From: Tang Yuantian <yuantian.tang@freescale.com>
Date: Wed, 23 Jul 2014 09:27:53 +0000 (+0800)
Subject: powerpc/t104xrdb: support deep sleep in SPI/SD boot
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ce249d956c820af4b9790406461b1748741d0478;p=project%2Fbcm63xx%2Fu-boot.git

powerpc/t104xrdb: support deep sleep in SPI/SD boot

Add deep sleep support in SPI/SD boot. The destination address
second stage uboot image is loaded to is changed because
currently this address will be used by kernel which means
we can't reserve it for resume.

Entry point to kernel is still placed in second stage uboot.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 3665ec6b6c..3222e26a5a 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -134,6 +134,21 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 			printf("Failed to reserve memory for spin table: %s\n",
 				fdt_strerror(off));
 	}
+#ifdef CONFIG_DEEP_SLEEP
+#ifdef CONFIG_SPL_MMC_BOOT
+	off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START,
+		CONFIG_SYS_MMC_U_BOOT_SIZE);
+	if (off < 0)
+		printf("Failed to reserve memory for SD deep sleep: %s\n",
+		       fdt_strerror(off));
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START,
+		CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE);
+	if (off < 0)
+		printf("Failed to reserve memory for SPI deep sleep: %s\n",
+		       fdt_strerror(off));
+#endif
+#endif
 }
 #endif
 
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
index c628c95f2d..3822a37738 100644
--- a/board/freescale/t104xrdb/spl.c
+++ b/board/freescale/t104xrdb/spl.c
@@ -11,6 +11,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <spi_flash.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -55,6 +56,11 @@ void board_init_f(ulong bootflag)
 	/* Update GD pointer */
 	gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
 
+#ifdef CONFIG_DEEP_SLEEP
+	/* disable the console if boot from deep sleep */
+	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
+		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+#endif
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("" : : : "memory");
 
@@ -120,3 +126,16 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	nand_boot();
 #endif
 }
+
+#ifdef CONFIG_DEEP_SLEEP
+void board_mem_sleep_setup(void)
+{
+	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(cpld_base + 0x17, 0x40);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 89e20b1a31..0ee0ff242d 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -32,7 +32,7 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
-#define CONFIG_SYS_TEXT_BASE		0x00201000
+#define CONFIG_SYS_TEXT_BASE		0x30001000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
 #define CONFIG_SPL_MAX_SIZE		0x28000
@@ -48,21 +48,21 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
+#define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x200FFC
+#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x00200000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(256 << 10)
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -72,12 +72,12 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x200FFC
+#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST	(0x00200000)
-#define CONFIG_SYS_MMC_U_BOOT_START	(0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_DST	(0x30000000)
+#define CONFIG_SYS_MMC_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(260 << 10)
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD