From: Jo-Philipp Wich Date: Tue, 19 Mar 2013 16:49:18 +0000 (+0000) Subject: po: initialize Slovak translation X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cfc979e2856bc7f72ef52d270a8950bdd3584924;p=project%2Fluci.git po: initialize Slovak translation --- diff --git a/po/sk/ahcp.po b/po/sk/ahcp.po new file mode 100644 index 0000000000..26a13cc295 --- /dev/null +++ b/po/sk/ahcp.po @@ -0,0 +1,106 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "AHCP Server" +msgstr "" + +msgid "" +"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 " +"networks designed to be used in place of router discovery and DHCP on " +"networks where it is difficult or impossible to configure a server within " +"every link-layer broadcast domain, for example mobile ad-hoc networks." +msgstr "" + +msgid "Active AHCP Leases" +msgstr "" + +msgid "Address" +msgstr "" + +msgid "Advanced Settings" +msgstr "" + +msgid "Age" +msgstr "" + +msgid "Announced DNS servers" +msgstr "" + +msgid "Announced NTP servers" +msgstr "" + +msgid "Announced prefixes" +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "Forwarder" +msgstr "" + +msgid "General Setup" +msgstr "" + +msgid "IPv4 and IPv6" +msgstr "" + +msgid "IPv4 only" +msgstr "" + +msgid "IPv6 only" +msgstr "" + +msgid "Lease directory" +msgstr "" + +msgid "Lease validity time" +msgstr "" + +msgid "Log file" +msgstr "" + +msgid "Multicast address" +msgstr "" + +msgid "Operation mode" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Protocol family" +msgstr "" + +msgid "Served interfaces" +msgstr "" + +msgid "Server" +msgstr "" + +msgid "Specifies the announced IPv4 and IPv6 NTP servers" +msgstr "" + +msgid "Specifies the announced IPv4 and IPv6 name servers" +msgstr "" + +msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation" +msgstr "" + +msgid "The AHCP Service is not running." +msgstr "" + +msgid "The AHCP Service is running with ID %s." +msgstr "" + +msgid "There are no active leases." +msgstr "" + +msgid "Unique ID file" +msgstr "" diff --git a/po/sk/asterisk.po b/po/sk/asterisk.po new file mode 100644 index 0000000000..e69de29bb2 diff --git a/po/sk/base.po b/po/sk/base.po new file mode 100644 index 0000000000..495ea6e0bc --- /dev/null +++ b/po/sk/base.po @@ -0,0 +1,2736 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "(%d minute window, %d second interval)" +msgstr "" + +msgid "(%s available)" +msgstr "" + +msgid "(empty)" +msgstr "" + +msgid "(no interfaces attached)" +msgstr "" + +msgid "-- Additional Field --" +msgstr "" + +msgid "-- Please choose --" +msgstr "" + +msgid "-- custom --" +msgstr "" + +msgid "1 Minute Load:" +msgstr "" + +msgid "15 Minute Load:" +msgstr "" + +msgid "40MHz 2nd channel above" +msgstr "" + +msgid "40MHz 2nd channel below" +msgstr "" + +msgid "5 Minute Load:" +msgstr "" + +msgid "BSSID" +msgstr "" + +msgid "DNS query port" +msgstr "" + +msgid "DNS server port" +msgstr "" + +msgid "" +"DNS servers will be queried in the " +"order of the resolvfile" +msgstr "" + +msgid "ESSID" +msgstr "" + +msgid "IPv4-Address" +msgstr "" + +msgid "IPv4-Gateway" +msgstr "" + +msgid "IPv4-Netmask" +msgstr "" + +msgid "" +"IPv6-Address or Network " +"(CIDR)" +msgstr "" + +msgid "IPv6-Gateway" +msgstr "" + +msgid "LED Configuration" +msgstr "" + +msgid "LED Name" +msgstr "" + +msgid "MAC-Address" +msgstr "" + +msgid "" +"Max. DHCP leases" +msgstr "" + +msgid "" +"Max. EDNS0 packet size" +msgstr "" + +msgid "Max. concurrent queries" +msgstr "" + +msgid "%s - %s" +msgstr "" + +msgid "APN" +msgstr "" + +msgid "AR Support" +msgstr "" + +msgid "ARP retry threshold" +msgstr "" + +msgid "ATM Bridges" +msgstr "" + +msgid "ATM Virtual Channel Identifier (VCI)" +msgstr "" + +msgid "ATM Virtual Path Identifier (VPI)" +msgstr "" + +msgid "" +"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual " +"Linux network interfaces which can be used in conjunction with DHCP or PPP " +"to dial into the provider network." +msgstr "" + +msgid "ATM device number" +msgstr "" + +msgid "Accept router advertisements" +msgstr "" + +msgid "Access Concentrator" +msgstr "" + +msgid "Access Point" +msgstr "" + +msgid "Action" +msgstr "" + +msgid "Actions" +msgstr "" + +msgid "Activate this network" +msgstr "" + +msgid "Active IPv4-Routes" +msgstr "" + +msgid "Active IPv6-Routes" +msgstr "" + +msgid "Active Connections" +msgstr "" + +msgid "Active DHCP Leases" +msgstr "" + +msgid "Active DHCPv6 Leases" +msgstr "" + +msgid "Ad-Hoc" +msgstr "" + +msgid "Add" +msgstr "" + +msgid "Add local domain suffix to names served from hosts files" +msgstr "" + +msgid "Add new interface..." +msgstr "" + +msgid "Additional Hosts files" +msgstr "" + +msgid "Address" +msgstr "" + +msgid "Address to access local relay bridge" +msgstr "" + +msgid "Administration" +msgstr "" + +msgid "Advanced Settings" +msgstr "" + +msgid "Advertise IPv6 on network" +msgstr "" + +msgid "Advertised network ID" +msgstr "" + +msgid "Alert" +msgstr "" + +msgid "Allow SSH password authentication" +msgstr "" + +msgid "Allow all except listed" +msgstr "" + +msgid "Allow listed only" +msgstr "" + +msgid "Allow localhost" +msgstr "" + +msgid "Allow remote hosts to connect to local SSH forwarded ports" +msgstr "" + +msgid "Allow root logins with password" +msgstr "" + +msgid "Allow the root user to login with password" +msgstr "" + +msgid "" +"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" +msgstr "" + +msgid "Allowed range is 1 to 65535" +msgstr "" + +msgid "" +"Always use 40MHz channels even if the secondary channel overlaps. Using this " +"option does not comply with IEEE 802.11n-2009!" +msgstr "" + +msgid "An additional network will be created if you leave this unchecked." +msgstr "" + +msgid "Antenna 1" +msgstr "" + +msgid "Antenna 2" +msgstr "" + +msgid "Antenna Configuration" +msgstr "" + +msgid "Any zone" +msgstr "" + +msgid "Apply" +msgstr "" + +msgid "Applying changes" +msgstr "" + +msgid "Assign interfaces..." +msgstr "" + +msgid "Associated Stations" +msgstr "" + +msgid "Atheros 802.11%s Wireless Controller" +msgstr "" + +msgid "Authentication" +msgstr "" + +msgid "Authoritative" +msgstr "" + +msgid "Authorization Required" +msgstr "" + +msgid "Auto Refresh" +msgstr "" + +msgid "Available" +msgstr "" + +msgid "Available packages" +msgstr "" + +msgid "Average:" +msgstr "" + +msgid "BSSID" +msgstr "" + +msgid "Back" +msgstr "" + +msgid "Back to Overview" +msgstr "" + +msgid "Back to configuration" +msgstr "" + +msgid "Back to overview" +msgstr "" + +msgid "Back to scan results" +msgstr "" + +msgid "Background Scan" +msgstr "" + +msgid "Backup / Flash Firmware" +msgstr "" + +msgid "Backup / Restore" +msgstr "" + +msgid "Backup file list" +msgstr "" + +msgid "Bad address specified!" +msgstr "" + +msgid "" +"Below is the determined list of files to backup. It consists of changed " +"configuration files marked by opkg, essential base files and the user " +"defined backup patterns." +msgstr "" + +msgid "Bitrate" +msgstr "" + +msgid "Bogus NX Domain Override" +msgstr "" + +msgid "Bridge" +msgstr "" + +msgid "Bridge interfaces" +msgstr "" + +msgid "Bridge unit number" +msgstr "" + +msgid "Bring up on boot" +msgstr "" + +msgid "Broadcom 802.11%s Wireless Controller" +msgstr "" + +msgid "Broadcom BCM%04x 802.11 Wireless Controller" +msgstr "" + +msgid "Buffered" +msgstr "" + +msgid "Buttons" +msgstr "" + +msgid "CPU" +msgstr "" + +msgid "CPU usage (%)" +msgstr "" + +msgid "Cached" +msgstr "" + +msgid "Cancel" +msgstr "" + +msgid "Chain" +msgstr "" + +msgid "Changes" +msgstr "" + +msgid "Changes applied." +msgstr "" + +msgid "Changes the administrator password for accessing the device" +msgstr "" + +msgid "Channel" +msgstr "" + +msgid "Check" +msgstr "" + +msgid "Checksum" +msgstr "" + +msgid "" +"Choose the firewall zone you want to assign to this interface. Select " +"unspecified to remove the interface from the associated zone or " +"fill out the create field to define a new zone and attach the " +"interface to it." +msgstr "" + +msgid "" +"Choose the network(s) you want to attach to this wireless interface or fill " +"out the create field to define a new network." +msgstr "" + +msgid "Cipher" +msgstr "" + +msgid "" +"Click \"Generate archive\" to download a tar archive of the current " +"configuration files. To reset the firmware to its initial state, click " +"\"Perform reset\" (only possible with squashfs images)." +msgstr "" + +msgid "Client" +msgstr "" + +msgid "Client ID to send when requesting DHCP" +msgstr "" + +msgid "" +"Close inactive connection after the given amount of seconds, use 0 to " +"persist connection" +msgstr "" + +msgid "Close list..." +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "Command" +msgstr "" + +msgid "Common Configuration" +msgstr "" + +msgid "Compression" +msgstr "" + +msgid "Configuration" +msgstr "" + +msgid "Configuration applied." +msgstr "" + +msgid "Configuration files will be kept." +msgstr "" + +msgid "Configures this mount as overlay storage for block-extroot" +msgstr "" + +msgid "Confirmation" +msgstr "" + +msgid "Connect" +msgstr "" + +msgid "Connected" +msgstr "" + +msgid "Connection Limit" +msgstr "" + +msgid "Connections" +msgstr "" + +msgid "Country" +msgstr "" + +msgid "Country Code" +msgstr "" + +msgid "Cover the following interface" +msgstr "" + +msgid "Cover the following interfaces" +msgstr "" + +msgid "Create / Assign firewall-zone" +msgstr "" + +msgid "Create Interface" +msgstr "" + +msgid "Create a bridge over multiple interfaces" +msgstr "" + +msgid "Critical" +msgstr "" + +msgid "Cron Log Level" +msgstr "" + +msgid "Custom Interface" +msgstr "" + +msgid "" +"Customizes the behaviour of the device LEDs if possible." +msgstr "" + +msgid "DHCP Leases" +msgstr "" + +msgid "DHCP Server" +msgstr "" + +msgid "DHCP and DNS" +msgstr "" + +msgid "DHCP client" +msgstr "" + +msgid "DHCP-Options" +msgstr "" + +msgid "DHCPv6 Leases" +msgstr "" + +msgid "DNS" +msgstr "" + +msgid "DNS forwardings" +msgstr "" + +msgid "DUID" +msgstr "" + +msgid "Debug" +msgstr "" + +msgid "Default %d" +msgstr "" + +msgid "Default gateway" +msgstr "" + +msgid "Default state" +msgstr "" + +msgid "Define a name for this network." +msgstr "" + +msgid "" +"Define additional DHCP options, for example " +"\"6,192.168.2.1,192.168.2.2\" which advertises different DNS " +"servers to clients." +msgstr "" + +msgid "Delete" +msgstr "" + +msgid "Delete this interface" +msgstr "" + +msgid "Delete this network" +msgstr "" + +msgid "Description" +msgstr "" + +msgid "Design" +msgstr "" + +msgid "Destination" +msgstr "" + +msgid "Device" +msgstr "" + +msgid "Device Configuration" +msgstr "" + +msgid "Diagnostics" +msgstr "" + +msgid "Directory" +msgstr "" + +msgid "Disable" +msgstr "" + +msgid "" +"Disable DHCP for " +"this interface." +msgstr "" + +msgid "Disable DNS setup" +msgstr "" + +msgid "Disable HW-Beacon timer" +msgstr "" + +msgid "Disabled" +msgstr "" + +msgid "Discard upstream RFC1918 responses" +msgstr "" + +msgid "Displaying only packages containing" +msgstr "" + +msgid "Distance Optimization" +msgstr "" + +msgid "Distance to farthest network member in meters." +msgstr "" + +msgid "Diversity" +msgstr "" + +msgid "" +"Dnsmasq is a combined DHCP-Server and DNS-" +"Forwarder for NAT " +"firewalls" +msgstr "" + +msgid "Do not cache negative replies, e.g. for not existing domains" +msgstr "" + +msgid "Do not forward requests that cannot be answered by public name servers" +msgstr "" + +msgid "Do not forward reverse lookups for local networks" +msgstr "" + +msgid "Do not send probe responses" +msgstr "" + +msgid "Domain required" +msgstr "" + +msgid "Domain whitelist" +msgstr "" + +msgid "" +"Don't forward DNS-Requests without " +"DNS-Name" +msgstr "" + +msgid "Download and install package" +msgstr "" + +msgid "Download backup" +msgstr "" + +msgid "Dropbear Instance" +msgstr "" + +msgid "" +"Dropbear offers SSH network shell access " +"and an integrated SCP server" +msgstr "" + +msgid "Dynamic DHCP" +msgstr "" + +msgid "Dynamic tunnel" +msgstr "" + +msgid "" +"Dynamically allocate DHCP addresses for clients. If disabled, only clients " +"having static leases will be served." +msgstr "" + +msgid "EAP-Method" +msgstr "" + +msgid "Edit" +msgstr "" + +msgid "Edit this interface" +msgstr "" + +msgid "Edit this network" +msgstr "" + +msgid "Emergency" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Enable STP" +msgstr "" + +msgid "Enable HE.net dynamic endpoint update" +msgstr "" + +msgid "Enable IPv6 negotiation on the PPP link" +msgstr "" + +msgid "Enable Jumbo Frame passthrough" +msgstr "" + +msgid "Enable NTP client" +msgstr "" + +msgid "Enable TFTP server" +msgstr "" + +msgid "Enable VLAN functionality" +msgstr "" + +msgid "Enable learning and aging" +msgstr "" + +msgid "Enable this mount" +msgstr "" + +msgid "Enable this swap" +msgstr "" + +msgid "Enable/Disable" +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "Enables the Spanning Tree Protocol on this bridge" +msgstr "" + +msgid "Encapsulation mode" +msgstr "" + +msgid "Encryption" +msgstr "" + +msgid "Erasing..." +msgstr "" + +msgid "Error" +msgstr "" + +msgid "Ethernet Adapter" +msgstr "" + +msgid "Ethernet Switch" +msgstr "" + +msgid "Expand hosts" +msgstr "" + +msgid "Expires" +msgstr "" + +msgid "" +"Expiry time of leased addresses, minimum is 2 Minutes (2m)." +msgstr "" + +msgid "External system log server" +msgstr "" + +msgid "External system log server port" +msgstr "" + +msgid "Fast Frames" +msgstr "" + +msgid "File" +msgstr "" + +msgid "Filename of the boot image advertised to clients" +msgstr "" + +msgid "Filesystem" +msgstr "" + +msgid "Filter" +msgstr "" + +msgid "Filter private" +msgstr "" + +msgid "Filter useless" +msgstr "" + +msgid "Find and join network" +msgstr "" + +msgid "Find package" +msgstr "" + +msgid "Finish" +msgstr "" + +msgid "Firewall" +msgstr "" + +msgid "Firewall Settings" +msgstr "" + +msgid "Firewall Status" +msgstr "" + +msgid "Firmware Version" +msgstr "" + +msgid "Fixed source port for outbound DNS queries" +msgstr "" + +msgid "Flags" +msgstr "" + +msgid "Flash Firmware" +msgstr "" + +msgid "Flash image..." +msgstr "" + +msgid "Flash new firmware image" +msgstr "" + +msgid "Flash operations" +msgstr "" + +msgid "Flashing..." +msgstr "" + +msgid "Force" +msgstr "" + +msgid "Force 40MHz mode" +msgstr "" + +msgid "Force CCMP (AES)" +msgstr "" + +msgid "Force DHCP on this network even if another server is detected." +msgstr "" + +msgid "Force TKIP" +msgstr "" + +msgid "Force TKIP and CCMP (AES)" +msgstr "" + +msgid "Forward DHCP traffic" +msgstr "" + +msgid "Forward broadcast traffic" +msgstr "" + +msgid "Forwarding mode" +msgstr "" + +msgid "Fragmentation Threshold" +msgstr "" + +msgid "Frame Bursting" +msgstr "" + +msgid "Free" +msgstr "" + +msgid "Free space" +msgstr "" + +msgid "Frequency Hopping" +msgstr "" + +msgid "GHz" +msgstr "" + +msgid "GPRS only" +msgstr "" + +msgid "Gateway" +msgstr "" + +msgid "Gateway ports" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "General Setup" +msgstr "" + +msgid "Generate archive" +msgstr "" + +msgid "Generic 802.11%s Wireless Controller" +msgstr "" + +msgid "Given password confirmation did not match, password not changed!" +msgstr "" + +msgid "Go to password configuration..." +msgstr "" + +msgid "Go to relevant configuration page" +msgstr "" + +msgid "HE.net password" +msgstr "" + +msgid "HE.net user ID" +msgstr "" + +msgid "HT capabilities" +msgstr "" + +msgid "HT mode" +msgstr "" + +msgid "Handler" +msgstr "" + +msgid "Hang Up" +msgstr "" + +msgid "" +"Here you can configure the basic aspects of your device like its hostname or " +"the timezone." +msgstr "" + +msgid "" +"Here you can paste public SSH-Keys (one per line) for SSH public-key " +"authentication." +msgstr "" + +msgid "Hermes 802.11b Wireless Controller" +msgstr "" + +msgid "Hide ESSID" +msgstr "" + +msgid "Host entries" +msgstr "" + +msgid "Host expiry timeout" +msgstr "" + +msgid "Host-IP or Network" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "Hostname to send when requesting DHCP" +msgstr "" + +msgid "Hostnames" +msgstr "" + +msgid "IP address" +msgstr "" + +msgid "IPv4" +msgstr "" + +msgid "IPv4 Firewall" +msgstr "" + +msgid "IPv4 WAN Status" +msgstr "" + +msgid "IPv4 address" +msgstr "" + +msgid "IPv4 and IPv6" +msgstr "" + +msgid "IPv4 broadcast" +msgstr "" + +msgid "IPv4 gateway" +msgstr "" + +msgid "IPv4 netmask" +msgstr "" + +msgid "IPv4 only" +msgstr "" + +msgid "IPv4 prefix length" +msgstr "" + +msgid "IPv4-Address" +msgstr "" + +msgid "IPv6" +msgstr "" + +msgid "IPv6 Firewall" +msgstr "" + +msgid "IPv6 WAN Status" +msgstr "" + +msgid "IPv6 address" +msgstr "" + +msgid "IPv6 gateway" +msgstr "" + +msgid "IPv6 only" +msgstr "" + +msgid "IPv6 prefix" +msgstr "" + +msgid "IPv6 prefix length" +msgstr "" + +msgid "IPv6-Address" +msgstr "" + +msgid "IPv6-in-IPv4 (RFC4213)" +msgstr "" + +msgid "IPv6-over-IPv4 (6rd)" +msgstr "" + +msgid "IPv6-over-IPv4 (6to4)" +msgstr "" + +msgid "Identity" +msgstr "" + +msgid "" +"If specified, mount the device by its UUID instead of a fixed device node" +msgstr "" + +msgid "" +"If specified, mount the device by the partition label instead of a fixed " +"device node" +msgstr "" + +msgid "If unchecked, no default route is configured" +msgstr "" + +msgid "If unchecked, the advertised DNS server addresses are ignored" +msgstr "" + +msgid "" +"If your physical memory is insufficient unused data can be temporarily " +"swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very " +"slow process as the swap-device cannot be accessed with the high datarates " +"of the RAM." +msgstr "" + +msgid "Ignore Hosts files" +msgstr "" + +msgid "Ignore interface" +msgstr "" + +msgid "Ignore resolve file" +msgstr "" + +msgid "Image" +msgstr "" + +msgid "In" +msgstr "" + +msgid "Inactivity timeout" +msgstr "" + +msgid "Inbound:" +msgstr "" + +msgid "Info" +msgstr "" + +msgid "Initscript" +msgstr "" + +msgid "Initscripts" +msgstr "" + +msgid "Install" +msgstr "" + +msgid "Install package %q" +msgstr "" + +msgid "Install protocol extensions..." +msgstr "" + +msgid "Installed packages" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Interface Configuration" +msgstr "" + +msgid "Interface Overview" +msgstr "" + +msgid "Interface is reconnecting..." +msgstr "" + +msgid "Interface is shutting down..." +msgstr "" + +msgid "Interface not present or not connected yet." +msgstr "" + +msgid "Interface reconnected" +msgstr "" + +msgid "Interface shut down" +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Internal Server Error" +msgstr "" + +msgid "Invalid" +msgstr "" + +msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed." +msgstr "" + +msgid "Invalid VLAN ID given! Only unique IDs are allowed" +msgstr "" + +msgid "Invalid username and/or password! Please try again." +msgstr "" + +msgid "" +"It appears that you try to flash an image that does not fit into the flash " +"memory, please verify the image file!" +msgstr "" + +msgid "Java Script required!" +msgstr "" + +msgid "Join Network" +msgstr "" + +msgid "Join Network: Settings" +msgstr "" + +msgid "Join Network: Wireless Scan" +msgstr "" + +msgid "Keep settings" +msgstr "" + +msgid "Kernel Log" +msgstr "" + +msgid "Kernel Version" +msgstr "" + +msgid "Key" +msgstr "" + +msgid "Key #%d" +msgstr "" + +msgid "Kill" +msgstr "" + +msgid "L2TP" +msgstr "" + +msgid "L2TP Server" +msgstr "" + +msgid "LCP echo failure threshold" +msgstr "" + +msgid "LCP echo interval" +msgstr "" + +msgid "LLC" +msgstr "" + +msgid "Label" +msgstr "" + +msgid "Language" +msgstr "" + +msgid "Language and Style" +msgstr "" + +msgid "Lease validity time" +msgstr "" + +msgid "Leasefile" +msgstr "" + +msgid "Leasetime" +msgstr "" + +msgid "Leasetime remaining" +msgstr "" + +msgid "Leave empty to autodetect" +msgstr "" + +msgid "Leave empty to use the current WAN address" +msgstr "" + +msgid "Legend:" +msgstr "" + +msgid "Limit" +msgstr "" + +msgid "Link On" +msgstr "" + +msgid "" +"List of DNS servers to forward " +"requests to" +msgstr "" + +msgid "List of domains to allow RFC1918 responses for" +msgstr "" + +msgid "List of hosts that supply bogus NX domain results" +msgstr "" + +msgid "Listen only on the given interface or, if unspecified, on all" +msgstr "" + +msgid "Listening port for inbound DNS queries" +msgstr "" + +msgid "Load" +msgstr "" + +msgid "Load Average" +msgstr "" + +msgid "Loading" +msgstr "" + +msgid "Local IPv4 address" +msgstr "" + +msgid "Local IPv6 address" +msgstr "" + +msgid "Local Startup" +msgstr "" + +msgid "Local Time" +msgstr "" + +msgid "Local domain" +msgstr "" + +msgid "" +"Local domain specification. Names matching this domain are never forwared " +"and resolved from DHCP or hosts files only" +msgstr "" + +msgid "Local domain suffix appended to DHCP names and hosts file entries" +msgstr "" + +msgid "Local server" +msgstr "" + +msgid "" +"Localise hostname depending on the requesting subnet if multiple IPs are " +"available" +msgstr "" + +msgid "Localise queries" +msgstr "" + +msgid "Locked to channel %d used by %s" +msgstr "" + +msgid "Log output level" +msgstr "" + +msgid "Log queries" +msgstr "" + +msgid "Logging" +msgstr "" + +msgid "Login" +msgstr "" + +msgid "Logout" +msgstr "" + +msgid "Lowest leased address as offset from the network address." +msgstr "" + +msgid "MAC-Address" +msgstr "" + +msgid "MAC-Address Filter" +msgstr "" + +msgid "MAC-Filter" +msgstr "" + +msgid "MAC-List" +msgstr "" + +msgid "MB/s" +msgstr "" + +msgid "MHz" +msgstr "" + +msgid "MTU" +msgstr "" + +msgid "Maximum Rate" +msgstr "" + +msgid "Maximum allowed number of active DHCP leases" +msgstr "" + +msgid "Maximum allowed number of concurrent DNS queries" +msgstr "" + +msgid "Maximum allowed size of EDNS.0 UDP packets" +msgstr "" + +msgid "Maximum amount of seconds to wait for the modem to become ready" +msgstr "" + +msgid "Maximum hold time" +msgstr "" + +msgid "Maximum number of leased addresses." +msgstr "" + +msgid "Mbit/s" +msgstr "" + +msgid "Memory" +msgstr "" + +msgid "Memory usage (%)" +msgstr "" + +msgid "Metric" +msgstr "" + +msgid "Minimum Rate" +msgstr "" + +msgid "Minimum hold time" +msgstr "" + +msgid "Missing protocol extension for proto %q" +msgstr "" + +msgid "Mode" +msgstr "" + +msgid "Modem device" +msgstr "" + +msgid "Modem init timeout" +msgstr "" + +msgid "Monitor" +msgstr "" + +msgid "Mount Entry" +msgstr "" + +msgid "Mount Point" +msgstr "" + +msgid "Mount Points" +msgstr "" + +msgid "Mount Points - Mount Entry" +msgstr "" + +msgid "Mount Points - Swap Entry" +msgstr "" + +msgid "" +"Mount Points define at which point a memory device will be attached to the " +"filesystem" +msgstr "" + +msgid "Mount options" +msgstr "" + +msgid "Mount point" +msgstr "" + +msgid "Mounted file systems" +msgstr "" + +msgid "Move down" +msgstr "" + +msgid "Move up" +msgstr "" + +msgid "Multicast Rate" +msgstr "" + +msgid "Multicast address" +msgstr "" + +msgid "NAS ID" +msgstr "" + +msgid "NTP server candidates" +msgstr "" + +msgid "Name" +msgstr "" + +msgid "Name of the new interface" +msgstr "" + +msgid "Name of the new network" +msgstr "" + +msgid "Navigation" +msgstr "" + +msgid "Netmask" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "Network Utilities" +msgstr "" + +msgid "Network boot image" +msgstr "" + +msgid "Network without interfaces." +msgstr "" + +msgid "Next »" +msgstr "" + +msgid "No DHCP Server configured for this interface" +msgstr "" + +msgid "No chains in this table" +msgstr "" + +msgid "No files found" +msgstr "" + +msgid "No information available" +msgstr "" + +msgid "No negative cache" +msgstr "" + +msgid "No network configured on this device" +msgstr "" + +msgid "No network name specified" +msgstr "" + +msgid "No package lists available" +msgstr "" + +msgid "No password set!" +msgstr "" + +msgid "No rules in this chain" +msgstr "" + +msgid "No zone assigned" +msgstr "" + +msgid "Noise" +msgstr "" + +msgid "Noise:" +msgstr "" + +msgid "None" +msgstr "" + +msgid "Normal" +msgstr "" + +msgid "Not Found" +msgstr "" + +msgid "Not associated" +msgstr "" + +msgid "Not connected" +msgstr "" + +msgid "Note: Configuration files will be erased." +msgstr "" + +msgid "Notice" +msgstr "" + +msgid "Nslookup" +msgstr "" + +msgid "OK" +msgstr "" + +msgid "OPKG-Configuration" +msgstr "" + +msgid "Off-State Delay" +msgstr "" + +msgid "" +"On this page you can configure the network interfaces. You can bridge " +"several interfaces by ticking the \"bridge interfaces\" field and enter the " +"names of several network interfaces separated by spaces. You can also use " +"VLAN notation " +"INTERFACE.VLANNR (e.g.: " +"eth0.1)." +msgstr "" + +msgid "On-State Delay" +msgstr "" + +msgid "One of hostname or mac address must be specified!" +msgstr "" + +msgid "One or more fields contain invalid values!" +msgstr "" + +msgid "One or more required fields have no value!" +msgstr "" + +msgid "Open list..." +msgstr "" + +msgid "Option changed" +msgstr "" + +msgid "Option removed" +msgstr "" + +msgid "Options" +msgstr "" + +msgid "Other:" +msgstr "" + +msgid "Out" +msgstr "" + +msgid "Outbound:" +msgstr "" + +msgid "Outdoor Channels" +msgstr "" + +msgid "Override MAC address" +msgstr "" + +msgid "Override MTU" +msgstr "" + +msgid "Override the gateway in DHCP responses" +msgstr "" + +msgid "" +"Override the netmask sent to clients. Normally it is calculated from the " +"subnet that is served." +msgstr "" + +msgid "Override the table used for internal routes" +msgstr "" + +msgid "Overview" +msgstr "" + +msgid "Owner" +msgstr "" + +msgid "PAP/CHAP password" +msgstr "" + +msgid "PAP/CHAP username" +msgstr "" + +msgid "PID" +msgstr "" + +msgid "PIN" +msgstr "" + +msgid "PPP" +msgstr "" + +msgid "PPPoA Encapsulation" +msgstr "" + +msgid "PPPoATM" +msgstr "" + +msgid "PPPoE" +msgstr "" + +msgid "PPtP" +msgstr "" + +msgid "Package libiwinfo required!" +msgstr "" + +msgid "Package lists are older than 24 hours" +msgstr "" + +msgid "Package name" +msgstr "" + +msgid "Packets" +msgstr "" + +msgid "Part of zone %q" +msgstr "" + +msgid "Password" +msgstr "" + +msgid "Password authentication" +msgstr "" + +msgid "Password of Private Key" +msgstr "" + +msgid "Password successfully changed!" +msgstr "" + +msgid "Path to CA-Certificate" +msgstr "" + +msgid "Path to Client-Certificate" +msgstr "" + +msgid "Path to Private Key" +msgstr "" + +msgid "Path to executable which handles the button event" +msgstr "" + +msgid "Peak:" +msgstr "" + +msgid "Perform reboot" +msgstr "" + +msgid "Perform reset" +msgstr "" + +msgid "Phy Rate:" +msgstr "" + +msgid "Physical Settings" +msgstr "" + +msgid "Ping" +msgstr "" + +msgid "Pkts." +msgstr "" + +msgid "Please enter your username and password." +msgstr "" + +msgid "Please wait: Device rebooting..." +msgstr "" + +msgid "Policy" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Port %d" +msgstr "" + +msgid "Port %d is untagged in multiple VLANs!" +msgstr "" + +msgid "Port status:" +msgstr "" + +msgid "" +"Presume peer to be dead after given amount of LCP echo failures, use 0 to " +"ignore failures" +msgstr "" + +msgid "Prevents client-to-client communication" +msgstr "" + +msgid "Prism2/2.5/3 802.11b Wireless Controller" +msgstr "" + +msgid "Proceed" +msgstr "" + +msgid "Processes" +msgstr "" + +msgid "Prot." +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "Protocol family" +msgstr "" + +msgid "Protocol of the new interface" +msgstr "" + +msgid "Protocol support is not installed" +msgstr "" + +msgid "Provide NTP server" +msgstr "" + +msgid "Provide new network" +msgstr "" + +msgid "Pseudo Ad-Hoc (ahdemo)" +msgstr "" + +msgid "Quality" +msgstr "" + +msgid "RTS/CTS Threshold" +msgstr "" + +msgid "RX" +msgstr "" + +msgid "RX Rate" +msgstr "" + +msgid "RaLink 802.11%s Wireless Controller" +msgstr "" + +msgid "Radius-Accounting-Port" +msgstr "" + +msgid "Radius-Accounting-Secret" +msgstr "" + +msgid "Radius-Accounting-Server" +msgstr "" + +msgid "Radius-Authentication-Port" +msgstr "" + +msgid "Radius-Authentication-Secret" +msgstr "" + +msgid "Radius-Authentication-Server" +msgstr "" + +msgid "" +"Read /etc/ethers to configure the DHCP-Server" +msgstr "" + +msgid "" +"Really delete this interface? The deletion cannot be undone!\\nYou might " +"lose access to this device if you are connected via this interface." +msgstr "" + +msgid "" +"Really delete this wireless network? The deletion cannot be undone!\\nYou " +"might lose access to this device if you are connected via this network." +msgstr "" + +msgid "Really reset all changes?" +msgstr "" + +msgid "" +"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if " +"you are connected via this interface." +msgstr "" + +msgid "" +"Really shutdown network ?\\nYou might lose access to this device if you are " +"connected via this interface." +msgstr "" + +msgid "Really switch protocol?" +msgstr "" + +msgid "Realtime Connections" +msgstr "" + +msgid "Realtime Graphs" +msgstr "" + +msgid "Realtime Load" +msgstr "" + +msgid "Realtime Traffic" +msgstr "" + +msgid "Realtime Wireless" +msgstr "" + +msgid "Rebind protection" +msgstr "" + +msgid "Reboot" +msgstr "" + +msgid "Rebooting..." +msgstr "" + +msgid "Reboots the operating system of your device" +msgstr "" + +msgid "Receive" +msgstr "" + +msgid "Receiver Antenna" +msgstr "" + +msgid "Reconnect this interface" +msgstr "" + +msgid "Reconnecting interface" +msgstr "" + +msgid "References" +msgstr "" + +msgid "Regulatory Domain" +msgstr "" + +msgid "Relay" +msgstr "" + +msgid "Relay Bridge" +msgstr "" + +msgid "Relay between networks" +msgstr "" + +msgid "Relay bridge" +msgstr "" + +msgid "Remote IPv4 address" +msgstr "" + +msgid "Remove" +msgstr "" + +msgid "Repeat scan" +msgstr "" + +msgid "Replace entry" +msgstr "" + +msgid "Replace wireless configuration" +msgstr "" + +msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3" +msgstr "" + +msgid "Reset" +msgstr "" + +msgid "Reset Counters" +msgstr "" + +msgid "Reset to defaults" +msgstr "" + +msgid "Resolv and Hosts Files" +msgstr "" + +msgid "Resolve file" +msgstr "" + +msgid "Restart" +msgstr "" + +msgid "Restart Firewall" +msgstr "" + +msgid "Restore backup" +msgstr "" + +msgid "Reveal/hide password" +msgstr "" + +msgid "Revert" +msgstr "" + +msgid "Root" +msgstr "" + +msgid "Root directory for files served via TFTP" +msgstr "" + +msgid "Router Model" +msgstr "" + +msgid "Router Name" +msgstr "" + +msgid "Router Password" +msgstr "" + +msgid "Routes" +msgstr "" + +msgid "" +"Routes specify over which interface and gateway a certain host or network " +"can be reached." +msgstr "" + +msgid "Rule #" +msgstr "" + +msgid "Run a filesystem check before mounting the device" +msgstr "" + +msgid "Run filesystem check" +msgstr "" + +msgid "SSH Access" +msgstr "" + +msgid "SSH-Keys" +msgstr "" + +msgid "SSID" +msgstr "" + +msgid "Save" +msgstr "" + +msgid "Save & Apply" +msgstr "" + +msgid "Save & Apply" +msgstr "" + +msgid "Scan" +msgstr "" + +msgid "Scheduled Tasks" +msgstr "" + +msgid "Section added" +msgstr "" + +msgid "Section removed" +msgstr "" + +msgid "See \"mount\" manpage for details" +msgstr "" + +msgid "" +"Send LCP echo requests at the given interval in seconds, only effective in " +"conjunction with failure threshold" +msgstr "" + +msgid "Send router solicitations" +msgstr "" + +msgid "Separate Clients" +msgstr "" + +msgid "Separate WDS" +msgstr "" + +msgid "Server Settings" +msgstr "" + +msgid "Service Name" +msgstr "" + +msgid "Service Type" +msgstr "" + +msgid "Services" +msgstr "" + +msgid "Setup DHCP Server" +msgstr "" + +msgid "Setup Time Synchronization" +msgstr "" + +msgid "Show current backup file list" +msgstr "" + +msgid "Shutdown this interface" +msgstr "" + +msgid "Shutdown this network" +msgstr "" + +msgid "Signal" +msgstr "" + +msgid "Signal:" +msgstr "" + +msgid "Size" +msgstr "" + +msgid "Skip" +msgstr "" + +msgid "Skip to content" +msgstr "" + +msgid "Skip to navigation" +msgstr "" + +msgid "Slot time" +msgstr "" + +msgid "Software" +msgstr "" + +msgid "Some fields are invalid, cannot save values!" +msgstr "" + +msgid "Sorry, the object you requested was not found." +msgstr "" + +msgid "Sorry, the server encountered an unexpected error." +msgstr "" + +msgid "" +"Sorry, there is no sysupgrade support present, a new firmware image must be " +"flashed manually. Please refer to the OpenWrt wiki for device specific " +"install instructions." +msgstr "" + +msgid "Sort" +msgstr "" + +msgid "Source" +msgstr "" + +msgid "Specifies the advertised preferred prefix lifetime in seconds" +msgstr "" + +msgid "Specifies the advertised valid prefix lifetime in seconds" +msgstr "" + +msgid "Specifies the button state to handle" +msgstr "" + +msgid "Specifies the directory the device is attached to" +msgstr "" + +msgid "Specifies the listening port of this Dropbear instance" +msgstr "" + +msgid "" +"Specifies the maximum amount of failed ARP requests until hosts are presumed " +"to be dead" +msgstr "" + +msgid "" +"Specifies the maximum amount of seconds after which hosts are presumed to be " +"dead" +msgstr "" + +msgid "Specify the secret encryption key here." +msgstr "" + +msgid "Start" +msgstr "" + +msgid "Start priority" +msgstr "" + +msgid "Startup" +msgstr "" + +msgid "Static IPv4 Routes" +msgstr "" + +msgid "Static IPv6 Routes" +msgstr "" + +msgid "Static Leases" +msgstr "" + +msgid "Static Routes" +msgstr "" + +msgid "Static WDS" +msgstr "" + +msgid "Static address" +msgstr "" + +msgid "" +"Static leases are used to assign fixed IP addresses and symbolic hostnames " +"to DHCP clients. They are also required for non-dynamic interface " +"configurations where only hosts with a corresponding lease are served." +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Stop" +msgstr "" + +msgid "Strict order" +msgstr "" + +msgid "Submit" +msgstr "" + +msgid "Swap Entry" +msgstr "" + +msgid "Switch" +msgstr "" + +msgid "Switch %q" +msgstr "" + +msgid "Switch %q (%s)" +msgstr "" + +msgid "Switch protocol" +msgstr "" + +msgid "Sync with browser" +msgstr "" + +msgid "Synchronizing..." +msgstr "" + +msgid "System" +msgstr "" + +msgid "System Log" +msgstr "" + +msgid "System Properties" +msgstr "" + +msgid "System log buffer size" +msgstr "" + +msgid "TCP:" +msgstr "" + +msgid "TFTP Settings" +msgstr "" + +msgid "TFTP server root" +msgstr "" + +msgid "TX" +msgstr "" + +msgid "TX Rate" +msgstr "" + +msgid "Table" +msgstr "" + +msgid "Target" +msgstr "" + +msgid "Terminate" +msgstr "" + +msgid "" +"The Device Configuration section covers physical settings of the " +"radio hardware such as channel, transmit power or antenna selection which is " +"shared among all defined wireless networks (if the radio hardware is multi-" +"SSID capable). Per network settings like encryption or operation mode are " +"grouped in the Interface Configuration." +msgstr "" + +msgid "" +"The libiwinfo-lua package is not installed. You must install this " +"component for working wireless configuration!" +msgstr "" + +msgid "" +"The IPv6 prefix assigned to the provider, usually ends with ::" +msgstr "" + +msgid "" +"The allowed characters are: A-Z, a-z, 0-9 and _" +msgstr "" + +msgid "" +"The device file of the memory or partition (e.g." +" /dev/sda1)" +msgstr "" + +msgid "" +"The filesystem that was used to format the memory (e.g. ext3)" +msgstr "" + +msgid "" +"The flash image was uploaded. Below is the checksum and file size listed, " +"compare them with the original file to ensure data integrity.
Click " +"\"Proceed\" below to start the flash procedure." +msgstr "" + +msgid "The following changes have been committed" +msgstr "" + +msgid "The following changes have been reverted" +msgstr "" + +msgid "The following rules are currently active on this system." +msgstr "" + +msgid "The given network name is not unique" +msgstr "" + +msgid "" +"The hardware is not multi-SSID capable and existing configuration will be " +"replaced if you proceed." +msgstr "" + +msgid "" +"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 " +"addresses." +msgstr "" + +msgid "The length of the IPv6 prefix in bits" +msgstr "" + +msgid "" +"The network ports on this device can be combined to several VLANs in which computers can " +"communicate directly with each other. VLANs are often used to separate different network " +"segments. Often there is by default one Uplink port for a connection to the " +"next greater network like the internet and other ports for a local network." +msgstr "" + +msgid "The selected protocol needs a device assigned" +msgstr "" + +msgid "" +"The system is erasing the configuration partition now and will reboot itself " +"when finished." +msgstr "" + +msgid "" +"The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a " +"few minutes until you try to reconnect. It might be necessary to renew the " +"address of your computer to reach the device again, depending on your " +"settings." +msgstr "" + +msgid "" +"The uploaded image file does not contain a supported format. Make sure that " +"you choose the generic image format for your platform." +msgstr "" + +msgid "There are no active leases." +msgstr "" + +msgid "There are no pending changes to apply!" +msgstr "" + +msgid "There are no pending changes to revert!" +msgstr "" + +msgid "There are no pending changes!" +msgstr "" + +msgid "" +"There is no device assigned yet, please attach a network device in the " +"\"Physical Settings\" tab" +msgstr "" + +msgid "" +"There is no password set on this router. Please configure a root password to " +"protect the web interface and enable SSH." +msgstr "" + +msgid "This IPv4 address of the relay" +msgstr "" + +msgid "" +"This is a list of shell glob patterns for matching files and directories to " +"include during sysupgrade. Modified files in /etc/config/ and certain other " +"configurations are automatically preserved." +msgstr "" + +msgid "This is the 32 byte hex encoded user ID, not the login name" +msgstr "" + +msgid "" +"This is the content of /etc/rc.local. Insert your own commands here (in " +"front of 'exit 0') to execute them at the end of the boot process." +msgstr "" + +msgid "" +"This is the local endpoint address assigned by the tunnel broker, it usually " +"ends with :2" +msgstr "" + +msgid "" +"This is the only DHCP in the local network" +msgstr "" + +msgid "This is the system crontab in which scheduled tasks can be defined." +msgstr "" + +msgid "" +"This is usually the address of the nearest PoP operated by the tunnel broker" +msgstr "" + +msgid "" +"This list gives an overview over currently running system processes and " +"their status." +msgstr "" + +msgid "This page allows the configuration of custom button actions" +msgstr "" + +msgid "This page gives an overview over currently active network connections." +msgstr "" + +msgid "This section contains no values yet" +msgstr "" + +msgid "Time Synchronization" +msgstr "" + +msgid "Time Synchronization is not configured yet." +msgstr "" + +msgid "Timezone" +msgstr "" + +msgid "" +"To restore configuration files, you can upload a previously generated backup " +"archive here." +msgstr "" + +msgid "Total Available" +msgstr "" + +msgid "Traceroute" +msgstr "" + +msgid "Traffic" +msgstr "" + +msgid "Transfer" +msgstr "" + +msgid "Transmission Rate" +msgstr "" + +msgid "Transmit" +msgstr "" + +msgid "Transmit Power" +msgstr "" + +msgid "Transmitter Antenna" +msgstr "" + +msgid "Trigger" +msgstr "" + +msgid "Trigger Mode" +msgstr "" + +msgid "Tunnel ID" +msgstr "" + +msgid "Tunnel Interface" +msgstr "" + +msgid "Turbo Mode" +msgstr "" + +msgid "Tx-Power" +msgstr "" + +msgid "Type" +msgstr "" + +msgid "UDP:" +msgstr "" + +msgid "UMTS only" +msgstr "" + +msgid "UMTS/GPRS/EV-DO" +msgstr "" + +msgid "USB Device" +msgstr "" + +msgid "UUID" +msgstr "" + +msgid "Unable to dispatch" +msgstr "" + +msgid "Unknown" +msgstr "" + +msgid "Unknown Error, password not changed!" +msgstr "" + +msgid "Unmanaged" +msgstr "" + +msgid "Unsaved Changes" +msgstr "" + +msgid "Unsupported protocol type." +msgstr "" + +msgid "Update lists" +msgstr "" + +msgid "" +"Upload a sysupgrade-compatible image here to replace the running firmware. " +"Check \"Keep settings\" to retain the current configuration (requires an " +"OpenWrt compatible firmware image)." +msgstr "" + +msgid "Upload archive..." +msgstr "" + +msgid "Uploaded File" +msgstr "" + +msgid "Uptime" +msgstr "" + +msgid "Use /etc/ethers" +msgstr "" + +msgid "Use DHCP gateway" +msgstr "" + +msgid "Use DNS servers advertised by peer" +msgstr "" + +msgid "Use ISO/IEC 3166 alpha2 country codes." +msgstr "" + +msgid "Use MTU on tunnel interface" +msgstr "" + +msgid "Use TTL on tunnel interface" +msgstr "" + +msgid "Use as root filesystem" +msgstr "" + +msgid "Use broadcast flag" +msgstr "" + +msgid "Use custom DNS servers" +msgstr "" + +msgid "Use default gateway" +msgstr "" + +msgid "Use gateway metric" +msgstr "" + +msgid "Use preferred lifetime" +msgstr "" + +msgid "Use routing table" +msgstr "" + +msgid "" +"Use the Add Button to add a new lease entry. The MAC-Address indentifies the host, the IPv4-Address specifies to the fixed " +"address to use and the Hostname is assigned as symbolic name to the " +"requesting host." +msgstr "" + +msgid "Use valid lifetime" +msgstr "" + +msgid "Used" +msgstr "" + +msgid "Used Key Slot" +msgstr "" + +msgid "Username" +msgstr "" + +msgid "VC-Mux" +msgstr "" + +msgid "VLAN Interface" +msgstr "" + +msgid "VLANs on %q" +msgstr "" + +msgid "VLANs on %q (%s)" +msgstr "" + +msgid "VPN Server" +msgstr "" + +msgid "Vendor Class to send when requesting DHCP" +msgstr "" + +msgid "Verify" +msgstr "" + +msgid "Version" +msgstr "" + +msgid "WDS" +msgstr "" + +msgid "WEP Open System" +msgstr "" + +msgid "WEP Shared Key" +msgstr "" + +msgid "WEP passphrase" +msgstr "" + +msgid "WMM Mode" +msgstr "" + +msgid "WPA passphrase" +msgstr "" + +msgid "" +"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " +"and ad-hoc mode) to be installed." +msgstr "" + +msgid "Waiting for changes to be applied..." +msgstr "" + +msgid "Waiting for command to complete..." +msgstr "" + +msgid "Warning" +msgstr "" + +msgid "Warning: There are unsaved changes that will be lost while rebooting!" +msgstr "" + +msgid "Wifi" +msgstr "" + +msgid "Wireless" +msgstr "" + +msgid "Wireless Adapter" +msgstr "" + +msgid "Wireless Network" +msgstr "" + +msgid "Wireless Overview" +msgstr "" + +msgid "Wireless Security" +msgstr "" + +msgid "Wireless is disabled or not associated" +msgstr "" + +msgid "Wireless is restarting..." +msgstr "" + +msgid "Wireless network is disabled" +msgstr "" + +msgid "Wireless network is enabled" +msgstr "" + +msgid "Wireless restarted" +msgstr "" + +msgid "Wireless shut down" +msgstr "" + +msgid "Write received DNS requests to syslog" +msgstr "" + +msgid "XR Support" +msgstr "" + +msgid "" +"You can enable or disable installed init scripts here. Changes will applied " +"after a device reboot.
Warning: If you disable essential init " +"scripts like \"network\", your device might become inaccessible!" +msgstr "" + +msgid "" +"You must enable Java Script in your browser or LuCI will not work properly." +msgstr "" + +msgid "any" +msgstr "" + +msgid "auto" +msgstr "" + +msgid "baseT" +msgstr "" + +msgid "bridged" +msgstr "" + +msgid "create:" +msgstr "" + +msgid "creates a bridge over specified interface(s)" +msgstr "" + +msgid "dB" +msgstr "" + +msgid "dBm" +msgstr "" + +msgid "disable" +msgstr "" + +msgid "expired" +msgstr "" + +msgid "" +"file where given DHCP-leases will be stored" +msgstr "" + +msgid "forward" +msgstr "" + +msgid "full-duplex" +msgstr "" + +msgid "half-duplex" +msgstr "" + +msgid "help" +msgstr "" + +msgid "hidden" +msgstr "" + +msgid "if target is a network" +msgstr "" + +msgid "input" +msgstr "" + +msgid "kB" +msgstr "" + +msgid "kB/s" +msgstr "" + +msgid "kbit/s" +msgstr "" + +msgid "local DNS file" +msgstr "" + +msgid "no" +msgstr "" + +msgid "no link" +msgstr "" + +msgid "none" +msgstr "" + +msgid "off" +msgstr "" + +msgid "on" +msgstr "" + +msgid "open" +msgstr "" + +msgid "routed" +msgstr "" + +msgid "tagged" +msgstr "" + +msgid "unknown" +msgstr "" + +msgid "unlimited" +msgstr "" + +msgid "unspecified" +msgstr "" + +msgid "unspecified -or- create:" +msgstr "" + +msgid "untagged" +msgstr "" + +msgid "yes" +msgstr "" + +msgid "« Back" +msgstr "" diff --git a/po/sk/commands.po b/po/sk/commands.po new file mode 100644 index 0000000000..4133dfb2d5 --- /dev/null +++ b/po/sk/commands.po @@ -0,0 +1,91 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "A short textual description of the configured command" +msgstr "" + +msgid "Access command with" +msgstr "" + +msgid "" +"Allow executing the command and downloading its output without prior " +"authentication" +msgstr "" + +msgid "Allow the user to provide additional command line arguments" +msgstr "" + +msgid "Arguments:" +msgstr "" + +msgid "Binary data not displayed, download instead." +msgstr "" + +msgid "Code:" +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "Command" +msgstr "" + +msgid "Command failed" +msgstr "" + +msgid "Command line to execute" +msgstr "" + +msgid "Command successful" +msgstr "" + +msgid "Command:" +msgstr "" + +msgid "Configure" +msgstr "" + +msgid "Custom Commands" +msgstr "" + +msgid "Custom arguments" +msgstr "" + +msgid "Dashboard" +msgstr "" + +msgid "Description" +msgstr "" + +msgid "Download" +msgstr "" + +msgid "Failed to execute command!" +msgstr "" + +msgid "Link" +msgstr "" + +msgid "Loading" +msgstr "" + +msgid "Public access" +msgstr "" + +msgid "Run" +msgstr "" + +msgid "" +"This page allows you to configure custom shell commands which can be easily " +"invoked from the web interface." +msgstr "" + +msgid "Waiting for command to complete..." +msgstr "" diff --git a/po/sk/coovachilli.po b/po/sk/coovachilli.po new file mode 100644 index 0000000000..bb5b1b9ff4 --- /dev/null +++ b/po/sk/coovachilli.po @@ -0,0 +1,21 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "CoovaChilli" +msgstr "" + +msgid "Network Configuration" +msgstr "" + +msgid "RADIUS configuration" +msgstr "" + +msgid "UAM and MAC Authentication" +msgstr "" diff --git a/po/sk/ddns.po b/po/sk/ddns.po new file mode 100644 index 0000000000..f14456db01 --- /dev/null +++ b/po/sk/ddns.po @@ -0,0 +1,80 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Check for changed IP every" +msgstr "" + +msgid "Check-time unit" +msgstr "" + +msgid "Custom update-URL" +msgstr "" + +msgid "Dynamic DNS" +msgstr "" + +msgid "" +"Dynamic DNS allows that your router can be reached with a fixed hostname " +"while having a dynamically changing IP address." +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Event interface" +msgstr "" + +msgid "Force update every" +msgstr "" + +msgid "Force-time unit" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "On which interface up should start the ddns script process." +msgstr "" + +msgid "Password" +msgstr "" + +msgid "Service" +msgstr "" + +msgid "Source of IP address" +msgstr "" + +msgid "URL" +msgstr "" + +msgid "Username" +msgstr "" + +msgid "custom" +msgstr "" + +msgid "h" +msgstr "" + +msgid "interface" +msgstr "" + +msgid "min" +msgstr "" + +msgid "network" +msgstr "" diff --git a/po/sk/diag_core.po b/po/sk/diag_core.po new file mode 100644 index 0000000000..389516fd12 --- /dev/null +++ b/po/sk/diag_core.po @@ -0,0 +1,30 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Configure Diagnostics" +msgstr "" + +msgid "Diagnostics" +msgstr "" + +msgid "" +"The diagnostics available under this menu depend on what modules you have " +"installed on your device." +msgstr "" + +msgid "" +"The entries in the menu allow you to perform diagnostic tests on your system " +"to aid in troubleshooting." +msgstr "" + +msgid "" +"With this menu you can configure network diagnostics, such as network device " +"scans and ping tests." +msgstr "" diff --git a/po/sk/diag_devinfo.po b/po/sk/diag_devinfo.po new file mode 100644 index 0000000000..0d62204ca1 --- /dev/null +++ b/po/sk/diag_devinfo.po @@ -0,0 +1,206 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Actions" +msgstr "" + +msgid "Add" +msgstr "" + +msgid "Beginning of MAC address range" +msgstr "" + +msgid "Config Phone Scan" +msgstr "" + +msgid "Configure" +msgstr "" + +msgid "Configure Scans" +msgstr "" + +msgid "" +"Configure scanning for devices on specified networks. Decreasing 'Timeout', " +"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also " +"may fail to find some devices." +msgstr "" + +msgid "" +"Configure scanning for supported SIP devices on specified networks. " +"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may " +"speed up scans, but also may fail to find some devices." +msgstr "" + +msgid "Delete" +msgstr "" + +msgid "Device Scan Config" +msgstr "" + +msgid "Device Type" +msgstr "" + +msgid "Devices discovered for" +msgstr "" + +msgid "Devices on Network" +msgstr "" + +msgid "Edit" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "End of MAC address range" +msgstr "" + +msgid "Go to relevant configuration page" +msgstr "" + +msgid "IP Address" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Invalid" +msgstr "" + +msgid "Link to Device" +msgstr "" + +msgid "MAC Address" +msgstr "" + +msgid "MAC Device Info Overrides" +msgstr "" + +msgid "MAC Device Override" +msgstr "" + +msgid "MAC range and information used to override system and IEEE databases" +msgstr "" + +msgid "Milliseconds to sleep between requests (default 100)" +msgstr "" + +msgid "Model" +msgstr "" + +msgid "Name" +msgstr "" + +msgid "Network Device Scan" +msgstr "" + +msgid "Network Device Scanning Configuration" +msgstr "" + +msgid "Networks to scan for devices" +msgstr "" + +msgid "Networks to scan for supported devices" +msgstr "" + +msgid "No SIP devices" +msgstr "" + +msgid "No devices detected" +msgstr "" + +msgid "Number of times to send requests (default 1)" +msgstr "" + +msgid "OUI Owner" +msgstr "" + +msgid "" +"Override the information returned by the MAC to Device Info Script (mac-to-" +"devinfo) for a specified range of MAC Addresses" +msgstr "" + +msgid "Perform Scans (this can take a few minutes)" +msgstr "" + +msgid "Phone Information" +msgstr "" + +msgid "Phone Scan" +msgstr "" + +msgid "Phone Scanning Configuration" +msgstr "" + +msgid "Phones" +msgstr "" + +msgid "Ports" +msgstr "" + +msgid "Raw" +msgstr "" + +msgid "Repeat Count" +msgstr "" + +msgid "Repeat Scans (this can take a few minutes)" +msgstr "" + +msgid "SIP Device Information" +msgstr "" + +msgid "SIP Device Scan" +msgstr "" + +msgid "SIP Device Scanning Configuration" +msgstr "" + +msgid "SIP Devices on Network" +msgstr "" + +msgid "SIP devices discovered for" +msgstr "" + +msgid "Scan for devices on specified networks." +msgstr "" + +msgid "Scan for supported SIP devices on specified networks." +msgstr "" + +msgid "Scanning Configuration" +msgstr "" + +msgid "Scans for devices on specified networks." +msgstr "" + +msgid "Sleep Between Requests" +msgstr "" + +msgid "Subnet" +msgstr "" + +msgid "This section contains no values yet" +msgstr "" + +msgid "Time to wait for responses in seconds (default 10)" +msgstr "" + +msgid "Timeout" +msgstr "" + +msgid "Use Configuration" +msgstr "" + +msgid "Vendor" +msgstr "" + +msgid "check other networks" +msgstr "" diff --git a/po/sk/ffwizard.po b/po/sk/ffwizard.po new file mode 100644 index 0000000000..96ff0d2f39 --- /dev/null +++ b/po/sk/ffwizard.po @@ -0,0 +1,159 @@ +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ASCII\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Allow to transfer anonymous statistics about this node" +msgstr "" + +msgid "Channel" +msgstr "" + +msgid "Check this to protect your LAN from other nodes or clients" +msgstr "" + +msgid "Configure network" +msgstr "" + +msgid "Connect your node with other nodes with a tunnel via the internet." +msgstr "" + +msgid "DHCP IP range" +msgstr "" + +msgid "DHCP will automatically assign ip addresses to clients" +msgstr "" + +msgid "DNS Server" +msgstr "" + +msgid "Enable DHCP" +msgstr "" + +msgid "Gateway" +msgstr "" + +msgid "Heartbeat" +msgstr "" + +msgid "IP address" +msgstr "" + +msgid "L2gvpn tunnel" +msgstr "" + +msgid "Limit download bandwidth" +msgstr "" + +msgid "Limit upload bandwidth" +msgstr "" + +msgid "Mesh IP address" +msgstr "" + +msgid "Mesh IPv6 Address" +msgstr "" + +msgid "Netmask" +msgstr "" + +msgid "Password" +msgstr "" + +msgid "Password confirmation" +msgstr "" + +msgid "Password successfully changed" +msgstr "" + +msgid "Protect LAN" +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "Select this checkbox to configure your network interfaces." +msgstr "" + +msgid "" +"Select this to allow others to use your connection to access the internet." +msgstr "" + +msgid "Share your internet connection" +msgstr "" + +msgid "" +"The IP range from which clients are assigned ip addresses (e.g. " +"10.1.2.1/28). If this is a range inside your mesh network range, then it " +"will be announced as HNA. Any other range will use NAT. If left empty then " +"the defaults from the community profile will be used." +msgstr "" + +msgid "The ipv6 address is calculated auomatically." +msgstr "" + +msgid "The protocol to use for internet connectivity." +msgstr "" + +msgid "" +"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be " +"registered at your local community." +msgstr "" + +msgid "This will setup a new virtual wireless interface in Access Point mode." +msgstr "" + +msgid "" +"This wizard will assist you in setting up your router for Freifunk or " +"another similar wireless community network." +msgstr "" + +msgid "Unknown Error" +msgstr "" + +msgid "Username" +msgstr "" + +msgid "Virtual Access Point (VAP)" +msgstr "" + +msgid "Wizard" +msgstr "" + +msgid "Your device and neighbouring nodes have to use the same channel." +msgstr "" + +msgid "dhcp" +msgstr "" + +msgid "kbit/s" +msgstr "" + +msgid "static" +msgstr "" + +msgid "Configure this interface." +msgstr "" + +msgid "recommended" +msgstr "" + +msgid "Basic settings" +msgstr "" + +msgid "Basic settings are incomplete. Please go to" +msgstr "" + +msgid "Error" +msgstr "" + +msgid "You can not use the wizard because some necessary values are missing." +msgstr "" + +msgid "and fill out all required fields." +msgstr "" diff --git a/po/sk/firewall.po b/po/sk/firewall.po new file mode 100644 index 0000000000..162786a31a --- /dev/null +++ b/po/sk/firewall.po @@ -0,0 +1,429 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "%s in %s" +msgstr "" + +msgid "%s%s with %s" +msgstr "" + +msgid "%s, %s in %s" +msgstr "" + +msgid "(Unnamed Entry)" +msgstr "" + +msgid "(Unnamed Rule)" +msgstr "" + +msgid "(Unnamed SNAT)" +msgstr "" + +msgid "-- Please choose --" +msgstr "" + +msgid "-- custom --" +msgstr "" + +msgid "%d pkts. per %s" +msgstr "" + +msgid "%d pkts. per %s, burst %d pkts." +msgstr "" + +msgid "%s and limit to %s" +msgstr "" + +msgid "Action" +msgstr "" + +msgid "Add" +msgstr "" + +msgid "Add and edit..." +msgstr "" + +msgid "Advanced Settings" +msgstr "" + +msgid "Allow forward from source zones:" +msgstr "" + +msgid "Allow forward to destination zones:" +msgstr "" + +msgid "Any" +msgstr "" + +msgid "Covered networks" +msgstr "" + +msgid "Custom Rules" +msgstr "" + +msgid "" +"Custom rules allow you to execute arbritary iptables commands which are not " +"otherwise covered by the firewall framework. The commands are executed after " +"each firewall restart, right after the default ruleset has been loaded." +msgstr "" + +msgid "Destination IP address" +msgstr "" + +msgid "Destination address" +msgstr "" + +msgid "Destination port" +msgstr "" + +msgid "Destination zone" +msgstr "" + +msgid "Do not rewrite" +msgstr "" + +msgid "Drop invalid packets" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Enable NAT Loopback" +msgstr "" + +msgid "Enable SYN-flood protection" +msgstr "" + +msgid "Enable logging on this zone" +msgstr "" + +msgid "External IP address" +msgstr "" + +msgid "External port" +msgstr "" + +msgid "External zone" +msgstr "" + +msgid "Extra arguments" +msgstr "" + +msgid "Firewall" +msgstr "" + +msgid "Firewall - Custom Rules" +msgstr "" + +msgid "Firewall - Port Forwards" +msgstr "" + +msgid "Firewall - Traffic Rules" +msgstr "" + +msgid "Firewall - Zone Settings" +msgstr "" + +msgid "Force connection tracking" +msgstr "" + +msgid "Forward" +msgstr "" + +msgid "Forward to" +msgstr "" + +msgid "From %s in %s" +msgstr "" + +msgid "From %s in %s with source %s" +msgstr "" + +msgid "From %s in %s with source %s and %s" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "IPv4" +msgstr "" + +msgid "IPv4 and IPv6" +msgstr "" + +msgid "IPv4 only" +msgstr "" + +msgid "IPv6" +msgstr "" + +msgid "IPv6 only" +msgstr "" + +msgid "Input" +msgstr "" + +msgid "Inter-Zone Forwarding" +msgstr "" + +msgid "Internal IP address" +msgstr "" + +msgid "Internal port" +msgstr "" + +msgid "Internal zone" +msgstr "" + +msgid "Limit log messages" +msgstr "" + +msgid "MSS clamping" +msgstr "" + +msgid "Masquerading" +msgstr "" + +msgid "Match" +msgstr "" + +msgid "Match ICMP type" +msgstr "" + +msgid "Match forwarded traffic to the given destination port or port range." +msgstr "" + +msgid "" +"Match incoming traffic directed at the given destination port or port range " +"on this host" +msgstr "" + +msgid "" +"Match incoming traffic originating from the given source port or port range " +"on the client host." +msgstr "" + +msgid "Name" +msgstr "" + +msgid "New SNAT rule" +msgstr "" + +msgid "New forward rule" +msgstr "" + +msgid "New input rule" +msgstr "" + +msgid "New port forward" +msgstr "" + +msgid "New source NAT" +msgstr "" + +msgid "Only match incoming traffic directed at the given IP address." +msgstr "" + +msgid "Only match incoming traffic from these MACs." +msgstr "" + +msgid "Only match incoming traffic from this IP or range." +msgstr "" + +msgid "" +"Only match incoming traffic originating from the given source port or port " +"range on the client host" +msgstr "" + +msgid "Open ports on router" +msgstr "" + +msgid "Other..." +msgstr "" + +msgid "Output" +msgstr "" + +msgid "Passes additional arguments to iptables. Use with care!" +msgstr "" + +msgid "Port Forwards" +msgstr "" + +msgid "" +"Port forwarding allows remote computers on the Internet to connect to a " +"specific computer or service within the private LAN." +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "" +"Redirect matched incoming traffic to the given port on the internal host" +msgstr "" + +msgid "Redirect matched incoming traffic to the specified internal host" +msgstr "" + +msgid "Restrict Masquerading to given destination subnets" +msgstr "" + +msgid "Restrict Masquerading to given source subnets" +msgstr "" + +msgid "Restrict to address family" +msgstr "" + +msgid "Rewrite matched traffic to the given address." +msgstr "" + +msgid "" +"Rewrite matched traffic to the given source port. May be left empty to only " +"rewrite the IP address." +msgstr "" + +msgid "Rewrite to source %s" +msgstr "" + +msgid "Rewrite to source %s, %s" +msgstr "" + +msgid "SNAT IP address" +msgstr "" + +msgid "SNAT port" +msgstr "" + +msgid "Source IP address" +msgstr "" + +msgid "Source MAC address" +msgstr "" + +msgid "Source NAT" +msgstr "" + +msgid "" +"Source NAT is a specific form of masquerading which allows fine grained " +"control over the source IP used for outgoing traffic, for example to map " +"multiple WAN addresses to internal subnets." +msgstr "" + +msgid "Source address" +msgstr "" + +msgid "Source port" +msgstr "" + +msgid "Source zone" +msgstr "" + +msgid "" +"The firewall creates zones over your network interfaces to control network " +"traffic flow." +msgstr "" + +msgid "" +"The options below control the forwarding policies between this zone (%s) and " +"other zones. Destination zones cover forwarded traffic " +"originating from %q. Source zones match forwarded " +"traffic from other zones targeted at %q. The forwarding " +"rule is unidirectional, e.g. a forward from lan to wan does " +"not imply a permission to forward from wan to lan as well." +msgstr "" + +msgid "" +"This page allows you to change advanced properties of the port forwarding " +"entry. In most cases there is no need to modify those settings." +msgstr "" + +msgid "" +"This page allows you to change advanced properties of the traffic rule " +"entry, such as matched source and destination hosts." +msgstr "" + +msgid "" +"This section defines common properties of %q. The input and " +"output options set the default policies for traffic entering and " +"leaving this zone while the forward option describes the policy for " +"forwarded traffic between different networks within the zone. Covered " +"networks specifies which available networks are member of this zone." +msgstr "" + +msgid "To %s at %s on this device" +msgstr "" + +msgid "To %s in %s" +msgstr "" + +msgid "To %s on this device" +msgstr "" + +msgid "To %s, %s in %s" +msgstr "" + +msgid "To source IP" +msgstr "" + +msgid "To source port" +msgstr "" + +msgid "Traffic Rules" +msgstr "" + +msgid "" +"Traffic rules define policies for packets traveling between different zones, " +"for example to reject traffic between certain hosts or to open WAN ports on " +"the router." +msgstr "" + +msgid "Via %s" +msgstr "" + +msgid "Via %s at %s" +msgstr "" + +msgid "" +"You may specify multiple by selecting \"-- custom --\" and then entering " +"protocols separated by space." +msgstr "" + +msgid "Zone %q" +msgstr "" + +msgid "Zone ⇒ Forwardings" +msgstr "" + +msgid "Zones" +msgstr "" + +msgid "accept" +msgstr "" + +msgid "any" +msgstr "" + +msgid "any host" +msgstr "" + +msgid "any router IP" +msgstr "" + +msgid "any zone" +msgstr "" + +msgid "don't track" +msgstr "" + +msgid "drop" +msgstr "" + +msgid "reject" +msgstr "" diff --git a/po/sk/freifunk-policyrouting.po b/po/sk/freifunk-policyrouting.po new file mode 100644 index 0000000000..b1a7810324 --- /dev/null +++ b/po/sk/freifunk-policyrouting.po @@ -0,0 +1,49 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "" +"All traffic from interfaces belonging to these zones will be sent via a " +"gateway in the mesh network." +msgstr "" + +msgid "Enable Policy Routing" +msgstr "" + +msgid "Fallback to mesh" +msgstr "" + +msgid "Firewall zones" +msgstr "" + +msgid "" +"If no default route is received from the mesh network then traffic which " +"belongs to the selected firewall zones is routed via your internet " +"connection as a fallback. If you do not