From: Mauro Carvalho Chehab Date: Wed, 12 Jun 2019 17:53:01 +0000 (-0300) Subject: docs: watchdog: convert docs to ReST and rename to *.rst X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cc2a2d19f896d174cad16c2348100bec49c00958;p=openwrt%2Fstaging%2Fblogic.git docs: watchdog: convert docs to ReST and rename to *.rst Convert those documents and prepare them to be part of the kernel API book, as most of the stuff there are related to the Kernel interfaces. Still, in the future, it would make sense to split the docs, as some of the stuff is clearly focused on sysadmin tasks. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Guenter Roeck Signed-off-by: Jonathan Corbet --- diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2148fd289851..9ac37fcca3ee 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5160,7 +5160,7 @@ Default: 3 = cyan. watchdog timers [HW,WDT] For information on watchdog timers, - see Documentation/watchdog/watchdog-parameters.txt + see Documentation/watchdog/watchdog-parameters.rst or other driver-specific files in the Documentation/watchdog/ directory. diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt index 23b0c8b20cd1..5623b9916411 100644 --- a/Documentation/kernel-per-CPU-kthreads.txt +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -348,7 +348,7 @@ To reduce its OS jitter, do at least one of the following: 2. Boot with "nosoftlockup=0", which will also prevent these kthreads from being created. Other related watchdog and softlockup boot parameters may be found in Documentation/admin-guide/kernel-parameters.rst - and Documentation/watchdog/watchdog-parameters.txt. + and Documentation/watchdog/watchdog-parameters.rst. 3. Echo a zero to /proc/sys/kernel/watchdog to disable the watchdog timer. 4. Echo a large number of /proc/sys/kernel/watchdog_thresh in diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.rst b/Documentation/watchdog/convert_drivers_to_kernel_api.rst new file mode 100644 index 000000000000..dd934cc08e40 --- /dev/null +++ b/Documentation/watchdog/convert_drivers_to_kernel_api.rst @@ -0,0 +1,219 @@ +========================================================= +Converting old watchdog drivers to the watchdog framework +========================================================= + +by Wolfram Sang + +Before the watchdog framework came into the kernel, every driver had to +implement the API on its own. Now, as the framework factored out the common +components, those drivers can be lightened making it a user of the framework. +This document shall guide you for this task. The necessary steps are described +as well as things to look out for. + + +Remove the file_operations struct +--------------------------------- + +Old drivers define their own file_operations for actions like open(), write(), +etc... These are now handled by the framework and just call the driver when +needed. So, in general, the 'file_operations' struct and assorted functions can +go. Only very few driver-specific details have to be moved to other functions. +Here is a overview of the functions and probably needed actions: + +- open: Everything dealing with resource management (file-open checks, magic + close preparations) can simply go. Device specific stuff needs to go to the + driver specific start-function. Note that for some drivers, the start-function + also serves as the ping-function. If that is the case and you need start/stop + to be balanced (clocks!), you are better off refactoring a separate start-function. + +- close: Same hints as for open apply. + +- write: Can simply go, all defined behaviour is taken care of by the framework, + i.e. ping on write and magic char ('V') handling. + +- ioctl: While the driver is allowed to have extensions to the IOCTL interface, + the most common ones are handled by the framework, supported by some assistance + from the driver: + + WDIOC_GETSUPPORT: + Returns the mandatory watchdog_info struct from the driver + + WDIOC_GETSTATUS: + Needs the status-callback defined, otherwise returns 0 + + WDIOC_GETBOOTSTATUS: + Needs the bootstatus member properly set. Make sure it is 0 if you + don't have further support! + + WDIOC_SETOPTIONS: + No preparations needed + + WDIOC_KEEPALIVE: + If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING + set + + WDIOC_SETTIMEOUT: + Options in watchdog_info need to have WDIOF_SETTIMEOUT set + and a set_timeout-callback has to be defined. The core will also + do limit-checking, if min_timeout and max_timeout in the watchdog + device are set. All is optional. + + WDIOC_GETTIMEOUT: + No preparations needed + + WDIOC_GETTIMELEFT: + It needs get_timeleft() callback to be defined. Otherwise it + will return EOPNOTSUPP + + Other IOCTLs can be served using the ioctl-callback. Note that this is mainly + intended for porting old drivers; new drivers should not invent private IOCTLs. + Private IOCTLs are processed first. When the callback returns with + -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error + is directly given to the user. + +Example conversion:: + + -static const struct file_operations s3c2410wdt_fops = { + - .owner = THIS_MODULE, + - .llseek = no_llseek, + - .write = s3c2410wdt_write, + - .unlocked_ioctl = s3c2410wdt_ioctl, + - .open = s3c2410wdt_open, + - .release = s3c2410wdt_release, + -}; + +Check the functions for device-specific stuff and keep it for later +refactoring. The rest can go. + + +Remove the miscdevice +--------------------- + +Since the file_operations are gone now, you can also remove the 'struct +miscdevice'. The framework will create it on watchdog_dev_register() called by +watchdog_register_device():: + + -static struct miscdevice s3c2410wdt_miscdev = { + - .minor = WATCHDOG_MINOR, + - .name = "watchdog", + - .fops = &s3c2410wdt_fops, + -}; + + +Remove obsolete includes and defines +------------------------------------ + +Because of the simplifications, a few defines are probably unused now. Remove +them. Includes can be removed, too. For example:: + + - #include + - #include (if MODULE_ALIAS_MISCDEV is not used) + - #include (if no custom IOCTLs are used) + + +Add the watchdog operations +--------------------------- + +All possible callbacks are defined in 'struct watchdog_ops'. You can find it +explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and +owner must be set, the rest are optional. You will easily find corresponding +functions in the old driver. Note that you will now get a pointer to the +watchdog_device as a parameter to these functions, so you probably have to +change the function header. Other changes are most likely not needed, because +here simply happens the direct hardware access. If you have device-specific +code left from the above steps, it should be refactored into these callbacks. + +Here is a simple example:: + + +static struct watchdog_ops s3c2410wdt_ops = { + + .owner = THIS_MODULE, + + .start = s3c2410wdt_start, + + .stop = s3c2410wdt_stop, + + .ping = s3c2410wdt_keepalive, + + .set_timeout = s3c2410wdt_set_heartbeat, + +}; + +A typical function-header change looks like:: + + -static void s3c2410wdt_keepalive(void) + +static int s3c2410wdt_keepalive(struct watchdog_device *wdd) + { + ... + + + + return 0; + } + + ... + + - s3c2410wdt_keepalive(); + + s3c2410wdt_keepalive(&s3c2410_wdd); + + +Add the watchdog device +----------------------- + +Now we need to create a 'struct watchdog_device' and populate it with the +necessary information for the framework. The struct is also explained in detail +in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory +watchdog_info struct and the newly created watchdog_ops. Often, old drivers +have their own record-keeping for things like bootstatus and timeout using +static variables. Those have to be converted to use the members in +watchdog_device. Note that the timeout values are unsigned int. Some drivers +use signed int, so this has to be converted, too. + +Here is a simple example for a watchdog device:: + + +static struct watchdog_device s3c2410_wdd = { + + .info = &s3c2410_wdt_ident, + + .ops = &s3c2410wdt_ops, + +}; + + +Handle the 'nowayout' feature +----------------------------- + +A few drivers use nowayout statically, i.e. there is no module parameter for it +and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be +used. This needs to be converted by initializing the status variable of the +watchdog_device like this:: + + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, + +Most drivers, however, also allow runtime configuration of nowayout, usually +by adding a module parameter. The conversion for this would be something like:: + + watchdog_set_nowayout(&s3c2410_wdd, nowayout); + +The module parameter itself needs to stay, everything else related to nowayout +can go, though. This will likely be some code in open(), close() or write(). + + +Register the watchdog device +---------------------------- + +Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev). +Make sure the return value gets checked and the error message, if present, +still fits. Also convert the unregister case:: + + - ret = misc_register(&s3c2410wdt_miscdev); + + ret = watchdog_register_device(&s3c2410_wdd); + + ... + + - misc_deregister(&s3c2410wdt_miscdev); + + watchdog_unregister_device(&s3c2410_wdd); + + +Update the Kconfig-entry +------------------------ + +The entry for the driver now needs to select WATCHDOG_CORE: + + + select WATCHDOG_CORE + + +Create a patch and send it to upstream +-------------------------------------- + +Make sure you understood Documentation/process/submitting-patches.rst and send your patch to +linux-watchdog@vger.kernel.org. We are looking forward to it :) diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.txt deleted file mode 100644 index 9fffb2958d13..000000000000 --- a/Documentation/watchdog/convert_drivers_to_kernel_api.txt +++ /dev/null @@ -1,218 +0,0 @@ -Converting old watchdog drivers to the watchdog framework -by Wolfram Sang -========================================================= - -Before the watchdog framework came into the kernel, every driver had to -implement the API on its own. Now, as the framework factored out the common -components, those drivers can be lightened making it a user of the framework. -This document shall guide you for this task. The necessary steps are described -as well as things to look out for. - - -Remove the file_operations struct ---------------------------------- - -Old drivers define their own file_operations for actions like open(), write(), -etc... These are now handled by the framework and just call the driver when -needed. So, in general, the 'file_operations' struct and assorted functions can -go. Only very few driver-specific details have to be moved to other functions. -Here is a overview of the functions and probably needed actions: - -- open: Everything dealing with resource management (file-open checks, magic - close preparations) can simply go. Device specific stuff needs to go to the - driver specific start-function. Note that for some drivers, the start-function - also serves as the ping-function. If that is the case and you need start/stop - to be balanced (clocks!), you are better off refactoring a separate start-function. - -- close: Same hints as for open apply. - -- write: Can simply go, all defined behaviour is taken care of by the framework, - i.e. ping on write and magic char ('V') handling. - -- ioctl: While the driver is allowed to have extensions to the IOCTL interface, - the most common ones are handled by the framework, supported by some assistance - from the driver: - - WDIOC_GETSUPPORT: - Returns the mandatory watchdog_info struct from the driver - - WDIOC_GETSTATUS: - Needs the status-callback defined, otherwise returns 0 - - WDIOC_GETBOOTSTATUS: - Needs the bootstatus member properly set. Make sure it is 0 if you - don't have further support! - - WDIOC_SETOPTIONS: - No preparations needed - - WDIOC_KEEPALIVE: - If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING - set - - WDIOC_SETTIMEOUT: - Options in watchdog_info need to have WDIOF_SETTIMEOUT set - and a set_timeout-callback has to be defined. The core will also - do limit-checking, if min_timeout and max_timeout in the watchdog - device are set. All is optional. - - WDIOC_GETTIMEOUT: - No preparations needed - - WDIOC_GETTIMELEFT: - It needs get_timeleft() callback to be defined. Otherwise it - will return EOPNOTSUPP - - Other IOCTLs can be served using the ioctl-callback. Note that this is mainly - intended for porting old drivers; new drivers should not invent private IOCTLs. - Private IOCTLs are processed first. When the callback returns with - -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error - is directly given to the user. - -Example conversion: - --static const struct