From: Davide Fioravanti Date: Wed, 21 Jun 2023 19:53:07 +0000 (+0200) Subject: ramips: fix lan leds for Wavlink WL-WN535K1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c71dada92654a53c63bbc5bebcc40fe924750ed7;p=openwrt%2Fstaging%2Fblocktrron.git ramips: fix lan leds for Wavlink WL-WN535K1 Previously both lan1 and lan2 leds were wrongly labelled as lan2. Moreover they were connected to the wrong lan port. Fixes 8fde82095ba0 ("ramips: add support for Wavlink WL-WN535K1") Reported-by: Nicolò Maria Semprini Signed-off-by: Davide Fioravanti --- diff --git a/target/linux/ramips/dts/mt7620a_wavlink_wl-wn535k1.dts b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn535k1.dts index 67a7d8d488..bbb3e01add 100644 --- a/target/linux/ramips/dts/mt7620a_wavlink_wl-wn535k1.dts +++ b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn535k1.dts @@ -48,12 +48,12 @@ lan1 { label = "green:lan1"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; wan { diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 2deda0861a..6a097ab8e3 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -219,8 +219,8 @@ tplink,re200-v1) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; wavlink,wl-wn535k1) - ucidef_set_led_switch "lan1" "lan2" "green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x20" + ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x20" + ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x04" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10" ;; wavlink,wl-wn579x3) diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 787e123e31..e571dc1f6f 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -235,7 +235,7 @@ ramips_setup_interfaces() ;; wavlink,wl-wn535k1) ucidef_add_switch "switch0" \ - "2:lan" "5:lan" "4:wan" "6@eth0" + "2:lan:2" "5:lan:1" "4:wan" "6@eth0" ;; wavlink,wl-wn579x3) ucidef_add_switch "switch0" \