From: John Crispin Date: Tue, 14 Feb 2012 17:48:04 +0000 (+0000) Subject: Support booting the Speedport W502V using BRN-BOOT. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cd1a204365fff2639329c28c1b986f3a4e7246d4;p=openwrt%2Fstaging%2Fstintel.git Support booting the Speedport W502V using BRN-BOOT. While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich SVN-Revision: 30532 --- diff --git a/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c index 78d8b5b77e..9be1a5fb93 100644 --- a/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c +++ b/target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-arv45xx.c @@ -78,6 +78,35 @@ static struct mtd_partition arv45xx_partitions[] = }, }; +static struct mtd_partition arv45xx_brnboot_partitions[] = +{ + { + .name = "brn-boot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "config", + .offset = 0x20000, + .size = 0x30000, + }, + { + .name = "linux", + .offset = 0x50000, + .size = 0x390000, + }, + { + .name = "reserved", /* 12-byte signature at 0x3efff4 :/ */ + .offset = 0x3e0000, + .size = 0x010000, + }, + { + .name = "eeprom", + .offset = 0x3f0000, + .size = 0x10000, + }, +}; + static struct mtd_partition arv7525_partitions[] = { { @@ -136,6 +165,11 @@ static struct physmap_flash_data arv45xx_flash_data = { .parts = arv45xx_partitions, }; +static struct physmap_flash_data arv45xx_brnboot_flash_data = { + .nr_parts = ARRAY_SIZE(arv45xx_brnboot_partitions), + .parts = arv45xx_brnboot_partitions, +}; + static struct physmap_flash_data arv7525_flash_data = { .nr_parts = ARRAY_SIZE(arv7525_partitions), .parts = arv7525_partitions, @@ -244,13 +278,22 @@ arv452cpw_gpio_leds[] __initdata = { static struct gpio_led arv4525pw_gpio_leds[] __initdata = { - { .name = "soc:green:fxs1", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, - { .name = "soc:green:fxs2", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, - { .name = "soc:red:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, { .name = "soc:green:wifi", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, { .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, }; +#define ARV4525PW_PHYRESET 13 +#define ARV4525PW_RELAY 31 + +static struct gpio arv4525pw_gpios[] __initdata = { + { ARV4525PW_PHYRESET, GPIOF_OUT_INIT_HIGH, "phyreset" }, + { ARV4525PW_RELAY, GPIOF_OUT_INIT_HIGH, "relay" }, +}; + + static struct gpio_led arv752dpw22_gpio_leds[] __initdata = { { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, @@ -521,16 +564,24 @@ MIPS_MACHINE(LANTIQ_MACH_ARV452CPW, "ARV452CPW - Arcor A801", arv452Cpw_init); - static void __init arv4525pw_init(void) { -#define ARV4525PW_MADWIFI_ADDR 0xb07f0400 +#define ARV4525PW_MADWIFI_ADDR 0xb03f0400 + if (ltq_brn_boot) + ltq_register_nor(&arv45xx_brnboot_flash_data); + else + ltq_register_nor(&arv45xx_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds); - ltq_register_nor(&arv45xx_flash_data); + gpio_request_array(arv4525pw_gpios, ARRAY_SIZE(arv4525pw_gpios)); + gpio_export(ARV4525PW_RELAY, false); + gpio_export(ARV4525PW_PHYRESET, false); ltq_pci_data.clock = PCI_CLOCK_INT; ltq_register_pci(<q_pci_data); ltq_register_madwifi_eep(ARV4525PW_MADWIFI_ADDR); + arv45xx_register_ath5k(); + ltq_register_ath5k(arv45xx_ath5k_eeprom_data, arv45xx_ath5k_eeprom_mac); ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII; arv45xx_register_ethernet(); } diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 8c607b2151..9ccf45d188 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -23,6 +23,12 @@ define PatchKernelLzma $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).lzma) endef +define MkBrnImage + mkbrncmdline -i $(KDIR)/vmlinux-$(4) -o $(KDIR)/vmlinux-$(4)-brn BRN-BOOT $(6) + $(call CompressLzma,$(KDIR)/vmlinux-$(4)-brn,$(KDIR)/vmlinux-$(4)-brn.lzma) + mkbrnimg -s $(1) -m $(2) -o $(3) $(KDIR)/vmlinux-$(4)-brn.lzma $(KDIR)/root.