From: Sungbo Eo Date: Thu, 16 Dec 2021 13:14:48 +0000 (+0900) Subject: ramips: mt7620: tidy up 02_network X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cc3e390a74818464a0bfc89fc6edb3b1fefed501;p=openwrt%2Fstaging%2Fthess.git ramips: mt7620: tidy up 02_network * fix alphabetic sorting * consolidate duplicate cases Signed-off-by: Sungbo Eo --- diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 2d91911766..a00f168672 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -90,15 +90,15 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; + buffalo,whr-1166d) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" + ;; buffalo,whr-300hp2|\ buffalo,whr-600d) ucidef_add_switch "switch0" \ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0" ;; - buffalo,whr-1166d) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" - ;; comfast,cf-wr800n|\ hnet,c108) ucidef_add_switch "switch0" \ @@ -146,7 +146,8 @@ ramips_setup_interfaces() "5:lan" "6@eth0" ucidef_add_switch_attr "switch1" "enable" "false" ;; - fon,fon2601) + fon,fon2601|\ + vonets,var11n-300) ucidef_add_switch "switch0" \ "0:lan" "4:wan" "6@eth0" ;; @@ -205,8 +206,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" ;; - tplink,archer-c20i|\ tplink,archer-c20-v1|\ + tplink,archer-c20i|\ tplink,archer-c50-v1) ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" @@ -216,10 +217,6 @@ ramips_setup_interfaces() "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0" ucidef_set_interface_wan "usb0" ;; - vonets,var11n-300) - ucidef_add_switch "switch0" \ - "0:lan" "4:wan" "6@eth0" - ;; wavlink,wl-wn579x3) ucidef_add_switch "switch0" \ "5:lan" "4:wan" "6@eth0" @@ -341,6 +338,7 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$(mtd_get_mac_binary u-boot 0x1fc20)" 2) ;; lb-link,bl-w1200|\ + netis,wf2770|\ phicomm,k2-v22.4|\ phicomm,k2-v22.5|\ phicomm,k2g|\ @@ -359,10 +357,6 @@ ramips_setup_macs() linksys,e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; - netis,wf2770) - wan_mac=$(mtd_get_mac_binary factory 0x2e) - label_mac=$wan_mac - ;; tplink,archer-c2-v1|\ tplink,archer-c20-v1|\ tplink,archer-c20i|\