From: Stijn Tintel Date: Tue, 17 May 2022 14:57:07 +0000 (+0300) Subject: ramips: use hotplug script for EAP615-Wall MACs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce90ba1f3168e3f4581fd8581e2c0cd31efa14cf;p=openwrt%2Fstaging%2Fthess.git ramips: use hotplug script for EAP615-Wall MACs Using nvmem-cells to set the MAC address for a DBDC device results in both PHY devices using the same MAC address. This in turn will result in multiple BSSes using the same BSSID, which can cause various problems. Use the hotplug script for the EAP615-Wall instead to avoid this. Fixes: a1b8a4d7b3ff ("ramips: support TP-Link EAP615-Wall") Signed-off-by: Stijn Tintel Tested-by: Stijn Segers Tested-By: Andrew Powers-Holmes --- diff --git a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts index a0c3912d8e..0be4af39e8 100644 --- a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts +++ b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts @@ -144,8 +144,6 @@ compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&radio 0x0>; - nvmem-cells = <&macaddr_info_8>; - nvmem-cell-names = "mac-address"; }; }; diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index a35e9dcc28..5b12416872 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -90,6 +90,10 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress ;; + tplink,eap615-wall-v1) + hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)" + macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress" + ;; yuncore,ax820) [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress