From: Adrian Schmutzler Date: Sun, 15 Dec 2019 23:21:33 +0000 (+0100) Subject: lantiq: use soc_vendor_device scheme on DTS file X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c640370939d725238aa6200423eb8aabf59ef23e;p=openwrt%2Fstaging%2Fmans0n.git lantiq: use soc_vendor_device scheme on DTS file This renames lantiq DTS(I) files to follow soc_vendor_device scheme. This will make DTS files easier to maintain. As a side effect, DTS file name can be derived from device node names now, only having to specify a SOC variable in Makefiles. While at it, move files to arch/mips/boot/dts/lantiq subfolder. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts deleted file mode 100644 index 67b0f9631f..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts +++ /dev/null @@ -1,112 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -/ { - compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube"; - model = "AudioCodes MediaPack MP-252"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "uboot_env"; - reg = <0x20000 0x20000>; - }; - - partition@40000 { - label = "boardconfig"; - reg = <0x40000 0x60000>; - read-only; - }; - - partition@a0000 { - label = "firmware"; - reg = <0xa0000 0xf20000>; - }; - - partition@fc0000 { - label = "sysconfig"; - reg = <0xfc0000 0x40000>; - }; - - partition@1000000 { - label = "rootfs_data"; - reg = <0x1000000 0x1000000>; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ALL0333CJ.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ALL0333CJ.dts deleted file mode 100644 index c5dd1600f4..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ALL0333CJ.dts +++ /dev/null @@ -1,111 +0,0 @@ -/dts-v1/; - -#include "amazonse.dtsi" - -/ { - compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase"; - model = "Allnet ALL0333CJ DSL Modem"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &online_green; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x1000000>; - }; - - leds { - compatible = "gpio-leds"; - - /* power led: red=off, green=on */ - power: power { - label = "all0333cj:green:power"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - lan: lan { - label = "all0333cj:green:lan"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - dsl: dsl { - label = "all0333cj:green:dsl"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - - online_green: online { - label = "all0333cj:green:online"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - online_red { - label = "all0333cj:red:online"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - keys_in { - lantiq,pins = "io0",/* "io25", */"io29"; - lantiq,pull = <2>; - lantiq,open-drain = <1>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x400000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "firmware"; - reg = <0x10000 0x3ef200>; - }; - - partition@3ff200 { - label = "uboot_env"; - reg = <0x3ff200 0xc00>; - read-only; - }; - - partition@3ffe00 { - label = "dummy_bits"; - reg = <0x3ffe00 0x200>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4510PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4510PW.dts deleted file mode 100644 index 19a44d5f6d..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4510PW.dts +++ /dev/null @@ -1,214 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube"; - model = "Wippies, Elisa"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power2; - led-running = &power; - led-upgrade = &power; - - led-dsl = &adsl; - led-internet = &internet; - led-usb = &led_usb; - led-usb2 = &led_usb2; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "power"; - gpios = <&gpios 21 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - power2: power2 { - label = "power2"; - gpios = <&gpios 20 GPIO_ACTIVE_HIGH>; - }; - lan1 { - label = "lan1"; - gpios = <&gpios 19 GPIO_ACTIVE_HIGH>; - }; - lan2 { - label = "lan2"; - gpios = <&gpios 18 GPIO_ACTIVE_HIGH>; - }; - lan3 { - label = "lan3"; - gpios = <&gpios 17 GPIO_ACTIVE_HIGH>; - }; - lan4 { - label = "lan4"; - gpios = <&gpios 16 GPIO_ACTIVE_HIGH>; - }; - wifi: wifi { - label = "wifi"; - gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; - }; - adsl: adsl { - label = "adsl"; - gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; - }; - internet: internet { - label = "internet"; - gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; - }; - internet2 { - label = "internet2"; - gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; - }; - voip { - label = "voip"; - gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; - }; - phone { - label = "phone"; - gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; - }; - phone2 { - label = "phone2"; - gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; - }; - led_usb: usb { - label = "usb"; - gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; - }; - led_usb2: usb2 { - label = "usb2"; - gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; - }; - usb3 { - label = "usb3"; - gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; - }; - unlabeled { - label = "unlabeled"; - gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu a23"; - lantiq,function = "ebu"; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - exin { - lantiq,groups = "exin1", "exin2"; - lantiq,function = "exin"; - lantiq,output = <0>; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - buttons { - lantiq,pins = "io3", "io14"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - }; -}; - -&gpios { - status = "okay"; - lantiq,groups = <0x7>; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - lantiq,noxip; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "firmware"; - reg = <0x60000 0xfa0000>; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, - <&pci_req1_pins>, <&pci_req2_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - interrupt-map = < - 0x6000 0 0 1 &icu0 135 - 0x7800 0 0 1 &icu0 66 - 0x7800 0 0 2 &icu0 66 - 0x7800 0 0 3 &icu0 66 - >; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x7>; -}; - -&vmmc { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dts deleted file mode 100644 index 34f868f484..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dts +++ /dev/null @@ -1,8 +0,0 @@ -/dts-v1/; - -#include "ARV4518PWR01.dtsi" - -/ { - compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube"; - model = "SMC7908A-ISP"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dtsi deleted file mode 100644 index dcae06d894..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01.dtsi +++ /dev/null @@ -1,200 +0,0 @@ -#include "danube.dtsi" - -#include - -/ { - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &online; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - ath5k_eep { - compatible = "ath5k,eeprom"; - ath,eep-flash = <&boardconfig 0x400>; - ath,mac-offset = <0x16>; - ath,mac-increment = <1>; - ath,eep-swap; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "power"; - gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - dsl: dsl { - label = "dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - online: online { - label = "online"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "wifi"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - wps { - label = "wps"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - dsl2 { - label = "dsl2"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "usb"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - voice { - label = "voice"; - gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "fxs1"; - gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "fxs2"; - gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "fxo"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; /* 64 KB */ - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; /* 64 KB */ - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - boardconfig: partition@400000 { - label = "boardconfig"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x0>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, - <&pci_req1_pins>, <&pci_req2_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0xf>; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01A.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01A.dts deleted file mode 100644 index 9617398bbc..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4518PWR01A.dts +++ /dev/null @@ -1,12 +0,0 @@ -/dts-v1/; - -#include "ARV4518PWR01.dtsi" - -/ { - compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube"; - model = "SMC7908A-ISP, Airties WAV-221"; -}; - -&pci0 { - lantiq,external-clock; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4519PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4519PW.dts deleted file mode 100644 index 8e5301ddc9..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4519PW.dts +++ /dev/null @@ -1,205 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube"; - model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &internet_green; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power { - label = "arv4519pw:green:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power2 { - label = "arv4519pw:red:power"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv4519pw:green:wlan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "arv4519pw:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet_green: online { - label = "arv4519pw:green:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - online2 { - label = "arv4519pw:red:internet"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "arv4519pw:green:usb"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - voip { - label = "arv4519pw:green:voip"; - gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "arv4519pw:green:phone1"; - gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv4519pw:green:phone2"; - gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "arv4519pw:green:line"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - wps2 { - label = "arv4519pw:green:wps"; - gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; - }; - wps { - label = "arv4519pw:orange:wps"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - wps3 { - label = "arv4519pw:red:wps"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - boardconfig: partition@3f0000 { - label = "boardconfig"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x400>; - }; -}; - -&pci0 { - status = "okay"; - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0xf>; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4520PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4520PW.dts deleted file mode 100644 index b59477cb19..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4520PW.dts +++ /dev/null @@ -1,222 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube"; - model = "Easybox 800, WAV-281"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_blue; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &dsl; - led-internet = &internet_blue; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "wps"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_blue: power { - label = "arv4520pw:blue:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl: dsl { - label = "arv4520pw:blue:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet_blue: internet { - label = "arv4520pw:blue:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - power_red: power2 { - label = "arv4520pw:red:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - wps { - label = "arv4520pw:yellow:wps"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - wps2 { - label = "arv4520pw:red:wps"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - /* - wps green is missing - */ - fxs1 { - label = "arv4520pw:blue:telefon1"; - gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv4520pw:blue:telefon2"; - gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; - }; - isdn { - label = "arv4520pw:blue:isdn"; - gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "arv4520pw:blue:line"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - voice { - label = "arv4520pw:blue:sprache"; - gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "arv4520pw:blue:usb"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv4520pw:blue:wifi"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - internet2 { - label = "arv4520pw:red:internet"; - gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; - }; - /* - info is missing - */ - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 28 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - }; -}; - -&gsw { - /* gpiomm 10 - switch */ - phy-mode = "rmii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x20000>; - read-only; - }; - - partition@20000 { - label = "uboot_env"; - reg = <0x20000 0x10000>; - read-only; - }; - - partition@30000 { - label = "firmware"; - reg = <0x30000 0x3c0000>; - }; - - boardconfig: partition@7f0000 { - label = "boardconfig"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x400>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH - &gpiomm 7 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4525PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4525PW.dts deleted file mode 100644 index cceb42164e..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4525PW.dts +++ /dev/null @@ -1,151 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube"; - model = "Speedport W501V Typ A"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - /* we dont have a power led, lets use the online led */ - led-boot = &online; - led-failsafe = &online; - - led-dsl = &dsl; - led-internet = &online; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - ath5k_eep { - compatible = "ath5k,eeprom"; - ath,eep-flash = <&boardconfig 0x400>; - ath,mac-offset = <0x0>; - ath,eep-swap; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - fxo { - label = "arv4525pw:green:festnetz"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - fxs { - label = "arv4525pw:green:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "arv4525pw:green:t-dsl"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv4525pw:green:wlan"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - online: online { - label = "arv4525pw:green:online"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - relay { - lantiq,pins = "io31"; - lantiq,output = <1>; - }; - }; -}; - -/* #define ARV4525PW_PHYRESET 13 */ -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - boardconfig: partition@400000 { - label = "boardconfig"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -/* #define ARV4525PW_RELAY 31 */ -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV452CQW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV452CQW.dts deleted file mode 100644 index eecff4bb0b..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV452CQW.dts +++ /dev/null @@ -1,240 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube"; - model = "Arcor 801"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_blue; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &dsl_blue; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - ath5k_eep { - compatible = "ath5k,eeprom"; - ath,eep-flash = <&boardconfig 0x400>; - ath,mac-offset = <0x0>; - ath,eep-swap; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power_blue: power0 { - label = "arv452cqw:blue:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl_blue: dsl { - label = "arv452cqw:blue:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - isdn { - label = "arv452cqw:blue:isdn"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - power_red: power1 { - label = "arv452cqw:red:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - wps { - label = "arv452cqw:blue:wps"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - wps1 { - label = "arv452cqw:yellow:wps"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "arv452cqw:blue:telefon1"; - gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv452cqw:blue:telefon2"; - gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; - }; - wps2 { - label = "arv452cqw:red:wps"; - gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "arv452cqw:blue:line"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - voice { - label = "arv452cqw:blue:sprache"; - gpios = <&gpiomm 4 1>; - }; - led_usb: usb { - label = "arv452cqw:blue:usb"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv452cqw:blue:wlan"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - /* - internet blue and internet red are missing - dsl2 and dsl3 are not referenced in manual - */ - dsl2 { - label = "arv452cqw:yellow:dsl"; - gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; - }; - dsl3 { - label = "arv452cqw:red:dsl"; - gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 28 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - leds { - lantiq,pins = "io3", "io5", "io6", "io7", "io9"; - lantiq,output = <1>; - }; - }; -}; - -/* -#define ARV452CPW_SWITCH_RESET 110 -*/ -&gsw { - phy-mode = "rmii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x400000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - boardconfig: partition@3f0000 { - label = "boardconfig"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x77f>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH - &gpiomm 7 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7506PW11.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7506PW11.dts deleted file mode 100644 index 9e4216033b..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7506PW11.dts +++ /dev/null @@ -1,162 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube"; - model = "Alice/O2 IAD 4421"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power_red; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &internet; - led-wifi = &wlan; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - wlan: wlan { - label = "arv7506pw11:green:wlan"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - power: power { - label = "arv7506pw11:green:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl: dsl { - label = "arv7506pw11:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet: internet { - label = "arv7506pw11:green:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - power_red: power_red { - label = "arv7506pw11:red:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - internet_red { - label = "arv7506pw11:red:internet"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - info { - label = "arv7506pw11:green:info"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - telefon { - label = "arv7506pw11:green:telefon"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - info_red { - label = "arv7506pw11:red:info"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - }; -}; - -/* GPIO 19: switch reset */ -&gsw { - phy-mode = "rmii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0x7a0000>; - }; - - boardconfig: partition@7f0000 { - label = "board_config"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@1814,3592 { - compatible = "pci1814,3592"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts deleted file mode 100644 index e5fd05fe40..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts +++ /dev/null @@ -1,198 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube"; - model = "Astoria Networks ARV7510PW22"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &internet; - led-usb = &umts; - led-wifi = &wlan; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - restart { - label = "restart"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - internet: internet { - label = "internet"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - wlan: wlan { - label = "wlan"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - umts: 3g { - label = "3g"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - message { - label = "message"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - pins_out { - lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20"; - lantiq,output = <1>; - }; - pins_in { - lantiq,pins = "io11", "io12", "io28"; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gsw { - /* Switch reset 19 */ - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "firmware"; - reg = <0x60000 0xf80000>; - }; - - boardconfig: partition@fe0000 { - label = "board_config"; - reg = <0xfe0000 0x20000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - interrupt-map = < - 0x7000 0 0 1 &icu0 30 - 0x7800 0 0 1 &icu0 135 - 0x7800 0 0 2 &icu0 135 - 0x7800 0 0 3 &icu0 135 - >; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x3>; - - wifi@1814,3592 { - compatible = "pci1814,3592"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts deleted file mode 100644 index ae0d27a042..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts +++ /dev/null @@ -1,233 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube"; - model = "Astoria Networks ARV7518PW"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &online_green; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power_green: power { - label = "arv7518pw:green:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl: dsl { - label = "arv7518pw:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - online_green: online { - label = "arv7518pw:green:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv7518pw:green:wlan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - power_red: power2 { - label = "arv7518pw:red:power"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - online2 { - label = "arv7518pw:red:internet"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "arv7518pw:green:usb"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - voice { - label = "arv7518pw:green:voip"; - gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "arv7518pw:green:phone1"; - gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv7518pw:green:phone2"; - gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; - }; - unlabeled { - label = "arv7518pw:amber:unlabeled"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - wps { - label = "arv7518pw:amber:wps"; - gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; - }; - wps2 { - label = "arv7518pw:green:wps"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - wps3 { - label = "arv7518pw:red:wps"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - leds { - lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19"; - lantiq,output = <1>; - }; - keys { - lantiq,pins = "io28", "io30"; - lantiq,output = <0>; - lantiq,pull = <2>; - lantiq,open-drain = <1>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -/* -#define SWITCH_RESET 13 -*/ -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x7d0000>; - }; - - boardconfig: partition@400000 { - label = "boardconfig"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x0>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - lantiq,external-clock; - req-mask = <0xf>; - - wifi@168c,0029 { - compatible = "pci168c,0029"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519PW.dts deleted file mode 100644 index 34b541af92..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519PW.dts +++ /dev/null @@ -1,217 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube"; - model = "Astoria Networks ARV7519PW"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power2; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &online; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power2: power2 { - label = "power2"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - online: online { - label = "online"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - online2 { - label = "online2"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "wifi"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - wifi2 { - label = "wifi2"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - wifi3 { - label = "wifi3"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - voice { - label = "voice"; - gpios = <&gpio 31 GPIO_ACTIVE_LOW>; - }; - wps { - label = "wps"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - wps2 { - label = "wps2"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - }; - wps3 { - label = "wps3"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - lan { - label = "lan"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - tv { - label = "tv"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - upgrade { - label = "upgrade"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - }; - }; - - /* is there another way to "reserve" the GPIO? */ - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - switch { - gpio-export,name = "switch"; - gpio-export,output = <1>; - gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - switch_rst { - lantiq,pins = "io19"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - }; - - partition@60000 { - label = "firmware"; - reg = <0x60000 0xf80000>; - }; - - boardconfig: partition@fe0000 { - label = "board_config"; - reg = <0xfe0000 0x20000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0xf>; - - wifi@0,0 { - compatible = "pci0,0"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - }; -}; - -&usb_phy { - status = "okay"; -}; - -/* warning: passive port only works with active devices */ -&usb { - status = "okay"; -}; - -&vmmc { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519RW22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519RW22.dts deleted file mode 100644 index d6c521cfe7..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7519RW22.dts +++ /dev/null @@ -1,246 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9"; - model = "Orange Livebox 2.1"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_green; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &internet_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 33 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - lan_green { - label = "arv7519rw22:green:lan"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - internet_red { - label = "arv7519rw22:red:internet"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - power_green: power_green { - label = "arv7519rw22:green:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - alarm_blue { - label = "arv7519rw22:blue:alarm"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - internet_orange { - label = "arv7519rw22:orange:internet"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - internet_green: internet_green { - label = "arv7519rw22:green:internet"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - }; - voice_green { - label = "arv7519rw22:green:voice"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 32 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pcie-rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x60000>; - read-only; - }; - - partition@60000 { - label = "uboot-env"; - reg = <0x60000 0x20000>; - read-only; - }; - - partition@80000 { - label = "firmware"; - reg = <0x80000 0x1f00000>; - }; - - boardconfig: partition@1f80000 { - label = "boardconfig"; - reg = <0x1f80000 0x80000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7525PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7525PW.dts deleted file mode 100644 index d673c9b204..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7525PW.dts +++ /dev/null @@ -1,149 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube"; - model = "Speedport W303V Typ A"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &power_green; - led-internet = &online; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power_green: power { - label = "arv7525pw:green:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power1 { - label = "arv7525pw:red:power"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - online: online { - label = "arv7525pw:green:online"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - voice { - label = "arv7525pw:green:telefonie"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - voice2 { - label = "arv7525pw:red:telefonie"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv7525pw:green:wlan"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - boardconfig: partition@400000 { - label = "board_config"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - interrupt-map = <0x7000 0 0 1 &icu0 135 1>; - - wifi@0,0 { - compatible = "pci0,0"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - }; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW.dts deleted file mode 100644 index 069b1b1ed6..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW.dts +++ /dev/null @@ -1,240 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube"; - model = "Arcor 802"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_red; - led-failsafe = &power_blue; - led-running = &power_red; - led-upgrade = &power_red; - - led-dsl = &internet_red; - led-usb = &umts; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - restart { - label = "restart"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - dsl { - label = "dsl"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power_blue: power1 { - label = "arv752dpw:blue:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - internet_red: internet { - label = "arv752dpw:red:internet"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - message { - label = "arv752dpw:red:message"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - power_red: power { - label = "arv752dpw:red:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - voice1 { - label = "arv752dpw:red:voice"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - umts: umts { - label = "arv752dpw:red:umts"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv752dpw:red:wifi"; - gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "arv752dpw:green:tae-n"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv752dpw:green:tae-u"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "arv752dpw:green:isdn"; - gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; - }; - internet2 { - label = "arv752dpw:blue:internet"; - gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; - }; - voice2 { - label = "arv752dpw:blue:voice"; - gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - leds { - lantiq,pins = "io3", "io5", "io6", "io8"; - lantiq,output = <1>; - lantiq,pull = <0>; - }; - keys { - lantiq,pins = "io11", "io12", "io13", "io28"; - lantiq,output = <0>; - lantiq,pull = <2>; - lantiq,open-drain = <1>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gsw { - phy-mode = "rmii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x7d0000>; - }; - - boardconfig: partition@7f0000 { - label = "board_config"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x3>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - interrupt-map = <0x7000 0 0 1 &icu0 135>; - req-mask = <0x3>; - - wifi@1814,0601 { - compatible = "pci1814,0601"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW22.dts deleted file mode 100644 index ec90a2bef9..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW22.dts +++ /dev/null @@ -1,261 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube"; - model = "Arcor 803"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_red; - led-failsafe = &power_blue; - led-running = &power_red; - led-upgrade = &power_red; - - led-dsl = &internet_red; - led-usb = &umts; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - restart { - label = "restart"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - dsl { - label = "dsl"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power_blue: power1 { - label = "arv752dpw22:blue:power"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - internet_red: internet { - label = "arv752dpw22:red:internet"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - message { - label = "arv752dpw22:red:message"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - power_red: power { - label = "arv752dpw22:red:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - voice1 { - label = "arv752dpw22:red:voice"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - umts: umts { - label = "arv752dpw22:red:umts"; - gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "arv752dpw22:red:wifi"; - gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; - }; - fxs1 { - label = "arv752dpw22:green:tae-n"; - gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; - }; - fxs2 { - label = "arv752dpw22:green:tae-u"; - gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; - }; - fxo { - label = "arv752dpw22:green:isdn"; - gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; - }; - internet2 { - label = "arv752dpw22:blue:internet"; - gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; - }; - voice2 { - label = "arv752dpw22:blue:voice"; - gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; - }; - eth1 { - label = "arv752dpw22:green:lan1"; - gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>; - }; - eth2 { - label = "arv752dpw22:green:lan2"; - gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>; - }; - eth3 { - label = "arv752dpw22:green:lan3"; - gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>; - }; - eth4 { - label = "arv752dpw22:green:lan4"; - gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ebu { - lantiq,groups = "ebu cs1"; - lantiq,function = "ebu"; - }; - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,open-drain = <1>; - lantiq,output = <1>; - }; - leds { - lantiq,pins = "io3", "io5", "io6", "io8"; - lantiq,open-drain = <1>; - lantiq,output = <1>; - }; - buttons { - lantiq,pins = "io11", "io12", "io13", "io28"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&boardconfig 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x30000>; - read-only; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x40000 0x7b0000>; - }; - - boardconfig: partition@7f0000 { - label = "board_config"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <3>; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - lantiq,external-clock; - interrupt-map = < - 0x7000 0 0 1 &icu0 30 - 0x7800 0 0 1 &icu0 135 - 0x7800 0 0 2 &icu0 135 - 0x7800 0 0 3 &icu0 135 - >; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x3>; - - wifi@1814,3592 { - compatible = "pci1814,3592"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - mtd-mac-address = <&boardconfig 0x16>; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV8539PW22.dts deleted file mode 100644 index 4bf44a10e1..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV8539PW22.dts +++ /dev/null @@ -1,181 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube"; - model = "Speedport W 504V Typ A"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl_green; - led-internet = &online_green; - led-wifi = &wireless_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wlan { - label = "wlan"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - /* key DECT is missing */ - }; - - leds { - compatible = "gpio-leds"; - - power_green: power-green { - label = "arv8539pw22:green:power"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power-red { - label = "arv8539pw22:red:power"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - - dsl_green: dsl-green { - label = "arv8539pw22:green:dsl"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - - online_green: online-green { - label = "arv8539pw22:green:online"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - - wireless_green: wireless-green { - label = "arv8539pw22:green:wlan"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - /* - telefonie green is missing - */ - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - relay { - lantiq,pins = "io31"; - lantiq,output = <1>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&art 0x16>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x30000>; /* 192 KiB */ - read-only; - }; - - partition@30000 { - label = "uboot"; - reg = <0x30000 0x10000>; /* 64 KiB */ - read-only; - }; - - partition@40000 { - label = "firmware"; - reg = <0x40000 0x7b0000>; /* 7872 KiB */ - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; /* 64 KiB*/ - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@168c,0029 { - compatible = "pci168c,0029"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - mtd-mac-address = <&art 0x16>; - mtd-mac-address-increment = <1>; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ASL56026.dts deleted file mode 100644 index 3d10f582b0..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ASL56026.dts +++ /dev/null @@ -1,155 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9"; - model = "BT OpenReach VDSL Modem"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 40 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - dsl: dsl { - label = "asl56026:green:dsl"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - - /* power-* is a bicolour led */ - power_green: power_green { - label = "asl56026:green:power"; - gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - power_red: power_red { - label = "asl56026:red:power"; - gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - power_led_blink { - gpio-export,name = "power_led_blink"; - gpio-export,output = <0>; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x0800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "uboot_env"; - reg = <0x30000 0x10000>; - }; - - partition@40000 { - label = "firmware"; - reg = <0x40000 0x750000>; - }; - - partition@790000 { - label = "ddrconfig"; - reg = <0x790000 0x70000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV2B.dts deleted file mode 100644 index 40886feec4..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV2B.dts +++ /dev/null @@ -1,238 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube"; - model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */ - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_orange; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &broadband_blue; - led-wifi = &wireless_blue; - }; - - memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - findhandset { - label = "findhandset"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - upgrading-orange { - label = "bthomehubv2b:orange:upgrading"; - gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; - }; - - phone-orange { - label = "bthomehubv2b:orange:phone"; - gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; - }; - phone-blue { - label = "bthomehubv2b:blue:phone"; - gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; - }; - - wireless-orange { - label = "bthomehubv2b:orange:wireless"; - gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; - }; - wireless_blue: wireless-blue { - label = "bthomehubv2b:blue:wireless"; - gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; - }; - - broadband-red { - label = "bthomehubv2b:red:broadband"; - gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; - }; - broadband-orange { - label = "bthomehubv2b:orange:broadband"; - gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; - }; - broadband_blue: broadband-blue { - label = "bthomehubv2b:blue:broadband"; - gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; - }; - - power_red: power-red { - label = "bthomehubv2b:red:power"; - gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; - }; - power_orange: power-orange { - label = "bthomehubv2b:orange:power"; - gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - power_blue: power-blue { - label = "bthomehubv2b:blue:power"; - gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - }; - - btn_in { - lantiq,pins = "io2", "io15", "io22"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - }; -}; - -&gpios { - status = "okay"; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { /* NOR Flash: Spansion S29AL004D 512KB */ - compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ - lantiq,cs = <0>; - bank-width = <2>; - reg = <0 0x0 0x80000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; /* 256KB */ - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x10000>; /* 64KB */ - }; - - partition@50000 { - label = "rg_conf_1"; - reg = <0x50000 0x10000>; - }; - - partition@60000 { - label = "rg_conf_2"; - reg = <0x60000 0x10000>; - }; - - partition@70000 { - label = "rg_conf_factory"; - reg = <0x70000 0x10000>; - }; - }; - }; - - flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <1 0x0 0x2000000 >; - req-mask = <0x1>; /* PCI request lines to mask during NAND access */ - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ath9k_cal: partition@0 { - label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */ - reg = <0x00000 0x4000>; - read-only; - }; - - partition@4000 { - label = "kernel"; - reg = <0x4000 0x200000>; - }; - - partition@164000 { - label = "ubi"; - reg = <0x204000 0x1dfc000>; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@168c,0027 { - compatible = "pci168c,0027"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV3A.dts deleted file mode 100644 index 044ae2b417..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV3A.dts +++ /dev/null @@ -1,191 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9"; - model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */ - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_orange; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &broadband_blue; - led-wifi = &wireless_blue; - }; - - memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - restart { - label = "restart"; - gpios = <&gpio 52 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 53 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - wireless-red { - label = "bthomehubv3a:red:wireless"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - wireless-orange { - label = "bthomehubv3a:orange:wireless"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - wireless_blue: wireless-blue { - label = "bthomehubv3a:blue:wireless"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - - broadband-red { - label = "bthomehubv3a:red:broadband"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - broadband-orange { - label = "bthomehubv3a:orange:broadband"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - }; - broadband_blue: broadband-blue { - label = "bthomehubv3a:blue:broadband"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - - power_red: power-red { - label = "bthomehubv3a:red:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - power_orange: power-orange { - label = "bthomehubv3a:orange:power"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_blue: power-blue { - label = "bthomehubv3a:blue:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - }; - }; -}; - -&gsw { - phy-mode = "rgmii"; -}; - -&localbus { - flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <1 0x0 0x2000000 >; - req-mask = <0x1>; /* PCI request lines to mask during NAND access */ - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "preboot"; - reg = <0x00000 0x8000>; - read-only; - }; - partition@8000 { - label = "u-boot"; - reg = <0x8000 0x05c000>; - read-only; - }; - partition@64000 { - label = "uboot_env"; - reg = <0x64000 0x004000>; - }; - ath9k_cal: partition@68000 { - label = "art-copy"; - reg = <0x68000 0x004000>; - }; - partition@6c000 { - label = "kernel"; - reg = <0x6c000 0x200000>; - }; - partition@26c000 { - label = "ubi"; - reg = <0x26c000 0x1d94000>; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@7000 { - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV5A.dts deleted file mode 100644 index f6a2d9f6a7..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV5A.dts +++ /dev/null @@ -1,283 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9"; - model = "BT Home Hub 5A"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &broadband_blue; - led-wifi = &wireless_blue; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - restart { - label = "restart"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - /* broadband-* is a single RGB led */ - broadband-red { - label = "bthomehubv5a:red:broadband"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - }; - broadband-green { - label = "bthomehubv5a:green:broadband"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - broadband_blue: broadband-blue { - label = "bthomehubv5a:blue:broadband"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - /* wireless-* is a single RGB led */ - wireless-red { - label = "bthomehubv5a:red:wireless"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - wireless-green { - label = "bthomehubv5a:green:wireless"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - wireless_blue: wireless-blue { - label = "bthomehubv5a:blue:wireless"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - /* power-* is a single RGB led */ - power_red: power-red { - label = "bthomehubv5a:red:power"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - power_green: power-green { - label = "bthomehubv5a:green:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_blue: power-blue { - label = "bthomehubv5a:blue:power"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - dimmed { - label = "dimmed"; - gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain; - }; - pcie_rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - lantiq,open-drain; - }; - usb_vbus { - lantiq,pins = "io33"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; -}; - -&localbus { - flash@1 { - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <0x1 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - nand-on-flash-bbt; - nand-ecc-strength = <3>; - nand-ecc-step-size = <256>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xa0000>; - read-only; - }; - partition@a0000 { - label = "uboot-env"; - reg = <0xa0000 0x20000>; - read-only; - }; - partition@c0000 { - label = "unused"; - reg = <0xc0000 0x40000>; - }; - partition@100000 { - label = "ubi"; - reg = <0x100000 0x7e80000>; - }; - /* - * last 512 KiB are for the bad block table, not writable - */ - }; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@168c,002d { - compatible = "pci168c,002d"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - qca,disable-5ghz; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/DGN1000B.dts b/target/linux/lantiq/files/arch/mips/boot/dts/DGN1000B.dts deleted file mode 100644 index 943b00f898..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/DGN1000B.dts +++ /dev/null @@ -1,153 +0,0 @@ -/dts-v1/; - -#include "amazonse.dtsi" - -#include - -/ { - compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase"; - model = "Netgear DGN1000B"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &online_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x1000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - dsl: dsl { - label = "dgn1000b:green:dsl"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - online_green: online { - label = "dgn1000b:green:online"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - online2 { - label = "dgn1000b:red:online"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - wps { - label = "dgn1000b:green:wps"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - power: power { - label = "dgn1000b:green:power"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - /* - power red is missing - */ - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - keys_in { - lantiq,pins = "io0",/* "io25", */"io29"; - lantiq,pull = <2>; - lantiq,open-drain = <1>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mac-address = [ 00 11 22 33 44 55 ]; -}; - -&spi { - status = "okay"; - - flash@1 { - compatible = "jedec,spi-nor"; - reg = <1>; - spi-max-frequency = <5000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "ENV_MAC"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "DPF"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x10000>; - label = "NVRAM"; - read-only; - }; - - partition@500000 { - reg = <0x50000 0x003a0000>; - label = "kernel"; - }; - }; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dts b/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dts deleted file mode 100644 index 98a2ebd98e..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dts +++ /dev/null @@ -1,8 +0,0 @@ -/dts-v1/; - -#include "DGN3500.dtsi" - -/ { - compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9"; - model = "Netgear DGN3500"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dtsi deleted file mode 100644 index a3dbbbdfad..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500.dtsi +++ /dev/null @@ -1,185 +0,0 @@ -#include "ar9.dtsi" - -#include - -/ { - chosen { - bootargs = "root= console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &internet; - led-usb = &led_usb; - led-wifi = &wifi_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - rtl8366rb { - compatible = "realtek,rtl8366rb"; - gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>; - - realtek,initvals = < - 0x0000 0x0830 - 0x0400 0x8130 - 0x000a 0x83ed - 0x0f51 0x0017 - 0x02f5 0x0048 - 0x02fa 0xffdf - 0x02fb 0xffe0 - 0x0450 0x0000 - 0x0401 0x0000 - 0x0431 0x0960 - >; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 36 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 53 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - internet: internet { - label = "dgn3500:green:internet"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - internet2 { - label = "dgn3500:red:internet"; - gpios = <&gpio 30 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "dgn3500:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "dgn3500:green:usb"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; - power_green: power { - label = "dgn3500:green:power"; - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power2 { - label = "dgn3500:red:power"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - }; - wifi_green: wifi { - label = "dgn3500:green:wireless"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - wifi2 { - label = "dgn3500:amber:wireless"; - gpios = <&gpio 51 GPIO_ACTIVE_LOW>; - }; - wps { - label = "dgn3500:green:wps"; - gpios = <&gpio 52 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; -}; - -&gsw { - phy-mode = "mii"; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@168c,0029 { - compatible = "pci168c,0029"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x10000>; - label = "uboot"; - read-only; - }; - - partition@10000 { - reg = <0x10000 0x10000>; - label = "uboot-env"; - read-only; - }; - - ath9k_cal: partition@20000 { - reg = <0x20000 0x10000>; - label = "calibration"; - read-only; - }; - - partition@50000 { - reg = <0x50000 0xfa0000>; - label = "firmware"; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500B.dts b/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500B.dts deleted file mode 100644 index d1d788cc7d..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/DGN3500B.dts +++ /dev/null @@ -1,8 +0,0 @@ -/dts-v1/; - -#include "DGN3500.dtsi" - -/ { - compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9"; - model = "Netgear DGN3500B"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/DM200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/DM200.dts deleted file mode 100644 index cdba656e49..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/DM200.dts +++ /dev/null @@ -1,186 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9"; - model = "Netgear DM200"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_amber; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - annexa { - gpio-export,name = "annexa"; - gpio-export,output = <0>; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - }; - annexb { - gpio-export,name = "annexb"; - gpio-export,output = <0>; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_amber: power_amber { - label = "dm200:amber:power"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - power_green: power_green { - label = "dm200:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - - lan_amber { - label = "dm200:amber:lan"; - gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; - }; - lan_green { - label = "dm200:green:lan"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - dsl_amber { - label = "dm200:amber:dsl"; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - dsl_green: dsl_green { - label = "dm200:green:dsl"; - gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -ð0 { - lantiq,phys = <&gphy1>; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&pcie0 { - status = "disabled"; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <10000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - partition@0 { - reg = <0x0 0x20000>; - label = "uboot"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "gphyfirmware"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x7b0000>; - label = "firmware"; - }; - - partition@7e0000 { - reg = <0x7e0000 0x10000>; - label = "sysconfig"; - read-only; - }; - - partition@7f0000 { - reg = <0x7f0000 0x2000>; - label = "ubootconfig"; - read-only; - }; - - partition@7f2000 { - reg = <0x7f2000 0x1000>; - label = "ART"; - read-only; - }; - - partition@7f3000 { - reg = <0x7f3000 0x1000>; - label = "pot"; - read-only; - }; - - partition@7f4000 { - reg = <0x7f4000 0xc000>; - label = "ret"; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY50712.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY50712.dts deleted file mode 100644 index 1afc74900e..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY50712.dts +++ /dev/null @@ -1,72 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -/ { - compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube"; - model = "Intel EASY50712 Nand"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; /* 64 KB */ - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; /* 64 KB */ - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x400000>; - }; - }; - }; -}; - -&pci0 { - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY50810.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY50810.dts deleted file mode 100644 index 87ba62de33..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY50810.dts +++ /dev/null @@ -1,73 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -/ { - compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9"; - model = "Lantiq EASY50810"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; /* 64 KB */ - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; /* 64 KB */ - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x3d0000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x400000>; - }; - }; - }; -}; - -&stp { - status = "okay"; - lantiq,shadow = <0xfff>; - lantiq,groups = <0x3>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920.dtsi deleted file mode 100644 index 4fbc1ac496..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920.dtsi +++ /dev/null @@ -1,279 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-usb = &led_usb1; - led-usb2 = &led_usb2; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; -/* reset { - label = "reset"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = ; - };*/ - paging { - label = "paging"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "easy80920:green:power"; - gpios = <&stp 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - warning { - label = "easy80920:green:warning"; - gpios = <&stp 22 GPIO_ACTIVE_HIGH>; - }; - fxs1 { - label = "easy80920:green:fxs1"; - gpios = <&stp 21 GPIO_ACTIVE_HIGH>; - }; - fxs2 { - label = "easy80920:green:fxs2"; - gpios = <&stp 20 GPIO_ACTIVE_HIGH>; - }; - fxo { - label = "easy80920:green:fxo"; - gpios = <&stp 19 GPIO_ACTIVE_HIGH>; - }; - led_usb1: usb1 { - label = "easy80920:green:usb1"; - gpios = <&stp 18 GPIO_ACTIVE_HIGH>; - }; - led_usb2: usb2 { - label = "easy80920:green:usb2"; - gpios = <&stp 15 GPIO_ACTIVE_HIGH>; - }; - sd { - label = "easy80920:green:sd"; - gpios = <&stp 14 GPIO_ACTIVE_HIGH>; - }; - wps { - label = "easy80920:green:wps"; - gpios = <&stp 12 GPIO_ACTIVE_HIGH>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - }; - - wan: interface@1 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - lantiq,wan; - - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin3 { - lantiq,groups = "exin3"; - lantiq,function = "exin"; - }; - conf_out { - lantiq,pins = "io21", - "io33"; - lantiq,open-drain; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - conf_in { - lantiq,pins = "io39"; /* exin3 */ - lantiq,pull = <2>; - }; - }; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "ENV_MAC"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "DPF"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x10000>; - label = "NVRAM"; - read-only; - }; - - partition@500000 { - reg = <0x50000 0x003a0000>; - label = "kernel"; - }; - }; - }; -}; - -&pci0 { - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; -}; - -&stp { - status = "okay"; - - lantiq,shadow = <0xffff>; - lantiq,groups = <0x7>; - lantiq,dsl = <0x3>; - lantiq,phy1 = <0x7>; - lantiq,phy2 = <0x7>; - /* lantiq,rising; */ -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NAND.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NAND.dts deleted file mode 100644 index 0bf8e1b7ef..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NAND.dts +++ /dev/null @@ -1,66 +0,0 @@ -/dts-v1/; - - -#include "EASY80920.dtsi" - -/ { - compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; - model = "Intel EASY80920 Nand"; - - chosen { - bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1"; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x100000>; /* 1024 KB */ - }; - - partition@100000 { - label = "uboot_env"; - reg = <0x100000 0x40000>; /* 256 KB */ - }; - - partition@140000 { - label = "ubootconfigB"; - reg = <0x140000 0x40000>; /* 256 KB */ - }; - - partition@180000 { - label = "gphyfirmware"; - reg = <0x180000 0x40000>; /* 256 KB */ - }; - - partition@1c0000 { - label = "ubi"; - reg = <0x1c0000 0xc800000>; - }; - - partition@c9c0000 { - label = "calibration"; - reg = <0xc9c0000 0x100000>; - }; - - partition@cac0000 { - label = "res"; - reg = <0xcac0000 0x13540000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NOR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NOR.dts deleted file mode 100644 index 6ed6c5d427..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY80920NOR.dts +++ /dev/null @@ -1,37 +0,0 @@ -/dts-v1/; - -#include "EASY80920.dtsi" - -/ { - compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; - model = "Intel EASY80920 Nor"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x7e0000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY88388.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY88388.dts deleted file mode 100644 index 12c448c2e6..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY88388.dts +++ /dev/null @@ -1,93 +0,0 @@ -/dts-v1/; - -#include -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon FTTDP8 Reference Board"; - compatible = "lantiq,easy88388", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <0x198>; - }; - }; - - pinctrl { - led_pins: led-pins { - lantiq,pins = "io34", "io35", "io36", "io37", "io38", - "io39", "io40", "io41"; - lantiq,function = "gpio"; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins &bootled_pins>; - - GPON { - label = "easy88388:green:gpon"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - }; - TEST { - label = "easy88388:green:test"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - }; - STATUS { - label = "easy88388:green:status"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - ERROR { - label = "easy88388:red:error"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - - DSL1 { - label = "easy88388:dsl:1"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - DSL2 { - label = "easy88388:dsl:2"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - DSL3 { - label = "easy88388:dsl:3"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - DSL4 { - label = "easy88388:dsl:4"; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - DSL5 { - label = "easy88388:dsl:5"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - DSL6 { - label = "easy88388:dsl:6"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - DSL7 { - label = "easy88388:dsl:7"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - DSL8 { - label = "easy88388:dsl:8"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY88444.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY88444.dts deleted file mode 100644 index 3f29d319cd..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY88444.dts +++ /dev/null @@ -1,72 +0,0 @@ -/dts-v1/; - -#include -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon FTTdp G.FAST Reference Board"; - compatible = "lantiq,easy88444", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <0x198>; - }; - }; - - pinctrl { - led_pins: led-pins { - lantiq,pins = "io34", "io35", "io37"; - lantiq,function = "gpio"; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins &bootled_pins>; - - GPON { - label = "easy88444:green:gpon"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - }; - TEST { - label = "easy88444:green:test"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - }; - STATUS { - label = "easy88444:green:status"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - - GFAST1 { - label = "easy88444:gfast:1"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - GFAST2 { - label = "easy88444:gfast:2"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - GFAST3 { - label = "easy88444:gfast:3"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - GFAST4 { - label = "easy88444:gfast:4"; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000-base.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000-base.dtsi deleted file mode 100644 index fa8c0b4b06..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000-base.dtsi +++ /dev/null @@ -1,110 +0,0 @@ - -#include -#include - -/ { - compatible = "lantiq,easy98000", "lantiq,falcon"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&bootled_pins>; - - LED_0 { - label = "easy98000:green:gpon"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_1 { - label = "easy98000:red:gpon"; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_2 { - label = "easy98000:green:gpon_tx"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_3 { - label = "easy98000:green:gpon_rx"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_4 { - label = "easy98000:green:voice"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_5 { - label = "easy98000:green:status"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; -}; - -&ebu_cs1 { - eth0: ethernet@3 { - compatible = "davicom,dm9000"; - device_type = "network"; - reg = <0x0000003 0x1>, <0x0000001 0x1>; - reg-names = "addr", "data"; - interrupt-parent = <&gpio1>; - #interrupt-cells = <2>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpld@3c00000 { - compatible = "lantiq,easy98000_addon"; - reg = <0x3c00000 0x2>; - }; - - cpld@3c0000c { - compatible = "lantiq,easy98000_cpld_led"; - reg = <0x3c0000c 0x2>, <0x3c00012 0x2>; - }; -}; - -/* // enable this for second uart: -&serial1 { - status = "okay"; -};*/ - -&spi { - status = "okay"; - - eeprom@2 { - compatible = "atmel,at25", "atmel,at25160n"; - reg = <2>; - spi-max-frequency = <1000000>; - spi-cpha; - spi-cpol; - - pagesize = <32>; - size = <2048>; - address-width = <16>; - }; -}; - -&i2c { - status = "okay"; - - clock-frequency = <100000>; - - /* eeprom-emulation by OMU */ - eeprom@50 { - compatible = "at,24c02"; - reg = <0x50>; - }; - eeprom@51 { - compatible = "at,24c02"; - reg = <0x51>; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NAND.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NAND.dts deleted file mode 100644 index 2155f0cb1d..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NAND.dts +++ /dev/null @@ -1,40 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "EASY98000-base.dtsi" - -/ { - model = "Lantiq Falcon (NAND)"; - compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon"; - - aliases { - spi0 = &spi; - }; -}; - -&ebu_cs0 { - flash@0 { - compatible = "gen_nand", "lantiq,nand-falcon"; - bank-width = <1>; - reg = <0x0 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - linux,mtd-name = "gen_nand"; - bbt-use-flash; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x40000 0x40000>; - }; - - partition@20000 { - label = "linux"; - reg = <0x80000 0x3d0000>; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NOR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NOR.dts deleted file mode 100644 index 3cb00343f5..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000NOR.dts +++ /dev/null @@ -1,42 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "EASY98000-base.dtsi" - -/ { - model = "Lantiq Falcon (NOR)"; - compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon"; - - aliases { - spi0 = &spi; - }; -}; - -&ebu_cs0 { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0x0 0x4000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x40000 0x40000>; - }; - - partition@20000 { - label = "linux"; - reg = <0x80000 0x3d0000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000SFLASH.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000SFLASH.dts deleted file mode 100644 index bbe524e94e..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98000SFLASH.dts +++ /dev/null @@ -1,16 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "EASY98000-base.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon (SFLASH)"; - compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - spi1 = &spi; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020.dts deleted file mode 100644 index 7a3ef418d0..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020.dts +++ /dev/null @@ -1,85 +0,0 @@ -/dts-v1/; - -#include - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon Reference Board"; - compatible = "lantiq,easy98020", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <0x198>; - }; - }; - - pinctrl { - led_pins: phy-led-pins { - lantiq,pins = "io42", "io41", "io38", "io37"; - lantiq,function = "gpio"; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&bootled_pins>, <&led_pins>; - - GPON { - label = "easy98020:green:gpon"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - TEST { - label = "easy98020:green:test"; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - ETH { - label = "easy98020:green:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - VOICE { - label = "easy98020:green:voice"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - VIDEO { - label = "easy98020:green:video"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - GE0_ACT { - label = "easy98020:ge0_act"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - GE0_LINK { - label = "easy98020:ge0_link"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - GE1_ACT { - label = "easy98020:ge1_act"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - GE1_LINK { - label = "easy98020:ge1_link"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020V18.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020V18.dts deleted file mode 100644 index 571e23454a..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98020V18.dts +++ /dev/null @@ -1,68 +0,0 @@ -/dts-v1/; - -#include - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon Reference Board V1.8"; - compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <0x198>; - }; - }; - - pinctrl { - led_pins: led-pins { - lantiq,pins = "io11", "io14", "io36", "io37", "io38"; - lantiq,function = "gpio"; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins &bootled_pins>; - - GPON { - label = "easy98020:green:gpon"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - TEST { - label = "easy98020:green:test"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - ETH { - label = "easy98020:green:status"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - VOICE { - label = "easy98020:green:voice"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - VIDEO { - label = "easy98020:green:video"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98021.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98021.dts deleted file mode 100644 index 7eb40bde24..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98021.dts +++ /dev/null @@ -1,81 +0,0 @@ -/dts-v1/; - -#include - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon HGU Reference Board"; - compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = <0x198>; - }; - }; - - gpio-mmc { - /* Place-holder for SIM-Card connector, - to list the used GPIOs, no official binding */ - compatible = "gpio-mmc"; - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>, - <&gpio0 3 GPIO_ACTIVE_HIGH>, - <&gpio0 2 GPIO_ACTIVE_HIGH>, - <0>; /* no CS */ - gpio-names = "di", "do", "clk", "cs"; - reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; - }; - - pinctrl { - led_pins: led-pins { - lantiq,pins = "io11", "io14", "io36", "io37", "io38"; - lantiq,function = "gpio"; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins &bootled_pins>; - - GPON { - label = "easy98021:green:gpon"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - TEST { - label = "easy98021:red:test"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - ETH { - label = "easy98021:green:status"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - VOICE { - label = "easy98021:green:voice"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - SIMCARD { - label = "easy98021:green:simcard"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE.dts deleted file mode 100644 index df941cdb67..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE.dts +++ /dev/null @@ -1,76 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon SFP Stick with SyncE"; - compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - pinctrl { - compatible = "lantiq,pinctrl-falcon"; - - asc0_func1: func1 { - func1_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - func1_rx { - lantiq,pins = "io33"; - lantiq,mux = <0>; - }; - }; - asc0_func2: func2 { - func2_tx { - lantiq,pins = "io32"; - lantiq,mux = <0>; - }; - func2_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - asc0_func3: func3 { - func3_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - func3_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - }; - - pinselect-asc0 { - compatible = "lantiq,pinselect-asc0"; - pinctrl-names = "asc0", "func1", "func2", "func3"; - pinctrl-0 = <&asc0_pins>; - pinctrl-1 = <&asc0_func1>; - pinctrl-2 = <&asc0_func2>; - pinctrl-3 = <&asc0_func3>; - }; -}; - -&serial0 { - pinctrl-names = "default"; - /* use "empty" pinctrl to leave setting from u-boot enabled */ - pinctrl-0 = < >; -}; - -&i2c { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE1588.dts deleted file mode 100644 index a3abc6e707..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/EASY98035SYNCE1588.dts +++ /dev/null @@ -1,76 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon SFP Stick with SyncE/1588"; - compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - pinctrl { - compatible = "lantiq,pinctrl-falcon"; - - asc0_func1: func1 { - func1_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - func1_rx { - lantiq,pins = "io33"; - lantiq,mux = <0>; - }; - }; - asc0_func2: func2 { - func2_tx { - lantiq,pins = "io32"; - lantiq,mux = <0>; - }; - func2_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - asc0_func3: func3 { - func3_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - func3_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - }; - - pinselect-asc0 { - compatible = "lantiq,pinselect-asc0"; - pinctrl-names = "asc0", "func1", "func2", "func3"; - pinctrl-0 = <&asc0_pins>; - pinctrl-1 = <&asc0_func1>; - pinctrl-2 = <&asc0_func2>; - pinctrl-3 = <&asc0_func3>; - }; -}; - -&serial0 { - pinctrl-names = "default"; - /* use "empty" pinctrl to leave setting from u-boot enabled */ - pinctrl-0 = < >; -}; - -&i2c { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-MDU.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-MDU.dts deleted file mode 100644 index c5da8b564f..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-MDU.dts +++ /dev/null @@ -1,53 +0,0 @@ -/dts-v1/; - -#include - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon / Vinax MDU Board"; - compatible = "lantiq,falcon-mdu", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&bootled_pins>; - - LED_0 { - label = "mdu:green:gpon"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_1 { - label = "mdu:green:status"; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_2 { - label = "mdu:green:2"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_3 { - label = "mdu:green:3"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - LED_4 { - label = "mdu:green:4"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; -}; - diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-SFP.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-SFP.dts deleted file mode 100644 index 8d45de4ebe..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FALCON-SFP.dts +++ /dev/null @@ -1,76 +0,0 @@ -/dts-v1/; - -#include "falcon.dtsi" -#include "falcon-sflash-16M.dtsi" - -/ { - model = "Lantiq Falcon SFP Stick"; - compatible = "lantiq,falcon-sfp", "lantiq,falcon"; - - aliases { - spi0 = &ebu_cs0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; // 64M at 0x0 - }; - - pinctrl { - compatible = "lantiq,pinctrl-falcon"; - - asc0_func1: func1 { - func1_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,output = <0>; - }; - func1_rx { - lantiq,pins = "io33"; - lantiq,mux = <0>; - }; - }; - asc0_func2: func2 { - func2_tx { - lantiq,pins = "io32"; - lantiq,mux = <0>; - }; - func2_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - asc0_func3: func3 { - func3_tx { - lantiq,pins = "io32"; - lantiq,mux = <1>; - lantiq,output = <0>; - }; - func3_rx { - lantiq,pins = "io33"; - lantiq,mux = <1>; - lantiq,input = <0>; - }; - }; - }; - - pinselect-asc0 { - compatible = "lantiq,pinselect-asc0"; - pinctrl-names = "asc0", "func1", "func2", "func3"; - pinctrl-0 = <&asc0_pins>; - pinctrl-1 = <&asc0_func1>; - pinctrl-2 = <&asc0_func2>; - pinctrl-3 = <&asc0_func3>; - }; -}; - -&serial0 { - pinctrl-names = "default"; - /* use "empty" pinctrl to leave setting from u-boot enabled */ - pinctrl-0 = < >; -}; - -&i2c { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-HYNIX.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-HYNIX.dts deleted file mode 100644 index 15bd0d2713..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-HYNIX.dts +++ /dev/null @@ -1,39 +0,0 @@ -/dts-v1/; - -#include "FRITZ3370-REV2.dtsi" - -/ { - compatible = "avm,fritz3370-rev2-hynix", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND)"; -}; - -&localbus { - flash@1 { - compatible = "lantiq,nand-xway"; - bank-width = <2>; - reg = <1 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - nand-ecc-mode = "soft"; - nand-ecc-strength = <3>; - nand-ecc-step-size = <256>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-MICRON.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-MICRON.dts deleted file mode 100644 index 7e4a3e1114..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2-MICRON.dts +++ /dev/null @@ -1,37 +0,0 @@ -/dts-v1/; - -#include "FRITZ3370-REV2.dtsi" - -/ { - compatible = "avm,fritz3370-rev2-micron", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 3370 Rev. 2 (Micron NAND)"; -}; - -&localbus { - flash@1 { - compatible = "lantiq,nand-xway"; - bank-width = <2>; - reg = <1 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - nand-ecc-mode = "on-die"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2.dtsi deleted file mode 100644 index bac27c3649..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3370-REV2.dtsi +++ /dev/null @@ -1,279 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 3370 Rev. 2"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - - led-dsl = &dsl; - led-internet = &info_green; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - wifi { - label = "wlan"; - gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power { - label = "fritz3370:green:power"; - gpios = <&gpio 32 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - power_red: power2 { - label = "fritz3370:red:power"; - gpios = <&gpio 33 GPIO_ACTIVE_LOW>; - }; - - info_red { - label = "fritz3370:red:info"; - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - }; - - wifi: wifi { - label = "fritz3370:green:wlan"; - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - - dsl: dsl { - label = "fritz3370:green:dsl"; - gpios = <&gpio 36 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "fritz3370:green:lan"; - gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - - info_green: info_green { - label = "fritz3370:green:info"; - gpios = <&gpio 47 GPIO_ACTIVE_LOW>; - }; - }; - - usb0_vbus: regulator-usb0-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB1_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; - }; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io37", "io44"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - - pcie-rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&pcie0 { - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@0,0 { - compatible = "pci0,0"; - reg = <0 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ - }; - }; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - urlader: partition@0 { - reg = <0x0 0x20000>; - label = "urlader"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "tffs (1)"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "tffs (2)"; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb0_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb1_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts deleted file mode 100644 index aa825abd9f..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts +++ /dev/null @@ -1,169 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9"; - model = "AVM FRITZ!Box 7312"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &info_green; - led-wifi = &wlan; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wlan { - label = "wlan"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - dect { - label = "dect"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "fritz7312:green:power"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - voice { - label = "fritz7312:green:fon"; - gpios = <&gpio 47 GPIO_ACTIVE_LOW>; - }; - dect { - label = "fritz7312:green:dect"; - gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - wlan: wlan { - label = "fritz7312:green:wlan"; - gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - }; - info_green: info_green { - label = "fritz7312:green:info"; - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ar8030-intr { - lantiq,groups = "exin3"; - lantiq,function = "exin"; - lantiq,pull = <2>; - lantiq,output = <0>; - }; - ar8030-clk { - lantiq,groups = "clkout2"; - lantiq,output = <1>; - lantiq,open-drain; - }; - ar8030-rst { - lantiq,pins = "io34"; - lantiq,output = <1>; - lantiq,pull = <2>; - lantiq,open-drain; - }; - }; -}; - -&gsw { - phy-mode = "rmii"; - phy-handle = <&phy0>; - mtd-mac-address = <&ath9k_cal 0xa91>; - mtd-mac-address-increment = <(-2)>; - - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@0 { - reg = <0>; - reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ath9k_cal: partition@0 { - label = "urlader"; - reg = <0x00000 0x20000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0xf60000>; - }; - - partition@f80000 { - label = "tffs (1)"; - reg = <0xf80000 0x40000>; - read-only; - }; - - partition@fc0000 { - label = "tffs (2)"; - reg = <0xfc0000 0x40000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, - <&pci_gnt3_pins>, <&pci_gnt4_pins>, - <&pci_req1_pins>, <&pci_req2_pins>, - <&pci_req4_pins>; - pinctrl-names = "default"; - - req-mask = <0xf>; - gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; - - wifi@0,0 { - compatible = "pci0,0"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7320.dts deleted file mode 100644 index 424b778bb4..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7320.dts +++ /dev/null @@ -1,151 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9"; - model = "AVM FRITZ!Box 7320"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &info_green; - led-wifi = &wlan; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - rfkill { - label = "rfkill"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - dect { - label = "dect"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "fritz7320:green:power"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - voice { - label = "fritz7320:green:fon"; - gpios = <&gpio 47 GPIO_ACTIVE_LOW>; - }; - dect { - label = "fritz7320:green:dect"; - gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - wlan: wlan { - label = "fritz7320:green:wlan"; - gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - }; - info_green: info_green { - label = "fritz7320:green:info"; - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - info_red { - label = "fritz7320:red:info"; - gpios = <&gpio 45 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gsw { - phy-mode = "mii"; - mtd-mac-address = <&ath9k_cal 0xa91>; - mtd-mac-address-increment = <(-2)>; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ath9k_cal: partition@0 { - label = "urlader"; - reg = <0x00000 0x20000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0xf60000>; - }; - - partition@f80000 { - label = "tffs (1)"; - reg = <0xf80000 0x40000>; - read-only; - }; - - partition@fc0000 { - label = "tffs (2)"; - reg = <0xfc0000 0x40000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, - <&pci_gnt3_pins>, <&pci_gnt4_pins>, - <&pci_req1_pins>, <&pci_req2_pins>, - <&pci_req3_pins>, <&pci_req4_pins>; - - req-mask = <0xf>; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@0,0 { - compatible = "pci0,0"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7360SL.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7360SL.dts deleted file mode 100644 index 0fbe6396a8..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7360SL.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "FRITZ736X.dtsi" - -#include -#include - -/ { - compatible = "avm,fritz7360sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 7360 SL"; -}; - -&power_green { - label = "fritz7360sl:green:power"; -}; - -&power_red { - label = "fritz7360sl:red:power"; -}; - -&info_green { - label = "fritz7360sl:green:info"; -}; - -&wifi { - label = "fritz7360sl:green:wlan"; -}; - -&info_red { - label = "fritz7360sl:red:info"; -}; - -&dect { - label = "fritz7360sl:green:dect"; -}; - -&state_default { - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - urlader: partition@0 { - label = "urlader"; - reg = <0x00000 0x20000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0xf60000>; - }; - - partition@f80000 { - label = "tffs (1)"; - reg = <0xf80000 0x40000>; - read-only; - }; - - partition@fc0000 { - label = "tffs (2)"; - reg = <0xfc0000 0x40000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7362SL.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7362SL.dts deleted file mode 100644 index feb9242574..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7362SL.dts +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "FRITZ736X.dtsi" - -#include -#include - -/ { - compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 7362 SL"; -}; - -&power_green { - label = "fritz7362sl:green:power"; -}; - -&power_red { - label = "fritz7362sl:red:power"; -}; - -&info_green { - label = "fritz7362sl:green:info"; -}; - -&wifi { - label = "fritz7362sl:green:wlan"; -}; - -&info_red { - label = "fritz7362sl:red:info"; -}; - -&dect { - label = "fritz7362sl:green:dect"; -}; - -&state_default { - pcie-rst { - lantiq,pins = "io21"; - lantiq,open-drain = <1>; - lantiq,output = <1>; - }; -}; - -&spi { - status = "okay"; - - flash@4 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <4 0>; - spi-max-frequency = <1000000>; - - urlader: partition@0 { - reg = <0x0 0x40000>; - label = "urlader"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x60000>; - label = "tffs (1)"; - read-only; - }; - - partition@A0000 { - reg = <0xA0000 0x60000>; - label = "tffs (2)"; - read-only; - }; - }; -}; - -&localbus { - flash@1 { - compatible = "lantiq,nand-xway"; - lantiq,cs1 = <1>; - bank-width = <1>; - reg = <1 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - nand-ecc-mode = "on-die"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; - -&pcie0 { - gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; - - pcie@0 { - #size-cells = <1>; - #address-cells = <2>; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi deleted file mode 100644 index 1553d2f7f4..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi +++ /dev/null @@ -1,200 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - - led-dsl = &info_green; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - dect { - label = "dect"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - - power_green: power { - gpios = <&gpio 32 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - power_red: power2 { - gpios = <&gpio 33 GPIO_ACTIVE_LOW>; - }; - - info_green: info_green { - gpios = <&gpio 47 GPIO_ACTIVE_LOW>; - }; - - wifi: wifi { - gpios = <&gpio 36 GPIO_ACTIVE_LOW>; - }; - - info_red: info_red { - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - }; - - dect: dect { - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&urlader 0xa91>; - mtd-mac-address-increment = <(-2)>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rmii"; - phy-handle = <&phy0>; - }; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rmii"; - phy-handle = <&phy1>; - }; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x00>; - compatible = "ethernet-phy-ieee802.3-c22"; - reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - }; - - phy1: ethernet-phy@1 { - reg = <0x01>; - compatible = "ethernet-phy-ieee802.3-c22"; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io37", "io44"; - lantiq,pull = <0>; - lantiq,open-drain; - lantiq,output = <1>; - }; - }; - -}; - -&pcie0 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <1>; - #address-cells = <2>; - device_type = "pci"; - - wifi@168c,002e { - compatible = "pci168c,002e"; - reg = <0 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7412.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7412.dts deleted file mode 100644 index 43216d66be..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7412.dts +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 7412"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - - led-dsl = &info; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect { - label = "dect"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power_green { - label = "fritz7412:green:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - power_red: power_red { - label = "fritz7412:red:power"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "fritz7412:green:fon"; - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - }; - - dect { - label = "fritz7412:green:dect"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - wifi: wifi { - label = "fritz7412:green:wifi"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - }; - - info: info { - label = "fritz7412:green:info"; - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nand-xway"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - lantiq,cs = <1>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "urlader"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "nand-tffs"; - reg = <0x40000 0x400000>; - read-only; - }; - - partition@440000 { - label = "kernel"; - reg = <0x440000 0x400000>; - }; - - partition@840000 { - label = "ubi"; - reg = <0x840000 0x3000000>; - }; - - partition@3840000 { - label = "reserved-kernel"; - reg = <0x3840000 0x400000>; - read-only; - }; - - partition@3c40000 { - label = "reserved-filesystem"; - reg = <0x3c40000 0x3000000>; - read-only; - }; - - partition@6c40000 { - label = "config"; - reg = <0x6c40000 0x400000>; - read-only; - }; - - partition@6e40000 { - label = "nand-filesystem"; - reg = <0x6e40000 0x400000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@168c,002e { - compatible = "pci168c,002e"; - reg = <0 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pcie-rst { - lantiq,pins = "io11"; - lantiq,open-drain = <1>; - lantiq,output = <1>; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -ð0 { - lantiq,phys = <&gphy0>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&vmmc { - status = "okay"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/GIGASX76X.dts b/target/linux/lantiq/files/arch/mips/boot/dts/GIGASX76X.dts deleted file mode 100644 index 0072f7e2b1..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/GIGASX76X.dts +++ /dev/null @@ -1,119 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include - -/ { - compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube"; - model = "Gigaset SX761,SX762,SX763"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - switch { - gpio-export,name = "switch"; - gpio-export,output = <1>; - gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpios { - status = "okay"; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x30000>; - }; - - partition@10000 { - label = "uboot_env"; - reg = <0x30000 0x10000>; - }; - - partition@40000 { - label = "firmware"; - reg = <0x40000 0x7c0000>; - }; - }; - }; - - gpiomm: gpio@1 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10 >; - #address-cells = <1>; - #size-cells = <1>; - #gpio-cells = <2>; - gpio-controller; - lantiq,shadow = <0x3>; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/H201L.dts b/target/linux/lantiq/files/arch/mips/boot/dts/H201L.dts deleted file mode 100644 index 9b640e0327..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/H201L.dts +++ /dev/null @@ -1,172 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9"; - model = "ZTE H210L"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_green; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &online; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 53 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 55 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power { - label = "h201l:green:power"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - online: online { - label = "h201l:green:internet"; - gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "h201l:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - phone { - label = "h201l:green:phone"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - }; - wps { - label = "h201l:green:wps"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "h201l:green:wlan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "h201l:green:usb"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - switch { - gpio-export,name = "switch"; - gpio-export,output = <1>; - gpios = <&gpio 38 GPIO_ACTIVE_HIGH>; - }; - usb { - gpio-export,name = "usb"; - gpio-export,output = <1>; - gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; - }; - wifi { - gpio-export,name = "wifi"; - gpio-export,output = <1>; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 36 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - }; -}; - -&gsw { - phy-mode = "rgmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x20000>; - read-only; - }; - - partition@20000 { - label = "uboot_env"; - reg = <0x20000 0x10000>; - read-only; - }; - - partition@30000 { - label = "firmware"; - reg = <0x30000 0x7d0000>; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts deleted file mode 100644 index 79896c6478..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts +++ /dev/null @@ -1,178 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9"; - model = "ZyXEL P-2601HN-Fx"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &online; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 53 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power { - label = "p2601hnfx:green:power"; - gpios = <&stp 11 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power2 { - label = "p2601hnfx:red:power"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - }; - online: online { - label = "p2601hnfx:green:internet"; - gpios = <&stp 13 GPIO_ACTIVE_LOW>; - }; - online2 { - label = "p2601hnfx:red:internet"; - gpios = <&stp 12 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "p2601hnfx:green:dsl"; - gpios = <&stp 14 GPIO_ACTIVE_LOW>; - }; - phone { - label = "p2601hnfx:green:phone"; - gpios = <&stp 9 GPIO_ACTIVE_LOW>; - }; - phone2 { - label = "p2601hnfx:orange:phone"; - gpios = <&stp 8 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "p2601hnfx:green:wireless"; - gpios = <&stp 15 GPIO_ACTIVE_LOW>; - }; - wifi2 { - label = "p2601hnfx:orange:wireless"; - gpios = <&stp 10 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - switch { - gpio-export,name = "switch"; - gpio-export,output = <1>; - gpios = <&gpio 50 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "firmware"; - reg = <0x60000 0xfa0000>; - }; - }; - }; -}; - -&pci0 { - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; -}; - -&stp { - status = "okay"; - lantiq,shadow = <0xfff>; - lantiq,groups = <0x3>; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF1.dts deleted file mode 100644 index d1a04a4a78..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF1.dts +++ /dev/null @@ -1,71 +0,0 @@ -/dts-v1/; - -#include "P2812HNUFX.dtsi" - -/ { - compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; - model = "ZyXEL P-2812HNU-F1"; - - aliases { - led-usb = &led_usb1; - led-usb2 = &led_usb2; - }; - - leds { - led_usb1: usb1 { - label = "p2812hnuf1:green:usb1"; - gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - led_usb2: usb2 { - label = "p2812hnuf1:green:usb2"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - }; - partition@40000 { - label = "uboot-env"; - reg = <0x40000 0x20000>; - }; - partition@60000 { - label = "kernel"; - reg = <0x60000 0x300000>; - }; - partition@360000 { - label = "ubi"; - reg = <0x360000 0x7ca0000>; - }; - }; - }; -}; - -&pci0 { - wifi@1814,3062 { - compatible = "pci1814,3062"; - reg = <0x7000 0 0 0 0>; - ralink,eeprom = "RT3062.eeprom"; - }; -}; - -&pcie0 { - status = "disabled"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF3.dts b/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF3.dts deleted file mode 100644 index a607311460..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF3.dts +++ /dev/null @@ -1,65 +0,0 @@ -/dts-v1/; - -#include "P2812HNUFX.dtsi" - -/ { - compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; - model = "ZyXEL P-2812HNU-F3"; -}; - -&pci0 { - wifi@1814,3092 { - compatible = "pci1814,3092"; - reg = <0x7000 0 0 0 0>; - ralink,eeprom = "RT3092.eeprom"; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0 0x50000>; - read-only; - }; - partition@50000 { - label = "uboot-env"; - reg = <0x50000 0x10000>; - }; - partition@60000 { - label = "unused"; - reg = <0x60000 0x7a0000>; - }; - }; - }; - - flash@1 { - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <1 0x0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x200000>; - }; - partition@200000 { - label = "ubi"; - reg = <0x200000 0x7e00000>; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUFX.dtsi deleted file mode 100644 index 5f8392ca44..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUFX.dtsi +++ /dev/null @@ -1,259 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl_green; - led-internet = &internet_green; - led-wifi = &wireless_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - rfkill { - label = "rfkill"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - internet_red { - label = "p2812hnufx:red:internet"; - gpios = <&stp 16 GPIO_ACTIVE_LOW>; - }; - internet_green: internet_green { - label = "p2812hnufx:green:internet"; - gpios = <&stp 17 GPIO_ACTIVE_LOW>; - }; - dsl_green: dsl_green { - label = "p2812hnufx:green:dsl"; - gpios = <&stp 18 GPIO_ACTIVE_LOW>; - }; - dsl_orange { - label = "p2812hnufx:orange:dsl"; - gpios = <&stp 19 GPIO_ACTIVE_LOW>; - }; - wireless_orange { - label = "p2812hnufx:orange:wlan"; - gpios = <&stp 20 GPIO_ACTIVE_LOW>; - }; - wireless_green: wireless_green { - label = "p2812hnufx:green:wlan"; - gpios = <&stp 21 GPIO_ACTIVE_LOW>; - }; - power_red: power { - label = "p2812hnufx:red:power"; - gpios = <&stp 22 GPIO_ACTIVE_LOW>; - }; - power_green: power2 { - label = "p2812hnufx:green:power"; - gpios = <&stp 23 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - phone1 { - label = "p2812hnufx:green:phone"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - phone1warn { - label = "p2812hnufx:orange:phone"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - phone2warn { - label = "p2812hnufx:orange:phone2"; - gpios = <&gpio 26 GPIO_ACTIVE_LOW>; - }; - phone2 { - label = "p2812hnufx:green:phone2"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led2_pins>, - <&gphy1_led1_pins>, <&gphy1_led2_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin3 { - lantiq,groups = "exin3"; - lantiq,function = "exin"; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - ifxhcd-rst { - lantiq,pins = "io33"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&stp { - status = "okay"; - - lantiq,shadow = <0xffffff>; - lantiq,groups = <0x7>; - lantiq,dsl = <0x0>; - lantiq,phy1 = <0x0>; - lantiq,phy2 = <0x0>; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/TDW8970.dts b/target/linux/lantiq/files/arch/mips/boot/dts/TDW8970.dts deleted file mode 100644 index 25eb3dac67..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/TDW8970.dts +++ /dev/null @@ -1,8 +0,0 @@ -/dts-v1/; - -#include "TDW89X0.dtsi" - -/ { - compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; - model = "TP-LINK TD-W8970"; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/TDW8980.dts b/target/linux/lantiq/files/arch/mips/boot/dts/TDW8980.dts deleted file mode 100644 index 76875e735d..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/TDW8980.dts +++ /dev/null @@ -1,33 +0,0 @@ -/dts-v1/; - -#include "TDW89X0.dtsi" - -/ { - compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; - model = "TP-LINK TD-W8980"; - - gpio-leds { - wifi2 { - label = "tdw8980:green:wlan5ghz"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio { - state_default: pinmux { - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain; - }; - }; -}; - -&pci0 { - status = "okay"; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/TDW89X0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/TDW89X0.dtsi deleted file mode 100644 index eabbc0257f..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/TDW89X0.dtsi +++ /dev/null @@ -1,272 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - /* the power led can't be controlled, use the wps led instead */ - led-boot = &wps; - led-failsafe = &wps; - - led-dsl = &dsl; - led-internet = &internet; - led-wifi = &wifi; - led-usb = &led_usb0; - led-usb2 = &led_usb2; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - /* - power is not controllable via gpio - */ - dsl: dsl { - label = "tdw89x0:green:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; - }; - internet: internet { - label = "tdw89x0:green:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; - }; - - led_usb0: usb0 { - label = "tdw89x0:green:usb"; - gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; - }; - led_usb2: usb2 { - label = "tdw89x0:green:usb2"; - gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; - }; - wps: wps { - label = "tdw89x0:green:wps"; - gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; - }; - }; - - wifi-leds { - compatible = "gpio-leds"; - - wifi: wifi { - label = "tdw89x0:green:wifi"; - gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - }; - - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&ath9k_cal 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io42"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&pcie0 { - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - ath9k: wifi@168c,002e { - compatible = "pci168c,002e"; - reg = <0 0 0 0 0>; - #gpio-cells = <2>; - gpio-controller; - qca,no-eeprom; - qca,disable-5ghz; - mtd-mac-address = <&ath9k_cal 0xf100>; - mtd-mac-address-increment = <2>; - }; - }; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <33250000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x7a0000>; - label = "firmware"; - }; - - partition@7c0000 { - reg = <0x7c0000 0x10000>; - label = "config"; - read-only; - }; - - ath9k_cal: partition@7d0000 { - reg = <0x7d0000 0x30000>; - label = "boardconfig"; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VG3503J.dts deleted file mode 100644 index e074147d66..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VG3503J.dts +++ /dev/null @@ -1,144 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9"; - model = "BT OpenReach VDSL Modem"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power2 { - label = "vg3503j:red:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "vg3503j:green:dsl"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - power_green: power { - label = "vg3503j:green:power"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>, - <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - lantiq,switch; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x20000>; - }; - - partition@20000 { - label = "firmware"; - reg = <0x20000 0x7d0000>; - }; - - partition@7f0000 { - label = "uboot-env"; - reg = <0x7f0000 0x10000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22.dtsi deleted file mode 100644 index 8db1ffbf81..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22.dtsi +++ /dev/null @@ -1,258 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &internet_green; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - dsl: dsl { - label = "vgv7510kw22:green:dsl"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - }; - - internet_red { - label = "vgv7510kw22:red:internet"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - - info_red { - label = "vgv7510kw22:red:info"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - - power_green: power { - label = "vgv7510kw22:green:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - info_green { - label = "vgv7510kw22:green:info"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - internet_green: internet_green { - label = "vgv7510kw22:green:internet"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - }; - - wifi: wifi { - label = "vgv7510kw22:green:wlan"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - - power_red: power2 { - label = "vgv7510kw22:red:power"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - }; - - phone { - label = "vgv7510kw22:green:telefon"; - gpios = <&gpio 29 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led1_pins>, - <&gphy1_led0_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "mii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci-rst { - lantiq,pins = "io21"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boardconfig: partition@fe0000 { - label = "board_config"; - reg = <0xfe0000 0x20000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@1814,3592 { - compatible = "pci1814,3592"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - }; -}; - -&pcie0 { - status = "disabled"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay - &gpio 31 GPIO_ACTIVE_HIGH //still unknown - &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22BRN.dts deleted file mode 100644 index 5a33121d72..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22BRN.dts +++ /dev/null @@ -1,65 +0,0 @@ -/dts-v1/; - -#include "VGV7510KW22.dtsi" - -/ { - compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; - model = "o2 Box 6431"; - - sram@1f000000 { - cgu@103000 { - lantiq,phy-clk-src = <0x2>; - }; - }; -}; - -&localbus { - flash@0 { - partitions { - partition@0 { - label = "Boot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "Configuration"; - reg = <0x40000 0x40000>; - read-only; - }; - - partition@80000 { - label = "Certificate"; - reg = <0x80000 0x20000>; - read-only; - }; - - partition@a0000 { - label = "Special_Area"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@c0000 { - compatible = "brnboot,root-selector"; - label = "Primary_Setting"; - reg = <0xc0000 0x20000>; - read-only; - }; - - partition@e0000 { - label = "Code_Image_0"; - reg = <0xe0000 0x780000>; - brnboot,root-id = <0x00>; - read-only; - }; - - partition@860000 { - label = "Code_Image_1"; - reg = <0x860000 0x780000>; - brnboot,root-id = <0x01>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22NOR.dts deleted file mode 100644 index 2accffaed7..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22NOR.dts +++ /dev/null @@ -1,31 +0,0 @@ -/dts-v1/; - -#include "VGV7510KW22.dtsi" - -/ { - compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; - model = "o2 Box 6431"; -}; - -&localbus { - flash@0 { - partitions { - partition@0 { - label = "uboot"; - reg = <0x0 0x60000>; /* 384 KiB */ - read-only; - }; - - partition@60000 { - label = "uboot-env"; - reg = <0x60000 0x20000>; /* 128 KiB */ - read-only; - }; - - partition@80000 { - label = "firmware"; - reg = <0x80000 0xf60000>; /* 15744 KiB */ - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519.dtsi deleted file mode 100644 index e82407d7c3..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519.dtsi +++ /dev/null @@ -1,295 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; - - chosen { - bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &broadband_green; - led-internet = &internet_green; - led-wifi = &wireless_green; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - eco { - label = "eco"; - gpios = <&gpio 41 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 45 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - wps { - label = "wps"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - eco { - label = "vgv7519:blue:eco"; - gpios = <&stp 2 GPIO_ACTIVE_LOW>; - }; - wps_red { - label = "vgv7519:red:wps"; - gpios = <&stp 3 GPIO_ACTIVE_LOW>; - }; - wps_green { - label = "vgv7519:green:wps"; - gpios = <&stp 4 GPIO_ACTIVE_LOW>; - }; - upgrade { - label = "vgv7519:blue:upgrade"; - gpios = <&stp 5 GPIO_ACTIVE_LOW>; - }; - tv { - label = "vgv7519:green:tv"; - gpios = <&stp 6 GPIO_ACTIVE_LOW>; - }; - internet_green: internet_green { - label = "vgv7519:green:internet"; - gpios = <&stp 7 GPIO_ACTIVE_LOW>; - }; - internet_red { - label = "vgv7519:red:internet"; - gpios = <&stp 8 GPIO_ACTIVE_LOW>; - }; - broadband_red { - label = "vgv7519:red:broadband"; - gpios = <&stp 9 GPIO_ACTIVE_LOW>; - }; - broadband_green: broadband_green { - label = "vgv7519:green:broadband"; - gpios = <&stp 10 GPIO_ACTIVE_LOW>; - }; - voice { - label = "vgv7519:green:voice"; - gpios = <&stp 11 GPIO_ACTIVE_LOW>; - }; - wireless_red { - label = "vgv7519:red:wireless"; - gpios = <&stp 12 GPIO_ACTIVE_LOW>; - }; - wireless_green: wireless_green { - label = "vgv7519:green:wireless"; - gpios = <&stp 13 GPIO_ACTIVE_LOW>; - }; - power_green: power2 { - label = "vgv7519:green:power"; - gpios = <&stp 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power { - label = "vgv7519:red:power"; - gpios = <&stp 15 GPIO_ACTIVE_LOW>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 32 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci-rst { - lantiq,pins = "io21"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x800000>, <1 0x800000 0x800000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boardconfig: partition@40000 { - label = "board_config"; - reg = <0x40000 0x10000>; - read-only; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@1814,3091 { - compatible = "pci1814,3091"; - reg = <0x7000 0 0 0 0>; - ralink,mtd-eeprom = <&boardconfig 0x410>; - ralink,mtd-eeprom-swap; - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - }; -}; - -&pcie0 { - status = "disabled"; -}; - -&stp { - status = "okay"; - lantiq,shadow = <0xffff>; - lantiq,groups = <0x3>; - lantiq,dsl = <0x0>; - lantiq,phy1 = <0x0>; - lantiq,phy2 = <0x0>; - /* lantiq,rising; */ -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay - &gpio 31 GPIO_ACTIVE_HIGH //still unknown - &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519BRN.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519BRN.dts deleted file mode 100644 index c51a44bb3d..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519BRN.dts +++ /dev/null @@ -1,70 +0,0 @@ -/dts-v1/; - -#include "VGV7519.dtsi" - -/ { - compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; - model = "KPN Experiabox V8"; -}; - -&localbus { - flash@0 { - partitions { - partition@0 { - label = "Boot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@50000 { - label = "Certificate"; - reg = <0x50000 0x10000>; - read-only; - }; - partition@60000 { - label = "Special_Area"; - reg = <0x60000 0x10000>; - read-only; - }; - - partition@70000 { - label = " Reserve_0"; - reg = <0x70000 0x10000>; - read-only; - }; - - partition@80000 { - label = "Code_Image_0"; - reg = <0x80000 0x780000>; - brnboot,root-id = <0x00>; - read-only; - }; - - partition@4000000 { - compatible = "brnboot,root-selector"; - label = "Primary_Setting"; - reg = <0x4000000 0x10000>; - read-only; - }; - - partition@4010000 { - label = "Configuration"; - reg = <0x4010000 0x60000>; - read-only; - }; - - partition@4070000 { - label = " Reserve_1"; - reg = <0x4070000 0x10000>; - read-only; - }; - - partition@4080000 { - label = "Code_Image_1"; - reg = <0x4080000 0x780000>; - brnboot,root-id = <0x01>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519NOR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519NOR.dts deleted file mode 100644 index aa6a96156f..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VGV7519NOR.dts +++ /dev/null @@ -1,29 +0,0 @@ -/dts-v1/; - -#include "VGV7519.dtsi" - -/ { - compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; - model = "KPN Experiabox V8"; -}; - -&localbus { - flash@0 { - partitions { - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - partition@60000 { - label = "uboot_env"; - reg = <0x60000 0x10000>; - read-only; - }; - partition@80000 { - label = "firmware"; - reg = <0x80000 0xf80000>; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dts deleted file mode 100644 index 8724e37b47..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dts +++ /dev/null @@ -1,92 +0,0 @@ -/dts-v1/; - -#include "VR200.dtsi" - -/ { - compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9"; - model = "TP-LINK Archer VR200"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &internet; - led-wifi = &wlan5g; - - led-usb = &led_usb; - led-usb2 = &led_usb; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - led { - label = "led"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "vr200:blue:power"; - gpios = <&gpio 46 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl: dsl { - label = "vr200:blue:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet: internet { - label = "vr200:blue:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "vr200:blue:usb"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - eth { - label = "vr200:blue:lan"; - gpios = <&gpio 40 GPIO_ACTIVE_LOW>; - }; - wlan { - label = "vr200:blue:wlan"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - wlan5g: wifi { - label = "vr200:blue:wlan5g"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - led_wps { - label = "vr200:blue:wps"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dtsi deleted file mode 100644 index 93178da7e2..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VR200.dtsi +++ /dev/null @@ -1,194 +0,0 @@ -#include "vr9.dtsi" - -#include -#include - -/ { - memory@0 { - device_type = "memory"; - reg = <0x0 0x7f00000>; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&romfile 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io42"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&pci0 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <33250000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0xf90000>; - label = "firmware"; - }; - - partition@fb0000 { - reg = <0xfb0000 0x10000>; - label = "radioDECT"; - read-only; - }; - - partition@fc0000 { - reg = <0xfc0000 0x10000>; - label = "config"; - read-only; - }; - - romfile: partition@fd0000 { - reg = <0xfd0000 0x10000>; - label = "romfile"; - read-only; - }; - - partition@fe0000 { - reg = <0xfe0000 0x10000>; - label = "rom"; - read-only; - }; - - partition@ff0000 { - reg = <0xff0000 0x10000>; - label = "radio"; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files/arch/mips/boot/dts/VR200v.dts deleted file mode 100644 index 34805bb9f0..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/VR200v.dts +++ /dev/null @@ -1,99 +0,0 @@ -/dts-v1/; - -#include "VR200.dtsi" - -/ { - compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9"; - model = "TP-LINK Archer VR200v"; - - chosen { - bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - - led-dsl = &dsl; - led-internet = &internet; - led-wifi = &wlan5g; - - led-usb = &led_usb; - led-usb2 = &led_usb; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect_paging { - label = "dect_paging"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - power: power { - label = "vr200v:blue:power"; - gpios = <&gpio 46 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - dsl: dsl { - label = "vr200v:blue:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet: internet { - label = "vr200v:blue:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "vr200v:blue:usb"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - eth { - label = "vr200v:blue:lan"; - gpios = <&gpio 40 GPIO_ACTIVE_LOW>; - }; - wlan { - label = "vr200v:blue:wlan"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - wlan5g: wifi { - label = "vr200v:blue:wlan5g"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - phone { - label = "vr200v:blue:phone"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay - &gpio 31 GPIO_ACTIVE_HIGH //still unknown - &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts deleted file mode 100644 index 5419215dc6..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts +++ /dev/null @@ -1,197 +0,0 @@ -/dts-v1/; - -#include "ar9.dtsi" - -#include - -/ { - compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9"; - model = "Buffalo WBMR-HP-G300H"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - - led-dsl = &dsl; - led-internet = &online_green; - led-usb = &led_usb; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - eject { - label = "eject"; - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - movie { - label = "movie"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power { - label = "wbmr:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - power_red: power2 { - label = "wbmr:red:power"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - security { - label = "wbmr:yellow:security"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - wifi: wifi { - label = "wbmr:green:wireless"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "wbmr:green:dsl"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - online_green: online { - label = "wbmr:green:internet"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - online2 { - label = "wbmr:red:internet"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - }; - movie { - label = "wbmr:blue:movie"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - led_usb: usb { - label = "wbmr:green:usb"; - gpios = <&gpio 28 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 36 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pci-in { - lantiq,groups = "req1"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - pci-out { - lantiq,groups = "gnt1"; - lantiq,output = <1>; - lantiq,pull = <0>; - }; - pci_rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&gsw { - phy-mode = "rgmii"; - mtd-mac-address = <&boardconfig 0x10024>; -}; - -&pci0 { - status = "okay"; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x60000 0x1f20000>; - }; - - boardconfig: partition@1fc0000 { - label = "board"; - reg = <0x1fc0000 0x20000>; - read-only; - }; - - partition@1fe0000 { - label = "calibration"; - reg = <0x1fe0000 0x20000>; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/WBMR300.dts b/target/linux/lantiq/files/arch/mips/boot/dts/WBMR300.dts deleted file mode 100644 index 4631ad4ffe..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/WBMR300.dts +++ /dev/null @@ -1,312 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include -#include - -/ { - compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9"; - model = "Buffalo WBMR-300HPD"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_g; - led-failsafe = &diag_r; - led-running = &power_g; - led-upgrade = &power_g; - - led-dsl = &dsl; - led-internet = &router_g; - led-wifi = &wifi_g; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio 31 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - auto { - label = "auto"; - gpios = <&gpio 48 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - router { - label = "router"; - gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - diag_r: diag_r { - label = "wbmr300:red:diag"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default_state = "off"; - }; - - wifi_g: wifi_g { - label = "wbmr300:green:wifi"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - - dsl: dsl { - label = "dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; - }; - - router_y: router_y { - label = "wbmr300:yellow:router"; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - - wifi_y: wifi_y { - label = "wbmr300:yellow:wifi"; - gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; - }; - - lan1: lan1 { - label = "wbmr300:green:lan1"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - wan: wan { - label = "wbmr300:green:wan"; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - }; - - lan3: lan3 { - label = "wbmr300:green:lan3"; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - }; - - lan2: lan2 { - label = "wbmr300:green:lan2"; - gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; - }; - - internet_g: internet_g { - label = "wbmr300:green:internet"; - gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; - }; - - internet_y: internet_y { - label = "wbmr300:yellow:internet"; - gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - }; - - router_g: router_g { - label = "wbmr300:green:router"; - gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; - }; - - power_g: power_g { - label = "wbmr300:green:power"; - gpios = <&gpio 49 GPIO_ACTIVE_HIGH>; - }; - }; - - usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - - regulator-name = "USB_VBUS"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = ; -}; - -&gphy1 { - lantiq,gphy-mode = ; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io42"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; -}; - -&spi { - status = "okay"; - - flash@4 { - compatible = "jedec,spi-nor"; - reg = <4>; - spi-max-frequency = <20000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x10000>; - label = "u-boot"; - read-only; - }; - - partition@10000 { - reg = <0x10000 0x10000>; - label = "gphyfirmware"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x80000>; - label = "dsl_fw"; - }; - - partition@de0000 { - reg = <0xa0000 0xf40000>; - label = "firmware"; - }; - - partition@fe0000 { - reg = <0xfe0000 0x10000>; - label = "sysconfig"; - read-only; - }; - - partition@ff0000 { - reg = <0xff0000 0x2000>; - label = "ubootconfig"; - }; - - partition@ff3000 { - reg = <0xff3000 0x2000>; - label = "board_config"; - read-only; - }; - }; - }; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; - -&usb1 { - status = "okay"; - vbus-supply = <&usb_vbus>; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/amazonse.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/amazonse.dtsi deleted file mode 100644 index 496150b7a7..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/amazonse.dtsi +++ /dev/null @@ -1,247 +0,0 @@ -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xway", "lantiq,ase"; - - aliases { - serial0 = &asc1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips4Kc"; - reg = <0>; - }; - }; - - reboot { - compatible = "syscon-reboot"; - - regmap = <&rcu0>; - offset = <0x10>; - mask = <0x40000000>; - }; - - biu@1f800000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,biu", "simple-bus"; - reg = <0x1f800000 0x800000>; - ranges = <0x0 0x1f800000 0x7fffff>; - - icu0: icu@80200 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; - }; - - watchdog@803f0 { - compatible = "lantiq,wdt"; - reg = <0x803f0 0x10>; - }; - }; - - sram@1f000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sram", "simple-bus"; - reg = <0x1f000000 0x800000>; - ranges = <0x0 0x1f000000 0x7fffff>; - - eiu0: eiu@101000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,eiu-xway"; - reg = <0x101000 0x1000>; - interrupt-parent = <&icu0>; - lantiq,eiu-irqs = <29 30 31>; - }; - - pmu0: pmu@102000 { - compatible = "lantiq,pmu-xway"; - reg = <0x102000 0x1000>; - }; - - cgu0: cgu@103000 { - compatible = "lantiq,cgu-xway"; - reg = <0x103000 0x1000>; - #clock-cells = <1>; - }; - - rcu0: rcu@203000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,ase-rcu", "simple-mfd", "syscon"; - reg = <0x203000 0x1000>; - ranges = <0x0 0x203000 0x100>; - big-endian; - - reset: reset-controller@10 { - compatible = "lantiq,danube-reset"; - reg = <0x10 4>, <0x14 4>; - - #reset-cells = <2>; - }; - - usb_phy: usb2-phy@18 { - compatible = "lantiq,ase-usb2-phy"; - reg = <0x18 4>; - status = "disabled"; - - resets = <&reset 4 4>; - reset-names = "ctrl"; - #phy-cells = <0>; - }; - }; - }; - - fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xeefffff>; - reg = <0x10000000 0xef00000>; - - localbus: localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - }; - - spi: spi@e100800 { - compatible = "lantiq,ase-spi"; - reg = <0xe100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <24 25 26>; - interrupt-names = "spi_rx", "spi_tx", "spi_err", - "spi_frm"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; - status = "disabled"; - }; - - gptu@e100a00 { - compatible = "lantiq,gptu-xway"; - reg = <0xe100a00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <33 34 35 36 37 38>; - }; - - gpio: pinmux@e100b10 { - compatible = "lantiq,ase-pinctrl"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe100b10 0xa0>; - - asc_pins: asc-pins { - mux { - lantiq,groups = "asc"; - lantiq,function = "asc"; - }; - }; - - mdio_pins: mdio { - mux { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - }; - - spi_pins: spi { - mux-0 { - lantiq,groups = "spi_di"; - lantiq,function = "spi"; - }; - mux-1 { - lantiq,groups = "spi_do", "spi_clk"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - - spi_cs4_pins: spi-cs4 { - mux { - lantiq,groups = "spi_cs4"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - }; - - asc1: serial@e100c00 { - compatible = "lantiq,asc"; - reg = <0xe100c00 0x400>; - interrupt-parent = <&icu0>; - interrupts = <72 74 75>; - pinctrl-0 = <&asc_pins>; - pinctrl-names = "default"; - }; - - mei@e116000 { - compatible = "lantiq,mei-xway"; - reg = <0xe116000 0x400>; - interrupt-parent = <&icu0>; - interrupts = <81>; - }; - - usb: usb@e101000 { - compatible = "lantiq,ase-usb"; - reg = <0xe101000 0x1000 - 0xe120000 0x3f000>; - interrupt-parent = <&icu0>; - interrupts = <39>; - dr_mode = "host"; - phys = <&usb_phy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - dma0: dma@e104100 { - compatible = "lantiq,dma-xway"; - reg = <0xe104100 0x800>; - }; - - ebu0: ebu@e105300 { - compatible = "lantiq,ebu-xway"; - reg = <0xe105300 0x100>; - }; - - ppe@e234000 { - compatible = "lantiq,ppe-ase"; - reg = <0xe234000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <85>; - }; - - gsw: etop@e180000 { - compatible = "lantiq,etop-xway"; - reg = <0xe180000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <105 109>; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - }; - - adsl { - compatible = "lantiq,adsl-ase"; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ar9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/ar9.dtsi deleted file mode 100644 index 344c2f4fa8..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/ar9.dtsi +++ /dev/null @@ -1,404 +0,0 @@ -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xway", "lantiq,ar9"; - - aliases { - serial0 = &asc1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips34K"; - reg = <0>; - }; - }; - - reboot { - compatible = "syscon-reboot"; - - regmap = <&rcu0>; - offset = <0x10>; - mask = <0x40000000>; - }; - - biu@1f800000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,biu", "simple-bus"; - reg = <0x1f800000 0x800000>; - ranges = <0x0 0x1f800000 0x7fffff>; - - icu0: icu@80200 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; - }; - - watchdog@803f0 { - compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt"; - reg = <0x803f0 0x10>; - - regmap = <&rcu0>; - }; - }; - - sram@1f000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sram", "simple-bus"; - reg = <0x1f000000 0x800000>; - ranges = <0x0 0x1f000000 0x7fffff>; - - eiu0: eiu@101000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,eiu-xway"; - reg = <0x101000 0x1000>; - interrupt-parent = <&icu0>; - lantiq,eiu-irqs = <166 135 66 40 41 42>; - }; - - pmu0: pmu@102000 { - compatible = "lantiq,pmu-xway"; - reg = <0x102000 0x1000>; - }; - - cgu0: cgu@103000 { - compatible = "lantiq,cgu-xway"; - reg = <0x103000 0x1000>; - #clock-cells = <1>; - }; - - rcu0: rcu@203000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon"; - reg = <0x203000 0x1000>; - ranges = <0x0 0x203000 0x100>; - big-endian; - - reset: reset-controller@10 { - compatible = "lantiq,xrx100-reset", "lantiq,danube-reset"; - reg = <0x10 4>, <0x14 4>; - - #reset-cells = <2>; - }; - - usb_phy0: usb2-phy@18 { - compatible = "lantiq,xrx100-usb2-phy"; - reg = <0x18 4>; - status = "disabled"; - - resets = <&reset 4 4>; - reset-names = "ctrl"; - #phy-cells = <0>; - }; - - usb_phy1: usb2-phy@34 { - compatible = "lantiq,xrx100-usb2-phy"; - reg = <0x34 4>; - status = "disabled"; - - resets = <&reset 28 28>; - reset-names = "ctrl"; - #phy-cells = <0>; - }; - }; - }; - - fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xeefffff>; - reg = <0x10000000 0xef00000>; - - localbus: localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - }; - - gptu@e100a00 { - compatible = "lantiq,gptu-xway"; - reg = <0xe100a00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <126 127 128 129 130 131>; - }; - - asc0: serial@e100400 { - compatible = "lantiq,asc"; - reg = <0xe100400 0x400>; - interrupt-parent = <&icu0>; - interrupts = <104 105 106>; - status = "disabled"; - }; - - spi: spi@e100800 { - compatible = "lantiq,xrx100-spi"; - reg = <0xe100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <22 23 24>; - interrupt-names = "spi_rx", "spi_tx", "spi_err", - "spi_frm"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; - status = "disabled"; - }; - - gpio: pinmux@e100b10 { - compatible = "lantiq,xrx100-pinctrl"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe100b10 0xa0>; - - mdio_pins: mdio { - mux { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - }; - - nand_pins: nand { - mux-0 { - lantiq,groups = "nand cle", "nand ale", - "nand rd"; - lantiq,function = "ebu"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - mux-1 { - lantiq,groups = "nand rdy"; - lantiq,function = "ebu"; - lantiq,output = <0>; - lantiq,pull = <2>; - }; - }; - - nand_cs1_pins: nand-cs1 { - mux { - lantiq,groups = "nand cs1"; - lantiq,function = "ebu"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - }; - - pci_gnt1_pins: pci-gnt1 { - lantiq,groups = "gnt1"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_gnt2_pins: pci-gnt2 { - lantiq,groups = "gnt2"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_gnt3_pins: pci-gnt3 { - lantiq,groups = "gnt3"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_gnt4_pins: pci-gnt4 { - lantiq,groups = "gnt4"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_req1_pins: pci-req1 { - lantiq,groups = "req1"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - pci_req2_pins: pci-req2 { - lantiq,groups = "req2"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - pci_req3_pins: pci-req3 { - lantiq,groups = "req3"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - pci_req4_pins: pci-req4 { - lantiq,groups = "req4"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - spi_pins: spi { - mux-0 { - lantiq,groups = "spi_di"; - lantiq,function = "spi"; - }; - mux-1 { - lantiq,groups = "spi_do", "spi_clk"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - - spi_cs4_pins: spi-cs4 { - mux { - lantiq,groups = "spi_cs4"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - - stp_pins: stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; - - stp: stp@e100bb0 { - #gpio-cells = <2>; - compatible = "lantiq,gpio-stp-xway"; - gpio-controller; - reg = <0xe100bb0 0x40>; - - pinctrl-0 = <&stp_pins>; - pinctrl-names = "default"; - - status = "disabled"; - }; - - asc1: serial@e100c00 { - compatible = "lantiq,asc"; - reg = <0xe100c00 0x400>; - interrupt-parent = <&icu0>; - interrupts = <112 113 114>; - }; - - usb0: usb@e101000 { - compatible = "lantiq,arx100-usb"; - reg = <0xe101000 0x1000 - 0xe120000 0x3f000>; - interrupt-parent = <&icu0>; - interrupts = <62 91>; - dr_mode = "host"; - phys = <&usb_phy0>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - usb1: usb@e106000 { - compatible = "lantiq,arx100-usb"; - reg = <0xe106000 0x1000 - 0xe1e0000 0x3f000>; - interrupt-parent = <&icu0>; - interrupts = <91>; - dr_mode = "host"; - phys = <&usb_phy1>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - deu@e103100 { - compatible = "lantiq,deu-arx100"; - reg = <0xe103100 0xf00>; - }; - - dma0: dma@e104100 { - compatible = "lantiq,dma-xway"; - reg = <0xe104100 0x800>; - }; - - ebu0: ebu@e105300 { - compatible = "lantiq,ebu-xway"; - reg = <0xe105300 0x100>; - }; - - mei@e116000 { - compatible = "lantiq,mei-xway"; - reg = <0xe116000 0x9c>; - interrupt-parent = <&icu0>; - interrupts = <63>; - }; - - gsw: etop@e180000 { - compatible = "lantiq,etop-xway"; - reg = <0xe180000 0x40000 - 0xe108000 0x200>; - interrupt-parent = <&icu0>; - interrupts = <73 72>; - mac-address = [ 00 11 22 33 44 55 ]; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ppe@e234000 { - compatible = "lantiq,ppe-arx100"; - reg = <0xe234000 0x3ffd>; - interrupt-parent = <&icu0>; - interrupts = <96>; - }; - - pci0: pci@e105400 { - status = "disabled"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "lantiq,pci-xway"; - bus-range = <0x0 0x0>; - ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ - reg = <0x7000000 0x8000 /* config space */ - 0xe105400 0x400>; /* pci bridge */ - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; - req-mask = <0x1>; - }; - }; - - adsl { - compatible = "lantiq,adsl-arx100"; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/danube.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/danube.dtsi deleted file mode 100644 index 6ee6dda571..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/danube.dtsi +++ /dev/null @@ -1,315 +0,0 @@ -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xway", "lantiq,danube"; - - aliases { - serial0 = &asc1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips24Kc"; - reg = <0>; - }; - }; - - reboot { - compatible = "syscon-reboot"; - - regmap = <&rcu0>; - offset = <0x10>; - mask = <0x40000000>; - }; - - biu@1f800000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,biu", "simple-bus"; - reg = <0x1f800000 0x800000>; - ranges = <0x0 0x1f800000 0x7fffff>; - - icu0: icu@80200 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; - }; - - watchdog@803f0 { - compatible = "lantiq,wdt"; - reg = <0x803f0 0x10>; - }; - }; - - sram@1f000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sram", "simple-bus"; - reg = <0x1f000000 0x800000>; - ranges = <0x0 0x1f000000 0x7fffff>; - - eiu0: eiu@101000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,eiu-xway"; - reg = <0x101000 0x1000>; - interrupt-parent = <&icu0>; - lantiq,eiu-irqs = <166 135 66>; - }; - - pmu0: pmu@102000 { - compatible = "lantiq,pmu-xway"; - reg = <0x102000 0x1000>; - }; - - cgu0: cgu@103000 { - compatible = "lantiq,cgu-xway"; - reg = <0x103000 0x1000>; - #clock-cells = <1>; - }; - - vmmc: vmmc@107000 { - status = "disabled"; - compatible = "lantiq,vmmc-xway"; - reg = <0x107000 0x400>; - interrupt-parent = <&icu0>; - interrupts = <150 151 152 153 154 155>; - }; - - rcu0: rcu@203000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,danube-rcu", "simple-mfd", "syscon"; - reg = <0x203000 0x1000>; - ranges = <0x0 0x203000 0x100>; - big-endian; - - reset: reset-controller@10 { - compatible = "lantiq,danube-reset"; - reg = <0x10 4>, <0x14 4>; - - #reset-cells = <2>; - }; - - usb_phy: usb2-phy@18 { - compatible = "lantiq,danube-usb2-phy"; - reg = <0x18 4>; - status = "disabled"; - - resets = <&reset 4 4>; - reset-names = "ctrl"; - #phy-cells = <0>; - }; - }; - }; - - fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xeefffff>; - reg = <0x10000000 0xef00000>; - - localbus: localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - }; - - gptu@e100a00 { - compatible = "lantiq,gptu-xway"; - reg = <0xe100a00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <126 127 128 129 130 131>; - }; - - gpios: stp@e100bb0 { - #gpio-cells = <2>; - compatible = "lantiq,gpio-stp-xway"; - gpio-controller; - reg = <0xe100bb0 0x40>; - - pinctrl-0 = <&stp_pins>; - pinctrl-names = "default"; - - lantiq,shadow = <0xfff>; - lantiq,groups = <0x3>; - status = "disabled"; - }; - - asc0: serial@e100400 { - compatible = "lantiq,asc"; - reg = <0xe100400 0x400>; - interrupt-parent = <&icu0>; - interrupts = <104 105 106>; - status = "disabled"; - }; - - gpio: pinmux@e100b10 { - compatible = "lantiq,danube-pinctrl"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe100b10 0xa0>; - - nand_pins: nand { - mux-0 { - lantiq,groups = "nand cle", "nand ale", - "nand rd"; - lantiq,function = "ebu"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - mux-1 { - lantiq,groups = "nand rdy"; - lantiq,function = "ebu"; - lantiq,output = <0>; - lantiq,pull = <2>; - }; - }; - - nand_cs1_pins: nand-cs1 { - mux { - lantiq,groups = "nand cs1"; - lantiq,function = "ebu"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - }; - - pci_gnt1_pins: pci-gnt1 { - lantiq,groups = "gnt1"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_gnt2_pins: pci-gnt2 { - lantiq,groups = "gnt2"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_req1_pins: pci-req1 { - lantiq,groups = "req1"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - pci_req2_pins: pci-req2 { - lantiq,groups = "req2"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - stp_pins: stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; - - asc1: serial@e100c00 { - compatible = "lantiq,asc"; - reg = <0xe100c00 0x400>; - interrupt-parent = <&icu0>; - interrupts = <112 113 114>; - }; - - usb: usb@e101000 { - compatible = "lantiq,danube-usb"; - reg = <0xe101000 0x1000 - 0xe120000 0x3f000>; - interrupt-parent = <&icu0>; - interrupts = <62>; - dr_mode = "host"; - phys = <&usb_phy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - deu@e103100 { - compatible = "lantiq,deu-danube"; - reg = <0xe103100 0xf00>; - }; - - dma0: dma@e104100 { - compatible = "lantiq,dma-xway"; - reg = <0xe104100 0x800>; - }; - - ebu0: ebu@e105300 { - compatible = "lantiq,ebu-xway"; - reg = <0xe105300 0x100>; - }; - - mei@e116000 { - compatible = "lantiq,mei-xway"; - reg = <0xe116000 0x400>; - interrupt-parent = <&icu0>; - interrupts = <63>; - }; - - gsw: etop@e180000 { - compatible = "lantiq,etop-xway"; - reg = <0xe180000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <73 78>; - mac-address = [ 00 11 22 33 44 55 ]; - }; - - ppe@e234000 { - compatible = "lantiq,ppe-danube"; - reg = <0xe234000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <96>; - }; - - pci0: pci@e105400 { - status = "disabled"; - - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "lantiq,pci-xway"; - bus-range = <0x0 0x0>; - ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ - reg = <0x7000000 0x8000 /* config space */ - 0xe105400 0x400>; /* pci bridge */ - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ - req-mask = <0x1>; /* GNT1 */ - }; - }; - - adsl { - compatible = "lantiq,adsl-danube"; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/falcon-sflash-16M.dtsi deleted file mode 100644 index b35f70b646..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/falcon-sflash-16M.dtsi +++ /dev/null @@ -1,41 +0,0 @@ - -&ebu_cs0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sflash-falcon", "simple-bus"; - - flash@0 { - compatible = "spansion,s25fl129p0", "spansion,s25fl129p1"; - reg = <0 0>; - linux,mtd-name = "sflash"; - spi-max-frequency = <80000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x40000>; - label = "uboot"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x80000>; - label = "uboot_env"; - }; - - partition@c0000 { - reg = <0xc0000 0x740000>; - label = "image0"; - }; - - partition@800000 { - reg = <0x800000 0x800000>; - label = "image1"; - }; - }; - }; -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/falcon.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/falcon.dtsi deleted file mode 100644 index dada3bcff2..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/falcon.dtsi +++ /dev/null @@ -1,366 +0,0 @@ -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,falcon"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips34kc"; - reg = <0>; - }; - }; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - ebu_cs0: localbus@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,localbus", "simple-bus"; - reg = <0x10000000 0x4000000>; - ranges = <0x0 0x10000000 0x4000000>; - }; - ebu_cs1: localbus@14000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,localbus", "simple-bus"; - reg = <0x14000000 0x4000000>; - ranges = <0x0 0x14000000 0x4000000>; - }; - - ebu@18000000 { - compatible = "lantiq,ebu-falcon"; - reg = <0x18000000 0x100>; - }; - - sbs2@1d000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sysb2", "simple-bus"; - reg = <0x1d000000 0x1000000>; - ranges = <0x0 0x1d000000 0x1000000>; - - clock_sysgpe: clock-controller@700000 { - compatible = "lantiq,sysgpe-falcon"; - reg = <0x700000 0x100>; - #clock-cells = <1>; - }; - - mps@4000 { - compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100"; - reg = <0x4000 0x1000>; - interrupt-parent = <&icu0>; - interrupts = <154 155>; - lantiq,mbx = <&mpsmbx>; - }; - - gpio0: gpio@810000 { - compatible = "lantiq,falcon-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&icu0>; - interrupts = <44>; - reg = <0x810000 0x80>; - clocks = <&clock_syseth 16>; - }; - - gpio2: gpio@810100 { - compatible = "lantiq,falcon-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&icu0>; - interrupts = <46>; - reg = <0x810100 0x80>; - clocks = <&clock_syseth 17>; - }; - - clock_syseth: clock-controller@b00000 { - compatible = "lantiq,syseth-falcon"; - reg = <0xb00000 0x100>; - #clock-cells = <1>; - }; - - pad@b01000 { - compatible = "lantiq,pad-falcon"; - reg = <0xb01000 0x100>; - lantiq,bank = <0>; - clocks = <&clock_syseth 20>; - }; - - pad@b02000 { - compatible = "lantiq,pad-falcon"; - reg = <0xb02000 0x100>; - lantiq,bank = <2>; - clocks = <&clock_syseth 21>; - }; - }; - - fpi@1e000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - reg = <0x1e000000 0x1000000>; - ranges = <0x0 0x1e000000 0x1000000>; - - serial1: serial@100b00 { - status = "disabled"; - compatible = "lantiq,asc"; - reg = <0x100b00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <112 113 114>; - line = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&asc1_pins>; - clocks = <&clock_sys1 11>; - }; - - serial0: serial@100c00 { - compatible = "lantiq,asc"; - reg = <0x100c00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <104 105 106>; - line = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&asc0_pins>; - clocks = <&clock_sys1 12>; - }; - - spi: spi@100d00 { - status = "disabled"; - compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc"; - interrupts = <22 23 24 25>; - interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x100d00 0x100>; - interrupt-parent = <&icu0>; - clocks = <&clock_sys1 13>; - base_cs = <1>; - num_cs = <2>; - }; - - gptc@100e00 { - compatible = "lantiq,gptc-falcon"; - reg = <0x100e00 0x100>; - }; - - i2c: i2c@200000 { - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,lantiq-i2c"; - reg = <0x200000 0x10000>; - interrupt-parent = <&icu0>; - interrupts = <18 19 20 21>; - gpios = <&gpio1 7 0 &gpio1 8 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_pins>; - clocks = <&clock_sys1 14>; - }; - - gpio1: gpio@800100 { - compatible = "lantiq,falcon-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&icu0>; - interrupts = <45>; - reg = <0x800100 0x100>; - clocks = <&clock_sys1 16>; - }; - - gpio3: gpio@800200 { - compatible = "lantiq,falcon-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&icu0>; - interrupts = <47>; - reg = <0x800200 0x100>; - clocks = <&clock_sys1 17>; - }; - - gpio4: gpio@800300 { - compatible = "lantiq,falcon-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&icu0>; - interrupts = <48>; - reg = <0x800300 0x100>; - clocks = <&clock_sys1 18>; - }; - - pad@800400 { - compatible = "lantiq,pad-falcon"; - reg = <0x800400 0x100>; - lantiq,bank = <1>; - clocks = <&clock_sys1 20>; - }; - - pad@800500 { - compatible = "lantiq,pad-falcon"; - reg = <0x800500 0x100>; - lantiq,bank = <3>; - clocks = <&clock_sys1 21>; - }; - - pad@800600 { - compatible = "lantiq,pad-falcon"; - reg = <0x800600 0x100>; - lantiq,bank = <4>; - clocks = <&clock_sys1 22>; - }; - - status@802000 { - compatible = "lantiq,status-falcon"; - reg = <0x802000 0x80>; - }; - - clock_sys1: clock-controller@f00000 { - compatible = "lantiq,sys1-falcon"; - reg = <0xf00000 0x100>; - #clock-cells = <1>; - }; - }; - - sbs0@1f000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - reg = <0x1f000000 0x400000>; - ranges = <0x0 0x1f000000 0x400000>; - - mpsmbx: mpsmbx@200000 { - reg = <0x200000 0x200>; - }; - }; - - biu@1f800000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,biu", "simple-bus"; - reg = <0x1f800000 0x800000>; - ranges = <0x0 0x1f800000 0x800000>; - - icu0: icu@80200 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; - }; - - watchdog@803f0 { - compatible = "lantiq,wdt"; - reg = <0x803f0 0x10>; - }; - }; - - pinctrl { - compatible = "lantiq,pinctrl-falcon"; - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinctrl0 { - /*ntr { - lantiq,groups = "ntr8k"; - lantiq,function = "ntr"; - };*/ - hrst { - lantiq,groups = "hrst"; - lantiq,function = "rst"; - }; - }; - - asc0_pins: asc0 { - asc0 { - lantiq,groups = "asc0"; - lantiq,function = "asc"; - }; - }; - asc1_pins: asc1 { - asc1 { - lantiq,groups = "asc1"; - lantiq,function = "asc"; - }; - }; - i2c_pins: i2c_pins { - i2c_pins { - lantiq,groups = "i2c"; - lantiq,function = "i2c"; - }; - }; - bootled_pins: bootled { - bootled { - lantiq,groups = "bootled"; - lantiq,function = "led"; - }; - }; - ntr_ntr8k: ntr8k { - ntr8k { - lantiq,groups = "ntr8k"; - lantiq,function = "ntr"; - }; - }; - ntr_pps: pps { - pps { - lantiq,groups = "pps"; - lantiq,function = "ntr"; - }; - }; - ntr_gpio: gpio { - gpio { - lantiq,pins = "io5"; - lantiq,mux = <1>; - lantiq,output = <0>; - }; - }; - slic_pins: slic { - slic { - lantiq,groups = "slic"; - lantiq,function = "slic"; - }; - }; - }; - - pinselect-ntr { - compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr"; - pinctrl-names = "ntr8k", "pps", "gpio"; - pinctrl-0 = <&ntr_ntr8k>; - pinctrl-1 = <&ntr_pps>; - pinctrl-2 = <&ntr_gpio>; - }; - - pinselect-asc1 { - compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1"; - pinctrl-names = "default", "asc1"; - pinctrl-0 = <&slic_pins>; - pinctrl-1 = <&asc1_pins>; - }; - -}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi new file mode 100644 index 0000000000..496150b7a7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse.dtsi @@ -0,0 +1,247 @@ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,ase"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips4Kc"; + reg = <0>; + }; + }; + + reboot { + compatible = "syscon-reboot"; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0x40000000>; + }; + + biu@1f800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x7fffff>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803f0 { + compatible = "lantiq,wdt"; + reg = <0x803f0 0x10>; + }; + }; + + sram@1f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1f000000 0x800000>; + ranges = <0x0 0x1f000000 0x7fffff>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <29 30 31>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,ase-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x1000>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + reset: reset-controller@10 { + compatible = "lantiq,danube-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + usb_phy: usb2-phy@18 { + compatible = "lantiq,ase-usb2-phy"; + reg = <0x18 4>; + status = "disabled"; + + resets = <&reset 4 4>; + reset-names = "ctrl"; + #phy-cells = <0>; + }; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xeefffff>; + reg = <0x10000000 0xef00000>; + + localbus: localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + spi: spi@e100800 { + compatible = "lantiq,ase-spi"; + reg = <0xe100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <24 25 26>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; + status = "disabled"; + }; + + gptu@e100a00 { + compatible = "lantiq,gptu-xway"; + reg = <0xe100a00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <33 34 35 36 37 38>; + }; + + gpio: pinmux@e100b10 { + compatible = "lantiq,ase-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe100b10 0xa0>; + + asc_pins: asc-pins { + mux { + lantiq,groups = "asc"; + lantiq,function = "asc"; + }; + }; + + mdio_pins: mdio { + mux { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + + spi_pins: spi { + mux-0 { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + mux-1 { + lantiq,groups = "spi_do", "spi_clk"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + + spi_cs4_pins: spi-cs4 { + mux { + lantiq,groups = "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + asc1: serial@e100c00 { + compatible = "lantiq,asc"; + reg = <0xe100c00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <72 74 75>; + pinctrl-0 = <&asc_pins>; + pinctrl-names = "default"; + }; + + mei@e116000 { + compatible = "lantiq,mei-xway"; + reg = <0xe116000 0x400>; + interrupt-parent = <&icu0>; + interrupts = <81>; + }; + + usb: usb@e101000 { + compatible = "lantiq,ase-usb"; + reg = <0xe101000 0x1000 + 0xe120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <39>; + dr_mode = "host"; + phys = <&usb_phy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + dma0: dma@e104100 { + compatible = "lantiq,dma-xway"; + reg = <0xe104100 0x800>; + }; + + ebu0: ebu@e105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xe105300 0x100>; + }; + + ppe@e234000 { + compatible = "lantiq,ppe-ase"; + reg = <0xe234000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <85>; + }; + + gsw: etop@e180000 { + compatible = "lantiq,etop-xway"; + reg = <0xe180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <105 109>; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + }; + + adsl { + compatible = "lantiq,adsl-ase"; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_allnet_all0333cj.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_allnet_all0333cj.dts new file mode 100644 index 0000000000..c5dd1600f4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_allnet_all0333cj.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +#include "amazonse.dtsi" + +/ { + compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase"; + model = "Allnet ALL0333CJ DSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &online_green; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1000000>; + }; + + leds { + compatible = "gpio-leds"; + + /* power led: red=off, green=on */ + power: power { + label = "all0333cj:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + lan: lan { + label = "all0333cj:green:lan"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + dsl: dsl { + label = "all0333cj:green:dsl"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + online_green: online { + label = "all0333cj:green:online"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + online_red { + label = "all0333cj:red:online"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + keys_in { + lantiq,pins = "io0",/* "io25", */"io29"; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x400000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "firmware"; + reg = <0x10000 0x3ef200>; + }; + + partition@3ff200 { + label = "uboot_env"; + reg = <0x3ff200 0xc00>; + read-only; + }; + + partition@3ffe00 { + label = "dummy_bits"; + reg = <0x3ffe00 0x200>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts new file mode 100644 index 0000000000..943b00f898 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts @@ -0,0 +1,153 @@ +/dts-v1/; + +#include "amazonse.dtsi" + +#include + +/ { + compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase"; + model = "Netgear DGN1000B"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &online_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + dsl: dsl { + label = "dgn1000b:green:dsl"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + online_green: online { + label = "dgn1000b:green:online"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + online2 { + label = "dgn1000b:red:online"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + wps { + label = "dgn1000b:green:wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + power: power { + label = "dgn1000b:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + /* + power red is missing + */ + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + keys_in { + lantiq,pins = "io0",/* "io25", */"io29"; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mac-address = [ 00 11 22 33 44 55 ]; +}; + +&spi { + status = "okay"; + + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <5000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi new file mode 100644 index 0000000000..344c2f4fa8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9.dtsi @@ -0,0 +1,404 @@ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,ar9"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips34K"; + reg = <0>; + }; + }; + + reboot { + compatible = "syscon-reboot"; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0x40000000>; + }; + + biu@1f800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x7fffff>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803f0 { + compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt"; + reg = <0x803f0 0x10>; + + regmap = <&rcu0>; + }; + }; + + sram@1f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1f000000 0x800000>; + ranges = <0x0 0x1f000000 0x7fffff>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66 40 41 42>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x1000>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + reset: reset-controller@10 { + compatible = "lantiq,xrx100-reset", "lantiq,danube-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx100-usb2-phy"; + reg = <0x18 4>; + status = "disabled"; + + resets = <&reset 4 4>; + reset-names = "ctrl"; + #phy-cells = <0>; + }; + + usb_phy1: usb2-phy@34 { + compatible = "lantiq,xrx100-usb2-phy"; + reg = <0x34 4>; + status = "disabled"; + + resets = <&reset 28 28>; + reset-names = "ctrl"; + #phy-cells = <0>; + }; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xeefffff>; + reg = <0x10000000 0xef00000>; + + localbus: localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@e100a00 { + compatible = "lantiq,gptu-xway"; + reg = <0xe100a00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + asc0: serial@e100400 { + compatible = "lantiq,asc"; + reg = <0xe100400 0x400>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + status = "disabled"; + }; + + spi: spi@e100800 { + compatible = "lantiq,xrx100-spi"; + reg = <0xe100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; + status = "disabled"; + }; + + gpio: pinmux@e100b10 { + compatible = "lantiq,xrx100-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe100b10 0xa0>; + + mdio_pins: mdio { + mux { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + + nand_pins: nand { + mux-0 { + lantiq,groups = "nand cle", "nand ale", + "nand rd"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + mux-1 { + lantiq,groups = "nand rdy"; + lantiq,function = "ebu"; + lantiq,output = <0>; + lantiq,pull = <2>; + }; + }; + + nand_cs1_pins: nand-cs1 { + mux { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + + pci_gnt1_pins: pci-gnt1 { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_gnt2_pins: pci-gnt2 { + lantiq,groups = "gnt2"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_gnt3_pins: pci-gnt3 { + lantiq,groups = "gnt3"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_gnt4_pins: pci-gnt4 { + lantiq,groups = "gnt4"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_req1_pins: pci-req1 { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + pci_req2_pins: pci-req2 { + lantiq,groups = "req2"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + pci_req3_pins: pci-req3 { + lantiq,groups = "req3"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + pci_req4_pins: pci-req4 { + lantiq,groups = "req4"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + spi_pins: spi { + mux-0 { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + mux-1 { + lantiq,groups = "spi_do", "spi_clk"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + + spi_cs4_pins: spi-cs4 { + mux { + lantiq,groups = "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + + stp_pins: stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; + + stp: stp@e100bb0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xe100bb0 0x40>; + + pinctrl-0 = <&stp_pins>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + asc1: serial@e100c00 { + compatible = "lantiq,asc"; + reg = <0xe100c00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + usb0: usb@e101000 { + compatible = "lantiq,arx100-usb"; + reg = <0xe101000 0x1000 + 0xe120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62 91>; + dr_mode = "host"; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@e106000 { + compatible = "lantiq,arx100-usb"; + reg = <0xe106000 0x1000 + 0xe1e0000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <91>; + dr_mode = "host"; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + deu@e103100 { + compatible = "lantiq,deu-arx100"; + reg = <0xe103100 0xf00>; + }; + + dma0: dma@e104100 { + compatible = "lantiq,dma-xway"; + reg = <0xe104100 0x800>; + }; + + ebu0: ebu@e105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xe105300 0x100>; + }; + + mei@e116000 { + compatible = "lantiq,mei-xway"; + reg = <0xe116000 0x9c>; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + gsw: etop@e180000 { + compatible = "lantiq,etop-xway"; + reg = <0xe180000 0x40000 + 0xe108000 0x200>; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + mac-address = [ 00 11 22 33 44 55 ]; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ppe@e234000 { + compatible = "lantiq,ppe-arx100"; + reg = <0xe234000 0x3ffd>; + interrupt-parent = <&icu0>; + interrupts = <96>; + }; + + pci0: pci@e105400 { + status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xe105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; + req-mask = <0x1>; + }; + }; + + adsl { + compatible = "lantiq,adsl-arx100"; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts new file mode 100644 index 0000000000..aa825abd9f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts @@ -0,0 +1,169 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9"; + model = "AVM FRITZ!Box 7312"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &info_green; + led-wifi = &wlan; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wlan { + label = "wlan"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + dect { + label = "dect"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "fritz7312:green:power"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice { + label = "fritz7312:green:fon"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + dect { + label = "fritz7312:green:dect"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + wlan: wlan { + label = "fritz7312:green:wlan"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + info_green: info_green { + label = "fritz7312:green:info"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ar8030-intr { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + ar8030-clk { + lantiq,groups = "clkout2"; + lantiq,output = <1>; + lantiq,open-drain; + }; + ar8030-rst { + lantiq,pins = "io34"; + lantiq,output = <1>; + lantiq,pull = <2>; + lantiq,open-drain; + }; + }; +}; + +&gsw { + phy-mode = "rmii"; + phy-handle = <&phy0>; + mtd-mac-address = <&ath9k_cal 0xa91>; + mtd-mac-address-increment = <(-2)>; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ath9k_cal: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0xf60000>; + }; + + partition@f80000 { + label = "tffs (1)"; + reg = <0xf80000 0x40000>; + read-only; + }; + + partition@fc0000 { + label = "tffs (2)"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, + <&pci_gnt3_pins>, <&pci_gnt4_pins>, + <&pci_req1_pins>, <&pci_req2_pins>, + <&pci_req4_pins>; + pinctrl-names = "default"; + + req-mask = <0xf>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts new file mode 100644 index 0000000000..424b778bb4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts @@ -0,0 +1,151 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9"; + model = "AVM FRITZ!Box 7320"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &info_green; + led-wifi = &wlan; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + dect { + label = "dect"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "fritz7320:green:power"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice { + label = "fritz7320:green:fon"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + dect { + label = "fritz7320:green:dect"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + wlan: wlan { + label = "fritz7320:green:wlan"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + info_green: info_green { + label = "fritz7320:green:info"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "fritz7320:red:info"; + gpios = <&gpio 45 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&ath9k_cal 0xa91>; + mtd-mac-address-increment = <(-2)>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ath9k_cal: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0xf60000>; + }; + + partition@f80000 { + label = "tffs (1)"; + reg = <0xf80000 0x40000>; + read-only; + }; + + partition@fc0000 { + label = "tffs (2)"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, + <&pci_gnt3_pins>, <&pci_gnt4_pins>, + <&pci_req1_pins>, <&pci_req2_pins>, + <&pci_req3_pins>, <&pci_req4_pins>; + + req-mask = <0xf>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts new file mode 100644 index 0000000000..044ae2b417 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_bt_homehub-v3a.dts @@ -0,0 +1,191 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9"; + model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */ + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_orange; + led-failsafe = &power_red; + led-running = &power_blue; + led-upgrade = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + restart { + label = "restart"; + gpios = <&gpio 52 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wireless-red { + label = "bthomehubv3a:red:wireless"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + wireless-orange { + label = "bthomehubv3a:orange:wireless"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv3a:blue:wireless"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + + broadband-red { + label = "bthomehubv3a:red:broadband"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + broadband-orange { + label = "bthomehubv3a:orange:broadband"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv3a:blue:broadband"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + power_red: power-red { + label = "bthomehubv3a:red:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + power_orange: power-orange { + label = "bthomehubv3a:orange:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv3a:blue:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + }; + }; +}; + +&gsw { + phy-mode = "rgmii"; +}; + +&localbus { + flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000 >; + req-mask = <0x1>; /* PCI request lines to mask during NAND access */ + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preboot"; + reg = <0x00000 0x8000>; + read-only; + }; + partition@8000 { + label = "u-boot"; + reg = <0x8000 0x05c000>; + read-only; + }; + partition@64000 { + label = "uboot_env"; + reg = <0x64000 0x004000>; + }; + ath9k_cal: partition@68000 { + label = "art-copy"; + reg = <0x68000 0x004000>; + }; + partition@6c000 { + label = "kernel"; + reg = <0x6c000 0x200000>; + }; + partition@26c000 { + label = "ubi"; + reg = <0x26c000 0x1d94000>; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@7000 { + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts new file mode 100644 index 0000000000..5419215dc6 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_buffalo_wbmr-hp-g300h.dts @@ -0,0 +1,197 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9"; + model = "Buffalo WBMR-HP-G300H"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &online_green; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + eject { + label = "eject"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + movie { + label = "movie"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power { + label = "wbmr:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "wbmr:red:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + security { + label = "wbmr:yellow:security"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wbmr:green:wireless"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "wbmr:green:dsl"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + online_green: online { + label = "wbmr:green:internet"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "wbmr:red:internet"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + movie { + label = "wbmr:blue:movie"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "wbmr:green:usb"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 36 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci-in { + lantiq,groups = "req1"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci-out { + lantiq,groups = "gnt1"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&gsw { + phy-mode = "rgmii"; + mtd-mac-address = <&boardconfig 0x10024>; +}; + +&pci0 { + status = "okay"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x60000 0x1f20000>; + }; + + boardconfig: partition@1fc0000 { + label = "board"; + reg = <0x1fc0000 0x20000>; + read-only; + }; + + partition@1fe0000 { + label = "calibration"; + reg = <0x1fe0000 0x20000>; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_lantiq_easy50810.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_lantiq_easy50810.dts new file mode 100644 index 0000000000..87ba62de33 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_lantiq_easy50810.dts @@ -0,0 +1,73 @@ +/dts-v1/; + +#include "ar9.dtsi" + +/ { + compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9"; + model = "Lantiq EASY50810"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; +}; + +&stp { + status = "okay"; + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dts new file mode 100644 index 0000000000..cbc99fe620 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "ar9_netgear_dgn3500.dtsi" + +/ { + compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9"; + model = "Netgear DGN3500"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dtsi new file mode 100644 index 0000000000..a3dbbbdfad --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500.dtsi @@ -0,0 +1,185 @@ +#include "ar9.dtsi" + +#include + +/ { + chosen { + bootargs = "root= console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &internet; + led-usb = &led_usb; + led-wifi = &wifi_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + rtl8366rb { + compatible = "realtek,rtl8366rb"; + gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>; + gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>; + + realtek,initvals = < + 0x0000 0x0830 + 0x0400 0x8130 + 0x000a 0x83ed + 0x0f51 0x0017 + 0x02f5 0x0048 + 0x02fa 0xffdf + 0x02fb 0xffe0 + 0x0450 0x0000 + 0x0401 0x0000 + 0x0431 0x0960 + >; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + internet: internet { + label = "dgn3500:green:internet"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "dgn3500:red:internet"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "dgn3500:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "dgn3500:green:usb"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + power_green: power { + label = "dgn3500:green:power"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "dgn3500:red:power"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + wifi_green: wifi { + label = "dgn3500:green:wireless"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "dgn3500:amber:wireless"; + gpios = <&gpio 51 GPIO_ACTIVE_LOW>; + }; + wps { + label = "dgn3500:green:wps"; + gpios = <&gpio 52 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; +}; + +&gsw { + phy-mode = "mii"; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "uboot"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x10000>; + label = "uboot-env"; + read-only; + }; + + ath9k_cal: partition@20000 { + reg = <0x20000 0x10000>; + label = "calibration"; + read-only; + }; + + partition@50000 { + reg = <0x50000 0xfa0000>; + label = "firmware"; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500b.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500b.dts new file mode 100644 index 0000000000..b69613e48f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_netgear_dgn3500b.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "ar9_netgear_dgn3500.dtsi" + +/ { + compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9"; + model = "Netgear DGN3500B"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts new file mode 100644 index 0000000000..9b640e0327 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zte_h201l.dts @@ -0,0 +1,172 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9"; + model = "ZTE H210L"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_green; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &online; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 55 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power { + label = "h201l:green:power"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + online: online { + label = "h201l:green:internet"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "h201l:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + phone { + label = "h201l:green:phone"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + wps { + label = "h201l:green:wps"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "h201l:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "h201l:green:usb"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 38 GPIO_ACTIVE_HIGH>; + }; + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + }; + wifi { + gpio-export,name = "wifi"; + gpio-export,output = <1>; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 36 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + }; +}; + +&gsw { + phy-mode = "rgmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "firmware"; + reg = <0x30000 0x7d0000>; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts new file mode 100644 index 0000000000..79896c6478 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include + +/ { + compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9"; + model = "ZyXEL P-2601HN-Fx"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power { + label = "p2601hnfx:green:power"; + gpios = <&stp 11 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "p2601hnfx:red:power"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "p2601hnfx:green:internet"; + gpios = <&stp 13 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "p2601hnfx:red:internet"; + gpios = <&stp 12 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "p2601hnfx:green:dsl"; + gpios = <&stp 14 GPIO_ACTIVE_LOW>; + }; + phone { + label = "p2601hnfx:green:phone"; + gpios = <&stp 9 GPIO_ACTIVE_LOW>; + }; + phone2 { + label = "p2601hnfx:orange:phone"; + gpios = <&stp 8 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "p2601hnfx:green:wireless"; + gpios = <&stp 15 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "p2601hnfx:orange:wireless"; + gpios = <&stp 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 50 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xfa0000>; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; +}; + +&stp { + status = "okay"; + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi new file mode 100644 index 0000000000..6ee6dda571 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi @@ -0,0 +1,315 @@ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24Kc"; + reg = <0>; + }; + }; + + reboot { + compatible = "syscon-reboot"; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0x40000000>; + }; + + biu@1f800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x7fffff>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803f0 { + compatible = "lantiq,wdt"; + reg = <0x803f0 0x10>; + }; + }; + + sram@1f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1f000000 0x800000>; + ranges = <0x0 0x1f000000 0x7fffff>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + vmmc: vmmc@107000 { + status = "disabled"; + compatible = "lantiq,vmmc-xway"; + reg = <0x107000 0x400>; + interrupt-parent = <&icu0>; + interrupts = <150 151 152 153 154 155>; + }; + + rcu0: rcu@203000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,danube-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x1000>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + reset: reset-controller@10 { + compatible = "lantiq,danube-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + usb_phy: usb2-phy@18 { + compatible = "lantiq,danube-usb2-phy"; + reg = <0x18 4>; + status = "disabled"; + + resets = <&reset 4 4>; + reset-names = "ctrl"; + #phy-cells = <0>; + }; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xeefffff>; + reg = <0x10000000 0xef00000>; + + localbus: localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@e100a00 { + compatible = "lantiq,gptu-xway"; + reg = <0xe100a00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + gpios: stp@e100bb0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xe100bb0 0x40>; + + pinctrl-0 = <&stp_pins>; + pinctrl-names = "default"; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + status = "disabled"; + }; + + asc0: serial@e100400 { + compatible = "lantiq,asc"; + reg = <0xe100400 0x400>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + status = "disabled"; + }; + + gpio: pinmux@e100b10 { + compatible = "lantiq,danube-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe100b10 0xa0>; + + nand_pins: nand { + mux-0 { + lantiq,groups = "nand cle", "nand ale", + "nand rd"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + mux-1 { + lantiq,groups = "nand rdy"; + lantiq,function = "ebu"; + lantiq,output = <0>; + lantiq,pull = <2>; + }; + }; + + nand_cs1_pins: nand-cs1 { + mux { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + + pci_gnt1_pins: pci-gnt1 { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_gnt2_pins: pci-gnt2 { + lantiq,groups = "gnt2"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_req1_pins: pci-req1 { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + pci_req2_pins: pci-req2 { + lantiq,groups = "req2"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + stp_pins: stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; + + asc1: serial@e100c00 { + compatible = "lantiq,asc"; + reg = <0xe100c00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + usb: usb@e101000 { + compatible = "lantiq,danube-usb"; + reg = <0xe101000 0x1000 + 0xe120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62>; + dr_mode = "host"; + phys = <&usb_phy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + deu@e103100 { + compatible = "lantiq,deu-danube"; + reg = <0xe103100 0xf00>; + }; + + dma0: dma@e104100 { + compatible = "lantiq,dma-xway"; + reg = <0xe104100 0x800>; + }; + + ebu0: ebu@e105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xe105300 0x100>; + }; + + mei@e116000 { + compatible = "lantiq,mei-xway"; + reg = <0xe116000 0x400>; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + gsw: etop@e180000 { + compatible = "lantiq,etop-xway"; + reg = <0xe180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + ppe@e234000 { + compatible = "lantiq,ppe-danube"; + reg = <0xe234000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <96>; + }; + + pci0: pci@e105400 { + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xe105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ + }; + }; + + adsl { + compatible = "lantiq,adsl-danube"; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4510pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4510pw.dts new file mode 100644 index 0000000000..19a44d5f6d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4510pw.dts @@ -0,0 +1,214 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube"; + model = "Wippies, Elisa"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power2; + led-running = &power; + led-upgrade = &power; + + led-dsl = &adsl; + led-internet = &internet; + led-usb = &led_usb; + led-usb2 = &led_usb2; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpios 21 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + power2: power2 { + label = "power2"; + gpios = <&gpios 20 GPIO_ACTIVE_HIGH>; + }; + lan1 { + label = "lan1"; + gpios = <&gpios 19 GPIO_ACTIVE_HIGH>; + }; + lan2 { + label = "lan2"; + gpios = <&gpios 18 GPIO_ACTIVE_HIGH>; + }; + lan3 { + label = "lan3"; + gpios = <&gpios 17 GPIO_ACTIVE_HIGH>; + }; + lan4 { + label = "lan4"; + gpios = <&gpios 16 GPIO_ACTIVE_HIGH>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; + }; + adsl: adsl { + label = "adsl"; + gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; + }; + internet: internet { + label = "internet"; + gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; + }; + internet2 { + label = "internet2"; + gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; + }; + voip { + label = "voip"; + gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; + }; + phone { + label = "phone"; + gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; + }; + phone2 { + label = "phone2"; + gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; + }; + led_usb: usb { + label = "usb"; + gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; + }; + led_usb2: usb2 { + label = "usb2"; + gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; + }; + usb3 { + label = "usb3"; + gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; + }; + unlabeled { + label = "unlabeled"; + gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu a23"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + exin { + lantiq,groups = "exin1", "exin2"; + lantiq,function = "exin"; + lantiq,output = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + buttons { + lantiq,pins = "io3", "io14"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; +}; + +&gpios { + status = "okay"; + lantiq,groups = <0x7>; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + lantiq,noxip; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xfa0000>; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, + <&pci_req1_pins>, <&pci_req2_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + interrupt-map = < + 0x6000 0 0 1 &icu0 135 + 0x7800 0 0 1 &icu0 66 + 0x7800 0 0 2 &icu0 66 + 0x7800 0 0 3 &icu0 66 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x7>; +}; + +&vmmc { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dts new file mode 100644 index 0000000000..ff34068005 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "danube_arcadyan_arv4518pwr01.dtsi" + +/ { + compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube"; + model = "SMC7908A-ISP"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi new file mode 100644 index 0000000000..dcae06d894 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi @@ -0,0 +1,200 @@ +#include "danube.dtsi" + +#include + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &online; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x16>; + ath,mac-increment = <1>; + ath,eep-swap; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "online"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + dsl2 { + label = "dsl2"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voice { + label = "voice"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "fxs1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "fxs2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "fxo"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x0>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>, + <&pci_req1_pins>, <&pci_req2_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01a.dts new file mode 100644 index 0000000000..b261a2fa91 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01a.dts @@ -0,0 +1,12 @@ +/dts-v1/; + +#include "danube_arcadyan_arv4518pwr01.dtsi" + +/ { + compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube"; + model = "SMC7908A-ISP, Airties WAV-221"; +}; + +&pci0 { + lantiq,external-clock; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts new file mode 100644 index 0000000000..8e5301ddc9 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4519pw.dts @@ -0,0 +1,205 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube"; + model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &internet_green; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power { + label = "arv4519pw:green:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "arv4519pw:red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4519pw:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "arv4519pw:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet_green: online { + label = "arv4519pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "arv4519pw:red:internet"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "arv4519pw:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voip { + label = "arv4519pw:green:voip"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv4519pw:green:phone1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv4519pw:green:phone2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv4519pw:green:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv4519pw:green:wps"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv4519pw:orange:wps"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "arv4519pw:red:wps"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@3f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x400>; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts new file mode 100644 index 0000000000..b59477cb19 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4520pw.dts @@ -0,0 +1,222 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube"; + model = "Easybox 800, WAV-281"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_blue; + led-failsafe = &power_red; + led-running = &power_blue; + led-upgrade = &power_blue; + + led-dsl = &dsl; + led-internet = &internet_blue; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_blue: power { + label = "arv4520pw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv4520pw:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet_blue: internet { + label = "arv4520pw:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power2 { + label = "arv4520pw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv4520pw:yellow:wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv4520pw:red:wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + /* + wps green is missing + */ + fxs1 { + label = "arv4520pw:blue:telefon1"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv4520pw:blue:telefon2"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + isdn { + label = "arv4520pw:blue:isdn"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv4520pw:blue:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv4520pw:blue:sprache"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "arv4520pw:blue:usb"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4520pw:blue:wifi"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv4520pw:red:internet"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + /* + info is missing + */ + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; +}; + +&gsw { + /* gpiomm 10 - switch */ + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "firmware"; + reg = <0x30000 0x3c0000>; + }; + + boardconfig: partition@7f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x400>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH + &gpiomm 7 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4525pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4525pw.dts new file mode 100644 index 0000000000..cceb42164e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4525pw.dts @@ -0,0 +1,151 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube"; + model = "Speedport W501V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + /* we dont have a power led, lets use the online led */ + led-boot = &online; + led-failsafe = &online; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x0>; + ath,eep-swap; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + fxo { + label = "arv4525pw:green:festnetz"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + fxs { + label = "arv4525pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "arv4525pw:green:t-dsl"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4525pw:green:wlan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "arv4525pw:green:online"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + relay { + lantiq,pins = "io31"; + lantiq,output = <1>; + }; + }; +}; + +/* #define ARV4525PW_PHYRESET 13 */ +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +/* #define ARV4525PW_RELAY 31 */ +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts new file mode 100644 index 0000000000..eecff4bb0b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv452cqw.dts @@ -0,0 +1,240 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube"; + model = "Arcor 801"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_blue; + led-failsafe = &power_red; + led-running = &power_blue; + led-upgrade = &power_blue; + + led-dsl = &dsl_blue; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x0>; + ath,eep-swap; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power_blue: power0 { + label = "arv452cqw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl_blue: dsl { + label = "arv452cqw:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + isdn { + label = "arv452cqw:blue:isdn"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power1 { + label = "arv452cqw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv452cqw:blue:wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps1 { + label = "arv452cqw:yellow:wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv452cqw:blue:telefon1"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv452cqw:blue:telefon2"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv452cqw:red:wps"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv452cqw:blue:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv452cqw:blue:sprache"; + gpios = <&gpiomm 4 1>; + }; + led_usb: usb { + label = "arv452cqw:blue:usb"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv452cqw:blue:wlan"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + /* + internet blue and internet red are missing + dsl2 and dsl3 are not referenced in manual + */ + dsl2 { + label = "arv452cqw:yellow:dsl"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + dsl3 { + label = "arv452cqw:red:dsl"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io7", "io9"; + lantiq,output = <1>; + }; + }; +}; + +/* +#define ARV452CPW_SWITCH_RESET 110 +*/ +&gsw { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x400000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@3f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x77f>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH + &gpiomm 7 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7506pw11.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7506pw11.dts new file mode 100644 index 0000000000..9e4216033b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7506pw11.dts @@ -0,0 +1,162 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube"; + model = "Alice/O2 IAD 4421"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power_red; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wlan; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + wlan: wlan { + label = "arv7506pw11:green:wlan"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + power: power { + label = "arv7506pw11:green:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv7506pw11:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "arv7506pw11:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power_red { + label = "arv7506pw11:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "arv7506pw11:red:internet"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + info { + label = "arv7506pw11:green:info"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + telefon { + label = "arv7506pw11:green:telefon"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "arv7506pw11:red:info"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + }; +}; + +/* GPIO 19: switch reset */ +&gsw { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7a0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts new file mode 100644 index 0000000000..e5fd05fe40 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts @@ -0,0 +1,198 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7510PW22"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &internet; + led-usb = &umts; + led-wifi = &wlan; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + internet: internet { + label = "internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + wlan: wlan { + label = "wlan"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + umts: 3g { + label = "3g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + message { + label = "message"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + pins_out { + lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20"; + lantiq,output = <1>; + }; + pins_in { + lantiq,pins = "io11", "io12", "io28"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gsw { + /* Switch reset 19 */ + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xf80000>; + }; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 + 0x7800 0 0 1 &icu0 135 + 0x7800 0 0 2 &icu0 135 + 0x7800 0 0 3 &icu0 135 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x3>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts new file mode 100644 index 0000000000..ae0d27a042 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts @@ -0,0 +1,233 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7518PW"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &online_green; + led-usb = &led_usb; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power_green: power { + label = "arv7518pw:green:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv7518pw:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online_green: online { + label = "arv7518pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv7518pw:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + power_red: power2 { + label = "arv7518pw:red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "arv7518pw:red:internet"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "arv7518pw:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv7518pw:green:voip"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv7518pw:green:phone1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv7518pw:green:phone2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + unlabeled { + label = "arv7518pw:amber:unlabeled"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv7518pw:amber:wps"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv7518pw:green:wps"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "arv7518pw:red:wps"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19"; + lantiq,output = <1>; + }; + keys { + lantiq,pins = "io28", "io30"; + lantiq,output = <0>; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +/* +#define SWITCH_RESET 13 +*/ +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x0>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + lantiq,external-clock; + req-mask = <0xf>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7519pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7519pw.dts new file mode 100644 index 0000000000..34b541af92 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7519pw.dts @@ -0,0 +1,217 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7519PW"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power2; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power2: power2 { + label = "power2"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "online"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "online2"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "wifi2"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + wifi3 { + label = "wifi3"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + voice { + label = "voice"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "wps2"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "wps3"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + lan { + label = "lan"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + tv { + label = "tv"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + upgrade { + label = "upgrade"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; + + /* is there another way to "reserve" the GPIO? */ + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + switch_rst { + lantiq,pins = "io19"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xf80000>; + }; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; + +&usb_phy { + status = "okay"; +}; + +/* warning: passive port only works with active devices */ +&usb { + status = "okay"; +}; + +&vmmc { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7525pw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7525pw.dts new file mode 100644 index 0000000000..d673c9b204 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7525pw.dts @@ -0,0 +1,149 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube"; + model = "Speedport W303V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &power_green; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power_green: power { + label = "arv7525pw:green:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power1 { + label = "arv7525pw:red:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "arv7525pw:green:online"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv7525pw:green:telefonie"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv7525pw:red:telefonie"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv7525pw:green:wlan"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "board_config"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + interrupt-map = <0x7000 0 0 1 &icu0 135 1>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + }; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts new file mode 100644 index 0000000000..069b1b1ed6 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts @@ -0,0 +1,240 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube"; + model = "Arcor 802"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_red; + led-failsafe = &power_blue; + led-running = &power_red; + led-upgrade = &power_red; + + led-dsl = &internet_red; + led-usb = &umts; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + dsl { + label = "dsl"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power_blue: power1 { + label = "arv752dpw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + internet_red: internet { + label = "arv752dpw:red:internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + message { + label = "arv752dpw:red:message"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "arv752dpw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice1 { + label = "arv752dpw:red:voice"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + umts: umts { + label = "arv752dpw:red:umts"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv752dpw:red:wifi"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv752dpw:green:tae-n"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv752dpw:green:tae-u"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv752dpw:green:isdn"; + gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv752dpw:blue:internet"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv752dpw:blue:voice"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io8"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + keys { + lantiq,pins = "io11", "io12", "io13", "io28"; + lantiq,output = <0>; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gsw { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x3>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + interrupt-map = <0x7000 0 0 1 &icu0 135>; + req-mask = <0x3>; + + wifi@1814,0601 { + compatible = "pci1814,0601"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts new file mode 100644 index 0000000000..ec90a2bef9 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts @@ -0,0 +1,261 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube"; + model = "Arcor 803"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_red; + led-failsafe = &power_blue; + led-running = &power_red; + led-upgrade = &power_red; + + led-dsl = &internet_red; + led-usb = &umts; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + dsl { + label = "dsl"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power_blue: power1 { + label = "arv752dpw22:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + internet_red: internet { + label = "arv752dpw22:red:internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + message { + label = "arv752dpw22:red:message"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "arv752dpw22:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice1 { + label = "arv752dpw22:red:voice"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + umts: umts { + label = "arv752dpw22:red:umts"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv752dpw22:red:wifi"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv752dpw22:green:tae-n"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv752dpw22:green:tae-u"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv752dpw22:green:isdn"; + gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv752dpw22:blue:internet"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv752dpw22:blue:voice"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + eth1 { + label = "arv752dpw22:green:lan1"; + gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>; + }; + eth2 { + label = "arv752dpw22:green:lan2"; + gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>; + }; + eth3 { + label = "arv752dpw22:green:lan3"; + gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>; + }; + eth4 { + label = "arv752dpw22:green:lan4"; + gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io8"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + buttons { + lantiq,pins = "io11", "io12", "io13", "io28"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x30000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x40000 0x7b0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <3>; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + lantiq,external-clock; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 + 0x7800 0 0 1 &icu0 135 + 0x7800 0 0 2 &icu0 135 + 0x7800 0 0 3 &icu0 135 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x3>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts new file mode 100644 index 0000000000..4bf44a10e1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv8539pw22.dts @@ -0,0 +1,181 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube"; + model = "Speedport W 504V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl_green; + led-internet = &online_green; + led-wifi = &wireless_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wlan { + label = "wlan"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + /* key DECT is missing */ + }; + + leds { + compatible = "gpio-leds"; + + power_green: power-green { + label = "arv8539pw22:green:power"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power-red { + label = "arv8539pw22:red:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + dsl_green: dsl-green { + label = "arv8539pw22:green:dsl"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + online_green: online-green { + label = "arv8539pw22:green:online"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + wireless_green: wireless-green { + label = "arv8539pw22:green:wlan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + /* + telefonie green is missing + */ + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + relay { + lantiq,pins = "io31"; + lantiq,output = <1>; + }; + }; +}; + +&gsw { + phy-mode = "mii"; + mtd-mac-address = <&art 0x16>; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x30000>; /* 192 KiB */ + read-only; + }; + + partition@30000 { + label = "uboot"; + reg = <0x30000 0x10000>; /* 64 KiB */ + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7b0000>; /* 7872 KiB */ + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x10000>; /* 64 KiB*/ + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&art 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts new file mode 100644 index 0000000000..67b0f9631f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_audiocodes_mp-252.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +#include "danube.dtsi" + +/ { + compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube"; + model = "AudioCodes MediaPack MP-252"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x20000>; + }; + + partition@40000 { + label = "boardconfig"; + reg = <0x40000 0x60000>; + read-only; + }; + + partition@a0000 { + label = "firmware"; + reg = <0xa0000 0xf20000>; + }; + + partition@fc0000 { + label = "sysconfig"; + reg = <0xfc0000 0x40000>; + }; + + partition@1000000 { + label = "rootfs_data"; + reg = <0x1000000 0x1000000>; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts new file mode 100644 index 0000000000..40886feec4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts @@ -0,0 +1,238 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube"; + model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */ + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_orange; + led-failsafe = &power_red; + led-running = &power_blue; + led-upgrade = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + findhandset { + label = "findhandset"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + upgrading-orange { + label = "bthomehubv2b:orange:upgrading"; + gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; + }; + + phone-orange { + label = "bthomehubv2b:orange:phone"; + gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; + }; + phone-blue { + label = "bthomehubv2b:blue:phone"; + gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; + }; + + wireless-orange { + label = "bthomehubv2b:orange:wireless"; + gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv2b:blue:wireless"; + gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; + }; + + broadband-red { + label = "bthomehubv2b:red:broadband"; + gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; + }; + broadband-orange { + label = "bthomehubv2b:orange:broadband"; + gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv2b:blue:broadband"; + gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; + }; + + power_red: power-red { + label = "bthomehubv2b:red:power"; + gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; + }; + power_orange: power-orange { + label = "bthomehubv2b:orange:power"; + gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv2b:blue:power"; + gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + }; + + btn_in { + lantiq,pins = "io2", "io15", "io22"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + }; +}; + +&gpios { + status = "okay"; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { /* NOR Flash: Spansion S29AL004D 512KB */ + compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ + lantiq,cs = <0>; + bank-width = <2>; + reg = <0 0x0 0x80000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; /* 256KB */ + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x10000>; /* 64KB */ + }; + + partition@50000 { + label = "rg_conf_1"; + reg = <0x50000 0x10000>; + }; + + partition@60000 { + label = "rg_conf_2"; + reg = <0x60000 0x10000>; + }; + + partition@70000 { + label = "rg_conf_factory"; + reg = <0x70000 0x10000>; + }; + }; + }; + + flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000 >; + req-mask = <0x1>; /* PCI request lines to mask during NAND access */ + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ath9k_cal: partition@0 { + label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */ + reg = <0x00000 0x4000>; + read-only; + }; + + partition@4000 { + label = "kernel"; + reg = <0x4000 0x200000>; + }; + + partition@164000 { + label = "ubi"; + reg = <0x204000 0x1dfc000>; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0027 { + compatible = "pci168c,0027"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_lantiq_easy50712.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_lantiq_easy50712.dts new file mode 100644 index 0000000000..1afc74900e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_lantiq_easy50712.dts @@ -0,0 +1,72 @@ +/dts-v1/; + +#include "danube.dtsi" + +/ { + compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube"; + model = "Intel EASY50712 Nand"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + }; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts new file mode 100644 index 0000000000..0072f7e2b1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include + +/ { + compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube"; + model = "Gigaset SX761,SX762,SX763"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpios { + status = "okay"; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7c0000>; + }; + }; + }; + + gpiomm: gpio@1 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x3>; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon.dtsi new file mode 100644 index 0000000000..dada3bcff2 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon.dtsi @@ -0,0 +1,366 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,falcon"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips34kc"; + reg = <0>; + }; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ebu_cs0: localbus@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + reg = <0x10000000 0x4000000>; + ranges = <0x0 0x10000000 0x4000000>; + }; + ebu_cs1: localbus@14000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + reg = <0x14000000 0x4000000>; + ranges = <0x0 0x14000000 0x4000000>; + }; + + ebu@18000000 { + compatible = "lantiq,ebu-falcon"; + reg = <0x18000000 0x100>; + }; + + sbs2@1d000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sysb2", "simple-bus"; + reg = <0x1d000000 0x1000000>; + ranges = <0x0 0x1d000000 0x1000000>; + + clock_sysgpe: clock-controller@700000 { + compatible = "lantiq,sysgpe-falcon"; + reg = <0x700000 0x100>; + #clock-cells = <1>; + }; + + mps@4000 { + compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100"; + reg = <0x4000 0x1000>; + interrupt-parent = <&icu0>; + interrupts = <154 155>; + lantiq,mbx = <&mpsmbx>; + }; + + gpio0: gpio@810000 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <44>; + reg = <0x810000 0x80>; + clocks = <&clock_syseth 16>; + }; + + gpio2: gpio@810100 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <46>; + reg = <0x810100 0x80>; + clocks = <&clock_syseth 17>; + }; + + clock_syseth: clock-controller@b00000 { + compatible = "lantiq,syseth-falcon"; + reg = <0xb00000 0x100>; + #clock-cells = <1>; + }; + + pad@b01000 { + compatible = "lantiq,pad-falcon"; + reg = <0xb01000 0x100>; + lantiq,bank = <0>; + clocks = <&clock_syseth 20>; + }; + + pad@b02000 { + compatible = "lantiq,pad-falcon"; + reg = <0xb02000 0x100>; + lantiq,bank = <2>; + clocks = <&clock_syseth 21>; + }; + }; + + fpi@1e000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + reg = <0x1e000000 0x1000000>; + ranges = <0x0 0x1e000000 0x1000000>; + + serial1: serial@100b00 { + status = "disabled"; + compatible = "lantiq,asc"; + reg = <0x100b00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + line = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&asc1_pins>; + clocks = <&clock_sys1 11>; + }; + + serial0: serial@100c00 { + compatible = "lantiq,asc"; + reg = <0x100c00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + line = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&asc0_pins>; + clocks = <&clock_sys1 12>; + }; + + spi: spi@100d00 { + status = "disabled"; + compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc"; + interrupts = <22 23 24 25>; + interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100d00 0x100>; + interrupt-parent = <&icu0>; + clocks = <&clock_sys1 13>; + base_cs = <1>; + num_cs = <2>; + }; + + gptc@100e00 { + compatible = "lantiq,gptc-falcon"; + reg = <0x100e00 0x100>; + }; + + i2c: i2c@200000 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,lantiq-i2c"; + reg = <0x200000 0x10000>; + interrupt-parent = <&icu0>; + interrupts = <18 19 20 21>; + gpios = <&gpio1 7 0 &gpio1 8 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + clocks = <&clock_sys1 14>; + }; + + gpio1: gpio@800100 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <45>; + reg = <0x800100 0x100>; + clocks = <&clock_sys1 16>; + }; + + gpio3: gpio@800200 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <47>; + reg = <0x800200 0x100>; + clocks = <&clock_sys1 17>; + }; + + gpio4: gpio@800300 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <48>; + reg = <0x800300 0x100>; + clocks = <&clock_sys1 18>; + }; + + pad@800400 { + compatible = "lantiq,pad-falcon"; + reg = <0x800400 0x100>; + lantiq,bank = <1>; + clocks = <&clock_sys1 20>; + }; + + pad@800500 { + compatible = "lantiq,pad-falcon"; + reg = <0x800500 0x100>; + lantiq,bank = <3>; + clocks = <&clock_sys1 21>; + }; + + pad@800600 { + compatible = "lantiq,pad-falcon"; + reg = <0x800600 0x100>; + lantiq,bank = <4>; + clocks = <&clock_sys1 22>; + }; + + status@802000 { + compatible = "lantiq,status-falcon"; + reg = <0x802000 0x80>; + }; + + clock_sys1: clock-controller@f00000 { + compatible = "lantiq,sys1-falcon"; + reg = <0xf00000 0x100>; + #clock-cells = <1>; + }; + }; + + sbs0@1f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0x1f000000 0x400000>; + ranges = <0x0 0x1f000000 0x400000>; + + mpsmbx: mpsmbx@200000 { + reg = <0x200000 0x200>; + }; + }; + + biu@1f800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x800000>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803f0 { + compatible = "lantiq,wdt"; + reg = <0x803f0 0x10>; + }; + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + /*ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + };*/ + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + + asc0_pins: asc0 { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + }; + asc1_pins: asc1 { + asc1 { + lantiq,groups = "asc1"; + lantiq,function = "asc"; + }; + }; + i2c_pins: i2c_pins { + i2c_pins { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + }; + bootled_pins: bootled { + bootled { + lantiq,groups = "bootled"; + lantiq,function = "led"; + }; + }; + ntr_ntr8k: ntr8k { + ntr8k { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + }; + ntr_pps: pps { + pps { + lantiq,groups = "pps"; + lantiq,function = "ntr"; + }; + }; + ntr_gpio: gpio { + gpio { + lantiq,pins = "io5"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + }; + slic_pins: slic { + slic { + lantiq,groups = "slic"; + lantiq,function = "slic"; + }; + }; + }; + + pinselect-ntr { + compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr"; + pinctrl-names = "ntr8k", "pps", "gpio"; + pinctrl-0 = <&ntr_ntr8k>; + pinctrl-1 = <&ntr_pps>; + pinctrl-2 = <&ntr_gpio>; + }; + + pinselect-asc1 { + compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1"; + pinctrl-names = "default", "asc1"; + pinctrl-0 = <&slic_pins>; + pinctrl-1 = <&asc1_pins>; + }; + +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88388.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88388.dts new file mode 100644 index 0000000000..22ce8caced --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88388.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +#include +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon FTTDP8 Reference Board"; + compatible = "lantiq,easy88388", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io34", "io35", "io36", "io37", "io38", + "io39", "io40", "io41"; + lantiq,function = "gpio"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy88388:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + TEST { + label = "easy88388:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + STATUS { + label = "easy88388:green:status"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + ERROR { + label = "easy88388:red:error"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + + DSL1 { + label = "easy88388:dsl:1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + DSL2 { + label = "easy88388:dsl:2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + DSL3 { + label = "easy88388:dsl:3"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + DSL4 { + label = "easy88388:dsl:4"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + DSL5 { + label = "easy88388:dsl:5"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; + DSL6 { + label = "easy88388:dsl:6"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + DSL7 { + label = "easy88388:dsl:7"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + DSL8 { + label = "easy88388:dsl:8"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88444.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88444.dts new file mode 100644 index 0000000000..fa331450bf --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy88444.dts @@ -0,0 +1,72 @@ +/dts-v1/; + +#include +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon FTTdp G.FAST Reference Board"; + compatible = "lantiq,easy88444", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io34", "io35", "io37"; + lantiq,function = "gpio"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy88444:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + TEST { + label = "easy88444:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + STATUS { + label = "easy88444:green:status"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + GFAST1 { + label = "easy88444:gfast:1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + GFAST2 { + label = "easy88444:gfast:2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + GFAST3 { + label = "easy88444:gfast:3"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + GFAST4 { + label = "easy88444:gfast:4"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nand.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nand.dts new file mode 100644 index 0000000000..e4719d59e0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nand.dts @@ -0,0 +1,40 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_lantiq_easy98000.dtsi" + +/ { + model = "Lantiq Falcon (NAND)"; + compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &spi; + }; +}; + +&ebu_cs0 { + flash@0 { + compatible = "gen_nand", "lantiq,nand-falcon"; + bank-width = <1>; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + linux,mtd-name = "gen_nand"; + bbt-use-flash; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x40000 0x40000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x80000 0x3d0000>; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nor.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nor.dts new file mode 100644 index 0000000000..cba277e6d1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-nor.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_lantiq_easy98000.dtsi" + +/ { + model = "Lantiq Falcon (NOR)"; + compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &spi; + }; +}; + +&ebu_cs0 { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0x0 0x4000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x40000 0x40000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x80000 0x3d0000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-sflash.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-sflash.dts new file mode 100644 index 0000000000..e8d8b42470 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000-sflash.dts @@ -0,0 +1,16 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_lantiq_easy98000.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon (SFLASH)"; + compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + spi1 = &spi; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi new file mode 100644 index 0000000000..fa8c0b4b06 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98000.dtsi @@ -0,0 +1,110 @@ + +#include +#include + +/ { + compatible = "lantiq,easy98000", "lantiq,falcon"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>; + + LED_0 { + label = "easy98000:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_1 { + label = "easy98000:red:gpon"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_2 { + label = "easy98000:green:gpon_tx"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_3 { + label = "easy98000:green:gpon_rx"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_4 { + label = "easy98000:green:voice"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_5 { + label = "easy98000:green:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + +&ebu_cs1 { + eth0: ethernet@3 { + compatible = "davicom,dm9000"; + device_type = "network"; + reg = <0x0000003 0x1>, <0x0000001 0x1>; + reg-names = "addr", "data"; + interrupt-parent = <&gpio1>; + #interrupt-cells = <2>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpld@3c00000 { + compatible = "lantiq,easy98000_addon"; + reg = <0x3c00000 0x2>; + }; + + cpld@3c0000c { + compatible = "lantiq,easy98000_cpld_led"; + reg = <0x3c0000c 0x2>, <0x3c00012 0x2>; + }; +}; + +/* // enable this for second uart: +&serial1 { + status = "okay"; +};*/ + +&spi { + status = "okay"; + + eeprom@2 { + compatible = "atmel,at25", "atmel,at25160n"; + reg = <2>; + spi-max-frequency = <1000000>; + spi-cpha; + spi-cpol; + + pagesize = <32>; + size = <2048>; + address-width = <16>; + }; +}; + +&i2c { + status = "okay"; + + clock-frequency = <100000>; + + /* eeprom-emulation by OMU */ + eeprom@50 { + compatible = "at,24c02"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "at,24c02"; + reg = <0x51>; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020-v18.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020-v18.dts new file mode 100644 index 0000000000..773a490019 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020-v18.dts @@ -0,0 +1,68 @@ +/dts-v1/; + +#include + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon Reference Board V1.8"; + compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io11", "io14", "io36", "io37", "io38"; + lantiq,function = "gpio"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy98020:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98020:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98020:green:status"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98020:green:voice"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VIDEO { + label = "easy98020:green:video"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020.dts new file mode 100644 index 0000000000..397764aac4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98020.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +#include + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon Reference Board"; + compatible = "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: phy-led-pins { + lantiq,pins = "io42", "io41", "io38", "io37"; + lantiq,function = "gpio"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>, <&led_pins>; + + GPON { + label = "easy98020:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98020:green:test"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98020:green:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98020:green:voice"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VIDEO { + label = "easy98020:green:video"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + GE0_ACT { + label = "easy98020:ge0_act"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + GE0_LINK { + label = "easy98020:ge0_link"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + GE1_ACT { + label = "easy98020:ge1_act"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + GE1_LINK { + label = "easy98020:ge1_link"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98021.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98021.dts new file mode 100644 index 0000000000..aa63268149 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98021.dts @@ -0,0 +1,81 @@ +/dts-v1/; + +#include + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon HGU Reference Board"; + compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + gpio-mmc { + /* Place-holder for SIM-Card connector, + to list the used GPIOs, no official binding */ + compatible = "gpio-mmc"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>, + <&gpio0 3 GPIO_ACTIVE_HIGH>, + <&gpio0 2 GPIO_ACTIVE_HIGH>, + <0>; /* no CS */ + gpio-names = "di", "do", "clk", "cs"; + reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io11", "io14", "io36", "io37", "io38"; + lantiq,function = "gpio"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy98021:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98021:red:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98021:green:status"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98021:green:voice"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + SIMCARD { + label = "easy98021:green:simcard"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce.dts new file mode 100644 index 0000000000..f1ecebec3b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick with SyncE"; + compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce1588.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce1588.dts new file mode 100644 index 0000000000..98421174d3 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_easy98035synce1588.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick with SyncE/1588"; + compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-mdu.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-mdu.dts new file mode 100644 index 0000000000..130d49ebd7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-mdu.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +#include + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon / Vinax MDU Board"; + compatible = "lantiq,falcon-mdu", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>; + + LED_0 { + label = "mdu:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_1 { + label = "mdu:green:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_2 { + label = "mdu:green:2"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_3 { + label = "mdu:green:3"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_4 { + label = "mdu:green:4"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-sfp.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-sfp.dts new file mode 100644 index 0000000000..880c4edca8 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_lantiq_falcon-sfp.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon_sflash-16m.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick"; + compatible = "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_sflash-16m.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_sflash-16m.dtsi new file mode 100644 index 0000000000..b35f70b646 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/falcon_sflash-16m.dtsi @@ -0,0 +1,41 @@ + +&ebu_cs0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sflash-falcon", "simple-bus"; + + flash@0 { + compatible = "spansion,s25fl129p0", "spansion,s25fl129p1"; + reg = <0 0>; + linux,mtd-name = "sflash"; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x40000>; + label = "uboot"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x80000>; + label = "uboot_env"; + }; + + partition@c0000 { + reg = <0xc0000 0x740000>; + label = "image0"; + }; + + partition@800000 { + reg = <0x800000 0x800000>; + label = "image1"; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi new file mode 100644 index 0000000000..9e27830cb1 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi @@ -0,0 +1,477 @@ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,vr9"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips34Kc"; + reg = <0>; + }; + }; + + cputemp { + compatible = "lantiq,cputemp"; + }; + + reboot { + compatible = "syscon-reboot"; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0xe0000000>; + }; + + biu@1f800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x7fffff>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803f0 { + compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt"; + reg = <0x803f0 0x10>; + + regmap = <&rcu0>; + }; + }; + + sram@1f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1f000000 0x800000>; + ranges = <0x0 0x1f000000 0x7fffff>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66 40 41 42>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + }; + + dcdc@106a00 { + compatible = "lantiq,dcdc-xrx200"; + reg = <0x106a00 0x200>; + }; + + vmmc: vmmc@107000 { + status = "disabled"; + compatible = "lantiq,vmmc-xway"; + reg = <0x107000 0x300>; + interrupt-parent = <&icu0>; + interrupts = <150 151 152 153 154 155>; + }; + + rcu0: rcu@203000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x100>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + gphy0: gphy@20 { + compatible = "lantiq,xrx200-gphy"; + reg = <0x20 0x4>; + + resets = <&reset0 31 30>, <&reset1 7 7>; + reset-names = "gphy", "gphy2"; + }; + + gphy1: gphy@68 { + compatible = "lantiq,xrx200-gphy"; + reg = <0x68 0x4>; + + resets = <&reset0 29 28>, <&reset1 6 6>; + reset-names = "gphy", "gphy2"; + }; + + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + reset1: reset-controller@48 { + compatible = "lantiq,xrx200-reset"; + reg = <0x48 4>, <0x24 4>; + + #reset-cells = <2>; + }; + + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + status = "disabled"; + + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + + usb_phy1: usb2-phy@34 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x34 4>, <0x3c 4>; + status = "disabled"; + + resets = <&reset1 5 5>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + }; + }; + + fpi@10000000 { + compatible = "lantiq,xrx200-fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xf000000>; + reg = <0x1f400000 0x1000>, + <0x10000000 0xf000000>; + regmap = <&rcu0>; + offset-endianness = <0x4c>; + #address-cells = <1>; + #size-cells = <1>; + + localbus: localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@e100a00 { + compatible = "lantiq,gptu-xway"; + reg = <0xe100a00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + usif: usif@da00000 { + compatible = "lantiq,usif"; + reg = <0xda00000 0x1000000>; + interrupt-parent = <&icu0>; + interrupts = <29 125 107 108 109 110>; + status = "disabled"; + }; + + spi: spi@e100800 { + compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; + reg = <0xe100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; + status = "disabled"; + }; + + gpio: pinmux@e100b10 { + compatible = "lantiq,xrx200-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe100b10 0xa0>; + + gphy0_led0_pins: gphy0-led0 { + lantiq,groups = "gphy0 led0"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + gphy0_led1_pins: gphy0-led1 { + lantiq,groups = "gphy0 led1"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + gphy0_led2_pins: gphy0-led2 { + lantiq,groups = "gphy0 led2"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + gphy1_led0_pins: gphy1-led0 { + lantiq,groups = "gphy1 led0"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + gphy1_led1_pins: gphy1-led1 { + lantiq,groups = "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + gphy1_led2_pins: gphy1-led2 { + lantiq,groups = "gphy1 led2"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + + mdio_pins: mdio { + mux { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + + nand_pins: nand { + mux-0 { + lantiq,groups = "nand cle", "nand ale", + "nand rd"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + mux-1 { + lantiq,groups = "nand rdy"; + lantiq,function = "ebu"; + lantiq,output = <0>; + lantiq,pull = <2>; + }; + }; + + nand_cs1_pins: nand-cs1 { + mux { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + + pci_gnt1_pins: pci-gnt1 { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_req1_pins: pci-req1 { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + + spi_pins: spi { + mux-0 { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + mux-1 { + lantiq,groups = "spi_do", "spi_clk"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + + spi_cs4_pins: spi-cs4 { + mux { + lantiq,groups = "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + + stp_pins: stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; + + stp: stp@e100bb0 { + status = "disabled"; + compatible = "lantiq,gpio-stp-xway"; + reg = <0xe100bb0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + pinctrl-0 = <&stp_pins>; + pinctrl-names = "default"; + + lantiq,shadow = <0xffffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x0>; + lantiq,phy2 = <0x0>; + }; + + asc1: serial@e100c00 { + compatible = "lantiq,asc"; + reg = <0xe100c00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + deu@e103100 { + compatible = "lantiq,deu-xrx200"; + reg = <0xe103100 0xf00>; + }; + + dma0: dma@e104100 { + compatible = "lantiq,dma-xway"; + reg = <0xe104100 0x800>; + }; + + ebu0: ebu@e105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xe105300 0x100>; + }; + + usb0: usb@e101000 { + status = "disabled"; + compatible = "lantiq,xrx200-usb"; + reg = <0xe101000 0x1000 + 0xe120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62 91>; + dr_mode = "host"; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; + }; + + usb1: usb@e106000 { + status = "disabled"; + compatible = "lantiq,xrx200-usb"; + reg = <0xe106000 0x1000>; + interrupt-parent = <&icu0>; + interrupts = <91>; + dr_mode = "host"; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; + }; + + eth0: eth@e108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xe108000 0x3000 /* switch */ + 0xe10b100 0x70 /* mdio */ + 0xe10b1d8 0x30 /* mii */ + 0xe10b308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <75 73 72>; + resets = <&reset0 21 16>, <&reset0 8 8>; + reset-names = "switch", "ppe"; + lantiq,phys = <&gphy0>, <&gphy1>; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + mei@e116000 { + compatible = "lantiq,mei-xrx200"; + reg = <0xe116000 0x9c>; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + ppe@e234000 { + compatible = "lantiq,ppe-xrx200"; + reg = <0xe234000 0x3ffd>; + interrupt-parent = <&icu0>; + interrupts = <96>; + resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>; + reset-names = "dsp", "dfe", "tc"; + }; + + pcie0: pcie@d900000 { + compatible = "lantiq,pcie-xrx200"; + + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + + reg = <0xd900000 0x1000>; + + interrupt-parent = <&icu0>; + interrupts = <161 144>; + + device_type = "pci"; + + gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>; + }; + + pci0: pci@e105400 { + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xe105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ + }; + }; + + vdsl { + compatible = "lantiq,vdsl-vrx200"; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts new file mode 100644 index 0000000000..3d10f582b0 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts @@ -0,0 +1,155 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9"; + model = "BT OpenReach VDSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + dsl: dsl { + label = "asl56026:green:dsl"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + /* power-* is a bicolour led */ + power_green: power_green { + label = "asl56026:green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + power_red: power_red { + label = "asl56026:red:power"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_led_blink { + gpio-export,name = "power_led_blink"; + gpio-export,output = <0>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x0800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x750000>; + }; + + partition@790000 { + label = "ddrconfig"; + reg = <0x790000 0x70000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts new file mode 100644 index 0000000000..d6c521cfe7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts @@ -0,0 +1,246 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9"; + model = "Orange Livebox 2.1"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_green; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &internet_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan_green { + label = "arv7519rw22:green:lan"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "arv7519rw22:red:internet"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + power_green: power_green { + label = "arv7519rw22:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + alarm_blue { + label = "arv7519rw22:blue:alarm"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + internet_orange { + label = "arv7519rw22:orange:internet"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "arv7519rw22:green:internet"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + voice_green { + label = "arv7519rw22:green:voice"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "uboot-env"; + reg = <0x60000 0x20000>; + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x80000 0x1f00000>; + }; + + boardconfig: partition@1f80000 { + label = "boardconfig"; + reg = <0x1f80000 0x80000>; + read-only; + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts new file mode 100644 index 0000000000..e074147d66 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9"; + model = "BT OpenReach VDSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_red: power2 { + label = "vg3503j:red:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "vg3503j:green:dsl"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + power_green: power { + label = "vg3503j:green:power"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, + <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>, + <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; + + interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + lantiq,switch; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + partition@7f0000 { + label = "uboot-env"; + reg = <0x7f0000 0x10000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-brn.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-brn.dts new file mode 100644 index 0000000000..9f6f405a09 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-brn.dts @@ -0,0 +1,65 @@ +/dts-v1/; + +#include "vr9_arcadyan_vgv7510kw22.dtsi" + +/ { + compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + model = "o2 Box 6431"; + + sram@1f000000 { + cgu@103000 { + lantiq,phy-clk-src = <0x2>; + }; + }; +}; + +&localbus { + flash@0 { + partitions { + partition@0 { + label = "Boot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "Configuration"; + reg = <0x40000 0x40000>; + read-only; + }; + + partition@80000 { + label = "Certificate"; + reg = <0x80000 0x20000>; + read-only; + }; + + partition@a0000 { + label = "Special_Area"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@c0000 { + compatible = "brnboot,root-selector"; + label = "Primary_Setting"; + reg = <0xc0000 0x20000>; + read-only; + }; + + partition@e0000 { + label = "Code_Image_0"; + reg = <0xe0000 0x780000>; + brnboot,root-id = <0x00>; + read-only; + }; + + partition@860000 { + label = "Code_Image_1"; + reg = <0x860000 0x780000>; + brnboot,root-id = <0x01>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-nor.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-nor.dts new file mode 100644 index 0000000000..613ff3782c --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22-nor.dts @@ -0,0 +1,31 @@ +/dts-v1/; + +#include "vr9_arcadyan_vgv7510kw22.dtsi" + +/ { + compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + model = "o2 Box 6431"; +}; + +&localbus { + flash@0 { + partitions { + partition@0 { + label = "uboot"; + reg = <0x0 0x60000>; /* 384 KiB */ + read-only; + }; + + partition@60000 { + label = "uboot-env"; + reg = <0x60000 0x20000>; /* 128 KiB */ + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x80000 0xf60000>; /* 15744 KiB */ + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi new file mode 100644 index 0000000000..8db1ffbf81 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi @@ -0,0 +1,258 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl; + led-internet = &internet_green; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + dsl: dsl { + label = "vgv7510kw22:green:dsl"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "vgv7510kw22:red:internet"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + info_red { + label = "vgv7510kw22:red:info"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + power_green: power { + label = "vgv7510kw22:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + info_green { + label = "vgv7510kw22:green:info"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + internet_green: internet_green { + label = "vgv7510kw22:green:internet"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + label = "vgv7510kw22:green:wlan"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + + power_red: power2 { + label = "vgv7510kw22:red:power"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + + phone { + label = "vgv7510kw22:green:telefon"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, + <&gphy0_led0_pins>, <&gphy0_led1_pins>, + <&gphy1_led0_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "mii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +&pcie0 { + status = "disabled"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-brn.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-brn.dts new file mode 100644 index 0000000000..051de0c23e --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-brn.dts @@ -0,0 +1,70 @@ +/dts-v1/; + +#include "vr9_arcadyan_vgv7519.dtsi" + +/ { + compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + model = "KPN Experiabox V8"; +}; + +&localbus { + flash@0 { + partitions { + partition@0 { + label = "Boot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@50000 { + label = "Certificate"; + reg = <0x50000 0x10000>; + read-only; + }; + partition@60000 { + label = "Special_Area"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + label = " Reserve_0"; + reg = <0x70000 0x10000>; + read-only; + }; + + partition@80000 { + label = "Code_Image_0"; + reg = <0x80000 0x780000>; + brnboot,root-id = <0x00>; + read-only; + }; + + partition@4000000 { + compatible = "brnboot,root-selector"; + label = "Primary_Setting"; + reg = <0x4000000 0x10000>; + read-only; + }; + + partition@4010000 { + label = "Configuration"; + reg = <0x4010000 0x60000>; + read-only; + }; + + partition@4070000 { + label = " Reserve_1"; + reg = <0x4070000 0x10000>; + read-only; + }; + + partition@4080000 { + label = "Code_Image_1"; + reg = <0x4080000 0x780000>; + brnboot,root-id = <0x01>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-nor.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-nor.dts new file mode 100644 index 0000000000..2121fbf41d --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519-nor.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +#include "vr9_arcadyan_vgv7519.dtsi" + +/ { + compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + model = "KPN Experiabox V8"; +}; + +&localbus { + flash@0 { + partitions { + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + partition@60000 { + label = "uboot_env"; + reg = <0x60000 0x10000>; + read-only; + }; + partition@80000 { + label = "firmware"; + reg = <0x80000 0xf80000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi new file mode 100644 index 0000000000..e82407d7c3 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi @@ -0,0 +1,295 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &broadband_green; + led-internet = &internet_green; + led-wifi = &wireless_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + eco { + label = "eco"; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 45 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + wps { + label = "wps"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + eco { + label = "vgv7519:blue:eco"; + gpios = <&stp 2 GPIO_ACTIVE_LOW>; + }; + wps_red { + label = "vgv7519:red:wps"; + gpios = <&stp 3 GPIO_ACTIVE_LOW>; + }; + wps_green { + label = "vgv7519:green:wps"; + gpios = <&stp 4 GPIO_ACTIVE_LOW>; + }; + upgrade { + label = "vgv7519:blue:upgrade"; + gpios = <&stp 5 GPIO_ACTIVE_LOW>; + }; + tv { + label = "vgv7519:green:tv"; + gpios = <&stp 6 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "vgv7519:green:internet"; + gpios = <&stp 7 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "vgv7519:red:internet"; + gpios = <&stp 8 GPIO_ACTIVE_LOW>; + }; + broadband_red { + label = "vgv7519:red:broadband"; + gpios = <&stp 9 GPIO_ACTIVE_LOW>; + }; + broadband_green: broadband_green { + label = "vgv7519:green:broadband"; + gpios = <&stp 10 GPIO_ACTIVE_LOW>; + }; + voice { + label = "vgv7519:green:voice"; + gpios = <&stp 11 GPIO_ACTIVE_LOW>; + }; + wireless_red { + label = "vgv7519:red:wireless"; + gpios = <&stp 12 GPIO_ACTIVE_LOW>; + }; + wireless_green: wireless_green { + label = "vgv7519:green:wireless"; + gpios = <&stp 13 GPIO_ACTIVE_LOW>; + }; + power_green: power2 { + label = "vgv7519:green:power"; + gpios = <&stp 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power { + label = "vgv7519:red:power"; + gpios = <&stp 15 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>; + pinctrl-names = "default"; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>, <1 0x800000 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boardconfig: partition@40000 { + label = "board_config"; + reg = <0x40000 0x10000>; + read-only; + }; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3091 { + compatible = "pci1814,3091"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +&pcie0 { + status = "disabled"; +}; + +&stp { + status = "okay"; + lantiq,shadow = <0xffff>; + lantiq,groups = <0x3>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x0>; + lantiq,phy2 = <0x0>; + /* lantiq,rising; */ +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-hynix.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-hynix.dts new file mode 100644 index 0000000000..1aea98260a --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-hynix.dts @@ -0,0 +1,39 @@ +/dts-v1/; + +#include "vr9_avm_fritz3370-rev2.dtsi" + +/ { + compatible = "avm,fritz3370-rev2-hynix", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND)"; +}; + +&localbus { + flash@1 { + compatible = "lantiq,nand-xway"; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + nand-ecc-mode = "soft"; + nand-ecc-strength = <3>; + nand-ecc-step-size = <256>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-micron.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-micron.dts new file mode 100644 index 0000000000..a19d168159 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2-micron.dts @@ -0,0 +1,37 @@ +/dts-v1/; + +#include "vr9_avm_fritz3370-rev2.dtsi" + +/ { + compatible = "avm,fritz3370-rev2-micron", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3370 Rev. 2 (Micron NAND)"; +}; + +&localbus { + flash@1 { + compatible = "lantiq,nand-xway"; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + nand-ecc-mode = "on-die"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi new file mode 100644 index 0000000000..bac27c3649 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi @@ -0,0 +1,279 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3370 Rev. 2"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_red; + + led-dsl = &dsl; + led-internet = &info_green; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + wifi { + label = "wlan"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power { + label = "fritz3370:green:power"; + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + power_red: power2 { + label = "fritz3370:red:power"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + + info_red { + label = "fritz3370:red:info"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + label = "fritz3370:green:wlan"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + + dsl: dsl { + label = "fritz3370:green:dsl"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "fritz3370:green:lan"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + + info_green: info_green { + label = "fritz3370:green:info"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB1_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&pcie0 { + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + urlader: partition@0 { + reg = <0x0 0x20000>; + label = "urlader"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "tffs (1)"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "tffs (2)"; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb0_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb1_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts new file mode 100644 index 0000000000..012300ec57 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "vr9_avm_fritz736x.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz7360sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 7360 SL"; +}; + +&power_green { + label = "fritz7360sl:green:power"; +}; + +&power_red { + label = "fritz7360sl:red:power"; +}; + +&info_green { + label = "fritz7360sl:green:info"; +}; + +&wifi { + label = "fritz7360sl:green:wlan"; +}; + +&info_red { + label = "fritz7360sl:red:info"; +}; + +&dect { + label = "fritz7360sl:green:dect"; +}; + +&state_default { + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + + partitions { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fixed-partitions"; + + urlader: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0xf60000>; + }; + + partition@f80000 { + label = "tffs (1)"; + reg = <0xf80000 0x40000>; + read-only; + }; + + partition@fc0000 { + label = "tffs (2)"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts new file mode 100644 index 0000000000..a061a482da --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "vr9_avm_fritz736x.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 7362 SL"; +}; + +&power_green { + label = "fritz7362sl:green:power"; +}; + +&power_red { + label = "fritz7362sl:red:power"; +}; + +&info_green { + label = "fritz7362sl:green:info"; +}; + +&wifi { + label = "fritz7362sl:green:wlan"; +}; + +&info_red { + label = "fritz7362sl:red:info"; +}; + +&dect { + label = "fritz7362sl:green:dect"; +}; + +&state_default { + pcie-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <1000000>; + + urlader: partition@0 { + reg = <0x0 0x40000>; + label = "urlader"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x60000>; + label = "tffs (1)"; + read-only; + }; + + partition@A0000 { + reg = <0xA0000 0x60000>; + label = "tffs (2)"; + read-only; + }; + }; +}; + +&localbus { + flash@1 { + compatible = "lantiq,nand-xway"; + lantiq,cs1 = <1>; + bank-width = <1>; + reg = <1 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + nand-ecc-mode = "on-die"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&pcie0 { + gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; + + pcie@0 { + #size-cells = <1>; + #address-cells = <2>; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi new file mode 100644 index 0000000000..1553d2f7f4 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_red; + + led-dsl = &info_green; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + dect { + label = "dect"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + power_green: power { + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + power_red: power2 { + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + + info_green: info_green { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + info_red: info_red { + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + + dect: dect { + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&urlader 0xa91>; + mtd-mac-address-increment = <(-2)>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + }; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rmii"; + phy-handle = <&phy1>; + }; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x00>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + + phy1: ethernet-phy@1 { + reg = <0x01>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; + }; + +}; + +&pcie0 { + status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <1>; + #address-cells = <2>; + device_type = "pci"; + + wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts new file mode 100644 index 0000000000..43216d66be --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 7412"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_red; + + led-dsl = &info; + led-wifi = &wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + dect { + label = "dect"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green: power_green { + label = "fritz7412:green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + power_red: power_red { + label = "fritz7412:red:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + fon { + label = "fritz7412:green:fon"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + + dect { + label = "fritz7412:green:dect"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + label = "fritz7412:green:wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + + info: info { + label = "fritz7412:green:info"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nand-xway"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + lantiq,cs = <1>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "urlader"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "nand-tffs"; + reg = <0x40000 0x400000>; + read-only; + }; + + partition@440000 { + label = "kernel"; + reg = <0x440000 0x400000>; + }; + + partition@840000 { + label = "ubi"; + reg = <0x840000 0x3000000>; + }; + + partition@3840000 { + label = "reserved-kernel"; + reg = <0x3840000 0x400000>; + read-only; + }; + + partition@3c40000 { + label = "reserved-filesystem"; + reg = <0x3c40000 0x3000000>; + read-only; + }; + + partition@6c40000 { + label = "config"; + reg = <0x6c40000 0x400000>; + read-only; + }; + + partition@6e40000 { + label = "nand-filesystem"; + reg = <0x6e40000 0x400000>; + read-only; + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pcie-rst { + lantiq,pins = "io11"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +ð0 { + lantiq,phys = <&gphy0>; + + interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&vmmc { + status = "okay"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts new file mode 100644 index 0000000000..f6a2d9f6a7 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts @@ -0,0 +1,283 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9"; + model = "BT Home Hub 5A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_blue; + led-upgrade = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + restart { + label = "restart"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* broadband-* is a single RGB led */ + broadband-red { + label = "bthomehubv5a:red:broadband"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + broadband-green { + label = "bthomehubv5a:green:broadband"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv5a:blue:broadband"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + /* wireless-* is a single RGB led */ + wireless-red { + label = "bthomehubv5a:red:wireless"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + wireless-green { + label = "bthomehubv5a:green:wireless"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv5a:blue:wireless"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + /* power-* is a single RGB led */ + power_red: power-red { + label = "bthomehubv5a:red:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + power_green: power-green { + label = "bthomehubv5a:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv5a:blue:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + dimmed { + label = "dimmed"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain; + }; + pcie_rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + lantiq,open-drain; + }; + usb_vbus { + lantiq,pins = "io33"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; +}; + +&localbus { + flash@1 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0x1 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + nand-on-flash-bbt; + nand-ecc-strength = <3>; + nand-ecc-step-size = <256>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xa0000>; + read-only; + }; + partition@a0000 { + label = "uboot-env"; + reg = <0xa0000 0x20000>; + read-only; + }; + partition@c0000 { + label = "unused"; + reg = <0xc0000 0x40000>; + }; + partition@100000 { + label = "ubi"; + reg = <0x100000 0x7e80000>; + }; + /* + * last 512 KiB are for the bad block table, not writable + */ + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,002d { + compatible = "pci168c,002d"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + qca,disable-5ghz; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts new file mode 100644 index 0000000000..4631ad4ffe --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts @@ -0,0 +1,312 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9"; + model = "Buffalo WBMR-300HPD"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_g; + led-failsafe = &diag_r; + led-running = &power_g; + led-upgrade = &power_g; + + led-dsl = &dsl; + led-internet = &router_g; + led-wifi = &wifi_g; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + auto { + label = "auto"; + gpios = <&gpio 48 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + router { + label = "router"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + diag_r: diag_r { + label = "wbmr300:red:diag"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default_state = "off"; + }; + + wifi_g: wifi_g { + label = "wbmr300:green:wifi"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + + router_y: router_y { + label = "wbmr300:yellow:router"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + + wifi_y: wifi_y { + label = "wbmr300:yellow:wifi"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + + lan1: lan1 { + label = "wbmr300:green:lan1"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + wan: wan { + label = "wbmr300:green:wan"; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + + lan3: lan3 { + label = "wbmr300:green:lan3"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + lan2: lan2 { + label = "wbmr300:green:lan2"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + + internet_g: internet_g { + label = "wbmr300:green:internet"; + gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; + }; + + internet_y: internet_y { + label = "wbmr300:yellow:internet"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + }; + + router_g: router_g { + label = "wbmr300:green:router"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + + power_g: power_g { + label = "wbmr300:green:power"; + gpios = <&gpio 49 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <20000000>; + + partitions { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "u-boot"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x10000>; + label = "gphyfirmware"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x80000>; + label = "dsl_fw"; + }; + + partition@de0000 { + reg = <0xa0000 0xf40000>; + label = "firmware"; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "sysconfig"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x2000>; + label = "ubootconfig"; + }; + + partition@ff3000 { + reg = <0xff3000 0x2000>; + label = "board_config"; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nand.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nand.dts new file mode 100644 index 0000000000..585521459b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nand.dts @@ -0,0 +1,66 @@ +/dts-v1/; + + +#include "vr9_lantiq_easy80920.dtsi" + +/ { + compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + model = "Intel EASY80920 Nand"; + + chosen { + bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1"; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x100000>; /* 1024 KB */ + }; + + partition@100000 { + label = "uboot_env"; + reg = <0x100000 0x40000>; /* 256 KB */ + }; + + partition@140000 { + label = "ubootconfigB"; + reg = <0x140000 0x40000>; /* 256 KB */ + }; + + partition@180000 { + label = "gphyfirmware"; + reg = <0x180000 0x40000>; /* 256 KB */ + }; + + partition@1c0000 { + label = "ubi"; + reg = <0x1c0000 0xc800000>; + }; + + partition@c9c0000 { + label = "calibration"; + reg = <0xc9c0000 0x100000>; + }; + + partition@cac0000 { + label = "res"; + reg = <0xcac0000 0x13540000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nor.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nor.dts new file mode 100644 index 0000000000..c204c5e093 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920-nor.dts @@ -0,0 +1,37 @@ +/dts-v1/; + +#include "vr9_lantiq_easy80920.dtsi" + +/ { + compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + model = "Intel EASY80920 Nor"; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7e0000>; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi new file mode 100644 index 0000000000..4fbc1ac496 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi @@ -0,0 +1,279 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-usb = &led_usb1; + led-usb2 = &led_usb2; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; +/* reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + };*/ + paging { + label = "paging"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "easy80920:green:power"; + gpios = <&stp 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + warning { + label = "easy80920:green:warning"; + gpios = <&stp 22 GPIO_ACTIVE_HIGH>; + }; + fxs1 { + label = "easy80920:green:fxs1"; + gpios = <&stp 21 GPIO_ACTIVE_HIGH>; + }; + fxs2 { + label = "easy80920:green:fxs2"; + gpios = <&stp 20 GPIO_ACTIVE_HIGH>; + }; + fxo { + label = "easy80920:green:fxo"; + gpios = <&stp 19 GPIO_ACTIVE_HIGH>; + }; + led_usb1: usb1 { + label = "easy80920:green:usb1"; + gpios = <&stp 18 GPIO_ACTIVE_HIGH>; + }; + led_usb2: usb2 { + label = "easy80920:green:usb2"; + gpios = <&stp 15 GPIO_ACTIVE_HIGH>; + }; + sd { + label = "easy80920:green:sd"; + gpios = <&stp 14 GPIO_ACTIVE_HIGH>; + }; + wps { + label = "easy80920:green:wps"; + gpios = <&stp 12 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + }; + + wan: interface@1 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + lantiq,wan; + + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin3 { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; + conf_out { + lantiq,pins = "io21", + "io33"; + lantiq,open-drain; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + conf_in { + lantiq,pins = "io39"; /* exin3 */ + lantiq,pull = <2>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; +}; + +&stp { + status = "okay"; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + /* lantiq,rising; */ +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts new file mode 100644 index 0000000000..cdba656e49 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts @@ -0,0 +1,186 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9"; + model = "Netgear DM200"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_amber; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + annexa { + gpio-export,name = "annexa"; + gpio-export,output = <0>; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + annexb { + gpio-export,name = "annexb"; + gpio-export,output = <0>; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_amber: power_amber { + label = "dm200:amber:power"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + power_green: power_green { + label = "dm200:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + lan_amber { + label = "dm200:amber:lan"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + lan_green { + label = "dm200:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + dsl_amber { + label = "dm200:amber:dsl"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + dsl_green: dsl_green { + label = "dm200:green:dsl"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð0 { + lantiq,phys = <&gphy1>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&pcie0 { + status = "disabled"; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <10000000>; + + partitions { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fixed-partitions"; + + partition@0 { + reg = <0x0 0x20000>; + label = "uboot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "gphyfirmware"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x7b0000>; + label = "firmware"; + }; + + partition@7e0000 { + reg = <0x7e0000 0x10000>; + label = "sysconfig"; + read-only; + }; + + partition@7f0000 { + reg = <0x7f0000 0x2000>; + label = "ubootconfig"; + read-only; + }; + + partition@7f2000 { + reg = <0x7f2000 0x1000>; + label = "ART"; + read-only; + }; + + partition@7f3000 { + reg = <0x7f3000 0x1000>; + label = "pot"; + read-only; + }; + + partition@7f4000 { + reg = <0x7f4000 0xc000>; + label = "ret"; + read-only; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts new file mode 100644 index 0000000000..9b3055983a --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "vr9_tplink_tdw89x0.dtsi" + +/ { + compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK TD-W8970"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts new file mode 100644 index 0000000000..725aa759d2 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts @@ -0,0 +1,33 @@ +/dts-v1/; + +#include "vr9_tplink_tdw89x0.dtsi" + +/ { + compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK TD-W8980"; + + gpio-leds { + wifi2 { + label = "tdw8980:green:wlan5ghz"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi new file mode 100644 index 0000000000..eabbc0257f --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi @@ -0,0 +1,272 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + /* the power led can't be controlled, use the wps led instead */ + led-boot = &wps; + led-failsafe = &wps; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wifi; + led-usb = &led_usb0; + led-usb2 = &led_usb2; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + /* + power is not controllable via gpio + */ + dsl: dsl { + label = "tdw89x0:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + internet: internet { + label = "tdw89x0:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + + led_usb0: usb0 { + label = "tdw89x0:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + led_usb2: usb2 { + label = "tdw89x0:green:usb2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + }; + wps: wps { + label = "tdw89x0:green:wps"; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + }; + + wifi-leds { + compatible = "gpio-leds"; + + wifi: wifi { + label = "tdw89x0:green:wifi"; + gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + }; + + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&ath9k_cal 0xf100>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + ath9k: wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + #gpio-cells = <2>; + gpio-controller; + qca,no-eeprom; + qca,disable-5ghz; + mtd-mac-address = <&ath9k_cal 0xf100>; + mtd-mac-address-increment = <2>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <33250000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x7a0000>; + label = "firmware"; + }; + + partition@7c0000 { + reg = <0x7c0000 0x10000>; + label = "config"; + read-only; + }; + + ath9k_cal: partition@7d0000 { + reg = <0x7d0000 0x30000>; + label = "boardconfig"; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dts new file mode 100644 index 0000000000..98f2282579 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +#include "vr9_tplink_vr200.dtsi" + +/ { + compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK Archer VR200"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wlan5g; + + led-usb = &led_usb; + led-usb2 = &led_usb; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + led { + label = "led"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "vr200:blue:power"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "vr200:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "vr200:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "vr200:blue:usb"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + eth { + label = "vr200:blue:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "vr200:blue:wlan"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + wlan5g: wifi { + label = "vr200:blue:wlan5g"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + led_wps { + label = "vr200:blue:wps"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi new file mode 100644 index 0000000000..93178da7e2 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi @@ -0,0 +1,194 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + memory@0 { + device_type = "memory"; + reg = <0x0 0x7f00000>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&romfile 0xf100>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <33250000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0xf90000>; + label = "firmware"; + }; + + partition@fb0000 { + reg = <0xfb0000 0x10000>; + label = "radioDECT"; + read-only; + }; + + partition@fc0000 { + reg = <0xfc0000 0x10000>; + label = "config"; + read-only; + }; + + romfile: partition@fd0000 { + reg = <0xfd0000 0x10000>; + label = "romfile"; + read-only; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "rom"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x10000>; + label = "radio"; + read-only; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200v.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200v.dts new file mode 100644 index 0000000000..2e25a72a83 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200v.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +#include "vr9_tplink_vr200.dtsi" + +/ { + compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK Archer VR200v"; + + chosen { + bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wlan5g; + + led-usb = &led_usb; + led-usb2 = &led_usb; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + dect_paging { + label = "dect_paging"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + power: power { + label = "vr200v:blue:power"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "vr200v:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "vr200v:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + led_usb: usb { + label = "vr200v:blue:usb"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + eth { + label = "vr200v:blue:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "vr200v:blue:wlan"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + wlan5g: wifi { + label = "vr200v:blue:wlan5g"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + phone { + label = "vr200v:blue:phone"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts new file mode 100644 index 0000000000..4d7aac325b --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts @@ -0,0 +1,71 @@ +/dts-v1/; + +#include "vr9_zyxel_p-2812hnu-fx.dtsi" + +/ { + compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + model = "ZyXEL P-2812HNU-F1"; + + aliases { + led-usb = &led_usb1; + led-usb2 = &led_usb2; + }; + + leds { + led_usb1: usb1 { + label = "p2812hnuf1:green:usb1"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + led_usb2: usb2 { + label = "p2812hnuf1:green:usb2"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x40000 0x20000>; + }; + partition@60000 { + label = "kernel"; + reg = <0x60000 0x300000>; + }; + partition@360000 { + label = "ubi"; + reg = <0x360000 0x7ca0000>; + }; + }; + }; +}; + +&pci0 { + wifi@1814,3062 { + compatible = "pci1814,3062"; + reg = <0x7000 0 0 0 0>; + ralink,eeprom = "RT3062.eeprom"; + }; +}; + +&pcie0 { + status = "disabled"; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts new file mode 100644 index 0000000000..7da1533809 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts @@ -0,0 +1,65 @@ +/dts-v1/; + +#include "vr9_zyxel_p-2812hnu-fx.dtsi" + +/ { + compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + model = "ZyXEL P-2812HNU-F3"; +}; + +&pci0 { + wifi@1814,3092 { + compatible = "pci1814,3092"; + reg = <0x7000 0 0 0 0>; + ralink,eeprom = "RT3092.eeprom"; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x50000>; + read-only; + }; + partition@50000 { + label = "uboot-env"; + reg = <0x50000 0x10000>; + }; + partition@60000 { + label = "unused"; + reg = <0x60000 0x7a0000>; + }; + }; + }; + + flash@1 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "ubi"; + reg = <0x200000 0x7e00000>; + }; + }; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi new file mode 100644 index 0000000000..5f8392ca44 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi @@ -0,0 +1,259 @@ +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + + led-dsl = &dsl_green; + led-internet = &internet_green; + led-wifi = &wireless_green; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + internet_red { + label = "p2812hnufx:red:internet"; + gpios = <&stp 16 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "p2812hnufx:green:internet"; + gpios = <&stp 17 GPIO_ACTIVE_LOW>; + }; + dsl_green: dsl_green { + label = "p2812hnufx:green:dsl"; + gpios = <&stp 18 GPIO_ACTIVE_LOW>; + }; + dsl_orange { + label = "p2812hnufx:orange:dsl"; + gpios = <&stp 19 GPIO_ACTIVE_LOW>; + }; + wireless_orange { + label = "p2812hnufx:orange:wlan"; + gpios = <&stp 20 GPIO_ACTIVE_LOW>; + }; + wireless_green: wireless_green { + label = "p2812hnufx:green:wlan"; + gpios = <&stp 21 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "p2812hnufx:red:power"; + gpios = <&stp 22 GPIO_ACTIVE_LOW>; + }; + power_green: power2 { + label = "p2812hnufx:green:power"; + gpios = <&stp 23 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + phone1 { + label = "p2812hnufx:green:phone"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + phone1warn { + label = "p2812hnufx:orange:phone"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + phone2warn { + label = "p2812hnufx:orange:phone2"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + phone2 { + label = "p2812hnufx:green:phone2"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + pinctrl-0 = <&mdio_pins>, + <&gphy0_led0_pins>, <&gphy0_led2_pins>, + <&gphy1_led1_pins>, <&gphy1_led2_pins>; + pinctrl-names = "default"; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin3 { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + ifxhcd-rst { + lantiq,pins = "io33"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; +}; + +&pci0 { + status = "okay"; + + pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; + pinctrl-names = "default"; + + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; +}; + +&stp { + status = "okay"; + + lantiq,shadow = <0xffffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x0>; + lantiq,phy2 = <0x0>; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/vr9.dtsi deleted file mode 100644 index 9e27830cb1..0000000000 --- a/target/linux/lantiq/files/arch/mips/boot/dts/vr9.dtsi +++ /dev/null @@ -1,477 +0,0 @@ -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xway", "lantiq,vr9"; - - aliases { - serial0 = &asc1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips34Kc"; - reg = <0>; - }; - }; - - cputemp { - compatible = "lantiq,cputemp"; - }; - - reboot { - compatible = "syscon-reboot"; - - regmap = <&rcu0>; - offset = <0x10>; - mask = <0xe0000000>; - }; - - biu@1f800000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,biu", "simple-bus"; - reg = <0x1f800000 0x800000>; - ranges = <0x0 0x1f800000 0x7fffff>; - - icu0: icu@80200 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,icu"; - reg = <0x80200 0x28 - 0x80228 0x28 - 0x80250 0x28 - 0x80278 0x28 - 0x802a0 0x28>; - }; - - watchdog@803f0 { - compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt"; - reg = <0x803f0 0x10>; - - regmap = <&rcu0>; - }; - }; - - sram@1f000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,sram", "simple-bus"; - reg = <0x1f000000 0x800000>; - ranges = <0x0 0x1f000000 0x7fffff>; - - eiu0: eiu@101000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "lantiq,eiu-xway"; - reg = <0x101000 0x1000>; - interrupt-parent = <&icu0>; - lantiq,eiu-irqs = <166 135 66 40 41 42>; - }; - - pmu0: pmu@102000 { - compatible = "lantiq,pmu-xway"; - reg = <0x102000 0x1000>; - }; - - cgu0: cgu@103000 { - compatible = "lantiq,cgu-xway"; - reg = <0x103000 0x1000>; - }; - - dcdc@106a00 { - compatible = "lantiq,dcdc-xrx200"; - reg = <0x106a00 0x200>; - }; - - vmmc: vmmc@107000 { - status = "disabled"; - compatible = "lantiq,vmmc-xway"; - reg = <0x107000 0x300>; - interrupt-parent = <&icu0>; - interrupts = <150 151 152 153 154 155>; - }; - - rcu0: rcu@203000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon"; - reg = <0x203000 0x100>; - ranges = <0x0 0x203000 0x100>; - big-endian; - - gphy0: gphy@20 { - compatible = "lantiq,xrx200-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - }; - - gphy1: gphy@68 { - compatible = "lantiq,xrx200-gphy"; - reg = <0x68 0x4>; - - resets = <&reset0 29 28>, <&reset1 6 6>; - reset-names = "gphy", "gphy2"; - }; - - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg = <0x10 4>, <0x14 4>; - - #reset-cells = <2>; - }; - - reset1: reset-controller@48 { - compatible = "lantiq,xrx200-reset"; - reg = <0x48 4>, <0x24 4>; - - #reset-cells = <2>; - }; - - usb_phy0: usb2-phy@18 { - compatible = "lantiq,xrx200-usb2-phy"; - reg = <0x18 4>, <0x38 4>; - status = "disabled"; - - resets = <&reset1 4 4>, <&reset0 4 4>; - reset-names = "phy", "ctrl"; - #phy-cells = <0>; - }; - - usb_phy1: usb2-phy@34 { - compatible = "lantiq,xrx200-usb2-phy"; - reg = <0x34 4>, <0x3c 4>; - status = "disabled"; - - resets = <&reset1 5 5>, <&reset0 4 4>; - reset-names = "phy", "ctrl"; - #phy-cells = <0>; - }; - }; - }; - - fpi@10000000 { - compatible = "lantiq,xrx200-fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xf000000>; - reg = <0x1f400000 0x1000>, - <0x10000000 0xf000000>; - regmap = <&rcu0>; - offset-endianness = <0x4c>; - #address-cells = <1>; - #size-cells = <1>; - - localbus: localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - }; - - gptu@e100a00 { - compatible = "lantiq,gptu-xway"; - reg = <0xe100a00 0x100>; - interrupt-parent = <&icu0>; - interrupts = <126 127 128 129 130 131>; - }; - - usif: usif@da00000 { - compatible = "lantiq,usif"; - reg = <0xda00000 0x1000000>; - interrupt-parent = <&icu0>; - interrupts = <29 125 107 108 109 110>; - status = "disabled"; - }; - - spi: spi@e100800 { - compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; - reg = <0xe100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <22 23 24>; - interrupt-names = "spi_rx", "spi_tx", "spi_err", - "spi_frm"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>; - status = "disabled"; - }; - - gpio: pinmux@e100b10 { - compatible = "lantiq,xrx200-pinctrl"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe100b10 0xa0>; - - gphy0_led0_pins: gphy0-led0 { - lantiq,groups = "gphy0 led0"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - gphy0_led1_pins: gphy0-led1 { - lantiq,groups = "gphy0 led1"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - gphy0_led2_pins: gphy0-led2 { - lantiq,groups = "gphy0 led2"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - gphy1_led0_pins: gphy1-led0 { - lantiq,groups = "gphy1 led0"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - gphy1_led1_pins: gphy1-led1 { - lantiq,groups = "gphy1 led1"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - gphy1_led2_pins: gphy1-led2 { - lantiq,groups = "gphy1 led2"; - lantiq,function = "gphy"; - lantiq,open-drain = <0>; - lantiq,pull = <2>; - lantiq,output = <1>; - }; - - mdio_pins: mdio { - mux { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - }; - - nand_pins: nand { - mux-0 { - lantiq,groups = "nand cle", "nand ale", - "nand rd"; - lantiq,function = "ebu"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - mux-1 { - lantiq,groups = "nand rdy"; - lantiq,function = "ebu"; - lantiq,output = <0>; - lantiq,pull = <2>; - }; - }; - - nand_cs1_pins: nand-cs1 { - mux { - lantiq,groups = "nand cs1"; - lantiq,function = "ebu"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - }; - - pci_gnt1_pins: pci-gnt1 { - lantiq,groups = "gnt1"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_req1_pins: pci-req1 { - lantiq,groups = "req1"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - - spi_pins: spi { - mux-0 { - lantiq,groups = "spi_di"; - lantiq,function = "spi"; - }; - mux-1 { - lantiq,groups = "spi_do", "spi_clk"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - - spi_cs4_pins: spi-cs4 { - mux { - lantiq,groups = "spi_cs4"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - - stp_pins: stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; - - stp: stp@e100bb0 { - status = "disabled"; - compatible = "lantiq,gpio-stp-xway"; - reg = <0xe100bb0 0x40>; - #gpio-cells = <2>; - gpio-controller; - - pinctrl-0 = <&stp_pins>; - pinctrl-names = "default"; - - lantiq,shadow = <0xffffff>; - lantiq,groups = <0x7>; - lantiq,dsl = <0x0>; - lantiq,phy1 = <0x0>; - lantiq,phy2 = <0x0>; - }; - - asc1: serial@e100c00 { - compatible = "lantiq,asc"; - reg = <0xe100c00 0x400>; - interrupt-parent = <&icu0>; - interrupts = <112 113 114>; - }; - - deu@e103100 { - compatible = "lantiq,deu-xrx200"; - reg = <0xe103100 0xf00>; - }; - - dma0: dma@e104100 { - compatible = "lantiq,dma-xway"; - reg = <0xe104100 0x800>; - }; - - ebu0: ebu@e105300 { - compatible = "lantiq,ebu-xway"; - reg = <0xe105300 0x100>; - }; - - usb0: usb@e101000 { - status = "disabled"; - compatible = "lantiq,xrx200-usb"; - reg = <0xe101000 0x1000 - 0xe120000 0x3f000>; - interrupt-parent = <&icu0>; - interrupts = <62 91>; - dr_mode = "host"; - phys = <&usb_phy0>; - phy-names = "usb2-phy"; - }; - - usb1: usb@e106000 { - status = "disabled"; - compatible = "lantiq,xrx200-usb"; - reg = <0xe106000 0x1000>; - interrupt-parent = <&icu0>; - interrupts = <91>; - dr_mode = "host"; - phys = <&usb_phy1>; - phy-names = "usb2-phy"; - }; - - eth0: eth@e108000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = < 0xe108000 0x3000 /* switch */ - 0xe10b100 0x70 /* mdio */ - 0xe10b1d8 0x30 /* mii */ - 0xe10b308 0x30 /* pmac */ - >; - interrupt-parent = <&icu0>; - interrupts = <75 73 72>; - resets = <&reset0 21 16>, <&reset0 8 8>; - reset-names = "switch", "ppe"; - lantiq,phys = <&gphy0>, <&gphy1>; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - mei@e116000 { - compatible = "lantiq,mei-xrx200"; - reg = <0xe116000 0x9c>; - interrupt-parent = <&icu0>; - interrupts = <63>; - }; - - ppe@e234000 { - compatible = "lantiq,ppe-xrx200"; - reg = <0xe234000 0x3ffd>; - interrupt-parent = <&icu0>; - interrupts = <96>; - resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>; - reset-names = "dsp", "dfe", "tc"; - }; - - pcie0: pcie@d900000 { - compatible = "lantiq,pcie-xrx200"; - - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - - reg = <0xd900000 0x1000>; - - interrupt-parent = <&icu0>; - interrupts = <161 144>; - - device_type = "pci"; - - gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>; - }; - - pci0: pci@e105400 { - status = "disabled"; - - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "lantiq,pci-xway"; - bus-range = <0x0 0x0>; - ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ - reg = <0x7000000 0x8000 /* config space */ - 0xe105400 0x400>; /* pci bridge */ - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ - req-mask = <0x1>; /* GNT1 */ - }; - }; - - vdsl { - compatible = "lantiq,vdsl-vrx200"; - }; -}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index a2052ef924..3060ff920b 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -61,6 +61,8 @@ define Device/Default KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma FILESYSTEMS := squashfs IMAGE_SIZE := + DTS_DIR := $(DTS_DIR)/lantiq + DEVICE_DTS = $$(SOC)_$(1) SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) diff --git a/target/linux/lantiq/image/amazonse.mk b/target/linux/lantiq/image/amazonse.mk index 77afaa8bed..c9329a4dd9 100644 --- a/target/linux/lantiq/image/amazonse.mk +++ b/target/linux/lantiq/image/amazonse.mk @@ -2,7 +2,7 @@ define Device/allnet_all0333cj DEVICE_VENDOR := Allnet DEVICE_MODEL := ALL0333CJ IMAGE_SIZE := 3700k - DEVICE_DTS := ALL0333CJ + SOC := amazonse DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \ kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \ ltq-adsl-app ppp-mod-pppoe @@ -13,7 +13,7 @@ define Device/netgear_dgn1000b DEVICE_VENDOR := NETGEAR DEVICE_MODEL := DGN1000B IMAGE_SIZE := 6000k - DEVICE_DTS := DGN1000B + SOC := amazonse DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \ kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \ ltq-adsl-app ppp-mod-pppoe diff --git a/target/linux/lantiq/image/ar9.mk b/target/linux/lantiq/image/ar9.mk index 272227bdb3..f86e2d1c68 100644 --- a/target/linux/lantiq/image/ar9.mk +++ b/target/linux/lantiq/image/ar9.mk @@ -1,7 +1,7 @@ define Device/avm_fritz7312 $(Device/AVM) DEVICE_MODEL := FRITZ!Box 7312 - DEVICE_DTS := FRITZ7312 + SOC := ar9 IMAGE_SIZE := 15744k DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ @@ -16,7 +16,7 @@ define Device/avm_fritz7320 DEVICE_MODEL := FRITZ!Box 7320 DEVICE_ALT0_VENDOR := 1&1 DEVICE_ALT0_MODEL := HomeServer - DEVICE_DTS := FRITZ7320 + SOC := ar9 IMAGE_SIZE := 15744k DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ @@ -33,7 +33,7 @@ define Device/bt_homehub-v3a DEVICE_MODEL := Home Hub DEVICE_VARIANT := Type A BOARD_NAME := BTHOMEHUBV3A - DEVICE_DTS := BTHOMEHUBV3A + SOC := ar9 DEVICE_PACKAGES := kmod-usb-dwc2 \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \ @@ -50,7 +50,8 @@ define Device/buffalo_wbmr-hp-g300h-a DEVICE_MODEL := WBMR-HP-G300H DEVICE_VARIANT := A IMAGE_SIZE := 31488k - DEVICE_DTS := WBMR + SOC := ar9 + DEVICE_DTS := ar9_buffalo_wbmr-hp-g300h DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \ @@ -65,7 +66,8 @@ define Device/buffalo_wbmr-hp-g300h-b DEVICE_MODEL := WBMR-HP-G300H DEVICE_VARIANT := B IMAGE_SIZE := 31488k - DEVICE_DTS := WBMR + SOC := ar9 + DEVICE_DTS := ar9_buffalo_wbmr-hp-g300h DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ @@ -80,7 +82,7 @@ DGN3500_KERNEL_OFFSET_DEC=327680 define Device/netgear_dgn3500 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := DGN3500 - DEVICE_DTS := DGN3500 + SOC := ar9 IMAGE_SIZE := 16000k IMAGES := \ sysupgrade-na.bin sysupgrade.bin \ @@ -112,7 +114,7 @@ TARGET_DEVICES += netgear_dgn3500 define Device/netgear_dgn3500b DEVICE_VENDOR := NETGEAR DEVICE_MODEL := DGN3500B - DEVICE_DTS := DGN3500B + SOC := ar9 IMAGE_SIZE := 16000k IMAGES += factory.img IMAGE/sysupgrade.bin := \ @@ -136,7 +138,7 @@ define Device/zte_h201l DEVICE_VENDOR := ZTE DEVICE_MODEL := H201L IMAGE_SIZE := 7808k - DEVICE_DTS := H201L + SOC := ar9 DEVICE_PACKAGES := kmod-ath9k-htc wpad-basic \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ @@ -152,7 +154,7 @@ define Device/zyxel_p-2601hn DEVICE_MODEL := P-2601HN DEVICE_VARIANT := F1/F3 IMAGE_SIZE := 15616k - DEVICE_DTS := P2601HNFX + SOC := ar9 DEVICE_PACKAGES := kmod-rt2800-usb wpad-basic \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ diff --git a/target/linux/lantiq/image/danube.mk b/target/linux/lantiq/image/danube.mk index 8171900a6f..2fb5ea061f 100644 --- a/target/linux/lantiq/image/danube.mk +++ b/target/linux/lantiq/image/danube.mk @@ -4,7 +4,7 @@ define Device/arcadyan_arv4510pw DEVICE_ALT0_VENDOR := Wippies DEVICE_ALT0_MODEL := BeWan iBox v1.0 IMAGE_SIZE := 15616k - DEVICE_DTS := ARV4510PW + SOC := danube DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -23,7 +23,7 @@ define Device/arcadyan_arv4519pw DEVICE_ALT1_VENDOR := Pirelli DEVICE_ALT1_MODEL := P.RG A4201G IMAGE_SIZE := 3776k - DEVICE_DTS := ARV4519PW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -38,7 +38,7 @@ define Device/arcadyan_arv7506pw11 DEVICE_ALT0_VENDOR := Alice/O2 DEVICE_ALT0_MODEL := IAD 4421 IMAGE_SIZE := 7808k - DEVICE_DTS := ARV7506PW11 + SOC := danube DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ ltq-adsl-app ppp-mod-pppoa \ @@ -53,7 +53,7 @@ define Device/arcadyan_arv7510pw22 DEVICE_ALT0_VENDOR := Astoria Networks DEVICE_ALT0_MODEL := ARV7510PW22 IMAGE_SIZE := 31232k - DEVICE_DTS := ARV7510PW22 + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -71,7 +71,7 @@ define Device/arcadyan_arv7518pw DEVICE_ALT0_VENDOR := Astoria Networks DEVICE_ALT0_MODEL := ARV7518PW IMAGE_SIZE := 7872k - DEVICE_DTS := ARV7518PW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -87,7 +87,7 @@ define Device/arcadyan_arv7519pw DEVICE_ALT0_VENDOR := Astoria Networks DEVICE_ALT0_MODEL := ARV7519PW IMAGE_SIZE := 15488k - DEVICE_DTS := ARV7519PW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -104,7 +104,7 @@ define Device/arcadyan_arv7525pw DEVICE_ALT0_MODEL := Speedport W303V DEVICE_ALT0_VARIANT := Typ A IMAGE_SIZE := 3776k - DEVICE_DTS := ARV4510PW + SOC := danube DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -119,7 +119,7 @@ define Device/arcadyan_arv752dpw DEVICE_ALT0_VENDOR := Vodafone DEVICE_ALT0_MODEL := Easybox 802 IMAGE_SIZE := 7872k - DEVICE_DTS := ARV752DPW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -136,7 +136,7 @@ define Device/arcadyan_arv752dpw22 DEVICE_ALT0_VENDOR := Vodafone DEVICE_ALT0_MODEL := Easybox 803 IMAGE_SIZE := 7616k - DEVICE_DTS := ARV752DPW22 + SOC := danube DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -153,7 +153,7 @@ define Device/arcadyan_arv8539pw22 DEVICE_ALT0_VENDOR := Telekom DEVICE_ALT0_MODEL := Speedport W504V Typ A IMAGE_SIZE := 7616k - DEVICE_DTS := ARV8539PW22 + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -167,7 +167,7 @@ define Device/audiocodes_mp-252 DEVICE_VENDOR := AudioCodes DEVICE_MODEL := MediaPack MP-252 IMAGE_SIZE := 14848k - DEVICE_DTS := ACMP252 + SOC := danube DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ kmod-ltq-tapi kmod-ltq-vmmc \ @@ -185,7 +185,7 @@ define Device/bt_homehub-v2b DEVICE_MODEL := Home Hub 2 DEVICE_VARIANT := Type B BOARD_NAME := BTHOMEHUBV2B - DEVICE_DTS := BTHOMEHUBV2B + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -199,7 +199,7 @@ TARGET_DEVICES += bt_homehub-v2b define Device/lantiq_easy50712 DEVICE_VENDOR := Lantiq DEVICE_MODEL := Danube (EASY50712) - DEVICE_DTS := EASY50712 + SOC := danube IMAGE_SIZE := 3776k endef TARGET_DEVICES += lantiq_easy50712 @@ -208,7 +208,7 @@ define Device/siemens_gigaset-sx76x DEVICE_VENDOR := Siemens DEVICE_MODEL := Gigaset sx76x IMAGE_SIZE := 7680k - DEVICE_DTS := GIGASX76X + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ diff --git a/target/linux/lantiq/image/falcon.mk b/target/linux/lantiq/image/falcon.mk index 38ba856cf8..e6aae1240b 100644 --- a/target/linux/lantiq/image/falcon.mk +++ b/target/linux/lantiq/image/falcon.mk @@ -2,7 +2,7 @@ define Device/lantiq_easy88388 DEVICE_VENDOR := Lantiq DEVICE_MODEL := EASY88388 Falcon FTTDP8 Reference Board IMAGE_SIZE := 7424k - DEVICE_DTS := EASY88388 + SOC := falcon endef TARGET_DEVICES += lantiq_easy88388 @@ -10,7 +10,7 @@ define Device/lantiq_easy88444 DEVICE_VENDOR := Lantiq DEVICE_MODEL := EASY88444 Falcon FTTdp G.FAST Reference Board IMAGE_SIZE := 7424k - DEVICE_DTS := EASY88444 + SOC := falcon endef TARGET_DEVICES += lantiq_easy88444 @@ -19,7 +19,7 @@ define Device/lantiq_easy98020 DEVICE_MODEL := Falcon SFU Reference Board (EASY98020) DEVICE_VARIANT := v1.0-v1.7 IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98020 + SOC := falcon endef TARGET_DEVICES += lantiq_easy98020 @@ -28,7 +28,7 @@ define Device/lantiq_easy98020-v18 DEVICE_MODEL := Falcon SFU Reference Board (EASY98020) DEVICE_VARIANT := v1.8 IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98020V18 + SOC := falcon endef TARGET_DEVICES += lantiq_easy98020-v18 @@ -36,7 +36,7 @@ define Device/lantiq_easy98021 DEVICE_VENDOR := Lantiq DEVICE_MODEL := Falcon HGU Reference Board (EASY98021) IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98021 + SOC := falcon endef TARGET_DEVICES += lantiq_easy98021 @@ -45,7 +45,7 @@ define Device/lantiq_easy98035synce DEVICE_MODEL := Falcon SFP Stick (EASY98035SYNCE) DEVICE_VARIANT := with Synchronous Ethernet IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98035SYNCE + SOC := falcon endef TARGET_DEVICES += lantiq_easy98035synce @@ -54,7 +54,7 @@ define Device/lantiq_easy98035synce1588 DEVICE_MODEL := Falcon SFP Stick (EASY98035SYNCE1588) DEVICE_VARIANT := with SyncE and IEEE1588 IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98035SYNCE1588 + SOC := falcon endef TARGET_DEVICES += lantiq_easy98035synce1588 @@ -63,7 +63,7 @@ define Device/lantiq_easy98000-nand DEVICE_MODEL := EASY98000 Falcon Eval Board DEVICE_VARIANT := NAND IMAGE_SIZE := 3904k - DEVICE_DTS := EASY98000NAND + SOC := falcon DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24 endef TARGET_DEVICES += lantiq_easy98000-nand @@ -73,7 +73,7 @@ define Device/lantiq_easy98000-nor DEVICE_MODEL := EASY98000 Falcon Eval Board DEVICE_VARIANT := NOR IMAGE_SIZE := 3904k - DEVICE_DTS := EASY98000NOR + SOC := falcon DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24 endef TARGET_DEVICES += lantiq_easy98000-nor @@ -83,7 +83,7 @@ define Device/lantiq_easy98000-sflash DEVICE_MODEL := EASY98000 Falcon Eval Board DEVICE_VARIANT := SFLASH IMAGE_SIZE := 7424k - DEVICE_DTS := EASY98000SFLASH + SOC := falcon DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24 endef TARGET_DEVICES += lantiq_easy98000-sflash @@ -92,7 +92,7 @@ define Device/lantiq_falcon-mdu DEVICE_VENDOR := Lantiq DEVICE_MODEL := Falcon / VINAXdp MDU Board IMAGE_SIZE := 7424k - DEVICE_DTS := FALCON-MDU + SOC := falcon endef TARGET_DEVICES += lantiq_falcon-mdu @@ -100,6 +100,6 @@ define Device/lantiq_falcon-sfp DEVICE_VENDOR := Lantiq DEVICE_MODEL := Falcon SFP Stick IMAGE_SIZE := 7424k - DEVICE_DTS := FALCON-SFP + SOC := falcon endef TARGET_DEVICES += lantiq_falcon-sfp diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk index 3be40fc947..56a7e5ca57 100644 --- a/target/linux/lantiq/image/tp-link.mk +++ b/target/linux/lantiq/image/tp-link.mk @@ -2,6 +2,7 @@ DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLIN define Device/lantiqTpLink DEVICE_VENDOR := TP-Link + SOC := vr9 TPLINK_HWREVADD := 0 TPLINK_HVERSION := 2 KERNEL := kernel-bin | append-dtb | lzma @@ -16,7 +17,6 @@ define Device/tplink_tdw8970 $(Device/lantiqTpLink) DEVICE_MODEL := TD-W8970 DEVICE_VARIANT := v1 - DEVICE_DTS := TDW8970 TPLINK_FLASHLAYOUT := 8Mltq TPLINK_HWID := 0x89700001 TPLINK_HWREV := 1 @@ -30,7 +30,6 @@ define Device/tplink_tdw8980 $(Device/lantiqTpLink) DEVICE_MODEL := TD-W8980 DEVICE_VARIANT := v1 - DEVICE_DTS := TDW8980 TPLINK_FLASHLAYOUT := 8Mltq TPLINK_HWID := 0x89800001 TPLINK_HWREV := 14 @@ -44,7 +43,6 @@ define Device/tplink_vr200 $(Device/lantiqTpLink) DEVICE_MODEL := Archer VR200 DEVICE_VARIANT := v1 - DEVICE_DTS := VR200 TPLINK_FLASHLAYOUT := 16Mltq TPLINK_HWID := 0x63e64801 TPLINK_HWREV := 0x53 @@ -58,7 +56,6 @@ define Device/tplink_vr200v $(Device/lantiqTpLink) DEVICE_MODEL := Archer VR200v DEVICE_VARIANT := v1 - DEVICE_DTS := VR200v TPLINK_FLASHLAYOUT := 16Mltq TPLINK_HWID := 0x73b70801 TPLINK_HWREV := 0x2f diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk index dee4b0d161..cd43c61e6e 100644 --- a/target/linux/lantiq/image/vr9.mk +++ b/target/linux/lantiq/image/vr9.mk @@ -3,7 +3,7 @@ define Device/alphanetworks_asl56026 DEVICE_MODEL := ASL56026 DEVICE_ALT0_VENDOR := BT Openreach DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I - DEVICE_DTS := ASL56026 + SOC := vr9 IMAGE_SIZE := 7488k endef TARGET_DEVICES += alphanetworks_asl56026 @@ -17,7 +17,7 @@ define Device/arcadyan_arv7519rw22 DEVICE_ALT1_VENDOR := Astoria Networks DEVICE_ALT1_MODEL := ARV7519RW22 IMAGE_SIZE := 31232k - DEVICE_DTS := ARV7519RW22 + SOC := vr9 DEVICE_PACKAGES := kmod-usb-dwc2 SUPPORTED_DEVICES += ARV7519RW22 endef @@ -27,7 +27,7 @@ define Device/arcadyan_vg3503j DEVICE_VENDOR := BT Openreach DEVICE_MODEL := ECI VDSL Modem V-2FUb/R IMAGE_SIZE := 8000k - DEVICE_DTS := VG3503J + SOC := vr9 SUPPORTED_DEVICES += VG3503J endef TARGET_DEVICES += arcadyan_vg3503j @@ -41,7 +41,7 @@ define Device/arcadyan_vgv7510kw22-brn DEVICE_ALT0_MODEL := Box 6431 DEVICE_ALT0_VARIANT := BRN IMAGE_SIZE := 7168k - DEVICE_DTS := VGV7510KW22BRN + SOC := vr9 SIGNATURE := BRNDA6431 MAGIC := 0x12345678 CRC32_POLY := 0x04c11db7 @@ -58,7 +58,7 @@ define Device/arcadyan_vgv7510kw22-nor DEVICE_ALT0_MODEL := Box 6431 DEVICE_ALT0_VARIANT := NOR IMAGE_SIZE := 15232k - DEVICE_DTS := VGV7510KW22NOR + SOC := vr9 DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc SUPPORTED_DEVICES += VGV7510KW22NOR endef @@ -73,7 +73,7 @@ define Device/arcadyan_vgv7519-brn DEVICE_ALT0_MODEL := Experiabox 8 DEVICE_ALT0_VARIANT := BRN IMAGE_SIZE := 7168k - DEVICE_DTS := VGV7519BRN + SOC := vr9 SIGNATURE := 5D00008000 MAGIC := 0x12345678 CRC32_POLY := 0x2083b8ed @@ -90,7 +90,7 @@ define Device/arcadyan_vgv7519-nor DEVICE_ALT0_MODEL := Experiabox 8 DEVICE_ALT0_VARIANT := NOR IMAGE_SIZE := 15360k - DEVICE_DTS := VGV7519NOR + SOC := vr9 DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc SUPPORTED_DEVICES += VGV7519NOR endef @@ -101,7 +101,7 @@ define Device/avm_fritz3370 $(Device/NAND) DEVICE_MODEL := FRITZ!Box 3370 DEVICE_VARIANT := Rev. 2 - DEVICE_DTS := FRITZ3370 + SOC := vr9 KERNEL_SIZE := 4096k UBINIZE_OPTS := -E 5 IMAGES += eva-kernel.bin eva-filesystem.bin @@ -114,7 +114,6 @@ define Device/avm_fritz3370-rev2-hynix $(Device/avm_fritz3370) DEVICE_MODEL := FRITZ!Box 3370 DEVICE_VARIANT := Rev. 2 (Hynix NAND) - DEVICE_DTS := FRITZ3370-REV2-HYNIX endef TARGET_DEVICES += avm_fritz3370-rev2-hynix @@ -122,7 +121,6 @@ define Device/avm_fritz3370-rev2-micron $(Device/avm_fritz3370) DEVICE_MODEL := FRITZ!Box 3370 DEVICE_VARIANT := Rev. 2 (Micron NAND) - DEVICE_DTS := FRITZ3370-REV2-MICRON endef TARGET_DEVICES += avm_fritz3370-rev2-micron @@ -130,7 +128,7 @@ define Device/avm_fritz7360sl $(Device/AVM) DEVICE_MODEL := FRITZ!Box 7360 SL IMAGE_SIZE := 15744k - DEVICE_DTS := FRITZ7360SL + SOC := vr9 DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 SUPPORTED_DEVICES += FRITZ7360SL endef @@ -142,7 +140,7 @@ define Device/avm_fritz7362sl DEVICE_MODEL := FRITZ!Box 7362 SL KERNEL_SIZE := 4096k IMAGE_SIZE := 49152k - DEVICE_DTS := FRITZ7362SL + SOC := vr9 DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 fritz-tffs endef TARGET_DEVICES += avm_fritz7362sl @@ -152,7 +150,7 @@ define Device/avm_fritz7412 $(Device/NAND) DEVICE_MODEL := FRITZ!Box 7412 BOARD_NAME := FRITZ7412 - DEVICE_DTS := FRITZ7412 + SOC := vr9 KERNEL_SIZE := 4096k IMAGE_SIZE := 49152k DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic fritz-tffs-nand fritz-caldata @@ -165,7 +163,7 @@ define Device/bt_homehub-v5a DEVICE_MODEL := Home Hub 5 DEVICE_VARIANT := Type A BOARD_NAME := BTHOMEHUBV5A - DEVICE_DTS := BTHOMEHUBV5A + SOC := vr9 DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \ kmod-ath10k-ct ath10k-firmware-qca988x-ct wpad-basic kmod-usb-dwc2 SUPPORTED_DEVICES += BTHOMEHUBV5A @@ -176,7 +174,7 @@ define Device/buffalo_wbmr-300hpd DEVICE_VENDOR := Buffalo DEVICE_MODEL := WBMR-300HPD IMAGE_SIZE := 15616k - DEVICE_DTS := WBMR300 + SOC := vr9 DEVICE_PACKAGES := kmod-mt7603 wpad-basic kmod-usb-dwc2 SUPPORTED_DEVICES += WBMR300 endef @@ -187,7 +185,7 @@ define Device/lantiq_easy80920-nand DEVICE_VENDOR := Lantiq DEVICE_MODEL := VR9 EASY80920 DEVICE_VARIANT := NAND - DEVICE_DTS := EASY80920NAND + SOC := vr9 IMAGE_SIZE := 64512k DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport endef @@ -197,7 +195,7 @@ define Device/lantiq_easy80920-nor DEVICE_VENDOR := Lantiq DEVICE_MODEL := VR9 EASY80920 DEVICE_VARIANT := NOR - DEVICE_DTS := EASY80920NOR + SOC := vr9 IMAGE_SIZE := 7936k DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport endef @@ -206,7 +204,7 @@ TARGET_DEVICES += lantiq_easy80920-nor define Device/netgear_dm200 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := DM200 - DEVICE_DTS := DM200 + SOC := vr9 IMAGES := sysupgrade.bin factory.img IMAGE/sysupgrade.bin := append-kernel | \ pad-offset 64k 64 | append-uImage-fakehdr filesystem | \ @@ -226,7 +224,7 @@ define Device/zyxel_p-2812hnu-f1 DEVICE_MODEL := P-2812HNU DEVICE_VARIANT := F1 BOARD_NAME := P2812HNUF1 - DEVICE_DTS := P2812HNUF1 + SOC := vr9 DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport KERNEL_SIZE := 3072k SUPPORTED_DEVICES += P2812HNUF1 @@ -239,7 +237,7 @@ define Device/zyxel_p-2812hnu-f3 DEVICE_MODEL := P-2812HNU DEVICE_VARIANT := F3 BOARD_NAME := P2812HNUF3 - DEVICE_DTS := P2812HNUF3 + SOC := vr9 DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 SUPPORTED_DEVICES += P2812HNUF3 endef diff --git a/target/linux/lantiq/image/xway_legacy.mk b/target/linux/lantiq/image/xway_legacy.mk index 011de20914..8af2e1c3fc 100644 --- a/target/linux/lantiq/image/xway_legacy.mk +++ b/target/linux/lantiq/image/xway_legacy.mk @@ -2,7 +2,7 @@ define Device/arcadyan_arv4518pwr01 DEVICE_VENDOR := Arcadyan DEVICE_MODEL := ARV4518PWR01 IMAGE_SIZE := 3776k - DEVICE_DTS := ARV4518PWR01 + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -16,7 +16,7 @@ define Device/arcadyan_arv4518pwr01a DEVICE_VENDOR := Arcadyan DEVICE_MODEL := ARV4518PWR01A IMAGE_SIZE := 3776k - DEVICE_DTS := ARV4518PWR01A + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ @@ -34,7 +34,7 @@ define Device/arcadyan_arv4520pw DEVICE_ALT1_VENDOR := Airties DEVICE_ALT1_MODEL := WAV-281 IMAGE_SIZE := 3648k - DEVICE_DTS := ARV4520PW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -51,7 +51,7 @@ define Device/arcadyan_arv4525pw DEVICE_ALT0_MODEL := Speedport W502V DEVICE_ALT0_VARIANT := Typ A IMAGE_SIZE := 3776k - DEVICE_DTS := ARV4525PW + SOC := danube DEVICE_PACKAGES := kmod-ath5k wpad-mini \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ @@ -66,7 +66,7 @@ define Device/arcadyan_arv452cqw DEVICE_ALT0_VENDOR := Vodafone DEVICE_ALT0_MODEL := Easybox 801 IMAGE_SIZE := 3776k - DEVICE_DTS := ARV452CQW + SOC := danube DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ kmod-ath5k wpad-mini \ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \