From: Christian Marangi Date: Fri, 21 Oct 2022 21:55:37 +0000 (+0200) Subject: generic: 5.15: move mvebu aardvark patch from pending to backport X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ccedd7175d19b03dadf4b2bcd85f5c762a41b363;p=openwrt%2Fstaging%2Fnbd.git generic: 5.15: move mvebu aardvark patch from pending to backport Move mvebu aardvark patch from pending to backport as they got merged upstream. One additional patch is needed as a later fixup for it. Signed-off-by: Christian Marangi --- diff --git a/target/linux/generic/backport-5.15/344-v5.18-01-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch b/target/linux/generic/backport-5.15/344-v5.18-01-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch new file mode 100644 index 0000000000..d6c4b4fd1e --- /dev/null +++ b/target/linux/generic/backport-5.15/344-v5.18-01-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch @@ -0,0 +1,219 @@ +From 4bf18d5a2dd02db8c5b16a2cfae513510506df5b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 3 Feb 2022 22:44:40 +0100 +Subject: [PATCH 1/2] phy: marvell: phy-mvebu-a3700-comphy: Remove port from + driver configuration +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Port number is encoded into argument for SMC call. It is zero for SATA, +PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY +(incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero +port number. + +So construct "port" bits for SMC call argument can be constructed directly +from PHY type and lane number. + +Change driver code to always pass zero port number for non-ethernet PHYs +and for ethernet PHYs determinate port number from lane number. This +simplifies the driver. + +As port number from DT PHY configuration is not used anymore, remove whole +driver code which parses it. This also simplifies the driver. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Reviewed-by: Miquel Raynal +Link: https://lore.kernel.org/r/20220203214444.1508-2-kabel@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 62 +++++++++----------- + 1 file changed, 29 insertions(+), 33 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -20,7 +20,6 @@ + #include + + #define MVEBU_A3700_COMPHY_LANES 3 +-#define MVEBU_A3700_COMPHY_PORTS 2 + + /* COMPHY Fast SMC function identifiers */ + #define COMPHY_SIP_POWER_ON 0x82000001 +@@ -45,51 +44,47 @@ + #define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ + ((idx) << 8) | \ + ((speed) << 2)) +-#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \ ++#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ + ((width) << 18)) + + struct mvebu_a3700_comphy_conf { + unsigned int lane; + enum phy_mode mode; + int submode; +- unsigned int port; + u32 fw_mode; + }; + +-#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \ ++#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ + { \ + .lane = _lane, \ + .mode = _mode, \ + .submode = _smode, \ +- .port = _port, \ + .fw_mode = _fw, \ + } + +-#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw) ++#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) + +-#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw) ++#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) + + static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { + /* lane 0 */ +- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, + COMPHY_FW_MODE_USB3H), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, + COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, + COMPHY_FW_MODE_2500BASEX), + /* lane 1 */ +- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, +- COMPHY_FW_MODE_PCIE), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, + COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, + COMPHY_FW_MODE_2500BASEX), + /* lane 2 */ +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, +- COMPHY_FW_MODE_SATA), +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0, ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, + COMPHY_FW_MODE_USB3H), + }; + +@@ -98,7 +93,6 @@ struct mvebu_a3700_comphy_lane { + unsigned int id; + enum phy_mode mode; + int submode; +- int port; + }; + + static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, +@@ -120,7 +114,7 @@ static int mvebu_a3700_comphy_smc(unsign + } + } + +-static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, ++static int mvebu_a3700_comphy_get_fw_mode(int lane, + enum phy_mode mode, + int submode) + { +@@ -132,7 +126,6 @@ static int mvebu_a3700_comphy_get_fw_mod + + for (i = 0; i < n; i++) { + if (mvebu_a3700_comphy_modes[i].lane == lane && +- mvebu_a3700_comphy_modes[i].port == port && + mvebu_a3700_comphy_modes[i].mode == mode && + mvebu_a3700_comphy_modes[i].submode == submode) + break; +@@ -153,7 +146,7 @@ static int mvebu_a3700_comphy_set_mode(s + if (submode == PHY_INTERFACE_MODE_1000BASEX) + submode = PHY_INTERFACE_MODE_SGMII; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode, ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, + submode); + if (fw_mode < 0) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +@@ -172,9 +165,10 @@ static int mvebu_a3700_comphy_power_on(s + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); + u32 fw_param; + int fw_mode; ++ int fw_port; + int ret; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, + lane->mode, lane->submode); + if (fw_mode < 0) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +@@ -191,17 +185,18 @@ static int mvebu_a3700_comphy_power_on(s + fw_param = COMPHY_FW_MODE(fw_mode); + break; + case PHY_MODE_ETHERNET: ++ fw_port = (lane->id == 0) ? 1 : 0; + switch (lane->submode) { + case PHY_INTERFACE_MODE_SGMII: + dev_dbg(lane->dev, "set lane %d to SGMII mode\n", + lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ fw_param = COMPHY_FW_NET(fw_mode, fw_port, + COMPHY_FW_SPEED_1_25G); + break; + case PHY_INTERFACE_MODE_2500BASEX: + dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", + lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ fw_param = COMPHY_FW_NET(fw_mode, fw_port, + COMPHY_FW_SPEED_3_125G); + break; + default: +@@ -212,8 +207,7 @@ static int mvebu_a3700_comphy_power_on(s + break; + case PHY_MODE_PCIE: + dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); +- fw_param = COMPHY_FW_PCIE(fw_mode, lane->port, +- COMPHY_FW_SPEED_5G, ++ fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, + phy->attrs.bus_width); + break; + default: +@@ -247,17 +241,20 @@ static struct phy *mvebu_a3700_comphy_xl + struct of_phandle_args *args) + { + struct mvebu_a3700_comphy_lane *lane; ++ unsigned int port; + struct phy *phy; + +- if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS)) +- return ERR_PTR(-EINVAL); +- + phy = of_phy_simple_xlate(dev, args); + if (IS_ERR(phy)) + return phy; + + lane = phy_get_drvdata(phy); +- lane->port = args->args[0]; ++ ++ port = args->args[0]; ++ if (port != 0 && (port != 1 || lane->id != 0)) { ++ dev_err(lane->dev, "invalid port number %u\n", port); ++ return ERR_PTR(-EINVAL); ++ } + + return phy; + } +@@ -302,7 +299,6 @@ static int mvebu_a3700_comphy_probe(stru + lane->mode = PHY_MODE_INVALID; + lane->submode = PHY_INTERFACE_MODE_NA; + lane->id = lane_id; +- lane->port = -1; + phy_set_drvdata(phy, lane); + } + diff --git a/target/linux/generic/backport-5.15/344-v5.18-02-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch b/target/linux/generic/backport-5.15/344-v5.18-02-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch new file mode 100644 index 0000000000..4593d14bfe --- /dev/null +++ b/target/linux/generic/backport-5.15/344-v5.18-02-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch @@ -0,0 +1,1552 @@ +From 934337080c6c59b75db76b180b509f218640ad48 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 3 Feb 2022 22:44:41 +0100 +Subject: [PATCH 2/2] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel + implementation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Remove old RPC implementation and add a new native kernel implementation. + +The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted +Firmware which provides real implementation of PHY configuration. + +But older versions of ARM Trusted Firmware do not provide this PHY +configuration functionality, simply returning: operation not supported; or +worse, some versions provide the configuration functionality incorrectly. + +For example the firmware shipped in ESPRESSObin board has this older +version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe +functionality do not work with newer versions of Linux kernel. + +Due to the above reasons, the following commits were introduced into Linux, +to workaround these issues by ignoring -EOPNOTSUPP error code from +phy-mvebu-a3700-comphy driver function phy_power_on(): + +commit 45aefe3d2251 ("ata: ahci: mvebu: Make SATA PHY optional for Armada +3720") +commit 3241929b67d2 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for +Armada 3720") +commit b0c6ae0f8948 ("PCI: aardvark: Fix initialization with old Marvell's +Arm Trusted Firmware") + +Replace this RPC implementation with proper native kernel implementation, +which is independent on the firmware. Never return -EOPNOTSUPP for proper +arguments. + +This should solve multiple issues with real-world boards, where it is not +possible or really inconvenient to change the firmware. Let's eliminate +these issues. + +This implementation is ported directly from Armada 3720 comphy driver found +in newest version of ARM Trusted Firmware source code, but with various +fixes of register names, some added comments, some refactoring due to the +original code not conforming to kernel standards. Also PCIe mode poweroff +support was added here, and PHY reset support. These changes are also going +to be sent to ARM Trusted Firmware. + +[ Pali did the porting from ATF. + I (Marek) then fixed some register names, some various other things, + added some comments and refactored the code to kernel standards. Also + fixed PHY poweroff and added PHY reset. ] + +Signed-off-by: Pali Rohár +Acked-by: Miquel Raynal +Signed-off-by: Marek Behún +Link: https://lore.kernel.org/r/20220203214444.1508-3-kabel@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1332 ++++++++++++++++-- + 1 file changed, 1215 insertions(+), 117 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -5,12 +5,16 @@ + * Authors: + * Evan Wang + * Miquèl Raynal ++ * Pali Rohár ++ * Marek Behún + * + * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart. +- * SMC call initial support done by Grzegorz Jaszczyk. ++ * Comphy code from ARM Trusted Firmware ported by Pali Rohár ++ * and Marek Behún . + */ + +-#include ++#include ++#include + #include + #include + #include +@@ -18,103 +22,1118 @@ + #include + #include + #include ++#include + +-#define MVEBU_A3700_COMPHY_LANES 3 ++#define PLL_SET_DELAY_US 600 ++#define COMPHY_PLL_SLEEP 1000 ++#define COMPHY_PLL_TIMEOUT 150000 ++ ++/* Comphy lane2 indirect access register offset */ ++#define COMPHY_LANE2_INDIR_ADDR 0x0 ++#define COMPHY_LANE2_INDIR_DATA 0x4 ++ ++/* SATA and USB3 PHY offset compared to SATA PHY */ ++#define COMPHY_LANE2_REGS_BASE 0x200 ++ ++/* ++ * When accessing common PHY lane registers directly, we need to shift by 1, ++ * since the registers are 16-bit. ++ */ ++#define COMPHY_LANE_REG_DIRECT(reg) (((reg) & 0x7FF) << 1) ++ ++/* COMPHY registers */ ++#define COMPHY_POWER_PLL_CTRL 0x01 ++#define PU_IVREF_BIT BIT(15) ++#define PU_PLL_BIT BIT(14) ++#define PU_RX_BIT BIT(13) ++#define PU_TX_BIT BIT(12) ++#define PU_TX_INTP_BIT BIT(11) ++#define PU_DFE_BIT BIT(10) ++#define RESET_DTL_RX_BIT BIT(9) ++#define PLL_LOCK_BIT BIT(8) ++#define REF_FREF_SEL_MASK GENMASK(4, 0) ++#define REF_FREF_SEL_SERDES_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x1) ++#define REF_FREF_SEL_SERDES_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) ++#define REF_FREF_SEL_SERDES_50MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x4) ++#define REF_FREF_SEL_PCIE_USB3_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x2) ++#define REF_FREF_SEL_PCIE_USB3_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) ++#define COMPHY_MODE_MASK GENMASK(7, 5) ++#define COMPHY_MODE_SATA FIELD_PREP(COMPHY_MODE_MASK, 0x0) ++#define COMPHY_MODE_PCIE FIELD_PREP(COMPHY_MODE_MASK, 0x3) ++#define COMPHY_MODE_SERDES FIELD_PREP(COMPHY_MODE_MASK, 0x4) ++#define COMPHY_MODE_USB3 FIELD_PREP(COMPHY_MODE_MASK, 0x5) ++ ++#define COMPHY_KVCO_CAL_CTRL 0x02 ++#define USE_MAX_PLL_RATE_BIT BIT(12) ++#define SPEED_PLL_MASK GENMASK(7, 2) ++#define SPEED_PLL_VALUE_16 FIELD_PREP(SPEED_PLL_MASK, 0x10) ++ ++#define COMPHY_DIG_LOOPBACK_EN 0x23 ++#define SEL_DATA_WIDTH_MASK GENMASK(11, 10) ++#define DATA_WIDTH_10BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x0) ++#define DATA_WIDTH_20BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x1) ++#define DATA_WIDTH_40BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x2) ++#define PLL_READY_TX_BIT BIT(4) ++ ++#define COMPHY_SYNC_PATTERN 0x24 ++#define TXD_INVERT_BIT BIT(10) ++#define RXD_INVERT_BIT BIT(11) ++ ++#define COMPHY_SYNC_MASK_GEN 0x25 ++#define PHY_GEN_MAX_MASK GENMASK(11, 10) ++#define PHY_GEN_MAX_USB3_5G FIELD_PREP(PHY_GEN_MAX_MASK, 0x1) ++ ++#define COMPHY_ISOLATION_CTRL 0x26 ++#define PHY_ISOLATE_MODE BIT(15) ++ ++#define COMPHY_GEN2_SET2 0x3e ++#define GS2_TX_SSC_AMP_MASK GENMASK(15, 9) ++#define GS2_TX_SSC_AMP_4128 FIELD_PREP(GS2_TX_SSC_AMP_MASK, 0x20) ++#define GS2_VREG_RXTX_MAS_ISET_MASK GENMASK(8, 7) ++#define GS2_VREG_RXTX_MAS_ISET_60U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x0) ++#define GS2_VREG_RXTX_MAS_ISET_80U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x1) ++#define GS2_VREG_RXTX_MAS_ISET_100U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x2) ++#define GS2_VREG_RXTX_MAS_ISET_120U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ ++ 0x3) ++#define GS2_RSVD_6_0_MASK GENMASK(6, 0) ++ ++#define COMPHY_GEN3_SET2 0x3f ++ ++#define COMPHY_IDLE_SYNC_EN 0x48 ++#define IDLE_SYNC_EN BIT(12) ++ ++#define COMPHY_MISC_CTRL0 0x4F ++#define CLK100M_125M_EN BIT(4) ++#define TXDCLK_2X_SEL BIT(6) ++#define CLK500M_EN BIT(7) ++#define PHY_REF_CLK_SEL BIT(10) ++ ++#define COMPHY_SFT_RESET 0x52 ++#define SFT_RST BIT(9) ++#define SFT_RST_NO_REG BIT(10) ++ ++#define COMPHY_MISC_CTRL1 0x73 ++#define SEL_BITS_PCIE_FORCE BIT(15) ++ ++#define COMPHY_GEN2_SET3 0x112 ++#define GS3_FFE_CAP_SEL_MASK GENMASK(3, 0) ++#define GS3_FFE_CAP_SEL_VALUE FIELD_PREP(GS3_FFE_CAP_SEL_MASK, 0xF) ++ ++/* PIPE registers */ ++#define COMPHY_PIPE_LANE_CFG0 0x180 ++#define PRD_TXDEEMPH0_MASK BIT(0) ++#define PRD_TXMARGIN_MASK GENMASK(3, 1) ++#define PRD_TXSWING_MASK BIT(4) ++#define CFG_TX_ALIGN_POS_MASK GENMASK(8, 5) ++ ++#define COMPHY_PIPE_LANE_CFG1 0x181 ++#define PRD_TXDEEMPH1_MASK BIT(15) ++#define USE_MAX_PLL_RATE_EN BIT(9) ++#define TX_DET_RX_MODE BIT(6) ++#define GEN2_TX_DATA_DLY_MASK GENMASK(4, 3) ++#define GEN2_TX_DATA_DLY_DEFT FIELD_PREP(GEN2_TX_DATA_DLY_MASK, 2) ++#define TX_ELEC_IDLE_MODE_EN BIT(0) ++ ++#define COMPHY_PIPE_LANE_STAT1 0x183 ++#define TXDCLK_PCLK_EN BIT(0) ++ ++#define COMPHY_PIPE_LANE_CFG4 0x188 ++#define SPREAD_SPECTRUM_CLK_EN BIT(7) ++ ++#define COMPHY_PIPE_RST_CLK_CTRL 0x1C1 ++#define PIPE_SOFT_RESET BIT(0) ++#define PIPE_REG_RESET BIT(1) ++#define MODE_CORE_CLK_FREQ_SEL BIT(9) ++#define MODE_PIPE_WIDTH_32 BIT(3) ++#define MODE_REFDIV_MASK GENMASK(5, 4) ++#define MODE_REFDIV_BY_4 FIELD_PREP(MODE_REFDIV_MASK, 0x2) ++ ++#define COMPHY_PIPE_TEST_MODE_CTRL 0x1C2 ++#define MODE_MARGIN_OVERRIDE BIT(2) ++ ++#define COMPHY_PIPE_CLK_SRC_LO 0x1C3 ++#define MODE_CLK_SRC BIT(0) ++#define BUNDLE_PERIOD_SEL BIT(1) ++#define BUNDLE_PERIOD_SCALE_MASK GENMASK(3, 2) ++#define BUNDLE_SAMPLE_CTRL BIT(4) ++#define PLL_READY_DLY_MASK GENMASK(7, 5) ++#define CFG_SEL_20B BIT(15) ++ ++#define COMPHY_PIPE_PWR_MGM_TIM1 0x1D0 ++#define CFG_PM_OSCCLK_WAIT_MASK GENMASK(15, 12) ++#define CFG_PM_RXDEN_WAIT_MASK GENMASK(11, 8) ++#define CFG_PM_RXDEN_WAIT_1_UNIT FIELD_PREP(CFG_PM_RXDEN_WAIT_MASK, 0x1) ++#define CFG_PM_RXDLOZ_WAIT_MASK GENMASK(7, 0) ++#define CFG_PM_RXDLOZ_WAIT_7_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0x7) ++#define CFG_PM_RXDLOZ_WAIT_12_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0xC) ++ ++/* ++ * This register is not from PHY lane register space. It only exists in the ++ * indirect register space, before the actual PHY lane 2 registers. So the ++ * offset is absolute, not relative to COMPHY_LANE2_REGS_BASE. ++ * It is used only for SATA PHY initialization. ++ */ ++#define COMPHY_RESERVED_REG 0x0E ++#define PHYCTRL_FRM_PIN_BIT BIT(13) + +-/* COMPHY Fast SMC function identifiers */ +-#define COMPHY_SIP_POWER_ON 0x82000001 +-#define COMPHY_SIP_POWER_OFF 0x82000002 +-#define COMPHY_SIP_PLL_LOCK 0x82000003 +- +-#define COMPHY_FW_MODE_SATA 0x1 +-#define COMPHY_FW_MODE_SGMII 0x2 +-#define COMPHY_FW_MODE_2500BASEX 0x3 +-#define COMPHY_FW_MODE_USB3H 0x4 +-#define COMPHY_FW_MODE_USB3D 0x5 +-#define COMPHY_FW_MODE_PCIE 0x6 +-#define COMPHY_FW_MODE_USB3 