From: Rod Whitby Date: Mon, 18 Dec 2006 01:58:28 +0000 (+0000) Subject: Fixed patch naming to match conventions X-Git-Tag: reboot~30239 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cebfa34f6abc3390dba29c0da57af0065ea73466;p=openwrt%2Fstaging%2Fpepe2k.git Fixed patch naming to match conventions SVN-Revision: 5831 --- diff --git a/target/linux/ixp4xx-2.6/patches/133-ixp4xx-net-driver-improve-mac-handling.patch b/target/linux/ixp4xx-2.6/patches/133-ixp4xx-net-driver-improve-mac-handling.patch deleted file mode 100644 index a808e4dfa9..0000000000 --- a/target/linux/ixp4xx-2.6/patches/133-ixp4xx-net-driver-improve-mac-handling.patch +++ /dev/null @@ -1,60 +0,0 @@ -Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h -=================================================================== ---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h -+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h -@@ -100,6 +100,7 @@ struct mac_plat_info { - int phy_id; /* ID of the connected PHY (PCB/platform dependent) */ - int rxq_id; /* Queue ID of the RX-free q*/ - int txq_id; /* Where to push the outgoing packets */ -+ unsigned char hwaddr[6]; /* Desired hardware address */ - }; - - -Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c -=================================================================== ---- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c -+++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c -@@ -189,6 +189,24 @@ static int ixmac_open (struct net_device - } - mac->rxq_pkt += RX_QUEUE_PREFILL; - -+ /* printk(KERN_INFO "...Platform MAC=0x%02x%02x%02x%02x%02x%02x\n", -+ mac->plat->hwaddr[0], -+ mac->plat->hwaddr[1], -+ mac->plat->hwaddr[2], -+ mac->plat->hwaddr[3], -+ mac->plat->hwaddr[4], -+ mac->plat->hwaddr[5] -+ ); */ -+ /* Only use platform or random if there's currently no device hw addr */ -+ if (is_zero_ether_addr(dev->dev_addr)) { -+ if (is_zero_ether_addr(mac->plat->hwaddr)) { -+ random_ether_addr(dev->dev_addr); -+ dev->dev_addr[5] = mac->plat->phy_id; -+ } -+ else -+ memcpy(dev->dev_addr, mac->plat->hwaddr, 6); -+ } -+ - mac_init(mac); - npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID); - mac_set_uniaddr(dev); -@@ -434,9 +452,15 @@ static int mac_probe(struct platform_dev - * following commands: - * "ip link set address 02:03:04:04:04:01 dev eth0" - * "ifconfig eth0 hw ether 02:03:04:04:04:07" -- */ -- random_ether_addr(dev->dev_addr); -- dev->dev_addr[5] = plat->phy_id; -+ */ -+/* Note: moved to ixmac_open to allow notifiers to run for compiled in modules -+ if (is_zero_ether_addr(plat->hwaddr)) { -+ random_ether_addr(dev->dev_addr); -+ dev->dev_addr[5] = plat->phy_id; -+ } -+ else -+ memcpy(dev->dev_addr, plat->hwaddr, 6); -+*/ - - printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION - ": %s on %s with PHY[%d] initialized\n", diff --git a/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch b/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch new file mode 100644 index 0000000000..a808e4dfa9 --- /dev/null +++ b/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch @@ -0,0 +1,60 @@ +Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h +=================================================================== +--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h ++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h +@@ -100,6 +100,7 @@ struct mac_plat_info { + int phy_id; /* ID of the connected PHY (PCB/platform dependent) */ + int rxq_id; /* Queue ID of the RX-free q*/ + int txq_id; /* Where to push the outgoing packets */ ++ unsigned char hwaddr[6]; /* Desired hardware address */ + }; + + +Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c +=================================================================== +--- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c ++++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c +@@ -189,6 +189,24 @@ static int ixmac_open (struct net_device + } + mac->rxq_pkt += RX_QUEUE_PREFILL; + ++ /* printk(KERN_INFO "...Platform MAC=0x%02x%02x%02x%02x%02x%02x\n", ++ mac->plat->hwaddr[0], ++ mac->plat->hwaddr[1], ++ mac->plat->hwaddr[2], ++ mac->plat->hwaddr[3], ++ mac->plat->hwaddr[4], ++ mac->plat->hwaddr[5] ++ ); */ ++ /* Only use platform or random if there's currently no device hw addr */ ++ if (is_zero_ether_addr(dev->dev_addr)) { ++ if (is_zero_ether_addr(mac->plat->hwaddr)) { ++ random_ether_addr(dev->dev_addr); ++ dev->dev_addr[5] = mac->plat->phy_id; ++ } ++ else ++ memcpy(dev->dev_addr, mac->plat->hwaddr, 6); ++ } ++ + mac_init(mac); + npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID); + mac_set_uniaddr(dev); +@@ -434,9 +452,15 @@ static int mac_probe(struct platform_dev + * following commands: + * "ip link set address 02:03:04:04:04:01 dev eth0" + * "ifconfig eth0 hw ether 02:03:04:04:04:07" +- */ +- random_ether_addr(dev->dev_addr); +- dev->dev_addr[5] = plat->phy_id; ++ */ ++/* Note: moved to ixmac_open to allow notifiers to run for compiled in modules ++ if (is_zero_ether_addr(plat->hwaddr)) { ++ random_ether_addr(dev->dev_addr); ++ dev->dev_addr[5] = plat->phy_id; ++ } ++ else ++ memcpy(dev->dev_addr, plat->hwaddr, 6); ++*/ + + printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION + ": %s on %s with PHY[%d] initialized\n", diff --git a/target/linux/ixp4xx-2.6/patches/139-ixp4xx-net-driver-mtd-load-fw.patch b/target/linux/ixp4xx-2.6/patches/139-ixp4xx-net-driver-mtd-load-fw.patch deleted file mode 100644 index 532c80080b..0000000000 --- a/target/linux/ixp4xx-2.6/patches/139-ixp4xx-net-driver-mtd-load-fw.patch +++ /dev/null @@ -1,414 +0,0 @@ -Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig -=================================================================== ---- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig -+++ linux-2.6.19/drivers/net/ixp4xx/Kconfig -@@ -11,6 +11,7 @@ config IXP4XX_NPE - tristate "IXP4xx NPE support" - depends on ARCH_IXP4XX - depends on NET_ETHERNET -+ select CRC16 - help - The IXP4XX NPE driver supports the 3 CPU co-processors called - "Network Processing Engines" (NPE). It adds support fo downloading -@@ -18,7 +19,7 @@ config IXP4XX_NPE - More about this at: Documentation/networking/ixp4xx/README. - You can either use this OR the Intel Access Library (IAL) - --config IXP4XX_FW_LOAD -+config IXP4XX_NPE_FW_LOAD - bool "Use Firmware hotplug for Microcode download" - depends on IXP4XX_NPE - select HOTPLUG -@@ -28,6 +29,13 @@ config IXP4XX_FW_LOAD - /usr/lib/hotplug/firmware/NPE-[ABC] - see Documentation/firmware_class/hotplug-script - -+config IXP4XX_NPE_FW_MTD -+ bool "Load firmware from an mtd partition" -+ depends on IXP4XX_NPE && MTD_IXP4XX -+ help -+ With this option, the driver will search for -+ the firmware into an MTD partition. -+ - config IXP4XX_MAC - tristate "IXP4xx MAC support" - depends on IXP4XX_NPE -Index: linux-2.6.19/drivers/net/ixp4xx/Makefile -=================================================================== ---- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile -+++ linux-2.6.19/drivers/net/ixp4xx/Makefile -@@ -1,6 +1,7 @@ - obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o - obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o - obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o -+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o - - ixp4xx_npe-objs := ucode_dl.o npe_mh.o - ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o -Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c -=================================================================== ---- /dev/null -+++ linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c -@@ -0,0 +1,185 @@ -+/* -+ * Provide an NPE platform device for microcode handling -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define DL_MAGIC 0xfeedf00d -+#define DL_MAGIC_SWAP 0x0df0edfe -+ -+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ -+ sizeof(struct dl_image)) -+ -+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) -+#define IMG_REV_MINOR(id) ((id) & 0x0f) -+#define IMG_FUNC(id) (((id) >> 16) & 0xff) -+#define IMG_NPE(id) (((id) >> 24) & 0x0f) -+#define IMG_IXP(id) (((id) >> 28) & 0x0f) -+ -+static struct platform_driver ixp4xx_npe_ucode_driver; -+static unsigned char *partition_name = NULL; -+ -+static void print_image_info(u32 id, u32 offset, u32 size) -+{ -+ unsigned char idx; -+ const char *names[] = { "IXP425", "IXP465", "unknown" }; -+ -+ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2; -+ -+ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, " -+ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A', -+ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id); -+} -+ -+void npe_swap_image(struct dl_image *image) -+{ -+ unsigned int i; -+ -+ image->magic = swab32(image->magic); -+ image->id = swab32(image->id); -+ image->size = swab32(image->size); -+ -+ for (i = 0; i < image->size; i++) -+ image->u.data[i] = swab32(image->u.data[i]); -+} -+ -+static void npe_find_microcode(struct mtd_info *mtd) -+{ -+ u32 buf; -+ u32 magic = htonl(DL_MAGIC); -+ u32 id, size; -+ size_t retlen; -+ int err; -+ unsigned int offset = 0; -+ -+ printk("npe: searching for firmware...\n"); -+ -+ while (offset < mtd->size) { -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf); -+ offset += retlen; -+ -+ if (buf != magic) -+ continue; -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id); -+ offset += retlen; -+ -+ if (id == magic) -+ break; -+ -+ id = ntohl(id); -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size); -+ offset += retlen; -+ -+ size = (ntohl(size) * 4) + 12; -+ -+ print_image_info(id, offset - 12, size); -+ -+ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) ) { // XXX fix size/detection -+ -+ struct dl_image *image = kmalloc(size, GFP_KERNEL); -+ -+ /* we are going to load it, rewind offset */ -+ offset -= 12; -+ -+ if (image) { -+ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image); -+ -+ if (err == 0 && retlen == size) { -+ if (image->magic == DL_MAGIC_SWAP) -+ npe_swap_image(image); -+ -+ store_npe_image(image, NULL); -+ } else { -+ printk(KERN_ERR "unable to read firmware\n"); -+ } -+ -+ kfree(image); -+ } -+ -+ offset += size; -+ } -+ } -+} -+ -+static void npe_flash_add(struct mtd_info *mtd) -+{ -+ if (partition_name == NULL) -+ return; -+ -+ if (strcmp(mtd->name, partition_name) == 0) { -+ npe_find_microcode(mtd); -+ } -+} -+ -+static void npe_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier npe_flash_notifier = { -+ .add = npe_flash_add, -+ .remove = npe_flash_remove, -+}; -+ -+static int npe_ucode_probe(struct platform_device *pdev) -+{ -+ struct npe_ucode_platform_data *data = pdev->dev.platform_data; -+ -+ if (partition_name) -+ return -EEXIST; -+ -+ if (data && data->mtd_partition) { -+ partition_name = data->mtd_partition; -+ return 0; -+ } -+ -+ return -EINVAL; -+} -+ -+static int npe_ucode_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver ixp4xx_npe_ucode_driver = { -+ .driver = { -+ .name = "ixp4xx_npe_ucode", -+ .owner = THIS_MODULE, -+ }, -+ .probe = npe_ucode_probe, -+ .remove = npe_ucode_remove, -+}; -+ -+static int __init npe_ucode_init(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(&ixp4xx_npe_ucode_driver); -+ register_mtd_user(&npe_flash_notifier); -+ -+ return ret; -+} -+ -+static void __exit npe_ucode_exit(void) -+{ -+ unregister_mtd_user(&npe_flash_notifier); -+ platform_driver_unregister(&ixp4xx_npe_ucode_driver); -+} -+ -+module_init(npe_ucode_init); -+module_exit(npe_ucode_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Alessandro Zummo "); -Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c -=================================================================== ---- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c -+++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -30,6 +31,12 @@ - #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ - sizeof(struct dl_image)) - -+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) -+#define IMG_REV_MINOR(id) ((id) & 0x0f) -+#define IMG_FUNC(id) (((id) >> 16) & 0xff) -+#define IMG_NPE(id) (((id) >> 24) & 0x0f) -+#define IMG_IXP(id) (((id) >> 28) & 0x0f) -+ - #define BT_INSTR 0 - #define BT_DATA 1 - -@@ -38,21 +45,6 @@ enum blk_type { - data, - }; - --struct dl_block { -- u32 type; -- u32 offset; --}; -- --struct dl_image { -- u32 magic; -- u32 id; -- u32 size; -- union { -- u32 data[0]; -- struct dl_block block[0]; -- } u; --}; -- - struct dl_codeblock { - u32 npe_addr; - u32 size; -@@ -134,23 +126,41 @@ struct device *get_npe_by_id(int id) - &id, match_by_npeid); - } - --static int store_npe_image(struct dl_image *image, struct device *dev) -+int store_npe_image(struct dl_image *image, struct device *dev) - { - struct dl_block *blk; - struct dl_codeblock *cb; - struct npe_info *npe; -- int ret=0; -+ int ret = 0; -+ u16 crc; - - if (!dev) { -- dev = get_npe_by_id( (image->id >> 24) & 0xf); -- put_device(dev); -+ dev = get_npe_by_id(IMG_NPE(image->id)); -+ if (dev) -+ put_device(dev); -+ // XXX shouldn't this put_device be outside if(!dev) ? -+ else -+ printk(KERN_ERR "npe: cannot find npe for image %x\n", IMG_NPE(image->id)); - } -+ - if (!dev) - return -ENODEV; - -+ if (image->size > 24000) { // XXX fix max size -+ printk(KERN_ERR "npe: firmware too large\n"); -+ return -EFBIG; -+ } -+ -+ if (IMG_REV_MAJOR(image->id) != 2) { -+ printk(KERN_ERR "npe: only revision 2 is supported at this time\n"); -+ return -EINVAL; -+ } -+ -+ crc = crc16(0, (u8 *) image, IMG_SIZE(image)); -+ - npe = dev_get_drvdata(dev); - -- if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { -+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { - printk(KERN_INFO "Cowardly refusing to reload an Image " - "into the running %s\n", npe->plat->name); - return 0; /* indicate success anyway... */ -@@ -173,9 +183,9 @@ static int store_npe_image(struct dl_ima - *(u32*)npe->img_info = cpu_to_be32(image->id); - npe_start(npe); - -- printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n", -+ printk(KERN_INFO "npe: firmware loaded to %s, func: %02x, rev: %x.%x, status: %x, crc: %x\n", - npe->plat->name, npe->img_info[1], npe->img_info[2], -- npe->img_info[3], npe_status(npe)); -+ npe->img_info[3], npe_status(npe), crc); - return 0; - } - -@@ -265,8 +275,7 @@ static ssize_t ucode_write(struct file * - - static void npe_firmware_probe(struct device *dev) - { --#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ -- && defined(MODULE) -+#ifdef CONFIG_IXP4XX_NPE_FW_LOADER - const struct firmware *fw_entry; - struct npe_info *npe = dev_get_drvdata(dev); - struct dl_image *image; -@@ -388,7 +397,7 @@ static int npe_probe(struct platform_dev - - npe->plat = plat; - disable_npe_irq(npe); -- if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) -+ if (!(npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) - npe_firmware_probe(&pdev->dev); - - return 0; -@@ -464,3 +473,4 @@ MODULE_LICENSE("GPL"); - MODULE_AUTHOR("Christian Hohnstaedt "); - - EXPORT_SYMBOL(get_npe_by_id); -+EXPORT_SYMBOL(store_npe_image); -Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h -=================================================================== ---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h -+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h -@@ -86,6 +86,20 @@ struct ixp4xx_i2c_pins { - unsigned long scl_pin; - }; - -+struct dl_block { -+ u32 type; -+ u32 offset; -+}; -+ -+struct dl_image { -+ u32 magic; -+ u32 id; -+ u32 size; -+ union { -+ u32 data[0]; -+ struct dl_block block[0]; -+ } u; -+}; - struct npe_plat_data { - const char *name; - int data_size; -@@ -103,6 +117,9 @@ struct mac_plat_info { - unsigned char hwaddr[6]; /* Desired hardware address */ - }; - -+struct npe_ucode_platform_data { -+ unsigned char *mtd_partition; -+}; - - struct sys_timer; - -Index: linux-2.6.19/include/linux/ixp_npe.h -=================================================================== ---- linux-2.6.19.orig/include/linux/ixp_npe.h -+++ linux-2.6.19/include/linux/ixp_npe.h -@@ -71,6 +71,7 @@ static inline u32 npe_read_ecs_reg(struc - } - - extern struct device *get_npe_by_id(int id); -+extern int store_npe_image(struct dl_image *image, struct device *dev); - - /* NPE Messages */ - extern int diff --git a/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch new file mode 100644 index 0000000000..532c80080b --- /dev/null +++ b/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch @@ -0,0 +1,414 @@ +Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig +=================================================================== +--- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig ++++ linux-2.6.19/drivers/net/ixp4xx/Kconfig +@@ -11,6 +11,7 @@ config IXP4XX_NPE + tristate "IXP4xx NPE support" + depends on ARCH_IXP4XX + depends on NET_ETHERNET ++ select CRC16 + help + The IXP4XX NPE driver supports the 3 CPU co-processors called + "Network Processing Engines" (NPE). It adds support fo downloading +@@ -18,7 +19,7 @@ config IXP4XX_NPE + More about this at: Documentation/networking/ixp4xx/README. + You can either use this OR the Intel Access Library (IAL) + +-config IXP4XX_FW_LOAD ++config IXP4XX_NPE_FW_LOAD + bool "Use Firmware hotplug for Microcode download" + depends on IXP4XX_NPE + select HOTPLUG +@@ -28,6 +29,13 @@ config IXP4XX_FW_LOAD + /usr/lib/hotplug/firmware/NPE-[ABC] + see Documentation/firmware_class/hotplug-script + ++config IXP4XX_NPE_FW_MTD ++ bool "Load firmware from an mtd partition" ++ depends on IXP4XX_NPE && MTD_IXP4XX ++ help ++ With this option, the driver will search for ++ the firmware into an MTD partition. ++ + config IXP4XX_MAC + tristate "IXP4xx MAC support" + depends on IXP4XX_NPE +Index: linux-2.6.19/drivers/net/ixp4xx/Makefile +=================================================================== +--- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile ++++ linux-2.6.19/drivers/net/ixp4xx/Makefile +@@ -1,6 +1,7 @@ + obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o + obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o + obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o ++obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o + + ixp4xx_npe-objs := ucode_dl.o npe_mh.o + ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o +Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c +=================================================================== +--- /dev/null ++++ linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c +@@ -0,0 +1,185 @@ ++/* ++ * Provide an NPE platform device for microcode handling ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DL_MAGIC 0xfeedf00d ++#define DL_MAGIC_SWAP 0x0df0edfe ++ ++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ ++ sizeof(struct dl_image)) ++ ++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) ++#define IMG_REV_MINOR(id) ((id) & 0x0f) ++#define IMG_FUNC(id) (((id) >> 16) & 0xff) ++#define IMG_NPE(id) (((id) >> 24) & 0x0f) ++#define IMG_IXP(id) (((id) >> 28) & 0x0f) ++ ++static struct platform_driver ixp4xx_npe_ucode_driver; ++static unsigned char *partition_name = NULL; ++ ++static void print_image_info(u32 id, u32 offset, u32 size) ++{ ++ unsigned char idx; ++ const char *names[] = { "IXP425", "IXP465", "unknown" }; ++ ++ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2; ++ ++ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, " ++ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A', ++ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id); ++} ++ ++void npe_swap_image(struct dl_image *image) ++{ ++ unsigned int i; ++ ++ image->magic = swab32(image->magic); ++ image->id = swab32(image->id); ++ image->size = swab32(image->size); ++ ++ for (i = 0; i < image->size; i++) ++ image->u.data[i] = swab32(image->u.data[i]); ++} ++ ++static void npe_find_microcode(struct mtd_info *mtd) ++{ ++ u32 buf; ++ u32 magic = htonl(DL_MAGIC); ++ u32 id, size; ++ size_t retlen; ++ int err; ++ unsigned int offset = 0; ++ ++ printk("npe: searching for firmware...\n"); ++ ++ while (offset < mtd->size) { ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf); ++ offset += retlen; ++ ++ if (buf != magic) ++ continue; ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id); ++ offset += retlen; ++ ++ if (id == magic) ++ break; ++ ++ id = ntohl(id); ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size); ++ offset += retlen; ++ ++ size = (ntohl(size) * 4) + 12; ++ ++ print_image_info(id, offset - 12, size); ++ ++ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) ) { // XXX fix size/detection ++ ++ struct dl_image *image = kmalloc(size, GFP_KERNEL); ++ ++ /* we are going to load it, rewind offset */ ++ offset -= 12; ++ ++ if (image) { ++ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image); ++ ++ if (err == 0 && retlen == size) { ++ if (image->magic == DL_MAGIC_SWAP) ++ npe_swap_image(image); ++ ++ store_npe_image(image, NULL); ++ } else { ++ printk(KERN_ERR "unable to read firmware\n"); ++ } ++ ++ kfree(image); ++ } ++ ++ offset += size; ++ } ++ } ++} ++ ++static void npe_flash_add(struct mtd_info *mtd) ++{ ++ if (partition_name == NULL) ++ return; ++ ++ if (strcmp(mtd->name, partition_name) == 0) { ++ npe_find_microcode(mtd); ++ } ++} ++ ++static void npe_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier npe_flash_notifier = { ++ .add = npe_flash_add, ++ .remove = npe_flash_remove, ++}; ++ ++static int npe_ucode_probe(struct platform_device *pdev) ++{ ++ struct npe_ucode_platform_data *data = pdev->dev.platform_data; ++ ++ if (partition_name) ++ return -EEXIST; ++ ++ if (data && data->mtd_partition) { ++ partition_name = data->mtd_partition; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static int npe_ucode_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static struct platform_driver ixp4xx_npe_ucode_driver = { ++ .driver = { ++ .name = "ixp4xx_npe_ucode", ++ .owner = THIS_MODULE, ++ }, ++ .probe = npe_ucode_probe, ++ .remove = npe_ucode_remove, ++}; ++ ++static int __init npe_ucode_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(&ixp4xx_npe_ucode_driver); ++ register_mtd_user(&npe_flash_notifier); ++ ++ return ret; ++} ++ ++static void __exit npe_ucode_exit(void) ++{ ++ unregister_mtd_user(&npe_flash_notifier); ++ platform_driver_unregister(&ixp4xx_npe_ucode_driver); ++} ++ ++module_init(npe_ucode_init); ++module_exit(npe_ucode_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Alessandro Zummo "); +Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c +=================================================================== +--- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c ++++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -30,6 +31,12 @@ + #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ + sizeof(struct dl_image)) + ++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) ++#define IMG_REV_MINOR(id) ((id) & 0x0f) ++#define IMG_FUNC(id) (((id) >> 16) & 0xff) ++#define IMG_NPE(id) (((id) >> 24) & 0x0f) ++#define IMG_IXP(id) (((id) >> 28) & 0x0f) ++ + #define BT_INSTR 0 + #define BT_DATA 1 + +@@ -38,21 +45,6 @@ enum blk_type { + data, + }; + +-struct dl_block { +- u32 type; +- u32 offset; +-}; +- +-struct dl_image { +- u32 magic; +- u32 id; +- u32 size; +- union { +- u32 data[0]; +- struct dl_block block[0]; +- } u; +-}; +- + struct dl_codeblock { + u32 npe_addr; + u32 size; +@@ -134,23 +126,41 @@ struct device *get_npe_by_id(int id) + &id, match_by_npeid); + } + +-static int store_npe_image(struct dl_image *image, struct device *dev) ++int store_npe_image(struct dl_image *image, struct device *dev) + { + struct dl_block *blk; + struct dl_codeblock *cb; + struct npe_info *npe; +- int ret=0; ++ int ret = 0; ++ u16 crc; + + if (!dev) { +- dev = get_npe_by_id( (image->id >> 24) & 0xf); +- put_device(dev); ++ dev = get_npe_by_id(IMG_NPE(image->id)); ++ if (dev) ++ put_device(dev); ++ // XXX shouldn't this put_device be outside if(!dev) ? ++ else ++ printk(KERN_ERR "npe: cannot find npe for image %x\n", IMG_NPE(image->id)); + } ++ + if (!dev) + return -ENODEV; + ++ if (image->size > 24000) { // XXX fix max size ++ printk(KERN_ERR "npe: firmware too large\n"); ++ return -EFBIG; ++ } ++ ++ if (IMG_REV_MAJOR(image->id) != 2) { ++ printk(KERN_ERR "npe: only revision 2 is supported at this time\n"); ++ return -EINVAL; ++ } ++ ++ crc = crc16(0, (u8 *) image, IMG_SIZE(image)); ++ + npe = dev_get_drvdata(dev); + +- if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { ++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { + printk(KERN_INFO "Cowardly refusing to reload an Image " + "into the running %s\n", npe->plat->name); + return 0; /* indicate success anyway... */ +@@ -173,9 +183,9 @@ static int store_npe_image(struct dl_ima + *(u32*)npe->img_info = cpu_to_be32(image->id); + npe_start(npe); + +- printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n", ++ printk(KERN_INFO "npe: firmware loaded to %s, func: %02x, rev: %x.%x, status: %x, crc: %x\n", + npe->plat->name, npe->img_info[1], npe->img_info[2], +- npe->img_info[3], npe_status(npe)); ++ npe->img_info[3], npe_status(npe), crc); + return 0; + } + +@@ -265,8 +275,7 @@ static ssize_t ucode_write(struct file * + + static void npe_firmware_probe(struct device *dev) + { +-#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ +- && defined(MODULE) ++#ifdef CONFIG_IXP4XX_NPE_FW_LOADER + const struct firmware *fw_entry; + struct npe_info *npe = dev_get_drvdata(dev); + struct dl_image *image; +@@ -388,7 +397,7 @@ static int npe_probe(struct platform_dev + + npe->plat = plat; + disable_npe_irq(npe); +- if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) ++ if (!(npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) + npe_firmware_probe(&pdev->dev); + + return 0; +@@ -464,3 +473,4 @@ MODULE_LICENSE("GPL"); + MODULE_AUTHOR("Christian Hohnstaedt "); + + EXPORT_SYMBOL(get_npe_by_id); ++EXPORT_SYMBOL(store_npe_image); +Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h +=================================================================== +--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h ++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h +@@ -86,6 +86,20 @@ struct ixp4xx_i2c_pins { + unsigned long scl_pin; + }; + ++struct dl_block { ++ u32 type; ++ u32 offset; ++}; ++ ++struct dl_image { ++ u32 magic; ++ u32 id; ++ u32 size; ++ union { ++ u32 data[0]; ++ struct dl_block block[0]; ++ } u; ++}; + struct npe_plat_data { + const char *name; + int data_size; +@@ -103,6 +117,9 @@ struct mac_plat_info { + unsigned char hwaddr[6]; /* Desired hardware address */ + }; + ++struct npe_ucode_platform_data { ++ unsigned char *mtd_partition; ++}; + + struct sys_timer; + +Index: linux-2.6.19/include/linux/ixp_npe.h +=================================================================== +--- linux-2.6.19.orig/include/linux/ixp_npe.h ++++ linux-2.6.19/include/linux/ixp_npe.h +@@ -71,6 +71,7 @@ static inline u32 npe_read_ecs_reg(struc + } + + extern struct device *get_npe_by_id(int id); ++extern int store_npe_image(struct dl_image *image, struct device *dev); + + /* NPE Messages */ + extern int diff --git a/target/linux/ixp4xx-2.6/patches/152-nas100d-mtd_load_mac.patch b/target/linux/ixp4xx-2.6/patches/152-nas100d-mtd_load_mac.patch deleted file mode 100644 index 37368861bd..0000000000 --- a/target/linux/ixp4xx-2.6/patches/152-nas100d-mtd_load_mac.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- - arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d - &nas100d_npe_ucode, - }; - -+static void nas100d_flash_add(struct mtd_info *mtd) -+{ -+ if (strcmp(mtd->name, "RedBoot config") == 0) { -+ size_t retlen; -+ u_char mac[6]; -+ -+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) { -+ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ memcpy(plat_mac0.hwaddr, mac, 6); -+ } else { -+ printk(KERN_ERR "nas100d mac: read failed\n"); -+ } -+ } -+} -+ -+static void nas100d_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier nas100d_flash_notifier = { -+ .add = nas100d_flash_add, -+ .remove = nas100d_flash_remove, -+}; -+ - static void nas100d_power_off(void) - { - /* This causes the box to drop the power and go dead. */ -@@ -196,6 +221,8 @@ static void __init nas100d_init(void) - (void)platform_device_register(&nas100d_uart); - - platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); -+ -+ register_mtd_user(&nas100d_flash_notifier); - } - - MACHINE_START(NAS100D, "Iomega NAS 100d") diff --git a/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch b/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch new file mode 100644 index 0000000000..37368861bd --- /dev/null +++ b/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch @@ -0,0 +1,56 @@ +--- + arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d + &nas100d_npe_ucode, + }; + ++static void nas100d_flash_add(struct mtd_info *mtd) ++{ ++ if (strcmp(mtd->name, "RedBoot config") == 0) { ++ size_t retlen; ++ u_char mac[6]; ++ ++ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) { ++ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ memcpy(plat_mac0.hwaddr, mac, 6); ++ } else { ++ printk(KERN_ERR "nas100d mac: read failed\n"); ++ } ++ } ++} ++ ++static void nas100d_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier nas100d_flash_notifier = { ++ .add = nas100d_flash_add, ++ .remove = nas100d_flash_remove, ++}; ++ + static void nas100d_power_off(void) + { + /* This causes the box to drop the power and go dead. */ +@@ -196,6 +221,8 @@ static void __init nas100d_init(void) + (void)platform_device_register(&nas100d_uart); + + platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); ++ ++ register_mtd_user(&nas100d_flash_notifier); + } + + MACHINE_START(NAS100D, "Iomega NAS 100d")