From: John Crispin Date: Wed, 28 Jan 2015 12:06:22 +0000 (+0000) Subject: ralink: check ethernet MAC address whether it is valid X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c56cf3edc7f59ed0f848a31bc307537df847238b;p=openwrt%2Fstaging%2Fyousong.git ralink: check ethernet MAC address whether it is valid The mac address usually write in factory block. but sometime user erase this block , the mac address will change to ff:ff:ff:ff:ff:ff. This patch is purpose to fix this issue. Signed-off-by: wengbj SVN-Revision: 44166 --- diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c index d7d1e8efc9..9900a5e508 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c @@ -1220,8 +1220,10 @@ static int __init fe_init(struct net_device *dev) if (priv->soc->switch_init) priv->soc->switch_init(priv); - memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN); of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr); + /*If the mac address is invalid, use default mac address */ + if (!is_valid_ether_addr(dev->dev_addr)) + memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN); err = fe_mdio_init(priv); if (err)