want this and instead block that " +"traffic then you should select this option." +msgstr "" + +msgid "" +"If your own gateway is not available then fallback to the mesh default " +"gateway." +msgstr "" + +msgid "Policy Routing" +msgstr "" + +msgid "Strict Filtering" +msgstr "" + +msgid "" +"These pages can be used to setup policy routing for certain firewall zones. " +"This is useful if you need to use your own internet connection for yourself " +"but you don't want to share it with others (thats why it can also be called " +"'Ego Mode'). Your own traffic is then sent via your internet connection " +"while traffic originating from the mesh will use another gateway in the mesh." +msgstr "" diff --git a/po/sk/freifunk.po b/po/sk/freifunk.po new file mode 100644 index 0000000000..f9ce1b7a31 --- /dev/null +++ b/po/sk/freifunk.po @@ -0,0 +1,385 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "BSSID" +msgstr "" + +msgid "Bad (ETX > 10)" +msgstr "" + +msgid "Basic Settings" +msgstr "" + +msgid "Basic settings" +msgstr "" + +msgid "Basic settings are incomplete. Please go to" +msgstr "" + +msgid "Basic system settings" +msgstr "" + +msgid "Bitrate" +msgstr "" + +msgid "Channel" +msgstr "" + +msgid "Check for new firmware versions and perform automatic updates." +msgstr "" + +msgid "Client network size" +msgstr "" + +msgid "Community" +msgstr "" + +msgid "Community profile" +msgstr "" + +msgid "Community settings" +msgstr "" + +msgid "Confirm Upgrade" +msgstr "" + +msgid "Contact" +msgstr "" + +msgid "Contact information is incomplete. Please go to" +msgstr "" + +msgid "Coordinates" +msgstr "" + +msgid "Country code" +msgstr "" + +msgid "Default routes" +msgstr "" + +msgid "Disable default content" +msgstr "" + +msgid "Diversity is enabled for device" +msgstr "" + +msgid "E-Mail" +msgstr "" + +msgid "ESSID" +msgstr "" + +msgid "Edit index page" +msgstr "" + +msgid "Enable IPv6" +msgstr "" + +msgid "Error" +msgstr "" + +msgid "Find your coordinates with OpenStreetMap" +msgstr "" + +msgid "Freifunk" +msgstr "" + +msgid "Freifunk Overview" +msgstr "" + +msgid "Freifunk Remote Update" +msgstr "" + +msgid "Gateway" +msgstr "" + +msgid "Go to" +msgstr "" + +msgid "Good (2 < ETX < 4)" +msgstr "" + +msgid "Green" +msgstr "" + +msgid "Hello and welcome in the network of" +msgstr "" + +msgid "Hide OpenStreetMap" +msgstr "" + +msgid "Homepage" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "IPv6 Config" +msgstr "" + +msgid "IPv6 Prefix" +msgstr "" + +msgid "IPv6 network in CIDR notation." +msgstr "" + +msgid "If selected then the default content element is not shown." +msgstr "" + +msgid "If you are interested in our project then contact the local community" +msgstr "" + +msgid "Index Page" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "" +"Internet access depends on technical and organisational conditions and may " +"or may not work for you." +msgstr "" + +msgid "It is operated by" +msgstr "" + +msgid "Keep configuration" +msgstr "" + +msgid "Latitude" +msgstr "" + +msgid "Legend" +msgstr "" + +msgid "Load" +msgstr "" + +msgid "Local Time" +msgstr "" + +msgid "Location" +msgstr "" + +msgid "Longitude" +msgstr "" + +msgid "Map" +msgstr "" + +msgid "Map Error" +msgstr "" + +msgid "Memory" +msgstr "" + +msgid "Mesh prefix" +msgstr "" + +msgid "Metric" +msgstr "" + +msgid "Mode" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "Network for client DHCP addresses" +msgstr "" + +msgid "Nickname" +msgstr "" + +msgid "No default routes known." +msgstr "" + +msgid "Notice" +msgstr "" + +msgid "OLSR" +msgstr "" + +msgid "Operator" +msgstr "" + +msgid "Orange" +msgstr "" + +msgid "Overview" +msgstr "" + +msgid "Package libiwinfo required!" +msgstr "" + +msgid "Phone" +msgstr "" + +msgid "Please fill in your contact details below." +msgstr "" + +msgid "Please set your contact information" +msgstr "" + +msgid "Power" +msgstr "" + +msgid "Processor" +msgstr "" + +msgid "Profile" +msgstr "" + +msgid "Profile (Expert)" +msgstr "" + +msgid "Realname" +msgstr "" + +msgid "Red" +msgstr "" + +msgid "SSID" +msgstr "" + +msgid "" +"Select your location with a mouse click on the map. The map will only show " +"up if you are connected to the Internet." +msgstr "" + +msgid "Show OpenStreetMap" +msgstr "" + +msgid "Show on map" +msgstr "" + +msgid "Signal" +msgstr "" + +msgid "Splash" +msgstr "" + +msgid "Start Upgrade" +msgstr "" + +msgid "Statistics" +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Still usable (4 < ETX < 10)" +msgstr "" + +msgid "System" +msgstr "" + +msgid "TX" +msgstr "" + +msgid "" +"The libiwinfo package is not installed. You must install this " +"component for working wireless configuration!" +msgstr "" + +msgid "" +"The OLSRd service is not configured to capture position data from the " +"network.
Please make sure that the nameservice plugin is properly " +"configured and that the latlon_file option is enabled." +msgstr "" + +msgid "The installed firmware is the most recent version." +msgstr "" + +msgid "" +"These are the basic settings for your local wireless community. These " +"settings define the default values for the wizard and DO NOT affect the " +"actual configuration of the router." +msgstr "" + +msgid "These are the settings of your local community." +msgstr "" + +msgid "" +"These pages will assist you in setting up your router for Freifunk or " +"similar wireless community networks." +msgstr "" + +msgid "This is the access point" +msgstr "" + +msgid "Update Settings" +msgstr "" + +msgid "Update available!" +msgstr "" + +msgid "Uptime" +msgstr "" + +msgid "Verify downloaded images" +msgstr "" + +msgid "Very good (ETX < 2)" +msgstr "" + +msgid "" +"We are an initiative to establish a free, independent and open wireless mesh " +"network." +msgstr "" + +msgid "Wireless Overview" +msgstr "" + +msgid "Yellow" +msgstr "" + +msgid "" +"You can display additional content on the public index page by inserting " +"valid XHTML in the form below.
Headlines should be enclosed between <" +"h2> and </h2>." +msgstr "" + +msgid "" +"You can find further information about the global Freifunk initiative at" +msgstr "" + +msgid "You can manually edit the selected community profile here." +msgstr "" + +msgid "" +"You need to select a profile before you can edit it. To select a profile go " +"to" +msgstr "" + +msgid "and fill out all required fields." +msgstr "" + +msgid "buffered" +msgstr "" + +msgid "cached" +msgstr "" + +msgid "e.g." +msgstr "" + +msgid "free" +msgstr "" + +msgid "to disable it." +msgstr "" + +msgid "used" +msgstr "" + +msgid "wireless settings" +msgstr "" diff --git a/po/sk/hd_idle.po b/po/sk/hd_idle.po new file mode 100644 index 0000000000..6c3a352990 --- /dev/null +++ b/po/sk/hd_idle.po @@ -0,0 +1,41 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Disk" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Enable debug" +msgstr "" + +msgid "Idle-time" +msgstr "" + +msgid "Idle-time unit" +msgstr "" + +msgid "Settings" +msgstr "" + +msgid "h" +msgstr "" + +msgid "hd-idle" +msgstr "" + +msgid "" +"hd-idle is a utility program for spinning-down external disks after a period " +"of idle time." +msgstr "" + +msgid "min" +msgstr "" diff --git a/po/sk/meshwizard.po b/po/sk/meshwizard.po new file mode 100644 index 0000000000..146fac4568 --- /dev/null +++ b/po/sk/meshwizard.po @@ -0,0 +1,119 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Activate or deactivate IPv6 config globally." +msgstr "" + +msgid "Channel" +msgstr "" + +msgid "Check this to protect your LAN from other nodes or clients" +msgstr "" + +msgid "Cleanup config" +msgstr "" + +msgid "Configure this interface" +msgstr "" + +msgid "DHCP IP range" +msgstr "" + +msgid "DHCP will automatically assign ip addresses to clients" +msgstr "" + +msgid "Enable DHCP" +msgstr "" + +msgid "Enable RA" +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "IPv6 Settings" +msgstr "" + +msgid "" +"If this is selected then config is cleaned before setting new config options." +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Mesh IP address" +msgstr "" + +msgid "Mesh IPv6 address" +msgstr "" + +msgid "Mesh Wizard" +msgstr "" + +msgid "" +"Note: this will setup this interface for mesh operation, i.e. add to zone " +"'freifunk' and enable olsr." +msgstr "" + +msgid "Protect LAN" +msgstr "" + +msgid "" +"Select this to allow others to use your connection to access the internet." +msgstr "" + +msgid "Send router advertisements on this device." +msgstr "" + +msgid "Share your internet connection" +msgstr "" + +msgid "" +"The IP range from which clients are assigned ip addresses (e.g. " +"10.1.2.1/28). If this is a range inside your mesh network range, then it " +"will be announced as HNA. Any other range will use NAT. If left empty then " +"the defaults from the community profile will be used." +msgstr "" + +msgid "The given IP address is not inside the mesh network range" +msgstr "" + +msgid "" +"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and " +"has to be registered at your local community." +msgstr "" + +msgid "" +"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be " +"registered at your local community." +msgstr "" + +msgid "This will setup a new virtual wireless interface in Access Point mode." +msgstr "" + +msgid "" +"This wizard will assist you in setting up your router for Freifunk or " +"another similar wireless community network." +msgstr "" + +msgid "Virtual Access Point (VAP)" +msgstr "" + +msgid "Wizard" +msgstr "" + +msgid "Your device and neighbouring nodes have to use the same channel." +msgstr "" + +msgid "recommended" +msgstr "" diff --git a/po/sk/minidlna.po b/po/sk/minidlna.po new file mode 100644 index 0000000000..19c3e536d4 --- /dev/null +++ b/po/sk/minidlna.po @@ -0,0 +1,164 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Advanced Settings" +msgstr "" + +msgid "Album art names:" +msgstr "" + +msgid "Announced model number:" +msgstr "" + +msgid "Announced serial number:" +msgstr "" + +msgid "Browse directory" +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "Database directory:" +msgstr "" + +msgid "Enable TIVO:" +msgstr "" + +msgid "Enable inotify:" +msgstr "" + +msgid "Enable:" +msgstr "" + +msgid "Friendly name:" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "Interfaces:" +msgstr "" + +msgid "Log directory:" +msgstr "" + +msgid "Media directories:" +msgstr "" + +msgid "" +"MiniDLNA is server software with the aim of being fully compliant with DLNA/" +"UPnP-AV clients." +msgstr "" + +msgid "" +"Model number the miniDLNA daemon will report to clients in its XML " +"description." +msgstr "" + +msgid "Music" +msgstr "" + +msgid "Network interfaces to serve." +msgstr "" + +msgid "Notify interval in seconds." +msgstr "" + +msgid "Notify interval:" +msgstr "" + +msgid "Pictures" +msgstr "" + +msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic." +msgstr "" + +msgid "Port:" +msgstr "" + +msgid "Presentation URL:" +msgstr "" + +msgid "Root container:" +msgstr "" + +msgid "" +"Serial number the miniDLNA daemon will report to clients in its XML " +"description." +msgstr "" + +msgid "" +"Set this if you want to customize the name that shows up on your clients." +msgstr "" + +msgid "" +"Set this if you would like to specify the directory where you want MiniDLNA " +"to store its database and album art cache." +msgstr "" + +msgid "" +"Set this if you would like to specify the directory where you want MiniDLNA " +"to store its log file." +msgstr "" + +msgid "" +"Set this to enable inotify monitoring to automatically discover new files." +msgstr "" + +msgid "" +"Set this to enable support for streaming .jpg and .mp3 files to a TiVo " +"supporting HMO." +msgstr "" + +msgid "" +"Set this to strictly adhere to DLNA standards. This will allow server-side " +"downscaling of very large JPEG images, which may hurt JPEG serving " +"performance on (at least) Sony DLNA products." +msgstr "" + +msgid "" +"Set this to the directory you want scanned. If you want to restrict the " +"directory to a specific content type, you can prepend the type ('A' for " +"audio, 'V' for video, 'P' for images), followed by a comma, to the directory " +"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified." +msgstr "" + +msgid "Specify the path to the MiniSSDPd socket." +msgstr "" + +msgid "Standard container" +msgstr "" + +msgid "Strict to DLNA standard:" +msgstr "" + +msgid "" +"The miniDLNA service is active, serving %d audio, %d video and %d image " +"files." +msgstr "" + +msgid "The miniDLNA service is not running." +msgstr "" + +msgid "This is a list of file names to check for when searching for album art." +msgstr "" + +msgid "Video" +msgstr "" + +msgid "miniDLNA" +msgstr "" + +msgid "miniDLNA Status" +msgstr "" + +msgid "miniSSDP socket:" +msgstr "" diff --git a/po/sk/mmc_over_gpio.po b/po/sk/mmc_over_gpio.po new file mode 100644 index 0000000000..587ee42ba5 --- /dev/null +++ b/po/sk/mmc_over_gpio.po @@ -0,0 +1,36 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "CLK_pin" +msgstr "" + +msgid "CS_pin" +msgstr "" + +msgid "DI_pin" +msgstr "" + +msgid "DO_pin" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "MMC/SD driver configuration" +msgstr "" + +msgid "Mode" +msgstr "" + +msgid "Name" +msgstr "" + +msgid "Settings" +msgstr "" diff --git a/po/sk/multiwan.po b/po/sk/multiwan.po new file mode 100644 index 0000000000..b113eac31d --- /dev/null +++ b/po/sk/multiwan.po @@ -0,0 +1,115 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Attempts Before WAN Failover" +msgstr "" + +msgid "Attempts Before WAN Recovery" +msgstr "" + +msgid "Auto" +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "" +"Configure rules for directing outbound traffic through specified WAN Uplinks." +msgstr "" + +msgid "DNS Server(s)" +msgstr "" + +msgid "Default Route" +msgstr "" + +msgid "Destination Address" +msgstr "" + +msgid "Disable" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Failing" +msgstr "" + +msgid "Failover Traffic Destination" +msgstr "" + +msgid "Health Monitor ICMP Host(s)" +msgstr "" + +msgid "Health Monitor ICMP Timeout" +msgstr "" + +msgid "Health Monitor Interval" +msgstr "" + +msgid "" +"Health Monitor detects and corrects network changes and failed connections." +msgstr "" + +msgid "KO" +msgstr "" + +msgid "Load Balancer Distribution" +msgstr "" + +msgid "Load Balancer(Compatibility)" +msgstr "" + +msgid "Load Balancer(Performance)" +msgstr "" + +msgid "Multi-WAN" +msgstr "" + +msgid "Multi-WAN Status" +msgstr "" + +msgid "Multi-WAN Traffic Rules" +msgstr "" + +msgid "" +"Multi-WAN allows for the use of multiple uplinks for load balancing and " +"failover." +msgstr "" + +msgid "None" +msgstr "" + +msgid "OK" +msgstr "" + +msgid "Ports" +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "Recovering" +msgstr "" + +msgid "Source Address" +msgstr "" + +msgid "Unknown" +msgstr "" + +msgid "WAN Interfaces" +msgstr "" + +msgid "WAN Uplink" +msgstr "" + +msgid "all" +msgstr "" diff --git a/po/sk/ntpc.po b/po/sk/ntpc.po new file mode 100644 index 0000000000..d3f8fb8724 --- /dev/null +++ b/po/sk/ntpc.po @@ -0,0 +1,48 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Clock Adjustment" +msgstr "" + +msgid "Count of time measurements" +msgstr "" + +msgid "Current system time" +msgstr "" + +msgid "General" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "Offset frequency" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Synchronizes the system time" +msgstr "" + +msgid "Time Server" +msgstr "" + +msgid "Time Servers" +msgstr "" + +msgid "Time Synchronisation" +msgstr "" + +msgid "Update interval (in seconds)" +msgstr "" + +msgid "empty = infinite" +msgstr "" diff --git a/po/sk/olsr.po b/po/sk/olsr.po new file mode 100644 index 0000000000..d65bf5d9fa --- /dev/null +++ b/po/sk/olsr.po @@ -0,0 +1,576 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Active MID announcements" +msgstr "" + +msgid "Active OLSR nodes" +msgstr "" + +msgid "Active host net announcements" +msgstr "" + +msgid "Advanced Settings" +msgstr "" + +msgid "Allow gateways with NAT" +msgstr "" + +msgid "Allow the selection of an outgoing ipv4 gateway with NAT" +msgstr "" + +msgid "Announce uplink" +msgstr "" + +msgid "Announced network" +msgstr "" + +msgid "Both values must use the dotted decimal notation." +msgstr "" + +msgid "Broadcast address" +msgstr "" + +msgid "Configuration" +msgstr "" + +msgid "Device" +msgstr "" + +msgid "Display" +msgstr "" + +msgid "Downlink" +msgstr "" + +msgid "Download Config" +msgstr "" + +msgid "ETX" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "" +"Enable SmartGateway. If it is disabled, then all other SmartGateway " +"parameters are ignored. Default is \"no\"." +msgstr "" + +msgid "Enable this interface." +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "Expected retransmission count" +msgstr "" + +msgid "FIB metric" +msgstr "" + +msgid "" +"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" " +"means that the metric value is always 2. This is the preferred value because " +"it helps the linux kernel routing to clean up older routes. \"correct\" uses " +"the hopcount as the metric value. \"approx\" use the hopcount as the metric " +"value too, but does only update the hopcount if the nexthop changes too. " +"Default is \"flat\"." +msgstr "" + +msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\"" +msgstr "" + +msgid "Gateway" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "General settings" +msgstr "" + +msgid "HNA" +msgstr "" + +msgid "HNA Announcements" +msgstr "" + +msgid "HNA interval" +msgstr "" + +msgid "HNA validity time" +msgstr "" + +msgid "Hello" +msgstr "" + +msgid "Hello interval" +msgstr "" + +msgid "Hello validity time" +msgstr "" + +msgid "Hna4" +msgstr "" + +msgid "Hna6" +msgstr "" + +msgid "Hops" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "" +"Hosts in a OLSR routed network can announce connecitivity to external " +"networks using HNA messages." +msgstr "" + +msgid "" +"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more " +"robustness to the link sensing but delays neighbor registration. Defaults is " +"\"yes\"" +msgstr "" + +msgid "IP Addresses" +msgstr "" + +msgid "" +"IP-version to use. If 6and4 is selected then one olsrd instance is started " +"for each protocol." +msgstr "" + +msgid "IPv4" +msgstr "" + +msgid "IPv4 broadcast" +msgstr "" + +msgid "" +"IPv4 broadcast address for outgoing OLSR packets. One useful example would " +"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the " +"interface broadcast IP." +msgstr "" + +msgid "IPv4 source" +msgstr "" + +msgid "" +"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which " +"triggers usage of the interface IP." +msgstr "" + +msgid "IPv6" +msgstr "" + +msgid "IPv6 multicast" +msgstr "" + +msgid "" +"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal " +"multicast." +msgstr "" + +msgid "" +"IPv6 network must be given in full notation, prefix must be in CIDR notation." +msgstr "" + +msgid "IPv6 source" +msgstr "" + +msgid "" +"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches " +"the prefix of this parameter. Default is \"0::/0\", which triggers the usage " +"of a not-linklocal interface IP." +msgstr "" + +msgid "IPv6-Prefix of the uplink" +msgstr "" + +msgid "" +"If the route to the current gateway is to be changed, the ETX value of this " +"gateway is multiplied with this value before it is compared to the new one. " +"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 " +"if changed.
WARNING: This parameter should not be used together " +"with the etx_ffeth metric!
Defaults to \"1.0\"." +msgstr "" + +msgid "" +"If this Node uses NAT for connections to the internet. Default is \"yes\"." +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "" +"Interface Mode is used to prevent unnecessary packet forwarding on switched " +"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is " +"\"mesh\"." +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Interfaces Defaults" +msgstr "" + +msgid "Internet protocol" +msgstr "" + +msgid "" +"Interval to poll network interfaces for configuration changes (in seconds). " +"Default is \"2.5\"." +msgstr "" + +msgid "Known OLSR routes" +msgstr "" + +msgid "LQ" +msgstr "" + +msgid "LQ aging" +msgstr "" + +msgid "LQ algorithm" +msgstr "" + +msgid "LQ fisheye" +msgstr "" + +msgid "LQ level" +msgstr "" + +msgid "Last hop" +msgstr "" + +msgid "Legend" +msgstr "" + +msgid "Library" +msgstr "" + +msgid "Link Quality Settings" +msgstr "" + +msgid "" +"Link quality aging factor (only for lq level 2). Tuning parameter for " +"etx_float and etx_fpm, smaller values mean slower changes of ETX value. " +"(allowed values are between 0.01 and 1.0)" +msgstr "" + +msgid "" +"Link quality algorithm (only for lq level 2).
etx_float: " +"floating point ETX with exponential aging
etx_fpm : same as " +"etx_float, but with integer arithmetic
etx_ff : ETX freifunk, an " +"etx variant which use all OLSR traffic (instead of only hellos) for ETX " +"calculation
etx_ffeth: incompatible variant of etx_ff that " +"allows ethernet links with ETX 0.1.
Defaults to \"etx_ff\"" +msgstr "" + +msgid "" +"Link quality level switch between hopcount and cost-based (mostly ETX) " +"routing.
0 = do not use link quality
2 = use link " +"quality for MPR selection and routing
Default is \"2\"" +msgstr "" + +msgid "LinkQuality Multiplicator" +msgstr "" + +msgid "Links per node (average)" +msgstr "" + +msgid "Links total" +msgstr "" + +msgid "Local interface IP" +msgstr "" + +msgid "MID" +msgstr "" + +msgid "MID interval" +msgstr "" + +msgid "MID validity time" +msgstr "" + +msgid "MTU" +msgstr "" + +msgid "Main IP" +msgstr "" + +msgid "" +"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, " +"configured on port 2006 and accepts connections from \"127.0.0.1\"." +msgstr "" + +msgid "Metric" +msgstr "" + +msgid "Mode" +msgstr "" + +msgid "" +"Multiply routes with the factor given here. Allowed values are between 0.01 " +"and 1. It is only used when LQ-Level is greater than 0. Examples:
reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5
reduce LQ to all " +"nodes on this interface by 20%: default 0.8" +msgstr "" + +msgid "NAT threshold" +msgstr "" + +msgid "NLQ" +msgstr "" + +msgid "Neighbors" +msgstr "" + +msgid "Neighbour IP" +msgstr "" + +msgid "Neighbours" +msgstr "" + +msgid "Netmask" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "Network address" +msgstr "" + +msgid "Nic changes poll interval" +msgstr "" + +msgid "Nodes" +msgstr "" + +msgid "OLSR" +msgstr "" + +msgid "OLSR - Display Options" +msgstr "" + +msgid "OLSR - HNA-Announcements" +msgstr "" + +msgid "OLSR - Plugins" +msgstr "" + +msgid "OLSR Daemon" +msgstr "" + +msgid "OLSR Daemon - Interface" +msgstr "" + +msgid "OLSR connections" +msgstr "" + +msgid "OLSR gateway" +msgstr "" + +msgid "OLSR node" +msgstr "" + +msgid "Overview" +msgstr "" + +msgid "Overview of currently active OLSR host net announcements" +msgstr "" + +msgid "Overview of currently established OLSR connections" +msgstr "" + +msgid "Overview of currently known OLSR nodes" +msgstr "" + +msgid "Overview of currently known routes to other OLSR nodes" +msgstr "" + +msgid "Overview of interfaces where OLSR is running" +msgstr "" + +msgid "Overview of known multiple interface announcements" +msgstr "" + +msgid "Overview of smart gateways in this network" +msgstr "" + +msgid "Plugin configuration" +msgstr "" + +msgid "Plugins" +msgstr "" + +msgid "Polling rate for OLSR sockets in seconds. Default is 0.05." +msgstr "" + +msgid "Pollrate" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Prefix" +msgstr "" + +msgid "Resolve" +msgstr "" + +msgid "" +"Resolve hostnames on status pages. It is generally safe to allow this, but " +"if you use public IPs and have unstable DNS-Setup then those pages will load " +"really slow. In this case disable it here." +msgstr "" + +msgid "Routes" +msgstr "" + +msgid "Secondary OLSR interfaces" +msgstr "" + +msgid "" +"Sets the main IP (originator ip) of the router. This IP will NEVER change " +"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the " +"IP of the first interface." +msgstr "" + +msgid "SmartGW" +msgstr "" + +msgid "SmartGW announcements" +msgstr "" + +msgid "SmartGateway is not configured on this system." +msgstr "" + +msgid "Source address" +msgstr "" + +msgid "" +"Specifies the speed of the uplink in kilobits/s. First parameter is " +"upstream, second parameter is downstream. Default is \"128 1024\"." +msgstr "" + +msgid "Speed of the uplink" +msgstr "" + +msgid "State" +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Success rate of packages received from the neighbour" +msgstr "" + +msgid "Success rate of packages sent to the neighbour" +msgstr "" + +msgid "TC" +msgstr "" + +msgid "TC interval" +msgstr "" + +msgid "TC validity time" +msgstr "" + +msgid "TOS value" +msgstr "" + +msgid "" +"The OLSR daemon is an implementation of the Optimized Link State Routing " +"protocol. As such it allows mesh routing for any network equipment. It runs " +"on any wifi card that supports ad-hoc mode and of course on any ethernet " +"device. Visit olsrd.org for help and " +"documentation." +msgstr "" + +msgid "" +"The fixed willingness to use. If not set willingness will be calculated " +"dynamically based on battery/power status. Default is \"3\"." +msgstr "" + +msgid "The interface OLSRd should serve." +msgstr "" + +msgid "" +"The port OLSR uses. This should usually stay at the IANA assigned port 698. " +"It can have a value between 1 and 65535." +msgstr "" + +msgid "" +"This can be used to signal the external IPv6 prefix of the uplink to the " +"clients. This might allow a client to change it's local IPv6 address to use " +"the IPv6 gateway without any kind of address translation. The maximum prefix " +"length is 64 bits. Default is \"::/0\" (no prefix)." +msgstr "" + +msgid "Timing and Validity" +msgstr "" + +msgid "Topology" +msgstr "" + +msgid "" +"Type of service value for the IP header of control traffic. Default is \"16" +"\"." +msgstr "" + +msgid "Unable to connect to the OLSR daemon!" +msgstr "" + +msgid "Uplink" +msgstr "" + +msgid "Uplink uses NAT" +msgstr "" + +msgid "Use hysteresis" +msgstr "" + +msgid "Version" +msgstr "" + +msgid "WLAN" +msgstr "" + +msgid "" +"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not " +"work, please install it." +msgstr "" + +msgid "Weight" +msgstr "" + +msgid "" +"When multiple links exist between hosts the weight of interface is used to " +"determine the link to use. Normally the weight is automatically calculated " +"by olsrd based on the characteristics of the interface, but here you can " +"specify a fixed value. Olsrd will choose links with the lowest value.
Note: Interface weight is used only when LinkQualityLevel is set to " +"0. For any other value of LinkQualityLevel, the interface ETX value is used " +"instead." +msgstr "" + +msgid "" +"Which kind of uplink is exported to the other mesh nodes. An uplink is " +"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. " +"Default setting is \"both\"." +msgstr "" + +msgid "Willingness" +msgstr "" diff --git a/po/sk/openvpn.po b/po/sk/openvpn.po new file mode 100644 index 0000000000..f8755342d6 --- /dev/null +++ b/po/sk/openvpn.po @@ -0,0 +1,546 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "%s" +msgstr "" + +msgid "'net30', 'p2p', or 'subnet'" +msgstr "" + +msgid "Accept options pushed from server" +msgstr "" + +msgid "Add" +msgstr "" + +msgid "Add route after establishing connection" +msgstr "" + +msgid "Additional authentication over TLS" +msgstr "" + +msgid "Allow client-to-client traffic" +msgstr "" + +msgid "Allow multiple clients with same certificate" +msgstr "" + +msgid "Allow only one session" +msgstr "" + +msgid "Allow remote to change its IP or port" +msgstr "" + +msgid "Allowed maximum of connected clients" +msgstr "" + +msgid "Allowed maximum of internal" +msgstr "" + +msgid "Allowed maximum of new connections" +msgstr "" + +msgid "Append log to file" +msgstr "" + +msgid "Authenticate using username/password" +msgstr "" + +msgid "Automatically redirect default route" +msgstr "" + +msgid "Below is a list of configured OpenVPN instances and their current state" +msgstr "" + +msgid "Call down cmd/script before TUN/TAP close" +msgstr "" + +msgid "Certificate authority" +msgstr "" + +msgid "Change process priority" +msgstr "" + +msgid "Change to directory before initialization" +msgstr "" + +msgid "Check peer certificate against a CRL" +msgstr "" + +msgid "Chroot to directory after initialization" +msgstr "" + +msgid "Client is disabled" +msgstr "" + +msgid "Configuration category" +msgstr "" + +msgid "Configure client mode" +msgstr "" + +msgid "Configure server bridge" +msgstr "" + +msgid "Configure server mode" +msgstr "" + +msgid "Connect through Socks5 proxy" +msgstr "" + +msgid "Connect to remote host through an HTTP proxy" +msgstr "" + +msgid "Connection retry interval" +msgstr "" + +msgid "Cryptography" +msgstr "" + +msgid "Daemonize after initialization" +msgstr "" + +msgid "Delay n seconds after connection" +msgstr "" + +msgid "Delay tun/tap open and up script execution" +msgstr "" + +msgid "Diffie Hellman parameters" +msgstr "" + +msgid "Directory for custom client config files" +msgstr "" + +msgid "Disable Paging" +msgstr "" + +msgid "Disable cipher initialisation vector" +msgstr "" + +msgid "Disable options consistency check" +msgstr "" + +msgid "Disable replay protection" +msgstr "" + +msgid "Do not bind to local address and port" +msgstr "" + +msgid "Don't actually execute ifconfig" +msgstr "" + +msgid "Don't add routes automatically" +msgstr "" + +msgid "Don't cache --askpass or --auth-user-pass passwords" +msgstr "" + +msgid "Don't inherit global push options" +msgstr "" + +msgid "Don't log timestamps" +msgstr "" + +msgid "Don't re-read key on restart" +msgstr "" + +msgid "Don't require client certificate" +msgstr "" + +msgid "Don't use adaptive lzo compression" +msgstr "" + +msgid "Don't warn on ifconfig inconsistencies" +msgstr "" + +msgid "Echo parameters to log" +msgstr "" + +msgid "Empirically measure MTU" +msgstr "" + +msgid "Enable OpenSSL hardware crypto engines" +msgstr "" + +msgid "Enable Path MTU discovery" +msgstr "" + +msgid "Enable Static Key encryption mode (non-TLS)" +msgstr "" + +msgid "Enable TLS and assume client role" +msgstr "" + +msgid "Enable TLS and assume server role" +msgstr "" + +msgid "Enable internal datagram fragmentation" +msgstr "" + +msgid "Enable management interface on IP port" +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "Encryption cipher for packets" +msgstr "" + +msgid "Execute shell cmd after routes are added" +msgstr "" + +msgid "Execute shell command on remote ip change" +msgstr "" + +msgid "" +"Executed in server mode on new client connections, when the client is still " +"untrusted" +msgstr "" + +msgid "" +"Executed in server mode whenever an IPv4 address/route or MAC address is " +"added to OpenVPN's internal routing table" +msgstr "" + +msgid "Exit on TLS negotiation failure" +msgstr "" + +msgid "Get PEM password from controlling tty before we daemonize" +msgstr "" + +msgid "HMAC authentication for packets" +msgstr "" + +msgid "Handling of authentication failures" +msgstr "" + +msgid "" +"Helper directive to simplify the expression of --ping and --ping-restart in " +"server mode configurations" +msgstr "" + +msgid "If hostname resolve fails, retry" +msgstr "" + +msgid "Instance \"%s\"" +msgstr "" + +msgid "Invalid" +msgstr "" + +msgid "Keep local IP address on restart" +msgstr "" + +msgid "Keep remote IP address on restart" +msgstr "" + +msgid "Keep tun/tap device open on restart" +msgstr "" + +msgid "Key transition window" +msgstr "" + +msgid "Limit repeated log messages" +msgstr "" + +msgid "Local certificate" +msgstr "" + +msgid "Local host name or ip address" +msgstr "" + +msgid "Local private key" +msgstr "" + +msgid "Major mode" +msgstr "" + +msgid "Make tun device IPv6 capable" +msgstr "" + +msgid "Maximum number of queued TCP output packets" +msgstr "" + +msgid "Networking" +msgstr "" + +msgid "Number of allocated broadcast buffers" +msgstr "" + +msgid "Number of lines for log file history" +msgstr "" + +msgid "Only accept connections from given X509 name" +msgstr "" + +msgid "Only process ping timeouts if routes exist" +msgstr "" + +msgid "OpenVPN" +msgstr "" + +msgid "OpenVPN instances" +msgstr "" + +msgid "Optimize TUN/TAP/UDP writes" +msgstr "" + +msgid "Output to syslog and do not daemonize" +msgstr "" + +msgid "Overview" +msgstr "" + +msgid "PKCS#12 file containing keys" +msgstr "" + +msgid "Pass environment variables to script" +msgstr "" + +msgid "Persist replay-protection state" +msgstr "" + +msgid "Persist/unpersist ifconfig-pool" +msgstr "" + +msgid "Ping remote every n seconds over TCP/UDP port" +msgstr "" + +msgid "Policy level over usage of external programs and scripts" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "Proxy timeout in seconds" +msgstr "" + +msgid "Push an ifconfig option to remote" +msgstr "" + +msgid "Push options to peer" +msgstr "" + +msgid "Query management channel for private key" +msgstr "" + +msgid "Randomly choose remote server" +msgstr "" + +msgid "Refuse connection if no custom client config" +msgstr "" + +msgid "Remap SIGUSR1 signals" +msgstr "" + +msgid "Remote host name or ip address" +msgstr "" + +msgid "Remote ping timeout" +msgstr "" + +msgid "Renegotiate data chan. key after bytes" +msgstr "" + +msgid "Renegotiate data chan. key after packets" +msgstr "" + +msgid "Renegotiate data chan. key after seconds" +msgstr "" + +msgid "Replay protection sliding window size" +msgstr "" + +msgid "Require explicit designation on certificate" +msgstr "" + +msgid "Require explicit key usage on certificate" +msgstr "" + +msgid "Restart after remote ping timeout" +msgstr "" + +msgid "Retransmit timeout on TLS control channel" +msgstr "" + +msgid "Retry indefinitely on HTTP proxy errors" +msgstr "" + +msgid "Retry indefinitely on Socks proxy errors" +msgstr "" + +msgid "Route subnet to client" +msgstr "" + +msgid "Run as an inetd or xinetd server" +msgstr "" + +msgid "Run script cmd on client connection" +msgstr "" + +msgid "Run script cmd on client disconnection" +msgstr "" + +msgid "Run up/down scripts for all restarts" +msgstr "" + +msgid "Send notification to peer on disconnect" +msgstr "" + +msgid "Service" +msgstr "" + +msgid "Set GID to group" +msgstr "" + +msgid "Set TCP/UDP MTU" +msgstr "" + +msgid "Set UID to user" +msgstr "" + +msgid "Set aside a pool of subnets" +msgstr "" + +msgid "Set extended HTTP proxy options" +msgstr "" + +msgid "Set output verbosity" +msgstr "" + +msgid "Set size of real and virtual address hash tables" +msgstr "" + +msgid "Set the TCP/UDP receive buffer size" +msgstr "" + +msgid "Set the TCP/UDP send buffer size" +msgstr "" + +msgid "Set tun/tap TX queue length" +msgstr "" + +msgid "Set tun/tap adapter parameters" +msgstr "" + +msgid "Set tun/tap device MTU" +msgstr "" + +msgid "Set tun/tap device overhead" +msgstr "" + +msgid "Set upper bound on TCP MSS" +msgstr "" + +msgid "Shaping for peer bandwidth" +msgstr "" + +msgid "Shell cmd to execute after tun device open" +msgstr "" + +msgid "Shell cmd to run after tun device close" +msgstr "" + +msgid "Shell command to verify X509 name" +msgstr "" + +msgid "Silence the output of replay warnings" +msgstr "" + +msgid "Size of cipher key" +msgstr "" + +msgid "Specify a default gateway for routes" +msgstr "" + +msgid "Start OpenVPN in a hibernating state" +msgstr "" + +msgid "Start/Stop" +msgstr "" + +msgid "Started" +msgstr "" + +msgid "Status file format version" +msgstr "" + +msgid "Switch to advanced configuration »" +msgstr "" + +msgid "TCP/UDP port # for both local and remote" +msgstr "" + +msgid "TCP/UDP port # for local (default=1194)" +msgstr "" + +msgid "TCP/UDP port # for remote (default=1194)" +msgstr "" + +msgid "TLS cipher" +msgstr "" + +msgid "TOS passthrough (applies to IPv4 only)" +msgstr "" + +msgid "Temporary directory for client-connect return file" +msgstr "" + +msgid "Timeframe for key exchange" +msgstr "" + +msgid "Type of used device" +msgstr "" + +msgid "Use fast LZO compression" +msgstr "" + +msgid "Use individual addresses rather than /30 subnets" +msgstr "" + +msgid "Use protocol" +msgstr "" + +msgid "Use tun/tap device node" +msgstr "" + +msgid "Use username as common name" +msgstr "" + +msgid "VPN" +msgstr "" + +msgid "Write log to file" +msgstr "" + +msgid "Write process ID to file" +msgstr "" + +msgid "Write status to file every n seconds" +msgstr "" + +msgid "no" +msgstr "" + +msgid "tun/tap device" +msgstr "" + +msgid "tun/tap inactivity timeout" +msgstr "" + +msgid "yes (%i)" +msgstr "" + +msgid "« Switch to basic configuration" +msgstr "" diff --git a/po/sk/p2pblock.po b/po/sk/p2pblock.po new file mode 100644 index 0000000000..1881b3cebd --- /dev/null +++ b/po/sk/p2pblock.po @@ -0,0 +1,38 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Block Time" +msgstr "" + +msgid "Enable P2P-Block" +msgstr "" + +msgid "IP-P2P" +msgstr "" + +msgid "Layer7-Protocols" +msgstr "" + +msgid "P2P-Block" +msgstr "" + +msgid "" +"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols " +"for non-whitelisted clients." +msgstr "" + +msgid "Portrange" +msgstr "" + +msgid "Whitelisted IPs" +msgstr "" + +msgid "seconds" +msgstr "" diff --git a/po/sk/p910nd.po b/po/sk/p910nd.po new file mode 100644 index 0000000000..2d24a13957 --- /dev/null +++ b/po/sk/p910nd.po @@ -0,0 +1,35 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Bidirectional mode" +msgstr "" + +msgid "Device" +msgstr "" + +msgid "" +"First you have to install the packages to get support for USB (kmod-usb-" +"printer) or parallel port (kmod-lp)." +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Settings" +msgstr "" + +msgid "TCP listener port." +msgstr "" + +msgid "enable" +msgstr "" + +msgid "p910nd - Printer server" +msgstr "" diff --git a/po/sk/pbx-voicemail.po b/po/sk/pbx-voicemail.po new file mode 100644 index 0000000000..c3a5c5ff92 --- /dev/null +++ b/po/sk/pbx-voicemail.po @@ -0,0 +1,88 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Email Addresses that Receive Voicemail" +msgstr "" + +msgid "Enable Voicemail" +msgstr "" + +msgid "Global Voicemail Setup" +msgstr "" + +msgid "" +"Here you can configure a global voicemail for this PBX. Since this system is " +"intended to run on embedded systems like routers, there is no local storage " +"of voicemail - it must be sent out by email. Therefore you need to configure " +"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's " +"SMTP server), and provide a list of addresses that receive recorded " +"voicemail." +msgstr "" + +msgid "" +"In order for this PBX to send emails containing voicemail recordings, you " +"need to set up an SMTP server here. Your ISP usually provides an SMTP server " +"for that purpose. You can also set up a third party SMTP server such as the " +"one provided by Google or Yahoo." +msgstr "" + +msgid "Last Sent Voicemail Log" +msgstr "" + +msgid "Local Storage Directory" +msgstr "" + +msgid "No" +msgstr "" + +msgid "Outgoing mail (SMTP) Server" +msgstr "" + +msgid "SMTP Password" +msgstr "" + +msgid "SMTP Port Number" +msgstr "" + +msgid "SMTP Server Authentication" +msgstr "" + +msgid "SMTP Server Hostname or IP Address" +msgstr "" + +msgid "SMTP User Name" +msgstr "" + +msgid "Secure Connection Using TLS" +msgstr "" + +msgid "Voicemail Setup" +msgstr "" + +msgid "" +"When you enable voicemail, you will have the opportunity to specify email " +"addresses that receive recorded voicemail. You must also set up an SMTP " +"server below." +msgstr "" + +msgid "Yes" +msgstr "" + +msgid "" +"You can also retain copies of voicemail messages on the device running your " +"PBX. The path specified here will be created if it doesn't exist. Beware of " +"limited space on embedded devices like routers, and enable this option only " +"if you know what you are doing." +msgstr "" + +msgid "" +"Your real SMTP password is not shown for your protection. It will be changed " +"only when you change the value in this box." +msgstr "" diff --git a/po/sk/pbx.po b/po/sk/pbx.po new file mode 100644 index 0000000000..0d256e2cd0 --- /dev/null +++ b/po/sk/pbx.po @@ -0,0 +1,449 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Advanced Settings" +msgstr "" + +msgid "Available" +msgstr "" + +msgid "" +"Avoid using anything but alpha-numeric characters, space, comma, and period." +msgstr "" + +msgid "Away" +msgstr "" + +msgid "Blacklisted Numbers" +msgstr "" + +msgid "Call Routing" +msgstr "" + +msgid "Call-through Numbers" +msgstr "" + +msgid "Copy-paste large lists of numbers here." +msgstr "" + +msgid "" +"Designate numbers that are allowed to call through this system and which " +"user's privileges it will have." +msgstr "" + +msgid "Dials numbers unmatched elsewhere" +msgstr "" + +msgid "Do Not Disturb" +msgstr "" + +msgid "Domain/IP Address/Dynamic Domain" +msgstr "" + +msgid "Dynamic List of Blacklisted Numbers" +msgstr "" + +msgid "Email" +msgstr "" + +msgid "Enable Incoming Calls (Register via SIP)" +msgstr "" + +msgid "Enable Incoming Calls (set Status below)" +msgstr "" + +msgid "Enable Outgoing Calls" +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "" +"Enter phone numbers that you want to decline calls from automatically. You " +"should probably omit the country code and any leading zeroes, but please " +"experiment to make sure you are blocking numbers from your desired area " +"successfully." +msgstr "" + +msgid "" +"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices " +"you will use ONLY locally and never from a remote location." +msgstr "" + +msgid "" +"Enter this hostname (or hostname:port) in the Server/Registrar setting of " +"SIP devices you will use from a remote location (they will work locally too)." +msgstr "" + +msgid "External SIP Port" +msgstr "" + +msgid "" +"For each provider enabled for incoming calls, here you can restrict which " +"users to ring on incoming calls. If the list is empty, the system will " +"indicate that all users enabled for incoming calls will ring. Invalid " +"usernames will be rejected silently. Also, entering a username here " +"overrides the user's setting to not receive incoming calls. This way, you " +"can make certain users ring only for specific providers. Entries can be made " +"in a space-separated list, and/or one per line by hitting enter after every " +"one." +msgstr "" + +msgid "" +"For each user enabled for outgoing calls you can restrict what providers the " +"user can use for outgoing calls. By default all users can use all providers. " +"To show up in the list below the user should be allowed to make outgoing " +"calls in the \"User Accounts\" page. Enter VoIP providers in the format " +"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest " +"to copy and paste the providers from above. Invalid entries, including " +"providers not enabled for outgoing calls, will be rejected silently. Entries " +"can be made in a space-separated list, and/or one per line by hitting enter " +"after every one." +msgstr "" + +msgid "Full Name" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "Google Accounts" +msgstr "" + +msgid "Google Talk Status" +msgstr "" + +msgid "Google Talk Status Message" +msgstr "" + +msgid "Google Voice/Talk Accounts" +msgstr "" + +msgid "" +"Here you must configure at least one SIP account, that you will use to " +"register with this service. Use this account either in an Analog Telephony " +"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid " +"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By " +"default, all SIP accounts will ring simultaneously if a call is made to one " +"of your VoIP provider accounts or GV numbers." +msgstr "" + +msgid "" +"If setting Server/Registrar to %s or %s does not work for you, try setting " +"it to %s or %s and entering this port number in a separate field that " +"specifies the Server/Registrar port number. Beware that some devices have a " +"confusing setting that sets the port where SIP requests originate from on " +"the SIP device itself (the bind port). The port specified on this page is " +"NOT this bind port but the port this service listens on." +msgstr "" + +msgid "" +"If you experience jittery or high latency audio during heavy downloads, you " +"may want to enable QoS. QoS prioritizes traffic to and from your network for " +"specified ports and IP addresses, resulting in better latency and throughput " +"for sound in our case. If enabled below, a QoS rule for this service will be " +"configured by the PBX automatically, but you must visit the QoS " +"configuration page (Network->QoS) to configure other critical QoS settings " +"like Download and Upload speed." +msgstr "" + +msgid "" +"If you have more than one account that can make outgoing calls, you should " +"enter a list of phone numbers and/or prefixes in the following fields for " +"each provider listed. Invalid prefixes are removed silently, and only 0-9, " +"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z " +"matches 1-9, and N matches 2-9. For example to make calls to Germany through " +"a provider, you can enter 49. To make calls to North America, you can enter " +"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area " +"code like New York's 646, you can enter 646NXXXXXX for that provider. You " +"should leave one account with an empty list to make calls with it by " +"default, if no other provider's prefixes match. The system will " +"automatically replace an empty list with a message that the provider dials " +"all numbers not matched by another provider's prefixes. Be as specific as " +"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international " +"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a " +"space-separated list, and/or one per line by hitting enter after every one." +msgstr "" + +msgid "Incoming Calls" +msgstr "" + +msgid "Insert QoS Rules" +msgstr "" + +msgid "Makes Outgoing Calls" +msgstr "" + +msgid "NOTE: There are no Google or SIP provider accounts configured." +msgstr "" + +msgid "" +"NOTE: There are no Google or SIP provider accounts enabled for incoming " +"calls." +msgstr "" + +msgid "" +"NOTE: There are no Google or SIP provider accounts enabled for outgoing " +"calls." +msgstr "" + +msgid "NOTE: There are no local user accounts configured." +msgstr "" + +msgid "NOTE: There are no local user accounts enabled for outgoing calls." +msgstr "" + +msgid "No" +msgstr "" + +msgid "Number of Seconds to Ring" +msgstr "" + +msgid "Outbound Proxy" +msgstr "" + +msgid "Outgoing Calls" +msgstr "" + +msgid "PBX Main Page" +msgstr "" + +msgid "PBX Service Status" +msgstr "" + +msgid "PIN" +msgstr "" + +msgid "Password" +msgstr "" + +msgid "" +"Pick a random port number between 6500 and 9500 for the service to listen " +"on. Do not pick the standard 5060, because it is often subject to brute-" +"force attacks. When finished, (1) click \"Save and Apply\", and (2) click " +"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP " +"Device/Softphone Accounts\" section for updated Server and Port settings for " +"your SIP Devices/Softphones." +msgstr "" + +msgid "Port Setting for SIP Devices" +msgstr "" + +msgid "Providers Used for Outgoing Calls" +msgstr "" + +msgid "QoS Settings" +msgstr "" + +msgid "RTP Port Range End" +msgstr "" + +msgid "RTP Port Range Start" +msgstr "" + +msgid "" +"RTP traffic carries actual voice packets. This is the start of the port " +"range that will be used for setting up RTP communication. It's usually OK to " +"leave this at the default value." +msgstr "" + +msgid "Receives Incoming Calls" +msgstr "" + +msgid "Remote Usage" +msgstr "" + +msgid "Rings users enabled for incoming calls" +msgstr "" + +msgid "SIP Accounts" +msgstr "" + +msgid "SIP Device/Softphone Accounts" +msgstr "" + +msgid "SIP Provider Accounts" +msgstr "" + +msgid "SIP Realm (needed by some providers)" +msgstr "" + +msgid "SIP Server/Registrar" +msgstr "" + +msgid "SIP Server/Registrar Port" +msgstr "" + +msgid "Server Setting" +msgstr "" + +msgid "Server Setting for Local SIP Devices" +msgstr "" + +msgid "Server Setting for Remote SIP Devices" +msgstr "" + +msgid "Service Status" +msgstr "" + +msgid "" +"Set the number of seconds to ring users upon incoming calls before hanging " +"up or going to voicemail, if the voicemail is installed and enabled." +msgstr "" + +msgid "Space-Separated List of Blacklisted Numbers" +msgstr "" + +msgid "Specify numbers individually here. Press enter to add more numbers." +msgstr "" + +msgid "" +"The number(s) specified above will be able to dial out with this user's " +"providers. Invalid usernames, including users not enabled for outgoing " +"calls, are dropped silently. Please verify that the entry was accepted." +msgstr "" + +msgid "" +"This configuration page allows you to configure a phone system (PBX) service " +"which permits making phone calls through multiple Google and SIP (like " +"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP " +"devices. Note that Google accounts, SIP accounts, and local user accounts " +"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User " +"Accounts\" sub-sections. You must add at least one User Account to this PBX, " +"and then configure a SIP device or softphone to use the account, in order to " +"make and receive calls with your Google/SIP accounts. Configuring multiple " +"users will allow you to make free calls between all users, and share the " +"configured Google and SIP accounts. If you have more than one Google and SIP " +"accounts set up, you should probably configure how calls to and from them " +"are routed in the \"Call Routing\" page. If you're interested in using your " +"own PBX from anywhere in the world, then visit the \"Remote Usage\" section " +"in the \"Advanced Settings\" page." +msgstr "" + +msgid "" +"This is the name that the VoIP server will use to identify itself when " +"registering to VoIP (SIP) providers. Some providers require this to a " +"specific string matching a hardware SIP device." +msgstr "" + +msgid "" +"This is where you indicate which Google/SIP accounts are used to call what " +"country/area codes, which users can use what SIP/Google accounts, how " +"incoming calls are routed, what numbers can get into this PBX with a " +"password, and what numbers are blacklisted." +msgstr "" + +msgid "" +"This is where you set up your Google (Talk and Voice) Accounts, in order to " +"start using them for dialing and receiving calls (voice chat and real phone " +"calls). Please make at least one voice call using the Google Talk plugin " +"installable through the GMail interface, and then log out from your account " +"everywhere. Click \"Add\" to add as many accounts as you wish." +msgstr "" + +msgid "" +"This is where you set up your SIP (VoIP) accounts ts like Sipgate, " +"SipSorcery, the popular Betamax providers, and any other providers with SIP " +"settings in order to start using them for dialing and receiving calls (SIP " +"uri and real phone calls). Click \"Add\" to add as many accounts as you wish." +msgstr "" + +msgid "" +"This option should be set to \"Yes\" if you have a DID (real telephone " +"number) associated with this SIP account or want to receive SIP uri calls " +"through this provider." +msgstr "" + +msgid "" +"This section contains settings that do not need to be changed under normal " +"circumstances. In addition, here you can configure your system for use with " +"remote SIP devices, and resolve call quality issues by enabling the " +"insertion of QoS rules." +msgstr "" + +msgid "" +"Use (four to five digit) numeric user name if you are connecting normal " +"telephones with ATAs to this system (so they can dial user names)." +msgstr "" + +msgid "" +"Use this account to make outgoing calls as configured in the \"Call Routing" +"\" section." +msgstr "" + +msgid "Use this account to make outgoing calls." +msgstr "" + +msgid "User Accounts" +msgstr "" + +msgid "User Agent String" +msgstr "" + +msgid "User Name" +msgstr "" + +msgid "Uses providers enabled for outgoing calls" +msgstr "" + +msgid "" +"When somebody starts voice chat with your GTalk account or calls the GVoice, " +"number (if you have Google Voice), the call will be forwarded to any users " +"that are online (registered using a SIP device or softphone) and permitted " +"to receive the call. If you have Google Voice, you must go to your GVoice " +"settings and forward calls to Google chat in order to actually receive calls " +"made to your GVoice number. If you have trouble receiving calls from GVoice, " +"experiment with the Call Screening option in your GVoice Settings. Finally, " +"make sure no other client is online with this account (browser in gmail, " +"mobile/desktop Google Talk App) as it may interfere." +msgstr "" + +msgid "" +"When your password is saved, it disappears from this field and is not " +"displayed for your protection. The previously saved password will be changed " +"only when you enter a value different from the saved one." +msgstr "" + +msgid "Yes" +msgstr "" + +msgid "" +"You can enter your domain name, external IP address, or dynamic domain name " +"here Please keep in mind that if your IP address is dynamic and it changes " +"your configuration will become invalid. Hence, it's recommended to set up " +"Dynamic DNS in this case." +msgstr "" + +msgid "You can specify a real name to show up in the Caller ID here." +msgstr "" + +msgid "" +"You can use your SIP devices/softphones with this system from a remote " +"location as well, as long as your Internet Service Provider gives you a " +"public IP. You will be able to call other local users for free (e.g. other " +"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls " +"as if you were local to the PBX. After configuring this tab, go back to " +"where users are configured and see the new Server and Port setting you need " +"to configure the remote SIP devices with. Please note that if this PBX is " +"not running on your router/gateway, you will need to configure port " +"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP " +"port and RTP range) to the IP address of the device running this PBX." +msgstr "" + +msgid "" +"Your PIN disappears when saved for your protection. It will be changed only " +"when you enter a value different from the saved one. Leaving the PIN empty " +"is possible, but please beware of the security implications." +msgstr "" + +msgid "" +"Your password disappears when saved for your protection. It will be changed " +"only when you enter a value different from the saved one." +msgstr "" diff --git a/po/sk/polipo.po b/po/sk/polipo.po new file mode 100644 index 0000000000..e003c175a9 --- /dev/null +++ b/po/sk/polipo.po @@ -0,0 +1,202 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Advanced Settings" +msgstr "" + +msgid "Allowed clients" +msgstr "" + +msgid "Always use system DNS resolver" +msgstr "" + +msgid "" +"Basic HTTP authentication supported. Provide username and password in " +"username:password format." +msgstr "" + +msgid "Configuration" +msgstr "" + +msgid "DNS and Query Settings" +msgstr "" + +msgid "DNS server address" +msgstr "" + +msgid "Delete cache files time" +msgstr "" + +msgid "Disk cache location" +msgstr "" + +msgid "Do not query IPv6" +msgstr "" + +msgid "Enable if cache (proxy) is shared by multiple users." +msgstr "" + +msgid "First PMM segment size (in bytes)" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "How much RAM should Polipo use for its cache." +msgstr "" + +msgid "In RAM cache size (in bytes)" +msgstr "" + +msgid "Listen address" +msgstr "" + +msgid "Listen port" +msgstr "" + +msgid "" +"Location where polipo will cache files permanently. Use of external storage " +"devices is recommended, because the cache can grow considerably. Leave it " +"empty to disable on-disk cache." +msgstr "" + +msgid "Log file location" +msgstr "" + +msgid "Log to syslog" +msgstr "" + +msgid "Logging and RAM" +msgstr "" + +msgid "Never use system DNS resolver" +msgstr "" + +msgid "On-Disk Cache" +msgstr "" + +msgid "PMM segments size (in bytes)" +msgstr "" + +msgid "Parent Proxy" +msgstr "" + +msgid "Parent proxy address" +msgstr "" + +msgid "" +"Parent proxy address (in host:port format), to which Polipo will forward the " +"requests." +msgstr "" + +msgid "Parent proxy authentication" +msgstr "" + +msgid "Polipo" +msgstr "" + +msgid "Polipo Status" +msgstr "" + +msgid "Polipo is a small and fast caching web proxy." +msgstr "" + +msgid "Poor Man's Multiplexing" +msgstr "" + +msgid "" +"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by " +"requesting an instance in multiple segments. It tries to lower the latency " +"caused by the weakness of HTTP protocol. NOTE: some sites may not work with " +"PMM enabled." +msgstr "" + +msgid "Port on which Polipo will listen" +msgstr "" + +msgid "Proxy" +msgstr "" + +msgid "Query DNS by hostname" +msgstr "" + +msgid "Query DNS directly, fallback to system resolver" +msgstr "" + +msgid "Query DNS directly, for unknown hosts fall back to system resolver" +msgstr "" + +msgid "Query DNS for IPv6" +msgstr "" + +msgid "Query IPv4 and IPv6, prefer IPv4" +msgstr "" + +msgid "Query IPv4 and IPv6, prefer IPv6" +msgstr "" + +msgid "Query only IPv6" +msgstr "" + +msgid "" +"Set the DNS server address to use, if you want Polipo to use different DNS " +"server than the host system." +msgstr "" + +msgid "Shared cache" +msgstr "" + +msgid "" +"Size of the first PMM segment. If not defined, it defaults to twice the PMM " +"segment size." +msgstr "" + +msgid "Size to which cached files should be truncated" +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Syslog facility" +msgstr "" + +msgid "" +"The interface on which Polipo will listen. To listen on all interfaces use " +"0.0.0.0 or :: (IPv6)." +msgstr "" + +msgid "Time after which cached files will be deleted" +msgstr "" + +msgid "Time after which cached files will be truncated" +msgstr "" + +msgid "To enable PMM, PMM segment size must be set to some positive value." +msgstr "" + +msgid "Truncate cache files size (in bytes)" +msgstr "" + +msgid "Truncate cache files time" +msgstr "" + +msgid "" +"Use of external storage device is recommended, because the log file is " +"written frequently and can grow considerably." +msgstr "" + +msgid "" +"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients " +"that are allowed to connect. The format is IP address or network address " +"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))" +msgstr "" + +msgid "enable" +msgstr "" diff --git a/po/sk/qos.po b/po/sk/qos.po new file mode 100644 index 0000000000..cc0c2509ef --- /dev/null +++ b/po/sk/qos.po @@ -0,0 +1,98 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Calculate overhead" +msgstr "" + +msgid "Classification Rules" +msgstr "" + +msgid "Classification group" +msgstr "" + +msgid "Destination host" +msgstr "" + +msgid "Downlink" +msgstr "" + +msgid "Download speed (kbit/s)" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Half-duplex" +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Internet Connection" +msgstr "" + +msgid "Number of bytes" +msgstr "" + +msgid "Ports" +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "QoS" +msgstr "" + +msgid "Quality of Service" +msgstr "" + +msgid "Service" +msgstr "" + +msgid "Source host" +msgstr "" + +msgid "Target" +msgstr "" + +msgid "Uplink" +msgstr "" + +msgid "Upload speed (kbit/s)" +msgstr "" + +msgid "" +"With QoS you can prioritize " +"network traffic selected by addresses, ports or services." +msgstr "" + +msgid "all" +msgstr "" + +msgid "allf" +msgstr "" + +msgid "default" +msgstr "" + +msgid "express" +msgstr "" + +msgid "low" +msgstr "" + +msgid "normal" +msgstr "" + +msgid "priority" +msgstr "" + +msgid "qos_connbytes" +msgstr "" diff --git a/po/sk/radvd.po b/po/sk/radvd.po new file mode 100644 index 0000000000..9bd26fa345 --- /dev/null +++ b/po/sk/radvd.po @@ -0,0 +1,367 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "6to4 interface" +msgstr "" + +msgid "Address" +msgstr "" + +msgid "Addresses" +msgstr "" + +msgid "Advanced" +msgstr "" + +msgid "Advertise Home Agent flag" +msgstr "" + +msgid "Advertise router address" +msgstr "" + +msgid "Advertised Domain Suffixes" +msgstr "" + +msgid "" +"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface " +"is used" +msgstr "" + +msgid "Advertised IPv6 prefixes" +msgstr "" + +msgid "" +"Advertised IPv6 prefixes. If empty, the current interface prefix is used" +msgstr "" + +msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)" +msgstr "" + +msgid "Advertises Mobile Router registration capability (NEMO Basic)" +msgstr "" + +msgid "" +"Advertises assumed reachability time in milliseconds of neighbours in the RA " +"if specified. 0 disables reachability advertisements" +msgstr "" + +msgid "" +"Advertises the default Hop Count value for outgoing unicast packets in the " +"RA. 0 disables hopcount advertisements" +msgstr "" + +msgid "Advertises the default router preference" +msgstr "" + +msgid "" +"Advertises the given link MTU in the RA if specified. 0 disables MTU " +"advertisements" +msgstr "" + +msgid "" +"Advertises the length of time in seconds that addresses generated from the " +"prefix via stateless address autoconfiguration remain preferred." +msgstr "" + +msgid "" +"Advertises the length of time in seconds that the prefix is valid for the " +"purpose of on-link determination." +msgstr "" + +msgid "" +"Advertises the lifetime of the default router in seconds. 0 indicates that " +"the node is no default router" +msgstr "" + +msgid "" +"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent " +"services" +msgstr "" + +msgid "" +"Advertises wait time in milliseconds between Neighbor Solicitation messages " +"in the RA if specified. 0 disables retransmit advertisements" +msgstr "" + +msgid "Advertising" +msgstr "" + +msgid "Autonomous" +msgstr "" + +msgid "Clients" +msgstr "" + +msgid "Configuration flag" +msgstr "" + +msgid "Current hop limit" +msgstr "" + +msgid "DNSSL" +msgstr "" + +msgid "DNSSL Configuration" +msgstr "" + +msgid "Default lifetime" +msgstr "" + +msgid "Default preference" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Enable advertisements" +msgstr "" + +msgid "Enables router advertisements and solicitations" +msgstr "" + +msgid "" +"Enables the additional stateful administered autoconfiguration protocol " +"(RFC2462)" +msgstr "" + +msgid "" +"Enables the autoconfiguration of additional, non address information " +"(RFC2462)" +msgstr "" + +msgid "General" +msgstr "" + +msgid "Home Agent information" +msgstr "" + +msgid "Home Agent lifetime" +msgstr "" + +msgid "Home Agent preference" +msgstr "" + +msgid "Include Home Agent Information in the RA" +msgstr "" + +msgid "Include Mobile IPv6 Advertisement Interval option to RA" +msgstr "" + +msgid "Includes the link-layer address of the outgoing interface in the RA" +msgstr "" + +msgid "" +"Indicates that the address of interface is sent instead of network prefix, " +"as is required by Mobile IPv6" +msgstr "" + +msgid "" +"Indicates that the underlying link is not broadcast capable, prevents " +"unsolicited advertisements from being sent" +msgstr "" + +msgid "" +"Indicates that this prefix can be used for autonomous address configuration " +"(RFC4862)" +msgstr "" + +msgid "" +"Indicates that this prefix can be used for on-link determination (RFC4861)" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Interface Configuration" +msgstr "" + +msgid "Interface required" +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Lifetime" +msgstr "" + +msgid "Link MTU" +msgstr "" + +msgid "Managed flag" +msgstr "" + +msgid "Max. interval" +msgstr "" + +msgid "Maximum advertisement interval" +msgstr "" + +msgid "Minimum advertisement delay" +msgstr "" + +msgid "Minimum advertisement interval" +msgstr "" + +msgid "Mobile IPv6" +msgstr "" + +msgid "Mobile IPv6 interval option" +msgstr "" + +msgid "Mobile IPv6 router registration" +msgstr "" + +msgid "Multicast" +msgstr "" + +msgid "On-link" +msgstr "" + +msgid "On-link determination" +msgstr "" + +msgid "Preference" +msgstr "" + +msgid "Preferred lifetime" +msgstr "" + +msgid "Prefix" +msgstr "" + +msgid "Prefix Configuration" +msgstr "" + +msgid "Prefixes" +msgstr "" + +msgid "RDNSS" +msgstr "" + +msgid "RDNSS Configuration" +msgstr "" + +msgid "Radvd" +msgstr "" + +msgid "Radvd - DNSSL" +msgstr "" + +msgid "Radvd - Interface %q" +msgstr "" + +msgid "Radvd - Prefix" +msgstr "" + +msgid "Radvd - RDNSS" +msgstr "" + +msgid "Radvd - Route" +msgstr "" + +msgid "" +"Radvd is a router advertisement daemon for IPv6. It listens to router " +"solicitations and sends router advertisements as described in RFC 4861." +msgstr "" + +msgid "Reachable time" +msgstr "" + +msgid "" +"Restrict communication to specified clients, leave empty to use multicast" +msgstr "" + +msgid "Retransmit timer" +msgstr "" + +msgid "Route Configuration" +msgstr "" + +msgid "Routes" +msgstr "" + +msgid "Source link-layer address" +msgstr "" + +msgid "" +"Specifies a logical interface name to derive a 6to4 prefix from. The " +"interfaces public IPv4 address is combined with 2002::/3 and the value of " +"the prefix option" +msgstr "" + +msgid "Specifies the lifetime associated with the route in seconds." +msgstr "" + +msgid "Specifies the logical interface name this section belongs to" +msgstr "" + +msgid "" +"Specifies the maximum duration how long the DNSSL entries are used for name " +"resolution." +msgstr "" + +msgid "" +"Specifies the maximum duration how long the RDNSS entries are used for name " +"resolution." +msgstr "" + +msgid "Specifies the preference associated with the default router" +msgstr "" + +msgid "Suffix" +msgstr "" + +msgid "" +"The maximum time allowed between sending unsolicited multicast router " +"advertisements from the interface, in seconds" +msgstr "" + +msgid "" +"The minimum time allowed between sending multicast router advertisements " +"from the interface, in seconds" +msgstr "" + +msgid "" +"The minimum time allowed between sending unsolicited multicast router " +"advertisements from the interface, in seconds" +msgstr "" + +msgid "The preference for the Home Agent sending this RA" +msgstr "" + +msgid "Timing" +msgstr "" + +msgid "Unicast only" +msgstr "" + +msgid "Valid lifetime" +msgstr "" + +msgid "Validity time" +msgstr "" + +msgid "default" +msgstr "" + +msgid "high" +msgstr "" + +msgid "low" +msgstr "" + +msgid "medium" +msgstr "" + +msgid "no" +msgstr "" + +msgid "yes" +msgstr "" diff --git a/po/sk/rrdtool.po b/po/sk/rrdtool.po new file mode 100644 index 0000000000..fd3781f5f3 --- /dev/null +++ b/po/sk/rrdtool.po @@ -0,0 +1,356 @@ +# rrdtool.pot +# generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua +msgid "" +msgstr "" +"Content-Type: text/plain; charset=ASCII\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +#. %H: Wireless - Signal Noise Ratio +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1 +msgid "stat_dg_title_wireless__signal_noise" +msgstr "" + +#. dBm +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2 +msgid "stat_dg_label_wireless__signal_noise" +msgstr "" + +#. Noise Level +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3 +msgid "stat_ds_signal_noise" +msgstr "" + +#. Signal Strength +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4 +msgid "stat_ds_signal_power" +msgstr "" + +#. %H: Wireless - Signal Quality +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5 +msgid "stat_dg_title_wireless__signal_quality" +msgstr "" + +#. n +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6 +msgid "stat_dg_label_wireless__signal_quality" +msgstr "" + +#. Signal Quality +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7 +msgid "stat_ds_signal_quality" +msgstr "" + +#. %H: ICMP Roundtrip Times +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8 +msgid "stat_dg_title_ping" +msgstr "" + +#. ms +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9 +msgid "stat_dg_label_ping" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10 +msgid "stat_ds_ping" +msgstr "" + +#. %H: Firewall - Processed Packets +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11 +msgid "stat_dg_title_iptables__ipt_packets" +msgstr "" + +#. Packets/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12 +msgid "stat_dg_label_iptables__ipt_packets" +msgstr "" + +#. Chain \"%di\" +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13 +msgid "stat_ds_ipt_packets" +msgstr "" + +#. %H: Netlink - Transfer on %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14 +msgid "stat_dg_title_netlink__if_octets" +msgstr "" + +#. Bytes/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15 +msgid "stat_dg_label_netlink__if_octets" +msgstr "" + +#. Bytes (%ds) +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16 +msgid "stat_ds_if_octets" +msgstr "" + +#. %H: Netlink - Packets on %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17 +msgid "stat_dg_title_netlink__if_packets" +msgstr "" + +#. Packets/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18 +msgid "stat_dg_label_netlink__if_packets" +msgstr "" + +#. Processed (%ds) +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19 +msgid "stat_ds_if_packets" +msgstr "" + +#. Dropped (%ds) +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20 +msgid "stat_ds_if_dropped" +msgstr "" + +#. Errors (%ds) +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21 +msgid "stat_ds_if_errors" +msgstr "" + +#. %H: Netlink - Multicast on %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22 +msgid "stat_dg_title_netlink__if_multicast" +msgstr "" + +#. Packets/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23 +msgid "stat_dg_label_netlink__if_multicast" +msgstr "" + +#. Packets +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24 +msgid "stat_ds_if_multicast" +msgstr "" + +#. %H: Netlink - Collisions on %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25 +msgid "stat_dg_title_netlink__if_collisions" +msgstr "" + +#. Collisions/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26 +msgid "stat_dg_label_netlink__if_collisions" +msgstr "" + +#. Collisions +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27 +msgid "stat_ds_if_collisions" +msgstr "" + +#. %H: Netlink - Errors on %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28 +msgid "stat_dg_title_netlink__if_tx_errors" +msgstr "" + +#. Errors/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29 +msgid "stat_dg_label_netlink__if_tx_errors" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30 +msgid "stat_ds_if_tx_errors" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31 +msgid "stat_ds_if_rx_errors" +msgstr "" + +#. %H: Processes +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32 +msgid "stat_dg_title_processes" +msgstr "" + +#. Processes/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33 +msgid "stat_dg_label_processes" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34 +msgid "stat_ds_ps_state" +msgstr "" + +#. %H: Process %pi - used cpu time +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35 +msgid "stat_dg_title_processes__ps_cputime" +msgstr "" + +#. Jiffies +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36 +msgid "stat_dg_label_processes__ps_cputime" +msgstr "" + +#. system +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37 +msgid "stat_ds_ps_cputime__syst" +msgstr "" + +#. user +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38 +msgid "stat_ds_ps_cputime__user" +msgstr "" + +#. %H: Process %pi - threads and processes +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39 +msgid "stat_dg_title_processes__ps_count" +msgstr "" + +#. Count +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40 +msgid "stat_dg_label_processes__ps_count" +msgstr "" + +#. %ds +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41 +msgid "stat_ds_ps_count" +msgstr "" + +#. %H: Process %pi - page faults +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42 +msgid "stat_dg_title_processes__ps_pagefaults" +msgstr "" + +#. Pagefaults +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43 +msgid "stat_dg_label_processes__ps_pagefaults" +msgstr "" + +#. page faults +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44 +msgid "stat_ds_ps_pagefaults" +msgstr "" + +#. %H: Process %pi - virtual memory size +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45 +msgid "stat_dg_title_processes__ps_rss" +msgstr "" + +#. Bytes +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46 +msgid "stat_dg_label_processes__ps_rss" +msgstr "" + +#. virtual memory +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47 +msgid "stat_ds_ps_rss" +msgstr "" + +#. %H: Usage on Processor #%pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48 +msgid "stat_dg_title_cpu" +msgstr "" + +#. % +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49 +msgid "stat_dg_label_cpu" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50 +msgid "stat_ds_cpu" +msgstr "" + +#. %H: Transfer on %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51 +msgid "stat_dg_title_interface__if_octets" +msgstr "" + +#. Bytes/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52 +msgid "stat_dg_label_interface__if_octets" +msgstr "" + +#. %H: Packets on %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53 +msgid "stat_dg_title_interface__if_packets" +msgstr "" + +#. Packets/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54 +msgid "stat_dg_label_interface__if_packets" +msgstr "" + +#. %H: TCP-Connections to Port %pi +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55 +msgid "stat_dg_title_tcpconns" +msgstr "" + +#. Connections/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56 +msgid "stat_dg_label_tcpconns" +msgstr "" + +#. %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57 +msgid "stat_ds_tcp_connections" +msgstr "" + +#. %H: Disk Space Usage on %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58 +msgid "stat_dg_title_df" +msgstr "" + +#. Bytes +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59 +msgid "stat_dg_label_df" +msgstr "" + +#. %ds +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60 +msgid "stat_ds_df__free" +msgstr "" + +#. %ds +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61 +msgid "stat_ds_df__used" +msgstr "" + +#. %H: Interrupts +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62 +msgid "stat_dg_title_irq" +msgstr "" + +#. Issues/s +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63 +msgid "stat_dg_label_irq" +msgstr "" + +#. IRQ %di +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64 +msgid "stat_ds_irq" +msgstr "" + +#. %H: System Load +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65 +msgid "stat_dg_title_load" +msgstr "" + +#. Load +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66 +msgid "stat_dg_label_load" +msgstr "" + +#. 1 min +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67 +msgid "stat_ds_load__shortterm" +msgstr "" + +#. 5 min +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68 +msgid "stat_ds_load__midterm" +msgstr "" + +#. 15 min +#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69 +msgid "stat_ds_load__longterm" +msgstr "" diff --git a/po/sk/samba.po b/po/sk/samba.po new file mode 100644 index 0000000000..66ec9e0307 --- /dev/null +++ b/po/sk/samba.po @@ -0,0 +1,73 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Allow guests" +msgstr "" + +msgid "Allow system users to reach their home directories via network shares" +msgstr "" + +msgid "Allowed users" +msgstr "" + +msgid "Create mask" +msgstr "" + +msgid "Description" +msgstr "" + +msgid "Directory mask" +msgstr "" + +msgid "Edit Template" +msgstr "" + +msgid "Edit the template that is used for generating the samba configuration." +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "Mask for new directories" +msgstr "" + +msgid "Mask for new files" +msgstr "" + +msgid "Name" +msgstr "" + +msgid "Network Shares" +msgstr "" + +msgid "Path" +msgstr "" + +msgid "Read-only" +msgstr "" + +msgid "Share home-directories" +msgstr "" + +msgid "Shared Directories" +msgstr "" + +msgid "" +"This is the content of the file '/etc/samba/smb.conf.template' from which " +"your samba configuration will be generated. Values enclosed by pipe symbols " +"('|') should not be changed. They get their values from the 'General " +"Settings' tab." +msgstr "" + +msgid "Workgroup" +msgstr "" diff --git a/po/sk/splash.po b/po/sk/splash.po new file mode 100644 index 0000000000..a5fcc78625 --- /dev/null +++ b/po/sk/splash.po @@ -0,0 +1,229 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Accept" +msgstr "" + +msgid "" +"Access to the internet might be possible nevertheless, because some " +"activists of this project share their private internet connections. These " +"few connections are shared between all users. That means available bandwidth " +"is limited and because of this we ask you not to do any of the following:" +msgstr "" + +msgid "Active Clients" +msgstr "" + +msgid "Allowed hosts/subnets" +msgstr "" + +msgid "" +"Bandwidth limit for clients is only activated when both up- and download " +"limit are set. Use a value of 0 here to completely disable this limitation. " +"Whitelisted clients are not limited." +msgstr "" + +msgid "" +"Become an active member of this community and help by operating your own node" +msgstr "" + +msgid "Blacklist" +msgstr "" + +msgid "Blocked" +msgstr "" + +msgid "By accepting these rules you can use this network for" +msgstr "" + +msgid "Clearance time" +msgstr "" + +msgid "Client-Splash" +msgstr "" + +msgid "" +"Client-Splash is a hotspot authentification system for wireless mesh " +"networks." +msgstr "" + +msgid "Clients download speed is limited to this value (kbyte/s)" +msgstr "" + +msgid "" +"Clients that have accepted the splash are allowed to use the network for " +"that many hours." +msgstr "" + +msgid "Clients upload speed is limited to this value (kbyte/s)" +msgstr "" + +msgid "Contact" +msgstr "" + +msgid "Decline" +msgstr "" + +msgid "Donate some money to help us keep this project alive." +msgstr "" + +msgid "Download limit" +msgstr "" + +msgid "Edit Splash text" +msgstr "" + +msgid "Firewall zone" +msgstr "" + +msgid "General" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "" +"Hosts and Networks that are listed here are excluded from splashing, i.e. " +"they are always allowed." +msgstr "" + +msgid "IP Address" +msgstr "" + +msgid "" +"If you operate your own wifi equipment use channels different from ours." +msgstr "" + +msgid "If you use this network on a regular basis we ask for your support:" +msgstr "" + +msgid "Intercept client traffic on this Interface" +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Interfaces that are used for Splash." +msgstr "" + +msgid "" +"KB/s (Download/Upload). You may be able to remove this limit by actively " +"contributing to this project." +msgstr "" + +msgid "MAC Address" +msgstr "" + +msgid "MAC addresses in this list are blocked." +msgstr "" + +msgid "" +"MAC addresses of whitelisted clients. These do not need to accept the splash " +"and are not bandwidth limited." +msgstr "" + +msgid "Netmask" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "No clients connected" +msgstr "" + +msgid "" +"Please note that we are not an internet service provider but an experimental " +"community network." +msgstr "" + +msgid "Policy" +msgstr "" + +msgid "Save" +msgstr "" + +msgid "Splash rules are integrated in this firewall zone" +msgstr "" + +msgid "Splashtext" +msgstr "" + +msgid "Time remaining" +msgstr "" + +msgid "" +"To ask for the reason why you have been blocked or ask for access again you " +"can try to contact the owner of this access point:" +msgstr "" + +msgid "Traffic in/out" +msgstr "" + +msgid "Upload limit" +msgstr "" + +msgid "Welcome" +msgstr "" + +msgid "Whitelist" +msgstr "" + +msgid "You are now connected to the free wireless mesh network" +msgstr "" + +msgid "" +"You can enter your own text that is displayed to clients here.
It is " +"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, " +"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###." +msgstr "" + +msgid "" +"Your access to this network has been blocked, most likely because you did " +"something that our rules explicitly forbid." +msgstr "" + +msgid "Your bandwidth is limited to" +msgstr "" + +msgid "blacklisted" +msgstr "" + +msgid "expired" +msgstr "" + +msgid "hour(s). After this time you need to accept these rules again." +msgstr "" + +msgid "optional when using host addresses" +msgstr "" + +msgid "perform any kind of illegal activities" +msgstr "" + +msgid "splashed" +msgstr "" + +msgid "temporarily blocked" +msgstr "" + +msgid "the owner of this access point." +msgstr "" + +msgid "unknown" +msgstr "" + +msgid "use filesharing applications on this network" +msgstr "" + +msgid "waste bandwidth with unneccesary downloads or streams" +msgstr "" + +msgid "whitelisted" +msgstr "" diff --git a/po/sk/statistics.po b/po/sk/statistics.po new file mode 100644 index 0000000000..d941336eab --- /dev/null +++ b/po/sk/statistics.po @@ -0,0 +1,593 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Action (target)" +msgstr "" + +msgid "Add command for reading values" +msgstr "" + +msgid "Add matching rule" +msgstr "" + +msgid "Add multiple hosts separated by space." +msgstr "" + +msgid "Add notification command" +msgstr "" + +msgid "Base Directory" +msgstr "" + +msgid "Basic monitoring" +msgstr "" + +msgid "CPU Plugin Configuration" +msgstr "" + +msgid "CSV Output" +msgstr "" + +msgid "CSV Plugin Configuration" +msgstr "" + +msgid "Cache collected data for" +msgstr "" + +msgid "Cache flush interval" +msgstr "" + +msgid "Chain" +msgstr "" + +msgid "CollectLinks" +msgstr "" + +msgid "CollectRoutes" +msgstr "" + +msgid "CollectTopology" +msgstr "" + +msgid "Collectd" +msgstr "" + +msgid "Collectd Settings" +msgstr "" + +msgid "" +"Collectd is a small daemon for collecting data from various sources through " +"different plugins. On this page you can change general settings for the " +"collectd daemon." +msgstr "" + +msgid "Conntrack" +msgstr "" + +msgid "Conntrack Plugin Configuration" +msgstr "" + +msgid "DF Plugin Configuration" +msgstr "" + +msgid "DNS" +msgstr "" + +msgid "DNS Plugin Configuration" +msgstr "" + +msgid "Data collection interval" +msgstr "" + +msgid "Datasets definition file" +msgstr "" + +msgid "Destination ip range" +msgstr "" + +msgid "Directory for collectd plugins" +msgstr "" + +msgid "Directory for sub-configurations" +msgstr "" + +msgid "Disk Plugin Configuration" +msgstr "" + +msgid "Disk Space Usage" +msgstr "" + +msgid "Disk Usage" +msgstr "" + +msgid "Display Host »" +msgstr "" + +msgid "Display timespan »" +msgstr "" + +msgid "E-Mail Plugin Configuration" +msgstr "" + +msgid "Email" +msgstr "" + +msgid "Enable this plugin" +msgstr "" + +msgid "Exec" +msgstr "" + +msgid "Exec Plugin Configuration" +msgstr "" + +msgid "Filter class monitoring" +msgstr "" + +msgid "Firewall" +msgstr "" + +msgid "Flush cache after" +msgstr "" + +msgid "Forwarding between listen and server addresses" +msgstr "" + +msgid "Graphs" +msgstr "" + +msgid "Group" +msgstr "" + +msgid "" +"Here you can define external commands which will be started by collectd in " +"order to read certain values. The values will be read from stdout." +msgstr "" + +msgid "" +"Here you can define external commands which will be started by collectd when " +"certain threshold values have been reached. The values leading to invokation " +"will be feeded to the the called programs stdin." +msgstr "" + +msgid "" +"Here you can define various criteria by which the monitored iptables rules " +"are selected." +msgstr "" + +msgid "Host" +msgstr "" + +msgid "Hostname" +msgstr "" + +msgid "IP or hostname where to get the txtinfo output from" +msgstr "" + +msgid "IRQ Plugin Configuration" +msgstr "" + +msgid "Ignore source addresses" +msgstr "" + +msgid "Incoming interface" +msgstr "" + +msgid "Interface Plugin Configuration" +msgstr "" + +msgid "Interfaces" +msgstr "" + +msgid "Interrupts" +msgstr "" + +msgid "Interval for pings" +msgstr "" + +msgid "Iptables Plugin Configuration" +msgstr "" + +msgid "Leave unselected to automatically determine interfaces to monitor." +msgstr "" + +msgid "Listen host" +msgstr "" + +msgid "Listen port" +msgstr "" + +msgid "Listener interfaces" +msgstr "" + +msgid "Load Plugin Configuration" +msgstr "" + +msgid "Maximum allowed connections" +msgstr "" + +msgid "Memory" +msgstr "" + +msgid "Memory Plugin Configuration" +msgstr "" + +msgid "Monitor all except specified" +msgstr "" + +msgid "Monitor all local listen ports" +msgstr "" + +msgid "Monitor devices" +msgstr "" + +msgid "Monitor disks and partitions" +msgstr "" + +msgid "Monitor filesystem types" +msgstr "" + +msgid "Monitor hosts" +msgstr "" + +msgid "Monitor interfaces" +msgstr "" + +msgid "Monitor interrupts" +msgstr "" + +msgid "Monitor local ports" +msgstr "" + +msgid "Monitor mount points" +msgstr "" + +msgid "Monitor processes" +msgstr "" + +msgid "Monitor remote ports" +msgstr "" + +msgid "Name of the rule" +msgstr "" + +msgid "Netlink" +msgstr "" + +msgid "Netlink Plugin Configuration" +msgstr "" + +msgid "Network" +msgstr "" + +msgid "Network Plugin Configuration" +msgstr "" + +msgid "Network plugins" +msgstr "" + +msgid "Network protocol" +msgstr "" + +msgid "Number of threads for data collection" +msgstr "" + +msgid "OLSRd" +msgstr "" + +msgid "OLSRd Plugin Configuration" +msgstr "" + +msgid "Only create average RRAs" +msgstr "" + +msgid "Options" +msgstr "" + +msgid "Outgoing interface" +msgstr "" + +msgid "Output plugins" +msgstr "" + +msgid "Ping" +msgstr "" + +msgid "Ping Plugin Configuration" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Processes" +msgstr "" + +msgid "Processes Plugin Configuration" +msgstr "" + +msgid "Processes to monitor separated by space" +msgstr "" + +msgid "Processor" +msgstr "" + +msgid "Qdisc monitoring" +msgstr "" + +msgid "RRD XFiles Factor" +msgstr "" + +msgid "RRD heart beat interval" +msgstr "" + +msgid "RRD step interval" +msgstr "" + +msgid "RRDTool" +msgstr "" + +msgid "RRDTool Plugin Configuration" +msgstr "" + +msgid "Rows per RRA" +msgstr "" + +msgid "Script" +msgstr "" + +msgid "Seconds" +msgstr "" + +msgid "Server host" +msgstr "" + +msgid "Server port" +msgstr "" + +msgid "Shaping class monitoring" +msgstr "" + +msgid "Socket file" +msgstr "" + +msgid "Socket group" +msgstr "" + +msgid "Socket permissions" +msgstr "" + +msgid "Source ip range" +msgstr "" + +msgid "Specifies what information to collect about links." +msgstr "" + +msgid "Specifies what information to collect about routes." +msgstr "" + +msgid "Specifies what information to collect about the global topology." +msgstr "" + +msgid "Statistics" +msgstr "" + +msgid "Storage directory" +msgstr "" + +msgid "Storage directory for the csv files" +msgstr "" + +msgid "Store data values as rates instead of absolute values" +msgstr "" + +msgid "Stored timespans" +msgstr "" + +msgid "System Load" +msgstr "" + +msgid "System plugins" +msgstr "" + +msgid "TCP Connections" +msgstr "" + +msgid "TCPConns Plugin Configuration" +msgstr "" + +msgid "TTL for network packets" +msgstr "" + +msgid "TTL for ping packets" +msgstr "" + +msgid "Table" +msgstr "" + +msgid "The NUT plugin reads information about Uninterruptible Power Supplies." +msgstr "" + +msgid "" +"The OLSRd plugin reads information about meshed networks from the txtinfo " +"plugin of OLSRd." +msgstr "" + +msgid "" +"The conntrack plugin collects statistics about the number of tracked " +"connections." +msgstr "" + +msgid "The cpu plugin collects basic statistics about the processor usage." +msgstr "" + +msgid "" +"The csv plugin stores collected data in csv file format for further " +"processing by external programs." +msgstr "" + +msgid "" +"The df plugin collects statistics about the disk space usage on different " +"devices, mount points or filesystem types." +msgstr "" + +msgid "" +"The disk plugin collects detailled usage statistics for selected partitions " +"or whole disks." +msgstr "" + +msgid "" +"The dns plugin collects detailled statistics about dns related traffic on " +"selected interfaces." +msgstr "" + +msgid "" +"The email plugin creates a unix socket which can be used to transmit email-" +"statistics to a running collectd daemon. This plugin is primarily intended " +"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can " +"be used in other ways as well." +msgstr "" + +msgid "" +"The exec plugin starts external commands to read values from or to notify " +"external processes when certain threshold values have been reached." +msgstr "" + +msgid "" +"The interface plugin collects traffic statistics on selected interfaces." +msgstr "" + +msgid "" +"The iptables plugin will monitor selected firewall rules and collect " +"informations about processed bytes and packets per rule." +msgstr "" + +msgid "" +"The irq plugin will monitor the rate of issues per second for each selected " +"interrupt. If no interrupt is selected then all interrupts are monitored." +msgstr "" + +msgid "" +"The iwinfo plugin collects statistics about wireless signal strength, noise " +"and quality." +msgstr "" + +msgid "The load plugin collects statistics about the general system load." +msgstr "" + +msgid "The memory plugin collects statistics about the memory usage." +msgstr "" + +msgid "" +"The netlink plugin collects extended informations like qdisc-, class- and " +"filter-statistics for selected interfaces." +msgstr "" + +msgid "" +"The network plugin provides network based communication between different " +"collectd instances. Collectd can operate both in client and server mode. In " +"client mode locally collected date is transferred to a collectd server " +"instance, in server mode the local instance receives data from other hosts." +msgstr "" + +msgid "" +"The ping plugin will send icmp echo replies to selected hosts and measure " +"the roundtrip time for each host." +msgstr "" + +msgid "" +"The processes plugin collects informations like cpu time, page faults and " +"memory usage of selected processes." +msgstr "" + +msgid "" +"The rrdtool plugin stores the collected data in rrd database files, the " +"foundation of the diagrams.

Warning: Setting the wrong " +"values will result in a very high memory consumption in the temporary " +"directory. This can render the device unusable!" +msgstr "" + +msgid "" +"The statistics package is based on Collectd and uses RRD " +"Tool to render diagram images from collected data." +msgstr "" + +msgid "" +"The tcpconns plugin collects informations about open tcp connections on " +"selected ports." +msgstr "" + +msgid "" +"The unixsock plugin creates a unix socket which can be used to read " +"collected data from a running collectd instance." +msgstr "" + +msgid "" +"This section defines on which interfaces collectd will wait for incoming " +"connections." +msgstr "" + +msgid "" +"This section defines to which servers the locally collected data is sent to." +msgstr "" + +msgid "Try to lookup fully qualified hostname" +msgstr "" + +msgid "UPS" +msgstr "" + +msgid "UPS Plugin Configuration" +msgstr "" + +msgid "UPS name in NUT ups@host format" +msgstr "" + +msgid "UnixSock" +msgstr "" + +msgid "Unixsock Plugin Configuration" +msgstr "" + +msgid "Used PID file" +msgstr "" + +msgid "User" +msgstr "" + +msgid "Verbose monitoring" +msgstr "" + +msgid "Wireless" +msgstr "" + +msgid "Wireless iwinfo Plugin Configuration" +msgstr "" + +msgid "e.g. br-ff" +msgstr "" + +msgid "e.g. br-lan" +msgstr "" + +msgid "e.g. reject-with tcp-reset" +msgstr "" + +msgid "max. 16 chars" +msgstr "" + +msgid "reduces rrd size" +msgstr "" + +msgid "seconds; multiple separated by space" +msgstr "" + +msgid "server interfaces" +msgstr "" diff --git a/po/sk/tinyproxy.po b/po/sk/tinyproxy.po new file mode 100644 index 0000000000..128c71d4f2 --- /dev/null +++ b/po/sk/tinyproxy.po @@ -0,0 +1,255 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "" +"Via proxy routes requests to the given target via the specifed " +"upstream proxy, Reject access disables any upstream proxy for the " +"target" +msgstr "" + +msgid "" +"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded " +"requests" +msgstr "" + +msgid "Allowed clients" +msgstr "" + +msgid "Allowed connect ports" +msgstr "" + +msgid "Bind address" +msgstr "" + +msgid "" +"By default, basic POSIX expressions are used for filtering. Enable this to " +"activate extended regular expressions" +msgstr "" + +msgid "" +"By default, filter strings are treated as case-insensitive. Enable this to " +"make the matching case-sensitive" +msgstr "" + +msgid "" +"By default, filtering is done based on domain names. Enable this to match " +"against URLs instead" +msgstr "" + +msgid "" +"By default, the filter rules act as blacklist. Enable this option to only " +"allow matched URLs or domain names" +msgstr "" + +msgid "" +"Can be either an IP address or range, a domain name or \".\" for any host " +"without domain" +msgstr "" + +msgid "Configuration" +msgstr "" + +msgid "Connection timeout" +msgstr "" + +msgid "Default deny" +msgstr "" + +msgid "Enable Tinyproxy server" +msgstr "" + +msgid "Error page" +msgstr "" + +msgid "Failed to retrieve statistics from url:" +msgstr "" + +msgid "Filter by RegExp" +msgstr "" + +msgid "Filter by URLs" +msgstr "" + +msgid "Filter case-sensitive" +msgstr "" + +msgid "Filter file" +msgstr "" + +msgid "Filtering and ACLs" +msgstr "" + +msgid "General settings" +msgstr "" + +msgid "Group" +msgstr "" + +msgid "HTML template file to serve for stat host requests" +msgstr "" + +msgid "HTML template file to serve when HTTP errors occur" +msgstr "" + +msgid "Header whitelist" +msgstr "" + +msgid "" +"List of IP addresses or ranges which are allowed to use the proxy server" +msgstr "" + +msgid "" +"List of allowed ports for the CONNECT method. A single value \"0\" allows " +"all ports" +msgstr "" + +msgid "Listen address" +msgstr "" + +msgid "Listen port" +msgstr "" + +msgid "Log file" +msgstr "" + +msgid "Log file to use for dumping messages" +msgstr "" + +msgid "Log level" +msgstr "" + +msgid "Logging verbosity of the Tinyproxy process" +msgstr "" + +msgid "Max. clients" +msgstr "" + +msgid "Max. requests per server" +msgstr "" + +msgid "Max. spare servers" +msgstr "" + +msgid "Maximum allowed number of concurrently connected clients" +msgstr "" + +msgid "" +"Maximum allowed number of requests per process. If it is exeeded, the " +"process is restarted. Zero means unlimited." +msgstr "" + +msgid "Maximum number of prepared idle processes" +msgstr "" + +msgid "Maximum number of seconds an inactive connection is held open" +msgstr "" + +msgid "Min. spare servers" +msgstr "" + +msgid "Minimum number of prepared idle processes" +msgstr "" + +msgid "Number of idle processes to start when launching Tinyproxy" +msgstr "" + +msgid "Plaintext file with URLs or domains to filter. One entry per line" +msgstr "" + +msgid "Policy" +msgstr "" + +msgid "Privacy settings" +msgstr "" + +msgid "Reject access" +msgstr "" + +msgid "Server Settings" +msgstr "" + +msgid "Server limits" +msgstr "" + +msgid "" +"Specifies HTTP header names which are allowed to pass-through, all others " +"are discarded. Leave empty to disable header filtering" +msgstr "" + +msgid "Specifies the HTTP port Tinyproxy is listening on for requests" +msgstr "" + +msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header" +msgstr "" + +msgid "" +"Specifies the address Tinyproxy binds to for outbound forwarded requests" +msgstr "" + +msgid "Specifies the addresses Tinyproxy is listening on for requests" +msgstr "" + +msgid "Specifies the group name the Tinyproxy process is running as" +msgstr "" + +msgid "" +"Specifies the upstream proxy to use for accessing the target host. Format is " +"address:port" +msgstr "" + +msgid "Specifies the user name the Tinyproxy process is running as" +msgstr "" + +msgid "Start spare servers" +msgstr "" + +msgid "Statistics page" +msgstr "" + +msgid "Status" +msgstr "" + +msgid "Target host" +msgstr "" + +msgid "Tinyproxy" +msgstr "" + +msgid "Tinyproxy Status" +msgstr "" + +msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy" +msgstr "" + +msgid "Upstream Proxies" +msgstr "" + +msgid "" +"Upstream proxy rules define proxy servers to use when accessing certain IP " +"addresses or domains." +msgstr "" + +msgid "Use syslog" +msgstr "" + +msgid "User" +msgstr "" + +msgid "Via hostname" +msgstr "" + +msgid "Via proxy" +msgstr "" + +msgid "Writes log messages to syslog instead of a log file" +msgstr "" + +msgid "X-Tinyproxy header" +msgstr "" diff --git a/po/sk/transmission.po b/po/sk/transmission.po new file mode 100644 index 0000000000..4b4c3afd9a --- /dev/null +++ b/po/sk/transmission.po @@ -0,0 +1,290 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Alternative download speed" +msgstr "" + +msgid "Alternative speed enabled" +msgstr "" + +msgid "Alternative speed time begin" +msgstr "" + +msgid "Alternative speed time day" +msgstr "" + +msgid "Alternative speed time end" +msgstr "" + +msgid "Alternative speed timing enabled" +msgstr "" + +msgid "Alternative upload speed" +msgstr "" + +msgid "Automatically start added torrents" +msgstr "" + +msgid "Bandwidth settings" +msgstr "" + +msgid "Binding address IPv4" +msgstr "" + +msgid "Binding address IPv6" +msgstr "" + +msgid "Block list enabled" +msgstr "" + +msgid "Blocklist URL" +msgstr "" + +msgid "Blocklists" +msgstr "" + +msgid "Cache size in MB" +msgstr "" + +msgid "Config file directory" +msgstr "" + +msgid "DHT enabled" +msgstr "" + +msgid "Debug" +msgstr "" + +msgid "Download directory" +msgstr "" + +msgid "Download queue enabled" +msgstr "" + +msgid "Download queue size" +msgstr "" + +msgid "Enable watch directory" +msgstr "" + +msgid "Enabled" +msgstr "" + +msgid "Encryption" +msgstr "" + +msgid "Error" +msgstr "" + +msgid "Fast" +msgstr "" + +msgid "Files and Locations" +msgstr "" + +msgid "Forced" +msgstr "" + +msgid "Full" +msgstr "" + +msgid "Global peer limit" +msgstr "" + +msgid "Global settings" +msgstr "" + +msgid "Idle seeding limit" +msgstr "" + +msgid "Idle seeding limit enabled" +msgstr "" + +msgid "Incomplete directory" +msgstr "" + +msgid "Incomplete directory enabled" +msgstr "" + +msgid "Info" +msgstr "" + +msgid "LPD enabled" +msgstr "" + +msgid "Lazy bitfield enabled" +msgstr "" + +msgid "Message level" +msgstr "" + +msgid "Miscellaneous" +msgstr "" + +msgid "None" +msgstr "" + +msgid "" +"Number/bitfield. Start with 0, then for each day you want the scheduler " +"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - " +"8, Thursday - 16, Friday - 32, Saturday - 64" +msgstr "" + +msgid "Off" +msgstr "" + +msgid "Open Web Interface" +msgstr "" + +msgid "PEX enabled" +msgstr "" + +msgid "Peer Port settings" +msgstr "" + +msgid "Peer congestion algorithm" +msgstr "" + +msgid "Peer limit per torrent" +msgstr "" + +msgid "Peer port" +msgstr "" + +msgid "Peer port random high" +msgstr "" + +msgid "Peer port random low" +msgstr "" + +msgid "Peer port random on start" +msgstr "" + +msgid "Peer settings" +msgstr "" + +msgid "Peer socket tos" +msgstr "" + +msgid "Port forwarding enabled" +msgstr "" + +msgid "Preferred" +msgstr "" + +msgid "Prefetch enabled" +msgstr "" + +msgid "Queue stalled enabled" +msgstr "" + +msgid "Queue stalled minutes" +msgstr "" + +msgid "Queueing" +msgstr "" + +msgid "RPC URL" +msgstr "" + +msgid "RPC authentication required" +msgstr "" + +msgid "RPC bind address" +msgstr "" + +msgid "RPC enabled" +msgstr "" + +msgid "RPC password" +msgstr "" + +msgid "RPC port" +msgstr "" + +msgid "RPC settings" +msgstr "" + +msgid "RPC username" +msgstr "" + +msgid "RPC whitelist" +msgstr "" + +msgid "RPC whitelist enabled" +msgstr "" + +msgid "Ratio limit" +msgstr "" + +msgid "Ratio limit enabled" +msgstr "" + +msgid "Rename partial files" +msgstr "" + +msgid "Run daemon as user" +msgstr "" + +msgid "Scheduling" +msgstr "" + +msgid "Scrape paused torrents enabled" +msgstr "" + +msgid "Script torrent done enabled" +msgstr "" + +msgid "Script torrent done filename" +msgstr "" + +msgid "Seed queue enabled" +msgstr "" + +msgid "Seed queue size" +msgstr "" + +msgid "Speed limit down" +msgstr "" + +msgid "Speed limit down enabled" +msgstr "" + +msgid "Speed limit up" +msgstr "" + +msgid "Speed limit up enabled" +msgstr "" + +msgid "Transmission" +msgstr "" + +msgid "" +"Transmission daemon is a simple bittorrent client, here you can configure " +"the settings." +msgstr "" + +msgid "Trash original torrent files" +msgstr "" + +msgid "Upload slots per torrent" +msgstr "" + +msgid "Watch directory" +msgstr "" + +msgid "in minutes from midnight" +msgstr "" + +msgid "preallocation" +msgstr "" + +msgid "uTP enabled" +msgstr "" diff --git a/po/sk/upnp.po b/po/sk/upnp.po new file mode 100644 index 0000000000..7d0bc1fae8 --- /dev/null +++ b/po/sk/upnp.po @@ -0,0 +1,144 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "" +"ACLs specify which external ports may be redirected to which internal " +"addresses and ports" +msgstr "" + +msgid "Action" +msgstr "" + +msgid "Active UPnP Redirects" +msgstr "" + +msgid "Advanced Settings" +msgstr "" + +msgid "Allow adding forwards only to requesting ip addresses" +msgstr "" + +msgid "Announced model number" +msgstr "" + +msgid "Announced serial number" +msgstr "" + +msgid "Clean rules interval" +msgstr "" + +msgid "Clean rules threshold" +msgstr "" + +msgid "Client Address" +msgstr "" + +msgid "Client Port" +msgstr "" + +msgid "Collecting data..." +msgstr "" + +msgid "Comment" +msgstr "" + +msgid "Delete Redirect" +msgstr "" + +msgid "Device UUID" +msgstr "" + +msgid "Downlink" +msgstr "" + +msgid "Enable NAT-PMP functionality" +msgstr "" + +msgid "Enable UPnP functionality" +msgstr "" + +msgid "Enable additional logging" +msgstr "" + +msgid "Enable secure mode" +msgstr "" + +msgid "External Port" +msgstr "" + +msgid "External ports" +msgstr "" + +msgid "General Settings" +msgstr "" + +msgid "Internal addresses" +msgstr "" + +msgid "Internal ports" +msgstr "" + +msgid "MiniUPnP ACLs" +msgstr "" + +msgid "MiniUPnP settings" +msgstr "" + +msgid "Notify interval" +msgstr "" + +msgid "Port" +msgstr "" + +msgid "Presentation URL" +msgstr "" + +msgid "Protocol" +msgstr "" + +msgid "Puts extra debugging information into the system log" +msgstr "" + +msgid "Report system instead of daemon uptime" +msgstr "" + +msgid "Start UPnP and NAT-PMP service" +msgstr "" + +msgid "There are no active redirects." +msgstr "" + +msgid "UPNP" +msgstr "" + +msgid "" +"UPNP allows clients in the local network to automatically configure the " +"router." +msgstr "" + +msgid "" +"UPnP allows clients in the local network to automatically configure the " +"router." +msgstr "" + +msgid "UPnP lease file" +msgstr "" + +msgid "Universal Plug & Play" +msgstr "" + +msgid "Uplink" +msgstr "" + +msgid "Value in KByte/s, informational only" +msgstr "" + +msgid "enable" +msgstr "" diff --git a/po/sk/ushare.po b/po/sk/ushare.po new file mode 100644 index 0000000000..4c9022b652 --- /dev/null +++ b/po/sk/ushare.po @@ -0,0 +1,45 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Content directories" +msgstr "" + +msgid "Disable telnet console" +msgstr "" + +msgid "Disable webinterface" +msgstr "" + +msgid "Enable" +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Options" +msgstr "" + +msgid "Servername" +msgstr "" + +msgid "Settings" +msgstr "" + +msgid "Username" +msgstr "" + +msgid "uShare" +msgstr "" + +msgid "" +"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server " +"component that provides UPnP media devices with information on available " +"multimedia files." +msgstr "" diff --git a/po/sk/uvc_streamer.po b/po/sk/uvc_streamer.po new file mode 100644 index 0000000000..b251f29f53 --- /dev/null +++ b/po/sk/uvc_streamer.po @@ -0,0 +1,38 @@ +# uvc_streamer.pot +# generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +#. Frames per second +#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1 +msgid "Frames per second" +msgstr "" + +#. Resolution +#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2 +msgid "Resolution" +msgstr "" + +#. Settings +#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3 +msgid "Settings" +msgstr "" + +#. Webcam streaming +#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4 +msgid "Webcam streaming" +msgstr "" + +#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. http://%s:%i/ +#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5 +msgid "" +"Configure your Linux-UVC compatible webcam. Point your browser to e.g. http://%s:%i/" +msgstr "" diff --git a/po/sk/vnstat.po b/po/sk/vnstat.po new file mode 100644 index 0000000000..5926ecfeb0 --- /dev/null +++ b/po/sk/vnstat.po @@ -0,0 +1,58 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Configuration" +msgstr "" + +msgid "Daily traffic" +msgstr "" + +msgid "Graphs" +msgstr "" + +msgid "Hourly traffic" +msgstr "" + +msgid "Monitor selected interfaces" +msgstr "" + +msgid "Monthly traffic" +msgstr "" + +msgid "" +"No database has been set up yet. Go to the VnStat configuration and enable " +"monitoring for one or more interfaces." +msgstr "" + +msgid "Restart VnStat" +msgstr "" + +msgid "Summary display" +msgstr "" + +msgid "Top 10 display" +msgstr "" + +msgid "Update »" +msgstr "" + +msgid "VnStat" +msgstr "" + +msgid "VnStat Graphs" +msgstr "" + +msgid "VnStat Traffic Monitor" +msgstr "" + +msgid "" +"VnStat is a network traffic monitor for Linux that keeps a log of network " +"traffic for the selected interface(s)." +msgstr "" diff --git a/po/sk/voice_core.po b/po/sk/voice_core.po new file mode 100644 index 0000000000..9c30581d14 --- /dev/null +++ b/po/sk/voice_core.po @@ -0,0 +1,15 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Phones" +msgstr "" + +msgid "Voice" +msgstr "" diff --git a/po/sk/voice_diag.po b/po/sk/voice_diag.po new file mode 100644 index 0000000000..874e11fc51 --- /dev/null +++ b/po/sk/voice_diag.po @@ -0,0 +1,22 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Diagnostics" +msgstr "" + +msgid "" +"The diagnostics available on your device depend on the modules that you have " +"installed." +msgstr "" + +msgid "" +"Under this menu are options that allow you to configure and perform tests on " +"the voice operations of your system. These are known as diagnostics." +msgstr "" diff --git a/po/sk/watchcat.po b/po/sk/watchcat.po new file mode 100644 index 0000000000..9ca2abc0fe --- /dev/null +++ b/po/sk/watchcat.po @@ -0,0 +1,53 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Forced reboot delay" +msgstr "" + +msgid "Host address to ping" +msgstr "" + +msgid "" +"How often to check internet connection. Default unit is seconds, you can you " +"use the suffix 'm' for minutes, 'h' for hours or 'd' for days" +msgstr "" + +msgid "" +"In periodic mode, it defines the reboot period. In internet mode, it defines " +"the longest period of time without internet access before a reboot is " +"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' " +"for hours or 'd' for days" +msgstr "" + +msgid "Operating mode" +msgstr "" + +msgid "Period" +msgstr "" + +msgid "Ping host" +msgstr "" + +msgid "Ping period" +msgstr "" + +msgid "Watchcat" +msgstr "" + +msgid "" +"Watchcat allows to configure a periodic reboot and/or when internet " +"connection has been lost for a certain period of time." +msgstr "" + +msgid "" +"When rebooting the system the watchcat will trigger a soft reboot, Entering " +"a non zero value here, will trigger a delayed hard reboot if the soft reboot " +"fails. Enter a number of seconds to enable, use 0 to disable" +msgstr "" diff --git a/po/sk/wol.po b/po/sk/wol.po new file mode 100644 index 0000000000..59032ee0ea --- /dev/null +++ b/po/sk/wol.po @@ -0,0 +1,44 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Broadcast on all interfaces" +msgstr "" + +msgid "Choose the host to wake up or enter a custom MAC address to use" +msgstr "" + +msgid "Host to wake up" +msgstr "" + +msgid "Network interface to use" +msgstr "" + +msgid "" +"Sometimes only one of both tools work. If one of fails, try the other one" +msgstr "" + +msgid "Specifies the interface the WoL packet is sent on" +msgstr "" + +msgid "Starting WoL utility:" +msgstr "" + +msgid "Wake on LAN" +msgstr "" + +msgid "" +"Wake on LAN is a mechanism to remotely boot computers in the local network." +msgstr "" + +msgid "Wake up host" +msgstr "" + +msgid "WoL program" +msgstr "" diff --git a/po/sk/wshaper.po b/po/sk/wshaper.po new file mode 100644 index 0000000000..c974be4b4d --- /dev/null +++ b/po/sk/wshaper.po @@ -0,0 +1,50 @@ +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: PACKAGE VERSION\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" + +msgid "Downlink" +msgstr "" + +msgid "Downstream bandwidth in kbit/s" +msgstr "" + +msgid "Host or Network in CIDR notation." +msgstr "" + +msgid "Interface" +msgstr "" + +msgid "Low priority destination ports" +msgstr "" + +msgid "Low priority hosts (Destination)" +msgstr "" + +msgid "Low priority hosts (Source)" +msgstr "" + +msgid "Low priority source ports" +msgstr "" + +msgid "Uplink" +msgstr "" + +msgid "Upstream bandwidth in kbit/s" +msgstr "" + +msgid "Wondershaper" +msgstr "" + +msgid "Wondershaper settings" +msgstr "" + +msgid "" +"Wondershaper uses traffic shaping to ensure low latencies for interactive " +"traffic even when your internet connection is highly saturated." +msgstr ""