From: Nicolas Ferre Date: Thu, 4 Dec 2014 14:09:47 +0000 (+0100) Subject: ARM: at91: remove unneeded header file X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ccf7222412dedc59b579a7fa14e08af3cdbf72ca;p=openwrt%2Fstaging%2Fblogic.git ARM: at91: remove unneeded header file These GPIO pin descriptions are now moved with the pinctrl driver. We can safely remove this useless header file. Reported-by: Arnd Bergmann Signed-off-by: Nicolas Ferre --- diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h deleted file mode 100644 index 7b7366253ceb..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pio.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Parallel I/O Controller (PIO) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIO_H -#define AT91_PIO_H - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ -#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ -#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ -#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ -#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ -#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ -#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ -#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ -#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ -#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ -#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ -#define PIO_ESR 0xc0 /* Edge Select Register */ -#define PIO_LSR 0xc4 /* Level Select Register */ -#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ -#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ -#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ -#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ -#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ - -#define ABCDSR_PERIPH_A 0x0 -#define ABCDSR_PERIPH_B 0x1 -#define ABCDSR_PERIPH_C 0x2 -#define ABCDSR_PERIPH_D 0x3 - -#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/ -#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/ - -#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/ -#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/ - -#endif