From: Weiping Yang Date: Thu, 21 Sep 2023 02:17:32 +0000 (+0800) Subject: ath79: add support for GL.iNet GL-S200 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c7baca3bb6a85d3fff07aa17ebbe249a872a4daa;p=openwrt%2Fopenwrt.git ath79: add support for GL.iNet GL-S200 Specifications: SoC: QCA9531(650MHz) RAM: DDR2 128M Flash: SPI NOR 16M + SPI NAND 128M WiFi: 2.4GHz with 2 antennas(WiFi/Thread) Ethernet: 1xLAN(10/100M) 2xWAN(10/100M) Button: 1x Reset Button Switch: 1x Mode switch LED: 1x Blue LED + 1x White LED + 1x Orange LED IOT: Thread + ZigBee/Zwave By uboot web failsafe: Push the reset button for 5 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Weiping Yang --- diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index aeeb9385d3..2ad79700d7 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -105,7 +105,9 @@ dongwon,dw02-412h-128m|\ glinet,gl-ar300m-lite|\ glinet,gl-ar300m-nand|\ glinet,gl-ar300m-nor|\ -glinet,gl-ar300m16) +glinet,gl-ar300m16|\ +glinet,gl-s200-nor|\ +glinet,gl-s200-nor-nand) idx="$(find_mtd_index u-boot-env)" [ -n "$idx" ] && \ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000" diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor-nand.dts new file mode 100644 index 0000000000..297093c09a --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor-nand.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "qca9531_glinet_gl-s200.dtsi" + +/ { + compatible = "glinet,gl-s200-nor-nand", "qca,qca9531"; + model = "GL.iNet GL-S200 (NOR/NAND)"; +}; + +&nor_partitions { + partition@60000 { + label = "kernel"; + reg = <0x060000 0x400000>; + }; + parition@460000 { + label = "nor_reserved"; + reg = <0x460000 0xb80000>; + }; + parition@fe0000 { + label = "log"; + reg = <0xfe0000 0x020000>; + }; +}; + +&flash_nand { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor.dts b/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor.dts new file mode 100644 index 0000000000..e1ca4eaf73 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-s200-nor.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "qca9531_glinet_gl-s200.dtsi" + +/ { + compatible = "glinet,gl-s200-nor", "qca,qca9531"; + model = "GL.iNet GL-S200 (NOR)"; +}; + +&nor_partitions { + partition@60000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x060000 0xf80000>; + }; + partition@fe0000 { + label = "log"; + reg = <0xfe0000 0x020000>; + }; +}; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi new file mode 100644 index 0000000000..44bb83af64 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-s200.dtsi @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca953x.dtsi" + +/ { + compatible = "glinet,gl-s200", "qca,qca9531"; + model = "GL.iNet GL-S200"; + + aliases { + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "reset"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + switch { + label = "switch"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue_led { + label = "gl-s200:blue"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + white_led { + label = "gl-s200:white"; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + orange_led { + label = "gl-s200:orange"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_zigbee_reset { + gpio-export,name = "gpio1"; + gpio-export,output = <1>; + gpio-export,direction_may_change; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + gpio_zwave_reset { + gpio-export,name = "gpio2"; + gpio-export,output = <1>; + gpio-export,direction_may_change; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + gpio_zigbee_upgrade { + gpio-export,name = "gpio11"; + gpio-export,output = <1>; + gpio-export,direction_may_change; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + gpio_zwave_upgrade { + gpio-export,name = "gpio17"; + gpio-export,output = <1>; + gpio-export,direction_may_change; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + ngpios = <17>; + gpio-line-names = + "","reset-zigbee","reset-zwave","reset", + "LED-orange","","","","","","", + "upgrade-zigbee","LED-white","LED-blue", + "switch","","","upgrade-zwave"; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + nor_partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_wan_lan: macaddr@0 { + compatible = "mac-base"; + reg = <0x0 0x6>; + #nvmem-cell-cells = <1>; + }; + + calibration_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + }; + }; + }; + }; + + flash_nand: flash@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <25000000>; + status = "disabled"; + + nand_partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + nand_ubi: partition@0 { + label = "ubi"; + reg = <0x000000 0x8000000>; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + nvmem-cells = <&macaddr_wan_lan 0>; + nvmem-cell-names = "mac-address"; +}; + +ð1 { + status = "okay"; + + nvmem-cells = <&macaddr_wan_lan 1>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + nvmem-cells = <&calibration_art_1000>; + nvmem-cell-names = "calibration"; +}; diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index fd32450702..5c9e190e19 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -203,6 +203,35 @@ define Device/glinet_gl-e750 endef TARGET_DEVICES += glinet_gl-e750 +define Device/glinet_gl-s200-common + SOC := qca9531 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-S200 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-ch341 + SUPPORTED_DEVICES += gl-s200 glinet,gl-s200 +endef + +define Device/glinet_gl-s200-nor + $(Device/glinet_gl-s200-common) + DEVICE_VARIANT := NOR + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += glinet_gl-s200-nor + +define Device/glinet_gl-s200-nor-nand + $(Device/glinet_gl-s200-common) + DEVICE_VARIANT := NOR/NAND + KERNEL_SIZE := 4096k + BLOCKSIZE := 128k + PAGESIZE := 2048 + VID_HDR_OFFSET := 2048 + IMAGES += factory.img + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi + SUPPORTED_DEVICES += gl-s200 glinet,gl-s200 +endef +TARGET_DEVICES += glinet_gl-s200-nor-nand + define Device/glinet_gl-xe300 SOC := qca9531 DEVICE_VENDOR := GL.iNet diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network index 60f085d378..f5dda414c2 100644 --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network @@ -40,6 +40,8 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; + glinet,gl-s200-nor|\ + glinet,gl-s200-nor-nand|\ netgear,pgzng1) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; diff --git a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh index 5a4f76ba51..117b2f900a 100644 --- a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh @@ -20,6 +20,8 @@ platform_do_upgrade() { ;; glinet,gl-ar750s-nor|\ glinet,gl-ar750s-nor-nand|\ + glinet,gl-s200-nor|\ + glinet,gl-s200-nor-nand|\ glinet,gl-x1200-nor|\ glinet,gl-x1200-nor-nand) nand_nor_do_upgrade "$1"