From: Chukun Pan Date: Fri, 15 Oct 2021 14:04:00 +0000 (+0800) Subject: rockchip: move r8152 related patches to generic X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cc2a8c25459f437e82b58b1bb94afd811cbb131f;p=openwrt%2Fstaging%2Fxback.git rockchip: move r8152 related patches to generic These patches can be used on other platforms, so move it to generic. Signed-off-by: Chukun Pan --- diff --git a/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch new file mode 100644 index 0000000000..f94d16c0ff --- /dev/null +++ b/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch @@ -0,0 +1,74 @@ +From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 02:38:31 +0200 +Subject: [PATCH] net: usb: r8152: add LED configuration from OF + +This adds the ability to configure the LED configuration register using +OF. This way, the correct value for board specific LED configuration can +be determined. + +Signed-off-by: David Bauer +--- + drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152 + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); + } + ++static int r8152_led_configuration(struct r8152 *tp) ++{ ++ u32 led_data; ++ int ret; ++ ++ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", ++ &led_data); ++ ++ if (ret) ++ return ret; ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); ++ ++ return 0; ++} ++ + static void r8152b_init(struct r8152 *tp) + { + u32 ocp_data; +@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ r8152_led_configuration(tp); + } + + static void r8153_init(struct r8152 *tp) +@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp) + tp->coalesce = COALESCE_SLOW; + break; + } ++ ++ r8152_led_configuration(tp); + } + + static void r8153b_init(struct r8152 *tp) +@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ ++ ++ r8152_led_configuration(tp); + } + + static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch new file mode 100644 index 0000000000..be262b993c --- /dev/null +++ b/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch @@ -0,0 +1,54 @@ +From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 15:30:33 +0200 +Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation + +Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet +adapters. + +Signed-off-by: David Bauer +--- + .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml +@@ -0,0 +1,36 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Realtek RTL8152/RTL8153 series USB ethernet ++ ++maintainers: ++ - David Bauer ++ ++properties: ++ compatible: ++ oneOf: ++ - items: ++ - enum: ++ - realtek,rtl8152 ++ - realtek,rtl8153 ++ ++ reg: ++ description: The device number on the USB bus ++ ++ realtek,led-data: ++ description: Value to be written to the LED configuration register. ++ ++required: ++ - compatible ++ - reg ++ ++examples: ++ - | ++ usb-eth@2 { ++ compatible = "realtek,rtl8153"; ++ reg = <2>; ++ realtek,led-data = <0x87>; ++ }; +\ No newline at end of file diff --git a/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch new file mode 100644 index 0000000000..a96661c968 --- /dev/null +++ b/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch @@ -0,0 +1,74 @@ +From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 02:38:31 +0200 +Subject: [PATCH] net: usb: r8152: add LED configuration from OF + +This adds the ability to configure the LED configuration register using +OF. This way, the correct value for board specific LED configuration can +be determined. + +Signed-off-by: David Bauer +--- + drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/net/usb/r8152.c ++++ b/drivers/net/usb/r8152.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152 + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); + } + ++static int r8152_led_configuration(struct r8152 *tp) ++{ ++ u32 led_data; ++ int ret; ++ ++ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", ++ &led_data); ++ ++ if (ret) ++ return ret; ++ ++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); ++ ++ return 0; ++} ++ + static void r8152b_init(struct r8152 *tp) + { + u32 ocp_data; +@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); ++ ++ r8152_led_configuration(tp); + } + + static void r8153_init(struct r8152 *tp) +@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp) + tp->coalesce = COALESCE_SLOW; + break; + } ++ ++ r8152_led_configuration(tp); + } + + static void r8153b_init(struct r8152 *tp) +@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ ++ ++ r8152_led_configuration(tp); + } + + static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch new file mode 100644 index 0000000000..be262b993c --- /dev/null +++ b/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch @@ -0,0 +1,54 @@ +From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Sun, 26 Jul 2020 15:30:33 +0200 +Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation + +Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet +adapters. + +Signed-off-by: David Bauer +--- + .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml +@@ -0,0 +1,36 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Realtek RTL8152/RTL8153 series USB ethernet ++ ++maintainers: ++ - David Bauer ++ ++properties: ++ compatible: ++ oneOf: ++ - items: ++ - enum: ++ - realtek,rtl8152 ++ - realtek,rtl8153 ++ ++ reg: ++ description: The device number on the USB bus ++ ++ realtek,led-data: ++ description: Value to be written to the LED configuration register. ++ ++required: ++ - compatible ++ - reg ++ ++examples: ++ - | ++ usb-eth@2 { ++ compatible = "realtek,rtl8153"; ++ reg = <2>; ++ realtek,led-data = <0x87>; ++ }; +\ No newline at end of file diff --git a/target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch deleted file mode 100644 index f94d16c0ff..0000000000 --- a/target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 26 Jul 2020 02:38:31 +0200 -Subject: [PATCH] net: usb: r8152: add LED configuration from OF - -This adds the ability to configure the LED configuration register using -OF. This way, the correct value for board specific LED configuration can -be determined. - -Signed-off-by: David Bauer ---- - drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152 - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); - } - -+static int r8152_led_configuration(struct r8152 *tp) -+{ -+ u32 led_data; -+ int ret; -+ -+ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", -+ &led_data); -+ -+ if (ret) -+ return ret; -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); -+ -+ return 0; -+} -+ - static void r8152b_init(struct r8152 *tp) - { - u32 ocp_data; -@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); - ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); - ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ r8152_led_configuration(tp); - } - - static void r8153_init(struct r8152 *tp) -@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp) - tp->coalesce = COALESCE_SLOW; - break; - } -+ -+ r8152_led_configuration(tp); - } - - static void r8153b_init(struct r8152 *tp) -@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp - rtl_tally_reset(tp); - - tp->coalesce = 15000; /* 15 us */ -+ -+ r8152_led_configuration(tp); - } - - static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch deleted file mode 100644 index be262b993c..0000000000 --- a/target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 26 Jul 2020 15:30:33 +0200 -Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation - -Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet -adapters. - -Signed-off-by: David Bauer ---- - .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ - 1 file changed, 36 insertions(+) - create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml -@@ -0,0 +1,36 @@ -+# SPDX-License-Identifier: GPL-2.0 -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Realtek RTL8152/RTL8153 series USB ethernet -+ -+maintainers: -+ - David Bauer -+ -+properties: -+ compatible: -+ oneOf: -+ - items: -+ - enum: -+ - realtek,rtl8152 -+ - realtek,rtl8153 -+ -+ reg: -+ description: The device number on the USB bus -+ -+ realtek,led-data: -+ description: Value to be written to the LED configuration register. -+ -+required: -+ - compatible -+ - reg -+ -+examples: -+ - | -+ usb-eth@2 { -+ compatible = "realtek,rtl8153"; -+ reg = <2>; -+ realtek,led-data = <0x87>; -+ }; -\ No newline at end of file diff --git a/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch deleted file mode 100644 index a96661c968..0000000000 --- a/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 26 Jul 2020 02:38:31 +0200 -Subject: [PATCH] net: usb: r8152: add LED configuration from OF - -This adds the ability to configure the LED configuration register using -OF. This way, the correct value for board specific LED configuration can -be determined. - -Signed-off-by: David Bauer ---- - drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/net/usb/r8152.c -+++ b/drivers/net/usb/r8152.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152 - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); - } - -+static int r8152_led_configuration(struct r8152 *tp) -+{ -+ u32 led_data; -+ int ret; -+ -+ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data", -+ &led_data); -+ -+ if (ret) -+ return ret; -+ -+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data); -+ -+ return 0; -+} -+ - static void r8152b_init(struct r8152 *tp) - { - u32 ocp_data; -@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); - ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); - ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); -+ -+ r8152_led_configuration(tp); - } - - static void r8153_init(struct r8152 *tp) -@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp) - tp->coalesce = COALESCE_SLOW; - break; - } -+ -+ r8152_led_configuration(tp); - } - - static void r8153b_init(struct r8152 *tp) -@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp - rtl_tally_reset(tp); - - tp->coalesce = 15000; /* 15 us */ -+ -+ r8152_led_configuration(tp); - } - - static int rtl8152_pre_reset(struct usb_interface *intf) diff --git a/target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch deleted file mode 100644 index be262b993c..0000000000 --- a/target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 26 Jul 2020 15:30:33 +0200 -Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation - -Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet -adapters. - -Signed-off-by: David Bauer ---- - .../bindings/net/realtek,rtl8152.yaml | 36 +++++++++++++++++++ - 1 file changed, 36 insertions(+) - create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml -@@ -0,0 +1,36 @@ -+# SPDX-License-Identifier: GPL-2.0 -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Realtek RTL8152/RTL8153 series USB ethernet -+ -+maintainers: -+ - David Bauer -+ -+properties: -+ compatible: -+ oneOf: -+ - items: -+ - enum: -+ - realtek,rtl8152 -+ - realtek,rtl8153 -+ -+ reg: -+ description: The device number on the USB bus -+ -+ realtek,led-data: -+ description: Value to be written to the LED configuration register. -+ -+required: -+ - compatible -+ - reg -+ -+examples: -+ - | -+ usb-eth@2 { -+ compatible = "realtek,rtl8153"; -+ reg = <2>; -+ realtek,led-data = <0x87>; -+ }; -\ No newline at end of file