From: Tomasz Figa Date: Thu, 8 Jan 2015 06:51:07 +0000 (+0100) Subject: ARM: 8260/1: l2c: Add interface to ask hypervisor to configure L2C X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c6d1a2d0078a30eb6290428a858c4e790a0e8691;p=openwrt%2Fstaging%2Fblogic.git ARM: 8260/1: l2c: Add interface to ask hypervisor to configure L2C Because certain secure hypervisor do not allow writes to individual L2C registers, but rather expect set of parameters to be passed as argument to secure monitor calls, there is a need to provide an interface for the L2C driver to ask the firmware to configure the hardware according to specified parameters. This patch adds such. Signed-off-by: Tomasz Figa Signed-off-by: Marek Szyprowski Tested-by: Nishanth Menon Acked-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Russell King --- diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 891a56b35bcf..563b92fc2f41 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -23,6 +23,8 @@ #include +struct l2x0_regs; + struct outer_cache_fns { void (*inv_range)(unsigned long, unsigned long); void (*clean_range)(unsigned long, unsigned long); @@ -36,6 +38,7 @@ struct outer_cache_fns { /* This is an ARM L2C thing */ void (*write_sec)(unsigned long, unsigned); + void (*configure)(const struct l2x0_regs *); }; extern struct outer_cache_fns outer_cache; diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index dde0d54ac41e..5288153f28b8 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -110,6 +110,11 @@ static inline void l2c_unlock(void __iomem *base, unsigned num) static void l2c_configure(void __iomem *base) { + if (outer_cache.configure) { + outer_cache.configure(&l2x0_saved_regs); + return; + } + if (l2x0_data->configure) l2x0_data->configure(base); @@ -910,6 +915,7 @@ static int __init __l2c_init(const struct l2c_init_data *data, fns = data->outer_cache; fns.write_sec = outer_cache.write_sec; + fns.configure = outer_cache.configure; if (data->fixup) data->fixup(l2x0_base, cache_id, &fns);