0xa +- +-#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ +-#define COMPHY_FW_SPEED_2_5G 1 +-#define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ +-#define COMPHY_FW_SPEED_5G 3 +-#define COMPHY_FW_SPEED_MAX 0x3F +- +-#define COMPHY_FW_MODE(mode) ((mode) << 12) +-#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ +- ((idx) << 8) | \ +- ((speed) << 2)) +-#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ +- ((width) << 18)) ++/* South Bridge PHY Configuration Registers */ ++#define COMPHY_PHY_REG(lane, reg) (((1 - (lane)) * 0x28) + ((reg) & 0x3f)) ++ ++/* ++ * lane0: USB3/GbE1 PHY Configuration 1 ++ * lane1: PCIe/GbE0 PHY Configuration 1 ++ * (used only by SGMII code) ++ */ ++#define COMPHY_PHY_CFG1 0x0 ++#define PIN_PU_IVREF_BIT BIT(1) ++#define PIN_RESET_CORE_BIT BIT(11) ++#define PIN_RESET_COMPHY_BIT BIT(12) ++#define PIN_PU_PLL_BIT BIT(16) ++#define PIN_PU_RX_BIT BIT(17) ++#define PIN_PU_TX_BIT BIT(18) ++#define PIN_TX_IDLE_BIT BIT(19) ++#define GEN_RX_SEL_MASK GENMASK(25, 22) ++#define GEN_RX_SEL_VALUE(val) FIELD_PREP(GEN_RX_SEL_MASK, (val)) ++#define GEN_TX_SEL_MASK GENMASK(29, 26) ++#define GEN_TX_SEL_VALUE(val) FIELD_PREP(GEN_TX_SEL_MASK, (val)) ++#define SERDES_SPEED_1_25_G 0x6 ++#define SERDES_SPEED_3_125_G 0x8 ++#define PHY_RX_INIT_BIT BIT(30) ++ ++/* ++ * lane0: USB3/GbE1 PHY Status 1 ++ * lane1: PCIe/GbE0 PHY Status 1 ++ * (used only by SGMII code) ++ */ ++#define COMPHY_PHY_STAT1 0x18 ++#define PHY_RX_INIT_DONE_BIT BIT(0) ++#define PHY_PLL_READY_RX_BIT BIT(2) ++#define PHY_PLL_READY_TX_BIT BIT(3) ++ ++/* PHY Selector */ ++#define COMPHY_SELECTOR_PHY_REG 0xFC ++/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIe */ ++#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) ++/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */ ++#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) ++/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */ ++#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) + + struct mvebu_a3700_comphy_conf { + unsigned int lane; + enum phy_mode mode; + int submode; +- u32 fw_mode; + }; + +-#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ ++#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode) \ + { \ + .lane = _lane, \ + .mode = _mode, \ + .submode = _smode, \ +- .fw_mode = _fw, \ + } + +-#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) ++#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA) + +-#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ +- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) ++#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode) + + static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { + /* lane 0 */ +- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, +- COMPHY_FW_MODE_USB3H), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, +- COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, +- COMPHY_FW_MODE_2500BASEX), ++ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_1000BASEX), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX), + /* lane 1 */ +- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, +- COMPHY_FW_MODE_SGMII), +- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, +- COMPHY_FW_MODE_2500BASEX), ++ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_1000BASEX), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX), + /* lane 2 */ +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), +- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, +- COMPHY_FW_MODE_USB3H), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS), ++}; ++ ++struct mvebu_a3700_comphy_priv { ++ void __iomem *comphy_regs; ++ void __iomem *lane0_phy_regs; /* USB3 and GbE1 */ ++ void __iomem *lane1_phy_regs; /* PCIe and GbE0 */ ++ void __iomem *lane2_phy_indirect; /* SATA and USB3 */ ++ spinlock_t lock; /* for PHY selector access */ ++ bool xtal_is_40m; + }; + + struct mvebu_a3700_comphy_lane { ++ struct mvebu_a3700_comphy_priv *priv; + struct device *dev; + unsigned int id; + enum phy_mode mode; + int submode; ++ bool invert_tx; ++ bool invert_rx; ++ bool needs_reset; ++}; ++ ++struct gbe_phy_init_data_fix { ++ u16 addr; ++ u16 value; ++}; ++ ++/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */ ++static struct gbe_phy_init_data_fix gbe_phy_init_fix[] = { ++ { 0x005, 0x07CC }, { 0x015, 0x0000 }, { 0x01B, 0x0000 }, ++ { 0x01D, 0x0000 }, { 0x01E, 0x0000 }, { 0x01F, 0x0000 }, ++ { 0x020, 0x0000 }, { 0x021, 0x0030 }, { 0x026, 0x0888 }, ++ { 0x04D, 0x0152 }, { 0x04F, 0xA020 }, { 0x050, 0x07CC }, ++ { 0x053, 0xE9CA }, { 0x055, 0xBD97 }, { 0x071, 0x3015 }, ++ { 0x076, 0x03AA }, { 0x07C, 0x0FDF }, { 0x0C2, 0x3030 }, ++ { 0x0C3, 0x8000 }, { 0x0E2, 0x5550 }, { 0x0E3, 0x12A4 }, ++ { 0x0E4, 0x7D00 }, { 0x0E6, 0x0C83 }, { 0x101, 0xFCC0 }, ++ { 0x104, 0x0C10 } + }; + +-static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, +- unsigned long mode) ++/* 40M1G25 mode init data */ ++static u16 gbe_phy_init[512] = { ++ /* 0 1 2 3 4 5 6 7 */ ++ /*-----------------------------------------------------------*/ ++ /* 8 9 A B C D E F */ ++ 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */ ++ 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */ ++ 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */ ++ 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */ ++ 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */ ++ 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */ ++ 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ ++ 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */ ++ 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */ ++ 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */ ++ 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */ ++ 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */ ++ 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */ ++ 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */ ++ 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */ ++ 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */ ++ 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */ ++ 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */ ++ 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */ ++ 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */ ++ 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */ ++ 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */ ++ 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */ ++ 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */ ++ 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */ ++ 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */ ++ 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */ ++ 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */ ++ 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */ ++ 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */ ++ 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */ ++ 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */ ++ 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */ ++ 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */ ++ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ ++}; ++ ++static inline void comphy_reg_set(void __iomem *addr, u32 data, u32 mask) + { +- struct arm_smccc_res res; +- s32 ret; ++ u32 val; ++ ++ val = readl(addr); ++ val = (val & ~mask) | (data & mask); ++ writel(val, addr); ++} + +- arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); +- ret = res.a0; ++static inline void comphy_reg_set16(void __iomem *addr, u16 data, u16 mask) ++{ ++ u16 val; + +- switch (ret) { +- case SMCCC_RET_SUCCESS: +- return 0; +- case SMCCC_RET_NOT_SUPPORTED: +- return -EOPNOTSUPP; ++ val = readw(addr); ++ val = (val & ~mask) | (data & mask); ++ writew(val, addr); ++} ++ ++/* Used for accessing lane 2 registers (SATA/USB3 PHY) */ ++static void comphy_set_indirect(struct mvebu_a3700_comphy_priv *priv, ++ u32 offset, u16 data, u16 mask) ++{ ++ writel(offset, ++ priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_ADDR); ++ comphy_reg_set(priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_DATA, ++ data, mask); ++} ++ ++static void comphy_lane_reg_set(struct mvebu_a3700_comphy_lane *lane, ++ u16 reg, u16 data, u16 mask) ++{ ++ if (lane->id == 2) { ++ /* lane 2 PHY registers are accessed indirectly */ ++ comphy_set_indirect(lane->priv, ++ reg + COMPHY_LANE2_REGS_BASE, ++ data, mask); ++ } else { ++ void __iomem *base = lane->id == 1 ? ++ lane->priv->lane1_phy_regs : ++ lane->priv->lane0_phy_regs; ++ ++ comphy_reg_set16(base + COMPHY_LANE_REG_DIRECT(reg), ++ data, mask); ++ } ++} ++ ++static int comphy_lane_reg_poll(struct mvebu_a3700_comphy_lane *lane, ++ u16 reg, u16 bits, ++ ulong sleep_us, ulong timeout_us) ++{ ++ int ret; ++ ++ if (lane->id == 2) { ++ u32 data; ++ ++ /* lane 2 PHY registers are accessed indirectly */ ++ writel(reg + COMPHY_LANE2_REGS_BASE, ++ lane->priv->lane2_phy_indirect + ++ COMPHY_LANE2_INDIR_ADDR); ++ ++ ret = readl_poll_timeout(lane->priv->lane2_phy_indirect + ++ COMPHY_LANE2_INDIR_DATA, ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++ } else { ++ void __iomem *base = lane->id == 1 ? ++ lane->priv->lane1_phy_regs : ++ lane->priv->lane0_phy_regs; ++ u16 data; ++ ++ ret = readw_poll_timeout(base + COMPHY_LANE_REG_DIRECT(reg), ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++ } ++ ++ return ret; ++} ++ ++static void comphy_periph_reg_set(struct mvebu_a3700_comphy_lane *lane, ++ u8 reg, u32 data, u32 mask) ++{ ++ comphy_reg_set(lane->priv->comphy_regs + COMPHY_PHY_REG(lane->id, reg), ++ data, mask); ++} ++ ++static int comphy_periph_reg_poll(struct mvebu_a3700_comphy_lane *lane, ++ u8 reg, u32 bits, ++ ulong sleep_us, ulong timeout_us) ++{ ++ u32 data; ++ ++ return readl_poll_timeout(lane->priv->comphy_regs + ++ COMPHY_PHY_REG(lane->id, reg), ++ data, (data & bits) == bits, ++ sleep_us, timeout_us); ++} ++ ++/* PHY selector configures with corresponding modes */ ++static int ++mvebu_a3700_comphy_set_phy_selector(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 old, new, clr = 0, set = 0; ++ unsigned long flags; ++ ++ switch (lane->mode) { ++ case PHY_MODE_SATA: ++ /* SATA must be in Lane2 */ ++ if (lane->id == 2) ++ clr = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_ETHERNET: ++ if (lane->id == 0) ++ clr = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; ++ else if (lane->id == 1) ++ clr = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_USB_HOST_SS: ++ if (lane->id == 2) ++ set = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; ++ else if (lane->id == 0) ++ set = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ case PHY_MODE_PCIE: ++ /* PCIE must be in Lane1 */ ++ if (lane->id == 1) ++ set = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; ++ else ++ goto error; ++ break; ++ ++ default: ++ goto error; ++ } ++ ++ spin_lock_irqsave(&lane->priv->lock, flags); ++ ++ old = readl(lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); ++ new = (old & ~clr) | set; ++ writel(new, lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); ++ ++ spin_unlock_irqrestore(&lane->priv->lock, flags); ++ ++ dev_dbg(lane->dev, ++ "COMPHY[%d] mode[%d] changed PHY selector 0x%08x -> 0x%08x\n", ++ lane->id, lane->mode, old, new); ++ ++ return 0; ++error: ++ dev_err(lane->dev, "COMPHY[%d] mode[%d] is invalid\n", lane->id, ++ lane->mode); ++ return -EINVAL; ++} ++ ++static int ++mvebu_a3700_comphy_sata_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, ref_clk; ++ int ret; ++ ++ /* Configure phy selector for SATA */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* Clear phy isolation mode to make it work in normal mode */ ++ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, ++ 0x0, PHY_ISOLATE_MODE); ++ ++ /* 0. Check the Polarity invert bits */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* 1. Select 40-bit data width */ ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, ++ DATA_WIDTH_40BIT, SEL_DATA_WIDTH_MASK); ++ ++ /* 2. Select reference clock(25M) and PHY mode (SATA) */ ++ if (lane->priv->xtal_is_40m) ++ ref_clk = REF_FREF_SEL_SERDES_40MHZ; ++ else ++ ref_clk = REF_FREF_SEL_SERDES_25MHZ; ++ ++ data = ref_clk | COMPHY_MODE_SATA; ++ mask = REF_FREF_SEL_MASK | COMPHY_MODE_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* 3. Use maximum PLL rate (no power save) */ ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, ++ USE_MAX_PLL_RATE_BIT, USE_MAX_PLL_RATE_BIT); ++ ++ /* 4. Reset reserved bit */ ++ comphy_set_indirect(lane->priv, COMPHY_RESERVED_REG, ++ 0x0, PHYCTRL_FRM_PIN_BIT); ++ ++ /* 5. Set vendor-specific configuration (It is done in sata driver) */ ++ /* XXX: in U-Boot below sequence was executed in this place, in Linux ++ * not. Now it is done only in U-Boot before this comphy ++ * initialization - tests shows that it works ok, but in case of any ++ * future problem it is left for reference. ++ * reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff); ++ * reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6)); ++ */ ++ ++ /* Wait for > 55 us to allow PLL be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ /* Polling status */ ++ ret = comphy_lane_reg_poll(lane, COMPHY_DIG_LOOPBACK_EN, ++ PLL_READY_TX_BIT, COMPHY_PLL_SLEEP, ++ COMPHY_PLL_TIMEOUT); ++ if (ret) ++ dev_err(lane->dev, "Failed to lock SATA PLL\n"); ++ ++ return ret; ++} ++ ++static void comphy_gbe_phy_init(struct mvebu_a3700_comphy_lane *lane, ++ bool is_1gbps) ++{ ++ int addr, fix_idx; ++ u16 val; ++ ++ fix_idx = 0; ++ for (addr = 0; addr < 512; addr++) { ++ /* ++ * All PHY register values are defined in full for 3.125Gbps ++ * SERDES speed. The values required for 1.25 Gbps are almost ++ * the same and only few registers should be "fixed" in ++ * comparison to 3.125 Gbps values. These register values are ++ * stored in "gbe_phy_init_fix" array. ++ */ ++ if (!is_1gbps && gbe_phy_init_fix[fix_idx].addr == addr) { ++ /* Use new value */ ++ val = gbe_phy_init_fix[fix_idx].value; ++ if (fix_idx < ARRAY_SIZE(gbe_phy_init_fix)) ++ fix_idx++; ++ } else { ++ val = gbe_phy_init[addr]; ++ } ++ ++ comphy_lane_reg_set(lane, addr, val, 0xFFFF); ++ } ++} ++ ++static int ++mvebu_a3700_comphy_ethernet_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, speed_sel; ++ int ret; ++ ++ /* Set selector */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* ++ * 1. Reset PHY by setting PHY input port PIN_RESET=1. ++ * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep ++ * PHY TXP/TXN output to idle state during PHY initialization ++ * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0. ++ */ ++ data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT; ++ mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT | ++ PIN_PU_TX_BIT | PHY_RX_INIT_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* 4. Release reset to the PHY by setting PIN_RESET=0. */ ++ data = 0x0; ++ mask = PIN_RESET_COMPHY_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY ++ * bit rate ++ */ ++ switch (lane->submode) { ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_1000BASEX: ++ /* SGMII 1G, SerDes speed 1.25G */ ++ speed_sel = SERDES_SPEED_1_25_G; ++ break; ++ case PHY_INTERFACE_MODE_2500BASEX: ++ /* 2500Base-X, SerDes speed 3.125G */ ++ speed_sel = SERDES_SPEED_3_125_G; ++ break; + default: ++ /* Other rates are not supported */ ++ dev_err(lane->dev, ++ "unsupported phy speed %d on comphy lane%d\n", ++ lane->submode, lane->id); + return -EINVAL; + } ++ data = GEN_RX_SEL_VALUE(speed_sel) | GEN_TX_SEL_VALUE(speed_sel); ++ mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 6. Wait 10mS for bandgap and reference clocks to stabilize; then ++ * start SW programming. ++ */ ++ mdelay(10); ++ ++ /* 7. Program COMPHY register PHY_MODE */ ++ data = COMPHY_MODE_SERDES; ++ mask = COMPHY_MODE_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* ++ * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK ++ * source ++ */ ++ data = 0x0; ++ mask = PHY_REF_CLK_SEL; ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); ++ ++ /* ++ * 9. Set correct reference clock frequency in COMPHY register ++ * REF_FREF_SEL. ++ */ ++ if (lane->priv->xtal_is_40m) ++ data = REF_FREF_SEL_SERDES_50MHZ; ++ else ++ data = REF_FREF_SEL_SERDES_25MHZ; ++ ++ mask = REF_FREF_SEL_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* ++ * 10. Program COMPHY register PHY_GEN_MAX[1:0] ++ * This step is mentioned in the flow received from verification team. ++ * However the PHY_GEN_MAX value is only meaningful for other interfaces ++ * (not SERDES). For instance, it selects SATA speed 1.5/3/6 Gbps or ++ * PCIe speed 2.5/5 Gbps ++ */ ++ ++ /* ++ * 11. Program COMPHY register SEL_BITS to set correct parallel data ++ * bus width ++ */ ++ data = DATA_WIDTH_10BIT; ++ mask = SEL_DATA_WIDTH_MASK; ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, data, mask); ++ ++ /* ++ * 12. As long as DFE function needs to be enabled in any mode, ++ * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F ++ * for real chip during COMPHY power on. ++ * The value of the DFE_UPDATE_EN already is 0x3F, because it is the ++ * default value after reset of the PHY. ++ */ ++ ++ /* ++ * 13. Program COMPHY GEN registers. ++ * These registers should be programmed based on the lab testing result ++ * to achieve optimal performance. Please contact the CEA group to get ++ * the related GEN table during real chip bring-up. We only required to ++ * run though the entire registers programming flow defined by ++ * "comphy_gbe_phy_init" when the REF clock is 40 MHz. For REF clock ++ * 25 MHz the default values stored in PHY registers are OK. ++ */ ++ dev_dbg(lane->dev, "Running C-DPI phy init %s mode\n", ++ lane->submode == PHY_INTERFACE_MODE_2500BASEX ? "2G5" : "1G"); ++ if (lane->priv->xtal_is_40m) ++ comphy_gbe_phy_init(lane, ++ lane->submode != PHY_INTERFACE_MODE_2500BASEX); ++ ++ /* ++ * 14. Check the PHY Polarity invert bit ++ */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* ++ * 15. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to ++ * start PHY power up sequence. All the PHY register programming should ++ * be done before PIN_PU_PLL=1. There should be no register programming ++ * for normal PHY operation from this point. ++ */ ++ data = PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; ++ mask = data; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ ++ /* ++ * 16. Wait for PHY power up sequence to finish by checking output ports ++ * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1. ++ */ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_PLL_READY_TX_BIT | ++ PHY_PLL_READY_RX_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", ++ lane->id); ++ return ret; ++ } ++ ++ /* ++ * 17. Set COMPHY input port PIN_TX_IDLE=0 ++ */ ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, 0x0, PIN_TX_IDLE_BIT); ++ ++ /* ++ * 18. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To ++ * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the ++ * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to ++ * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please ++ * refer to RX initialization part for details. ++ */ ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, ++ PHY_RX_INIT_BIT, PHY_RX_INIT_BIT); ++ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_PLL_READY_TX_BIT | ++ PHY_PLL_READY_RX_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) { ++ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", ++ lane->id); ++ return ret; ++ } ++ ++ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, ++ PHY_RX_INIT_DONE_BIT, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) ++ dev_err(lane->dev, "Failed to init RX of SERDES PHY %d\n", ++ lane->id); ++ ++ return ret; + } + +-static int mvebu_a3700_comphy_get_fw_mode(int lane, ++static int ++mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, cfg, ref_clk; ++ int ret; ++ ++ /* Set phy seclector */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* ++ * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The ++ * register belong to UTMI module, so it is set in UTMI phy driver. ++ */ ++ ++ /* ++ * 1. Set PRD_TXDEEMPH (3.5db de-emph) ++ */ ++ data = PRD_TXDEEMPH0_MASK; ++ mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK | ++ CFG_TX_ALIGN_POS_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG0, data, mask); ++ ++ /* ++ * 2. Set BIT0: enable transmitter in high impedance mode ++ * Set BIT[3:4]: delay 2 clock cycles for HiZ off latency ++ * Set BIT6: Tx detect Rx at HiZ mode ++ * Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db ++ * together with bit 0 of COMPHY_PIPE_LANE_CFG0 register ++ */ ++ data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN; ++ mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK | ++ TX_ELEC_IDLE_MODE_EN; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, data, mask); ++ ++ /* ++ * 3. Set Spread Spectrum Clock Enabled ++ */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG4, ++ SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN); ++ ++ /* ++ * 4. Set Override Margining Controls From the MAC: ++ * Use margining signals from lane configuration ++ */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_TEST_MODE_CTRL, ++ MODE_MARGIN_OVERRIDE, 0xFFFF); ++ ++ /* ++ * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles ++ * set Mode Clock Source = PCLK is generated from REFCLK ++ */ ++ data = 0x0; ++ mask = MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE_MASK | ++ BUNDLE_SAMPLE_CTRL | PLL_READY_DLY_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, data, mask); ++ ++ /* ++ * 6. Set G2 Spread Spectrum Clock Amplitude at 4K ++ */ ++ comphy_lane_reg_set(lane, COMPHY_GEN2_SET2, ++ GS2_TX_SSC_AMP_4128, GS2_TX_SSC_AMP_MASK); ++ ++ /* ++ * 7. Unset G3 Spread Spectrum Clock Amplitude ++ * set G3 TX and RX Register Master Current Select ++ */ ++ data = GS2_VREG_RXTX_MAS_ISET_60U; ++ mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK | ++ GS2_RSVD_6_0_MASK; ++ comphy_lane_reg_set(lane, COMPHY_GEN3_SET2, data, mask); ++ ++ /* ++ * 8. Check crystal jumper setting and program the Power and PLL Control ++ * accordingly Change RX wait ++ */ ++ if (lane->priv->xtal_is_40m) { ++ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; ++ cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT; ++ } else { ++ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; ++ cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT; ++ } ++ ++ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_USB3 | ref_clk; ++ mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | COMPHY_MODE_MASK | ++ REF_FREF_SEL_MASK; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg; ++ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | ++ CFG_PM_RXDLOZ_WAIT_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); ++ ++ /* ++ * 9. Enable idle sync ++ */ ++ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, ++ IDLE_SYNC_EN, IDLE_SYNC_EN); ++ ++ /* ++ * 10. Enable the output of 500M clock ++ */ ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, CLK500M_EN, CLK500M_EN); ++ ++ /* ++ * 11. Set 20-bit data width ++ */ ++ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, ++ DATA_WIDTH_20BIT, 0xFFFF); ++ ++ /* ++ * 12. Override Speed_PLL value and use MAC PLL ++ */ ++ data = SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, data, mask); ++ ++ /* ++ * 13. Check the Polarity invert bit ++ */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* ++ * 14. Set max speed generation to USB3.0 5Gbps ++ */ ++ comphy_lane_reg_set(lane, COMPHY_SYNC_MASK_GEN, ++ PHY_GEN_MAX_USB3_5G, PHY_GEN_MAX_MASK); ++ ++ /* ++ * 15. Set capacitor value for FFE gain peaking to 0xF ++ */ ++ comphy_lane_reg_set(lane, COMPHY_GEN2_SET3, ++ GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK); ++ ++ /* ++ * 16. Release SW reset ++ */ ++ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Wait for > 55 us to allow PCLK be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) ++ dev_err(lane->dev, "Failed to lock USB3 PLL\n"); ++ ++ return ret; ++} ++ ++static int ++mvebu_a3700_comphy_pcie_power_on(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data, ref_clk; ++ int ret; ++ ++ /* Configure phy selector for PCIe */ ++ ret = mvebu_a3700_comphy_set_phy_selector(lane); ++ if (ret) ++ return ret; ++ ++ /* 1. Enable max PLL. */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, ++ USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN); ++ ++ /* 2. Select 20 bit SERDES interface. */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, ++ CFG_SEL_20B, CFG_SEL_20B); ++ ++ /* 3. Force to use reg setting for PCIe mode */ ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL1, ++ SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE); ++ ++ /* 4. Change RX wait */ ++ data = CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT; ++ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | ++ CFG_PM_RXDLOZ_WAIT_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); ++ ++ /* 5. Enable idle sync */ ++ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, ++ IDLE_SYNC_EN, IDLE_SYNC_EN); ++ ++ /* 6. Enable the output of 100M/125M/500M clock */ ++ data = CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN; ++ mask = data; ++ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); ++ ++ /* ++ * 7. Enable TX, PCIE global register, 0xd0074814, it is done in ++ * PCI-E driver ++ */ ++ ++ /* ++ * 8. Check crystal jumper setting and program the Power and PLL ++ * Control accordingly ++ */ ++ ++ if (lane->priv->xtal_is_40m) ++ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; ++ else ++ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; ++ ++ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | ++ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_PCIE | ref_clk; ++ mask = 0xFFFF; ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); ++ ++ /* 9. Override Speed_PLL value and use MAC PLL */ ++ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, ++ SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, ++ 0xFFFF); ++ ++ /* 10. Check the Polarity invert bit */ ++ data = 0x0; ++ if (lane->invert_tx) ++ data |= TXD_INVERT_BIT; ++ if (lane->invert_rx) ++ data |= RXD_INVERT_BIT; ++ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; ++ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); ++ ++ /* 11. Release SW reset */ ++ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32; ++ mask = data | PIPE_SOFT_RESET | MODE_REFDIV_MASK; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Wait for > 55 us to allow PCLK be enabled */ ++ udelay(PLL_SET_DELAY_US); ++ ++ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, ++ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); ++ if (ret) ++ dev_err(lane->dev, "Failed to lock PCIE PLL\n"); ++ ++ return ret; ++} ++ ++static void ++mvebu_a3700_comphy_sata_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ /* Set phy isolation mode */ ++ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, ++ PHY_ISOLATE_MODE, PHY_ISOLATE_MODE); ++ ++ /* Power off PLL, Tx, Rx */ ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, ++ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); ++} ++ ++static void ++mvebu_a3700_comphy_ethernet_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ u32 mask, data; ++ ++ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | PIN_PU_IVREF_BIT | ++ PHY_RX_INIT_BIT; ++ mask = data; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++} ++ ++static void ++mvebu_a3700_comphy_pcie_power_off(struct mvebu_a3700_comphy_lane *lane) ++{ ++ /* Power off PLL, Tx, Rx */ ++ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, ++ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); ++} ++ ++static int mvebu_a3700_comphy_reset(struct phy *phy) ++{ ++ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); ++ u16 mask, data; ++ ++ dev_dbg(lane->dev, "resetting lane %d\n", lane->id); ++ ++ /* COMPHY reset for internal logic */ ++ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, ++ SFT_RST_NO_REG, SFT_RST_NO_REG); ++ ++ /* COMPHY register reset (cleared automatically) */ ++ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST); ++ ++ /* PIPE soft and register reset */ ++ data = PIPE_SOFT_RESET | PIPE_REG_RESET; ++ mask = data; ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); ++ ++ /* Release PIPE register reset */ ++ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, ++ 0x0, PIPE_REG_RESET); ++ ++ /* Reset SB configuration register (only for lanes 0 and 1) */ ++ if (lane->id == 0 || lane->id == 1) { ++ u32 mask, data; ++ ++ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | ++ PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; ++ mask = data | PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT; ++ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); ++ } ++ ++ return 0; ++} ++ ++static bool mvebu_a3700_comphy_check_mode(int lane, + enum phy_mode mode, + int submode) + { +@@ -122,7 +1141,7 @@ static int mvebu_a3700_comphy_get_fw_mod + + /* Unused PHY mux value is 0x0 */ + if (mode == PHY_MODE_INVALID) +- return -EINVAL; ++ return false; + + for (i = 0; i < n; i++) { + if (mvebu_a3700_comphy_modes[i].lane == lane && +@@ -132,27 +1151,30 @@ static int mvebu_a3700_comphy_get_fw_mod + } + + if (i == n) +- return -EINVAL; ++ return false; + +- return mvebu_a3700_comphy_modes[i].fw_mode; ++ return true; + } + + static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, + int submode) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- int fw_mode; + +- if (submode == PHY_INTERFACE_MODE_1000BASEX) +- submode = PHY_INTERFACE_MODE_SGMII; +- +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, +- submode); +- if (fw_mode < 0) { ++ if (!mvebu_a3700_comphy_check_mode(lane->id, mode, submode)) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +- return fw_mode; ++ return -EINVAL; + } + ++ /* Mode cannot be changed while the PHY is powered on */ ++ if (phy->power_count && ++ (lane->mode != mode || lane->submode != submode)) ++ return -EBUSY; ++ ++ /* If changing mode, ensure reset is called */ ++ if (lane->mode != PHY_MODE_INVALID && lane->mode != mode) ++ lane->needs_reset = true; ++ + /* Just remember the mode, ->power_on() will do the real setup */ + lane->mode = mode; + lane->submode = submode; +@@ -163,76 +1185,77 @@ static int mvebu_a3700_comphy_set_mode(s + static int mvebu_a3700_comphy_power_on(struct phy *phy) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- u32 fw_param; +- int fw_mode; +- int fw_port; + int ret; + +- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, +- lane->mode, lane->submode); +- if (fw_mode < 0) { ++ if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode, ++ lane->submode)) { + dev_err(lane->dev, "invalid COMPHY mode\n"); +- return fw_mode; ++ return -EINVAL; ++ } ++ ++ if (lane->needs_reset) { ++ ret = mvebu_a3700_comphy_reset(phy); ++ if (ret) ++ return ret; ++ ++ lane->needs_reset = false; + } + + switch (lane->mode) { + case PHY_MODE_USB_HOST_SS: + dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); +- fw_param = COMPHY_FW_MODE(fw_mode); +- break; ++ return mvebu_a3700_comphy_usb3_power_on(lane); + case PHY_MODE_SATA: + dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id); +- fw_param = COMPHY_FW_MODE(fw_mode); +- break; ++ return mvebu_a3700_comphy_sata_power_on(lane); + case PHY_MODE_ETHERNET: +- fw_port = (lane->id == 0) ? 1 : 0; +- switch (lane->submode) { +- case PHY_INTERFACE_MODE_SGMII: +- dev_dbg(lane->dev, "set lane %d to SGMII mode\n", +- lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, fw_port, +- COMPHY_FW_SPEED_1_25G); +- break; +- case PHY_INTERFACE_MODE_2500BASEX: +- dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", +- lane->id); +- fw_param = COMPHY_FW_NET(fw_mode, fw_port, +- COMPHY_FW_SPEED_3_125G); +- break; +- default: +- dev_err(lane->dev, "unsupported PHY submode (%d)\n", +- lane->submode); +- return -ENOTSUPP; +- } +- break; ++ dev_dbg(lane->dev, "set lane %d to Ethernet mode\n", lane->id); ++ return mvebu_a3700_comphy_ethernet_power_on(lane); + case PHY_MODE_PCIE: + dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); +- fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, +- phy->attrs.bus_width); +- break; ++ return mvebu_a3700_comphy_pcie_power_on(lane); + default: + dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode); +- return -ENOTSUPP; ++ return -EOPNOTSUPP; + } +- +- ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param); +- if (ret == -EOPNOTSUPP) +- dev_err(lane->dev, +- "unsupported SMC call, try updating your firmware\n"); +- +- return ret; + } + + static int mvebu_a3700_comphy_power_off(struct phy *phy) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); + +- return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0); ++ switch (lane->mode) { ++ case PHY_MODE_USB_HOST_SS: ++ /* ++ * The USB3 MAC sets the USB3 PHY to low state, so we do not ++ * need to power off USB3 PHY again. ++ */ ++ break; ++ ++ case PHY_MODE_SATA: ++ mvebu_a3700_comphy_sata_power_off(lane); ++ break; ++ ++ case PHY_MODE_ETHERNET: ++ mvebu_a3700_comphy_ethernet_power_off(lane); ++ break; ++ ++ case PHY_MODE_PCIE: ++ mvebu_a3700_comphy_pcie_power_off(lane); ++ break; ++ ++ default: ++ dev_err(lane->dev, "invalid COMPHY mode\n"); ++ return -EINVAL; ++ } ++ ++ return 0; + } + + static const struct phy_ops mvebu_a3700_comphy_ops = { + .power_on = mvebu_a3700_comphy_power_on, + .power_off = mvebu_a3700_comphy_power_off, ++ .reset = mvebu_a3700_comphy_reset, + .set_mode = mvebu_a3700_comphy_set_mode, + .owner = THIS_MODULE, + }; +@@ -256,13 +1279,75 @@ static struct phy *mvebu_a3700_comphy_xl + return ERR_PTR(-EINVAL); + } + ++ lane->invert_tx = args->args[1] & BIT(0); ++ lane->invert_rx = args->args[1] & BIT(1); ++ + return phy; + } + + static int mvebu_a3700_comphy_probe(struct platform_device *pdev) + { ++ struct mvebu_a3700_comphy_priv *priv; + struct phy_provider *provider; + struct device_node *child; ++ struct resource *res; ++ struct clk *clk; ++ int ret; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ spin_lock_init(&priv->lock); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "comphy"); ++ priv->comphy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->comphy_regs)) ++ return PTR_ERR(priv->comphy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane1_pcie_gbe"); ++ priv->lane1_phy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane1_phy_regs)) ++ return PTR_ERR(priv->lane1_phy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane0_usb3_gbe"); ++ priv->lane0_phy_regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane0_phy_regs)) ++ return PTR_ERR(priv->lane0_phy_regs); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "lane2_sata_usb3"); ++ priv->lane2_phy_indirect = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(priv->lane2_phy_indirect)) ++ return PTR_ERR(priv->lane2_phy_indirect); ++ ++ /* ++ * Driver needs to know if reference xtal clock is 40MHz or 25MHz. ++ * Old DT bindings do not have xtal clk present. So do not fail here ++ * and expects that default 25MHz reference clock is used. ++ */ ++ clk = clk_get(&pdev->dev, "xtal"); ++ if (IS_ERR(clk)) { ++ if (PTR_ERR(clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; ++ dev_warn(&pdev->dev, "missing 'xtal' clk (%ld)\n", ++ PTR_ERR(clk)); ++ } else { ++ ret = clk_prepare_enable(clk); ++ if (ret) { ++ dev_warn(&pdev->dev, "enabling xtal clk failed (%d)\n", ++ ret); ++ } else { ++ if (clk_get_rate(clk) == 40000000) ++ priv->xtal_is_40m = true; ++ clk_disable_unprepare(clk); ++ } ++ clk_put(clk); ++ } ++ ++ dev_set_drvdata(&pdev->dev, priv); + + for_each_available_child_of_node(pdev->dev.of_node, child) { + struct mvebu_a3700_comphy_lane *lane; +@@ -277,7 +1362,7 @@ static int mvebu_a3700_comphy_probe(stru + continue; + } + +- if (lane_id >= MVEBU_A3700_COMPHY_LANES) { ++ if (lane_id >= 3) { + dev_err(&pdev->dev, "invalid 'reg' property\n"); + continue; + } +@@ -295,15 +1380,26 @@ static int mvebu_a3700_comphy_probe(stru + return PTR_ERR(phy); + } + ++ lane->priv = priv; + lane->dev = &pdev->dev; + lane->mode = PHY_MODE_INVALID; + lane->submode = PHY_INTERFACE_MODE_NA; + lane->id = lane_id; ++ lane->invert_tx = false; ++ lane->invert_rx = false; + phy_set_drvdata(phy, lane); ++ ++ /* ++ * To avoid relying on the bootloader/firmware configuration, ++ * power off all comphys. ++ */ ++ mvebu_a3700_comphy_reset(phy); ++ lane->needs_reset = false; + } + + provider = devm_of_phy_provider_register(&pdev->dev, + mvebu_a3700_comphy_xlate); ++ + return PTR_ERR_OR_ZERO(provider); + } + +@@ -323,5 +1419,7 @@ static struct platform_driver mvebu_a370 + module_platform_driver(mvebu_a3700_comphy_driver); + + MODULE_AUTHOR("Miquèl Raynal "); ++MODULE_AUTHOR("Pali Rohár "); ++MODULE_AUTHOR("Marek Behún "); + MODULE_DESCRIPTION("Common PHY driver for A3700"); + MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/backport-5.15/345-v5.17-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch b/target/linux/generic/backport-5.15/345-v5.17-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch new file mode 100644 index 0000000000..03b6a5754d --- /dev/null +++ b/target/linux/generic/backport-5.15/345-v5.17-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch @@ -0,0 +1,32 @@ +From 73a78b6130d9e13daca22b86ad52f063b9403e03 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Wed, 8 Dec 2021 03:40:35 +0100 +Subject: [PATCH 1/1] arm64: dts: marvell: armada-37xx: Add xtal clock to + comphy node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the +reference xtal clock. So add missing xtal clock source into comphy device +tree node. If the property is not present, the driver defaults to 25 MHz +xtal rate (which, as far as we know, is used by all the existing boards). + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Signed-off-by: Gregory CLEMENT +--- + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +@@ -265,6 +265,8 @@ + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; ++ clocks = <&xtalclk>; ++ clock-names = "xtal"; + + comphy0: phy@0 { + reg = <0>; diff --git a/target/linux/generic/backport-5.15/346-v5.18-01-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch b/target/linux/generic/backport-5.15/346-v5.18-01-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch new file mode 100644 index 0000000000..b254e7c0b3 --- /dev/null +++ b/target/linux/generic/backport-5.15/346-v5.18-01-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch @@ -0,0 +1,64 @@ +From ee995101fde67f85a3cd4c74f4f92fc4592e726b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 3 Feb 2022 22:44:42 +0100 +Subject: [PATCH 1/3] Revert "ata: ahci: mvebu: Make SATA PHY optional for + Armada 3720" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9. + +Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data. + +AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so +remove this flag completely. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +Acked-by: Damien Le Moal +Link: https://lore.kernel.org/r/20220203214444.1508-4-kabel@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/ata/ahci.h | 2 -- + drivers/ata/ahci_mvebu.c | 2 +- + drivers/ata/libahci_platform.c | 2 +- + 3 files changed, 2 insertions(+), 4 deletions(-) + +--- a/drivers/ata/ahci.h ++++ b/drivers/ata/ahci.h +@@ -240,8 +240,6 @@ enum { + as default lpm_policy */ + AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during + suspend/resume */ +- AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP +- from phy_power_on() */ + AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ + + /* ap->flags bits */ +--- a/drivers/ata/ahci_mvebu.c ++++ b/drivers/ata/ahci_mvebu.c +@@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data + + static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { + .plat_config = ahci_mvebu_armada_3700_config, +- .flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON, ++ .flags = AHCI_HFLAG_SUSPEND_PHYS, + }; + + static const struct of_device_id ahci_mvebu_of_match[] = { +--- a/drivers/ata/libahci_platform.c ++++ b/drivers/ata/libahci_platform.c +@@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahc + } + + rc = phy_power_on(hpriv->phys[i]); +- if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) { ++ if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } diff --git a/target/linux/generic/backport-5.15/346-v5.18-02-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch b/target/linux/generic/backport-5.15/346-v5.18-02-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch new file mode 100644 index 0000000000..1e8afb7bbf --- /dev/null +++ b/target/linux/generic/backport-5.15/346-v5.18-02-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch @@ -0,0 +1,166 @@ +From 8e10548f7f4814e530857d2049d6af6bc78add53 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 3 Feb 2022 22:44:43 +0100 +Subject: [PATCH 2/3] Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional + for Armada 3720" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. + +Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and +then also whole xhci_mvebu_a3700_plat_setup() function which is there just +to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. + +xhci plat_setup callback is not used by any other xhci plat driver, so +remove this callback completely. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +Acked-by: Greg Kroah-Hartman +Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/usb/host/xhci-mvebu.c | 42 ----------------------------------- + drivers/usb/host/xhci-mvebu.h | 6 ----- + drivers/usb/host/xhci-plat.c | 20 +---------------- + drivers/usb/host/xhci-plat.h | 1 - + 4 files changed, 1 insertion(+), 68 deletions(-) + +--- a/drivers/usb/host/xhci-mvebu.c ++++ b/drivers/usb/host/xhci-mvebu.c +@@ -8,7 +8,6 @@ + #include + #include + #include +-#include + + #include + #include +@@ -74,47 +73,6 @@ int xhci_mvebu_mbus_init_quirk(struct us + + return 0; + } +- +-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +-{ +- struct xhci_hcd *xhci = hcd_to_xhci(hcd); +- struct device *dev = hcd->self.controller; +- struct phy *phy; +- int ret; +- +- /* Old bindings miss the PHY handle */ +- phy = of_phy_get(dev->of_node, "usb3-phy"); +- if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) +- return -EPROBE_DEFER; +- else if (IS_ERR(phy)) +- goto phy_out; +- +- ret = phy_init(phy); +- if (ret) +- goto phy_put; +- +- ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); +- if (ret) +- goto phy_exit; +- +- ret = phy_power_on(phy); +- if (ret == -EOPNOTSUPP) { +- /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ +- dev_warn(dev, "PHY unsupported by firmware\n"); +- xhci->quirks |= XHCI_SKIP_PHY_INIT; +- } +- if (ret) +- goto phy_exit; +- +- phy_power_off(phy); +-phy_exit: +- phy_exit(phy); +-phy_put: +- of_phy_put(phy); +-phy_out: +- +- return 0; +-} + + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) + { +--- a/drivers/usb/host/xhci-mvebu.h ++++ b/drivers/usb/host/xhci-mvebu.h +@@ -12,18 +12,12 @@ struct usb_hcd; + + #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) + int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); + #else + static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) + { + return 0; + } +- +-static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +-{ +- return 0; +-} + + static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) + { +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -44,16 +44,6 @@ static void xhci_priv_plat_start(struct + priv->plat_start(hcd); + } + +-static int xhci_priv_plat_setup(struct usb_hcd *hcd) +-{ +- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); +- +- if (!priv->plat_setup) +- return 0; +- +- return priv->plat_setup(hcd); +-} +- + static int xhci_priv_init_quirk(struct usb_hcd *hcd) + { + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); +@@ -121,7 +111,6 @@ static const struct xhci_plat_priv xhci_ + }; + + static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { +- .plat_setup = xhci_mvebu_a3700_plat_setup, + .init_quirk = xhci_mvebu_a3700_init_quirk, + }; + +@@ -341,14 +330,7 @@ static int xhci_plat_probe(struct platfo + + hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); + xhci->shared_hcd->tpl_support = hcd->tpl_support; +- +- if (priv) { +- ret = xhci_priv_plat_setup(hcd); +- if (ret) +- goto disable_usb_phy; +- } +- +- if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) ++ if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) + hcd->skip_phy_initialization = 1; + + if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) +--- a/drivers/usb/host/xhci-plat.h ++++ b/drivers/usb/host/xhci-plat.h +@@ -13,7 +13,6 @@ + struct xhci_plat_priv { + const char *firmware_name; + unsigned long long quirks; +- int (*plat_setup)(struct usb_hcd *); + void (*plat_start)(struct usb_hcd *); + int (*init_quirk)(struct usb_hcd *); + int (*suspend_quirk)(struct usb_hcd *); diff --git a/target/linux/generic/backport-5.15/346-v5.18-03-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch b/target/linux/generic/backport-5.15/346-v5.18-03-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch new file mode 100644 index 0000000000..fcfb02d35a --- /dev/null +++ b/target/linux/generic/backport-5.15/346-v5.18-03-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch @@ -0,0 +1,39 @@ +From 9a4556dad7bd0a6b8339cb72e169f5c76f2af6f1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Thu, 3 Feb 2022 22:44:44 +0100 +Subject: [PATCH 3/3] Revert "PCI: aardvark: Fix initialization with old + Marvell's Arm Trusted Firmware" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6. + +Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return +-EOPNOTSUPP from phy_power_on() callback anymore. + +So remove dead code which handles -EOPNOTSUPP return value. + +Signed-off-by: Pali Rohár +Signed-off-by: Marek Behún +Acked-by: Miquel Raynal +Acked-by: Lorenzo Pieralisi +Link: https://lore.kernel.org/r/20220203214444.1508-6-kabel@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/pci/controller/pci-aardvark.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -1642,9 +1642,7 @@ static int advk_pcie_enable_phy(struct a + } + + ret = phy_power_on(pcie->phy); +- if (ret == -EOPNOTSUPP) { +- dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); +- } else if (ret) { ++ if (ret) { + phy_exit(pcie->phy); + return ret; + } diff --git a/target/linux/generic/backport-5.15/347-v6.0-phy-marvell-phy-mvebu-a3700-comphy-Remove-broken-res.patch b/target/linux/generic/backport-5.15/347-v6.0-phy-marvell-phy-mvebu-a3700-comphy-Remove-broken-res.patch new file mode 100644 index 0000000000..a2c897b7a9 --- /dev/null +++ b/target/linux/generic/backport-5.15/347-v6.0-phy-marvell-phy-mvebu-a3700-comphy-Remove-broken-res.patch @@ -0,0 +1,194 @@ +From 0a6fc70d76bddf98278af2ac000379c82aec8f11 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Pali=20Roh=C3=A1r?= +Date: Mon, 29 Aug 2022 10:30:46 +0200 +Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset + support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Reset support for SATA PHY is somehow broken and after calling it, kernel +is not able to detect and initialize SATA disk Samsung SSD 850 EMT0 [1]. + +Reset support was introduced in commit 934337080c6c ("phy: marvell: +phy-mvebu-a3700-comphy: Add native kernel implementation") as part of +complete rewrite of this driver. v1 patch series of that commit [2] did +not contain reset support and was tested that is working fine with +Ethernet, SATA and USB PHYs without issues too. + +So for now remove broken reset support and change implementation of +power_off callback to power off all functions on specified lane (and not +only selected function) because during startup kernel does not know which +function was selected and configured by bootloader. Same logic was used +also in v1 patch series of that commit. + +This change fixes issues with initialization of SATA disk Samsung SSD 850 +and disk is working again, like before mentioned commit. + +Once problem with PHY reset callback is solved its functionality could be +re-introduced. But for now it is unknown why it does not work. + +[1] - https://lore.kernel.org/r/20220531124159.3e4lgn2v462irbtz@shindev/ +[2] - https://lore.kernel.org/r/20211028184242.22105-1-kabel@kernel.org/ + +Reported-by: Shinichiro Kawasaki +Fixes: 934337080c6c ("phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation") +Cc: stable@vger.kernel.org # v5.18+ +Signed-off-by: Pali Rohár +Tested-by: Shinichiro Kawasaki +Link: https://lore.kernel.org/r/20220829083046.15082-1-pali@kernel.org +Signed-off-by: Vinod Koul +--- + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 87 ++++---------------- + 1 file changed, 17 insertions(+), 70 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -274,7 +274,6 @@ struct mvebu_a3700_comphy_lane { + int submode; + bool invert_tx; + bool invert_rx; +- bool needs_reset; + }; + + struct gbe_phy_init_data_fix { +@@ -1097,40 +1096,12 @@ mvebu_a3700_comphy_pcie_power_off(struct + 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); + } + +-static int mvebu_a3700_comphy_reset(struct phy *phy) ++static void mvebu_a3700_comphy_usb3_power_off(struct mvebu_a3700_comphy_lane *lane) + { +- struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- u16 mask, data; +- +- dev_dbg(lane->dev, "resetting lane %d\n", lane->id); +- +- /* COMPHY reset for internal logic */ +- comphy_lane_reg_set(lane, COMPHY_SFT_RESET, +- SFT_RST_NO_REG, SFT_RST_NO_REG); +- +- /* COMPHY register reset (cleared automatically) */ +- comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST); +- +- /* PIPE soft and register reset */ +- data = PIPE_SOFT_RESET | PIPE_REG_RESET; +- mask = data; +- comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); +- +- /* Release PIPE register reset */ +- comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, +- 0x0, PIPE_REG_RESET); +- +- /* Reset SB configuration register (only for lanes 0 and 1) */ +- if (lane->id == 0 || lane->id == 1) { +- u32 mask, data; +- +- data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | +- PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; +- mask = data | PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT; +- comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); +- } +- +- return 0; ++ /* ++ * The USB3 MAC sets the USB3 PHY to low state, so we do not ++ * need to power off USB3 PHY again. ++ */ + } + + static bool mvebu_a3700_comphy_check_mode(int lane, +@@ -1171,10 +1142,6 @@ static int mvebu_a3700_comphy_set_mode(s + (lane->mode != mode || lane->submode != submode)) + return -EBUSY; + +- /* If changing mode, ensure reset is called */ +- if (lane->mode != PHY_MODE_INVALID && lane->mode != mode) +- lane->needs_reset = true; +- + /* Just remember the mode, ->power_on() will