$(5) +endef + define MkImageLzma mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma \ -e 0x80002000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ @@ -32,6 +38,7 @@ endef define Image/Build/squashfs cat $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image) + $(if $(3),$(call MkBrnImage,$(3),$(4),$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(3)-brnImage,$(2),$(1),$(5))) endef define Image/Build/jffs2-64k @@ -109,7 +116,7 @@ define Image/BuildKernel/Profile/ARV4525PW endef define Image/Build/Profile/ARV4525PW - $(call Image/Build/$(1),$(1),ARV4525PW) + $(call Image/Build/$(1),$(1),ARV4525PW,BRNDTW502,0x12345678,memsize=32) endef define Image/BuildKernel/Profile/ARV7525PW diff --git a/target/linux/lantiq/patches/206-owrt-brnboot.patch b/target/linux/lantiq/patches/206-owrt-brnboot.patch new file mode 100644 index 0000000000..c21d76d1f8 --- /dev/null +++ b/target/linux/lantiq/patches/206-owrt-brnboot.patch @@ -0,0 +1,93 @@ +Index: linux-3.1.9/drivers/mtd/mtdpart.c +=================================================================== +--- linux-3.1.9.orig/drivers/mtd/mtdpart.c 2012-01-29 22:55:30.295904157 +0100 ++++ linux-3.1.9/drivers/mtd/mtdpart.c 2012-01-29 22:55:30.395904294 +0100 +@@ -899,6 +899,38 @@ + return le32_to_cpu(temp) == SQUASHFS_MAGIC; + } + ++static unsigned long find_brnimage_size(struct mtd_info *mtd, ++ unsigned long offset) ++{ ++ unsigned long buf[4]; ++ // Assume at most 2MB of kernel image ++ unsigned long end = offset + (2 << 20); ++ unsigned long ptr = offset + 0x400 - 12; ++ size_t len; ++ int ret; ++ ++ while (ptr < end) { ++ long size_min = ptr - 0x400 - 12 - offset; ++ long size_max = ptr + 12 - offset; ++ ret = mtd->read(mtd, ptr, 16, &len, (void *)buf); ++ if (ret || len != 16) ++ return 0; ++ ++ if (le32_to_cpu(buf[0]) < size_min || ++ le32_to_cpu(buf[0]) > size_max) { ++ ptr += 0x400; ++ continue; ++ } ++ ++ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) ++ return ptr + 12 - offset; ++ ++ ptr += 0x400; ++ } ++ ++ return 0; ++} ++ + static int split_uimage(struct mtd_info *mtd, + const struct mtd_partition *part) + { +@@ -916,8 +948,11 @@ + + split_partitions[0].size = find_uimage_size(mtd, part->offset); + if (!split_partitions[0].size) { +- printk(KERN_NOTICE "no uImage found in linux partition\n"); +- return -1; ++ split_partitions[0].size = find_brnimage_size(mtd, part->offset); ++ if (!split_partitions[0].size) { ++ printk(KERN_NOTICE "no uImage or brnImage found in linux partition\n"); ++ return -1; ++ } + } + + if (!detect_squashfs_partition(mtd, +Index: linux-3.1.9/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +=================================================================== +--- linux-3.1.9.orig/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2012-01-29 22:55:30.195904014 +0100 ++++ linux-3.1.9/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2012-01-29 22:55:30.395904294 +0100 +@@ -149,6 +149,7 @@ + + extern __iomem void *ltq_ebu_membase; + extern __iomem void *ltq_cgu_membase; ++extern long ltq_brn_boot; + + /* request a non-gpio and set the PIO config */ + extern int ltq_gpio_request(unsigned int pin, unsigned int alt0, +Index: linux-3.1.9/arch/mips/lantiq/setup.c +=================================================================== +--- linux-3.1.9.orig/arch/mips/lantiq/setup.c 2012-01-29 22:55:30.095903875 +0100 ++++ linux-3.1.9/arch/mips/lantiq/setup.c 2012-01-29 22:59:28.686237119 +0100 +@@ -20,6 +20,8 @@ + + /* assume 16M as default incase uboot fails to pass proper ramsize */ + unsigned long physical_memsize = 16L; ++/* set to 1 if the bootloader is BRN-BOOT instead of u-boot */ ++unsigned long ltq_brn_boot = 0; + + void __init plat_mem_setup(void) + { +@@ -39,6 +41,10 @@ + if (strict_strtoul(e, 0, &physical_memsize)) + pr_warn("bad memsize specified\n"); + } ++ if (!strncmp(e, "BRN-BOOT", 8)){ ++ pr_info("Found BRN-BOOT instead of u-boot\n"); ++ ltq_brn_boot = 1; ++ } + envp++; + } + physical_memsize *= 1024 * 1024; diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile index cd7531f216..4364223546 100644 --- a/tools/firmware-utils/Makefile +++ b/tools/firmware-utils/Makefile @@ -55,6 +55,8 @@ define Host/Compile $(call cc,buffalo-tftp buffalo-lib, -Wall) $(call cc,mkwrgimg md5, -Wall) $(call cc,mkedimaximg) + $(call cc,mkbrncmdline) + $(call cc,mkbrnimg) endef define Host/Install diff --git a/tools/firmware-utils/src/mkbrncmdline.c b/tools/firmware-utils/src/mkbrncmdline.c new file mode 100644 index 0000000000..6eb4bfe7cf --- /dev/null +++ b/tools/firmware-utils/src/mkbrncmdline.c @@ -0,0 +1,168 @@ +/* + * mkbrncmdline.c - partially based on OpenWrt's wndr3700.c + * + * Copyright (C) 2011 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License, + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void usage(const char *) __attribute__ (( __noreturn__ )); + +static void usage(const char *mess) +{ + fprintf(stderr, "Error: %s\n", mess); + fprintf(stderr, "Usage: mkbrncmdline -i input_file -o output_file [-a loadaddress] arg1 [argx ...]\n"); + fprintf(stderr, "\n"); + exit(1); +} + +static char *input_file = NULL; +static char *output_file = NULL; +static unsigned loadaddr = 0x80002000; + +static void parseopts(int *argc, char ***argv) +{ + char *endptr; + int res; + + while ((res = getopt(*argc, *argv, "a:i:o:")) != -1) { + switch (res) { + default: + usage("Unknown option"); + break; + case 'a': + loadaddr = strtoul(optarg, &endptr, 0); + if (endptr == optarg || *endptr != 0) + usage("loadaddress must be a decimal or hexadecimal 32-bit value"); + break; + case 'i': + input_file = optarg; + break; + case 'o': + output_file = optarg; + break; + } + } + *argc -= optind; + *argv += optind; +} + +static void emitload(int outfd, int reg, unsigned value) +{ + char buf[8] = { + 0x3c, 0x04 + reg, + value >> 24, value >> 16, + 0x34, 0x84 + reg + (reg << 5), + value >> 8, value, + }; + if (write(outfd, buf, sizeof(buf)) != sizeof(buf)) { + fprintf(stderr, "write: %s\n", strerror(errno)); + exit(1); + } +} + +int main(int argc, char **argv) +{ + int outfd; + int i; + int fd; + size_t len, skip, buf_len; + unsigned cmdline_addr; + unsigned s_ofs; + char *buf; + + parseopts(&argc, &argv); + + if (argc < 1) + usage("must specify at least one kernel cmdline argument"); + + if (input_file == NULL || output_file == NULL) + usage("must specify input and output file"); + + if ((outfd = open(output_file, O_WRONLY|O_CREAT|O_TRUNC, 0644)) == -1) + { + fprintf(stderr, "Error opening '%s' for writing: %s\n", output_file, strerror(errno)); + exit(1); + } + + // mmap input_file + if ((fd = open(input_file, O_RDONLY)) < 0 + || (len = lseek(fd, 0, SEEK_END)) < 0 + || (input_file = mmap(0, len, PROT_READ, MAP_SHARED, fd, 0)) == (void *) (-1) + || close(fd) < 0) + { + fprintf(stderr, "Error mapping file '%s': %s\n", input_file, strerror(errno)); + exit(1); + } + + cmdline_addr = loadaddr + len; + + // Kernel args are passed in registers a0,a1,a2 and a3 + emitload(outfd, 0, 0); /* a0 = 0 */ + emitload(outfd, 1, 0); /* a1 = 0 */ + emitload(outfd, 2, cmdline_addr); /* a2 = &cmdline */ + emitload(outfd, 3, 0); /* a3 = 0 */ + skip = lseek(outfd, 0, SEEK_END); + + // write the kernel + if (write(outfd, input_file + skip, len - skip) != len -skip) { + fprintf(stderr, "write: %s\n", strerror(errno)); + exit(1); + } + + // write cmdline structure + buf_len = (argc + 1) * 4; + for (i=0; i> 24; + buf[i * 4 + 1] = s_ptr >> 16; + buf[i * 4 + 2] = s_ptr >> 8; + buf[i * 4 + 3] = s_ptr >> 0; + memcpy(&buf[s_ofs], argv[i], strlen(argv[i])); + s_ofs += strlen(argv[i]) + 1; + } + if (write(outfd, buf, buf_len) != buf_len) { + fprintf(stderr, "write: %s\n", strerror(errno)); + exit(1); + } + + + munmap(input_file, len); + close(outfd); + free(buf); + + return 0; +} diff --git a/tools/firmware-utils/src/mkbrnimg.c b/tools/firmware-utils/src/mkbrnimg.c new file mode 100644 index 0000000000..fff92c4ef6 --- /dev/null +++ b/tools/firmware-utils/src/mkbrnimg.c @@ -0,0 +1,183 @@ +/* + * mkbrnimg.c - partially based on OpenWrt's wndr3700.c + * + * Copyright (C) 2011 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License, + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BPB 8 /* bits/byte */ + +static uint32_t crc32[1<> 1)) : (crc >> 1); + crc32[n] = crc; + } +} + +static uint32_t crc32buf(unsigned char *buf, size_t len) +{ + uint32_t crc = 0xFFFFFFFF; + + for (; len; len--, buf++) + crc = crc32[(uint8_t)crc ^ *buf] ^ (crc >> BPB); + return ~crc; +} + +static void usage(const char *) __attribute__ (( __noreturn__ )); + +static void usage(const char *mess) +{ + fprintf(stderr, "Error: %s\n", mess); + fprintf(stderr, "Usage: mkbrnimg [-o output_file] [-m magic] [-s signature] kernel_file [additional files]\n"); + fprintf(stderr, "\n"); + exit(1); +} + +static char *output_file = "default-brnImage"; +static uint32_t magic = 0x12345678; +static char *signature = "BRNDTW502"; + +static void parseopts(int *argc, char ***argv) +{ + char *endptr; + int res; + + while ((res = getopt(*argc, *argv, "o:m:s:")) != -1) { + switch (res) { + default: + usage("Unknown option"); + break; + case 'o': + output_file = optarg; + break; + case 'm': + magic = strtoul(optarg, &endptr, 0); + if (endptr == optarg || *endptr != 0) + usage("magic must be a decimal or hexadecimal 32-bit value"); + break; + case 's': + signature = optarg; + break; + } + } + *argc -= optind; + *argv += optind; +} + +static void appendfile(int outfd, char *path, int kernel) { + int fd; + size_t len, padded_len; + char *input_file; + uint32_t crc; + char padding[0x400]; + char footer[12]; + + memset(padding, 0xff, sizeof(padding)); + + // mmap input_file + if ((fd = open(path, O_RDONLY)) < 0 + || (len = lseek(fd, 0, SEEK_END)) < 0 + || (input_file = mmap(0, len, PROT_READ, MAP_SHARED, fd, 0)) == (void *) (-1) + || close(fd) < 0) + { + fprintf(stderr, "Error mapping file '%s': %s\n", path, strerror(errno)); + exit(1); + } + + // kernel should be lzma compressed image, not uImage + if (kernel && + (input_file[0] != (char)0x5d || + input_file[1] != (char)0x00 || + input_file[2] != (char)0x00 || + input_file[3] != (char)0x80)) { + fprintf(stderr, "lzma signature not found on kernel image.\n"); + exit(1); + } + + init_crc32(); + crc = crc32buf(input_file, len); + fprintf(stderr, "crc32 for '%s' is %08x.\n", path, crc); + + // write the file + write(outfd, input_file, len); + + // write padding + padded_len = ((len + sizeof(footer) + sizeof(padding) - 1) & ~(sizeof(padding) - 1)) - sizeof(footer); + fprintf(stderr, "len=%08x padded_len=%08x\n", len, padded_len); + write(outfd, padding, padded_len - len); + + // write footer + footer[0] = (len >> 0) & 0xff; + footer[1] = (len >> 8) & 0xff; + footer[2] = (len >> 16) & 0xff; + footer[3] = (len >> 24) & 0xff; + footer[4] = (magic >> 0) & 0xff; + footer[5] = (magic >> 8) & 0xff; + footer[6] = (magic >> 16) & 0xff; + footer[7] = (magic >> 24) & 0xff; + footer[8] = (crc >> 0) & 0xff; + footer[9] = (crc >> 8) & 0xff; + footer[10] = (crc >> 16) & 0xff; + footer[11] = (crc >> 24) & 0xff; + write(outfd, footer, sizeof(footer)); + + munmap(input_file, len); +} + +int main(int argc, char **argv) +{ + int outfd; + int i; + + parseopts(&argc, &argv); + + if (argc < 1) + usage("wrong number of arguments"); + + if ((outfd = open(output_file, O_WRONLY|O_CREAT|O_TRUNC, 0644)) == -1) + { + fprintf(stderr, "Error opening '%s' for writing: %s\n", output_file, strerror(errno)); + exit(1); + } + + for (i=0; i