From: Hauke Mehrtens Date: Thu, 25 Jun 2015 21:43:16 +0000 (+0000) Subject: bcm53xx: add arm l2c overwrite options like in mainline kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ca49bcadae57798588a8f4c50916f71b1da2b86d;p=openwrt%2Fstaging%2Fsvanheule.git bcm53xx: add arm l2c overwrite options like in mainline kernel Instead of setting the l2c_aux_val variable in the board code make it possible to set these through device tree and make use of that. Signed-off-by: Hauke Mehrtens SVN-Revision: 46129 --- diff --git a/target/linux/bcm53xx/patches-4.1/070-ARM-l2c-restore-the-behaviour-documented-above-l2c_e.patch b/target/linux/bcm53xx/patches-4.1/070-ARM-l2c-restore-the-behaviour-documented-above-l2c_e.patch new file mode 100644 index 0000000000..abee99d81a --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/070-ARM-l2c-restore-the-behaviour-documented-above-l2c_e.patch @@ -0,0 +1,43 @@ +From d965b0fca7dcde3f82c982e0bf1631069fdeb8c9 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 15 May 2015 11:56:45 +0100 +Subject: [PATCH 70/74] ARM: l2c: restore the behaviour documented above + l2c_enable() + +l2c_enable() is documented that it must not be called if the cache has +already been enabled. Unfortunately, commit 6b49241ac252 ("ARM: 8259/1: +l2c: Refactor the driver to use commit-like interface") changed this +without updating the comment, for very little reason. Revert this +change and restore the expected behaviour. + +Signed-off-by: Russell King +--- + arch/arm/mm/cache-l2x0.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -129,10 +129,6 @@ static void l2c_enable(void __iomem *bas + { + unsigned long flags; + +- /* Do not touch the controller if already enabled. */ +- if (readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN) +- return; +- + l2x0_saved_regs.aux_ctrl = aux; + l2c_configure(base); + +@@ -163,7 +159,11 @@ static void l2c_save(void __iomem *base) + + static void l2c_resume(void) + { +- l2c_enable(l2x0_base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock); ++ void __iomem *base = l2x0_base; ++ ++ /* Do not touch the controller if already enabled. */ ++ if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) ++ l2c_enable(base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock); + } + + /* diff --git a/target/linux/bcm53xx/patches-4.1/071-ARM-l2c-write-auxiliary-control-register-first.patch b/target/linux/bcm53xx/patches-4.1/071-ARM-l2c-write-auxiliary-control-register-first.patch new file mode 100644 index 0000000000..a9cca836ae --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/071-ARM-l2c-write-auxiliary-control-register-first.patch @@ -0,0 +1,30 @@ +From 7705dd256ce363f8b01429efb2f0dc4d1ee23c89 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 15 May 2015 11:07:14 +0100 +Subject: [PATCH 71/74] ARM: l2c: write auxiliary control register first + +Before calling the controller specific configuration function, write +the auxiliary control register first, so that bits shared with other +registers (such as the prefetch control register) are not overwritten +by the later write to the auxctrl register. + +Signed-off-by: Russell King +--- + arch/arm/mm/cache-l2x0.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -115,10 +115,10 @@ static void l2c_configure(void __iomem * + return; + } + ++ l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); ++ + if (l2x0_data->configure) + l2x0_data->configure(base); +- +- l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); + } + + /* diff --git a/target/linux/bcm53xx/patches-4.1/072-ARM-l2c-clean-up-l2c_configure.patch b/target/linux/bcm53xx/patches-4.1/072-ARM-l2c-clean-up-l2c_configure.patch new file mode 100644 index 0000000000..72e9e76124 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/072-ARM-l2c-clean-up-l2c_configure.patch @@ -0,0 +1,109 @@ +From 50beefde30224888d6d63224405ace4bdd4b32a0 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 15 May 2015 11:05:54 +0100 +Subject: [PATCH 72/74] ARM: l2c: clean up l2c_configure() + +l2c_configure() does not follow the pattern of other l2c_* functions. +Fix this so that it does to avoid future confusion. + +Signed-off-by: Russell King +--- + arch/arm/mm/cache-l2x0.c | 23 ++++++++++++++--------- + 1 file changed, 14 insertions(+), 9 deletions(-) + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -110,15 +110,7 @@ static inline void l2c_unlock(void __iom + + static void l2c_configure(void __iomem *base) + { +- if (outer_cache.configure) { +- outer_cache.configure(&l2x0_saved_regs); +- return; +- } +- + l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); +- +- if (l2x0_data->configure) +- l2x0_data->configure(base); + } + + /* +@@ -130,7 +122,11 @@ static void l2c_enable(void __iomem *bas + unsigned long flags; + + l2x0_saved_regs.aux_ctrl = aux; +- l2c_configure(base); ++ ++ if (outer_cache.configure) ++ outer_cache.configure(&l2x0_saved_regs); ++ else ++ l2x0_data->configure(base); + + l2c_unlock(base, num_lock); + +@@ -252,6 +248,7 @@ static const struct l2c_init_data l2c210 + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, ++ .configure = l2c_configure, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -409,6 +406,7 @@ static const struct l2c_init_data l2c220 + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, ++ .configure = l2c_configure, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, +@@ -569,6 +567,8 @@ static void l2c310_configure(void __iome + { + unsigned revision; + ++ l2c_configure(base); ++ + /* restore pl310 setup */ + l2c_write_sec(l2x0_saved_regs.tag_latency, base, + L310_TAG_LATENCY_CTRL); +@@ -1066,6 +1066,7 @@ static const struct l2c_init_data of_l2c + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, ++ .configure = l2c_configure, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -1084,6 +1085,7 @@ static const struct l2c_init_data of_l2c + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, ++ .configure = l2c_configure, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, +@@ -1416,6 +1418,7 @@ static const struct l2c_init_data of_aur + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, ++ .configure = l2c_configure, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, +@@ -1435,6 +1438,7 @@ static const struct l2c_init_data of_aur + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, ++ .configure = l2c_configure, + .outer_cache = { + .resume = l2c_resume, + }, +@@ -1608,6 +1612,7 @@ static void __init tauros3_save(void __i + + static void tauros3_configure(void __iomem *base) + { ++ l2c_configure(base); + writel_relaxed(l2x0_saved_regs.aux2_ctrl, + base + TAUROS3_AUX2_CTRL); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, diff --git a/target/linux/bcm53xx/patches-4.1/073-ARM-l2c-only-unlock-caches-if-NS_LOCKDOWN-bit-is-set.patch b/target/linux/bcm53xx/patches-4.1/073-ARM-l2c-only-unlock-caches-if-NS_LOCKDOWN-bit-is-set.patch new file mode 100644 index 0000000000..852dd028d7 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/073-ARM-l2c-only-unlock-caches-if-NS_LOCKDOWN-bit-is-set.patch @@ -0,0 +1,149 @@ +From e946a8cbe4a47a7c2615ffb0d45712e72c7d0f3a Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 15 May 2015 11:51:51 +0100 +Subject: [PATCH 73/74] ARM: l2c: only unlock caches if NS_LOCKDOWN bit is set + +Some L2C caches have a bit which allows non-secure software to control +the cache lockdown. Some platforms are unable to set this bit. To +avoid receiving an abort while trying to unlock the cache lines, check +the state of this bit before unlocking. We do this by providing a new +method in the l2c_init_data to perform the unlocking. + +Signed-off-by: Russell King +--- + arch/arm/mm/cache-l2x0.c | 26 +++++++++++++++++++++++++- + 1 file changed, 25 insertions(+), 1 deletion(-) + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -42,6 +42,7 @@ struct l2c_init_data { + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + void (*configure)(void __iomem *); ++ void (*unlock)(void __iomem *, unsigned); + struct outer_cache_fns outer_cache; + }; + +@@ -128,7 +129,7 @@ static void l2c_enable(void __iomem *bas + else + l2x0_data->configure(base); + +- l2c_unlock(base, num_lock); ++ l2x0_data->unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); +@@ -249,6 +250,7 @@ static const struct l2c_init_data l2c210 + .enable = l2c_enable, + .save = l2c_save, + .configure = l2c_configure, ++ .unlock = l2c_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -400,6 +402,12 @@ static void l2c220_enable(void __iomem * + l2c_enable(base, aux, num_lock); + } + ++static void l2c220_unlock(void __iomem *base, unsigned num_lock) ++{ ++ if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN) ++ l2c_unlock(base, num_lock); ++} ++ + static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, +@@ -407,6 +415,7 @@ static const struct l2c_init_data l2c220 + .enable = l2c220_enable, + .save = l2c_save, + .configure = l2c_configure, ++ .unlock = l2c220_unlock, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, +@@ -755,6 +764,12 @@ static void l2c310_resume(void) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + } + ++static void l2c310_unlock(void __iomem *base, unsigned num_lock) ++{ ++ if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN) ++ l2c_unlock(base, num_lock); ++} ++ + static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, +@@ -763,6 +778,7 @@ static const struct l2c_init_data l2c310 + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, ++ .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -1067,6 +1083,7 @@ static const struct l2c_init_data of_l2c + .enable = l2c_enable, + .save = l2c_save, + .configure = l2c_configure, ++ .unlock = l2c_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -1086,6 +1103,7 @@ static const struct l2c_init_data of_l2c + .enable = l2c220_enable, + .save = l2c_save, + .configure = l2c_configure, ++ .unlock = l2c220_unlock, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, +@@ -1213,6 +1231,7 @@ static const struct l2c_init_data of_l2c + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, ++ .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -1242,6 +1261,7 @@ static const struct l2c_init_data of_l2c + .fixup = l2c310_fixup, + .save = l2c310_save, + .configure = l2c310_configure, ++ .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, +@@ -1419,6 +1439,7 @@ static const struct l2c_init_data of_aur + .fixup = aurora_fixup, + .save = aurora_save, + .configure = l2c_configure, ++ .unlock = l2c_unlock, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, +@@ -1439,6 +1460,7 @@ static const struct l2c_init_data of_aur + .fixup = aurora_fixup, + .save = aurora_save, + .configure = l2c_configure, ++ .unlock = l2c_unlock, + .outer_cache = { + .resume = l2c_resume, + }, +@@ -1589,6 +1611,7 @@ static const struct l2c_init_data of_bcm + .enable = l2c310_enable, + .save = l2c310_save, + .configure = l2c310_configure, ++ .unlock = l2c310_unlock, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, +@@ -1626,6 +1649,7 @@ static const struct l2c_init_data of_tau + .enable = l2c_enable, + .save = tauros3_save, + .configure = tauros3_configure, ++ .unlock = l2c_unlock, + /* Tauros3 broadcasts L1 cache operations to L2 */ + .outer_cache = { + .resume = l2c_resume, diff --git a/target/linux/bcm53xx/patches-4.1/074-ARM-l2c-avoid-passing-auxiliary-control-register-thr.patch b/target/linux/bcm53xx/patches-4.1/074-ARM-l2c-avoid-passing-auxiliary-control-register-thr.patch new file mode 100644 index 0000000000..05e739ffc8 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/074-ARM-l2c-avoid-passing-auxiliary-control-register-thr.patch @@ -0,0 +1,129 @@ +From 5b290ec2074c68b9f4f8f8789fa9b3e1782869e7 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 15 May 2015 12:03:29 +0100 +Subject: [PATCH 74/74] ARM: l2c: avoid passing auxiliary control register + through enable method + +Avoid passing the auxiliary control register value through the enable +method. In the resume path, we have to read the value stored in +l2x0_saved_regs.aux_ctrl, only to have it immediately written back by +l2c_enable(). We can avoid this if we have __l2c_init() save the value +directly to l2x0_saved_regs.aux_ctrl before calling the specific enable +method. + +Signed-off-by: Russell King +--- + arch/arm/mm/cache-l2x0.c | 32 +++++++++++++++++--------------- + 1 file changed, 17 insertions(+), 15 deletions(-) + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -38,7 +38,7 @@ struct l2c_init_data { + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); +- void (*enable)(void __iomem *, u32, unsigned); ++ void (*enable)(void __iomem *, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + void (*configure)(void __iomem *); +@@ -118,12 +118,10 @@ static void l2c_configure(void __iomem * + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +-static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) ++static void l2c_enable(void __iomem *base, unsigned num_lock) + { + unsigned long flags; + +- l2x0_saved_regs.aux_ctrl = aux; +- + if (outer_cache.configure) + outer_cache.configure(&l2x0_saved_regs); + else +@@ -160,7 +158,7 @@ static void l2c_resume(void) + + /* Do not touch the controller if already enabled. */ + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) +- l2c_enable(base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock); ++ l2c_enable(base, l2x0_data->num_lock); + } + + /* +@@ -390,16 +388,16 @@ static void l2c220_sync(void) + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + +-static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) ++static void l2c220_enable(void __iomem *base, unsigned num_lock) + { + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ +- aux |= L220_AUX_CTRL_NS_LOCKDOWN; ++ l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN; + +- l2c_enable(base, aux, num_lock); ++ l2c_enable(base, num_lock); + } + + static void l2c220_unlock(void __iomem *base, unsigned num_lock) +@@ -612,10 +610,11 @@ static int l2c310_cpu_enable_flz(struct + return NOTIFY_OK; + } + +-static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) ++static void __init l2c310_enable(void __iomem *base, unsigned num_lock) + { + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; + bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; ++ u32 aux = l2x0_saved_regs.aux_ctrl; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9) { +@@ -658,9 +657,9 @@ static void __init l2c310_enable(void __ + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ +- aux |= L310_AUX_CTRL_NS_LOCKDOWN; ++ l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN; + +- l2c_enable(base, aux, num_lock); ++ l2c_enable(base, num_lock); + + /* Read back resulting AUX_CTRL value as it could have been altered. */ + aux = readl_relaxed(base + L2X0_AUX_CTRL); +@@ -872,8 +871,11 @@ static int __init __l2c_init(const struc + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. + */ +- if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) +- data->enable(l2x0_base, aux, data->num_lock); ++ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { ++ l2x0_saved_regs.aux_ctrl = aux; ++ ++ data->enable(l2x0_base, data->num_lock); ++ } + + outer_cache = fns; + +@@ -1388,7 +1390,7 @@ static void aurora_save(void __iomem *ba + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +-static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, ++static void __init aurora_enable_no_outer(void __iomem *base, + unsigned num_lock) + { + u32 u; +@@ -1399,7 +1401,7 @@ static void __init aurora_enable_no_oute + + isb(); + +- l2c_enable(base, aux, num_lock); ++ l2c_enable(base, num_lock); + } + + static void __init aurora_fixup(void __iomem *base, u32 cache_id, diff --git a/target/linux/bcm53xx/patches-4.1/075-ARM-8391-1-l2c-add-options-to-overwrite-prefetching-.patch b/target/linux/bcm53xx/patches-4.1/075-ARM-8391-1-l2c-add-options-to-overwrite-prefetching-.patch new file mode 100644 index 0000000000..857d2c4380 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/075-ARM-8391-1-l2c-add-options-to-overwrite-prefetching-.patch @@ -0,0 +1,60 @@ +From ec3bd0e68a679a7af2c46af1ddc9af8b534a8b0e Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Wed, 10 Jun 2015 20:23:24 +0100 +Subject: [PATCH] ARM: 8391/1: l2c: add options to overwrite prefetching + behavior + +These options make it possible to overwrites the data and instruction +prefetching behavior of the arm pl310 cache controller. + +Signed-off-by: Hauke Mehrtens +Acked-by: Florian Fainelli +Signed-off-by: Russell King +--- + Documentation/devicetree/bindings/arm/l2cc.txt | 5 +++++ + arch/arm/mm/cache-l2x0.c | 20 ++++++++++++++++++++ + 2 files changed, 25 insertions(+) + +--- a/Documentation/devicetree/bindings/arm/l2cc.txt ++++ b/Documentation/devicetree/bindings/arm/l2cc.txt +@@ -67,6 +67,11 @@ Optional properties: + disable if zero. + - arm,prefetch-offset : Override prefetch offset value. Valid values are + 0-7, 15, 23, and 31. ++- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> ++ (forcibly enable), property absent (retain settings set by firmware) ++- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), ++ <1> (forcibly enable), property absent (retain settings set by ++ firmware) + + Example: + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -1221,6 +1221,26 @@ static void __init l2c310_of_parse(const + pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); + } + ++ ret = of_property_read_u32(np, "prefetch-data", &val); ++ if (ret == 0) { ++ if (val) ++ prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH; ++ else ++ prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; ++ } else if (ret != -EINVAL) { ++ pr_err("L2C-310 OF prefetch-data property value is missing\n"); ++ } ++ ++ ret = of_property_read_u32(np, "prefetch-instr", &val); ++ if (ret == 0) { ++ if (val) ++ prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH; ++ else ++ prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; ++ } else if (ret != -EINVAL) { ++ pr_err("L2C-310 OF prefetch-instr property value is missing\n"); ++ } ++ + l2x0_saved_regs.prefetch_ctrl = prefetch; + } + diff --git a/target/linux/bcm53xx/patches-4.1/077-ARM-l2c-Add-support-for-the-arm-shared-override-prop.patch b/target/linux/bcm53xx/patches-4.1/077-ARM-l2c-Add-support-for-the-arm-shared-override-prop.patch new file mode 100644 index 0000000000..cac4c0c9c9 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/077-ARM-l2c-Add-support-for-the-arm-shared-override-prop.patch @@ -0,0 +1,81 @@ +From 1bc7c02e7f37ddfa09cb0db330ee8cd4034d6410 Mon Sep 17 00:00:00 2001 +From: Geert Uytterhoeven +Date: Thu, 7 May 2015 11:27:11 +0200 +Subject: [PATCH 1/4] ARM: l2c: Add support for the "arm, shared-override" + property + +"CoreLink Level 2 Cache Controller L2C-310", p. 2-15, section 2.3.2 +Shareable attribute" states: + + "The default behavior of the cache controller with respect to the + shareable attribute is to transform Normal Memory Non-cacheable + transactions into: + - cacheable no allocate for reads + - write through no write allocate for writes." + +Depending on the system architecture, this may cause memory corruption +in the presence of bus mastering devices (e.g. OHCI). To avoid such +corruption, the default behavior can be disabled by setting the Shared +Override bit in the Auxiliary Control register. + +Currently the Shared Override bit can be set only using C code: + - by calling l2x0_init() directly, which is deprecated, + - by setting/clearing the bit in the machine_desc.l2c_aux_val/mask + fields, but using values differing from 0/~0 is also deprecated. + +Hence add support for an "arm,shared-override" device tree property for +the l2c device node. By specifying this property, affected systems can +indicate that non-cacheable transactions must not be transformed. +Then, it's up to the OS to decide. The current behavior is to set the +"shared attribute override enable" bit, as there may exist kernel linear +mappings and cacheable aliases for the DMA buffers, even if CMA is +enabled. + +See also commit 1a8e41cd672f894b ("ARM: 6395/1: VExpress: Set bit 22 in +the PL310 (cache controller) AuxCtlr register"): + + "Clearing bit 22 in the PL310 Auxiliary Control register (shared + attribute override enable) has the side effect of transforming + Normal Shared Non-cacheable reads into Cacheable no-allocate reads. + + Coherent DMA buffers in Linux always have a Cacheable alias via the + kernel linear mapping and the processor can speculatively load + cache lines into the PL310 controller. With bit 22 cleared, + Non-cacheable reads would unexpectedly hit such cache lines leading + to buffer corruption." + +Signed-off-by: Geert Uytterhoeven +--- + Documentation/devicetree/bindings/arm/l2cc.txt | 6 ++++++ + arch/arm/mm/cache-l2x0.c | 5 +++++ + 2 files changed, 11 insertions(+) + +--- a/Documentation/devicetree/bindings/arm/l2cc.txt ++++ b/Documentation/devicetree/bindings/arm/l2cc.txt +@@ -72,6 +72,12 @@ Optional properties: + - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) ++- arm,shared-override : The default behavior of the pl310 cache controller with ++ respect to the shareable attribute is to transform "normal memory ++ non-cacheable transactions" into "cacheable no allocate" (for reads) or ++ "write through no write allocate" (for writes). ++ On systems where this may cause DMA buffer corruption, this property must be ++ specified to indicate that such transforms are precluded. + + Example: + +--- a/arch/arm/mm/cache-l2x0.c ++++ b/arch/arm/mm/cache-l2x0.c +@@ -1171,6 +1171,11 @@ static void __init l2c310_of_parse(const + } + } + ++ if (of_property_read_bool(np, "arm,shared-override")) { ++ *aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE; ++ *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; ++ } ++ + prefetch = l2x0_saved_regs.prefetch_ctrl; + + ret = of_property_read_u32(np, "arm,double-linefill", &val); diff --git a/target/linux/bcm53xx/patches-4.1/079-ARM-BCM5301X-activate-some-additional-options-in-pl3.patch b/target/linux/bcm53xx/patches-4.1/079-ARM-BCM5301X-activate-some-additional-options-in-pl3.patch new file mode 100644 index 0000000000..bfe4304744 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/079-ARM-BCM5301X-activate-some-additional-options-in-pl3.patch @@ -0,0 +1,29 @@ +From e8ec653c767f56346eb1fadbc07e0706d6dbd56f Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Thu, 14 May 2015 00:38:28 +0200 +Subject: [PATCH 3/3] ARM: BCM5301X: activate some additional options in pl310 + cache controller + +In the default Broadcom SDK the shared override is activated for this +cache controller, do the same in the upstream code. Data and +instruction prefetching is not activated by default for this cache +controller on the bcm53xx SoC, do it manually like it is done in the +vendor SDK. + +Signed-off-by: Hauke Mehrtens +--- + arch/arm/boot/dts/bcm5301x.dtsi | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -78,6 +78,9 @@ + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; ++ arm,shared-override; ++ prefetch-data = <1>; ++ prefetch-instr = <1>; + cache-level = <2>; + }; + }; diff --git a/target/linux/bcm53xx/patches-4.1/305-ARM-BCM53XX-set-customized-AUXCTL.patch b/target/linux/bcm53xx/patches-4.1/305-ARM-BCM53XX-set-customized-AUXCTL.patch deleted file mode 100644 index a2bed2aeb7..0000000000 --- a/target/linux/bcm53xx/patches-4.1/305-ARM-BCM53XX-set-customized-AUXCTL.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4a658590f83c1e916ab63ed7fe6f0841924247db Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 3 Oct 2014 18:37:33 +0200 -Subject: [PATCH 2/2] ARM: BCM53XX: set customized AUXCTL - -This activated some more features in the l310 cache. - -This is based on some vendor code - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/mach-bcm/bcm_5301x.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-bcm/bcm_5301x.c -+++ b/arch/arm/mach-bcm/bcm_5301x.c -@@ -50,7 +50,12 @@ static const char __initconst *bcm5301x_ - }; - - DT_MACHINE_START(BCM5301X, "BCM5301X") -- .l2c_aux_val = 0, -+ .l2c_aux_val = L310_AUX_CTRL_CACHE_REPLACE_RR | -+ L310_AUX_CTRL_DATA_PREFETCH | -+ L310_AUX_CTRL_INSTR_PREFETCH | -+ L310_AUX_CTRL_EARLY_BRESP | -+ L2C_AUX_CTRL_SHARED_OVERRIDE | -+ L310_AUX_CTRL_FULL_LINE_ZERO, - .l2c_aux_mask = ~0, - .init_early = bcm5301x_init_early, - .dt_compat = bcm5301x_dt_compat, diff --git a/target/linux/bcm53xx/patches-4.1/340-ARM-BCM5301X-Add-profiling-support.patch b/target/linux/bcm53xx/patches-4.1/340-ARM-BCM5301X-Add-profiling-support.patch index 291ec72f2c..eed44f7997 100644 --- a/target/linux/bcm53xx/patches-4.1/340-ARM-BCM5301X-Add-profiling-support.patch +++ b/target/linux/bcm53xx/patches-4.1/340-ARM-BCM5301X-Add-profiling-support.patch @@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau --- --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -82,6 +82,13 @@ +@@ -85,6 +85,13 @@ }; };