From: Hauke Mehrtens Date: Mon, 16 Sep 2013 21:09:10 +0000 (+0000) Subject: brcm47xx: Add support for Huawei E970 X-Git-Tag: reboot~9284 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c78e4fb220169b5ee8358f7b2582972c00b88fd7;p=openwrt%2Fstaging%2Fjogo.git brcm47xx: Add support for Huawei E970 This patch adds support for Huawei E970 wireless gateway devices. It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV. E960/B970 should work too, from what I know it's basically the same hardware. The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem. It uses a hardware watchdog which needs GPIO-7 to be toggled at least every 1-2 seconds. This patch uses gpio_wdt module (see my previous patch today) to take care of this. Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset button, image to be used for upgrade from OEM firmware's web interface Link to the wiki page I've created: Issue: * lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog reset during kernel decompress. Signed-off-by: Mathias Adam SVN-Revision: 38011 --- diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10 index 614205fb78..9d4f503d07 100644 --- a/target/linux/brcm47xx/config-3.10 +++ b/target/linux/brcm47xx/config-3.10 @@ -59,6 +59,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_WDT=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y diff --git a/target/linux/brcm47xx/image/Makefile b/target/linux/brcm47xx/image/Makefile index 9a477a6fda..eca09a8c5b 100644 --- a/target/linux/brcm47xx/image/Makefile +++ b/target/linux/brcm47xx/image/Makefile @@ -13,6 +13,7 @@ endef define Image/Prepare cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma + gzip -nc9 $(KDIR)/vmlinux > $(KDIR)/vmlinux.gz ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) cat $(KDIR)/vmlinux-initramfs | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux-initramfs.lzma endif @@ -59,6 +60,12 @@ define Image/Build/Edi $(STAGING_DIR_HOST)/bin/trx2edips $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin endef +define Image/Build/Huawei + dd if=/dev/zero of=$(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin bs=92 count=1 + echo -ne 'HDR0\x08\x00\x00\x00' >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin + cat $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin +endef + define trxalign/jffs2-128k -a 0x20000 -f $(KDIR)/root.$(1) endef @@ -134,9 +141,13 @@ define Image/Build $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \ -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \ $(call trxalign/$(1),$(1)) + $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx \ + -f $(KDIR)/vmlinux.gz \ + $(call trxalign/$(1),$(1)) $(call Image/Build/$(1),$(1)) $(call Image/Build/Motorola,$(1),wr850g,1,$(1)) $(call Image/Build/USR,$(1),usr5461,$(1)) + $(call Image/Build/Huawei,$(1),e970,$(1)) $(call Image/Build/Chk,$(1),wgr614_v8,U12H072T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1))) # $(call Image/Build/Chk,$(1),wgr614_v9,U12H094T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1))) $(call Image/Build/Chk,$(1),wndr3300_v1,U12H093T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1))) diff --git a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch new file mode 100644 index 0000000000..12539fd9be --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch @@ -0,0 +1,108 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -33,11 +33,13 @@ + #include + #include + #include ++#include + #include + #include + #include + #include + #include ++#include + + union bcm47xx_bus bcm47xx_bus; + EXPORT_SYMBOL(bcm47xx_bus); +@@ -254,6 +256,33 @@ void __init plat_mem_setup(void) + pm_power_off = bcm47xx_machine_halt; + } + ++static struct gpio_wdt_platform_data gpio_wdt_data; ++ ++static struct platform_device gpio_wdt_device = { ++ .name = "gpio-wdt", ++ .id = 0, ++ .dev = { ++ .platform_data = &gpio_wdt_data, ++ }, ++}; ++ ++static int __init bcm47xx_register_gpio_watchdog(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ ++ switch (board) { ++ case BCM47XX_BOARD_HUAWEI_E970: ++ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n"); ++ gpio_wdt_data.gpio = 7; ++ gpio_wdt_data.interval = HZ; ++ gpio_wdt_data.first_interval = HZ / 5; ++ return platform_device_register(&gpio_wdt_device); ++ default: ++ /* Nothing to do */ ++ return 0; ++ } ++} ++ + static int __init bcm47xx_register_bus_complete(void) + { + switch (bcm47xx_bus_type) { +@@ -268,6 +297,8 @@ static int __init bcm47xx_register_bus_c + break; + #endif + } ++ bcm47xx_register_gpio_watchdog(); ++ + return 0; + } + device_initcall(bcm47xx_register_bus_complete); +--- a/arch/mips/configs/bcm47xx_defconfig ++++ b/arch/mips/configs/bcm47xx_defconfig +@@ -379,6 +379,7 @@ CONFIG_THERMAL=y + CONFIG_WATCHDOG=y + CONFIG_WATCHDOG_NOWAYOUT=y + CONFIG_BCM47XX_WDT=y ++CONFIG_GPIO_WDT=y + CONFIG_SSB_DRIVER_GIGE=y + CONFIG_DISPLAY_SUPPORT=m + CONFIG_SOUND=m +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu + } + EXPORT_SYMBOL(ssb_watchdog_timer_set); + ++#ifdef CONFIG_BCM47XX ++#include ++ ++static bool ssb_watchdog_supported(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ ++ /* The Huawei E970 has a hardware watchdog using a GPIO */ ++ switch (board) { ++ case BCM47XX_BOARD_HUAWEI_E970: ++ return false; ++ default: ++ return true; ++ } ++} ++#else ++static bool ssb_watchdog_supported(void) ++{ ++ return true; ++} ++#endif ++ + int ssb_watchdog_register(struct ssb_bus *bus) + { + struct bcm47xx_wdt wdt = {}; + struct platform_device *pdev; + ++ if (!ssb_watchdog_supported()) ++ return 0; ++ + if (ssb_chipco_available(&bus->chipco)) { + wdt.driver_data = &bus->chipco; + wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt; diff --git a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch index 455067631a..f30a4fbd75 100644 --- a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch +++ b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -120,6 +120,10 @@ static int bcm47xx_get_invariants(struct +@@ -122,6 +122,10 @@ static int bcm47xx_get_invariants(struct if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);