From: Felix Fietkau Date: Sun, 20 Apr 2008 08:39:16 +0000 (+0000) Subject: make use of the marvell switch in the atheros port X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c55299adb4ec95cb7321d8977490d6bdb19326e0;p=openwrt%2Fstaging%2Frmilecki.git make use of the marvell switch in the atheros port SVN-Revision: 10877 --- diff --git a/target/linux/atheros/base-files/etc/preinit.arch b/target/linux/atheros/base-files/etc/preinit.arch index d02e407be7c..8a1bd98cd89 100755 --- a/target/linux/atheros/base-files/etc/preinit.arch +++ b/target/linux/atheros/base-files/etc/preinit.arch @@ -1,6 +1,7 @@ # reset button only supported on ar5315+ at the moment grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && { - if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then vconfig set_name_type DEV_PLUS_VID_NO_PAD ifconfig eth0 up vconfig add eth0 0 @@ -12,7 +13,8 @@ grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && { netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" ifconfig "$ifname" 0.0.0.0 down sleep 2 - if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then vconfig rem eth0.0 ifconfig eth0 down fi diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network index e2fe6cd5e3c..61a790f8685 100644 --- a/target/linux/atheros/base-files/etc/uci-defaults/network +++ b/target/linux/atheros/base-files/etc/uci-defaults/network @@ -1,5 +1,6 @@ #!/bin/sh -if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then +if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then uci batch <