From: John Crispin Date: Mon, 3 Nov 2014 20:20:40 +0000 (+0000) Subject: ralink: fix wan port on whr-1166 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cc142739f2a6d447ab107fb3d12293fe8a76b8fc;p=openwrt%2Fstaging%2Fstintel.git ralink: fix wan port on whr-1166 Signed-off-by: John Crispin SVN-Revision: 43171 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index cedcb8bdcd..52e27c5321 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -119,13 +119,18 @@ ramips_setup_interfaces() mzk-750dhp | \ whr-300hp2 | \ whr-600d | \ - whr-1166d | \ wt1520) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" ucidef_add_switch_vlan "switch0" "2" "4 6t" ;; + whr-1166d) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" + ucidef_add_switch_vlan "switch0" "2" "5 6t" + ;; awm002-evb | \ awm003-evb | \ diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts index 236987c721..1b5a3d712f 100644 --- a/target/linux/ramips/dts/WHR-1166D.dts +++ b/target/linux/ramips/dts/WHR-1166D.dts @@ -56,7 +56,7 @@ pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,group = "i2c", "uartf", "rgmii1", "wled", "nd_sd"; ralink,function = "gpio"; }; }; @@ -64,9 +64,22 @@ ethernet@10100000 { pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - ralink,port-map = "llllw"; + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; }; gsw@10110000 {