From: Ben Dooks Date: Tue, 21 Oct 2008 13:06:26 +0000 (+0100) Subject: [ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce46a9c497ed788146449c230765ee5d6dd3cb53;p=openwrt%2Fstaging%2Fblogic.git [ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410 Split the map.h definitions into common S3C24XX code by adding arch/arm/plat-s3c24xx/include/plat/map.h and altering the machine specific header for the S3C24A0. As we add a new we move the original one in arch/arm/plat-s3c include directory to be called map-base.h to distinguish the two files. Signed-off-by: Ben Dooks --- diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 6e08594d7162..6b30361a0805 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -13,34 +13,20 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H +#include #include #define S3C2410_ADDR(x) S3C_ADDR(x) -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) -#define S3C24XX_SZ_USBHOST SZ_1M /* DMA controller */ #define S3C2410_PA_DMA (0x4B000000) #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS #define S3C2410_PA_CLKPWR (0x4C000000) -#define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ #define S3C2410_PA_LCD (0x4D000000) @@ -48,48 +34,12 @@ /* NAND flash controller */ #define S3C2410_PA_NAND (0x4E000000) -#define S3C24XX_SZ_NAND SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M /* IIC hardware controller */ #define S3C2410_PA_IIC (0x54000000) -#define S3C24XX_SZ_IIC SZ_1M /* IIS controller */ #define S3C2410_PA_IIS (0x55000000) -#define S3C24XX_SZ_IIS SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M /* RTC */ #define S3C2410_PA_RTC (0x57000000) @@ -97,15 +47,12 @@ /* ADC */ #define S3C2410_PA_ADC (0x58000000) -#define S3C24XX_SZ_ADC SZ_1M /* SPI */ #define S3C2410_PA_SPI (0x59000000) -#define S3C24XX_SZ_SPI SZ_1M /* SDI */ #define S3C2410_PA_SDI (0x5A000000) -#define S3C24XX_SZ_SDI SZ_1M /* CAMIF */ #define S3C2440_PA_CAMIF (0x4F000000) @@ -120,13 +67,6 @@ #define S3C2443_PA_HSMMC (0x4A800000) #define S3C2443_SZ_HSMMC (256) -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - /* physical addresses of all the chip-select areas */ #define S3C2410_CS0 (0x00000000) @@ -158,21 +98,7 @@ #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif +#define S3C24XX_PA_SDI S3C2410_PA_SDI +#define S3C24XX_PA_NAND S3C2410_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h index 65a146fd78ec..2ce1839de4ee 100644 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ b/arch/arm/mach-s3c24a0/include/mach/map.h @@ -14,6 +14,9 @@ #ifndef __ASM_ARCH_24A0_MAP_H #define __ASM_ARCH_24A0_MAP_H __FILE__ +#include +#include + #define S3C24A0_PA_IO_BASE (0x40000000) #define S3C24A0_PA_CLKPWR (0x40000000) #define S3C24A0_PA_IRQ (0x40200000) @@ -74,5 +77,7 @@ #define S3C24XX_PA_RTC S3C24A0_PA_RTC #define S3C24XX_PA_ADC S3C24A0_PA_ADC #define S3C24XX_PA_SPI S3C24A0_PA_SPI +#define S3C24XX_PA_SDI S3C24A0_PA_SDI +#define S3C24XX_PA_NAND S3C24A0_PA_NAND #endif /* __ASM_ARCH_24A0_MAP_H */ diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h new file mode 100644 index 000000000000..b84289d32a54 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/map-base.h @@ -0,0 +1,40 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ +#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map.h deleted file mode 100644 index b84289d32a54..000000000000 --- a/arch/arm/plat-s3c/include/plat/map.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/map.h - * - * Copyright 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C - Memory map definitions (virtual addresses) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_MAP_H -#define __ASM_PLAT_MAP_H __FILE__ - -/* Fit all our registers in at 0xF4000000 upwards, trying to use as - * little of the VA space as possible so vmalloc and friends have a - * better chance of getting memory. - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - */ - -#define S3C_ADDR_BASE (0xF4000000) - -#ifndef __ASSEMBLY__ -#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) -#else -#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) -#endif - -#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ -#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ -#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ -#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ -#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ -#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ - -#endif /* __ASM_PLAT_MAP_H */ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index adf535aaf43a..ea445850ff47 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -192,8 +192,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) static struct resource s3c_nand_resource[] = { [0] = { - .start = S3C2410_PA_NAND, - .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1, + .start = S3C24XX_PA_NAND, + .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1, .flags = IORESOURCE_MEM, } }; @@ -382,8 +382,8 @@ struct platform_device s3c_device_adc = { static struct resource s3c_sdi_resource[] = { [0] = { - .start = S3C2410_PA_SDI, - .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, + .start = S3C24XX_PA_SDI, + .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h new file mode 100644 index 000000000000..6222ba8341d4 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -0,0 +1,99 @@ +/* linux/include/asm-arm/plat-s3c24xx/map.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S3C24XX_MAP_H +#define __ASM_PLAT_S3C24XX_MAP_H + +/* interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C24XX_VA_UART S3C_VA_UART +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_SZ_UART SZ_1M + +/* Timers */ +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_IIC SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_USBHOST SZ_1M + +/* GPIO ports */ + +/* the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 maping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C24XX_SZ_GPIO SZ_1M + + +/* ISA style IO, for each machine to sort out mappings for, if it + * implements it. We reserve two 16M regions for ISA. + */ + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#endif /* __ASM_PLAT_S3C24XX_MAP_H */