll8" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pll8.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_pll_vote_ops, - }, -@@ -123,7 +131,7 @@ static struct hfpll_data hfpll0_data = { - static struct clk_hfpll hfpll0 = { - .d = &hfpll0_data, - .clkr.hw.init = &(struct clk_init_data){ -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .name = "hfpll0", - .ops = &clk_ops_hfpll, -@@ -149,7 +157,7 @@ static struct hfpll_data hfpll1_data = { - static struct clk_hfpll hfpll1 = { - .d = &hfpll1_data, - .clkr.hw.init = &(struct clk_init_data){ -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .name = "hfpll1", - .ops = &clk_ops_hfpll, -@@ -175,7 +183,7 @@ static struct hfpll_data hfpll_l2_data = - static struct clk_hfpll hfpll_l2 = { - .d = &hfpll_l2_data, - .clkr.hw.init = &(struct clk_init_data){ -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .name = "hfpll_l2", - .ops = &clk_ops_hfpll, -@@ -194,7 +202,7 @@ static struct clk_pll pll14 = { - .status_bit = 16, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll14", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -205,7 +213,9 @@ static struct clk_regmap pll14_vote = { - .enable_mask = BIT(14), - .hw.init = &(struct clk_init_data){ - .name = "pll14_vote", -- .parent_names = (const char *[]){ "pll14" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pll14.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_pll_vote_ops, - }, -@@ -238,7 +248,7 @@ static struct clk_pll pll18 = { - .freq_tbl = pll18_freq_tbl, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll18", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -259,9 +269,9 @@ static const struct parent_map gcc_pxo_p - { P_PLL8, 3 } - }; - --static const char * const gcc_pxo_pll8[] = { -- "pxo", -- "pll8_vote", -+static const struct clk_parent_data gcc_pxo_pll8[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .hw = &pll8_vote.hw }, - }; - - static const struct parent_map gcc_pxo_pll8_cxo_map[] = { -@@ -270,10 +280,10 @@ static const struct parent_map gcc_pxo_p - { P_CXO, 5 } - }; - --static const char * const gcc_pxo_pll8_cxo[] = { -- "pxo", -- "pll8_vote", -- "cxo", -+static const struct clk_parent_data gcc_pxo_pll8_cxo[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .hw = &pll8_vote.hw }, -+ { .fw_name = "cxo", .name = "cxo" }, - }; - - static const struct parent_map gcc_pxo_pll3_map[] = { -@@ -286,9 +296,9 @@ static const struct parent_map gcc_pxo_p - { P_PLL3, 6 } - }; - --static const char * const gcc_pxo_pll3[] = { -- "pxo", -- "pll3", -+static const struct clk_parent_data gcc_pxo_pll3[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .hw = &pll3.clkr.hw }, - }; - - static const struct parent_map gcc_pxo_pll8_pll0_map[] = { -@@ -297,10 +307,10 @@ static const struct parent_map gcc_pxo_p - { P_PLL0, 2 } - }; - --static const char * const gcc_pxo_pll8_pll0[] = { -- "pxo", -- "pll8_vote", -- "pll0_vote", -+static const struct clk_parent_data gcc_pxo_pll8_pll0[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .hw = &pll8_vote.hw }, -+ { .hw = &pll0_vote.hw }, - }; - - static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = { -@@ -311,12 +321,12 @@ static const struct parent_map gcc_pxo_p - { P_PLL18, 1 } - }; - --static const char * const gcc_pxo_pll8_pll14_pll18_pll0[] = { -- "pxo", -- "pll8_vote", -- "pll0_vote", -- "pll14", -- "pll18", -+static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .hw = &pll8_vote.hw }, -+ { .hw = &pll0_vote.hw }, -+ { .hw = &pll14.clkr.hw }, -+ { .hw = &pll18.clkr.hw }, - }; - - static struct freq_tbl clk_tbl_gsbi_uart[] = { -@@ -362,7 +372,7 @@ static struct clk_rcg gsbi1_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -378,8 +388,8 @@ static struct clk_branch gsbi1_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi1_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi1_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -413,7 +423,7 @@ static struct clk_rcg gsbi2_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -429,8 +439,8 @@ static struct clk_branch gsbi2_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi2_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi2_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -464,7 +474,7 @@ static struct clk_rcg gsbi4_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -480,8 +490,8 @@ static struct clk_branch gsbi4_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi4_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi4_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -515,7 +525,7 @@ static struct clk_rcg gsbi5_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -531,8 +541,8 @@ static struct clk_branch gsbi5_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi5_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi5_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -566,7 +576,7 @@ static struct clk_rcg gsbi6_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -582,8 +592,8 @@ static struct clk_branch gsbi6_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi6_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi6_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -617,7 +627,7 @@ static struct clk_rcg gsbi7_uart_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_uart_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -633,8 +643,8 @@ static struct clk_branch gsbi7_uart_clk - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_uart_clk", -- .parent_names = (const char *[]){ -- "gsbi7_uart_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi7_uart_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -681,7 +691,7 @@ static struct clk_rcg gsbi1_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -697,7 +707,9 @@ static struct clk_branch gsbi1_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_qup_clk", -- .parent_names = (const char *[]){ "gsbi1_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi1_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -730,7 +742,7 @@ static struct clk_rcg gsbi2_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -746,7 +758,9 @@ static struct clk_branch gsbi2_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_qup_clk", -- .parent_names = (const char *[]){ "gsbi2_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi2_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -779,7 +793,7 @@ static struct clk_rcg gsbi4_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -795,7 +809,9 @@ static struct clk_branch gsbi4_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_qup_clk", -- .parent_names = (const char *[]){ "gsbi4_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi4_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -828,7 +844,7 @@ static struct clk_rcg gsbi5_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -844,7 +860,9 @@ static struct clk_branch gsbi5_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_qup_clk", -- .parent_names = (const char *[]){ "gsbi5_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi5_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -877,7 +895,7 @@ static struct clk_rcg gsbi6_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -893,7 +911,9 @@ static struct clk_branch gsbi6_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_qup_clk", -- .parent_names = (const char *[]){ "gsbi6_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi6_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -926,7 +946,7 @@ static struct clk_rcg gsbi7_qup_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_qup_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -942,7 +962,9 @@ static struct clk_branch gsbi7_qup_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_qup_clk", -- .parent_names = (const char *[]){ "gsbi7_qup_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gsbi7_qup_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1076,7 +1098,7 @@ static struct clk_rcg gp0_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gp0_src", -- .parent_names = gcc_pxo_pll8_cxo, -+ .parent_data = gcc_pxo_pll8_cxo, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, -@@ -1092,7 +1114,9 @@ static struct clk_branch gp0_clk = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gp0_clk", -- .parent_names = (const char *[]){ "gp0_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gp0_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1125,7 +1149,7 @@ static struct clk_rcg gp1_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gp1_src", -- .parent_names = gcc_pxo_pll8_cxo, -+ .parent_data = gcc_pxo_pll8_cxo, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1141,7 +1165,9 @@ static struct clk_branch gp1_clk = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gp1_clk", -- .parent_names = (const char *[]){ "gp1_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gp1_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1174,7 +1200,7 @@ static struct clk_rcg gp2_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "gp2_src", -- .parent_names = gcc_pxo_pll8_cxo, -+ .parent_data = gcc_pxo_pll8_cxo, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1190,7 +1216,9 @@ static struct clk_branch gp2_clk = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "gp2_clk", -- .parent_names = (const char *[]){ "gp2_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &gp2_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1228,7 +1256,7 @@ static struct clk_rcg prng_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "prng_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - }, -@@ -1244,7 +1272,9 @@ static struct clk_branch prng_clk = { - .enable_mask = BIT(10), - .hw.init = &(struct clk_init_data){ - .name = "prng_clk", -- .parent_names = (const char *[]){ "prng_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &prng_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - }, -@@ -1290,7 +1320,7 @@ static struct clk_rcg sdc1_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "sdc1_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - }, -@@ -1305,7 +1335,9 @@ static struct clk_branch sdc1_clk = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "sdc1_clk", -- .parent_names = (const char *[]){ "sdc1_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &sdc1_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1338,7 +1370,7 @@ static struct clk_rcg sdc3_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "sdc3_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - }, -@@ -1353,7 +1385,9 @@ static struct clk_branch sdc3_clk = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "sdc3_clk", -- .parent_names = (const char *[]){ "sdc3_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &sdc3_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1421,7 +1455,7 @@ static struct clk_rcg tsif_ref_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "tsif_ref_src", -- .parent_names = gcc_pxo_pll8, -+ .parent_data = gcc_pxo_pll8, - .num_parents = 2, - .ops = &clk_rcg_ops, - }, -@@ -1436,7 +1470,9 @@ static struct clk_branch tsif_ref_clk = - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "tsif_ref_clk", -- .parent_names = (const char *[]){ "tsif_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &tsif_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1583,7 +1619,7 @@ static struct clk_rcg pcie_ref_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "pcie_ref_src", -- .parent_names = gcc_pxo_pll3, -+ .parent_data = gcc_pxo_pll3, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1599,7 +1635,9 @@ static struct clk_branch pcie_ref_src_cl - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "pcie_ref_src_clk", -- .parent_names = (const char *[]){ "pcie_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pcie_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1675,7 +1713,7 @@ static struct clk_rcg pcie1_ref_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "pcie1_ref_src", -- .parent_names = gcc_pxo_pll3, -+ .parent_data = gcc_pxo_pll3, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1691,7 +1729,9 @@ static struct clk_branch pcie1_ref_src_c - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "pcie1_ref_src_clk", -- .parent_names = (const char *[]){ "pcie1_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pcie1_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1767,7 +1807,7 @@ static struct clk_rcg pcie2_ref_src = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "pcie2_ref_src", -- .parent_names = gcc_pxo_pll3, -+ .parent_data = gcc_pxo_pll3, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1783,7 +1823,9 @@ static struct clk_branch pcie2_ref_src_c - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "pcie2_ref_src_clk", -- .parent_names = (const char *[]){ "pcie2_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pcie2_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1864,7 +1906,7 @@ static struct clk_rcg sata_ref_src = { - .enable_mask = BIT(7), - .hw.init = &(struct clk_init_data){ - .name = "sata_ref_src", -- .parent_names = gcc_pxo_pll3, -+ .parent_data = gcc_pxo_pll3, - .num_parents = 2, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -1880,7 +1922,9 @@ static struct clk_branch sata_rxoob_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "sata_rxoob_clk", -- .parent_names = (const char *[]){ "sata_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &sata_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1896,7 +1940,9 @@ static struct clk_branch sata_pmalive_cl - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "sata_pmalive_clk", -- .parent_names = (const char *[]){ "sata_ref_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &sata_ref_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1912,7 +1958,7 @@ static struct clk_branch sata_phy_ref_cl - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "sata_phy_ref_clk", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = gcc_pxo, - .num_parents = 1, - .ops = &clk_branch_ops, - }, -@@ -2001,7 +2047,7 @@ static struct clk_rcg usb30_master_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb30_master_ref_src", -- .parent_names = gcc_pxo_pll8_pll0, -+ .parent_data = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2017,7 +2063,9 @@ static struct clk_branch usb30_0_branch_ - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "usb30_0_branch_clk", -- .parent_names = (const char *[]){ "usb30_master_ref_src", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb30_master_clk_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2033,7 +2081,9 @@ static struct clk_branch usb30_1_branch_ - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "usb30_1_branch_clk", -- .parent_names = (const char *[]){ "usb30_master_ref_src", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb30_master_clk_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2071,7 +2121,7 @@ static struct clk_rcg usb30_utmi_clk = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb30_utmi_clk", -- .parent_names = gcc_pxo_pll8_pll0, -+ .parent_data = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2087,7 +2137,9 @@ static struct clk_branch usb30_0_utmi_cl - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "usb30_0_utmi_clk_ctl", -- .parent_names = (const char *[]){ "usb30_utmi_clk", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb30_utmi_clk.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2103,7 +2155,9 @@ static struct clk_branch usb30_1_utmi_cl - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "usb30_1_utmi_clk_ctl", -- .parent_names = (const char *[]){ "usb30_utmi_clk", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb30_utmi_clk.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2141,7 +2195,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb_hs1_xcvr_src", -- .parent_names = gcc_pxo_pll8_pll0, -+ .parent_data = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2157,7 +2211,9 @@ static struct clk_branch usb_hs1_xcvr_cl - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "usb_hs1_xcvr_clk", -- .parent_names = (const char *[]){ "usb_hs1_xcvr_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb_hs1_xcvr_clk_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2205,7 +2261,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_s - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "usb_fs1_xcvr_src", -- .parent_names = gcc_pxo_pll8_pll0, -+ .parent_data = gcc_pxo_pll8_pll0, - .num_parents = 3, - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, -@@ -2221,7 +2277,9 @@ static struct clk_branch usb_fs1_xcvr_cl - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "usb_fs1_xcvr_clk", -- .parent_names = (const char *[]){ "usb_fs1_xcvr_src", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb_fs1_xcvr_clk_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2237,7 +2295,9 @@ static struct clk_branch usb_fs1_sys_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "usb_fs1_sys_clk", -- .parent_names = (const char *[]){ "usb_fs1_xcvr_src", }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &usb_fs1_xcvr_clk_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -2337,7 +2397,7 @@ static struct clk_dyn_rcg gmac_core1_src - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core1_src", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - }, -@@ -2354,8 +2414,8 @@ static struct clk_branch gmac_core1_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core1_clk", -- .parent_names = (const char *[]){ -- "gmac_core1_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gmac_core1_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -2409,7 +2469,7 @@ static struct clk_dyn_rcg gmac_core2_src - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core2_src", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - }, -@@ -2426,8 +2486,8 @@ static struct clk_branch gmac_core2_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core2_clk", -- .parent_names = (const char *[]){ -- "gmac_core2_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gmac_core2_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -2481,7 +2541,7 @@ static struct clk_dyn_rcg gmac_core3_src - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core3_src", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - }, -@@ -2498,8 +2558,8 @@ static struct clk_branch gmac_core3_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core3_clk", -- .parent_names = (const char *[]){ -- "gmac_core3_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gmac_core3_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -2553,7 +2613,7 @@ static struct clk_dyn_rcg gmac_core4_src - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core4_src", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - }, -@@ -2570,8 +2630,8 @@ static struct clk_branch gmac_core4_clk - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "gmac_core4_clk", -- .parent_names = (const char *[]){ -- "gmac_core4_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &gmac_core4_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -2613,7 +2673,7 @@ static struct clk_dyn_rcg nss_tcm_src = - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "nss_tcm_src", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - }, -@@ -2628,8 +2688,8 @@ static struct clk_branch nss_tcm_clk = { - .enable_mask = BIT(6) | BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "nss_tcm_clk", -- .parent_names = (const char *[]){ -- "nss_tcm_src", -+ .parent_hws = (const struct clk_hw*[]){ -+ &nss_tcm_src.clkr.hw, - }, - .num_parents = 1, - .ops = &clk_branch_ops, -@@ -2691,7 +2751,7 @@ static struct clk_dyn_rcg ubi32_core1_sr - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "ubi32_core1_src_clk", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, -@@ -2744,7 +2804,7 @@ static struct clk_dyn_rcg ubi32_core2_sr - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "ubi32_core2_src_clk", -- .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, -+ .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents = 5, - .ops = &clk_dyn_rcg_ops, - .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-06-linux-next-clk-qcom-gcc-ipq806x-use-ARRAY_SIZE-for-num_parents.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-06-linux-next-clk-qcom-gcc-ipq806x-use-ARRAY_SIZE-for-num_parents.patch deleted file mode 100644 index 6e6cec7db5..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-06-linux-next-clk-qcom-gcc-ipq806x-use-ARRAY_SIZE-for-num_parents.patch +++ /dev/null @@ -1,325 +0,0 @@ -From a6aedd6532131bc81d47bbf63385dfcf2a0e9faa Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:26 +0100 -Subject: [PATCH 06/14] clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents - -Use ARRAY_SIZE for num_parents instead of hardcoding the value. - -Signed-off-by: Ansuel Smith -Reviewed-by: Bjorn Andersson -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 68 +++++++++++++++++----------------- - 1 file changed, 34 insertions(+), 34 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -373,7 +373,7 @@ static struct clk_rcg gsbi1_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -424,7 +424,7 @@ static struct clk_rcg gsbi2_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -475,7 +475,7 @@ static struct clk_rcg gsbi4_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -526,7 +526,7 @@ static struct clk_rcg gsbi5_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -577,7 +577,7 @@ static struct clk_rcg gsbi6_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -628,7 +628,7 @@ static struct clk_rcg gsbi7_uart_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_uart_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -692,7 +692,7 @@ static struct clk_rcg gsbi1_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi1_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -743,7 +743,7 @@ static struct clk_rcg gsbi2_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi2_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -794,7 +794,7 @@ static struct clk_rcg gsbi4_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -845,7 +845,7 @@ static struct clk_rcg gsbi5_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi5_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -896,7 +896,7 @@ static struct clk_rcg gsbi6_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi6_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -947,7 +947,7 @@ static struct clk_rcg gsbi7_qup_src = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi7_qup_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -1099,7 +1099,7 @@ static struct clk_rcg gp0_src = { - .hw.init = &(struct clk_init_data){ - .name = "gp0_src", - .parent_data = gcc_pxo_pll8_cxo, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo), - .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, - }, -@@ -1150,7 +1150,7 @@ static struct clk_rcg gp1_src = { - .hw.init = &(struct clk_init_data){ - .name = "gp1_src", - .parent_data = gcc_pxo_pll8_cxo, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -1201,7 +1201,7 @@ static struct clk_rcg gp2_src = { - .hw.init = &(struct clk_init_data){ - .name = "gp2_src", - .parent_data = gcc_pxo_pll8_cxo, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -1257,7 +1257,7 @@ static struct clk_rcg prng_src = { - .hw.init = &(struct clk_init_data){ - .name = "prng_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - }, - }, -@@ -1321,7 +1321,7 @@ static struct clk_rcg sdc1_src = { - .hw.init = &(struct clk_init_data){ - .name = "sdc1_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - }, - } -@@ -1371,7 +1371,7 @@ static struct clk_rcg sdc3_src = { - .hw.init = &(struct clk_init_data){ - .name = "sdc3_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - }, - } -@@ -1456,7 +1456,7 @@ static struct clk_rcg tsif_ref_src = { - .hw.init = &(struct clk_init_data){ - .name = "tsif_ref_src", - .parent_data = gcc_pxo_pll8, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, - }, - } -@@ -1620,7 +1620,7 @@ static struct clk_rcg pcie_ref_src = { - .hw.init = &(struct clk_init_data){ - .name = "pcie_ref_src", - .parent_data = gcc_pxo_pll3, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -1714,7 +1714,7 @@ static struct clk_rcg pcie1_ref_src = { - .hw.init = &(struct clk_init_data){ - .name = "pcie1_ref_src", - .parent_data = gcc_pxo_pll3, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -1808,7 +1808,7 @@ static struct clk_rcg pcie2_ref_src = { - .hw.init = &(struct clk_init_data){ - .name = "pcie2_ref_src", - .parent_data = gcc_pxo_pll3, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -1907,7 +1907,7 @@ static struct clk_rcg sata_ref_src = { - .hw.init = &(struct clk_init_data){ - .name = "sata_ref_src", - .parent_data = gcc_pxo_pll3, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -2048,7 +2048,7 @@ static struct clk_rcg usb30_master_clk_s - .hw.init = &(struct clk_init_data){ - .name = "usb30_master_ref_src", - .parent_data = gcc_pxo_pll8_pll0, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -2122,7 +2122,7 @@ static struct clk_rcg usb30_utmi_clk = { - .hw.init = &(struct clk_init_data){ - .name = "usb30_utmi_clk", - .parent_data = gcc_pxo_pll8_pll0, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -2196,7 +2196,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_s - .hw.init = &(struct clk_init_data){ - .name = "usb_hs1_xcvr_src", - .parent_data = gcc_pxo_pll8_pll0, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -2262,7 +2262,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_s - .hw.init = &(struct clk_init_data){ - .name = "usb_fs1_xcvr_src", - .parent_data = gcc_pxo_pll8_pll0, -- .num_parents = 3, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -2398,7 +2398,7 @@ static struct clk_dyn_rcg gmac_core1_src - .hw.init = &(struct clk_init_data){ - .name = "gmac_core1_src", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - }, - }, -@@ -2470,7 +2470,7 @@ static struct clk_dyn_rcg gmac_core2_src - .hw.init = &(struct clk_init_data){ - .name = "gmac_core2_src", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - }, - }, -@@ -2542,7 +2542,7 @@ static struct clk_dyn_rcg gmac_core3_src - .hw.init = &(struct clk_init_data){ - .name = "gmac_core3_src", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - }, - }, -@@ -2614,7 +2614,7 @@ static struct clk_dyn_rcg gmac_core4_src - .hw.init = &(struct clk_init_data){ - .name = "gmac_core4_src", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - }, - }, -@@ -2674,7 +2674,7 @@ static struct clk_dyn_rcg nss_tcm_src = - .hw.init = &(struct clk_init_data){ - .name = "nss_tcm_src", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - }, - }, -@@ -2752,7 +2752,7 @@ static struct clk_dyn_rcg ubi32_core1_sr - .hw.init = &(struct clk_init_data){ - .name = "ubi32_core1_src_clk", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, - }, -@@ -2805,7 +2805,7 @@ static struct clk_dyn_rcg ubi32_core2_sr - .hw.init = &(struct clk_init_data){ - .name = "ubi32_core2_src_clk", - .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, -- .num_parents = 5, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0), - .ops = &clk_dyn_rcg_ops, - .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, - }, diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-07-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-nss-cores.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-07-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-nss-cores.patch deleted file mode 100644 index b0f09ec34d..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-07-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-nss-cores.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 512ea2edfe15ffa2cd839b3a31d768145f2edc20 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:27 +0100 -Subject: [PATCH 07/14] clk: qcom: gcc-ipq806x: add additional freq nss cores - -Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be -clocked to 800MHz. Add these missing freq to the gcc driver. -Set the freq_tbl for the ubi32_cores to the correct values based on the -machine compatible. - -Signed-off-by: Ansuel Smith -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 24 +++++++++++++++++++++--- - 1 file changed, 21 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -232,7 +232,9 @@ static struct clk_regmap pll14_vote = { - - static struct pll_freq_tbl pll18_freq_tbl[] = { - NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625), -+ NSS_PLL_RATE(600000000, 48, 0, 1, 0x01495625), - NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625), -+ NSS_PLL_RATE(800000000, 64, 0, 1, 0x01495625), - }; - - static struct clk_pll pll18 = { -@@ -2698,7 +2700,7 @@ static struct clk_branch nss_tcm_clk = { - }, - }; - --static const struct freq_tbl clk_tbl_nss[] = { -+static const struct freq_tbl clk_tbl_nss_ipq8064[] = { - { 110000000, P_PLL18, 1, 1, 5 }, - { 275000000, P_PLL18, 2, 0, 0 }, - { 550000000, P_PLL18, 1, 0, 0 }, -@@ -2706,6 +2708,14 @@ static const struct freq_tbl clk_tbl_nss - { } - }; - -+static const struct freq_tbl clk_tbl_nss_ipq8065[] = { -+ { 110000000, P_PLL18, 1, 1, 5 }, -+ { 275000000, P_PLL18, 2, 0, 0 }, -+ { 600000000, P_PLL18, 1, 0, 0 }, -+ { 800000000, P_PLL18, 1, 0, 0 }, -+ { } -+}; -+ - static struct clk_dyn_rcg ubi32_core1_src_clk = { - .ns_reg[0] = 0x3d2c, - .ns_reg[1] = 0x3d30, -@@ -2745,7 +2755,7 @@ static struct clk_dyn_rcg ubi32_core1_sr - .pre_div_width = 2, - }, - .mux_sel_bit = 0, -- .freq_tbl = clk_tbl_nss, -+ /* nss freq table is selected based on the SoC compatible */ - .clkr = { - .enable_reg = 0x3d20, - .enable_mask = BIT(1), -@@ -2798,7 +2808,7 @@ static struct clk_dyn_rcg ubi32_core2_sr - .pre_div_width = 2, - }, - .mux_sel_bit = 0, -- .freq_tbl = clk_tbl_nss, -+ /* nss freq table is selected based on the SoC compatible */ - .clkr = { - .enable_reg = 0x3d40, - .enable_mask = BIT(1), -@@ -3131,6 +3141,14 @@ static int gcc_ipq806x_probe(struct plat - if (ret) - return ret; - -+ if (of_machine_is_compatible("qcom,ipq8065")) { -+ ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8065; -+ ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8065; -+ } else { -+ ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8064; -+ ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8064; -+ } -+ - ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc); - if (ret) - return ret; diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-08-linux-next-clk-qcom-gcc-ipq806x-add-unusued-flag-for-critical-c.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-08-linux-next-clk-qcom-gcc-ipq806x-add-unusued-flag-for-critical-c.patch deleted file mode 100644 index 3d55cb421a..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-08-linux-next-clk-qcom-gcc-ipq806x-add-unusued-flag-for-critical-c.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 28aa450d38e521de45be951df052d2c49a17fae2 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:28 +0100 -Subject: [PATCH 08/14] clk: qcom: gcc-ipq806x: add unusued flag for critical - clock - -Some clocks are used by other devices present on the SoC. For example -the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to -reject any regulator change command. These clock should never be -disabled. - -Signed-off-by: Ansuel Smith -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -798,7 +798,7 @@ static struct clk_rcg gsbi4_qup_src = { - .parent_data = gcc_pxo_pll8, - .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, -- .flags = CLK_SET_PARENT_GATE, -+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -816,7 +816,7 @@ static struct clk_branch gsbi4_qup_clk = - }, - .num_parents = 1, - .ops = &clk_branch_ops, -- .flags = CLK_SET_RATE_PARENT, -+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -900,7 +900,7 @@ static struct clk_rcg gsbi6_qup_src = { - .parent_data = gcc_pxo_pll8, - .num_parents = ARRAY_SIZE(gcc_pxo_pll8), - .ops = &clk_rcg_ops, -- .flags = CLK_SET_PARENT_GATE, -+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -969,7 +969,7 @@ static struct clk_branch gsbi7_qup_clk = - }, - .num_parents = 1, - .ops = &clk_branch_ops, -- .flags = CLK_SET_RATE_PARENT, -+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, - }, - }, - }; -@@ -1015,6 +1015,7 @@ static struct clk_branch gsbi4_h_clk = { - .hw.init = &(struct clk_init_data){ - .name = "gsbi4_h_clk", - .ops = &clk_branch_ops, -+ .flags = CLK_IGNORE_UNUSED, - }, - }, - }; diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-09-linux-next-clk-qcom-clk-rcg-add-clk_rcg_floor_ops-ops.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-09-linux-next-clk-qcom-clk-rcg-add-clk_rcg_floor_ops-ops.patch deleted file mode 100644 index 22bd040d1b..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-09-linux-next-clk-qcom-clk-rcg-add-clk_rcg_floor_ops-ops.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 33958ad3fc02aeb06a4634e59689a9559d968e1f Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:29 +0100 -Subject: [PATCH 09/14] clk: qcom: clk-rcg: add clk_rcg_floor_ops ops - -Add clk_rcg_floor_ops for clock that can't provide a stable freq and -require to use a floor freq to provide the requested frequency. - -Signed-off-by: Ansuel Smith -Reviewed-by: Bjorn Andersson -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-10-ansuelsmth@gmail.com ---- - drivers/clk/qcom/clk-rcg.c | 24 ++++++++++++++++++++++++ - drivers/clk/qcom/clk-rcg.h | 1 + - 2 files changed, 25 insertions(+) - ---- a/drivers/clk/qcom/clk-rcg.c -+++ b/drivers/clk/qcom/clk-rcg.c -@@ -526,6 +526,19 @@ static int clk_rcg_set_rate(struct clk_h - return __clk_rcg_set_rate(rcg, f); - } - -+static int clk_rcg_set_floor_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_rcg *rcg = to_clk_rcg(hw); -+ const struct freq_tbl *f; -+ -+ f = qcom_find_freq_floor(rcg->freq_tbl, rate); -+ if (!f) -+ return -EINVAL; -+ -+ return __clk_rcg_set_rate(rcg, f); -+} -+ - static int clk_rcg_bypass_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -@@ -816,6 +829,17 @@ const struct clk_ops clk_rcg_ops = { - }; - EXPORT_SYMBOL_GPL(clk_rcg_ops); - -+const struct clk_ops clk_rcg_floor_ops = { -+ .enable = clk_enable_regmap, -+ .disable = clk_disable_regmap, -+ .get_parent = clk_rcg_get_parent, -+ .set_parent = clk_rcg_set_parent, -+ .recalc_rate = clk_rcg_recalc_rate, -+ .determine_rate = clk_rcg_determine_rate, -+ .set_rate = clk_rcg_set_floor_rate, -+}; -+EXPORT_SYMBOL_GPL(clk_rcg_floor_ops); -+ - const struct clk_ops clk_rcg_bypass_ops = { - .enable = clk_enable_regmap, - .disable = clk_disable_regmap, ---- a/drivers/clk/qcom/clk-rcg.h -+++ b/drivers/clk/qcom/clk-rcg.h -@@ -86,6 +86,7 @@ struct clk_rcg { - }; - - extern const struct clk_ops clk_rcg_ops; -+extern const struct clk_ops clk_rcg_floor_ops; - extern const struct clk_ops clk_rcg_bypass_ops; - extern const struct clk_ops clk_rcg_bypass2_ops; - extern const struct clk_ops clk_rcg_pixel_ops; diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-10-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-for-sdc-tab.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-10-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-for-sdc-tab.patch deleted file mode 100644 index 3bb5e57c87..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-10-linux-next-clk-qcom-gcc-ipq806x-add-additional-freq-for-sdc-tab.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 7e726f34c782b2ca28a29ca9870e34e4319d65bc Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:30 +0100 -Subject: [PATCH 10/14] clk: qcom: gcc-ipq806x: add additional freq for sdc - table - -Add additional freq supported for the sdc table. The ops are changed to -the floor_ops to handle a freq request of 52kHz where we need to provide -a freq of 51.2kHz instead for stability reason. - -Signed-off-by: Ansuel Smith -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-11-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc - { 20210000, P_PLL8, 1, 1, 19 }, - { 24000000, P_PLL8, 4, 1, 4 }, - { 48000000, P_PLL8, 4, 1, 2 }, -+ { 51200000, P_PLL8, 1, 2, 15 }, - { 64000000, P_PLL8, 3, 1, 2 }, - { 96000000, P_PLL8, 4, 0, 0 }, - { 192000000, P_PLL8, 2, 0, 0 }, -@@ -1325,7 +1326,7 @@ static struct clk_rcg sdc1_src = { - .name = "sdc1_src", - .parent_data = gcc_pxo_pll8, - .num_parents = ARRAY_SIZE(gcc_pxo_pll8), -- .ops = &clk_rcg_ops, -+ .ops = &clk_rcg_floor_ops, - }, - } - }; diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-11-linux-next-dt-bindings-clock-add-ipq8064-ce5-clk-define.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-11-linux-next-dt-bindings-clock-add-ipq8064-ce5-clk-define.patch deleted file mode 100644 index 858c6f78a5..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-11-linux-next-dt-bindings-clock-add-ipq8064-ce5-clk-define.patch +++ /dev/null @@ -1,39 +0,0 @@ -From b565d66403e3df303a058c0d8d00d0fc6aeb2ddc Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:31 +0100 -Subject: [PATCH 11/14] dt-bindings: clock: add ipq8064 ce5 clk define - -Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver. -Define CE5_SRC is not used so it's OK to change and we align it to -the QSDK naming. - -Signed-off-by: Ansuel Smith -Acked-by: Rob Herring -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-12-ansuelsmth@gmail.com ---- - include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h -@@ -240,7 +240,7 @@ - #define PLL14 232 - #define PLL14_VOTE 233 - #define PLL18 234 --#define CE5_SRC 235 -+#define CE5_A_CLK 235 - #define CE5_H_CLK 236 - #define CE5_CORE_CLK 237 - #define CE3_SLEEP_CLK 238 -@@ -283,5 +283,8 @@ - #define EBI2_AON_CLK 281 - #define NSSTCM_CLK_SRC 282 - #define NSSTCM_CLK 283 -+#define CE5_A_CLK_SRC 285 -+#define CE5_H_CLK_SRC 286 -+#define CE5_CORE_CLK_SRC 287 - - #endif diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-12-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-clocks.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-12-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-clocks.patch deleted file mode 100644 index 3ded707bf0..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-12-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-clocks.patch +++ /dev/null @@ -1,304 +0,0 @@ -From b293510f3961b90dcab59965f57779be93ceda7c Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:32 +0100 -Subject: [PATCH 12/14] clk: qcom: gcc-ipq806x: add CryptoEngine clocks - -Add missing CryptoEngine clocks and pll11 required clock. - -Signed-off-by: Ansuel Smith -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-13-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 244 +++++++++++++++++++++++++++++++++ - 1 file changed, 244 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -256,6 +256,24 @@ static struct clk_pll pll18 = { - }, - }; - -+static struct clk_pll pll11 = { -+ .l_reg = 0x3184, -+ .m_reg = 0x3188, -+ .n_reg = 0x318c, -+ .config_reg = 0x3194, -+ .mode_reg = 0x3180, -+ .status_reg = 0x3198, -+ .status_bit = 16, -+ .clkr.hw.init = &(struct clk_init_data){ -+ .name = "pll11", -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "pxo", -+ }, -+ .num_parents = 1, -+ .ops = &clk_pll_ops, -+ }, -+}; -+ - enum { - P_PXO, - P_PLL8, -@@ -264,6 +282,7 @@ enum { - P_CXO, - P_PLL14, - P_PLL18, -+ P_PLL11, - }; - - static const struct parent_map gcc_pxo_pll8_map[] = { -@@ -331,6 +350,44 @@ static const struct clk_parent_data gcc_ - { .hw = &pll18.clkr.hw }, - }; - -+static const struct parent_map gcc_pxo_pll8_pll0_pll14_pll18_pll11_map[] = { -+ { P_PXO, 0 }, -+ { P_PLL8, 4 }, -+ { P_PLL0, 2 }, -+ { P_PLL14, 5 }, -+ { P_PLL18, 1 }, -+ { P_PLL11, 3 }, -+}; -+ -+static const struct clk_parent_data gcc_pxo_pll8_pll0_pll14_pll18_pll11[] = { -+ { .fw_name = "pxo" }, -+ { .hw = &pll8_vote.hw }, -+ { .hw = &pll0_vote.hw }, -+ { .hw = &pll14.clkr.hw }, -+ { .hw = &pll18.clkr.hw }, -+ { .hw = &pll11.clkr.hw }, -+ -+}; -+ -+static const struct parent_map gcc_pxo_pll3_pll0_pll14_pll18_pll11_map[] = { -+ { P_PXO, 0 }, -+ { P_PLL3, 6 }, -+ { P_PLL0, 2 }, -+ { P_PLL14, 5 }, -+ { P_PLL18, 1 }, -+ { P_PLL11, 3 }, -+}; -+ -+static const struct clk_parent_data gcc_pxo_pll3_pll0_pll14_pll18_pll11[] = { -+ { .fw_name = "pxo" }, -+ { .hw = &pll3.clkr.hw }, -+ { .hw = &pll0_vote.hw }, -+ { .hw = &pll14.clkr.hw }, -+ { .hw = &pll18.clkr.hw }, -+ { .hw = &pll11.clkr.hw }, -+ -+}; -+ - static struct freq_tbl clk_tbl_gsbi_uart[] = { - { 1843200, P_PLL8, 2, 6, 625 }, - { 3686400, P_PLL8, 2, 12, 625 }, -@@ -2824,6 +2881,186 @@ static struct clk_dyn_rcg ubi32_core2_sr - }, - }; - -+static const struct freq_tbl clk_tbl_ce5_core[] = { -+ { 150000000, P_PLL3, 8, 1, 1 }, -+ { 213200000, P_PLL11, 5, 1, 1 }, -+ { } -+}; -+ -+static struct clk_dyn_rcg ce5_core_src = { -+ .ns_reg[0] = 0x36C4, -+ .ns_reg[1] = 0x36C8, -+ .bank_reg = 0x36C0, -+ .s[0] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map, -+ }, -+ .s[1] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map, -+ }, -+ .p[0] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .p[1] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .mux_sel_bit = 0, -+ .freq_tbl = clk_tbl_ce5_core, -+ .clkr = { -+ .enable_reg = 0x36C0, -+ .enable_mask = BIT(1), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_core_src", -+ .parent_data = gcc_pxo_pll3_pll0_pll14_pll18_pll11, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll3_pll0_pll14_pll18_pll11), -+ .ops = &clk_dyn_rcg_ops, -+ }, -+ }, -+}; -+ -+static struct clk_branch ce5_core_clk = { -+ .halt_reg = 0x2FDC, -+ .halt_bit = 5, -+ .hwcg_reg = 0x36CC, -+ .hwcg_bit = 6, -+ .clkr = { -+ .enable_reg = 0x36CC, -+ .enable_mask = BIT(4), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_core_clk", -+ .parent_hws = (const struct clk_hw*[]){ -+ &ce5_core_src.clkr.hw, -+ }, -+ .num_parents = 1, -+ .ops = &clk_branch_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }, -+ }, -+}; -+ -+static const struct freq_tbl clk_tbl_ce5_a_clk[] = { -+ { 160000000, P_PLL0, 5, 1, 1 }, -+ { 213200000, P_PLL11, 5, 1, 1 }, -+ { } -+}; -+ -+static struct clk_dyn_rcg ce5_a_clk_src = { -+ .ns_reg[0] = 0x3d84, -+ .ns_reg[1] = 0x3d88, -+ .bank_reg = 0x3d80, -+ .s[0] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, -+ }, -+ .s[1] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, -+ }, -+ .p[0] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .p[1] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .mux_sel_bit = 0, -+ .freq_tbl = clk_tbl_ce5_a_clk, -+ .clkr = { -+ .enable_reg = 0x3d80, -+ .enable_mask = BIT(1), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_a_clk_src", -+ .parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11), -+ .ops = &clk_dyn_rcg_ops, -+ }, -+ }, -+}; -+ -+static struct clk_branch ce5_a_clk = { -+ .halt_reg = 0x3c20, -+ .halt_bit = 12, -+ .hwcg_reg = 0x3d8c, -+ .hwcg_bit = 6, -+ .clkr = { -+ .enable_reg = 0x3d8c, -+ .enable_mask = BIT(4), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_a_clk", -+ .parent_hws = (const struct clk_hw*[]){ -+ &ce5_a_clk_src.clkr.hw, -+ }, -+ .num_parents = 1, -+ .ops = &clk_branch_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }, -+ }, -+}; -+ -+static const struct freq_tbl clk_tbl_ce5_h_clk[] = { -+ { 160000000, P_PLL0, 5, 1, 1 }, -+ { 213200000, P_PLL11, 5, 1, 1 }, -+ { } -+}; -+ -+static struct clk_dyn_rcg ce5_h_clk_src = { -+ .ns_reg[0] = 0x3c64, -+ .ns_reg[1] = 0x3c68, -+ .bank_reg = 0x3c60, -+ .s[0] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, -+ }, -+ .s[1] = { -+ .src_sel_shift = 0, -+ .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, -+ }, -+ .p[0] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .p[1] = { -+ .pre_div_shift = 3, -+ .pre_div_width = 4, -+ }, -+ .mux_sel_bit = 0, -+ .freq_tbl = clk_tbl_ce5_h_clk, -+ .clkr = { -+ .enable_reg = 0x3c60, -+ .enable_mask = BIT(1), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_h_clk_src", -+ .parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11, -+ .num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11), -+ .ops = &clk_dyn_rcg_ops, -+ }, -+ }, -+}; -+ -+static struct clk_branch ce5_h_clk = { -+ .halt_reg = 0x3c20, -+ .halt_bit = 11, -+ .hwcg_reg = 0x3c6c, -+ .hwcg_bit = 6, -+ .clkr = { -+ .enable_reg = 0x3c6c, -+ .enable_mask = BIT(4), -+ .hw.init = &(struct clk_init_data){ -+ .name = "ce5_h_clk", -+ .parent_hws = (const struct clk_hw*[]){ -+ &ce5_h_clk_src.clkr.hw, -+ }, -+ .num_parents = 1, -+ .ops = &clk_branch_ops, -+ .flags = CLK_SET_RATE_PARENT, -+ }, -+ }, -+}; -+ - static struct clk_regmap *gcc_ipq806x_clks[] = { - [PLL0] = &pll0.clkr, - [PLL0_VOTE] = &pll0_vote, -@@ -2831,6 +3068,7 @@ static struct clk_regmap *gcc_ipq806x_cl - [PLL4_VOTE] = &pll4_vote, - [PLL8] = &pll8.clkr, - [PLL8_VOTE] = &pll8_vote, -+ [PLL11] = &pll11.clkr, - [PLL14] = &pll14.clkr, - [PLL14_VOTE] = &pll14_vote, - [PLL18] = &pll18.clkr, -@@ -2945,6 +3183,12 @@ static struct clk_regmap *gcc_ipq806x_cl - [PLL9] = &hfpll0.clkr, - [PLL10] = &hfpll1.clkr, - [PLL12] = &hfpll_l2.clkr, -+ [CE5_A_CLK_SRC] = &ce5_a_clk_src.clkr, -+ [CE5_A_CLK] = &ce5_a_clk.clkr, -+ [CE5_H_CLK_SRC] = &ce5_h_clk_src.clkr, -+ [CE5_H_CLK] = &ce5_h_clk.clkr, -+ [CE5_CORE_CLK_SRC] = &ce5_core_src.clkr, -+ [CE5_CORE_CLK] = &ce5_core_clk.clkr, - }; - - static const struct qcom_reset_map gcc_ipq806x_resets[] = { diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-13-linux-next-dt-bindings-reset-add-ipq8064-ce5-resets.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-13-linux-next-dt-bindings-reset-add-ipq8064-ce5-resets.patch deleted file mode 100644 index 5d05c2b3af..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-13-linux-next-dt-bindings-reset-add-ipq8064-ce5-resets.patch +++ /dev/null @@ -1,29 +0,0 @@ -From f4a7e56f4956f0450b9f671ed93d45ffcc15aa62 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Tue, 18 Jan 2022 01:22:05 +0100 -Subject: [PATCH v6 13/15] dt-bindings: reset: add ipq8064 ce5 resets - -Add ipq8064 ce5 resets needed for CryptoEngine gcc driver. - -Signed-off-by: Ansuel Smith -Reviewed-by: Bjorn Andersson -Acked-by: Philipp Zabel -Acked-by: Rob Herring -Reviewed-by: Stephen Boyd ---- - include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h -+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h -@@ -163,5 +163,10 @@ - #define NSS_CAL_PRBS_RST_N_RESET 154 - #define NSS_LCKDT_RST_N_RESET 155 - #define NSS_SRDS_N_RESET 156 -+#define CRYPTO_ENG1_RESET 157 -+#define CRYPTO_ENG2_RESET 158 -+#define CRYPTO_ENG3_RESET 159 -+#define CRYPTO_ENG4_RESET 160 -+#define CRYPTO_AHB_RESET 161 - - #endif diff --git a/target/linux/ipq806x/patches-6.1/100-v5.18-14-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-resets.patch b/target/linux/ipq806x/patches-6.1/100-v5.18-14-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-resets.patch deleted file mode 100644 index a26f67e36e..0000000000 --- a/target/linux/ipq806x/patches-6.1/100-v5.18-14-linux-next-clk-qcom-gcc-ipq806x-add-CryptoEngine-resets.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4f865bdcb44fb18951de94be5c2ec37a891a8d03 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:34 +0100 -Subject: [PATCH 14/14] clk: qcom: gcc-ipq806x: add CryptoEngine resets - -Add missing CryptoEngine resets. - -Signed-off-by: Ansuel Smith -Reviewed-by: Stephen Boyd -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-15-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq806x.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -3320,6 +3320,11 @@ static const struct qcom_reset_map gcc_i - [GMAC_CORE3_RESET] = { 0x3cfc, 0 }, - [GMAC_CORE4_RESET] = { 0x3d1c, 0 }, - [GMAC_AHB_RESET] = { 0x3e24, 0 }, -+ [CRYPTO_ENG1_RESET] = { 0x3e00, 0}, -+ [CRYPTO_ENG2_RESET] = { 0x3e04, 0}, -+ [CRYPTO_ENG3_RESET] = { 0x3e08, 0}, -+ [CRYPTO_ENG4_RESET] = { 0x3e0c, 0}, -+ [CRYPTO_AHB_RESET] = { 0x3e10, 0}, - [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 }, - [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 }, - [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 }, diff --git a/target/linux/ipq806x/patches-6.1/101-v6.0-01-net-ethernet-stmmac-add-missing-sgmii-configure-for-.patch b/target/linux/ipq806x/patches-6.1/101-v6.0-01-net-ethernet-stmmac-add-missing-sgmii-configure-for-.patch deleted file mode 100644 index bd492ca1ec..0000000000 --- a/target/linux/ipq806x/patches-6.1/101-v6.0-01-net-ethernet-stmmac-add-missing-sgmii-configure-for-.patch +++ /dev/null @@ -1,151 +0,0 @@ -From 9ec092d2feb69045dd289845024301fb91c064ee Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Tue, 14 Jun 2022 13:22:27 +0200 -Subject: [PATCH 1/2] net: ethernet: stmmac: add missing sgmii configure for - ipq806x - -The different gmacid require different configuration based on the soc -and on the gmac id. Add these missing configuration taken from the -original driver. - -Signed-off-by: Christian 'Ansuel' Marangi -Link: https://lore.kernel.org/r/20220614112228.1998-1-ansuelsmth@gmail.com -Signed-off-by: Paolo Abeni ---- - drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 + - .../ethernet/stmicro/stmmac/dwmac-ipq806x.c | 93 +++++++++++++++---- - 2 files changed, 78 insertions(+), 16 deletions(-) - ---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig -+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig -@@ -83,6 +83,7 @@ config DWMAC_IPQ806X - default ARCH_QCOM - depends on OF && (ARCH_QCOM || COMPILE_TEST) - select MFD_SYSCON -+ select QCOM_SOCINFO - help - Support for QCA IPQ806X DWMAC Ethernet. - ---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c -@@ -27,6 +27,8 @@ - #include - #include - #include -+#include -+#include - - #include "stmmac_platform.h" - -@@ -75,11 +77,20 @@ - #define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2) - #define QSGMII_PHY_TX_DRIVER_EN BIT(3) - #define QSGMII_PHY_QSGMII_EN BIT(7) --#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12 --#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18 --#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20 --#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22 --#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28 -+#define QSGMII_PHY_DEEMPHASIS_LVL_MASK GENMASK(11, 10) -+#define QSGMII_PHY_DEEMPHASIS_LVL(x) FIELD_PREP(QSGMII_PHY_DEEMPHASIS_LVL_MASK, (x)) -+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK GENMASK(14, 12) -+#define QSGMII_PHY_PHASE_LOOP_GAIN(x) FIELD_PREP(QSGMII_PHY_PHASE_LOOP_GAIN_MASK, (x)) -+#define QSGMII_PHY_RX_DC_BIAS_MASK GENMASK(19, 18) -+#define QSGMII_PHY_RX_DC_BIAS(x) FIELD_PREP(QSGMII_PHY_RX_DC_BIAS_MASK, (x)) -+#define QSGMII_PHY_RX_INPUT_EQU_MASK GENMASK(21, 20) -+#define QSGMII_PHY_RX_INPUT_EQU(x) FIELD_PREP(QSGMII_PHY_RX_INPUT_EQU_MASK, (x)) -+#define QSGMII_PHY_CDR_PI_SLEW_MASK GENMASK(23, 22) -+#define QSGMII_PHY_CDR_PI_SLEW(x) FIELD_PREP(QSGMII_PHY_CDR_PI_SLEW_MASK, (x)) -+#define QSGMII_PHY_TX_SLEW_MASK GENMASK(27, 26) -+#define QSGMII_PHY_TX_SLEW(x) FIELD_PREP(QSGMII_PHY_TX_SLEW_MASK, (x)) -+#define QSGMII_PHY_TX_DRV_AMP_MASK GENMASK(31, 28) -+#define QSGMII_PHY_TX_DRV_AMP(x) FIELD_PREP(QSGMII_PHY_TX_DRV_AMP_MASK, (x)) - - struct ipq806x_gmac { - struct platform_device *pdev; -@@ -242,6 +253,64 @@ static void ipq806x_gmac_fix_mac_speed(v - ipq806x_gmac_set_speed(gmac, speed); - } - -+static const struct soc_device_attribute ipq806x_gmac_soc_v1[] = { -+ { -+ .revision = "1.*", -+ }, -+ { -+ /* sentinel */ -+ } -+}; -+ -+static int -+ipq806x_gmac_configure_qsgmii_params(struct ipq806x_gmac *gmac) -+{ -+ struct platform_device *pdev = gmac->pdev; -+ const struct soc_device_attribute *soc; -+ struct device *dev = &pdev->dev; -+ u32 qsgmii_param; -+ -+ switch (gmac->id) { -+ case 1: -+ soc = soc_device_match(ipq806x_gmac_soc_v1); -+ -+ if (soc) -+ qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xc) | -+ QSGMII_PHY_TX_SLEW(0x2) | -+ QSGMII_PHY_DEEMPHASIS_LVL(0x2); -+ else -+ qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xd) | -+ QSGMII_PHY_TX_SLEW(0x0) | -+ QSGMII_PHY_DEEMPHASIS_LVL(0x0); -+ -+ qsgmii_param |= QSGMII_PHY_RX_DC_BIAS(0x2); -+ break; -+ case 2: -+ case 3: -+ qsgmii_param = QSGMII_PHY_RX_DC_BIAS(0x3) | -+ QSGMII_PHY_TX_DRV_AMP(0xc); -+ break; -+ default: /* gmac 0 can't be set in SGMII mode */ -+ dev_err(dev, "gmac id %d can't be in SGMII mode", gmac->id); -+ return -EINVAL; -+ } -+ -+ /* Common params across all gmac id */ -+ qsgmii_param |= QSGMII_PHY_CDR_EN | -+ QSGMII_PHY_RX_FRONT_EN | -+ QSGMII_PHY_RX_SIGNAL_DETECT_EN | -+ QSGMII_PHY_TX_DRIVER_EN | -+ QSGMII_PHY_QSGMII_EN | -+ QSGMII_PHY_PHASE_LOOP_GAIN(0x4) | -+ QSGMII_PHY_RX_INPUT_EQU(0x1) | -+ QSGMII_PHY_CDR_PI_SLEW(0x2); -+ -+ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), -+ qsgmii_param); -+ -+ return 0; -+} -+ - static int ipq806x_gmac_probe(struct platform_device *pdev) - { - struct plat_stmmacenet_data *plat_dat; -@@ -328,17 +397,9 @@ static int ipq806x_gmac_probe(struct pla - regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); - - if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) { -- regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), -- QSGMII_PHY_CDR_EN | -- QSGMII_PHY_RX_FRONT_EN | -- QSGMII_PHY_RX_SIGNAL_DETECT_EN | -- QSGMII_PHY_TX_DRIVER_EN | -- QSGMII_PHY_QSGMII_EN | -- 0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET | -- 0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET | -- 0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET | -- 0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET | -- 0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET); -+ err = ipq806x_gmac_configure_qsgmii_params(gmac); -+ if (err) -+ goto err_remove_config_dt; - } - - plat_dat->has_gmac = true; diff --git a/target/linux/ipq806x/patches-6.1/101-v6.0-02-net-ethernet-stmmac-reset-force-speed-bit-for-ipq806.patch b/target/linux/ipq806x/patches-6.1/101-v6.0-02-net-ethernet-stmmac-reset-force-speed-bit-for-ipq806.patch deleted file mode 100644 index d444553452..0000000000 --- a/target/linux/ipq806x/patches-6.1/101-v6.0-02-net-ethernet-stmmac-reset-force-speed-bit-for-ipq806.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 8bca458990dd8c6d001b2fb52063aa18e8ca7444 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Tue, 14 Jun 2022 13:22:28 +0200 -Subject: [PATCH 2/2] net: ethernet: stmmac: reset force speed bit for ipq806x - -Some bootloader may set the force speed regs even if the actual -interface should use autonegotiation between PCS and PHY. -This cause the complete malfuction of the interface. - -To fix this correctly reset the force speed regs if a fixed-link is not -defined in the DTS. With a fixed-link node correctly configure the -forced speed regs to handle any misconfiguration by the bootloader. - -Reported-by: Mark Mentovai -Co-developed-by: Mark Mentovai -Signed-off-by: Mark Mentovai -Signed-off-by: Christian 'Ansuel' Marangi -Link: https://lore.kernel.org/r/20220614112228.1998-2-ansuelsmth@gmail.com -Signed-off-by: Paolo Abeni ---- - .../ethernet/stmicro/stmmac/dwmac-ipq806x.c | 64 +++++++++++++++++++ - 1 file changed, 64 insertions(+) - ---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c -@@ -66,6 +66,17 @@ - #define NSS_COMMON_CLK_DIV_SGMII_100 4 - #define NSS_COMMON_CLK_DIV_SGMII_10 49 - -+#define QSGMII_PCS_ALL_CH_CTL 0x80 -+#define QSGMII_PCS_CH_SPEED_FORCE BIT(1) -+#define QSGMII_PCS_CH_SPEED_10 0x0 -+#define QSGMII_PCS_CH_SPEED_100 BIT(2) -+#define QSGMII_PCS_CH_SPEED_1000 BIT(3) -+#define QSGMII_PCS_CH_SPEED_MASK (QSGMII_PCS_CH_SPEED_FORCE | \ -+ QSGMII_PCS_CH_SPEED_10 | \ -+ QSGMII_PCS_CH_SPEED_100 | \ -+ QSGMII_PCS_CH_SPEED_1000) -+#define QSGMII_PCS_CH_SPEED_SHIFT(x) ((x) * 4) -+ - #define QSGMII_PCS_CAL_LCKDT_CTL 0x120 - #define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19) - -@@ -253,6 +264,55 @@ static void ipq806x_gmac_fix_mac_speed(v - ipq806x_gmac_set_speed(gmac, speed); - } - -+static int -+ipq806x_gmac_configure_qsgmii_pcs_speed(struct ipq806x_gmac *gmac) -+{ -+ struct platform_device *pdev = gmac->pdev; -+ struct device *dev = &pdev->dev; -+ struct device_node *dn; -+ int link_speed; -+ int val = 0; -+ int ret; -+ -+ /* Some bootloader may apply wrong configuration and cause -+ * not functioning port. If fixed link is not set, -+ * reset the force speed bit. -+ */ -+ if (!of_phy_is_fixed_link(pdev->dev.of_node)) -+ goto write; -+ -+ dn = of_get_child_by_name(pdev->dev.of_node, "fixed-link"); -+ ret = of_property_read_u32(dn, "speed", &link_speed); -+ of_node_put(dn); -+ if (ret) { -+ dev_err(dev, "found fixed-link node with no speed"); -+ return ret; -+ } -+ -+ val = QSGMII_PCS_CH_SPEED_FORCE; -+ -+ switch (link_speed) { -+ case SPEED_1000: -+ val |= QSGMII_PCS_CH_SPEED_1000; -+ break; -+ case SPEED_100: -+ val |= QSGMII_PCS_CH_SPEED_100; -+ break; -+ case SPEED_10: -+ val |= QSGMII_PCS_CH_SPEED_10; -+ break; -+ } -+ -+write: -+ regmap_update_bits(gmac->qsgmii_csr, QSGMII_PCS_ALL_CH_CTL, -+ QSGMII_PCS_CH_SPEED_MASK << -+ QSGMII_PCS_CH_SPEED_SHIFT(gmac->id), -+ val << -+ QSGMII_PCS_CH_SPEED_SHIFT(gmac->id)); -+ -+ return 0; -+} -+ - static const struct soc_device_attribute ipq806x_gmac_soc_v1[] = { - { - .revision = "1.*", -@@ -400,6 +460,10 @@ static int ipq806x_gmac_probe(struct pla - err = ipq806x_gmac_configure_qsgmii_params(gmac); - if (err) - goto err_remove_config_dt; -+ -+ err = ipq806x_gmac_configure_qsgmii_pcs_speed(gmac); -+ if (err) -+ goto err_remove_config_dt; - } - - plat_dat->has_gmac = true; diff --git a/target/linux/ipq806x/patches-6.1/103-v5.19-ARM-dts-qcom-add-syscon-and-cxo-pxo-clock-to-gcc-nod.patch b/target/linux/ipq806x/patches-6.1/103-v5.19-ARM-dts-qcom-add-syscon-and-cxo-pxo-clock-to-gcc-nod.patch deleted file mode 100644 index 2ce526b6ca..0000000000 --- a/target/linux/ipq806x/patches-6.1/103-v5.19-ARM-dts-qcom-add-syscon-and-cxo-pxo-clock-to-gcc-nod.patch +++ /dev/null @@ -1,48 +0,0 @@ -From a5ba119455c77a07e05f2fe0af446c8bf43d1a00 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 26 Feb 2022 14:52:35 +0100 -Subject: [PATCH] ARM: dts: qcom: add syscon and cxo/pxo clock to gcc node for - ipq8064 - -Add syscon compatible required for tsens driver to correctly probe driver -and access the reg. Also add cxo and pxo tag and declare them as gcc clock -now requires them for the ipq8064 gcc driver that has now been modernized. - -Signed-off-by: Ansuel Smith -Reviewed-by: Bjorn Andersson -Reviewed-by: Stephen Boyd -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220226135235.10051-16-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -298,13 +298,13 @@ - }; - - clocks { -- cxo_board { -+ cxo_board: cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - -- pxo_board { -+ pxo_board: pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -@@ -736,7 +736,9 @@ - }; - - gcc: clock-controller@900000 { -- compatible = "qcom,gcc-ipq8064"; -+ compatible = "qcom,gcc-ipq8064", "syscon"; -+ clocks = <&pxo_board>, <&cxo_board>; -+ clock-names = "pxo", "cxo"; - reg = <0x00900000 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; diff --git a/target/linux/ipq806x/patches-6.1/103-v6.0-01-ARM-dts-qcom-replace-gcc-PXO-with-pxo_board-fixed-cl.patch b/target/linux/ipq806x/patches-6.1/103-v6.0-01-ARM-dts-qcom-replace-gcc-PXO-with-pxo_board-fixed-cl.patch deleted file mode 100644 index d0bc34c07f..0000000000 --- a/target/linux/ipq806x/patches-6.1/103-v6.0-01-ARM-dts-qcom-replace-gcc-PXO-with-pxo_board-fixed-cl.patch +++ /dev/null @@ -1,29 +0,0 @@ -From eb9e93937756a05787977875830c0dc482cb57e0 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 30 Apr 2022 07:51:17 +0200 -Subject: [PATCH] ARM: dts: qcom: replace gcc PXO with pxo_board fixed clock - -Replace gcc PXO phandle to pxo_board fixed clock declared in the dts. -gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a -kernel panic if any driver actually try to use it. - -Fixes: 40cf5c884a96 ("ARM: dts: qcom: add L2CC and RPM for IPQ8064") -Signed-off-by: Ansuel Smith -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220430055118.1947-2-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -784,7 +784,7 @@ - l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; -- clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; -+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; - }; diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-01-ARM-dts-qcom-ipq8064-add-multiple-missing-pin-defini.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-01-ARM-dts-qcom-ipq8064-add-multiple-missing-pin-defini.patch deleted file mode 100644 index 5dad164e3c..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-01-ARM-dts-qcom-ipq8064-add-multiple-missing-pin-defini.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 4af1defb305798d1a064a5ea0d0c9b30e5eee185 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:35 +0200 -Subject: [PATCH 1/8] ARM: dts: qcom: ipq8064: add multiple missing pin - definition - -Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4 -pins and rgmii2 pins for ipq8064. - -Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064 -dtsi. - -Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to -ipq8064 dtsi. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-2-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 ----- - arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 ------- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 32 +++++++++++++++++++++++ - 3 files changed, 32 insertions(+), 15 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -@@ -305,15 +305,6 @@ - }; - }; - -- mdio0_pins: mdio0_pins { -- mux { -- pins = "gpio0", "gpio1"; -- function = "gpio"; -- drive-strength = <8>; -- bias-disable; -- }; -- }; -- - mdio1_pins: mdio1_pins { - mux { - pins = "gpio10", "gpio11"; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -382,6 +382,13 @@ - }; - }; - -+ i2c4_pins: i2c4-default { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -424,6 +431,8 @@ - - pullups { - pins = "gpio39"; -+ function = "nand"; -+ drive-strength = <10>; - bias-pull-up; - }; - -@@ -431,9 +440,32 @@ - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; - bias-bus-hold; - }; - }; -+ -+ mdio0_pins: mdio0-pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "mdio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2-pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", -+ "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", -+ "gpio60", "gpio61", "gpio62"; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; - }; - - intc: interrupt-controller@2000000 { diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-02-ARM-dts-qcom-ipq8064-add-gsbi6-missing-definition.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-02-ARM-dts-qcom-ipq8064-add-gsbi6-missing-definition.patch deleted file mode 100644 index 1f4e288fb8..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-02-ARM-dts-qcom-ipq8064-add-gsbi6-missing-definition.patch +++ /dev/null @@ -1,67 +0,0 @@ -From d883a12a547b6d42e795ff3b5ac87cfd013b5423 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:36 +0200 -Subject: [PATCH 2/8] ARM: dts: qcom: ipq8064: add gsbi6 missing definition - -Add gsbi6 missing definition for ipq8064. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-3-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 43 +++++++++++++++++++++++++++++ - 1 file changed, 43 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -663,6 +663,49 @@ - }; - }; - -+ gsbi6: gsbi@16500000 { -+ compatible = "qcom,gsbi-v1.0.0"; -+ reg = <0x16500000 0x100>; -+ cell-index = <6>; -+ clocks = <&gcc GSBI6_H_CLK>; -+ clock-names = "iface"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ syscon-tcsr = <&tcsr>; -+ -+ status = "disabled"; -+ -+ gsbi6_i2c: i2c@16580000 { -+ compatible = "qcom,i2c-qup-v1.1.1"; -+ reg = <0x16580000 0x1000>; -+ interrupts = ; -+ -+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; -+ clock-names = "core", "iface"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ gsbi6_spi: spi@16580000 { -+ compatible = "qcom,spi-qup-v1.1.1"; -+ reg = <0x16580000 0x1000>; -+ interrupts = ; -+ -+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; -+ clock-names = "core", "iface"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ }; -+ - gsbi7: gsbi@16600000 { - status = "disabled"; - compatible = "qcom,gsbi-v1.0.0"; diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-03-ARM-dts-qcom-ipq8064-add-specific-dtsi-with-smb208-r.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-03-ARM-dts-qcom-ipq8064-add-specific-dtsi-with-smb208-r.patch deleted file mode 100644 index dbba722caa..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-03-ARM-dts-qcom-ipq8064-add-specific-dtsi-with-smb208-r.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 5c47a46d5e942ea6b041c8b7727b201817c1ff76 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:37 +0200 -Subject: [PATCH 3/8] ARM: dts: qcom: ipq8064: add specific dtsi with smb208 - rpm regulators - -Add specific ipq8064 dtsi with smb208 rpm regulators. - -Qcom advise to use this configuration but it's not mandatory and OEM -can decide to implement their own regulators. -smb208 regulators are used to scale CPU voltage, L2 cache voltage and -Ubi32 cores. - -There regulators are controlled by rpm and to correctly works gsbi4-i2c -require to be NEVER disabled or rpm will reject any regulator change -request. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-4-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi | 37 ++++++++++++++++++++++ - 1 file changed, 37 insertions(+) - create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include "qcom-ipq8064.dtsi" -+ -+&rpm { -+ smb208_regulators: regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+}; diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-04-ARM-dts-qcom-ipq8064-add-missing-snps-dwmac-compatib.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-04-ARM-dts-qcom-ipq8064-add-missing-snps-dwmac-compatib.patch deleted file mode 100644 index 1a3185f500..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-04-ARM-dts-qcom-ipq8064-add-missing-snps-dwmac-compatib.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 0ce34e0c13e99c239cce6099f64b0e95697f36b1 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:38 +0200 -Subject: [PATCH 4/8] ARM: dts: qcom: ipq8064: add missing snps,dwmac - compatible for gmac - -Add missing snps,dwmac compatible for gmac ipq8064 dtsi. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Reviewed-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-5-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1042,7 +1042,7 @@ - - gmac0: ethernet@37000000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37000000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; -@@ -1066,7 +1066,7 @@ - - gmac1: ethernet@37200000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37200000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; -@@ -1090,7 +1090,7 @@ - - gmac2: ethernet@37400000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37400000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; -@@ -1114,7 +1114,7 @@ - - gmac3: ethernet@37600000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37600000 0x200000>; - interrupts = ; - interrupt-names = "macirq"; diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-05-ARM-dts-qcom-ipq8064-disable-usb-phy-by-default.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-05-ARM-dts-qcom-ipq8064-disable-usb-phy-by-default.patch deleted file mode 100644 index 43dac4b7fa..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-05-ARM-dts-qcom-ipq8064-disable-usb-phy-by-default.patch +++ /dev/null @@ -1,37 +0,0 @@ -From d63d3124c0a5cdbe8b91d81b922fe56b2462e1b9 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:39 +0200 -Subject: [PATCH 5/8] ARM: dts: qcom: ipq8064: disable usb phy by default - -Disable usb phy by default. When the usb phy were pushed, half of them -were flagged as disabled by mistake. -Correctly disable all usb phy and enable them only if a device actually -use them. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-6-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1188,6 +1188,8 @@ - clocks = <&gcc USB30_1_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; -+ -+ status = "disabled"; - }; - - ss_phy_1: phy@110f8830 { -@@ -1196,6 +1198,8 @@ - clocks = <&gcc USB30_1_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; -+ -+ status = "disabled"; - }; - - usb3_1: usb3@110f8800 { diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-07-ARM-dts-qcom-ipq8064-fix-and-add-some-missing-gsbi-n.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-07-ARM-dts-qcom-ipq8064-fix-and-add-some-missing-gsbi-n.patch deleted file mode 100644 index ca5e5aa3c4..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-07-ARM-dts-qcom-ipq8064-fix-and-add-some-missing-gsbi-n.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 6c421a9c08286389bb331fe783e2625c9efcc187 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:41 +0200 -Subject: [PATCH 7/8] ARM: dts: qcom: ipq8064: fix and add some missing gsbi - node - -Add some tag for gsbi to make them usable for ipq8064 SoC. Add missing -gsbi7 i2c node and gsbi1 node. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-8-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 54 ++++++++++++++++++++++++++++- - 1 file changed, 53 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -539,6 +539,44 @@ - regulator; - }; - -+ gsbi1: gsbi@12440000 { -+ compatible = "qcom,gsbi-v1.0.0"; -+ reg = <0x12440000 0x100>; -+ cell-index = <1>; -+ clocks = <&gcc GSBI1_H_CLK>; -+ clock-names = "iface"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ syscon-tcsr = <&tcsr>; -+ -+ status = "disabled"; -+ -+ gsbi1_serial: serial@12450000 { -+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; -+ reg = <0x12450000 0x100>, -+ <0x12400000 0x03>; -+ interrupts = ; -+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; -+ clock-names = "core", "iface"; -+ -+ status = "disabled"; -+ }; -+ -+ gsbi1_i2c: i2c@12460000 { -+ compatible = "qcom,i2c-qup-v1.1.1"; -+ reg = <0x12460000 0x1000>; -+ interrupts = ; -+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; -+ clock-names = "core", "iface"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ }; -+ - gsbi2: gsbi@12480000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <2>; -@@ -562,7 +600,7 @@ - status = "disabled"; - }; - -- i2c@124a0000 { -+ gsbi2_i2c: i2c@124a0000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x124a0000 0x1000>; - interrupts = ; -@@ -727,6 +765,20 @@ - clock-names = "core", "iface"; - status = "disabled"; - }; -+ -+ gsbi7_i2c: i2c@16680000 { -+ compatible = "qcom,i2c-qup-v1.1.1"; -+ reg = <0x16680000 0x1000>; -+ interrupts = ; -+ -+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; -+ clock-names = "core", "iface"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; - }; - - rng@1a500000 { diff --git a/target/linux/ipq806x/patches-6.1/104-v6.0-08-ARM-dts-qcom-ipq8064-add-speedbin-efuse-nvmem-node.patch b/target/linux/ipq806x/patches-6.1/104-v6.0-08-ARM-dts-qcom-ipq8064-add-speedbin-efuse-nvmem-node.patch deleted file mode 100644 index 463c3d4a65..0000000000 --- a/target/linux/ipq806x/patches-6.1/104-v6.0-08-ARM-dts-qcom-ipq8064-add-speedbin-efuse-nvmem-node.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 7f5aecdd4ffcc018f73171bc0e028cd4e3361acd Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 03:09:43 +0200 -Subject: [PATCH 8/8] ARM: dts: qcom: ipq8064: add speedbin efuse nvmem node - -Add speedbin efuse nvmem cell needed for the opp table for the CPU -freqs. - -Signed-off-by: Christian Marangi -Tested-by: Jonathan McDowell -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707010943.20857-10-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -854,6 +854,9 @@ - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; -+ speedbin_efuse: speedbin@c0 { -+ reg = <0xc0 0x4>; -+ }; - tsens_calib: calib@400 { - reg = <0x400 0xb>; - }; diff --git a/target/linux/ipq806x/patches-6.1/105-v6.0-01-hwspinlock-qcom-Add-support-for-mmio-usage-to-sfpb-m.patch b/target/linux/ipq806x/patches-6.1/105-v6.0-01-hwspinlock-qcom-Add-support-for-mmio-usage-to-sfpb-m.patch deleted file mode 100644 index 2c6f6b10c4..0000000000 --- a/target/linux/ipq806x/patches-6.1/105-v6.0-01-hwspinlock-qcom-Add-support-for-mmio-usage-to-sfpb-m.patch +++ /dev/null @@ -1,71 +0,0 @@ -From cdab30b44518513003607ecfc8a22de3dbbb78ed Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 12:20:38 +0200 -Subject: [PATCH 1/1] hwspinlock: qcom: Add support for mmio usage to - sfpb-mutex - -Allow sfpb-mutex to use mmio in addition to syscon. - -Signed-off-by: Christian Marangi -Reviewed-by: Bjorn Andersson -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707102040.1859-1-ansuelsmth@gmail.com ---- - drivers/hwspinlock/qcom_hwspinlock.c | 28 +++++++++++++++++++++++----- - 1 file changed, 23 insertions(+), 5 deletions(-) - ---- a/drivers/hwspinlock/qcom_hwspinlock.c -+++ b/drivers/hwspinlock/qcom_hwspinlock.c -@@ -19,6 +19,11 @@ - #define QCOM_MUTEX_APPS_PROC_ID 1 - #define QCOM_MUTEX_NUM_LOCKS 32 - -+struct qcom_hwspinlock_of_data { -+ u32 offset; -+ u32 stride; -+}; -+ - static int qcom_hwspinlock_trylock(struct hwspinlock *lock) - { - struct regmap_field *field = lock->priv; -@@ -63,9 +68,20 @@ static const struct hwspinlock_ops qcom_ - .unlock = qcom_hwspinlock_unlock, - }; - -+static const struct qcom_hwspinlock_of_data of_sfpb_mutex = { -+ .offset = 0x4, -+ .stride = 0x4, -+}; -+ -+/* All modern platform has offset 0 and stride of 4k */ -+static const struct qcom_hwspinlock_of_data of_tcsr_mutex = { -+ .offset = 0, -+ .stride = 0x1000, -+}; -+ - static const struct of_device_id qcom_hwspinlock_of_match[] = { -- { .compatible = "qcom,sfpb-mutex" }, -- { .compatible = "qcom,tcsr-mutex" }, -+ { .compatible = "qcom,sfpb-mutex", .data = &of_sfpb_mutex }, -+ { .compatible = "qcom,tcsr-mutex", .data = &of_tcsr_mutex }, - { } - }; - MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match); -@@ -112,12 +128,14 @@ static const struct regmap_config tcsr_m - static struct regmap *qcom_hwspinlock_probe_mmio(struct platform_device *pdev, - u32 *offset, u32 *stride) - { -+ const struct qcom_hwspinlock_of_data *data; - struct device *dev = &pdev->dev; - void __iomem *base; - -- /* All modern platform has offset 0 and stride of 4k */ -- *offset = 0; -- *stride = 0x1000; -+ data = of_device_get_match_data(dev); -+ -+ *offset = data->offset; -+ *stride = data->stride; - - base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(base)) diff --git a/target/linux/ipq806x/patches-6.1/105-v6.0-02-ARM-dts-qcom-ipq8064-add-missing-hwlock.patch b/target/linux/ipq806x/patches-6.1/105-v6.0-02-ARM-dts-qcom-ipq8064-add-missing-hwlock.patch deleted file mode 100644 index d8303442f7..0000000000 --- a/target/linux/ipq806x/patches-6.1/105-v6.0-02-ARM-dts-qcom-ipq8064-add-missing-hwlock.patch +++ /dev/null @@ -1,31 +0,0 @@ -From fbe4be367b2169602f6a5949a20d2917b25714d4 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 12:20:39 +0200 -Subject: [PATCH 1/2] ARM: dts: qcom: ipq8064: add missing hwlock - -Add missing hwlock for ipq8064 dtsi provided by qcom,sfpb-mutex. - -Signed-off-by: Christian Marangi -Acked-by: Krzysztof Kozlowski -[bjorn: Moved the node inside /soc] -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707102040.1859-2-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1357,5 +1357,12 @@ - dma-names = "tx", "rx"; - }; - }; -+ -+ sfpb_mutex: hwlock@1200600 { -+ compatible = "qcom,sfpb-mutex"; -+ reg = <0x01200600 0x100>; -+ -+ #hwlock-cells = <1>; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-6.1/105-v6.0-03-ARM-dts-qcom-ipq8064-add-missing-smem-compatible.patch b/target/linux/ipq806x/patches-6.1/105-v6.0-03-ARM-dts-qcom-ipq8064-add-missing-smem-compatible.patch deleted file mode 100644 index 8b91eeb511..0000000000 --- a/target/linux/ipq806x/patches-6.1/105-v6.0-03-ARM-dts-qcom-ipq8064-add-missing-smem-compatible.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4fefb5434c4b735daf913abaef12431405368031 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 12:20:40 +0200 -Subject: [PATCH 2/2] ARM: dts: qcom: ipq8064: add missing smem compatible - -Add missing smem compatible and hwlocks phandle for ipq8064 dtsi -smem node. - -Signed-off-by: Christian Marangi -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220707102040.1859-3-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -292,8 +292,11 @@ - }; - - smem: smem@41000000 { -+ compatible = "qcom,smem"; - reg = <0x41000000 0x200000>; - no-map; -+ -+ hwlocks = <&sfpb_mutex 3>; - }; - }; - diff --git a/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch b/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch deleted file mode 100644 index 8b20a550f6..0000000000 --- a/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch +++ /dev/null @@ -1,129 +0,0 @@ -From 9f7097a8b1948533a6db1b53b5c0480cc75bbd16 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Mon, 18 Jul 2022 18:05:16 +0200 -Subject: [PATCH 1/3] ARM: dts: qcom: ipq8064: add v2 dtsi variant - -Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for -some additional pcie, sata and usb configuration values, additional -reserved memory and serial output. - -Signed-off-by: Christian Marangi ---- - .../boot/dts/qcom-ipq8064-v2.0-smb208.dtsi | 37 ++++++++++ - arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi | 69 +++++++++++++++++++ - 2 files changed, 106 insertions(+) - create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi - create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include "qcom-ipq8064-v2.0.dtsi" -+ -+&rpm { -+ smb208_regulators: regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi -@@ -0,0 +1,69 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include "qcom-ipq8064.dtsi" -+ -+/ { -+ model = "Qualcomm Technologies, Inc. IPQ8064-v2.0"; -+ -+ aliases { -+ serial0 = &gsbi4_serial; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+}; -+ -+&gsbi4 { -+ qcom,mode = ; -+ status = "okay"; -+ -+ serial@16340000 { -+ status = "okay"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+}; -+ -+&pcie0 { -+ compatible = "qcom,pcie-ipq8064-v2"; -+}; -+ -+&pcie1 { -+ compatible = "qcom,pcie-ipq8064-v2"; -+}; -+ -+&pcie2 { -+ compatible = "qcom,pcie-ipq8064-v2"; -+}; -+ -+&sata { -+ ports-implemented = <0x1>; -+}; -+ -+&ss_phy_0 { -+ qcom,rx-eq = <2>; -+ qcom,tx-deamp_3_5db = <32>; -+ qcom,mpll = <5>; -+}; -+ -+&ss_phy_1 { -+ qcom,rx-eq = <2>; -+ qcom,tx-deamp_3_5db = <32>; -+ qcom,mpll = <5>; -+}; diff --git a/target/linux/ipq806x/patches-6.1/106-v6.1-02-ARM-dts-qcom-ipq8064-add-ipq8062-variant.patch b/target/linux/ipq806x/patches-6.1/106-v6.1-02-ARM-dts-qcom-ipq8064-add-ipq8062-variant.patch deleted file mode 100644 index fdff292480..0000000000 --- a/target/linux/ipq806x/patches-6.1/106-v6.1-02-ARM-dts-qcom-ipq8064-add-ipq8062-variant.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 41d9fa8de7845bd92d9c963196fdfd7ea9232bb2 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Mon, 18 Jul 2022 18:07:26 +0200 -Subject: [PATCH 2/3] ARM: dts: qcom: ipq8064: add ipq8062 variant - -ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of -usb port and a reduced voltage output with the smb208 regulators. - -Signed-off-by: Christian Marangi ---- - arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi | 37 ++++++++++++++++++++++ - arch/arm/boot/dts/qcom-ipq8062.dtsi | 8 +++++ - 2 files changed, 45 insertions(+) - create mode 100644 arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi - create mode 100644 arch/arm/boot/dts/qcom-ipq8062.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+#include "qcom-ipq8062.dtsi" -+ -+&rpm { -+ smb208_regulators: regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+#include "qcom-ipq8064-v2.0.dtsi" -+ -+/ { -+ model = "Qualcomm Technologies, Inc. IPQ8062"; -+ compatible = "qcom,ipq8062", "qcom,ipq8064"; -+}; diff --git a/target/linux/ipq806x/patches-6.1/106-v6.1-03-ARM-dts-qcom-ipq8064-add-ipq8065-variant.patch b/target/linux/ipq806x/patches-6.1/106-v6.1-03-ARM-dts-qcom-ipq8064-add-ipq8065-variant.patch deleted file mode 100644 index bccc577b91..0000000000 --- a/target/linux/ipq806x/patches-6.1/106-v6.1-03-ARM-dts-qcom-ipq8064-add-ipq8065-variant.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 01e7aa3fe6f76f7960f2382038136235eee9c6cd Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Mon, 18 Jul 2022 18:09:35 +0200 -Subject: [PATCH 3/3] ARM: dts: qcom: ipq8064: add ipq8065 variant - -ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and -an increased voltage output with the smb208 regulators. - -Signed-off-by: Christian Marangi ---- - arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi | 37 ++++++++++++++++++++++ - arch/arm/boot/dts/qcom-ipq8065.dtsi | 8 +++++ - 2 files changed, 45 insertions(+) - create mode 100644 arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi - create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include "qcom-ipq8065.dtsi" -+ -+&rpm { -+ smb208_regulators: regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = <775000>; -+ regulator-max-microvolt = <1275000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = <775000>; -+ regulator-max-microvolt = <1275000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include "qcom-ipq8064-v2.0.dtsi" -+ -+/ { -+ model = "Qualcomm Technologies, Inc. IPQ8065"; -+ compatible = "qcom,ipq8065", "qcom,ipq8064"; -+}; diff --git a/target/linux/ipq806x/patches-6.1/109-v6.1-01-dt-bindings-clock-add-pcm-reset-for-ipq806x-lcc.patch b/target/linux/ipq806x/patches-6.1/109-v6.1-01-dt-bindings-clock-add-pcm-reset-for-ipq806x-lcc.patch deleted file mode 100644 index 72e70b613c..0000000000 --- a/target/linux/ipq806x/patches-6.1/109-v6.1-01-dt-bindings-clock-add-pcm-reset-for-ipq806x-lcc.patch +++ /dev/null @@ -1,29 +0,0 @@ -From fc7dc1d0c10e8e3d72b68ddae8a61c8aa02a62c1 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 15 Jun 2022 17:13:32 +0200 -Subject: [PATCH v4 1/3] dt-bindings: clock: add pcm reset for ipq806x lcc - -Add pcm reset define for ipq806x lcc. - -Signed-off-by: Christian Marangi -Reviewed-by: Dmitry Baryshkov -Acked-by: Rob Herring ---- -v3: - - Added review tag - - Added ack tag -v2: - - Fix Sob tag - - include/dt-bindings/clock/qcom,lcc-ipq806x.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/include/dt-bindings/clock/qcom,lcc-ipq806x.h -+++ b/include/dt-bindings/clock/qcom,lcc-ipq806x.h -@@ -19,4 +19,6 @@ - #define SPDIF_CLK 10 - #define AHBIX_CLK 11 - -+#define LCC_PCM_RESET 0 -+ - #endif diff --git a/target/linux/ipq806x/patches-6.1/109-v6.1-02-clk-qcom-lcc-ipq806x-add-reset-definition.patch b/target/linux/ipq806x/patches-6.1/109-v6.1-02-clk-qcom-lcc-ipq806x-add-reset-definition.patch deleted file mode 100644 index 2393651306..0000000000 --- a/target/linux/ipq806x/patches-6.1/109-v6.1-02-clk-qcom-lcc-ipq806x-add-reset-definition.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 3587d768bdf4683a53244be1acca5d095044671f Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 15 Jun 2022 17:19:55 +0200 -Subject: [PATCH v4 2/3] clk: qcom: lcc-ipq806x: add reset definition - -Add reset definition for lcc-ipq806x. - -Signed-off-by: Christian Marangi -Reviewed-by: Dmitry Baryshkov ---- -v3: - - Added review tag -v2: - - Fix Sob tag - - drivers/clk/qcom/lcc-ipq806x.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/clk/qcom/lcc-ipq806x.c -+++ b/drivers/clk/qcom/lcc-ipq806x.c -@@ -22,6 +22,7 @@ - #include "clk-branch.h" - #include "clk-regmap-divider.h" - #include "clk-regmap-mux.h" -+#include "reset.h" - - static struct clk_pll pll4 = { - .l_reg = 0x4, -@@ -405,6 +406,10 @@ static struct clk_regmap *lcc_ipq806x_cl - [AHBIX_CLK] = &ahbix_clk.clkr, - }; - -+static const struct qcom_reset_map lcc_ipq806x_resets[] = { -+ [LCC_PCM_RESET] = { 0x54, 13 }, -+}; -+ - static const struct regmap_config lcc_ipq806x_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, -@@ -417,6 +422,8 @@ static const struct qcom_cc_desc lcc_ipq - .config = &lcc_ipq806x_regmap_config, - .clks = lcc_ipq806x_clks, - .num_clks = ARRAY_SIZE(lcc_ipq806x_clks), -+ .resets = lcc_ipq806x_resets, -+ .num_resets = ARRAY_SIZE(lcc_ipq806x_resets), - }; - - static const struct of_device_id lcc_ipq806x_match_table[] = { diff --git a/target/linux/ipq806x/patches-6.1/109-v6.1-03-clk-qcom-lcc-ipq806x-convert-to-parent-data.patch b/target/linux/ipq806x/patches-6.1/109-v6.1-03-clk-qcom-lcc-ipq806x-convert-to-parent-data.patch deleted file mode 100644 index 905dc5bf40..0000000000 --- a/target/linux/ipq806x/patches-6.1/109-v6.1-03-clk-qcom-lcc-ipq806x-convert-to-parent-data.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 92ef900a4a53b62e0dc32554eb088a422657606c Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 15 Jun 2022 17:35:13 +0200 -Subject: [PATCH v5 3/3] clk: qcom: lcc-ipq806x: convert to parent data - -Convert lcc-ipq806x driver to parent_data API. - -Signed-off-by: Christian Marangi ---- -v5: -- Fix the same compilation error (don't know what the hell happen - to my buildroot) -v4: -- Fix compilation error -v3: - - Inline pxo pll4 parent - - Change .name from pxo to pxo_board - - drivers/clk/qcom/lcc-ipq806x.c | 77 ++++++++++++++++++---------------- - 1 file changed, 42 insertions(+), 35 deletions(-) - ---- a/drivers/clk/qcom/lcc-ipq806x.c -+++ b/drivers/clk/qcom/lcc-ipq806x.c -@@ -34,7 +34,9 @@ static struct clk_pll pll4 = { - .status_bit = 16, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pll4", -- .parent_names = (const char *[]){ "pxo" }, -+ .parent_data = &(const struct clk_parent_data) { -+ .fw_name = "pxo", .name = "pxo_board", -+ }, - .num_parents = 1, - .ops = &clk_pll_ops, - }, -@@ -64,9 +66,9 @@ static const struct parent_map lcc_pxo_p - { P_PLL4, 2 } - }; - --static const char * const lcc_pxo_pll4[] = { -- "pxo", -- "pll4_vote", -+static const struct clk_parent_data lcc_pxo_pll4[] = { -+ { .fw_name = "pxo", .name = "pxo" }, -+ { .fw_name = "pll4_vote", .name = "pll4_vote" }, - }; - - static struct freq_tbl clk_tbl_aif_mi2s[] = { -@@ -131,18 +133,14 @@ static struct clk_rcg mi2s_osr_src = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "mi2s_osr_src", -- .parent_names = lcc_pxo_pll4, -- .num_parents = 2, -+ .parent_data = lcc_pxo_pll4, -+ .num_parents = ARRAY_SIZE(lcc_pxo_pll4), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, - }, - }; - --static const char * const lcc_mi2s_parents[] = { -- "mi2s_osr_src", --}; -- - static struct clk_branch mi2s_osr_clk = { - .halt_reg = 0x50, - .halt_bit = 1, -@@ -152,7 +150,9 @@ static struct clk_branch mi2s_osr_clk = - .enable_mask = BIT(17), - .hw.init = &(struct clk_init_data){ - .name = "mi2s_osr_clk", -- .parent_names = lcc_mi2s_parents, -+ .parent_hws = (const struct clk_hw*[]){ -+ &mi2s_osr_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -167,7 +167,9 @@ static struct clk_regmap_div mi2s_div_cl - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "mi2s_div_clk", -- .parent_names = lcc_mi2s_parents, -+ .parent_hws = (const struct clk_hw*[]){ -+ &mi2s_osr_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - }, -@@ -183,7 +185,9 @@ static struct clk_branch mi2s_bit_div_cl - .enable_mask = BIT(15), - .hw.init = &(struct clk_init_data){ - .name = "mi2s_bit_div_clk", -- .parent_names = (const char *[]){ "mi2s_div_clk" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &mi2s_div_clk.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -191,6 +195,10 @@ static struct clk_branch mi2s_bit_div_cl - }, - }; - -+static const struct clk_parent_data lcc_mi2s_bit_div_codec_clk[] = { -+ { .hw = &mi2s_bit_div_clk.clkr.hw, }, -+ { .fw_name = "mi2s_codec_clk", .name = "mi2s_codec_clk" }, -+}; - - static struct clk_regmap_mux mi2s_bit_clk = { - .reg = 0x48, -@@ -199,11 +207,8 @@ static struct clk_regmap_mux mi2s_bit_cl - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "mi2s_bit_clk", -- .parent_names = (const char *[]){ -- "mi2s_bit_div_clk", -- "mi2s_codec_clk", -- }, -- .num_parents = 2, -+ .parent_data = lcc_mi2s_bit_div_codec_clk, -+ .num_parents = ARRAY_SIZE(lcc_mi2s_bit_div_codec_clk), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -245,8 +250,8 @@ static struct clk_rcg pcm_src = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "pcm_src", -- .parent_names = lcc_pxo_pll4, -- .num_parents = 2, -+ .parent_data = lcc_pxo_pll4, -+ .num_parents = ARRAY_SIZE(lcc_pxo_pll4), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, -@@ -262,7 +267,9 @@ static struct clk_branch pcm_clk_out = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "pcm_clk_out", -- .parent_names = (const char *[]){ "pcm_src" }, -+ .parent_hws = (const struct clk_hw*[]){ -+ &pcm_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -270,6 +277,11 @@ static struct clk_branch pcm_clk_out = { - }, - }; - -+static const struct clk_parent_data lcc_pcm_clk_out_codec_clk[] = { -+ { .hw = &pcm_clk_out.clkr.hw, }, -+ { .fw_name = "pcm_codec_clk", .name = "pcm_codec_clk" }, -+}; -+ - static struct clk_regmap_mux pcm_clk = { - .reg = 0x54, - .shift = 10, -@@ -277,11 +289,8 @@ static struct clk_regmap_mux pcm_clk = { - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "pcm_clk", -- .parent_names = (const char *[]){ -- "pcm_clk_out", -- "pcm_codec_clk", -- }, -- .num_parents = 2, -+ .parent_data = lcc_pcm_clk_out_codec_clk, -+ .num_parents = ARRAY_SIZE(lcc_pcm_clk_out_codec_clk), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -325,18 +334,14 @@ static struct clk_rcg spdif_src = { - .enable_mask = BIT(9), - .hw.init = &(struct clk_init_data){ - .name = "spdif_src", -- .parent_names = lcc_pxo_pll4, -- .num_parents = 2, -+ .parent_data = lcc_pxo_pll4, -+ .num_parents = ARRAY_SIZE(lcc_pxo_pll4), - .ops = &clk_rcg_ops, - .flags = CLK_SET_RATE_GATE, - }, - }, - }; - --static const char * const lcc_spdif_parents[] = { -- "spdif_src", --}; -- - static struct clk_branch spdif_clk = { - .halt_reg = 0xd4, - .halt_bit = 1, -@@ -346,7 +351,9 @@ static struct clk_branch spdif_clk = { - .enable_mask = BIT(12), - .hw.init = &(struct clk_init_data){ - .name = "spdif_clk", -- .parent_names = lcc_spdif_parents, -+ .parent_hws = (const struct clk_hw*[]){ -+ &spdif_src.clkr.hw, -+ }, - .num_parents = 1, - .