From: Pawel Dembicki Date: Fri, 24 Jan 2020 06:13:24 +0000 (+0100) Subject: uboot-kirkwood: add uboot for CheckPoint L-50 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c881d7ab039022aac91a3524227df9cc5f60dd16;p=openwrt%2Fstaging%2Flynxis.git uboot-kirkwood: add uboot for CheckPoint L-50 This patch add u-boot for CheckPoint L-50 routers. Signed-off-by: Pawel Dembicki --- diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index d2cbc1041b..e1493bf0e8 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -54,6 +54,11 @@ define U-Boot/iconnect_second_stage BUILD_DEVICES:=iom_iconnect-1.1 endef +define U-Boot/l-50 + NAME:=CheckPoint L-50 + BUILD_DEVICES:=checkpoint_l-50 +endef + define U-Boot/nsa310 NAME:=Zyxel NSA310 BUILD_DEVICES:=zyxel_nsa310b @@ -89,6 +94,7 @@ UBOOT_TARGETS := \ goflexhome \ ib62x0 ib62x0_second_stage \ iconnect iconnect_second_stage \ + l-50 \ nsa310 \ nsa310s \ nsa325 \ diff --git a/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch b/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch new file mode 100644 index 0000000000..b228be6aa6 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/151-arm-kirkwood-add-CheckPoint-L-50-device.patch @@ -0,0 +1,928 @@ +From 742f780f62ace452b83e2463f1f1afdda4b724ea Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Sun, 26 Jan 2020 07:27:24 +0100 +Subject: [PATCH] arm: kirkwood: add CheckPoint L-50 device + +This patch adds support for the Check Point L-50 from 600/1100 series +routers. + +Specification: +-CPU: Marvell Kirkwood 88F6821 1200MHz +-RAM: 512MB +-Flash: NAND 512MB +-WiFi: mPCIe card based on Atheros AR9287 b/g/n +-WAN: 1 Gigabit Port (Marvell 88E1116R PHY) +-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) +-USB: 2x USB2.0 +-Express card slot +-SD card slot +-Serial console: RJ-45 115200 8n1 +-Unsupported DSL + +Known limitations: +- In board is used two switches in chain. Second Marvell is not used + in u-Boot. + +Signed-off-by: Pawel Dembicki +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/kirkwood-l-50.dts | 439 +++++++++++++++++++++++++++++ + arch/arm/mach-kirkwood/Kconfig | 4 + + board/checkpoint/l-50/Kconfig | 12 + + board/checkpoint/l-50/MAINTAINERS | 6 + + board/checkpoint/l-50/Makefile | 11 + + board/checkpoint/l-50/kwbimage.cfg | 36 +++ + board/checkpoint/l-50/l-50.c | 172 +++++++++++ + board/checkpoint/l-50/l-50.h | 29 ++ + configs/l-50_defconfig | 59 ++++ + include/configs/l-50.h | 59 ++++ + 11 files changed, 828 insertions(+) + create mode 100644 arch/arm/dts/kirkwood-l-50.dts + create mode 100644 board/checkpoint/l-50/Kconfig + create mode 100644 board/checkpoint/l-50/MAINTAINERS + create mode 100644 board/checkpoint/l-50/Makefile + create mode 100644 board/checkpoint/l-50/kwbimage.cfg + create mode 100644 board/checkpoint/l-50/l-50.c + create mode 100644 board/checkpoint/l-50/l-50.h + create mode 100644 configs/l-50_defconfig + create mode 100644 include/configs/l-50.h + +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -51,6 +51,7 @@ dtb-$(CONFIG_KIRKWOOD) += \ + kirkwood-iconnect.dtb \ + kirkwood-is2.dtb \ + kirkwood-km_kirkwood.dtb \ ++ kirkwood-l-50.dtb \ + kirkwood-lsxhl.dtb \ + kirkwood-lschlv2.dtb \ + kirkwood-net2big.dtb \ +--- /dev/null ++++ b/arch/arm/dts/kirkwood-l-50.dts +@@ -0,0 +1,439 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Check Point L-50 Board Description ++ * Copyright 2020 Pawel Dembicki ++ */ ++ ++/dts-v1/; ++ ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" ++ ++/ { ++ model = "Check Point L-50"; ++ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x20000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200n8"; ++ stdout-path = &uart0; ++ }; ++ ++ ocp@f1000000 { ++ pinctrl: pin-controller@10000 { ++ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; ++ pinctrl-names = "default"; ++ ++ pmx_sysrst: pmx-sysrst { ++ marvell,pins = "mpp6"; ++ marvell,function = "sysrst"; ++ }; ++ ++ pmx_button29: pmx_button29 { ++ marvell,pins = "mpp29"; ++ marvell,function = "gpio"; ++ }; ++ ++ pmx_led38: pmx_led38 { ++ marvell,pins = "mpp38"; ++ marvell,function = "gpio"; ++ }; ++ ++ pmx_sdio_cd: pmx-sdio-cd { ++ marvell,pins = "mpp46"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ ++ serial@12000 { ++ status = "okay"; ++ }; ++ ++ mvsdio@90000 { ++ status = "okay"; ++ cd-gpios = <&gpio1 14 9>; ++ }; ++ ++ i2c@11000 { ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ gpio2: gpio-expander@20{ ++ #gpio-cells = <2>; ++ #interrupt-cells = <2>; ++ compatible = "semtech,sx1505q"; ++ reg = <0x20>; ++ ++ gpio-controller; ++ }; ++ ++ /* Three GPIOs from 0x21 exp. are undescribed in dts: ++ * 1: DSL module reset (active low) ++ * 5: mPCIE reset (active low) ++ * 6: Express card reset (active low) ++ */ ++ gpio3: gpio-expander@21{ ++ #gpio-cells = <2>; ++ #interrupt-cells = <2>; ++ compatible = "semtech,sx1505q"; ++ reg = <0x21>; ++ ++ gpio-controller; ++ }; ++ ++ rtc@30 { ++ compatible = "s35390a"; ++ reg = <0x30>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ status_green { ++ label = "l-50:green:status"; ++ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; ++ }; ++ ++ status_red { ++ label = "l-50:red:status"; ++ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi { ++ label = "l-50:green:wifi"; ++ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "phy0tpt"; ++ }; ++ ++ internet_green { ++ label = "l-50:green:internet"; ++ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ internet_red { ++ label = "l-50:red:internet"; ++ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ usb1_green { ++ label = "l-50:green:usb1"; ++ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "usbport"; ++ trigger-sources = <&hub_port3>; ++ }; ++ ++ usb1_red { ++ label = "l-50:red:usb1"; ++ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ usb2_green { ++ label = "l-50:green:usb2"; ++ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "usbport"; ++ trigger-sources = <&hub_port1>; ++ }; ++ ++ usb2_red { ++ label = "l-50:red:usb2"; ++ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ usb2_pwr { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb2_pwr"; ++ ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; ++ regulator-always-on; ++ }; ++ ++ usb1_pwr { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb1_pwr"; ++ ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; ++ regulator-always-on; ++ }; ++ ++ mpcie_pwr { ++ compatible = "regulator-fixed"; ++ regulator-name = "mpcie_pwr"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ express_card_pwr { ++ compatible = "regulator-fixed"; ++ regulator-name = "express_card_pwr"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ factory_defaults { ++ label = "factory_defaults"; ++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ }; ++ }; ++}; ++ ++&mdio { ++ status = "okay"; ++ ++ ethphy8: ethernet-phy@8 { ++ reg = <0x08>; ++ }; ++ ++ switch0: switch@10 { ++ compatible = "marvell,mv88e6085"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x10>; ++ dsa,member = <0 0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan5"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan6"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan2"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan7"; ++ }; ++ ++ switch0port5: port@5 { ++ reg = <5>; ++ phy-mode = "rgmii-txid"; ++ link = <&switch1port5>; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@6 { ++ reg = <6>; ++ label = "cpu"; ++ phy-mode = "rgmii-id"; ++ ethernet = <ð1port>; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++ ++ switch@11 { ++ compatible = "marvell,mv88e6085"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x11>; ++ dsa,member = <0 1>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan3"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan8"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan4"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "dmz"; ++ }; ++ ++ switch1port5: port@5 { ++ reg = <5>; ++ phy-mode = "rgmii-txid"; ++ link = <&switch0port5>; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@6 { ++ reg = <6>; ++ label = "dsl"; ++ fixed-link { ++ speed = <100>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ethernet0-port@0 { ++ phy-handle = <ðphy8>; ++ }; ++}; ++ ++ð1 { ++ status = "okay"; ++ ethernet1-port@0 { ++ speed = <1000>; ++ duplex = <1>; ++ phy-handle = <&switch0>; ++ }; ++}; ++ ++&nand { ++ status = "okay"; ++ pinctrl-0 = <&pmx_nand>; ++ pinctrl-names = "default"; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x00000000 0x000c0000>; ++ }; ++ ++ partition@a0000 { ++ label = "bootldr-env"; ++ reg = <0x000c0000 0x00040000>; ++ }; ++ ++ partition@100000 { ++ label = "kernel-1"; ++ reg = <0x00100000 0x00800000>; ++ }; ++ ++ partition@900000 { ++ label = "rootfs-1"; ++ reg = <0x00900000 0x07100000>; ++ }; ++ ++ partition@7a00000 { ++ label = "kernel-2"; ++ reg = <0x07a00000 0x00800000>; ++ }; ++ ++ partition@8200000 { ++ label = "rootfs-2"; ++ reg = <0x08200000 0x07100000>; ++ }; ++ ++ partition@f300000 { ++ label = "default_sw"; ++ reg = <0x0f300000 0x07900000>; ++ }; ++ ++ partition@16c00000 { ++ label = "logs"; ++ reg = <0x16c00000 0x01800000>; ++ }; ++ ++ partition@18400000 { ++ label = "preset_cfg"; ++ reg = <0x18400000 0x00100000>; ++ }; ++ ++ partition@18500000 { ++ label = "adsl"; ++ reg = <0x18500000 0x00100000>; ++ }; ++ ++ partition@18600000 { ++ label = "storage"; ++ reg = <0x18600000 0x07a00000>; ++ }; ++}; ++ ++&rtc { ++ status = "disabled"; ++}; ++ ++&pciec { ++ status = "okay"; ++}; ++ ++&pcie0 { ++ status = "okay"; ++}; ++ ++&sata_phy0 { ++ status = "disabled"; ++}; ++ ++&sata_phy1 { ++ status = "disabled"; ++}; ++ ++&usb0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ port@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ ++ hub_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ ++ hub_port3: port@3 { ++ reg = <3>; ++ #trigger-source-cells = <0>; ++ }; ++ }; ++}; +--- a/arch/arm/mach-kirkwood/Kconfig ++++ b/arch/arm/mach-kirkwood/Kconfig +@@ -74,6 +74,9 @@ config TARGET_DB_88F6281_BP + config TARGET_NSA325 + bool "Zyxel NSA325 board" + ++config TARGET_L50 ++ bool "Check Point L-50" ++ + endchoice + + config SYS_SOC +@@ -102,5 +105,6 @@ source "board/zyxel/nsa325/Kconfig" + source "board/alliedtelesis/SBx81LIFKW/Kconfig" + source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" + source "board/Marvell/db-88f6281-bp/Kconfig" ++source "board/checkpoint/l-50/Kconfig" + + endif +--- /dev/null ++++ b/board/checkpoint/l-50/Kconfig +@@ -0,0 +1,12 @@ ++if TARGET_L50 ++ ++config SYS_BOARD ++ default "l-50" ++ ++config SYS_VENDOR ++ default "checkpoint" ++ ++config SYS_CONFIG_NAME ++ default "l-50" ++ ++endif +--- /dev/null ++++ b/board/checkpoint/l-50/MAINTAINERS +@@ -0,0 +1,6 @@ ++L50 BOARD ++M: Pawel Dembicki ++S: Maintained ++F: board/checkpoint/l-50/ ++F: include/configs/l-50.h ++F: configs/l-50_defconfig +--- /dev/null ++++ b/board/checkpoint/l-50/Makefile +@@ -0,0 +1,11 @@ ++# SPDX-License-Identifier: GPL-2.0+ ++# ++# (C) Copyright 2020 ++# Pawel Dembicki ++# ++# Based on Kirkwood support: ++# (C) Copyright 2009 ++# Marvell Semiconductor ++# Written-by: Prafulla Wadaskar ++ ++obj-y := l-50.o +--- /dev/null ++++ b/board/checkpoint/l-50/kwbimage.cfg +@@ -0,0 +1,36 @@ ++# SPDX-License-Identifier: GPL-2.0+ ++# ++# Values taken from original bootloader source. ++# Based on: ++# dramregs_seattle_400rd_A.txt from uboot_src_CP600_1100. ++ ++# Boot Media configurations ++BOOT_FROM nand ++NAND_ECC_MODE default ++NAND_PAGE_SIZE 0x0800 ++ ++DATA 0xFFD100e0 0x1b1b1b9b ++DATA 0xFFD01400 0x43000c30 ++DATA 0xFFD01404 0x39543000 ++DATA 0xFFD01408 0x22125451 ++DATA 0xFFD0140C 0x00000833 ++DATA 0xFFD01410 0x000000cc ++DATA 0xFFD01414 0x00000000 ++DATA 0xFFD01418 0x00000000 ++DATA 0xFFD0141C 0x00000C52 ++DATA 0xFFD01420 0x00000004 ++DATA 0xFFD01424 0x0000F17F ++DATA 0xFFD01428 0x00085520 ++DATA 0xFFD0147C 0x00008552 ++DATA 0xFFD01504 0x0FFFFFF1 ++DATA 0xFFD01508 0x10000000 ++DATA 0xFFD0150C 0x0FFFFFF5 ++DATA 0xFFD01514 0x00000000 ++DATA 0xFFD0151C 0x00000000 ++DATA 0xFFD01494 0x00120012 ++DATA 0xFFD01498 0x00000000 ++DATA 0xFFD0149C 0x0000E40F ++DATA 0xFFD01480 0x00000001 ++DATA 0xFFD20134 0x66666666 ++DATA 0xFFD20138 0x66666666 ++DATA 0x0 0x0 +--- /dev/null ++++ b/board/checkpoint/l-50/l-50.c +@@ -0,0 +1,172 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Copyright (C) 2020 ++ * Pawel Dembicki ++ * ++ * Based on Kirkwood support: ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "l-50.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int board_early_init_f(void) ++{ ++ /* Gpio configuration */ ++ mvebu_config_gpio(L50_OE_VAL_LOW, L50_OE_VAL_HIGH, ++ L50_OE_LOW, L50_OE_HIGH); ++ ++ /* Multi-Purpose Pins Functionality configuration */ ++ static const u32 kwmpp_config[] = { ++ MPP0_NF_IO2, ++ MPP1_NF_IO3, ++ MPP2_NF_IO4, ++ MPP3_NF_IO5, ++ MPP4_NF_IO6, ++ MPP5_NF_IO7, ++ MPP6_SYSRST_OUTn, ++ MPP7_SPI_SCn, ++ MPP8_TW_SDA, ++ MPP9_TW_SCK, ++ MPP10_UART0_TXD, ++ MPP11_UART0_RXD, ++ MPP12_SD_CLK, ++ MPP13_SD_CMD, ++ MPP14_SD_D0, ++ MPP15_SD_D1, ++ MPP16_SD_D2, ++ MPP17_SD_D3, ++ MPP18_NF_IO0, ++ MPP19_NF_IO1, ++ MPP20_GE1_0, ++ MPP21_GE1_1, ++ MPP22_GE1_2, ++ MPP23_GE1_3, ++ MPP24_GE1_4, ++ MPP25_GE1_5, ++ MPP26_GE1_6, ++ MPP27_GE1_7, ++ MPP28_GPIO, ++ MPP29_GPIO, ++ MPP30_GE1_10, ++ MPP31_GE1_11, ++ MPP32_GE1_12, ++ MPP33_GE1_13, ++ MPP34_GPIO, ++ MPP35_GPIO, ++ MPP36_AUDIO_SPDIFI, /* value from stock u-boot */ ++ MPP37_GPIO, ++ MPP38_GPIO, ++ MPP39_TDM_SPI_CS0, ++ MPP40_GPIO, ++ MPP41_GPIO, ++ MPP42_TDM_SPI_MOSI, ++ MPP43_TDM_CODEC_INTn, ++ MPP44_GPIO, ++ MPP45_TDM_PCLK, ++ MPP46_GPIO, ++ MPP47_TDM_DRX, ++ MPP48_GPIO, ++ MPP49_GPIO, ++ 0 ++ }; ++ kirkwood_mpp_conf(kwmpp_config, NULL); ++ ++ return 0; ++} ++ ++void board_gpio_expander_init(void) ++{ ++ struct udevice *dev0, *dev1; ++ uchar data_buffer; ++ int ret; ++ ++ ret = i2c_get_chip_for_busnum(0, L50_GPIO0_I2C_ADDRESS, 1, &dev0); ++ if (ret) { ++ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n", ++ __func__, L50_GPIO0_I2C_ADDRESS); ++ return; ++ } ++ ++ ret = i2c_get_chip_for_busnum(0, L50_GPIO1_I2C_ADDRESS, 1, &dev1); ++ if (ret) { ++ debug("%s: Cannot find I2C GPIO expander chip 0x02%X\n", ++ __func__, L50_GPIO1_I2C_ADDRESS); ++ return; ++ } ++ ++ /* Set IO as output */ ++ data_buffer = 0x0; ++ dm_i2c_write(dev0, 1, &data_buffer, 1); ++ dm_i2c_write(dev1, 1, &data_buffer, 1); ++ ++ /* Set all leds off, reset asserted, pwr off */ ++ data_buffer = 0xbf; ++ dm_i2c_write(dev0, 0, &data_buffer, 1); ++ data_buffer = 0x1c; ++ dm_i2c_write(dev1, 0, &data_buffer, 1); ++ ++ mdelay(100); ++ ++ /* Set pwr on */ ++ data_buffer = 0xa5; ++ dm_i2c_write(dev1, 0, &data_buffer, 1); ++ ++ mdelay(100); ++ ++ /* Set reset deasserted, status red led enabled*/ ++ data_buffer = 0xff; ++ dm_i2c_write(dev0, 0, &data_buffer, 1); ++ data_buffer = 0xe3; ++ dm_i2c_write(dev1, 0, &data_buffer, 1); ++} ++ ++int board_init(void) ++{ ++ /* Boot parameters address */ ++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; ++ ++ board_gpio_expander_init(); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++/* Configure and initialize PHY */ ++void reset_phy(void) ++{ ++ u16 devadr; ++ char *name = "ethernet-controller@72000"; ++ ++ if (miiphy_set_current_dev(name)) ++ return; ++ ++ /* command to read PHY dev address */ ++ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) { ++ printf("Err..(%s) could not read PHY dev address\n", __func__); ++ return; ++ } ++ ++ /* ++ * Fix PHY led configuration ++ */ ++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 3); ++ miiphy_write(name, devadr, 0x10, 0x1177); ++ miiphy_write(name, devadr, 0x11, 0x4417); ++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); ++ ++ debug("88E1116 Initialized on %s\n", name); ++} ++#endif /* CONFIG_RESET_PHY_R */ +--- /dev/null ++++ b/board/checkpoint/l-50/l-50.h +@@ -0,0 +1,29 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++/* ++ * Copyright (C) 2020 ++ * Pawel Dembicki ++ * ++ * Based on Kirkwood support: ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ */ ++ ++#ifndef __L50_H ++#define __L50_H ++ ++/* GPIO configuration */ ++#define L50_OE_LOW 0x30000000 ++#define L50_OE_HIGH 0x0000004c ++#define L50_OE_VAL_LOW 0x00000000 ++#define L50_OE_VAL_HIGH 0x00000000 ++ ++/* Expander GPIO addresses */ ++ ++#define L50_GPIO0_I2C_ADDRESS 0x20 ++#define L50_GPIO1_I2C_ADDRESS 0x21 ++ ++/* PHY register */ ++#define MV88E1116_PGADR_REG 22 ++ ++#endif /* __L50_H */ +--- /dev/null ++++ b/configs/l-50_defconfig +@@ -0,0 +1,59 @@ ++CONFIG_ARM=y ++CONFIG_SYS_DCACHE_OFF=y ++CONFIG_ARCH_CPU_INIT=y ++CONFIG_KIRKWOOD=y ++CONFIG_SYS_TEXT_BASE=0x600000 ++CONFIG_TARGET_L50=y ++CONFIG_ENV_SIZE=0x20000 ++CONFIG_ENV_OFFSET=0xC0000 ++CONFIG_ENV_SECT_SIZE=0x20000 ++CONFIG_ENV_ADDR=0xC0000 ++CONFIG_IDENT_STRING="\nCheck Point L-50" ++CONFIG_NR_DRAM_BANKS=2 ++# CONFIG_SYS_MALLOC_F is not set ++CONFIG_BOOTDELAY=1 ++CONFIG_CONSOLE_MUX=y ++CONFIG_DISPLAY_BOARDINFO=y ++CONFIG_HUSH_PARSER=y ++# CONFIG_CMD_FLASH is not set ++#CONFIG_CMD_IDE=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_USB=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_MII=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_EXT2=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_JFFS2=y ++CONFIG_CMD_MTDPARTS=y ++CONFIG_MTD=y ++CONFIG_MTD_RAW_NAND=y ++CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" ++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xc0000@0x0(u-boot)ro,0x40000@0xc0000(bootldr-env),0x7900000@0x100000(ubi),0x800000@0x7a00000(kernel-2),0x7100000@0x8200000(rootfs-2),0x7900000@0xf300000(default_sw),0x1800000@0x16c00000(logs),0x100000@0x18400000(preset_cfg),0x100000@0x18500000(adsl),-@0x18600000(storage)" ++CONFIG_CMD_UBI=y ++CONFIG_ISO_PARTITION=y ++CONFIG_OF_CONTROL=y ++CONFIG_DEFAULT_DEVICE_TREE="kirkwood-l-50" ++CONFIG_ENV_IS_IN_NAND=y ++CONFIG_DM=y ++CONFIG_DM_ETH=y ++#CONFIG_MVSATA_IDE=y ++CONFIG_MMC=y ++CONFIG_MVGBE=y ++CONFIG_MII=y ++CONFIG_PHYLIB=y ++CONFIG_PHY_MARVELL=y ++CONFIG_MV88E61XX_SWITCH=y ++CONFIG_MV88E61XX_CPU_PORT=6 ++CONFIG_MV88E61XX_PHY_PORTS=0x01f ++CONFIG_MV88E61XX_FIXED_PORTS=0 ++#CONFIG_DM_RTC=y ++#CONFIG_RTC_MV=y ++CONFIG_SYS_NS16550=y ++CONFIG_DM_I2C=y ++CONFIG_SYS_I2C_MVTWSI=y ++CONFIG_USB=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_STORAGE=y +--- /dev/null ++++ b/include/configs/l-50.h +@@ -0,0 +1,59 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++/* ++ * Copyright (C) 2020 ++ * Pawel Dembicki ++ * ++ * Based on Kirkwood support: ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ */ ++ ++#ifndef _CONFIG_L50_H ++#define _CONFIG_L50_H ++ ++/* ++ * High Level Configuration Options (easy to change) ++ */ ++#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ ++#define CONFIG_KW88F6281 /* SOC Name */ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ ++ ++/* ++ * mv-common.h should be defined after CMD configs since it used them ++ * to enable certain macros ++ */ ++#include "mv-common.h" ++ ++/* Remove or override few declarations from mv-common.h */ ++ ++/* ++ * Ethernet Driver configuration ++ */ ++#ifdef CONFIG_CMD_NET ++#define CONFIG_MVGBE_PORTS {1, 1} /* enable port 0 only */ ++#define CONFIG_NETCONSOLE ++#endif ++ ++#define CONFIG_MV88E61XX_CPU_PORT_RX_DELAY ++#define CONFIG_MV88E61XX_CPU_PORT_TX_DELAY ++ ++/* ++ * Enable GPI0 support ++ */ ++#define CONFIG_KIRKWOOD_GPIO ++ ++/* ++ * Default environment variables ++ */ ++#define CONFIG_BOOTCOMMAND \ ++ "ubi part ubi; " \ ++ "ubi read 0x800000 kernel; " \ ++ "bootm 0x800000" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "bootargs=console=ttyS0,115200\0" \ ++ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ ++ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ ++ "bootargs_root=\0" ++#endif /* _CONFIG_L50_H */ diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch index c7c811cee1..83eb0f9d2c 100644 --- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch +++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch @@ -1,8 +1,8 @@ --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig -@@ -103,4 +103,7 @@ source "board/alliedtelesis/SBx81LIFKW/K - source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" +@@ -107,4 +107,7 @@ source "board/alliedtelesis/SBx81LIFXCAT source "board/Marvell/db-88f6281-bp/Kconfig" + source "board/checkpoint/l-50/Kconfig" +config SECOND_STAGE + bool "OpenWrt second stage hack" @@ -35,6 +35,17 @@ +#include "openwrt-kirkwood-common.h" + #endif /* _CONFIG_ICONNECT_H */ +--- a/include/configs/l-50.h ++++ b/include/configs/l-50.h +@@ -12,6 +12,8 @@ + #ifndef _CONFIG_L50_H + #define _CONFIG_L50_H + ++#include "openwrt-kirkwood-common.h" ++ + /* + * High Level Configuration Options (easy to change) + */ --- /dev/null +++ b/include/configs/openwrt-kirkwood-common.h @@ -0,0 +1,31 @@ @@ -139,6 +150,17 @@ +CONFIG_FIT_VERBOSE=y CONFIG_LZMA=y +CONFIG_LZO=y +--- a/configs/l-50_defconfig ++++ b/configs/l-50_defconfig +@@ -57,3 +57,8 @@ CONFIG_SYS_I2C_MVTWSI=y + CONFIG_USB=y + CONFIG_USB_EHCI_HCD=y + CONFIG_USB_STORAGE=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_LZMA=y ++CONFIG_LZO=y --- a/configs/nsa310_defconfig +++ b/configs/nsa310_defconfig @@ -43,6 +43,9 @@ CONFIG_CMD_UBI=y diff --git a/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch b/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch new file mode 100644 index 0000000000..6e358857b7 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch @@ -0,0 +1,53 @@ +From 940e9a5828480e4185c9a276ad7f35a4069a2393 Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Thu, 23 Jan 2020 22:04:15 +0100 +Subject: [PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay + +Clock delay in RGMII is required for some boards. +This patch introduce CONFIG_MV88E61XX_CPU_PORT_TX_DELAY and +CONFIG_MV88E61XX_CPU_PORT_RX_DELAY defines, which are setting +proper bits in PORT_REG_PHYS_CTRL register. + +Cc: Chris Packham +Cc: Joe Hershberger +Cc: Anatolij Gustschin +Cc: Tim Harvey +Signed-off-by: Pawel Dembicki +--- + drivers/net/phy/mv88e61xx.c | 11 ++++++++++- + 1 file changed, 10 insertions(+), 1 deletion(-) + +diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c +index 5aff7ed397..889327639d 100644 +--- a/drivers/net/phy/mv88e61xx.c ++++ b/drivers/net/phy/mv88e61xx.c +@@ -94,6 +94,8 @@ + #define PORT_REG_STATUS_CMODE_1000BASE_X 0x9 + #define PORT_REG_STATUS_CMODE_SGMII 0xa + ++#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY BIT(15) ++#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY BIT(14) + #define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10) + #define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9) + #define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7) +@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port) + PORT_REG_PHYS_CTRL_SPD1000; + } + +- if (port == CONFIG_MV88E61XX_CPU_PORT) ++ if (port == CONFIG_MV88E61XX_CPU_PORT) { + val |= PORT_REG_PHYS_CTRL_LINK_VALUE | + PORT_REG_PHYS_CTRL_LINK_FORCE; ++#if defined(CONFIG_MV88E61XX_CPU_PORT_RX_DELAY) ++ val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY; ++#endif ++#if defined(CONFIG_MV88E61XX_CPU_PORT_TX_DELAY) ++ val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY; ++#endif ++ } + + return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL, + val); +-- +2.20.1 + diff --git a/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch b/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch new file mode 100644 index 0000000000..c91a06cbed --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/702-phy-mv88e61xx-add-support-for-MV88E6171.patch @@ -0,0 +1,67 @@ +From 7ffab66a99831ce5e3037b608d73565c9d1abd20 Mon Sep 17 00:00:00 2001 +From: Pawel Dembicki +Date: Thu, 23 Jan 2020 22:09:51 +0100 +Subject: [PATCH 2/2] phy: mv88e61xx: add support for MV88E6171 + +This patch add MV88E6171 id to driver data. + +Tested on Checkpoint L-50 board. + +Cc: Chris Packham +Cc: Joe Hershberger +Cc: Anatolij Gustschin +Cc: Tim Harvey +Signed-off-by: Pawel Dembicki +--- + drivers/net/phy/mv88e61xx.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c +index 889327639d..e0b648a54e 100644 +--- a/drivers/net/phy/mv88e61xx.c ++++ b/drivers/net/phy/mv88e61xx.c +@@ -180,6 +180,7 @@ + #define PORT_SWITCH_ID_6071 0x0710 + #define PORT_SWITCH_ID_6096 0x0980 + #define PORT_SWITCH_ID_6097 0x0990 ++#define PORT_SWITCH_ID_6171 0x1710 + #define PORT_SWITCH_ID_6172 0x1720 + #define PORT_SWITCH_ID_6176 0x1760 + #define PORT_SWITCH_ID_6220 0x2200 +@@ -997,6 +998,7 @@ static int mv88e61xx_probe(struct phy_device *phydev) + switch (priv->id) { + case PORT_SWITCH_ID_6096: + case PORT_SWITCH_ID_6097: ++ case PORT_SWITCH_ID_6171: + case PORT_SWITCH_ID_6172: + case PORT_SWITCH_ID_6176: + case PORT_SWITCH_ID_6240: +@@ -1152,6 +1154,17 @@ static struct phy_driver mv88e61xx_driver = { + .shutdown = &genphy_shutdown, + }; + ++static struct phy_driver mv88e617x_driver = { ++ .name = "Marvell MV88E617x", ++ .uid = 0x01410e70, ++ .mask = 0xfffffff0, ++ .features = PHY_GBIT_FEATURES, ++ .probe = mv88e61xx_probe, ++ .config = mv88e61xx_phy_config, ++ .startup = mv88e61xx_phy_startup, ++ .shutdown = &genphy_shutdown, ++}; ++ + static struct phy_driver mv88e609x_driver = { + .name = "Marvell MV88E609x", + .uid = 0x1410c89, +@@ -1177,6 +1190,7 @@ static struct phy_driver mv88e6071_driver = { + int phy_mv88e61xx_init(void) + { + phy_register(&mv88e61xx_driver); ++ phy_register(&mv88e617x_driver); + phy_register(&mv88e609x_driver); + phy_register(&mv88e6071_driver); + +-- +2.20.1 +