From: Paul Spooren Date: Fri, 1 Oct 2021 21:25:57 +0000 (-1000) Subject: gemini: remove obsolete Kernel 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=cac2ca1d4300a52f5d1d4ef603f0cdcc62c1e2e2;p=openwrt%2Fstaging%2Fthess.git gemini: remove obsolete Kernel 5.4 With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren --- diff --git a/target/linux/gemini/config-5.4 b/target/linux/gemini/config-5.4 deleted file mode 100644 index fcb482aed7..0000000000 --- a/target/linux/gemini/config-5.4 +++ /dev/null @@ -1,461 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_AMBA_PL08X=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_GEMINI=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MOXART is not set -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V4=y -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -# CONFIG_ARCH_MULTI_V5 is not set -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_UNWIND=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BOUNCE=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMA=y -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_SIZE_MBYTES=16 -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_GEMINI=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_FA=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FA=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -CONFIG_CPU_FA526=y -CONFIG_CPU_NO_EFFICIENT_FFS=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_TLB_FA=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRASH_CORE=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRC_CCITT=y -CONFIG_CRC_ITU_T=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_CMAC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ECHAINIV=y -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DMADEVICES=y -CONFIG_DMATEST=y -CONFIG_DMA_CMA=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DRM=y -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_PANEL=y -CONFIG_DRM_PANEL_BRIDGE=y -CONFIG_DRM_PANEL_ILITEK_IL9322=y -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y -CONFIG_DRM_TVE200=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_93CX6=y -CONFIG_ELF_CORE=y -# CONFIG_EMBEDDED is not set -# CONFIG_EXPERT is not set -CONFIG_EXT4_FS=y -CONFIG_FARADAY_FTINTC010=y -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FHANDLE=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FPE_FASTFPE is not set -# CONFIG_FPE_NWFPE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FTTMR010_TIMER=y -CONFIG_FTWDT010_WATCHDOG=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_GEMINI_ETHERNET=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_FTGPIO010=y -CONFIG_GPIO_GENERIC=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HDMI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_KEYBOARD=y -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IPC_NS=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_ISDN is not set -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -CONFIG_KERNEL_LZMA=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_CORE=y -CONFIG_KEYBOARD_DLINK_DIR685=y -# CONFIG_LDM_DEBUG is not set -CONFIG_LDM_PARTITION=y -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_LOGO_LINUX_MONO is not set -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MANDATORY_FILE_LOCKING=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_GPIO=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_GEMINI=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_REALTEK_SMI=y -CONFIG_NET_DSA_VITESSE_VSC73XX=y -CONFIG_NET_NS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NVMEM=y -CONFIG_OABI_COMPAT=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_PATA_FTIDE010=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_FTPCI100=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PID_NS=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_GEMINI=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GEMINI_POWEROFF=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_RATIONAL=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REALTEK_PHY=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RSEQ=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_FTRTC010=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_NVMEM=y -CONFIG_SATA_GEMINI=y -CONFIG_SATA_PMP=y -CONFIG_SCSI=y -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_PROC_FS is not set -CONFIG_SENSORS_DRIVETEMP=y -CONFIG_SENSORS_GPIO_FAN=y -CONFIG_SENSORS_LM75=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_SERPORT=y -CONFIG_SG_POOL=y -CONFIG_SLUB_DEBUG=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRCU=y -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_SWPHY=y -CONFIG_SYNC_FILE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TASKS_RCU=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TREE_SRCU=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_UNWINDER_ARM=y -CONFIG_USB_SUPPORT=y -CONFIG_USER_NS=y -CONFIG_USE_OF=y -CONFIG_UTS_NS=y -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VITESSE_PHY=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_X86=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch deleted file mode 100644 index df68adc66b..0000000000 --- a/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch +++ /dev/null @@ -1,131 +0,0 @@ -From 3aaff88a0f5e154aa5a489d59fd4015a2a937c23 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Fri, 21 Apr 2017 22:19:00 +0200 -Subject: [PATCH 1/7] usb: host: fotg2: add Gemini-specific handling - -The Cortina Systems Gemini has bolted on a PHY inside the -silicon that can be handled by six bits in a MISC register in -the system controller. - -If we are running on Gemini, look up a syscon regmap through -a phandle and enable VBUS and optionally the Mini-B connector. - -If the device is flagged as "wakeup-source" using the standard -DT bindings, we also enable this in the global controller for -respective port. - -Signed-off-by: Linus Walleij ---- - drivers/usb/host/Kconfig | 1 + - drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++ - 2 files changed, 77 insertions(+) - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -363,6 +363,7 @@ config USB_ISP1362_HCD - config USB_FOTG210_HCD - tristate "FOTG210 HCD support" - depends on USB && HAS_DMA && HAS_IOMEM -+ select MFD_SYSCON - ---help--- - Faraday FOTG210 is an OTG controller which can be configured as - an USB2.0 host. It is designed to meet USB2.0 EHCI specification ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -33,6 +33,10 @@ - #include - #include - #include -+#include -+/* For Cortina Gemini */ -+#include -+#include - - #include - #include -@@ -5555,6 +5559,72 @@ static void fotg210_init(struct fotg210_ - iowrite32(value, &fotg210->regs->otgcsr); - } - -+/* -+ * Gemini-specific initialization function, only executed on the -+ * Gemini SoC using the global misc control register. -+ */ -+#define GEMINI_GLOBAL_MISC_CTRL 0x30 -+#define GEMINI_MISC_USB0_WAKEUP BIT(14) -+#define GEMINI_MISC_USB1_WAKEUP BIT(15) -+#define GEMINI_MISC_USB0_VBUS_ON BIT(22) -+#define GEMINI_MISC_USB1_VBUS_ON BIT(23) -+#define GEMINI_MISC_USB0_MINI_B BIT(29) -+#define GEMINI_MISC_USB1_MINI_B BIT(30) -+ -+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd) -+{ -+ struct device_node *np = dev->of_node; -+ struct regmap *map; -+ bool mini_b; -+ bool wakeup; -+ u32 mask, val; -+ int ret; -+ -+ map = syscon_regmap_lookup_by_phandle(np, "syscon"); -+ if (IS_ERR(map)) { -+ dev_err(dev, "no syscon\n"); -+ return PTR_ERR(map); -+ } -+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b"); -+ wakeup = of_property_read_bool(np, "wakeup-source"); -+ -+ /* -+ * Figure out if this is USB0 or USB1 by simply checking the -+ * physical base address. -+ */ -+ mask = 0; -+ if (hcd->rsrc_start == 0x69000000) { -+ val = GEMINI_MISC_USB1_VBUS_ON; -+ if (mini_b) -+ val |= GEMINI_MISC_USB1_MINI_B; -+ else -+ mask |= GEMINI_MISC_USB1_MINI_B; -+ if (wakeup) -+ val |= GEMINI_MISC_USB1_WAKEUP; -+ else -+ mask |= GEMINI_MISC_USB1_WAKEUP; -+ } else { -+ val = GEMINI_MISC_USB0_VBUS_ON; -+ if (mini_b) -+ val |= GEMINI_MISC_USB0_MINI_B; -+ else -+ mask |= GEMINI_MISC_USB0_MINI_B; -+ if (wakeup) -+ val |= GEMINI_MISC_USB0_WAKEUP; -+ else -+ mask |= GEMINI_MISC_USB0_WAKEUP; -+ } -+ -+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val); -+ if (ret) { -+ dev_err(dev, "failed to initialize Gemini PHY\n"); -+ return ret; -+ } -+ -+ dev_info(dev, "initialized Gemini PHY\n"); -+ return 0; -+} -+ - /** - * fotg210_hcd_probe - initialize faraday FOTG210 HCDs - * -@@ -5632,6 +5702,12 @@ static int fotg210_hcd_probe(struct plat - - fotg210_init(fotg210); - -+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) { -+ retval = fotg210_gemini_init(dev, hcd); -+ if (retval) -+ goto failed_dis_clk; -+ } -+ - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) { - dev_err(dev, "failed to add hcd with err %d\n", retval); diff --git a/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch deleted file mode 100644 index 39dfd3d535..0000000000 --- a/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch +++ /dev/null @@ -1,37 +0,0 @@ -From a2de8560885469f3d76c80207a669029e4fc8a45 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Mon, 11 Mar 2019 15:44:29 +0100 -Subject: [PATCH 2/7] ARM: dts: Augment DIR-685 partition table for OpenWrt - -Rename the firmware partition so that the firmware MTD -splitter will do its job, drop the rootfs arguments as -the MTD splitter will set this up automatically. - -Signed-off-by: Linus Walleij ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -20,7 +20,7 @@ - }; - - chosen { -- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300"; -+ bootargs = "console=ttyS0,19200n8 consoleblank=300"; - stdout-path = "uart0:19200n8"; - }; - -@@ -285,9 +285,9 @@ - * this is called "upgrade" on the vendor system. - */ - partition@40000 { -- label = "upgrade"; -+ compatible = "wrg"; -+ label = "firmware"; - reg = <0x00040000 0x01f40000>; -- read-only; - }; - /* RGDB, Residental Gateway Database? */ - partition@1f80000 { diff --git a/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch b/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch deleted file mode 100644 index cf4a74f86a..0000000000 --- a/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 9b95b301b219df19c20f4a563f1da6338b09b0d0 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Tue, 31 Dec 2019 18:14:28 +0100 -Subject: [PATCH 3/7] ARM: dts: gemini: Rename IDE nodes - -By renaming the ATA drive nodes to "ide@" we activate the -semantic checks to the DT schema for the controller and use -the correct notation for PATA drives. - -Signed-off-by: Linus Walleij ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +- - arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +- - arch/arm/boot/dts/gemini-nas4220b.dts | 4 ++-- - arch/arm/boot/dts/gemini-sl93512r.dts | 4 ++-- - arch/arm/boot/dts/gemini-sq201.dts | 2 +- - arch/arm/boot/dts/gemini.dtsi | 8 ++++++-- - 6 files changed, 13 insertions(+), 9 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -443,7 +443,7 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - status = "okay"; - }; - ---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts -@@ -297,7 +297,7 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/gemini-nas4220b.dts -+++ b/arch/arm/boot/dts/gemini-nas4220b.dts -@@ -170,11 +170,11 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - status = "okay"; - }; - -- ata@63400000 { -+ ide@63400000 { - status = "okay"; - }; - ---- a/arch/arm/boot/dts/gemini-sl93512r.dts -+++ b/arch/arm/boot/dts/gemini-sl93512r.dts -@@ -293,11 +293,11 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - status = "okay"; - }; - -- ata@63400000 { -+ ide@63400000 { - status = "okay"; - }; - ---- a/arch/arm/boot/dts/gemini-sq201.dts -+++ b/arch/arm/boot/dts/gemini-sq201.dts -@@ -289,7 +289,7 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - status = "okay"; - }; - ---- a/arch/arm/boot/dts/gemini.dtsi -+++ b/arch/arm/boot/dts/gemini.dtsi -@@ -357,7 +357,7 @@ - }; - }; - -- ata@63000000 { -+ ide@63000000 { - compatible = "cortina,gemini-pata", "faraday,ftide010"; - reg = <0x63000000 0x1000>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; -@@ -366,9 +366,11 @@ - clock-names = "PCLK"; - sata = <&sata>; - status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; - }; - -- ata@63400000 { -+ ide@63400000 { - compatible = "cortina,gemini-pata", "faraday,ftide010"; - reg = <0x63400000 0x1000>; - interrupts = <5 IRQ_TYPE_EDGE_RISING>; -@@ -377,6 +379,8 @@ - clock-names = "PCLK"; - sata = <&sata>; - status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; - }; - - dma-controller@67000000 { diff --git a/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch b/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch deleted file mode 100644 index 5949b92be1..0000000000 --- a/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 2b2e9d0e1ee4765b21c648235489028c6dc7e336 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Tue, 31 Dec 2019 18:18:08 +0100 -Subject: [PATCH 4/7] ARM: dts: gemini: Add thermal zone to DIR-685 - -The DIR-685 can now exploit the thermal zone added by the -drive temperature sensor inside the hard drive. We have -patched the libata subsystem to assign the device nodes -properly to the SCSI devices and this is what the drivetemp -driver will use to populate the sensor and the thermal -zone, so pick that up into the thermal zone and let this -control the fan. - -The hardware lacks an embedded temperature sensor so the -D-Link vendor firmware uses this method to control the -temperature of the NAS enclosure using the thermal sensor -inside the hard drive. - -The drive temperature trigger points to be used comes from -the vendor firmware. - -Signed-off-by: Linus Walleij ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 48 ++++++++++++++++++++-- - 1 file changed, 45 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -119,13 +119,11 @@ - - /* - * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. -- * Since the platform has no temperature sensor, this is controlled -- * from userspace by using the hard disks S.M.A.R.T. temperature - * sensor. It is turned on when the temperature exceeds 46 degrees - * and turned off when the temperatures goes below 41 degrees - * (celsius). - */ -- gpio-fan { -+ fan0: gpio-fan { - compatible = "gpio-fan"; - /* Collides with IDE */ - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; -@@ -133,6 +131,40 @@ - #cooling-cells = <2>; - }; - -+ thermal-zones { -+ chassis-thermal { -+ /* Poll every 20 seconds */ -+ polling-delay = <20000>; -+ /* Poll every 2nd second when cooling */ -+ polling-delay-passive = <2000>; -+ /* Use the thermal sensor in the hard drive */ -+ thermal-sensors = <&drive0>; -+ -+ /* Tripping points from the fan.script in the rootfs */ -+ trips { -+ alert: chassis-alert { -+ /* At 43 degrees turn on the fan */ -+ temperature = <43000>; -+ hysteresis = <3000>; -+ type = "active"; -+ }; -+ crit: chassis-crit { -+ /* Just shut down at 60 degrees */ -+ temperature = <60000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ -+ cooling-maps { -+ map0 { -+ trip = <&alert>; -+ cooling-device = <&fan0 1 1>; -+ }; -+ }; -+ }; -+ }; -+ - /* - * The touchpad input is connected to a GPIO bit-banged - * I2C bus. -@@ -445,6 +477,16 @@ - - ide@63000000 { - status = "okay"; -+ -+ /* -+ * This drive may have a temperature sensor with a -+ * thermal zone we can use for thermal control of the -+ * chassis temperature using the fan. -+ */ -+ drive0: ide-port@0 { -+ reg = <0>; -+ #thermal-sensor-cells = <0>; -+ }; - }; - - display-controller@6a000000 {