From: Tony Ambardar Date: Thu, 1 Dec 2022 04:10:59 +0000 (-0800) Subject: ipq40xx: re-enable EA6350v3, EA8300, MR8300 builds X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cda6f1c832f96bd24e5398e156a0e8d639c691a0;p=openwrt%2Fstaging%2Fnbd.git ipq40xx: re-enable EA6350v3, EA8300, MR8300 builds Raise the kernel size from 3 MB to 5 MB for EA6350v3, EA8300 and MR8300, and correspondingly reduce the rootfs size by 2 MB: * modify partition definitions in related .dts files * modify device kernel/image sizes in generic.mk Update to compat-version 2.0 to force factory image usage on sysupgrade, noting the current version 1.1 is an unreleased update for DSA migration. Also update the compat-version message, explaining the need to run one of the following console commands to update U-Boot's kernel-size variable before flashing the OpenWrt factory image. fw_setenv kernsize 500000 # (OpenWrt command line) setenv kernsize 500000 ; saveenv # (U-Boot serial console) Finally, re-enable the 3 devices. Reviewed-by: Robert Marko Tested-by: Nicolas TORMO # MR8300 Tested-by: Tony Ambardar # EA6350v3 Signed-off-by: Tony Ambardar --- diff --git a/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version index 44873b9df4..c011920897 100644 --- a/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version +++ b/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version @@ -1,6 +1,9 @@ . /lib/functions.sh case "$(board_name)" in +linksys,ea6350v3|\ +linksys,ea8300|\ +linksys,mr8300|\ ezviz,cs-w3-wd1200g-eup) uci set system.@system[0].compat_version="2.0" uci commit system diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts index 75b556a7f9..cd5b4c6ccc 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts @@ -269,17 +269,17 @@ label = "kernel"; reg = <0x00000000 0x02800000>; }; - rootfs@300000 { + rootfs@500000 { label = "rootfs"; - reg = <0x00300000 0x02500000>; + reg = <0x00500000 0x02300000>; }; alt_kernel@2800000 { label = "alt_kernel"; reg = <0x02800000 0x02800000>; }; - alt_rootfs@2b00000 { + alt_rootfs@2d00000 { label = "alt_rootfs"; - reg = <0x02b00000 0x02500000>; + reg = <0x02d00000 0x02300000>; }; sysdiag@5000000 { label = "sysdiag"; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi index 4f2cf1f516..51a37290a0 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi @@ -195,9 +195,9 @@ reg = <0x780000 0x5800000>; }; - partition@a80000 { + partition@c80000 { label = "rootfs"; - reg = <0xa80000 0x5500000>; + reg = <0xc80000 0x5300000>; }; partition@5f80000 { @@ -205,9 +205,9 @@ reg = <0x5f80000 0x5800000>; }; - partition@6280000 { + partition@6480000 { label = "alt_rootfs"; - reg = <0x6280000 0x5500000>; + reg = <0x6480000 0x5300000>; }; partition@b780000 { diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 5dae52ff0e..e17db37d82 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -637,74 +637,86 @@ endef # Missing DSA Setup #TARGET_DEVICES += glinet_gl-s1300 +define Device/kernel-size-6350-8300 + DEVICE_COMPAT_VERSION := 2.0 + DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \ + this OpenWrt version. Before continuing, you MUST issue either the \ + command "fw_setenv kernsize 500000" from the OpenWrt command line, \ + or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \ + Instead of the sysupgrade image, you must then install the OpenWrt \ + factory image, setting the force flag and wiping the configuration. \ + (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line) +endef + define Device/linksys_ea6350v3 # The Linksys EA6350v3 has a uboot bootloader that does not # support either booting lzma kernel images nor booting UBI # partitions. This uboot, however, supports raw kernel images and # gzipped images. # - # As for the time of writing this, the device will boot the kernel - # from a fixed address with a fixed length of 3MiB. Also, the - # device has a hard-coded kernel command line that requieres the + # As configured by the OEM factory, the device will boot the kernel + # from a fixed address with a fixed length of 3 MiB. Also, the + # device has a hard-coded kernel command line that requires the # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively. # Oh... and the kernel partition overlaps with the rootfs # partition (the same for alt_kernel and alt_rootfs). # # If you are planing re-partitioning the device, you may want to - # keep those details in mind: - # 1. The kernel adresses you should honor are 0x00000000 and + # keep these details in mind: + # 1. The kernel addresses you should honor are 0x00000000 and # 0x02800000 respectively. - # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size. + # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size + # unless the uboot environment variable "kernsize" is increased. # 3. You can use 'zImage', but not a raw 'Image' packed with lzma. # 4. The kernel command line from uboot is harcoded to boot with # rootfs either in mtd11 or mtd13. $(call Device/FitzImage) + $(call Device/kernel-size-6350-8300) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA6350 DEVICE_VARIANT := v3 SOC := qcom-ipq4018 BLOCKSIZE := 128k PAGESIZE := 2048 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 37888k + KERNEL_SIZE := 5120k + IMAGE_SIZE := 35840k UBINIZE_OPTS := -E 5 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3 - DEFAULT := n endef TARGET_DEVICES += linksys_ea6350v3 define Device/linksys_ea8300 $(call Device/FitzImage) + $(call Device/kernel-size-6350-8300) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA8300 SOC := qcom-ipq4019 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 87040k + KERNEL_SIZE := 5120k + IMAGE_SIZE := 84992k BLOCKSIZE := 128k PAGESIZE := 2048 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport - DEFAULT := n endef TARGET_DEVICES += linksys_ea8300 define Device/linksys_mr8300 $(call Device/FitzImage) + $(call Device/kernel-size-6350-8300) DEVICE_VENDOR := Linksys DEVICE_MODEL := MR8300 SOC := qcom-ipq4019 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 87040k + KERNEL_SIZE := 5120k + IMAGE_SIZE := 84992k BLOCKSIZE := 128k PAGESIZE := 2048 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport - DEFAULT := n endef TARGET_DEVICES += linksys_mr8300