From: Hauke Mehrtens Date: Fri, 13 Apr 2012 16:53:16 +0000 (+0000) Subject: brcm47xx: remove support for kernel 3.0 X-Git-Tag: reboot~14297 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c75e700d4234d149aeba5781d0a73cc329a6005c;p=openwrt%2Fopenwrt.git brcm47xx: remove support for kernel 3.0 SVN-Revision: 31276 --- diff --git a/target/linux/brcm47xx/config-3.0 b/target/linux/brcm47xx/config-3.0 deleted file mode 100644 index ddf2b2fea8..0000000000 --- a/target/linux/brcm47xx/config-3.0 +++ /dev/null @@ -1,140 +0,0 @@ -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARPD is not set -# CONFIG_ATH79 is not set -CONFIG_B44=y -CONFIG_B44_PCI=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_BCM47XX=y -CONFIG_BCM47XX_BCMA=y -CONFIG_BCM47XX_SSB=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_MIPS=y -CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA_SFLASH=y -# CONFIG_BRCMUTIL is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CFE=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -# CONFIG_LANTIQ is not set -CONFIG_LEDS_GPIO=y -CONFIG_MACH_NO_WESTBRIDGE=y -# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_BCM47XX_PFLASH=y -CONFIG_MTD_BCM47XX_SFLASH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_DEBUG=y -CONFIG_SSB_DRIVER_EXTIF=y -CONFIG_SSB_DRIVER_GIGE=y -CONFIG_SSB_DRIVER_MIPS=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_EMBEDDED=y -CONFIG_SSB_PCICORE_HOSTMODE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SERIAL=y -CONFIG_SSB_SFLASH=y -CONFIG_SSB_SPROM=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_USB_HCD_BCMA is not set -# CONFIG_USB_HCD_SSB is not set -CONFIG_USB_SUPPORT=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_XZ_DEC=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch b/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch deleted file mode 100644 index 5dd648da3c..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch +++ /dev/null @@ -1,443 +0,0 @@ -From 18fe82b600f9563e59e28746211a2ce3176a81de Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 6 Jun 2011 00:07:36 +0200 -Subject: [PATCH 08/26] bcm47xx: prepare to support different buses - -Prepare bcm47xx to support different System buses. Before adding -support for bcma it should be possible to build bcm47xx without the -need of ssb. With this patch bcm47xx does not directly contain a -ssb_bus, but a union contain all the supported system buses. As a SoC -just uses one system bus a union is a good choice. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/gpio.c | 56 ++++++++++++++++---------- - arch/mips/bcm47xx/nvram.c | 15 +++++-- - arch/mips/bcm47xx/serial.c | 13 +++++- - arch/mips/bcm47xx/setup.c | 33 ++++++++++++--- - arch/mips/bcm47xx/time.c | 9 +++- - arch/mips/bcm47xx/wgt634u.c | 14 ++++-- - arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 14 ++++++- - arch/mips/include/asm/mach-bcm47xx/gpio.h | 55 ++++++++++++++++++------- - drivers/watchdog/bcm47xx_wdt.c | 12 +++++- - 9 files changed, 160 insertions(+), 61 deletions(-) - ---- a/arch/mips/bcm47xx/gpio.c -+++ b/arch/mips/bcm47xx/gpio.c -@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47 - - int gpio_request(unsigned gpio, const char *tag) - { -- if (ssb_chipco_available(&ssb_bcm47xx.chipco) && -- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -- return -EINVAL; -- -- if (ssb_extif_available(&ssb_bcm47xx.extif) && -- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) -- return -EINVAL; -- -- if (test_and_set_bit(gpio, gpio_in_use)) -- return -EBUSY; -- -- return 0; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && -+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -+ return -EINVAL; -+ -+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) && -+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) -+ return -EINVAL; -+ -+ if (test_and_set_bit(gpio, gpio_in_use)) -+ return -EBUSY; -+ -+ return 0; -+ } -+ return -EINVAL; - } - EXPORT_SYMBOL(gpio_request); - - void gpio_free(unsigned gpio) - { -- if (ssb_chipco_available(&ssb_bcm47xx.chipco) && -- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -- return; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && -+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -+ return; -+ -+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) && -+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) -+ return; - -- if (ssb_extif_available(&ssb_bcm47xx.extif) && -- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES)) -+ clear_bit(gpio, gpio_in_use); - return; -- -- clear_bit(gpio, gpio_in_use); -+ } - } - EXPORT_SYMBOL(gpio_free); - - int gpio_to_irq(unsigned gpio) - { -- if (ssb_chipco_available(&ssb_bcm47xx.chipco)) -- return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2; -- else if (ssb_extif_available(&ssb_bcm47xx.extif)) -- return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2; -- else -- return -EINVAL; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco)) -+ return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2; -+ else if (ssb_extif_available(&bcm47xx_bus.ssb.extif)) -+ return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2; -+ else -+ return -EINVAL; -+ } -+ return -EINVAL; - } - EXPORT_SYMBOL_GPL(gpio_to_irq); ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE]; - /* Probe for NVRAM header */ - static void early_nvram_init(void) - { -- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; -+ struct ssb_mipscore *mcore_ssb; - struct nvram_header *header; - int i; -- u32 base, lim, off; -+ u32 base = 0; -+ u32 lim = 0; -+ u32 off; - u32 *src, *dst; - -- base = mcore->flash_window; -- lim = mcore->flash_window_size; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ mcore_ssb = &bcm47xx_bus.ssb.mipscore; -+ base = mcore_ssb->flash_window; -+ lim = mcore_ssb->flash_window_size; -+ break; -+ } - - off = FLASH_MIN; - while (off <= lim) { ---- a/arch/mips/bcm47xx/serial.c -+++ b/arch/mips/bcm47xx/serial.c -@@ -23,10 +23,10 @@ static struct platform_device uart8250_d - }, - }; - --static int __init uart8250_init(void) -+static int __init uart8250_init_ssb(void) - { - int i; -- struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore); -+ struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore); - - memset(&uart8250_data, 0, sizeof(uart8250_data)); - -@@ -45,6 +45,15 @@ static int __init uart8250_init(void) - return platform_device_register(&uart8250_device); - } - -+static int __init uart8250_init(void) -+{ -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ return uart8250_init_ssb(); -+ } -+ return -EINVAL; -+} -+ - module_init(uart8250_init); - - MODULE_AUTHOR("Aurelien Jarno "); ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -35,15 +35,22 @@ - #include - #include - --struct ssb_bus ssb_bcm47xx; --EXPORT_SYMBOL(ssb_bcm47xx); -+union bcm47xx_bus bcm47xx_bus; -+EXPORT_SYMBOL(bcm47xx_bus); -+ -+enum bcm47xx_bus_type bcm47xx_bus_type; -+EXPORT_SYMBOL(bcm47xx_bus_type); - - static void bcm47xx_machine_restart(char *command) - { - printk(KERN_ALERT "Please stand by while rebooting the system...\n"); - local_irq_disable(); - /* Set the watchdog timer to reset immediately */ -- ssb_watchdog_timer_set(&ssb_bcm47xx, 1); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); -+ break; -+ } - while (1) - cpu_relax(); - } -@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void) - { - /* Disable interrupts and watchdog and spin forever */ - local_irq_disable(); -- ssb_watchdog_timer_set(&ssb_bcm47xx, 0); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); -+ break; -+ } - while (1) - cpu_relax(); - } -@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct - return 0; - } - --void __init plat_mem_setup(void) -+static void __init bcm47xx_register_ssb(void) - { - int err; - char buf[100]; -@@ -258,12 +269,12 @@ void __init plat_mem_setup(void) - printk(KERN_WARNING "bcm47xx: someone else already registered" - " a ssb SPROM callback handler (err %d)\n", err); - -- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, -+ err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE, - bcm47xx_get_invariants); - if (err) - panic("Failed to initialize SSB bus (err %d)\n", err); - -- mcore = &ssb_bcm47xx.mipscore; -+ mcore = &bcm47xx_bus.ssb.mipscore; - if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { - if (strstr(buf, "console=ttyS1")) { - struct ssb_serial_port port; -@@ -276,6 +287,14 @@ void __init plat_mem_setup(void) - memcpy(&mcore->serial_ports[1], &port, sizeof(port)); - } - } -+} -+ -+void __init plat_mem_setup(void) -+{ -+ struct cpuinfo_mips *c = ¤t_cpu_data; -+ -+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; -+ bcm47xx_register_ssb(); - - _machine_restart = bcm47xx_machine_restart; - _machine_halt = bcm47xx_machine_halt; ---- a/arch/mips/bcm47xx/time.c -+++ b/arch/mips/bcm47xx/time.c -@@ -30,7 +30,7 @@ - - void __init plat_time_init(void) - { -- unsigned long hz; -+ unsigned long hz = 0; - - /* - * Use deterministic values for initial counter interrupt -@@ -39,7 +39,12 @@ void __init plat_time_init(void) - write_c0_count(0); - write_c0_compare(0xffff); - -- hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; -+ break; -+ } -+ - if (!hz) - hz = 100000000; - ---- a/arch/mips/bcm47xx/wgt634u.c -+++ b/arch/mips/bcm47xx/wgt634u.c -@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int ir - - /* Interrupts are shared, check if the current one is - a GPIO interrupt. */ -- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco, -+ if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco, - SSB_CHIPCO_IRQ_GPIO)) - return IRQ_NONE; - -@@ -132,22 +132,26 @@ static int __init wgt634u_init(void) - * machine. Use the MAC address as an heuristic. Netgear Inc. has - * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. - */ -+ u8 *et0mac; - -- u8 *et0mac = ssb_bcm47xx.sprom.et0mac; -+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) -+ return -ENODEV; -+ -+ et0mac = bcm47xx_bus.ssb.sprom.et0mac; - - if (et0mac[0] == 0x00 && - ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) || - (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) { -- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; -+ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; - - printk(KERN_INFO "WGT634U machine detected.\n"); - - if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), - gpio_interrupt, IRQF_SHARED, -- "WGT634U GPIO", &ssb_bcm47xx.chipco)) { -+ "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) { - gpio_direction_input(WGT634U_GPIO_RESET); - gpio_intmask(WGT634U_GPIO_RESET, 1); -- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco, -+ ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco, - SSB_CHIPCO_IRQ_GPIO, - SSB_CHIPCO_IRQ_GPIO); - } ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -@@ -19,7 +19,17 @@ - #ifndef __ASM_BCM47XX_H - #define __ASM_BCM47XX_H - --/* SSB bus */ --extern struct ssb_bus ssb_bcm47xx; -+#include -+ -+enum bcm47xx_bus_type { -+ BCM47XX_BUS_TYPE_SSB, -+}; -+ -+union bcm47xx_bus { -+ struct ssb_bus ssb; -+}; -+ -+extern union bcm47xx_bus bcm47xx_bus; -+extern enum bcm47xx_bus_type bcm47xx_bus_type; - - #endif /* __ASM_BCM47XX_H */ ---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h -+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h -@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio); - - static inline int gpio_get_value(unsigned gpio) - { -- return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio); -+ } -+ return -EINVAL; - } - - static inline void gpio_set_value(unsigned gpio, int value) - { -- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, -+ value ? 1 << gpio : 0); -+ } - } - - static inline int gpio_direction_input(unsigned gpio) - { -- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0); -- return 0; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0); -+ return 0; -+ } -+ return -EINVAL; - } - - static inline int gpio_direction_output(unsigned gpio, int value) - { -- /* first set the gpio out value */ -- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0); -- /* then set the gpio mode */ -- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio); -- return 0; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ /* first set the gpio out value */ -+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, -+ value ? 1 << gpio : 0); -+ /* then set the gpio mode */ -+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio); -+ return 0; -+ } -+ return -EINVAL; - } - - static inline int gpio_intmask(unsigned gpio, int value) - { -- ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio, -- value ? 1 << gpio : 0); -- return 0; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio, -+ value ? 1 << gpio : 0); -+ return 0; -+ } -+ return -EINVAL; - } - - static inline int gpio_polarity(unsigned gpio, int value) - { -- ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio, -- value ? 1 << gpio : 0); -- return 0; -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio, -+ value ? 1 << gpio : 0); -+ return 0; -+ } -+ return -EINVAL; - } - - ---- a/drivers/watchdog/bcm47xx_wdt.c -+++ b/drivers/watchdog/bcm47xx_wdt.c -@@ -54,12 +54,20 @@ static atomic_t ticks; - static inline void bcm47xx_wdt_hw_start(void) - { - /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */ -- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff); -+ break; -+ } - } - - static inline int bcm47xx_wdt_hw_stop(void) - { -- return ssb_watchdog_timer_set(&ssb_bcm47xx, 0); -+ switch (bcm47xx_bus_type) { -+ case BCM47XX_BUS_TYPE_SSB: -+ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); -+ } -+ return -EINVAL; - } - - static void bcm47xx_timer_tick(unsigned long unused) diff --git a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch b/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch deleted file mode 100644 index 5b5771a85b..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch +++ /dev/null @@ -1,395 +0,0 @@ -From 1ba12ca9e05153fbc611918ec0ea4cd9ec97f2c8 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Wed, 22 Jun 2011 22:16:35 +0200 -Subject: [PATCH 09/26] bcm47xx: make it possible to build bcm47xx without ssb. - - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/Kconfig | 8 +------- - arch/mips/bcm47xx/Kconfig | 18 ++++++++++++++++++ - arch/mips/bcm47xx/Makefile | 3 ++- - arch/mips/bcm47xx/gpio.c | 6 ++++++ - arch/mips/bcm47xx/nvram.c | 4 ++++ - arch/mips/bcm47xx/serial.c | 4 ++++ - arch/mips/bcm47xx/setup.c | 8 ++++++++ - arch/mips/bcm47xx/time.c | 2 ++ - arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++++ - arch/mips/include/asm/mach-bcm47xx/gpio.h | 12 ++++++++++++ - arch/mips/pci/pci-bcm47xx.c | 6 ++++++ - drivers/watchdog/bcm47xx_wdt.c | 4 ++++ - 12 files changed, 71 insertions(+), 8 deletions(-) - create mode 100644 arch/mips/bcm47xx/Kconfig - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -91,15 +91,8 @@ config BCM47XX - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU -- select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN -- select SSB -- select SSB_DRIVER_MIPS -- select SSB_DRIVER_EXTIF -- select SSB_EMBEDDED -- select SSB_B43_PCI_BRIDGE if PCI -- select SSB_PCICORE_HOSTMODE if PCI - select GENERIC_GPIO - select SYS_HAS_EARLY_PRINTK - select CFE -@@ -785,6 +778,7 @@ endchoice - - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath79/Kconfig" -+source "arch/mips/bcm47xx/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/jz4740/Kconfig" ---- /dev/null -+++ b/arch/mips/bcm47xx/Kconfig -@@ -0,0 +1,18 @@ -+if BCM47XX -+ -+config BCM47XX_SSB -+ bool "SSB Support for Broadcom BCM47XX" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SSB -+ select SSB_DRIVER_MIPS -+ select SSB_DRIVER_EXTIF -+ select SSB_EMBEDDED -+ select SSB_B43_PCI_BRIDGE if PCI -+ select SSB_PCICORE_HOSTMODE if PCI -+ default y -+ help -+ Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. -+ -+ This will generate an image with support for SSB and MIPS32 R1 instruction set. -+ -+endif ---- a/arch/mips/bcm47xx/Makefile -+++ b/arch/mips/bcm47xx/Makefile -@@ -3,4 +3,5 @@ - # under Linux. - # - --obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o -+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o -+obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o ---- a/arch/mips/bcm47xx/gpio.c -+++ b/arch/mips/bcm47xx/gpio.c -@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47 - int gpio_request(unsigned gpio, const char *tag) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && - ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const ch - return -EBUSY; - - return 0; -+#endif - } - return -EINVAL; - } -@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request); - void gpio_free(unsigned gpio) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) && - ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES)) -@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio) - - clear_bit(gpio, gpio_in_use); - return; -+#endif - } - } - EXPORT_SYMBOL(gpio_free); -@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free); - int gpio_to_irq(unsigned gpio) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco)) - return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2; -@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio) - return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2; - else - return -EINVAL; -+#endif - } - return -EINVAL; - } ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE]; - /* Probe for NVRAM header */ - static void early_nvram_init(void) - { -+#ifdef CONFIG_BCM47XX_SSB - struct ssb_mipscore *mcore_ssb; -+#endif - struct nvram_header *header; - int i; - u32 base = 0; -@@ -35,11 +37,13 @@ static void early_nvram_init(void) - u32 *src, *dst; - - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - mcore_ssb = &bcm47xx_bus.ssb.mipscore; - base = mcore_ssb->flash_window; - lim = mcore_ssb->flash_window_size; - break; -+#endif - } - - off = FLASH_MIN; ---- a/arch/mips/bcm47xx/serial.c -+++ b/arch/mips/bcm47xx/serial.c -@@ -23,6 +23,7 @@ static struct platform_device uart8250_d - }, - }; - -+#ifdef CONFIG_BCM47XX_SSB - static int __init uart8250_init_ssb(void) - { - int i; -@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void - } - return platform_device_register(&uart8250_device); - } -+#endif - - static int __init uart8250_init(void) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - return uart8250_init_ssb(); -+#endif - } - return -EINVAL; - } ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char - local_irq_disable(); - /* Set the watchdog timer to reset immediately */ - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); - break; -+#endif - } - while (1) - cpu_relax(); -@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void) - /* Disable interrupts and watchdog and spin forever */ - local_irq_disable(); - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); - break; -+#endif - } - while (1) - cpu_relax(); - } - -+#ifdef CONFIG_BCM47XX_SSB - #define READ_FROM_NVRAM(_outvar, name, buf) \ - if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\ - sprom->_outvar = simple_strtoul(buf, NULL, 0); -@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb( - } - } - } -+#endif - - void __init plat_mem_setup(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; - -+#ifdef CONFIG_BCM47XX_SSB - bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; - bcm47xx_register_ssb(); -+#endif - - _machine_restart = bcm47xx_machine_restart; - _machine_halt = bcm47xx_machine_halt; ---- a/arch/mips/bcm47xx/time.c -+++ b/arch/mips/bcm47xx/time.c -@@ -40,9 +40,11 @@ void __init plat_time_init(void) - write_c0_compare(0xffff); - - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; - break; -+#endif - } - - if (!hz) ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -@@ -22,11 +22,15 @@ - #include - - enum bcm47xx_bus_type { -+#ifdef CONFIG_BCM47XX_SSB - BCM47XX_BUS_TYPE_SSB, -+#endif - }; - - union bcm47xx_bus { -+#ifdef CONFIG_BCM47XX_SSB - struct ssb_bus ssb; -+#endif - }; - - extern union bcm47xx_bus bcm47xx_bus; ---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h -+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h -@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio); - static inline int gpio_get_value(unsigned gpio) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio); -+#endif - } - return -EINVAL; - } -@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigne - static inline void gpio_set_value(unsigned gpio, int value) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, - value ? 1 << gpio : 0); -+#endif - } - } - - static inline int gpio_direction_input(unsigned gpio) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0); - return 0; -+#endif - } - return -EINVAL; - } -@@ -50,6 +56,7 @@ static inline int gpio_direction_input(u - static inline int gpio_direction_output(unsigned gpio, int value) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - /* first set the gpio out value */ - ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, -@@ -57,6 +64,7 @@ static inline int gpio_direction_output( - /* then set the gpio mode */ - ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio); - return 0; -+#endif - } - return -EINVAL; - } -@@ -64,10 +72,12 @@ static inline int gpio_direction_output( - static inline int gpio_intmask(unsigned gpio, int value) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio, - value ? 1 << gpio : 0); - return 0; -+#endif - } - return -EINVAL; - } -@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned - static inline int gpio_polarity(unsigned gpio, int value) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio, - value ? 1 << gpio : 0); - return 0; -+#endif - } - return -EINVAL; - } ---- a/arch/mips/pci/pci-bcm47xx.c -+++ b/arch/mips/pci/pci-bcm47xx.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { -@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct - - int pcibios_plat_dev_init(struct pci_dev *dev) - { -+#ifdef CONFIG_BCM47XX_SSB - int res; - u8 slot, pin; - -+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) -+ return 0; -+ - res = ssb_pcibios_plat_dev_init(dev); - if (res < 0) { - printk(KERN_ALERT "PCI: Failed to init device %s\n", -@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev - } - - dev->irq = res; -+#endif - return 0; - } ---- a/drivers/watchdog/bcm47xx_wdt.c -+++ b/drivers/watchdog/bcm47xx_wdt.c -@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start( - { - /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */ - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff); - break; -+#endif - } - } - - static inline int bcm47xx_wdt_hw_stop(void) - { - switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); -+#endif - } - return -EINVAL; - } diff --git a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch deleted file mode 100644 index fc8b09d91b..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch +++ /dev/null @@ -1,410 +0,0 @@ -From d3fb63a710e1f04fed2c2703c6dce3531490c451 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 6 Jun 2011 00:07:37 +0200 -Subject: [PATCH 10/26] bcm47xx: add support for bcma bus - -This patch add support for the bcma bus. Broadcom uses only Mips 74K -CPUs on the new SoC and on the old ons using ssb bus there are no Mips -74K CPUs. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/Kconfig | 13 ++++++ - arch/mips/bcm47xx/gpio.c | 22 +++++++++++ - arch/mips/bcm47xx/nvram.c | 10 +++++ - arch/mips/bcm47xx/serial.c | 29 ++++++++++++++ - arch/mips/bcm47xx/setup.c | 53 +++++++++++++++++++++++++- - arch/mips/bcm47xx/time.c | 5 ++ - arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 8 ++++ - arch/mips/include/asm/mach-bcm47xx/gpio.h | 41 ++++++++++++++++++++ - drivers/watchdog/bcm47xx_wdt.c | 11 +++++ - 9 files changed, 190 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm47xx/Kconfig -+++ b/arch/mips/bcm47xx/Kconfig -@@ -15,4 +15,17 @@ config BCM47XX_SSB - - This will generate an image with support for SSB and MIPS32 R1 instruction set. - -+config BCM47XX_BCMA -+ bool "BCMA Support for Broadcom BCM47XX" -+ select SYS_HAS_CPU_MIPS32_R2 -+ select BCMA -+ select BCMA_HOST_SOC -+ select BCMA_DRIVER_MIPS -+ select BCMA_DRIVER_PCI_HOSTMODE if PCI -+ default y -+ help -+ Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. -+ -+ This will generate an image with support for BCMA and MIPS32 R2 instruction set. -+ - endif ---- a/arch/mips/bcm47xx/gpio.c -+++ b/arch/mips/bcm47xx/gpio.c -@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const ch - - return 0; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES) -+ return -EINVAL; -+ -+ if (test_and_set_bit(gpio, gpio_in_use)) -+ return -EBUSY; -+ -+ return 0; -+#endif - } - return -EINVAL; - } -@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio) - clear_bit(gpio, gpio_in_use); - return; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES) -+ return; -+ -+ clear_bit(gpio, gpio_in_use); -+ return; -+#endif - } - } - EXPORT_SYMBOL(gpio_free); -@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio) - else - return -EINVAL; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2; -+#endif - } - return -EINVAL; - } ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -29,6 +29,9 @@ static void early_nvram_init(void) - #ifdef CONFIG_BCM47XX_SSB - struct ssb_mipscore *mcore_ssb; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ struct bcma_drv_cc *bcma_cc; -+#endif - struct nvram_header *header; - int i; - u32 base = 0; -@@ -44,6 +47,13 @@ static void early_nvram_init(void) - lim = mcore_ssb->flash_window_size; - break; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; -+ base = bcma_cc->pflash.window; -+ lim = bcma_cc->pflash.window_size; -+ break; -+#endif - } - - off = FLASH_MIN; ---- a/arch/mips/bcm47xx/serial.c -+++ b/arch/mips/bcm47xx/serial.c -@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void - } - #endif - -+#ifdef CONFIG_BCM47XX_BCMA -+static int __init uart8250_init_bcma(void) -+{ -+ int i; -+ struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc); -+ -+ memset(&uart8250_data, 0, sizeof(uart8250_data)); -+ -+ for (i = 0; i < cc->nr_serial_ports; i++) { -+ struct plat_serial8250_port *p = &(uart8250_data[i]); -+ struct bcma_serial_port *bcma_port; -+ bcma_port = &(cc->serial_ports[i]); -+ -+ p->mapbase = (unsigned int) bcma_port->regs; -+ p->membase = (void *) bcma_port->regs; -+ p->irq = bcma_port->irq + 2; -+ p->uartclk = bcma_port->baud_base; -+ p->regshift = bcma_port->reg_shift; -+ p->iotype = UPIO_MEM; -+ p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; -+ } -+ return platform_device_register(&uart8250_device); -+} -+#endif -+ - static int __init uart8250_init(void) - { - switch (bcm47xx_bus_type) { -@@ -54,6 +79,10 @@ static int __init uart8250_init(void) - case BCM47XX_BUS_TYPE_SSB: - return uart8250_init_ssb(); - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ return uart8250_init_bcma(); -+#endif - } - return -EINVAL; - } ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -29,6 +29,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); - break; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); -+ break; -+#endif - } - while (1) - cpu_relax(); -@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void) - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); - break; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); -+ break; -+#endif - } - while (1) - cpu_relax(); -@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb( - } - #endif - -+#ifdef CONFIG_BCM47XX_BCMA -+static void __init bcm47xx_register_bcma(void) -+{ -+ int err; -+ -+ err = bcma_host_soc_register(&bcm47xx_bus.bcma); -+ if (err) -+ panic("Failed to initialize BCMA bus (err %d)\n", err); -+} -+#endif -+ - void __init plat_mem_setup(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; - -+ if (c->cputype == CPU_74K) { -+ printk(KERN_INFO "bcm47xx: using bcma bus\n"); -+#ifdef CONFIG_BCM47XX_BCMA -+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; -+ bcm47xx_register_bcma(); -+#endif -+ } else { -+ printk(KERN_INFO "bcm47xx: using ssb bus\n"); - #ifdef CONFIG_BCM47XX_SSB -- bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; -- bcm47xx_register_ssb(); -+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; -+ bcm47xx_register_ssb(); - #endif -+ } - - _machine_restart = bcm47xx_machine_restart; - _machine_halt = bcm47xx_machine_halt; - pm_power_off = bcm47xx_machine_halt; - } -+ -+static int __init bcm47xx_register_bus_complete(void) -+{ -+ switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB -+ case BCM47XX_BUS_TYPE_SSB: -+ /* Nothing to do */ -+ break; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_bus_register(&bcm47xx_bus.bcma.bus); -+ break; -+#endif -+ } -+ return 0; -+} -+device_initcall(bcm47xx_register_bus_complete); ---- a/arch/mips/bcm47xx/time.c -+++ b/arch/mips/bcm47xx/time.c -@@ -45,6 +45,11 @@ void __init plat_time_init(void) - hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; - break; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2; -+ break; -+#endif - } - - if (!hz) ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h -@@ -20,17 +20,25 @@ - #define __ASM_BCM47XX_H - - #include -+#include -+#include - - enum bcm47xx_bus_type { - #ifdef CONFIG_BCM47XX_SSB - BCM47XX_BUS_TYPE_SSB, - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ BCM47XX_BUS_TYPE_BCMA, -+#endif - }; - - union bcm47xx_bus { - #ifdef CONFIG_BCM47XX_SSB - struct ssb_bus ssb; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ struct bcma_soc bcma; -+#endif - }; - - extern union bcm47xx_bus bcm47xx_bus; ---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h -+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h -@@ -10,6 +10,7 @@ - #define __BCM47XX_GPIO_H - - #include -+#include - #include - - #define BCM47XX_EXTIF_GPIO_LINES 5 -@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigne - case BCM47XX_BUS_TYPE_SSB: - return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio); - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, -+ 1 << gpio); -+#endif - } - return -EINVAL; - } -@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsign - case BCM47XX_BUS_TYPE_SSB: - ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio, - value ? 1 << gpio : 0); -+ return; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, -+ value ? 1 << gpio : 0); -+ return; - #endif - } - } -@@ -49,6 +62,12 @@ static inline int gpio_direction_input(u - ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0); - return 0; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, -+ 0); -+ return 0; -+#endif - } - return -EINVAL; - } -@@ -65,6 +84,16 @@ static inline int gpio_direction_output( - ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio); - return 0; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ /* first set the gpio out value */ -+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, -+ value ? 1 << gpio : 0); -+ /* then set the gpio mode */ -+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio, -+ 1 << gpio); -+ return 0; -+#endif - } - return -EINVAL; - } -@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned - value ? 1 << gpio : 0); - return 0; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc, -+ 1 << gpio, value ? 1 << gpio : 0); -+ return 0; -+#endif - } - return -EINVAL; - } -@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned - value ? 1 << gpio : 0); - return 0; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc, -+ 1 << gpio, value ? 1 << gpio : 0); -+ return 0; -+#endif - } - return -EINVAL; - } ---- a/drivers/watchdog/bcm47xx_wdt.c -+++ b/drivers/watchdog/bcm47xx_wdt.c -@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start( - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff); - break; - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, -+ 0xfffffff); -+ break; -+#endif - } - } - -@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(vo - case BCM47XX_BUS_TYPE_SSB: - return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); - #endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); -+ return 0; -+#endif - } - return -EINVAL; - } diff --git a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch deleted file mode 100644 index 216c56d9e6..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 1c44f60e3fd9336d19f56a67c1efc1129fd728a6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 6 Jun 2011 00:07:38 +0200 -Subject: [PATCH 11/26] bcm47xx: fix irq assignment for new SoCs. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/irq.c | 12 ++++++++++++ - 1 files changed, 12 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm47xx/irq.c -+++ b/arch/mips/bcm47xx/irq.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - void plat_irq_dispatch(void) - { -@@ -51,5 +52,16 @@ void plat_irq_dispatch(void) - - void __init arch_init_irq(void) - { -+#ifdef CONFIG_BCM47XX_BCMA -+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) { -+ bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core, -+ BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31); -+ /* -+ * the kernel reads the timer irq from some register and thinks -+ * it's #5, but we offset it by 2 and route to #7 -+ */ -+ cp0_compare_irq = 7; -+ } -+#endif - mips_cpu_irq_init(); - } diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch deleted file mode 100644 index 11855b4496..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch +++ /dev/null @@ -1,142 +0,0 @@ -From b7d9f9cd6a8e463c1061ea29ed3e614403625024 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 14:51:47 +0200 -Subject: [PATCH 12/26] bcma: move parallel flash into a union - - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/nvram.c | 3 + - drivers/bcma/driver_mips.c | 1 + - include/linux/bcma/bcma_driver_chipcommon.h | 73 ++++++++++++++++++++++++++- - 3 files changed, 76 insertions(+), 1 deletions(-) - ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -50,6 +50,9 @@ static void early_nvram_init(void) - #ifdef CONFIG_BCM47XX_BCMA - case BCM47XX_BUS_TYPE_BCMA: - bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; -+ if (bcma_cc->flash_type != BCMA_PFLASH) -+ return; -+ - base = bcma_cc->pflash.window; - lim = bcma_cc->pflash.window_size; - break; ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect( - break; - case BCMA_CC_FLASHT_PARA: - pr_info("found parallel flash.\n"); -+ bus->drv_cc.flash_type = BCMA_PFLASH; - bus->drv_cc.pflash.window = 0x1c000000; - bus->drv_cc.pflash.window_size = 0x02000000; - ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -108,10 +108,68 @@ - #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ - #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ - #define BCMA_CC_FLASHCTL 0x0040 -+ -+/* Start/busy bit in flashcontrol */ -+#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff -+#define BCMA_CC_FLASHCTL_ACTION 0x00000700 -+#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ - #define BCMA_CC_FLASHCTL_START 0x80000000 - #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START -+ -+/* flashcontrol action+opcodes for ST flashes */ -+#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ -+#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ -+#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ -+#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ -+#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ -+#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ -+#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ -+#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ -+#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ -+#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ -+#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ -+#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ -+ -+ -+/* flashcontrol action+opcodes for Atmel flashes */ -+#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 -+#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 -+#define BCMA_CC_FLASHCTL_AT_BUF1_READ -+#define BCMA_CC_FLASHCTL_AT_BUF2_READ -+#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 -+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 -+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 -+#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 -+#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 -+#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 -+#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 -+#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 -+#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 -+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -+#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 -+#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 -+#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 -+#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 -+#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 -+#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 -+ - #define BCMA_CC_FLASHADDR 0x0044 - #define BCMA_CC_FLASHDATA 0x0048 -+ -+/* Status register bits for ST flashes */ -+#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ -+#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ -+#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ -+#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 -+#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ -+ -+/* Status register bits for Atmel flashes */ -+#define BCMA_CC_FLASHDATA_AT_READY 0x80 -+#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 -+#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 -+#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 -+ - #define BCMA_CC_BCAST_ADDR 0x0050 - #define BCMA_CC_BCAST_DATA 0x0054 - #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -300,6 +358,12 @@ - #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ - #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ - -+#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -+#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ -+#define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ -+#define BCMA_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ -+ -+ - /* Data for the PMU, if available. - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ -@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu { - }; - - #ifdef CONFIG_BCMA_DRIVER_MIPS -+enum bcma_flash_type { -+ BCMA_PFLASH, -+}; -+ - struct bcma_pflash { - u8 buswidth; - u32 window; -@@ -334,7 +402,10 @@ struct bcma_drv_cc { - u16 fast_pwrup_delay; - struct bcma_chipcommon_pmu pmu; - #ifdef CONFIG_BCMA_DRIVER_MIPS -- struct bcma_pflash pflash; -+ enum bcma_flash_type flash_type; -+ union { -+ struct bcma_pflash pflash; -+ }; - - int nr_serial_ports; - struct bcma_serial_port serial_ports[4]; diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch deleted file mode 100644 index e78f3c4576..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch +++ /dev/null @@ -1,681 +0,0 @@ -From a62940e988526c881966a8c72cc28c95fca89f3c Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 14:53:07 +0200 -Subject: [PATCH 13/26] bcma: add serial flash support to bcma - - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/Kconfig | 5 + - drivers/bcma/Makefile | 1 + - drivers/bcma/bcma_private.h | 5 + - drivers/bcma/driver_chipcommon_sflash.c | 555 +++++++++++++++++++++++++++ - drivers/bcma/driver_mips.c | 8 +- - include/linux/bcma/bcma_driver_chipcommon.h | 24 ++ - 6 files changed, 597 insertions(+), 1 deletions(-) - create mode 100644 drivers/bcma/driver_chipcommon_sflash.c - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -38,6 +38,11 @@ config BCMA_HOST_SOC - bool - depends on BCMA_DRIVER_MIPS - -+config BCMA_SFLASH -+ bool -+ depends on BCMA_DRIVER_MIPS -+ default y -+ - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" - depends on BCMA && MIPS ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -1,5 +1,6 @@ - bcma-y += main.o scan.o core.o sprom.o - bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o -+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o - bcma-y += driver_pci.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o - bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma - u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); - u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); - -+#ifdef CONFIG_BCMA_SFLASH -+/* driver_chipcommon_sflash.c */ -+int bcma_sflash_init(struct bcma_drv_cc *cc); -+#endif /* CONFIG_BCMA_SFLASH */ -+ - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ - extern int __init bcma_host_pci_init(void); ---- /dev/null -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -0,0 +1,555 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2011, Jonas Gorski -+ * Copyright 2010, Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+ -+#include "bcma_private.h" -+ -+#define NUM_RETRIES 3 -+ -+ -+/* Issue a serial flash command */ -+static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) -+{ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, -+ BCMA_CC_FLASHCTL_START | opcode); -+ while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY) -+ ; -+} -+ -+ -+static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc, -+ u32 offset, u8 byte) -+{ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); -+ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte); -+} -+ -+/* Initialize serial flash access */ -+int bcma_sflash_init(struct bcma_drv_cc *cc) -+{ -+ u32 id, id2; -+ -+ memset(&cc->sflash, 0, sizeof(struct bcma_sflash)); -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ /* Probe for ST chips */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ cc->sflash.blocksize = 64 * 1024; -+ switch (id) { -+ case 0x11: -+ /* ST M25P20 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 4; -+ break; -+ case 0x12: -+ /* ST M25P40 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 8; -+ break; -+ case 0x13: -+ /* ST M25P80 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 0x14: -+ /* ST M25P16 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 0x15: -+ /* ST M25P32 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 0x16: -+ /* ST M25P64 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 0x17: -+ /* ST M25FL128 128 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0xbf: -+ /* All of the following flashes are SST with -+ * 4KB subsectors. Others should be added but -+ * We'll have to revamp the way we identify them -+ * since RES is not eough to disambiguate them. -+ */ -+ cc->sflash.blocksize = 4 * 1024; -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); -+ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); -+ switch (id2) { -+ case 1: -+ /* SST25WF512 512 Kbit Serial Flash */ -+ case 0x48: -+ /* SST25VF512 512 Kbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 2: -+ /* SST25WF010 1 Mbit Serial Flash */ -+ case 0x49: -+ /* SST25VF010 1 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 3: -+ /* SST25WF020 2 Mbit Serial Flash */ -+ case 0x43: -+ /* SST25VF020 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 4: -+ /* SST25WF040 4 Mbit Serial Flash */ -+ case 0x44: -+ /* SST25VF040 4 Mbit Serial Flash */ -+ case 0x8d: -+ /* SST25VF040B 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 5: -+ /* SST25WF080 8 Mbit Serial Flash */ -+ case 0x8e: -+ /* SST25VF080B 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0x41: -+ /* SST25VF016 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x4a: -+ /* SST25VF032 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x4b: -+ /* SST25VF064 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 2048; -+ break; -+ } -+ break; -+ } -+ break; -+ -+ case BCMA_CC_FLASHT_ATSER: -+ /* Probe for Atmel chips */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); -+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; -+ switch (id) { -+ case 0xc: -+ /* Atmel AT45DB011 1Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x14: -+ /* Atmel AT45DB021 2Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x1c: -+ /* Atmel AT45DB041 4Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 2048; -+ break; -+ case 0x24: -+ /* Atmel AT45DB081 8Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x2c: -+ /* Atmel AT45DB161 16Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x34: -+ /* Atmel AT45DB321 32Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 8192; -+ break; -+ case 0x3c: -+ /* Atmel AT45DB642 64Mbit Serial Flash */ -+ cc->sflash.blocksize = 1024; -+ cc->sflash.numblocks = 8192; -+ break; -+ } -+ break; -+ } -+ -+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks; -+ -+ return cc->sflash.size ? 0 : -ENODEV; -+} -+ -+/* Read len bytes starting at offset into buf. Returns number of bytes read. */ -+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ u8 *buf) -+{ -+ u8 *from, *to; -+ u32 cnt, i; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ if ((len >= 4) && (offset & 3)) -+ cnt = 4 - (offset & 3); -+ else if ((len >= 4) && ((u32)buf & 3)) -+ cnt = 4 - ((u32)buf & 3); -+ else -+ cnt = len; -+ -+ -+ if (cc->core->id.rev == 12) -+ from = (u8 *)KSEG1ADDR(BCMA_FLASH2 + offset); -+ else -+ from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset); -+ -+ to = (u8 *)buf; -+ -+ if (cnt < 4) { -+ for (i = 0; i < cnt; i++) { -+ *to = readb(from); -+ from++; -+ to++; -+ } -+ return cnt; -+ } -+ -+ while (cnt >= 4) { -+ *(u32 *)to = readl(from); -+ from += 4; -+ to += 4; -+ cnt -= 4; -+ } -+ -+ return len - cnt; -+} -+ -+/* Poll for command completion. Returns zero when complete. */ -+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset) -+{ -+ if (offset >= cc->sflash.size) -+ return -22; -+ -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ /* Check for ST Write In Progress bit */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR); -+ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA) -+ & BCMA_CC_FLASHDATA_ST_WIP; -+ case BCMA_CC_FLASHT_ATSER: -+ /* Check for Atmel Ready bit */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); -+ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA) -+ & BCMA_CC_FLASHDATA_AT_READY); -+ } -+ -+ return 0; -+} -+ -+ -+static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ int ret = 0; -+ bool is4712b0 = (bus->chipinfo.id == 0x4712) && (bus->chipinfo.rev == 3); -+ u32 mask; -+ -+ -+ /* Enable writes */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); -+ if (is4712b0) { -+ mask = 1 << 14; -+ bcma_sflash_write_u8(cc, offset, *buf++); -+ /* Set chip select */ -+ bcma_cc_set32(cc, BCMA_CC_GPIOOUT, mask); -+ /* Issue a page program with the first byte */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, drop cs and return */ -+ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ bcma_sflash_cmd(cc, *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs */ -+ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ } else if (cc->core->id.rev >= 20) { -+ bcma_sflash_write_u8(cc, offset, *buf++); -+ /* Issue a page program with CSA bit set */ -+ bcma_sflash_cmd(cc, -+ BCMA_CC_FLASHCTL_ST_CSA | -+ BCMA_CC_FLASHCTL_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, poll droping cs and return */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ bcma_sflash_cmd(cc, -+ BCMA_CC_FLASHCTL_ST_CSA | -+ *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs & poll */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); -+ udelay(1); -+ if (!bcma_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ } else { -+ ret = 1; -+ bcma_sflash_write_u8(cc, offset, *buf); -+ /* Page program */ -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP); -+ } -+ return ret; -+} -+ -+static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_sflash *sfl = &cc->sflash; -+ u32 page, byte, mask; -+ int ret = 0; -+ mask = sfl->blocksize - 1; -+ page = (offset & ~mask) << 1; -+ byte = offset & mask; -+ /* Read main memory page into buffer 1 */ -+ if (byte || (len < sfl->blocksize)) { -+ int i = 100; -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD); -+ /* 250 us for AT45DB321B */ -+ while (i > 0 && bcma_sflash_poll(cc, offset)) { -+ udelay(10); -+ i--; -+ } -+ BUG_ON(!bcma_sflash_poll(cc, offset)); -+ } -+ /* Write into buffer 1 */ -+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) { -+ bcma_sflash_write_u8(cc, byte++, *buf++); -+ bcma_sflash_cmd(cc, -+ BCMA_CC_FLASHCTL_AT_BUF1_WRITE); -+ } -+ /* Write buffer 1 into main memory page */ -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM); -+ -+ return ret; -+} -+ -+/* Write len bytes starting at offset into buf. Returns number of bytes -+ * written. Caller should poll for completion. -+ */ -+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_sflash *sfl; -+ int ret = 0, tries = NUM_RETRIES; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ do { -+ ret = sflash_st_write(cc, offset, len, buf); -+ tries--; -+ } while (ret == -EAGAIN && tries > 0); -+ -+ if (ret == -EAGAIN && tries == 0) { -+ pr_info("ST Flash rejected write\n"); -+ ret = -EIO; -+ } -+ break; -+ case BCMA_CC_FLASHT_ATSER: -+ ret = sflash_at_write(cc, offset, len, buf); -+ break; -+ } -+ -+ return ret; -+} -+ -+/* Erase a region. Returns number of bytes scheduled for erasure. -+ * Caller should poll for completion. -+ */ -+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset) -+{ -+ struct bcma_sflash *sfl; -+ -+ if (offset >= cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); -+ /* Newer flashes have "sub-sectors" which can be erased independently -+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as -+ * before. -+ */ -+ bcma_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? BCMA_CC_FLASHCTL_ST_SSE : BCMA_CC_FLASHCTL_ST_SE); -+ return sfl->blocksize; -+ case BCMA_CC_FLASHT_ATSER: -+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1); -+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE); -+ return sfl->blocksize; -+ } -+ -+ return 0; -+} -+ -+/* -+ * writes the appropriate range of flash, a NULL buf simply erases -+ * the region of flash -+ */ -+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct bcma_sflash *sfl; -+ u8 *block = NULL, *cur_ptr, *blk_ptr; -+ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; -+ u32 blk_offset, blk_len, copied; -+ int bytes, ret = 0; -+ -+ /* Check address range */ -+ if (len <= 0) -+ return 0; -+ -+ sfl = &cc->sflash; -+ if ((offset + len) > sfl->size) -+ return -EINVAL; -+ -+ blocksize = sfl->blocksize; -+ mask = blocksize - 1; -+ -+ /* Allocate a block of mem */ -+ block = kmalloc(blocksize, GFP_KERNEL); -+ if (!block) -+ return -ENOMEM; -+ -+ while (len) { -+ /* Align offset */ -+ cur_offset = offset & ~mask; -+ cur_length = blocksize; -+ cur_ptr = block; -+ -+ remainder = blocksize - (offset & mask); -+ if (len < remainder) -+ cur_retlen = len; -+ else -+ cur_retlen = remainder; -+ -+ /* buf == NULL means erase only */ -+ if (buf) { -+ /* Copy existing data into holding block if necessary */ -+ if ((offset & mask) || (len < blocksize)) { -+ blk_offset = cur_offset; -+ blk_len = cur_length; -+ blk_ptr = cur_ptr; -+ -+ /* Copy entire block */ -+ while (blk_len) { -+ copied = bcma_sflash_read(cc, -+ blk_offset, -+ blk_len, blk_ptr); -+ blk_offset += copied; -+ blk_len -= copied; -+ blk_ptr += copied; -+ } -+ } -+ -+ /* Copy input data into holding block */ -+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); -+ } -+ -+ /* Erase block */ -+ ret = bcma_sflash_erase(cc, cur_offset); -+ if (ret < 0) -+ goto done; -+ -+ while (bcma_sflash_poll(cc, cur_offset)); -+ -+ /* buf == NULL means erase only */ -+ if (!buf) { -+ offset += cur_retlen; -+ len -= cur_retlen; -+ continue; -+ } -+ -+ /* Write holding block */ -+ while (cur_length > 0) { -+ bytes = bcma_sflash_write(cc, cur_offset, -+ cur_length, cur_ptr); -+ -+ if (bytes < 0) { -+ ret = bytes; -+ goto done; -+ } -+ -+ while (bcma_sflash_poll(cc, cur_offset)) -+ ; -+ -+ cur_offset += bytes; -+ cur_length -= bytes; -+ cur_ptr += bytes; -+ } -+ -+ offset += cur_retlen; -+ len -= cur_retlen; -+ buf += cur_retlen; -+ } -+ -+ ret = len; -+done: -+ kfree(block); -+ return ret; -+} ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect( - switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { - case BCMA_CC_FLASHT_STSER: - case BCMA_CC_FLASHT_ATSER: -- pr_err("Serial flash not supported.\n"); -+#ifdef CONFIG_BCMA_SFLASH -+ pr_info("found serial flash.\n"); -+ bus->drv_cc.flash_type = BCMA_SFLASH; -+ bcma_sflash_init(&bus->drv_cc); -+#else -+ pr_info("serial flash not supported.\n"); -+#endif /* CONFIG_BCMA_SFLASH */ - break; - case BCMA_CC_FLASHT_PARA: - pr_info("found parallel flash.\n"); ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu { - #ifdef CONFIG_BCMA_DRIVER_MIPS - enum bcma_flash_type { - BCMA_PFLASH, -+ BCMA_SFLASH, - }; - - struct bcma_pflash { -@@ -383,6 +384,14 @@ struct bcma_pflash { - u32 window_size; - }; - -+#ifdef CONFIG_BCMA_SFLASH -+struct bcma_sflash { -+ u32 blocksize; /* Block size */ -+ u32 numblocks; /* Number of blocks */ -+ u32 size; /* Total size in bytes */ -+}; -+#endif /* CONFIG_BCMA_SFLASH */ -+ - struct bcma_serial_port { - void *regs; - unsigned long clockspeed; -@@ -405,6 +414,9 @@ struct bcma_drv_cc { - enum bcma_flash_type flash_type; - union { - struct bcma_pflash pflash; -+#ifdef CONFIG_BCMA_SFLASH -+ struct bcma_sflash sflash; -+#endif /* CONFIG_BCMA_SFLASH */ - }; - - int nr_serial_ports; -@@ -459,4 +471,16 @@ extern void bcma_chipco_chipctl_maskset( - extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, - u32 offset, u32 mask, u32 set); - -+#ifdef CONFIG_BCMA_SFLASH -+/* Chipcommon sflash support. */ -+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ u8 *buf); -+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset); -+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf); -+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); -+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, -+ const u8 *buf); -+#endif /* CONFIG_BCMA_SFLASH */ -+ - #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch b/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch deleted file mode 100644 index 91d8acb267..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch +++ /dev/null @@ -1,149 +0,0 @@ -From e8afde87ecf56beff67c7d5371cabaa4fc018541 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 23 Jul 2011 23:57:06 +0200 -Subject: [PATCH 14/26] ssb: move flash to chipcommon - - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/nvram.c | 8 +++--- - arch/mips/bcm47xx/wgt634u.c | 8 +++--- - drivers/ssb/driver_mipscore.c | 36 +++++++++++++++++++++------- - include/linux/ssb/ssb_driver_chipcommon.h | 18 ++++++++++++++ - include/linux/ssb/ssb_driver_mips.h | 4 --- - 5 files changed, 53 insertions(+), 21 deletions(-) - ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -27,7 +27,7 @@ static char nvram_buf[NVRAM_SPACE]; - static void early_nvram_init(void) - { - #ifdef CONFIG_BCM47XX_SSB -- struct ssb_mipscore *mcore_ssb; -+ struct ssb_chipcommon *ssb_cc; - #endif - #ifdef CONFIG_BCM47XX_BCMA - struct bcma_drv_cc *bcma_cc; -@@ -42,9 +42,9 @@ static void early_nvram_init(void) - switch (bcm47xx_bus_type) { - #ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: -- mcore_ssb = &bcm47xx_bus.ssb.mipscore; -- base = mcore_ssb->flash_window; -- lim = mcore_ssb->flash_window_size; -+ ssb_cc = &bcm47xx_bus.ssb.chipco; -+ base = ssb_cc->pflash.window; -+ lim = ssb_cc->pflash.window_size; - break; - #endif - #ifdef CONFIG_BCM47XX_BCMA ---- a/arch/mips/bcm47xx/wgt634u.c -+++ b/arch/mips/bcm47xx/wgt634u.c -@@ -156,10 +156,10 @@ static int __init wgt634u_init(void) - SSB_CHIPCO_IRQ_GPIO); - } - -- wgt634u_flash_data.width = mcore->flash_buswidth; -- wgt634u_flash_resource.start = mcore->flash_window; -- wgt634u_flash_resource.end = mcore->flash_window -- + mcore->flash_window_size -+ wgt634u_flash_data.width = mcore->pflash.buswidth; -+ wgt634u_flash_resource.start = mcore->pflash.window; -+ wgt634u_flash_resource.end = mcore->pflash.window -+ + mcore->pflash.window_size - - 1; - return platform_add_devices(wgt634u_devices, - ARRAY_SIZE(wgt634u_devices)); ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -190,16 +190,34 @@ static void ssb_mips_flash_detect(struct - { - struct ssb_bus *bus = mcore->dev->bus; - -- mcore->flash_buswidth = 2; -- if (bus->chipco.dev) { -- mcore->flash_window = 0x1c000000; -- mcore->flash_window_size = 0x02000000; -+ /* When there is no chipcommon on the bus there is 4MB flash */ -+ if (!bus->chipco.dev) { -+ pr_info("found parallel flash.\n"); -+ bus->chipco.flash_type = SSB_PFLASH; -+ bus->chipco.pflash.window = SSB_FLASH1; -+ bus->chipco.pflash.window_size = SSB_FLASH1_SZ; -+ bus->chipco.pflash.buswidth = 2; -+ return; -+ } -+ -+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ case SSB_CHIPCO_FLASHT_ATSER: -+ pr_info("serial flash not supported.\n"); -+ break; -+ case SSB_CHIPCO_FLASHT_PARA: -+ pr_info("found parallel flash.\n"); -+ bus->chipco.flash_type = SSB_PFLASH; -+ bus->chipco.pflash.window = SSB_FLASH2; -+ bus->chipco.pflash.window_size = SSB_FLASH2_SZ; - if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) -- & SSB_CHIPCO_CFG_DS16) == 0) -- mcore->flash_buswidth = 1; -- } else { -- mcore->flash_window = 0x1fc00000; -- mcore->flash_window_size = 0x00400000; -+ & SSB_CHIPCO_CFG_DS16) == 0) -+ bus->chipco.pflash.buswidth = 1; -+ else -+ bus->chipco.pflash.buswidth = 2; -+ break; -+ default: -+ pr_err("flash not supported.\n"); - } - } - ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -582,6 +582,18 @@ struct ssb_chipcommon_pmu { - u32 crystalfreq; /* The active crystal frequency (in kHz) */ - }; - -+#ifdef CONFIG_SSB_DRIVER_MIPS -+enum ssb_flash_type { -+ SSB_PFLASH, -+}; -+ -+struct ssb_pflash { -+ u8 buswidth; -+ u32 window; -+ u32 window_size; -+}; -+#endif /* CONFIG_SSB_DRIVER_MIPS */ -+ - struct ssb_chipcommon { - struct ssb_device *dev; - u32 capabilities; -@@ -589,6 +601,12 @@ struct ssb_chipcommon { - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct ssb_chipcommon_pmu pmu; -+#ifdef CONFIG_SSB_DRIVER_MIPS -+ enum ssb_flash_type flash_type; -+ union { -+ struct ssb_pflash pflash; -+ }; -+#endif /* CONFIG_SSB_DRIVER_MIPS */ - }; - - static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) ---- a/include/linux/ssb/ssb_driver_mips.h -+++ b/include/linux/ssb/ssb_driver_mips.h -@@ -19,10 +19,6 @@ struct ssb_mipscore { - - int nr_serial_ports; - struct ssb_serial_port serial_ports[4]; -- -- u8 flash_buswidth; -- u32 flash_window; -- u32 flash_window_size; - }; - - extern void ssb_mipscore_init(struct ssb_mipscore *mcore); diff --git a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch deleted file mode 100644 index e91c2a44f4..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch +++ /dev/null @@ -1,697 +0,0 @@ -From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 24 Jul 2011 20:20:36 +0200 -Subject: [PATCH 15/26] ssb: add serial flash support - - -Signed-off-by: Hauke Mehrtens ---- - drivers/ssb/Kconfig | 6 + - drivers/ssb/Makefile | 1 + - drivers/ssb/driver_chipcommon_sflash.c | 556 +++++++++++++++++++++++++++++ - drivers/ssb/driver_mipscore.c | 6 + - drivers/ssb/ssb_private.h | 4 + - include/linux/ssb/ssb_driver_chipcommon.h | 30 ++- - 6 files changed, 601 insertions(+), 2 deletions(-) - create mode 100644 drivers/ssb/driver_chipcommon_sflash.c - ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS - - If unsure, say N - -+config SSB_SFLASH -+ bool -+ depends on SSB_DRIVER_MIPS -+ default y -+ -+ - # Assumption: We are on embedded, if we compile the MIPS core. - config SSB_EMBEDDED - bool ---- a/drivers/ssb/Makefile -+++ b/drivers/ssb/Makefile -@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o - # built-in drivers - ssb-y += driver_chipcommon.o - ssb-y += driver_chipcommon_pmu.o -+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o - ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o - ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o - ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o ---- /dev/null -+++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,556 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2011, Jonas Gorski -+ * Copyright 2010, Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+ -+#include "ssb_private.h" -+ -+#define NUM_RETRIES 3 -+ -+ -+/* Issue a serial flash command */ -+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) -+{ -+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, -+ SSB_CHIPCO_FLASHCTL_START | opcode); -+ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL) -+ & SSB_CHIPCO_FLASHCTL_BUSY) -+ ; -+} -+ -+ -+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc, -+ u32 offset, u8 byte) -+{ -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset); -+ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte); -+} -+ -+/* Initialize serial flash access */ -+int ssb_sflash_init(struct ssb_chipcommon *cc) -+{ -+ u32 id, id2; -+ -+ memset(&cc->sflash, 0, sizeof(struct ssb_sflash)); -+ -+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ /* Probe for ST chips */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); -+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); -+ cc->sflash.blocksize = 64 * 1024; -+ switch (id) { -+ case 0x11: -+ /* ST M25P20 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 4; -+ break; -+ case 0x12: -+ /* ST M25P40 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 8; -+ break; -+ case 0x13: -+ /* ST M25P80 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 0x14: -+ /* ST M25P16 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 0x15: -+ /* ST M25P32 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 0x16: -+ /* ST M25P64 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 0x17: -+ /* ST M25FL128 128 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0xbf: -+ /* All of the following flashes are SST with -+ * 4KB subsectors. Others should be added but -+ * We'll have to revamp the way we identify them -+ * since RES is not eough to disambiguate them. -+ */ -+ cc->sflash.blocksize = 4 * 1024; -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); -+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); -+ switch (id2) { -+ case 1: -+ /* SST25WF512 512 Kbit Serial Flash */ -+ case 0x48: -+ /* SST25VF512 512 Kbit Serial Flash */ -+ cc->sflash.numblocks = 16; -+ break; -+ case 2: -+ /* SST25WF010 1 Mbit Serial Flash */ -+ case 0x49: -+ /* SST25VF010 1 Mbit Serial Flash */ -+ cc->sflash.numblocks = 32; -+ break; -+ case 3: -+ /* SST25WF020 2 Mbit Serial Flash */ -+ case 0x43: -+ /* SST25VF020 2 Mbit Serial Flash */ -+ cc->sflash.numblocks = 64; -+ break; -+ case 4: -+ /* SST25WF040 4 Mbit Serial Flash */ -+ case 0x44: -+ /* SST25VF040 4 Mbit Serial Flash */ -+ case 0x8d: -+ /* SST25VF040B 4 Mbit Serial Flash */ -+ cc->sflash.numblocks = 128; -+ break; -+ case 5: -+ /* SST25WF080 8 Mbit Serial Flash */ -+ case 0x8e: -+ /* SST25VF080B 8 Mbit Serial Flash */ -+ cc->sflash.numblocks = 256; -+ break; -+ case 0x41: -+ /* SST25VF016 16 Mbit Serial Flash */ -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x4a: -+ /* SST25VF032 32 Mbit Serial Flash */ -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x4b: -+ /* SST25VF064 64 Mbit Serial Flash */ -+ cc->sflash.numblocks = 2048; -+ break; -+ } -+ break; -+ } -+ break; -+ -+ case SSB_CHIPCO_FLASHT_ATSER: -+ /* Probe for Atmel chips */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); -+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; -+ switch (id) { -+ case 0xc: -+ /* Atmel AT45DB011 1Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 512; -+ break; -+ case 0x14: -+ /* Atmel AT45DB021 2Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 1024; -+ break; -+ case 0x1c: -+ /* Atmel AT45DB041 4Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 2048; -+ break; -+ case 0x24: -+ /* Atmel AT45DB081 8Mbit Serial Flash */ -+ cc->sflash.blocksize = 256; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x2c: -+ /* Atmel AT45DB161 16Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 4096; -+ break; -+ case 0x34: -+ /* Atmel AT45DB321 32Mbit Serial Flash */ -+ cc->sflash.blocksize = 512; -+ cc->sflash.numblocks = 8192; -+ break; -+ case 0x3c: -+ /* Atmel AT45DB642 64Mbit Serial Flash */ -+ cc->sflash.blocksize = 1024; -+ cc->sflash.numblocks = 8192; -+ break; -+ } -+ break; -+ } -+ -+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks; -+ -+ return cc->sflash.size ? 0 : -ENODEV; -+} -+ -+/* Read len bytes starting at offset into buf. Returns number of bytes read. */ -+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ u8 *buf) -+{ -+ u8 *from, *to; -+ u32 cnt, i; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ if ((len >= 4) && (offset & 3)) -+ cnt = 4 - (offset & 3); -+ else if ((len >= 4) && ((u32)buf & 3)) -+ cnt = 4 - ((u32)buf & 3); -+ else -+ cnt = len; -+ -+ -+ if (cc->dev->id.revision == 12) -+ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset); -+ else -+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset); -+ -+ to = (u8 *)buf; -+ -+ if (cnt < 4) { -+ for (i = 0; i < cnt; i++) { -+ *to = readb(from); -+ from++; -+ to++; -+ } -+ return cnt; -+ } -+ -+ while (cnt >= 4) { -+ *(u32 *)to = readl(from); -+ from += 4; -+ to += 4; -+ cnt -= 4; -+ } -+ -+ return len - cnt; -+} -+ -+/* Poll for command completion. Returns zero when complete. */ -+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset) -+{ -+ if (offset >= cc->sflash.size) -+ return -22; -+ -+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ /* Check for ST Write In Progress bit */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR); -+ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA) -+ & SSB_CHIPCO_FLASHSTA_ST_WIP; -+ case SSB_CHIPCO_FLASHT_ATSER: -+ /* Check for Atmel Ready bit */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); -+ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA) -+ & SSB_CHIPCO_FLASHSTA_AT_READY); -+ } -+ -+ return 0; -+} -+ -+ -+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ int ret = 0; -+ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3); -+ u32 mask; -+ -+ -+ /* Enable writes */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN); -+ if (is4712b0) { -+ mask = 1 << 14; -+ ssb_sflash_write_u8(cc, offset, *buf++); -+ /* Set chip select */ -+ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask); -+ /* Issue a page program with the first byte */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, drop cs and return */ -+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask); -+ udelay(1); -+ if (!ssb_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ ssb_sflash_cmd(cc, *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs */ -+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask); -+ udelay(1); -+ if (!ssb_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ } else if (cc->dev->id.revision >= 20) { -+ ssb_sflash_write_u8(cc, offset, *buf++); -+ /* Issue a page program with CSA bit set */ -+ ssb_sflash_cmd(cc, -+ SSB_CHIPCO_FLASHCTL_ST_CSA | -+ SSB_CHIPCO_FLASHCTL_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, poll droping cs and return */ -+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0); -+ udelay(1); -+ if (!ssb_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ ssb_sflash_cmd(cc, -+ SSB_CHIPCO_FLASHCTL_ST_CSA | -+ *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs & poll */ -+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0); -+ udelay(1); -+ if (!ssb_sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -EAGAIN; -+ } -+ } else { -+ ret = 1; -+ ssb_sflash_write_u8(cc, offset, *buf); -+ /* Page program */ -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP); -+ } -+ return ret; -+} -+ -+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct ssb_sflash *sfl = &cc->sflash; -+ u32 page, byte, mask; -+ int ret = 0; -+ mask = sfl->blocksize - 1; -+ page = (offset & ~mask) << 1; -+ byte = offset & mask; -+ /* Read main memory page into buffer 1 */ -+ if (byte || (len < sfl->blocksize)) { -+ int i = 100; -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD); -+ /* 250 us for AT45DB321B */ -+ while (i > 0 && ssb_sflash_poll(cc, offset)) { -+ udelay(10); -+ i--; -+ } -+ BUG_ON(!ssb_sflash_poll(cc, offset)); -+ } -+ /* Write into buffer 1 */ -+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) { -+ ssb_sflash_write_u8(cc, byte++, *buf++); -+ ssb_sflash_cmd(cc, -+ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE); -+ } -+ /* Write buffer 1 into main memory page */ -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM); -+ -+ return ret; -+} -+ -+/* Write len bytes starting at offset into buf. Returns number of bytes -+ * written. Caller should poll for completion. -+ */ -+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct ssb_sflash *sfl; -+ int ret = 0, tries = NUM_RETRIES; -+ -+ if (!len) -+ return 0; -+ -+ if ((offset + len) > cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ do { -+ ret = sflash_st_write(cc, offset, len, buf); -+ tries--; -+ } while (ret == -EAGAIN && tries > 0); -+ -+ if (ret == -EAGAIN && tries == 0) { -+ pr_info("ST Flash rejected write\n"); -+ ret = -EIO; -+ } -+ break; -+ case SSB_CHIPCO_FLASHT_ATSER: -+ ret = sflash_at_write(cc, offset, len, buf); -+ break; -+ } -+ -+ return ret; -+} -+ -+/* Erase a region. Returns number of bytes scheduled for erasure. -+ * Caller should poll for completion. -+ */ -+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset) -+{ -+ struct ssb_sflash *sfl; -+ -+ if (offset >= cc->sflash.size) -+ return -EINVAL; -+ -+ sfl = &cc->sflash; -+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -+ case SSB_CHIPCO_FLASHT_STSER: -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN); -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset); -+ /* Newer flashes have "sub-sectors" which can be erased independently -+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as -+ * before. -+ */ -+ ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE); -+ return sfl->blocksize; -+ case SSB_CHIPCO_FLASHT_ATSER: -+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1); -+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE); -+ return sfl->blocksize; -+ } -+ -+ return 0; -+} -+ -+/* -+ * writes the appropriate range of flash, a NULL buf simply erases -+ * the region of flash -+ */ -+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf) -+{ -+ struct ssb_sflash *sfl; -+ u8 *block = NULL, *cur_ptr, *blk_ptr; -+ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; -+ u32 blk_offset, blk_len, copied; -+ int bytes, ret = 0; -+ -+ /* Check address range */ -+ if (len <= 0) -+ return 0; -+ -+ sfl = &cc->sflash; -+ if ((offset + len) > sfl->size) -+ return -EINVAL; -+ -+ blocksize = sfl->blocksize; -+ mask = blocksize - 1; -+ -+ /* Allocate a block of mem */ -+ block = kmalloc(blocksize, GFP_KERNEL); -+ if (!block) -+ return -ENOMEM; -+ -+ while (len) { -+ /* Align offset */ -+ cur_offset = offset & ~mask; -+ cur_length = blocksize; -+ cur_ptr = block; -+ -+ remainder = blocksize - (offset & mask); -+ if (len < remainder) -+ cur_retlen = len; -+ else -+ cur_retlen = remainder; -+ -+ /* buf == NULL means erase only */ -+ if (buf) { -+ /* Copy existing data into holding block if necessary */ -+ if ((offset & mask) || (len < blocksize)) { -+ blk_offset = cur_offset; -+ blk_len = cur_length; -+ blk_ptr = cur_ptr; -+ -+ /* Copy entire block */ -+ while (blk_len) { -+ copied = ssb_sflash_read(cc, -+ blk_offset, -+ blk_len, blk_ptr); -+ blk_offset += copied; -+ blk_len -= copied; -+ blk_ptr += copied; -+ } -+ } -+ -+ /* Copy input data into holding block */ -+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); -+ } -+ -+ /* Erase block */ -+ ret = ssb_sflash_erase(cc, cur_offset); -+ if (ret < 0) -+ goto done; -+ -+ while (ssb_sflash_poll(cc, cur_offset)); -+ -+ /* buf == NULL means erase only */ -+ if (!buf) { -+ offset += cur_retlen; -+ len -= cur_retlen; -+ continue; -+ } -+ -+ /* Write holding block */ -+ while (cur_length > 0) { -+ bytes = ssb_sflash_write(cc, cur_offset, -+ cur_length, cur_ptr); -+ -+ if (bytes < 0) { -+ ret = bytes; -+ goto done; -+ } -+ -+ while (ssb_sflash_poll(cc, cur_offset)) -+ ; -+ -+ cur_offset += bytes; -+ cur_length -= bytes; -+ cur_ptr += bytes; -+ } -+ -+ offset += cur_retlen; -+ len -= cur_retlen; -+ buf += cur_retlen; -+ } -+ -+ ret = len; -+done: -+ kfree(block); -+ return ret; -+} ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct - switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { - case SSB_CHIPCO_FLASHT_STSER: - case SSB_CHIPCO_FLASHT_ATSER: -+#ifdef CONFIG_SSB_SFLASH -+ pr_info("found serial flash.\n"); -+ bus->chipco.flash_type = SSB_SFLASH; -+ ssb_sflash_init(&bus->chipco); -+#else - pr_info("serial flash not supported.\n"); -+#endif /* CONFIG_SSB_SFLASH */ - break; - case SSB_CHIPCO_FLASHT_PARA: - pr_info("found parallel flash.\n"); ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb - extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); - - -+#ifdef CONFIG_SSB_SFLASH -+/* driver_chipcommon_sflash.c */ -+int ssb_sflash_init(struct ssb_chipcommon *cc); -+#endif /* CONFIG_SSB_SFLASH */ - - /* b43_pci_bridge.c */ - #ifdef CONFIG_SSB_B43_PCI_BRIDGE ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -503,8 +503,10 @@ - #define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */ - #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ - #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ --#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ --#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ -+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */ -+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */ -+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ -+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ - - /* Status register bits for ST flashes */ - #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ -@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu { - #ifdef CONFIG_SSB_DRIVER_MIPS - enum ssb_flash_type { - SSB_PFLASH, -+ SSB_SFLASH, - }; - - struct ssb_pflash { -@@ -592,6 +595,14 @@ struct ssb_pflash { - u32 window; - u32 window_size; - }; -+ -+#ifdef CONFIG_SSB_SFLASH -+struct ssb_sflash { -+ u32 blocksize; /* Block size */ -+ u32 numblocks; /* Number of blocks */ -+ u32 size; /* Total size in bytes */ -+}; -+#endif /* CONFIG_SSB_SFLASH */ - #endif /* CONFIG_SSB_DRIVER_MIPS */ - - struct ssb_chipcommon { -@@ -605,6 +616,9 @@ struct ssb_chipcommon { - enum ssb_flash_type flash_type; - union { - struct ssb_pflash pflash; -+#ifdef CONFIG_SSB_SFLASH -+ struct ssb_sflash sflash; -+#endif /* CONFIG_SSB_SFLASH */ - }; - #endif /* CONFIG_SSB_DRIVER_MIPS */ - }; -@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct - struct ssb_serial_port *ports); - #endif /* CONFIG_SSB_SERIAL */ - -+#ifdef CONFIG_SSB_SFLASH -+/* Chipcommon sflash support. */ -+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ u8 *buf); -+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset); -+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf); -+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset); -+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len, -+ const u8 *buf); -+#endif /* CONFIG_SSB_SFLASH */ -+ - /* PMU support */ - extern void ssb_pmu_init(struct ssb_chipcommon *cc); - diff --git a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch b/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch deleted file mode 100644 index 841c44dc2a..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch +++ /dev/null @@ -1,193 +0,0 @@ -From 4f314ac9edbc80897f158fdb4e1b1de8a2d0d432 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 24 Jul 2011 21:10:49 +0200 -Subject: [PATCH 16/26] brcm47xx: add common interface for sflash - - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/Makefile | 2 +- - arch/mips/bcm47xx/bus.c | 94 ++++++++++++++++++++++++++++++ - arch/mips/bcm47xx/setup.c | 8 +++ - arch/mips/include/asm/mach-bcm47xx/bus.h | 37 ++++++++++++ - 4 files changed, 140 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm47xx/bus.c - create mode 100644 arch/mips/include/asm/mach-bcm47xx/bus.h - ---- a/arch/mips/bcm47xx/Makefile -+++ b/arch/mips/bcm47xx/Makefile -@@ -3,5 +3,5 @@ - # under Linux. - # - --obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o -+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o - obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o ---- /dev/null -+++ b/arch/mips/bcm47xx/bus.c -@@ -0,0 +1,94 @@ -+/* -+ * BCM947xx nvram variable access -+ * -+ * Copyright (C) 2011 Hauke Mehrtens -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+ -+static int bcm47xx_sflash_bcma_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf) -+{ -+ return bcma_sflash_read(dev->bcc, offset, len, buf); -+} -+ -+static int bcm47xx_sflash_bcma_poll(struct bcm47xx_sflash *dev, u32 offset) -+{ -+ return bcma_sflash_poll(dev->bcc, offset); -+} -+ -+static int bcm47xx_sflash_bcma_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf) -+{ -+ return bcma_sflash_write(dev->bcc, offset, len, buf); -+} -+ -+static int bcm47xx_sflash_bcma_erase(struct bcm47xx_sflash *dev, u32 offset) -+{ -+ return bcma_sflash_erase(dev->bcc, offset); -+} -+ -+static int bcm47xx_sflash_bcma_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf) -+{ -+ return bcma_sflash_commit(dev->bcc, offset, len, buf); -+} -+ -+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc) -+{ -+ sflash->sflash_type = BCM47XX_BUS_TYPE_BCMA; -+ sflash->bcc = bcc; -+ -+ sflash->read = bcm47xx_sflash_bcma_read; -+ sflash->poll = bcm47xx_sflash_bcma_poll; -+ sflash->write = bcm47xx_sflash_bcma_write; -+ sflash->erase = bcm47xx_sflash_bcma_erase; -+ sflash->commit = bcm47xx_sflash_bcma_commit; -+ -+ sflash->blocksize = bcc->sflash.blocksize; -+ sflash->numblocks = bcc->sflash.numblocks; -+ sflash->size = bcc->sflash.size; -+} -+ -+static int bcm47xx_sflash_ssb_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf) -+{ -+ return ssb_sflash_read(dev->scc, offset, len, buf); -+} -+ -+static int bcm47xx_sflash_ssb_poll(struct bcm47xx_sflash *dev, u32 offset) -+{ -+ return ssb_sflash_poll(dev->scc, offset); -+} -+ -+static int bcm47xx_sflash_ssb_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf) -+{ -+ return ssb_sflash_write(dev->scc, offset, len, buf); -+} -+ -+static int bcm47xx_sflash_ssb_erase(struct bcm47xx_sflash *dev, u32 offset) -+{ -+ return ssb_sflash_erase(dev->scc, offset); -+} -+ -+static int bcm47xx_sflash_ssb_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf) -+{ -+ return ssb_sflash_commit(dev->scc, offset, len, buf); -+} -+ -+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc) -+{ -+ sflash->sflash_type = BCM47XX_BUS_TYPE_SSB; -+ sflash->scc = scc; -+ -+ sflash->read = bcm47xx_sflash_ssb_read; -+ sflash->poll = bcm47xx_sflash_ssb_poll; -+ sflash->write = bcm47xx_sflash_ssb_write; -+ sflash->erase = bcm47xx_sflash_ssb_erase; -+ sflash->commit = bcm47xx_sflash_ssb_commit; -+ -+ sflash->blocksize = scc->sflash.blocksize; -+ sflash->numblocks = scc->sflash.numblocks; -+ sflash->size = scc->sflash.size; -+} ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -42,6 +42,8 @@ EXPORT_SYMBOL(bcm47xx_bus); - enum bcm47xx_bus_type bcm47xx_bus_type; - EXPORT_SYMBOL(bcm47xx_bus_type); - -+struct bcm47xx_sflash bcm47xx_sflash; -+ - static void bcm47xx_machine_restart(char *command) - { - printk(KERN_ALERT "Please stand by while rebooting the system...\n"); -@@ -290,6 +292,9 @@ static void __init bcm47xx_register_ssb( - if (err) - panic("Failed to initialize SSB bus (err %d)\n", err); - -+ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH) -+ bcm47xx_sflash_struct_ssb_init(&bcm47xx_sflash, &bcm47xx_bus.ssb.chipco); -+ - mcore = &bcm47xx_bus.ssb.mipscore; - if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { - if (strstr(buf, "console=ttyS1")) { -@@ -314,6 +319,9 @@ static void __init bcm47xx_register_bcma - err = bcma_host_soc_register(&bcm47xx_bus.bcma); - if (err) - panic("Failed to initialize BCMA bus (err %d)\n", err); -+ -+ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH) -+ bcm47xx_sflash_struct_bcma_init(&bcm47xx_sflash, &bcm47xx_bus.bcma.bus.drv_cc); - } - #endif - ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h -@@ -0,0 +1,37 @@ -+/* -+ * BCM947xx nvram variable access -+ * -+ * Copyright (C) 2011 Hauke Mehrtens -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+#include -+#include -+ -+struct bcm47xx_sflash { -+ enum bcm47xx_bus_type sflash_type; -+ union { -+ struct ssb_chipcommon *scc; -+ struct bcma_drv_cc *bcc; -+ }; -+ -+ int (*read)(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf); -+ int (*poll)(struct bcm47xx_sflash *dev, u32 offset); -+ int (*write)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf); -+ int (*erase)(struct bcm47xx_sflash *dev, u32 offset); -+ int (*commit)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf); -+ -+ u32 blocksize; /* Block size */ -+ u32 numblocks; /* Number of blocks */ -+ u32 size; /* Total size in bytes */ -+}; -+ -+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc); -+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc); -+ -+extern struct bcm47xx_sflash bcm47xx_sflash; diff --git a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch b/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch deleted file mode 100644 index 284b83aa52..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch +++ /dev/null @@ -1,579 +0,0 @@ -From 1934b89b42976a083c2ad8d8fdc526ab5b05c5e4 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 14:54:11 +0200 -Subject: [PATCH 17/26] mtd: bcm47xx: add bcm47xx part parser - - -Signed-off-by: Hauke Mehrtens ---- - drivers/mtd/Kconfig | 7 + - drivers/mtd/Makefile | 1 + - drivers/mtd/bcm47xxpart.c | 536 +++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 544 insertions(+), 0 deletions(-) - create mode 100644 drivers/mtd/bcm47xxpart.c - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -173,6 +173,13 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_BCM47XX_PARTS -+ tristate "BCM47XX partitioning support" -+ default y -+ depends on BCM47XX -+ ---help--- -+ bcm47XX partitioning support -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o ---- /dev/null -+++ b/drivers/mtd/bcm47xxpart.c -@@ -0,0 +1,536 @@ -+/* -+ * Copyright (C) 2006 Felix Fietkau -+ * Copyright (C) 2005 Waldemar Brodkorb -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * original functions for finding root filesystem from Mike Baker -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Flash mapping for BCM947XX boards -+ */ -+ -+#define pr_fmt(fmt) "bcm47xx_part: " fmt -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define TRX_MAGIC 0x30524448 /* "HDR0" */ -+#define TRX_VERSION 1 -+#define TRX_MAX_LEN 0x3A0000 -+#define TRX_NO_HEADER 1 /* Do not write TRX header */ -+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -+#define TRX_MAX_OFFSET 3 -+ -+struct trx_header { -+ u32 magic; /* "HDR0" */ -+ u32 len; /* Length of file including header */ -+ u32 crc32; /* 32-bit CRC from flag_version to end of file */ -+ u32 flag_version; /* 0:15 flags, 16:31 version */ -+ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -+}; -+ -+/* for Edimax Print servers which use an additional header -+ * then the firmware on flash looks like : -+ * EDIMAX HEADER | TRX HEADER -+ * As this header is 12 bytes long we have to handle it -+ * and skip it to find the TRX header -+ */ -+#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */ -+#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */ -+ -+#define NVRAM_SPACE 0x8000 -+ -+#define ROUTER_NETGEAR_WGR614L 1 -+#define ROUTER_NETGEAR_WNR834B 2 -+#define ROUTER_NETGEAR_WNDR3300 3 -+#define ROUTER_NETGEAR_WNR3500L 4 -+#define ROUTER_SIMPLETECH_SIMPLESHARE 5 -+ -+static struct mtd_partition bcm47xx_parts[] = { -+ { name: "cfe", offset:0, size:0, mask_flags:MTD_WRITEABLE, }, -+ { name: "linux", offset:0, size:0, }, -+ { name: "rootfs", offset:0, size:0, }, -+ { name: "nvram", offset:0, size:0, }, -+ { name: NULL, }, /* Used to create custom partitons with the function get_router() */ -+ { name: NULL, }, -+}; -+ -+static int -+find_cfe_size(struct mtd_info *mtd) -+{ -+ struct trx_header *trx; -+ unsigned char buf[512]; -+ int off; -+ size_t len; -+ int blocksize; -+ -+ trx = (struct trx_header *) buf; -+ -+ blocksize = mtd->erasesize; -+ if (blocksize < 0x10000) -+ blocksize = 0x10000; -+ -+ for (off = (128*1024); off < mtd->size; off += blocksize) { -+ memset(buf, 0xe5, sizeof(buf)); -+ -+ /* -+ * Read into buffer -+ */ -+ if (mtd->read(mtd, off, sizeof(buf), &len, buf) || -+ len != sizeof(buf)) -+ continue; -+ -+ if (le32_to_cpu(trx->magic) == EDIMAX_PS_HEADER_MAGIC) { -+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN, -+ sizeof(buf), &len, buf) || len != sizeof(buf)) { -+ continue; -+ } else { -+ pr_notice("Found edimax header\n"); -+ } -+ } -+ -+ /* found a TRX header */ -+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) -+ goto found; -+ } -+ -+ pr_notice("%s: Couldn't find bootloader size\n", mtd->name); -+ return -1; -+ -+ found: -+ pr_notice("bootloader size: %d\n", off); -+ return off; -+ -+} -+ -+/* -+ * Copied from mtdblock.c -+ * -+ * Cache stuff... -+ * -+ * Since typical flash erasable sectors are much larger than what Linux's -+ * buffer cache can handle, we must implement read-modify-write on flash -+ * sectors for each block write requests. To avoid over-erasing flash sectors -+ * and to speed things up, we locally cache a whole flash sector while it is -+ * being written to until a different sector is required. -+ */ -+ -+static void erase_callback(struct erase_info *done) -+{ -+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; -+ wake_up(wait_q); -+} -+ -+static int erase_write(struct mtd_info *mtd, unsigned long pos, -+ int len, const char *buf) -+{ -+ struct erase_info erase; -+ DECLARE_WAITQUEUE(wait, current); -+ wait_queue_head_t wait_q; -+ size_t retlen; -+ int ret; -+ -+ /* -+ * First, let's erase the flash block. -+ */ -+ -+ init_waitqueue_head(&wait_q); -+ erase.mtd = mtd; -+ erase.callback = erase_callback; -+ erase.addr = pos; -+ erase.len = len; -+ erase.priv = (u_long)&wait_q; -+ -+ set_current_state(TASK_INTERRUPTIBLE); -+ add_wait_queue(&wait_q, &wait); -+ -+ ret = mtd->erase(mtd, &erase); -+ if (ret) { -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&wait_q, &wait); -+ pr_warn("erase of region [0x%lx, 0x%x] on \"%s\" failed\n", -+ pos, len, mtd->name); -+ return ret; -+ } -+ -+ schedule(); /* Wait for erase to finish. */ -+ remove_wait_queue(&wait_q, &wait); -+ -+ /* -+ * Next, write data to flash. -+ */ -+ -+ ret = mtd->write(mtd, pos, len, &retlen, buf); -+ if (ret) -+ return ret; -+ if (retlen != len) -+ return -EIO; -+ return 0; -+} -+ -+ -+static int -+find_dual_image_off(struct mtd_info *mtd) -+{ -+ struct trx_header trx; -+ int off, blocksize; -+ size_t len; -+ -+ blocksize = mtd->erasesize; -+ if (blocksize < 0x10000) -+ blocksize = 0x10000; -+ -+ for (off = (128*1024); off < mtd->size; off += blocksize) { -+ memset(&trx, 0xe5, sizeof(trx)); -+ /* -+ * Read into buffer -+ */ -+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) || -+ len != sizeof(trx)) -+ continue; -+ /* found last TRX header */ -+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) { -+ if (le32_to_cpu(trx.flag_version >> 16) == 2) { -+ pr_notice("dual image TRX header found\n"); -+ return mtd->size / 2; -+ } else { -+ return 0; -+ } -+ } -+ } -+ return 0; -+} -+ -+ -+static int -+find_root(struct mtd_info *mtd, struct mtd_partition *part) -+{ -+ struct trx_header trx, *trx2; -+ unsigned char buf[512], *block; -+ int off, blocksize, trxoff = 0; -+ u32 i, crc = ~0; -+ size_t len; -+ bool edimax = false; -+ -+ blocksize = mtd->erasesize; -+ if (blocksize < 0x10000) -+ blocksize = 0x10000; -+ -+ for (off = (128*1024); off < mtd->size; off += blocksize) { -+ memset(&trx, 0xe5, sizeof(trx)); -+ -+ /* -+ * Read into buffer -+ */ -+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) || -+ len != sizeof(trx)) -+ continue; -+ -+ /* found an edimax header */ -+ if (le32_to_cpu(trx.magic) == EDIMAX_PS_HEADER_MAGIC) { -+ /* read the correct trx header */ -+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN, -+ sizeof(trx), &len, (char *) &trx) || -+ len != sizeof(trx)) { -+ continue; -+ } else { -+ pr_notice("Found an edimax ps header\n"); -+ edimax = true; -+ } -+ } -+ -+ /* found a TRX header */ -+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) { -+ part->offset = le32_to_cpu(trx.offsets[2]) ? : -+ le32_to_cpu(trx.offsets[1]); -+ part->size = le32_to_cpu(trx.len); -+ -+ part->size -= part->offset; -+ part->offset += off; -+ if (edimax) { -+ off += EDIMAX_PS_HEADER_LEN; -+ trxoff = EDIMAX_PS_HEADER_LEN; -+ } -+ -+ goto found; -+ } -+ } -+ -+ pr_warn("%s: Couldn't find root filesystem\n", -+ mtd->name); -+ return -1; -+ -+ found: -+ pr_notice("TRX offset : %x\n", trxoff); -+ if (part->size == 0) -+ return 0; -+ -+ if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf)) -+ return 0; -+ -+ /* Move the fs outside of the trx */ -+ part->size = 0; -+ -+ if (trx.len != part->offset + part->size - off) { -+ /* Update the trx offsets and length */ -+ trx.len = part->offset + part->size - off; -+ -+ /* Update the trx crc32 */ -+ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) { -+ if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf)) -+ return 0; -+ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i)); -+ } -+ trx.crc32 = crc; -+ -+ /* read first eraseblock from the trx */ -+ block = kmalloc(mtd->erasesize, GFP_KERNEL); -+ trx2 = (struct trx_header *) block; -+ if (mtd->read(mtd, off - trxoff, mtd->erasesize, &len, block) || len != mtd->erasesize) { -+ pr_err("Error accessing the first trx eraseblock\n"); -+ return 0; -+ } -+ -+ pr_notice("Updating TRX offsets and length:\n"); -+ pr_notice("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32); -+ pr_notice("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32); -+ -+ /* Write updated trx header to the flash */ -+ memcpy(block + trxoff, &trx, sizeof(trx)); -+ if (mtd->unlock) -+ mtd->unlock(mtd, off - trxoff, mtd->erasesize); -+ erase_write(mtd, off - trxoff, mtd->erasesize, block); -+ if (mtd->sync) -+ mtd->sync(mtd); -+ kfree(block); -+ pr_notice("Done\n"); -+ } -+ -+ return part->size; -+} -+ -+static int get_router(void) -+{ -+ char buf[20]; -+ u32 boardnum = 0; -+ u16 boardtype = 0; -+ u16 boardrev = 0; -+ u32 boardflags = 0; -+ u16 sdram_init = 0; -+ u16 cardbus = 0; -+ u16 strev = 0; -+ -+ if (nvram_getenv("boardnum", buf, sizeof(buf)) >= 0) -+ boardnum = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) -+ boardtype = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) -+ boardrev = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) -+ boardflags = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("sdram_init", buf, sizeof(buf)) >= 0) -+ sdram_init = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) -+ cardbus = simple_strtoul(buf, NULL, 0); -+ if (nvram_getenv("st_rev", buf, sizeof(buf)) >= 0) -+ strev = simple_strtoul(buf, NULL, 0); -+ -+ if ((boardnum == 8 || boardnum == 01) -+ && boardtype == 0x0472 && cardbus == 1) { -+ /* Netgear WNR834B, Netgear WNR834Bv2 */ -+ return ROUTER_NETGEAR_WNR834B; -+ } -+ -+ if (boardnum == 01 && boardtype == 0x0472 && boardrev == 0x23) { -+ /* Netgear WNDR-3300 */ -+ return ROUTER_NETGEAR_WNDR3300; -+ } -+ -+ if ((boardnum == 83258 || boardnum == 01) -+ && boardtype == 0x048e -+ && (boardrev == 0x11 || boardrev == 0x10) -+ && boardflags == 0x750 -+ && sdram_init == 0x000A) { -+ /* Netgear WGR614v8/L/WW 16MB ram, cfe v1.3 or v1.5 */ -+ return ROUTER_NETGEAR_WGR614L; -+ } -+ -+ if ((boardnum == 1 || boardnum == 3500) -+ && boardtype == 0x04CF -+ && (boardrev == 0x1213 || boardrev == 02)) { -+ /* Netgear WNR3500v2/U/L */ -+ return ROUTER_NETGEAR_WNR3500L; -+ } -+ -+ if (boardtype == 0x042f -+ && boardrev == 0x10 -+ && boardflags == 0 -+ && strev == 0x11) { -+ /* Simpletech Simpleshare */ -+ return ROUTER_SIMPLETECH_SIMPLESHARE; -+ } -+ -+ return 0; -+} -+ -+static int parse_bcm47xx_partitions(struct mtd_info *mtd, -+ struct mtd_partition **pparts, -+// struct mtd_part_parser_data *data) -+ unsigned long data) -+{ -+ int cfe_size; -+ int dual_image_offset = 0; -+ /* e.g Netgear 0x003e0000-0x003f0000 : "board_data", we exclude this -+ * part from our mapping to prevent overwriting len/checksum on e.g. -+ * Netgear WGR614v8/L/WW -+ */ -+ int custom_data_size = 0; -+ -+ cfe_size = find_cfe_size(mtd); -+ if (cfe_size < 0) -+ return 0; -+ -+ /* boot loader */ -+ bcm47xx_parts[0].offset = 0; -+ bcm47xx_parts[0].size = cfe_size; -+ -+ /* nvram */ -+ if (cfe_size != 384 * 1024) { -+ -+ switch (get_router()) { -+ case ROUTER_NETGEAR_WGR614L: -+ case ROUTER_NETGEAR_WNR834B: -+ case ROUTER_NETGEAR_WNDR3300: -+ case ROUTER_NETGEAR_WNR3500L: -+ /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum -+ * is @ 0x007AFFF8 for 8M flash -+ */ -+ custom_data_size = mtd->erasesize; -+ -+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize); -+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize); -+ -+ /* Place CFE board_data into a partition */ -+ bcm47xx_parts[4].name = "board_data"; -+ bcm47xx_parts[4].offset = bcm47xx_parts[3].offset - custom_data_size; -+ bcm47xx_parts[4].size = custom_data_size; -+ break; -+ -+ case ROUTER_SIMPLETECH_SIMPLESHARE: -+ /* Fixup Simpletech Simple share nvram */ -+ -+ pr_notice("Setting up simpletech nvram\n"); -+ custom_data_size = mtd->erasesize; -+ -+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize) * 2; -+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize); -+ -+ /* Place backup nvram into a partition */ -+ bcm47xx_parts[4].name = "nvram_copy"; -+ bcm47xx_parts[4].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize); -+ bcm47xx_parts[4].size = roundup(NVRAM_SPACE, mtd->erasesize); -+ break; -+ -+ default: -+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize); -+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize); -+ } -+ -+ } else { -+ /* nvram (old 128kb config partition on netgear wgt634u) */ -+ bcm47xx_parts[3].offset = bcm47xx_parts[0].size; -+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize); -+ } -+ -+ /* dual image offset*/ -+ pr_notice("Looking for dual image\n"); -+ dual_image_offset = find_dual_image_off(mtd); -+ /* linux (kernel and rootfs) */ -+ if (cfe_size != 384 * 1024) { -+ if (get_router() == ROUTER_SIMPLETECH_SIMPLESHARE) { -+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size; -+ bcm47xx_parts[1].size = bcm47xx_parts[4].offset - dual_image_offset - -+ bcm47xx_parts[1].offset - custom_data_size; -+ } else { -+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size; -+ bcm47xx_parts[1].size = bcm47xx_parts[3].offset - dual_image_offset - -+ bcm47xx_parts[1].offset - custom_data_size; -+ } -+ } else { -+ /* do not count the elf loader, which is on one block */ -+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size + -+ bcm47xx_parts[3].size + mtd->erasesize; -+ bcm47xx_parts[1].size = mtd->size - -+ bcm47xx_parts[0].size - -+ (2*bcm47xx_parts[3].size) - -+ mtd->erasesize - custom_data_size; -+ } -+ -+ /* find and size rootfs */ -+ find_root(mtd, &bcm47xx_parts[2]); -+ bcm47xx_parts[2].size = mtd->size - dual_image_offset - -+ bcm47xx_parts[2].offset - -+ bcm47xx_parts[3].size - custom_data_size; -+ *pparts = bcm47xx_parts; -+ return bcm47xx_parts[4].name == NULL ? 4 : 5; -+} -+ -+static struct mtd_part_parser bcm47xx_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_bcm47xx_partitions, -+ .name = "bcm47xx", -+}; -+ -+static int __init bcm47xx_parser_init(void) -+{ -+ return register_mtd_parser(&bcm47xx_parser); -+} -+ -+static void __exit bcm47xx_parser_exit(void) -+{ -+ deregister_mtd_parser(&bcm47xx_parser); -+} -+ -+module_init(bcm47xx_parser_init); -+module_exit(bcm47xx_parser_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Parsing code for flash partitions on bcm47xx SoCs"); diff --git a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch deleted file mode 100644 index 0ab81f33b8..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch +++ /dev/null @@ -1,240 +0,0 @@ -From fb261916ee9cd9eede57f6255ffd39e4145da48e Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 14:55:18 +0200 -Subject: [PATCH 18/26] mtd: bcm47xx: add parallel flash driver - - -Signed-off-by: Hauke Mehrtens ---- - drivers/mtd/maps/Kconfig | 9 ++ - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/maps/bcm47xx-pflash.c | 198 +++++++++++++++++++++++++++++++++++++ - 3 files changed, 208 insertions(+), 0 deletions(-) - create mode 100644 drivers/mtd/maps/bcm47xx-pflash.c - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -264,6 +264,15 @@ config MTD_LANTIQ - help - Support for NOR flash attached to the Lantiq SoC's External Bus Unit. - -+config MTD_BCM47XX_PFLASH -+ tristate "bcm47xx parallel flash support" -+ default y -+ depends on BCM47XX -+ select MTD_PARTITIONS -+ select MTD_BCM47XX_PARTS -+ help -+ Support for bcm47xx parallel flash -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CFI_INTELEXT && BROKEN ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr - obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o - obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o - obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o -+obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o ---- /dev/null -+++ b/drivers/mtd/maps/bcm47xx-pflash.c -@@ -0,0 +1,198 @@ -+/* -+ * Copyright (C) 2006 Felix Fietkau -+ * Copyright (C) 2005 Waldemar Brodkorb -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * original functions for finding root filesystem from Mike Baker -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Flash mapping for BCM947XX boards -+ */ -+ -+#define pr_fmt(fmt) "bcm47xx_pflash: " fmt -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define WINDOW_ADDR 0x1fc00000 -+#define WINDOW_SIZE 0x400000 -+#define BUSWIDTH 2 -+ -+static struct mtd_info *bcm47xx_mtd; -+ -+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ if (len == 1) { -+ memcpy_fromio(to, map->virt + from, len); -+ } else { -+ int i; -+ u16 *dest = (u16 *) to; -+ u16 *src = (u16 *) (map->virt + from); -+ for (i = 0; i < (len / 2); i++) -+ dest[i] = src[i]; -+ if (len & 1) -+ *((u8 *)dest+len-1) = src[i] & 0xff; -+ } -+} -+ -+static struct map_info bcm47xx_map = { -+ name: "Physically mapped flash", -+ size : WINDOW_SIZE, -+ bankwidth : BUSWIDTH, -+ phys : WINDOW_ADDR, -+}; -+ -+static const char *probes[] = { "bcm47xx", NULL }; -+ -+static int bcm47xx_mtd_probe(struct platform_device *pdev) -+{ -+#ifdef CONFIG_BCM47XX_SSB -+ struct ssb_chipcommon *ssb_cc; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ struct bcma_drv_cc *bcma_cc; -+#endif -+ int ret = 0; -+ struct mtd_partition *partitions = NULL; -+ int num_partitions = 0; -+ -+ switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB -+ case BCM47XX_BUS_TYPE_SSB: -+ ssb_cc = &bcm47xx_bus.ssb.chipco; -+ if (ssb_cc->flash_type != SSB_PFLASH) -+ return -ENODEV; -+ -+ bcm47xx_map.phys = ssb_cc->pflash.window; -+ bcm47xx_map.size = ssb_cc->pflash.window_size; -+ bcm47xx_map.bankwidth = ssb_cc->pflash.buswidth; -+ break; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; -+ if (bcma_cc->flash_type != BCMA_PFLASH) -+ return -ENODEV; -+ -+ bcm47xx_map.phys = bcma_cc->pflash.window; -+ bcm47xx_map.size = bcma_cc->pflash.window_size; -+ bcm47xx_map.bankwidth = bcma_cc->pflash.buswidth; -+ break; -+#endif -+ } -+ -+ pr_notice("flash init: 0x%08x 0x%08lx\n", bcm47xx_map.phys, bcm47xx_map.size); -+ bcm47xx_map.virt = ioremap_nocache(bcm47xx_map.phys, bcm47xx_map.size); -+ -+ if (!bcm47xx_map.virt) { -+ pr_err("Failed to ioremap\n"); -+ return -EIO; -+ } -+ -+ simple_map_init(&bcm47xx_map); -+ /* override copy_from routine */ -+ bcm47xx_map.copy_from = bcm47xx_map_copy_from; -+ -+ bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map); -+ if (!bcm47xx_mtd) { -+ pr_err("Failed to do_map_probe\n"); -+ ret = -ENXIO; -+ goto err_unmap; -+ } -+ bcm47xx_mtd->owner = THIS_MODULE; -+ -+ pr_notice("Flash device: 0x%lx at 0x%x\n", bcm47xx_map.size, WINDOW_ADDR); -+ -+ num_partitions = parse_mtd_partitions(bcm47xx_mtd, probes, &partitions, 0); -+ if (num_partitions < 0) { -+ ret = num_partitions; -+ goto err_unmap; -+ } -+ -+ ret = mtd_device_register(bcm47xx_mtd, partitions, num_partitions); -+ -+// ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0); -+ -+ if (ret) { -+ pr_err("Flash: mtd_device_register failed\n"); -+ goto err_destroy; -+ } -+ return 0; -+ -+err_destroy: -+ map_destroy(bcm47xx_mtd); -+err_unmap: -+ iounmap(bcm47xx_map.virt); -+ return ret; -+} -+ -+static int __devexit bcm47xx_mtd_remove(struct platform_device *pdev) -+{ -+ mtd_device_unregister(bcm47xx_mtd); -+ map_destroy(bcm47xx_mtd); -+ iounmap(bcm47xx_map.virt); -+ return 0; -+} -+ -+static struct platform_driver bcm47xx_mtd_driver = { -+ .remove = __devexit_p(bcm47xx_mtd_remove), -+ .driver = { -+ .name = "bcm47xx_pflash", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init init_bcm47xx_mtd(void) -+{ -+ int ret = platform_driver_probe(&bcm47xx_mtd_driver, bcm47xx_mtd_probe); -+ -+ if (ret) -+ pr_err("error registering platform driver: %i\n", ret); -+ return ret; -+} -+ -+static void __exit exit_bcm47xx_mtd(void) -+{ -+ platform_driver_unregister(&bcm47xx_mtd_driver); -+} -+ -+module_init(init_bcm47xx_mtd); -+module_exit(exit_bcm47xx_mtd); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("BCM47XX parallel flash driver"); diff --git a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch deleted file mode 100644 index d9f961081d..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch +++ /dev/null @@ -1,330 +0,0 @@ -From 6a615274708fff685952139fee00ebccc0cf3266 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 14:55:45 +0200 -Subject: [PATCH 19/26] mtd: bcm47xx: add serial flash driver - -sflash get the sflash ops from platform device - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/include/asm/mach-bcm47xx/bus.h | 3 + - drivers/mtd/maps/Kconfig | 9 + - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/maps/bcm47xx-sflash.c | 267 ++++++++++++++++++++++++++++++ - 4 files changed, 280 insertions(+), 0 deletions(-) - create mode 100644 drivers/mtd/maps/bcm47xx-sflash.c - ---- a/arch/mips/include/asm/mach-bcm47xx/bus.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h -@@ -11,6 +11,7 @@ - - #include - #include -+#include - #include - - struct bcm47xx_sflash { -@@ -29,6 +30,8 @@ struct bcm47xx_sflash { - u32 blocksize; /* Block size */ - u32 numblocks; /* Number of blocks */ - u32 size; /* Total size in bytes */ -+ -+ struct mtd_info *mtd; - }; - - void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc); ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -273,6 +273,15 @@ config MTD_BCM47XX_PFLASH - help - Support for bcm47xx parallel flash - -+config MTD_BCM47XX_SFLASH -+ tristate "bcm47xx serial flash support" -+ default y -+ depends on BCM47XX -+ select MTD_PARTITIONS -+ select MTD_BCM47XX_PARTS -+ help -+ Support for bcm47xx parallel flash -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CFI_INTELEXT && BROKEN ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-f - obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o - obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o - obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o -+obj-$(CONFIG_MTD_BCM47XX_SFLASH)+= bcm47xx-sflash.o ---- /dev/null -+++ b/drivers/mtd/maps/bcm47xx-sflash.c -@@ -0,0 +1,267 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2006, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#define pr_fmt(fmt) "bcm47xx_sflash: " fmt -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int -+sflash_mtd_poll(struct bcm47xx_sflash *sflash, unsigned int offset, int timeout) -+{ -+ unsigned long now = jiffies; -+ int ret = 0; -+ -+ for (;;) { -+ if (!sflash->poll(sflash, offset)) { -+ ret = 0; -+ break; -+ } -+ if (time_after(jiffies, now + timeout)) { -+ pr_err("timeout while polling\n"); -+ ret = -ETIMEDOUT; -+ break; -+ } -+ udelay(1); -+ } -+ -+ return ret; -+} -+ -+static int -+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) -+{ -+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv; -+ -+ /* Check address range */ -+ if (!len) -+ return 0; -+ -+ if ((from + len) > mtd->size) -+ return -EINVAL; -+ -+ *retlen = 0; -+ -+ while (len) { -+ int ret = sflash->read(sflash, from, len, buf); -+ if (ret < 0) -+ return ret; -+ -+ from += (loff_t) ret; -+ len -= ret; -+ buf += ret; -+ *retlen += ret; -+ } -+ -+ return 0; -+} -+ -+static int -+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) -+{ -+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv; -+ -+ /* Check address range */ -+ if (!len) -+ return 0; -+ -+ if ((to + len) > mtd->size) -+ return -EINVAL; -+ -+ *retlen = 0; -+ while (len) { -+ int bytes; -+ int ret = sflash->write(sflash, to, len, buf); -+ if (ret < 0) -+ return ret; -+ -+ bytes = ret; -+ -+ ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10); -+ if (ret) -+ return ret; -+ -+ to += (loff_t) bytes; -+ len -= bytes; -+ buf += bytes; -+ *retlen += bytes; -+ } -+ -+ return 0; -+} -+ -+static int -+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) -+{ -+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv; -+ int i, j, ret = 0; -+ unsigned int addr, len; -+ -+ /* Check address range */ -+ if (!erase->len) -+ return 0; -+ if ((erase->addr + erase->len) > mtd->size) -+ return -EINVAL; -+ -+ addr = erase->addr; -+ len = erase->len; -+ -+ /* Ensure that requested regions are aligned */ -+ for (i = 0; i < mtd->numeraseregions; i++) { -+ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { -+ if (addr == mtd->eraseregions[i].offset + -+ mtd->eraseregions[i].erasesize * j && -+ len >= mtd->eraseregions[i].erasesize) { -+ ret = sflash->erase(sflash, addr); -+ if (ret < 0) -+ break; -+ ret = sflash_mtd_poll(sflash, addr, 10 * HZ); -+ if (ret) -+ break; -+ addr += mtd->eraseregions[i].erasesize; -+ len -= mtd->eraseregions[i].erasesize; -+ } -+ } -+ if (ret) -+ break; -+ } -+ -+ /* Set erase status */ -+ if (ret) -+ erase->state = MTD_ERASE_FAILED; -+ else -+ erase->state = MTD_ERASE_DONE; -+ -+ /* Call erase callback */ -+ if (erase->callback) -+ erase->callback(erase); -+ -+ return ret; -+} -+ -+static const char *probes[] = { "bcm47xx", NULL }; -+ -+static int bcm47xx_sflash_probe(struct platform_device *pdev) -+{ -+ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev); -+ struct mtd_info *mtd; -+ struct mtd_erase_region_info *regions; -+ int ret = 0; -+ -+ struct mtd_partition *parts; -+ int num_partitions = 0; -+ -+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); -+ if (!mtd) -+ return -ENOMEM; -+ -+ regions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL); -+ if (!mtd) -+ return -ENOMEM; -+ -+ pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n", -+ sflash->blocksize/1024, sflash->numblocks, sflash->size / 1024); -+ -+ /* Setup region info */ -+ regions->offset = 0; -+ regions->erasesize = sflash->blocksize; -+ regions->numblocks = sflash->numblocks; -+ if (regions->erasesize > mtd->erasesize) -+ mtd->erasesize = regions->erasesize; -+ mtd->size = sflash->size; -+ mtd->numeraseregions = 1; -+ -+ /* Register with MTD */ -+ mtd->name = "bcm47xx-sflash"; -+ mtd->type = MTD_NORFLASH; -+ mtd->flags = MTD_CAP_NORFLASH; -+ mtd->eraseregions = regions; -+ mtd->erase = sflash_mtd_erase; -+ mtd->read = sflash_mtd_read; -+ mtd->write = sflash_mtd_write; -+ mtd->writesize = 1; -+ mtd->priv = sflash; -+ mtd->owner = THIS_MODULE; -+ -+ num_partitions = parse_mtd_partitions(mtd, probes, &parts, 0); -+ if (num_partitions < 0) { -+ ret = num_partitions; -+ goto err_destroy; -+ } -+ -+ ret = mtd_device_register(mtd, parts, num_partitions); -+ -+// ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0); -+ -+ if (ret) { -+ pr_err("mtd_device_register failed\n"); -+ return ret; -+ } -+ sflash->mtd = mtd; -+ return 0; -+ -+err_destroy: -+ map_destroy(mtd); -+ return ret; -+} -+ -+static int __devexit bcm47xx_sflash_remove(struct platform_device *pdev) -+{ -+ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev); -+ -+ if (sflash) { -+ mtd_device_unregister(sflash->mtd); -+ map_destroy(sflash->mtd); -+ kfree(sflash->mtd->eraseregions); -+ kfree(sflash->mtd); -+ } -+ return 0; -+} -+ -+static struct platform_driver bcm47xx_sflash_driver = { -+ .remove = __devexit_p(bcm47xx_sflash_remove), -+ .driver = { -+ .name = "bcm47xx_sflash", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init init_bcm47xx_sflash(void) -+{ -+ int ret = platform_driver_probe(&bcm47xx_sflash_driver, bcm47xx_sflash_probe); -+ -+ if (ret) -+ pr_err("error registering platform driver: %i\n", ret); -+ return ret; -+} -+ -+static void __exit exit_bcm47xx_sflash(void) -+{ -+ platform_driver_unregister(&bcm47xx_sflash_driver); -+} -+ -+module_init(init_bcm47xx_sflash); -+module_exit(exit_bcm47xx_sflash); -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("BCM47XX parallel flash driver"); diff --git a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch b/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch deleted file mode 100644 index 9c57a62c36..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 64f3d068654589d6114048ac5933cd4498706cfc Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 15:02:10 +0200 -Subject: [PATCH 20/26] bcm47xx: register flash drivers - - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/setup.c | 72 +++++++++++++++++++++++++++++++++++++++++++++ - 1 files changed, 72 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -30,10 +30,12 @@ - #include - #include - #include -+#include - #include - #include - #include - #include -+#include - #include - - union bcm47xx_bus bcm47xx_bus; -@@ -365,3 +367,73 @@ static int __init bcm47xx_register_bus_c - return 0; - } - device_initcall(bcm47xx_register_bus_complete); -+ -+static struct resource bcm47xx_pflash_resource = { -+ .name = "bcm47xx_pflash", -+ .start = 0, -+ .end = 0, -+ .flags = 0, -+}; -+ -+static struct platform_device bcm47xx_pflash_dev = { -+ .name = "bcm47xx_pflash", -+ .resource = &bcm47xx_pflash_resource, -+ .num_resources = 1, -+}; -+ -+static struct resource bcm47xx_sflash_resource = { -+ .name = "bcm47xx_sflash", -+ .start = 0, -+ .end = 0, -+ .flags = 0, -+}; -+ -+static struct platform_device bcm47xx_sflash_dev = { -+ .name = "bcm47xx_sflash", -+ .resource = &bcm47xx_sflash_resource, -+ .num_resources = 1, -+}; -+ -+static int __init bcm47xx_register_flash(void) -+{ -+#ifdef CONFIG_BCM47XX_SSB -+ struct ssb_chipcommon *chipco; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ struct bcma_drv_cc *drv_cc; -+#endif -+ switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB -+ case BCM47XX_BUS_TYPE_SSB: -+ chipco = &bcm47xx_bus.ssb.chipco; -+ if (chipco->flash_type == SSB_PFLASH) { -+ bcm47xx_pflash_resource.start = chipco->pflash.window; -+ bcm47xx_pflash_resource.end = chipco->pflash.window + chipco->pflash.window_size; -+ return platform_device_register(&bcm47xx_pflash_dev); -+ } else if (chipco->flash_type == SSB_SFLASH) { -+ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash; -+ return platform_device_register(&bcm47xx_sflash_dev); -+ } else { -+ printk(KERN_ERR "No flash device found\n"); -+ return -1; -+ } -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ drv_cc = &bcm47xx_bus.bcma.bus.drv_cc; -+ if (drv_cc->flash_type == BCMA_PFLASH) { -+ bcm47xx_pflash_resource.start = drv_cc->pflash.window; -+ bcm47xx_pflash_resource.end = drv_cc->pflash.window + drv_cc->pflash.window_size; -+ return platform_device_register(&bcm47xx_pflash_dev); -+ } else if (drv_cc->flash_type == BCMA_SFLASH) { -+ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash; -+ return platform_device_register(&bcm47xx_sflash_dev); -+ } else { -+ printk(KERN_ERR "No flash device found\n"); -+ return -1; -+ } -+#endif -+ } -+ return -1; -+} -+fs_initcall(bcm47xx_register_flash); diff --git a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch b/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch deleted file mode 100644 index 2cce8b97b9..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 3e889f1cf928c6d87229761a0bc4c18c775a988b Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Jul 2011 21:13:32 +0200 -Subject: [PATCH 21/26] add workarround for wndr3400 - - -Signed-off-by: Hauke Mehrtens ---- - drivers/mtd/bcm47xxpart.c | 17 ++++++++++++----- - 1 files changed, 12 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -78,11 +78,12 @@ struct trx_header { - - #define NVRAM_SPACE 0x8000 - --#define ROUTER_NETGEAR_WGR614L 1 --#define ROUTER_NETGEAR_WNR834B 2 --#define ROUTER_NETGEAR_WNDR3300 3 --#define ROUTER_NETGEAR_WNR3500L 4 --#define ROUTER_SIMPLETECH_SIMPLESHARE 5 -+#define ROUTER_NETGEAR_WGR614L 1 -+#define ROUTER_NETGEAR_WNR834B 2 -+#define ROUTER_NETGEAR_WNDR3300 3 -+#define ROUTER_NETGEAR_WNR3500L 4 -+#define ROUTER_SIMPLETECH_SIMPLESHARE 5 -+#define ROUTER_NETGEAR_WNDR3400 6 - - static struct mtd_partition bcm47xx_parts[] = { - { name: "cfe", offset:0, size:0, mask_flags:MTD_WRITEABLE, }, -@@ -400,6 +401,11 @@ static int get_router(void) - return ROUTER_NETGEAR_WNR3500L; - } - -+ if (boardnum == 1 && boardtype == 0xb4cf && boardrev == 0x1100) { -+ /* Netgear WNDR3400 */ -+ return ROUTER_NETGEAR_WNDR3400; -+ } -+ - if (boardtype == 0x042f - && boardrev == 0x10 - && boardflags == 0 -@@ -440,6 +446,7 @@ static int parse_bcm47xx_partitions(stru - case ROUTER_NETGEAR_WNR834B: - case ROUTER_NETGEAR_WNDR3300: - case ROUTER_NETGEAR_WNR3500L: -+ case ROUTER_NETGEAR_WNDR3400: - /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum - * is @ 0x007AFFF8 for 8M flash - */ diff --git a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch b/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch deleted file mode 100644 index fee1d0a5a6..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch +++ /dev/null @@ -1,33 +0,0 @@ -From e6730c06cfc827d715f43e9bd276ae939bb86af9 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 22 Jul 2011 17:11:51 +0200 -Subject: [PATCH 23/26] bcma: use randoom mac address as long as reading it out does not work - - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/sprom.c | 5 ++++- - 1 files changed, 4 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - #define SPOFF(offset) ((offset) / sizeof(u16)) - -@@ -214,8 +215,10 @@ int bcma_sprom_get(struct bcma_bus *bus) - if (!bus->drv_cc.core) - return -EOPNOTSUPP; - -- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) { -+ random_ether_addr(bus->sprom.il0mac); - return -ENOENT; -+ } - - sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), - GFP_KERNEL); diff --git a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch b/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch deleted file mode 100644 index d3781b8fe5..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 1d693b2c9d5943cbe938f879041b837cd004737f Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 23 Jul 2011 18:29:38 +0200 -Subject: [PATCH 25/26] bcm47xx: read nvram from sflash - -bcm47xx: add sflash support to nvram - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/nvram.c | 86 +++++++++++++++++++++++++++++++++++++++++++- - 1 files changed, 84 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -20,11 +20,12 @@ - #include - #include - #include -+#include - - static char nvram_buf[NVRAM_SPACE]; - - /* Probe for NVRAM header */ --static void early_nvram_init(void) -+static void early_nvram_init_pflash(void) - { - #ifdef CONFIG_BCM47XX_SSB - struct ssb_chipcommon *ssb_cc; -@@ -86,7 +87,88 @@ found: - for (i = 0; i < sizeof(struct nvram_header); i += 4) - *dst++ = *src++; - for (; i < header->len && i < NVRAM_SPACE; i += 4) -- *dst++ = le32_to_cpu(*src++); -+ *dst++ = *src++; -+} -+ -+static int early_nvram_init_sflash(void) -+{ -+ struct nvram_header header; -+ u32 off; -+ int ret; -+ char *dst; -+ int len; -+ -+ /* check if the struct is already initilized */ -+ if (!bcm47xx_sflash.size) -+ return -1; -+ -+ off = FLASH_MIN; -+ while (off <= bcm47xx_sflash.size) { -+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - NVRAM_SPACE, sizeof(header), (u8 *)&header); -+ if (ret != sizeof(header)) -+ return ret; -+ if (header.magic == NVRAM_HEADER) -+ goto found; -+ off <<= 1; -+ } -+ -+ off = FLASH_MIN; -+ while (off <= bcm47xx_sflash.size) { -+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), sizeof(header), (u8 *)&header); -+ if (ret != sizeof(header)) -+ return ret; -+ if (header.magic == NVRAM_HEADER) -+ goto found; -+ off <<= 1; -+ } -+ return -1; -+ -+found: -+ len = NVRAM_SPACE; -+ dst = nvram_buf; -+ while (len) { -+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), len, dst); -+ if (ret < 0) -+ return ret; -+ off += ret; -+ len -= ret; -+ dst += ret; -+ } -+ return 0; -+} -+ -+static void early_nvram_init(void) -+{ -+ int err = 0; -+ -+ switch (bcm47xx_bus_type) { -+#ifdef CONFIG_BCM47XX_SSB -+ case BCM47XX_BUS_TYPE_SSB: -+ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_PFLASH) { -+ early_nvram_init_pflash(); -+ } else if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH) { -+ err = early_nvram_init_sflash(); -+ if (err < 0) -+ printk(KERN_WARNING "can not read from flash: %i\n", err); -+ } else { -+ printk(KERN_WARNING "unknow flash type\n"); -+ } -+ break; -+#endif -+#ifdef CONFIG_BCM47XX_BCMA -+ case BCM47XX_BUS_TYPE_BCMA: -+ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_PFLASH) { -+ early_nvram_init_pflash(); -+ } else if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH) { -+ err = early_nvram_init_sflash(); -+ if (err < 0) -+ printk(KERN_WARNING "can not read from flash: %i\n", err); -+ } else { -+ printk(KERN_WARNING "unknow flash type\n"); -+ } -+ break; -+#endif -+ } - } - - int nvram_getenv(char *name, char *val, size_t val_len) diff --git a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch b/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch deleted file mode 100644 index 7c8cd79635..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch +++ /dev/null @@ -1,47 +0,0 @@ -From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Thu, 4 Aug 2011 21:09:48 +0200 -Subject: [PATCH 26/26] bcma: export needed gpio functions - - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/driver_chipcommon.c | 5 +++++ - 1 files changed, 5 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -80,16 +80,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_ - { - return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in); - - u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) - { - return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out); - - u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) - { - return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen); - - u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -@@ -101,11 +104,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma - { - return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask); - - u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) - { - return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity); - - #ifdef CONFIG_BCMA_DRIVER_MIPS - void bcma_chipco_serial_init(struct bcma_drv_cc *cc) diff --git a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch deleted file mode 100644 index d74dfcb73e..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 20 Nov 2011 18:22:35 +0100 -Subject: [PATCH 15/21] bcma: scan for extra address space - -Some cores like the USB core have two address spaces. In the USB host -controller one address space is used for the OHCI and the other for the -EHCI controller interface. The USB controller is the only core I found -with two address spaces. This code is based on the AI scan function -ai_scan() in shared/aiutils.c i the Broadcom SDK. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/scan.c | 17 ++++++++++++++++- - include/linux/bcma/bcma.h | 1 + - 2 files changed, 17 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm - return -EILSEQ; - } - -+ -+ /* First Slave Address Descriptor should be port 0: -+ * the main register space for the core -+ */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -+ if (tmp < 0) { -+ /* Try again to see if it is a bridge */ -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0); -+ if (tmp) { -+ printk("found bridge\n"); -+ } -+ -+ } -+ core->addr = tmp; -+ - /* get & parse slave ports */ - for (i = 0; i < ports[1]; i++) { - for (j = 0; ; j++) { -@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm - break; - } else { - if (i == 0 && j == 0) -- core->addr = tmp; -+ core->addr1 = tmp; - } - } - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -138,6 +138,7 @@ struct bcma_device { - u8 core_index; - - u32 addr; -+ u32 addr1; - u32 wrap; - - void __iomem *io_addr; diff --git a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch b/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch deleted file mode 100644 index 2c0462fea3..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch +++ /dev/null @@ -1,115 +0,0 @@ -From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 27 Nov 2011 14:01:01 +0100 -Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?= - =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?= -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This function checks if a reg get set or cleared every 10 microseconds. -It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to -reduce code duplication. In addition it is needed in the USB host -driver. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/core.c | 48 ++++++++++++++++++++++++++++---------------- - include/linux/bcma/bcma.h | 2 + - 2 files changed, 32 insertions(+), 18 deletions(-) - ---- a/drivers/bcma/core.c -+++ b/drivers/bcma/core.c -@@ -51,11 +51,36 @@ int bcma_core_enable(struct bcma_device - } - EXPORT_SYMBOL_GPL(bcma_core_enable); - -+/* Wait for bitmask in a register to get set or cleared. -+ * timeout is in units of ten-microseconds. -+ */ -+int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout, -+ int set) -+{ -+ int i; -+ u32 val; -+ -+ for (i = 0; i < timeout; i++) { -+ val = bcma_read32(dev, reg); -+ if (set) { -+ if ((val & bitmask) == bitmask) -+ return 0; -+ } else { -+ if (!(val & bitmask)) -+ return 0; -+ } -+ udelay(10); -+ } -+ pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n", -+ bitmask, reg, (set ? "set" : "clear")); -+ -+ return -ETIMEDOUT; -+} -+EXPORT_SYMBOL_GPL(bcma_wait_bits); -+ - void bcma_core_set_clockmode(struct bcma_device *core, - enum bcma_clkmode clkmode) - { -- u16 i; -- - WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON && - core->id.id != BCMA_CORE_PCIE && - core->id.id != BCMA_CORE_80211); -@@ -64,15 +89,8 @@ void bcma_core_set_clockmode(struct bcma - case BCMA_CLKMODE_FAST: - bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); - udelay(64); -- for (i = 0; i < 1500; i++) { -- if (bcma_read32(core, BCMA_CLKCTLST) & -- BCMA_CLKCTLST_HAVEHT) { -- i = 0; -- break; -- } -- udelay(10); -- } -- if (i) -+ if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT, -+ 1500, 1)) - pr_err("HT force timeout\n"); - break; - case BCMA_CLKMODE_DYNAMIC: -@@ -84,22 +102,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod - - void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on) - { -- u16 i; -- - WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ); - WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST); - - if (on) { - bcma_set32(core, BCMA_CLKCTLST, req); -- for (i = 0; i < 10000; i++) { -- if ((bcma_read32(core, BCMA_CLKCTLST) & status) == -- status) { -- i = 0; -- break; -- } -- udelay(10); -- } -- if (i) -+ if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1)) - pr_err("PLL enable timeout\n"); - } else { - pr_warn("Disabling PLL not supported yet!\n"); ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct - bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); - } - -+extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, -+ int timeout, int set); -+ - extern bool bcma_core_is_enabled(struct bcma_device *core); - extern void bcma_core_disable(struct bcma_device *core, u32 flags); - extern int bcma_core_enable(struct bcma_device *core, u32 flags); diff --git a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch deleted file mode 100644 index 6f22aa0508..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch +++ /dev/null @@ -1,291 +0,0 @@ -From b39adeae5b06e40699c174ed78ca7c45b8d7976f Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 26 Nov 2011 21:20:54 +0100 -Subject: [PATCH 17/21] USB: OHCI: Add a generic platform device driver - -This adds a generic driver for platform devices. It works like the PCI -driver and is based on it. This is for devices which do not have an own -bus but their OHCI controller works like a PCI controller. It will be -used for the Broadcom bcma and ssb USB OHCI controller. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/host/Kconfig | 10 ++ - drivers/usb/host/ohci-hcd.c | 21 ++++- - drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 227 insertions(+), 1 deletions(-) - create mode 100644 drivers/usb/host/ohci-platform.c - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI - Enable support for the CNS3XXX SOC's on-chip OHCI controller. - It is needed for low-speed USB 1.0 device support. - -+config USB_OHCI_HCD_PLATFORM -+ bool "OHCI driver for a platform device" -+ depends on USB_OHCI_HCD && EXPERIMENTAL -+ default n -+ ---help--- -+ Adds an OHCI host driver for a generic platform device, which -+ provieds a memory space and an irq. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1111,6 +1111,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_ath79_driver - #endif - -+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM -+#include "ohci-platform.c" -+#define PLATFORM_OHCI_DRIVER ohci_platform_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ -@@ -1120,7 +1125,8 @@ MODULE_LICENSE ("GPL"); - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ -- !defined(SSB_OHCI_DRIVER) -+ !defined(SSB_OHCI_DRIVER) && \ -+ !defined(PLATFORM_OHCI_DRIVER) - #error "missing bus glue for ohci-hcd" - #endif - -@@ -1204,9 +1210,19 @@ static int __init ohci_hcd_mod_init(void - goto error_tmio; - #endif - -+#ifdef PLATFORM_OHCI_DRIVER -+ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER); -+ if (retval) -+ goto error_platform; -+#endif -+ - return retval; - - /* Error path */ -+#ifdef PLATFORM_OHCI_DRIVER -+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER); -+ error_platform: -+#endif - #ifdef TMIO_OHCI_DRIVER - platform_driver_unregister(&TMIO_OHCI_DRIVER); - error_tmio: -@@ -1260,6 +1276,9 @@ module_init(ohci_hcd_mod_init); - - static void __exit ohci_hcd_mod_exit(void) - { -+#ifdef PLATFORM_OHCI_DRIVER -+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER); -+#endif - #ifdef TMIO_OHCI_DRIVER - platform_driver_unregister(&TMIO_OHCI_DRIVER); - #endif ---- /dev/null -+++ b/drivers/usb/host/ohci-platform.c -@@ -0,0 +1,197 @@ -+/* -+ * Generic platform ohci driver -+ * -+ * Copyright 2007 Michael Buesch -+ * Copyright 2011 Hauke Mehrtens -+ * -+ * Derived from the OHCI-PCI driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+ -+static int ohci_platform_reset(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int err; -+ -+ ohci_hcd_init(ohci); -+ err = ohci_init(ohci); -+ -+ return err; -+} -+ -+static int ohci_platform_start(struct usb_hcd *hcd) -+{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int err; -+ -+ err = ohci_run(ohci); -+ if (err < 0) { -+ ohci_err(ohci, "can't start\n"); -+ ohci_stop(hcd); -+ } -+ -+ return err; -+} -+ -+static const struct hc_driver ohci_platform_hc_driver = { -+ .description = "platform-usb-ohci", -+ .product_desc = "Generic Platform OHCI Controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_MEMORY | HCD_USB11, -+ -+ .reset = ohci_platform_reset, -+ .start = ohci_platform_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ -+ .get_frame_number = ohci_get_frame, -+ -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+#ifdef CONFIG_PM -+ .bus_suspend = ohci_bus_suspend, -+ .bus_resume = ohci_bus_resume, -+#endif -+ -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int ohci_platform_attach(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res_irq, *res_mem; -+ int err = -ENOMEM; -+ -+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ goto err_return; -+ -+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0); -+ if (!res_irq) { -+ err = -ENXIO; -+ goto err_return; -+ } -+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ if (!res_mem) { -+ err = -ENXIO; -+ goto err_return; -+ } -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) -+ goto err_put_hcd; -+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED); -+ if (err) -+ goto err_iounmap; -+ -+ platform_set_drvdata(dev, hcd); -+ -+ return err; -+ -+err_iounmap: -+ iounmap(hcd->regs); -+err_put_hcd: -+ usb_put_hcd(hcd); -+err_return: -+ return err; -+} -+ -+static int ohci_platform_probe(struct platform_device *dev) -+{ -+ int err; -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ /* We currently always attach BCMA_DEV_USB11_HOSTDEV -+ * as HOST OHCI. If we want to attach it as Client device, -+ * we must branch here and call into the (yet to -+ * be written) Client mode driver. Same for remove(). */ -+ -+ err = ohci_platform_attach(dev); -+ -+ return err; -+} -+ -+static int ohci_platform_remove(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(dev); -+ if (!hcd) -+ return -ENODEV; -+ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ -+ return 0; -+} -+ -+static void ohci_platform_shutdown(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(dev); -+ if (!hcd) -+ return; -+ -+ if (hcd->driver->shutdown) -+ hcd->driver->shutdown(hcd); -+} -+ -+#ifdef CONFIG_PM -+ -+static int ohci_platform_suspend(struct platform_device *dev, -+ pm_message_t state) -+{ -+ -+ return 0; -+} -+ -+static int ohci_platform_resume(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ -+ ohci_finish_controller_resume(hcd); -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ohci_platform_suspend NULL -+#define ohci_platform_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct platform_device_id ohci_platform_table[] = { -+ { "ohci-platform", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(platform, ohci_platform_table); -+ -+static struct platform_driver ohci_platform_driver = { -+ .id_table = ohci_platform_table, -+ .probe = ohci_platform_probe, -+ .remove = ohci_platform_remove, -+ .shutdown = ohci_platform_shutdown, -+ .suspend = ohci_platform_suspend, -+ .resume = ohci_platform_resume, -+ .driver = { -+ .name = "ohci-platform", -+ } -+}; diff --git a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch deleted file mode 100644 index 43cf86a2b1..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch +++ /dev/null @@ -1,265 +0,0 @@ -From aa05e0048cec25719921291e8749674b8cc66fc0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 26 Nov 2011 21:28:56 +0100 -Subject: [PATCH 18/21] USB: EHCI: Add a generic platform device driver - -This adds a generic driver for platform devices. It works like the PCI -driver and is based on it. This is for devices which do not have an own -bus but their EHCI controller works like a PCI controller. It will be -used for the Broadcom bcma and ssb USB EHCI controller. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/host/Kconfig | 10 ++ - drivers/usb/host/ehci-hcd.c | 5 + - drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 226 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/ehci-platform.c - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM - - If unsure, say N. - -+config USB_EHCI_HCD_PLATFORM -+ bool "Generic EHCI driver for a platform device" -+ depends on USB_EHCI_HCD && EXPERIMENTAL -+ default n -+ ---help--- -+ Adds an EHCI host driver for a generic platform device, which -+ provieds a memory space and an irq. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1312,6 +1312,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_grlib_driver - #endif - -+#ifdef CONFIG_USB_EHCI_HCD_PLATFORM -+#include "ehci-platform.c" -+#define PLATFORM_DRIVER ehci_platform_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) ---- /dev/null -+++ b/drivers/usb/host/ehci-platform.c -@@ -0,0 +1,211 @@ -+/* -+ * Generic platform ehci driver -+ * -+ * Copyright 2007 Steven Brown -+ * Copyright 2010-2011 Hauke Mehrtens -+ * -+ * Derived from the ohci-ssb driver -+ * Copyright 2007 Michael Buesch -+ * -+ * Derived from the EHCI-PCI driver -+ * Copyright (c) 2000-2004 by David Brownell -+ * -+ * Derived from the ohci-pci driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+ -+static int ehci_platform_reset(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int retval; -+ -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + -+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ -+ dbg_hcs_params(ehci, "reset"); -+ dbg_hcc_params(ehci, "reset"); -+ -+ /* cache this readonly data; minimize chip reads */ -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ -+ retval = ehci_halt(ehci); -+ if (retval) -+ return retval; -+ -+ /* data structure init */ -+ retval = ehci_init(hcd); -+ if (retval) -+ return retval; -+ -+ ehci_reset(ehci); -+ -+ ehci_port_power(ehci, 1); -+ -+ return retval; -+} -+ -+static const struct hc_driver ehci_platform_hc_driver = { -+ .description = "platform-usb-ehci", -+ .product_desc = "Generic Platform EHCI Controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_platform_reset, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+#if defined(CONFIG_PM) -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+#endif -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+ -+ .update_device = ehci_update_device, -+ -+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -+}; -+ -+static int ehci_platform_attach(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res_irq, *res_mem; -+ int err = -ENOMEM; -+ -+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ goto err_return; -+ -+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0); -+ if (!res_irq) { -+ err = -ENXIO; -+ goto err_return; -+ } -+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ if (!res_mem) { -+ err = -ENXIO; -+ goto err_return; -+ } -+ hcd->rsrc_start = res_mem->start; -+ hcd->rsrc_len = res_mem->end - res_mem->start + 1; -+ -+ /* -+ * start & size modified per sbutils.c -+ */ -+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) -+ goto err_put_hcd; -+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED); -+ if (err) -+ goto err_iounmap; -+ -+ platform_set_drvdata(dev, hcd); -+ -+ return err; -+ -+err_iounmap: -+ iounmap(hcd->regs); -+err_put_hcd: -+ usb_put_hcd(hcd); -+err_return: -+ return err; -+} -+ -+static int ehci_platform_probe(struct platform_device *dev) -+{ -+ int err; -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ err = ehci_platform_attach(dev); -+ -+ return err; -+} -+ -+static int ehci_platform_remove(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(dev); -+ if (!hcd) -+ return -ENODEV; -+ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ -+ return 0; -+} -+ -+static void ehci_platform_shutdown(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd; -+ -+ hcd = platform_get_drvdata(dev); -+ if (!hcd) -+ return; -+ -+ if (hcd->driver->shutdown) -+ hcd->driver->shutdown(hcd); -+} -+ -+#ifdef CONFIG_PM -+ -+static int ehci_platform_suspend(struct platform_device *dev, -+ pm_message_t state) -+{ -+ return 0; -+} -+ -+static int ehci_platform_resume(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ -+ ehci_finish_controller_resume(hcd); -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ehci_platform_suspend NULL -+#define ehci_platform_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct platform_device_id ehci_platform_table[] = { -+ { "ehci-platform", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(platform, ehci_platform_table); -+ -+static struct platform_driver ehci_platform_driver = { -+ .id_table = ehci_platform_table, -+ .probe = ehci_platform_probe, -+ .remove = ehci_platform_remove, -+ .shutdown = ehci_platform_shutdown, -+ .suspend = ehci_platform_suspend, -+ .resume = ehci_platform_resume, -+ .driver = { -+ .name = "ehci-platform", -+ } -+}; diff --git a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch deleted file mode 100644 index e2a2f1e474..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch +++ /dev/null @@ -1,358 +0,0 @@ -From 4ea647c5a257d57eaf230f783e54b2c0232852b8 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 26 Nov 2011 21:33:41 +0100 -Subject: [PATCH 19/26] USB: Add driver for the bcma bus - -This adds a USB driver using the generic platform device driver for the -USB controller found on the Broadcom bcma bus. The bcma bus just -exposes one device which serves the OHCI and the EHCI controller at the -same time. This driver probes for this USB controller and creates and -registers two new platform devices which will be probed by the new -generic platform device driver. This makes it possible to use the EHCI -and the OCHI controller on the bcma bus at the same time. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/host/Kconfig | 12 ++ - drivers/usb/host/Makefile | 1 + - drivers/usb/host/bcma-hcd.c | 309 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 322 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/bcma-hcd.c - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -598,3 +598,15 @@ config USB_OCTEON_OHCI - config USB_OCTEON2_COMMON - bool - default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI -+ -+config USB_HCD_BCMA -+ tristate "BCMA usb host driver" -+ depends on BCMA && EXPERIMENTAL -+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD -+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD -+ help -+ Enbale support for the EHCI and OCHI host controller on an bcma bus. -+ It converts the bcma driver into two platform device drivers -+ for ehci and ohci. -+ -+ If unsure, say N. ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -35,3 +35,4 @@ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o - obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o - obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o - obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o -+obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o ---- /dev/null -+++ b/drivers/usb/host/bcma-hcd.c -@@ -0,0 +1,309 @@ -+/* -+ * Broadcom specific Advanced Microcontroller Bus -+ * Broadcom USB-core driver (BCMA bus glue) -+ * -+ * Copyright 2011 Hauke Mehrtens -+ * -+ * Based on ssb-ohci driver -+ * Copyright 2007 Michael Buesch -+ * -+ * Derived from the OHCI-PCI driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Derived from the USBcore related parts of Broadcom-SB -+ * Copyright 2005-2011 Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+#include -+#include -+#include -+ -+MODULE_AUTHOR("Hauke Mehrtens"); -+MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); -+MODULE_LICENSE("GPL"); -+ -+struct bcma_hcd_device { -+ struct platform_device *ehci_dev; -+ struct platform_device *ohci_dev; -+}; -+ -+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) -+{ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+ /* Work around for 4716 failures. */ -+ if (dev->bus->chipinfo.id == 0x4716) { -+ u32 tmp; -+ -+ tmp = bcma_cpu_clock(&dev->bus->drv_mips); -+ if (tmp >= 480000000) -+ tmp = 0x1846b; /* set CDR to 0x11(fast) */ -+ else if (tmp == 453000000) -+ tmp = 0x1046b; /* set CDR to 0x10(slow) */ -+ else -+ tmp = 0; -+ -+ /* Change Shim mdio control reg to fix host not acking at -+ * high frequencies -+ */ -+ if (tmp) { -+ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ -+ udelay(500); -+ -+ bcma_write32(dev, 0x524, tmp); -+ udelay(500); -+ bcma_write32(dev, 0x524, 0x4ab); -+ udelay(500); -+ bcma_read32(dev, 0x528); -+ bcma_write32(dev, 0x528, 0x80000000); -+ } -+ } -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ -+} -+ -+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ -+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) -+{ -+ u32 tmp; -+ -+ /* -+ * USB 2.0 special considerations: -+ * -+ * 1. Since the core supports both OHCI and EHCI functions, it must -+ * only be reset once. -+ * -+ * 2. In addition to the standard SI reset sequence, the Host Control -+ * Register must be programmed to bring the USB core and various -+ * phy components out of reset. -+ */ -+ if (!bcma_core_is_enabled(dev)) { -+ bcma_core_enable(dev, 0); -+ mdelay(10); -+ if (dev->id.rev >= 5) { -+ /* Enable Misc PLL */ -+ tmp = bcma_read32(dev, 0x1e0); -+ tmp |= 0x100; -+ bcma_write32(dev, 0x1e0, tmp); -+ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 1)) -+ printk(KERN_EMERG "Failed to enable misc PPL!\n"); -+ -+ /* Take out of resets */ -+ bcma_write32(dev, 0x200, 0x4ff); -+ udelay(25); -+ bcma_write32(dev, 0x200, 0x6ff); -+ udelay(25); -+ -+ /* Make sure digital and AFE are locked in USB PHY */ -+ bcma_write32(dev, 0x524, 0x6b); -+ udelay(50); -+ tmp = bcma_read32(dev, 0x524); -+ udelay(50); -+ bcma_write32(dev, 0x524, 0xab); -+ udelay(50); -+ tmp = bcma_read32(dev, 0x524); -+ udelay(50); -+ bcma_write32(dev, 0x524, 0x2b); -+ udelay(50); -+ tmp = bcma_read32(dev, 0x524); -+ udelay(50); -+ bcma_write32(dev, 0x524, 0x10ab); -+ udelay(50); -+ tmp = bcma_read32(dev, 0x524); -+ -+ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1)) { -+ tmp = bcma_read32(dev, 0x528); -+ printk(KERN_EMERG -+ "USB20H mdio_rddata 0x%08x\n", tmp); -+ } -+ bcma_write32(dev, 0x528, 0x80000000); -+ tmp = bcma_read32(dev, 0x314); -+ udelay(265); -+ bcma_write32(dev, 0x200, 0x7ff); -+ udelay(10); -+ -+ /* Take USB and HSIC out of non-driving modes */ -+ bcma_write32(dev, 0x510, 0); -+ } else { -+ bcma_write32(dev, 0x200, 0x7ff); -+ -+ udelay(1); -+ } -+ -+ bcma_hcd_4716wa(dev); -+ } -+} -+ -+static struct platform_device * __devinit -+bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr) -+{ -+ struct platform_device *hci_dev; -+ struct resource hci_res[2]; -+ int ret = -ENOMEM; -+ -+ memset(hci_res, 0, sizeof(hci_res)); -+ -+ hci_res[0].start = addr; -+ hci_res[0].end = hci_res[0].start + 0x1000 - 1; -+ hci_res[0].flags = IORESOURCE_MEM; -+ -+ hci_res[1].start = dev->irq; -+ hci_res[1].flags = IORESOURCE_IRQ; -+ -+ hci_dev = platform_device_alloc(name, 0); -+ if (!hci_dev) -+ goto err_alloc; -+ -+ hci_dev->dev.parent = &dev->dev; -+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; -+ -+ ret = platform_device_add_resources(hci_dev, hci_res, -+ ARRAY_SIZE(hci_res)); -+ if (ret) -+ goto err_alloc; -+ -+ ret = platform_device_add(hci_dev); -+ if (ret) { -+err_alloc: -+ platform_device_put(hci_dev); -+ return ERR_PTR(ret); -+ } -+ -+ return hci_dev; -+} -+ -+static int __devinit bcma_hcd_probe(struct bcma_device *dev) -+{ -+ int err; -+ u16 chipid_top; -+ u32 ohci_addr; -+ struct bcma_hcd_device *usb_dev; -+ struct bcma_chipinfo *chipinfo; -+ -+ chipinfo = &dev->bus->chipinfo; -+ /* USBcores are only connected on embedded devices. */ -+ chipid_top = (chipinfo->id & 0xFF00); -+ if (chipid_top != 0x4700 && chipid_top != 0x5300) -+ return -ENODEV; -+ -+ /* TODO: Probably need checks here; is the core connected? */ -+ -+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || -+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) -+ return -EOPNOTSUPP; -+ -+ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); -+ if (!usb_dev) -+ return -ENOMEM; -+ -+ bcma_hcd_init_chip(dev); -+ -+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */ -+ ohci_addr = dev->addr1; -+ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) -+ && chipinfo->rev == 0) -+ ohci_addr = 0x18009000; -+ -+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform", -+ ohci_addr); -+ if (IS_ERR(usb_dev->ohci_dev)) { -+ err = PTR_ERR(usb_dev->ohci_dev); -+ goto err_free_usb_dev; -+ } -+ -+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform", -+ dev->addr); -+ if (IS_ERR(usb_dev->ehci_dev)) { -+ err = PTR_ERR(usb_dev->ehci_dev); -+ goto err_unregister_ohci_dev; -+ } -+ -+ bcma_set_drvdata(dev, usb_dev); -+ return 0; -+ -+err_unregister_ohci_dev: -+ platform_device_unregister(usb_dev->ohci_dev); -+err_free_usb_dev: -+ kfree(usb_dev); -+ return err; -+} -+ -+static void __devexit bcma_hcd_remove(struct bcma_device *dev) -+{ -+ struct bcma_hcd_device *usb_dev; -+ struct platform_device *ohci_dev; -+ struct platform_device *ehci_dev; -+ -+ usb_dev = bcma_get_drvdata(dev); -+ if (!usb_dev) -+ return; -+ -+ ohci_dev = usb_dev->ohci_dev; -+ ehci_dev = usb_dev->ehci_dev; -+ -+ if (ohci_dev) { -+ platform_device_unregister(ohci_dev); -+ } -+ if (ehci_dev) { -+ platform_device_unregister(ehci_dev); -+ } -+ -+ bcma_core_disable(dev, 0); -+} -+ -+static void bcma_hcd_shutdown(struct bcma_device *dev) -+{ -+ bcma_core_disable(dev, 0); -+} -+ -+#ifdef CONFIG_PM -+ -+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state) -+{ -+ bcma_core_disable(dev, 0); -+ -+ return 0; -+} -+ -+static int bcma_hcd_resume(struct bcma_device *dev) -+{ -+ bcma_core_enable(dev, 0); -+ -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define bcma_hcd_suspend NULL -+#define bcma_hcd_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORETABLE_END -+}; -+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); -+ -+static struct bcma_driver bcma_hcd_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = bcma_hcd_table, -+ .probe = bcma_hcd_probe, -+ .remove = __devexit_p(bcma_hcd_remove), -+ .shutdown = bcma_hcd_shutdown, -+ .suspend = bcma_hcd_suspend, -+ .resume = bcma_hcd_resume, -+}; -+ -+static int __init bcma_hcd_init(void) -+{ -+ return bcma_driver_register(&bcma_hcd_driver); -+} -+module_init(bcma_hcd_init); -+ -+static void __exit bcma_hcd_exit(void) -+{ -+ bcma_driver_unregister(&bcma_hcd_driver); -+} -+module_exit(bcma_hcd_exit); diff --git a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch b/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch deleted file mode 100644 index 91b6c9cbca..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch +++ /dev/null @@ -1,325 +0,0 @@ -From 0f91c21de577d2d9f1fd164ca686d9a4ff0e2c8b Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 26 Nov 2011 21:35:17 +0100 -Subject: [PATCH 20/26] USB: Add driver for the ssb bus - -This adds a USB driver using the generic platform device driver for the -USB controller found on the Broadcom ssb bus. The ssb bus just -exposes one device which serves the OHCI and the EHCI controller at the -same time. This driver probes for this USB controller and creates and -registers two new platform devices which will be probed by the new -generic platform device driver. This makes it possible to use the EHCI -and the OCHI controller on the ssb bus at the same time. - -The old ssb OHCI USB driver will be removed in the next step as this -driver also provide an OHCI driver and an EHCI for the cores supporting -it. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/host/Kconfig | 12 ++ - drivers/usb/host/Makefile | 1 + - drivers/usb/host/ssb-hcd.c | 272 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 285 insertions(+), 0 deletions(-) - create mode 100644 drivers/usb/host/ssb-hcd.c - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -610,3 +610,15 @@ config USB_HCD_BCMA - for ehci and ohci. - - If unsure, say N. -+ -+config USB_HCD_SSB -+ tristate "SSB usb host driver" -+ depends on SSB && EXPERIMENTAL -+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD -+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD -+ help -+ Enbale support for the EHCI and OCHI host controller on an bcma bus. -+ It converts the bcma driver into two platform device drivers -+ for ehci and ohci. -+ -+ If unsure, say N. ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd - obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o - obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o - obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o -+obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o ---- /dev/null -+++ b/drivers/usb/host/ssb-hcd.c -@@ -0,0 +1,272 @@ -+/* -+ * Sonics Silicon Backplane -+ * Broadcom USB-core driver (SSB bus glue) -+ * -+ * Copyright 2011 Hauke Mehrtens -+ * -+ * Based on ssb-ohci driver -+ * Copyright 2007 Michael Buesch -+ * -+ * Derived from the OHCI-PCI driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Derived from the USBcore related parts of Broadcom-SB -+ * Copyright 2005-2011 Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+#include -+#include -+#include -+ -+MODULE_AUTHOR("Hauke Mehrtens"); -+MODULE_DESCRIPTION("Common USB driver for SSB Bus"); -+MODULE_LICENSE("GPL"); -+ -+#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29) -+ -+struct ssb_hcd_device { -+ struct platform_device *ehci_dev; -+ struct platform_device *ohci_dev; -+ -+ u32 enable_flags; -+}; -+ -+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev) -+{ -+#ifdef CONFIG_SSB_DRIVER_MIPS -+ /* Work around for 5354 failures */ -+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { -+ /* Change syn01 reg */ -+ ssb_write32(dev, 0x894, 0x00fe00fe); -+ -+ /* Change syn03 reg */ -+ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1); -+ } -+#endif -+} -+ -+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev) -+{ -+ if (dev->id.coreid == SSB_DEV_USB20_HOST) { -+ /* -+ * USB 2.0 special considerations: -+ * -+ * In addition to the standard SSB reset sequence, the Host -+ * Control Register must be programmed to bring the USB core -+ * and various phy components out of reset. -+ */ -+ ssb_write32(dev, 0x200, 0x7ff); -+ -+ /* Change Flush control reg */ -+ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8); -+ ssb_read32(dev, 0x400); -+ -+ /* Change Shim control reg */ -+ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100); -+ ssb_read32(dev, 0x304); -+ -+ udelay(1); -+ -+ ssb_hcd_5354wa(dev); -+ } -+} -+ -+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ -+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev) -+{ -+ u32 flags = 0; -+ -+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) -+ /* Put the device into host-mode. */ -+ flags |= SSB_HCD_TMSLOW_HOSTMODE; -+ -+ ssb_device_enable(dev, flags); -+ -+ ssb_hcd_usb20wa(dev); -+ -+ return flags; -+} -+ -+static struct platform_device * __devinit -+ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len) -+{ -+ struct platform_device *hci_dev; -+ struct resource hci_res[2]; -+ int ret = -ENOMEM; -+ -+ memset(hci_res, 0, sizeof(hci_res)); -+ -+ hci_res[0].start = addr; -+ hci_res[0].end = hci_res[0].start + len - 1; -+ hci_res[0].flags = IORESOURCE_MEM; -+ -+ hci_res[1].start = dev->irq; -+ hci_res[1].flags = IORESOURCE_IRQ; -+ -+ hci_dev = platform_device_alloc(name, 0); -+ if (!hci_dev) -+ goto err_alloc; -+ -+ hci_dev->dev.parent = dev->dev; -+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; -+ -+ ret = platform_device_add_resources(hci_dev, hci_res, 2); -+ if (ret) -+ goto err_alloc; -+ -+ ret = platform_device_add(hci_dev); -+ if (ret) { -+err_alloc: -+ platform_device_put(hci_dev); -+ return ERR_PTR(ret); -+ } -+ -+ return hci_dev; -+} -+ -+static int __devinit ssb_hcd_probe(struct ssb_device *dev, -+ const struct ssb_device_id *id) -+{ -+ int err, tmp; -+ int start, len; -+ u16 chipid_top; -+ struct ssb_hcd_device *usb_dev; -+ -+ /* USBcores are only connected on embedded devices. */ -+ chipid_top = (dev->bus->chip_id & 0xFF00); -+ if (chipid_top != 0x4700 && chipid_top != 0x5300) -+ return -ENODEV; -+ -+ /* TODO: Probably need checks here; is the core connected? */ -+ -+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || -+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) -+ return -EOPNOTSUPP; -+ -+ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); -+ if (!usb_dev) -+ return -ENOMEM; -+ -+ /* We currently always attach SSB_DEV_USB11_HOSTDEV -+ * as HOST OHCI. If we want to attach it as Client device, -+ * we must branch here and call into the (yet to -+ * be written) Client mode driver. Same for remove(). */ -+ usb_dev->enable_flags = ssb_hcd_init_chip(dev); -+ -+ tmp = ssb_read32(dev, SSB_ADMATCH0); -+ -+ start = ssb_admatch_base(tmp); -+ len = ssb_admatch_size(tmp); -+ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start, -+ len); -+ if (IS_ERR(usb_dev->ohci_dev)) { -+ err = PTR_ERR(usb_dev->ohci_dev); -+ goto err_free_usb_dev; -+ } -+ -+ if (dev->id.coreid == SSB_DEV_USB20_HOST) { -+ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ -+ len = 0x100; /* ehci reg block size */ -+ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform", -+ start, len); -+ if (IS_ERR(usb_dev->ehci_dev)) { -+ err = PTR_ERR(usb_dev->ehci_dev); -+ goto err_unregister_ohci_dev; -+ } -+ } -+ -+ ssb_set_drvdata(dev, usb_dev); -+ return 0; -+ -+err_unregister_ohci_dev: -+ platform_device_unregister(usb_dev->ohci_dev); -+err_free_usb_dev: -+ kfree(usb_dev); -+ return err; -+} -+ -+static void __devexit ssb_hcd_remove(struct ssb_device *dev) -+{ -+ struct ssb_hcd_device *usb_dev; -+ struct platform_device *ohci_dev; -+ struct platform_device *ehci_dev; -+ -+ usb_dev = ssb_get_drvdata(dev); -+ if (!usb_dev) -+ return; -+ -+ ohci_dev = usb_dev->ohci_dev; -+ ehci_dev = usb_dev->ehci_dev; -+ -+ if (ohci_dev) { -+ platform_device_unregister(ohci_dev); -+ } -+ if (ehci_dev) { -+ platform_device_unregister(ehci_dev); -+ } -+ -+ ssb_device_disable(dev, 0); -+} -+ -+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev) -+{ -+ ssb_device_disable(dev, 0); -+} -+ -+#ifdef CONFIG_PM -+ -+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state) -+{ -+ ssb_device_disable(dev, 0); -+ -+ return 0; -+} -+ -+static int ssb_hcd_resume(struct ssb_device *dev) -+{ -+ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); -+ -+ ssb_device_enable(dev, usb_dev->enable_flags); -+ -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ssb_hcd_suspend NULL -+#define ssb_hcd_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), -+ SSB_DEVTABLE_END -+}; -+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table); -+ -+static struct ssb_driver ssb_hcd_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = ssb_hcd_table, -+ .probe = ssb_hcd_probe, -+ .remove = __devexit_p(ssb_hcd_remove), -+ .shutdown = ssb_hcd_shutdown, -+ .suspend = ssb_hcd_suspend, -+ .resume = ssb_hcd_resume, -+}; -+ -+static int __init ssb_hcd_init(void) -+{ -+ return ssb_driver_register(&ssb_hcd_driver); -+} -+module_init(ssb_hcd_init); -+ -+static void __exit ssb_hcd_exit(void) -+{ -+ ssb_driver_unregister(&ssb_hcd_driver); -+} -+module_exit(ssb_hcd_exit); diff --git a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch b/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch deleted file mode 100644 index 140088c6d5..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch +++ /dev/null @@ -1,357 +0,0 @@ -From 8483de69568d1da9c106683d35d2b79c729b56c2 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 26 Nov 2011 21:36:50 +0100 -Subject: [PATCH 21/21] USB: OHCI: remove old SSB OHCI driver - -This is now replaced by the new ssb USB driver, which also supports -devices with an EHCI controller. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/host/Kconfig | 13 -- - drivers/usb/host/ohci-hcd.c | 19 --- - drivers/usb/host/ohci-ssb.c | 260 ------------------------------------------- - 3 files changed, 0 insertions(+), 292 deletions(-) - delete mode 100644 drivers/usb/host/ohci-ssb.c - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI - Enables support for PCI-bus plug-in USB controller cards. - If unsure, say Y. - --config USB_OHCI_HCD_SSB -- bool "OHCI support for Broadcom SSB OHCI core" -- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL -- default n -- ---help--- -- Support for the Sonics Silicon Backplane (SSB) attached -- Broadcom USB OHCI core. -- -- This device is present in some embedded devices with -- Broadcom based SSB bus. -- -- If unsure, say N. -- - config USB_OHCI_SH - bool "OHCI support for SuperH USB controller" - depends on USB_OHCI_HCD && SUPERH ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL"); - #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver - #endif - --#ifdef CONFIG_USB_OHCI_HCD_SSB --#include "ohci-ssb.c" --#define SSB_OHCI_DRIVER ssb_ohci_driver --#endif -- - #ifdef CONFIG_MFD_SM501 - #include "ohci-sm501.c" - #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver -@@ -1125,7 +1120,6 @@ MODULE_LICENSE ("GPL"); - !defined(PS3_SYSTEM_BUS_DRIVER) && \ - !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ -- !defined(SSB_OHCI_DRIVER) && \ - !defined(PLATFORM_OHCI_DRIVER) - #error "missing bus glue for ohci-hcd" - #endif -@@ -1192,12 +1186,6 @@ static int __init ohci_hcd_mod_init(void - goto error_pci; - #endif - --#ifdef SSB_OHCI_DRIVER -- retval = ssb_driver_register(&SSB_OHCI_DRIVER); -- if (retval) -- goto error_ssb; --#endif -- - #ifdef SM501_OHCI_DRIVER - retval = platform_driver_register(&SM501_OHCI_DRIVER); - if (retval < 0) -@@ -1231,10 +1219,6 @@ static int __init ohci_hcd_mod_init(void - platform_driver_unregister(&SM501_OHCI_DRIVER); - error_sm501: - #endif --#ifdef SSB_OHCI_DRIVER -- ssb_driver_unregister(&SSB_OHCI_DRIVER); -- error_ssb: --#endif - #ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); - error_pci: -@@ -1285,9 +1269,6 @@ static void __exit ohci_hcd_mod_exit(voi - #ifdef SM501_OHCI_DRIVER - platform_driver_unregister(&SM501_OHCI_DRIVER); - #endif --#ifdef SSB_OHCI_DRIVER -- ssb_driver_unregister(&SSB_OHCI_DRIVER); --#endif - #ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); - #endif ---- a/drivers/usb/host/ohci-ssb.c -+++ /dev/null -@@ -1,260 +0,0 @@ --/* -- * Sonics Silicon Backplane -- * Broadcom USB-core OHCI driver -- * -- * Copyright 2007 Michael Buesch -- * -- * Derived from the OHCI-PCI driver -- * Copyright 1999 Roman Weissgaerber -- * Copyright 2000-2002 David Brownell -- * Copyright 1999 Linus Torvalds -- * Copyright 1999 Gregory P. Smith -- * -- * Derived from the USBcore related parts of Broadcom-SB -- * Copyright 2005 Broadcom Corporation -- * -- * Licensed under the GNU/GPL. See COPYING for details. -- */ --#include -- -- --#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) -- --struct ssb_ohci_device { -- struct ohci_hcd ohci; /* _must_ be at the beginning. */ -- -- u32 enable_flags; --}; -- --static inline --struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) --{ -- return (struct ssb_ohci_device *)(hcd->hcd_priv); --} -- -- --static int ssb_ohci_reset(struct usb_hcd *hcd) --{ -- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -- struct ohci_hcd *ohci = &ohcidev->ohci; -- int err; -- -- ohci_hcd_init(ohci); -- err = ohci_init(ohci); -- -- return err; --} -- --static int ssb_ohci_start(struct usb_hcd *hcd) --{ -- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -- struct ohci_hcd *ohci = &ohcidev->ohci; -- int err; -- -- err = ohci_run(ohci); -- if (err < 0) { -- ohci_err(ohci, "can't start\n"); -- ohci_stop(hcd); -- } -- -- return err; --} -- --static const struct hc_driver ssb_ohci_hc_driver = { -- .description = "ssb-usb-ohci", -- .product_desc = "SSB OHCI Controller", -- .hcd_priv_size = sizeof(struct ssb_ohci_device), -- -- .irq = ohci_irq, -- .flags = HCD_MEMORY | HCD_USB11, -- -- .reset = ssb_ohci_reset, -- .start = ssb_ohci_start, -- .stop = ohci_stop, -- .shutdown = ohci_shutdown, -- -- .urb_enqueue = ohci_urb_enqueue, -- .urb_dequeue = ohci_urb_dequeue, -- .endpoint_disable = ohci_endpoint_disable, -- -- .get_frame_number = ohci_get_frame, -- -- .hub_status_data = ohci_hub_status_data, -- .hub_control = ohci_hub_control, --#ifdef CONFIG_PM -- .bus_suspend = ohci_bus_suspend, -- .bus_resume = ohci_bus_resume, --#endif -- -- .start_port_reset = ohci_start_port_reset, --}; -- --static void ssb_ohci_detach(struct ssb_device *dev) --{ -- struct usb_hcd *hcd = ssb_get_drvdata(dev); -- -- if (hcd->driver->shutdown) -- hcd->driver->shutdown(hcd); -- usb_remove_hcd(hcd); -- iounmap(hcd->regs); -- release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -- usb_put_hcd(hcd); -- ssb_device_disable(dev, 0); --} -- --static int ssb_ohci_attach(struct ssb_device *dev) --{ -- struct ssb_ohci_device *ohcidev; -- struct usb_hcd *hcd; -- int err = -ENOMEM; -- u32 tmp, flags = 0; -- -- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || -- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) -- return -EOPNOTSUPP; -- -- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { -- /* Put the device into host-mode. */ -- flags |= SSB_OHCI_TMSLOW_HOSTMODE; -- ssb_device_enable(dev, flags); -- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { -- /* -- * USB 2.0 special considerations: -- * -- * In addition to the standard SSB reset sequence, the Host -- * Control Register must be programmed to bring the USB core -- * and various phy components out of reset. -- */ -- ssb_device_enable(dev, 0); -- ssb_write32(dev, 0x200, 0x7ff); -- -- /* Change Flush control reg */ -- tmp = ssb_read32(dev, 0x400); -- tmp &= ~8; -- ssb_write32(dev, 0x400, tmp); -- tmp = ssb_read32(dev, 0x400); -- -- /* Change Shim control reg */ -- tmp = ssb_read32(dev, 0x304); -- tmp &= ~0x100; -- ssb_write32(dev, 0x304, tmp); -- tmp = ssb_read32(dev, 0x304); -- -- udelay(1); -- -- /* Work around for 5354 failures */ -- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { -- /* Change syn01 reg */ -- tmp = 0x00fe00fe; -- ssb_write32(dev, 0x894, tmp); -- -- /* Change syn03 reg */ -- tmp = ssb_read32(dev, 0x89c); -- tmp |= 0x1; -- ssb_write32(dev, 0x89c, tmp); -- } -- } else -- ssb_device_enable(dev, 0); -- -- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, -- dev_name(dev->dev)); -- if (!hcd) -- goto err_dev_disable; -- ohcidev = hcd_to_ssb_ohci(hcd); -- ohcidev->enable_flags = flags; -- -- tmp = ssb_read32(dev, SSB_ADMATCH0); -- hcd->rsrc_start = ssb_admatch_base(tmp); -- hcd->rsrc_len = ssb_admatch_size(tmp); -- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -- if (!hcd->regs) -- goto err_put_hcd; -- err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); -- if (err) -- goto err_iounmap; -- -- ssb_set_drvdata(dev, hcd); -- -- return err; -- --err_iounmap: -- iounmap(hcd->regs); --err_put_hcd: -- usb_put_hcd(hcd); --err_dev_disable: -- ssb_device_disable(dev, flags); -- return err; --} -- --static int ssb_ohci_probe(struct ssb_device *dev, -- const struct ssb_device_id *id) --{ -- int err; -- u16 chipid_top; -- -- /* USBcores are only connected on embedded devices. */ -- chipid_top = (dev->bus->chip_id & 0xFF00); -- if (chipid_top != 0x4700 && chipid_top != 0x5300) -- return -ENODEV; -- -- /* TODO: Probably need checks here; is the core connected? */ -- -- if (usb_disabled()) -- return -ENODEV; -- -- /* We currently always attach SSB_DEV_USB11_HOSTDEV -- * as HOST OHCI. If we want to attach it as Client device, -- * we must branch here and call into the (yet to -- * be written) Client mode driver. Same for remove(). */ -- -- err = ssb_ohci_attach(dev); -- -- return err; --} -- --static void ssb_ohci_remove(struct ssb_device *dev) --{ -- ssb_ohci_detach(dev); --} -- --#ifdef CONFIG_PM -- --static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) --{ -- ssb_device_disable(dev, 0); -- -- return 0; --} -- --static int ssb_ohci_resume(struct ssb_device *dev) --{ -- struct usb_hcd *hcd = ssb_get_drvdata(dev); -- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -- -- ssb_device_enable(dev, ohcidev->enable_flags); -- -- ohci_finish_controller_resume(hcd); -- return 0; --} -- --#else /* !CONFIG_PM */ --#define ssb_ohci_suspend NULL --#define ssb_ohci_resume NULL --#endif /* CONFIG_PM */ -- --static const struct ssb_device_id ssb_ohci_table[] = { -- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), -- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), -- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), -- SSB_DEVTABLE_END --}; --MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); -- --static struct ssb_driver ssb_ohci_driver = { -- .name = KBUILD_MODNAME, -- .id_table = ssb_ohci_table, -- .probe = ssb_ohci_probe, -- .remove = ssb_ohci_remove, -- .suspend = ssb_ohci_suspend, -- .resume = ssb_ohci_resume, --}; diff --git a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch b/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch deleted file mode 100644 index 0a329c00a3..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 7b90e7040b9783b91a4e2baf72ac32d3a00f9f2d Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 21 Jan 2012 11:18:25 +0100 -Subject: [PATCH 31/34] ssb: fix cardbus in hostmode - - -Signed-off-by: Hauke Mehrtens ---- - drivers/ssb/driver_pcicore.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ - u32 tmp; - - /* We do only have one cardbus device behind the bridge. */ -- if (pc->cardbusmode && (dev >= 1)) -+ if (pc->cardbusmode && (dev > 1)) - goto out; - - if (bus == 0) { diff --git a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch deleted file mode 100644 index 0951644412..0000000000 --- a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 18 Jul 2010 14:59:24 +0200 -Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early - -Swap the first and second serial if console=ttyS1 was set. -Set it up and register it for early serial support. - -This patch has been in OpenWRT for a long time. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++- - 1 files changed, 38 insertions(+), 1 deletions(-) - ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -31,6 +31,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -278,6 +280,31 @@ static int bcm47xx_get_invariants(struct - return 0; - } - -+#ifdef CONFIG_SERIAL_8250 -+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore) -+{ -+ int i; -+ -+ for (i = 0; i < mcore->nr_serial_ports; i++) { -+ struct ssb_serial_port *port = &(mcore->serial_ports[i]); -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ s.line = i; -+ s.mapbase = (unsigned int) port->regs; -+ s.membase = port->regs; -+ s.irq = port->irq + 2; -+ s.uartclk = port->baud_base; -+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = port->reg_shift; -+ -+ early_serial_setup(&s); -+ } -+ printk(KERN_DEBUG "Serial init done.\n"); -+} -+#endif -+ - static void __init bcm47xx_register_ssb(void) - { - int err; -@@ -310,6 +337,10 @@ static void __init bcm47xx_register_ssb( - memcpy(&mcore->serial_ports[1], &port, sizeof(port)); - } - } -+ -+#ifdef CONFIG_SERIAL_8250 -+ bcm47xx_early_serial_setup(mcore); -+#endif - } - #endif - diff --git a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch deleted file mode 100644 index 69d4eefa85..0000000000 --- a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch +++ /dev/null @@ -1,141 +0,0 @@ -From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 18 Jul 2010 15:11:26 +0200 -Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console - -Do not use the CFE console. It causes hangs on some devices like the -Buffalo WHR-HP-G54. -This was reported in https://dev.openwrt.org/ticket/4061 and -https://forum.openwrt.org/viewtopic.php?id=17063 - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/Kconfig | 1 - - arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------ - 2 files changed, 6 insertions(+), 77 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -94,7 +94,6 @@ config BCM47XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_GPIO -- select SYS_HAS_EARLY_PRINTK - select CFE - help - Support for BCM47XX based boards ---- a/arch/mips/bcm47xx/prom.c -+++ b/arch/mips/bcm47xx/prom.c -@@ -31,96 +31,28 @@ - #include - #include - --static int cfe_cons_handle; -- - const char *get_system_type(void) - { - return "Broadcom BCM47XX"; - } - --void prom_putchar(char c) --{ -- while (cfe_write(cfe_cons_handle, &c, 1) == 0) -- ; --} -- --static __init void prom_init_cfe(void) -+static __init int prom_init_cfe(void) - { - uint32_t cfe_ept; - uint32_t cfe_handle; - uint32_t cfe_eptseal; -- int argc = fw_arg0; -- char **envp = (char **) fw_arg2; -- int *prom_vec = (int *) fw_arg3; -- -- /* -- * Check if a loader was used; if NOT, the 4 arguments are -- * what CFE gives us (handle, 0, EPT and EPTSEAL) -- */ -- if (argc < 0) { -- cfe_handle = (uint32_t)argc; -- cfe_ept = (uint32_t)envp; -- cfe_eptseal = (uint32_t)prom_vec; -- } else { -- if ((int)prom_vec < 0) { -- /* -- * Old loader; all it gives us is the handle, -- * so use the "known" entrypoint and assume -- * the seal. -- */ -- cfe_handle = (uint32_t)prom_vec; -- cfe_ept = 0xBFC00500; -- cfe_eptseal = CFE_EPTSEAL; -- } else { -- /* -- * Newer loaders bundle the handle/ept/eptseal -- * Note: prom_vec is in the loader's useg -- * which is still alive in the TLB. -- */ -- cfe_handle = prom_vec[0]; -- cfe_ept = prom_vec[2]; -- cfe_eptseal = prom_vec[3]; -- } -- } -+ -+ cfe_eptseal = (uint32_t) fw_arg3; -+ cfe_handle = (uint32_t) fw_arg0; -+ cfe_ept = (uint32_t) fw_arg2; - - if (cfe_eptseal != CFE_EPTSEAL) { -- /* too early for panic to do any good */ - printk(KERN_ERR "CFE's entrypoint seal doesn't match."); -- while (1) ; -+ return -1; - } - - cfe_init(cfe_handle, cfe_ept); --} -- --static __init void prom_init_console(void) --{ -- /* Initialize CFE console */ -- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); --} -- --static __init void prom_init_cmdline(void) --{ -- static char buf[COMMAND_LINE_SIZE] __initdata; -- -- /* Get the kernel command line from CFE */ -- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) { -- buf[COMMAND_LINE_SIZE - 1] = 0; -- strcpy(arcs_cmdline, buf); -- } -- -- /* Force a console handover by adding a console= argument if needed, -- * as CFE is not available anymore later in the boot process. */ -- if ((strstr(arcs_cmdline, "console=")) == NULL) { -- /* Try to read the default serial port used by CFE */ -- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0) -- || (strncmp("uart", buf, 4))) -- /* Default to uart0 */ -- strcpy(buf, "uart0"); -- -- /* Compute the new command line */ -- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", -- arcs_cmdline, buf[4]); -- } -+ return 0; - } - - static __init void prom_init_mem(void) -@@ -161,8 +93,6 @@ static __init void prom_init_mem(void) - void __init prom_init(void) - { - prom_init_cfe(); -- prom_init_console(); -- prom_init_cmdline(); - prom_init_mem(); - } - diff --git a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch b/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch deleted file mode 100644 index f6d131d845..0000000000 --- a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -121,14 +121,6 @@ - #endif - .endm - --#ifndef CONFIG_NO_EXCEPT_FILL -- /* -- * Reserved space for exception handlers. -- * Necessary for machines which link their kernels at KSEG0. -- */ -- .fill 0x400 --#endif -- - EXPORT(_stext) - - #ifdef CONFIG_BOOT_RAW -@@ -141,6 +133,14 @@ FEXPORT(__kernel_entry) - j kernel_entry - #endif - -+#ifndef CONFIG_NO_EXCEPT_FILL -+ /* -+ * Reserved space for exception handlers. -+ * Necessary for machines which link their kernels at KSEG0. -+ */ -+ .fill 0x400 -+#endif -+ - #ifdef CONFIG_IMAGE_CMDLINE_HACK - .ascii "CMDLINE:" - EXPORT(__image_cmdline) ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -86,6 +86,7 @@ config ATH79 - - config BCM47XX - bool "Broadcom BCM47XX based boards" -+ select BOOT_RAW - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT diff --git a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch deleted file mode 100644 index 2bc7718c34..0000000000 --- a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h -+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h -@@ -136,6 +136,10 @@ static inline int gpio_polarity(unsigned - return -EINVAL; - } - -+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -+{ -+ return -ENOSYS; -+} - - /* cansleep wrappers */ - #include diff --git a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch deleted file mode 100644 index 479e66f681..0000000000 --- a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch +++ /dev/null @@ -1,367 +0,0 @@ ---- a/arch/mips/include/asm/r4kcache.h -+++ b/arch/mips/include/asm/r4kcache.h -@@ -17,6 +17,20 @@ - #include - #include - -+#ifdef CONFIG_BCM47XX -+#include -+#include -+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE))) -+ -+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) -+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind - static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns - static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns - static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue - } -@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns - */ - static inline void protected_flush_icache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Invalidate_I, addr); - } - -@@ -219,6 +237,7 @@ static inline void protected_flush_icach - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Writeback_Inv_D, addr); - } - -@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag - : "r" (base), \ - "i" (op)); - -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Hit_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ } -+ } -+} -+ -+ - /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ --#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ -+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ - static inline void blast_##pfx##cache##lsize(void) \ - { \ - unsigned long start = INDEX_BASE; \ -@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l - \ - __##pfx##flush_prologue \ - \ -+ war \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ -@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l - \ - __##pfx##flush_prologue \ - \ -+ war \ - do { \ - cache##lsize##_unroll32(start, hitop); \ - start += lsize * 32; \ -@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ -+ war \ -+ \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ -@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) -- --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) -+ -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) - - /* build blast_xxx_range, protected_blast_xxx_range */ --#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ - static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ - { \ - unsigned long lsize = cpu_##desc##_line_size(); \ - unsigned long addr = start & ~(lsize - 1); \ - unsigned long aend = (end - 1) & ~(lsize - 1); \ -+ war \ - \ - __##pfx##flush_prologue \ - \ - while (1) { \ -+ war2 \ - prot##cache_op(hitop, addr); \ - if (addr == aend) \ - break; \ -@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) - /* blast_inv_dcache_range */ --__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) --__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) -+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) - - #endif /* _ASM_R4KCACHE_H */ ---- a/arch/mips/include/asm/stackframe.h -+++ b/arch/mips/include/asm/stackframe.h -@@ -449,6 +449,10 @@ - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set mips3 -+#ifdef CONFIG_BCM47XX -+ nop -+ nop -+#endif - eret - .set mips0 - .endm ---- a/arch/mips/kernel/genex.S -+++ b/arch/mips/kernel/genex.S -@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp) - NESTED(except_vec3_generic, 0, sp) - .set push - .set noat -+#ifdef CONFIG_BCM47XX -+ nop -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -35,6 +35,9 @@ - #include /* for run_uncached() */ - - -+/* For enabling BCM4710 cache workarounds */ -+int bcm4710 = 0; -+ - /* - * Special Variant of smp_call_function for use by cache functions: - * -@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page_indexed = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else - if (dc_lsize == 0) - r4k_blast_dcache = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -679,6 +691,8 @@ static void local_r4k_flush_cache_sigtra - unsigned long addr = (unsigned long) arg; - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - if (dc_lsize) - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store && scache_size) -@@ -1309,6 +1323,17 @@ static void __cpuinit coherency_setup(vo - * silly idea of putting something else there ... - */ - switch (current_cpu_type()) { -+ case CPU_BMIPS3300: -+ { -+ u32 cm; -+ cm = read_c0_diag(); -+ /* Enable icache */ -+ cm |= (1 << 31); -+ /* Enable dcache */ -+ cm |= (1 << 30); -+ write_c0_diag(cm); -+ } -+ break; - case CPU_R4000PC: - case CPU_R4000SC: - case CPU_R4000MC: -@@ -1365,6 +1390,15 @@ void __cpuinit r4k_cache_init(void) - break; - } - -+ /* Check if special workarounds are required */ -+#ifdef CONFIG_BCM47XX -+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+#endif -+ bcm4710 = 0; -+ - probe_pcache(); - setup_scache(); - -@@ -1423,5 +1457,13 @@ void __cpuinit r4k_cache_init(void) - #if !defined(CONFIG_MIPS_CMP) - local_r4k___flush_cache_all(NULL); - #endif -+#ifdef CONFIG_BCM47XX -+ { -+ static void (*_coherency_setup)(void); -+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); -+ _coherency_setup(); -+ } -+#else - coherency_setup(); -+#endif - } ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -1188,6 +1188,9 @@ static void __cpuinit build_r4000_tlb_re - /* No need for uasm_i_nop */ - } - -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ - #else -@@ -1707,6 +1710,9 @@ build_r4000_tlbchange_handler_head(u32 * - struct uasm_reloc **r, unsigned int pte, - unsigned int ptr) - { -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ - #else diff --git a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch deleted file mode 100644 index 9253e915ed..0000000000 --- a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch +++ /dev/null @@ -1,77 +0,0 @@ ---- a/arch/mips/include/asm/cpu-features.h -+++ b/arch/mips/include/asm/cpu-features.h -@@ -110,6 +110,9 @@ - #ifndef cpu_has_pindexed_dcache - #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) - #endif -+#ifndef cpu_use_kmap_coherent -+#define cpu_use_kmap_coherent 1 -+#endif - - /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h -@@ -0,0 +1,13 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) -+ */ -+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_use_kmap_coherent 0 -+ -+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache - */ - map_coherent = (cpu_has_dc_aliases && - page_mapped(page) && !Page_dcache_dirty(page)); -- if (map_coherent) -+ if (map_coherent && cpu_use_kmap_coherent) - vaddr = kmap_coherent(page, addr); - else - vaddr = kmap_atomic(page, KM_USER0); -@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache - } - - if (vaddr) { -- if (map_coherent) -+ if (map_coherent && cpu_use_kmap_coherent) - kunmap_coherent(); - else - kunmap_atomic(vaddr, KM_USER0); ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to, - void *vfrom, *vto; - - vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(from) && !Page_dcache_dirty(from)) { - vfrom = kmap_coherent(from, vaddr); - copy_page(vto, vfrom); -@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(page) && !Page_dcache_dirty(page)) { - void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(vto, src, len); -@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(page) && !Page_dcache_dirty(page)) { - void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(dst, vfrom, len); diff --git a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch deleted file mode 100644 index 49f7999149..0000000000 --- a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru - error: - pr_warning("PHY: cannot reset MII transceiver isolate bit\n"); - } -+ -+static inline int startswith (const char *source, const char *cmp) -+{ -+ return !strncmp(source,cmp,strlen(cmp)); -+} -+ -+static inline void b44_bcm47xx_workarounds(struct b44 *bp) -+{ -+ char buf[20]; -+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */ -+ if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0) -+ return; -+ if (simple_strtoul(buf, NULL, 0) == 100) { -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ } else { -+ /* WL-HDD */ -+ struct ssb_device *sdev = bp->sdev; -+ if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0) -+ return; -+ if (startswith(buf, "WL300-")) { -+ if (sdev->bus->sprom.et0phyaddr == 0 && -+ sdev->bus->sprom.et1phyaddr == 1) -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ } -+ } -+ return; -+} - #else - static inline void b44_wap54g10_workaround(struct b44 *bp) - { - } -+ -+static inline void b44_bcm47xx_workarounds(struct b44 *bp) -+{ -+} - #endif - - static int b44_setup_phy(struct b44 *bp) -@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp) - int err; - - b44_wap54g10_workaround(bp); -+ b44_bcm47xx_workarounds(bp); - - if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) - return 0; -@@ -2089,6 +2121,8 @@ static int __devinit b44_get_invariants( - * valid PHY address. */ - bp->phy_addr &= 0x1F; - -+ b44_bcm47xx_workarounds(bp); -+ - memcpy(bp->dev->dev_addr, addr, 6); - - if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ diff --git a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch deleted file mode 100644 index f333d71d80..0000000000 --- a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp, - udelay(10); - } - if (i == timeout) { -+#if 0 - if (net_ratelimit()) - netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n", - bit, reg, clear ? "clear" : "set"); -- -+#endif - return -ENODEV; - } - return 0; diff --git a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch deleted file mode 100644 index 61f0a7ecad..0000000000 --- a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -317,6 +317,8 @@ void ssb_chipco_resume(struct ssb_chipco - void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { -@@ -340,6 +342,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ - void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -241,6 +241,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - - if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { - rate = 200000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 240000000; - } else { - rate = ssb_calc_clock_rate(pll_type, n, m); - } ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) - - if (bus->chip_id == 0x5365) { - rate = 100000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 120000000; - } else { - rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); - if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ diff --git a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch deleted file mode 100644 index c535c05db5..0000000000 --- a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch +++ /dev/null @@ -1,25 +0,0 @@ -This prevents the options from being delete with make kernel_oldconfig. ---- - drivers/ssb/Kconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE - config BCMA_HOST_SOC - bool - depends on BCMA_DRIVER_MIPS -+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD - - config BCMA_SFLASH - bool ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -147,6 +147,7 @@ config SSB_SFLASH - config SSB_EMBEDDED - bool - depends on SSB_DRIVER_MIPS -+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD - default y - - config SSB_DRIVER_EXTIF diff --git a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch deleted file mode 100644 index 686fb1b945..0000000000 --- a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/include/asm/cacheflush.h -+++ b/arch/mips/include/asm/cacheflush.h -@@ -32,7 +32,7 @@ - extern void (*flush_cache_all)(void); - extern void (*__flush_cache_all)(void); - extern void (*flush_cache_mm)(struct mm_struct *mm); --#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - extern void (*flush_cache_range)(struct vm_area_struct *vma, - unsigned long start, unsigned long end); - extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch deleted file mode 100644 index abfb947e55..0000000000 --- a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac - } - } - --static void r4k___flush_cache_all(void) -+void r4k___flush_cache_all(void) - { - r4k_on_each_cpu(local_r4k___flush_cache_all, NULL); - } -@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache - } - } - --static void r4k_flush_cache_page(struct vm_area_struct *vma, -+void r4k_flush_cache_page(struct vm_area_struct *vma, - unsigned long addr, unsigned long pfn) - { - struct flush_cache_page_args args; -@@ -1467,3 +1467,7 @@ void __cpuinit r4k_cache_init(void) - coherency_setup(); - #endif - } -+ -+/* fuse package DCACHE BUG patch exports */ -+void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all; -+EXPORT_SYMBOL(fuse_flush_cache_all); diff --git a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch b/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch deleted file mode 100644 index 12e7251061..0000000000 --- a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/fs/fuse/dev.c -+++ b/fs/fuse/dev.c -@@ -651,11 +651,20 @@ static int fuse_copy_fill(struct fuse_co - return lock_request(cs->fc, cs->req); - } - -+#ifdef DCACHE_BUG -+extern void (*fuse_flush_cache_all)(void); -+#endif -+ - /* Do as much copy to/from userspace buffer as we can */ - static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size) - { - unsigned ncpy = min(*size, cs->len); - if (val) { -+#ifdef DCACHE_BUG -+ // patch from mailing list, it is very important, otherwise, -+ // can't mount, or ls mount point will hang -+ fuse_flush_cache_all(); -+#endif - if (cs->write) - memcpy(cs->buf, *val, ncpy); - else ---- a/fs/fuse/fuse_i.h -+++ b/fs/fuse/fuse_i.h -@@ -8,6 +8,7 @@ - - #ifndef _FS_FUSE_I_H - #define _FS_FUSE_I_H -+#define DCACHE_BUG - - #include - #include ---- a/fs/fuse/inode.c -+++ b/fs/fuse/inode.c -@@ -1202,6 +1202,10 @@ static int __init fuse_init(void) - printk(KERN_INFO "fuse init (API version %i.%i)\n", - FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION); - -+#ifdef DCACHE_BUG -+ printk("fuse init DCACHE_BUG workaround enabled\n"); -+#endif -+ - INIT_LIST_HEAD(&fuse_conn_list); - res = fuse_fs_init(); - if (res) diff --git a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch deleted file mode 100644 index 2bc05c4562..0000000000 --- a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- a/arch/mips/include/asm/page.h -+++ b/arch/mips/include/asm/page.h -@@ -43,6 +43,7 @@ - #ifndef __ASSEMBLY__ - - #include -+#include - #include - - extern void build_clear_page(void); -@@ -78,13 +79,16 @@ static inline void clear_user_page(void - flush_data_cache_page((unsigned long)addr); - } - --extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -- struct page *to); --struct vm_area_struct; --extern void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma); -+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -+ struct page *to) -+{ -+ extern void (*flush_data_cache_page)(unsigned long addr); - --#define __HAVE_ARCH_COPY_USER_HIGHPAGE -+ copy_page(vto, vfrom); -+ if (!cpu_has_ic_fills_f_dc || -+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -+ flush_data_cache_page((unsigned long)vto); -+} - - /* - * These are used to make use of C type-checking.. ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -202,30 +202,6 @@ void kunmap_coherent(void) - preempt_check_resched(); - } - --void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma) --{ -- void *vfrom, *vto; -- -- vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && -- page_mapped(from) && !Page_dcache_dirty(from)) { -- vfrom = kmap_coherent(from, vaddr); -- copy_page(vto, vfrom); -- kunmap_coherent(); -- } else { -- vfrom = kmap_atomic(from, KM_USER0); -- copy_page(vto, vfrom); -- kunmap_atomic(vfrom, KM_USER0); -- } -- if ((!cpu_has_ic_fills_f_dc) || -- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -- flush_data_cache_page((unsigned long)vto); -- kunmap_atomic(vto, KM_USER1); -- /* Make sure this page is cleared on other CPU's too before using it */ -- smp_wmb(); --} -- - void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) diff --git a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch deleted file mode 100644 index 46d47e3d01..0000000000 --- a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -199,3 +199,30 @@ int nvram_getenv(char *name, char *val, - return NVRAM_ERR_ENVNOTFOUND; - } - EXPORT_SYMBOL(nvram_getenv); -+ -+char *nvram_get(const char *name) -+{ -+ char *var, *value, *end, *eq; -+ -+ if (!name) -+ return NULL; -+ -+ if (!nvram_buf[0]) -+ early_nvram_init(); -+ -+ /* Look for name=value and return value */ -+ var = &nvram_buf[sizeof(struct nvram_header)]; -+ end = nvram_buf + sizeof(nvram_buf) - 2; -+ end[0] = end[1] = '\0'; -+ for (; *var; var = value + strlen(value) + 1) { -+ eq = strchr(var, '='); -+ if (!eq) -+ break; -+ value = eq + 1; -+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) -+ return value; -+ } -+ -+ return NULL; -+} -+EXPORT_SYMBOL(nvram_get); ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -468,3 +468,20 @@ static int __init bcm47xx_register_flash - return -1; - } - fs_initcall(bcm47xx_register_flash); -+ -+static int __init bcm47xx_register_gpiodev(void) -+{ -+ static struct resource res = { -+ .start = 0xFFFFFFFF, -+ }; -+ struct platform_device *pdev; -+ -+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); -+ if (!pdev) { -+ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n"); -+ return -ENODEV; -+ } -+ -+ return 0; -+} -+device_initcall(bcm47xx_register_gpiodev); diff --git a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch deleted file mode 100644 index 7860ca0dd8..0000000000 --- a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; -- if (!r->start && r->end) { -- printk(KERN_ERR "PCI: Device %s not available " -- "because of resource collisions\n", -+ if (!r->start && r->end) -+ printk(KERN_WARNING "PCI: Device %s resource" -+ "collisions detected. Ignoring...\n", - pci_name(dev)); -- return -EINVAL; -- } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) diff --git a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch deleted file mode 100644 index f254b203bd..0000000000 --- a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/include/linux/ide.h -+++ b/include/linux/ide.h -@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st - hw->io_ports.ctl_addr = ctl_addr; - } - -+#if defined CONFIG_BCM47XX -+# define MAX_HWIFS 2 -+#else - #define MAX_HWIFS 10 -+#endif - - /* - * Now for the data we need to maintain per-drive: ide_drive_t diff --git a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch deleted file mode 100644 index d429573f2d..0000000000 --- a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch +++ /dev/null @@ -1,325 +0,0 @@ ---- a/drivers/net/tg3.c -+++ b/drivers/net/tg3.c -@@ -43,6 +43,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -515,7 +516,8 @@ static void _tw32_flush(struct tg3 *tp, - static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) - { - tp->write32_mbox(tp, off, val); -- if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)) -+ if (tg3_flag(tp, FLUSH_POSTED_WRITES) || -+ (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))) - tp->read32_mbox(tp, off); - } - -@@ -525,7 +527,7 @@ static void tg3_write32_tx_mbox(struct t - writel(val, mbox); - if (tg3_flag(tp, TXD_MBOX_HWBUG)) - writel(val, mbox); -- if (tg3_flag(tp, MBOX_WRITE_REORDER)) -+ if (tg3_flag(tp, MBOX_WRITE_REORDER) || tg3_flag(tp, FLUSH_POSTED_WRITES)) - readl(mbox); - } - -@@ -804,7 +806,7 @@ static void tg3_switch_clocks(struct tg3 - - #define PHY_BUSY_LOOPS 5000 - --static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val) - { - u32 frame_val; - unsigned int loops; -@@ -818,7 +820,7 @@ static int tg3_readphy(struct tg3 *tp, i - - *val = 0x0; - -- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -853,7 +855,12 @@ static int tg3_readphy(struct tg3 *tp, i - return ret; - } - --static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+{ -+ return __tg3_readphy(tp, tp->phy_addr, reg, val); -+} -+ -+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val) - { - u32 frame_val; - unsigned int loops; -@@ -869,7 +876,7 @@ static int tg3_writephy(struct tg3 *tp, - udelay(80); - } - -- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -902,6 +909,11 @@ static int tg3_writephy(struct tg3 *tp, - return ret; - } - -+static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+{ -+ return __tg3_writephy(tp, tp->phy_addr, reg, val); -+} -+ - static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val) - { - int err; -@@ -2532,6 +2544,9 @@ static int tg3_nvram_read(struct tg3 *tp - { - int ret; - -+ if (tg3_flag(tp, IS_SSB_CORE)) -+ return -ENODEV; -+ - if (!tg3_flag(tp, NVRAM)) - return tg3_nvram_read_using_eeprom(tp, offset, val); - -@@ -2855,8 +2870,10 @@ static int tg3_power_down_prepare(struct - tg3_frob_aux_power(tp); - - /* Workaround for unstable PLL clock */ -- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || -- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) { -+ if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 && -+ /* !!! FIXME !!! */ -+ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || -+ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) { - u32 val = tr32(0x7d00); - - val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); -@@ -3377,6 +3394,14 @@ relink: - if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) { - tg3_phy_copper_begin(tp); - -+ if (tg3_flag(tp, ROBOSWITCH)) { -+ current_link_up = 1; -+ current_speed = SPEED_1000; /* FIXME */ -+ current_duplex = DUPLEX_FULL; -+ tp->link_config.active_speed = current_speed; -+ tp->link_config.active_duplex = current_duplex; -+ } -+ - tg3_readphy(tp, MII_BMSR, &bmsr); - if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) || - (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)) -@@ -6962,6 +6987,11 @@ static int tg3_poll_fw(struct tg3 *tp) - int i; - u32 val; - -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { - /* Wait up to 20ms for init done. */ - for (i = 0; i < 200; i++) { -@@ -7251,6 +7281,14 @@ static int tg3_chip_reset(struct tg3 *tp - tw32(0x5000, 0x400); - } - -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* BCM4785: In order to avoid repercussions from using potentially -+ * defective internal ROM, stop the Rx RISC CPU, which is not -+ * required. */ -+ tg3_stop_fw(tp); -+ tg3_halt_cpu(tp, RX_CPU_BASE); -+ } -+ - tw32(GRC_MODE, tp->grc_mode); - - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { -@@ -7403,9 +7441,12 @@ static int tg3_halt_cpu(struct tg3 *tp, - return -ENODEV; - } - -- /* Clear firmware's nvram arbitration. */ -- if (tg3_flag(tp, NVRAM)) -- tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ if (!tg3_flag(tp, IS_SSB_CORE)) { -+ /* Clear firmware's nvram arbitration. */ -+ if (tg3_flag(tp, NVRAM)) -+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ } -+ - return 0; - } - -@@ -7467,6 +7508,11 @@ static int tg3_load_5701_a0_firmware_fix - const __be32 *fw_data; - int err, i; - -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - fw_data = (void *)tp->fw->data; - - /* Firmware blob starts with version numbers, followed by -@@ -7523,6 +7569,11 @@ static int tg3_load_tso_firmware(struct - unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size; - int err, i; - -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (tg3_flag(tp, HW_TSO_1) || - tg3_flag(tp, HW_TSO_2) || - tg3_flag(tp, HW_TSO_3)) -@@ -8819,6 +8870,11 @@ static void tg3_timer(unsigned long __op - - spin_lock(&tp->lock); - -+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { -+ /* BCM4785: Flush posted writes from GbE to host