file_operations s3c2410wdt_fops = { -- .owner = THIS_MODULE, -- .llseek = no_llseek, -- .write = s3c2410wdt_write, -- .unlocked_ioctl = s3c2410wdt_ioctl, -- .open = s3c2410wdt_open, -- .release = s3c2410wdt_release, --}; - -Check the functions for device-specific stuff and keep it for later -refactoring. The rest can go. - - -Remove the miscdevice ---------------------- - -Since the file_operations are gone now, you can also remove the 'struct -miscdevice'. The framework will create it on watchdog_dev_register() called by -watchdog_register_device(). - --static struct miscdevice s3c2410wdt_miscdev = { -- .minor = WATCHDOG_MINOR, -- .name = "watchdog", -- .fops = &s3c2410wdt_fops, --}; - - -Remove obsolete includes and defines ------------------------------------- - -Because of the simplifications, a few defines are probably unused now. Remove -them. Includes can be removed, too. For example: - -- #include -- #include (if MODULE_ALIAS_MISCDEV is not used) -- #include (if no custom IOCTLs are used) - - -Add the watchdog operations ---------------------------- - -All possible callbacks are defined in 'struct watchdog_ops'. You can find it -explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and -owner must be set, the rest are optional. You will easily find corresponding -functions in the old driver. Note that you will now get a pointer to the -watchdog_device as a parameter to these functions, so you probably have to -change the function header. Other changes are most likely not needed, because -here simply happens the direct hardware access. If you have device-specific -code left from the above steps, it should be refactored into these callbacks. - -Here is a simple example: - -+static struct watchdog_ops s3c2410wdt_ops = { -+ .owner = THIS_MODULE, -+ .start = s3c2410wdt_start, -+ .stop = s3c2410wdt_stop, -+ .ping = s3c2410wdt_keepalive, -+ .set_timeout = s3c2410wdt_set_heartbeat, -+}; - -A typical function-header change looks like: - --static void s3c2410wdt_keepalive(void) -+static int s3c2410wdt_keepalive(struct watchdog_device *wdd) - { -... -+ -+ return 0; - } - -... - -- s3c2410wdt_keepalive(); -+ s3c2410wdt_keepalive(&s3c2410_wdd); - - -Add the watchdog device ------------------------ - -Now we need to create a 'struct watchdog_device' and populate it with the -necessary information for the framework. The struct is also explained in detail -in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory -watchdog_info struct and the newly created watchdog_ops. Often, old drivers -have their own record-keeping for things like bootstatus and timeout using -static variables. Those have to be converted to use the members in -watchdog_device. Note that the timeout values are unsigned int. Some drivers -use signed int, so this has to be converted, too. - -Here is a simple example for a watchdog device: - -+static struct watchdog_device s3c2410_wdd = { -+ .info = &s3c2410_wdt_ident, -+ .ops = &s3c2410wdt_ops, -+}; - - -Handle the 'nowayout' feature ------------------------------ - -A few drivers use nowayout statically, i.e. there is no module parameter for it -and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be -used. This needs to be converted by initializing the status variable of the -watchdog_device like this: - - .status = WATCHDOG_NOWAYOUT_INIT_STATUS, - -Most drivers, however, also allow runtime configuration of nowayout, usually -by adding a module parameter. The conversion for this would be something like: - - watchdog_set_nowayout(&s3c2410_wdd, nowayout); - -The module parameter itself needs to stay, everything else related to nowayout -can go, though. This will likely be some code in open(), close() or write(). - - -Register the watchdog device ----------------------------- - -Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev). -Make sure the return value gets checked and the error message, if present, -still fits. Also convert the unregister case. - -- ret = misc_register(&s3c2410wdt_miscdev); -+ ret = watchdog_register_device(&s3c2410_wdd); - -... - -- misc_deregister(&s3c2410wdt_miscdev); -+ watchdog_unregister_device(&s3c2410_wdd); - - -Update the Kconfig-entry ------------------------- - -The entry for the driver now needs to select WATCHDOG_CORE: - -+ select WATCHDOG_CORE - - -Create a patch and send it to upstream --------------------------------------- - -Make sure you understood Documentation/process/submitting-patches.rst and send your patch to -linux-watchdog@vger.kernel.org. We are looking forward to it :) - diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst new file mode 100644 index 000000000000..94a96371113e --- /dev/null +++ b/Documentation/watchdog/hpwdt.rst @@ -0,0 +1,73 @@ +=========================== +HPE iLO NMI Watchdog Driver +=========================== + +for iLO based ProLiant Servers +============================== + +Last reviewed: 08/20/2018 + + + The HPE iLO NMI Watchdog driver is a kernel module that provides basic + watchdog functionality and handler for the iLO "Generate NMI to System" + virtual button. + + All references to iLO in this document imply it also works on iLO2 and all + subsequent generations. + + Watchdog functionality is enabled like any other common watchdog driver. That + is, an application needs to be started that kicks off the watchdog timer. A + basic application exists in tools/testing/selftests/watchdog/ named + watchdog-test.c. Simply compile the C file and kick it off. If the system + gets into a bad state and hangs, the HPE ProLiant iLO timer register will + not be updated in a timely fashion and a hardware system reset (also known as + an Automatic Server Recovery (ASR)) event will occur. + + The hpwdt driver also has the following module parameters: + + ============ ================================================================ + soft_margin allows the user to set the watchdog timer value. + Default value is 30 seconds. + timeout an alias of soft_margin. + pretimeout allows the user to set the watchdog pretimeout value. + This is the number of seconds before timeout when an + NMI is delivered to the system. Setting the value to + zero disables the pretimeout NMI. + Default value is 9 seconds. + nowayout basic watchdog parameter that does not allow the timer to + be restarted or an impending ASR to be escaped. + Default value is set when compiling the kernel. If it is set + to "Y", then there is no way of disabling the watchdog once + it has been started. + ============ ================================================================ + + NOTE: + More information about watchdog drivers in general, including the ioctl + interface to /dev/watchdog can be found in + Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.txt. + + Due to limitations in the iLO hardware, the NMI pretimeout if enabled, + can only be set to 9 seconds. Attempts to set pretimeout to other + non-zero values will be rounded, possibly to zero. Users should verify + the pretimeout value after attempting to set pretimeout or timeout. + + Upon receipt of an NMI from the iLO, the hpwdt driver will initiate a + panic. This is to allow for a crash dump to be collected. It is incumbent + upon the user to have properly configured the system for kdump. + + The default Linux kernel behavior upon panic is to print a kernel tombstone + and loop forever. This is generally not what a watchdog user wants. + + For those wishing to learn more please see: + Documentation/kdump/kdump.rst + Documentation/admin-guide/kernel-parameters.txt (panic=) + Your Linux Distribution specific documentation. + + If the hpwdt does not receive the NMI associated with an expiring timer, + the iLO will proceed to reset the system at timeout if the timer hasn't + been updated. + +-- + + The HPE iLO NMI Watchdog Driver and documentation were originally developed + by Tom Mingarelli. diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt deleted file mode 100644 index aaa9e4b4bdcd..000000000000 --- a/Documentation/watchdog/hpwdt.txt +++ /dev/null @@ -1,66 +0,0 @@ -Last reviewed: 08/20/2018 - - HPE iLO NMI Watchdog Driver - for iLO based ProLiant Servers - - The HPE iLO NMI Watchdog driver is a kernel module that provides basic - watchdog functionality and handler for the iLO "Generate NMI to System" - virtual button. - - All references to iLO in this document imply it also works on iLO2 and all - subsequent generations. - - Watchdog functionality is enabled like any other common watchdog driver. That - is, an application needs to be started that kicks off the watchdog timer. A - basic application exists in tools/testing/selftests/watchdog/ named - watchdog-test.c. Simply compile the C file and kick it off. If the system - gets into a bad state and hangs, the HPE ProLiant iLO timer register will - not be updated in a timely fashion and a hardware system reset (also known as - an Automatic Server Recovery (ASR)) event will occur. - - The hpwdt driver also has the following module parameters: - - soft_margin - allows the user to set the watchdog timer value. - Default value is 30 seconds. - timeout - an alias of soft_margin. - pretimeout - allows the user to set the watchdog pretimeout value. - This is the number of seconds before timeout when an - NMI is delivered to the system. Setting the value to - zero disables the pretimeout NMI. - Default value is 9 seconds. - nowayout - basic watchdog parameter that does not allow the timer to - be restarted or an impending ASR to be escaped. - Default value is set when compiling the kernel. If it is set - to "Y", then there is no way of disabling the watchdog once - it has been started. - - NOTE: More information about watchdog drivers in general, including the ioctl - interface to /dev/watchdog can be found in - Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt. - - Due to limitations in the iLO hardware, the NMI pretimeout if enabled, - can only be set to 9 seconds. Attempts to set pretimeout to other - non-zero values will be rounded, possibly to zero. Users should verify - the pretimeout value after attempting to set pretimeout or timeout. - - Upon receipt of an NMI from the iLO, the hpwdt driver will initiate a - panic. This is to allow for a crash dump to be collected. It is incumbent - upon the user to have properly configured the system for kdump. - - The default Linux kernel behavior upon panic is to print a kernel tombstone - and loop forever. This is generally not what a watchdog user wants. - - For those wishing to learn more please see: - Documentation/kdump/kdump.rst - Documentation/admin-guide/kernel-parameters.txt (panic=) - Your Linux Distribution specific documentation. - - If the hpwdt does not receive the NMI associated with an expiring timer, - the iLO will proceed to reset the system at timeout if the timer hasn't - been updated. - --- - - The HPE iLO NMI Watchdog Driver and documentation were originally developed - by Tom Mingarelli. - diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst new file mode 100644 index 000000000000..33a0de631e84 --- /dev/null +++ b/Documentation/watchdog/index.rst @@ -0,0 +1,25 @@ +:orphan: + +====================== +Linux Watchdog Support +====================== + +.. toctree:: + :maxdepth: 1 + + hpwdt + mlx-wdt + pcwd-watchdog + watchdog-api + watchdog-kernel-api + watchdog-parameters + watchdog-pm + wdt + convert_drivers_to_kernel_api + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/watchdog/mlx-wdt.rst b/Documentation/watchdog/mlx-wdt.rst new file mode 100644 index 000000000000..bf5bafac47f0 --- /dev/null +++ b/Documentation/watchdog/mlx-wdt.rst @@ -0,0 +1,56 @@ +========================= +Mellanox watchdog drivers +========================= + +for x86 based system switches +============================= + +This driver provides watchdog functionality for various Mellanox +Ethernet and Infiniband switch systems. + +Mellanox watchdog device is implemented in a programmable logic device. + +There are 2 types of HW watchdog implementations. + +Type 1: + Actual HW timeout can be defined as a power of 2 msec. + e.g. timeout 20 sec will be rounded up to 32768 msec. + The maximum timeout period is 32 sec (32768 msec.), + Get time-left isn't supported + +Type 2: + Actual HW timeout is defined in sec. and it's the same as + a user-defined timeout. + Maximum timeout is 255 sec. + Get time-left is supported. + +Type 1 HW watchdog implementation exist in old systems and +all new systems have type 2 HW watchdog. +Two types of HW implementation have also different register map. + +Mellanox system can have 2 watchdogs: main and auxiliary. +Main and auxiliary watchdog devices can be enabled together +on the same system. +There are several actions that can be defined in the watchdog: +system reset, start fans on full speed and increase register counter. +The last 2 actions are performed without a system reset. +Actions without reset are provided for auxiliary watchdog device, +which is optional. +Watchdog can be started during a probe, in this case it will be +pinged by watchdog core before watchdog device will be opened by +user space application. +Watchdog can be initialised in nowayout way, i.e. oncse started +it can't be stopped. + +This mlx-wdt driver supports both HW watchdog implementations. + +Watchdog driver is probed from the common mlx_platform driver. +Mlx_platform driver provides an appropriate set of registers for +Mellanox watchdog device, identity name (mlx-wdt-main or mlx-wdt-aux), +initial timeout, performed action in expiration and configuration flags. +watchdog configuration flags: nowayout and start_at_boot, hw watchdog +version - type1 or type2. +The driver checks during initialization if the previous system reset +was done by the watchdog. If yes, it makes a notification about this event. + +Access to HW registers is performed through a generic regmap interface. diff --git a/Documentation/watchdog/mlx-wdt.txt b/Documentation/watchdog/mlx-wdt.txt deleted file mode 100644 index 66eeb78505c3..000000000000 --- a/Documentation/watchdog/mlx-wdt.txt +++ /dev/null @@ -1,52 +0,0 @@ - Mellanox watchdog drivers - for x86 based system switches - -This driver provides watchdog functionality for various Mellanox -Ethernet and Infiniband switch systems. - -Mellanox watchdog device is implemented in a programmable logic device. - -There are 2 types of HW watchdog implementations. - -Type 1: -Actual HW timeout can be defined as a power of 2 msec. -e.g. timeout 20 sec will be rounded up to 32768 msec. -The maximum timeout period is 32 sec (32768 msec.), -Get time-left isn't supported - -Type 2: -Actual HW timeout is defined in sec. and it's the same as -a user-defined timeout. -Maximum timeout is 255 sec. -Get time-left is supported. - -Type 1 HW watchdog implementation exist in old systems and -all new systems have type 2 HW watchdog. -Two types of HW implementation have also different register map. - -Mellanox system can have 2 watchdogs: main and auxiliary. -Main and auxiliary watchdog devices can be enabled together -on the same system. -There are several actions that can be defined in the watchdog: -system reset, start fans on full speed and increase register counter. -The last 2 actions are performed without a system reset. -Actions without reset are provided for auxiliary watchdog device, -which is optional. -Watchdog can be started during a probe, in this case it will be -pinged by watchdog core before watchdog device will be opened by -user space application. -Watchdog can be initialised in nowayout way, i.e. oncse started -it can't be stopped. - -This mlx-wdt driver supports both HW watchdog implementations. - -Watchdog driver is probed from the common mlx_platform driver. -Mlx_platform driver provides an appropriate set of registers for -Mellanox watchdog device, identity name (mlx-wdt-main or mlx-wdt-aux), -initial timeout, performed action in expiration and configuration flags. -watchdog configuration flags: nowayout and start_at_boot, hw watchdog -version - type1 or type2. -The driver checks during initialization if the previous system reset -was done by the watchdog. If yes, it makes a notification about this event. - -Access to HW registers is performed through a generic regmap interface. diff --git a/Documentation/watchdog/pcwd-watchdog.rst b/Documentation/watchdog/pcwd-watchdog.rst new file mode 100644 index 000000000000..405e2a370082 --- /dev/null +++ b/Documentation/watchdog/pcwd-watchdog.rst @@ -0,0 +1,71 @@ +=================================== +Berkshire Products PC Watchdog Card +=================================== + +Last reviewed: 10/05/2007 + +Support for ISA Cards Revision A and C +======================================= + +Documentation and Driver by Ken Hollis + + The PC Watchdog is a card that offers the same type of functionality that + the WDT card does, only it doesn't require an IRQ to run. Furthermore, + the Revision C card allows you to monitor any IO Port to automatically + trigger the card into being reset. This way you can make the card + monitor hard drive status, or anything else you need. + + The Watchdog Driver has one basic role: to talk to the card and send + signals to it so it doesn't reset your computer ... at least during + normal operation. + + The Watchdog Driver will automatically find your watchdog card, and will + attach a running driver for use with that card. After the watchdog + drivers have initialized, you can then talk to the card using a PC + Watchdog program. + + I suggest putting a "watchdog -d" before the beginning of an fsck, and + a "watchdog -e -t 1" immediately after the end of an fsck. (Remember + to run the program with an "&" to run it in the background!) + + If you want to write a program to be compatible with the PC Watchdog + driver, simply use of modify the watchdog test program: + tools/testing/selftests/watchdog/watchdog-test.c + + + Other IOCTL functions include: + + WDIOC_GETSUPPORT + This returns the support of the card itself. This + returns in structure "PCWDS" which returns: + + options = WDIOS_TEMPPANIC + (This card supports temperature) + firmware_version = xxxx + (Firmware version of the card) + + WDIOC_GETSTATUS + This returns the status of the card, with the bits of + WDIOF_* bitwise-anded into the value. (The comments + are in linux/pcwd.h) + + WDIOC_GETBOOTSTATUS + This returns the status of the card that was reported + at bootup. + + WDIOC_GETTEMP + This returns the temperature of the card. (You can also + read /dev/watchdog, which gives a temperature update + every second.) + + WDIOC_SETOPTIONS + This lets you set the options of the card. You can either + enable or disable the card this way. + + WDIOC_KEEPALIVE + This pings the card to tell it not to reset your computer. + + And that's all she wrote! + + -- Ken Hollis + (kenji@bitgate.com) diff --git a/Documentation/watchdog/pcwd-watchdog.txt b/Documentation/watchdog/pcwd-watchdog.txt deleted file mode 100644 index b8e60a441a43..000000000000 --- a/Documentation/watchdog/pcwd-watchdog.txt +++ /dev/null @@ -1,66 +0,0 @@ -Last reviewed: 10/05/2007 - - Berkshire Products PC Watchdog Card - Support for ISA Cards Revision A and C - Documentation and Driver by Ken Hollis - - The PC Watchdog is a card that offers the same type of functionality that - the WDT card does, only it doesn't require an IRQ to run. Furthermore, - the Revision C card allows you to monitor any IO Port to automatically - trigger the card into being reset. This way you can make the card - monitor hard drive status, or anything else you need. - - The Watchdog Driver has one basic role: to talk to the card and send - signals to it so it doesn't reset your computer ... at least during - normal operation. - - The Watchdog Driver will automatically find your watchdog card, and will - attach a running driver for use with that card. After the watchdog - drivers have initialized, you can then talk to the card using a PC - Watchdog program. - - I suggest putting a "watchdog -d" before the beginning of an fsck, and - a "watchdog -e -t 1" immediately after the end of an fsck. (Remember - to run the program with an "&" to run it in the background!) - - If you want to write a program to be compatible with the PC Watchdog - driver, simply use of modify the watchdog test program: - tools/testing/selftests/watchdog/watchdog-test.c - - - Other IOCTL functions include: - - WDIOC_GETSUPPORT - This returns the support of the card itself. This - returns in structure "PCWDS" which returns: - options = WDIOS_TEMPPANIC - (This card supports temperature) - firmware_version = xxxx - (Firmware version of the card) - - WDIOC_GETSTATUS - This returns the status of the card, with the bits of - WDIOF_* bitwise-anded into the value. (The comments - are in linux/pcwd.h) - - WDIOC_GETBOOTSTATUS - This returns the status of the card that was reported - at bootup. - - WDIOC_GETTEMP - This returns the temperature of the card. (You can also - read /dev/watchdog, which gives a temperature update - every second.) - - WDIOC_SETOPTIONS - This lets you set the options of the card. You can either - enable or disable the card this way. - - WDIOC_KEEPALIVE - This pings the card to tell it not to reset your computer. - - And that's all she wrote! - - -- Ken Hollis - (kenji@bitgate.com) - diff --git a/Documentation/watchdog/watchdog-api.rst b/Documentation/watchdog/watchdog-api.rst new file mode 100644 index 000000000000..c6c1e9fa9f73 --- /dev/null +++ b/Documentation/watchdog/watchdog-api.rst @@ -0,0 +1,271 @@ +============================= +The Linux Watchdog driver API +============================= + +Last reviewed: 10/05/2007 + + + +Copyright 2002 Christer Weingel + +Some parts of this document are copied verbatim from the sbc60xxwdt +driver which is (c) Copyright 2000 Jakob Oestergaard + +This document describes the state of the Linux 2.4.18 kernel. + +Introduction +============ + +A Watchdog Timer (WDT) is a hardware circuit that can reset the +computer system in case of a software fault. You probably knew that +already. + +Usually a userspace daemon will notify the kernel watchdog driver via the +/dev/watchdog special device file that userspace is still alive, at +regular intervals. When such a notification occurs, the driver will +usually tell the hardware watchdog that everything is in order, and +that the watchdog should wait for yet another little while to reset +the system. If userspace fails (RAM error, kernel bug, whatever), the +notifications cease to occur, and the hardware watchdog will reset the +system (causing a reboot) after the timeout occurs. + +The Linux watchdog API is a rather ad-hoc construction and different +drivers implement different, and sometimes incompatible, parts of it. +This file is an attempt to document the existing usage and allow +future driver writers to use it as a reference. + +The simplest API +================ + +All drivers support the basic mode of operation, where the watchdog +activates as soon as /dev/watchdog is opened and will reboot unless +the watchdog is pinged within a certain time, this time is called the +timeout or margin. The simplest way to ping the watchdog is to write +some data to the device. So a very simple watchdog daemon would look +like this source file: see samples/watchdog/watchdog-simple.c + +A more advanced driver could for example check that a HTTP server is +still responding before doing the write call to ping the watchdog. + +When the device is closed, the watchdog is disabled, unless the "Magic +Close" feature is supported (see below). This is not always such a +good idea, since if there is a bug in the watchdog daemon and it +crashes the system will not reboot. Because of this, some of the +drivers support the configuration option "Disable watchdog shutdown on +close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling +the kernel, there is no way of disabling the watchdog once it has been +started. So, if the watchdog daemon crashes, the system will reboot +after the timeout has passed. Watchdog devices also usually support +the nowayout module parameter so that this option can be controlled at +runtime. + +Magic Close feature +=================== + +If a driver supports "Magic Close", the driver will not disable the +watchdog unless a specific magic character 'V' has been sent to +/dev/watchdog just before closing the file. If the userspace daemon +closes the file without sending this special character, the driver +will assume that the daemon (and userspace in general) died, and will +stop pinging the watchdog without disabling it first. This will then +cause a reboot if the watchdog is not re-opened in sufficient time. + +The ioctl API +============= + +All conforming drivers also support an ioctl API. + +Pinging the watchdog using an ioctl: + +All drivers that have an ioctl interface support at least one ioctl, +KEEPALIVE. This ioctl does exactly the same thing as a write to the +watchdog device, so the main loop in the above program could be +replaced with:: + + while (1) { + ioctl(fd, WDIOC_KEEPALIVE, 0); + sleep(10); + } + +the argument to the ioctl is ignored. + +Setting and getting the timeout +=============================== + +For some drivers it is possible to modify the watchdog timeout on the +fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT +flag set in their option field. The argument is an integer +representing the timeout in seconds. The driver returns the real +timeout used in the same variable, and this timeout might differ from +the requested one due to limitation of the hardware:: + + int timeout = 45; + ioctl(fd, WDIOC_SETTIMEOUT, &timeout); + printf("The timeout was set to %d seconds\n", timeout); + +This example might actually print "The timeout was set to 60 seconds" +if the device has a granularity of minutes for its timeout. + +Starting with the Linux 2.4.18 kernel, it is possible to query the +current timeout using the GETTIMEOUT ioctl:: + + ioctl(fd, WDIOC_GETTIMEOUT, &timeout); + printf("The timeout was is %d seconds\n", timeout); + +Pretimeouts +=========== + +Some watchdog timers can be set to have a trigger go off before the +actual time they will reset the system. This can be done with an NMI, +interrupt, or other mechanism. This allows Linux to record useful +information (like panic information and kernel coredumps) before it +resets:: + + pretimeout = 10; + ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout); + +Note that the pretimeout is the number of seconds before the time +when the timeout will go off. It is not the number of seconds until +the pretimeout. So, for instance, if you set the timeout to 60 seconds +and the pretimeout to 10 seconds, the pretimeout will go off in 50 +seconds. Setting a pretimeout to zero disables it. + +There is also a get function for getting the pretimeout:: + + ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout); + printf("The pretimeout was is %d seconds\n", timeout); + +Not all watchdog drivers will support a pretimeout. + +Get the number of seconds before reboot +======================================= + +Some watchdog drivers have the ability to report the remaining time +before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl +that returns the number of seconds before reboot:: + + ioctl(fd, WDIOC_GETTIMELEFT, &timeleft); + printf("The timeout was is %d seconds\n", timeleft); + +Environmental monitoring +======================== + +All watchdog drivers are required return more information about the system, +some do temperature, fan and power level monitoring, some can tell you +the reason for the last reboot of the system. The GETSUPPORT ioctl is +available to ask what the device can do:: + + struct watchdog_info ident; + ioctl(fd, WDIOC_GETSUPPORT, &ident); + +the fields returned in the ident struct are: + + ================ ============================================= + identity a string identifying the watchdog driver + firmware_version the firmware version of the card if available + options a flags describing what the device supports + ================ ============================================= + +the options field can have the following bits set, and describes what +kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can +return. [FIXME -- Is this correct?] + + ================ ========================= + WDIOF_OVERHEAT Reset due to CPU overheat + ================ ========================= + +The machine was last rebooted by the watchdog because the thermal limit was +exceeded: + + ============== ========== + WDIOF_FANFAULT Fan failed + ============== ========== + +A system fan monitored by the watchdog card has failed + + ============= ================ + WDIOF_EXTERN1 External relay 1 + ============= ================ + +External monitoring relay/source 1 was triggered. Controllers intended for +real world applications include external monitoring pins that will trigger +a reset. + + ============= ================ + WDIOF_EXTERN2 External relay 2 + ============= ================ + +External monitoring relay/source 2 was triggered + + ================ ===================== + WDIOF_POWERUNDER Power bad/power fault + ================ ===================== + +The machine is showing an undervoltage status + + =============== ============================= + WDIOF_CARDRESET Card previously reset the CPU + =============== ============================= + +The last reboot was caused by the watchdog card + + ================ ===================== + WDIOF_POWEROVER Power over voltage + ================ ===================== + +The machine is showing an overvoltage status. Note that if one level is +under and one over both bits will be set - this may seem odd but makes +sense. + + =================== ===================== + WDIOF_KEEPALIVEPING Keep alive ping reply + =================== ===================== + +The watchdog saw a keepalive ping since it was last queried. + + ================ ======================= + WDIOF_SETTIMEOUT Can set/get the timeout + ================ ======================= + +The watchdog can do pretimeouts. + + ================ ================================ + WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set + ================ ================================ + + +For those drivers that return any bits set in the option field, the +GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current +status, and the status at the last reboot, respectively:: + + int flags; + ioctl(fd, WDIOC_GETSTATUS, &flags); + + or + + ioctl(fd, WDIOC_GETBOOTSTATUS, &flags); + +Note that not all devices support these two calls, and some only +support the GETBOOTSTATUS call. + +Some drivers can measure the temperature using the GETTEMP ioctl. The +returned value is the temperature in degrees fahrenheit:: + + int temperature; + ioctl(fd, WDIOC_GETTEMP, &temperature); + +Finally the SETOPTIONS ioctl can be used to control some aspects of +the cards operation:: + + int options = 0; + ioctl(fd, WDIOC_SETOPTIONS, &options); + +The following options are available: + + ================= ================================ + WDIOS_DISABLECARD Turn off the watchdog timer + WDIOS_ENABLECARD Turn on the watchdog timer + WDIOS_TEMPPANIC Kernel panic on temperature trip + ================= ================================ + +[FIXME -- better explanations] diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt deleted file mode 100644 index 0e62ba33b7fb..000000000000 --- a/Documentation/watchdog/watchdog-api.txt +++ /dev/null @@ -1,237 +0,0 @@ -Last reviewed: 10/05/2007 - - -The Linux Watchdog driver API. - -Copyright 2002 Christer Weingel - -Some parts of this document are copied verbatim from the sbc60xxwdt -driver which is (c) Copyright 2000 Jakob Oestergaard - -This document describes the state of the Linux 2.4.18 kernel. - -Introduction: - -A Watchdog Timer (WDT) is a hardware circuit that can reset the -computer system in case of a software fault. You probably knew that -already. - -Usually a userspace daemon will notify the kernel watchdog driver via the -/dev/watchdog special device file that userspace is still alive, at -regular intervals. When such a notification occurs, the driver will -usually tell the hardware watchdog that everything is in order, and -that the watchdog should wait for yet another little while to reset -the system. If userspace fails (RAM error, kernel bug, whatever), the -notifications cease to occur, and the hardware watchdog will reset the -system (causing a reboot) after the timeout occurs. - -The Linux watchdog API is a rather ad-hoc construction and different -drivers implement different, and sometimes incompatible, parts of it. -This file is an attempt to document the existing usage and allow -future driver writers to use it as a reference. - -The simplest API: - -All drivers support the basic mode of operation, where the watchdog -activates as soon as /dev/watchdog is opened and will reboot unless -the watchdog is pinged within a certain time, this time is called the -timeout or margin. The simplest way to ping the watchdog is to write -some data to the device. So a very simple watchdog daemon would look -like this source file: see samples/watchdog/watchdog-simple.c - -A more advanced driver could for example check that a HTTP server is -still responding before doing the write call to ping the watchdog. - -When the device is closed, the watchdog is disabled, unless the "Magic -Close" feature is supported (see below). This is not always such a -good idea, since if there is a bug in the watchdog daemon and it -crashes the system will not reboot. Because of this, some of the -drivers support the configuration option "Disable watchdog shutdown on -close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling -the kernel, there is no way of disabling the watchdog once it has been -started. So, if the watchdog daemon crashes, the system will reboot -after the timeout has passed. Watchdog devices also usually support -the nowayout module parameter so that this option can be controlled at -runtime. - -Magic Close feature: - -If a driver supports "Magic Close", the driver will not disable the -watchdog unless a specific magic character 'V' has been sent to -/dev/watchdog just before closing the file. If the userspace daemon -closes the file without sending this special character, the driver -will assume that the daemon (and userspace in general) died, and will -stop pinging the watchdog without disabling it first. This will then -cause a reboot if the watchdog is not re-opened in sufficient time. - -The ioctl API: - -All conforming drivers also support an ioctl API. - -Pinging the watchdog using an ioctl: - -All drivers that have an ioctl interface support at least one ioctl, -KEEPALIVE. This ioctl does exactly the same thing as a write to the -watchdog device, so the main loop in the above program could be -replaced with: - - while (1) { - ioctl(fd, WDIOC_KEEPALIVE, 0); - sleep(10); - } - -the argument to the ioctl is ignored. - -Setting and getting the timeout: - -For some drivers it is possible to modify the watchdog timeout on the -fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT -flag set in their option field. The argument is an integer -representing the timeout in seconds. The driver returns the real -timeout used in the same variable, and this timeout might differ from -the requested one due to limitation of the hardware. - - int timeout = 45; - ioctl(fd, WDIOC_SETTIMEOUT, &timeout); - printf("The timeout was set to %d seconds\n", timeout); - -This example might actually print "The timeout was set to 60 seconds" -if the device has a granularity of minutes for its timeout. - -Starting with the Linux 2.4.18 kernel, it is possible to query the -current timeout using the GETTIMEOUT ioctl. - - ioctl(fd, WDIOC_GETTIMEOUT, &timeout); - printf("The timeout was is %d seconds\n", timeout); - -Pretimeouts: - -Some watchdog timers can be set to have a trigger go off before the -actual time they will reset the system. This can be done with an NMI, -interrupt, or other mechanism. This allows Linux to record useful -information (like panic information and kernel coredumps) before it -resets. - - pretimeout = 10; - ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout); - -Note that the pretimeout is the number of seconds before the time -when the timeout will go off. It is not the number of seconds until -the pretimeout. So, for instance, if you set the timeout to 60 seconds -and the pretimeout to 10 seconds, the pretimeout will go off in 50 -seconds. Setting a pretimeout to zero disables it. - -There is also a get function for getting the pretimeout: - - ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout); - printf("The pretimeout was is %d seconds\n", timeout); - -Not all watchdog drivers will support a pretimeout. - -Get the number of seconds before reboot: - -Some watchdog drivers have the ability to report the remaining time -before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl -that returns the number of seconds before reboot. - - ioctl(fd, WDIOC_GETTIMELEFT, &timeleft); - printf("The timeout was is %d seconds\n", timeleft); - -Environmental monitoring: - -All watchdog drivers are required return more information about the system, -some do temperature, fan and power level monitoring, some can tell you -the reason for the last reboot of the system. The GETSUPPORT ioctl is -available to ask what the device can do: - - struct watchdog_info ident; - ioctl(fd, WDIOC_GETSUPPORT, &ident); - -the fields returned in the ident struct are: - - identity a string identifying the watchdog driver - firmware_version the firmware version of the card if available - options a flags describing what the device supports - -the options field can have the following bits set, and describes what -kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can -return. [FIXME -- Is this correct?] - - WDIOF_OVERHEAT Reset due to CPU overheat - -The machine was last rebooted by the watchdog because the thermal limit was -exceeded - - WDIOF_FANFAULT Fan failed - -A system fan monitored by the watchdog card has failed - - WDIOF_EXTERN1 External relay 1 - -External monitoring relay/source 1 was triggered. Controllers intended for -real world applications include external monitoring pins that will trigger -a reset. - - WDIOF_EXTERN2 External relay 2 - -External