do the real setup */ + lane->mode = mode; + lane->submode = submode; +@@ -1185,7 +1152,6 @@ static int mvebu_a3700_comphy_set_mode(s + static int mvebu_a3700_comphy_power_on(struct phy *phy) + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); +- int ret; + + if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode, + lane->submode)) { +@@ -1193,14 +1159,6 @@ static int mvebu_a3700_comphy_power_on(s + return -EINVAL; + } + +- if (lane->needs_reset) { +- ret = mvebu_a3700_comphy_reset(phy); +- if (ret) +- return ret; +- +- lane->needs_reset = false; +- } +- + switch (lane->mode) { + case PHY_MODE_USB_HOST_SS: + dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); +@@ -1224,38 +1182,28 @@ static int mvebu_a3700_comphy_power_off( + { + struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); + +- switch (lane->mode) { +- case PHY_MODE_USB_HOST_SS: +- /* +- * The USB3 MAC sets the USB3 PHY to low state, so we do not +- * need to power off USB3 PHY again. +- */ +- break; +- +- case PHY_MODE_SATA: +- mvebu_a3700_comphy_sata_power_off(lane); +- break; +- +- case PHY_MODE_ETHERNET: ++ switch (lane->id) { ++ case 0: ++ mvebu_a3700_comphy_usb3_power_off(lane); + mvebu_a3700_comphy_ethernet_power_off(lane); +- break; +- +- case PHY_MODE_PCIE: ++ return 0; ++ case 1: + mvebu_a3700_comphy_pcie_power_off(lane); +- break; +- ++ mvebu_a3700_comphy_ethernet_power_off(lane); ++ return 0; ++ case 2: ++ mvebu_a3700_comphy_usb3_power_off(lane); ++ mvebu_a3700_comphy_sata_power_off(lane); ++ return 0; + default: + dev_err(lane->dev, "invalid COMPHY mode\n"); + return -EINVAL; + } +- +- return 0; + } + + static const struct phy_ops mvebu_a3700_comphy_ops = { + .power_on = mvebu_a3700_comphy_power_on, + .power_off = mvebu_a3700_comphy_power_off, +- .reset = mvebu_a3700_comphy_reset, + .set_mode = mvebu_a3700_comphy_set_mode, + .owner = THIS_MODULE, + }; +@@ -1393,8 +1341,7 @@ static int mvebu_a3700_comphy_probe(stru + * To avoid relying on the bootloader/firmware configuration, + * power off all comphys. + */ +- mvebu_a3700_comphy_reset(phy); +- lane->needs_reset = false; ++ mvebu_a3700_comphy_power_off(phy); + } + + provider = devm_of_phy_provider_register(&pdev->dev, diff --git a/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch b/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch deleted file mode 100644 index 4a963be952..0000000000 --- a/target/linux/generic/pending-5.15/851-0001-phy-marvell-phy-mvebu-a3700-comphy-Remove-port-from-.patch +++ /dev/null @@ -1,217 +0,0 @@ -From a719f7ba7fcba05d85801c6f0267f389a21627c1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Fri, 24 Sep 2021 13:03:02 +0200 -Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver - configuration -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Port number is encoded into argument for SMC call. It is zero for SATA, -PCIe and also both USB 3.0 PHYs. It is non-zero only for Ethernet PHY -(incorrectly called SGMII) on lane 0. Ethernet PHY on lane 1 also uses zero -port number. - -So construct "port" bits for SMC call argument can be constructed directly -from PHY type and lane number. - -Change driver code to always pass zero port number for non-ethernet PHYs -and for ethernet PHYs determinate port number from lane number. This -simplifies the driver. - -As port number from DT PHY configuration is not used anymore, remove whole -driver code which parses it. This also simplifies the driver. - -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún -Reviewed-by: Miquel Raynal ---- - drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 62 +++++++++----------- - 1 file changed, 29 insertions(+), 33 deletions(-) - ---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -@@ -20,7 +20,6 @@ - #include - - #define MVEBU_A3700_COMPHY_LANES 3 --#define MVEBU_A3700_COMPHY_PORTS 2 - - /* COMPHY Fast SMC function identifiers */ - #define COMPHY_SIP_POWER_ON 0x82000001 -@@ -45,51 +44,47 @@ - #define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ - ((idx) << 8) | \ - ((speed) << 2)) --#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \ -+#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ - ((width) << 18)) - - struct mvebu_a3700_comphy_conf { - unsigned int lane; - enum phy_mode mode; - int submode; -- unsigned int port; - u32 fw_mode; - }; - --#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \ -+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ - { \ - .lane = _lane, \ - .mode = _mode, \ - .submode = _smode, \ -- .port = _port, \ - .fw_mode = _fw, \ - } - --#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \ -- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw) -+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ -+ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) - --#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \ -- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw) -+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ -+ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) - - static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { - /* lane 0 */ -- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0, -+ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, - COMPHY_FW_MODE_USB3H), -- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, -+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, - COMPHY_FW_MODE_SGMII), -- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, -+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, - COMPHY_FW_MODE_2500BASEX), - /* lane 1 */ -- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, -- COMPHY_FW_MODE_PCIE), -- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, -+ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), -+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, - COMPHY_FW_MODE_SGMII), -- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, -+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, - COMPHY_FW_MODE_2500BASEX), - /* lane 2 */ -- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, -- COMPHY_FW_MODE_SATA), -- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0, -+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), -+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, - COMPHY_FW_MODE_USB3H), - }; - -@@ -98,7 +93,6 @@ struct mvebu_a3700_comphy_lane { - unsigned int id; - enum phy_mode mode; - int submode; -- int port; - }; - - static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, -@@ -120,7 +114,7 @@ static int mvebu_a3700_comphy_smc(unsign - } - } - --static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, -+static int mvebu_a3700_comphy_get_fw_mode(int lane, - enum phy_mode mode, - int submode) - { -@@ -132,7 +126,6 @@ static int mvebu_a3700_comphy_get_fw_mod - - for (i = 0; i < n; i++) { - if (mvebu_a3700_comphy_modes[i].lane == lane && -- mvebu_a3700_comphy_modes[i].port == port && - mvebu_a3700_comphy_modes[i].mode == mode && - mvebu_a3700_comphy_modes[i].submode == submode) - break; -@@ -153,7 +146,7 @@ static int mvebu_a3700_comphy_set_mode(s - if (submode == PHY_INTERFACE_MODE_1000BASEX) - submode = PHY_INTERFACE_MODE_SGMII; - -- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode, -+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, - submode); - if (fw_mode < 0) { - dev_err(lane->dev, "invalid COMPHY mode\n"); -@@ -172,9 +165,10 @@ static int mvebu_a3700_comphy_power_on(s - struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); - u32 fw_param; - int fw_mode; -+ int fw_port; - int ret; - -- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, -+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, - lane->mode, lane->submode); - if (fw_mode < 0) { - dev_err(lane->dev, "invalid COMPHY mode\n"); -@@ -191,17 +185,18 @@ static int mvebu_a3700_comphy_power_on(s - fw_param = COMPHY_FW_MODE(fw_mode); - break; - case PHY_MODE_ETHERNET: -+ fw_port = (lane->id == 0) ? 1 : 0; - switch (lane->submode) { - case PHY_INTERFACE_MODE_SGMII: - dev_dbg(lane->dev, "set lane %d to SGMII mode\n", - lane->id); -- fw_param = COMPHY_FW_NET(fw_mode, lane->port, -+ fw_param = COMPHY_FW_NET(fw_mode, fw_port, - COMPHY_FW_SPEED_1_25G); - break; - case PHY_INTERFACE_MODE_2500BASEX: - dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", - lane->id); -- fw_param = COMPHY_FW_NET(fw_mode, lane->port, -+ fw_param = COMPHY_FW_NET(fw_mode, fw_port, - COMPHY_FW_SPEED_3_125G); - break; - default: -@@ -212,8 +207,7 @@ static int mvebu_a3700_comphy_power_on(s - break; - case PHY_MODE_PCIE: - dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); -- fw_param = COMPHY_FW_PCIE(fw_mode, lane->port, -- COMPHY_FW_SPEED_5G, -+ fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, - phy->attrs.bus_width); - break; - default: -@@ -247,17 +241,20 @@ static struct phy *mvebu_a3700_comphy_xl - struct of_phandle_args *args) - { - struct mvebu_a3700_comphy_lane *lane; -+ unsigned int port; - struct phy *phy; - -- if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS)) -- return ERR_PTR(-EINVAL); -- - phy = of_phy_simple_xlate(dev, args); - if (IS_ERR(phy)) - return phy; - - lane = phy_get_drvdata(phy); -- lane->port = args->args[0]; -+ -+ port = args->args[0]; -+ if (port != 0 && (port != 1 || lane->id != 0)) { -+ dev_err(lane->dev, "invalid port number %u\n", port); -+ return ERR_PTR(-EINVAL); -+ } - - return phy; - } -@@ -302,7 +299,6 @@ static int mvebu_a3700_comphy_probe(stru - lane->mode = PHY_MODE_INVALID; - lane->submode = PHY_INTERFACE_MODE_NA; - lane->id = lane_id; -- lane->port = -1; - phy_set_drvdata(phy, lane); - } - diff --git a/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch b/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch deleted file mode 100644 index 73ead1e16c..0000000000 --- a/target/linux/generic/pending-5.15/851-0002-phy-marvell-phy-mvebu-a3700-comphy-Add-native-kernel.patch +++ /dev/null @@ -1,1564 +0,0 @@ -From 9d276da259cce20b2ed7a868b6e6a6a205f7bb04 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 23 Sep 2021 19:20:13 +0200 -Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel - implementation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Remove old RPC implementation and add a new native kernel implementation. - -The old implementation uses ARM SMC API to issue RPC calls to ARM Trusted -Firmware which provides real implementation of PHY configuration. - -But older versions of ARM Trusted Firmware do not provide this PHY -configuration functionality, simply returning: operation not supported; or -worse, some versions provide the configuration functionality incorrectly. - -For example the firmware shipped in ESPRESSObin board has this older -version of ARM Trusted Firmware and therefore SATA, USB 3.0 and PCIe -functionality do not work with newer versions of Linux kernel. - -Due to the above reasons, the following commits were introduced into Linux, -to workaround these issues by ignoring -EOPNOTSUPP error code from -phy-mvebu-a3700-comphy driver function phy_power_on(): - -commit 45aefe3d2251 ("ata: ahci: mvebu: Make SATA PHY optional for Armada -3720") -commit 3241929b67d2 ("usb: host: xhci: mvebu: make USB 3.0 PHY optional for -Armada 3720") -commit b0c6ae0f8948 ("PCI: aardvark: Fix initialization with old Marvell's -Arm Trusted Firmware") - -Replace this RPC implementation with proper native kernel implementation, -which is independent on the firmware. Never return -EOPNOTSUPP for proper -arguments. - -This should solve multiple issues with real-world boards, where it is not -possible or really inconvenient to change the firmware. Let's eliminate -these issues. - -This implementation is ported directly from Armada 3720 comphy driver found -in newest version of ARM Trusted Firmware source code, but with various -fixes of register names, some added comments, some refactoring due to the -original code not conforming to kernel standards. Also PCIe mode poweroff -support was added here, and PHY reset support. These changes are also going -to be sent to ARM Trusted Firmware. - -Signed-off-by: Pali Rohár -Acked-by: Miquel Raynal -[ Pali did the porting from ATF. - I (Marek) then fixed some register names, some various other things, - added some comments and refactored the code to kernel standards. Also - fixed PHY poweroff and added PHY reset. ] -Signed-off-by: Marek Behún ---- - drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1351 ++++++++++++++++-- - 1 file changed, 1234 insertions(+), 117 deletions(-) - ---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -@@ -5,12 +5,16 @@ - * Authors: - * Evan Wang - * Miquèl Raynal -+ * Pali Rohár -+ * Marek Behún - * - * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart. -- * SMC call initial support done by Grzegorz Jaszczyk. -+ * Comphy code from ARM Trusted Firmware ported by Pali Rohár -+ * and Marek Behún . - */ - --#include -+#include -+#include - #include - #include - #include -@@ -18,103 +22,1147 @@ - #include - #include - #include -+#include - --#define MVEBU_A3700_COMPHY_LANES 3 -+#define PLL_SET_DELAY_US 600 -+#define COMPHY_PLL_SLEEP 1000 -+#define COMPHY_PLL_TIMEOUT 150000 -+ -+/* Comphy lane2 indirect access register offset */ -+#define COMPHY_LANE2_INDIR_ADDR 0x0 -+#define COMPHY_LANE2_INDIR_DATA 0x4 -+ -+/* SATA and USB3 PHY offset compared to SATA PHY */ -+#define COMPHY_LANE2_REGS_BASE 0x200 -+ -+/* -+ * When accessing common PHY lane registers directly, we need to shift by 1, -+ * since the registers are 16-bit. -+ */ -+#define COMPHY_LANE_REG_DIRECT(reg) (((reg) & 0x7FF) << 1) -+ -+/* COMPHY registers */ -+#define COMPHY_POWER_PLL_CTRL 0x01 -+#define PU_IVREF_BIT BIT(15) -+#define PU_PLL_BIT BIT(14) -+#define PU_RX_BIT BIT(13) -+#define PU_TX_BIT BIT(12) -+#define PU_TX_INTP_BIT BIT(11) -+#define PU_DFE_BIT BIT(10) -+#define RESET_DTL_RX_BIT BIT(9) -+#define PLL_LOCK_BIT BIT(8) -+#define REF_FREF_SEL_MASK GENMASK(4, 0) -+#define REF_FREF_SEL_SERDES_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x1) -+#define REF_FREF_SEL_SERDES_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) -+#define REF_FREF_SEL_SERDES_50MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x4) -+#define REF_FREF_SEL_PCIE_USB3_25MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x2) -+#define REF_FREF_SEL_PCIE_USB3_40MHZ FIELD_PREP(REF_FREF_SEL_MASK, 0x3) -+#define COMPHY_MODE_MASK GENMASK(7, 5) -+#define COMPHY_MODE_SATA FIELD_PREP(COMPHY_MODE_MASK, 0x0) -+#define COMPHY_MODE_PCIE FIELD_PREP(COMPHY_MODE_MASK, 0x3) -+#define COMPHY_MODE_SERDES FIELD_PREP(COMPHY_MODE_MASK, 0x4) -+#define COMPHY_MODE_USB3 FIELD_PREP(COMPHY_MODE_MASK, 0x5) -+ -+#define COMPHY_KVCO_CAL_CTRL 0x02 -+#define USE_MAX_PLL_RATE_BIT BIT(12) -+#define SPEED_PLL_MASK GENMASK(7, 2) -+#define SPEED_PLL_VALUE_16 FIELD_PREP(SPEED_PLL_MASK, 0x10) -+ -+#define COMPHY_DIG_LOOPBACK_EN 0x23 -+#define SEL_DATA_WIDTH_MASK GENMASK(11, 10) -+#define DATA_WIDTH_10BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x0) -+#define DATA_WIDTH_20BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x1) -+#define DATA_WIDTH_40BIT FIELD_PREP(SEL_DATA_WIDTH_MASK, 0x2) -+#define PLL_READY_TX_BIT BIT(4) -+ -+#define COMPHY_SYNC_PATTERN 0x24 -+#define TXD_INVERT_BIT BIT(10) -+#define RXD_INVERT_BIT BIT(11) -+ -+#define COMPHY_SYNC_MASK_GEN 0x25 -+#define PHY_GEN_MAX_MASK GENMASK(11, 10) -+#define PHY_GEN_MAX_USB3_5G FIELD_PREP(PHY_GEN_MAX_MASK, 0x1) -+ -+#define COMPHY_ISOLATION_CTRL 0x26 -+#define PHY_ISOLATE_MODE BIT(15) -+ -+#define COMPHY_GEN2_SET2 0x3e -+#define GS2_TX_SSC_AMP_MASK GENMASK(15, 9) -+#define GS2_TX_SSC_AMP_4128 FIELD_PREP(GS2_TX_SSC_AMP_MASK, 0x20) -+#define GS2_VREG_RXTX_MAS_ISET_MASK GENMASK(8, 7) -+#define GS2_VREG_RXTX_MAS_ISET_60U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ -+ 0x0) -+#define GS2_VREG_RXTX_MAS_ISET_80U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ -+ 0x1) -+#define GS2_VREG_RXTX_MAS_ISET_100U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ -+ 0x2) -+#define GS2_VREG_RXTX_MAS_ISET_120U FIELD_PREP(GS2_VREG_RXTX_MAS_ISET_MASK,\ -+ 0x3) -+#define GS2_RSVD_6_0_MASK GENMASK(6, 0) -+ -+#define COMPHY_GEN3_SET2 0x3f -+ -+#define COMPHY_IDLE_SYNC_EN 0x48 -+#define IDLE_SYNC_EN BIT(12) -+ -+#define COMPHY_MISC_CTRL0 0x4F -+#define CLK100M_125M_EN BIT(4) -+#define TXDCLK_2X_SEL BIT(6) -+#define CLK500M_EN BIT(7) -+#define PHY_REF_CLK_SEL BIT(10) -+ -+#define COMPHY_SFT_RESET 0x52 -+#define SFT_RST BIT(9) -+#define SFT_RST_NO_REG BIT(10) -+ -+#define COMPHY_MISC_CTRL1 0x73 -+#define SEL_BITS_PCIE_FORCE BIT(15) -+ -+#define COMPHY_GEN2_SET3 0x112 -+#define GS3_FFE_CAP_SEL_MASK GENMASK(3, 0) -+#define GS3_FFE_CAP_SEL_VALUE FIELD_PREP(GS3_FFE_CAP_SEL_MASK, 0xF) -+ -+/* PIPE registers */ -+#define COMPHY_PIPE_LANE_CFG0 0x180 -+#define PRD_TXDEEMPH0_MASK BIT(0) -+#define PRD_TXMARGIN_MASK GENMASK(3, 1) -+#define PRD_TXSWING_MASK BIT(4) -+#define CFG_TX_ALIGN_POS_MASK GENMASK(8, 5) -+ -+#define COMPHY_PIPE_LANE_CFG1 0x181 -+#define PRD_TXDEEMPH1_MASK BIT(15) -+#define USE_MAX_PLL_RATE_EN