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -384,8 +391,8 @@ static struct clk_rcg ahbix_clk = { - .enable_mask = BIT(11), - .hw.init = &(struct clk_init_data){ - .name = "ahbix", -- .parent_names = lcc_pxo_pll4, -- .num_parents = 2, -+ .parent_data = lcc_pxo_pll4, -+ .num_parents = ARRAY_SIZE(lcc_pxo_pll4), - .ops = &clk_rcg_lcc_ops, - }, - }, diff --git a/target/linux/ipq806x/patches-6.1/111-v5.19-01-PM-devfreq-Export-devfreq_get_freq_range-symbol-with.patch b/target/linux/ipq806x/patches-6.1/111-v5.19-01-PM-devfreq-Export-devfreq_get_freq_range-symbol-with.patch deleted file mode 100644 index 6b7a68952e..0000000000 --- a/target/linux/ipq806x/patches-6.1/111-v5.19-01-PM-devfreq-Export-devfreq_get_freq_range-symbol-with.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 713472e53e6e53c985e283782b0fd76b8ecfd47e Mon Sep 17 00:00:00 2001 -From: Chanwoo Choi -Date: Mon, 1 Mar 2021 02:07:29 +0900 -Subject: [PATCH 1/5] PM / devfreq: Export devfreq_get_freq_range symbol within - devfreq - -In order to get frequency range within devfreq governors, -export devfreq_get_freq_range symbol within devfreq. - -Reviewed-by: Matthias Kaehlcke -Tested-by: Chen-Yu Tsai -Tested-by: Johnson Wang -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/devfreq.c | 20 ++++++++++++-------- - drivers/devfreq/governor.h | 2 ++ - 2 files changed, 14 insertions(+), 8 deletions(-) - ---- a/drivers/devfreq/devfreq.c -+++ b/drivers/devfreq/devfreq.c -@@ -112,16 +112,16 @@ static unsigned long find_available_max_ - } - - /** -- * get_freq_range() - Get the current freq range -+ * devfreq_get_freq_range() - Get the current freq range - * @devfreq: the devfreq instance - * @min_freq: the min frequency - * @max_freq: the max frequency - * - * This takes into consideration all constraints. - */ --static void get_freq_range(struct devfreq *devfreq, -- unsigned long *min_freq, -- unsigned long *max_freq) -+void devfreq_get_freq_range(struct devfreq *devfreq, -+ unsigned long *min_freq, -+ unsigned long *max_freq) - { - unsigned long *freq_table = devfreq->profile->freq_table; - s32 qos_min_freq, qos_max_freq; -@@ -158,6 +158,7 @@ static void get_freq_range(struct devfre - if (*min_freq > *max_freq) - *min_freq = *max_freq; - } -+EXPORT_SYMBOL(devfreq_get_freq_range); - - /** - * devfreq_get_freq_level() - Lookup freq_table for the frequency -@@ -418,7 +419,7 @@ int devfreq_update_target(struct devfreq - err = devfreq->governor->get_target_freq(devfreq, &freq); - if (err) - return err; -- get_freq_range(devfreq, &min_freq, &max_freq); -+ devfreq_get_freq_range(devfreq, &min_freq, &max_freq); - - if (freq < min_freq) { - freq = min_freq; -@@ -784,6 +785,7 @@ struct devfreq *devfreq_add_device(struc - { - struct devfreq *devfreq; - struct devfreq_governor *governor; -+ unsigned long min_freq, max_freq; - int err = 0; - - if (!dev || !profile || !governor_name) { -@@ -848,6 +850,8 @@ struct devfreq *devfreq_add_device(struc - goto err_dev; - } - -+ devfreq_get_freq_range(devfreq, &min_freq, &max_freq); -+ - devfreq->suspend_freq = dev_pm_opp_get_suspend_opp_freq(dev); - devfreq->opp_table = dev_pm_opp_get_opp_table(dev); - if (IS_ERR(devfreq->opp_table)) -@@ -1559,7 +1563,7 @@ static ssize_t min_freq_show(struct devi - unsigned long min_freq, max_freq; - - mutex_lock(&df->lock); -- get_freq_range(df, &min_freq, &max_freq); -+ devfreq_get_freq_range(df, &min_freq, &max_freq); - mutex_unlock(&df->lock); - - return sprintf(buf, "%lu\n", min_freq); -@@ -1613,7 +1617,7 @@ static ssize_t max_freq_show(struct devi - unsigned long min_freq, max_freq; - - mutex_lock(&df->lock); -- get_freq_range(df, &min_freq, &max_freq); -+ devfreq_get_freq_range(df, &min_freq, &max_freq); - mutex_unlock(&df->lock); - - return sprintf(buf, "%lu\n", max_freq); -@@ -1927,7 +1931,7 @@ static int devfreq_summary_show(struct s - - mutex_lock(&devfreq->lock); - cur_freq = devfreq->previous_freq; -- get_freq_range(devfreq, &min_freq, &max_freq); -+ devfreq_get_freq_range(devfreq, &min_freq, &max_freq); - timer = devfreq->profile->timer; - - if (IS_SUPPORTED_ATTR(devfreq->governor->attrs, POLLING_INTERVAL)) ---- a/drivers/devfreq/governor.h -+++ b/drivers/devfreq/governor.h -@@ -86,6 +86,8 @@ int devfreq_remove_governor(struct devfr - - int devfreq_update_status(struct devfreq *devfreq, unsigned long freq); - int devfreq_update_target(struct devfreq *devfreq, unsigned long freq); -+void devfreq_get_freq_range(struct devfreq *devfreq, unsigned long *min_freq, -+ unsigned long *max_freq); - - static inline int devfreq_update_stats(struct devfreq *df) - { diff --git a/target/linux/ipq806x/patches-6.1/111-v5.19-02-PM-devfreq-Add-cpu-based-scaling-support-to-passive-.patch b/target/linux/ipq806x/patches-6.1/111-v5.19-02-PM-devfreq-Add-cpu-based-scaling-support-to-passive-.patch deleted file mode 100644 index 3dd61985b2..0000000000 --- a/target/linux/ipq806x/patches-6.1/111-v5.19-02-PM-devfreq-Add-cpu-based-scaling-support-to-passive-.patch +++ /dev/null @@ -1,461 +0,0 @@ -From a03dacb0316f74400846aaf144d6c73f4217ca08 Mon Sep 17 00:00:00 2001 -From: Saravana Kannan -Date: Tue, 2 Mar 2021 15:58:21 +0900 -Subject: [PATCH 2/5] PM / devfreq: Add cpu based scaling support to passive - governor - -Many CPU architectures have caches that can scale independent of the -CPUs. Frequency scaling of the caches is necessary to make sure that the -cache is not a performance bottleneck that leads to poor performance and -power. The same idea applies for RAM/DDR. - -To achieve this, this patch adds support for cpu based scaling to the -passive governor. This is accomplished by taking the current frequency -of each CPU frequency domain and then adjust the frequency of the cache -(or any devfreq device) based on the frequency of the CPUs. It listens -to CPU frequency transition notifiers to keep itself up to date on the -current CPU frequency. - -To decide the frequency of the device, the governor does one of the -following: -* Derives the optimal devfreq device opp from required-opps property of - the parent cpu opp_table. - -* Scales the device frequency in proportion to the CPU frequency. So, if - the CPUs are running at their max frequency, the device runs at its - max frequency. If the CPUs are running at their min frequency, the - device runs at its min frequency. It is interpolated for frequencies - in between. - -Tested-by: Chen-Yu Tsai -Tested-by: Johnson Wang -Signed-off-by: Saravana Kannan -[Sibi: Integrated cpu-freqmap governor into passive_governor] -Signed-off-by: Sibi Sankar -[Chanwoo: Fix conflict with latest code and cleanup code] -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/governor.h | 22 +++ - drivers/devfreq/governor_passive.c | 298 +++++++++++++++++++++++++++-- - include/linux/devfreq.h | 17 +- - 3 files changed, 323 insertions(+), 14 deletions(-) - ---- a/drivers/devfreq/governor.h -+++ b/drivers/devfreq/governor.h -@@ -48,6 +48,28 @@ - #define DEVFREQ_GOV_ATTR_TIMER BIT(1) - - /** -+ * struct devfreq_cpu_data - Hold the per-cpu data -+ * @dev: reference to cpu device. -+ * @first_cpu: the cpumask of the first cpu of a policy. -+ * @opp_table: reference to cpu opp table. -+ * @cur_freq: the current frequency of the cpu. -+ * @min_freq: the min frequency of the cpu. -+ * @max_freq: the max frequency of the cpu. -+ * -+ * This structure stores the required cpu_data of a cpu. -+ * This is auto-populated by the governor. -+ */ -+struct devfreq_cpu_data { -+ struct device *dev; -+ unsigned int first_cpu; -+ -+ struct opp_table *opp_table; -+ unsigned int cur_freq; -+ unsigned int min_freq; -+ unsigned int max_freq; -+}; -+ -+/** - * struct devfreq_governor - Devfreq policy governor - * @node: list node - contains registered devfreq governors - * @name: Governor's name ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -8,11 +8,85 @@ - */ - - #include -+#include -+#include -+#include -+#include - #include - #include - #include "governor.h" - --static int devfreq_passive_get_target_freq(struct devfreq *devfreq, -+#define HZ_PER_KHZ 1000 -+ -+static unsigned long get_target_freq_by_required_opp(struct device *p_dev, -+ struct opp_table *p_opp_table, -+ struct opp_table *opp_table, -+ unsigned long *freq) -+{ -+ struct dev_pm_opp *opp = NULL, *p_opp = NULL; -+ unsigned long target_freq; -+ -+ if (!p_dev || !p_opp_table || !opp_table || !freq) -+ return 0; -+ -+ p_opp = devfreq_recommended_opp(p_dev, freq, 0); -+ if (IS_ERR(p_opp)) -+ return 0; -+ -+ opp = dev_pm_opp_xlate_required_opp(p_opp_table, opp_table, p_opp); -+ dev_pm_opp_put(p_opp); -+ -+ if (IS_ERR(opp)) -+ return 0; -+ -+ target_freq = dev_pm_opp_get_freq(opp); -+ dev_pm_opp_put(opp); -+ -+ return target_freq; -+} -+ -+static int get_target_freq_with_cpufreq(struct devfreq *devfreq, -+ unsigned long *target_freq) -+{ -+ struct devfreq_passive_data *p_data = -+ (struct devfreq_passive_data *)devfreq->data; -+ struct devfreq_cpu_data *parent_cpu_data; -+ unsigned long cpu, cpu_cur, cpu_min, cpu_max, cpu_percent; -+ unsigned long dev_min, dev_max; -+ unsigned long freq = 0; -+ -+ for_each_online_cpu(cpu) { -+ parent_cpu_data = p_data->parent_cpu_data[cpu]; -+ if (!parent_cpu_data || parent_cpu_data->first_cpu != cpu) -+ continue; -+ -+ /* Get target freq via required opps */ -+ cpu_cur = parent_cpu_data->cur_freq * HZ_PER_KHZ; -+ freq = get_target_freq_by_required_opp(parent_cpu_data->dev, -+ parent_cpu_data->opp_table, -+ devfreq->opp_table, &cpu_cur); -+ if (freq) { -+ *target_freq = max(freq, *target_freq); -+ continue; -+ } -+ -+ /* Use interpolation if required opps is not available */ -+ devfreq_get_freq_range(devfreq, &dev_min, &dev_max); -+ -+ cpu_min = parent_cpu_data->min_freq; -+ cpu_max = parent_cpu_data->max_freq; -+ cpu_cur = parent_cpu_data->cur_freq; -+ -+ cpu_percent = ((cpu_cur - cpu_min) * 100) / (cpu_max - cpu_min); -+ freq = dev_min + mult_frac(dev_max - dev_min, cpu_percent, 100); -+ -+ *target_freq = max(freq, *target_freq); -+ } -+ -+ return 0; -+} -+ -+static int get_target_freq_with_devfreq(struct devfreq *devfreq, - unsigned long *freq) - { - struct devfreq_passive_data *p_data -@@ -99,6 +173,181 @@ no_required_opp: - return 0; - } - -+static int devfreq_passive_get_target_freq(struct devfreq *devfreq, -+ unsigned long *freq) -+{ -+ struct devfreq_passive_data *p_data = -+ (struct devfreq_passive_data *)devfreq->data; -+ int ret; -+ -+ if (!p_data) -+ return -EINVAL; -+ -+ /* -+ * If the devfreq device with passive governor has the specific method -+ * to determine the next frequency, should use the get_target_freq() -+ * of struct devfreq_passive_data. -+ */ -+ if (p_data->get_target_freq) -+ return p_data->get_target_freq(devfreq, freq); -+ -+ switch (p_data->parent_type) { -+ case DEVFREQ_PARENT_DEV: -+ ret = get_target_freq_with_devfreq(devfreq, freq); -+ break; -+ case CPUFREQ_PARENT_DEV: -+ ret = get_target_freq_with_cpufreq(devfreq, freq); -+ break; -+ default: -+ ret = -EINVAL; -+ dev_err(&devfreq->dev, "Invalid parent type\n"); -+ break; -+ } -+ -+ return ret; -+} -+ -+static int cpufreq_passive_notifier_call(struct notifier_block *nb, -+ unsigned long event, void *ptr) -+{ -+ struct devfreq_passive_data *p_data = -+ container_of(nb, struct devfreq_passive_data, nb); -+ struct devfreq *devfreq = (struct devfreq *)p_data->this; -+ struct devfreq_cpu_data *parent_cpu_data; -+ struct cpufreq_freqs *freqs = ptr; -+ unsigned int cur_freq; -+ int ret; -+ -+ if (event != CPUFREQ_POSTCHANGE || !freqs || -+ !p_data->parent_cpu_data[freqs->policy->cpu]) -+ return 0; -+ -+ parent_cpu_data = p_data->parent_cpu_data[freqs->policy->cpu]; -+ if (parent_cpu_data->cur_freq == freqs->new) -+ return 0; -+ -+ cur_freq = parent_cpu_data->cur_freq; -+ parent_cpu_data->cur_freq = freqs->new; -+ -+ mutex_lock(&devfreq->lock); -+ ret = devfreq_update_target(devfreq, freqs->new); -+ mutex_unlock(&devfreq->lock); -+ if (ret) { -+ parent_cpu_data->cur_freq = cur_freq; -+ dev_err(&devfreq->dev, "failed to update the frequency.\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq) -+{ -+ struct devfreq_passive_data *p_data -+ = (struct devfreq_passive_data *)devfreq->data; -+ struct devfreq_cpu_data *parent_cpu_data; -+ int cpu, ret; -+ -+ if (p_data->nb.notifier_call) { -+ ret = cpufreq_unregister_notifier(&p_data->nb, -+ CPUFREQ_TRANSITION_NOTIFIER); -+ if (ret < 0) -+ return ret; -+ } -+ -+ for_each_possible_cpu(cpu) { -+ parent_cpu_data = p_data->parent_cpu_data[cpu]; -+ if (!parent_cpu_data) -+ continue; -+ -+ if (parent_cpu_data->opp_table) -+ dev_pm_opp_put_opp_table(parent_cpu_data->opp_table); -+ kfree(parent_cpu_data); -+ } -+ -+ return 0; -+} -+ -+static int cpufreq_passive_register_notifier(struct devfreq *devfreq) -+{ -+ struct devfreq_passive_data *p_data -+ = (struct devfreq_passive_data *)devfreq->data; -+ struct device *dev = devfreq->dev.parent; -+ struct opp_table *opp_table = NULL; -+ struct devfreq_cpu_data *parent_cpu_data; -+ struct cpufreq_policy *policy; -+ struct device *cpu_dev; -+ unsigned int cpu; -+ int ret; -+ -+ p_data->nb.notifier_call = cpufreq_passive_notifier_call; -+ ret = cpufreq_register_notifier(&p_data->nb, CPUFREQ_TRANSITION_NOTIFIER); -+ if (ret) { -+ dev_err(dev, "failed to register cpufreq notifier\n"); -+ p_data->nb.notifier_call = NULL; -+ goto err; -+ } -+ -+ for_each_possible_cpu(cpu) { -+ if (p_data->parent_cpu_data[cpu]) -+ continue; -+ -+ policy = cpufreq_cpu_get(cpu); -+ if (!policy) { -+ ret = -EPROBE_DEFER; -+ goto err; -+ } -+ -+ parent_cpu_data = kzalloc(sizeof(*parent_cpu_data), -+ GFP_KERNEL); -+ if (!parent_cpu_data) { -+ ret = -ENOMEM; -+ goto err_put_policy; -+ } -+ -+ cpu_dev = get_cpu_device(cpu); -+ if (!cpu_dev) { -+ dev_err(dev, "failed to get cpu device\n"); -+ ret = -ENODEV; -+ goto err_free_cpu_data; -+ } -+ -+ opp_table = dev_pm_opp_get_opp_table(cpu_dev); -+ if (IS_ERR(opp_table)) { -+ dev_err(dev, "failed to get opp_table of cpu%d\n", cpu); -+ ret = PTR_ERR(opp_table); -+ goto err_free_cpu_data; -+ } -+ -+ parent_cpu_data->dev = cpu_dev; -+ parent_cpu_data->opp_table = opp_table; -+ parent_cpu_data->first_cpu = cpumask_first(policy->related_cpus); -+ parent_cpu_data->cur_freq = policy->cur; -+ parent_cpu_data->min_freq = policy->cpuinfo.min_freq; -+ parent_cpu_data->max_freq = policy->cpuinfo.max_freq; -+ -+ p_data->parent_cpu_data[cpu] = parent_cpu_data; -+ cpufreq_cpu_put(policy); -+ } -+ -+ mutex_lock(&devfreq->lock); -+ ret = devfreq_update_target(devfreq, 0L); -+ mutex_unlock(&devfreq->lock); -+ if (ret) -+ dev_err(dev, "failed to update the frequency\n"); -+ -+ return ret; -+ -+err_free_cpu_data: -+ kfree(parent_cpu_data); -+err_put_policy: -+ cpufreq_cpu_put(policy); -+err: -+ WARN_ON(cpufreq_passive_unregister_notifier(devfreq)); -+ -+ return ret; -+} -+ - static int devfreq_passive_notifier_call(struct notifier_block *nb, - unsigned long event, void *ptr) - { -@@ -131,30 +380,55 @@ static int devfreq_passive_notifier_call - return NOTIFY_DONE; - } - --static int devfreq_passive_event_handler(struct devfreq *devfreq, -- unsigned int event, void *data) -+static int devfreq_passive_unregister_notifier(struct devfreq *devfreq) -+{ -+ struct devfreq_passive_data *p_data -+ = (struct devfreq_passive_data *)devfreq->data; -+ struct devfreq *parent = (struct devfreq *)p_data->parent; -+ struct notifier_block *nb = &p_data->nb; -+ -+ return devfreq_unregister_notifier(parent, nb, DEVFREQ_TRANSITION_NOTIFIER); -+} -+ -+static int devfreq_passive_register_notifier(struct devfreq *devfreq) - { - struct devfreq_passive_data *p_data - = (struct devfreq_passive_data *)devfreq->data; - struct devfreq *parent = (struct devfreq *)p_data->parent; - struct notifier_block *nb = &p_data->nb; -- int ret = 0; - - if (!parent) - return -EPROBE_DEFER; - -+ nb->notifier_call = devfreq_passive_notifier_call; -+ return devfreq_register_notifier(parent, nb, DEVFREQ_TRANSITION_NOTIFIER); -+} -+ -+static int devfreq_passive_event_handler(struct devfreq *devfreq, -+ unsigned int event, void *data) -+{ -+ struct devfreq_passive_data *p_data -+ = (struct devfreq_passive_data *)devfreq->data; -+ int ret = -EINVAL; -+ -+ if (!p_data) -+ return -EINVAL; -+ -+ if (!p_data->this) -+ p_data->this = devfreq; -+ - switch (event) { - case DEVFREQ_GOV_START: -- if (!p_data->this) -- p_data->this = devfreq; -- -- nb->notifier_call = devfreq_passive_notifier_call; -- ret = devfreq_register_notifier(parent, nb, -- DEVFREQ_TRANSITION_NOTIFIER); -+ if (p_data->parent_type == DEVFREQ_PARENT_DEV) -+ ret = devfreq_passive_register_notifier(devfreq); -+ else if (p_data->parent_type == CPUFREQ_PARENT_DEV) -+ ret = cpufreq_passive_register_notifier(devfreq); - break; - case DEVFREQ_GOV_STOP: -- WARN_ON(devfreq_unregister_notifier(parent, nb, -- DEVFREQ_TRANSITION_NOTIFIER)); -+ if (p_data->parent_type == DEVFREQ_PARENT_DEV) -+ WARN_ON(devfreq_passive_unregister_notifier(devfreq)); -+ else if (p_data->parent_type == CPUFREQ_PARENT_DEV) -+ WARN_ON(cpufreq_passive_unregister_notifier(devfreq)); - break; - default: - break; ---- a/include/linux/devfreq.h -+++ b/include/linux/devfreq.h -@@ -38,6 +38,7 @@ enum devfreq_timer { - - struct devfreq; - struct devfreq_governor; -+struct devfreq_cpu_data; - struct thermal_cooling_device; - - /** -@@ -289,6 +290,11 @@ struct devfreq_simple_ondemand_data { - #endif - - #if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) -+enum devfreq_parent_dev_type { -+ DEVFREQ_PARENT_DEV, -+ CPUFREQ_PARENT_DEV, -+}; -+ - /** - * struct devfreq_passive_data - ``void *data`` fed to struct devfreq - * and devfreq_add_device -@@ -300,8 +306,11 @@ struct devfreq_simple_ondemand_data { - * using governors except for passive governor. - * If the devfreq device has the specific method to decide - * the next frequency, should use this callback. -- * @this: the devfreq instance of own device. -- * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER list -+ * @parent_type: the parent type of the device. -+ * @this: the devfreq instance of own device. -+ * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER or -+ * CPUFREQ_TRANSITION_NOTIFIER list. -+ * @parent_cpu_data: the state min/max/current frequency of all online cpu's. - * - * The devfreq_passive_data have to set the devfreq instance of parent - * device with governors except for the passive governor. But, don't need to -@@ -315,9 +324,13 @@ struct devfreq_passive_data { - /* Optional callback to decide the next frequency of passvice device */ - int (*get_target_freq)(struct devfreq *this, unsigned long *freq); - -+ /* Should set the type of parent device */ -+ enum devfreq_parent_dev_type parent_type; -+ - /* For passive governor's internal use. Don't need to set them */ - struct devfreq *this; - struct notifier_block nb; -+ struct devfreq_cpu_data *parent_cpu_data[NR_CPUS]; - }; - #endif - diff --git a/target/linux/ipq806x/patches-6.1/111-v5.19-03-PM-devfreq-passive-Reduce-duplicate-code-when-passiv.patch b/target/linux/ipq806x/patches-6.1/111-v5.19-03-PM-devfreq-passive-Reduce-duplicate-code-when-passiv.patch deleted file mode 100644 index cb10bd1b62..0000000000 --- a/target/linux/ipq806x/patches-6.1/111-v5.19-03-PM-devfreq-passive-Reduce-duplicate-code-when-passiv.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 05723e71234b60a1a47313ea1a889797ec648f1c Mon Sep 17 00:00:00 2001 -From: Chanwoo Choi -Date: Tue, 2 Mar 2021 17:22:50 +0900 -Subject: [PATCH 3/5] PM / devfreq: passive: Reduce duplicate code when - passive_devfreq case - -In order to keep the consistent coding style between passive_devfreq -and passive_cpufreq, use common code for handling required opp property. -Also remove the unneed conditional statement and unify the comment -of both passive_devfreq and passive_cpufreq when getting the target frequency. - -Tested-by: Chen-Yu Tsai -Tested-by: Johnson Wang -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/governor_passive.c | 66 ++++-------------------------- - 1 file changed, 8 insertions(+), 58 deletions(-) - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -93,65 +93,16 @@ static int get_target_freq_with_devfreq( - = (struct devfreq_passive_data *)devfreq->data; - struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent; - unsigned long child_freq = ULONG_MAX; -- struct dev_pm_opp *opp, *p_opp; - int i, count; - -- /* -- * If the devfreq device with passive governor has the specific method -- * to determine the next frequency, should use the get_target_freq() -- * of struct devfreq_passive_data. -- */ -- if (p_data->get_target_freq) -- return p_data->get_target_freq(devfreq, freq); -- -- /* -- * If the parent and passive devfreq device uses the OPP table, -- * get the next frequency by using the OPP table. -- */ -- -- /* -- * - parent devfreq device uses the governors except for passive. -- * - passive devfreq device uses the passive governor. -- * -- * Each devfreq has the OPP table. After deciding the new frequency -- * from the governor of parent devfreq device, the passive governor -- * need to get the index of new frequency on OPP table of parent -- * device. And then the index is used for getting the suitable -- * new frequency for passive devfreq device. -- */ -- if (!devfreq->profile || !devfreq->profile->freq_table -- || devfreq->profile->max_state <= 0) -- return -EINVAL; -- -- /* -- * The passive governor have to get the correct frequency from OPP -- * list of parent device. Because in this case, *freq is temporary -- * value which is decided by ondemand governor. -- */ -- if (devfreq->opp_table && parent_devfreq->opp_table) { -- p_opp = devfreq_recommended_opp(parent_devfreq->dev.parent, -- freq, 0); -- if (IS_ERR(p_opp)) -- return PTR_ERR(p_opp); -- -- opp = dev_pm_opp_xlate_required_opp(parent_devfreq->opp_table, -- devfreq->opp_table, p_opp); -- dev_pm_opp_put(p_opp); -- -- if (IS_ERR(opp)) -- goto no_required_opp; -- -- *freq = dev_pm_opp_get_freq(opp); -- dev_pm_opp_put(opp); -- -- return 0; -- } -+ /* Get target freq via required opps */ -+ child_freq = get_target_freq_by_required_opp(parent_devfreq->dev.parent, -+ parent_devfreq->opp_table, -+ devfreq->opp_table, freq); -+ if (child_freq) -+ goto out; - --no_required_opp: -- /* -- * Get the OPP table's index of decided frequency by governor -- * of parent device. -- */ -+ /* Use interpolation if required opps is not available */ - for (i = 0; i < parent_devfreq->profile->max_state; i++) - if (parent_devfreq->profile->freq_table[i] == *freq) - break; -@@ -159,7 +110,6 @@ no_required_opp: - if (i == parent_devfreq->profile->max_state) - return -EINVAL; - -- /* Get the suitable frequency by using index of parent device. */ - if (i < devfreq->profile->max_state) { - child_freq = devfreq->profile->freq_table[i]; - } else { -@@ -167,7 +117,7 @@ no_required_opp: - child_freq = devfreq->profile->freq_table[count - 1]; - } - -- /* Return the suitable frequency for passive device. */ -+out: - *freq = child_freq; - - return 0; diff --git a/target/linux/ipq806x/patches-6.1/111-v5.19-04-PM-devfreq-passive-Keep-cpufreq_policy-for-possible-.patch b/target/linux/ipq806x/patches-6.1/111-v5.19-04-PM-devfreq-passive-Keep-cpufreq_policy-for-possible-.patch deleted file mode 100644 index 9ef02d0ea3..0000000000 --- a/target/linux/ipq806x/patches-6.1/111-v5.19-04-PM-devfreq-passive-Keep-cpufreq_policy-for-possible-.patch +++ /dev/null @@ -1,232 +0,0 @@ -From 26984d9d581e5049bd75091d2e789b9cc3ea12e0 Mon Sep 17 00:00:00 2001 -From: Chanwoo Choi -Date: Wed, 27 Apr 2022 03:49:19 +0900 -Subject: [PATCH 4/5] PM / devfreq: passive: Keep cpufreq_policy for possible - cpus - -The passive governor requires the cpu data to get the next target frequency -of devfreq device if depending on cpu. In order to reduce the unnecessary -memory data, keep cpufreq_policy data for possible cpus instead of NR_CPU. - -Tested-by: Chen-Yu Tsai -Tested-by: Johnson Wang -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/governor.h | 3 ++ - drivers/devfreq/governor_passive.c | 75 +++++++++++++++++++++++------- - include/linux/devfreq.h | 4 +- - 3 files changed, 64 insertions(+), 18 deletions(-) - ---- a/drivers/devfreq/governor.h -+++ b/drivers/devfreq/governor.h -@@ -49,6 +49,7 @@ - - /** - * struct devfreq_cpu_data - Hold the per-cpu data -+ * @node: list node - * @dev: reference to cpu device. - * @first_cpu: the cpumask of the first cpu of a policy. - * @opp_table: reference to cpu opp table. -@@ -60,6 +61,8 @@ - * This is auto-populated by the governor. - */ - struct devfreq_cpu_data { -+ struct list_head node; -+ - struct device *dev; - unsigned int first_cpu; - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -1,4 +1,4 @@ --// SPDX-License-Identifier: GPL-2.0-only -+ // SPDX-License-Identifier: GPL-2.0-only - /* - * linux/drivers/devfreq/governor_passive.c - * -@@ -18,6 +18,22 @@ - - #define HZ_PER_KHZ 1000 - -+static struct devfreq_cpu_data * -+get_parent_cpu_data(struct devfreq_passive_data *p_data, -+ struct cpufreq_policy *policy) -+{ -+ struct devfreq_cpu_data *parent_cpu_data; -+ -+ if (!p_data || !policy) -+ return NULL; -+ -+ list_for_each_entry(parent_cpu_data, &p_data->cpu_data_list, node) -+ if (parent_cpu_data->first_cpu == cpumask_first(policy->related_cpus)) -+ return parent_cpu_data; -+ -+ return NULL; -+} -+ - static unsigned long get_target_freq_by_required_opp(struct device *p_dev, - struct opp_table *p_opp_table, - struct opp_table *opp_table, -@@ -51,14 +67,24 @@ static int get_target_freq_with_cpufreq( - struct devfreq_passive_data *p_data = - (struct devfreq_passive_data *)devfreq->data; - struct devfreq_cpu_data *parent_cpu_data; -+ struct cpufreq_policy *policy; - unsigned long cpu, cpu_cur, cpu_min, cpu_max, cpu_percent; - unsigned long dev_min, dev_max; - unsigned long freq = 0; -+ int ret = 0; - - for_each_online_cpu(cpu) { -- parent_cpu_data = p_data->parent_cpu_data[cpu]; -- if (!parent_cpu_data || parent_cpu_data->first_cpu != cpu) -+ policy = cpufreq_cpu_get(cpu); -+ if (!policy) { -+ ret = -EINVAL; -+ continue; -+ } -+ -+ parent_cpu_data = get_parent_cpu_data(p_data, policy); -+ if (!parent_cpu_data) { -+ cpufreq_cpu_put(policy); - continue; -+ } - - /* Get target freq via required opps */ - cpu_cur = parent_cpu_data->cur_freq * HZ_PER_KHZ; -@@ -67,6 +93,7 @@ static int get_target_freq_with_cpufreq( - devfreq->opp_table, &cpu_cur); - if (freq) { - *target_freq = max(freq, *target_freq); -+ cpufreq_cpu_put(policy); - continue; - } - -@@ -81,9 +108,10 @@ static int get_target_freq_with_cpufreq( - freq = dev_min + mult_frac(dev_max - dev_min, cpu_percent, 100); - - *target_freq = max(freq, *target_freq); -+ cpufreq_cpu_put(policy); - } - -- return 0; -+ return ret; - } - - static int get_target_freq_with_devfreq(struct devfreq *devfreq, -@@ -168,12 +196,11 @@ static int cpufreq_passive_notifier_call - unsigned int cur_freq; - int ret; - -- if (event != CPUFREQ_POSTCHANGE || !freqs || -- !p_data->parent_cpu_data[freqs->policy->cpu]) -+ if (event != CPUFREQ_POSTCHANGE || !freqs) - return 0; - -- parent_cpu_data = p_data->parent_cpu_data[freqs->policy->cpu]; -- if (parent_cpu_data->cur_freq == freqs->new) -+ parent_cpu_data = get_parent_cpu_data(p_data, freqs->policy); -+ if (!parent_cpu_data || parent_cpu_data->cur_freq == freqs->new) - return 0; - - cur_freq = parent_cpu_data->cur_freq; -@@ -196,7 +223,7 @@ static int cpufreq_passive_unregister_no - struct devfreq_passive_data *p_data - = (struct devfreq_passive_data *)devfreq->data; - struct devfreq_cpu_data *parent_cpu_data; -- int cpu, ret; -+ int cpu, ret = 0; - - if (p_data->nb.notifier_call) { - ret = cpufreq_unregister_notifier(&p_data->nb, -@@ -206,16 +233,26 @@ static int cpufreq_passive_unregister_no - } - - for_each_possible_cpu(cpu) { -- parent_cpu_data = p_data->parent_cpu_data[cpu]; -- if (!parent_cpu_data) -+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); -+ if (!policy) { -+ ret = -EINVAL; -+ continue; -+ } -+ -+ parent_cpu_data = get_parent_cpu_data(p_data, policy); -+ if (!parent_cpu_data) { -+ cpufreq_cpu_put(policy); - continue; -+ } - -+ list_del(&parent_cpu_data->node); - if (parent_cpu_data->opp_table) - dev_pm_opp_put_opp_table(parent_cpu_data->opp_table); - kfree(parent_cpu_data); -+ cpufreq_cpu_put(policy); - } - -- return 0; -+ return ret; - } - - static int cpufreq_passive_register_notifier(struct devfreq *devfreq) -@@ -230,6 +267,9 @@ static int cpufreq_passive_register_noti - unsigned int cpu; - int ret; - -+ p_data->cpu_data_list -+ = (struct list_head)LIST_HEAD_INIT(p_data->cpu_data_list); -+ - p_data->nb.notifier_call = cpufreq_passive_notifier_call; - ret = cpufreq_register_notifier(&p_data->nb, CPUFREQ_TRANSITION_NOTIFIER); - if (ret) { -@@ -239,15 +279,18 @@ static int cpufreq_passive_register_noti - } - - for_each_possible_cpu(cpu) { -- if (p_data->parent_cpu_data[cpu]) -- continue; -- - policy = cpufreq_cpu_get(cpu); - if (!policy) { - ret = -EPROBE_DEFER; - goto err; - } - -+ parent_cpu_data = get_parent_cpu_data(p_data, policy); -+ if (parent_cpu_data) { -+ cpufreq_cpu_put(policy); -+ continue; -+ } -+ - parent_cpu_data = kzalloc(sizeof(*parent_cpu_data), - GFP_KERNEL); - if (!parent_cpu_data) { -@@ -276,7 +319,7 @@ static int cpufreq_passive_register_noti - parent_cpu_data->min_freq = policy->cpuinfo.min_freq; - parent_cpu_data->max_freq = policy->cpuinfo.max_freq; - -- p_data->parent_cpu_data[cpu] = parent_cpu_data; -+ list_add_tail(&parent_cpu_data->node, &p_data->cpu_data_list); - cpufreq_cpu_put(policy); - } - ---- a/include/linux/devfreq.h -+++ b/include/linux/devfreq.h -@@ -310,7 +310,7 @@ enum devfreq_parent_dev_type { - * @this: the devfreq instance of own device. - * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER or - * CPUFREQ_TRANSITION_NOTIFIER list. -- * @parent_cpu_data: the state min/max/current frequency of all online cpu's. -+ * @cpu_data_list: the list of cpu frequency data for all cpufreq_policy. - * - * The devfreq_passive_data have to set the devfreq instance of parent - * device with governors except for the passive governor. But, don't need to -@@ -330,7 +330,7 @@ struct devfreq_passive_data { - /* For passive governor's internal use. Don't need to set them */ - struct devfreq *this; - struct notifier_block nb; -- struct devfreq_cpu_data *parent_cpu_data[NR_CPUS]; -+ struct list_head cpu_data_list; - }; - #endif - diff --git a/target/linux/ipq806x/patches-6.1/111-v5.19-05-PM-devfreq-passive-Return-non-error-when-not-support.patch b/target/linux/ipq806x/patches-6.1/111-v5.19-05-PM-devfreq-passive-Return-non-error-when-not-support.patch deleted file mode 100644 index 69160fd77a..0000000000 --- a/target/linux/ipq806x/patches-6.1/111-v5.19-05-PM-devfreq-passive-Return-non-error-when-not-support.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 42d2607d91c4ec37ea1970899c2d614824f3014b Mon Sep 17 00:00:00 2001 -From: Chanwoo Choi -Date: Thu, 19 May 2022 10:07:53 +0900 -Subject: [PATCH 5/5] PM / devfreq: passive: Return non-error when - not-supported event is required - -Each devfreq governor specifies the supported governor event -such as GOV_START and GOV_STOP. When not-supported event is required, -just return non-error. But, commit ce9a0d88d97a ("PM / devfreq: Add -cpu based scaling support to passive governor") returned the error -value. So that return non-error value when not-supported event is required. - -Fixes: ce9a0d88d97a ("PM / devfreq: Add cpu based scaling support to passive governor") -Reported-by: Marek Szyprowski -Signed-off-by: Chanwoo Choi -Signed-off-by: Rafael J. Wysocki ---- - drivers/devfreq/governor_passive.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -402,7 +402,7 @@ static int devfreq_passive_event_handler - { - struct devfreq_passive_data *p_data - = (struct devfreq_passive_data *)devfreq->data; -- int ret = -EINVAL; -+ int ret = 0; - - if (!p_data) - return -EINVAL; diff --git a/target/linux/ipq806x/patches-6.1/112-v5.19-PM-devfreq-Fix-kernel-warning-with-cpufreq-passive-r.patch b/target/linux/ipq806x/patches-6.1/112-v5.19-PM-devfreq-Fix-kernel-warning-with-cpufreq-passive-r.patch deleted file mode 100644 index 3d2bb2de05..0000000000 --- a/target/linux/ipq806x/patches-6.1/112-v5.19-PM-devfreq-Fix-kernel-warning-with-cpufreq-passive-r.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 82c66d2bbbeda9e493487e7413769087a0b46250 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Mon, 20 Jun 2022 00:29:39 +0200 -Subject: [PATCH 1/1] PM / devfreq: Fix kernel warning with cpufreq passive - register fail - -Remove cpufreq_passive_unregister_notifier from -cpufreq_passive_register_notifier in case of error as devfreq core -already call unregister on GOV_START fail. - -This fix the kernel always printing a WARN on governor PROBE_DEFER as -cpufreq_passive_unregister_notifier is called two times and return -error on the second call as the cpufreq is already unregistered. - -Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") -Signed-off-by: Christian Marangi -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/governor_passive.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -336,7 +336,6 @@ err_free_cpu_data: - err_put_policy: - cpufreq_cpu_put(policy); - err: -- WARN_ON(cpufreq_passive_unregister_notifier(devfreq)); - - return ret; - } diff --git a/target/linux/ipq806x/patches-6.1/113-v5.19-01-PM-devfreq-Fix-cpufreq-passive-unregister-errorin.patch b/target/linux/ipq806x/patches-6.1/113-v5.19-01-PM-devfreq-Fix-cpufreq-passive-unregister-errorin.patch deleted file mode 100644 index 0883424548..0000000000 --- a/target/linux/ipq806x/patches-6.1/113-v5.19-01-PM-devfreq-Fix-cpufreq-passive-unregister-errorin.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 8953603eb5447be52f6fc3d8fcae1b3ce9899189 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Mon, 6 Jun 2022 11:58:49 +0200 -Subject: [PATCH v4 1/4] PM / devfreq: Fix cpufreq passive unregister erroring - on PROBE_DEFER - -With the passive governor, the cpu based scaling can PROBE_DEFER due to -the fact that CPU policy are not ready. -The cpufreq passive unregister notifier is called both from the -GOV_START errors and for the GOV_STOP and assume the notifier is -successfully registred every time. With GOV_START failing it's wrong to -loop over each possible CPU since the register path has failed for -some CPU policy not ready. Change the logic and unregister the notifer -based on the current allocated parent_cpu_data list to correctly handle -errors and the governor unregister path. - -Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") -Signed-off-by: Christian 'Ansuel' Marangi ---- - drivers/devfreq/governor_passive.c | 39 +++++++++++++----------------- - 1 file changed, 17 insertions(+), 22 deletions(-) - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -34,6 +34,20 @@ get_parent_cpu_data(struct devfreq_passi - return NULL; - } - -+static void delete_parent_cpu_data(struct devfreq_passive_data *p_data) -+{ -+ struct devfreq_cpu_data *parent_cpu_data, *tmp; -+ -+ list_for_each_entry_safe(parent_cpu_data, tmp, &p_data->cpu_data_list, node) { -+ list_del(&parent_cpu_data->node); -+ -+ if (parent_cpu_data->opp_table) -+ dev_pm_opp_put_opp_table(parent_cpu_data->opp_table); -+ -+ kfree(parent_cpu_data); -+ } -+} -+ - static unsigned long get_target_freq_by_required_opp(struct device *p_dev, - struct opp_table *p_opp_table, - struct opp_table *opp_table, -@@ -222,8 +236,7 @@ static int cpufreq_passive_unregister_no - { - struct devfreq_passive_data *p_data - = (struct devfreq_passive_data *)devfreq->data; -- struct devfreq_cpu_data *parent_cpu_data; -- int cpu, ret = 0; -+ int ret; - - if (p_data->nb.notifier_call) { - ret = cpufreq_unregister_notifier(&p_data->nb, -@@ -232,27 +245,9 @@ static int cpufreq_passive_unregister_no - return ret; - } - -- for_each_possible_cpu(cpu) { -- struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); -- if (!policy) { -- ret = -EINVAL; -- continue; -- } -- -- parent_cpu_data = get_parent_cpu_data(p_data, policy); -- if (!parent_cpu_data) { -- cpufreq_cpu_put(policy); -- continue; -- } -- -- list_del(&parent_cpu_data->node); -- if (parent_cpu_data->opp_table) -- dev_pm_opp_put_opp_table(parent_cpu_data->opp_table); -- kfree(parent_cpu_data); -- cpufreq_cpu_put(policy); -- } -+ delete_parent_cpu_data(p_data); - -- return ret; -+ return 0; - } - - static int cpufreq_passive_register_notifier(struct devfreq *devfreq) diff --git a/target/linux/ipq806x/patches-6.1/113-v5.19-02-PM-devfreq-Fix-kernel-panic-with-cpu-based-scaling-t.patch b/target/linux/ipq806x/patches-6.1/113-v5.19-02-PM-devfreq-Fix-kernel-panic-with-cpu-based-scaling-t.patch deleted file mode 100644 index 867ea83e0c..0000000000 --- a/target/linux/ipq806x/patches-6.1/113-v5.19-02-PM-devfreq-Fix-kernel-panic-with-cpu-based-scaling-t.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 57e00b40033a376de3f3cf0bb9bf7590d2dd679d Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Tue, 14 Jun 2022 13:06:59 +0200 -Subject: [PATCH 1/1] PM / devfreq: Fix kernel panic with cpu based scaling to - passive gov - -The cpufreq passive register notifier can PROBE_DEFER and the devfreq -struct is freed and then reallocaed on probe retry. -The current logic assume that the code can't PROBE_DEFER so the devfreq -struct in the this variable in devfreq_passive_data is assumed to be -(if already set) always correct. -This cause kernel panic as the code try to access the wrong address. -To correctly handle this, update the this variable in -devfreq_passive_data to the devfreq reallocated struct. - -Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") -Signed-off-by: Christian 'Ansuel' Marangi -Signed-off-by: Chanwoo Choi ---- - drivers/devfreq/governor_passive.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -401,8 +401,7 @@ static int devfreq_passive_event_handler - if (!p_data) - return -EINVAL; - -- if (!p_data->this) -- p_data->this = devfreq; -+ p_data->this = devfreq; - - switch (event) { - case DEVFREQ_GOV_START: diff --git a/target/linux/ipq806x/patches-6.1/113-v5.19-03-PM-devfreq-Rework-freq_table-to-be-local-to-devfr.patch b/target/linux/ipq806x/patches-6.1/113-v5.19-03-PM-devfreq-Rework-freq_table-to-be-local-to-devfr.patch deleted file mode 100644 index 210f57bd7e..0000000000 --- a/target/linux/ipq806x/patches-6.1/113-v5.19-03-PM-devfreq-Rework-freq_table-to-be-local-to-devfr.patch +++ /dev/null @@ -1,269 +0,0 @@ -From 46d05776a1a5dd8eb479e868f5ff4f4b97d68238 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Mon, 6 Jun 2022 12:39:19 +0200 -Subject: [PATCH v4 3/4] PM / devfreq: Rework freq_table to be local to devfreq - struct - -Currently we reference the freq_table to the profile defined one and we -make changes on it. Devfreq never supported PROBE_DEFER before the cpu -based scaling support to the passive governor and assumed that a devfreq -device could only had error and be done with it. -Now that a device can PROBE_DEFER a rework to the freq_table logic is -required. - -If a device PROBE_DEFER on the GOV_START, the freq_table is already set -in the device profile struct and its init is skipped. This is due to the -fact that it's common for devs to declare this kind of struct static. -This cause the devfreq logic to find a freq table declared (freq_table -not NULL) with random data and poiting to the old addrs freed by devm. - -This problem CAN be solved by devs by clearing the freq_table in their -profile struct on driver exit path but it should not be trusted and it -looks to use a flawed logic. - -A better solution is to move the freq_table and max_state to the -devfreq struct and never change the profile struct. -This permit to correctly handle PROBE_DEFER since the devfreq struct is -reallocated and contains new values. -Also the profile struct should only be used to init the driver and should -not be used by the devfreq to write the freq_table if it's not provided -by the driver. - -Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") -Signed-off-by: Christian 'Ansuel' Marangi ---- - drivers/devfreq/devfreq.c | 71 ++++++++++++++---------------- - drivers/devfreq/governor_passive.c | 14 +++--- - include/linux/devfreq.h | 4 ++ - 3 files changed, 45 insertions(+), 44 deletions(-) - ---- a/drivers/devfreq/devfreq.c -+++ b/drivers/devfreq/devfreq.c -@@ -123,7 +123,7 @@ void devfreq_get_freq_range(struct devfr - unsigned long *min_freq, - unsigned long *max_freq) - { -- unsigned long *freq_table = devfreq->profile->freq_table; -+ unsigned long *freq_table = devfreq->freq_table; - s32 qos_min_freq, qos_max_freq; - - lockdep_assert_held(&devfreq->lock); -@@ -133,11 +133,11 @@ void devfreq_get_freq_range(struct devfr - * The devfreq drivers can initialize this in either ascending or - * descending order and devfreq core supports both. - */ -- if (freq_table[0] < freq_table[devfreq->profile->max_state - 1]) { -+ if (freq_table[0] < freq_table[devfreq->max_state - 1]) { - *min_freq = freq_table[0]; -- *max_freq = freq_table[devfreq->profile->max_state - 1]; -+ *max_freq = freq_table[devfreq->max_state - 1]; - } else { -- *min_freq = freq_table[devfreq->profile->max_state - 1]; -+ *min_freq = freq_table[devfreq->max_state - 1]; - *max_freq = freq_table[0]; - } - -@@ -169,8 +169,8 @@ static int devfreq_get_freq_level(struct - { - int lev; - -- for (lev = 0; lev < devfreq->profile->max_state; lev++) -- if (freq == devfreq->profile->freq_table[lev]) -+ for (lev = 0; lev < devfreq->max_state; lev++) -+ if (freq == devfreq->freq_table[lev]) - return lev; - - return -EINVAL; -@@ -178,7 +178,6 @@ static int devfreq_get_freq_level(struct - - static int set_freq_table(struct devfreq *devfreq) - { -- struct devfreq_dev_profile *profile = devfreq->profile; - struct dev_pm_opp *opp; - unsigned long freq; - int i, count; -@@ -188,25 +187,22 @@ static int set_freq_table(struct devfreq - if (count <= 0) - return -EINVAL; - -- profile->max_state = count; -- profile->freq_table = devm_kcalloc(devfreq->dev.parent, -- profile->max_state, -- sizeof(*profile->freq_table), -- GFP_KERNEL); -- if (!profile->freq_table) { -- profile->max_state = 0; -+ devfreq->max_state = count; -+ devfreq->freq_table = devm_kcalloc(devfreq->dev.parent, -+ devfreq->max_state, -+ sizeof(*devfreq->freq_table), -+ GFP_KERNEL); -+ if (!devfreq->freq_table) - return -ENOMEM; -- } - -- for (i = 0, freq = 0; i < profile->max_state; i++, freq++) { -+ for (i = 0, freq = 0; i < devfreq->max_state; i++, freq++) { - opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &freq); - if (IS_ERR(opp)) { -- devm_kfree(devfreq->dev.parent, profile->freq_table); -- profile->max_state = 0; -+ devm_kfree(devfreq->dev.parent, devfreq->freq_table); - return PTR_ERR(opp); - } - dev_pm_opp_put(opp); -- profile->freq_table[i] = freq; -+ devfreq->freq_table[i] = freq; - } - - return 0; -@@ -246,7 +242,7 @@ int devfreq_update_status(struct devfreq - - if (lev != prev_lev) { - devfreq->stats.trans_table[ -- (prev_lev * devfreq->profile->max_state) + lev]++; -+ (prev_lev * devfreq->max_state) + lev]++; - devfreq->stats.total_trans++; - } - -@@ -834,6 +830,9 @@ struct devfreq *devfreq_add_device(struc - if (err < 0) - goto err_dev; - mutex_lock(&devfreq->lock); -+ } else { -+ devfreq->freq_table = devfreq->profile->freq_table; -+ devfreq->max_state = devfreq->profile->max_state; - } - - devfreq->scaling_min_freq = find_available_min_freq(devfreq); -@@ -869,8 +868,8 @@ struct devfreq *devfreq_add_device(struc - - devfreq->stats.trans_table = devm_kzalloc(&devfreq->dev, - array3_size(sizeof(unsigned int), -- devfreq->profile->max_state, -- devfreq->profile->max_state), -+ devfreq->max_state, -+ devfreq->max_state), - GFP_KERNEL); - if (!devfreq->stats.trans_table) { - mutex_unlock(&devfreq->lock); -@@ -879,7 +878,7 @@ struct devfreq *devfreq_add_device(struc - } - - devfreq->stats.time_in_state = devm_kcalloc(&devfreq->dev, -- devfreq->profile->max_state, -+ devfreq->max_state, - sizeof(*devfreq->stats.time_in_state), - GFP_KERNEL); - if (!devfreq->stats.time_in_state) { -@@ -1637,9 +1636,9 @@ static ssize_t available_frequencies_sho - - mutex_lock(&df->lock); - -- for (i = 0; i < df->profile->max_state; i++) -+ for (i = 0; i < df->max_state; i++) - count += scnprintf(&buf[count], (PAGE_SIZE - count - 2), -- "%lu ", df->profile->freq_table[i]); -+ "%lu ", df->freq_table[i]); - - mutex_unlock(&df->lock); - /* Truncate the trailing space */ -@@ -1662,7 +1661,7 @@ static ssize_t trans_stat_show(struct de - - if (!df->profile) - return -EINVAL; -- max_state = df->profile->max_state; -+ max_state = df->max_state; - - if (max_state == 0) - return sprintf(buf, "Not Supported.\n"); -@@ -1679,19 +1678,17 @@ static ssize_t trans_stat_show(struct de - len += sprintf(buf + len, " :"); - for (i = 0; i < max_state; i++) - len += sprintf(buf + len, "%10lu", -- df->profile->freq_table[i]); -+ df->freq_table[i]); - - len += sprintf(buf + len, " time(ms)\n"); - - for (i = 0; i < max_state; i++) { -- if (df->profile->freq_table[i] -- == df->previous_freq) { -+ if (df->freq_table[i] == df->previous_freq) - len += sprintf(buf + len, "*"); -- } else { -+ else - len += sprintf(buf + len, " "); -- } -- len += sprintf(buf + len, "%10lu:", -- df->profile->freq_table[i]); -+ -+ len += sprintf(buf + len, "%10lu:", df->freq_table[i]); - for (j = 0; j < max_state; j++) - len += sprintf(buf + len, "%10u", - df->stats.trans_table[(i * max_state) + j]); -@@ -1715,7 +1712,7 @@ static ssize_t trans_stat_store(struct d - if (!df->profile) - return -EINVAL; - -- if (df->profile->max_state == 0) -+ if (df->max_state == 0) - return count; - - err = kstrtoint(buf, 10, &value); -@@ -1723,11 +1720,11 @@ static ssize_t trans_stat_store(struct d - return -EINVAL; - - mutex_lock(&df->lock); -- memset(df->stats.time_in_state, 0, (df->profile->max_state * -+ memset(df->stats.time_in_state, 0, (df->max_state * - sizeof(*df->stats.time_in_state))); - memset(df->stats.trans_table, 0, array3_size(sizeof(unsigned int), -- df->profile->max_state, -- df->profile->max_state)); -+ df->max_state, -+ df->max_state)); - df->stats.total_trans = 0; - df->stats.last_update = get_jiffies_64(); - mutex_unlock(&df->lock); ---- a/drivers/devfreq/governor_passive.c -+++ b/drivers/devfreq/governor_passive.c -@@ -145,18 +145,18 @@ static int get_target_freq_with_devfreq( - goto out; - - /* Use interpolation if required opps is not available */ -- for (i = 0; i < parent_devfreq->profile->max_state; i++) -- if (parent_devfreq->profile->freq_table[i] == *freq) -+ for (i = 0; i < parent_devfreq->max_state; i++) -+ if (parent_devfreq->freq_table[i] == *freq) - break; - -- if (i == parent_devfreq->profile->max_state) -+ if (i == parent_devfreq->max_state) - return -EINVAL; - -- if (i < devfreq->profile->max_state) { -- child_freq = devfreq->profile->freq_table[i]; -+ if (i < devfreq->max_state) { -+ child_freq = devfreq->freq_table[i]; - } else { -- count = devfreq->profile->max_state; -- child_freq = devfreq->profile->freq_table[count - 1]; -+ count = devfreq->max_state; -+ child_freq = devfreq->freq_table[count - 1]; - } - - out: ---- a/include/linux/devfreq.h -+++ b/include/linux/devfreq.h -@@ -185,6 +185,10 @@ struct devfreq { - struct notifier_block nb; - struct delayed_work work; - -+ /* devfreq local freq_table */ -+ unsigned long *freq_table; -+ unsigned int max_state; -+ - unsigned long previous_freq; - struct devfreq_dev_status last_status; - diff --git a/target/linux/ipq806x/patches-6.1/113-v5.19-04-PM-devfreq-Mute-warning-on-governor-PROBE_DEFER.patch b/target/linux/ipq806x/patches-6.1/113-v5.19-04-PM-devfreq-Mute-warning-on-governor-PROBE_DEFER.patch deleted file mode 100644 index 591340c6f2..0000000000 --- a/target/linux/ipq806x/patches-6.1/113-v5.19-04-PM-devfreq-Mute-warning-on-governor-PROBE_DEFER.patch +++ /dev/null @@ -1,28 +0,0 @@ -From eee9f767c41b03a2744d4b0f0c1a144e4ff41e78 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Mon, 6 Jun 2022 13:01:02 +0200 -Subject: [PATCH v4 4/4] PM / devfreq: Mute warning on governor PROBE_DEFER - -Don't print warning when a governor PROBE_DEFER as it's not a real -GOV_START fail. - -Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") -Signed-off-by: Christian 'Ansuel' Marangi ---- - drivers/devfreq/devfreq.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/devfreq/devfreq.c -+++ b/drivers/devfreq/devfreq.c -@@ -930,8 +930,9 @@ struct devfreq *devfreq_add_device(struc - err = devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_START, - NULL); - if (err) { -- dev_err(dev, "%s: Unable to start governor for the device\n", -- __func__); -+ dev_err_probe(dev, err, -+ "%s: Unable to start governor for the device\n", -+ __func__); - goto err_init; - } - create_sysfs_files(devfreq, devfreq->governor); diff --git a/target/linux/ipq806x/patches-6.1/116-v6.0-01-mtd-nand-raw-qcom_nandc-reorder-qcom_nand_host-struc.patch b/target/linux/ipq806x/patches-6.1/116-v6.0-01-mtd-nand-raw-qcom_nandc-reorder-qcom_nand_host-struc.patch deleted file mode 100644 index c595b10dd7..0000000000 --- a/target/linux/ipq806x/patches-6.1/116-v6.0-01-mtd-nand-raw-qcom_nandc-reorder-qcom_nand_host-struc.patch +++ /dev/null @@ -1,268 +0,0 @@ -From b360514edb4743cbf86fc377699c75e98b1264c7 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 16 Jun 2022 02:18:33 +0200 -Subject: [PATCH 1/2] mtd: nand: raw: qcom_nandc: reorder qcom_nand_host struct - -Reorder structs in nandc driver to save holes. - -Signed-off-by: Christian Marangi -Reviewed-by: Manivannan Sadhasivam -Signed-off-by: Miquel Raynal -Link: https://lore.kernel.org/linux-mtd/20220616001835.24393-2-ansuelsmth@gmail.com ---- - drivers/mtd/nand/raw/qcom_nandc.c | 107 +++++++++++++++++------------- - 1 file changed, 62 insertions(+), 45 deletions(-) - ---- a/drivers/mtd/nand/raw/qcom_nandc.c -+++ b/drivers/mtd/nand/raw/qcom_nandc.c -@@ -237,6 +237,9 @@ nandc_set_reg(chip, reg, \ - * @bam_ce - the array of BAM command elements - * @cmd_sgl - sgl for NAND BAM command pipe - * @data_sgl - sgl for NAND BAM consumer/producer pipe -+ * @last_data_desc - last DMA desc in data channel (tx/rx). -+ * @last_cmd_desc - last DMA desc in command channel. -+ * @txn_done - completion for NAND transfer. - * @bam_ce_pos - the index in bam_ce which is available for next sgl - * @bam_ce_start - the index in bam_ce which marks the start position ce - * for current sgl. It will be used for size calculation -@@ -249,14 +252,14 @@ nandc_set_reg(chip, reg, \ - * @rx_sgl_start - start index in data sgl for rx. - * @wait_second_completion - wait for second DMA desc completion before making - * the NAND transfer completion. -- * @txn_done - completion for NAND transfer. -- * @last_data_desc - last DMA desc in data channel (tx/rx). -- * @last_cmd_desc - last DMA desc in command channel. - */ - struct bam_transaction { - struct bam_cmd_element *bam_ce; - struct scatterlist *cmd_sgl; - struct scatterlist *data_sgl; -+ struct dma_async_tx_descriptor *last_data_desc; -+ struct dma_async_tx_descriptor *last_cmd_desc; -+ struct completion txn_done; - u32 bam_ce_pos; - u32 bam_ce_start; - u32 cmd_sgl_pos; -@@ -266,25 +269,23 @@ struct bam_transaction { - u32 rx_sgl_pos; - u32 rx_sgl_start; - bool wait_second_completion; -- struct completion txn_done; -- struct dma_async_tx_descriptor *last_data_desc; -- struct dma_async_tx_descriptor *last_cmd_desc; - }; - - /* - * This data type corresponds to the nand dma descriptor -+ * @dma_desc - low level DMA engine descriptor - * @list - list for desc_info -- * @dir - DMA transfer direction -+ * - * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by - * ADM - * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM - * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM -- * @dma_desc - low level DMA engine descriptor -+ * @dir - DMA transfer direction - */ - struct desc_info { -+ struct dma_async_tx_descriptor *dma_desc; - struct list_head node; - -- enum dma_data_direction dir; - union { - struct scatterlist adm_sgl; - struct { -@@ -292,7 +293,7 @@ struct desc_info { - int sgl_cnt; - }; - }; -- struct dma_async_tx_descriptor *dma_desc; -+ enum dma_data_direction dir; - }; - - /* -@@ -336,52 +337,64 @@ struct nandc_regs { - /* - * NAND controller data struct - * -- * @controller: base controller structure -- * @host_list: list containing all the chips attached to the -- * controller - * @dev: parent device -+ * - * @base: MMIO base -- * @base_phys: physical base address of controller registers -- * @base_dma: dma base address of controller registers -+ * - * @core_clk: controller clock - * @aon_clk: another controller clock - * -+ * @regs: a contiguous chunk of memory for DMA register -+ * writes. contains the register values to be -+ * written to controller -+ * -+ * @props: properties of current NAND controller, -+ * initialized via DT match data -+ * -+ * @controller: base controller structure -+ * @host_list: list containing all the chips attached to the -+ * controller -+ * - * @chan: dma channel - * @cmd_crci: ADM DMA CRCI for command flow control - * @data_crci: ADM DMA CRCI for data flow control -+ * - * @desc_list: DMA descriptor list (list of desc_infos) - * - * @data_buffer: our local DMA buffer for page read/writes, - * used when we can't use the buffer provided - * by upper layers directly -- * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf -- * functions - * @reg_read_buf: local buffer for reading back registers via DMA -+ * -+ * @base_phys: physical base address of controller registers -+ * @base_dma: dma base address of controller registers - * @reg_read_dma: contains dma address for register read buffer -- * @reg_read_pos: marker for data read in reg_read_buf - * -- * @regs: a contiguous chunk of memory for DMA register -- * writes. contains the register values to be -- * written to controller -- * @cmd1/vld: some fixed controller register values -- * @props: properties of current NAND controller, -- * initialized via DT match data -+ * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf -+ * functions - * @max_cwperpage: maximum QPIC codewords required. calculated - * from all connected NAND devices pagesize -+ * -+ * @reg_read_pos: marker for data read in reg_read_buf -+ * -+ * @cmd1/vld: some fixed controller register values - */ - struct qcom_nand_controller { -- struct nand_controller controller; -- struct list_head host_list; -- - struct device *dev; - - void __iomem *base; -- phys_addr_t base_phys; -- dma_addr_t base_dma; - - struct clk *core_clk; - struct clk *aon_clk; - -+ struct nandc_regs *regs; -+ struct bam_transaction *bam_txn; -+ -+ const struct qcom_nandc_props *props; -+ -+ struct nand_controller controller; -+ struct list_head host_list; -+ - union { - /* will be used only by QPIC for BAM DMA */ - struct { -@@ -399,22 +412,22 @@ struct qcom_nand_controller { - }; - - struct list_head desc_list; -- struct bam_transaction *bam_txn; - - u8 *data_buffer; -+ __le32 *reg_read_buf; -+ -+ phys_addr_t base_phys; -+ dma_addr_t base_dma; -+ dma_addr_t reg_read_dma; -+ - int buf_size; - int buf_count; - int buf_start; - unsigned int max_cwperpage; - -- __le32 *reg_read_buf; -- dma_addr_t reg_read_dma; - int reg_read_pos; - -- struct nandc_regs *regs; -- - u32 cmd1, vld; -- const struct qcom_nandc_props *props; - }; - - /* -@@ -430,19 +443,21 @@ struct qcom_nand_controller { - * and reserved bytes - * @cw_data: the number of bytes within a codeword protected - * by ECC -- * @use_ecc: request the controller to use ECC for the -- * upcoming read/write -- * @bch_enabled: flag to tell whether BCH ECC mode is used - * @ecc_bytes_hw: ECC bytes used by controller hardware for this - * chip -- * @status: value to be returned if NAND_CMD_STATUS command -- * is executed -+ * - * @last_command: keeps track of last command on this chip. used - * for reading correct status - * - * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for - * ecc/non-ecc mode for the current nand flash - * device -+ * -+ * @status: value to be returned if NAND_CMD_STATUS command -+ * is executed -+ * @use_ecc: request the controller to use ECC for the -+ * upcoming read/write -+ * @bch_enabled: flag to tell whether BCH ECC mode is used - */ - struct qcom_nand_host { - struct nand_chip chip; -@@ -451,12 +466,10 @@ struct qcom_nand_host { - int cs; - int cw_size; - int cw_data; -- bool use_ecc; -- bool bch_enabled; - int ecc_bytes_hw; - int spare_bytes; - int bbm_size; -- u8 status; -+ - int last_command; - - u32 cfg0, cfg1; -@@ -465,23 +478,27 @@ struct qcom_nand_host { - u32 ecc_bch_cfg; - u32 clrflashstatus; - u32 clrreadstatus; -+ -+ u8 status; -+ bool use_ecc; -+ bool bch_enabled; - }; - - /* - * This data type corresponds to the NAND controller properties which varies - * among different NAND controllers. - * @ecc_modes - ecc mode for NAND -+ * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset - * @is_bam - whether NAND controller is using BAM - * @is_qpic - whether NAND CTRL is part of qpic IP - * @qpic_v2 - flag to indicate QPIC IP version 2 -- * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset - */ - struct qcom_nandc_props { - u32 ecc_modes; -+ u32 dev_cmd_reg_start; - bool is_bam; - bool is_qpic; - bool qpic_v2; -- u32 dev_cmd_reg_start; - }; - - /* Frees the BAM transaction memory */ diff --git a/target/linux/ipq806x/patches-6.1/116-v6.0-02-mtd-nand-raw-qcom_nandc-add-support-for-unprotected-.patch b/target/linux/ipq806x/patches-6.1/116-v6.0-02-mtd-nand-raw-qcom_nandc-add-support-for-unprotected-.patch deleted file mode 100644 index 2a66195304..0000000000 --- a/target/linux/ipq806x/patches-6.1/116-v6.0-02-mtd-nand-raw-qcom_nandc-add-support-for-unprotected-.patch +++ /dev/null @@ -1,406 +0,0 @@ -From 862bdedd7f4b8aebf00fdb422062e64896e97809 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 16 Jun 2022 02:18:34 +0200 -Subject: [PATCH 2/2] mtd: nand: raw: qcom_nandc: add support for unprotected - spare data pages - -IPQ8064 nand have special pages where a different layout scheme is used. -These special page are used by boot partition and on reading them -lots of warning are reported about wrong ECC data and if written to -results in broken data and not bootable device. - -The layout scheme used by these special page consist in using 512 bytes -as the codeword size (even for the last codeword) while writing to CFG0 -register. This forces the NAND controller to unprotect the 4 bytes of -spare data. - -Since the kernel is unaware of this different layout for these special -page, it does try to protect the spare data too during read/write and -warn about CRC errors. - -Add support for this by permitting the user to declare these special -pages in dts by declaring offset and size of the partition. The driver -internally will convert these value to nand pages. - -On user read/write the page is checked and if it's a boot page the -correct layout is used. - -Signed-off-by: Christian Marangi -Reviewed-by: Manivannan Sadhasivam -Signed-off-by: Miquel Raynal -Link: https://lore.kernel.org/linux-mtd/20220616001835.24393-3-ansuelsmth@gmail.com ---- - drivers/mtd/nand/raw/qcom_nandc.c | 199 +++++++++++++++++++++++++++++- - 1 file changed, 194 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/raw/qcom_nandc.c -+++ b/drivers/mtd/nand/raw/qcom_nandc.c -@@ -79,8 +79,10 @@ - #define DISABLE_STATUS_AFTER_WRITE 4 - #define CW_PER_PAGE 6 - #define UD_SIZE_BYTES 9 -+#define UD_SIZE_BYTES_MASK GENMASK(18, 9) - #define ECC_PARITY_SIZE_BYTES_RS 19 - #define SPARE_SIZE_BYTES 23 -+#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23) - #define NUM_ADDR_CYCLES 27 - #define STATUS_BFR_READ 30 - #define SET_RD_MODE_AFTER_STATUS 31 -@@ -101,6 +103,7 @@ - #define ECC_MODE 4 - #define ECC_PARITY_SIZE_BYTES_BCH 8 - #define ECC_NUM_DATA_BYTES 16 -+#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16) - #define ECC_FORCE_CLK_OPEN 30 - - /* NAND_DEV_CMD1 bits */ -@@ -431,12 +434,31 @@ struct qcom_nand_controller { - }; - - /* -+ * NAND special boot partitions -+ * -+ * @page_offset: offset of the partition where spare data is not protected -+ * by ECC (value in pages) -+ * @page_offset: size of the partition where spare data is not protected -+ * by ECC (value in pages) -+ */ -+struct qcom_nand_boot_partition { -+ u32 page_offset; -+ u32 page_size; -+}; -+ -+/* - * NAND chip structure - * -+ * @boot_partitions: array of boot partitions where offset and size of the -+ * boot partitions are stored -+ * - * @chip: base NAND chip structure - * @node: list node to add itself to host_list in - * qcom_nand_controller - * -+ * @nr_boot_partitions: count of the boot partitions where spare data is not -+ * protected by ECC -+ * - * @cs: chip select value for this chip - * @cw_size: the number of bytes in a single step/codeword - * of a page, consisting of all data, ecc, spare -@@ -455,14 +477,20 @@ struct qcom_nand_controller { - * - * @status: value to be returned if NAND_CMD_STATUS command - * is executed -+ * @codeword_fixup: keep track of the current layout used by -+ * the driver for read/write operation. - * @use_ecc: request the controller to use ECC for the - * upcoming read/write - * @bch_enabled: flag to tell whether BCH ECC mode is used - */ - struct qcom_nand_host { -+ struct qcom_nand_boot_partition *boot_partitions; -+ - struct nand_chip chip; - struct list_head node; - -+ int nr_boot_partitions; -+ - int cs; - int cw_size; - int cw_data; -@@ -480,6 +508,7 @@ struct qcom_nand_host { - u32 clrreadstatus; - - u8 status; -+ bool codeword_fixup; - bool use_ecc; - bool bch_enabled; - }; -@@ -492,6 +521,7 @@ struct qcom_nand_host { - * @is_bam - whether NAND controller is using BAM - * @is_qpic - whether NAND CTRL is part of qpic IP - * @qpic_v2 - flag to indicate QPIC IP version 2 -+ * @use_codeword_fixup - whether NAND has different layout for boot partitions - */ - struct qcom_nandc_props { - u32 ecc_modes; -@@ -499,6 +529,7 @@ struct qcom_nandc_props { - bool is_bam; - bool is_qpic; - bool qpic_v2; -+ bool use_codeword_fixup; - }; - - /* Frees the BAM transaction memory */ -@@ -1708,7 +1739,7 @@ qcom_nandc_read_cw_raw(struct mtd_info * - data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); - oob_size1 = host->bbm_size; - -- if (qcom_nandc_is_last_cw(ecc, cw)) { -+ if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) { - data_size2 = ecc->size - data_size1 - - ((ecc->steps - 1) * 4); - oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + -@@ -1789,7 +1820,7 @@ check_for_erased_page(struct qcom_nand_h - } - - for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { -- if (qcom_nandc_is_last_cw(ecc, cw)) { -+ if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) { - data_size = ecc->size - ((ecc->steps - 1) * 4); - oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; - } else { -@@ -1947,7 +1978,7 @@ static int read_page_ecc(struct qcom_nan - for (i = 0; i < ecc->steps; i++) { - int data_size, oob_size; - -- if (qcom_nandc_is_last_cw(ecc, i)) { -+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { - data_size = ecc->size - ((ecc->steps - 1) << 2); - oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + - host->spare_bytes; -@@ -2044,6 +2075,69 @@ static int copy_last_cw(struct qcom_nand - return ret; - } - -+static bool qcom_nandc_is_boot_partition(struct qcom_nand_host *host, int page) -+{ -+ struct qcom_nand_boot_partition *boot_partition; -+ u32 start, end; -+ int i; -+ -+ /* -+ * Since the frequent access will be to the non-boot partitions like rootfs, -+ * optimize the page check by: -+ * -+ * 1. Checking if the page lies after the last boot partition. -+ * 2. Checking from the boot partition end. -+ */ -+ -+ /* First check the last boot partition */ -+ boot_partition = &host->boot_partitions[host->nr_boot_partitions - 1]; -+ start = boot_partition->page_offset; -+ end = start + boot_partition->page_size; -+ -+ /* Page is after the last boot partition end. This is NOT a boot partition */ -+ if (page > end) -+ return false; -+ -+ /* Actually check if it's a boot partition */ -+ if (page < end && page >= start) -+ return true; -+ -+ /* Check the other boot partitions starting from the second-last partition */ -+ for (i = host->nr_boot_partitions - 2; i >= 0; i--) { -+ boot_partition = &host->boot_partitions[i]; -+ start = boot_partition->page_offset; -+ end = start + boot_partition->page_size; -+ -+ if (page < end && page >= start) -+ return true; -+ } -+ -+ return false; -+} -+ -+static void qcom_nandc_codeword_fixup(struct qcom_nand_host *host, int page) -+{ -+ bool codeword_fixup = qcom_nandc_is_boot_partition(host, page); -+ -+ /* Skip conf write if we are already in the correct mode */ -+ if (codeword_fixup == host->codeword_fixup) -+ return; -+ -+ host->codeword_fixup = codeword_fixup; -+ -+ host->cw_data = codeword_fixup ? 512 : 516; -+ host->spare_bytes = host->cw_size - host->ecc_bytes_hw - -+ host->bbm_size - host->cw_data; -+ -+ host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK); -+ host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES | -+ host->cw_data << UD_SIZE_BYTES; -+ -+ host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK; -+ host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES; -+ host->ecc_buf_cfg = (host->cw_data - 1) << NUM_STEPS; -+} -+ - /* implements ecc->read_page() */ - static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf, - int oob_required, int page) -@@ -2052,6 +2146,9 @@ static int qcom_nandc_read_page(struct n - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - u8 *data_buf, *oob_buf = NULL; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - nand_read_page_op(chip, page, 0, NULL, 0); - data_buf = buf; - oob_buf = oob_required ? chip->oob_poi : NULL; -@@ -2071,6 +2168,9 @@ static int qcom_nandc_read_page_raw(stru - int cw, ret; - u8 *data_buf = buf, *oob_buf = chip->oob_poi; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - for (cw = 0; cw < ecc->steps; cw++) { - ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf, - page, cw); -@@ -2091,6 +2191,9 @@ static int qcom_nandc_read_oob(struct na - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - struct nand_ecc_ctrl *ecc = &chip->ecc; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - clear_read_regs(nandc); - clear_bam_transaction(nandc); - -@@ -2111,6 +2214,9 @@ static int qcom_nandc_write_page(struct - u8 *data_buf, *oob_buf; - int i, ret; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - nand_prog_page_begin_op(chip, page, 0, NULL, 0); - - clear_read_regs(nandc); -@@ -2126,7 +2232,7 @@ static int qcom_nandc_write_page(struct - for (i = 0; i < ecc->steps; i++) { - int data_size, oob_size; - -- if (qcom_nandc_is_last_cw(ecc, i)) { -+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { - data_size = ecc->size - ((ecc->steps - 1) << 2); - oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + - host->spare_bytes; -@@ -2183,6 +2289,9 @@ static int qcom_nandc_write_page_raw(str - u8 *data_buf, *oob_buf; - int i, ret; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - nand_prog_page_begin_op(chip, page, 0, NULL, 0); - clear_read_regs(nandc); - clear_bam_transaction(nandc); -@@ -2201,7 +2310,7 @@ static int qcom_nandc_write_page_raw(str - data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); - oob_size1 = host->bbm_size; - -- if (qcom_nandc_is_last_cw(ecc, i)) { -+ if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) { - data_size2 = ecc->size - data_size1 - - ((ecc->steps - 1) << 2); - oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + -@@ -2261,6 +2370,9 @@ static int qcom_nandc_write_oob(struct n - int data_size, oob_size; - int ret; - -+ if (host->nr_boot_partitions) -+ qcom_nandc_codeword_fixup(host, page); -+ - host->use_ecc = true; - clear_bam_transaction(nandc); - -@@ -2922,6 +3034,74 @@ static int qcom_nandc_setup(struct qcom_ - - static const char * const probes[] = { "cmdlinepart", "ofpart", "qcomsmem", NULL }; - -+static int qcom_nand_host_parse_boot_partitions(struct qcom_nand_controller *nandc, -+ struct qcom_nand_host *host, -+ struct device_node *dn) -+{ -+ struct nand_chip *chip = &host->chip; -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ struct qcom_nand_boot_partition *boot_partition; -+ struct device *dev = nandc->dev; -+ int partitions_count, i, j, ret; -+ -+ if (!of_find_property(dn, "qcom,boot-partitions", NULL)) -+ return 0; -+ -+ partitions_count = of_property_count_u32_elems(dn, "qcom,boot-partitions"); -+ if (partitions_count <= 0) { -+ dev_err(dev, "Error parsing boot partition\n"); -+ return partitions_count ? partitions_count : -EINVAL; -+ } -+ -+ host->nr_boot_partitions = partitions_count / 2; -+ host->boot_partitions = devm_kcalloc(dev, host->nr_boot_partitions, -+ sizeof(*host->boot_partitions), GFP_KERNEL); -+ if (!host->boot_partitions) { -+ host->nr_boot_partitions = 0; -+ return -ENOMEM; -+ } -+ -+ for (i = 0, j = 0; i < host->nr_boot_partitions; i++, j += 2) { -+ boot_partition = &host->boot_partitions[i]; -+ -+ ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j, -+ &boot_partition->page_offset); -+ if (ret) { -+ dev_err(dev, "Error parsing boot partition offset at index %d\n", i); -+ host->nr_boot_partitions = 0; -+ return ret; -+ } -+ -+ if (boot_partition->page_offset % mtd->writesize) { -+ dev_err(dev, "Boot partition offset not multiple of writesize at index %i\n", -+ i); -+ host->nr_boot_partitions = 0; -+ return -EINVAL; -+ } -+ /* Convert offset to nand pages */ -+ boot_partition->page_offset /= mtd->writesize; -+ -+ ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j + 1, -+ &boot_partition->page_size); -+ if (ret) { -+ dev_err(dev, "Error parsing boot partition size at index %d\n", i); -+ host->nr_boot_partitions = 0; -+ return ret; -+ } -+ -+ if (boot_partition->page_size % mtd->writesize) { -+ dev_err(dev, "Boot partition size not multiple of writesize at index %i\n", -+ i); -+ host->nr_boot_partitions = 0; -+ return -EINVAL; -+ } -+ /* Convert size to nand pages */ -+ boot_partition->page_size /= mtd->writesize; -+ } -+ -+ return 0; -+} -+ - static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, - struct qcom_nand_host *host, - struct device_node *dn) -@@ -2979,6 +3159,14 @@ static int qcom_nand_host_init_and_regis - if (ret) - nand_cleanup(chip); - -+ if (nandc->props->use_codeword_fixup) { -+ ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn); -+ if (ret) { -+ nand_cleanup(chip); -+ return ret; -+ } -+ } -+ - return ret; - } - -@@ -3144,6 +3332,7 @@ static int qcom_nandc_remove(struct plat - static const struct qcom_nandc_props ipq806x_nandc_props = { - .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), - .is_bam = false, -+ .use_codeword_fixup = true, - .dev_cmd_reg_start = 0x0, - }; - diff --git a/target/linux/ipq806x/patches-6.1/117-v6.0-01-clk-qcom-clk-hfpll-use-poll_timeout-macro.patch b/target/linux/ipq806x/patches-6.1/117-v6.0-01-clk-qcom-clk-hfpll-use-poll_timeout-macro.patch deleted file mode 100644 index 3008fff9b7..0000000000 --- a/target/linux/ipq806x/patches-6.1/117-v6.0-01-clk-qcom-clk-hfpll-use-poll_timeout-macro.patch +++ /dev/null @@ -1,41 +0,0 @@ -From fcfbfe373d41b4728ffec075f8f91b6572a88c27 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 30 Apr 2022 07:44:56 +0200 -Subject: [PATCH 1/3] clk: qcom: clk-hfpll: use poll_timeout macro - -Use regmap_read_poll_timeout macro instead of do-while structure to tidy -things up. Also set a timeout to prevent any sort of system stall. - -Signed-off-by: Ansuel Smith -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220430054458.31321-2-ansuelsmth@gmail.com ---- - drivers/clk/qcom/clk-hfpll.c | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - ---- a/drivers/clk/qcom/clk-hfpll.c -+++ b/drivers/clk/qcom/clk-hfpll.c -@@ -72,13 +72,16 @@ static void __clk_hfpll_enable(struct cl - regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); - - /* Wait for PLL to lock. */ -- if (hd->status_reg) { -- do { -- regmap_read(regmap, hd->status_reg, &val); -- } while (!(val & BIT(hd->lock_bit))); -- } else { -+ if (hd->status_reg) -+ /* -+ * Busy wait. Should never timeout, we add a timeout to -+ * prevent any sort of stall. -+ */ -+ regmap_read_poll_timeout(regmap, hd->status_reg, val, -+ !(val & BIT(hd->lock_bit)), 0, -+ 100 * USEC_PER_MSEC); -+ else - udelay(60); -- } - - /* Enable PLL output. */ - regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); diff --git a/target/linux/ipq806x/patches-6.1/117-v6.0-03-clk-qcom-clk-krait-add-apq-ipq8064-errata-workaround.patch b/target/linux/ipq806x/patches-6.1/117-v6.0-03-clk-qcom-clk-krait-add-apq-ipq8064-errata-workaround.patch deleted file mode 100644 index 4012e16f9b..0000000000 --- a/target/linux/ipq806x/patches-6.1/117-v6.0-03-clk-qcom-clk-krait-add-apq-ipq8064-errata-workaround.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 898d0d6483a9360f1968e0a900465c1fa152a4a9 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Sat, 30 Apr 2022 07:44:58 +0200 -Subject: [PATCH 3/3] clk: qcom: clk-krait: add apq/ipq8064 errata workaround - -Add apq/ipq8064 errata workaround where the sec_src clock gating needs to -be disabled during switching. krait-cc compatible is not enough to -handle this and limit this workaround to apq/ipq8064. We check machine -compatible to handle this. - -Signed-off-by: Ansuel Smith -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220430054458.31321-4-ansuelsmth@gmail.com ---- - drivers/clk/qcom/clk-krait.c | 16 ++++++++++++++++ - drivers/clk/qcom/clk-krait.h | 1 + - drivers/clk/qcom/krait-cc.c | 8 ++++++++ - 3 files changed, 25 insertions(+) - ---- a/drivers/clk/qcom/clk-krait.c -+++ b/drivers/clk/qcom/clk-krait.c -@@ -18,13 +18,23 @@ - static DEFINE_SPINLOCK(krait_clock_reg_lock); - - #define LPL_SHIFT 8 -+#define SECCLKAGD BIT(4) -+ - static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) - { - unsigned long flags; - u32 regval; - - spin_lock_irqsave(&krait_clock_reg_lock, flags); -+ - regval = krait_get_l2_indirect_reg(mux->offset); -+ -+ /* apq/ipq8064 Errata: disable sec_src clock gating during switch. */ -+ if (mux->disable_sec_src_gating) { -+ regval |= SECCLKAGD; -+ krait_set_l2_indirect_reg(mux->offset, regval); -+ } -+ - regval &= ~(mux->mask << mux->shift); - regval |= (sel & mux->mask) << mux->shift; - if (mux->lpl) { -@@ -33,6 +43,12 @@ static void __krait_mux_set_sel(struct k - } - krait_set_l2_indirect_reg(mux->offset, regval); - -+ /* apq/ipq8064 Errata: re-enabled sec_src clock gating. */ -+ if (mux->disable_sec_src_gating) { -+ regval &= ~SECCLKAGD; -+ krait_set_l2_indirect_reg(mux->offset, regval); -+ } -+ - /* Wait for switch to complete. */ - mb(); - udelay(1); ---- a/drivers/clk/qcom/clk-krait.h -+++ b/drivers/clk/qcom/clk-krait.h -@@ -15,6 +15,7 @@ struct krait_mux_clk { - u8 safe_sel; - u8 old_index; - bool reparent; -+ bool disable_sec_src_gating; - - struct clk_hw hw; - struct notifier_block clk_nb; ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -139,6 +139,14 @@ krait_add_sec_mux(struct device *dev, in - mux->hw.init = &init; - mux->safe_sel = 0; - -+ /* Checking for qcom,krait-cc-v1 or qcom,krait-cc-v2 is not -+ * enough to limit this to apq/ipq8064. Directly check machine -+ * compatible to correctly handle this errata. -+ */ -+ if (of_machine_is_compatible("qcom,ipq8064") || -+ of_machine_is_compatible("qcom,apq8064")) -+ mux->disable_sec_src_gating = true; -+ - init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); - if (!init.name) - return -ENOMEM; diff --git a/target/linux/ipq806x/patches-6.1/118-v6.1-03-clk-introduce-devm_-hw_register_mux_parent_data_tabl.patch b/target/linux/ipq806x/patches-6.1/118-v6.1-03-clk-introduce-devm_-hw_register_mux_parent_data_tabl.patch deleted file mode 100644 index 8567d0802b..0000000000 --- a/target/linux/ipq806x/patches-6.1/118-v6.1-03-clk-introduce-devm_-hw_register_mux_parent_data_tabl.patch +++ /dev/null @@ -1,46 +0,0 @@ -From e4cacac0cae3ce7399b70df3bce92eac03151624 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 12 Apr 2022 16:48:39 +0200 -Subject: [PATCH 3/4] clk: introduce (devm_)hw_register_mux_parent_data_table - API - -Introduce (devm_)hw_register_mux_parent_data_table new API. We have -basic support for clk_register_mux using parent_data but we lack any API -to provide a custom parent_map. Add these 2 new API to correctly handle -these special configuration instead of using the generic -__(devm_)clk_hw_register_mux API. - -Signed-off-by: Christian Marangi ---- - include/linux/clk-provider.h | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/include/linux/clk-provider.h -+++ b/include/linux/clk-provider.h -@@ -955,12 +955,26 @@ struct clk *clk_register_mux_table(struc - __clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, NULL, \ - (parent_data), (flags), (reg), (shift), \ - BIT((width)) - 1, (clk_mux_flags), NULL, (lock)) -+#define clk_hw_register_mux_parent_data_table(dev, name, parent_data, \ -+ num_parents, flags, reg, shift, \ -+ width, clk_mux_flags, table, \ -+ lock) \ -+ __clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, NULL, \ -+ (parent_data), (flags), (reg), (shift), \ -+ BIT((width)) - 1, (clk_mux_flags), table, (lock)) - #define devm_clk_hw_register_mux(dev, name, parent_names, num_parents, flags, reg, \ - shift, width, clk_mux_flags, lock) \ - __devm_clk_hw_register_mux((dev), NULL, (name), (num_parents), \ - (parent_names), NULL, NULL, (flags), (reg), \ - (shift), BIT((width)) - 1, (clk_mux_flags), \ - NULL, (lock)) -+#define devm_clk_hw_register_mux_parent_data_table(dev, name, parent_data, \ -+ num_parents, flags, reg, shift, \ -+ width, clk_mux_flags, table, \ -+ lock) \ -+ __devm_clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, \ -+ NULL, (parent_data), (flags), (reg), (shift), \ -+ BIT((width)) - 1, (clk_mux_flags), table, (lock)) - - int clk_mux_val_to_index(struct clk_hw *hw, u32 *table, unsigned int flags, - unsigned int val); diff --git a/target/linux/ipq806x/patches-6.1/118-v6.1-04-clk-qcom-kpss-xcc-convert-to-parent-data-API.patch b/target/linux/ipq806x/patches-6.1/118-v6.1-04-clk-qcom-kpss-xcc-convert-to-parent-data-API.patch deleted file mode 100644 index 6c5f5ea96b..0000000000 --- a/target/linux/ipq806x/patches-6.1/118-v6.1-04-clk-qcom-kpss-xcc-convert-to-parent-data-API.patch +++ /dev/null @@ -1,70 +0,0 @@ -From d08c79b818767f24c3c9cbba585d8a3ec896c1a1 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 17 Feb 2022 22:43:34 +0100 -Subject: [PATCH 4/4] clk: qcom: kpss-xcc: convert to parent data API - -Convert the driver to parent data API. From the Documentation pll8_vote -and pxo should be declared in the DTS so fw_name can be used instead of -parent_names. Name is still used to save regression on old definition. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/kpss-xcc.c | 26 +++++++++----------------- - 1 file changed, 9 insertions(+), 17 deletions(-) - ---- a/drivers/clk/qcom/kpss-xcc.c -+++ b/drivers/clk/qcom/kpss-xcc.c -@@ -12,9 +12,9 @@ - #include - #include - --static const char *aux_parents[] = { -- "pll8_vote", -- "pxo", -+static const struct clk_parent_data aux_parents[] = { -+ { .name = "pll8_vote", .fw_name = "pll8_vote" }, -+ { .name = "pxo", .fw_name = "pxo" }, - }; - - static unsigned int aux_parent_map[] = { -@@ -32,9 +32,9 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_t - static int kpss_xcc_driver_probe(struct platform_device *pdev) - { - const struct of_device_id *id; -- struct clk *clk; - struct resource *res; - void __iomem *base; -+ struct clk_hw *hw; - const char *name; - - id = of_match_device(kpss_xcc_match_table, &pdev->dev); -@@ -57,24 +57,16 @@ static int kpss_xcc_driver_probe(struct - base += 0x28; - } - -- clk = clk_register_mux_table(&pdev->dev, name, aux_parents, -- ARRAY_SIZE(aux_parents), 0, base, 0, 0x3, -- 0, aux_parent_map, NULL); -+ hw = devm_clk_hw_register_mux_parent_data_table(&pdev->dev, name, aux_parents, -+ ARRAY_SIZE(aux_parents), 0, -+ base, 0, 0x3, -+ 0, aux_parent_map, NULL); - -- platform_set_drvdata(pdev, clk); -- -- return PTR_ERR_OR_ZERO(clk); --} -- --static int kpss_xcc_driver_remove(struct platform_device *pdev) --{ -- clk_unregister_mux(platform_get_drvdata(pdev)); -- return 0; -+ return PTR_ERR_OR_ZERO(hw); - } - - static struct platform_driver kpss_xcc_driver = { - .probe = kpss_xcc_driver_probe, -- .remove = kpss_xcc_driver_remove, - .driver = { - .name = "kpss-xcc", - .of_match_table = kpss_xcc_match_table, diff --git a/target/linux/ipq806x/patches-6.1/119-v6.0-02-ARM-dts-qcom-add-rpmcc-missing-clocks-for-apq-ipq806.patch b/target/linux/ipq806x/patches-6.1/119-v6.0-02-ARM-dts-qcom-add-rpmcc-missing-clocks-for-apq-ipq806.patch deleted file mode 100644 index f853b5d2f2..0000000000 --- a/target/linux/ipq806x/patches-6.1/119-v6.0-02-ARM-dts-qcom-add-rpmcc-missing-clocks-for-apq-ipq806.patch +++ /dev/null @@ -1,61 +0,0 @@ -From aa7fd3bb6017b343585e97a909f9b7d2fe174018 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 00:53:19 +0200 -Subject: [PATCH] ARM: dts: qcom: add rpmcc missing clocks for apq/ipq8064 and - msm8660 - -Add missing rpmcc pxo and cxo clock for apq8064, ipq8064 and -msm8660 dtsi. - -Signed-off-by: Christian Marangi -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220706225321.26215-3-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-apq8064.dtsi | 2 ++ - arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 ++ - arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +++- - 3 files changed, 7 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-apq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi -@@ -862,6 +862,8 @@ - rpmcc: clock-controller { - compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; - #clock-cells = <1>; -+ clocks = <&pxo_board>, <&cxo_board>; -+ clock-names = "pxo", "cxo"; - }; - - regulators { ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1074,6 +1074,8 @@ - rpmcc: clock-controller { - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; - #clock-cells = <1>; -+ clocks = <&pxo_board>; -+ clock-names = "pxo"; - }; - }; - ---- a/arch/arm/boot/dts/qcom-msm8660.dtsi -+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi -@@ -56,7 +56,7 @@ - clock-frequency = <19200000>; - }; - -- pxo_board { -+ pxo_board: pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; -@@ -420,6 +420,8 @@ - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; - #clock-cells = <1>; -+ clocks = <&pxo_board>; -+ clock-names = "pxo"; - }; - - pm8901-regulators { diff --git a/target/linux/ipq806x/patches-6.1/119-v6.0-03-clk-qcom-clk-rpm-convert-to-parent_data-API.patch b/target/linux/ipq806x/patches-6.1/119-v6.0-03-clk-qcom-clk-rpm-convert-to-parent_data-API.patch deleted file mode 100644 index 8481b63670..0000000000 --- a/target/linux/ipq806x/patches-6.1/119-v6.0-03-clk-qcom-clk-rpm-convert-to-parent_data-API.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 129d9cd9c25041f8b8681fd6e8584fa47c385f3b Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 7 Jul 2022 00:53:20 +0200 -Subject: [PATCH] clk: qcom: clk-rpm: convert to parent_data API - -Convert clk-rpm driver to parent_data API. -We keep the old pxo/cxo_board parent naming to keep compatibility with -old DT and we use the new pxo/cxo for new implementation where these -clock are defined in DTS. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220706225321.26215-4-ansuelsmth@gmail.com ---- - drivers/clk/qcom/clk-rpm.c | 24 ++++++++++++++++-------- - 1 file changed, 16 insertions(+), 8 deletions(-) - ---- a/drivers/clk/qcom/clk-rpm.c -+++ b/drivers/clk/qcom/clk-rpm.c -@@ -23,6 +23,14 @@ - #define QCOM_RPM_SCALING_ENABLE_ID 0x2 - #define QCOM_RPM_XO_MODE_ON 0x2 - -+static const struct clk_parent_data gcc_pxo[] = { -+ { .fw_name = "pxo", .name = "pxo_board" }, -+}; -+ -+static const struct clk_parent_data gcc_cxo[] = { -+ { .fw_name = "cxo", .name = "cxo_board" }, -+}; -+ - #define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \ - static struct clk_rpm _platform##_##_active; \ - static struct clk_rpm _platform##_##_name = { \ -@@ -32,8 +40,8 @@ - .hw.init = &(struct clk_init_data){ \ - .ops = &clk_rpm_ops, \ - .name = #_name, \ -- .parent_names = (const char *[]){ "pxo_board" }, \ -- .num_parents = 1, \ -+ .parent_data = gcc_pxo, \ -+ .num_parents = ARRAY_SIZE(gcc_pxo), \ - }, \ - }; \ - static struct clk_rpm _platform##_##_active = { \ -@@ -44,8 +52,8 @@ - .hw.init = &(struct clk_init_data){ \ - .ops = &clk_rpm_ops, \ - .name = #_active, \ -- .parent_names = (const char *[]){ "pxo_board" }, \ -- .num_parents = 1, \ -+ .parent_data = gcc_pxo, \ -+ .num_parents = ARRAY_SIZE(gcc_pxo), \ - }, \ - } - -@@ -56,8 +64,8 @@ - .hw.init = &(struct clk_init_data){ \ - .ops = &clk_rpm_xo_ops, \ - .name = #_name, \ -- .parent_names = (const char *[]){ "cxo_board" }, \ -- .num_parents = 1, \ -+ .parent_data = gcc_cxo, \ -+ .num_parents = ARRAY_SIZE(gcc_cxo), \ - }, \ - } - -@@ -68,8 +76,8 @@ - .hw.init = &(struct clk_init_data){ \ - .ops = &clk_rpm_fixed_ops, \ - .name = #_name, \ -- .parent_names = (const char *[]){ "pxo" }, \ -- .num_parents = 1, \ -+ .parent_data = gcc_pxo, \ -+ .num_parents = ARRAY_SIZE(gcc_pxo), \ - }, \ - } - diff --git a/target/linux/ipq806x/patches-6.1/130-6.1-mtd-rawnand-qcom-handle-ret-from-parse-with-codeword.patch b/target/linux/ipq806x/patches-6.1/130-6.1-mtd-rawnand-qcom-handle-ret-from-parse-with-codeword.patch deleted file mode 100644 index 2e7e6833bb..0000000000 --- a/target/linux/ipq806x/patches-6.1/130-6.1-mtd-rawnand-qcom-handle-ret-from-parse-with-codeword.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 7df140e84a75c89962feef659d686303d3ce75e5 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 21 Oct 2022 18:53:04 +0200 -Subject: [PATCH] mtd: rawnand: qcom: handle ret from parse with codeword_fixup - -With use_codeword_fixup enabled, any return from -mtd_device_parse_register gets overwritten. Aside from the clear bug, this -is also problematic as a parser can EPROBE_DEFER and because this is not -correctly handled, the nand is never rescanned later in the bootup -process. - -An example of this problem is when smem requires additional time to be -probed and nandc use qcomsmempart as parser. Parser will return -EPROBE_DEFER but in the current code this ret gets overwritten by -qcom_nand_host_parse_boot_partitions and qcom_nand_host_init_and_register -return 0. - -Correctly handle the return code from mtd_device_parse_register so that -any error from this function is not ignored. - -Fixes: 862bdedd7f4b ("mtd: nand: raw: qcom_nandc: add support for unprotected spare data pages") -Cc: stable@vger.kernel.org # v6.0+ -Signed-off-by: Christian Marangi -Signed-off-by: Miquel Raynal -Link: https://lore.kernel.org/linux-mtd/20221021165304.19991-1-ansuelsmth@gmail.com ---- - drivers/mtd/nand/raw/qcom_nandc.c | 12 +++++++----- - 1 file changed, 7 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/raw/qcom_nandc.c -+++ b/drivers/mtd/nand/raw/qcom_nandc.c -@@ -3157,16 +3157,18 @@ static int qcom_nand_host_init_and_regis - - ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0); - if (ret) -- nand_cleanup(chip); -+ goto err; - - if (nandc->props->use_codeword_fixup) { - ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn); -- if (ret) { -- nand_cleanup(chip); -- return ret; -- } -+ if (ret) -+ goto err; - } - -+ return 0; -+ -+err: -+ nand_cleanup(chip); - return ret; - } -