From: Christian Lamparter Date: Sun, 13 Feb 2022 11:46:37 +0000 (+0100) Subject: mpc85xx: change legacy "eeprom" compatible X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c7528996a5208ed94eb2e6dc82079542a7869ab3;p=openwrt%2Fstaging%2Flynxis.git mpc85xx: change legacy "eeprom" compatible silences the following message: > eeprom 0-0051: eeprom driver is deprecated, please use at24 instead The chip was likely a Dallas Semiconductor and later MAXIM part before Analog Devices, Inc. bought MAXIM. From the datasheet: "The DS28CN01 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the FIPS 180-1/180-2 and ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1)." ... "Write Access Requires Knowledge of the Secret and the Capability of Computing and Transmitting a 160-Bit MAC as Authorization" OpenWrt doesn't use it. There's no in-kernel driver from what I know. Let's document that the chip is at the location. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts index 67b93707c7..166342759c 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts @@ -183,10 +183,14 @@ #endif }; - /* Most likely SoC boot config */ eeprom@51 { - compatible = "eeprom"; + /* + * 1Kbit I2C/SMBus EEPROM with SHA-1 Engine + * Aerohive calls it "dallas". + */ + compatible = "adi,ds28cn01"; reg = <0x51>; + read-only; }; };