From: INAGAKI Hiroshi Date: Thu, 26 Jul 2018 14:24:22 +0000 (+0900) Subject: ramips: add support for ELECOM WRC-2533GST X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce93445cd6058ae37ca3d257792f68cd98e758da;p=openwrt%2Fstaging%2Fblocktrron.git ramips: add support for ELECOM WRC-2533GST ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - MT7621A (2-Core, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 4T4R 2.4/5 GHz wifi - MediaTek MT7615 - 5x 10/100/1000 Mbps Ethernet - 4x LEDs, 6 keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-2533GST 2. Connect power cable to WRC-2533GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 818a919f41..7d5f09c35c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -232,6 +232,7 @@ ramips_setup_interfaces() ;; dir-860l-b1|\ elecom,wrc-1167ghbk2-s|\ + elecom,wrc-2533gst|\ iodata,wn-ax1167gr|\ iodata,wn-gx300gr) ucidef_add_switch "switch0" \ @@ -466,6 +467,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; elecom,wrc-1167ghbk2-s|\ + elecom,wrc-2533gst|\ sk-wb8) wan_mac=$(mtd_get_mac_binary factory 57350) ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a7f9c1722e..e3f8e606c2 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -55,6 +55,7 @@ platform_check_image() { duzun-dm06|\ e1700|\ elecom,wrc-1167ghbk2-s|\ + elecom,wrc-2533gst|\ esr-9753|\ ew1200|\ ex2700|\ diff --git a/target/linux/ramips/dts/WRC-2533GST.dts b/target/linux/ramips/dts/WRC-2533GST.dts new file mode 100644 index 0000000000..551da5f83f --- /dev/null +++ b/target/linux/ramips/dts/WRC-2533GST.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "elecom,wrc-2533gst", "mediatek,mt7621-soc"; + model = "ELECOM WRC-2533GST"; + + aliases { + led-status = &led_power_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_power_green: power_green { + label = "wrc-2533gst:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + power_blue { + label = "wrc-2533gst:blue:power"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "wrc-2533gst:red:wps"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + power_red { + label = "wrc-2533gst:red:power"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + client { + label = "client"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + ap { + label = "ap"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + extender { + label = "extender"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + router { + label = "router"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xb00000>; + }; + + partition@b50000 { + label = "tm_pattern"; + reg = <0xb50000 0x380000>; + read-only; + }; + + partition@ed0000 { + label = "tm_key"; + reg = <0xed0000 0x80000>; + read-only; + }; + + partition@f50000 { + label = "art_block"; + reg = <0xf50000 0x30000>; + read-only; + }; + + partition@f80000 { + label = "user_data"; + reg = <0xf80000 0x80000>; + read-only; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart3", "jtag", "wdt", "sdhci"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; + // WRC-2533GST has MT7615 for 2.4/5 GHz wifi, + // but it's not supported in OpenWrt. +}; + +&xhci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 8ac78ad7de..b427ff4f25 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -4,6 +4,19 @@ DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV +define Build/elecom-gst-factory + $(eval product=$(word 1,$(1))) + $(eval version=$(word 2,$(1))) + ( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@ + ( \ + echo -n "ELECOM $(product) v$(version)" | \ + dd bs=32 count=1 conv=sync; \ + dd if=$@; \ + ) > $@.new + mv $@.new $@ + echo -n "MT7621_ELECOM_$(product)" >> $@ +endef + define Build/elecom-wrc-factory $(eval product=$(word 1,$(1))) $(eval version=$(word 2,$(1))) @@ -104,6 +117,16 @@ define Device/elecom_wrc-1167ghbk2-s endef TARGET_DEVICES += elecom_wrc-1167ghbk2-s +define Device/elecom_wrc-2533gst + DTS := WRC-2533GST + IMAGE_SIZE := 11264k + DEVICE_TITLE := ELECOM WRC-2533GST + IMAGES += factory.bin + IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\ + elecom-gst-factory WRC-2533GST 0.00 +endef +TARGET_DEVICES += elecom_wrc-2533gst + define Device/ew1200 DTS := EW1200 IMAGE_SIZE := $(ralink_default_fw_size_16M)