From: Birger Koblitz Date: Mon, 27 Sep 2021 18:57:29 +0000 (+0200) Subject: realtek: add legacy realtek GPIO driver for rtl9300 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cda0460ad333f15e15ec9bd2516b2ae45f8a4644;p=openwrt%2Fstaging%2Fblogic.git realtek: add legacy realtek GPIO driver for rtl9300 support The otto GPIO driver does not work with rtl9300 SoCs. Add the legacy driver again and use that by default in the 9300 .dtsi Signed-off-by: Birger Koblitz --- diff --git a/target/linux/realtek/config-5.10 b/target/linux/realtek/config-5.10 index 727196e112f1..2c5ab1706a2c 100644 --- a/target/linux/realtek/config-5.10 +++ b/target/linux/realtek/config-5.10 @@ -72,6 +72,7 @@ CONFIG_GPIOLIB_IRQCHIP=y CONFIG_GPIO_GENERIC=y CONFIG_GPIO_REALTEK_OTTO=y CONFIG_GPIO_RTL8231=y +CONFIG_GPIO_RTL838X=y CONFIG_GRO_CELLS=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDWARE_WATCHPOINTS=y diff --git a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h index 0abfc6f4d2ae..ecec0fec2dce 100644 --- a/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h +++ b/target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h @@ -214,6 +214,13 @@ #define RTL838X_GPIO_PAB_IMR (GPIO_CTRL_REG_BASE + 0x14) #define RTL838X_GPIO_PC_IMR (GPIO_CTRL_REG_BASE + 0x18) +#define RTL930X_GPIO_CTRL_REG_BASE ((volatile void *) 0xb8003300) +#define RTL930X_GPIO_PABCD_DIR (RTL930X_GPIO_CTRL_REG_BASE + 0x8) +#define RTL930X_GPIO_PABCD_DAT (RTL930X_GPIO_CTRL_REG_BASE + 0xc) +#define RTL930X_GPIO_PABCD_ISR (RTL930X_GPIO_CTRL_REG_BASE + 0x10) +#define RTL930X_GPIO_PAB_IMR (RTL930X_GPIO_CTRL_REG_BASE + 0x14) +#define RTL930X_GPIO_PCD_IMR (RTL930X_GPIO_CTRL_REG_BASE + 0x18) + #define RTL838X_MODEL_NAME_INFO (0x00D4) #define RTL839X_MODEL_NAME_INFO (0x0FF0) #define RTL93XX_MODEL_NAME_INFO (0x0004) diff --git a/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c b/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c new file mode 100644 index 000000000000..2009ebcce924 --- /dev/null +++ b/target/linux/realtek/files-5.10/drivers/gpio/gpio-rtl838x.c @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include + +/* RTL8231 registers for LED control */ +#define RTL8231_LED_FUNC0 0x0000 +#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4)) +#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4)) +#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4)) + +struct rtl838x_gpios { + struct gpio_chip gc; + u32 id; + struct device *dev; + int irq; + int num_leds; + int min_led; + int leds_per_port; + u32 led_mode; + int led_glb_ctrl; + int led_sw_ctrl; + int (*led_sw_p_ctrl)(int port); + int (*led_sw_p_en_ctrl)(int port); + int (*ext_gpio_dir)(int i); + int (*ext_gpio_data)(int i); +}; + +inline int rtl838x_ext_gpio_dir(int i) +{ + return RTL838X_EXT_GPIO_DIR + ((i >>5) << 2); +} + +inline int rtl839x_ext_gpio_dir(int i) +{ + return RTL839X_EXT_GPIO_DIR + ((i >>5) << 2); +} + +inline int rtl838x_ext_gpio_data(int i) +{ + return RTL838X_EXT_GPIO_DATA + ((i >>5) << 2); +} + +inline int rtl839x_ext_gpio_data(int i) +{ + return RTL839X_EXT_GPIO_DATA + ((i >>5) << 2); +} + +inline int rtl838x_led_sw_p_ctrl(int p) +{ + return RTL838X_LED_SW_P_CTRL + (p << 2); +} + +inline int rtl839x_led_sw_p_ctrl(int p) +{ + return RTL839X_LED_SW_P_CTRL + (p << 2); +} + +inline int rtl838x_led_sw_p_en_ctrl(int p) +{ + return RTL838X_LED_SW_P_EN_CTRL + ((p / 10) << 2); +} + +inline int rtl839x_led_sw_p_en_ctrl(int p) +{ + return RTL839X_LED_SW_P_EN_CTRL + ((p / 10) << 2); +} + +extern struct mutex smi_lock; +extern struct rtl83xx_soc_info soc_info; + + +void rtl838x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + int bit; + struct rtl838x_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("rtl838x_set: %d, value: %d\n", offset, value); + /* Internal GPIO of the RTL8380 */ + if (offset < 32) { + if (value) + rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DATA); + else + rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DATA); + } + + /* LED driver for PWR and SYS */ + if (offset >= 32 && offset < 64) { + bit = offset - 32; + if (value) + sw_w32_mask(0, BIT(bit), gpios->led_glb_ctrl); + else + sw_w32_mask(BIT(bit), 0, gpios->led_glb_ctrl); + return; + } + + bit = (offset - 64) % 32; + /* First Port-LED */ + if (offset >= 64 && offset < 96 + && offset >= (64 + gpios->min_led) + && offset < (64 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7, 5, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7, 0, gpios->led_sw_p_ctrl(bit)); + } + if (offset >= 96 && offset < 128 + && offset >= (96 + gpios->min_led) + && offset < (96 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7 << 3, 5 << 3, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7 << 3, 0, gpios->led_sw_p_ctrl(bit)); + } + if (offset >= 128 && offset < 160 + && offset >= (128 + gpios->min_led) + && offset < (128 + gpios->min_led + gpios->num_leds)) { + if (value) + sw_w32_mask(7 << 6, 5 << 6, gpios->led_sw_p_ctrl(bit)); + else + sw_w32_mask(7 << 6, 0, gpios->led_sw_p_ctrl(bit)); + } + __asm__ volatile ("sync"); +} + +void rtl930x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + pr_debug("rtl838x_set: %d, value: %d\n", offset, value); + /* Internal GPIO of the RTL9300 */ + if (value) + rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DAT); + else + rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DAT); +} + +static int rtl838x_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + pr_debug("%s: %d\n", __func__, offset); + + if (offset < 32) { + rtl83xx_w32_mask(BIT(offset), 0, RTL838X_GPIO_PABC_DIR); + return 0; + } + + /* Internal LED driver does not support input */ + return -ENOTSUPP; +} + +static int rtl930x_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + pr_debug("%s: %d\n", __func__, offset); + + rtl83xx_w32_mask(BIT(offset), 0, RTL930X_GPIO_PABCD_DIR); + return 0; +} + +static int rtl838x_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + pr_debug("%s: %d\n", __func__, offset); + if (offset < 32) + rtl83xx_w32_mask(0, BIT(offset), RTL838X_GPIO_PABC_DIR); + rtl930x_gpio_set(gc, offset, value); + + /* LED for PWR and SYS driver is direction output by default */ + return 0; +} + +static int rtl930x_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + pr_debug("%s: %d\n", __func__, offset); + rtl83xx_w32_mask(0, BIT(offset), RTL930X_GPIO_PABCD_DIR); + rtl930x_gpio_set(gc, offset, value); + + /* LED for PWR and SYS driver is direction output by default */ + return 0; +} + +static int rtl838x_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + u32 v = 0; + + pr_debug("%s: %d\n", __func__, offset); + if (offset < 32) { + v = rtl83xx_r32(RTL838X_GPIO_PABC_DIR); + if (v & BIT(offset)) + return 0; + return 1; + } + + /* LED driver for PWR and SYS is direction output by default */ + if (offset >= 32 && offset < 64) + return 0; + + return 0; +} + +static int rtl930x_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + u32 v = 0; + + v = rtl83xx_r32(RTL930X_GPIO_PABCD_DIR); + if (v & BIT(offset)) + return 0; + return 1; +} + +static int rtl838x_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + u32 v; + struct rtl838x_gpios *gpios = gpiochip_get_data(gc); + + pr_debug("%s: %d\n", __func__, offset); + + /* Internal GPIO of the RTL8380 */ + if (offset < 32) { + v = rtl83xx_r32(RTL838X_GPIO_PABC_DATA); + if (v & BIT(offset)) + return 1; + return 0; + } + + /* LED driver for PWR and SYS */ + if (offset >= 32 && offset < 64) { + v = sw_r32(gpios->led_glb_ctrl); + if (v & BIT(offset-32)) + return 1; + return 0; + } + + return 0; +} + +static int rtl930x_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + u32 v = rtl83xx_r32(RTL930X_GPIO_PABCD_DAT); + if (v & BIT(offset)) + return 1; + return 0; +} + +void rtl8380_led_test(struct rtl838x_gpios *gpios, u32 mask) +{ + int i; + u32 led_gbl = sw_r32(gpios->led_glb_ctrl); + u32 mode_sel, led_p_en; + + if (soc_info.family == RTL8380_FAMILY_ID) { + mode_sel = sw_r32(RTL838X_LED_MODE_SEL); + led_p_en = sw_r32(RTL838X_LED_P_EN_CTRL); + } + + /* 2 Leds for ports 0-23 and 24-27, 3 would be 0x7 */ + sw_w32_mask(0x3f, 0x3 | (0x3 << 3), gpios->led_glb_ctrl); + + if(soc_info.family == RTL8380_FAMILY_ID) { + /* Enable all leds */ + sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); + } + /* Enable software control of all leds */ + sw_w32(0xFFFFFFF, gpios->led_sw_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + for (i = 0; i < 28; i++) { + if (mask & BIT(i)) + sw_w32(5 | (5 << 3) | (5 << 6), gpios->led_sw_p_ctrl(i)); + } + msleep(3000); + + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(led_p_en, RTL838X_LED_P_EN_CTRL); + /* Disable software control of all leds */ + sw_w32(0x0000000, gpios->led_sw_ctrl); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + sw_w32(led_gbl, gpios->led_glb_ctrl); + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(mode_sel, RTL838X_LED_MODE_SEL); +} + +void take_port_leds(struct rtl838x_gpios *gpios) +{ + int leds_per_port = gpios->leds_per_port; + int mode = gpios->led_mode; + + pr_info("%s, %d, %x\n", __func__, leds_per_port, mode); + pr_debug("Bootloader settings: %x %x %x\n", + sw_r32(gpios->led_sw_p_en_ctrl(0)), + sw_r32(gpios->led_sw_p_en_ctrl(10)), + sw_r32(gpios->led_sw_p_en_ctrl(20)) + ); + + if (soc_info.family == RTL8380_FAMILY_ID) { + pr_debug("led glb: %x, sel %x\n", + sw_r32(gpios->led_glb_ctrl), sw_r32(RTL838X_LED_MODE_SEL)); + pr_debug("RTL838X_LED_P_EN_CTRL: %x", sw_r32(RTL838X_LED_P_EN_CTRL)); + pr_debug("RTL838X_LED_MODE_CTRL: %x", sw_r32(RTL838X_LED_MODE_CTRL)); + sw_w32_mask(3, 0, RTL838X_LED_MODE_SEL); + sw_w32(mode, RTL838X_LED_MODE_CTRL); + } + + /* Enable software control of all leds */ + sw_w32(0xFFFFFFF, gpios->led_sw_ctrl); + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(0xFFFFFFF, RTL838X_LED_P_EN_CTRL); + + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(0)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(10)); + sw_w32(0x0000000, gpios->led_sw_p_en_ctrl(20)); + + sw_w32_mask(0x3f, 0, gpios->led_glb_ctrl); + switch (leds_per_port) { + case 3: + sw_w32_mask(0, 0x7 | (0x7 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(20)); + /* FALLTHRU */ + case 2: + sw_w32_mask(0, 0x3 | (0x3 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(10)); + /* FALLTHRU */ + case 1: + sw_w32_mask(0, 0x1 | (0x1 << 3), gpios->led_glb_ctrl); + sw_w32(0xFFFFFFF, gpios->led_sw_p_en_ctrl(0)); + break; + default: + pr_err("No LEDS configured for software control\n"); + } +} + +static const struct of_device_id rtl838x_gpio_of_match[] = { + { .compatible = "realtek,rtl838x-gpio" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, rtl838x_gpio_of_match); + +static int rtl838x_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct rtl838x_gpios *gpios; + int err; + + pr_info("Probing RTL838X GPIOs for %08x\n", soc_info.id); + + if (!np) { + dev_err(&pdev->dev, "No DT found\n"); + return -EINVAL; + } + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return -ENOMEM; + + gpios->id = soc_info.id; + + switch (gpios->id) { + case 0x8332: + pr_debug("Found RTL8332M GPIO\n"); + break; + case 0x8380: + pr_debug("Found RTL8380M GPIO\n"); + break; + case 0x8381: + pr_debug("Found RTL8381M GPIO\n"); + break; + case 0x8382: + pr_debug("Found RTL8382M GPIO\n"); + break; + case 0x8391: + pr_debug("Found RTL8391 GPIO\n"); + break; + case 0x8393: + pr_debug("Found RTL8393 GPIO\n"); + break; + case 0x9302: + pr_info("Found RTL9302 GPIO\n"); + break; + default: + pr_err("Unknown GPIO chip id (%04x)\n", gpios->id); + return -ENODEV; + } + + if (soc_info.family == RTL8380_FAMILY_ID) { + gpios->led_glb_ctrl = RTL838X_LED_GLB_CTRL; + gpios->led_sw_ctrl = RTL838X_LED_SW_CTRL; + gpios->led_sw_p_ctrl = rtl838x_led_sw_p_ctrl; + gpios->led_sw_p_en_ctrl = rtl838x_led_sw_p_en_ctrl; + gpios->ext_gpio_dir = rtl838x_ext_gpio_dir; + gpios->ext_gpio_data = rtl838x_ext_gpio_data; + gpios->irq = 31; + } + + if (soc_info.family == RTL8390_FAMILY_ID) { + gpios->led_glb_ctrl = RTL839X_LED_GLB_CTRL; + gpios->led_sw_ctrl = RTL839X_LED_SW_CTRL; + gpios->led_sw_p_ctrl = rtl839x_led_sw_p_ctrl; + gpios->led_sw_p_en_ctrl = rtl839x_led_sw_p_en_ctrl; + gpios->ext_gpio_dir = rtl839x_ext_gpio_dir; + gpios->ext_gpio_data = rtl839x_ext_gpio_data; + gpios->irq = 31; + } + + if (soc_info.family == RTL9300_FAMILY_ID) { + gpios->irq = 13; + } + + gpios->gc.label = "rtl838x"; + gpios->gc.parent = dev; + gpios->gc.owner = THIS_MODULE; + gpios->gc.can_sleep = true; + gpios->dev = dev; + gpios->gc.base = 0; + + if (soc_info.family != RTL9300_FAMILY_ID) { + /* 0-31: internal + * 32-63, LED control register + * 64-95: PORT-LED 0 + * 96-127: PORT-LED 1 + * 128-159: PORT-LED 2 + */ + gpios->gc.ngpio = 160; + + gpios->gc.direction_input = rtl838x_direction_input; + gpios->gc.direction_output = rtl838x_direction_output; + gpios->gc.set = rtl838x_gpio_set; + gpios->gc.get = rtl838x_gpio_get; + gpios->gc.get_direction = rtl838x_get_direction; + } else { + gpios->gc.ngpio = 32; + + gpios->gc.direction_input = rtl930x_direction_input; + gpios->gc.direction_output = rtl930x_direction_output; + gpios->gc.set = rtl930x_gpio_set; + gpios->gc.get = rtl930x_gpio_get; + gpios->gc.get_direction = rtl930x_get_direction; + } + + if (of_property_read_bool(np, "take-port-leds")) { + pr_info("A1\n"); + if (of_property_read_u32(np, "leds-per-port", &gpios->leds_per_port)) + gpios->leds_per_port = 2; + if (of_property_read_u32(np, "led-mode", &gpios->led_mode)) + gpios->led_mode = (0x1ea << 15) | 0x1ea; + if (of_property_read_u32(np, "num-leds", &gpios->num_leds)) + gpios->num_leds = 32; + if (of_property_read_u32(np, "min-led", &gpios->min_led)) + gpios->min_led = 0; + take_port_leds(gpios); + } + + err = devm_gpiochip_add_data(dev, &gpios->gc, gpios); + + return err; +} + +static struct platform_driver rtl838x_gpio_driver = { + .driver = { + .name = "rtl838x-gpio", + .of_match_table = rtl838x_gpio_of_match, + }, + .probe = rtl838x_gpio_probe, +}; + +module_platform_driver(rtl838x_gpio_driver); + +MODULE_DESCRIPTION("Realtek RTL838X GPIO API support"); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch b/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch new file mode 100644 index 000000000000..830440cf8dbf --- /dev/null +++ b/target/linux/realtek/patches-5.10/306-gpio-add-legacy-rtl838x-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -514,6 +514,12 @@ + help + Say yes here to support Realtek RTL8231 GPIO expansion chips. + ++config GPIO_RTL838X ++ tristate "RTL838X GPIO" ++ depends on RTL838X ++ help ++ Say yes here to support RTL838X GPIO on RTL93xx SoCs. ++ + config GPIO_SAMA5D2_PIOBU + tristate "SAMA5D2 PIOBU GPIO support" + depends on MFD_SYSCON +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -127,6 +127,7 @@ + obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o + obj-$(CONFIG_GPIO_REG) += gpio-reg.o + obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o ++obj-$(CONFIG_GPIO_RTL838X) += gpio-rtl838x.o + obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o + obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o + obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o