From: John Crispin Date: Tue, 1 Dec 2020 16:13:39 +0000 (+0100) Subject: realtek: add zyxel_gs1900-10hp support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cfbda6627956af0cab380d03fd9275574e67921e;p=openwrt%2Fstaging%2Fblocktrron.git realtek: add zyxel_gs1900-10hp support Signed-off-by: John Crispin --- diff --git a/target/linux/realtek/config-5.4 b/target/linux/realtek/config-5.4 index 0d459237c7..170bcb7632 100644 --- a/target/linux/realtek/config-5.4 +++ b/target/linux/realtek/config-5.4 @@ -81,6 +81,10 @@ CONFIG_HAS_IOPORT_MAP=y CONFIG_HZ=250 CONFIG_HZ_250=y CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_GPIO=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y @@ -95,6 +99,7 @@ CONFIG_LIBFDT=y CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_I2C=y CONFIG_MEMFD_CREATE=y CONFIG_MFD_SYSCON=y CONFIG_MIGRATION=y @@ -156,6 +161,7 @@ CONFIG_RESET_CONTROLLER=y CONFIG_RTL838X=y CONFIG_SERIAL_MCTRL_GPIO=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SFP=y CONFIG_SPI=y CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts new file mode 100644 index 0000000000..4458acee2e --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-10HP Switch"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio1: rtl8231-gpio { + status = "okay"; + + poe_enable { + gpio-hog; + gpios = <13 0>; + output-high; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "gs1900:green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + }; + + /* i2c of the left SFP cage: port 9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "_sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "_sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; + +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + read-only; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@b260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "denx,uimage"; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* Internal phy */ + phy8: ethernet-phy@8 { + reg = <8>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy9: ethernet-phy@9 { + reg = <9>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy10: ethernet-phy@10 { + reg = <10>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <11>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <12>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <13>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <14>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy15: ethernet-phy@15 { + reg = <15>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + phy24: ethernet-phy@24 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <24>; + }; + phy26: ethernet-phy@26 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <26>; + }; + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <8>; + label = "lan1"; + phy-handle = <&phy8>; + phy-mode = "internal"; + }; + port@1 { + reg = <9>; + label = "lan2"; + phy-handle = <&phy9>; + phy-mode = "internal"; + }; + port@2 { + reg = <10>; + label = "lan3"; + phy-handle = <&phy10>; + phy-mode = "internal"; + }; + port@3 { + reg = <11>; + label = "lan4"; + phy-handle = <&phy11>; + phy-mode = "internal"; + }; + port@4 { + reg = <12>; + label = "lan5"; + phy-handle = <&phy12>; + phy-mode = "internal"; + }; + port@5 { + reg = <13>; + label = "lan6"; + phy-handle = <&phy13>; + phy-mode = "internal"; + }; + port@6 { + reg = <14>; + label = "lan7"; + phy-handle = <&phy14>; + phy-mode = "internal"; + }; + port@7 { + reg = <15>; + label = "lan8"; + phy-handle = <&phy15>; + phy-mode = "internal"; + }; + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "rgmii-id"; + phy-handle = <&phy24>; + sfp = <&sfp0>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@26 { + reg = <26>; + label = "lan10"; + phy-mode = "rgmii-id"; + phy-handle = <&phy26>; + sfp = <&sfp1>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile index 51356b3518..85b30aae1e 100644 --- a/target/linux/realtek/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -65,4 +65,12 @@ define Device/netgear_gs110tpp-v1 endef TARGET_DEVICES += netgear_gs110tpp-v1 +define Device/zyxel_gs1900-10hp + SOC := rtl8380 + IMAGE_SIZE := 6976k + DEVICE_VENDOR := Zyxel + DEVICE_MODEL := GS1900-10HP +endef +TARGET_DEVICES += zyxel_gs1900-10hp + $(eval $(call BuildImage))