From: Masanari Iida Date: Fri, 6 Dec 2013 14:27:55 +0000 (+0900) Subject: staging: crystalhd: Fix typo in crystalhd X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cc922722d5faff6f83f857104eac99358feb50d4;p=openwrt%2Fstaging%2Fblogic.git staging: crystalhd: Fix typo in crystalhd Correct spelling typo. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/crystalhd/bc_dts_glob_lnx.h b/drivers/staging/crystalhd/bc_dts_glob_lnx.h index 981708f3ee39..92b0cff248cb 100644 --- a/drivers/staging/crystalhd/bc_dts_glob_lnx.h +++ b/drivers/staging/crystalhd/bc_dts_glob_lnx.h @@ -229,7 +229,7 @@ enum BC_DRV_CMD { DRV_CMD_REG_RD, /* Read Device Register */ DRV_CMD_REG_WR, /* Write Device Register */ DRV_CMD_FPGA_RD, /* Read FPGA Register */ - DRV_CMD_FPGA_WR, /* Wrtie FPGA Reister */ + DRV_CMD_FPGA_WR, /* Write FPGA Register */ DRV_CMD_MEM_RD, /* Read Device Memory */ DRV_CMD_MEM_WR, /* Write Device Memory */ DRV_CMD_RD_PCI_CFG, /* Read PCI Config Space */ diff --git a/drivers/staging/crystalhd/crystalhd_cmds.c b/drivers/staging/crystalhd/crystalhd_cmds.c index 3972b52e1416..642f438793c3 100644 --- a/drivers/staging/crystalhd/crystalhd_cmds.c +++ b/drivers/staging/crystalhd/crystalhd_cmds.c @@ -798,7 +798,7 @@ static const struct crystalhd_cmd_tbl g_crystalhd_cproc_tbl[] = { * * Current gstreamer frame work does not provide any power management * related notification to user mode decoder plug-in. As a work-around - * we pass on the power mangement notification to our plug-in by completing + * we pass on the power management notification to our plug-in by completing * all outstanding requests with BC_STS_IO_USER_ABORT return code. */ enum BC_STATUS crystalhd_suspend(struct crystalhd_cmd *ctx, diff --git a/drivers/staging/crystalhd/crystalhd_cmds.h b/drivers/staging/crystalhd/crystalhd_cmds.h index 377cd9d68b08..b5bf59dbcde9 100644 --- a/drivers/staging/crystalhd/crystalhd_cmds.h +++ b/drivers/staging/crystalhd/crystalhd_cmds.h @@ -29,7 +29,7 @@ /* * NOTE:: This is the main interface file between the Linux layer - * and the harware layer. This file will use the definitions + * and the hardware layer. This file will use the definitions * from _dts_glob and dts_defs etc.. which are defined for * windows. */ diff --git a/drivers/staging/crystalhd/crystalhd_fw_if.h b/drivers/staging/crystalhd/crystalhd_fw_if.h index 4b363a5069d7..05615e2a231a 100644 --- a/drivers/staging/crystalhd/crystalhd_fw_if.h +++ b/drivers/staging/crystalhd/crystalhd_fw_if.h @@ -115,7 +115,7 @@ struct fgt_sei { unsigned char model_id; /* Model id. */ /* +unused SE based on Thomson spec */ - unsigned char color_desc_flag; /* Separate color descrition flag. */ + unsigned char color_desc_flag; /* Separate color description flag. */ unsigned char bit_depth_luma; /* Bit depth luma minus 8. */ unsigned char bit_depth_chroma; /* Bit depth chroma minus 8. */ unsigned char full_range_flag; /* Full range flag. */ diff --git a/drivers/staging/crystalhd/crystalhd_hw.c b/drivers/staging/crystalhd/crystalhd_hw.c index 043bd49843ff..8d0680d93684 100644 --- a/drivers/staging/crystalhd/crystalhd_hw.c +++ b/drivers/staging/crystalhd/crystalhd_hw.c @@ -398,7 +398,7 @@ static void crystalhd_hw_free_rx_pkt(struct crystalhd_hw *hw, * Call back from TX - IOQ deletion. * * This routine will release the TX DMA rings allocated - * druing setup_dma rings interface. + * during setup_dma rings interface. * * Memory is allocated per DMA ring basis. This is just * a place holder to be able to create the dio queues. diff --git a/drivers/staging/crystalhd/crystalhd_hw.h b/drivers/staging/crystalhd/crystalhd_hw.h index 37809442c553..d5cb68dfe695 100644 --- a/drivers/staging/crystalhd/crystalhd_hw.h +++ b/drivers/staging/crystalhd/crystalhd_hw.h @@ -46,7 +46,7 @@ #define Cpu2HstMbx1 0x00100F04 #define MbxStat1 0x00100F08 #define Stream2Host_Intr_Sts 0x00100F24 -#define C011_RET_SUCCESS 0x0 /* Reutrn status of firmware command. */ +#define C011_RET_SUCCESS 0x0 /* Return status of firmware command. */ /* TS input status register */ #define TS_StreamAFIFOStatus 0x0010044C @@ -141,7 +141,7 @@ union link_misc_perst_deco_ctrl { uint32_t reserved0:3; /* Reserved.No Effect*/ uint32_t stop_bcm_7412_clk:1; /* 1 ->Stops branch of 27MHz clk used to clk BCM7412*/ - uint32_t reserved1:27; /* Reseved. No Effect*/ + uint32_t reserved1:27; /* Reserved. No Effect*/ }; uint32_t whole_reg; @@ -176,7 +176,7 @@ union link_misc_perst_decoder_ctrl { uint32_t res0:3; /* Reserved.No Effect*/ uint32_t stop_7412_clk:1; /* 1 ->Stops branch of 27MHz clk used to clk BCM7412*/ - uint32_t res1:27; /* Reseved. No Effect */ + uint32_t res1:27; /* Reserved. No Effect */ }; uint32_t whole_reg; diff --git a/drivers/staging/crystalhd/crystalhd_lnx.h b/drivers/staging/crystalhd/crystalhd_lnx.h index bac572a8bc2e..33d7431de837 100644 --- a/drivers/staging/crystalhd/crystalhd_lnx.h +++ b/drivers/staging/crystalhd/crystalhd_lnx.h @@ -53,7 +53,7 @@ /* OS specific PCI information structure and adapter information. */ struct crystalhd_adp { - /* Hardware borad/PCI specifics */ + /* Hardware board/PCI specifics */ char name[32]; struct pci_dev *pdev; diff --git a/drivers/staging/crystalhd/crystalhd_misc.c b/drivers/staging/crystalhd/crystalhd_misc.c index 51f698052aff..c3d024406337 100644 --- a/drivers/staging/crystalhd/crystalhd_misc.c +++ b/drivers/staging/crystalhd/crystalhd_misc.c @@ -389,7 +389,7 @@ void *bc_kern_dma_alloc(struct crystalhd_adp *adp, uint32_t sz, void *temp = NULL; if (!adp || !sz || !phy_addr) { - BCMLOG_ERR("Invalide Arg..\n"); + BCMLOG_ERR("Invalid Arg..\n"); return temp; } @@ -415,7 +415,7 @@ void bc_kern_dma_free(struct crystalhd_adp *adp, uint32_t sz, void *ka, dma_addr_t phy_addr) { if (!adp || !ka || !sz || !phy_addr) { - BCMLOG_ERR("Invalide Arg..\n"); + BCMLOG_ERR("Invalid Arg..\n"); return; } diff --git a/drivers/staging/crystalhd/crystalhd_misc.h b/drivers/staging/crystalhd/crystalhd_misc.h index aa736c8855de..77ab72a2a061 100644 --- a/drivers/staging/crystalhd/crystalhd_misc.h +++ b/drivers/staging/crystalhd/crystalhd_misc.h @@ -206,7 +206,7 @@ extern void crystalhd_show_buffer(uint32_t off, uint8_t *buff, enum _chd_log_levels { BCMLOG_ERROR = 0x80000000, /* Don't disable this option */ BCMLOG_DATA = 0x40000000, /* Data, enable by default */ - BCMLOG_SPINLOCK = 0x20000000, /* Spcial case for Spin locks*/ + BCMLOG_SPINLOCK = 0x20000000, /* Special case for Spin locks*/ /* Following are allowed only in debug mode */ BCMLOG_INFO = 0x00000001, /* Generic informational */