From: Luka Perkov Date: Wed, 25 Sep 2013 17:55:38 +0000 (+0000) Subject: imx6: update gw5400-a dts cleanup X-Git-Tag: reboot~9131 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cbcd3024dce4c7df45f5374be0ed534bcbeb1fd4;p=openwrt%2Fstaging%2Fchunkeey.git imx6: update gw5400-a dts cleanup - remove dead code - alphabatize Signed-off-by: Tim Harvey SVN-Revision: 38184 --- diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts index f7ed236ebf..d4c426c6d9 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -20,44 +20,38 @@ aliases { ethernet0 = &fec; ethernet1 = ð1; - sky2 = ð1; - ssi0 = &ssi1; - ssi1 = &ssi2; - ipu0 = &ipu1; - ipu1 = &ipu2; - usdhc0 = &usdhc1; - usdhc1 = &usdhc2; - usdhc2 = &usdhc3; - usdhc3 = &usdhc4; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; - usb0 = &usbh3; - usb1 = &usbotg; + ipu0 = &ipu1; + ipu1 = &ipu2; + led0 = &led0; + led1 = &led1; + led2 = &led2; + pwm0 = &pwm1; + pwm1 = &pwm2; + pwm2 = &pwm3; + pwm3 = &pwm4; + sky2 = ð1; + ssi0 = &ssi1; + ssi1 = &ssi2; spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; spi3 = &ecspi4; spi4 = &ecspi5; - pwm0 = &pwm1; - pwm1 = &pwm2; - pwm2 = &pwm3; - pwm3 = &pwm4; - can0 = &can1; - led0 = &led0; - led1 = &led1; - led2 = &led2; + usb0 = &usbh3; + usb1 = &usbotg; + usdhc0 = &usdhc1; + usdhc1 = &usdhc2; + usdhc2 = &usdhc3; + usdhc3 = &usdhc4; }; - /* SDRAM addressing */ memory { reg = <0x10000000 0x40000000>; }; - chosen { - bootargs = "console=ttymxc1,115200"; - }; - leds { compatible = "gpio-leds"; @@ -125,109 +119,10 @@ }; }; -&iomuxc { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user0 led */ - MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user2 led */ -/* let bootloader choose these based on hwconfig */ -#if 0 - MX6Q_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* MX6_DIO0 (or PWM1_PWM0) */ - MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x80000000 /* MX6_DIO1 (or PWM2_PWM0) */ - MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* MX6_DIO2 (or PWM3_PWM0) */ - MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x80000000 /* MX6_DIO3 (or PWM3_PWM0) */ -#endif - MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x08000000 /* PCIE RST */ - MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 /* AUD4_MCK */ - >; - }; - }; - -#if 0 - /* ipu1: IPU1_CSI0: HDMI reciver (Digital Video In) */ - ipu1 { - pinctrl_ipu1_1: ipu1grp-5 { - fsl,pins = < - MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC - MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN - MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK - MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC - MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 - MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 - MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 - MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 - MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 - MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 - MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 - MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 - MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 - MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 - MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 - MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 - MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 - MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 - MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 - MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 - >; - }; - }; - - /* ipu2: IPU1_CSI1: Analog Video Decoder (Analog Video In) */ - /* IPU2_CSI1: Analog Video Decoder (Analog Video In) */ - ipu2 { - pinctrl_ipu2_1: ipu2grp-1 { - fsl,pins = < - MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12 - MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13 - MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14 - MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15 - MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16 - MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17 - MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18 - MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19 - - MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC - MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC -// not sure why this causes kernel to crash in early init -// MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK - >; - }; - }; - - /* ipu3: IPU2_DISP0: Analog Video Encoder (Analog Video Out) */ - ipu3 { - pinctrl_ipu3_1: ipu3grp-5 { - fsl,pins = < - MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 - MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 - MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 - MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 - MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 - MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 - MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 - MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 - MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 - MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 - MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 - MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 - MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 - MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 - MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 - MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 - >; - }; - }; -#endif + pinctrl-0 = <&pinctrl_audmux_3>; + status = "okay"; }; &ecspi1 { @@ -244,61 +139,6 @@ }; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - status = "okay"; -}; - -&uart5 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&ssi2 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&can1 { - reg = <0x02090000 0x4000>; - interrupts = <0 110 0x04>; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; @@ -307,20 +147,6 @@ status = "okay"; }; -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_3>; - status = "okay"; -}; - &i2c1 { status = "okay"; clock-frequency = <100000>; @@ -438,6 +264,28 @@ }; }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ + MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ + MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ + MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ + MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ + MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 /* AUD4_MCK */ + >; + }; + }; +}; + &ldb { status = "okay"; lvds-channel@0 { @@ -445,6 +293,54 @@ }; }; -&sata { +&pcie { + reset-gpio = <&gpio1 29 0>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + status = "okay"; +}; + +&uart5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + vmmc-supply = <®_3p3v>; status = "okay"; };