From: Rafał Miłecki Date: Fri, 8 Jul 2016 16:17:53 +0000 (+0200) Subject: mac80211: backport brcmfmac changes from 2016-07-08 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c729fe02694a583d38ef6636837fce4b4b6fa8e8;p=openwrt%2Fstaging%2Fblocktrron.git mac80211: backport brcmfmac changes from 2016-07-08 To work correctly hostapd requires wireless driver to allow interfaces removal. It was working with brcmfmac only partially. Firmware for BCM43602 got some special hack (feature?) that allowed removing all interfaces by disabling mbss mode. It wasn't working with BCM4366 firmware and remaining interfaces were preventing hostapd from starting again. Those patches add support for "interface_remove" firmware method which works with BCM4366 firmware and they make it finally possible to use BCM4366 & brcmfmac & multiple interfaces. Signed-off-by: Rafał Miłecki --- diff --git a/package/kernel/mac80211/patches/319-0005-brcmfmac-delete-interface-directly-in-code-that-sent.patch b/package/kernel/mac80211/patches/319-0005-brcmfmac-delete-interface-directly-in-code-that-sent.patch new file mode 100644 index 0000000000..12d7eb4887 --- /dev/null +++ b/package/kernel/mac80211/patches/319-0005-brcmfmac-delete-interface-directly-in-code-that-sent.patch @@ -0,0 +1,75 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 29 Jun 2016 21:54:26 +0200 +Subject: [PATCH] brcmfmac: delete interface directly in code that sent fw + request +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +So far when receiving event about in-firmware-interface removal our +event worker was notifying listener and afterwards it was removing Linux +interface. + +First of all it was resulting in slightly unexpected order. The listener +(del_virtual_intf callback) was (usually) returning with success before +we even called unregister_netdev(ice). + +Please note this couldn't be simply fixed by changing order of calls in +brcmf_fweh_handle_if_event as unregistering interface earlier could free +struct brcmf_if. + +Another problem of current implementation are possible lockups. Focus on +the time slot between calling event handler and removing Linux +interface. During that time original caller may leave (unlocking rtnl +semaphore) *and* another call to the same code may be done (locking it +again). If that happens our event handler will stuck at removing Linux +interface, it won't handle another event and will block process holding +rtnl lock. + +This can be simply solved by unregistering interface in a proper +callback, right after receiving confirmation event from firmware. This +only required modifying worker to don't unregister on its own if there +is someone waiting for the event. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Kalle Valo +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c +@@ -18,6 +18,7 @@ + #include "brcmu_wifi.h" + #include "brcmu_utils.h" + ++#include "cfg80211.h" + #include "core.h" + #include "debug.h" + #include "tracepoint.h" +@@ -182,8 +183,13 @@ static void brcmf_fweh_handle_if_event(s + + err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); + +- if (ifp && ifevent->action == BRCMF_E_IF_DEL) +- brcmf_remove_interface(ifp, false); ++ if (ifp && ifevent->action == BRCMF_E_IF_DEL) { ++ bool armed = brcmf_cfg80211_vif_event_armed(drvr->config); ++ ++ /* Default handling in case no-one waits for this event */ ++ if (!armed) ++ brcmf_remove_interface(ifp, false); ++ } + } + + /** +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +@@ -2290,8 +2290,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph + else + err = 0; + } +- if (err) +- brcmf_remove_interface(vif->ifp, true); ++ brcmf_remove_interface(vif->ifp, true); + + brcmf_cfg80211_arm_vif_event(cfg, NULL); + if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) diff --git a/package/kernel/mac80211/patches/319-0006-brcmfmac-support-removing-AP-interfaces-with-interfa.patch b/package/kernel/mac80211/patches/319-0006-brcmfmac-support-removing-AP-interfaces-with-interfa.patch new file mode 100644 index 0000000000..2f7165eade --- /dev/null +++ b/package/kernel/mac80211/patches/319-0006-brcmfmac-support-removing-AP-interfaces-with-interfa.patch @@ -0,0 +1,84 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 29 Jun 2016 21:54:27 +0200 +Subject: [PATCH] brcmfmac: support removing AP interfaces with + "interface_remove" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +New firmwares (e.g. 10.10.69.36 for BCM4366) support "interface_remove" +for removing interfaces. Try to use this method on cfg80211 request. In +case of older firmwares (e.g. 7.35.177.56 for BCM43602 as I tested) this +will just result in firmware rejecting command and this won't change any +behavior. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Kalle Valo +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -785,12 +785,48 @@ s32 brcmf_notify_escan_complete(struct b + return err; + } + ++static int brcmf_cfg80211_del_ap_iface(struct wiphy *wiphy, ++ struct wireless_dev *wdev) ++{ ++ struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); ++ struct net_device *ndev = wdev->netdev; ++ struct brcmf_if *ifp = netdev_priv(ndev); ++ int ret; ++ int err; ++ ++ brcmf_cfg80211_arm_vif_event(cfg, ifp->vif); ++ ++ err = brcmf_fil_bsscfg_data_set(ifp, "interface_remove", NULL, 0); ++ if (err) { ++ brcmf_err("interface_remove failed %d\n", err); ++ goto err_unarm; ++ } ++ ++ /* wait for firmware event */ ++ ret = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL, ++ BRCMF_VIF_EVENT_TIMEOUT); ++ if (!ret) { ++ brcmf_err("timeout occurred\n"); ++ err = -EIO; ++ goto err_unarm; ++ } ++ ++ brcmf_remove_interface(ifp, true); ++ ++err_unarm: ++ brcmf_cfg80211_arm_vif_event(cfg, NULL); ++ return err; ++} ++ + static + int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) + { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct net_device *ndev = wdev->netdev; + ++ if (ndev && ndev == cfg_to_ndev(cfg)) ++ return -ENOTSUPP; ++ + /* vif event pending in firmware */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; +@@ -807,12 +843,13 @@ int brcmf_cfg80211_del_iface(struct wiph + switch (wdev->iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_STATION: +- case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return -EOPNOTSUPP; ++ case NL80211_IFTYPE_AP: ++ return brcmf_cfg80211_del_ap_iface(wiphy, wdev); + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_P2P_DEVICE: diff --git a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch index 0bfaae6a1b..ae571c99ab 100644 --- a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch +++ b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch @@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -1208,6 +1208,7 @@ int __init brcmf_core_init(void) +@@ -1213,6 +1213,7 @@ int __init brcmf_core_init(void) { if (!schedule_work(&brcmf_driver_work)) return -EBUSY; diff --git a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch index 104438a951..f301fe1e4e 100644 --- a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch +++ b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch @@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -2746,6 +2746,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip +@@ -2783,6 +2783,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip * preference in cfg struct to apply this to * FW later while initializing the dongle */