memory. */ -+ tr32(HOSTCC_MODE); -+ } -+ - if (!tg3_flag(tp, TAGGED_STATUS)) { - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip -@@ -10446,6 +10502,11 @@ static int tg3_test_nvram(struct tg3 *tp - if (tg3_flag(tp, NO_NVRAM)) - return 0; - -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* We don't have NVRAM. */ -+ return 0; -+ } -+ - if (tg3_nvram_read(tp, 0, &magic) != 0) - return -EIO; - -@@ -11440,7 +11501,7 @@ static int tg3_ioctl(struct net_device * - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); -+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); - spin_unlock_bh(&tp->lock); - - data->val_out = mii_regval; -@@ -11456,7 +11517,7 @@ static int tg3_ioctl(struct net_device * - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); -+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_bh(&tp->lock); - - return err; -@@ -12186,6 +12247,13 @@ static void __devinit tg3_get_5720_nvram - /* Chips other than 5700/5701 use the NVRAM for fetching info. */ - static void __devinit tg3_nvram_init(struct tg3 *tp) - { -+ if (tg3_flag(tp, IS_SSB_CORE)) { -+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ -+ tg3_flag_clear(tp, NVRAM); -+ tg3_flag_clear(tp, NVRAM_BUFFERED); -+ return; -+ } -+ - tw32_f(GRC_EEPROM_ADDR, - (EEPROM_ADDR_FSM_RESET | - (EEPROM_DEFAULT_CLOCK_PERIOD << -@@ -12452,6 +12520,9 @@ static int tg3_nvram_write_block(struct - { - int ret; - -+ if (tg3_flag(tp, IS_SSB_CORE)) -+ return -ENODEV; -+ - if (tg3_flag(tp, EEPROM_WRITE_PROT)) { - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & - ~GRC_LCLCTRL_GPIO_OUTPUT1); -@@ -13863,6 +13934,11 @@ static int __devinit tg3_get_invariants( - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) - tg3_flag_set(tp, SRAM_USE_CONFIG); - -+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { -+ tp->write32_tx_mbox = tg3_write_flush_reg32; -+ tp->write32_rx_mbox = tg3_write_flush_reg32; -+ } -+ - /* Get eeprom hw config before calling tg3_set_power_state(). - * In particular, the TG3_FLAG_IS_NIC flag must be - * determined before calling tg3_set_power_state() so that -@@ -14274,6 +14350,8 @@ static int __devinit tg3_get_device_addr - } - - if (!is_valid_ether_addr(&dev->dev_addr[0])) { -+ if (tg3_flag(tp, IS_SSB_CORE)) -+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); - #ifdef CONFIG_SPARC - if (!tg3_get_default_macaddr_sparc(tp)) - return 0; -@@ -14772,6 +14850,7 @@ static char * __devinit tg3_phy_string(s - case TG3_PHY_ID_BCM5704: return "5704"; - case TG3_PHY_ID_BCM5705: return "5705"; - case TG3_PHY_ID_BCM5750: return "5750"; -+ case TG3_PHY_ID_BCM5750_2: return "5750-2"; - case TG3_PHY_ID_BCM5752: return "5752"; - case TG3_PHY_ID_BCM5714: return "5714"; - case TG3_PHY_ID_BCM5780: return "5780"; -@@ -14961,6 +15040,13 @@ static int __devinit tg3_init_one(struct - tp->msg_enable = tg3_debug; - else - tp->msg_enable = TG3_DEF_MSG_ENABLE; -+ if (pdev_is_ssb_gige_core(pdev)) { -+ tg3_flag_set(tp, IS_SSB_CORE); -+ if (ssb_gige_must_flush_posted_writes(pdev)) -+ tg3_flag_set(tp, FLUSH_POSTED_WRITES); -+ if (ssb_gige_have_roboswitch(pdev)) -+ tg3_flag_set(tp, ROBOSWITCH); -+ } - - /* The word/byte swap controls here control register access byte - * swapping. DMA data byte swapping is controlled in the GRC_MODE ---- a/drivers/net/tg3.h -+++ b/drivers/net/tg3.h -@@ -2901,6 +2901,9 @@ enum TG3_FLAGS { - TG3_FLAG_57765_PLUS, - TG3_FLAG_APE_HAS_NCSI, - TG3_FLAG_5717_PLUS, -+ TG3_FLAG_IS_SSB_CORE, -+ TG3_FLAG_FLUSH_POSTED_WRITES, -+ TG3_FLAG_ROBOSWITCH, - - /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */ - TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */ -@@ -3051,6 +3054,7 @@ struct tg3 { - #define TG3_PHY_ID_BCM5704 0x60008190 - #define TG3_PHY_ID_BCM5705 0x600081a0 - #define TG3_PHY_ID_BCM5750 0x60008180 -+#define TG3_PHY_ID_BCM5750_2 0xbc050cd0 - #define TG3_PHY_ID_BCM5752 0x60008100 - #define TG3_PHY_ID_BCM5714 0x60008340 - #define TG3_PHY_ID_BCM5780 0x60008350 -@@ -3088,7 +3092,7 @@ struct tg3 { - (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \ - (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \ - (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \ -- (X) == TG3_PHY_ID_BCM8002) -+ (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2) - - u32 phy_flags; - #define TG3_PHYFLG_IS_LOW_POWER 0x00000001 diff --git a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch deleted file mode 100644 index 6bc34549fe..0000000000 --- a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch +++ /dev/null @@ -1,180 +0,0 @@ ---- a/arch/mips/bcm47xx/Makefile -+++ b/arch/mips/bcm47xx/Makefile -@@ -4,4 +4,3 @@ - # - - obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o --obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o ---- a/arch/mips/bcm47xx/wgt634u.c -+++ /dev/null -@@ -1,170 +0,0 @@ --/* -- * This file is subject to the terms and conditions of the GNU General Public -- * License. See the file "COPYING" in the main directory of this archive -- * for more details. -- * -- * Copyright (C) 2007 Aurelien Jarno -- */ -- --#include --#include --#include --#include --#include --#include --#include --#include --#include -- --/* GPIO definitions for the WGT634U */ --#define WGT634U_GPIO_LED 3 --#define WGT634U_GPIO_RESET 2 --#define WGT634U_GPIO_TP1 7 --#define WGT634U_GPIO_TP2 6 --#define WGT634U_GPIO_TP3 5 --#define WGT634U_GPIO_TP4 4 --#define WGT634U_GPIO_TP5 1 -- --static struct gpio_led wgt634u_leds[] = { -- { -- .name = "power", -- .gpio = WGT634U_GPIO_LED, -- .active_low = 1, -- .default_trigger = "heartbeat", -- }, --}; -- --static struct gpio_led_platform_data wgt634u_led_data = { -- .num_leds = ARRAY_SIZE(wgt634u_leds), -- .leds = wgt634u_leds, --}; -- --static struct platform_device wgt634u_gpio_leds = { -- .name = "leds-gpio", -- .id = -1, -- .dev = { -- .platform_data = &wgt634u_led_data, -- } --}; -- -- --/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U -- firmware. */ --static struct mtd_partition wgt634u_partitions[] = { -- { -- .name = "cfe", -- .offset = 0, -- .size = 0x60000, /* 384k */ -- .mask_flags = MTD_WRITEABLE /* force read-only */ -- }, -- { -- .name = "config", -- .offset = 0x60000, -- .size = 0x20000 /* 128k */ -- }, -- { -- .name = "linux", -- .offset = 0x80000, -- .size = 0x140000 /* 1280k */ -- }, -- { -- .name = "jffs", -- .offset = 0x1c0000, -- .size = 0x620000 /* 6272k */ -- }, -- { -- .name = "nvram", -- .offset = 0x7e0000, -- .size = 0x20000 /* 128k */ -- }, --}; -- --static struct physmap_flash_data wgt634u_flash_data = { -- .parts = wgt634u_partitions, -- .nr_parts = ARRAY_SIZE(wgt634u_partitions) --}; -- --static struct resource wgt634u_flash_resource = { -- .flags = IORESOURCE_MEM, --}; -- --static struct platform_device wgt634u_flash = { -- .name = "physmap-flash", -- .id = 0, -- .dev = { .platform_data = &wgt634u_flash_data, }, -- .resource = &wgt634u_flash_resource, -- .num_resources = 1, --}; -- --/* Platform devices */ --static struct platform_device *wgt634u_devices[] __initdata = { -- &wgt634u_flash, -- &wgt634u_gpio_leds, --}; -- --static irqreturn_t gpio_interrupt(int irq, void *ignored) --{ -- int state; -- -- /* Interrupts are shared, check if the current one is -- a GPIO interrupt. */ -- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco, -- SSB_CHIPCO_IRQ_GPIO)) -- return IRQ_NONE; -- -- state = gpio_get_value(WGT634U_GPIO_RESET); -- -- /* Interrupt are level triggered, revert the interrupt polarity -- to clear the interrupt. */ -- gpio_polarity(WGT634U_GPIO_RESET, state); -- -- if (!state) { -- printk(KERN_INFO "Reset button pressed"); -- ctrl_alt_del(); -- } -- -- return IRQ_HANDLED; --} -- --static int __init wgt634u_init(void) --{ -- /* There is no easy way to detect that we are running on a WGT634U -- * machine. Use the MAC address as an heuristic. Netgear Inc. has -- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. -- */ -- u8 *et0mac; -- -- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) -- return -ENODEV; -- -- et0mac = bcm47xx_bus.ssb.sprom.et0mac; -- -- if (et0mac[0] == 0x00 && -- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) || -- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) { -- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; -- -- printk(KERN_INFO "WGT634U machine detected.\n"); -- -- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), -- gpio_interrupt, IRQF_SHARED, -- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) { -- gpio_direction_input(WGT634U_GPIO_RESET); -- gpio_intmask(WGT634U_GPIO_RESET, 1); -- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco, -- SSB_CHIPCO_IRQ_GPIO, -- SSB_CHIPCO_IRQ_GPIO); -- } -- -- wgt634u_flash_data.width = mcore->pflash.buswidth; -- wgt634u_flash_resource.start = mcore->pflash.window; -- wgt634u_flash_resource.end = mcore->pflash.window -- + mcore->pflash.window_size -- - 1; -- return platform_add_devices(wgt634u_devices, -- ARRAY_SIZE(wgt634u_devices)); -- } else -- return -ENODEV; --} -- --module_init(wgt634u_init); diff --git a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch deleted file mode 100644 index 88a40e2bc3..0000000000 --- a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch +++ /dev/null @@ -1,305 +0,0 @@ -The Netgear wgt634u uses a different format for storing the -configuration. This patch is needed to read out the correct -configuration. The cfe_env.c file uses a different method way to read -out the configuration than the in kernel cfe config reader. - ---- a/arch/mips/bcm47xx/Makefile -+++ b/arch/mips/bcm47xx/Makefile -@@ -3,4 +3,4 @@ - # under Linux. - # - --obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o -+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o cfe_env.o ---- /dev/null -+++ b/arch/mips/bcm47xx/cfe_env.c -@@ -0,0 +1,229 @@ -+/* -+ * CFE environment variable access -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * Copyright 2006, Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NVRAM_SIZE (0x1ff0) -+static char _nvdata[NVRAM_SIZE]; -+static char _valuestr[256]; -+ -+/* -+ * TLV types. These codes are used in the "type-length-value" -+ * encoding of the items stored in the NVRAM device (flash or EEPROM) -+ * -+ * The layout of the flash/nvram is as follows: -+ * -+ * -+ * -+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. -+ * The "length" field marks the length of the data section, not -+ * including the type and length fields. -+ * -+ * Environment variables are stored as follows: -+ * -+ * = -+ * -+ * If bit 0 (low bit) is set, the length is an 8-bit value. -+ * If bit 0 (low bit) is clear, the length is a 16-bit value -+ * -+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still -+ * indicates the size of the length field. -+ * -+ * Flags are from the constants below: -+ * -+ */ -+#define ENV_LENGTH_16BITS 0x00 /* for low bit */ -+#define ENV_LENGTH_8BITS 0x01 -+ -+#define ENV_TYPE_USER 0x80 -+ -+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) -+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) -+ -+/* -+ * The actual TLV types we support -+ */ -+ -+#define ENV_TLV_TYPE_END 0x00 -+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) -+ -+/* -+ * Environment variable flags -+ */ -+ -+#define ENV_FLG_NORMAL 0x00 /* normal read/write */ -+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ -+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ -+ -+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ -+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ -+ -+ -+/* ********************************************************************* -+ * _nvram_read(buffer,offset,length) -+ * -+ * Read data from the NVRAM device -+ * -+ * Input parameters: -+ * buffer - destination buffer -+ * offset - offset of data to read -+ * length - number of bytes to read -+ * -+ * Return value: -+ * number of bytes read, or <0 if error occured -+ ********************************************************************* */ -+static int -+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) -+{ -+ int i; -+ if (offset > NVRAM_SIZE) -+ return -1; -+ -+ for ( i = 0; i < length; i++) { -+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; -+ } -+ return length; -+} -+ -+ -+static char* -+_strnchr(const char *dest,int c,size_t cnt) -+{ -+ while (*dest && (cnt > 0)) { -+ if (*dest == c) return (char *) dest; -+ dest++; -+ cnt--; -+ } -+ return NULL; -+} -+ -+ -+ -+/* -+ * Core support API: Externally visible. -+ */ -+ -+/* -+ * Get the value of an NVRAM variable -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ -+ -+char* -+cfe_env_get(unsigned char *nv_buf, char* name) -+{ -+ int size; -+ unsigned char *buffer; -+ unsigned char *ptr; -+ unsigned char *envval; -+ unsigned int reclen; -+ unsigned int rectype; -+ int offset; -+ int flg; -+ -+ if (!strcmp(name, "nvram_type")) -+ return "cfe"; -+ -+ size = NVRAM_SIZE; -+ buffer = &_nvdata[0]; -+ -+ ptr = buffer; -+ offset = 0; -+ -+ /* Read the record type and length */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ -+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { -+ -+ /* Adjust pointer for TLV type */ -+ rectype = *(ptr); -+ offset++; -+ size--; -+ -+ /* -+ * Read the length. It can be either 1 or 2 bytes -+ * depending on the code -+ */ -+ if (rectype & ENV_LENGTH_8BITS) { -+ /* Read the record type and length - 8 bits */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ reclen = *(ptr); -+ size--; -+ offset++; -+ } -+ else { -+ /* Read the record type and length - 16 bits, MSB first */ -+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { -+ goto error; -+ } -+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); -+ size -= 2; -+ offset += 2; -+ } -+ -+ if (reclen > size) -+ break; /* should not happen, bad NVRAM */ -+ -+ switch (rectype) { -+ case ENV_TLV_TYPE_ENV: -+ /* Read the TLV data */ -+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) -+ goto error; -+ flg = *ptr++; -+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); -+ if (envval) { -+ *envval++ = '\0'; -+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); -+ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; -+#if 0 -+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); -+#endif -+ if(!strcmp(ptr, name)){ -+ return _valuestr; -+ } -+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) -+ return _valuestr; -+ } -+ break; -+ -+ default: -+ /* Unknown TLV type, skip it. */ -+ break; -+ } -+ -+ /* -+ * Advance to next TLV -+ */ -+ -+ size -= (int)reclen; -+ offset += reclen; -+ -+ /* Read the next record type */ -+ ptr = buffer; -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) -+ goto error; -+ } -+ -+error: -+ return NULL; -+ -+} -+ ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -23,6 +23,8 @@ - #include - - static char nvram_buf[NVRAM_SPACE]; -+static int cfe_env; -+extern char *cfe_env_get(char *nv_buf, const char *name); - - /* Probe for NVRAM header */ - static void early_nvram_init_pflash(void) -@@ -59,6 +61,25 @@ static void early_nvram_init_pflash(void - break; - #endif - } -+ cfe_env = 0; -+ -+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ -+ if (lim >= 8 * 1024 * 1024) { -+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); -+ dst = (u32 *) nvram_buf; -+ -+ if ((*src & 0xff00ff) == 0x000001) { -+ printk("early_nvram_init: WGT634U NVRAM found.\n"); -+ -+ for (i = 0; i < 0x1ff0; i++) { -+ if (*src == 0xFFFFFFFF) -+ break; -+ *dst++ = *src++; -+ } -+ cfe_env = 1; -+ return; -+ } -+ } - - off = FLASH_MIN; - while (off <= lim) { -@@ -181,6 +202,12 @@ int nvram_getenv(char *name, char *val, - if (!nvram_buf[0]) - early_nvram_init(); - -+ if (cfe_env) { -+ value = cfe_env_get(nvram_buf, name); -+ snprintf(val, val_len, "%s", value); -+ return 0; -+ } -+ - /* Look for name=value and return value */ - var = &nvram_buf[sizeof(struct nvram_header)]; - end = nvram_buf + sizeof(nvram_buf) - 2; -@@ -210,6 +237,9 @@ char *nvram_get(const char *name) - if (!nvram_buf[0]) - early_nvram_init(); - -+ if (cfe_env) -+ return cfe_env_get(nvram_buf, name); -+ - /* Look for name=value and return value */ - var = &nvram_buf[sizeof(struct nvram_header)]; - end = nvram_buf + sizeof(nvram_buf) - 2; diff --git a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch b/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch deleted file mode 100644 index faa9380fad..0000000000 --- a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch +++ /dev/null @@ -1,47 +0,0 @@ -commit 812bcf8f47b45a206948008144233bc47d5747ac -Author: Hauke Mehrtens -Date: Thu Dec 16 20:01:17 2010 +0100 - - Revert "tg3: Remove 5720, 5750, and 5750M" - - This reverts commit 67b284d476bcb3d100e946da23d6cf9acfd0465c. - ---- a/drivers/net/tg3.c -+++ b/drivers/net/tg3.c -@@ -235,9 +235,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)}, -+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)}, -+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)}, -+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)}, - {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)}, ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -2077,6 +2077,7 @@ - #define PCI_DEVICE_ID_NX2_57711E 0x1650 - #define PCI_DEVICE_ID_TIGON3_5705 0x1653 - #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 -+#define PCI_DEVICE_ID_TIGON3_5720 0x1658 - #define PCI_DEVICE_ID_TIGON3_5721 0x1659 - #define PCI_DEVICE_ID_TIGON3_5722 0x165a - #define PCI_DEVICE_ID_TIGON3_5723 0x165b -@@ -2092,11 +2093,13 @@ - #define PCI_DEVICE_ID_TIGON3_5754M 0x1672 - #define PCI_DEVICE_ID_TIGON3_5755M 0x1673 - #define PCI_DEVICE_ID_TIGON3_5756 0x1674 -+#define PCI_DEVICE_ID_TIGON3_5750 0x1676 - #define PCI_DEVICE_ID_TIGON3_5751 0x1677 - #define PCI_DEVICE_ID_TIGON3_5715 0x1678 - #define PCI_DEVICE_ID_TIGON3_5715S 0x1679 - #define PCI_DEVICE_ID_TIGON3_5754 0x167a - #define PCI_DEVICE_ID_TIGON3_5755 0x167b -+#define PCI_DEVICE_ID_TIGON3_5750M 0x167c - #define PCI_DEVICE_ID_TIGON3_5751M 0x167d - #define PCI_DEVICE_ID_TIGON3_5751F 0x167e - #define PCI_DEVICE_ID_TIGON3_5787F 0x167f diff --git a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch deleted file mode 100644 index d60247e91a..0000000000 --- a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch +++ /dev/null @@ -1,104 +0,0 @@ ---- a/drivers/watchdog/bcm47xx_wdt.c -+++ b/drivers/watchdog/bcm47xx_wdt.c -@@ -31,6 +31,7 @@ - - #define WDT_DEFAULT_TIME 30 /* seconds */ - #define WDT_MAX_TIME 255 /* seconds */ -+#define WDT_SHIFT 15 /* 32.768 KHz on cores with slow WDT clock */ - - static int wdt_time = WDT_DEFAULT_TIME; - static int nowayout = WATCHDOG_NOWAYOUT; -@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy; - static char expect_release; - static struct timer_list wdt_timer; - static atomic_t ticks; -+static int needs_sw_scale; - --static inline void bcm47xx_wdt_hw_start(void) -+static inline void bcm47xx_wdt_hw_start(u32 ticks) - { -- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */ - switch (bcm47xx_bus_type) { - #ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: -- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff); -+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks); - break; - #endif - #ifdef CONFIG_BCM47XX_BCMA - case BCM47XX_BUS_TYPE_BCMA: - bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, -- 0xfffffff); -+ ticks); - break; - #endif - } -@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo - static void bcm47xx_timer_tick(unsigned long unused) - { - if (!atomic_dec_and_test(&ticks)) { -- bcm47xx_wdt_hw_start(); -+ /* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */ -+ bcm47xx_wdt_hw_start(0xfffffff); - mod_timer(&wdt_timer, jiffies + HZ); - } else { -- printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n"); -+ printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n"); - } - } - --static inline void bcm47xx_wdt_pet(void) -+static void bcm47xx_wdt_pet(void) - { -- atomic_set(&ticks, wdt_time); -+ if(needs_sw_scale) -+ atomic_set(&ticks, wdt_time); -+ else -+ bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT); - } - - static void bcm47xx_wdt_start(void) - { - bcm47xx_wdt_pet(); -- bcm47xx_timer_tick(0); --} -- --static void bcm47xx_wdt_pause(void) --{ -- del_timer_sync(&wdt_timer); -- bcm47xx_wdt_hw_stop(); -+ if(needs_sw_scale) -+ bcm47xx_timer_tick(0); - } - - static void bcm47xx_wdt_stop(void) - { -- bcm47xx_wdt_pause(); -+ if(needs_sw_scale) -+ del_timer_sync(&wdt_timer); -+ bcm47xx_wdt_hw_stop(); - } - - static int bcm47xx_wdt_settimeout(int new_time) -@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void) - if (bcm47xx_wdt_hw_stop() < 0) - return -ENODEV; - -- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L); -+ /* FIXME Other cores */ -+#ifdef BCM47XX_BUS_TYPE_BCMA -+ if(bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA && -+ bcm47xx_bus.ssb.chip_id == 0x5354) { -+ /* Slow WDT clock, no pre-scaling */ -+ needs_sw_scale = 0; -+ } else { -+#endif -+ /* Fast WDT clock, needs software pre-scaling */ -+ needs_sw_scale = 1; -+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L); -+#ifdef BCM47XX_BUS_TYPE_BCMA -+ } -+#endif - - if (bcm47xx_wdt_settimeout(wdt_time)) { - bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME); diff --git a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch deleted file mode 100644 index 5d96b0b191..0000000000 --- a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch +++ /dev/null @@ -1,138 +0,0 @@ ---- a/arch/mips/include/asm/r4kcache.h -+++ b/arch/mips/include/asm/r4kcache.h -@@ -20,10 +20,28 @@ - #ifdef CONFIG_BCM47XX - #include - #include --#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE))) -+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg() -+ -+static inline unsigned long bcm4710_dummy_rreg(void) -+{ -+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)); -+} -+ -+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr)) -+ -+static inline unsigned long bcm4710_fill_tlb(void *addr) -+{ -+ return *(unsigned long *)addr; -+} -+ -+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr)) -+ -+static inline void bcm4710_protected_fill_tlb(void *addr) -+{ -+ unsigned long x; -+ get_dbe(x, (unsigned long *)addr);; -+} - --#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) --#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) - #else - #define BCM4710_DUMMY_RREG() - ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -835,6 +835,9 @@ build_get_pgde32(u32 **p, unsigned int t - #endif - uasm_i_addu(p, ptr, tmp, ptr); - #else -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - UASM_i_LA_mostly(p, ptr, pgdc); - #endif - uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ -@@ -1188,12 +1191,12 @@ static void __cpuinit build_r4000_tlb_re - /* No need for uasm_i_nop */ - } - --#ifdef CONFIG_BCM47XX -- uasm_i_nop(&p); --#endif - #ifdef CONFIG_64BIT - build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ - #else -+# ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+# endif - build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ - #endif - -@@ -1205,6 +1208,9 @@ static void __cpuinit build_r4000_tlb_re - build_update_entries(&p, K0, K1); - build_tlb_write_entry(&p, &l, &r, tlb_random); - uasm_l_leave(&l, p); -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+#endif - uasm_i_eret(&p); /* return from trap */ - } - #ifdef CONFIG_HUGETLB_PAGE -@@ -1710,12 +1716,12 @@ build_r4000_tlbchange_handler_head(u32 * - struct uasm_reloc **r, unsigned int pte, - unsigned int ptr) - { --#ifdef CONFIG_BCM47XX -- uasm_i_nop(p); --#endif - #ifdef CONFIG_64BIT - build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ - #else -+# ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+# endif - build_get_pgde32(p, pte, ptr); /* get pgd in ptr */ - #endif - -@@ -1752,6 +1758,9 @@ build_r4000_tlbchange_handler_tail(u32 * - build_update_entries(p, tmp, ptr); - build_tlb_write_entry(p, l, r, tlb_indexed); - uasm_l_leave(l, *p); -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - uasm_i_eret(p); /* return from trap */ - - #ifdef CONFIG_64BIT ---- a/arch/mips/kernel/genex.S -+++ b/arch/mips/kernel/genex.S -@@ -22,6 +22,19 @@ - #include - #include - -+#ifdef CONFIG_BCM47XX -+# ifdef eret -+# undef eret -+# endif -+# define eret \ -+ .set push; \ -+ .set noreorder; \ -+ nop; \ -+ nop; \ -+ eret; \ -+ .set pop; -+#endif -+ - #define PANIC_PIC(msg) \ - .set push; \ - .set reorder; \ -@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp) - .set noat - #ifdef CONFIG_BCM47XX - nop -- nop - #endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX -@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp) - .set push - .set mips3 - .set noat -+#ifdef CONFIG_BCM47XX -+ nop -+#endif - mfc0 k1, CP0_CAUSE - li k0, 31<<2 - andi k1, k1, 0x7c diff --git a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch deleted file mode 100644 index c65958eda8..0000000000 --- a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/drivers/pcmcia/yenta_socket.c -+++ b/drivers/pcmcia/yenta_socket.c -@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru - * Probe for usable interrupts using the force - * register to generate bogus card status events. - */ -+#ifndef CONFIG_BCM47XX -+ /* WRT54G3G does not like this */ - cb_writel(socket, CB_SOCKET_EVENT, -1); - cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); - reg = exca_readb(socket, I365_CSCINT); -@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru - } - cb_writel(socket, CB_SOCKET_MASK, 0); - exca_writeb(socket, I365_CSCINT, reg); -+#endif - - mask = probe_irq_mask(val) & 0xffff; - -@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie - else - socket->socket.irq_mask = 0; - -+ /* irq mask probing is broken for the WRT54G3G */ -+ if (socket->socket.irq_mask == 0) -+ socket->socket.irq_mask = 0x6f8; -+ - dev_printk(KERN_INFO, &socket->dev->dev, - "ISA IRQ mask 0x%04x, PCI irq %d\n", - socket->socket.irq_mask, socket->cb_irq); -@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct - dev_printk(KERN_INFO, &dev->dev, - "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE)); - -+ /* Generate an interrupt on card insert/remove */ -+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK); -+ -+ /* Set up Multifunction Routing Status Register */ -+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */); -+ -+ /* Switch interrupts to parallelized */ -+ config_writeb(socket, 0x92, 0x64); -+ - yenta_fixup_parent_bridge(dev->subordinate); - - /* Register it with the pcmcia layer.. */ diff --git a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch deleted file mode 100644 index 0650c25683..0000000000 --- a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -375,7 +375,7 @@ static void __devinit ssb_pcicore_init_h - set_io_port_base(ssb_pcicore_controller.io_map_base); - /* Give some time to the PCI controller to configure itself with the new - * values. Not waiting at this point causes crashes of the machine. */ -- mdelay(10); -+ mdelay(300); - register_pci_controller(&ssb_pcicore_controller); - } - diff --git a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch deleted file mode 100644 index 019b9932bd..0000000000 --- a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -277,6 +277,10 @@ static int bcm47xx_get_invariants(struct - if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) - iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); - -+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */ -+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot) -+ iv->has_cardbus_slot = 0; -+ - return 0; - } - diff --git a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch deleted file mode 100644 index b3aa126753..0000000000 --- a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -22,7 +22,8 @@ - #include - #include - --static char nvram_buf[NVRAM_SPACE]; -+char nvram_buf[NVRAM_SPACE]; -+EXPORT_SYMBOL(nvram_buf); - static int cfe_env; - extern char *cfe_env_get(char *nv_buf, const char *name); - ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ -