From: Guan Ben Date: Tue, 7 Feb 2017 05:22:04 +0000 (+0100) Subject: NFC: Make EN2 pin optional in the TRF7970A driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce69b95ca4e459f54b5afad717d2129d3ba1ff6e;p=openwrt%2Fstaging%2Fblogic.git NFC: Make EN2 pin optional in the TRF7970A driver Make the EN2 pin optional. This is useful for boards, which have this pin fix wired, for example to ground. Acked-by: Rob Herring Signed-off-by: Guan Ben Signed-off-by: Mark Jonas Signed-off-by: Heiko Schocher Signed-off-by: Samuel Ortiz --- diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 32b35a07abe4..5889a3d133b2 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -5,8 +5,8 @@ Required properties: - spi-max-frequency: Maximum SPI frequency (<= 2000000). - interrupt-parent: phandle of parent interrupt handler. - interrupts: A single interrupt specifier. -- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the - TRF7970A. +- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the + TRF7970A. EN2 is optional. - vin-supply: Regulator for supply voltage to VIN pin Optional SoC Specific Properties: diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 26c9dbbccb0c..75079fb16f22 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -1885,8 +1885,10 @@ static int trf7970a_power_up(struct trf7970a *trf) usleep_range(5000, 6000); if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) { - gpio_set_value(trf->en2_gpio, 1); - usleep_range(1000, 2000); + if (gpio_is_valid(trf->en2_gpio)) { + gpio_set_value(trf->en2_gpio, 1); + usleep_range(1000, 2000); + } } gpio_set_value(trf->en_gpio, 1); @@ -1914,7 +1916,8 @@ static int trf7970a_power_down(struct trf7970a *trf) } gpio_set_value(trf->en_gpio, 0); - gpio_set_value(trf->en2_gpio, 0); + if (gpio_is_valid(trf->en2_gpio)) + gpio_set_value(trf->en2_gpio, 0); ret = regulator_disable(trf->regulator); if (ret) @@ -2032,15 +2035,14 @@ static int trf7970a_probe(struct spi_device *spi) trf->en2_gpio = of_get_named_gpio(np, "ti,enable-gpios", 1); if (!gpio_is_valid(trf->en2_gpio)) { - dev_err(trf->dev, "No EN2 GPIO property\n"); - return trf->en2_gpio; - } - - ret = devm_gpio_request_one(trf->dev, trf->en2_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN2"); - if (ret) { - dev_err(trf->dev, "Can't request EN2 GPIO: %d\n", ret); - return ret; + dev_info(trf->dev, "No EN2 GPIO property\n"); + } else { + ret = devm_gpio_request_one(trf->dev, trf->en2_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN2"); + if (ret) { + dev_err(trf->dev, "Can't request EN2 GPIO: %d\n", ret); + return ret; + } } if (of_property_read_bool(np, "en2-rf-quirk"))