monitoring relay/source 2 was triggered - - WDIOF_POWERUNDER Power bad/power fault - -The machine is showing an undervoltage status - - WDIOF_CARDRESET Card previously reset the CPU - -The last reboot was caused by the watchdog card - - WDIOF_POWEROVER Power over voltage - -The machine is showing an overvoltage status. Note that if one level is -under and one over both bits will be set - this may seem odd but makes -sense. - - WDIOF_KEEPALIVEPING Keep alive ping reply - -The watchdog saw a keepalive ping since it was last queried. - - WDIOF_SETTIMEOUT Can set/get the timeout - -The watchdog can do pretimeouts. - - WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set - - -For those drivers that return any bits set in the option field, the -GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current -status, and the status at the last reboot, respectively. - - int flags; - ioctl(fd, WDIOC_GETSTATUS, &flags); - - or - - ioctl(fd, WDIOC_GETBOOTSTATUS, &flags); - -Note that not all devices support these two calls, and some only -support the GETBOOTSTATUS call. - -Some drivers can measure the temperature using the GETTEMP ioctl. The -returned value is the temperature in degrees fahrenheit. - - int temperature; - ioctl(fd, WDIOC_GETTEMP, &temperature); - -Finally the SETOPTIONS ioctl can be used to control some aspects of -the cards operation. - - int options = 0; - ioctl(fd, WDIOC_SETOPTIONS, &options); - -The following options are available: - - WDIOS_DISABLECARD Turn off the watchdog timer - WDIOS_ENABLECARD Turn on the watchdog timer - WDIOS_TEMPPANIC Kernel panic on temperature trip - -[FIXME -- better explanations] - diff --git a/Documentation/watchdog/watchdog-kernel-api.rst b/Documentation/watchdog/watchdog-kernel-api.rst new file mode 100644 index 000000000000..864edbe932c1 --- /dev/null +++ b/Documentation/watchdog/watchdog-kernel-api.rst @@ -0,0 +1,338 @@ +=============================================== +The Linux WatchDog Timer Driver Core kernel API +=============================================== + +Last reviewed: 12-Feb-2013 + +Wim Van Sebroeck + +Introduction +------------ +This document does not describe what a WatchDog Timer (WDT) Driver or Device is. +It also does not describe the API which can be used by user space to communicate +with a WatchDog Timer. If you want to know this then please read the following +file: Documentation/watchdog/watchdog-api.rst . + +So what does this document describe? It describes the API that can be used by +WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core +Framework. This framework provides all interfacing towards user space so that +the same code does not have to be reproduced each time. This also means that +a watchdog timer driver then only needs to provide the different routines +(operations) that control the watchdog timer (WDT). + +The API +------- +Each watchdog timer driver that wants to use the WatchDog Timer Driver Core +must #include (you would have to do this anyway when +writing a watchdog device driver). This include file contains following +register/unregister routines:: + + extern int watchdog_register_device(struct watchdog_device *); + extern void watchdog_unregister_device(struct watchdog_device *); + +The watchdog_register_device routine registers a watchdog timer device. +The parameter of this routine is a pointer to a watchdog_device structure. +This routine returns zero on success and a negative errno code for failure. + +The watchdog_unregister_device routine deregisters a registered watchdog timer +device. The parameter of this routine is the pointer to the registered +watchdog_device structure. + +The watchdog subsystem includes an registration deferral mechanism, +which allows you to register an watchdog as early as you wish during +the boot process. + +The watchdog device structure looks like this:: + + struct watchdog_device { + int id; + struct device *parent; + const struct attribute_group **groups; + const struct watchdog_info *info; + const struct watchdog_ops *ops; + const struct watchdog_governor *gov; + unsigned int bootstatus; + unsigned int timeout; + unsigned int pretimeout; + unsigned int min_timeout; + unsigned int max_timeout; + unsigned int min_hw_heartbeat_ms; + unsigned int max_hw_heartbeat_ms; + struct notifier_block reboot_nb; + struct notifier_block restart_nb; + void *driver_data; + struct watchdog_core_data *wd_data; + unsigned long status; + struct list_head deferred; + }; + +It contains following fields: + +* id: set by watchdog_register_device, id 0 is special. It has both a + /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old + /dev/watchdog miscdev. The id is set automatically when calling + watchdog_register_device. +* parent: set this to the parent device (or NULL) before calling + watchdog_register_device. +* groups: List of sysfs attribute groups to create when creating the watchdog + device. +* info: a pointer to a watchdog_info structure. This structure gives some + additional information about the watchdog timer itself. (Like it's unique name) +* ops: a pointer to the list of watchdog operations that the watchdog supports. +* gov: a pointer to the assigned watchdog device pretimeout governor or NULL. +* timeout: the watchdog timer's timeout value (in seconds). + This is the time after which the system will reboot if user space does + not send a heartbeat request if WDOG_ACTIVE is set. +* pretimeout: the watchdog timer's pretimeout value (in seconds). +* min_timeout: the watchdog timer's minimum timeout value (in seconds). + If set, the minimum configurable value for 'timeout'. +* max_timeout: the watchdog timer's maximum timeout value (in seconds), + as seen from userspace. If set, the maximum configurable value for + 'timeout'. Not used if max_hw_heartbeat_ms is non-zero. +* min_hw_heartbeat_ms: Hardware limit for minimum time between heartbeats, + in milli-seconds. This value is normally 0; it should only be provided + if the hardware can not tolerate lower intervals between heartbeats. +* max_hw_heartbeat_ms: Maximum hardware heartbeat, in milli-seconds. + If set, the infrastructure will send heartbeats to the watchdog driver + if 'timeout' is larger than max_hw_heartbeat_ms, unless WDOG_ACTIVE + is set and userspace failed to send a heartbeat for at least 'timeout' + seconds. max_hw_heartbeat_ms must be set if a driver does not implement + the stop function. +* reboot_nb: notifier block that is registered for reboot notifications, for + internal use only. If the driver calls watchdog_stop_on_reboot, watchdog core + will stop the watchdog on such notifications. +* restart_nb: notifier block that is registered for machine restart, for + internal use only. If a watchdog is capable of restarting the machine, it + should define ops->restart. Priority can be changed through + watchdog_set_restart_priority. +* bootstatus: status of the device after booting (reported with watchdog + WDIOF_* status bits). +* driver_data: a pointer to the drivers private data of a watchdog device. + This data should only be accessed via the watchdog_set_drvdata and + watchdog_get_drvdata routines. +* wd_data: a pointer to watchdog core internal data. +* status: this field contains a number of status bits that give extra + information about the status of the device (Like: is the watchdog timer + running/active, or is the nowayout bit set). +* deferred: entry in wtd_deferred_reg_list which is used to + register early initialized watchdogs. + +The list of watchdog operations is defined as:: + + struct watchdog_ops { + struct module *owner; + /* mandatory operations */ + int (*start)(struct watchdog_device *); + int (*stop)(struct watchdog_device *); + /* optional operations */ + int (*ping)(struct watchdog_device *); + unsigned int (*status)(struct watchdog_device *); + int (*set_timeout)(struct watchdog_device *, unsigned int); + int (*set_pretimeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); + int (*restart)(struct watchdog_device *); + long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); + }; + +It is important that you first define the module owner of the watchdog timer +driver's operations. This module owner will be used to lock the module when +the watchdog is active. (This to avoid a system crash when you unload the +module and /dev/watchdog is still open). + +Some operations are mandatory and some are optional. The mandatory operations +are: + +* start: this is a pointer to the routine that starts the watchdog timer + device. + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + +Not all watchdog timer hardware supports the same functionality. That's why +all other routines/operations are optional. They only need to be provided if +they are supported. These optional routines/operations are: + +* stop: with this routine the watchdog timer device is being stopped. + + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + Some watchdog timer hardware can only be started and not be stopped. A + driver supporting such hardware does not have to implement the stop routine. + + If a driver has no stop function, the watchdog core will set WDOG_HW_RUNNING + and start calling the driver's keepalive pings function after the watchdog + device is closed. + + If a watchdog driver does not implement the stop function, it must set + max_hw_heartbeat_ms. +* ping: this is the routine that sends a keepalive ping to the watchdog timer + hardware. + + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + + Most hardware that does not support this as a separate function uses the + start function to restart the watchdog timer hardware. And that's also what + the watchdog timer driver core does: to send a keepalive ping to the watchdog + timer hardware it will either use the ping operation (when available) or the + start operation (when the ping operation is not available). + + (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the + WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's + info structure). +* status: this routine checks the status of the watchdog timer device. The + status of the device is reported with watchdog WDIOF_* status flags/bits. + + WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING are reported by the watchdog core; + it is not necessary to report those bits from the driver. Also, if no status + function is provided by the driver, the watchdog core reports the status bits + provided in the bootstatus variable of struct watchdog_device. + +* set_timeout: this routine checks and changes the timeout of the watchdog + timer device. It returns 0 on success, -EINVAL for "parameter out of range" + and -EIO for "could not write value to the watchdog". On success this + routine should set the timeout value of the watchdog_device to the + achieved timeout value (which may be different from the requested one + because the watchdog does not necessarily have a 1 second resolution). + + Drivers implementing max_hw_heartbeat_ms set the hardware watchdog heartbeat + to the minimum of timeout and max_hw_heartbeat_ms. Those drivers set the + timeout value of the watchdog_device either to the requested timeout value + (if it is larger than max_hw_heartbeat_ms), or to the achieved timeout value. + (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the + watchdog's info structure). + + If the watchdog driver does not have to perform any action but setting the + watchdog_device.timeout, this callback can be omitted. + + If set_timeout is not provided but, WDIOF_SETTIMEOUT is set, the watchdog + infrastructure updates the timeout value of the watchdog_device internally + to the requested value. + + If the pretimeout feature is used (WDIOF_PRETIMEOUT), then set_timeout must + also take care of checking if pretimeout is still valid and set up the timer + accordingly. This can't be done in the core without races, so it is the + duty of the driver. +* set_pretimeout: this routine checks and changes the pretimeout value of + the watchdog. It is optional because not all watchdogs support pretimeout + notification. The timeout value is not an absolute time, but the number of + seconds before the actual timeout would happen. It returns 0 on success, + -EINVAL for "parameter out of range" and -EIO for "could not write value to + the watchdog". A value of 0 disables pretimeout notification. + + (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the + watchdog's info structure). + + If the watchdog driver does not have to perform any action but setting the + watchdog_device.pretimeout, this callback can be omitted. That means if + set_pretimeout is not provided but WDIOF_PRETIMEOUT is set, the watchdog + infrastructure updates the pretimeout value of the watchdog_device internally + to the requested value. + +* get_timeleft: this routines returns the time that's left before a reset. +* restart: this routine restarts the machine. It returns 0 on success or a + negative errno code for failure. +* ioctl: if this routine is present then it will be called first before we do + our own internal ioctl call handling. This routine should return -ENOIOCTLCMD + if a command is not supported. The parameters that are passed to the ioctl + call are: watchdog_device, cmd and arg. + +The status bits should (preferably) be set with the set_bit and clear_bit alike +bit-operations. The status bits that are defined are: + +* WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device + is active or not from user perspective. User space is expected to send + heartbeat requests to the driver while this flag is set. +* WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. + If this bit is set then the watchdog timer will not be able to stop. +* WDOG_HW_RUNNING: Set by the watchdog driver if the hardware watchdog is + running. The bit must be set if the watchdog timer hardware can not be + stopped. The bit may also be set if the watchdog timer is running after + booting, before the watchdog device is opened. If set, the watchdog + infrastructure will send keepalives to the watchdog hardware while + WDOG_ACTIVE is not set. + Note: when you register the watchdog timer device with this bit set, + then opening /dev/watchdog will skip the start operation but send a keepalive + request instead. + + To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog + timer device) you can either: + + * set it statically in your watchdog_device struct with + + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, + + (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or + * use the following helper function:: + + static inline void watchdog_set_nowayout(struct watchdog_device *wdd, + int nowayout) + +Note: + The WatchDog Timer Driver Core supports the magic close feature and + the nowayout feature. To use the magic close feature you must set the + WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. + +The nowayout feature will overrule the magic close feature. + +To get or set driver specific data the following two helper functions should be +used:: + + static inline void watchdog_set_drvdata(struct watchdog_device *wdd, + void *data) + static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) + +The watchdog_set_drvdata function allows you to add driver specific data. The +arguments of this function are the watchdog device where you want to add the +driver specific data to and a pointer to the data itself. + +The watchdog_get_drvdata function allows you to retrieve driver specific data. +The argument of this function is the watchdog device where you want to retrieve +data from. The function returns the pointer to the driver specific data. + +To initialize the timeout field, the following function can be used:: + + extern int watchdog_init_timeout(struct watchdog_device *wdd, + unsigned int timeout_parm, + struct device *dev); + +The watchdog_init_timeout function allows you to initialize the timeout field +using the module timeout parameter or by retrieving the timeout-sec property from +the device tree (if the module timeout parameter is invalid). Best practice is +to set the default timeout value as timeout value in the watchdog_device and +then use this function to set the user "preferred" timeout value. +This routine returns zero on success and a negative errno code for failure. + +To disable the watchdog on reboot, the user must call the following helper:: + + static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); + +To disable the watchdog when unregistering the watchdog, the user must call +the following helper. Note that this will only stop the watchdog if the +nowayout flag is not set. + +:: + + static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); + +To change the priority of the restart handler the following helper should be +used:: + + void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority); + +User should follow the following guidelines for setting the priority: + +* 0: should be called in last resort, has limited restart capabilities +* 128: default restart handler, use if no other handler is expected to be + available, and/or if restart is sufficient to restart the entire system +* 255: highest priority, will preempt all other restart handlers + +To raise a pretimeout notification, the following function should be used:: + + void watchdog_notify_pretimeout(struct watchdog_device *wdd) + +The function can be called in the interrupt context. If watchdog pretimeout +governor framework (kbuild CONFIG_WATCHDOG_PRETIMEOUT_GOV symbol) is enabled, +an action is taken by a preconfigured pretimeout governor preassigned to +the watchdog device. If watchdog pretimeout governor framework is not +enabled, watchdog_notify_pretimeout() prints a notification message to +the kernel log buffer. diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt deleted file mode 100644 index 3a91ef5af044..000000000000 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ /dev/null @@ -1,305 +0,0 @@ -The Linux WatchDog Timer Driver Core kernel API. -=============================================== -Last reviewed: 12-Feb-2013 - -Wim Van Sebroeck - -Introduction ------------- -This document does not describe what a WatchDog Timer (WDT) Driver or Device is. -It also does not describe the API which can be used by user space to communicate -with a WatchDog Timer. If you want to know this then please read the following -file: Documentation/watchdog/watchdog-api.txt . - -So what does this document describe? It describes the API that can be used by -WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core -Framework. This framework provides all interfacing towards user space so that -the same code does not have to be reproduced each time. This also means that -a watchdog timer driver then only needs to provide the different routines -(operations) that control the watchdog timer (WDT). - -The API -------- -Each watchdog timer driver that wants to use the WatchDog Timer Driver Core -must #include (you would have to do this anyway when -writing a watchdog device driver). This include file contains following -register/unregister routines: - -extern int watchdog_register_device(struct watchdog_device *); -extern void watchdog_unregister_device(struct watchdog_device *); - -The watchdog_register_device routine registers a watchdog timer device. -The parameter of this routine is a pointer to a watchdog_device structure. -This routine returns zero on success and a negative errno code for failure. - -The watchdog_unregister_device routine deregisters a registered watchdog timer -device. The parameter of this routine is the pointer to the registered -watchdog_device structure. - -The watchdog subsystem includes an registration deferral mechanism, -which allows you to register an watchdog as early as you wish during -the boot process. - -The watchdog device structure looks like this: - -struct watchdog_device { - int id; - struct device *parent; - const struct attribute_group **groups; - const struct watchdog_info *info; - const struct watchdog_ops *ops; - const struct watchdog_governor *gov; - unsigned int bootstatus; - unsigned int timeout; - unsigned int pretimeout; - unsigned int min_timeout; - unsigned int max_timeout; - unsigned int min_hw_heartbeat_ms; - unsigned int max_hw_heartbeat_ms; - struct notifier_block reboot_nb; - struct notifier_block restart_nb; - void *driver_data; - struct watchdog_core_data *wd_data; - unsigned long status; - struct list_head deferred; -}; - -It contains following fields: -* id: set by watchdog_register_device, id 0 is special. It has both a - /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old - /dev/watchdog miscdev. The id is set automatically when calling - watchdog_register_device. -* parent: set this to the parent device (or NULL) before calling - watchdog_register_device. -* groups: List of sysfs attribute groups to create when creating the watchdog - device. -* info: a pointer to a watchdog_info structure. This structure gives some - additional information about the watchdog timer itself. (Like it's unique name) -* ops: a pointer to the list of watchdog operations that the watchdog supports. -* gov: a pointer to the assigned watchdog device pretimeout governor or NULL. -* timeout: the watchdog timer's timeout value (in seconds). - This is the time after which the system will reboot if user space does - not send a heartbeat request if WDOG_ACTIVE is set. -* pretimeout: the watchdog timer's pretimeout value (in seconds). -* min_timeout: the watchdog timer's minimum timeout value (in seconds). - If set, the minimum configurable value for 'timeout'. -* max_timeout: the watchdog timer's maximum timeout value (in seconds), - as seen from userspace. If set, the maximum configurable value for - 'timeout'. Not used if max_hw_heartbeat_ms is non-zero. -* min_hw_heartbeat_ms: Hardware limit for minimum time between heartbeats, - in milli-seconds. This value is normally 0; it should only be provided - if the hardware can not tolerate lower intervals between heartbeats. -* max_hw_heartbeat_ms: Maximum hardware heartbeat, in milli-seconds. - If set, the infrastructure will send heartbeats to the watchdog driver - if 'timeout' is larger than max_hw_heartbeat_ms, unless WDOG_ACTIVE - is set and userspace failed to send a heartbeat for at least 'timeout' - seconds. max_hw_heartbeat_ms must be set if a driver does not implement - the stop function. -* reboot_nb: notifier block that is registered for reboot notifications, for - internal use only. If the driver calls watchdog_stop_on_reboot, watchdog core - will stop the watchdog on such notifications. -* restart_nb: notifier block that is registered for machine restart, for - internal use only. If a watchdog is capable of restarting the machine, it - should define ops->restart. Priority can be changed through - watchdog_set_restart_priority. -* bootstatus: status of the device after booting (reported with watchdog - WDIOF_* status bits). -* driver_data: a pointer to the drivers private data of a watchdog device. - This data should only be accessed via the watchdog_set_drvdata and - watchdog_get_drvdata routines. -* wd_data: a pointer to watchdog core internal data. -* status: this field contains a number of status bits that give extra - information about the status of the device (Like: is the watchdog timer - running/active, or is the nowayout bit set). -* deferred: entry in wtd_deferred_reg_list which is used to - register early initialized watchdogs. - -The list of watchdog operations is defined as: - -struct watchdog_ops { - struct module *owner; - /* mandatory operations */ - int (*start)(struct watchdog_device *); - int (*stop)(struct watchdog_device *); - /* optional operations */ - int (*ping)(struct watchdog_device *); - unsigned int (*status)(struct watchdog_device *); - int (*set_timeout)(struct watchdog_device *, unsigned int); - int (*set_pretimeout)(struct watchdog_device *, unsigned int); - unsigned int (*get_timeleft)(struct watchdog_device *); - int (*restart)(struct watchdog_device *); - long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); -}; - -It is important that you first define the module owner of the watchdog timer -driver's operations. This module owner will be used to lock the module when -the watchdog is active. (This to avoid a system crash when you unload the -module and /dev/watchdog is still open). - -Some operations are mandatory and some are optional. The mandatory operations -are: -* start: this is a pointer to the routine that starts the watchdog timer - device. - The routine needs a pointer to the watchdog timer device structure as a - parameter. It returns zero on success or a negative errno code for failure. - -Not all watchdog timer hardware supports the same functionality. That's why -all other routines/operations are optional. They only need to be provided if -they are supported. These optional routines/operations are: -* stop: with this routine the watchdog timer device is being stopped. - The routine needs a pointer to the watchdog timer device structure as a - parameter. It returns zero on success or a negative errno code for failure. - Some watchdog timer hardware can only be started and not be stopped. A - driver supporting such hardware does not have to implement the stop routine. - If a driver has no stop function, the watchdog core will set WDOG_HW_RUNNING - and start calling the driver's keepalive pings function after the watchdog - device is closed. - If a watchdog driver does not implement the stop function, it must set - max_hw_heartbeat_ms. -* ping: this is the routine that sends a keepalive ping to the watchdog timer - hardware. - The routine needs a pointer to the watchdog timer device structure as a - parameter. It returns zero on success or a negative errno code for failure. - Most hardware that does not support this as a separate function uses the - start function to restart the watchdog timer hardware. And that's also what - the watchdog timer driver core does: to send a keepalive ping to the watchdog - timer hardware it will either use the ping operation (when available) or the - start operation (when the ping operation is not available). - (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the - WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's - info structure). -* status: this routine checks the status of the watchdog timer device. The - status of the device is reported with watchdog WDIOF_* status flags/bits. - WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING are reported by the watchdog core; - it is not necessary to report those bits from the driver. Also, if no status - function is provided by the driver, the watchdog core reports the status bits - provided in the bootstatus variable of struct watchdog_device. -* set_timeout: this routine checks and changes the timeout of the watchdog - timer device. It returns 0 on success, -EINVAL for "parameter out of range" - and -EIO for "could not write value to the watchdog". On success this - routine should set the timeout value of the watchdog_device to the - achieved timeout value (which may be different from the requested one - because the watchdog does not necessarily have a 1 second resolution). - Drivers implementing max_hw_heartbeat_ms set the hardware watchdog heartbeat - to the minimum of timeout and max_hw_heartbeat_ms. Those drivers set the - timeout value of the watchdog_device either to the requested timeout value - (if it is larger than max_hw_heartbeat_ms), or to the achieved timeout value. - (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the - watchdog's info structure). - If the watchdog driver does not have to perform any action but setting the - watchdog_device.timeout, this callback can be omitted. - If set_timeout is not provided but, WDIOF_SETTIMEOUT is set, the watchdog - infrastructure updates the timeout value of the watchdog_device internally - to the requested value. - If the pretimeout feature is used (WDIOF_PRETIMEOUT), then set_timeout must - also take care of checking if pretimeout is still valid and set up the timer - accordingly. This can't be done in the core without races, so it is the - duty of the driver. -* set_pretimeout: this routine checks and changes the pretimeout value of - the watchdog. It is optional because not all watchdogs support pretimeout - notification. The timeout value is not an absolute time, but the number of - seconds before the actual timeout would happen. It returns 0 on success, - -EINVAL for "parameter out of range" and -EIO for "could not write value to - the watchdog". A value of 0 disables pretimeout notification. - (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the - watchdog's info structure). - If the watchdog driver does not have to perform any action but setting the - watchdog_device.pretimeout, this callback can be omitted. That means if - set_pretimeout is not provided but WDIOF_PRETIMEOUT is set, the watchdog - infrastructure updates the pretimeout value of the watchdog_device internally - to the requested value. -* get_timeleft: this routines returns the time that's left before a reset. -* restart: this routine restarts the machine. It returns 0 on success or a - negative errno code for failure. -* ioctl: if this routine is present then it will be called first before we do - our own internal ioctl call handling. This routine should return -ENOIOCTLCMD - if a command is not supported. The parameters that are passed to the ioctl - call are: watchdog_device, cmd and arg. - -The status bits should (preferably) be set with the set_bit and clear_bit alike -bit-operations. The status bits that are defined are: -* WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device - is active or not from user perspective. User space is expected to send - heartbeat requests to the driver while this flag is set. -* WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. - If this bit is set then the watchdog timer will not be able to stop. -* WDOG_HW_RUNNING: Set by the watchdog driver if the hardware watchdog is - running. The bit must be set if the watchdog timer hardware can not be - stopped. The bit may also be set if the watchdog timer is running after - booting, before the watchdog device is opened. If set, the watchdog - infrastructure will send keepalives to the watchdog hardware while - WDOG_ACTIVE is not set. - Note: when you register the watchdog timer device with this bit set, - then opening /dev/watchdog will skip the start operation but send a keepalive - request instead. - - To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog - timer device) you can either: - * set it statically in your watchdog_device struct with - .status = WATCHDOG_NOWAYOUT_INIT_STATUS, - (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or - * use the following helper function: - static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) - -Note: The WatchDog Timer Driver Core supports the magic close feature and -the nowayout feature. To use the magic close feature you must set the -WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. -The nowayout feature will overrule the magic close feature. - -To get or set driver specific data the following two helper functions should be -used: - -static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data) -static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) - -The watchdog_set_drvdata function allows you to add driver specific data. The -arguments of this function are the watchdog device where you want to add the -driver specific data to and a pointer to the data itself. - -The watchdog_get_drvdata function allows you to retrieve driver specific data. -The argument of this function is the watchdog device where you want to retrieve -data from. The function returns the pointer to the driver specific data. - -To initialize the timeout field, the following function can be used: - -extern int watchdog_init_timeout(struct watchdog_device *wdd, - unsigned int timeout_parm, struct device *dev); - -The watchdog_init_timeout function allows you to initialize the timeout field -using the module timeout parameter or by retrieving the timeout-sec property from -the device tree (if the module timeout parameter is invalid). Best practice is -to set the default timeout value as timeout value in the watchdog_device and -then use this function to set the user "preferred" timeout value. -This routine returns zero on success and a negative errno code for failure. - -To disable the watchdog on reboot, the user must call the following helper: - -static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); - -To disable the watchdog when unregistering the watchdog, the user must call -the following helper. Note that this will only stop the watchdog if the -nowayout flag is not set. - -static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); - -To change the priority of the restart handler the following helper should be -used: - -void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority); - -User should follow the following guidelines for setting the priority: -* 0: should be called in last resort, has limited restart capabilities -* 128: default restart handler, use if no other handler is expected to be - available, and/or if restart is sufficient to restart the entire system -* 255: highest priority, will preempt all other restart handlers - -To raise a pretimeout notification, the following function should be used: - -void watchdog_notify_pretimeout(struct watchdog_device *wdd) - -The function can be called in the interrupt context. If watchdog pretimeout -governor framework (kbuild CONFIG_WATCHDOG_PRETIMEOUT_GOV symbol) is enabled, -an action is taken by a preconfigured pretimeout governor preassigned to -the watchdog device. If watchdog pretimeout governor framework is not -enabled, watchdog_notify_pretimeout() prints a notification message to -the kernel log buffer. diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst new file mode 100644 index 000000000000..b121caae7798 --- /dev/null +++ b/Documentation/watchdog/watchdog-parameters.rst @@ -0,0 +1,736 @@ +========================== +WatchDog Module Parameters +========================== + +This file provides information on the module parameters of many of +the Linux watchdog drivers. Watchdog driver parameter specs should +be listed here unless the driver has its own driver-specific information +file. + +See Documentation/admin-guide/kernel-parameters.rst for information on +providing kernel parameters for builtin drivers versus loadable +modules. + +------------------------------------------------- + +acquirewdt: + wdt_stop: + Acquire WDT 'stop' io port (default 0x43) + wdt_start: + Acquire WDT 'start' io port (default 0x443) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +advantechwdt: + wdt_stop: + Advantech WDT 'stop' io port (default 0x443) + wdt_start: + Advantech WDT 'start' io port (default 0x443) + timeout: + Watchdog timeout in seconds. 1<= timeout <=63, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +alim1535_wdt: + timeout: + Watchdog timeout in seconds. (0 < timeout < 18000, default=60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +alim7101_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=30 + use_gpio: + Use the gpio watchdog (required by old cobalt boards). + default=0/off/no + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ar7_wdt: + margin: + Watchdog margin in seconds (default=60) + nowayout: + Disable watchdog shutdown on close + (default=kernel config parameter) + +------------------------------------------------- + +armada_37xx_wdt: + timeout: + Watchdog timeout in seconds. (default=120) + nowayout: + Disable watchdog shutdown on close + (default=kernel config parameter) + +------------------------------------------------- + +at91rm9200_wdt: + wdt_time: + Watchdog time in seconds. (default=5) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +at91sam9_wdt: + heartbeat: + Watchdog heartbeats in seconds. (default = 15) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +bcm47xx_wdt: + wdt_time: + Watchdog time in seconds. (default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +coh901327_wdt: + margin: + Watchdog margin in seconds (default 60s) + +------------------------------------------------- + +cpu5wdt: + port: + base address of watchdog card, default is 0x91 + verbose: + be verbose, default is 0 (no) + ticks: + count down ticks, default is 10000 + +------------------------------------------------- + +cpwd: + wd0_timeout: + Default watchdog0 timeout in 1/10secs + wd1_timeout: + Default watchdog1 timeout in 1/10secs + wd2_timeout: + Default watchdog2 timeout in 1/10secs + +------------------------------------------------- + +da9052wdt: + timeout: + Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +davinci_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 600, default 60 + +------------------------------------------------- + +ebc-c384_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=15300, default=60) + nowayout: + Watchdog cannot be stopped once started + +------------------------------------------------- + +ep93xx_wdt: + nowayout: + Watchdog cannot be stopped once started + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) + +------------------------------------------------- + +eurotechwdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + io: + Eurotech WDT io port (default=0x3f0) + irq: + Eurotech WDT irq (default=10) + ev: + Eurotech WDT event type (default is `int`) + +------------------------------------------------- + +gef_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +geodewdt: + timeout: + Watchdog timeout in seconds. 1<= timeout <=131, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +i6300esb: + heartbeat: + Watchdog heartbeat in seconds. (11 for debug, (default 0) + +------------------------------------------------- + +sa1100_wdt: + margin: + Watchdog margin in seconds (default 60s) + +------------------------------------------------- + +sb_wdog: + timeout: + Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) + +------------------------------------------------- + +sbc60xxwdt: + wdt_stop: + SBC60xx WDT 'stop' io port (default 0x45) + wdt_start: + SBC60xx WDT 'start' io port (default 0x443) + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc7240_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=255, default=30) + nowayout: + Disable watchdog when closing device file + +------------------------------------------------- + +sbc8360: + timeout: + Index into timeout table (0-63) (default=27 (60s)) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc_epx_c3: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc_fitpc2_wdt: + margin: + Watchdog margin in seconds (default 60s) + nowayout: + Watchdog cannot be stopped once started + +------------------------------------------------- + +sbsa_gwdt: + timeout: + Watchdog timeout in seconds. (default 10s) + action: + Watchdog action at the first stage timeout, + set to 0 to ignore, 1 to panic. (default=0) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sc1200wdt: + isapnp: + When set to 0 driver ISA PnP support will be disabled (default=1) + io: + io port + timeout: + range is 0-255 minutes, default is 1 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sc520_wdt: + timeout: + Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sch311x_wdt: + force_id: + Override the detected device ID + therm_trip: + Should a ThermTrip trigger the reset generator + timeout: + Watchdog timeout in seconds. 1<= timeout <=15300, default=60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +scx200_wdt: + margin: + Watchdog margin in seconds + nowayout: + Disable watchdog shutdown on close + +------------------------------------------------- + +shwdt: + clock_division_ratio: + Clock division ratio. Valid ranges are from 0x5 (1.31ms) + to 0x7 (5.25ms). (default=7) + heartbeat: + Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +smsc37b787_wdt: + timeout: + range is 1-255 units, default is 60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +softdog: + soft_margin: + Watchdog soft_margin in seconds. + (0 < soft_margin < 65536, default=60) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + soft_noboot: + Softdog action, set to 1 to ignore reboots, 0 to reboot + (default=0) + +------------------------------------------------- + +stmp3xxx_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 4194304, default 19 + +------------------------------------------------- + +tegra_wdt: + heartbeat: + Watchdog heartbeats in seconds. (default = 120) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ts72xx_wdt: + timeout: + Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) + nowayout: + Disable watchdog shutdown on close + +------------------------------------------------- + +twl4030_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +txx9wdt: + timeout: + Watchdog timeout in seconds. (01 for debug, (default 0) -------------------------------------------------- -sa1100_wdt: -margin: Watchdog margin in seconds (default 60s) -------------------------------------------------- -sb_wdog: -timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) -------------------------------------------------- -sbc60xxwdt: -wdt_stop: SBC60xx WDT 'stop' io port (default 0x45) -wdt_start: SBC60xx WDT 'start' io port (default 0x443) -timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sbc7240_wdt: -timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30) -nowayout: Disable watchdog when closing device file -------------------------------------------------- -sbc8360: -timeout: Index into timeout table (0-63) (default=27 (60s)) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sbc_epx_c3: -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sbc_fitpc2_wdt: -margin: Watchdog margin in seconds (default 60s) -nowayout: Watchdog cannot be stopped once started -------------------------------------------------- -sbsa_gwdt: -timeout: Watchdog timeout in seconds. (default 10s) -action: Watchdog action at the first stage timeout, - set to 0 to ignore, 1 to panic. (default=0) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sc1200wdt: -isapnp: When set to 0 driver ISA PnP support will be disabled (default=1) -io: io port -timeout: range is 0-255 minutes, default is 1 -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sc520_wdt: -timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -sch311x_wdt: -force_id: Override the detected device ID -therm_trip: Should a ThermTrip trigger the reset generator -timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60 -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -scx200_wdt: -margin: Watchdog margin in seconds -nowayout: Disable watchdog shutdown on close -------------------------------------------------- -shwdt: -clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms) - to 0x7 (5.25ms). (default=7) -heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -smsc37b787_wdt: -timeout: range is 1-255 units, default is 60 -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -softdog: -soft_margin: Watchdog soft_margin in seconds. - (0 < soft_margin < 65536, default=60) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot - (default=0) -------------------------------------------------- -stmp3xxx_wdt: -heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19 -------------------------------------------------- -tegra_wdt: -heartbeat: Watchdog heartbeats in seconds. (default = 120) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -ts72xx_wdt: -timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) -nowayout: Disable watchdog shutdown on close -------------------------------------------------- -twl4030_wdt: -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- -txx9wdt: -timeout: Watchdog timeout in seconds. (0 + +Introduction +------------ +This document states rules about watchdog devices and their power management +handling to ensure a uniform behaviour for Linux systems. + + +Ping on resume +-------------- +On resume, a watchdog timer shall be reset to its selected value to give +userspace enough time to resume. [1] [2] + +[1] https://patchwork.kernel.org/patch/10252209/ + +[2] https://patchwork.kernel.org/patch/10711625/ diff --git a/Documentation/watchdog/watchdog-pm.txt b/Documentation/watchdog/watchdog-pm.txt deleted file mode 100644 index 7a4dd46e0d24..000000000000 --- a/Documentation/watchdog/watchdog-pm.txt +++ /dev/null @@ -1,19 +0,0 @@ -The Linux WatchDog Timer Power Management Guide -=============================================== -Last reviewed: 17-Dec-2018 - -Wolfram Sang - -Introduction ------------- -This document states rules about watchdog devices and their power management -handling to ensure a uniform behaviour for Linux systems. - - -Ping on resume --------------- -On resume, a watchdog timer shall be reset to its selected value to give -userspace enough time to resume. [1] [2] - -[1] https://patchwork.kernel.org/patch/10252209/ -[2] https://patchwork.kernel.org/patch/10711625/ diff --git a/Documentation/watchdog/wdt.rst b/Documentation/watchdog/wdt.rst new file mode 100644 index 000000000000..d97b0361535b --- /dev/null +++ b/Documentation/watchdog/wdt.rst @@ -0,0 +1,63 @@ +============================================================ +WDT Watchdog Timer Interfaces For The Linux Operating System +============================================================ + +Last Reviewed: 10/05/2007 + +Alan Cox + + - ICS WDT501-P + - ICS WDT501-P (no fan tachometer) + - ICS WDT500-P + +All the interfaces provide /dev/watchdog, which when open must be written +to within a timeout or the machine will reboot. Each write delays the reboot +time another timeout. In the case of the software watchdog the ability to +reboot will depend on the state of the machines and interrupts. The hardware +boards physically pull the machine down off their own onboard timers and +will reboot from almost anything. + +A second temperature monitoring interface is available on the WDT501P cards. +This provides /dev/temperature. This is the machine internal temperature in +degrees Fahrenheit. Each read returns a single byte giving the temperature. + +The third interface logs kernel messages on additional alert events. + +The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to +pass IO address and IRQ boot parameters. E.g.:: + + wdt.io=0x240 wdt.irq=11 + +Other "wdt" driver parameters are: + + =========== ====================================================== + heartbeat Watchdog heartbeat in seconds (default 60) + nowayout Watchdog cannot be stopped once started (kernel + build parameter) + tachometer WDT501-P Fan Tachometer support (0=disable, default=0) + type WDT501-P Card type (500 or 501, default=500) + =========== ====================================================== + +Features +-------- + +================ ======= ======= + WDT501P WDT500P +================ ======= ======= +Reboot Timer X X +External Reboot X X +I/O Port Monitor o o +Temperature X o +Fan Speed X o +Power Under X o +Power Over X o +Overheat X o +================ ======= ======= + +The external event interfaces on the WDT boards are not currently supported. +Minor numbers are however allocated for it. + + +Example Watchdog Driver: + + see samples/watchdog/watchdog-simple.c diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.txt deleted file mode 100644 index ed2f0b860869..000000000000 --- a/Documentation/watchdog/wdt.txt +++ /dev/null @@ -1,50 +0,0 @@ -Last Reviewed: 10/05/2007 - - WDT Watchdog Timer Interfaces For The Linux Operating System - Alan Cox - - ICS WDT501-P - ICS WDT501-P (no fan tachometer) - ICS WDT500-P - -All the interfaces provide /dev/watchdog, which when open must be written -to within a timeout or the machine will reboot. Each write delays the reboot -time another timeout. In the case of the software watchdog the ability to -reboot will depend on the state of the machines and interrupts. The hardware -boards physically pull the machine down off their own onboard timers and -will reboot from almost anything. - -A second temperature monitoring interface is available on the WDT501P cards. -This provides /dev/temperature. This is the machine internal temperature in -degrees Fahrenheit. Each read returns a single byte giving the temperature. - -The third interface logs kernel messages on additional alert events. - -The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to -pass IO address and IRQ boot parameters. E.g.: - wdt.io=0x240 wdt.irq=11 - -Other "wdt" driver parameters are: - heartbeat Watchdog heartbeat in seconds (default 60) - nowayout Watchdog cannot be stopped once started (kernel - build parameter) - tachometer WDT501-P Fan Tachometer support (0=disable, default=0) - type WDT501-P Card type (500 or 501, default=500) - -Features --------- - WDT501P WDT500P -Reboot Timer X X -External Reboot X X -I/O Port Monitor o o -Temperature X o -Fan Speed X o -Power Under X o -Power Over X o -Overheat X o - -The external event interfaces on the WDT boards are not currently supported. -Minor numbers are however allocated for it. - - -Example Watchdog Driver: see samples/watchdog/watchdog-simple.c diff --git a/MAINTAINERS b/MAINTAINERS index 0db7f12439f7..ab7949a7782f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7009,7 +7009,7 @@ F: drivers/media/usb/hdpvr/ HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER M: Jerry Hoemann S: Supported -F: Documentation/watchdog/hpwdt.txt +F: Documentation/watchdog/hpwdt.rst F: drivers/watchdog/hpwdt.c HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index ffe754539f5a..6cad0b33d7ad 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -18,7 +18,7 @@ menuconfig WATCHDOG reboot the machine) and a driver for hardware watchdog boards, which are more robust and can also keep track of the temperature inside your computer. For details, read - in the kernel source. + in the kernel source. The watchdog is usually used together with the watchdog daemon which is available from @@ -1870,7 +1870,7 @@ config BOOKE_WDT Watchdog driver for PowerPC Book-E chips, such as the Freescale MPC85xx SOCs and the IBM PowerPC 440. - Please see Documentation/watchdog/watchdog-api.txt for + Please see Documentation/watchdog/watchdog-api.rst for more information. config BOOKE_WDT_DEFAULT_TIMEOUT @@ -2019,7 +2019,7 @@ config PCWATCHDOG This card simply watches your kernel to make sure it doesn't freeze, and if it does, it reboots your computer after a certain amount of time. This driver is like the WDT501 driver but for different - hardware. Please read . The PC + hardware. Please read . The PC watchdog cards can be ordered from . To compile this driver as a module, choose M here: the diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 13c817ea1d6a..f5713030d0f7 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -36,7 +36,7 @@ * mknod /dev/watchdog c 10 130 * * For an example userspace keep-alive daemon, see: - * Documentation/watchdog/wdt.txt + * Documentation/watchdog/wdt.rst */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt