From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 10 Jan 2013 06:58:43 +0000 (+0000)
Subject: net: ethernet: xilinx: Do not use NO_IRQ in axienet
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cb59c87dbc8be2ffa692c50bd22f89025ba7a342;p=openwrt%2Fstaging%2Fblogic.git

net: ethernet: xilinx: Do not use NO_IRQ in axienet

This driver is used on Microblaze and will be used
on Arm Zynq.
Microblaze doesn't define NO_IRQ and no IRQ is 0.
Arm still uses NO_IRQ as -1 and there is no option
to connect IRQ to irq 0.

That's why <= 0 is only one option how to find out
undefined IRQ.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index d9f69b82cc4f..6f47100e58d7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1590,7 +1590,7 @@ static int axienet_of_probe(struct platform_device *op)
 	lp->rx_irq = irq_of_parse_and_map(np, 1);
 	lp->tx_irq = irq_of_parse_and_map(np, 0);
 	of_node_put(np);
-	if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
+	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
 		dev_err(&op->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
 		goto err_iounmap_2;