BIT(9) -+#define TX_DET_RX_MODE BIT(6) -+#define GEN2_TX_DATA_DLY_MASK GENMASK(4, 3) -+#define GEN2_TX_DATA_DLY_DEFT FIELD_PREP(GEN2_TX_DATA_DLY_MASK, 2) -+#define TX_ELEC_IDLE_MODE_EN BIT(0) -+ -+#define COMPHY_PIPE_LANE_STAT1 0x183 -+#define TXDCLK_PCLK_EN BIT(0) -+ -+#define COMPHY_PIPE_LANE_CFG4 0x188 -+#define SPREAD_SPECTRUM_CLK_EN BIT(7) -+ -+#define COMPHY_PIPE_RST_CLK_CTRL 0x1C1 -+#define PIPE_SOFT_RESET BIT(0) -+#define PIPE_REG_RESET BIT(1) -+#define MODE_CORE_CLK_FREQ_SEL BIT(9) -+#define MODE_PIPE_WIDTH_32 BIT(3) -+#define MODE_REFDIV_MASK GENMASK(5, 4) -+#define MODE_REFDIV_BY_4 FIELD_PREP(MODE_REFDIV_MASK, 0x2) -+ -+#define COMPHY_PIPE_TEST_MODE_CTRL 0x1C2 -+#define MODE_MARGIN_OVERRIDE BIT(2) -+ -+#define COMPHY_PIPE_CLK_SRC_LO 0x1C3 -+#define MODE_CLK_SRC BIT(0) -+#define BUNDLE_PERIOD_SEL BIT(1) -+#define BUNDLE_PERIOD_SCALE_MASK GENMASK(3, 2) -+#define BUNDLE_SAMPLE_CTRL BIT(4) -+#define PLL_READY_DLY_MASK GENMASK(7, 5) -+#define CFG_SEL_20B BIT(15) -+ -+#define COMPHY_PIPE_PWR_MGM_TIM1 0x1D0 -+#define CFG_PM_OSCCLK_WAIT_MASK GENMASK(15, 12) -+#define CFG_PM_RXDEN_WAIT_MASK GENMASK(11, 8) -+#define CFG_PM_RXDEN_WAIT_1_UNIT FIELD_PREP(CFG_PM_RXDEN_WAIT_MASK, 0x1) -+#define CFG_PM_RXDLOZ_WAIT_MASK GENMASK(7, 0) -+#define CFG_PM_RXDLOZ_WAIT_7_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0x7) -+#define CFG_PM_RXDLOZ_WAIT_12_UNIT FIELD_PREP(CFG_PM_RXDLOZ_WAIT_MASK, 0xC) -+ -+/* -+ * This register is not from PHY lane register space. It only exists in the -+ * indirect register space, before the actual PHY lane 2 registers. So the -+ * offset is absolute, not relative to COMPHY_LANE2_REGS_BASE. -+ * It is used only for SATA PHY initialization. -+ */ -+#define COMPHY_RESERVED_REG 0x0E -+#define PHYCTRL_FRM_PIN_BIT BIT(13) - --/* COMPHY Fast SMC function identifiers */ --#define COMPHY_SIP_POWER_ON 0x82000001 --#define COMPHY_SIP_POWER_OFF 0x82000002 --#define COMPHY_SIP_PLL_LOCK 0x82000003 -- --#define COMPHY_FW_MODE_SATA 0x1 --#define COMPHY_FW_MODE_SGMII 0x2 --#define COMPHY_FW_MODE_2500BASEX 0x3 --#define COMPHY_FW_MODE_USB3H 0x4 --#define COMPHY_FW_MODE_USB3D 0x5 --#define COMPHY_FW_MODE_PCIE 0x6 --#define COMPHY_FW_MODE_USB3 0xa -- --#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ --#define COMPHY_FW_SPEED_2_5G 1 --#define COMPHY_FW_SPEED_3_125G 2 /* 2500BASE-X */ --#define COMPHY_FW_SPEED_5G 3 --#define COMPHY_FW_SPEED_MAX 0x3F -- --#define COMPHY_FW_MODE(mode) ((mode) << 12) --#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ -- ((idx) << 8) | \ -- ((speed) << 2)) --#define COMPHY_FW_PCIE(mode, speed, width) (COMPHY_FW_NET(mode, 0, speed) | \ -- ((width) << 18)) -+/* South Bridge PHY Configuration Registers */ -+#define COMPHY_PHY_REG(lane, reg) (((1 - (lane)) * 0x28) + ((reg) & 0x3f)) -+ -+/* -+ * lane0: USB3/GbE1 PHY Configuration 1 -+ * lane1: PCIe/GbE0 PHY Configuration 1 -+ * (used only by SGMII code) -+ */ -+#define COMPHY_PHY_CFG1 0x0 -+#define PIN_PU_IVREF_BIT BIT(1) -+#define PIN_RESET_CORE_BIT BIT(11) -+#define PIN_RESET_COMPHY_BIT BIT(12) -+#define PIN_PU_PLL_BIT BIT(16) -+#define PIN_PU_RX_BIT BIT(17) -+#define PIN_PU_TX_BIT BIT(18) -+#define PIN_TX_IDLE_BIT BIT(19) -+#define GEN_RX_SEL_MASK GENMASK(25, 22) -+#define GEN_RX_SEL_VALUE(val) FIELD_PREP(GEN_RX_SEL_MASK, (val)) -+#define GEN_TX_SEL_MASK GENMASK(29, 26) -+#define GEN_TX_SEL_VALUE(val) FIELD_PREP(GEN_TX_SEL_MASK, (val)) -+#define SERDES_SPEED_1_25_G 0x6 -+#define SERDES_SPEED_3_125_G 0x8 -+#define PHY_RX_INIT_BIT BIT(30) -+ -+/* -+ * lane0: USB3/GbE1 PHY Status 1 -+ * lane1: PCIe/GbE0 PHY Status 1 -+ * (used only by SGMII code) -+ */ -+#define COMPHY_PHY_STAT1 0x18 -+#define PHY_RX_INIT_DONE_BIT BIT(0) -+#define PHY_PLL_READY_RX_BIT BIT(2) -+#define PHY_PLL_READY_TX_BIT BIT(3) -+ -+/* PHY Selector */ -+#define COMPHY_SELECTOR_PHY_REG 0xFC -+/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIe */ -+#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) -+/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */ -+#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) -+/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */ -+#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) - - struct mvebu_a3700_comphy_conf { - unsigned int lane; - enum phy_mode mode; - int submode; -- u32 fw_mode; - }; - --#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _fw) \ -+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode) \ - { \ - .lane = _lane, \ - .mode = _mode, \ - .submode = _smode, \ -- .fw_mode = _fw, \ - } - --#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _fw) \ -- MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _fw) -+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode) \ -+ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA) - --#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _fw) \ -- MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _fw) -+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode) \ -+ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode) - - static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { - /* lane 0 */ -- MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, -- COMPHY_FW_MODE_USB3H), -- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, -- COMPHY_FW_MODE_SGMII), -- MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, -- COMPHY_FW_MODE_2500BASEX), -+ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS), -+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII), -+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_1000BASEX), -+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX), - /* lane 1 */ -- MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), -- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, -- COMPHY_FW_MODE_SGMII), -- MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, -- COMPHY_FW_MODE_2500BASEX), -+ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE), -+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII), -+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_1000BASEX), -+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX), - /* lane 2 */ -- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), -- MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, -- COMPHY_FW_MODE_USB3H), -+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA), -+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS), -+}; -+ -+struct mvebu_a3700_comphy_priv { -+ void __iomem *comphy_regs; -+ void __iomem *lane0_phy_regs; /* USB3 and GbE1 */ -+ void __iomem *lane1_phy_regs; /* PCIe and GbE0 */ -+ void __iomem *lane2_phy_indirect; /* SATA and USB3 */ -+ spinlock_t lock; /* for PHY selector access */ -+ bool xtal_is_40m; - }; - - struct mvebu_a3700_comphy_lane { -+ struct mvebu_a3700_comphy_priv *priv; - struct device *dev; - unsigned int id; - enum phy_mode mode; - int submode; -+ bool invert_tx; -+ bool invert_rx; -+ bool needs_reset; -+}; -+ -+struct gbe_phy_init_data_fix { -+ u16 addr; -+ u16 value; -+}; -+ -+/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */ -+static struct gbe_phy_init_data_fix gbe_phy_init_fix[] = { -+ { 0x005, 0x07CC }, { 0x015, 0x0000 }, { 0x01B, 0x0000 }, -+ { 0x01D, 0x0000 }, { 0x01E, 0x0000 }, { 0x01F, 0x0000 }, -+ { 0x020, 0x0000 }, { 0x021, 0x0030 }, { 0x026, 0x0888 }, -+ { 0x04D, 0x0152 }, { 0x04F, 0xA020 }, { 0x050, 0x07CC }, -+ { 0x053, 0xE9CA }, { 0x055, 0xBD97 }, { 0x071, 0x3015 }, -+ { 0x076, 0x03AA }, { 0x07C, 0x0FDF }, { 0x0C2, 0x3030 }, -+ { 0x0C3, 0x8000 }, { 0x0E2, 0x5550 }, { 0x0E3, 0x12A4 }, -+ { 0x0E4, 0x7D00 }, { 0x0E6, 0x0C83 }, { 0x101, 0xFCC0 }, -+ { 0x104, 0x0C10 } - }; - --static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, -- unsigned long mode) -+/* 40M1G25 mode init data */ -+static u16 gbe_phy_init[512] = { -+ /* 0 1 2 3 4 5 6 7 */ -+ /*-----------------------------------------------------------*/ -+ /* 8 9 A B C D E F */ -+ 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */ -+ 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */ -+ 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */ -+ 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */ -+ 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */ -+ 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */ -+ 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ -+ 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */ -+ 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */ -+ 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */ -+ 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */ -+ 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */ -+ 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */ -+ 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */ -+ 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */ -+ 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */ -+ 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */ -+ 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */ -+ 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */ -+ 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */ -+ 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */ -+ 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */ -+ 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */ -+ 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */ -+ 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */ -+ 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */ -+ 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */ -+ 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */ -+ 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */ -+ 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */ -+ 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */ -+ 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */ -+ 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */ -+ 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */ -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ -+}; -+ -+static inline void comphy_reg_set(void __iomem *addr, u32 data, u32 mask) - { -- struct arm_smccc_res res; -- s32 ret; -+ u32 val; - -- arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); -- ret = res.a0; -+ val = readl(addr); -+ val = (val & ~mask) | (data & mask); -+ writel(val, addr); -+} - -- switch (ret) { -- case SMCCC_RET_SUCCESS: -- return 0; -- case SMCCC_RET_NOT_SUPPORTED: -- return -EOPNOTSUPP; -+static inline void comphy_reg_set16(void __iomem *addr, u16 data, u16 mask) -+{ -+ u16 val; -+ -+ val = readw(addr); -+ val = (val & ~mask) | (data & mask); -+ writew(val, addr); -+} -+ -+/* Used for accessing lane 2 registers (SATA/USB3 PHY) */ -+static void comphy_set_indirect(struct mvebu_a3700_comphy_priv *priv, -+ u32 offset, u16 data, u16 mask) -+{ -+ writel(offset, -+ priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_ADDR); -+ comphy_reg_set(priv->lane2_phy_indirect + COMPHY_LANE2_INDIR_DATA, -+ data, mask); -+} -+ -+static void comphy_lane_reg_set(struct mvebu_a3700_comphy_lane *lane, -+ u16 reg, u16 data, u16 mask) -+{ -+ if (lane->id == 2) { -+ /* lane 2 PHY registers are accessed indirectly */ -+ comphy_set_indirect(lane->priv, -+ reg + COMPHY_LANE2_REGS_BASE, -+ data, mask); -+ } else { -+ void __iomem *base = lane->id == 1 ? -+ lane->priv->lane1_phy_regs : -+ lane->priv->lane0_phy_regs; -+ -+ comphy_reg_set16(base + COMPHY_LANE_REG_DIRECT(reg), -+ data, mask); -+ } -+} -+ -+static int comphy_lane_reg_poll(struct mvebu_a3700_comphy_lane *lane, -+ u16 reg, u16 bits, -+ ulong sleep_us, ulong timeout_us) -+{ -+ int ret; -+ -+ if (lane->id == 2) { -+ u32 data; -+ -+ /* lane 2 PHY registers are accessed indirectly */ -+ writel(reg + COMPHY_LANE2_REGS_BASE, -+ lane->priv->lane2_phy_indirect + -+ COMPHY_LANE2_INDIR_ADDR); -+ -+ ret = readl_poll_timeout(lane->priv->lane2_phy_indirect + -+ COMPHY_LANE2_INDIR_DATA, -+ data, (data & bits) == bits, -+ sleep_us, timeout_us); -+ } else { -+ void __iomem *base = lane->id == 1 ? -+ lane->priv->lane1_phy_regs : -+ lane->priv->lane0_phy_regs; -+ u16 data; -+ -+ ret = readw_poll_timeout(base + COMPHY_LANE_REG_DIRECT(reg), -+ data, (data & bits) == bits, -+ sleep_us, timeout_us); -+ } -+ -+ return ret; -+} -+ -+static void comphy_periph_reg_set(struct mvebu_a3700_comphy_lane *lane, -+ u8 reg, u32 data, u32 mask) -+{ -+ comphy_reg_set(lane->priv->comphy_regs + COMPHY_PHY_REG(lane->id, reg), -+ data, mask); -+} -+ -+static int comphy_periph_reg_poll(struct mvebu_a3700_comphy_lane *lane, -+ u8 reg, u32 bits, -+ ulong sleep_us, ulong timeout_us) -+{ -+ u32 data; -+ -+ return readl_poll_timeout(lane->priv->comphy_regs + -+ COMPHY_PHY_REG(lane->id, reg), -+ data, (data & bits) == bits, -+ sleep_us, timeout_us); -+} -+ -+/* PHY selector configures with corresponding modes */ -+static int -+mvebu_a3700_comphy_set_phy_selector(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 old, new, clr = 0, set = 0; -+ unsigned long flags; -+ -+ switch (lane->mode) { -+ case PHY_MODE_SATA: -+ /* SATA must be in Lane2 */ -+ if (lane->id == 2) -+ clr = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; -+ else -+ goto error; -+ break; -+ -+ case PHY_MODE_ETHERNET: -+ if (lane->id == 0) -+ clr = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; -+ else if (lane->id == 1) -+ clr = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; -+ else -+ goto error; -+ break; -+ -+ case PHY_MODE_USB_HOST_SS: -+ if (lane->id == 2) -+ set = COMPHY_SELECTOR_USB3_PHY_SEL_BIT; -+ else if (lane->id == 0) -+ set = COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; -+ else -+ goto error; -+ break; -+ -+ case PHY_MODE_PCIE: -+ /* PCIE must be in Lane1 */ -+ if (lane->id == 1) -+ set = COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT; -+ else -+ goto error; -+ break; -+ -+ default: -+ goto error; -+ } -+ -+ spin_lock_irqsave(&lane->priv->lock, flags); -+ -+ old = readl(lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); -+ new = (old & ~clr) | set; -+ writel(new, lane->priv->comphy_regs + COMPHY_SELECTOR_PHY_REG); -+ -+ spin_unlock_irqrestore(&lane->priv->lock, flags); -+ -+ dev_dbg(lane->dev, -+ "COMPHY[%d] mode[%d] changed PHY selector 0x%08x -> 0x%08x\n", -+ lane->id, lane->mode, old, new); -+ -+ return 0; -+error: -+ dev_err(lane->dev, "COMPHY[%d] mode[%d] is invalid\n", lane->id, -+ lane->mode); -+ return -EINVAL; -+} -+ -+static int -+mvebu_a3700_comphy_sata_power_on(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 mask, data, ref_clk; -+ int ret; -+ -+ /* Configure phy selector for SATA */ -+ ret = mvebu_a3700_comphy_set_phy_selector(lane); -+ if (ret) -+ return ret; -+ -+ /* Clear phy isolation mode to make it work in normal mode */ -+ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, -+ 0x0, PHY_ISOLATE_MODE); -+ -+ /* 0. Check the Polarity invert bits */ -+ data = 0x0; -+ if (lane->invert_tx) -+ data |= TXD_INVERT_BIT; -+ if (lane->invert_rx) -+ data |= RXD_INVERT_BIT; -+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; -+ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); -+ -+ /* 1. Select 40-bit data width */ -+ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, -+ DATA_WIDTH_40BIT, SEL_DATA_WIDTH_MASK); -+ -+ /* 2. Select reference clock(25M) and PHY mode (SATA) */ -+ if (lane->priv->xtal_is_40m) -+ ref_clk = REF_FREF_SEL_SERDES_40MHZ; -+ else -+ ref_clk = REF_FREF_SEL_SERDES_25MHZ; -+ -+ data = ref_clk | COMPHY_MODE_SATA; -+ mask = REF_FREF_SEL_MASK | COMPHY_MODE_MASK; -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); -+ -+ /* 3. Use maximum PLL rate (no power save) */ -+ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, -+ USE_MAX_PLL_RATE_BIT, USE_MAX_PLL_RATE_BIT); -+ -+ /* 4. Reset reserved bit */ -+ comphy_set_indirect(lane->priv, COMPHY_RESERVED_REG, -+ 0x0, PHYCTRL_FRM_PIN_BIT); -+ -+ /* 5. Set vendor-specific configuration (It is done in sata driver) */ -+ /* XXX: in U-Boot below sequence was executed in this place, in Linux -+ * not. Now it is done only in U-Boot before this comphy -+ * initialization - tests shows that it works ok, but in case of any -+ * future problem it is left for reference. -+ * reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff); -+ * reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6)); -+ */ -+ -+ /* Wait for > 55 us to allow PLL be enabled */ -+ udelay(PLL_SET_DELAY_US); -+ -+ /* Polling status */ -+ ret = comphy_lane_reg_poll(lane, COMPHY_DIG_LOOPBACK_EN, -+ PLL_READY_TX_BIT, COMPHY_PLL_SLEEP, -+ COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to lock SATA PLL\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void comphy_gbe_phy_init(struct mvebu_a3700_comphy_lane *lane, -+ bool is_1gbps) -+{ -+ int addr, fix_idx; -+ u16 val; -+ -+ fix_idx = 0; -+ for (addr = 0; addr < 512; addr++) { -+ /* -+ * All PHY register values are defined in full for 3.125Gbps -+ * SERDES speed. The values required for 1.25 Gbps are almost -+ * the same and only few registers should be "fixed" in -+ * comparison to 3.125 Gbps values. These