From: Álvaro Fernández Rojas Date: Wed, 20 May 2020 07:14:02 +0000 (+0200) Subject: bcm63xx: lzma-loader: rely on CHIP_ID for UART address X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c93cdf536a086deab0fa696989263a97b4d6c417;p=openwrt%2Fstaging%2Fldir.git bcm63xx: lzma-loader: rely on CHIP_ID for UART address lzma-loader uart output wasn't working on BCM3380/BCM6362 because these SoCs have the same processor ID. Let's use CHIP_ID for establishing the UART base address. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bcm63xx/image/Makefile b/target/linux/bcm63xx/image/Makefile index ff9ec01c45..7c3091fb66 100644 --- a/target/linux/bcm63xx/image/Makefile +++ b/target/linux/bcm63xx/image/Makefile @@ -17,7 +17,8 @@ LOADER_MAKEOPTS= \ KDIR=$(KDIR) \ LOADADDR=$(KERNEL_LOADADDR) \ RAMSIZE=$(RAMSIZE) \ - LZMA_TEXT_START=$(LZMA_TEXT_START) + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + CHIP_ID=$(CHIP_ID) RELOCATE_MAKEOPTS= \ CACHELINE_SIZE=16 \ diff --git a/target/linux/bcm63xx/image/lzma-loader/Makefile b/target/linux/bcm63xx/image/lzma-loader/Makefile index 6100a8c2ea..2be41c875a 100644 --- a/target/linux/bcm63xx/image/lzma-loader/Makefile +++ b/target/linux/bcm63xx/image/lzma-loader/Makefile @@ -1,4 +1,6 @@ # +# Copyright (C) 2020 Álvaro Fernández Rojas +# Copyright (C) 2014 Jonas Gorski # Copyright (C) 2011 OpenWrt.org # Copyright (C) 2011 Gabor Juhos # @@ -14,6 +16,25 @@ LOADER_NAME := $(basename $(notdir $(LOADER))) LOADER_DATA := TARGET_DIR := +UART_BASE_3329 := 0xb0000100 +UART_BASE_3368 := 0xfff8c100 +UART_BASE_3380 := 0xb4e00200 +UART_BASE_3383 := 0xb4e00500 +UART_BASE_3384 := 0xb4e00500 +UART_BASE_6318 := 0xb0000100 +UART_BASE_6328 := 0xb0000100 +UART_BASE_6338 := 0xfffe0300 +UART_BASE_6345 := 0xfffe0300 +UART_BASE_6348 := 0xfffe0300 +UART_BASE_6358 := 0xfffe0100 +UART_BASE_6362 := 0xb0000100 +UART_BASE_6368 := 0xb0000100 +UART_BASE_63268 := 0xb0000180 +UART_BASE_6816 := 0xb0000100 +UART_BASE_6818 := 0xb0000100 +UART_BASE_6828 := 0xb0000180 +UART_BASE := $(if $(UART_BASE_$(CHIP_ID)),$(UART_BASE_$(CHIP_ID)),0) + ifeq ($(TARGET_DIR),) TARGET_DIR := $(KDIR) endif @@ -35,6 +56,7 @@ loader-compile: $(PKG_BUILD_DIR)/.prepared $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ LZMA_TEXT_START=$(LZMA_TEXT_START) \ LOADER_DATA=$(LOADER_DATA) \ + UART_BASE=$(UART_BASE) \ clean all loader.elf: $(PKG_BUILD_DIR)/loader.elf diff --git a/target/linux/bcm63xx/image/lzma-loader/src/Makefile b/target/linux/bcm63xx/image/lzma-loader/src/Makefile index 167bf6455a..9115f75af3 100644 --- a/target/linux/bcm63xx/image/lzma-loader/src/Makefile +++ b/target/linux/bcm63xx/image/lzma-loader/src/Makefile @@ -2,6 +2,8 @@ # Makefile for the LZMA compressed kernel loader for # Atheros AR7XXX/AR9XXX based boards # +# Copyright (C) 2020 Álvaro Fernández Rojas +# Copyright (C) 2014 Jonas Gorski # Copyright (C) 2011 Gabor Juhos # # Some parts of this file was based on the OpenWrt specific lzma-loader @@ -34,6 +36,7 @@ CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ -mabi=32 -march=mips32 \ -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap CFLAGS += -D_LZMA_PROB32 +CFLAGS += -DUART_BASE=$(UART_BASE) ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ @@ -82,6 +85,3 @@ mrproper: clean clean: rm -f loader *.elf *.bin *.o - - - diff --git a/target/linux/bcm63xx/image/lzma-loader/src/board.c b/target/linux/bcm63xx/image/lzma-loader/src/board.c index 6a1b132254..843710baee 100644 --- a/target/linux/bcm63xx/image/lzma-loader/src/board.c +++ b/target/linux/bcm63xx/image/lzma-loader/src/board.c @@ -1,6 +1,7 @@ /* * BCM63XX specific implementation parts * + * Copyright (C) 2020 Álvaro Fernández Rojas * Copyright (C) 2014 Jonas Gorski * * This program is free software; you can redistribute it and/or modify it @@ -10,7 +11,6 @@ #include #include "config.h" -#include "cp0regdef.h" #define READREG(r) *(volatile unsigned int *)(r) #define WRITEREG(r,v) *(volatile unsigned int *)(r) = v @@ -18,14 +18,12 @@ #define UART_IR_REG 0x10 #define UART_FIFO_REG 0x14 -unsigned long uart_base; - static void wait_xfered(void) { unsigned int val; do { - val = READREG(uart_base + UART_IR_REG); + val = READREG(UART_BASE + UART_IR_REG); if (val & (1 << 5)) break; } while (1); @@ -33,79 +31,10 @@ static void wait_xfered(void) void board_putc(int ch) { - if (!uart_base) + if (!UART_BASE) return; wait_xfered(); - WRITEREG(uart_base + UART_FIFO_REG, ch); + WRITEREG(UART_BASE + UART_FIFO_REG, ch); wait_xfered(); } - -#define PRID_IMP_BMIPS32_REV4 0x4000 -#define PRID_IMP_BMIPS32_REV8 0x8000 -#define PRID_IMP_BMIPS3300 0x9000 -#define PRID_IMP_BMIPS3300_ALT 0x9100 -#define PRID_IMP_BMIPS3300_BUG 0x0000 -#define PRID_IMP_BMIPS43XX 0xa000 - -void board_init(void) -{ - unsigned long prid, chipid, chipid_reg; - - prid = read_32bit_c0_register($15, 0); - - switch (prid & 0xff00) { - case PRID_IMP_BMIPS32_REV4: - case PRID_IMP_BMIPS32_REV8: - case PRID_IMP_BMIPS3300_ALT: - case PRID_IMP_BMIPS3300_BUG: - chipid_reg = 0xfffe0000; - break; - case PRID_IMP_BMIPS3300: - if ((prid & 0xff) >= 0x33) - chipid_reg = 0xb0000000; - else - chipid_reg = 0xfffe0000; - break; - case PRID_IMP_BMIPS43XX: - if ((prid & 0xff) == 0x04) - chipid_reg = 0xfff8c000; - else if ((prid & 0xff) == 0x70) - return; /* FIXME: 0002a070 can be 6362 and 3380 */ - else if ((prid & 0xff) >= 0x30) - chipid_reg = 0xb0000000; - else - chipid_reg = 0xfffe0000; - break; - default: - return; - } - - chipid = READREG(chipid_reg); - - switch (chipid >> 16) { - case 0x3368: - case 0x6318: - case 0x6328: - case 0x6358: - case 0x6362: - case 0x6368: - case 0x6369: - uart_base = chipid_reg + 0x100; - break; - case 0x6316: - case 0x6326: - uart_base = chipid_reg + 0x180; - break; - case 0x3380: - uart_base = chipid_reg + 0x200; - break; - case 0x6338: - case 0x6345: - case 0x6348: - uart_base = chipid_reg + 0x300; - break; - default: - return; - } -} diff --git a/target/linux/bcm63xx/image/lzma-loader/src/loader.c b/target/linux/bcm63xx/image/lzma-loader/src/loader.c index 0848ce601f..37f42e5cef 100644 --- a/target/linux/bcm63xx/image/lzma-loader/src/loader.c +++ b/target/linux/bcm63xx/image/lzma-loader/src/loader.c @@ -44,8 +44,6 @@ extern unsigned char workspace[]; -extern void board_init(void); - static CLzmaDecoderState lzma_state; static unsigned char *lzma_data; static unsigned long lzma_datasize; @@ -135,11 +133,10 @@ void loader_main(unsigned long reg_a0, unsigned long reg_a1, unsigned long); int res; - board_init(); - printf("\n\nOpenWrt kernel loader for BCM63XX\n"); printf("Copyright (C) 2011 Gabor Juhos \n"); printf("Copyright (C) 2014 Jonas Gorski \n"); + printf("Copyright (C) 2020 Alvaro Fernandez Rojas \n"); lzma_init_data();