From: Nita Vesa Date: Fri, 29 Apr 2022 10:57:24 +0000 (+0300) Subject: ramips: Add Xiaomi Mi Router 4A 100M International X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ca58b8b4feb7a56e262be7260032a06032264a48;p=openwrt%2Fstaging%2Fstintel.git ramips: Add Xiaomi Mi Router 4A 100M International The international version of Mi Router 4A 100M is physically identical to the non-international one, but appears to be using a different partitioning scheme with the "overlay" partition being 2MiB in size instead of 1MiB. This means the following "firmware" partition starts at a different address and the DTS needs to be adjusted for the firmware to work. Signed-off-by: Nita Vesa (cherry picked from commit 1a8c74da709190e5157af9f5c2502b600f6273bb) Signed-off-by: Tom Herbers --- diff --git a/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m-intl.dts b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m-intl.dts new file mode 100644 index 0000000000..cdf259c51a --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m-intl.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_xiaomi_mi-router-4.dtsi" + +/ { + compatible = "xiaomi,mi-router-4a-100m-intl", "mediatek,mt7628an-soc"; + model = "Xiaomi Mi Router 4A (100M International Edition)"; +}; + +&partitions { + partition@60000 { + label = "overlay"; + reg = <0x60000 0x200000>; + read-only; + }; + + partition@260000 { + label = "firmware"; + reg = <0x260000 0xda0000>; + compatible = "denx,uimage"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-1)>; +}; + +&esw { + mediatek,portmap = <0x3e>; + mediatek,portdisable = <0x2a>; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 81b68f6354..2106324684 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -902,6 +902,16 @@ define Device/xiaomi_mi-router-4a-100m endef TARGET_DEVICES += xiaomi_mi-router-4a-100m +define Device/xiaomi_mi-router-4a-100m-intl + IMAGE_SIZE := 14976k + DEVICE_VENDOR := Xiaomi + DEVICE_MODEL := Mi Router 4A + DEVICE_VARIANT := 100M International Edition + DEVICE_PACKAGES := kmod-mt76x2 + SUPPORTED_DEVICES += xiaomi,mir4a-100m-intl +endef +TARGET_DEVICES += xiaomi_mi-router-4a-100m-intl + define Device/xiaomi_mi-router-4c IMAGE_SIZE := 14976k DEVICE_VENDOR := Xiaomi diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 408f5f5e01..deb174909a 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -148,7 +148,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:wan" "3:lan" "4:lan" "6@eth0" ;; - xiaomi,mi-router-4a-100m) + xiaomi,mi-router-4a-100m|\ + xiaomi,mi-router-4a-100m-intl) ucidef_add_switch "switch0" \ "4:lan:1" "2:lan:2" "0:wan" "6@eth0" ;; @@ -272,6 +273,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary factory 0x28) ;; xiaomi,mi-router-4a-100m|\ + xiaomi,mi-router-4a-100m-intl|\ xiaomi,mi-router-4c) wan_mac=$(mtd_get_mac_binary factory 0x4) ;;