register values are -+ * stored in "gbe_phy_init_fix" array. -+ */ -+ if (!is_1gbps && gbe_phy_init_fix[fix_idx].addr == addr) { -+ /* Use new value */ -+ val = gbe_phy_init_fix[fix_idx].value; -+ if (fix_idx < ARRAY_SIZE(gbe_phy_init_fix)) -+ fix_idx++; -+ } else { -+ val = gbe_phy_init[addr]; -+ } -+ -+ comphy_lane_reg_set(lane, addr, val, 0xFFFF); -+ } -+} -+ -+static int -+mvebu_a3700_comphy_ethernet_power_on(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 mask, data, speed_sel; -+ int ret; -+ -+ /* Set selector */ -+ ret = mvebu_a3700_comphy_set_phy_selector(lane); -+ if (ret) -+ return ret; -+ -+ /* -+ * 1. Reset PHY by setting PHY input port PIN_RESET=1. -+ * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep -+ * PHY TXP/TXN output to idle state during PHY initialization -+ * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0. -+ */ -+ data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT; -+ mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT | -+ PIN_PU_TX_BIT | PHY_RX_INIT_BIT; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+ -+ /* 4. Release reset to the PHY by setting PIN_RESET=0. */ -+ data = 0x0; -+ mask = PIN_RESET_COMPHY_BIT; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+ -+ /* -+ * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY -+ * bit rate -+ */ -+ switch (lane->submode) { -+ case PHY_INTERFACE_MODE_SGMII: -+ case PHY_INTERFACE_MODE_1000BASEX: -+ /* SGMII 1G, SerDes speed 1.25G */ -+ speed_sel = SERDES_SPEED_1_25_G; -+ break; -+ case PHY_INTERFACE_MODE_2500BASEX: -+ /* 2500Base-X, SerDes speed 3.125G */ -+ speed_sel = SERDES_SPEED_3_125_G; -+ break; - default: -+ /* Other rates are not supported */ -+ dev_err(lane->dev, -+ "unsupported phy speed %d on comphy lane%d\n", -+ lane->submode, lane->id); - return -EINVAL; - } -+ data = GEN_RX_SEL_VALUE(speed_sel) | GEN_TX_SEL_VALUE(speed_sel); -+ mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+ -+ /* -+ * 6. Wait 10mS for bandgap and reference clocks to stabilize; then -+ * start SW programming. -+ */ -+ mdelay(10); -+ -+ /* 7. Program COMPHY register PHY_MODE */ -+ data = COMPHY_MODE_SERDES; -+ mask = COMPHY_MODE_MASK; -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); -+ -+ /* -+ * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK -+ * source -+ */ -+ data = 0x0; -+ mask = PHY_REF_CLK_SEL; -+ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); -+ -+ /* -+ * 9. Set correct reference clock frequency in COMPHY register -+ * REF_FREF_SEL. -+ */ -+ if (lane->priv->xtal_is_40m) -+ data = REF_FREF_SEL_SERDES_50MHZ; -+ else -+ data = REF_FREF_SEL_SERDES_25MHZ; -+ -+ mask = REF_FREF_SEL_MASK; -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); -+ -+ /* 10. Program COMPHY register PHY_GEN_MAX[1:0] -+ * This step is mentioned in the flow received from verification team. -+ * However the PHY_GEN_MAX value is only meaningful for other interfaces -+ * (not SERDES). For instance, it selects SATA speed 1.5/3/6 Gbps or -+ * PCIe speed 2.5/5 Gbps -+ */ -+ -+ /* -+ * 11. Program COMPHY register SEL_BITS to set correct parallel data -+ * bus width -+ */ -+ data = DATA_WIDTH_10BIT; -+ mask = SEL_DATA_WIDTH_MASK; -+ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, data, mask); -+ -+ /* -+ * 12. As long as DFE function needs to be enabled in any mode, -+ * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F -+ * for real chip during COMPHY power on. -+ * The step 14 exists (and empty) in the original initialization flow -+ * obtained from the verification team. According to the functional -+ * specification DFE_UPDATE_EN already has the default value 0x3F -+ */ -+ -+ /* -+ * 13. Program COMPHY GEN registers. -+ * These registers should be programmed based on the lab testing result -+ * to achieve optimal performance. Please contact the CEA group to get -+ * the related GEN table during real chip bring-up. We only required to -+ * run though the entire registers programming flow defined by -+ * "comphy_gbe_phy_init" when the REF clock is 40 MHz. For REF clock -+ * 25 MHz the default values stored in PHY registers are OK. -+ */ -+ dev_dbg(lane->dev, "Running C-DPI phy init %s mode\n", -+ lane->submode == PHY_INTERFACE_MODE_2500BASEX ? "2G5" : "1G"); -+ if (lane->priv->xtal_is_40m) -+ comphy_gbe_phy_init(lane, -+ lane->submode != PHY_INTERFACE_MODE_2500BASEX); -+ -+ /* -+ * 14. [Simulation Only] should not be used for real chip. -+ * By pass power up calibration by programming EXT_FORCE_CAL_DONE -+ * (R02h[9]) to 1 to shorten COMPHY simulation time. -+ */ -+ -+ /* -+ * 15. [Simulation Only: should not be used for real chip] -+ * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training -+ * simulation time. -+ */ -+ -+ /* -+ * 16. Check the PHY Polarity invert bit -+ */ -+ data = 0x0; -+ if (lane->invert_tx) -+ data |= TXD_INVERT_BIT; -+ if (lane->invert_rx) -+ data |= RXD_INVERT_BIT; -+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; -+ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); -+ -+ /* -+ * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to -+ * start PHY power up sequence. All the PHY register programming should -+ * be done before PIN_PU_PLL=1. There should be no register programming -+ * for normal PHY operation from this point. -+ */ -+ data = PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; -+ mask = data; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+ -+ /* -+ * 18. Wait for PHY power up sequence to finish by checking output ports -+ * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1. -+ */ -+ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, -+ PHY_PLL_READY_TX_BIT | -+ PHY_PLL_READY_RX_BIT, -+ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", -+ lane->id); -+ return ret; -+ } -+ -+ /* -+ * 19. Set COMPHY input port PIN_TX_IDLE=0 -+ */ -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, 0x0, PIN_TX_IDLE_BIT); -+ -+ /* -+ * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To -+ * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the -+ * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to -+ * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please -+ * refer to RX initialization part for details. -+ */ -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, -+ PHY_RX_INIT_BIT, PHY_RX_INIT_BIT); -+ -+ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, -+ PHY_PLL_READY_TX_BIT | -+ PHY_PLL_READY_RX_BIT, -+ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to lock PLL for SERDES PHY %d\n", -+ lane->id); -+ return ret; -+ } -+ -+ ret = comphy_periph_reg_poll(lane, COMPHY_PHY_STAT1, -+ PHY_RX_INIT_DONE_BIT, -+ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to init RX of SERDES PHY %d\n", -+ lane->id); -+ return ret; -+ } -+ -+ return 0; - } - --static int mvebu_a3700_comphy_get_fw_mode(int lane, -+static int -+mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 mask, data, cfg, ref_clk; -+ int ret; -+ -+ /* Set phy seclector */ -+ ret = mvebu_a3700_comphy_set_phy_selector(lane); -+ if (ret) -+ return ret; -+ -+ /* -+ * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The -+ * register belong to UTMI module, so it is set in UTMI phy driver. -+ */ -+ -+ /* -+ * 1. Set PRD_TXDEEMPH (3.5db de-emph) -+ */ -+ data = PRD_TXDEEMPH0_MASK; -+ mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK | -+ CFG_TX_ALIGN_POS_MASK; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG0, data, mask); -+ -+ /* -+ * 2. Set BIT0: enable transmitter in high impedance mode -+ * Set BIT[3:4]: delay 2 clock cycles for HiZ off latency -+ * Set BIT6: Tx detect Rx at HiZ mode -+ * Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db -+ * together with bit 0 of COMPHY_PIPE_LANE_CFG0 register -+ */ -+ data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN; -+ mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK | -+ TX_ELEC_IDLE_MODE_EN; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, data, mask); -+ -+ /* -+ * 3. Set Spread Spectrum Clock Enabled -+ */ -+ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG4, -+ SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN); -+ -+ /* -+ * 4. Set Override Margining Controls From the MAC: -+ * Use margining signals from lane configuration -+ */ -+ comphy_lane_reg_set(lane, COMPHY_PIPE_TEST_MODE_CTRL, -+ MODE_MARGIN_OVERRIDE, 0xFFFF); -+ -+ /* -+ * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles -+ * set Mode Clock Source = PCLK is generated from REFCLK -+ */ -+ data = 0x0; -+ mask = MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE_MASK | -+ BUNDLE_SAMPLE_CTRL | PLL_READY_DLY_MASK; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, data, mask); -+ -+ /* -+ * 6. Set G2 Spread Spectrum Clock Amplitude at 4K -+ */ -+ comphy_lane_reg_set(lane, COMPHY_GEN2_SET2, -+ GS2_TX_SSC_AMP_4128, GS2_TX_SSC_AMP_MASK); -+ -+ /* -+ * 7. Unset G3 Spread Spectrum Clock Amplitude -+ * set G3 TX and RX Register Master Current Select -+ */ -+ data = GS2_VREG_RXTX_MAS_ISET_60U; -+ mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK | -+ GS2_RSVD_6_0_MASK; -+ comphy_lane_reg_set(lane, COMPHY_GEN3_SET2, data, mask); -+ -+ /* -+ * 8. Check crystal jumper setting and program the Power and PLL Control -+ * accordingly Change RX wait -+ */ -+ if (lane->priv->xtal_is_40m) { -+ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; -+ cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT; -+ } else { -+ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; -+ cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT; -+ } -+ -+ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | -+ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_USB3 | ref_clk; -+ mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | -+ PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | COMPHY_MODE_MASK | -+ REF_FREF_SEL_MASK; -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); -+ -+ data = CFG_PM_RXDEN_WAIT_1_UNIT | cfg; -+ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | -+ CFG_PM_RXDLOZ_WAIT_MASK; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); -+ -+ /* -+ * 9. Enable idle sync -+ */ -+ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, -+ IDLE_SYNC_EN, IDLE_SYNC_EN); -+ -+ /* -+ * 10. Enable the output of 500M clock -+ */ -+ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, CLK500M_EN, CLK500M_EN); -+ -+ /* -+ * 11. Set 20-bit data width -+ */ -+ comphy_lane_reg_set(lane, COMPHY_DIG_LOOPBACK_EN, -+ DATA_WIDTH_20BIT, 0xFFFF); -+ -+ /* -+ * 12. Override Speed_PLL value and use MAC PLL -+ */ -+ data = SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT; -+ mask = 0xFFFF; -+ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, data, mask); -+ -+ /* -+ * 13. Check the Polarity invert bit -+ */ -+ data = 0x0; -+ if (lane->invert_tx) -+ data |= TXD_INVERT_BIT; -+ if (lane->invert_rx) -+ data |= RXD_INVERT_BIT; -+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; -+ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); -+ -+ /* -+ * 14. Set max speed generation to USB3.0 5Gbps -+ */ -+ comphy_lane_reg_set(lane, COMPHY_SYNC_MASK_GEN, -+ PHY_GEN_MAX_USB3_5G, PHY_GEN_MAX_MASK); -+ -+ /* -+ * 15. Set capacitor value for FFE gain peaking to 0xF -+ */ -+ comphy_lane_reg_set(lane, COMPHY_GEN2_SET3, -+ GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK); -+ -+ /* -+ * 16. Release SW reset -+ */ -+ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4; -+ mask = 0xFFFF; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); -+ -+ /* Wait for > 55 us to allow PCLK be enabled */ -+ udelay(PLL_SET_DELAY_US); -+ -+ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, -+ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to lock USB3 PLL\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int -+mvebu_a3700_comphy_pcie_power_on(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 mask, data, ref_clk; -+ int ret; -+ -+ /* Configure phy selector for PCIe */ -+ ret = mvebu_a3700_comphy_set_phy_selector(lane); -+ if (ret) -+ return ret; -+ -+ /* 1. Enable max PLL. */ -+ comphy_lane_reg_set(lane, COMPHY_PIPE_LANE_CFG1, -+ USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN); -+ -+ /* 2. Select 20 bit SERDES interface. */ -+ comphy_lane_reg_set(lane, COMPHY_PIPE_CLK_SRC_LO, -+ CFG_SEL_20B, CFG_SEL_20B); -+ -+ /* 3. Force to use reg setting for PCIe mode */ -+ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL1, -+ SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE); -+ -+ /* 4. Change RX wait */ -+ data = CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT; -+ mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK | -+ CFG_PM_RXDLOZ_WAIT_MASK; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_PWR_MGM_TIM1, data, mask); -+ -+ /* 5. Enable idle sync */ -+ comphy_lane_reg_set(lane, COMPHY_IDLE_SYNC_EN, -+ IDLE_SYNC_EN, IDLE_SYNC_EN); -+ -+ /* 6. Enable the output of 100M/125M/500M clock */ -+ data = CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN; -+ mask = data; -+ comphy_lane_reg_set(lane, COMPHY_MISC_CTRL0, data, mask); -+ -+ /* -+ * 7. Enable TX, PCIE global register, 0xd0074814, it is done in -+ * PCI-E driver -+ */ -+ -+ /* -+ * 8. Check crystal jumper setting and program the Power and PLL -+ * Control accordingly -+ */ -+ -+ if (lane->priv->xtal_is_40m) -+ ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ; -+ else -+ ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ; -+ -+ data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT | -+ PU_TX_INTP_BIT | PU_DFE_BIT | COMPHY_MODE_PCIE | ref_clk; -+ mask = 0xFFFF; -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, data, mask); -+ -+ /* 9. Override Speed_PLL value and use MAC PLL */ -+ comphy_lane_reg_set(lane, COMPHY_KVCO_CAL_CTRL, -+ SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, -+ 0xFFFF); -+ -+ /* 10. Check the Polarity invert bit */ -+ data = 0x0; -+ if (lane->invert_tx) -+ data |= TXD_INVERT_BIT; -+ if (lane->invert_rx) -+ data |= RXD_INVERT_BIT; -+ mask = TXD_INVERT_BIT | RXD_INVERT_BIT; -+ comphy_lane_reg_set(lane, COMPHY_SYNC_PATTERN, data, mask); -+ -+ /* 11. Release SW reset */ -+ data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32; -+ mask = data | PIPE_SOFT_RESET | MODE_REFDIV_MASK; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); -+ -+ /* Wait for > 55 us to allow PCLK be enabled */ -+ udelay(PLL_SET_DELAY_US); -+ -+ ret = comphy_lane_reg_poll(lane, COMPHY_PIPE_LANE_STAT1, TXDCLK_PCLK_EN, -+ COMPHY_PLL_SLEEP, COMPHY_PLL_TIMEOUT); -+ if (ret) { -+ dev_err(lane->dev, "Failed to lock PCIE PLL\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void -+mvebu_a3700_comphy_usb3_power_off(struct mvebu_a3700_comphy_lane *lane) -+{ -+ /* -+ * Currently the USB3 MAC sets the USB3 PHY to low state, so we do not -+ * need to power off USB3 PHY again. -+ */ -+} -+ -+static void -+mvebu_a3700_comphy_sata_power_off(struct mvebu_a3700_comphy_lane *lane) -+{ -+ /* Set phy isolation mode */ -+ comphy_lane_reg_set(lane, COMPHY_ISOLATION_CTRL, -+ PHY_ISOLATE_MODE, PHY_ISOLATE_MODE); -+ -+ /* Power off PLL, Tx, Rx */ -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, -+ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); -+} -+ -+static void -+mvebu_a3700_comphy_ethernet_power_off(struct mvebu_a3700_comphy_lane *lane) -+{ -+ u32 mask, data; -+ -+ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | PIN_PU_IVREF_BIT | -+ PHY_RX_INIT_BIT; -+ mask = data; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+} -+ -+static void -+mvebu_a3700_comphy_pcie_power_off(struct mvebu_a3700_comphy_lane *lane) -+{ -+ /* Power off PLL, Tx, Rx */ -+ comphy_lane_reg_set(lane, COMPHY_POWER_PLL_CTRL, -+ 0x0, PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT); -+} -+ -+static int mvebu_a3700_comphy_reset(struct phy *phy) -+{ -+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); -+ u16 mask, data; -+ -+ dev_dbg(lane->dev, "resetting lane %d\n", lane->id); -+ -+ /* COMPHY reset for internal logic */ -+ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, -+ SFT_RST_NO_REG, SFT_RST_NO_REG); -+ -+ /* COMPHY register reset (cleared automatically) */ -+ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST); -+ -+ /* PIPE soft and register reset */ -+ data = PIPE_SOFT_RESET | PIPE_REG_RESET; -+ mask = data; -+ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, data, mask); -+ -+ /* Release PIPE register reset */ -+ comphy_lane_reg_set(lane, COMPHY_PIPE_RST_CLK_CTRL, -+ 0x0, PIPE_REG_RESET); -+ -+ /* Reset SB configuration register (only for lanes 0 and 1) */ -+ if (lane->id == 0 || lane->id == 1) { -+ u32 mask, data; -+ -+ data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT | -+ PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT; -+ mask = data | PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT; -+ comphy_periph_reg_set(lane, COMPHY_PHY_CFG1, data, mask); -+ } -+ -+ return 0; -+} -+ -+static bool mvebu_a3700_comphy_check_mode(int lane, - enum phy_mode mode, - int submode) - { -@@ -122,7 +1170,7 @@ static int mvebu_a3700_comphy_get_fw_mod - - /* Unused PHY mux value is 0x0 */ - if (mode == PHY_MODE_INVALID) -- return -EINVAL; -+ return false; - - for (i = 0; i < n; i++) { - if (mvebu_a3700_comphy_modes[i].lane == lane && -@@ -132,27 +1180,30 @@ static int mvebu_a3700_comphy_get_fw_mod - } - - if (i == n) -- return -EINVAL; -+ return false; - -- return mvebu_a3700_comphy_modes[i].fw_mode; -+ return true; - } - - static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, - int submode) - { - struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); -- int fw_mode; -- -- if (submode == PHY_INTERFACE_MODE_1000BASEX) -- submode = PHY_INTERFACE_MODE_SGMII; - -- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, mode, -- submode); -- if (fw_mode < 0) { -+ if (!mvebu_a3700_comphy_check_mode(lane->id, mode, submode)) { - dev_err(lane->dev, "invalid COMPHY mode\n"); -- return fw_mode; -+ return -EINVAL; - } - -+ /* Mode cannot be changed while the PHY is powered on */ -+ if (phy->power_count && -+ (lane->mode != mode || lane->submode != submode)) -+ return -EBUSY; -+ -+ /* If changing mode, ensure reset is called */ -+ if (lane->mode != PHY_MODE_INVALID && lane->mode != mode) -+ lane->needs_reset = true; -+ - /* Just remember the mode, ->power_on() will do the real setup */ - lane->mode = mode; - lane->submode = submode; -@@ -163,76 +1214,68 @@ static int mvebu_a3700_comphy_set_mode(s - static int mvebu_a3700_comphy_power_on(struct phy *phy) - { - struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); -- u32 fw_param; -- int fw_mode; -- int fw_port; - int ret; - -- fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, -- lane->mode, lane->submode); -- if (fw_mode < 0) { -+ if (!mvebu_a3700_comphy_check_mode(lane->id, lane->mode, -+ lane->submode)) { - dev_err(lane->dev, "invalid COMPHY mode\n"); -- return fw_mode; -+ return -EINVAL; -+ } -+ -+ if (lane->needs_reset) { -+ ret = mvebu_a3700_comphy_reset(phy); -+ if (ret) -+ return ret; -+ -+ lane->needs_reset = false; - } - - switch (lane->mode) { - case PHY_MODE_USB_HOST_SS: - dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); -- fw_param = COMPHY_FW_MODE(fw_mode); -- break; -+ return mvebu_a3700_comphy_usb3_power_on(lane); - case PHY_MODE_SATA: - dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id); -- fw_param = COMPHY_FW_MODE(fw_mode); -- break; -+ return mvebu_a3700_comphy_sata_power_on(lane); - case PHY_MODE_ETHERNET: -- fw_port = (lane->id == 0) ? 1 : 0; -- switch (lane->submode) { -- case PHY_INTERFACE_MODE_SGMII: -- dev_dbg(lane->dev, "set lane %d to SGMII mode\n", -- lane->id); -- fw_param = COMPHY_FW_NET(fw_mode, fw_port, -- COMPHY_FW_SPEED_1_25G); -- break; -- case PHY_INTERFACE_MODE_2500BASEX: -- dev_dbg(lane->dev, "set lane %d to 2500BASEX mode\n", -- lane->id); -- fw_param = COMPHY_FW_NET(fw_mode, fw_port, -- COMPHY_FW_SPEED_3_125G); -- break; -- default: -- dev_err(lane->dev, "unsupported PHY submode (%d)\n", -- lane->submode); -- return -ENOTSUPP; -- } -- break; -+ dev_dbg(lane->dev, "set lane %d to Ethernet mode\n", lane->id); -+ return mvebu_a3700_comphy_ethernet_power_on(lane); - case PHY_MODE_PCIE: - dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); -- fw_param = COMPHY_FW_PCIE(fw_mode, COMPHY_FW_SPEED_5G, -- phy->attrs.bus_width); -- break; -+ return mvebu_a3700_comphy_pcie_power_on(lane); - default: - dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode); -- return -ENOTSUPP; -+ return -EOPNOTSUPP; - } -- -- ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param); -- if (ret == -EOPNOTSUPP) -- dev_err(lane->dev, -- "unsupported SMC call, try updating your firmware\n"); -- -- return ret; - } - - static int mvebu_a3700_comphy_power_off(struct phy *phy) - { - struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); - -- return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0); -+ switch (lane->mode) { -+ case PHY_MODE_USB_HOST_SS: -+ mvebu_a3700_comphy_usb3_power_off(lane); -+ return 0; -+ case PHY_MODE_SATA: -+ mvebu_a3700_comphy_sata_power_off(lane); -+ return 0; -+ case PHY_MODE_ETHERNET: -+ mvebu_a3700_comphy_ethernet_power_off(lane); -+ return 0; -+ case PHY_MODE_PCIE: -+ mvebu_a3700_comphy_pcie_power_off(lane); -+ return 0; -+ default: -+ dev_err(lane->dev, "invalid COMPHY mode\n"); -+ return -EINVAL; -+ } - } - - static const struct phy_ops mvebu_a3700_comphy_ops = { - .power_on = mvebu_a3700_comphy_power_on, - .power_off = mvebu_a3700_comphy_power_off, -+ .reset = mvebu_a3700_comphy_reset, - .set_mode = mvebu_a3700_comphy_set_mode, - .owner = THIS_MODULE, - }; -@@ -256,13 +1299,75 @@ static struct phy *mvebu_a3700_comphy_xl - return ERR_PTR(-EINVAL); - } - -+ lane->invert_tx = args->args[1] & BIT(0); -+ lane->invert_rx = args->args[1] & BIT(1); -+ - return phy; - } - - static int mvebu_a3700_comphy_probe(struct platform_device *pdev) - { -+ struct mvebu_a3700_comphy_priv *priv; - struct phy_provider *provider; - struct device_node *child; -+ struct resource *res; -+ struct clk *clk; -+ int ret; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ spin_lock_init(&priv->lock); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "comphy"); -+ priv->comphy_regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->comphy_regs)) -+ return PTR_ERR(priv->comphy_regs); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "lane1_pcie_gbe"); -+ priv->lane1_phy_regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->lane1_phy_regs)) -+ return PTR_ERR(priv->lane1_phy_regs); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "lane0_usb3_gbe"); -+ priv->lane0_phy_regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->lane0_phy_regs)) -+ return PTR_ERR(priv->lane0_phy_regs); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "lane2_sata_usb3"); -+ priv->lane2_phy_indirect = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->lane2_phy_indirect)) -+ return PTR_ERR(priv->lane2_phy_indirect); -+ -+ /* -+ * Driver needs to know if reference xtal clock is 40MHz or 25MHz. -+ * Old DT bindings do not have xtal clk present. So do not fail here -+ * and expects that default 25MHz reference clock is used. -+ */ -+ clk = clk_get(&pdev->dev, "xtal"); -+ if (IS_ERR(clk)) { -+ if (PTR_ERR(clk) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ dev_warn(&pdev->dev, "missing 'xtal' clk (%ld)\n", -+ PTR_ERR(clk)); -+ } else { -+ ret = clk_prepare_enable(clk); -+ if (ret) { -+ dev_warn(&pdev->dev, "enabling xtal clk failed (%d)\n", -+ ret); -+ } else { -+ if (clk_get_rate(clk) == 40000000) -+ priv->xtal_is_40m = true; -+ clk_disable_unprepare(clk); -+ } -+ clk_put(clk); -+ } -+ -+ dev_set_drvdata(&pdev->dev, priv); - - for_each_available_child_of_node(pdev->dev.of_node, child) { - struct mvebu_a3700_comphy_lane *lane; -@@ -277,7 +1382,7 @@ static int mvebu_a3700_comphy_probe(stru - continue; - } - -- if (lane_id >= MVEBU_A3700_COMPHY_LANES) { -+ if (lane_id >= 3) { - dev_err(&pdev->dev, "invalid 'reg' property\n"); - continue; - } -@@ -295,11 +1400,21 @@ static int mvebu_a3700_comphy_probe(stru - return PTR_ERR(phy); - } - -+ lane->priv = priv; - lane->dev = &pdev->dev; - lane->mode = PHY_MODE_INVALID; - lane->submode = PHY_INTERFACE_MODE_NA; - lane->id = lane_id; -+ lane->invert_tx = false; -+ lane->invert_rx = false; - phy_set_drvdata(phy, lane); -+ -+ /* -+ * To avoid relying on the bootloader/firmware configuration, -+ * power off all comphys. -+ */ -+ mvebu_a3700_comphy_reset(phy); -+ lane->needs_reset = false; - } - - provider = devm_of_phy_provider_register(&pdev->dev, -@@ -323,5 +1438,7 @@ static struct platform_driver mvebu_a370 - module_platform_driver(mvebu_a3700_comphy_driver); - - MODULE_AUTHOR("Miquèl Raynal "); -+MODULE_AUTHOR("Pali Rohár "); -+MODULE_AUTHOR("Marek Behún "); - MODULE_DESCRIPTION("Common PHY driver for A3700"); - MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch b/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch deleted file mode 100644 index 33203a154d..0000000000 --- a/target/linux/generic/pending-5.15/851-0003-arm64-dts-marvell-armada-37xx-Add-xtal-clock-to-comp.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 66c51c39fd4bf05e99debf0e71de5704231c57dc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 23 Sep 2021 19:26:26 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Add xtal clock to comphy - node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the -reference xtal clock. So add missing xtal clock source into comphy device -tree node. If the property is not present, the driver defaults to 25 MHz -xtal rate (which, as far as we know, is used by all the existing boards). - -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -265,6 +265,8 @@ - "lane2_sata_usb3"; - #address-cells = <1>; - #size-cells = <0>; -+ clocks = <&xtalclk>; -+ clock-names = "xtal"; - - comphy0: phy@0 { - reg = <0>; diff --git a/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch b/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch deleted file mode 100644 index 3c994d2548..0000000000 --- a/target/linux/generic/pending-5.15/851-0004-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 750bb44dbbe9dfb4ba3e1f8a746b831b39ba3cd9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 23 Sep 2021 19:35:57 +0200 -Subject: [PATCH] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada - 3720" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9. - -Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return --EOPNOTSUPP from phy_power_on() callback anymore. - -So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data. - -AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so -remove this flag completely. - -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún -Acked-by: Miquel Raynal ---- - drivers/ata/ahci.h | 2 -- - drivers/ata/ahci_mvebu.c | 2 +- - drivers/ata/libahci_platform.c | 2 +- - 3 files changed, 2 insertions(+), 4 deletions(-) - ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -240,8 +240,6 @@ enum { - as default lpm_policy */ - AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during - suspend/resume */ -- AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP -- from phy_power_on() */ - AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ - - /* ap->flags bits */ ---- a/drivers/ata/ahci_mvebu.c -+++ b/drivers/ata/ahci_mvebu.c -@@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data - - static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { - .plat_config = ahci_mvebu_armada_3700_config, -- .flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON, -+ .flags = AHCI_HFLAG_SUSPEND_PHYS, - }; - - static const struct of_device_id ahci_mvebu_of_match[] = { ---- a/drivers/ata/libahci_platform.c -+++ b/drivers/ata/libahci_platform.c -@@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahc - } - - rc = phy_power_on(hpriv->phys[i]); -- if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) { -+ if (rc) { - phy_exit(hpriv->phys[i]); - goto disable_phys; - } diff --git a/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch b/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch deleted file mode 100644 index b8a3e880ce..0000000000 --- a/target/linux/generic/pending-5.15/851-0005-Revert-usb-host-xhci-mvebu-make-USB-3.0-PHY-optional.patch +++ /dev/null @@ -1,163 +0,0 @@ -From 9f0dfb279b1dd505d5e10b10e4a78a62030978d8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 23 Sep 2021 19:40:06 +0200 -Subject: [PATCH] Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for - Armada 3720" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. - -Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return --EOPNOTSUPP from phy_power_on() callback anymore. - -So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and -then also whole xhci_mvebu_a3700_plat_setup() function which is there just -to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. - -xhci plat_setup callback is not used by any other xhci plat driver, so -remove this callback completely. - -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún -Acked-by: Miquel Raynal ---- - drivers/usb/host/xhci-mvebu.c | 42 ----------------------------------- - drivers/usb/host/xhci-mvebu.h | 6 ----- - drivers/usb/host/xhci-plat.c | 20 +---------------- - drivers/usb/host/xhci-plat.h | 1 - - 4 files changed, 1 insertion(+), 68 deletions(-) - ---- a/drivers/usb/host/xhci-mvebu.c -+++ b/drivers/usb/host/xhci-mvebu.c -@@ -8,7 +8,6 @@ - #include - #include - #include --#include - - #include - #include -@@ -74,47 +73,6 @@ int xhci_mvebu_mbus_init_quirk(struct us - - return 0; - } -- --int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) --{ -- struct xhci_hcd *xhci = hcd_to_xhci(hcd); -- struct device *dev = hcd->self.controller; -- struct phy *phy; -- int ret; -- -- /* Old bindings miss the PHY handle */ -- phy = of_phy_get(dev->of_node, "usb3-phy"); -- if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) -- return -EPROBE_DEFER; -- else if (IS_ERR(phy)) -- goto phy_out; -- -- ret = phy_init(phy); -- if (ret) -- goto phy_put; -- -- ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); -- if (ret) -- goto phy_exit; -- -- ret = phy_power_on(phy); -- if (ret == -EOPNOTSUPP) { -- /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ -- dev_warn(dev, "PHY unsupported by firmware\n"); -- xhci->quirks |= XHCI_SKIP_PHY_INIT; -- } -- if (ret) -- goto phy_exit; -- -- phy_power_off(phy); --phy_exit: -- phy_exit(phy); --phy_put: -- of_phy_put(phy); --phy_out: -- -- return 0; --} - - int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) - { ---- a/drivers/usb/host/xhci-mvebu.h -+++ b/drivers/usb/host/xhci-mvebu.h -@@ -12,18 +12,12 @@ struct usb_hcd; - - #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) - int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); --int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); - int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); - #else - static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) - { - return 0; - } -- --static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) --{ -- return 0; --} - - static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) - { ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -44,16 +44,6 @@ static void xhci_priv_plat_start(struct - priv->plat_start(hcd); - } - --static int xhci_priv_plat_setup(struct usb_hcd *hcd) --{ -- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); -- -- if (!priv->plat_setup) -- return 0; -- -- return priv->plat_setup(hcd); --} -- - static int xhci_priv_init_quirk(struct usb_hcd *hcd) - { - struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); -@@ -121,7 +111,6 @@ static const struct xhci_plat_priv xhci_ - }; - - static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { -- .plat_setup = xhci_mvebu_a3700_plat_setup, - .init_quirk = xhci_mvebu_a3700_init_quirk, - }; - -@@ -341,14 +330,7 @@ static int xhci_plat_probe(struct platfo - - hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); - xhci->shared_hcd->tpl_support = hcd->tpl_support; -- -- if (priv) { -- ret = xhci_priv_plat_setup(hcd); -- if (ret) -- goto disable_usb_phy; -- } -- -- if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) -+ if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) - hcd->skip_phy_initialization = 1; - - if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) ---- a/drivers/usb/host/xhci-plat.h -+++ b/drivers/usb/host/xhci-plat.h -@@ -13,7 +13,6 @@ - struct xhci_plat_priv { - const char *firmware_name; - unsigned long long quirks; -- int (*plat_setup)(struct usb_hcd *); - void (*plat_start)(struct usb_hcd *); - int (*init_quirk)(struct usb_hcd *); - int (*suspend_quirk)(struct usb_hcd *); diff --git a/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch b/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch deleted file mode 100644 index 76b39452ad..0000000000 --- a/target/linux/generic/pending-5.15/851-0006-Revert-PCI-aardvark-Fix-initialization-with-old-Marv.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 9a352062b7e3857742389dff6f64393481dc755e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 23 Sep 2021 19:37:05 +0200 -Subject: [PATCH] Revert "PCI: aardvark: Fix initialization with old Marvell's - Arm Trusted Firmware" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6. - -Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return --EOPNOTSUPP from phy_power_on() callback anymore. - -So remove dead code which handles -EOPNOTSUPP return value. - -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún -Acked-by: Miquel Raynal ---- - drivers/pci/controller/pci-aardvark.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -1631,9 +1631,7 @@ static int advk_pcie_enable_phy(struct a - } - - ret = phy_power_on(pcie->phy); -- if (ret == -EOPNOTSUPP) { -- dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); -- } else if (ret) { -+ if (ret) { - phy_exit(pcie->phy); - return ret; - }