From: Jonas Gorski <jogo@openwrt.org>
Date: Sat, 22 Feb 2014 11:16:38 +0000 (+0000)
Subject: brcm63xx: add support for Asmax AR 1004g router
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce655b93cdd7b95dbe49056ed32a3f39d6c10506;p=openwrt%2Fstaging%2Fynezz.git

brcm63xx: add support for Asmax AR 1004g router

Support for Asmax AR 1004g router

Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39674
---

diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 087bce960d..b4ab46d56b 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -28,6 +28,7 @@ SPW500V)
 96338W2_E7T |\
 96348A-122 |\
 96348W3 |\
+AR1004G |\
 CPVA642 |\
 CT536_CT5621 |\
 CT6373-1 |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index afe9624933..1d9b448b75 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -57,6 +57,10 @@ brcm63xx_detect() {
 		brcm63xx_has_reset_button="true"
 		ifname=eth1
 		;;
+	AR1004G)
+		status_led="AR1004G:green:power"
+		brcm63xx_has_reset_button="true"
+		;;
 	CVG834G_E15R3921)
 		status_led="CVG834G:green:power"
 		ifname=eth0
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index e0bcb07d61..ecdcecaaa3 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -190,6 +190,8 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
 	$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
 
+	# Asmax AR 1004g
+	$(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G)
 	# BT Voyager V210_BTR
 	$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
 	# BT Voyager V210_ROI, V210_WB
diff --git a/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch
new file mode 100644
index 0000000000..4fb76ed29f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch
@@ -0,0 +1,70 @@
+From: "mexit@o2.pl" <mexit@o2.pl>
+Date: Sun, 24 Nov 2013 21:33:38 +0000
+Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
+
+Support for Asmax AR 1004g router
+
+Signed-off-by: Adrian Feliks <mexit@o2.pl>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2208,6 +2208,51 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++	.name				= "AR1004G",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++	
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "AR1004G:green:inet",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AR1004G:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AR1004G:red:power",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ #endif
+ 
+ /*
+@@ -4457,6 +4502,7 @@ static const struct board_info __initcon
+ 	&board_96348A_122,
+ 	&board_CPVA502plus,
+ 	&board_96348W3,
++	&board_96348gw_10_AR1004G,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index 7ed27a6211..620bf40021 100644
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -4499,7 +4500,7 @@ static const struct board_info __initcon
+@@ -4545,7 +4546,7 @@ static const struct board_info __initcon
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -4519,6 +4520,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4565,6 +4566,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };