From: Piotr Dymacz Date: Mon, 23 Oct 2017 11:30:20 +0000 (+0200) Subject: ar71xx: add support for Wallys DR342 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c83bdd094ec4722b35811bd64781d8aacddb2344;p=openwrt%2Fstaging%2Fzorun.git ar71xx: add support for Wallys DR342 Wallys DR342 is a 5 GHz, 2T2R AP/CPE board based on Atheros AR9342. Short specification: - 560/450/225 MHz (CPU/DDR/AHB) - 1x Gbps Ethernet (AR8035) with passive PoE support (24-56 V) - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 5 GHz with external FEM (SKY85728-11), up to 30 dBm - 2x MMCX connectors - miniPCIe connector with PCIe and USB 2.0 buses - optional miniSIM slot - 7x LED, 1x button - UART, (E)JTAG and LED headers - 1x DC jack for main power (12-56 V) Flash instruction (do it under U-Boot, using UART): 1. tftp 0x82000000 lede-ar71xx-generic-dr342-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index e5a943374f..78e04627ac 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -70,6 +70,7 @@ ar71xx_setup_interfaces() cap4200ag|\ cf-e380ac-v1|\ cf-e380ac-v2|\ + dr342|\ eap120|\ eap300v2|\ eap7660d|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 5ef620b861..42edd0233b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -38,6 +38,7 @@ get_status_led() { ap531b0|\ cpe505n|\ db120|\ + dr342|\ dr344|\ tew-632brp|\ tl-wr942n-v1|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 99035632e6..fd3f94d220 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -603,6 +603,9 @@ ar71xx_board_detect() { *"Domino Pi") name="gl-domino" ;; + *"DR342") + name="dr342" + ;; *"DR344") name="dr344" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 18e5e41dd0..c798ebe843 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -238,6 +238,7 @@ platform_check_image() { dlan-hotspot|\ dlan-pro-1200-ac|\ dlan-pro-500-wp|\ + dr342|\ dr531|\ dragino2|\ ebr-2310-c1|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 4793bf4deb..200a592940 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -95,6 +95,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y # CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set +CONFIG_ATH79_MACH_DR342=y CONFIG_ATH79_MACH_DR344=y CONFIG_ATH79_MACH_DR531=y CONFIG_ATH79_MACH_DRAGINO2=y diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 84b2a0b72b..78668e0949 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -93,6 +93,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y # CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set +CONFIG_ATH79_MACH_DR342=y CONFIG_ATH79_MACH_DR344=y CONFIG_ATH79_MACH_DR531=y CONFIG_ATH79_MACH_DRAGINO2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 8facdd2b74..453893a62e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -638,9 +638,21 @@ config ATH79_MACH_DOMYWIFI_DW33D select ATH79_DEV_WMAC select ATH79_DEV_USB +config ATH79_MACH_DR342 + bool "Wallys DR342 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_DR344 bool "Wallys DR344 board support" select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 7d12282baa..529e0b81b1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o obj-$(CONFIG_ATH79_MACH_DOMYWIFI_DW33D) += mach-domywifi-dw33d.o +obj-$(CONFIG_ATH79_MACH_DR342) += mach-dr344.o obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c index 42839271d9..870adbe083 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c @@ -1,9 +1,10 @@ /* - * Wallys DR344 board support + * Wallys DR342/DR344 boards support * * Copyright (c) 2011 Qualcomm Atheros * Copyright (c) 2011-2012 Gabor Juhos * Copyright (c) 2015 Philippe Duchein + * Copyright (c) 2017 Piotr Dymacz * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -39,24 +40,51 @@ #include "dev-wmac.h" #include "machtypes.h" -#define DR344_GPIO_LED_SIG1 12 -#define DR344_GPIO_LED_SIG2 13 -#define DR344_GPIO_LED_SIG3 14 -#define DR344_GPIO_LED_SIG4 15 -#define DR344_GPIO_LED_STATUS 11 +#define DR34X_GPIO_LED_SIG1 12 +#define DR34X_GPIO_LED_SIG2 13 +#define DR34X_GPIO_LED_SIG3 14 +#define DR34X_GPIO_LED_SIG4 15 +#define DR34X_GPIO_LED_STATUS 11 #define DR344_GPIO_LED_LAN 17 #define DR344_GPIO_EXTERNAL_LNA0 18 #define DR344_GPIO_EXTERNAL_LNA1 19 -#define DR344_GPIO_BTN_RESET 16 +#define DR34X_GPIO_BTN_RESET 16 #define DR344_KEYS_POLL_INTERVAL 20 /* msecs */ #define DR344_KEYS_DEBOUNCE_INTERVAL (3 * DR344_KEYS_POLL_INTERVAL) -#define DR344_MAC0_OFFSET 0 -#define DR344_MAC1_OFFSET 8 -#define DR344_WMAC_CALDATA_OFFSET 0x1000 -#define DR344_PCIE_CALDATA_OFFSET 0x5000 +#define DR34X_MAC0_OFFSET 0 +#define DR34X_MAC1_OFFSET 8 +#define DR34X_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led dr342_leds_gpio[] __initdata = { + { + .name = "dr342:green:status", + .gpio = DR34X_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "dr342:green:sig1", + .gpio = DR34X_GPIO_LED_SIG1, + .active_low = 1, + }, + { + .name = "dr342:green:sig2", + .gpio = DR34X_GPIO_LED_SIG2, + .active_low = 1, + }, + { + .name = "dr342:green:sig3", + .gpio = DR34X_GPIO_LED_SIG3, + .active_low = 1, + }, + { + .name = "dr342:green:sig4", + .gpio = DR34X_GPIO_LED_SIG4, + .active_low = 1, + } +}; static struct gpio_led dr344_leds_gpio[] __initdata = { { @@ -66,96 +94,82 @@ static struct gpio_led dr344_leds_gpio[] __initdata = { }, { .name = "dr344:green:status", - .gpio = DR344_GPIO_LED_STATUS, + .gpio = DR34X_GPIO_LED_STATUS, .active_low = 1, }, { .name = "dr344:green:sig1", - .gpio = DR344_GPIO_LED_SIG1, + .gpio = DR34X_GPIO_LED_SIG1, .active_low = 1, }, { .name = "dr344:green:sig2", - .gpio = DR344_GPIO_LED_SIG2, + .gpio = DR34X_GPIO_LED_SIG2, .active_low = 1, }, { .name = "dr344:green:sig3", - .gpio = DR344_GPIO_LED_SIG3, + .gpio = DR34X_GPIO_LED_SIG3, .active_low = 1, }, { .name = "dr344:green:sig4", - .gpio = DR344_GPIO_LED_SIG4, + .gpio = DR34X_GPIO_LED_SIG4, .active_low = 1, } }; -static struct gpio_keys_button dr344_gpio_keys[] __initdata = { +static struct gpio_keys_button dr34x_gpio_keys[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = KEY_RESTART, .debounce_interval = DR344_KEYS_DEBOUNCE_INTERVAL, - .gpio = DR344_GPIO_BTN_RESET, + .gpio = DR34X_GPIO_BTN_RESET, .active_low = 1, }, }; -static struct at803x_platform_data dr344_at803x_data = { +static struct at803x_platform_data dr34x_at803x_data = { .disable_smarteee = 1, .enable_rgmii_rx_delay = 1, .enable_rgmii_tx_delay = 1, }; -static struct mdio_board_info dr344_mdio0_info[] = { +static struct mdio_board_info dr34x_mdio0_info[] = { { .bus_id = "ag71xx-mdio.0", .phy_addr = 0, - .platform_data = &dr344_at803x_data, + .platform_data = &dr34x_at803x_data, }, }; -static void __init dr344_setup(void) +static void __init dr34x_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); ath79_register_m25p80(NULL); - ath79_gpio_direction_select(DR344_GPIO_LED_STATUS, true); - gpio_set_value(DR344_GPIO_LED_STATUS, 1); - ath79_gpio_output_select(DR344_GPIO_LED_STATUS, 0); - - ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true); - gpio_set_value(DR344_GPIO_LED_LAN, 1); - ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0); + ath79_gpio_direction_select(DR34X_GPIO_LED_STATUS, true); + gpio_set_value(DR34X_GPIO_LED_STATUS, 1); + ath79_gpio_output_select(DR34X_GPIO_LED_STATUS, 0); - ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio), - dr344_leds_gpio); ath79_register_gpio_keys_polled(-1, DR344_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dr344_gpio_keys), - dr344_gpio_keys); + ARRAY_SIZE(dr34x_gpio_keys), + dr34x_gpio_keys); ath79_register_usb(); - ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0); - - ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1); - - ath79_register_wmac(art + DR344_WMAC_CALDATA_OFFSET, NULL); + ath79_register_wmac(art + DR34X_WMAC_CALDATA_OFFSET, NULL); ath79_register_pci(); - mdiobus_register_board_info(dr344_mdio0_info, - ARRAY_SIZE(dr344_mdio0_info)); + mdiobus_register_board_info(dr34x_mdio0_info, + ARRAY_SIZE(dr34x_mdio0_info)); - ath79_register_mdio(1, 0x0); ath79_register_mdio(0, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR344_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR344_MAC1_OFFSET, 0); - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); @@ -167,13 +181,44 @@ static void __init dr344_setup(void) ath79_eth0_pll_data.pll_100 = 0x0101; ath79_eth0_pll_data.pll_10 = 0x1313; + ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR34X_MAC0_OFFSET, 0); + ath79_register_eth(0); +} + +static void __init dr342_setup(void) +{ + dr34x_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dr342_leds_gpio), + dr342_leds_gpio); +} + +static void __init dr344_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); + + dr34x_setup(); + + ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true); + gpio_set_value(DR344_GPIO_LED_LAN, 1); + ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio), + dr344_leds_gpio); + + ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0); + ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1); + + ath79_register_mdio(1, 0x0); + /* GMAC1 is connected to the internal switch */ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ath79_eth1_data.speed = SPEED_1000; ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR34X_MAC1_OFFSET, 0); ath79_register_eth(1); } +MIPS_MACHINE(ATH79_MACH_DR342, "DR342", "Wallys DR342", dr342_setup); MIPS_MACHINE(ATH79_MACH_DR344, "DR344", "Wallys DR344", dr344_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 01472b679f..ce878b291b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -92,6 +92,7 @@ enum ath79_mach_type { ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ ATH79_MACH_DOMYWIFI_DW33D, /* DomyWifi DW33D */ + ATH79_MACH_DR342, /* Wallys DR342 */ ATH79_MACH_DR344, /* Wallys DR344 */ ATH79_MACH_DR531, /* Wallys DR531 */ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 3c5fcc3f3c..eb6d6e5342 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -349,6 +349,15 @@ define Device/mr16 endef TARGET_DEVICES += mr12 mr16 +define Device/dr342 + DEVICE_TITLE := Wallys DR342 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig + BOARDNAME := DR342 + IMAGE_SIZE := 16000k + MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += dr342 + define Device/dr344 DEVICE_TITLE := Wallys DR344 BOARDNAME := DR344 diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 42f9882bb2..942f625469 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -59,6 +59,7 @@ # CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set # CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set # CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set +# CONFIG_ATH79_MACH_DR342 is not set # CONFIG_ATH79_MACH_DR344 is not set # CONFIG_ATH79_MACH_DR531 is not set # CONFIG_ATH79_MACH_DRAGINO2 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 340d64cab9..c1dd3dcbe5 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -60,6 +60,7 @@ CONFIG_ATH79_MACH_C60=y # CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set # CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y +# CONFIG_ATH79_MACH_DR342 is not set # CONFIG_ATH79_MACH_DR344 is not set # CONFIG_ATH79_MACH_DR531 is not set # CONFIG_ATH79_MACH_DRAGINO2 is not set