From: Michael Büsch Date: Sat, 3 Jan 2009 12:24:51 +0000 (+0000) Subject: moko: Fix 2.6.28 boot. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c53c88b8b4f38039c93f52ba0405febb9fe91818;p=openwrt%2Fstaging%2Fldir.git moko: Fix 2.6.28 boot. SVN-Revision: 13833 --- diff --git a/target/linux/s3c24xx/Makefile b/target/linux/s3c24xx/Makefile index afcbc78564..acd3b926cb 100644 --- a/target/linux/s3c24xx/Makefile +++ b/target/linux/s3c24xx/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2006 OpenWrt.org +# Copyright (C) 2006-2009 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -11,7 +11,7 @@ BOARD:=s3c24xx BOARDNAME:=s3c24xx FEATURES:=jffs2 -LINUX_VERSION:=2.6.26 +LINUX_VERSION:=2.6.28 DEVICE_TYPE=phone diff --git a/target/linux/s3c24xx/config-2.6.28 b/target/linux/s3c24xx/config-2.6.28 index 5a51d412c2..d1fe910125 100644 --- a/target/linux/s3c24xx/config-2.6.28 +++ b/target/linux/s3c24xx/config-2.6.28 @@ -581,11 +581,11 @@ CONFIG_NET_IPIP=m CONFIG_NET_KEY_MIGRATE=y # CONFIG_NET_PKTGEN is not set CONFIG_NET_SCH_NETEM=m -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD is not set +# CONFIG_NFSD_V2_ACL is not set +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFS_ACL_SUPPORT=y +# CONFIG_NFS_ACL_SUPPORT is not set # CONFIG_NFS_FS is not set CONFIG_NF_CONNTRACK=y # CONFIG_NF_CONNTRACK_AMANDA is not set @@ -648,7 +648,7 @@ CONFIG_PREEMPT=y CONFIG_PRINTK_TIME=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_PROVE_LOCKING is not set -CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y diff --git a/target/linux/s3c24xx/patches-2.6.28/0001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.28/0001-merge-openmoko.patch deleted file mode 100644 index 77be55078b..0000000000 --- a/target/linux/s3c24xx/patches-2.6.28/0001-merge-openmoko.patch +++ /dev/null @@ -1,151201 +0,0 @@ -Merge OpenMoko kernel patches -git://git.openmoko.org/git/kernel.git#andy-tracking - -mb@homer Thu Jan 1 22:58:51 UTC 2009 - ---- - -Index: linux-2.6.28/arch/arm/common/vic.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/common/vic.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/common/vic.c 2009-01-02 00:01:56.000000000 +0100 -@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, - /* - * Make sure we clear all existing interrupts - */ -- writel(0, base + VIC_VECT_ADDR); -+ writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; - -- value = readl(base + VIC_VECT_ADDR); -- writel(value, base + VIC_VECT_ADDR); -+ value = readl(base + VIC_PL190_VECT_ADDR); -+ writel(value, base + VIC_PL190_VECT_ADDR); - } - - for (i = 0; i < 16; i++) { -@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, - writel(VIC_VECT_CNTL_ENABLE | i, reg); - } - -- writel(32, base + VIC_DEF_VECT_ADDR); -+ writel(32, base + VIC_PL190_DEF_VECT_ADDR); - - for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; -Index: linux-2.6.28/arch/arm/configs/gta02-moredrivers-defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/configs/gta02-moredrivers-defconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,2107 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.28-rc4 -+# Mon Dec 29 12:13:48 2008 -+# -+CONFIG_ARM=y -+CONFIG_HAVE_PWM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_HAVE_LATENCYTOP_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_FIQ=y -+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="-mokodev" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=18 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_IPC_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_AIO=y -+CONFIG_ASHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+CONFIG_MARKERS=y -+CONFIG_HAVE_OPROFILE=y -+# CONFIG_KPROBES is not set -+CONFIG_HAVE_KPROBES=y -+CONFIG_HAVE_KRETPROBES=y -+CONFIG_HAVE_CLK=y -+CONFIG_HAVE_GENERIC_DMA_COHERENT=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+CONFIG_CLASSIC_RCU=y -+CONFIG_FREEZER=y -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KIRKWOOD is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_LOKI is not set -+# CONFIG_ARCH_MV78XX0 is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_ORION5X is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_S3C64XX is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_MSM is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C24XX_PWM=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_DEBUG is not set -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=2 -+CONFIG_S3C_GPIO_SPACE=0 -+CONFIG_S3C_GPIO_TRACK=y -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_TCT_HAMMER is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+# CONFIG_MACH_NEO1973_GTA01 is not set -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_JIVE is not set -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+CONFIG_S3C2440_C_FIQ=y -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+# CONFIG_MACH_AT2440EVB is not set -+CONFIG_MACH_NEO1973_GTA02=y -+# CONFIG_NEO1973_GTA02_2440 is not set -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_PABRT_NOIFAR=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 -+CONFIG_PREEMPT=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+CONFIG_ARCH_FLATMEM_HAS_HOLES=y -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="unused -- bootloader passes ATAG list" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# CPU Power Management -+# -+CONFIG_CPU_IDLE=y -+CONFIG_CPU_IDLE_GOV_LADDER=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_APM_EMULATION=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_NETFILTER_ADVANCED=y -+CONFIG_BRIDGE_NETFILTER=y -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK=y -+# CONFIG_NF_CT_ACCT is not set -+# CONFIG_NF_CONNTRACK_MARK is not set -+# CONFIG_NF_CONNTRACK_EVENTS is not set -+# CONFIG_NF_CT_PROTO_DCCP is not set -+# CONFIG_NF_CT_PROTO_SCTP is not set -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+# CONFIG_NF_CONNTRACK_FTP is not set -+# CONFIG_NF_CONNTRACK_H323 is not set -+# CONFIG_NF_CONNTRACK_IRC is not set -+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -+# CONFIG_NF_CONNTRACK_PPTP is not set -+# CONFIG_NF_CONNTRACK_SANE is not set -+# CONFIG_NF_CONNTRACK_SIP is not set -+# CONFIG_NF_CONNTRACK_TFTP is not set -+# CONFIG_NF_CT_NETLINK is not set -+# CONFIG_NETFILTER_TPROXY is not set -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+# CONFIG_NETFILTER_XT_MATCH_STATE is not set -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+# CONFIG_IP_VS is not set -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_DEFRAG_IPV4=y -+CONFIG_NF_CONNTRACK_IPV4=y -+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+# CONFIG_IP_NF_TARGET_NETMAP is not set -+# CONFIG_IP_NF_TARGET_REDIRECT is not set -+# CONFIG_NF_NAT_SNMP_BASIC is not set -+# CONFIG_NF_NAT_FTP is not set -+# CONFIG_NF_NAT_IRC is not set -+# CONFIG_NF_NAT_TFTP is not set -+# CONFIG_NF_NAT_AMANDA is not set -+# CONFIG_NF_NAT_PPTP is not set -+# CONFIG_NF_NAT_H323 is not set -+# CONFIG_NF_NAT_SIP is not set -+CONFIG_IP_NF_MANGLE=m -+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+# CONFIG_BRIDGE_EBT_IP6 is not set -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_ULOG=m -+# CONFIG_BRIDGE_EBT_NFLOG is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=y -+CONFIG_BRIDGE=y -+# CONFIG_NET_DSA is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=y -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_MULTIQ is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_CLS_FLOW is not set -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=y -+CONFIG_BT_L2CAP=y -+CONFIG_BT_SCO=y -+CONFIG_BT_RFCOMM=y -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=y -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=y -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIBTUSB=y -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+# CONFIG_PHONET is not set -+CONFIG_FIB_RULES=y -+CONFIG_WIRELESS=y -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_OLD_REGULATORY is not set -+CONFIG_WIRELESS_EXT=y -+CONFIG_WIRELESS_EXT_SYSFS=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+CONFIG_RFKILL=y -+CONFIG_RFKILL_INPUT=y -+CONFIG_RFKILL_LEDS=y -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_FIRMWARE_IN_KERNEL is not set -+CONFIG_EXTRA_FIRMWARE="" -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+CONFIG_MTD_ROM=y -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x0 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+# CONFIG_MTD_NAND_GPIO is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+CONFIG_MTD_NAND_S3C2410_DEBUG=y -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_LOW_MEMORY_KILLER=y -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=y -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=y -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_SCSI_DH is not set -+# CONFIG_ATA is not set -+CONFIG_MD=y -+# CONFIG_BLK_DEV_MD is not set -+CONFIG_BLK_DEV_DM=m -+# CONFIG_DM_DEBUG is not set -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+# CONFIG_DM_MIRROR is not set -+# CONFIG_DM_ZERO is not set -+# CONFIG_DM_MULTIPATH is not set -+# CONFIG_DM_DELAY is not set -+# CONFIG_DM_UEVENT is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=y -+# CONFIG_VETH is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_ENC28J60 is not set -+# CONFIG_SMC911X is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=y -+CONFIG_USB_NET_DM9601=m -+# CONFIG_USB_NET_SMSC95XX is not set -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=y -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_USB_HSO is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=y -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=y -+CONFIG_PPP_SYNC_TTY=y -+CONFIG_PPP_DEFLATE=y -+CONFIG_PPP_BSDCOMP=y -+CONFIG_PPP_MPPE=y -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=y -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_FILTER=y -+CONFIG_TOUCHSCREEN_FILTER_GROUP=y -+CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y -+CONFIG_TOUCHSCREEN_FILTER_MEAN=y -+CONFIG_TOUCHSCREEN_FILTER_LINEAR=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_TOUCHSCREEN_PCAP7200 is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+# CONFIG_INPUT_CM109 is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+CONFIG_INPUT_PCF50633_PMU=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=6 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_DEVKMEM is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_SAMSUNG=y -+CONFIG_SERIAL_SAMSUNG_UARTS=3 -+CONFIG_SERIAL_SAMSUNG_CONSOLE=y -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2440=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_HELPER_AUTO=y -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF50606 is not set -+# CONFIG_SENSORS_PCF50633 is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_SENSORS_TSL256X is not set -+CONFIG_PCA9632=y -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+# CONFIG_SPI_S3C24XX is not set -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+CONFIG_DEBUG_GPIO=y -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+CONFIG_POWER_SUPPLY_DEBUG=y -+CONFIG_PDA_POWER=y -+CONFIG_APM_POWER=y -+# CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_BQ27x00 is not set -+CONFIG_BATTERY_BQ27000_HDQ=y -+CONFIG_GTA02_HDQ=y -+CONFIG_CHARGER_PCF50633=y -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_AD7414 is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADCXX is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ADT7470 is not set -+# CONFIG_SENSORS_ADT7473 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_F71882FG is not set -+# CONFIG_SENSORS_F75375S is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM70 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_LM93 is not set -+# CONFIG_SENSORS_MAX1111 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_DME1737 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_ADS7828 is not set -+# CONFIG_SENSORS_THMC50 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83L786NG is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_ASIC3 is not set -+# CONFIG_HTC_EGPIO is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+# CONFIG_MFD_T7L66XB is not set -+# CONFIG_MFD_TC6387XB is not set -+# CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set -+CONFIG_MFD_PCF50633=y -+CONFIG_PCF50633_ADC=y -+CONFIG_PCF50633_GPIO=y -+# CONFIG_MFD_PCF50606 is not set -+CONFIG_MFD_GLAMO=y -+CONFIG_MFD_GLAMO_FB=y -+CONFIG_MFD_GLAMO_SPI_GPIO=y -+CONFIG_MFD_GLAMO_SPI_FB=y -+CONFIG_MFD_GLAMO_MCI=y -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=y -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+# CONFIG_FB_BOOT_VESA_SUPPORT is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_FB_METRONOME is not set -+# CONFIG_FB_MB862XX is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_LCD_ILI9320 is not set -+# CONFIG_LCD_TDO24M is not set -+# CONFIG_LCD_VGG2432A4 is not set -+# CONFIG_LCD_PLATFORM is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+CONFIG_BACKLIGHT_CORGI=y -+# CONFIG_BACKLIGHT_PWM is not set -+ -+# -+# Display device support -+# -+CONFIG_DISPLAY_SUPPORT=y -+ -+# -+# Display hardware drivers -+# -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=y -+CONFIG_SOUND_OSS_CORE=y -+CONFIG_SND=y -+CONFIG_SND_TIMER=y -+CONFIG_SND_PCM=y -+CONFIG_SND_HWDEP=m -+CONFIG_SND_RAWMIDI=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=y -+CONFIG_SND_PCM_OSS=y -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+CONFIG_SND_DEBUG=y -+# CONFIG_SND_DEBUG_VERBOSE is not set -+CONFIG_SND_PCM_XRUN_DEBUG=y -+CONFIG_SND_DRIVERS=y -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+CONFIG_SND_ARM=y -+# CONFIG_SND_SPI is not set -+CONFIG_SND_USB=y -+CONFIG_SND_USB_AUDIO=m -+# CONFIG_SND_USB_CAIAQ is not set -+CONFIG_SND_SOC=y -+CONFIG_SND_S3C24XX_SOC=y -+CONFIG_SND_S3C24XX_SOC_I2S=y -+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=y -+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set -+# CONFIG_SND_SOC_ALL_CODECS is not set -+CONFIG_SND_SOC_WM8753=y -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+CONFIG_HID_PID=y -+# CONFIG_USB_HIDDEV is not set -+ -+# -+# Special HID drivers -+# -+CONFIG_HID_COMPAT=y -+CONFIG_HID_A4TECH=y -+CONFIG_HID_APPLE=y -+CONFIG_HID_BELKIN=y -+CONFIG_HID_BRIGHT=y -+CONFIG_HID_CHERRY=y -+CONFIG_HID_CHICONY=y -+CONFIG_HID_CYPRESS=y -+CONFIG_HID_DELL=y -+CONFIG_HID_EZKEY=y -+CONFIG_HID_GYRATION=y -+CONFIG_HID_LOGITECH=y -+# CONFIG_LOGITECH_FF is not set -+# CONFIG_LOGIRUMBLEPAD2_FF is not set -+CONFIG_HID_MICROSOFT=y -+CONFIG_HID_MONTEREY=y -+CONFIG_HID_PANTHERLORD=y -+# CONFIG_PANTHERLORD_FF is not set -+CONFIG_HID_PETALYNX=y -+CONFIG_HID_SAMSUNG=y -+CONFIG_HID_SONY=y -+CONFIG_HID_SUNPLUS=y -+# CONFIG_THRUSTMASTER_FF is not set -+# CONFIG_ZEROPLUS_FF is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_OTG is not set -+CONFIG_USB_MON=y -+# CONFIG_USB_WUSB is not set -+# CONFIG_USB_WUSB_CBAF is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_C67X00_HCD is not set -+# CONFIG_USB_ISP116X_HCD is not set -+# CONFIG_USB_ISP1760_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+# CONFIG_USB_HWA_HCD is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=y -+CONFIG_USB_PRINTER=m -+# CONFIG_USB_WDM is not set -+CONFIG_USB_TMC=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+CONFIG_USB_STORAGE_KARMA=y -+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB port drivers -+# -+CONFIG_USB_SERIAL=y -+CONFIG_USB_SERIAL_CONSOLE=y -+CONFIG_USB_EZUSB=y -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+# CONFIG_USB_SERIAL_IUU is not set -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+# CONFIG_USB_SERIAL_MOTOROLA is not set -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+# CONFIG_USB_SERIAL_SPCP8X5 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=y -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_SEVSEG is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+CONFIG_USB_BERRY_CHARGE=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+# CONFIG_USB_TEST is not set -+# CONFIG_USB_ISIGHTFW is not set -+# CONFIG_USB_VST is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_VBUS_DRAW=500 -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+CONFIG_USB_S3C2410_DEBUG=y -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_QE is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_AR6000_WLAN=y -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD/SDIO Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD/SDIO Host Controller Drivers -+# -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_S3C=y -+# CONFIG_MMC_SPI is not set -+CONFIG_MMC_S3C=y -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+CONFIG_LEDS_NEO1973_VIBRATOR=y -+CONFIG_LEDS_NEO1973_GTA02=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_LEDS_TRIGGER_BACKLIGHT=y -+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+CONFIG_RTC_DRV_PCF50633=y -+# CONFIG_RTC_DRV_PCF50606 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_DS3234 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1286 is not set -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T35 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_BQ4802 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+ -+# -+# Android -+# -+CONFIG_ANDROID_BINDER_IPC=y -+CONFIG_ANDROID_POWER=y -+CONFIG_ANDROID_POWER_STAT=y -+CONFIG_ANDROID_POWER_ALARM=y -+CONFIG_ANDROID_LOGGER=y -+# CONFIG_ANDROID_RAM_CONSOLE is not set -+# CONFIG_ANDROID_TIMED_GPIO is not set -+# CONFIG_ANDROID_PARANOID_NETWORK is not set -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_DEBUG=y -+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -+# CONFIG_REGULATOR_BQ24022 is not set -+CONFIG_REGULATOR_PCF50633=y -+CONFIG_UIO=y -+CONFIG_UIO_PDRV=y -+# CONFIG_UIO_PDRV_GENIRQ is not set -+# CONFIG_UIO_SMX is not set -+# CONFIG_UIO_SERCOS3 is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4DEV_COMPAT=y -+CONFIG_EXT4_FS_XATTR=y -+# CONFIG_EXT4_FS_POSIX_ACL is not set -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_JBD2=y -+# CONFIG_JBD2_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+CONFIG_FILE_LOCKING=y -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+# CONFIG_NFS_FS is not set -+CONFIG_NFSD=y -+CONFIG_NFSD_V2_ACL=y -+CONFIG_NFSD_V3=y -+CONFIG_NFSD_V3_ACL=y -+# CONFIG_NFSD_V4 is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=y -+CONFIG_NFS_ACL_SUPPORT=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_SUNRPC_REGISTER_V4 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+# CONFIG_CIFS_WEAK_PW_HASH is not set -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_PRINTK_TIME=y -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DEBUG_SHIRQ=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 -+CONFIG_SCHED_DEBUG=y -+CONFIG_SCHEDSTATS=y -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+CONFIG_DEBUG_MUTEXES=y -+CONFIG_DEBUG_LOCK_ALLOC=y -+# CONFIG_PROVE_LOCKING is not set -+CONFIG_LOCKDEP=y -+CONFIG_LOCK_STAT=y -+CONFIG_DEBUG_LOCKDEP=y -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+CONFIG_STACKTRACE=y -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+CONFIG_DEBUG_MEMORY_INIT=y -+# CONFIG_DEBUG_LIST is not set -+CONFIG_DEBUG_SG=y -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+CONFIG_RCU_CPU_STALL_DETECTOR=y -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -+# CONFIG_FAULT_INJECTION is not set -+CONFIG_LATENCYTOP=y -+CONFIG_SYSCTL_SYSCALL_CHECK=y -+CONFIG_HAVE_FUNCTION_TRACER=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set -+# CONFIG_SCHED_TRACER is not set -+# CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_STACK_TRACER is not set -+CONFIG_DYNAMIC_PRINTK_DEBUG=y -+# CONFIG_SAMPLES is not set -+CONFIG_HAVE_ARCH_KGDB=y -+# CONFIG_KGDB is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_STACK_USAGE is not set -+# CONFIG_DEBUG_LL is not set -+CONFIG_DEBUG_S3C_UART=2 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+CONFIG_SECURITYFS=y -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_FIPS=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_RNG=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_NULL=m -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+CONFIG_CRYPTO_TEST=m -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=y -+CONFIG_CRYPTO_LRW=m -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+ -+# -+# Digest -+# -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_MICHAEL_MIC=m -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=y -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+ -+# -+# Ciphers -+# -+CONFIG_CRYPTO_AES=y -+CONFIG_CRYPTO_ANUBIS=m -+CONFIG_CRYPTO_ARC4=y -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_KHAZAD=m -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_LZO is not set -+ -+# -+# Random Number Generation -+# -+CONFIG_CRYPTO_ANSI_CPRNG=y -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+CONFIG_CRC16=y -+CONFIG_CRC_T10DIF=y -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.28/arch/arm/configs/gta02-packaging-defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/configs/gta02-packaging-defconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,2111 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.28-rc4 -+# Wed Dec 10 11:09:39 2008 -+# -+CONFIG_ARM=y -+CONFIG_HAVE_PWM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_HAVE_LATENCYTOP_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_FIQ=y -+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_LOCK_KERNEL=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="-mokodev" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=18 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_IPC_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_AIO=y -+CONFIG_ASHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLAB=y -+# CONFIG_SLUB is not set -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+CONFIG_MARKERS=y -+CONFIG_HAVE_OPROFILE=y -+# CONFIG_KPROBES is not set -+CONFIG_HAVE_KPROBES=y -+CONFIG_HAVE_KRETPROBES=y -+CONFIG_HAVE_CLK=y -+CONFIG_HAVE_GENERIC_DMA_COHERENT=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=m -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=m -+# CONFIG_DEFAULT_AS is not set -+CONFIG_DEFAULT_DEADLINE=y -+# CONFIG_DEFAULT_CFQ is not set -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="deadline" -+CONFIG_CLASSIC_RCU=y -+CONFIG_FREEZER=y -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KIRKWOOD is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_LOKI is not set -+# CONFIG_ARCH_MV78XX0 is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_ORION5X is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+CONFIG_ARCH_S3C2410=y -+# CONFIG_ARCH_S3C64XX is not set -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_MSM is not set -+CONFIG_PLAT_S3C24XX=y -+CONFIG_S3C2410_CLOCK=y -+CONFIG_CPU_S3C244X=y -+CONFIG_S3C24XX_PWM=y -+CONFIG_S3C2410_DMA=y -+# CONFIG_S3C2410_DMA_DEBUG is not set -+CONFIG_MACH_SMDK=y -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C=y -+CONFIG_CPU_LLSERIAL_S3C2410=y -+CONFIG_CPU_LLSERIAL_S3C2440=y -+ -+# -+# Boot options -+# -+# CONFIG_S3C_BOOT_WATCHDOG is not set -+# CONFIG_S3C_BOOT_ERROR_RESET is not set -+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_DEBUG is not set -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=2 -+CONFIG_S3C_GPIO_SPACE=0 -+CONFIG_S3C_GPIO_TRACK=y -+ -+# -+# S3C2400 Machines -+# -+CONFIG_CPU_S3C2410=y -+CONFIG_CPU_S3C2410_DMA=y -+CONFIG_S3C2410_PM=y -+CONFIG_S3C2410_GPIO=y -+CONFIG_S3C2410_PWM=y -+ -+# -+# S3C2410 Machines -+# -+# CONFIG_ARCH_SMDK2410 is not set -+# CONFIG_ARCH_H1940 is not set -+# CONFIG_MACH_N30 is not set -+# CONFIG_ARCH_BAST is not set -+# CONFIG_MACH_OTOM is not set -+# CONFIG_MACH_AML_M5900 is not set -+# CONFIG_MACH_TCT_HAMMER is not set -+# CONFIG_MACH_VR1000 is not set -+CONFIG_MACH_QT2410=y -+# CONFIG_MACH_NEO1973_GTA01 is not set -+ -+# -+# S3C2412 Machines -+# -+# CONFIG_MACH_JIVE is not set -+# CONFIG_MACH_SMDK2413 is not set -+# CONFIG_MACH_SMDK2412 is not set -+# CONFIG_MACH_VSTMS is not set -+CONFIG_CPU_S3C2440=y -+CONFIG_S3C2440_DMA=y -+CONFIG_S3C2440_C_FIQ=y -+ -+# -+# S3C2440 Machines -+# -+# CONFIG_MACH_ANUBIS is not set -+# CONFIG_MACH_OSIRIS is not set -+# CONFIG_MACH_RX3715 is not set -+CONFIG_ARCH_S3C2440=y -+# CONFIG_MACH_NEXCODER_2440 is not set -+CONFIG_SMDK2440_CPU2440=y -+# CONFIG_MACH_AT2440EVB is not set -+CONFIG_MACH_NEO1973_GTA02=y -+# CONFIG_NEO1973_GTA02_2440 is not set -+CONFIG_CPU_S3C2442=y -+ -+# -+# S3C2442 Machines -+# -+CONFIG_SMDK2440_CPU2442=y -+ -+# -+# S3C2443 Machines -+# -+# CONFIG_MACH_SMDK2443 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_ARM920T=y -+CONFIG_CPU_32v4T=y -+CONFIG_CPU_ABRT_EV4T=y -+CONFIG_CPU_PABRT_NOIFAR=y -+CONFIG_CPU_CACHE_V4WT=y -+CONFIG_CPU_CACHE_VIVT=y -+CONFIG_CPU_COPY_V4WB=y -+CONFIG_CPU_TLB_V4WBI=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -+# CONFIG_OUTER_CACHE is not set -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 -+CONFIG_PREEMPT=y -+CONFIG_HZ=200 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+CONFIG_ARCH_FLATMEM_HAS_HOLES=y -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4096 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="unused -- bootloader passes ATAG list" -+# CONFIG_XIP_KERNEL is not set -+CONFIG_KEXEC=y -+CONFIG_ATAGS_PROC=y -+ -+# -+# CPU Power Management -+# -+CONFIG_CPU_IDLE=y -+CONFIG_CPU_IDLE_GOV_LADDER=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+CONFIG_FPE_NWFPE=y -+# CONFIG_FPE_NWFPE_XP is not set -+# CONFIG_FPE_FASTFPE is not set -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_APM_EMULATION=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+CONFIG_NET_KEY_MIGRATE=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_NET_IPGRE_BROADCAST is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_TUNNEL=m -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_NETFILTER_ADVANCED=y -+CONFIG_BRIDGE_NETFILTER=y -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_QUEUE=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CT_ACCT=y -+CONFIG_NF_CONNTRACK_MARK=y -+# CONFIG_NF_CONNTRACK_EVENTS is not set -+# CONFIG_NF_CT_PROTO_DCCP is not set -+CONFIG_NF_CT_PROTO_GRE=m -+CONFIG_NF_CT_PROTO_SCTP=m -+# CONFIG_NF_CT_PROTO_UDPLITE is not set -+# CONFIG_NF_CONNTRACK_AMANDA is not set -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+# CONFIG_NETFILTER_TPROXY is not set -+CONFIG_NETFILTER_XTABLES=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -+CONFIG_NETFILTER_XT_MATCH_SCTP=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+# CONFIG_IP_VS is not set -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_DEFRAG_IPV4=m -+CONFIG_NF_CONNTRACK_IPV4=m -+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set -+# CONFIG_IP_NF_QUEUE is not set -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_ADDRTYPE=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+CONFIG_IP_NF_TARGET_ULOG=m -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_NF_NAT_SNMP_BASIC=m -+CONFIG_NF_NAT_PROTO_GRE=m -+CONFIG_NF_NAT_PROTO_SCTP=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+CONFIG_NF_NAT_TFTP=m -+# CONFIG_NF_NAT_AMANDA is not set -+CONFIG_NF_NAT_PPTP=m -+CONFIG_NF_NAT_H323=m -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+# CONFIG_IP_NF_RAW is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_TARGET_HL=m -+# CONFIG_IP6_NF_RAW is not set -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+# CONFIG_BRIDGE_EBT_IP6 is not set -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_ULOG=m -+# CONFIG_BRIDGE_EBT_NFLOG is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=y -+CONFIG_BRIDGE=y -+# CONFIG_NET_DSA is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=y -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+CONFIG_NET_SCHED=y -+ -+# -+# Queueing/Scheduling -+# -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+# CONFIG_NET_SCH_MULTIQ is not set -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+ -+# -+# Classification -+# -+CONFIG_NET_CLS=y -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_ROUTE=y -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_PERF=y -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+# CONFIG_NET_CLS_FLOW is not set -+# CONFIG_NET_EMATCH is not set -+# CONFIG_NET_CLS_ACT is not set -+# CONFIG_NET_CLS_IND is not set -+CONFIG_NET_SCH_FIFO=y -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+CONFIG_BT=m -+CONFIG_BT_L2CAP=m -+CONFIG_BT_SCO=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+ -+# -+# Bluetooth device drivers -+# -+CONFIG_BT_HCIBTUSB=m -+# CONFIG_BT_HCIBTSDIO is not set -+# CONFIG_BT_HCIUART is not set -+# CONFIG_BT_HCIBCM203X is not set -+# CONFIG_BT_HCIBPA10X is not set -+# CONFIG_BT_HCIBFUSB is not set -+# CONFIG_BT_HCIVHCI is not set -+# CONFIG_AF_RXRPC is not set -+# CONFIG_PHONET is not set -+CONFIG_FIB_RULES=y -+CONFIG_WIRELESS=y -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_OLD_REGULATORY is not set -+CONFIG_WIRELESS_EXT=y -+CONFIG_WIRELESS_EXT_SYSFS=y -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+CONFIG_RFKILL=y -+CONFIG_RFKILL_INPUT=y -+CONFIG_RFKILL_LEDS=y -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+# CONFIG_FIRMWARE_IN_KERNEL is not set -+CONFIG_EXTRA_FIRMWARE="" -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+CONFIG_CONNECTOR=m -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+CONFIG_MTD_CONCAT=y -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+CONFIG_MTD_CFI_INTELEXT=y -+# CONFIG_MTD_CFI_AMDSTD is not set -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+CONFIG_MTD_ROM=y -+CONFIG_MTD_ABSENT=y -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x0 -+CONFIG_MTD_PHYSMAP_LEN=0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_ARM_INTEGRATOR is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_VERIFY_WRITE=y -+# CONFIG_MTD_NAND_ECC_SMC is not set -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+# CONFIG_MTD_NAND_GPIO is not set -+CONFIG_MTD_NAND_IDS=y -+CONFIG_MTD_NAND_S3C2410=y -+CONFIG_MTD_NAND_S3C2410_DEBUG=y -+CONFIG_MTD_NAND_S3C2410_HWECC=y -+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_UB=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_LOW_MEMORY_KILLER=y -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_CHR_DEV_SG=m -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+CONFIG_SCSI_MULTI_LUN=y -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+CONFIG_SCSI_SCAN_ASYNC=y -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_SCSI_DEBUG is not set -+# CONFIG_SCSI_DH is not set -+# CONFIG_ATA is not set -+CONFIG_MD=y -+# CONFIG_BLK_DEV_MD is not set -+CONFIG_BLK_DEV_DM=m -+# CONFIG_DM_DEBUG is not set -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+# CONFIG_DM_MIRROR is not set -+# CONFIG_DM_ZERO is not set -+# CONFIG_DM_MULTIPATH is not set -+# CONFIG_DM_DELAY is not set -+# CONFIG_DM_UEVENT is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=m -+# CONFIG_VETH is not set -+# CONFIG_PHYLIB is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=y -+# CONFIG_AX88796 is not set -+# CONFIG_SMC91X is not set -+# CONFIG_DM9000 is not set -+# CONFIG_ENC28J60 is not set -+# CONFIG_SMC911X is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_DM9601=m -+# CONFIG_USB_NET_SMSC95XX is not set -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_RNDIS_HOST=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+# CONFIG_USB_HSO is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+CONFIG_KEYBOARD_STOWAWAY=m -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_KEYBOARD_QT2410=y -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_FILTER=y -+CONFIG_TOUCHSCREEN_FILTER_GROUP=y -+CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y -+CONFIG_TOUCHSCREEN_FILTER_MEAN=y -+CONFIG_TOUCHSCREEN_FILTER_LINEAR=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+CONFIG_TOUCHSCREEN_S3C2410=y -+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_TOUCHSCREEN_PCAP7200 is not set -+CONFIG_INPUT_MISC=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+# CONFIG_INPUT_CM109 is not set -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_LIS302DL=y -+CONFIG_INPUT_PCF50633_PMU=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+# CONFIG_SERIO_SERPORT is not set -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=6 -+CONFIG_HW_CONSOLE=y -+CONFIG_VT_HW_CONSOLE_BINDING=y -+# CONFIG_DEVKMEM is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_SAMSUNG=y -+CONFIG_SERIAL_SAMSUNG_UARTS=3 -+CONFIG_SERIAL_SAMSUNG_CONSOLE=y -+CONFIG_SERIAL_S3C2410=y -+CONFIG_SERIAL_S3C2440=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_HELPER_AUTO=y -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_TINY_USB is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF50606 is not set -+# CONFIG_SENSORS_PCF50633 is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_SENSORS_TSL256X is not set -+CONFIG_PCA9632=y -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+# CONFIG_SPI_S3C24XX is not set -+CONFIG_SPI_S3C24XX_GPIO=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+CONFIG_DEBUG_GPIO=y -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+CONFIG_POWER_SUPPLY_DEBUG=y -+CONFIG_PDA_POWER=y -+CONFIG_APM_POWER=y -+# CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_BQ27x00 is not set -+CONFIG_BATTERY_BQ27000_HDQ=y -+CONFIG_GTA02_HDQ=y -+CONFIG_CHARGER_PCF50633=y -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_AD7414 is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADCXX is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ADT7470 is not set -+# CONFIG_SENSORS_ADT7473 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_F71882FG is not set -+# CONFIG_SENSORS_F75375S is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM70 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_LM93 is not set -+# CONFIG_SENSORS_MAX1111 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_DME1737 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_ADS7828 is not set -+# CONFIG_SENSORS_THMC50 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83L786NG is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_S3C2410_WATCHDOG=m -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_ASIC3 is not set -+# CONFIG_HTC_EGPIO is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+# CONFIG_MFD_T7L66XB is not set -+# CONFIG_MFD_TC6387XB is not set -+# CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set -+CONFIG_MFD_PCF50633=y -+CONFIG_PCF50633_ADC=y -+CONFIG_PCF50633_GPIO=y -+# CONFIG_MFD_PCF50606 is not set -+CONFIG_MFD_GLAMO=y -+CONFIG_MFD_GLAMO_FB=y -+CONFIG_MFD_GLAMO_SPI_GPIO=y -+CONFIG_MFD_GLAMO_SPI_FB=y -+CONFIG_MFD_GLAMO_MCI=y -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+CONFIG_VIDEO_OUTPUT_CONTROL=y -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+# CONFIG_FB_BOOT_VESA_SUPPORT is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_UVESA is not set -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C2410=y -+# CONFIG_FB_S3C2410_DEBUG is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_FB_METRONOME is not set -+# CONFIG_FB_MB862XX is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_LCD_ILI9320 is not set -+# CONFIG_LCD_TDO24M is not set -+# CONFIG_LCD_VGG2432A4 is not set -+# CONFIG_LCD_PLATFORM is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+CONFIG_BACKLIGHT_CORGI=y -+# CONFIG_BACKLIGHT_PWM is not set -+ -+# -+# Display device support -+# -+CONFIG_DISPLAY_SUPPORT=y -+ -+# -+# Display hardware drivers -+# -+CONFIG_DISPLAY_JBT6K74=y -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -+CONFIG_FONTS=y -+# CONFIG_FONT_8x8 is not set -+# CONFIG_FONT_8x16 is not set -+CONFIG_FONT_6x11=y -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=y -+CONFIG_SOUND_OSS_CORE=y -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+CONFIG_SND_HWDEP=m -+CONFIG_SND_RAWMIDI=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+CONFIG_SND_DEBUG=y -+# CONFIG_SND_DEBUG_VERBOSE is not set -+CONFIG_SND_PCM_XRUN_DEBUG=y -+CONFIG_SND_DRIVERS=y -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+CONFIG_SND_ARM=y -+# CONFIG_SND_SPI is not set -+CONFIG_SND_USB=y -+CONFIG_SND_USB_AUDIO=m -+# CONFIG_SND_USB_CAIAQ is not set -+CONFIG_SND_SOC=m -+CONFIG_SND_S3C24XX_SOC=m -+CONFIG_SND_S3C24XX_SOC_I2S=m -+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m -+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set -+# CONFIG_SND_SOC_ALL_CODECS is not set -+CONFIG_SND_SOC_WM8753=m -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+CONFIG_HID_PID=y -+# CONFIG_USB_HIDDEV is not set -+ -+# -+# Special HID drivers -+# -+CONFIG_HID_COMPAT=y -+CONFIG_HID_A4TECH=y -+CONFIG_HID_APPLE=y -+CONFIG_HID_BELKIN=y -+CONFIG_HID_BRIGHT=y -+CONFIG_HID_CHERRY=y -+CONFIG_HID_CHICONY=y -+CONFIG_HID_CYPRESS=y -+CONFIG_HID_DELL=y -+CONFIG_HID_EZKEY=y -+CONFIG_HID_GYRATION=y -+CONFIG_HID_LOGITECH=y -+# CONFIG_LOGITECH_FF is not set -+# CONFIG_LOGIRUMBLEPAD2_FF is not set -+CONFIG_HID_MICROSOFT=y -+CONFIG_HID_MONTEREY=y -+CONFIG_HID_PANTHERLORD=y -+# CONFIG_PANTHERLORD_FF is not set -+CONFIG_HID_PETALYNX=y -+CONFIG_HID_SAMSUNG=y -+CONFIG_HID_SONY=y -+CONFIG_HID_SUNPLUS=y -+# CONFIG_THRUSTMASTER_FF is not set -+# CONFIG_ZEROPLUS_FF is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_OTG is not set -+CONFIG_USB_MON=y -+# CONFIG_USB_WUSB is not set -+# CONFIG_USB_WUSB_CBAF is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_C67X00_HCD is not set -+# CONFIG_USB_ISP116X_HCD is not set -+# CONFIG_USB_ISP1760_HCD is not set -+CONFIG_USB_OHCI_HCD=m -+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+# CONFIG_USB_HWA_HCD is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+# CONFIG_USB_WDM is not set -+CONFIG_USB_TMC=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+CONFIG_USB_STORAGE_DATAFAB=y -+CONFIG_USB_STORAGE_FREECOM=y -+# CONFIG_USB_STORAGE_ISD200 is not set -+CONFIG_USB_STORAGE_DPCM=y -+CONFIG_USB_STORAGE_USBAT=y -+CONFIG_USB_STORAGE_SDDR09=y -+CONFIG_USB_STORAGE_SDDR55=y -+CONFIG_USB_STORAGE_JUMPSHOT=y -+CONFIG_USB_STORAGE_ALAUDA=y -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+CONFIG_USB_STORAGE_KARMA=y -+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -+CONFIG_USB_LIBUSUAL=y -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB port drivers -+# -+CONFIG_USB_SERIAL=m -+CONFIG_USB_EZUSB=y -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+# CONFIG_USB_SERIAL_CH341 is not set -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP2101=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_FUNSOFT=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+# CONFIG_USB_SERIAL_IUU is not set -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+# CONFIG_USB_SERIAL_MOTOROLA is not set -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+# CONFIG_USB_SERIAL_SPCP8X5 is not set -+CONFIG_USB_SERIAL_HP4X=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SAFE_PADDED=y -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+# CONFIG_USB_SERIAL_DEBUG is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_SEVSEG is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+CONFIG_USB_BERRY_CHARGE=m -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+# CONFIG_USB_TEST is not set -+# CONFIG_USB_ISIGHTFW is not set -+# CONFIG_USB_VST is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_VBUS_DRAW=500 -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+CONFIG_USB_GADGET_S3C2410=y -+CONFIG_USB_S3C2410=y -+CONFIG_USB_S3C2410_DEBUG=y -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_QE is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+# CONFIG_USB_GADGET_DUALSPEED is not set -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+CONFIG_USB_MIDI_GADGET=m -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_AR6000_WLAN=y -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD/SDIO Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD/SDIO Host Controller Drivers -+# -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_S3C=y -+# CONFIG_MMC_SPI is not set -+CONFIG_MMC_S3C=y -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_S3C24XX=m -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+CONFIG_LEDS_NEO1973_VIBRATOR=y -+CONFIG_LEDS_NEO1973_GTA02=y -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+CONFIG_LEDS_TRIGGER_BACKLIGHT=y -+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+CONFIG_RTC_DEBUG=y -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+CONFIG_RTC_DRV_PCF50633=y -+# CONFIG_RTC_DRV_PCF50606 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_DS3234 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1286 is not set -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T35 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_BQ4802 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_S3C=m -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+ -+# -+# Android -+# -+CONFIG_ANDROID_BINDER_IPC=y -+CONFIG_ANDROID_POWER=y -+CONFIG_ANDROID_POWER_STAT=y -+CONFIG_ANDROID_POWER_ALARM=y -+CONFIG_ANDROID_LOGGER=y -+# CONFIG_ANDROID_RAM_CONSOLE is not set -+# CONFIG_ANDROID_TIMED_GPIO is not set -+# CONFIG_ANDROID_PARANOID_NETWORK is not set -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_DEBUG=y -+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -+# CONFIG_REGULATOR_BQ24022 is not set -+CONFIG_REGULATOR_PCF50633=y -+CONFIG_UIO=y -+CONFIG_UIO_PDRV=y -+# CONFIG_UIO_PDRV_GENIRQ is not set -+# CONFIG_UIO_SMX is not set -+# CONFIG_UIO_SERCOS3 is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+CONFIG_EXT4_FS=y -+CONFIG_EXT4DEV_COMPAT=y -+CONFIG_EXT4_FS_XATTR=y -+# CONFIG_EXT4_FS_POSIX_ACL is not set -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_JBD2=y -+# CONFIG_JBD2_DEBUG is not set -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+CONFIG_FILE_LOCKING=y -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+CONFIG_AUTOFS4_FS=m -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+CONFIG_UDF_FS=m -+CONFIG_UDF_NLS=y -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=m -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+# CONFIG_NFS_FS is not set -+CONFIG_NFSD=m -+CONFIG_NFSD_V2_ACL=y -+CONFIG_NFSD_V3=y -+CONFIG_NFSD_V3_ACL=y -+# CONFIG_NFSD_V4 is not set -+CONFIG_LOCKD=m -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_ACL_SUPPORT=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=m -+# CONFIG_SUNRPC_REGISTER_V4 is not set -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+# CONFIG_CIFS_WEAK_PW_HASH is not set -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_PRINTK_TIME=y -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+CONFIG_DEBUG_SHIRQ=y -+CONFIG_DETECT_SOFTLOCKUP=y -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 -+CONFIG_SCHED_DEBUG=y -+CONFIG_SCHEDSTATS=y -+CONFIG_TIMER_STATS=y -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_DEBUG_SLAB is not set -+CONFIG_DEBUG_PREEMPT=y -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+CONFIG_DEBUG_MUTEXES=y -+CONFIG_DEBUG_LOCK_ALLOC=y -+# CONFIG_PROVE_LOCKING is not set -+CONFIG_LOCKDEP=y -+CONFIG_LOCK_STAT=y -+CONFIG_DEBUG_LOCKDEP=y -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+CONFIG_STACKTRACE=y -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+CONFIG_DEBUG_MEMORY_INIT=y -+# CONFIG_DEBUG_LIST is not set -+CONFIG_DEBUG_SG=y -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+CONFIG_RCU_CPU_STALL_DETECTOR=y -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -+# CONFIG_FAULT_INJECTION is not set -+CONFIG_LATENCYTOP=y -+CONFIG_SYSCTL_SYSCALL_CHECK=y -+CONFIG_HAVE_FUNCTION_TRACER=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set -+# CONFIG_SCHED_TRACER is not set -+# CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_STACK_TRACER is not set -+CONFIG_DYNAMIC_PRINTK_DEBUG=y -+# CONFIG_SAMPLES is not set -+CONFIG_HAVE_ARCH_KGDB=y -+# CONFIG_KGDB is not set -+# CONFIG_DEBUG_USER is not set -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_STACK_USAGE is not set -+# CONFIG_DEBUG_LL is not set -+CONFIG_DEBUG_S3C_UART=2 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+CONFIG_SECURITYFS=y -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_FIPS=y -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_RNG=y -+CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_GF128MUL=m -+CONFIG_CRYPTO_NULL=m -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+CONFIG_CRYPTO_TEST=m -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=m -+CONFIG_CRYPTO_LRW=m -+CONFIG_CRYPTO_PCBC=m -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=y -+CONFIG_CRYPTO_XCBC=m -+ -+# -+# Digest -+# -+CONFIG_CRYPTO_CRC32C=m -+CONFIG_CRYPTO_MD4=m -+CONFIG_CRYPTO_MD5=y -+CONFIG_CRYPTO_MICHAEL_MIC=m -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=m -+CONFIG_CRYPTO_SHA256=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+ -+# -+# Ciphers -+# -+CONFIG_CRYPTO_AES=y -+CONFIG_CRYPTO_ANUBIS=m -+CONFIG_CRYPTO_ARC4=m -+CONFIG_CRYPTO_BLOWFISH=m -+CONFIG_CRYPTO_CAMELLIA=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_CAST6=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_FCRYPT=m -+CONFIG_CRYPTO_KHAZAD=m -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+CONFIG_CRYPTO_SERPENT=m -+CONFIG_CRYPTO_TEA=m -+CONFIG_CRYPTO_TWOFISH=m -+CONFIG_CRYPTO_TWOFISH_COMMON=m -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_LZO is not set -+ -+# -+# Random Number Generation -+# -+CONFIG_CRYPTO_ANSI_CPRNG=y -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=y -+CONFIG_CRC_T10DIF=y -+CONFIG_CRC_ITU_T=m -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+CONFIG_LIBCRC32C=m -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_TEXTSEARCH=y -+CONFIG_TEXTSEARCH_KMP=m -+CONFIG_TEXTSEARCH_BM=m -+CONFIG_TEXTSEARCH_FSM=m -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.28/arch/arm/configs/gta03_defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/configs/gta03_defconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,1548 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.28-rc4 -+# Fri Dec 12 12:07:49 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_HAVE_LATENCYTOP_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+# CONFIG_SYSVIPC is not set -+# CONFIG_POSIX_MQUEUE is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+CONFIG_IKCONFIG=y -+CONFIG_IKCONFIG_PROC=y -+CONFIG_LOG_BUF_SHIFT=18 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_AIO=y -+CONFIG_ASHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+CONFIG_HAVE_OPROFILE=y -+# CONFIG_KPROBES is not set -+CONFIG_HAVE_KPROBES=y -+CONFIG_HAVE_KRETPROBES=y -+CONFIG_HAVE_CLK=y -+CONFIG_HAVE_GENERIC_DMA_COHERENT=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+CONFIG_LSF=y -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+CONFIG_FREEZER=y -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KIRKWOOD is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_LOKI is not set -+# CONFIG_ARCH_MV78XX0 is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_ORION5X is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+CONFIG_ARCH_S3C64XX=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_MSM is not set -+CONFIG_MACH_NEO1973=y -+CONFIG_PLAT_S3C64XX=y -+CONFIG_CPU_S3C6400_INIT=y -+CONFIG_CPU_S3C6400_CLOCK=y -+CONFIG_S3C64XX_SETUP_I2C0=y -+CONFIG_S3C64XX_SETUP_I2C1=y -+CONFIG_S3C64XX_SETUP_FB_24BPP=y -+CONFIG_PLAT_S3C=y -+ -+# -+# Boot options -+# -+CONFIG_S3C_BOOT_ERROR_RESET=y -+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y -+ -+# -+# Power management -+# -+# CONFIG_S3C2410_PM_DEBUG is not set -+# CONFIG_S3C2410_PM_CHECK is not set -+CONFIG_S3C_LOWLEVEL_UART_PORT=3 -+CONFIG_S3C_GPIO_SPACE=0 -+CONFIG_S3C_GPIO_TRACK=y -+CONFIG_S3C_GPIO_PULL_UPDOWN=y -+CONFIG_S3C_GPIO_CFG_S3C24XX=y -+CONFIG_S3C_GPIO_CFG_S3C64XX=y -+CONFIG_S3C_DEV_HSMMC=y -+CONFIG_S3C_DEV_HSMMC1=y -+CONFIG_S3C_DEV_I2C1=y -+CONFIG_S3C_DEV_FB=y -+CONFIG_CPU_S3C6410=y -+CONFIG_S3C6410_SETUP_SDHCI=y -+# CONFIG_MACH_SMDK6410 is not set -+CONFIG_MACH_OPENMOKO_GTA03=y -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_V6=y -+CONFIG_CPU_32v6K=y -+CONFIG_CPU_32v6=y -+CONFIG_CPU_ABRT_EV6=y -+CONFIG_CPU_PABRT_NOIFAR=y -+CONFIG_CPU_CACHE_V6=y -+CONFIG_CPU_CACHE_VIPT=y -+CONFIG_CPU_COPY_V6=y -+CONFIG_CPU_TLB_V6=y -+CONFIG_CPU_HAS_ASID=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_BPREDICT_DISABLE is not set -+# CONFIG_OUTER_CACHE is not set -+CONFIG_ARM_VIC=y -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 -+# CONFIG_PREEMPT is not set -+CONFIG_HZ=100 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+CONFIG_ARCH_FLATMEM_HAS_HOLES=y -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0 -+CONFIG_ZBOOT_ROM_BSS=0 -+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# CPU Power Management -+# -+CONFIG_CPU_IDLE=y -+CONFIG_CPU_IDLE_GOV_LADDER=y -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+# CONFIG_FPE_NWFPE is not set -+# CONFIG_FPE_FASTFPE is not set -+CONFIG_VFP=y -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_APM_EMULATION=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+# CONFIG_XFRM_USER is not set -+# CONFIG_XFRM_SUB_POLICY is not set -+CONFIG_XFRM_MIGRATE=y -+# CONFIG_XFRM_STATISTICS is not set -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_MULTIPLE_TABLES=y -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+CONFIG_TCP_MD5SIG=y -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+# CONFIG_INET6_AH is not set -+# CONFIG_INET6_ESP is not set -+# CONFIG_INET6_IPCOMP is not set -+# CONFIG_IPV6_MIP6 is not set -+# CONFIG_INET6_XFRM_TUNNEL is not set -+# CONFIG_INET6_TUNNEL is not set -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+# CONFIG_IPV6_TUNNEL is not set -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_NETFILTER_ADVANCED=y -+ -+# -+# Core Netfilter Configuration -+# -+# CONFIG_NETFILTER_NETLINK_QUEUE is not set -+# CONFIG_NETFILTER_NETLINK_LOG is not set -+# CONFIG_NF_CONNTRACK is not set -+CONFIG_NETFILTER_XTABLES=m -+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -+# CONFIG_NETFILTER_XT_TARGET_MARK is not set -+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -+# CONFIG_NETFILTER_XT_MATCH_ESP is not set -+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -+# CONFIG_NETFILTER_XT_MATCH_MAC is not set -+# CONFIG_NETFILTER_XT_MATCH_MARK is not set -+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -+# CONFIG_NETFILTER_XT_MATCH_REALM is not set -+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -+# CONFIG_NETFILTER_XT_MATCH_STRING is not set -+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -+# CONFIG_NETFILTER_XT_MATCH_TIME is not set -+# CONFIG_NETFILTER_XT_MATCH_U32 is not set -+# CONFIG_IP_VS is not set -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_NF_DEFRAG_IPV4 is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+ -+# -+# IPv6: Netfilter Configuration -+# -+# CONFIG_IP6_NF_QUEUE is not set -+CONFIG_IP6_NF_IPTABLES=m -+# CONFIG_IP6_NF_MATCH_AH is not set -+# CONFIG_IP6_NF_MATCH_EUI64 is not set -+# CONFIG_IP6_NF_MATCH_FRAG is not set -+# CONFIG_IP6_NF_MATCH_OPTS is not set -+# CONFIG_IP6_NF_MATCH_HL is not set -+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -+# CONFIG_IP6_NF_MATCH_MH is not set -+# CONFIG_IP6_NF_MATCH_RT is not set -+# CONFIG_IP6_NF_TARGET_LOG is not set -+# CONFIG_IP6_NF_FILTER is not set -+# CONFIG_IP6_NF_MANGLE is not set -+# CONFIG_IP6_NF_RAW is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_NET_DSA is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+# CONFIG_PHONET is not set -+CONFIG_FIB_RULES=y -+CONFIG_WIRELESS=y -+CONFIG_CFG80211=y -+CONFIG_NL80211=y -+CONFIG_WIRELESS_OLD_REGULATORY=y -+CONFIG_WIRELESS_EXT=y -+CONFIG_WIRELESS_EXT_SYSFS=y -+CONFIG_MAC80211=y -+ -+# -+# Rate control algorithm selection -+# -+CONFIG_MAC80211_RC_PID=y -+# CONFIG_MAC80211_RC_MINSTREL is not set -+CONFIG_MAC80211_RC_DEFAULT_PID=y -+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -+CONFIG_MAC80211_RC_DEFAULT="pid" -+# CONFIG_MAC80211_MESH is not set -+CONFIG_MAC80211_LEDS=y -+# CONFIG_MAC80211_DEBUG_MENU is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+CONFIG_FIRMWARE_IN_KERNEL=y -+CONFIG_EXTRA_FIRMWARE="" -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AFS_PARTS is not set -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+# CONFIG_MTD_CFI is not set -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+CONFIG_MTD_ONENAND=y -+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set -+CONFIG_MTD_ONENAND_GENERIC=y -+# CONFIG_MTD_ONENAND_OTP is not set -+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set -+# CONFIG_MTD_ONENAND_SIM is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=8192 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_LOW_MEMORY_KILLER=y -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+CONFIG_TUN=y -+# CONFIG_VETH is not set -+# CONFIG_NET_ETHERNET is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=y -+# CONFIG_PPP_MULTILINK is not set -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=y -+CONFIG_PPP_SYNC_TTY=y -+CONFIG_PPP_DEFLATE=y -+CONFIG_PPP_BSDCOMP=y -+CONFIG_PPP_MPPE=y -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=y -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+CONFIG_KEYBOARD_ATKBD=y -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_KEYBOARD_GPIO is not set -+CONFIG_KEYBOARD_NEO1973=y -+CONFIG_INPUT_MOUSE=y -+CONFIG_MOUSE_PS2=y -+CONFIG_MOUSE_PS2_ALPS=y -+CONFIG_MOUSE_PS2_LOGIPS2PP=y -+CONFIG_MOUSE_PS2_SYNAPTICS=y -+CONFIG_MOUSE_PS2_LIFEBOOK=y -+CONFIG_MOUSE_PS2_TRACKPOINT=y -+# CONFIG_MOUSE_PS2_ELANTECH is not set -+# CONFIG_MOUSE_PS2_TOUCHKIT is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_FILTER=y -+CONFIG_TOUCHSCREEN_FILTER_GROUP=y -+CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y -+CONFIG_TOUCHSCREEN_FILTER_MEAN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+CONFIG_INPUT_MISC=y -+CONFIG_TOUCHSCREEN_PCAP7200=y -+# CONFIG_INPUT_ATI_REMOTE is not set -+# CONFIG_INPUT_ATI_REMOTE2 is not set -+# CONFIG_INPUT_KEYSPAN_REMOTE is not set -+# CONFIG_INPUT_POWERMATE is not set -+# CONFIG_INPUT_YEALINK is not set -+# CONFIG_INPUT_CM109 is not set -+# CONFIG_INPUT_UINPUT is not set -+CONFIG_INPUT_LIS302DL=y -+CONFIG_INPUT_PCF50633_PMU=y -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+CONFIG_SERIO_LIBPS2=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_NR_TTY_DEVICES=6 -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+# CONFIG_SERIAL_8250_CONSOLE is not set -+CONFIG_SERIAL_8250_NR_UARTS=4 -+CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -+# CONFIG_SERIAL_8250_EXTENDED is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_SAMSUNG=y -+CONFIG_SERIAL_SAMSUNG_UARTS=4 -+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set -+CONFIG_SERIAL_SAMSUNG_CONSOLE=y -+CONFIG_SERIAL_S3C6400=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+# CONFIG_IPMI_HANDLER is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_HELPER_AUTO=y -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF50606 is not set -+# CONFIG_SENSORS_PCF50633 is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_SENSORS_TSL256X is not set -+CONFIG_PCA9632=y -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_BITBANG=y -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+CONFIG_POWER_SUPPLY=y -+# CONFIG_POWER_SUPPLY_DEBUG is not set -+# CONFIG_PDA_POWER is not set -+# CONFIG_APM_POWER is not set -+# CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_BQ27x00 is not set -+# CONFIG_BATTERY_BQ27000_HDQ is not set -+CONFIG_CHARGER_PCF50633=y -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_AD7414 is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADCXX is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ADT7470 is not set -+# CONFIG_SENSORS_ADT7473 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_F71882FG is not set -+# CONFIG_SENSORS_F75375S is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM70 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_LM93 is not set -+# CONFIG_SENSORS_MAX1111 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_DME1737 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_ADS7828 is not set -+# CONFIG_SENSORS_THMC50 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83L786NG is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+# CONFIG_WATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_ASIC3 is not set -+# CONFIG_HTC_EGPIO is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+# CONFIG_MFD_T7L66XB is not set -+# CONFIG_MFD_TC6387XB is not set -+# CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set -+CONFIG_MFD_PCF50633=y -+CONFIG_PCF50633_ADC=y -+CONFIG_PCF50633_GPIO=y -+# CONFIG_MFD_PCF50606 is not set -+# CONFIG_MFD_GLAMO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+# CONFIG_FB_BOOT_VESA_SUPPORT is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+CONFIG_FB_MODE_HELPERS=y -+CONFIG_FB_TILEBLITTING=y -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_S3C=y -+# CONFIG_FB_S3C_DEBUG_REGWRITE is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_FB_METRONOME is not set -+# CONFIG_FB_MB862XX is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+# CONFIG_LCD_LTV350QV is not set -+# CONFIG_LCD_ILI9320 is not set -+# CONFIG_LCD_TDO24M is not set -+# CONFIG_LCD_VGG2432A4 is not set -+CONFIG_LCD_PLATFORM=y -+CONFIG_BACKLIGHT_CLASS_DEVICE=y -+CONFIG_BACKLIGHT_CORGI=y -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_DISPLAY_JBT6K74 is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -+CONFIG_FONTS=y -+CONFIG_FONT_8x8=y -+CONFIG_FONT_8x16=y -+# CONFIG_FONT_6x11 is not set -+# CONFIG_FONT_7x14 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+# CONFIG_FONT_MINI_4x6 is not set -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_10x18 is not set -+CONFIG_LOGO=y -+CONFIG_LOGO_LINUX_MONO=y -+CONFIG_LOGO_LINUX_VGA16=y -+# CONFIG_LOGO_LINUX_CLUT224 is not set -+CONFIG_SOUND=y -+# CONFIG_SOUND_OSS_CORE is not set -+CONFIG_SND=y -+CONFIG_SND_TIMER=y -+CONFIG_SND_PCM=y -+# CONFIG_SND_SEQUENCER is not set -+# CONFIG_SND_MIXER_OSS is not set -+# CONFIG_SND_PCM_OSS is not set -+# CONFIG_SND_DYNAMIC_MINORS is not set -+CONFIG_SND_SUPPORT_OLD_API=y -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+CONFIG_SND_DRIVERS=y -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+CONFIG_SND_ARM=y -+CONFIG_SND_SPI=y -+CONFIG_SND_SOC=y -+# CONFIG_SND_SOC_ALL_CODECS is not set -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set -+# CONFIG_HID_PID is not set -+ -+# -+# Special HID drivers -+# -+# CONFIG_HID_COMPAT is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+# CONFIG_USB is not set -+ -+# -+# Enable Host or Gadget support to see Inventra options -+# -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+# CONFIG_USB_GADGET is not set -+# CONFIG_AR6000_WLAN is not set -+CONFIG_MMC=y -+CONFIG_MMC_DEBUG=y -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD/SDIO Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+CONFIG_SDIO_UART=y -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD/SDIO Host Controller Drivers -+# -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_S3C=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_NEW_LEDS=y -+# CONFIG_LEDS_CLASS is not set -+ -+# -+# LED drivers -+# -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+# CONFIG_LEDS_TRIGGER_TIMER is not set -+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+CONFIG_RTC_DRV_PCF50633=y -+# CONFIG_RTC_DRV_PCF50606 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_DS3234 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1286 is not set -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T35 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_BQ4802 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+# CONFIG_DMADEVICES is not set -+ -+# -+# Android -+# -+CONFIG_ANDROID_BINDER_IPC=y -+# CONFIG_ANDROID_POWER is not set -+CONFIG_ANDROID_LOGGER=y -+# CONFIG_ANDROID_RAM_CONSOLE is not set -+# CONFIG_ANDROID_TIMED_GPIO is not set -+# CONFIG_ANDROID_PARANOID_NETWORK is not set -+CONFIG_REGULATOR=y -+# CONFIG_REGULATOR_DEBUG is not set -+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -+# CONFIG_REGULATOR_BQ24022 is not set -+CONFIG_REGULATOR_PCF50633=y -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+CONFIG_EXT3_FS_POSIX_ACL=y -+CONFIG_EXT3_FS_SECURITY=y -+# CONFIG_EXT4_FS is not set -+CONFIG_JBD=y -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+CONFIG_FILE_LOCKING=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+# CONFIG_OCFS2_FS is not set -+CONFIG_DNOTIFY=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+CONFIG_GENERIC_ACL=y -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+# CONFIG_MSDOS_FS is not set -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+CONFIG_JFFS2_SUMMARY=y -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+# CONFIG_NFS_FS is not set -+# CONFIG_NFSD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_KARMA_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+# CONFIG_SYSV68_PARTITION is not set -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_PRINTK_TIME=y -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+CONFIG_DEBUG_RT_MUTEXES=y -+CONFIG_DEBUG_PI_LIST=y -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+CONFIG_DEBUG_MUTEXES=y -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+CONFIG_DEBUG_MEMORY_INIT=y -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_RCU_CPU_STALL_DETECTOR is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_LATENCYTOP is not set -+CONFIG_SYSCTL_SYSCALL_CHECK=y -+CONFIG_HAVE_FUNCTION_TRACER=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set -+# CONFIG_SCHED_TRACER is not set -+# CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_STACK_TRACER is not set -+CONFIG_DYNAMIC_PRINTK_DEBUG=y -+# CONFIG_SAMPLES is not set -+CONFIG_HAVE_ARCH_KGDB=y -+# CONFIG_KGDB is not set -+CONFIG_DEBUG_USER=y -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_STACK_USAGE is not set -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+CONFIG_DEBUG_S3C_PORT=y -+CONFIG_DEBUG_S3C_UART=3 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITYFS is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+# CONFIG_CRYPTO_FIPS is not set -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_RNG=y -+CONFIG_CRYPTO_MANAGER=y -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+# CONFIG_CRYPTO_AUTHENC is not set -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+# CONFIG_CRYPTO_CBC is not set -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=y -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+# CONFIG_CRYPTO_HMAC is not set -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+CONFIG_CRYPTO_AES=y -+# CONFIG_CRYPTO_ANUBIS is not set -+CONFIG_CRYPTO_ARC4=y -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+# CONFIG_CRYPTO_DES is not set -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+# CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_LZO is not set -+ -+# -+# Random Number Generation -+# -+# CONFIG_CRYPTO_ANSI_CPRNG is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+CONFIG_CRC_CCITT=y -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_T10DIF is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.28/arch/arm/configs/s3c6400_defconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/configs/s3c6400_defconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,845 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.28-rc3 -+# Mon Nov 3 10:10:30 2008 -+# -+CONFIG_ARM=y -+CONFIG_SYS_SUPPORTS_APM_EMULATION=y -+CONFIG_GENERIC_GPIO=y -+# CONFIG_GENERIC_TIME is not set -+# CONFIG_GENERIC_CLOCKEVENTS is not set -+CONFIG_MMU=y -+CONFIG_NO_IOPORT=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_HAVE_LATENCYTOP_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -+CONFIG_VECTORS_BASE=0xffff0000 -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+CONFIG_LOCALVERSION_AUTO=y -+CONFIG_SWAP=y -+# CONFIG_SYSVIPC is not set -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=17 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+CONFIG_NAMESPACES=y -+# CONFIG_UTS_NS is not set -+# CONFIG_USER_NS is not set -+# CONFIG_PID_NS is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+# CONFIG_EMBEDDED is not set -+CONFIG_UID16=y -+CONFIG_SYSCTL_SYSCALL=y -+CONFIG_KALLSYMS=y -+CONFIG_KALLSYMS_ALL=y -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+CONFIG_COMPAT_BRK=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_AIO=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+# CONFIG_PROFILING is not set -+# CONFIG_MARKERS is not set -+CONFIG_HAVE_OPROFILE=y -+# CONFIG_KPROBES is not set -+CONFIG_HAVE_KPROBES=y -+CONFIG_HAVE_KRETPROBES=y -+CONFIG_HAVE_CLK=y -+CONFIG_HAVE_GENERIC_DMA_COHERENT=y -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+CONFIG_LBD=y -+# CONFIG_BLK_DEV_IO_TRACE is not set -+CONFIG_LSF=y -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+# CONFIG_FREEZER is not set -+ -+# -+# System Type -+# -+# CONFIG_ARCH_AAEC2000 is not set -+# CONFIG_ARCH_INTEGRATOR is not set -+# CONFIG_ARCH_REALVIEW is not set -+# CONFIG_ARCH_VERSATILE is not set -+# CONFIG_ARCH_AT91 is not set -+# CONFIG_ARCH_CLPS7500 is not set -+# CONFIG_ARCH_CLPS711X is not set -+# CONFIG_ARCH_EBSA110 is not set -+# CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_FOOTBRIDGE is not set -+# CONFIG_ARCH_NETX is not set -+# CONFIG_ARCH_H720X is not set -+# CONFIG_ARCH_IMX is not set -+# CONFIG_ARCH_IOP13XX is not set -+# CONFIG_ARCH_IOP32X is not set -+# CONFIG_ARCH_IOP33X is not set -+# CONFIG_ARCH_IXP23XX is not set -+# CONFIG_ARCH_IXP2000 is not set -+# CONFIG_ARCH_IXP4XX is not set -+# CONFIG_ARCH_L7200 is not set -+# CONFIG_ARCH_KIRKWOOD is not set -+# CONFIG_ARCH_KS8695 is not set -+# CONFIG_ARCH_NS9XXX is not set -+# CONFIG_ARCH_LOKI is not set -+# CONFIG_ARCH_MV78XX0 is not set -+# CONFIG_ARCH_MXC is not set -+# CONFIG_ARCH_ORION5X is not set -+# CONFIG_ARCH_PNX4008 is not set -+# CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_RPC is not set -+# CONFIG_ARCH_SA1100 is not set -+# CONFIG_ARCH_S3C2410 is not set -+CONFIG_ARCH_S3C64XX=y -+# CONFIG_ARCH_SHARK is not set -+# CONFIG_ARCH_LH7A40X is not set -+# CONFIG_ARCH_DAVINCI is not set -+# CONFIG_ARCH_OMAP is not set -+# CONFIG_ARCH_MSM is not set -+CONFIG_PLAT_S3C64XX=y -+CONFIG_CPU_S3C6400_INIT=y -+CONFIG_CPU_S3C6400_CLOCK=y -+CONFIG_S3C64XX_SETUP_I2C0=y -+CONFIG_S3C64XX_SETUP_I2C1=y -+CONFIG_PLAT_S3C=y -+ -+# -+# Boot options -+# -+CONFIG_S3C_BOOT_ERROR_RESET=y -+ -+# -+# Power management -+# -+CONFIG_S3C_LOWLEVEL_UART_PORT=0 -+CONFIG_S3C_GPIO_SPACE=0 -+CONFIG_S3C_GPIO_TRACK=y -+CONFIG_S3C_GPIO_PULL_UPDOWN=y -+CONFIG_S3C_GPIO_CFG_S3C24XX=y -+CONFIG_S3C_GPIO_CFG_S3C64XX=y -+CONFIG_S3C_DEV_HSMMC=y -+CONFIG_S3C_DEV_HSMMC1=y -+CONFIG_S3C_DEV_I2C1=y -+CONFIG_CPU_S3C6410=y -+CONFIG_S3C6410_SETUP_SDHCI=y -+CONFIG_MACH_SMDK6410=y -+CONFIG_SMDK6410_SD_CH0=y -+# CONFIG_SMDK6410_SD_CH1 is not set -+ -+# -+# Processor Type -+# -+CONFIG_CPU_32=y -+CONFIG_CPU_V6=y -+CONFIG_CPU_32v6K=y -+CONFIG_CPU_32v6=y -+CONFIG_CPU_ABRT_EV6=y -+CONFIG_CPU_PABRT_NOIFAR=y -+CONFIG_CPU_CACHE_V6=y -+CONFIG_CPU_CACHE_VIPT=y -+CONFIG_CPU_COPY_V6=y -+CONFIG_CPU_TLB_V6=y -+CONFIG_CPU_HAS_ASID=y -+CONFIG_CPU_CP15=y -+CONFIG_CPU_CP15_MMU=y -+ -+# -+# Processor Features -+# -+CONFIG_ARM_THUMB=y -+# CONFIG_CPU_ICACHE_DISABLE is not set -+# CONFIG_CPU_DCACHE_DISABLE is not set -+# CONFIG_CPU_BPREDICT_DISABLE is not set -+# CONFIG_OUTER_CACHE is not set -+CONFIG_ARM_VIC=y -+ -+# -+# Bus support -+# -+# CONFIG_PCI_SYSCALL is not set -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Kernel Features -+# -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 -+# CONFIG_PREEMPT is not set -+CONFIG_HZ=100 -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+CONFIG_ARCH_FLATMEM_HAS_HOLES=y -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y -+CONFIG_ALIGNMENT_TRAP=y -+ -+# -+# Boot options -+# -+CONFIG_ZBOOT_ROM_TEXT=0 -+CONFIG_ZBOOT_ROM_BSS=0 -+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M" -+# CONFIG_XIP_KERNEL is not set -+# CONFIG_KEXEC is not set -+ -+# -+# CPU Power Management -+# -+# CONFIG_CPU_IDLE is not set -+ -+# -+# Floating point emulation -+# -+ -+# -+# At least one emulation must be selected -+# -+# CONFIG_FPE_NWFPE is not set -+# CONFIG_FPE_FASTFPE is not set -+CONFIG_VFP=y -+ -+# -+# Userspace binary formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y -+# CONFIG_BINFMT_AOUT is not set -+# CONFIG_BINFMT_MISC is not set -+ -+# -+# Power management options -+# -+# CONFIG_PM is not set -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+# CONFIG_NET is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+CONFIG_FW_LOADER=y -+CONFIG_FIRMWARE_IN_KERNEL=y -+CONFIG_EXTRA_FIRMWARE="" -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_MTD is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+CONFIG_HAVE_IDE=y -+# CONFIG_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+# CONFIG_INPUT_EVDEV is not set -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+CONFIG_KEYBOARD_ATKBD=y -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+# CONFIG_KEYBOARD_GPIO is not set -+CONFIG_INPUT_MOUSE=y -+CONFIG_MOUSE_PS2=y -+CONFIG_MOUSE_PS2_ALPS=y -+CONFIG_MOUSE_PS2_LOGIPS2PP=y -+CONFIG_MOUSE_PS2_SYNAPTICS=y -+CONFIG_MOUSE_PS2_LIFEBOOK=y -+CONFIG_MOUSE_PS2_TRACKPOINT=y -+# CONFIG_MOUSE_PS2_ELANTECH is not set -+# CONFIG_MOUSE_PS2_TOUCHKIT is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+# CONFIG_MOUSE_GPIO is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+CONFIG_SERIO=y -+CONFIG_SERIO_SERPORT=y -+CONFIG_SERIO_LIBPS2=y -+# CONFIG_SERIO_RAW is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+# CONFIG_SERIAL_8250_CONSOLE is not set -+CONFIG_SERIAL_8250_NR_UARTS=4 -+CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -+# CONFIG_SERIAL_8250_EXTENDED is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_SAMSUNG=y -+CONFIG_SERIAL_SAMSUNG_UARTS=4 -+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set -+CONFIG_SERIAL_SAMSUNG_CONSOLE=y -+CONFIG_SERIAL_S3C6400=y -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+# CONFIG_IPMI_HANDLER is not set -+CONFIG_HW_RANDOM=y -+# CONFIG_NVRAM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_HELPER_AUTO=y -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+# CONFIG_I2C_GPIO is not set -+# CONFIG_I2C_OCORES is not set -+CONFIG_I2C_S3C2410=y -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+CONFIG_AT24=y -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+# CONFIG_SPI is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+# CONFIG_GPIO_SYSFS is not set -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+CONFIG_HWMON=y -+# CONFIG_HWMON_VID is not set -+# CONFIG_SENSORS_AD7414 is not set -+# CONFIG_SENSORS_AD7418 is not set -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1029 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ADM9240 is not set -+# CONFIG_SENSORS_ADT7470 is not set -+# CONFIG_SENSORS_ADT7473 is not set -+# CONFIG_SENSORS_ATXP1 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_F71805F is not set -+# CONFIG_SENSORS_F71882FG is not set -+# CONFIG_SENSORS_F75375S is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_LM93 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_MAX6650 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_PC87427 is not set -+# CONFIG_SENSORS_DME1737 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_SMSC47M192 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_ADS7828 is not set -+# CONFIG_SENSORS_THMC50 is not set -+# CONFIG_SENSORS_VT1211 is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83791D is not set -+# CONFIG_SENSORS_W83792D is not set -+# CONFIG_SENSORS_W83793 is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83L786NG is not set -+# CONFIG_SENSORS_W83627HF is not set -+# CONFIG_SENSORS_W83627EHF is not set -+# CONFIG_HWMON_DEBUG_CHIP is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+# CONFIG_WATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_ASIC3 is not set -+# CONFIG_HTC_EGPIO is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+# CONFIG_MFD_T7L66XB is not set -+# CONFIG_MFD_TC6387XB is not set -+# CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+# CONFIG_FB is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+# CONFIG_VGA_CONSOLE is not set -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_SOUND is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+CONFIG_HID_DEBUG=y -+# CONFIG_HIDRAW is not set -+# CONFIG_HID_PID is not set -+ -+# -+# Special HID drivers -+# -+# CONFIG_HID_COMPAT is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+# CONFIG_USB is not set -+ -+# -+# Enable Host or Gadget support to see Inventra options -+# -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+# CONFIG_USB_GADGET is not set -+CONFIG_MMC=y -+CONFIG_MMC_DEBUG=y -+CONFIG_MMC_UNSAFE_RESUME=y -+ -+# -+# MMC/SD/SDIO Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+CONFIG_SDIO_UART=y -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD/SDIO Host Controller Drivers -+# -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_S3C=y -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set -+# CONFIG_NEW_LEDS is not set -+CONFIG_RTC_LIB=y -+# CONFIG_RTC_CLASS is not set -+# CONFIG_DMADEVICES is not set -+ -+# -+# Voltage and Current regulators -+# -+# CONFIG_REGULATOR is not set -+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -+# CONFIG_REGULATOR_BQ24022 is not set -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+CONFIG_EXT3_FS_XATTR=y -+CONFIG_EXT3_FS_POSIX_ACL=y -+CONFIG_EXT3_FS_SECURITY=y -+# CONFIG_EXT4_FS is not set -+CONFIG_JBD=y -+CONFIG_FS_MBCACHE=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+CONFIG_FS_POSIX_ACL=y -+CONFIG_FILE_LOCKING=y -+# CONFIG_XFS_FS is not set -+# CONFIG_GFS2_FS is not set -+CONFIG_DNOTIFY=y -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+CONFIG_GENERIC_ACL=y -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+# CONFIG_MSDOS_FS is not set -+# CONFIG_VFAT_FS is not set -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+# CONFIG_HUGETLB_PAGE is not set -+# CONFIG_CONFIGFS_FS is not set -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+CONFIG_ROMFS_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_NLS is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+CONFIG_DEBUG_RT_MUTEXES=y -+CONFIG_DEBUG_PI_LIST=y -+# CONFIG_RT_MUTEX_TESTER is not set -+CONFIG_DEBUG_SPINLOCK=y -+CONFIG_DEBUG_MUTEXES=y -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+CONFIG_DEBUG_SPINLOCK_SLEEP=y -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+CONFIG_DEBUG_INFO=y -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+CONFIG_DEBUG_MEMORY_INIT=y -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_RCU_CPU_STALL_DETECTOR is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_LATENCYTOP is not set -+CONFIG_SYSCTL_SYSCALL_CHECK=y -+CONFIG_HAVE_FUNCTION_TRACER=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set -+# CONFIG_SCHED_TRACER is not set -+# CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_STACK_TRACER is not set -+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -+# CONFIG_SAMPLES is not set -+CONFIG_HAVE_ARCH_KGDB=y -+# CONFIG_KGDB is not set -+CONFIG_DEBUG_USER=y -+CONFIG_DEBUG_ERRORS=y -+# CONFIG_DEBUG_STACK_USAGE is not set -+CONFIG_DEBUG_LL=y -+# CONFIG_DEBUG_ICEDCC is not set -+CONFIG_DEBUG_S3C_PORT=y -+CONFIG_DEBUG_S3C_UART=0 -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITYFS is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_CRC_CCITT is not set -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_T10DIF is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_DMA=y -Index: linux-2.6.28/arch/arm/Kconfig -=================================================================== ---- linux-2.6.28.orig/arch/arm/Kconfig 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -498,6 +498,13 @@ config ARCH_S3C2410 - BAST (), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derivatives). - -+config ARCH_S3C64XX -+ bool "Samsung S3C64XX" -+ select GENERIC_GPIO -+ select HAVE_CLK -+ help -+ Samsung S3C64XX series based systems -+ - config ARCH_SHARK - bool "Shark" - select ISA -@@ -590,6 +597,7 @@ source "arch/arm/mach-orion5x/Kconfig" - source "arch/arm/mach-kirkwood/Kconfig" - - source "arch/arm/plat-s3c24xx/Kconfig" -+source "arch/arm/plat-s3c64xx/Kconfig" - source "arch/arm/plat-s3c/Kconfig" - - if ARCH_S3C2410 -@@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2442/Kconfig" - source "arch/arm/mach-s3c2443/Kconfig" - endif - -+if ARCH_S3C64XX -+source "arch/arm/mach-s3c6400/Kconfig" -+source "arch/arm/mach-s3c6410/Kconfig" -+endif -+ - source "arch/arm/mach-lh7a40x/Kconfig" - - source "arch/arm/mach-imx/Kconfig" -@@ -1256,6 +1269,8 @@ source "drivers/usb/Kconfig" - - source "drivers/uwb/Kconfig" - -+source "drivers/ar6000/Kconfig" -+ - source "drivers/mmc/Kconfig" - - source "drivers/memstick/Kconfig" -@@ -1268,6 +1283,8 @@ source "drivers/rtc/Kconfig" - - source "drivers/dma/Kconfig" - -+source "drivers/android/Kconfig" -+ - source "drivers/dca/Kconfig" - - source "drivers/auxdisplay/Kconfig" -Index: linux-2.6.28/arch/arm/kernel/vmlinux.lds.S -=================================================================== ---- linux-2.6.28.orig/arch/arm/kernel/vmlinux.lds.S 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/kernel/vmlinux.lds.S 2009-01-02 00:01:56.000000000 +0100 -@@ -106,6 +106,8 @@ SECTIONS - *(.got) /* Global offset table */ - } - -+ NOTES -+ - RODATA - - _etext = .; /* End of text and rodata section */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/clock.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/clock.c 2008-12-25 00:26:37.000000000 +0100 -+++ /dev/null 1970-01-01 00:00:00.000000000 +0000 -@@ -1,276 +0,0 @@ --/* linux/arch/arm/mach-s3c2410/clock.c -- * -- * Copyright (c) 2006 Simtec Electronics -- * Ben Dooks -- * -- * S3C2410,S3C2440,S3C2442 Clock control support -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- * -- * You should have received a copy of the GNU General Public License -- * along with this program; if not, write to the Free Software -- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA --*/ -- --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include -- --#include -- --#include -- --#include --#include --#include -- --#include --#include --#include -- --int s3c2410_clkcon_enable(struct clk *clk, int enable) --{ -- unsigned int clocks = clk->ctrlbit; -- unsigned long clkcon; -- -- clkcon = __raw_readl(S3C2410_CLKCON); -- -- if (enable) -- clkcon |= clocks; -- else -- clkcon &= ~clocks; -- -- /* ensure none of the special function bits set */ -- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); -- -- __raw_writel(clkcon, S3C2410_CLKCON); -- -- return 0; --} -- --static int s3c2410_upll_enable(struct clk *clk, int enable) --{ -- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); -- unsigned long orig = clkslow; -- -- if (enable) -- clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; -- else -- clkslow |= S3C2410_CLKSLOW_UCLK_OFF; -- -- __raw_writel(clkslow, S3C2410_CLKSLOW); -- -- /* if we started the UPLL, then allow to settle */ -- -- if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) -- udelay(200); -- -- return 0; --} -- --/* standard clock definitions */ -- --static struct clk init_clocks_disable[] = { -- { -- .name = "nand", -- .id = -1, -- .parent = &clk_h, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_NAND, -- }, { -- .name = "sdi", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_SDI, -- }, { -- .name = "adc", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_ADC, -- }, { -- .name = "i2c", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_IIC, -- }, { -- .name = "iis", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_IIS, -- }, { -- .name = "spi", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_SPI, -- } --}; -- --static struct clk init_clocks[] = { -- { -- .name = "lcd", -- .id = -1, -- .parent = &clk_h, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_LCDC, -- }, { -- .name = "gpio", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_GPIO, -- }, { -- .name = "usb-host", -- .id = -1, -- .parent = &clk_h, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_USBH, -- }, { -- .name = "usb-device", -- .id = -1, -- .parent = &clk_h, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_USBD, -- }, { -- .name = "timers", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_PWMT, -- }, { -- .name = "uart", -- .id = 0, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_UART0, -- }, { -- .name = "uart", -- .id = 1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_UART1, -- }, { -- .name = "uart", -- .id = 2, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_UART2, -- }, { -- .name = "rtc", -- .id = -1, -- .parent = &clk_p, -- .enable = s3c2410_clkcon_enable, -- .ctrlbit = S3C2410_CLKCON_RTC, -- }, { -- .name = "watchdog", -- .id = -1, -- .parent = &clk_p, -- .ctrlbit = 0, -- }, { -- .name = "usb-bus-host", -- .id = -1, -- .parent = &clk_usb_bus, -- }, { -- .name = "usb-bus-gadget", -- .id = -1, -- .parent = &clk_usb_bus, -- }, --}; -- --/* s3c2410_baseclk_add() -- * -- * Add all the clocks used by the s3c2410 or compatible CPUs -- * such as the S3C2440 and S3C2442. -- * -- * We cannot use a system device as we are needed before any -- * of the init-calls that initialise the devices are actually -- * done. --*/ -- --int __init s3c2410_baseclk_add(void) --{ -- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); -- unsigned long clkcon = __raw_readl(S3C2410_CLKCON); -- struct clk *clkp; -- struct clk *xtal; -- int ret; -- int ptr; -- -- clk_upll.enable = s3c2410_upll_enable; -- -- if (s3c24xx_register_clock(&clk_usb_bus) < 0) -- printk(KERN_ERR "failed to register usb bus clock\n"); -- -- /* register clocks from clock array */ -- -- clkp = init_clocks; -- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { -- /* ensure that we note the clock state */ -- -- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; -- -- ret = s3c24xx_register_clock(clkp); -- if (ret < 0) { -- printk(KERN_ERR "Failed to register clock %s (%d)\n", -- clkp->name, ret); -- } -- } -- -- /* We must be careful disabling the clocks we are not intending to -- * be using at boot time, as subsystems such as the LCD which do -- * their own DMA requests to the bus can cause the system to lockup -- * if they where in the middle of requesting bus access. -- * -- * Disabling the LCD clock if the LCD is active is very dangerous, -- * and therefore the bootloader should be careful to not enable -- * the LCD clock if it is not needed. -- */ -- -- /* install (and disable) the clocks we do not need immediately */ -- -- clkp = init_clocks_disable; -- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { -- -- ret = s3c24xx_register_clock(clkp); -- if (ret < 0) { -- printk(KERN_ERR "Failed to register clock %s (%d)\n", -- clkp->name, ret); -- } -- -- s3c2410_clkcon_enable(clkp, 0); -- } -- -- /* show the clock-slow value */ -- -- xtal = clk_get(NULL, "xtal"); -- -- printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", -- print_mhz(clk_get_rate(xtal) / -- ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), -- (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", -- (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", -- (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); -- -- return 0; --} -Index: linux-2.6.28/arch/arm/mach-s3c2410/dma.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/dma.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/dma.c 2009-01-02 00:01:56.000000000 +0100 -@@ -25,12 +25,12 @@ - - #include - #include --#include -+#include - #include - #include - #include - #include --#include -+#include - - static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { - [DMACH_XD0] = { -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/fiq_ipc_gta02.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/fiq_ipc_gta02.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,60 @@ -+#ifndef _LINUX_FIQ_IPC_H -+#define _LINUX_FIQ_IPC_H -+ -+/* -+ * this defines the struct which is used to communicate between the FIQ -+ * world and the normal linux kernel world. One of these structs is -+ * statically defined for you in the monolithic kernel so the FIQ ISR code -+ * can safely touch it any any time. -+ * -+ * You also want to include this file in your kernel module that wants to -+ * communicate with your FIQ code. Add any kinds of vars that are used by -+ * the FIQ ISR and the module in here. -+ * -+ * To get you started there is just an int that is incremented every FIQ -+ * you can remove this when you are ready to customize, but it is useful -+ * for testing -+ */ -+ -+#include -+#include -+ -+extern u8 fiq_ready; -+ -+enum hdq_bitbang_states { -+ HDQB_IDLE = 0, -+ HDQB_TX_BREAK, -+ HDQB_TX_BREAK_RECOVERY, -+ HDQB_ADS_CALC, -+ HDQB_ADS_LOW, -+ HDQB_ADS_HIGH, -+ HDQB_WAIT_RX, -+ HDQB_DATA_RX_LOW, -+ HDQB_DATA_RX_HIGH, -+ HDQB_WAIT_TX, -+}; -+ -+struct fiq_ipc { -+ /* vibrator */ -+ unsigned long vib_gpio_pin; /* which pin to meddle with */ -+ u8 vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */ -+ u8 vib_pwm_latched; -+ -+ /* hdq */ -+ u8 hdq_probed; /* nonzero after HDQ driver probed */ -+ struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */ -+ unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */ -+ u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */ -+ u8 hdq_tx_data; /* data to tx for write action */ -+ u8 hdq_rx_data; /* data received in read action */ -+ u8 hdq_request_ctr; /* incremented by "user" to request a transfer */ -+ u8 hdq_transaction_ctr; /* incremented after each transfer */ -+ u8 hdq_error; /* 0 = no error */ -+}; -+ -+/* actual definition lives in arch/arm/mach-s3c2440/fiq_c_isr.c */ -+extern struct fiq_ipc fiq_ipc; -+extern unsigned long _fiq_count_fiqs; -+extern void fiq_kick(void); /* provoke a FIQ "immediately" */ -+ -+#endif /* _LINUX_FIQ_IPC_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-core.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-core.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,21 @@ -+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C2410 - GPIO core support -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_GPIO_CORE_H -+#define __ASM_ARCH_GPIO_CORE_H __FILE__ -+ -+/* currently we just include the platform support */ -+#include -+ -+#endif /* __ASM_ARCH_GPIO_CORE_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/gpio.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio.h 2009-01-02 00:01:56.000000000 +0100 -@@ -15,4 +15,14 @@ - #define gpio_set_value __gpio_set_value - #define gpio_cansleep __gpio_cansleep - -+/* These two defines should be removed as soon as the -+ * generic irq handling makes it upstream */ -+#include -+#define gpio_to_irq(gpio) s3c2410_gpio_getirq(gpio) -+#define irq_to_gpio(irq) s3c2410_gpio_irq2pin(irq) -+/* -- cut to here when generic irq makes it */ -+ - #include -+#include -+ -+#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,23 @@ -+/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h -+ * -+ * Copyright (c) 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C2410 - GPIO bank numbering -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) -+ -+#define S3C2410_GPIO_BANKA (32*0) -+#define S3C2410_GPIO_BANKB (32*1) -+#define S3C2410_GPIO_BANKC (32*2) -+#define S3C2410_GPIO_BANKD (32*3) -+#define S3C2410_GPIO_BANKE (32*4) -+#define S3C2410_GPIO_BANKF (32*5) -+#define S3C2410_GPIO_BANKG (32*6) -+#define S3C2410_GPIO_BANKH (32*7) -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta01.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta01.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,74 @@ -+#ifndef _GTA01_H -+#define _GTA01_H -+ -+#include -+#include -+ -+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -+#define GTA01v3_SYSTEM_REV 0x00000130 -+#define GTA01v4_SYSTEM_REV 0x00000140 -+#define GTA01Bv2_SYSTEM_REV 0x00000220 -+#define GTA01Bv3_SYSTEM_REV 0x00000230 -+#define GTA01Bv4_SYSTEM_REV 0x00000240 -+ -+/* Backlight */ -+ -+extern void gta01bl_deferred_resume(void); -+ -+struct gta01bl_machinfo { -+ unsigned int default_intensity; -+ unsigned int max_intensity; -+ unsigned int limit_mask; -+ unsigned int defer_resume_backlight; -+}; -+ -+/* Definitions common to all revisions */ -+#define GTA01_GPIO_BACKLIGHT S3C2410_GPB0 -+#define GTA01_GPIO_GPS_PWRON S3C2410_GPB1 -+#define GTA01_GPIO_MODEM_RST S3C2410_GPB6 -+#define GTA01_GPIO_MODEM_ON S3C2410_GPB7 -+#define GTA01_GPIO_LCD_RESET S3C2410_GPC6 -+#define GTA01_GPIO_PMU_IRQ S3C2410_GPG8 -+#define GTA01_GPIO_JACK_INSERT S3C2410_GPF4 -+#define GTA01_GPIO_nSD_DETECT S3C2410_GPF5 -+#define GTA01_GPIO_AUX_KEY S3C2410_GPF6 -+#define GTA01_GPIO_HOLD_KEY S3C2410_GPF7 -+#define GTA01_GPIO_VIBRATOR_ON S3C2410_GPG11 -+ -+#define GTA01_IRQ_MODEM IRQ_EINT1 -+#define GTA01_IRQ_JACK_INSERT IRQ_EINT4 -+#define GTA01_IRQ_nSD_DETECT IRQ_EINT5 -+#define GTA01_IRQ_AUX_KEY IRQ_EINT6 -+#define GTA01_IRQ_PCF50606 IRQ_EINT16 -+ -+/* GTA01v3 */ -+#define GTA01v3_GPIO_nGSM_EN S3C2410_GPG9 -+ -+/* GTA01v4 */ -+#define GTA01_GPIO_MODEM_DNLOAD S3C2410_GPG0 -+ -+/* GTA01Bv2 */ -+#define GTA01Bv2_GPIO_nGSM_EN S3C2410_GPF2 -+#define GTA01Bv2_GPIO_VIBRATOR_ON S3C2410_GPB10 -+ -+/* GTA01Bv3 */ -+#define GTA01_GPIO_GPS_EN_3V3 S3C2410_GPG9 -+ -+#define GTA01_GPIO_SDMMC_ON S3C2410_GPB2 -+#define GTA01_GPIO_BT_EN S3C2410_GPB5 -+#define GTA01_GPIO_AB_DETECT S3C2410_GPB8 -+#define GTA01_GPIO_USB_PULLUP S3C2410_GPB9 -+#define GTA01_GPIO_USB_ATTACH S3C2410_GPB10 -+ -+#define GTA01_GPIO_GPS_EN_2V8 S3C2410_GPG9 -+#define GTA01_GPIO_GPS_EN_3V S3C2410_GPG10 -+#define GTA01_GPIO_GPS_RESET S3C2410_GPC0 -+ -+/* GTA01Bv4 */ -+#define GTA01Bv4_GPIO_nNAND_WP S3C2410_GPA16 -+#define GTA01Bv4_GPIO_VIBRATOR_ON S3C2410_GPB3 -+#define GTA01Bv4_GPIO_PMU_IRQ S3C2410_GPG1 -+ -+#define GTA01Bv4_IRQ_PCF50606 IRQ_EINT9 -+ -+#endif /* _GTA01_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta02.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta02.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,113 @@ -+#ifndef _GTA02_H -+#define _GTA02_H -+ -+#include -+#include -+ -+#include -+ -+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -+#define GTA02v1_SYSTEM_REV 0x00000310 -+#define GTA02v2_SYSTEM_REV 0x00000320 -+#define GTA02v3_SYSTEM_REV 0x00000330 -+#define GTA02v4_SYSTEM_REV 0x00000340 -+#define GTA02v5_SYSTEM_REV 0x00000350 -+#define GTA02v6_SYSTEM_REV 0x00000360 -+ -+#define GTA02_GPIO_n3DL_GSM S3C2410_GPA13 /* v1 + v2 + v3 only */ -+ -+#define GTA02_GPIO_PWR_LED1 S3C2410_GPB0 -+#define GTA02_GPIO_PWR_LED2 S3C2410_GPB1 -+#define GTA02_GPIO_AUX_LED S3C2410_GPB2 -+#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB3 -+#define GTA02v1_GPIO_GPS_PWRON S3C2410_GPB4 /* v1 only */ -+#define GTA02_GPIO_MODEM_RST S3C2410_GPB5 -+#define GTA02_GPIO_BT_EN S3C2410_GPB6 -+#define GTA02_GPIO_MODEM_ON S3C2410_GPB7 -+#define GTA02v1_GPIO_EN_AGPS3V S3C2410_GPB8 /* v1 only */ -+#define GTA02_GPIO_EXTINT8 S3C2410_GPB8 -+#define GTA02_GPIO_USB_PULLUP S3C2410_GPB9 -+ -+#define GTA02v1_GPIO_nGPS_RST S3C2410_GPC0 /* v1 only */ -+#define GTA02v12_GPIO_PIO3 S3C2410_GPC5 /* v1 + v2 only */ -+#define GTA02_GPIO_PIO5 S3C2410_GPC5 /* v3 + v4 only */ -+#define GTA02_GPIO_LCD_RESET S3C2410_GPC6 /* v1 + v2 only */ -+#define GTA02v12_GPIO_PIO2 S3C2410_GPC7 /* v1 + v2 only */ -+#define GTA02v2_nUSB_FLT S3C2410_GPC9 /* v2 only */ -+#define GTA02v2_nUSB_OC S3C2410_GPC10 /* v2 only */ -+#define GTA02v2_nGSM_OC S3C2410_GPC12 /* v2 only */ -+ -+#define GTA02v3_GPIO_nG1_CS S3C2410_GPD12 /* v3 + v4 only */ -+#define GTA02v3_GPIO_nG2_CS S3C2410_GPD13 /* v3 + v4 only */ -+#define GTA02v5_GPIO_HDQ S3C2410_GPD14 /* v5 + */ -+ -+#define GTA02_GPIO_nG1_INT S3C2410_GPF0 -+#define GTA02_GPIO_IO1 S3C2410_GPF1 -+#define GTA02v1_GPIO_nG2_INT S3C2410_GPF2 /* v1 only */ -+#define GTA02_GPIO_PIO_2 S3C2410_GPF2 /* v2 + v3 + v4 only */ -+#define GTA02_GPIO_JACK_INSERT S3C2410_GPF4 -+#define GTA02v1_GPIO_nSD_DETECT S3C2410_GPF5 /* v1 only */ -+#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF5 /* v2 + v3 + v4 only */ -+#define GTA02_GPIO_AUX_KEY S3C2410_GPF6 -+#define GTA02_GPIO_HOLD_KEY S3C2410_GPF7 -+ -+#define GTA02_GPIO_3D_IRQ S3C2410_GPG4 -+#define GTA02v1_GPIO_nG1_CS S3C2410_GPG8 /* v1 only */ -+#define GTA02v2_GPIO_nG2_INT S3C2410_GPG8 /* v2 + v3 + v4 only */ -+#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG9 /* v3 + v4 only */ -+#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG10 /* v3 + v4 only */ -+#define GTA02v1_GPIO_nG2_CS S3C2410_GPG11 /* v1 only */ -+#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG11 /* v3 + v4 only */ -+ -+#define GTA02v1_GPIO_3D_RESET S3C2440_GPJ0 /* v1 only */ -+#define GTA02v2_GPIO_BAT_ID S3C2440_GPJ0 /* v2 only */ -+#define GTA02v1_GPIO_WLAN_GPIO8 S3C2440_GPJ1 /* v1 only */ -+#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */ -+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2 -+#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */ -+#define GTA02v1_GPIO_KEEPACT S3C2440_GPJ3 /* v1 only */ -+#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */ -+#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4 -+#define GTA02_GPIO_3D_RESET S3C2440_GPJ5 -+#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */ -+#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7 -+#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8 -+#define GTA02_GPIO_KEEPACT S3C2440_GPJ8 -+#define GTA02v1_GPIO_AMP_SHUT S3C2440_GPJ9 /* v1 only */ -+#define GTA02v2_nG1_CS S3C2440_GPJ9 /* v2 only */ -+#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10 -+#define GTA02v2_nG2_CS S3C2440_GPJ10 /* v2 only */ -+#define GTA02v1_GPIO_INT0 S3C2440_GPJ11 /* v1 only */ -+#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */ -+#define GTA02v1_GPIO_nGSM_EN S3C2440_GPJ12 /* v1 only */ -+#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */ -+ -+#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -+#define GTA02_IRQ_MODEM IRQ_EINT1 -+#define GTA02v1_IRQ_GSENSOR_2 IRQ_EINT2 /* v1 only */ -+#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -+#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -+#define GTA02v1_IRQ_nSD_CD IRQ_EINT5 /* v1 only */ -+#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -+#define GTA02_IRQ_AUX IRQ_EINT6 -+#define GTA02_IRQ_nHOLD IRQ_EINT7 -+#define GTA02v1_IRQ_nSIM_CD IRQ_EINT8 /* v1 only */ -+#define GTA02_IRQ_PCF50633 IRQ_EINT9 -+#define GTA02_IRQ_3D IRQ_EINT12 -+#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -+#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -+#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -+#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ -+ -+/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -+#define GTA02_PCB_ID1_0 S3C2410_GPC13 -+#define GTA02_PCB_ID1_1 S3C2410_GPC15 -+#define GTA02_PCB_ID1_2 S3C2410_GPD0 -+#define GTA02_PCB_ID2_0 S3C2410_GPD3 -+#define GTA02_PCB_ID2_1 S3C2410_GPD4 -+ -+int gta02_get_pcb_revision(void); -+ -+extern struct pcf50633_platform_data gta02_pcf_pdata; -+ -+#endif /* _GTA02_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/gta02-pm-wlan.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1 @@ -+void gta02_wlan_power(int on); -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/irqs.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/irqs.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/irqs.h 2009-01-02 00:01:56.000000000 +0100 -@@ -12,9 +12,9 @@ - #ifndef __ASM_ARCH_IRQS_H - #define __ASM_ARCH_IRQS_H __FILE__ - --#ifndef __ASM_ARM_IRQ_H --#error "Do not include this directly, instead #include " --#endif -+//#ifndef __ASM_ARM_IRQ_H -+//#error "Do not include this directly, instead #include " -+//#endif - - /* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself -@@ -84,7 +84,7 @@ - #define IRQ_EINT22 S3C2410_IRQ(50) - #define IRQ_EINT23 S3C2410_IRQ(51) - -- -+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) - #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) - - #define IRQ_LCD_FIFO S3C2410_IRQ(52) -@@ -134,6 +134,8 @@ - #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ - #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ - -+#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC -+ - #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) - #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) - #define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) -@@ -155,12 +157,47 @@ - #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) - - #ifdef CONFIG_CPU_S3C2443 --#define NR_IRQS (IRQ_S3C2443_AC97+1) -+#define _NR_IRQS (IRQ_S3C2443_AC97+1) - #else --#define NR_IRQS (IRQ_S3C2440_AC97+1) -+#define _NR_IRQS (IRQ_S3C2440_AC97+1) - #endif - -+/* compatibility define. */ -+#define IRQ_UART3 IRQ_S3C2443_UART3 -+#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3 -+#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 -+#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 -+ - /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ - #define FIQ_START IRQ_EINT0 - -+ -+/* -+ * The next 16 interrupts are for board specific purposes. Since -+ * the kernel can only run on one machine at a time, we can re-use -+ * these. If you need more, increase IRQ_BOARD_END, but keep it -+ * within sensible limits. -+ */ -+#define IRQ_BOARD_START _NR_IRQS -+#define IRQ_BOARD_END (_NR_IRQS + 10) -+ -+#if defined(CONFIG_MACH_NEO1973_GTA02) -+#define NR_IRQS (IRQ_BOARD_END) -+#else -+#define NR_IRQS (IRQ_BOARD_START) -+#endif -+ -+/* Neo1973 GTA02 interrupts */ -+#define NEO1973_GTA02_IRQ(x) (IRQ_BOARD_START + (x)) -+#define IRQ_GLAMO(x) NEO1973_GTA02_IRQ(x) -+#define IRQ_GLAMO_HOSTBUS IRQ_GLAMO(0) -+#define IRQ_GLAMO_JPEG IRQ_GLAMO(1) -+#define IRQ_GLAMO_MPEG IRQ_GLAMO(2) -+#define IRQ_GLAMO_MPROC1 IRQ_GLAMO(3) -+#define IRQ_GLAMO_MPROC0 IRQ_GLAMO(4) -+#define IRQ_GLAMO_CMDQUEUE IRQ_GLAMO(5) -+#define IRQ_GLAMO_2D IRQ_GLAMO(6) -+#define IRQ_GLAMO_MMC IRQ_GLAMO(7) -+#define IRQ_GLAMO_RISC IRQ_GLAMO(8) -+ - #endif /* __ASM_ARCH_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/map.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/map.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/map.h 2009-01-02 00:01:56.000000000 +0100 -@@ -13,34 +13,20 @@ - #ifndef __ASM_ARCH_MAP_H - #define __ASM_ARCH_MAP_H - -+#include - #include - - #define S3C2410_ADDR(x) S3C_ADDR(x) - --/* interrupt controller is the first thing we put in, to make -- * the assembly code for the irq detection easier -- */ --#define S3C24XX_VA_IRQ S3C_VA_IRQ --#define S3C2410_PA_IRQ (0x4A000000) --#define S3C24XX_SZ_IRQ SZ_1M -- --/* memory controller registers */ --#define S3C24XX_VA_MEMCTRL S3C_VA_MEM --#define S3C2410_PA_MEMCTRL (0x48000000) --#define S3C24XX_SZ_MEMCTRL SZ_1M -- - /* USB host controller */ - #define S3C2410_PA_USBHOST (0x49000000) --#define S3C24XX_SZ_USBHOST SZ_1M - - /* DMA controller */ - #define S3C2410_PA_DMA (0x4B000000) - #define S3C24XX_SZ_DMA SZ_1M - - /* Clock and Power management */ --#define S3C24XX_VA_CLKPWR S3C_VA_SYS - #define S3C2410_PA_CLKPWR (0x4C000000) --#define S3C24XX_SZ_CLKPWR SZ_1M - - /* LCD controller */ - #define S3C2410_PA_LCD (0x4D000000) -@@ -48,48 +34,12 @@ - - /* NAND flash controller */ - #define S3C2410_PA_NAND (0x4E000000) --#define S3C24XX_SZ_NAND SZ_1M -- --/* UARTs */ --#define S3C24XX_VA_UART S3C_VA_UART --#define S3C2410_PA_UART (0x50000000) --#define S3C24XX_SZ_UART SZ_1M -- --/* Timers */ --#define S3C24XX_VA_TIMER S3C_VA_TIMER --#define S3C2410_PA_TIMER (0x51000000) --#define S3C24XX_SZ_TIMER SZ_1M -- --/* USB Device port */ --#define S3C2410_PA_USBDEV (0x52000000) --#define S3C24XX_SZ_USBDEV SZ_1M -- --/* Watchdog */ --#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG --#define S3C2410_PA_WATCHDOG (0x53000000) --#define S3C24XX_SZ_WATCHDOG SZ_1M - - /* IIC hardware controller */ - #define S3C2410_PA_IIC (0x54000000) --#define S3C24XX_SZ_IIC SZ_1M - - /* IIS controller */ - #define S3C2410_PA_IIS (0x55000000) --#define S3C24XX_SZ_IIS SZ_1M -- --/* GPIO ports */ -- --/* the calculation for the VA of this must ensure that -- * it is the same distance apart from the UART in the -- * phsyical address space, as the initial mapping for the IO -- * is done as a 1:1 maping. This puts it (currently) at -- * 0xFA800000, which is not in the way of any current mapping -- * by the base system. --*/ -- --#define S3C2410_PA_GPIO (0x56000000) --#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) --#define S3C24XX_SZ_GPIO SZ_1M - - /* RTC */ - #define S3C2410_PA_RTC (0x57000000) -@@ -97,15 +47,12 @@ - - /* ADC */ - #define S3C2410_PA_ADC (0x58000000) --#define S3C24XX_SZ_ADC SZ_1M - - /* SPI */ - #define S3C2410_PA_SPI (0x59000000) --#define S3C24XX_SZ_SPI SZ_1M - - /* SDI */ - #define S3C2410_PA_SDI (0x5A000000) --#define S3C24XX_SZ_SDI SZ_1M - - /* CAMIF */ - #define S3C2440_PA_CAMIF (0x4F000000) -@@ -120,13 +67,6 @@ - #define S3C2443_PA_HSMMC (0x4A800000) - #define S3C2443_SZ_HSMMC (256) - --/* ISA style IO, for each machine to sort out mappings for, if it -- * implements it. We reserve two 16M regions for ISA. -- */ -- --#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) --#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) -- - /* physical addresses of all the chip-select areas */ - - #define S3C2410_CS0 (0x00000000) -@@ -152,27 +92,16 @@ - #define S3C24XX_PA_TIMER S3C2410_PA_TIMER - #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV - #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG --#define S3C24XX_PA_IIC S3C2410_PA_IIC - #define S3C24XX_PA_IIS S3C2410_PA_IIS - #define S3C24XX_PA_GPIO S3C2410_PA_GPIO - #define S3C24XX_PA_RTC S3C2410_PA_RTC - #define S3C24XX_PA_ADC S3C2410_PA_ADC - #define S3C24XX_PA_SPI S3C2410_PA_SPI -+#define S3C24XX_PA_SDI S3C2410_PA_SDI -+#define S3C24XX_PA_NAND S3C2410_PA_NAND - --/* deal with the registers that move under the 2412/2413 */ -- --#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) --#ifndef __ASSEMBLY__ --extern void __iomem *s3c24xx_va_gpio2; --#endif --#ifdef CONFIG_CPU_S3C2412_ONLY --#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) --#else --#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 --#endif --#else --#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO --#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO --#endif -+#define S3C_PA_IIC S3C2410_PA_IIC -+#define S3C_PA_UART S3C24XX_PA_UART -+#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC - - #endif /* __ASM_ARCH_MAP_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/mci.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/mci.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,13 @@ -+#ifndef _ARCH_MCI_H -+#define _ARCH_MCI_H -+ -+struct s3c24xx_mci_pdata { -+ unsigned int gpio_detect; -+ unsigned int gpio_wprotect; -+ unsigned long ocr_avail; -+ unsigned int do_dma; -+ void (*set_power)(unsigned char power_mode, -+ unsigned short vdd); -+}; -+ -+#endif /* _ARCH_NCI_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/neo1973-pm-gsm.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1 @@ -+extern int gta_gsm_interrupts; -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/pwm.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/pwm.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,46 @@ -+#ifndef __S3C2410_PWM_H -+#define __S3C2410_PWM_H -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+enum pwm_timer { -+ PWM0, -+ PWM1, -+ PWM2, -+ PWM3, -+ PWM4 -+}; -+ -+struct s3c2410_pwm { -+ enum pwm_timer timerid; -+ struct clk *pclk; -+ unsigned long pclk_rate; -+ unsigned long prescaler; -+ unsigned long divider; -+ unsigned long counter; -+ unsigned long comparer; -+}; -+ -+struct s3c24xx_pwm_platform_data{ -+ /* callback to attach platform children (to enforce suspend / resume -+ * ordering */ -+ void (*attach_child_devices)(struct device *parent_device); -+}; -+ -+int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm); -+int s3c2410_pwm_dumpregs(void); -+ -+#endif /* __S3C2410_PWM_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-clock.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/regs-clock.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-clock.h 2009-01-02 00:01:56.000000000 +0100 -@@ -42,13 +42,6 @@ - #define S3C2410_CLKCON_IIS (1<<17) - #define S3C2410_CLKCON_SPI (1<<18) - --#define S3C2410_PLLCON_MDIVSHIFT 12 --#define S3C2410_PLLCON_PDIVSHIFT 4 --#define S3C2410_PLLCON_SDIVSHIFT 0 --#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) --#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) --#define S3C2410_PLLCON_SDIVMASK 3 -- - /* DCLKCON register addresses in gpio.h */ - - #define S3C2410_DCLKCON_DCLK0EN (1<<0) -@@ -76,32 +69,6 @@ - #define S3C2410_CLKSLOW_SLOWVAL(x) (x) - #define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) - --#ifndef __ASSEMBLY__ -- --#include -- --static inline unsigned int --s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) --{ -- unsigned int mdiv, pdiv, sdiv; -- uint64_t fvco; -- -- mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; -- pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; -- sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; -- -- mdiv &= S3C2410_PLLCON_MDIVMASK; -- pdiv &= S3C2410_PLLCON_PDIVMASK; -- sdiv &= S3C2410_PLLCON_SDIVMASK; -- -- fvco = (uint64_t)baseclk * (mdiv + 8); -- do_div(fvco, (pdiv + 2) << sdiv); -- -- return (unsigned int)fvco; --} -- --#endif /* __ASSEMBLY__ */ -- - #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - - /* extra registers */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-gpio.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/regs-gpio.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-gpio.h 2009-01-02 00:01:56.000000000 +0100 -@@ -14,16 +14,7 @@ - #ifndef __ASM_ARCH_REGS_GPIO_H - #define __ASM_ARCH_REGS_GPIO_H - --#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) -- --#define S3C2410_GPIO_BANKA (32*0) --#define S3C2410_GPIO_BANKB (32*1) --#define S3C2410_GPIO_BANKC (32*2) --#define S3C2410_GPIO_BANKD (32*3) --#define S3C2410_GPIO_BANKE (32*4) --#define S3C2410_GPIO_BANKF (32*5) --#define S3C2410_GPIO_BANKG (32*6) --#define S3C2410_GPIO_BANKH (32*7) -+#include - - #ifdef CONFIG_CPU_S3C2400 - #define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -@@ -1053,13 +1044,6 @@ - #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) - #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) - --/* values for S3C2410_EXTINT0/1/2 */ --#define S3C2410_EXTINT_LOWLEV (0x00) --#define S3C2410_EXTINT_HILEV (0x01) --#define S3C2410_EXTINT_FALLEDGE (0x02) --#define S3C2410_EXTINT_RISEEDGE (0x04) --#define S3C2410_EXTINT_BOTHEDGE (0x06) -- - /* interrupt filtering conrrol for EINT16..EINT23 */ - #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) - #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-sdi.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/regs-sdi.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/regs-sdi.h 2009-01-02 00:01:56.000000000 +0100 -@@ -30,6 +30,7 @@ - #define S3C2410_SDIFSTA (0x38) - - #define S3C2410_SDIDATA (0x3C) -+#define S3C2410_SDIDATA_BYTE (0x3C) - #define S3C2410_SDIIMSK (0x40) - - #define S3C2440_SDIDATA (0x40) -@@ -37,6 +38,8 @@ - - #define S3C2440_SDICON_SDRESET (1<<8) - #define S3C2440_SDICON_MMCCLOCK (1<<5) -+#define S3C2440_SDIDATA_BYTE (0x48) -+ - #define S3C2410_SDICON_BYTEORDER (1<<4) - #define S3C2410_SDICON_SDIOIRQ (1<<3) - #define S3C2410_SDICON_RWAITEN (1<<2) -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/s3c24xx-serial.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,5 @@ -+#include -+ -+extern void s3c24xx_serial_console_set_silence(int silence); -+extern void s3c24xx_serial_register_resume_dependency(struct resume_dependency * -+ resume_dependency, int uart_index); -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi-gpio.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/spi-gpio.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi-gpio.h 2009-01-02 00:43:03.000000000 +0100 -@@ -21,7 +21,15 @@ struct s3c2410_spigpio_info { - int num_chipselect; - int bus_num; - -- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -+ /* -+ * FIXME: board_size and board_info DO NOT belong here. -+ * These were already removed upstream... but we still rely on them -+ * so leave for now and revisit this. -+ */ -+ unsigned long board_size; -+ struct spi_board_info *board_info; -+ -+ void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs); - }; - - -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/spi.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/spi.h 2009-01-02 00:01:56.000000000 +0100 -@@ -22,5 +22,12 @@ struct s3c2410_spi_info { - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); - }; - -+/* Standard setup / suspend routines for SPI GPIO pins. */ -+ -+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, -+ int enable); -+ -+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, -+ int enable); - - #endif /* __ASM_ARCH_SPI_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/system-reset.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/system-reset.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/system-reset.h 2009-01-02 00:01:56.000000000 +0100 -@@ -13,7 +13,7 @@ - #include - #include - --#include -+#include - #include - - #include -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/tick.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/tick.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,15 @@ -+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h -+ * -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C2410 - timer tick support -+ */ -+ -+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) -+ -+static inline int s3c24xx_ostimer_pending(void) -+{ -+ return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -+} -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/timex.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/timex.h 2008-12-25 00:26:37.000000000 +0100 -+++ /dev/null 1970-01-01 00:00:00.000000000 +0000 -@@ -1,26 +0,0 @@ --/* arch/arm/mach-s3c2410/include/mach/timex.h -- * -- * Copyright (c) 2003-2005 Simtec Electronics -- * Ben Dooks -- * -- * S3C2410 - time parameters -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. --*/ -- --#ifndef __ASM_ARCH_TIMEX_H --#define __ASM_ARCH_TIMEX_H -- --/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -- * a variable is useless. It seems as long as we make our timers an -- * exact multiple of HZ, any value that makes a 1->1 correspondence -- * for the time conversion functions to/from jiffies is acceptable. --*/ -- -- --#define CLOCK_TICK_RATE 12000000 -- -- --#endif /* __ASM_ARCH_TIMEX_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/ts.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/ts.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,35 @@ -+/* arch/arm/mach-s3c2410/include/mach/ts.h -+ * -+ * Copyright (c) 2005 Arnaud Patard -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * Changelog: -+ * 24-Mar-2005 RTP Created file -+ * 03-Aug-2005 RTP Renamed to ts.h -+ */ -+ -+#ifndef __ASM_ARM_TS_H -+#define __ASM_ARM_TS_H -+ -+#include -+ -+struct s3c2410_ts_mach_info { -+ int delay; -+ int presc; -+ /* array of pointers to filter APIs we want to use, in order -+ * ends on first NULL, all NULL is OK -+ */ -+ struct ts_filter_api *filter_sequence[MAX_TS_FILTER_CHAIN]; -+ /* array of configuration ints, one for each filter above */ -+ void *filter_config[MAX_TS_FILTER_CHAIN]; -+}; -+ -+void set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info); -+ -+#endif /* __ASM_ARM_TS_H */ -+ -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/uncompress.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/uncompress.h 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/include/mach/uncompress.h 2009-01-02 00:01:56.000000000 +0100 -@@ -1,3 +1,4 @@ -+ - /* arch/arm/mach-s3c2410/include/mach/uncompress.h - * - * Copyright (c) 2003, 2007 Simtec Electronics -Index: linux-2.6.28/arch/arm/mach-s3c2410/include/mach/vmalloc.h -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/include/mach/vmalloc.h 2008-12-25 00:26:37.000000000 +0100 -+++ /dev/null 1970-01-01 00:00:00.000000000 +0000 -@@ -1,20 +0,0 @@ --/* arch/arm/mach-s3c2410/include/mach/vmalloc.h -- * -- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h -- * -- * Copyright (c) 2003 Simtec Electronics -- * http://www.simtec.co.uk/products/SWLINUX/ -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- * -- * S3C2410 vmalloc definition --*/ -- --#ifndef __ASM_ARCH_VMALLOC_H --#define __ASM_ARCH_VMALLOC_H -- --#define VMALLOC_END (0xE0000000) -- --#endif /* __ASM_ARCH_VMALLOC_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2410/Kconfig -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/Kconfig 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -9,6 +9,7 @@ config CPU_S3C2410 - depends on ARCH_S3C2410 - select S3C2410_CLOCK - select S3C2410_GPIO -+ select S3C2410_PWM - select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM - help -@@ -32,11 +33,6 @@ config S3C2410_GPIO - help - GPIO code for S3C2410 and similar processors - --config S3C2410_CLOCK -- bool -- help -- Clock code for the S3C2410, and similar processors -- - config SIMTEC_NOR - bool - help -@@ -49,6 +45,12 @@ config MACH_BAST_IDE - Internal node for machines with an BAST style IDE - interface - -+config S3C2410_PWM -+ bool -+ help -+ PWM timer code for the S3C2410, and similar processors -+ -+ - menu "S3C2410 Machines" - - config ARCH_SMDK2410 -@@ -84,6 +86,7 @@ config ARCH_BAST - select PM_SIMTEC if PM - select SIMTEC_NOR - select MACH_BAST_IDE -+ select S3C24XX_DCLK - select ISA - help - Say Y here if you are using the Simtec Electronics EB2410ITX -@@ -121,6 +124,7 @@ config MACH_TCT_HAMMER - config MACH_VR1000 - bool "Thorcom VR1000" - select PM_SIMTEC if PM -+ select S3C24XX_DCLK - select SIMTEC_NOR - select MACH_BAST_IDE - select CPU_S3C2410 -@@ -130,7 +134,16 @@ config MACH_VR1000 - config MACH_QT2410 - bool "QT2410" - select CPU_S3C2410 -+ select DISPLAY_JBT6K74 - help - Say Y here if you are using the Armzone QT2410 - -+config MACH_NEO1973_GTA01 -+ bool "FIC Neo1973 GSM Phone (GTA01 Hardware)" -+ select CPU_S3C2410 -+ select MACH_NEO1973 -+ select SENSORS_PCF50606 -+ help -+ Say Y here if you are using the FIC Neo1973 GSM Phone -+ - endmenu -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-amlm5900.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-amlm5900.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-amlm5900.c 2009-01-02 00:01:56.000000000 +0100 -@@ -52,6 +52,7 @@ - #include - #include - -+#include - #include - #include - -@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_ - #endif - &s3c_device_adc, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_usb, - &s3c_device_rtc, - &s3c_device_usbgadget, -@@ -233,6 +234,7 @@ static void __init amlm5900_init(void) - #ifdef CONFIG_FB_S3C2410 - s3c24xx_fb_set_platdata(&amlm5900_fb_info); - #endif -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-bast.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-bast.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-bast.c 2009-01-02 00:01:56.000000000 +0100 -@@ -44,8 +44,8 @@ - #include - #include - --#include --#include -+#include -+#include - #include - - #include -@@ -406,7 +406,7 @@ static struct platform_device bast_sio = - * standard 100KHz i2c bus frequency - */ - --static struct s3c2410_platform_i2c bast_i2c_info = { -+static struct s3c2410_platform_i2c __initdata bast_i2c_info = { - .flags = 0, - .slave_addr = 0x10, - .bus_freq = 100*1000, -@@ -553,7 +553,7 @@ static struct platform_device *bast_devi - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &bast_device_dm9k, -@@ -588,7 +588,8 @@ static void __init bast_map_io(void) - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - - s3c_device_nand.dev.platform_data = &bast_nand_info; -- s3c_device_i2c.dev.platform_data = &bast_i2c_info; -+ -+ s3c_i2c0_set_platdata(&bast_i2c_info); - - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-gta01.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-gta01.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,786 @@ -+/* -+ * linux/arch/arm/mach-s3c2410/mach-gta01.c -+ * -+ * S3C2410 Machine Support for the FIC Neo1973 GTA01 -+ * -+ * Copyright (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+ -+static struct map_desc gta01_iodesc[] __initdata = { -+ { -+ .virtual = 0xe0000000, -+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), -+ .length = SZ_1M, -+ .type = MT_DEVICE -+ }, -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+/* UFCON for the gta01 sets the FIFO trigger level at 4, not 8 */ -+#define UFCON_GTA01_PORT0 S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg gta01_uartcfgs[] = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON_GTA01_PORT0, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+}; -+ -+/* PMU driver info */ -+ -+static int pmu_callback(struct device *dev, unsigned int feature, -+ enum pmu_event event) -+{ -+ switch (feature) { -+ case PCF50606_FEAT_ACD: -+ switch (event) { -+ case PMU_EVT_INSERT: -+ pcf50606_charge_fast(pcf50606_global, 1); -+ break; -+ case PMU_EVT_REMOVE: -+ pcf50606_charge_fast(pcf50606_global, 0); -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static struct pcf50606_platform_data gta01_pcf_pdata = { -+ .used_features = PCF50606_FEAT_EXTON | -+ PCF50606_FEAT_MBC | -+ PCF50606_FEAT_BBC | -+ PCF50606_FEAT_RTC | -+ PCF50606_FEAT_WDT | -+ PCF50606_FEAT_CHGCUR | -+ PCF50606_FEAT_BATVOLT | -+ PCF50606_FEAT_BATTEMP, -+ .onkey_seconds_required = 3, -+ .cb = &pmu_callback, -+ .r_fix_batt = 10000, -+ .r_fix_batt_par = 10000, -+ .r_sense_milli = 220, -+ .rails = { -+ [PCF50606_REGULATOR_D1REG] = { -+ .name = "bt_3v15", -+ .voltage = { -+ .init = 3150, -+ .max = 3150, -+ }, -+ }, -+ [PCF50606_REGULATOR_D2REG] = { -+ .name = "gl_2v5", -+ .voltage = { -+ .init = 2500, -+ .max = 2500, -+ }, -+ }, -+ [PCF50606_REGULATOR_D3REG] = { -+ .name = "stby_1v8", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 1800, -+ .max = 2100, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCD] = { -+ .name = "gl_1v5", -+ .voltage = { -+ .init = 1500, -+ .max = 1500, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCDE] = { -+ .name = "io_3v3", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 3300, -+ .max = 3330, -+ }, -+ }, -+ [PCF50606_REGULATOR_DCUD] = { -+ .name = "core_1v8", -+ .flags = PMU_VRAIL_F_SUSPEND_ON, -+ .voltage = { -+ .init = 2100, -+ .max = 2100, -+ }, -+ }, -+ [PCF50606_REGULATOR_IOREG] = { -+ .name = "codec_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ }, -+ [PCF50606_REGULATOR_LPREG] = { -+ .name = "lcm_3v3", -+ .voltage = { -+ .init = 3300, -+ .max = 3300, -+ }, -+ } -+ }, -+}; -+ -+static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name, -+ unsigned int flags, unsigned int init, -+ unsigned int max) -+{ -+ vrail->name = name; -+ vrail->flags = flags; -+ vrail->voltage.init = init; -+ vrail->voltage.max = max; -+} -+ -+static void mangle_pmu_pdata_by_system_rev(void) -+{ -+ switch (system_rev) { -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; -+ break; -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .name = "user1"; -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .flags &= ~PMU_VRAIL_F_SUSPEND_ON; -+ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] -+ .flags = PMU_VRAIL_F_UNUSED; -+ break; -+ case GTA01v4_SYSTEM_REV: -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], -+ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], -+ "vrf_3v", 0, 3000, 3000); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], -+ "vtcxo_2v8", 0, 2800, 2800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], -+ "gl_3v5", 0, 3500, 3500); -+ break; -+ case GTA01v3_SYSTEM_REV: -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], -+ "vrf_3v", 0, 3000, 3000); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D2REG], -+ "sd_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], -+ "codec_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], -+ "gpsio_3v3", 0, 3300, 3300); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], -+ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); -+ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_IOREG], -+ "vtcxo_2v8", 0, 2800, 2800); -+ break; -+ } -+} -+ -+static struct resource gta01_pmu_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = GTA01_IRQ_PCF50606, -+ .end = GTA01_IRQ_PCF50606, -+ }, -+}; -+ -+struct platform_device gta01_pmu_dev = { -+ .name = "pcf50606", -+ .num_resources = ARRAY_SIZE(gta01_pmu_resources), -+ .resource = gta01_pmu_resources, -+ .dev = { -+ .platform_data = >a01_pcf_pdata, -+ }, -+}; -+ -+/* LCD driver info */ -+ -+/* Configuration for 480x640 toppoly TD028TTEC1. -+ * Do not mark this as __initdata or it will break! */ -+static struct s3c2410fb_display gta01_displays[] = { -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 32, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+ { -+ .type = S3C2410_LCDCON1_TFT, -+ .width = 43, -+ .height = 58, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ -+ .pixclock = 40000, /* HCLK/4 */ -+ .left_margin = 104, -+ .right_margin = 8, -+ .hsync_len = 8, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .vsync_len = 2, -+ .lcdcon5 = S3C2410_LCDCON5_FRM565 | -+ S3C2410_LCDCON5_INVVCLK | -+ S3C2410_LCDCON5_INVVLINE | -+ S3C2410_LCDCON5_INVVFRAME | -+ S3C2410_LCDCON5_PWREN | -+ S3C2410_LCDCON5_HWSWP, -+ }, -+}; -+ -+static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = { -+ .displays = gta01_displays, -+ .num_displays = ARRAY_SIZE(gta01_displays), -+ .default_display = 0, -+ -+ .lpcsel = ((0xCE6) & ~7) | 1<<4, -+}; -+ -+static struct platform_device *gta01_devices[] __initdata = { -+ &s3c_device_usb, -+ &s3c_device_lcd, -+ &s3c_device_wdt, -+ &s3c_device_i2c0, -+ &s3c_device_iis, -+ &s3c_device_sdi, -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ &s3c_device_ts, -+}; -+ -+static struct s3c2410_nand_set gta01_nand_sets[] = { -+ [0] = { -+ .name = "neo1973-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+static struct s3c2410_platform_nand gta01_nand_info = { -+ .tacls = 20, -+ .twrph0 = 60, -+ .twrph1 = 20, -+ .nr_sets = ARRAY_SIZE(gta01_nand_sets), -+ .sets = gta01_nand_sets, -+}; -+ -+static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd) -+{ -+ int bit; -+ int mv = 1700; /* 1.7V for MMC_VDD_165_195 */ -+ -+ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u)\n", -+ power_mode, vdd); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ switch (power_mode) { -+ case MMC_POWER_OFF: -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, 0); -+ break; -+ case MMC_POWER_ON: -+ /* translate MMC_VDD_* VDD bit to mv */ -+ for (bit = 8; bit != 24; bit++) -+ if (vdd == (1 << bit)) -+ mv += 100 * (bit - 4); -+ pcf50606_voltage_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, mv); -+ pcf50606_onoff_set(pcf50606_global, -+ PCF50606_REGULATOR_D2REG, 1); -+ break; -+ } -+ break; -+ case GTA01v4_SYSTEM_REV: -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ case GTA01Bv4_SYSTEM_REV: -+ switch (power_mode) { -+ case MMC_POWER_OFF: -+ neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 1); -+ break; -+ case MMC_POWER_ON: -+ neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 0); -+ break; -+ } -+ break; -+ } -+} -+ -+static struct s3c24xx_mci_pdata gta01_mmc_cfg = { -+ .gpio_detect = GTA01_GPIO_nSD_DETECT, -+ .set_power = >a01_mmc_set_power, -+ .ocr_avail = MMC_VDD_165_195|MMC_VDD_20_21| -+ MMC_VDD_21_22|MMC_VDD_22_23|MMC_VDD_23_24| -+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| -+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| -+ MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33, -+}; -+ -+static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); -+ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 0); -+ break; -+ default: -+ break; -+ } -+} -+ -+/* use a work queue, since I2C API inherently schedules -+ * and we get called in hardirq context from UDC driver */ -+ -+struct vbus_draw { -+ struct work_struct work; -+ int ma; -+}; -+static struct vbus_draw gta01_udc_vbus_drawer; -+ -+static void __gta01_udc_vbus_draw(struct work_struct *work) -+{ -+ /* this is a fix to work around boot-time ordering problems if the -+ * s3c2410_udc is initialized before the pcf50606 driver has defined -+ * pcf50606_global */ -+ if (!pcf50606_global) -+ return; -+ -+ if (gta01_udc_vbus_drawer.ma >= 500) { -+ /* enable fast charge */ -+ printk(KERN_DEBUG "udc: enabling fast charge\n"); -+ pcf50606_charge_fast(pcf50606_global, 1); -+ } else { -+ /* disable fast charge */ -+ printk(KERN_DEBUG "udc: disabling fast charge\n"); -+ pcf50606_charge_fast(pcf50606_global, 0); -+ } -+} -+ -+static void gta01_udc_vbus_draw(unsigned int ma) -+{ -+ gta01_udc_vbus_drawer.ma = ma; -+ schedule_work(>a01_udc_vbus_drawer.work); -+} -+ -+static struct s3c2410_udc_mach_info gta01_udc_cfg = { -+ .vbus_draw = gta01_udc_vbus_draw, -+}; -+ -+ -+/* touchscreen configuration */ -+ -+static struct ts_filter_median_configuration gta01_ts_median_config = { -+ .extent = 31, -+ .decimation_below = 24, -+ .decimation_threshold = 8 * 3, -+ .decimation_above = 12, -+}; -+ -+static struct ts_filter_mean_configuration gta01_ts_mean_config = { -+ .bits_filter_length = 5, -+ .averaging_threshold = 12 -+}; -+ -+static struct s3c2410_ts_mach_info gta01_ts_cfg = { -+ .delay = 10000, -+ .presc = 0xff, /* slow as we can go */ -+ .filter_sequence = { -+ [0] = &ts_filter_median_api, -+ [1] = &ts_filter_mean_api, -+ }, -+ .filter_config = { -+ [0] = >a01_ts_median_config, -+ [1] = >a01_ts_mean_config, -+ }, -+}; -+ -+ -+/* SPI */ -+ -+static void gta01_jbt6k74_reset(int devidx, int level) -+{ -+ /* empty place holder; gta01 does not yet use this */ -+ printk(KERN_DEBUG "gta01_jbt6k74_reset\n"); -+} -+ -+static void gta01_jbt6k74_resuming(int devidx) -+{ -+ gta01bl_deferred_resume(); -+} -+ -+const struct jbt6k74_platform_data gta01_jbt6k74_pdata = { -+ .reset = gta01_jbt6k74_reset, -+ .resuming = gta01_jbt6k74_resuming, -+}; -+ -+static struct spi_board_info gta01_spi_board_info[] = { -+ { -+ .modalias = "jbt6k74", -+ .platform_data = >a01_jbt6k74_pdata, -+ /* controller_data */ -+ /* irq */ -+ .max_speed_hz = 10 * 1000 * 1000, -+ .bus_num = 1, -+ /* chip_select */ -+ }, -+}; -+ -+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) -+{ -+ switch (cs) { -+ case BITBANG_CS_ACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 0); -+ break; -+ case BITBANG_CS_INACTIVE: -+ s3c2410_gpio_setpin(S3C2410_GPG3, 1); -+ break; -+ } -+} -+ -+static struct s3c2410_spigpio_info spi_gpio_cfg = { -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .board_size = ARRAY_SIZE(gta01_spi_board_info), -+ .board_info = gta01_spi_board_info, -+ .chip_select = &spi_gpio_cs, -+ .num_chipselect = 2, /*** Should be 1 or 2 for gta01? ***/ -+}; -+ -+static struct resource s3c_spi_lcm_resource[] = { -+ [0] = { -+ .start = S3C2410_GPG3, -+ .end = S3C2410_GPG3, -+ }, -+ [1] = { -+ .start = S3C2410_GPG5, -+ .end = S3C2410_GPG5, -+ }, -+ [2] = { -+ .start = S3C2410_GPG6, -+ .end = S3C2410_GPG6, -+ }, -+ [3] = { -+ .start = S3C2410_GPG7, -+ .end = S3C2410_GPG7, -+ }, -+}; -+ -+struct platform_device s3c_device_spi_lcm = { -+ .name = "spi_s3c24xx_gpio", -+ .id = 1, -+ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource), -+ .resource = s3c_spi_lcm_resource, -+ .dev = { -+ .platform_data = &spi_gpio_cfg, -+ }, -+}; -+ -+static struct gta01bl_machinfo backlight_machinfo = { -+ .default_intensity = 1, -+ .max_intensity = 1, -+ .limit_mask = 1, -+ .defer_resume_backlight = 1, -+}; -+ -+static struct resource gta01_bl_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_BACKLIGHT, -+ .end = GTA01_GPIO_BACKLIGHT, -+ }, -+}; -+ -+struct platform_device gta01_bl_dev = { -+ .name = "gta01-bl", -+ .num_resources = ARRAY_SIZE(gta01_bl_resources), -+ .resource = gta01_bl_resources, -+ .dev = { -+ .platform_data = &backlight_machinfo, -+ }, -+}; -+ -+static struct resource gta01_led_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_VIBRATOR_ON, -+ .end = GTA01_GPIO_VIBRATOR_ON, -+ }, -+}; -+ -+struct platform_device gta01_led_dev = { -+ .name = "neo1973-vibrator", -+ .num_resources = ARRAY_SIZE(gta01_led_resources), -+ .resource = gta01_led_resources, -+}; -+ -+static struct resource gta01_button_resources[] = { -+ [0] = { -+ .start = GTA01_GPIO_AUX_KEY, -+ .end = GTA01_GPIO_AUX_KEY, -+ }, -+ [1] = { -+ .start = GTA01_GPIO_HOLD_KEY, -+ .end = GTA01_GPIO_HOLD_KEY, -+ }, -+ [2] = { -+ .start = GTA01_GPIO_JACK_INSERT, -+ .end = GTA01_GPIO_JACK_INSERT, -+ }, -+ [3] = { -+ .start = 0, -+ .end = 0, -+ }, -+ [4] = { -+ .start = 0, -+ .end = 0, -+ }, -+}; -+ -+struct platform_device gta01_button_dev = { -+ .name = "neo1973-button", -+ .num_resources = ARRAY_SIZE(gta01_button_resources), -+ .resource = gta01_button_resources, -+}; -+ -+static struct platform_device gta01_pm_gsm_dev = { -+ .name = "neo1973-pm-gsm", -+}; -+ -+/* USB */ -+static struct s3c2410_hcd_info gta01_usb_info = { -+ .port[0] = { -+ .flags = S3C_HCDFLG_USED, -+ }, -+ .port[1] = { -+ .flags = 0, -+ }, -+}; -+ -+static void __init gta01_map_io(void) -+{ -+ s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc)); -+ s3c24xx_init_clocks(12*1000*1000); -+ s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs)); -+} -+ -+static irqreturn_t gta01_modem_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "GSM wakeup interrupt (IRQ %d)\n", irq); -+ gta_gsm_interrupts++; -+ return IRQ_HANDLED; -+} -+ -+static void __init gta01_machine_init(void) -+{ -+ int rc; -+ -+ if (system_rev == GTA01v4_SYSTEM_REV || -+ system_rev == GTA01Bv2_SYSTEM_REV || -+ system_rev == GTA01Bv3_SYSTEM_REV || -+ system_rev == GTA01Bv4_SYSTEM_REV) { -+ gta01_udc_cfg.udc_command = gta01_udc_command; -+ gta01_mmc_cfg.ocr_avail = MMC_VDD_32_33; -+ } -+ -+ s3c_device_usb.dev.platform_data = >a01_usb_info; -+ s3c_device_nand.dev.platform_data = >a01_nand_info; -+ s3c_device_sdi.dev.platform_data = >a01_mmc_cfg; -+ -+ s3c24xx_fb_set_platdata(>a01_lcd_cfg); -+ -+ INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw); -+ s3c24xx_udc_set_platdata(>a01_udc_cfg); -+ s3c_i2c0_set_platdata(NULL); -+ set_s3c2410ts_info(>a01_ts_cfg); -+ -+ /* Set LCD_RESET / XRES to high */ -+ s3c2410_gpio_cfgpin(S3C2410_GPC6, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPC6, 1); -+ -+ /* SPI chip select is gpio output */ -+ s3c2410_gpio_cfgpin(S3C2410_GPG3, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPG3, 1); -+ platform_device_register(&s3c_device_spi_lcm); -+ -+ platform_device_register(>a01_bl_dev); -+ platform_device_register(>a01_button_dev); -+ platform_device_register(>a01_pm_gsm_dev); -+ -+ switch (system_rev) { -+ case GTA01v3_SYSTEM_REV: -+ case GTA01v4_SYSTEM_REV: -+ /* just use the default (GTA01_IRQ_PCF50606) */ -+ break; -+ case GTA01Bv2_SYSTEM_REV: -+ case GTA01Bv3_SYSTEM_REV: -+ /* just use the default (GTA01_IRQ_PCF50606) */ -+ gta01_led_resources[0].start = -+ gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON; -+ break; -+ case GTA01Bv4_SYSTEM_REV: -+ gta01_pmu_resources[0].start = -+ gta01_pmu_resources[0].end = GTA01Bv4_IRQ_PCF50606; -+ gta01_led_resources[0].start = -+ gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON; -+ break; -+ } -+ mangle_pmu_pdata_by_system_rev(); -+ platform_device_register(>a01_pmu_dev); -+ platform_device_register(>a01_led_dev); -+ -+ platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices)); -+ -+ s3c2410_pm_init(); -+ -+ set_irq_type(GTA01_IRQ_MODEM, IRQ_TYPE_EDGE_RISING); -+ rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED, -+ "modem", NULL); -+ enable_irq_wake(GTA01_IRQ_MODEM); -+ printk(KERN_DEBUG "Enabled GSM wakeup IRQ %d (rc=%d)\n", -+ GTA01_IRQ_MODEM, rc); -+} -+ -+MACHINE_START(NEO1973_GTA01, "GTA01") -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ .map_io = gta01_map_io, -+ .init_irq = s3c24xx_init_irq, -+ .init_machine = gta01_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-h1940.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-h1940.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-h1940.c 2009-01-02 00:01:56.000000000 +0100 -@@ -38,11 +38,13 @@ - #include - #include - #include --#include -+#include -+#include - - #include - #include - #include -+#include - #include - - static struct map_desc h1940_iodesc[] __initdata = { -@@ -129,6 +131,11 @@ static struct s3c2410_udc_mach_info h194 - .vbus_pin_inverted = 1, - }; - -+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { -+ .delay = 10000, -+ .presc = 49, -+ .oversampling_shift = 2, -+}; - - /** - * Set lcd on or off -@@ -183,9 +190,10 @@ static struct platform_device *h1940_dev - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, -+ &s3c_device_ts, - &s3c_device_leds, - &s3c_device_bluetooth, - }; -@@ -201,7 +209,7 @@ static void __init h1940_map_io(void) - #ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); - #endif -- s3c2410_pm_init(); -+ s3c_pm_init(); - } - - static void __init h1940_init_irq(void) -@@ -214,7 +222,9 @@ static void __init h1940_init(void) - u32 tmp; - - s3c24xx_fb_set_platdata(&h1940_fb_info); -+ set_s3c2410ts_info(&h1940_ts_cfg); - s3c24xx_udc_set_platdata(&h1940_udc_cfg); -+ s3c_i2c0_set_platdata(NULL); - - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ -@@ -223,10 +233,9 @@ static void __init h1940_init(void) - S3C2410_MISCCR_USBSUSPND0 | - S3C2410_MISCCR_USBSUSPND1, 0x0); - -- tmp = ( -- 0x78 << S3C2410_PLLCON_MDIVSHIFT) -- | (0x02 << S3C2410_PLLCON_PDIVSHIFT) -- | (0x03 << S3C2410_PLLCON_SDIVSHIFT); -+ tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) -+ | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) -+ | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); - writel(tmp, S3C2410_UPLLCON); - - platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-n30.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-n30.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-n30.c 2009-01-02 00:01:56.000000000 +0100 -@@ -40,14 +40,14 @@ - #include - #include - --#include -+#include - #include - - #include - #include - #include - #include --#include -+#include - - static struct map_desc n30_iodesc[] __initdata = { - /* nothing here yet */ -@@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb - static struct platform_device *n30_devices[] __initdata = { - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usb, - &s3c_device_usbgadget, -@@ -332,7 +332,7 @@ static struct platform_device *n30_devic - static struct platform_device *n35_devices[] __initdata = { - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, - &n35_button_device, -@@ -501,7 +501,7 @@ static void __init n30_init_irq(void) - static void __init n30_init(void) - { - s3c24xx_fb_set_platdata(&n30_fb_info); -- s3c_device_i2c.dev.platform_data = &n30_i2ccfg; -+ s3c_device_i2c0.dev.platform_data = &n30_i2ccfg; - s3c24xx_udc_set_platdata(&n30_udc_cfg); - - /* Turn off suspend on both USB ports, and switch the -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-otom.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-otom.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-otom.c 2009-01-02 00:01:56.000000000 +0100 -@@ -35,6 +35,7 @@ - #include - #include - #include -+#include - #include - - static struct map_desc otom11_iodesc[] __initdata = { -@@ -94,7 +95,7 @@ static struct platform_device *otom11_de - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &otom_device_nor, -@@ -109,6 +110,7 @@ static void __init otom11_map_io(void) - - static void __init otom11_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-qt2410.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-qt2410.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-qt2410.c 2009-01-02 00:01:56.000000000 +0100 -@@ -1,6 +1,6 @@ - /* linux/arch/arm/mach-s3c2410/mach-qt2410.c - * -- * Copyright (C) 2006 by OpenMoko, Inc. -+ * Copyright (C) 2006 by Openmoko, Inc. - * Author: Harald Welte - * All rights reserved. - * -@@ -50,10 +50,11 @@ - #include - #include - #include --#include --#include -+#include -+#include - #include - #include -+#include - - #include - #include -@@ -213,7 +214,7 @@ static struct platform_device qt2410_led - - /* SPI */ - --static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) - { - switch (cs) { - case BITBANG_CS_ACTIVE: -@@ -247,7 +248,7 @@ static struct platform_device *qt2410_de - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_sdi, - &s3c_device_usbgadget, -@@ -320,6 +321,24 @@ static int __init qt2410_tft_setup(char - - __setup("tft=", qt2410_tft_setup); - -+static struct resource qt2410_button_resources[] = { -+ [0] = { -+ .start = S3C2410_GPF0, -+ .end = S3C2410_GPF0, -+ }, -+ [1] = { -+ .start = S3C2410_GPF2, -+ .end = S3C2410_GPF2, -+ }, -+}; -+ -+struct platform_device qt2410_button_dev = { -+ .name ="qt2410-button", -+ .num_resources = ARRAY_SIZE(qt2410_button_resources), -+ .resource = qt2410_button_resources, -+}; -+ -+ - static void __init qt2410_map_io(void) - { - s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); -@@ -349,11 +368,12 @@ static void __init qt2410_machine_init(v - s3c2410_gpio_setpin(S3C2410_GPB0, 1); - - s3c24xx_udc_set_platdata(&qt2410_udc_cfg); -+ s3c_i2c0_set_platdata(NULL); - - s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); - - platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); -- s3c2410_pm_init(); -+ s3c_pm_init(); - } - - MACHINE_START(QT2410, "QT2410") -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-smdk2410.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-smdk2410.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-smdk2410.c 2009-01-02 00:01:56.000000000 +0100 -@@ -47,6 +47,7 @@ - #include - - #include -+#include - - #include - #include -@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_ - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - }; - -@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void) - - static void __init smdk2410_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); - smdk_machine_init(); - } -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-tct_hammer.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-tct_hammer.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-tct_hammer.c 2009-01-02 00:01:56.000000000 +0100 -@@ -45,6 +45,7 @@ - #include - - #include -+#include - #include - #include - -@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer - static struct platform_device *tct_hammer_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_usb, - &s3c_device_rtc, - &s3c_device_usbgadget, -@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(voi - - static void __init tct_hammer_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2410/mach-vr1000.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/mach-vr1000.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/mach-vr1000.c 2009-01-02 00:01:56.000000000 +0100 -@@ -47,6 +47,7 @@ - #include - #include - #include -+#include - - #include "usb-simtec.h" - #include "nor-simtec.h" -@@ -334,7 +335,7 @@ static struct platform_device *vr1000_de - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_adc, - &serial_device, - &vr1000_dm9k0, -@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void) - - static void __init vr1000_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); - - i2c_register_board_info(0, vr1000_i2c_devs, -Index: linux-2.6.28/arch/arm/mach-s3c2410/Makefile -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/Makefile 2009-01-02 00:01:56.000000000 +0100 -@@ -15,7 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o - obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o - obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o - obj-$(CONFIG_S3C2410_GPIO) += gpio.o --obj-$(CONFIG_S3C2410_CLOCK) += clock.o -+#obj-$(CONFIG_S3C2410_CLOCK) += clock.o -+obj-$(CONFIG_S3C2410_PWM) += pwm.o - - # Machine support - -@@ -38,3 +39,5 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o - # machine additions - - obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o -+obj-$(CONFIG_MACH_NEO1973_GTA01)+= mach-gta01.o -+ -Index: linux-2.6.28/arch/arm/mach-s3c2410/pm.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/pm.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/pm.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,21 +37,14 @@ - #include - #include - --#ifdef CONFIG_S3C2410_PM_DEBUG --extern void pm_dbg(const char *fmt, ...); --#define DBG(fmt...) pm_dbg(fmt) --#else --#define DBG(fmt...) printk(KERN_DEBUG fmt) --#endif -- - static void s3c2410_pm_prepare(void) - { - /* ensure at least GSTATUS3 has the resume address */ - -- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); -+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3); - -- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); -- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); -+ S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); -+ S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - - if (machine_is_h1940()) { - void *base = phys_to_virt(H1940_SUSPEND_CHECK); -Index: linux-2.6.28/arch/arm/mach-s3c2410/pwm.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2410/pwm.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,288 @@ -+/* -+ * arch/arm/mach-s3c2410/3c2410-pwm.c -+ * -+ * Copyright (c) by Javi Roman -+ * for the Openmoko Project. -+ * -+ * S3C2410A SoC PWM support -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+ static unsigned long standby_reg_tcon; -+ static unsigned long standby_reg_tcfg0; -+ static unsigned long standby_reg_tcfg1; -+#endif -+ -+int s3c2410_pwm_disable(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ /* stop timer */ -+ tcon = __raw_readl(S3C2410_TCON); -+ tcon &= 0xffffff00; -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ clk_disable(pwm->pclk); -+ clk_put(pwm->pclk); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_disable); -+ -+int s3c2410_pwm_init(struct s3c2410_pwm *pwm) -+{ -+ pwm->pclk = clk_get(NULL, "timers"); -+ if (IS_ERR(pwm->pclk)) -+ return PTR_ERR(pwm->pclk); -+ -+ clk_enable(pwm->pclk); -+ pwm->pclk_rate = clk_get_rate(pwm->pclk); -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_init); -+ -+int s3c2410_pwm_enable(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcfg0, tcfg1, tcnt, tcmp; -+ -+ /* control registers bits */ -+ tcfg1 = __raw_readl(S3C2410_TCFG1); -+ tcfg0 = __raw_readl(S3C2410_TCFG0); -+ -+ /* divider & scaler slection */ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; -+ break; -+ case PWM1: -+ tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; -+ break; -+ case PWM2: -+ tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; -+ break; -+ case PWM3: -+ tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK; -+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ break; -+ default: -+ clk_disable(pwm->pclk); -+ clk_put(pwm->pclk); -+ return -1; -+ } -+ -+ /* divider & scaler values */ -+ tcfg1 |= pwm->divider; -+ __raw_writel(tcfg1, S3C2410_TCFG1); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ case PWM1: -+ tcfg0 |= pwm->prescaler; -+ __raw_writel(tcfg0, S3C2410_TCFG0); -+ break; -+ default: -+ if ((tcfg0 | pwm->prescaler) != tcfg0) { -+ printk(KERN_WARNING "not changing prescaler of PWM %u," -+ " since it's shared with timer4 (clock tick)\n", -+ pwm->timerid); -+ } -+ break; -+ } -+ -+ /* timer count and compare buffer initial values */ -+ tcnt = pwm->counter; -+ tcmp = pwm->comparer; -+ -+ __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid)); -+ __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid)); -+ -+ /* ensure timer is stopped */ -+ s3c2410_pwm_stop(pwm); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_enable); -+ -+int s3c2410_pwm_start(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ tcon = __raw_readl(S3C2410_TCON); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcon |= S3C2410_TCON_T0START; -+ tcon &= ~S3C2410_TCON_T0MANUALUPD; -+ break; -+ case PWM1: -+ tcon |= S3C2410_TCON_T1START; -+ tcon &= ~S3C2410_TCON_T1MANUALUPD; -+ break; -+ case PWM2: -+ tcon |= S3C2410_TCON_T2START; -+ tcon &= ~S3C2410_TCON_T2MANUALUPD; -+ break; -+ case PWM3: -+ tcon |= S3C2410_TCON_T3START; -+ tcon &= ~S3C2410_TCON_T3MANUALUPD; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ default: -+ return -ENODEV; -+ } -+ -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_start); -+ -+int s3c2410_pwm_stop(struct s3c2410_pwm *pwm) -+{ -+ unsigned long tcon; -+ -+ tcon = __raw_readl(S3C2410_TCON); -+ -+ switch (pwm->timerid) { -+ case PWM0: -+ tcon &= ~0x00000000; -+ tcon |= S3C2410_TCON_T0RELOAD; -+ tcon |= S3C2410_TCON_T0MANUALUPD; -+ break; -+ case PWM1: -+ tcon &= ~0x00000080; -+ tcon |= S3C2410_TCON_T1RELOAD; -+ tcon |= S3C2410_TCON_T1MANUALUPD; -+ break; -+ case PWM2: -+ tcon &= ~0x00000800; -+ tcon |= S3C2410_TCON_T2RELOAD; -+ tcon |= S3C2410_TCON_T2MANUALUPD; -+ break; -+ case PWM3: -+ tcon &= ~0x00008000; -+ tcon |= S3C2410_TCON_T3RELOAD; -+ tcon |= S3C2410_TCON_T3MANUALUPD; -+ break; -+ case PWM4: -+ /* timer four is not capable of doing PWM */ -+ default: -+ return -ENODEV; -+ } -+ -+ __raw_writel(tcon, S3C2410_TCON); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_stop); -+ -+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm) -+{ -+ __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid)); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle); -+ -+int s3c2410_pwm_dumpregs(void) -+{ -+ printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n", -+ (unsigned long) __raw_readl(S3C2410_TCON), -+ (unsigned long) __raw_readl(S3C2410_TCFG0), -+ (unsigned long) __raw_readl(S3C2410_TCFG1)); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs); -+ -+static int __init s3c24xx_pwm_probe(struct platform_device *pdev) -+{ -+ struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data; -+ -+ dev_info(&pdev->dev, "s3c24xx_pwm is registered \n"); -+ -+ /* if platform was interested, give him a chance to register -+ * platform devices that switch power with us as the parent -+ * at registration time -- ensures suspend / resume ordering -+ */ -+ if (pdata) -+ if (pdata->attach_child_devices) -+ (pdata->attach_child_devices)(&pdev->dev); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* PWM config should be kept in suspending */ -+ standby_reg_tcon = __raw_readl(S3C2410_TCON); -+ standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0); -+ standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1); -+ -+ return 0; -+} -+ -+static int s3c24xx_pwm_resume(struct platform_device *pdev) -+{ -+ __raw_writel(standby_reg_tcon, S3C2410_TCON); -+ __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0); -+ __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1); -+ -+ return 0; -+} -+#else -+#define sc32440_pwm_suspend NULL -+#define sc32440_pwm_resume NULL -+#endif -+ -+static struct platform_driver s3c24xx_pwm_driver = { -+ .driver = { -+ .name = "s3c24xx_pwm", -+ .owner = THIS_MODULE, -+ }, -+ .probe = s3c24xx_pwm_probe, -+ .suspend = s3c24xx_pwm_suspend, -+ .resume = s3c24xx_pwm_resume, -+}; -+ -+static int __init s3c24xx_pwm_init(void) -+{ -+ return platform_driver_register(&s3c24xx_pwm_driver); -+} -+ -+static void __exit s3c24xx_pwm_exit(void) -+{ -+} -+ -+MODULE_AUTHOR("Javi Roman "); -+MODULE_LICENSE("GPL"); -+ -+module_init(s3c24xx_pwm_init); -+module_exit(s3c24xx_pwm_exit); -Index: linux-2.6.28/arch/arm/mach-s3c2410/s3c2410.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2410/s3c2410.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2410/s3c2410.c 2009-01-02 00:01:56.000000000 +0100 -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -28,6 +29,8 @@ - #include - #include - -+#include -+ - #include - #include - -@@ -35,6 +38,7 @@ - #include - #include - #include -+#include - - /* Initial IO mappings */ - -@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3 - * machine specific initialisation. - */ - --void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size) -+void __init s3c2410_map_io(void) - { -- /* register our io-tables */ -- - iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); -- iotable_init(mach_desc, mach_size); - } - --void __init s3c2410_init_clocks(int xtal) -+void __init_or_cpufreq s3c2410_setup_clocks(void) - { -+ struct clk *xtal_clk; - unsigned long tmp; -+ unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - -+ xtal_clk = clk_get(NULL, "xtal"); -+ xtal = clk_get_rate(xtal_clk); -+ clk_put(xtal_clk); -+ - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - -- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); -+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - -@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal - * console to use them - */ - -- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); -+ s3c24xx_setup_clocks(fclk, hclk, pclk); -+} -+ -+void __init s3c2410_init_clocks(int xtal) -+{ -+ s3c24xx_register_baseclocks(xtal); -+ s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2412/clock.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/clock.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/clock.c 2009-01-02 00:01:56.000000000 +0100 -@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct cl - - /* clock selections */ - --/* CPU EXTCLK input */ --static struct clk clk_ext = { -- .name = "extclk", -- .id = -1, --}; -- - static struct clk clk_erefclk = { - .name = "erefclk", - .id = -1, -@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void) - s3c2412_clkcon_enable(clkp, 0); - } - -+ s3c_pwmclk_init(); - return 0; - } -Index: linux-2.6.28/arch/arm/mach-s3c2412/dma.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/dma.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/dma.c 2009-01-02 00:01:56.000000000 +0100 -@@ -26,13 +26,13 @@ - - #include - #include --#include -+#include - #include - #include - #include - #include - #include --#include -+#include - - #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } - -Index: linux-2.6.28/arch/arm/mach-s3c2412/mach-jive.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/mach-jive.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/mach-jive.c 2009-01-02 00:01:56.000000000 +0100 -@@ -31,8 +31,8 @@ - #include - - #include --#include --#include -+#include -+#include - - #include - #include -@@ -52,7 +52,8 @@ - #include - #include - #include --#include -+#include -+#include - - static struct map_desc jive_iodesc[] __initdata = { - }; -@@ -450,14 +451,14 @@ static struct spi_board_info __initdata - - /* I2C bus and device configuration. */ - --static struct s3c2410_platform_i2c jive_i2c_cfg = { -+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = { - .max_freq = 80 * 1000, - .bus_freq = 50 * 1000, - .flags = S3C_IICFLG_FILTER, - .sda_delay = 2, - }; - --static struct i2c_board_info jive_i2c_devs[] = { -+static struct i2c_board_info jive_i2c_devs[] __initdata = { - [0] = { - I2C_BOARD_INFO("lis302dl", 0x1c), - .irq = IRQ_EINT14, -@@ -470,7 +471,7 @@ static struct platform_device *jive_devi - &s3c_device_usb, - &s3c_device_rtc, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_lcd, - &jive_device_lcdspi, - &jive_device_wm8750, -@@ -492,7 +493,7 @@ static int jive_pm_suspend(struct sys_de - * correct address to resume from. */ - - __raw_writel(0x2BED, S3C2412_INFORM0); -- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1); -+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); - - return 0; - } -@@ -628,7 +629,7 @@ static void __init jive_machine_init(voi - - /* initialise the power management now we've setup everything. */ - -- s3c2410_pm_init(); -+ s3c_pm_init(); - - s3c_device_nand.dev.platform_data = &jive_nand_info; - -@@ -663,7 +664,7 @@ static void __init jive_machine_init(voi - - spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); - -- s3c_device_i2c.dev.platform_data = &jive_i2c_cfg; -+ s3c_i2c0_set_platdata(&jive_i2c_cfg); - i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs)); - - pm_power_off = jive_power_off; -Index: linux-2.6.28/arch/arm/mach-s3c2412/mach-smdk2413.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/mach-smdk2413.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/mach-smdk2413.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,7 +37,8 @@ - #include - - #include --#include -+#include -+#include - #include - - #include -@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_ - &s3c_device_usb, - //&s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_usbgadget, - }; -@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init - - - s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); -+ s3c_i2c0_set_platdata(NULL); - - platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); - smdk_machine_init(); -Index: linux-2.6.28/arch/arm/mach-s3c2412/mach-vstms.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/mach-vstms.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/mach-vstms.c 2009-01-02 00:01:56.000000000 +0100 -@@ -39,7 +39,8 @@ - #include - #include - --#include -+#include -+#include - - #include - #include -@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstm - static struct platform_device *vstms_devices[] __initdata = { - &s3c_device_usb, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_nand, -@@ -151,6 +152,7 @@ static void __init vstms_map_io(void) - - static void __init vstms_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2412/pm.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/pm.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/pm.c 2009-01-02 00:01:56.000000000 +0100 -@@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] - - static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) - { -- s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); -+ s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; - } - -@@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_ - tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; - __raw_writel(tmp, S3C2412_PWRCFG); - -- s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); -+ s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; - } - -Index: linux-2.6.28/arch/arm/mach-s3c2412/s3c2412.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2412/s3c2412.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2412/s3c2412.c 2009-01-02 00:01:56.000000000 +0100 -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -33,13 +34,15 @@ - #include - #include - -+#include -+ - #include - #include - #include - #include - #include - #include --#include -+#include - #include - - #include -@@ -47,6 +50,7 @@ - #include - #include - #include -+#include - - #ifndef CONFIG_CPU_S3C2412_ONLY - void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; -@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void) - * machine specific initialisation. - */ - --void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) -+void __init s3c2412_map_io(void) - { - /* move base of IO */ - -@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_de - /* register our io-tables */ - - iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); -- iotable_init(mach_desc, mach_size); - } - --void __init s3c2412_init_clocks(int xtal) -+void __init_or_cpufreq s3c2412_setup_clocks(void) - { -+ struct clk *xtal_clk; - unsigned long tmp; -+ unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - -+ xtal_clk = clk_get(NULL, "xtal"); -+ xtal = clk_get_rate(xtal_clk); -+ clk_put(xtal_clk); -+ - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - -- fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); -+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - -@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - -+ s3c24xx_setup_clocks(fclk, hclk, pclk); -+} -+ -+void __init s3c2412_init_clocks(int xtal) -+{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - -- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); -+ s3c24xx_register_baseclocks(xtal); -+ s3c2412_setup_clocks(); - s3c2412_baseclk_add(); - } - -@@ -216,5 +231,8 @@ int __init s3c2412_init(void) - { - printk("S3C2412: Initialising architecture\n"); - -+ /* make sure SD/MMC driver can distinguish 2412 from 2410 */ -+ s3c_device_sdi.name = "s3c2412-sdi"; -+ - return sysdev_register(&s3c2412_sysdev); - } -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/bits.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/bits.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (C) Samsung Electroincs 2003 -+ * Author: SW.LEE -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#ifndef __SW_BITS_H -+#define __SW_BITS_H -+ -+#define BIT0 0x00000001 -+#define BIT1 0x00000002 -+#define BIT2 0x00000004 -+#define BIT3 0x00000008 -+#define BIT4 0x00000010 -+#define BIT5 0x00000020 -+#define BIT6 0x00000040 -+#define BIT7 0x00000080 -+#define BIT8 0x00000100 -+#define BIT9 0x00000200 -+#define BIT10 0x00000400 -+#define BIT11 0x00000800 -+#define BIT12 0x00001000 -+#define BIT13 0x00002000 -+#define BIT14 0x00004000 -+#define BIT15 0x00008000 -+#define BIT16 0x00010000 -+#define BIT17 0x00020000 -+#define BIT18 0x00040000 -+#define BIT19 0x00080000 -+#define BIT20 0x00100000 -+#define BIT21 0x00200000 -+#define BIT22 0x00400000 -+#define BIT23 0x00800000 -+#define BIT24 0x01000000 -+#define BIT25 0x02000000 -+#define BIT26 0x04000000 -+#define BIT27 0x08000000 -+#define BIT28 0x10000000 -+#define BIT29 0x20000000 -+#define BIT30 0x40000000 -+#define BIT31 0x80000000 -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/camif.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/camif.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,1047 @@ -+/* -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+#include -+#include -+#else -+#include -+#include -+#include -+#endif -+ -+#include "cam_reg.h" -+//#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+ -+static int camif_dma_burst(camif_cfg_t *); -+static int camif_scaler(camif_cfg_t *); -+ -+/* For SXGA Image */ -+#define RESERVE_MEM 15*1024*1024 -+#define YUV_MEM 10*1024*1024 -+#define RGB_MEM (RESERVE_MEM - YUV_MEM) -+ -+static int camif_malloc(camif_cfg_t *cfg) -+{ -+ unsigned int t_size; -+ unsigned int daon = cfg->target_x *cfg->target_y; -+ -+ if(cfg->dma_type & CAMIF_CODEC) { -+ if (cfg->fmt & CAMIF_OUT_YCBCR420) { -+ t_size = daon * 3 / 2 ; -+ } -+ else { t_size = daon * 2; /* CAMIF_OUT_YCBCR422 */ } -+ t_size = t_size *cfg->pp_num; -+ -+#ifndef SAMSUNG_SXGA_CAM -+ cfg->pp_virt_buf = dma_alloc_coherent(cfg->v->dev, -+ t_size, &cfg->pp_phys_buf, -+ GFP_KERNEL); -+#else -+ printk(KERN_INFO "Reserving High RAM Addresses \n"); -+ cfg->pp_phys_buf = PHYS_OFFSET + (MEM_SIZE - RESERVE_MEM); -+ cfg->pp_virt_buf = ioremap_nocache(cfg->pp_phys_buf, YUV_MEM); -+#endif -+ -+ if ( !cfg->pp_virt_buf ) { -+ printk(KERN_ERR"CAMERA:Failed to request YCBCR MEM\n"); -+ return -ENOMEM; -+ } -+ memset(cfg->pp_virt_buf, 0, t_size); -+ cfg->pp_totalsize = t_size; -+ return 0; -+ } -+ if ( cfg->dma_type & CAMIF_PREVIEW ) { -+ if (cfg->fmt & CAMIF_RGB16) -+ t_size = daon * 2; /* 4byte per two pixel*/ -+ else { -+ assert(cfg->fmt & CAMIF_RGB24); -+ t_size = daon * 4; /* 4byte per one pixel */ -+ } -+ t_size = t_size * cfg->pp_num; -+#ifndef SAMSUNG_SXGA_CAM -+ cfg->pp_virt_buf = dma_alloc_coherent(cfg->v->dev, -+ t_size, &cfg->pp_phys_buf, -+ GFP_KERNEL); -+#else -+ printk(KERN_INFO "Reserving High RAM Addresses \n"); -+ cfg->pp_phys_buf = PHYS_OFFSET + (MEM_SIZE - RESERVE_MEM ) + YUV_MEM; -+ cfg->pp_virt_buf = ioremap_nocache(cfg->pp_phys_buf,RGB_MEM); -+#endif -+ if ( !cfg->pp_virt_buf ) { -+ printk(KERN_ERR"CAMERA:Failed to request RGB MEM\n"); -+ return -ENOMEM; -+ } -+ memset(cfg->pp_virt_buf, 0, t_size); -+ cfg->pp_totalsize = t_size; -+ return 0; -+ } -+ -+ return 0; /* Never come. */ -+} -+ -+static int camif_demalloc(camif_cfg_t *cfg) -+{ -+#ifndef SAMSUNG_SXGA_CAM -+ if ( cfg->pp_virt_buf ) { -+ dma_free_coherent(cfg->v->dev, cfg->pp_totalsize, -+ cfg->pp_virt_buf, cfg->pp_phys_buf); -+ cfg->pp_virt_buf = 0; -+ } -+#else -+ iounmap(cfg->pp_virt_buf); -+ cfg->pp_virt_buf = 0; -+#endif -+ return 0; -+} -+ -+/* -+ * advise a person to use this func in ISR -+ * index value indicates the next frame count to be used -+ */ -+int camif_g_frame_num(camif_cfg_t *cfg) -+{ -+ int index = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ index = FRAME_CNT(readl(camregs + S3C2440_CAM_REG_CICOSTATUS)); -+ DPRINTK("CAMIF_CODEC frame %d \n", index); -+ } -+ else { -+ assert(cfg->dma_type & CAMIF_PREVIEW ); -+ index = FRAME_CNT(readl(camregs + S3C2440_CAM_REG_CIPRSTATUS)); -+ DPRINTK("CAMIF_PREVIEW frame %d 0x%08X \n", index, -+ readl(camregs + S3C2440_CAM_REG_CIPRSTATUS)); -+ } -+ cfg->now_frame_num = (index + 2) % 4; /* When 4 PingPong */ -+ return index; /* meaningless */ -+} -+ -+static int camif_pp_codec(camif_cfg_t *cfg) -+{ -+ u32 i, c_size; /* Cb,Cr size */ -+ u32 one_p_size; -+ u32 daon = cfg->target_x * cfg->target_y; -+ if (cfg->fmt & CAMIF_OUT_YCBCR420) -+ c_size = daon / 4; -+ else { -+ assert(cfg->fmt & CAMIF_OUT_YCBCR422); -+ c_size = daon / 2; -+ } -+ switch ( cfg->pp_num ) { -+ case 1 : -+ for (i =0 ; i < 4; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 2: -+#define TRY (( i%2 ) ? 1 :0) -+ one_p_size = daon + 2*c_size; -+ for (i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf + TRY * one_p_size; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf + TRY * one_p_size; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon + TRY * one_p_size; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon + TRY * one_p_size; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size + TRY * one_p_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size + TRY * one_p_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 4: -+ one_p_size = daon + 2*c_size; -+ for (i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_y = cfg->pp_virt_buf + i * one_p_size; -+ cfg->img_buf[i].phys_y = cfg->pp_phys_buf + i * one_p_size; -+ cfg->img_buf[i].virt_cb = cfg->pp_virt_buf + daon + i * one_p_size; -+ cfg->img_buf[i].phys_cb = cfg->pp_phys_buf + daon + i * one_p_size; -+ cfg->img_buf[i].virt_cr = cfg->pp_virt_buf + daon + c_size + i * one_p_size; -+ cfg->img_buf[i].phys_cr = cfg->pp_phys_buf + daon + c_size + i * one_p_size; -+ writel(cfg->img_buf[i].phys_y, camregs + S3C2440_CAM_REG_CICOYSA(i)); -+ writel(cfg->img_buf[i].phys_cb, camregs + S3C2440_CAM_REG_CICOCBSA(i)); -+ writel(cfg->img_buf[i].phys_cr, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ default: -+ printk("Invalid PingPong Number %d \n",cfg->pp_num); -+ panic("halt\n"); -+} -+ return 0; -+} -+ -+/* RGB Buffer Allocation */ -+static int camif_pp_preview(camif_cfg_t *cfg) -+{ -+ int i; -+ u32 daon = cfg->target_x * cfg->target_y; -+ -+ if(cfg->fmt & CAMIF_RGB24) -+ daon = daon * 4 ; -+ else { -+ assert (cfg->fmt & CAMIF_RGB16); -+ daon = daon *2; -+ } -+ switch ( cfg->pp_num ) { -+ case 1: -+ for ( i = 0; i < 4 ; i++ ) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf ; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf ; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 2: -+ for ( i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf + TRY * daon; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf + TRY * daon; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ case 4: -+ for ( i = 0; i < 4 ; i++) { -+ cfg->img_buf[i].virt_rgb = cfg->pp_virt_buf + i * daon; -+ cfg->img_buf[i].phys_rgb = cfg->pp_phys_buf + i * daon; -+ writel(cfg->img_buf[i].phys_rgb, camregs + S3C2440_CAM_REG_CICOCRSA(i)); -+ } -+ break; -+ default: -+ printk("Invalid PingPong Number %d \n",cfg->pp_num); -+ panic("halt\n"); -+ } -+ return 0; -+} -+ -+static int camif_pingpong(camif_cfg_t *cfg) -+{ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ camif_pp_codec(cfg); -+ } -+ -+ if ( cfg->dma_type & CAMIF_PREVIEW) { -+ camif_pp_preview(cfg); -+ } -+ return 0; -+} -+ -+ -+/*********** Image Convert *******************************/ -+/* Return Format -+ * Supported by Hardware -+ * V4L2_PIX_FMT_YUV420, -+ * V4L2_PIX_FMT_YUV422P, -+ * V4L2_PIX_FMT_BGR32 (BGR4) -+ * ----------------------------------- -+ * V4L2_PIX_FMT_RGB565(X) -+ * Currenly 2byte --> BGR656 Format -+ * S3C2440A,S3C24A0 supports vairants with reversed FMT_RGB565 -+ i.e blue toward the least, red towards the most significant bit -+ -- by SW.LEE -+ */ -+ -+ -+/* -+ * After calling camif_g_frame_num, -+ * this func must be called -+ */ -+u8 * camif_g_frame(camif_cfg_t *cfg) -+{ -+ u8 * ret = NULL; -+ int cnt = cfg->now_frame_num; -+ -+ if(cfg->dma_type & CAMIF_PREVIEW) { -+ ret = cfg->img_buf[cnt].virt_rgb; -+ } -+ if (cfg->dma_type & CAMIF_CODEC) { -+ ret = cfg->img_buf[cnt].virt_y; -+ } -+ return ret; -+} -+ -+/* This function must be called in module initial time */ -+static int camif_source_fmt(camif_gc_t *gc) -+{ -+ u32 cmd = 0; -+ -+ /* Configure CISRCFMT --Source Format */ -+ if (gc->itu_fmt & CAMIF_ITU601) { -+ cmd = CAMIF_ITU601; -+ } -+ else { -+ assert ( gc->itu_fmt & CAMIF_ITU656); -+ cmd = CAMIF_ITU656; -+ } -+ cmd |= SOURCE_HSIZE(gc->source_x)| SOURCE_VSIZE(gc->source_y); -+ /* Order422 */ -+ cmd |= gc->order422; -+ writel(cmd, camregs + S3C2440_CAM_REG_CISRCFMT); -+ -+ return 0 ; -+} -+ -+ -+/* -+ * Codec Input YCBCR422 will be Fixed -+ */ -+static int camif_target_fmt(camif_cfg_t *cfg) -+{ -+ u32 cmd = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ /* YCBCR setting */ -+ cmd = TARGET_HSIZE(cfg->target_x)| TARGET_VSIZE(cfg->target_y); -+ if ( cfg->fmt & CAMIF_OUT_YCBCR420 ) { -+ cmd |= OUT_YCBCR420|IN_YCBCR422; -+ } -+ else { -+ assert(cfg->fmt & CAMIF_OUT_YCBCR422); -+ cmd |= OUT_YCBCR422|IN_YCBCR422; -+ } -+ writel(cmd | cfg->flip, camregs + S3C2440_CAM_REG_CICOTRGFMT); -+ -+ } else { -+ assert(cfg->dma_type & CAMIF_PREVIEW); -+ writel(TARGET_HSIZE(cfg->target_x)|TARGET_VSIZE(cfg->target_y)|cfg->flip, -+ camregs + S3C2440_CAM_REG_CIPRTRGFMT); -+ } -+ return 0; -+} -+ -+void camif_change_flip(camif_cfg_t *cfg) -+{ -+ u32 cmd = readl(camregs + S3C2440_CAM_REG_CICOTRGFMT); -+ -+ cmd &= ~(BIT14|BIT15); -+ cmd |= cfg->flip; -+ -+ writel(cmd, camregs + S3C2440_CAM_REG_CICOTRGFMT); -+} -+ -+ -+ -+/* Must: -+ * Before calling this function, -+ * you must use "camif_dynamic_open" -+ * If you want to enable both CODEC and preview -+ * you must do it at the same time. -+ */ -+int camif_capture_start(camif_cfg_t *cfg) -+{ -+ u32 n_cmd = 0; /* Next Command */ -+ -+ switch(cfg->exec) { -+ case CAMIF_BOTH_DMA_ON: -+ camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = CAMIF_CAP_PREVIEW_ON | CAMIF_CAP_CODEC_ON; -+ break; -+ case CAMIF_DMA_ON: -+ camif_reset(CAMIF_RESET, 0); /* Flush Camera Core Buffer */ -+ if (cfg->dma_type&CAMIF_CODEC) { -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = CAMIF_CAP_CODEC_ON; -+ } else { -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) | -+ SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ n_cmd = CAMIF_CAP_PREVIEW_ON; -+ } -+ -+ /* wait until Sync Time expires */ -+ /* First settting, to wait VSYNC fall */ -+ /* By VESA spec,in 640x480 @60Hz -+ MAX Delay Time is around 64us which "while" has.*/ -+ while(VSYNC & readl(camregs + S3C2440_CAM_REG_CICOSTATUS)); -+ break; -+ default: -+ break; -+} -+ writel(n_cmd | CAMIF_CAP_ON, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ return 0; -+} -+ -+ -+int camif_capture_stop(camif_cfg_t *cfg) -+{ -+ u32 n_cmd = readl(camregs + S3C2440_CAM_REG_CIIMGCPT); /* Next Command */ -+ -+ switch(cfg->exec) { -+ case CAMIF_BOTH_DMA_OFF: -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd = 0; -+ break; -+ case CAMIF_DMA_OFF_L_IRQ: /* fall thru */ -+ case CAMIF_DMA_OFF: -+ if (cfg->dma_type&CAMIF_CODEC) { -+ writel(readl(camregs + S3C2440_CAM_REG_CICOSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ n_cmd &= ~CAMIF_CAP_CODEC_ON; -+ if (!(n_cmd & CAMIF_CAP_PREVIEW_ON)) -+ n_cmd = 0; -+ } else { -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRSCCTRL) & -+ ~SCALERSTART, camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ n_cmd &= ~CAMIF_CAP_PREVIEW_ON; -+ if (!(n_cmd & CAMIF_CAP_CODEC_ON)) -+ n_cmd = 0; -+ } -+ break; -+ default: -+ panic("Unexpected \n"); -+ } -+ writel(n_cmd, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ if (cfg->exec == CAMIF_DMA_OFF_L_IRQ) { /* Last IRQ */ -+ if (cfg->dma_type & CAMIF_CODEC) -+ writel(readl(camregs + S3C2440_CAM_REG_CICOCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CICOCTRL); -+ else -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CIPRCTRL); -+ } -+#if 0 -+ else { /* to make internal state machine of CAMERA stop */ -+ camif_reset(CAMIF_RESET, 0); -+ } -+#endif -+ return 0; -+} -+ -+ -+/* LastIRQEn is autoclear */ -+void camif_last_irq_en(camif_cfg_t *cfg) -+{ -+ if ((cfg->exec == CAMIF_BOTH_DMA_ON) || (cfg->dma_type & CAMIF_CODEC)) -+ writel(readl(camregs + S3C2440_CAM_REG_CICOCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CICOCTRL); -+ -+ if ((cfg->exec == CAMIF_BOTH_DMA_ON) || !(cfg->dma_type & CAMIF_CODEC)) -+ writel(readl(camregs + S3C2440_CAM_REG_CIPRCTRL) | -+ LAST_IRQ_EN, camregs + S3C2440_CAM_REG_CIPRCTRL); -+} -+ -+static int -+camif_scaler_internal(u32 srcWidth, u32 dstWidth, u32 *ratio, u32 *shift) -+{ -+ if(srcWidth>=64*dstWidth){ -+ printk(KERN_ERR"CAMERA:out of prescaler range: srcWidth /dstWidth = %d(< 64)\n", -+ srcWidth/dstWidth); -+ return 1; -+ } -+ else if(srcWidth>=32*dstWidth){ -+ *ratio=32; -+ *shift=5; -+ } -+ else if(srcWidth>=16*dstWidth){ -+ *ratio=16; -+ *shift=4; -+ } -+ else if(srcWidth>=8*dstWidth){ -+ *ratio=8; -+ *shift=3; -+ } -+ else if(srcWidth>=4*dstWidth){ -+ *ratio=4; -+ *shift=2; -+ } -+ else if(srcWidth>=2*dstWidth){ -+ *ratio=2; -+ *shift=1; -+ } -+ else { -+ *ratio=1; -+ *shift=0; -+ } -+ return 0; -+} -+ -+ -+int camif_g_fifo_status(camif_cfg_t *cfg) -+{ -+ u32 reg; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ u32 flag = CO_OVERFLOW_Y | CO_OVERFLOW_CB | CO_OVERFLOW_CR; -+ reg = readl(camregs + S3C2440_CAM_REG_CICOSTATUS); -+ if (reg & flag) { -+ printk("CODEC: FIFO error(0x%08x) and corrected\n",reg); -+ /* FIFO Error Count ++ */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) | -+ CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) & -+ ~(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR), -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 1; /* Error */ -+ } -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ u32 flag = PR_OVERFLOW_CB | PR_OVERFLOW_CR; -+ reg = readl(camregs + S3C2440_CAM_REG_CIPRSTATUS); -+ if (reg & flag) { -+ printk("PREVIEW:FIFO error(0x%08x) and corrected\n",reg); -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) | -+ CO_FIFO_CB | CO_FIFO_CR, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ writel(readl(camregs + S3C2440_CAM_REG_CIWDOFST) & -+ ~(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR), -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ /* FIFO Error Count ++ */ -+ return 1; /* Error */ -+ } -+ } -+ return 0; /* No Error */ -+} -+ -+ -+/* Policy: -+ * if codec or preview define the win offset, -+ * other must follow that value. -+ */ -+int camif_win_offset(camif_gc_t *gc ) -+{ -+ u32 h = gc->win_hor_ofst; -+ u32 v = gc->win_ver_ofst; -+ -+ /*Clear Overflow */ -+ writel(CO_FIFO_Y | CO_FIFO_CB | CO_FIFO_CR | PR_FIFO_CB | PR_FIFO_CB, -+ camregs + S3C2440_CAM_REG_CIWDOFST); -+ writel(0, camregs + S3C2440_CAM_REG_CIWDOFST); -+ -+ if (!h && !v) { -+ writel(0, camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 0; -+ } -+ -+ writel(WINOFEN | WINHOROFST(h) | WINVEROFST(v), camregs + S3C2440_CAM_REG_CIWDOFST); -+ return 0; -+} -+ -+/* -+ * when you change the resolution in a specific camera, -+ * sometimes, it is necessary to change the polarity -+ * -- SW.LEE -+ */ -+static void camif_polarity(camif_gc_t *gc) -+{ -+ u32 cmd = readl(camregs + S3C2440_CAM_REG_CIGCTRL);; -+ -+ cmd = cmd & ~(BIT26|BIT25|BIT24); /* clear polarity */ -+ if (gc->polarity_pclk) -+ cmd |= GC_INVPOLPCLK; -+ if (gc->polarity_vsync) -+ cmd |= GC_INVPOLVSYNC; -+ if (gc->polarity_href) -+ cmd |= GC_INVPOLHREF; -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ cmd, camregs + S3C2440_CAM_REG_CIGCTRL); -+} -+ -+ -+int camif_dynamic_open(camif_cfg_t *cfg) -+{ -+ camif_win_offset(cfg->gc); -+ camif_polarity(cfg->gc); -+ -+ if(camif_scaler(cfg)) { -+ printk(KERN_ERR "CAMERA:Preview Scaler, Change WinHorOfset or Target Size\n"); -+ return 1; -+ } -+ camif_target_fmt(cfg); -+ if (camif_dma_burst(cfg)) { -+ printk(KERN_ERR "CAMERA:DMA Busrt Length Error \n"); -+ return 1; -+ } -+ if(camif_malloc(cfg) ) { -+ printk(KERN_ERR " Instead of using consistent_alloc()\n" -+ " lease use dedicated memory allocation for DMA memory\n"); -+ return -1; -+ } -+ camif_pingpong(cfg); -+ return 0; -+} -+ -+int camif_dynamic_close(camif_cfg_t *cfg) -+{ -+ camif_demalloc(cfg); -+ return 0; -+} -+ -+static int camif_target_area(camif_cfg_t *cfg) -+{ -+ u32 rect = cfg->target_x * cfg->target_y; -+ -+ if (cfg->dma_type & CAMIF_CODEC) -+ writel(rect, camregs + S3C2440_CAM_REG_CICOTAREA); -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) -+ writel(rect, camregs + S3C2440_CAM_REG_CIPRTAREA); -+ -+ return 0; -+} -+ -+static int inline camif_hw_reg(camif_cfg_t *cfg) -+{ -+ u32 cmd = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ writel(PRE_SHIFT(cfg->sc.shfactor) | -+ PRE_HRATIO(cfg->sc.prehratio) | -+ PRE_VRATIO(cfg->sc.prevratio), -+ camregs + S3C2440_CAM_REG_CICOSCPRERATIO); -+ writel(PRE_DST_WIDTH(cfg->sc.predst_x) | -+ PRE_DST_HEIGHT(cfg->sc.predst_y), -+ camregs + S3C2440_CAM_REG_CICOSCPREDST); -+ -+ /* Differ from Preview */ -+ if (cfg->sc.scalerbypass) -+ cmd |= SCALERBYPASS; -+ if (cfg->sc.scaleup_h & cfg->sc.scaleup_v) -+ cmd |= BIT30|BIT29; -+ writel(cmd | MAIN_HRATIO(cfg->sc.mainhratio) | -+ MAIN_VRATIO(cfg->sc.mainvratio), -+ camregs + S3C2440_CAM_REG_CICOSCCTRL); -+ return 0; -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ writel(PRE_SHIFT(cfg->sc.shfactor) | -+ PRE_HRATIO(cfg->sc.prehratio) | -+ PRE_VRATIO(cfg->sc.prevratio), -+ camregs + S3C2440_CAM_REG_CIPRSCPRERATIO); -+ writel(PRE_DST_WIDTH(cfg->sc.predst_x) | -+ PRE_DST_HEIGHT(cfg->sc.predst_y), -+ camregs + S3C2440_CAM_REG_CIPRSCPREDST); -+ /* Differ from Codec */ -+ if (cfg->fmt & CAMIF_RGB24) -+ cmd |= RGB_FMT24; -+ if (cfg->sc.scaleup_h & cfg->sc.scaleup_v) -+ cmd |= BIT29 | BIT28; -+ writel(cmd | MAIN_HRATIO(cfg->sc.mainhratio) | S_METHOD | -+ MAIN_VRATIO(cfg->sc.mainvratio), -+ camregs + S3C2440_CAM_REG_CIPRSCCTRL); -+ return 0; -+ } -+ -+ panic("CAMERA:DMA_TYPE Wrong \n"); -+ return 0; -+} -+ -+ -+/* Configure Pre-scaler control & main scaler control register */ -+static int camif_scaler(camif_cfg_t *cfg) -+{ -+ int tx = cfg->target_x, ty = cfg->target_y; -+ int sx, sy; -+ -+ if (tx <= 0 || ty <= 0) -+ panic("CAMERA: Invalid target size \n"); -+ -+ sx = cfg->gc->source_x - 2 * cfg->gc->win_hor_ofst; -+ sy = cfg->gc->source_y - 2 * cfg->gc->win_ver_ofst; -+ if (sx <= 0 || sy <= 0) -+ panic("CAMERA: Invalid source size \n"); -+ -+ cfg->sc.modified_src_x = sx; -+ cfg->sc.modified_src_y = sy; -+ -+ /* Pre-scaler control register 1 */ -+ camif_scaler_internal(sx, tx, &cfg->sc.prehratio, &cfg->sc.hfactor); -+ camif_scaler_internal(sy, ty, &cfg->sc.prevratio, &cfg->sc.vfactor); -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) -+ if ((sx / cfg->sc.prehratio) > 640) { -+ printk(KERN_INFO "CAMERA: Internal Preview line " -+ "buffer is 640 pixels\n"); -+ return 1; /* Error */ -+ } -+ -+ cfg->sc.shfactor = 10 - (cfg->sc.hfactor + cfg->sc.vfactor); -+ /* Pre-scaler control register 2 */ -+ cfg->sc.predst_x = sx / cfg->sc.prehratio; -+ cfg->sc.predst_y = sy / cfg->sc.prevratio; -+ -+ /* Main-scaler control register */ -+ cfg->sc.mainhratio = (sx << 8) / (tx << cfg->sc.hfactor); -+ cfg->sc.mainvratio = (sy << 8) / (ty << cfg->sc.vfactor); -+ DPRINTK(" sx %d, sy %d tx %d ty %d \n", sx, sy, tx, ty); -+ DPRINTK(" hfactor %d vfactor %d \n",cfg->sc.hfactor, cfg->sc.vfactor); -+ -+ cfg->sc.scaleup_h = (sx <= tx) ? 1: 0; -+ cfg->sc.scaleup_v = (sy <= ty) ? 1: 0; -+ if (cfg->sc.scaleup_h != cfg->sc.scaleup_v) -+ printk(KERN_ERR "scaleup_h must be same to scaleup_v \n"); -+ -+ camif_hw_reg(cfg); -+ camif_target_area(cfg); -+ -+ return 0; -+} -+ -+/****************************************************** -+ CalculateBurstSize - Calculate the busrt lengths -+ Description: -+ - dstHSize: the number of the byte of H Size. -+********************************************************/ -+static void camif_g_bsize(u32 hsize, u32 *mburst, u32 *rburst) -+{ -+ u32 tmp; -+ -+ tmp = (hsize / 4) % 16; -+ switch(tmp) { -+ case 0: -+ *mburst=16; -+ *rburst=16; -+ break; -+ case 4: -+ *mburst=16; -+ *rburst=4; -+ break; -+ case 8: -+ *mburst=16; -+ *rburst=8; -+ break; -+ default: -+ tmp=(hsize / 4) % 8; -+ switch(tmp) { -+ case 0: -+ *mburst = 8; -+ *rburst = 8; -+ break; -+ case 4: -+ *mburst = 8; -+ *rburst = 4; -+ default: -+ *mburst = 4; -+ tmp = (hsize / 4) % 4; -+ *rburst= (tmp) ? tmp: 4; -+ break; -+ } -+ break; -+ } -+} -+ -+/* SXGA 1028x1024*/ -+/* XGA 1024x768 */ -+/* SVGA 800x600 */ -+/* VGA 640x480 */ -+/* CIF 352x288 */ -+/* QVGA 320x240 */ -+/* QCIF 176x144 */ -+/* ret val -+ 1 : DMA Size Error -+*/ -+#define BURST_ERR 1 -+static int camif_dma_burst(camif_cfg_t *cfg) -+{ -+ int width = cfg->target_x; -+ -+ if (cfg->dma_type & CAMIF_CODEC ) { -+ u32 yburst_m, yburst_r; -+ u32 cburst_m, cburst_r; -+ /* CODEC DMA WIDHT is multiple of 16 */ -+ if (width % 16) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width, &yburst_m, &yburst_r); -+ camif_g_bsize(width / 2, &cburst_m, &cburst_r); -+ -+ writel(YBURST_M(yburst_m) | CBURST_M(cburst_m) | -+ YBURST_R(yburst_r) | CBURST_R(cburst_r), -+ camregs + S3C2440_CAM_REG_CICOCTRL); -+ } -+ -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ u32 rgburst_m, rgburst_r; -+ if(cfg->fmt == CAMIF_RGB24) { -+ if (width % 2) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width*4,&rgburst_m,&rgburst_r); -+ } else { /* CAMIF_RGB16 */ -+ if ((width / 2) %2) -+ return BURST_ERR; /* DMA Burst Length Error */ -+ camif_g_bsize(width*2,&rgburst_m,&rgburst_r); -+ } -+ -+ writel(RGBURST_M(rgburst_m) | RGBURST_R(rgburst_r), -+ camregs + S3C2440_CAM_REG_CIPRCTRL); -+ } -+ return 0; -+} -+ -+static int camif_gpio_init(void) -+{ -+#ifdef CONFIG_ARCH_S3C24A0A -+ /* S3C24A0A has the dedicated signal pins for Camera */ -+#else -+ s3c2410_gpio_cfgpin(S3C2440_GPJ0, S3C2440_GPJ0_CAMDATA0); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ1, S3C2440_GPJ1_CAMDATA1); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ2, S3C2440_GPJ2_CAMDATA2); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ3, S3C2440_GPJ3_CAMDATA3); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ4, S3C2440_GPJ4_CAMDATA4); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ5, S3C2440_GPJ5_CAMDATA5); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ6, S3C2440_GPJ6_CAMDATA6); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ7, S3C2440_GPJ7_CAMDATA7); -+ -+ s3c2410_gpio_cfgpin(S3C2440_GPJ8, S3C2440_GPJ8_CAMPCLK); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ9, S3C2440_GPJ9_CAMVSYNC); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ10, S3C2440_GPJ10_CAMHREF); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ11, S3C2440_GPJ11_CAMCLKOUT); -+ s3c2410_gpio_cfgpin(S3C2440_GPJ12, S3C2440_GPJ12_CAMRESET); -+#endif -+ return 0; -+} -+ -+ -+#define ROUND_ADD 0x100000 -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+int camif_clock_init(camif_gc_t *gc) -+{ -+ unsigned int upll, camclk_div, camclk; -+ -+ if (!gc) camclk = 24000000; -+ else { -+ camclk = gc->camclk; -+ if (camclk > 48000000) -+ printk(KERN_ERR "Wrong Camera Clock\n"); -+ } -+ -+ CLKCON |= CLKCON_CAM_UPLL | CLKCON_CAM_HCLK; -+ upll = get_bus_clk(GET_UPLL); -+ printk(KERN_INFO "CAMERA:Default UPLL %08d and Assing 96Mhz to UPLL\n",upll); -+ UPLLCON = FInsrt(56, fPLL_MDIV) | FInsrt(2, fPLL_PDIV)| FInsrt(1, fPLL_SDIV); -+ upll = get_bus_clk(GET_UPLL); -+ -+ camclk_div = (upll+ROUND_ADD) / camclk - 1; -+ CLKDIVN = (CLKDIVN & 0xFF) | CLKDIVN_CAM(camclk_div); -+ printk(KERN_INFO"CAMERA:upll %d MACRO 0x%08X CLKDIVN 0x%08X \n", -+ upll, CLKDIVN_CAM(camclk_div), CLKDIVN); -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); /* Dummy ? */ -+ -+ return 0; -+} -+#else -+int camif_clock_init(camif_gc_t *gc) -+{ -+ unsigned int camclk; -+ struct clk *clk_camif = clk_get(NULL, "camif"); -+ struct clk *clk_camif_upll = clk_get(NULL, "camif-upll"); -+ -+ if (!gc) -+ camclk = 24000000; -+ else { -+ camclk = gc->camclk; -+ if (camclk > 48000000) -+ printk(KERN_ERR "Wrong Camera Clock\n"); -+ } -+ -+ clk_set_rate(clk_camif, camclk); -+ -+ clk_enable(clk_camif); -+ clk_enable(clk_camif_upll); -+ -+ -+#if 0 -+ CLKCON |= CLKCON_CAMIF; -+ upll = elfin_get_bus_clk(GET_UPLL); -+ printk(KERN_INFO "CAMERA:Default UPLL %08d and Assing 96Mhz to UPLL\n",upll); -+ { -+ UPLLCON = FInsrt(60, fPLL_MDIV) | FInsrt(4, fPLL_PDIV)| FInsrt(1, fPLL_SDIV); -+ CLKDIVN |= DIVN_UPLL; /* For USB */ -+ upll = elfin_get_bus_clk(GET_UPLL); -+ } -+ -+ camclk_div = (upll+ROUND_ADD) /(camclk * 2) -1; -+ CAMDIVN = CAMCLK_SET_DIV|(camclk_div&0xf); -+ printk(KERN_INFO "CAMERA:upll %08d cam_clk %08d CAMDIVN 0x%08x \n",upll,camclk, CAMDIVN); -+#endif -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); /* Dummy ? */ -+ -+ return 0; -+} -+#endif -+ -+/* -+ Reset Camera IP in CPU -+ Reset External Sensor -+ */ -+void camif_reset(int is, int delay) -+{ -+ switch (is) { -+ case CAMIF_RESET: -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_SWRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ mdelay(1); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_SWRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ case CAMIF_EX_RESET_AH: /*Active High */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(200); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(delay); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ case CAMIF_EX_RESET_AL: /*Active Low */ -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(200); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) & -+ ~GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ udelay(delay); -+ writel(readl(camregs + S3C2440_CAM_REG_CIGCTRL) | -+ GC_CAMRST, -+ camregs + S3C2440_CAM_REG_CIGCTRL); -+ break; -+ default: -+ break; -+ } -+} -+ -+/* For Camera Operation, -+ * we can give the high priority to REQ2 of ARBITER1 -+ */ -+ -+/* Please move me into proper place -+ * camif_gc_t is not because "rmmod imgsenor" will delete the instance of camif_gc_t -+ */ -+static u32 old_priority; -+ -+static void camif_bus_priority(int flag) -+{ -+ if (flag) { -+#ifdef CONFIG_ARCH_S3C24A0A -+ old_priority = PRIORITY0; -+ PRIORITY0 = PRIORITY_I_FIX; -+ PRIORITY1 = PRIORITY_I_FIX; -+ -+#else -+ old_priority = readl(S3C2410_PRIORITY); -+ writel(readl(S3C2410_PRIORITY) & ~(3<<7), S3C2410_PRIORITY); -+ writel(readl(S3C2410_PRIORITY) | (1<<7), S3C2410_PRIORITY); /* Arbiter 1, REQ2 first */ -+ writel(readl(S3C2410_PRIORITY) & ~(1<<1), S3C2410_PRIORITY); /* Disable Priority Rotate */ -+#endif -+ } -+ else { -+#ifdef CONFIG_ARCH_S3C24A0A -+ PRIORITY0 = old_priority; -+ PRIORITY1 = old_priority; -+#else -+ writel(old_priority, S3C2410_PRIORITY); -+#endif -+ } -+} -+ -+static void inline camif_clock_off(void) -+{ -+#if defined (CONFIG_ARCH_S3C24A0A) -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ CLKCON &= ~CLKCON_CAM_UPLL; -+ CLKCON &= ~CLKCON_CAM_HCLK; -+#else -+ struct clk *clk_camif = clk_get(NULL, "camif"); -+ struct clk *clk_camif_upll = clk_get(NULL, "camif-upll"); -+ -+ writel(0, camregs + S3C2440_CAM_REG_CIIMGCPT); -+ -+ clk_disable(clk_camif); -+ clk_disable(clk_camif_upll); -+#endif -+} -+ -+ -+/* Init external image sensor -+ * Before make some value into image senor, -+ * you must set up the pixel clock. -+ */ -+void camif_setup_sensor(void) -+{ -+ camif_reset(CAMIF_RESET, 0); -+ camif_gpio_init(); -+ camif_clock_init(NULL); -+/* Sometimes ,Before loading I2C module, we need the reset signal */ -+#ifdef CONFIG_ARCH_S3C24A0A -+ camif_reset(CAMIF_EX_RESET_AL,1000); -+#else -+ camif_reset(CAMIF_EX_RESET_AH,1000); -+#endif -+} -+ -+void camif_hw_close(camif_cfg_t *cfg) -+{ -+ camif_bus_priority(0); -+ camif_clock_off(); -+} -+ -+void camif_hw_open(camif_gc_t *gc) -+{ -+ camif_source_fmt(gc); -+ camif_win_offset(gc); -+ camif_bus_priority(1); -+} -+ -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/camif_fsm.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/camif_fsm.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,432 @@ -+/* -+ Copyright (C) 2004 Samsung Electronics -+ SW.LEE -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+ -+//#define SW_DEBUG -+static void camif_start_p_with_c(camif_cfg_t *cfg); -+ -+#include "camif.h" -+const char *fsm_version = -+ "$Id: camif_fsm.c,v 1.3 2004/04/27 10:26:28 swlee Exp $"; -+ -+ -+/* -+ * FSM function is the place where Synchronization in not necessary -+ * because IRS calls this functions. -+ */ -+ -+ssize_t camif_p_1fsm_start(camif_cfg_t *cfg) -+{ -+ //camif_reset(CAMIF_RESET,0); -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ camif_last_irq_en(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ return 0; -+} -+ -+ -+ssize_t camif_p_2fsm_start(camif_cfg_t *cfg) -+{ -+ camif_reset(CAMIF_RESET,0);/* FIFO Count goes to zero */ -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ return 0; -+} -+ -+ -+ssize_t camif_4fsm_start(camif_cfg_t *cfg) -+{ -+ camif_reset(CAMIF_RESET,0); /* FIFO Count goes to zero */ -+ cfg->exec = CAMIF_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->status = CAMIF_STARTED; -+ cfg->fsm = CAMIF_1nd_INT; -+ cfg->perf.frames = 0; -+ return 0; -+} -+ -+ -+/* Policy: -+ cfg->perf.frames set in camif_fsm.c -+ cfg->status set in video-driver.c -+ */ -+ -+/* -+ * Don't insert camif_reset(CAM_RESET, 0 ) into this func -+ */ -+ssize_t camif_p_stop(camif_cfg_t *cfg) -+{ -+ cfg->exec = CAMIF_DMA_OFF; -+// cfg->status = CAMIF_STOPPED; -+ camif_capture_stop(cfg); -+ cfg->perf.frames = 0; /* Dupplicated ? */ -+ return 0; -+} -+ -+/* When C working, P asks C to play togehter */ -+/* Only P must call this function */ -+void camif_start_c_with_p (camif_cfg_t *cfg, camif_cfg_t *other) -+{ -+// cfg->gc->other = get_camif(CODEC_MINOR); -+ cfg->gc->other = other; -+ camif_start_p_with_c(cfg); -+} -+ -+static void camif_start_p_with_c(camif_cfg_t *cfg) -+{ -+ camif_cfg_t *other = (camif_cfg_t *)cfg->gc->other; -+ /* Preview Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ camif_capture_stop(cfg); -+ /* Start P and C */ -+ camif_reset(CAMIF_RESET, 0); -+ cfg->exec =CAMIF_BOTH_DMA_ON; -+ camif_capture_start(cfg); -+ cfg->fsm = CAMIF_1nd_INT; /* For Preview */ -+ if(!other) panic("Unexpected Error \n"); -+ other->fsm = CAMIF_1nd_INT; /* For Preview */ -+} -+ -+static void camif_auto_restart(camif_cfg_t *cfg) -+{ -+// if (cfg->dma_type & CAMIF_CODEC) return; -+ if (cfg->auto_restart) -+ camif_start_p_with_c(cfg); -+} -+ -+ -+/* Supposed that PREVIEW already running -+ * request PREVIEW to start with Codec -+ */ -+static int camif_check_global(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ if ( cfg->gc->status & CWANT2START ) { -+ cfg->gc->status &= ~CWANT2START; -+ cfg->auto_restart = 1; -+ ret = 1; -+ } -+ else { -+ ret = 0; /* There is no codec */ -+ cfg->auto_restart = 0; /* Duplicated ..Dummy */ -+ } -+ -+ up(&cfg->gc->lock); -+ -+ return ret; -+} -+ -+/* -+ * 1nd INT : Start Interrupt -+ * Xnd INT : enable Last IRQ : pingpong get the valid data -+ * Ynd INT : Stop Codec or Preview : pingpong get the valid data -+ * Znd INT : Last IRQ : valid data -+ */ -+#define CHECK_FREQ 5 -+int camif_enter_p_4fsm(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ cfg->perf.frames++; -+ if (cfg->fsm == CAMIF_NORMAL_INT) -+ if (cfg->perf.frames % CHECK_FREQ == 0) -+ ret = camif_check_global(cfg); -+ if (ret > 0) cfg->fsm = CAMIF_Xnd_INT; /* Codec wait for Preview */ -+ -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_SKIP; -+ DPRINTK(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_NORMAL_INT: -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "NORMAL INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Xnd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ camif_auto_restart(cfg); /* Automatically Restart Camera */ -+ DPRINTK(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+// DPRINTK(KERN_INFO "Dummy INT \n"); -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT %d \n",cfg->fsm); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* -+ * NO autorestart included in this function -+ */ -+int camif_enter_c_4fsm(camif_cfg_t *cfg) -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+#if 0 -+ if ( (cfg->fsm==CAMIF_NORMAL_INT) -+ && (cfg->perf.frames>cfg->restart_limit-1) -+ ) -+ cfg->fsm = CAMIF_Xnd_INT; -+#endif -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_NORMAL_INT; -+// cfg->status = CAMIF_STARTED; /* need this to meet auto-restart */ -+ ret = INSTANT_SKIP; -+ DPRINTK(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_NORMAL_INT: -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_NORMAL_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "NORMALd INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Xnd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ DPRINTK(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT %d \n",cfg->fsm); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+/* 4 Interrups State Machine is for two pingpong -+ * 1nd INT : Start Interrupt -+ * Xnd INT : enable Last IRQ : pingpong get the valid data -+ * Ynd INT : Stop Codec or Preview : pingpong get the valid data -+ * Znd INT : Last IRQ : valid data -+ * -+ * Note: -+ * Before calling this func, you must call camif_reset -+ */ -+ -+int camif_enter_2fsm(camif_cfg_t *cfg) /* Codec FSM */ -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+ switch (cfg->fsm) { -+ case CAMIF_1nd_INT: /* Start IRQ */ -+ cfg->fsm = CAMIF_Xnd_INT; -+ ret = INSTANT_SKIP; -+// printk(KERN_INFO "1nd INT \n"); -+ break; -+ case CAMIF_Xnd_INT: -+ camif_last_irq_en(cfg);/* IRQ for Enabling LAST IRQ */ -+ cfg->now_frame_num = 0; -+ cfg->status = CAMIF_INT_HAPPEN; -+ cfg->fsm = CAMIF_Ynd_INT; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "2nd INT \n"); -+ break; -+ case CAMIF_Ynd_INT: /* Capture Stop */ -+ cfg->exec = CAMIF_DMA_OFF; -+ cfg->now_frame_num = 1; -+ cfg->status = CAMIF_INT_HAPPEN; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->now_frame_num = 0; -+// cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+// printk(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ printk(KERN_INFO "Dummy INT \n"); -+ break; -+ default: /* CAMIF_PENDING_INT */ -+ printk(KERN_INFO "Unexpect INT \n"); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* 2 Interrups State Machine is for one pingpong -+ * 1nd INT : Stop Codec or Preview : pingpong get the valid data -+ * 2nd INT : Last IRQ : dummy data -+ */ -+int camif_enter_1fsm(camif_cfg_t *cfg) /* Codec FSM */ -+{ -+ int ret; -+ -+ cfg->perf.frames++; -+ switch (cfg->fsm) { -+ case CAMIF_Ynd_INT: /* IRQ for Enabling LAST IRQ */ -+ cfg->exec = CAMIF_DMA_OFF; -+ camif_capture_stop(cfg); -+ cfg->fsm = CAMIF_Znd_INT; -+ ret = INSTANT_SKIP; -+ // printk(KERN_INFO "Ynd INT \n"); -+ break; -+ case CAMIF_Znd_INT: /* LAST IRQ (Dummy IRQ */ -+ cfg->fsm = CAMIF_DUMMY_INT; -+ cfg->status = CAMIF_INT_HAPPEN; -+ ret = INSTANT_GO; -+ // printk(KERN_INFO "Znd INT \n"); -+ break; -+ case CAMIF_DUMMY_INT: -+ cfg->status = CAMIF_STOPPED; /* Dupplicate ? */ -+ ret = INSTANT_SKIP; -+ printk(KERN_INFO "Dummy INT \n"); -+ break; -+ default: -+ printk(KERN_INFO "Unexpect INT \n"); -+ ret = INSTANT_SKIP; -+ break; -+ } -+ return ret; -+} -+ -+ -+/* -+ * GLOBAL STATUS CONTROL FUNCTION -+ * -+ */ -+ -+ -+/* Supposed that PREVIEW already running -+ * request PREVIEW to start with Codec -+ */ -+int camif_callback_start(camif_cfg_t *cfg) -+{ -+ int doit = 1; -+ while (doit) { -+ if (down_interruptible(&cfg->gc->lock)) { -+ return -ERESTARTSYS; -+ } -+ cfg->gc->status = CWANT2START; -+ cfg->gc->other = cfg; -+ up(&cfg->gc->lock); -+ doit = 0; -+ } -+ return 0; -+} -+ -+/* -+ * Return status of Preview Machine -+ ret value : -+ 0: Preview is not working -+ X: Codec must follow PREVIEW start -+*/ -+int camif_check_preview(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (down_interruptible(&cfg->gc->lock)) { -+ ret = -ERESTARTSYS; -+ return ret; -+ } -+ if (cfg->gc->user == 1) ret = 0; -+ // else if (cfg->gc->status & PNOTWORKING) ret = 0; -+ else ret = 1; -+ up(&cfg->gc->lock); -+ return ret; -+} -+ -+ -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/camif.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/camif.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,304 @@ -+/* -+ FIMC2.0 Camera Header File -+ -+ Copyright (C) 2003 Samsung Electronics (SW.LEE: hitchcar@samsung.com) -+ -+ Author : SW.LEE -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+* -+*/ -+ -+ -+#ifndef __FIMC20_CAMIF_H_ -+#define __FIMC20_CAMIF_H_ -+ -+#ifdef __KERNEL__ -+ -+#include "bits.h" -+#include "videodev.h" -+#include -+#include -+ -+#endif /* __KERNEL__ */ -+ -+#ifndef O_NONCAP -+#define O_NONCAP O_TRUNC -+#endif -+ -+/* Codec or Preview Status */ -+#define CAMIF_STARTED BIT1 -+#define CAMIF_STOPPED BIT2 -+#define CAMIF_INT_HAPPEN BIT3 -+ -+/* Codec or Preview : Interrupt FSM */ -+#define CAMIF_1nd_INT BIT7 -+#define CAMIF_Xnd_INT BIT8 -+#define CAMIF_Ynd_INT BIT9 -+#define CAMIF_Znd_INT BIT10 -+#define CAMIF_NORMAL_INT BIT11 -+#define CAMIF_DUMMY_INT BIT12 -+#define CAMIF_PENDING_INT 0 -+ -+ -+/* CAMIF RESET Definition */ -+#define CAMIF_RESET BIT0 -+#define CAMIF_EX_RESET_AL BIT1 /* Active Low */ -+#define CAMIF_EX_RESET_AH BIT2 /* Active High */ -+ -+ -+enum camif_itu_fmt { -+ CAMIF_ITU601 = BIT31, -+ CAMIF_ITU656 = 0 -+}; -+ -+/* It is possbie to use two device simultaneously */ -+enum camif_dma_type { -+ CAMIF_PREVIEW = BIT0, -+ CAMIF_CODEC = BIT1, -+}; -+ -+enum camif_order422 { -+ CAMIF_YCBYCR = 0, -+ CAMIF_YCRYCB = BIT14, -+ CAMIF_CBYCRY = BIT15, -+ CAMIF_CRYCBY = BIT14 | BIT15 -+}; -+ -+enum flip_mode { -+ CAMIF_FLIP = 0, -+ CAMIF_FLIP_X = BIT14, -+ CAMIF_FLIP_Y = BIT15, -+ CAMIF_FLIP_MIRROR = BIT14 |BIT15, -+}; -+ -+enum camif_codec_fmt { -+ /* Codec part */ -+ CAMIF_IN_YCBCR420 = BIT0, /* Currently IN_YCBCR format fixed */ -+ CAMIF_IN_YCBCR422 = BIT1, -+ CAMIF_OUT_YCBCR420 = BIT4, -+ CAMIF_OUT_YCBCR422 = BIT5, -+ /* Preview Part */ -+ CAMIF_RGB16 = BIT2, -+ CAMIF_RGB24 = BIT3, -+}; -+ -+enum camif_capturing { -+ CAMIF_BOTH_DMA_ON = BIT4, -+ CAMIF_DMA_ON = BIT3, -+ CAMIF_BOTH_DMA_OFF = BIT1, -+ CAMIF_DMA_OFF = BIT0, -+ /*------------------------*/ -+ CAMIF_DMA_OFF_L_IRQ= BIT5, -+}; -+ -+typedef struct camif_performance -+{ -+ int frames; -+ int framesdropped; -+ __u64 bytesin; -+ __u64 bytesout; -+ __u32 reserved[4]; -+} camif_perf_t; -+ -+ -+typedef struct { -+ dma_addr_t phys_y; -+ dma_addr_t phys_cb; -+ dma_addr_t phys_cr; -+ u8 *virt_y; -+ u8 *virt_cb; -+ u8 *virt_cr; -+ dma_addr_t phys_rgb; -+ u8 *virt_rgb; -+}img_buf_t; -+ -+ -+/* this structure convers the CIWDOFFST, prescaler, mainscaler */ -+typedef struct { -+ u32 modified_src_x; /* After windows applyed to source_x */ -+ u32 modified_src_y; -+ u32 hfactor; -+ u32 vfactor; -+ u32 shfactor; /* SHfactor = 10 - ( hfactor + vfactor ) */ -+ u32 prehratio; -+ u32 prevratio; -+ u32 predst_x; -+ u32 predst_y; -+ u32 scaleup_h; -+ u32 scaleup_v; -+ u32 mainhratio; -+ u32 mainvratio; -+ u32 scalerbypass; /* only codec */ -+} scaler_t; -+ -+ -+enum v4l2_status { -+ CAMIF_V4L2_INIT = BIT0, -+ CAMIF_v4L2_DIRTY = BIT1, -+}; -+ -+ -+/* Global Status Definition */ -+#define PWANT2START BIT0 -+#define CWANT2START BIT1 -+#define BOTH_STARTED (PWANT2START|CWANT2START) -+#define PNOTWORKING BIT4 -+#define C_WORKING BIT5 -+ -+typedef struct { -+ struct semaphore lock; -+ enum camif_itu_fmt itu_fmt; -+ enum camif_order422 order422; -+ u32 win_hor_ofst; -+ u32 win_ver_ofst; -+ u32 camclk; /* External Image Sensor Camera Clock */ -+ u32 source_x; -+ u32 source_y; -+ u32 polarity_pclk; -+ u32 polarity_vsync; -+ u32 polarity_href; -+ struct i2c_client *sensor; -+ u32 user; /* MAX 2 (codec, preview) */ -+ u32 old_priority; /* BUS PRIORITY register */ -+ u32 status; -+ u32 init_sensor;/* initializing sensor */ -+ void *other; /* Codec camif_cfg_t */ -+ u32 reset_type; /* External Sensor Reset Type */ -+ u32 reset_udelay; -+} camif_gc_t; /* gobal control register */ -+ -+ -+/* when App want to change v4l2 parameter, -+ * we instantly store it into v4l2_t v2 -+ * and then reflect it to hardware -+ */ -+typedef struct v4l2 { -+ struct v4l2_fmtdesc *fmtdesc; -+ struct v4l2_pix_format fmt; /* current pixel format */ -+ struct v4l2_input input; -+ struct video_picture picture; -+ enum v4l2_status status; -+ int used_fmt ; /* used format index */ -+} v4l2_t; -+ -+ -+typedef struct camif_c_t { -+ struct video_device *v; -+ /* V4L2 param only for v4l2 driver */ -+ v4l2_t v2; -+ camif_gc_t *gc; /* Common between Codec and Preview */ -+ /* logical parameter */ -+ wait_queue_head_t waitq; -+ u32 status; /* Start/Stop */ -+ u32 fsm; /* Start/Stop */ -+ u32 open_count; /* duplicated */ -+ int irq; -+ char shortname[16]; -+ u32 target_x; -+ u32 target_y; -+ scaler_t sc; -+ enum flip_mode flip; -+ enum camif_dma_type dma_type; -+ /* 4 pingpong Frame memory */ -+ u8 *pp_virt_buf; -+ dma_addr_t pp_phys_buf; -+ u32 pp_totalsize; -+ u32 pp_num; /* used pingpong memory number */ -+ img_buf_t img_buf[4]; -+ enum camif_codec_fmt fmt; -+ enum camif_capturing exec; -+ camif_perf_t perf; -+ u32 now_frame_num; -+ u32 auto_restart; /* Only For Preview */ -+} camif_cfg_t; -+ -+#ifdef SW_DEBUG -+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args) -+#else -+#define DPRINTK(fmt, args...) -+#endif -+ -+ -+#ifdef SW_DEBUG -+#define assert(expr) \ -+ if(!(expr)) { \ -+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \ -+ #expr,__FILE__,__FUNCTION__,__LINE__); \ -+ } -+#else -+#define assert(expr) -+#endif -+ -+ -+ -+extern int camif_capture_start(camif_cfg_t *); -+extern int camif_capture_stop(camif_cfg_t *); -+extern int camif_g_frame_num(camif_cfg_t *); -+extern u8 * camif_g_frame(camif_cfg_t *); -+extern int camif_win_offset(camif_gc_t *); -+extern void camif_hw_open(camif_gc_t *); -+extern void camif_hw_close(camif_cfg_t *); -+extern int camif_dynamic_open(camif_cfg_t *); -+extern int camif_dynamic_close(camif_cfg_t *); -+extern void camif_reset(int,int); -+extern void camif_setup_sensor(void); -+extern int camif_g_fifo_status(camif_cfg_t *); -+extern void camif_last_irq_en(camif_cfg_t *); -+extern void camif_change_flip(camif_cfg_t *); -+ -+ -+/* Todo -+ * API Interface function to both Character and V4L2 Drivers -+ */ -+extern int camif_do_write(struct file *,const char *, size_t, loff_t *); -+extern int camif_do_ioctl(struct inode *, struct file *,unsigned int, void *); -+ -+ -+/* -+ * API for Decoder (S5x532, OV7620..) -+ */ -+void camif_register_decoder(struct i2c_client *); -+void camif_unregister_decoder(struct i2c_client*); -+ -+ -+ -+/* API for FSM */ -+#define INSTANT_SKIP 0 -+#define INSTANT_GO 1 -+ -+extern ssize_t camif_p_1fsm_start(camif_cfg_t *); -+extern ssize_t camif_p_2fsm_start(camif_cfg_t *); -+extern ssize_t camif_4fsm_start(camif_cfg_t *); -+extern ssize_t camif_p_stop(camif_cfg_t *); -+extern int camif_enter_p_4fsm(camif_cfg_t *); -+extern int camif_enter_c_4fsm(camif_cfg_t *); -+extern int camif_enter_2fsm(camif_cfg_t *); -+extern int camif_enter_1fsm(camif_cfg_t *); -+extern int camif_check_preview(camif_cfg_t *); -+extern int camif_callback_start(camif_cfg_t *); -+extern int camif_clock_init(camif_gc_t *); -+ -+/* -+ * V4L2 Part -+ */ -+#define VID_HARDWARE_SAMSUNG_FIMC20 236 -+ -+ -+ -+ -+ -+#endif -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/cam_reg.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/cam_reg.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,234 @@ -+ /*---------------------------------------------------------- -+ * (C) 2004 Samsung Electronics -+ * SW.LEE < hitchcar@samsung.com> -+ * -+ ----------------------------------------------------------- */ -+ -+#ifndef __FIMC20_CAMERA_H__ -+#define __FIMC20_CAMERA_H__ -+ -+extern u32 * camregs; -+ -+#ifdef CONFIG_ARCH_S3C24A0 -+#define CAM_BASE_ADD 0x48000000 -+#else /* S3C2440A */ -+#define CAM_BASE_ADD 0x4F000000 -+#endif -+ -+#if ! defined(FExtr) -+#define UData(Data) ((unsigned long) (Data)) -+#define FExtr(Data, Field) \ -+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) -+#define FInsrt(Value, Field) \ -+ (UData (Value) << FShft (Field)) -+#define FSize(Field) ((Field) >> 16) -+#define FShft(Field) ((Field) & 0x0000FFFF) -+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -+#define F1stBit(Field) (UData (1) << FShft (Field)) -+#define Fld(Size, Shft) (((Size) << 16) + (Shft)) -+#endif -+ -+/* -+ * CAMERA IP -+ * P-port is used as RGB Capturing device which including scale and crop -+ * those who want to see(preview ) the image on display needs RGB image. -+ * -+ * C-port is used as YCbCr(4:2:0, 4:2:2) Capturing device which including the scale and crop -+ * the prefix of C-port have the meaning of "Codec" ex. mpeg4, h263.. which requries the -+ YCBCB format not RGB -+ */ -+ -+#define S3C2440_CAM_REG_CISRCFMT (0x00) // RW Input Source Format -+#define S3C2440_CAM_REG_CIWDOFST (0x04) // Window offset register -+#define S3C2440_CAM_REG_CIGCTRL (0x08) // Global control register -+#define S3C2440_CAM_REG_CICOYSA0 (0x18) // Y 1 st frame start ads -+#define S3C2440_CAM_REG_CICOYSA1 (0x1C) // Y 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOYSA2 (0x20) // Y 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOYSA3 (0x24) // Y 4 th frame start ads -+#define S3C2440_CAM_REG_CICOCBSA0 (0x28) // Cb 1 st frame start ads -+#define S3C2440_CAM_REG_CICOCBSA1 (0x2C) // Cb 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOCBSA2 (0x30) // Cb 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOCBSA3 (0x34) // Cb 4 th frame start ads -+#define S3C2440_CAM_REG_CICOCRSA0 (0x38) // Cr 1 st frame start ads -+#define S3C2440_CAM_REG_CICOCRSA1 (0x3C) // Cr 2 nd frame start ads -+#define S3C2440_CAM_REG_CICOCRSA2 (0x40) // Cr 3 rd frame start ads -+#define S3C2440_CAM_REG_CICOCRSA3 (0x44) // Cr 4 th frame start ads -+#define S3C2440_CAM_REG_CICOTRGFMT (0x48) // Target img format of codec -+#define S3C2440_CAM_REG_CICOCTRL (0x4C) // Codec DMA control related -+#define S3C2440_CAM_REG_CICOSCPRERATIO (0x50) // Codec pre-scaler ratio -+#define S3C2440_CAM_REG_CICOSCPREDST (0x54) // Codec pre-scaler dest -+#define S3C2440_CAM_REG_CICOSCCTRL (0x58) // Codec main-scaler control -+#define S3C2440_CAM_REG_CICOTAREA (0x5C) // Codec pre-scaler dest -+#define S3C2440_CAM_REG_CICOSTATUS (0x64) // Codec path status -+#define S3C2440_CAM_REG_CIPRCLRSA0 (0x6C) // RGB 1 st frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA1 (0x70) // RGB 2 nd frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA2 (0x74) // RGB 3 rd frame start ads -+#define S3C2440_CAM_REG_CIPRCLRSA3 (0x78) // RGB 4 th frame start ads -+#define S3C2440_CAM_REG_CIPRTRGFMT (0x7C) // Target img fmt of preview -+#define S3C2440_CAM_REG_CIPRCTRL (0x80) // Preview DMA ctl related -+#define S3C2440_CAM_REG_CIPRSCPRERATIO (0x84) // Preview pre-scaler ratio -+#define S3C2440_CAM_REG_CIPRSCPREDST (0x88) // Preview pre-scaler dest -+#define S3C2440_CAM_REG_CIPRSCCTRL (0x8C) // Preview main-scaler ctl -+#define S3C2440_CAM_REG_CIPRTAREA (0x90) // Preview pre-scaler dest -+#define S3C2440_CAM_REG_CIPRSTATUS (0x98) // Preview path status -+#define S3C2440_CAM_REG_CIIMGCPT (0xA0) // Image capture enable cmd -+ -+#define S3C2440_CAM_REG_CICOYSA(__x) (0x18 + (__x)*4 ) -+#define S3C2440_CAM_REG_CICOCBSA(__x) (0x28 + (__x)*4 ) -+#define S3C2440_CAM_REG_CICOCRSA(__x) (0x38 + (__x)*4 ) -+#define S3C2440_CAM_REG_CIPRCLRSA(__x) (0x6C + (__x)*4 ) -+ -+/* CISRCFMT BitField */ -+#define SRCFMT_ITU601 BIT31 -+#define SRCFMT_ITU656 0 -+#define SRCFMT_UVOFFSET_128 BIT30 -+#define fCAM_SIZE_H Fld(13, 16) -+#define fCAM_SIZE_V Fld(13, 0) -+#define SOURCE_HSIZE(x) FInsrt((x), fCAM_SIZE_H) -+#define SOURCE_VSIZE(x) FInsrt((x), fCAM_SIZE_V) -+ -+ -+/* Window Option Register */ -+#define WINOFEN BIT31 -+#define CO_FIFO_Y BIT30 -+#define CO_FIFO_CB BIT15 -+#define CO_FIFO_CR BIT14 -+#define PR_FIFO_CB BIT13 -+#define PR_FIFO_CR BIT12 -+#define fWINHOR Fld(11, 16) -+#define fWINVER Fld(11, 0) -+#define WINHOROFST(x) FInsrt((x), fWINHOR) -+#define WINVEROFST(x) FInsrt((x), fWINVER) -+ -+/* Global Control Register */ -+#define GC_SWRST BIT31 -+#define GC_CAMRST BIT30 -+#define GC_INVPOLPCLK BIT26 -+#define GC_INVPOLVSYNC BIT25 -+#define GC_INVPOLHREF BIT24 -+ -+/*-------------------------------------------------- -+ REGISTER BIT FIELD DEFINITION TO -+ YCBCR and RGB -+----------------------------------------------------*/ -+/* Codec Target Format Register */ -+#define IN_YCBCR420 0 -+#define IN_YCBCR422 BIT31 -+#define OUT_YCBCR420 0 -+#define OUT_YCBCR422 BIT30 -+ -+#if 0 -+#define FLIP_NORMAL 0 -+#define FLIP_X (BIT14) -+#define FLIP_Y (BIT15) -+#define FLIP_MIRROR (BIT14|BIT15) -+#endif -+ -+/** BEGIN ************************************/ -+/* Cotents: Common in both P and C port */ -+#define fTARGET_HSIZE Fld(13,16) -+#define TARGET_HSIZE(x) FInsrt((x), fTARGET_HSIZE) -+#define fTARGET_VSIZE Fld(13,0) -+#define TARGET_VSIZE(x) FInsrt((x), fTARGET_VSIZE) -+#define FLIP_X_MIRROR BIT14 -+#define FLIP_Y_MIRROR BIT15 -+#define FLIP_180_MIRROR (BIT14 | BIT15) -+/** END *************************************/ -+ -+/* Codec DMA Control Register */ -+#define fYBURST_M Fld(5,19) -+#define fYBURST_R Fld(5,14) -+#define fCBURST_M Fld(5,9) -+#define fCBURST_R Fld(5,4) -+#define YBURST_M(x) FInsrt((x), fYBURST_M) -+#define CBURST_M(x) FInsrt((x), fCBURST_M) -+#define YBURST_R(x) FInsrt((x), fYBURST_R) -+#define CBURST_R(x) FInsrt((x), fCBURST_R) -+#define LAST_IRQ_EN BIT2 /* Common in both P and C port */ -+/* -+ * Check the done signal of capturing image for JPEG -+ * !!! AutoClear Bit -+ */ -+ -+ -+/* (Codec, Preview ) Pre-Scaler Control Register 1 */ -+#define fSHIFT Fld(4,28) -+#define PRE_SHIFT(x) FInsrt((x), fSHIFT) -+#define fRATIO_H Fld(7,16) -+#define PRE_HRATIO(x) FInsrt((x), fRATIO_H) -+#define fRATIO_V Fld(7,0) -+#define PRE_VRATIO(x) FInsrt((x), fRATIO_V) -+ -+/* (Codec, Preview ) Pre-Scaler Control Register 2*/ -+#define fDST_WIDTH Fld(12,16) -+#define fDST_HEIGHT Fld(12,0) -+#define PRE_DST_WIDTH(x) FInsrt((x), fDST_WIDTH) -+#define PRE_DST_HEIGHT(x) FInsrt((x), fDST_HEIGHT) -+ -+ -+/* (Codec, Preview) Main-scaler control Register */ -+#define S_METHOD BIT31 /* Sampling method only for P-port */ -+#define SCALERSTART BIT15 -+/* Codec scaler bypass for upper 2048x2048 -+ where ImgCptEn_CoSC and ImgCptEn_PrSC should be 0 -+*/ -+ -+#define SCALERBYPASS BIT31 -+#define RGB_FMT24 BIT30 -+#define RGB_FMT16 0 -+ -+/* -+#define SCALE_UP_H BIT29 -+#define SCALE_UP_V BIT28 -+*/ -+ -+#define fMAIN_HRATIO Fld(9, 16) -+#define MAIN_HRATIO(x) FInsrt((x), fMAIN_HRATIO) -+ -+#define SCALER_START BIT15 -+ -+#define fMAIN_VRATIO Fld(9, 0) -+#define MAIN_VRATIO(x) FInsrt((x), fMAIN_VRATIO) -+ -+/* (Codec, Preview ) DMA Target AREA Register */ -+#define fCICOTAREA Fld(26,0) -+#define TARGET_DMA_AREA(x) FInsrt((x), fCICOTAREA) -+ -+/* Preview DMA Control Register */ -+#define fRGBURST_M Fld(5,19) -+#define fRGBURST_R Fld(5,14) -+#define RGBURST_M(x) FInsrt((x), fRGBURST_M) -+#define RGBURST_R(x) FInsrt((x), fRGBURST_R) -+ -+ -+/* (Codec, Preview) Status Register */ -+#define CO_OVERFLOW_Y BIT31 -+#define CO_OVERFLOW_CB BIT30 -+#define CO_OVERFLOW_CR BIT29 -+#define PR_OVERFLOW_CB BIT31 -+#define PR_OVERFLOW_CR BIT30 -+ -+#define VSYNC BIT28 -+ -+#define fFRAME_CNT Fld(2,26) -+#define FRAME_CNT(x) FExtr((x),fFRAME_CNT) -+ -+#define WIN_OFF_EN BIT25 -+#define fFLIP_MODE Fld(2,23) -+#define FLIP_MODE(x) EExtr((x), fFLIP_MODE) -+#define CAP_STATUS_CAMIF BIT22 -+#define CAP_STATUS_CODEC BIT21 -+#define CAP_STATUS_PREVIEW BIT21 -+#define VSYNC_A BIT20 -+#define VSYNC_B BIT19 -+ -+/* Image Capture Enable Regiser */ -+#define CAMIF_CAP_ON BIT31 -+#define CAMIF_CAP_CODEC_ON BIT30 -+#define CAMIF_CAP_PREVIEW_ON BIT29 -+ -+ -+ -+ -+#endif /* S3C2440_CAMER_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/imgsensor.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/imgsensor.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,250 @@ -+/* -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * Copyright (C) 2000 Russell King : pcf8583.c -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Driver for FIMC20 Camera Decoder -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#ifdef CONFIG_ARCH_S3C24A0A -+#else -+//#include -+#endif -+ -+#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "sensor.h" -+ -+#ifndef SAMSUNG_SXGA_CAM -+#include "s5x532_rev36.h" -+#else -+#include "sxga.h" -+#endif -+ -+static struct i2c_driver s5x532_driver; -+static camif_gc_t data = { -+ itu_fmt: CAMIF_ITU601, -+ order422: CAMIF_YCBYCR, -+ camclk: 24000000, -+#ifndef SAMSUNG_SXGA_CAM -+ source_x: 640, -+ source_y: 480, -+ win_hor_ofst: 112, -+ win_ver_ofst: 20, -+#else -+ source_x: 1280, -+ source_y: 1024, -+ win_hor_ofst: 0, -+ win_ver_ofst: 0, -+#endif -+ polarity_pclk:1, -+ polarity_href:0, -+#ifdef CONFIG_ARCH_S3C24A0A -+ reset_type:CAMIF_EX_RESET_AL, /* Active Low */ -+#else -+ reset_type:CAMIF_EX_RESET_AH, /* Ref board has inverted signal */ -+#endif -+ reset_udelay:2000, -+}; -+ -+#define CAM_ID 0x5a -+ -+static unsigned short ignore = I2C_CLIENT_END; -+static unsigned short normal_addr[] = { (CAM_ID>>1), I2C_CLIENT_END }; -+static struct i2c_client_address_data addr_data = { -+ normal_i2c: normal_addr, -+ probe: &ignore, -+ ignore: &ignore, -+}; -+ -+s5x532_t s5x532_regs_mirror[S5X532_REGS]; -+ -+unsigned char -+s5x532_read(struct i2c_client *client, unsigned char subaddr) -+{ -+ int ret; -+ unsigned char buf[1]; -+ struct i2c_msg msg ={ client->addr, 0, 1, buf}; -+ buf[0] = subaddr; -+ -+ ret = i2c_transfer(client->adapter,&msg, 1) == 1 ? 0 : -EIO; -+ if (ret == -EIO) { -+ printk(" I2C write Error \n"); -+ return -EIO; -+ } -+ -+ msg.flags = I2C_M_RD; -+ ret = i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EIO; -+ -+ return buf[0]; -+} -+ -+ -+static int -+s5x532_write(struct i2c_client *client, -+ unsigned char subaddr, unsigned char val) -+{ -+ unsigned char buf[2]; -+ struct i2c_msg msg = { client->addr, 0, 2, buf}; -+ -+ buf[0]= subaddr; -+ buf[1]= val; -+ -+ return i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EIO; -+} -+ -+void inline s5x532_init(struct i2c_client *sam_client) -+{ -+ int i; -+ -+ printk(KERN_ERR "s5x532_init \n"); -+ for (i = 0; i < S5X532_INIT_REGS; i++) { -+ s5x532_write(sam_client, -+ s5x532_reg[i].subaddr, s5x532_reg[i].value ); -+ } -+ -+#ifdef YOU_WANT_TO_CHECK_IMG_SENSOR -+ for (i = 0; i < S5X532_INIT_REGS;i++) { -+ if ( s5x532_reg[i].subaddr == PAGE_ADDRESS ) { -+ s5x532_write(sam_client, -+ s5x532_reg[i].subaddr, s5x532_reg[i].value); -+ -+ printk(KERN_ERR "Page: Subaddr %02x = 0x%02x\n", -+ s5x532_reg[i].subaddr, s5x532_regs_mirror[i].value); -+ -+ -+ } else -+ { -+ s5x532_regs_mirror[i].subaddr = s5x532_reg[i].subaddr; -+ s5x532_regs_mirror[i].value = -+ s5x532_read(sam_client,s5x532_reg[i].subaddr); -+ printk(KERN_ERR "Subaddr %02x = 0x%02x\n", -+ s5x532_reg[i].subaddr, s5x532_regs_mirror[i].value); -+ } -+ } -+#endif -+ -+} -+ -+static int -+s5x532_attach(struct i2c_adapter *adap, int addr, int kind) -+{ -+ struct i2c_client *c; -+ -+ c = kmalloc(sizeof(*c), GFP_KERNEL); -+ if (!c) return -ENOMEM; -+ -+ strcpy(c->name, "S5X532"); -+// c->id = s5x532_driver.id; -+ c->flags = 0 /* I2C_CLIENT_ALLOW_USE */; -+ c->addr = addr; -+ c->adapter = adap; -+ c->driver = &s5x532_driver; -+ data.sensor = c; -+ i2c_set_clientdata(c, &data); -+ -+ camif_register_decoder(c); -+ return i2c_attach_client(c); -+} -+ -+static int s5x532_probe(struct i2c_adapter *adap) -+{ -+ return i2c_probe(adap, &addr_data, s5x532_attach); -+} -+ -+static int s5x532_detach(struct i2c_client *client) -+{ -+ i2c_detach_client(client); -+ camif_unregister_decoder(client); -+ return 0; -+} -+ -+static int -+s5x532_command(struct i2c_client *client, unsigned int cmd, void *arg) -+{ -+ switch (cmd) { -+ case SENSOR_INIT: -+ s5x532_init(client); -+ printk(KERN_INFO "CAMERA: S5X532 Sensor initialized\n"); -+ break; -+ case USER_ADD: -+ /* MOD_INC_USE_COUNT; uh.. 2.6 deals with this, old-timer */ -+ break; -+ case USER_EXIT: -+ /* MOD_DEC_USE_COUNT; */ -+ break; -+/* Todo -+ case SENSOR_BRIGHTNESS: -+ change_sensor(); -+ break; -+*/ -+ default: -+ panic("Unexpect Sensor Command \n"); -+ break; -+ } -+ return 0; -+} -+ -+static struct i2c_driver s5x532_driver = { -+ driver: { name: "S5X532" }, -+ id: 0, /* optional in i2c-id.h I2C_ALGO_S3C, */ -+ attach_adapter: s5x532_probe, -+ detach_client: s5x532_detach, -+ command: s5x532_command -+}; -+ -+static void iic_gpio_port(void) -+{ -+/* FIXME: no gpio config for i2c !!! -+#ifdef CONFIG_ARCH_S3C24A0A -+#else -+ GPECON &= ~(0xf <<28); -+ GPECON |= 0xa <<28; -+#endif -+*/ -+} -+ -+static __init int camif_sensor_init(void) -+{ -+ iic_gpio_port(); -+ return i2c_add_driver(&s5x532_driver); -+} -+ -+ -+static __init void camif_sensor_exit(void) -+{ -+ i2c_del_driver(&s5x532_driver); -+} -+ -+module_init(camif_sensor_init) -+module_exit(camif_sensor_exit) -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("I2C Client Driver For Fimc2.0 MISC Driver"); -+MODULE_LICENSE("GPL"); -+ -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,7 @@ -+ -+config S3C2440_CAMERA -+ bool "S3C24xx Camera interface" -+ depends on ARCH_S3C2410 -+ help -+ Camera driver for S3C2440 camera unit -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/Makefile 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,8 @@ -+obj-$(CONFIG_S3C2440_CAMERA) += \ -+ videodev.o \ -+ imgsensor.o \ -+ video-driver.o \ -+ camif.o \ -+ camif_fsm.o \ -+ qt-driver.o -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/miscdevice.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/miscdevice.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,18 @@ -+ -+ /*---------------------------------------------------------- -+ * (C) 2004 Samsung Electronics -+ * SW.LEE < hitchcar@samsung.com> -+ * -+ ----------------------------------------------------------- */ -+ -+#ifndef _LINUX_S3C_MISCDEVICE_H -+#define _LINUX_S3C_MISCDEVICE_H -+ -+#define CODEC_MINOR 212 -+#define PREVIEW_MINOR 213 -+ -+ -+ -+ -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/qt-driver.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/qt-driver.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,172 @@ -+/* -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+//#define SW_DEBUG -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+#include "cam_reg.h" -+#include "sensor.h" -+#include "userapp.h" -+ -+extern camif_cfg_t * get_camif(int nr); -+ -+ -+/************************* Sharp Zarus API ************************** -+* refering to Camera Driver API for SL-5000D/SL-5600 revision 1.00 -+* April 11, 2002. -+ SW.LEE -+ I want to use Sharp Camera Application. -+* -+*/ -+ -+#define READ_MODE_STATUS 0x1 -+#define READ_MODE_IMAGE 0x0 -+#define CAPTURE_SPEED -+#define H_FLIP -+#define V_FLIP -+typedef enum sharp_readmode -+{ -+ IMAGE = 0, STATUS = 1, -+ FASTER = 0, BETTER = 2, -+ XNOFLIP = 0, XFLIP = 4, -+ YNOFLIP = 0, YFLIP = 8, -+ AUTOMATICFLIP = -1 -+} ReadMode_t; -+ -+ -+static struct sharp_param_t { -+ ReadMode_t readMode; -+ char CameraStatus[4]; -+} sharp_param = { STATUS, {'s','m','c','A'}}; -+ -+ -+camif_param_t qt_parm = { 640,480,240,320,16,0}; -+ -+static void setReadMode(const char *b,size_t count) -+{ -+ int i = *(b+2) - 48 ; -+ if ( 4 == count ) { -+ i = (*(b+3) - 48) + i * 10; -+ } -+ -+ // DPRINTK(" setReadMode %s conversion value %d \n",b , i); -+ if ( i & STATUS ) { -+ // DPRINTK(" STATUS MODE \n"); -+ sharp_param.readMode = i; -+ } -+ else { -+ // DPRINTK(" IMAGE MODE \n"); -+ sharp_param.readMode = i; -+ } -+} -+ -+ -+ -+ -+extern ssize_t camif_p_read(struct file *, char *, size_t , loff_t *); -+ -+ssize_t z_read(struct file *f, char *buf, size_t count, loff_t *pos) -+{ -+ size_t end; -+ -+ if (sharp_param.readMode & STATUS ) { -+ buf[0] = sharp_param.CameraStatus[0]; -+ buf[1] = sharp_param.CameraStatus[1]; -+ buf[2] = sharp_param.CameraStatus[2]; -+ buf[3] = sharp_param.CameraStatus[3]; -+ end = 4; -+ return end; -+ } -+ else { /* Image ReadMode */ -+ /* -+ if (( sharp_param.readMode & (BETTER|X FLIP|YFLIP))) -+ DPRINTK(" Not Supporting BETTER|XFLIP|YFLIP\n"); -+ */ -+ return camif_p_read(f,buf,count,pos); -+ } -+} -+ -+static void z_config(camif_cfg_t *cfg,int x, int y) -+{ -+ cfg->target_x = x; -+ cfg->target_y = y; -+ cfg->fmt = CAMIF_RGB16; -+ if (camif_dynamic_open(cfg)) { -+ panic(" Eror Happens \n"); -+ } -+} -+ -+ -+ssize_t z_write(struct file *f, const char *b, size_t c, loff_t *pos) -+{ -+ int array[5]; -+ int zoom = 1; -+ camif_cfg_t *cfg; -+ -+ cfg = get_camif(MINOR(f->f_dentry->d_inode->i_rdev)); -+// DPRINTK(" param %s count %d \n",b, c ); -+ -+ switch(*b) { -+ case 'M': -+ setReadMode(b, c); -+ break; -+ case 'B': /* Clear the latch flag of shutter button */ -+ DPRINTK(" clear latch flag of camera's shutter button\n"); -+ sharp_param.CameraStatus[0]='s'; -+ break; -+ case 'Y': /* I don't know how to set Shutter pressed */ -+ DPRINTK(" set latch flag n"); -+ sharp_param.CameraStatus[0]='S'; -+ break; -+ case 'S': /* Camera Image Resolution */ -+ case 'R': /* Donot support Rotation */ -+ DPRINTK(" param %s count %d \n",b, c ); -+ get_options((char *)(b+2), 5, array); -+ if ( array[3] == 512 ) zoom = 2; -+ z_config(cfg, array[1] * zoom , array[2] * zoom ); -+ camif_4fsm_start(cfg); -+ break; -+ case 'C': -+ DPRINTK(" param %s count %d \n",b, c ); -+ DPRINTK(" Start the camera to capture \n"); -+ sharp_param.CameraStatus[2]='C'; -+ camif_4fsm_start(cfg); -+ break; -+ default: -+ printk("Unexpected param %s count %d \n",b, c ); -+ } -+ -+ return c; -+} -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/qt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/qt.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,18 @@ -+/* -+ * SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#ifndef __Z_API_H_ -+#define __Z_API_H_ -+ -+extern ssize_t z_read(struct file *f, char *buf, size_t count, loff_t *pos); -+extern ssize_t z_write(struct file *f, const char *b, size_t c, loff_t *pos); -+ -+ -+ -+#endif -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/s5x532.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/s5x532.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,143 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SMDK2440_S5X532_H_ -+#define _SMDK2440_S5X532_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ // page 5 -+ {0xec,0x05}, -+ {0x08,0x55,0x5}, -+ {0x0a,0x75,0x5}, -+ {0x0c,0x90,0x5}, -+ {0x0e,0x18,0x5}, -+ {0x12,0x09,0x5}, -+ {0x14,0x9d,0x5}, -+ {0x16,0x90,0x5}, -+ {0x1a,0x18,0x5}, -+ {0x1c,0x0c,0x5}, -+ {0x1e,0x09,0x5}, -+ {0x20,0x06,0x5}, -+ {0x22,0x20,0x5}, -+ {0x2a,0x00,0x5}, -+ {0x2d,0x04,0x5}, -+ {0x12,0x24,0x5}, -+ // page 3 -+ {0xec,0x03,0x3}, -+ {0x0c,0x09,0x3}, -+ {0x6c,0x09,0x3}, -+ {0x2b,0x10,0x3}, // momo clock inversion -+ // page 2 -+ {0xec,0x02,0x2}, -+ {0x03,0x09,0x2}, -+ {0x05,0x08,0x2}, -+ {0x06,0x01,0x2}, -+ {0x07,0xf8,0x2}, -+ {0x15,0x25,0x2}, -+ {0x30,0x29,0x2}, -+ {0x36,0x12,0x2}, -+ {0x38,0x04,0x2}, -+ {0x1b,0x77,0x2}, // 24MHz : 0x77, 12MHz : 0x22 -+ {0x1c,0x77,0x2}, // 24MHz : 0x77, 12MHz : 0x22 -+ // page 1 -+ {0xec,0x01,0x1}, -+ {0x00,0x03,0x1}, // -+ {0x0a,0x08,0x1}, // 0x0-QQVGA, 0x06-CIF, 0x02-QCIF, 0x08-VGA, 0x04-QVGA, 0x0a-SXGA -+ {0x0c,0x00,0x1}, // Pattern selectio. 0-CIS, 1-Color bar, 2-Ramp, 3-Blue screen -+ {0x10,0x27,0x1}, -+ // 0x21-ITU-R656(CrYCbY), 0x25-ITU-R601(CrYCbY), 0x26-ITU-R601(YCbYCr) -+ {0x50,0x21,0x1}, // Hblank -+ {0x51,0x00,0x1}, // Hblank -+ {0x52,0xA1,0x1}, // Hblank -+ {0x53,0x02,0x1}, // Hblank -+ {0x54,0x01,0x1}, // Vblank -+ {0x55,0x00,0x1}, // Vblank -+ {0x56,0xE1,0x1}, // Vblank -+ {0x57,0x01,0x1}, // Vblank -+ {0x58,0x21,0x1}, // Hsync -+ {0x59,0x00,0x1}, // Hsync -+ {0x5a,0xA1,0x1}, // Hsync -+ {0x5b,0x02,0x1}, // Hsync -+ {0x5c,0x03,0x1}, // Vref -+ {0x5d,0x00,0x1}, // Vref -+ {0x5e,0x05,0x1}, // Vref -+ {0x5f,0x00,0x1}, // Vref -+ {0x70,0x0E,0x1}, -+ {0x71,0xD6,0x1}, -+ {0x72,0x30,0x1}, -+ {0x73,0xDB,0x1}, -+ {0x74,0x0E,0x1}, -+ {0x75,0xD6,0x1}, -+ {0x76,0x18,0x1}, -+ {0x77,0xF5,0x1}, -+ {0x78,0x0E,0x1}, -+ {0x79,0xD6,0x1}, -+ {0x7a,0x28,0x1}, -+ {0x7b,0xE6,0x1}, -+ {0x50,0x00,0x1}, -+ {0x5c,0x00,0x1}, -+ -+ // page 0 -+ {0xec,0x00,0x0}, -+ {0x79,0x01,0x0}, -+ {0x58,0x90,0x0}, -+ {0x59,0xA0,0x0}, -+ {0x5a,0x50,0x0}, -+ {0x5b,0x70,0x0}, -+ {0x5c,0xD0,0x0}, -+ {0x5d,0xC0,0x0}, -+ {0x5e,0x28,0x0}, -+ {0x5f,0x08,0x0}, -+ {0x50,0x90,0x0}, -+ {0x51,0xA0,0x0}, -+ {0x52,0x50,0x0}, -+ {0x53,0x70,0x0}, -+ {0x54,0xD0,0x0}, -+ {0x55,0xC0,0x0}, -+ {0x56,0x28,0x0}, -+ {0x57,0x00,0x0}, -+ {0x48,0x90,0x0}, -+ {0x49,0xA0,0x0}, -+ {0x4a,0x50,0x0}, -+ {0x4b,0x70,0x0}, -+ {0x4c,0xD0,0x0}, -+ {0x4d,0xC0,0x0}, -+ {0x4e,0x28,0x0}, -+ {0x4f,0x08,0x0}, -+ {0x72,0x82,0x0}, // main clock = 24MHz:0xd2, 16M:0x82, 12M:0x54 -+ {0x75,0x05,0x0} // absolute vertical mirror. junon -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/s5x532_rev36.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/s5x532_rev36.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,208 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SMDK2440_S5X532_H_ -+#define _SMDK2440_S5X532_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ -+ //=============== page0 ===============// -+ {0xec,0x00,0x00}, -+ {0x02,0x00,0x00}, -+ {0x14,0x60,0x00}, -+ {0x15,0x60,0x00}, -+ {0x16,0x60,0x00}, -+ {0x1b,0x20,0x00}, -+ {0x1c,0x20,0x00}, -+ {0x1d,0x20,0x00}, -+ {0x1e,0x20,0x00}, -+ {0x72,0xdc,0x00}, -+ {0x73,0x11,0x00}, -+ {0x76,0x82,0x00}, -+ {0x77,0x90,0x00}, -+ {0x78,0x6c,0x00}, -+ {0x0a,0x02,0x00}, -+ {0x34,0x0d,0x00}, -+ {0x35,0x0a,0x00}, -+ {0x36,0x05,0x00}, -+ {0x37,0x05,0x00}, -+ {0x38,0x06,0x00}, -+ {0x39,0x08,0x00}, -+ {0x3A,0x0d,0x00}, -+ {0x3B,0x0d,0x00}, -+ {0x3C,0x18,0x00}, -+ {0x3D,0xE0,0x00}, -+ {0x3E,0x20,0x00}, -+ {0x66,0x02,0x00}, -+ {0x6c,0x40,0x00}, -+ {0x7c,0x01,0x00}, -+ {0x0D,0x24,0x00}, -+ {0x40,0x1B,0x00}, -+ {0x41,0x4F,0x00}, -+ {0x42,0x24,0x00}, -+ {0x43,0x3E,0x00}, -+ {0x44,0x32,0x00}, -+ {0x45,0x30,0x00}, -+ {0x48,0xa0,0x00}, -+ {0x49,0xd0,0x00}, -+ {0x4A,0x28,0x00}, -+ {0x4B,0x7d,0x00}, -+ {0x4C,0xd0,0x00}, -+ {0x4D,0xe0,0x00}, -+ {0x4E,0x1a,0x00}, -+ {0x4F,0xa0,0x00}, -+ {0x50,0xc0,0x00}, -+ {0x51,0xc0,0x00}, -+ {0x52,0x42,0x00}, -+ {0x53,0x7e,0x00}, -+ {0x54,0xc0,0x00}, -+ {0x55,0xf0,0x00}, -+ {0x56,0x1e,0x00}, -+ {0x57,0xe0,0x00}, -+ {0x58,0xc0,0x00}, -+ {0x59,0xa0,0x00}, -+ {0x5A,0x4a,0x00}, -+ {0x5B,0x7e,0x00}, -+ {0x5C,0xc0,0x00}, -+ {0x5D,0xf0,0x00}, -+ {0x5E,0x2a,0x00}, -+ {0x5F,0x10,0x00}, -+ {0x79,0x00,0x00}, -+ {0x7a,0x00,0x00}, -+ {0xe0,0x0f,0x00}, -+ {0xe3,0x14,0x00}, -+ {0xe5,0x48,0x00}, -+ {0xe7,0x58,0x00}, -+ -+ //=============== page1 ===============// -+ {0xec,0x01,0x01}, -+ {0x10,0x05,0x01}, -+ {0x20,0xde,0x01}, -+ {0x0b,0x06,0x01}, -+ {0x30,0x00,0x01}, -+ {0x31,0x00,0x01}, -+ {0x32,0x00,0x01}, -+ {0x24,0x28,0x01}, -+ {0x25,0x3F,0x01}, -+ {0x26,0x65,0x01}, -+ {0x27,0xA1,0x01}, -+ {0x28,0xFF,0x01}, -+ {0x29,0x96,0x01}, -+ {0x2A,0x85,0x01}, -+ {0x2B,0xFF,0x01}, -+ {0x2C,0x00,0x01}, -+ {0x2D,0x1B,0x01}, -+ {0xB0,0x28,0x01}, -+ {0xB1,0x3F,0x01}, -+ {0xB2,0x65,0x01}, -+ {0xB3,0xA1,0x01}, -+ {0xB4,0xFF,0x01}, -+ {0xB5,0x96,0x01}, -+ {0xB6,0x85,0x01}, -+ {0xB7,0xFF,0x01}, -+ {0xB8,0x00,0x01}, -+ {0xB9,0x1B,0x01}, -+ {0x15,0x15,0x01}, -+ {0x18,0x85,0x01}, -+ {0x1f,0x05,0x01}, -+ {0x87,0x40,0x01}, -+ {0x37,0x60,0x01}, -+ {0x38,0xd5,0x01}, -+ {0x48,0xa0,0x01}, -+ {0x61,0x54,0x01}, -+ {0x62,0x54,0x01}, -+ {0x63,0x14,0x01}, -+ {0x64,0x14,0x01}, -+ {0x6d,0x12,0x01}, -+ {0x78,0x09,0x01}, -+ {0x79,0xD7,0x01}, -+ {0x7A,0x14,0x01}, -+ {0x7B,0xEE,0x01}, -+ -+ //=============== page2 ===============// -+ {0xec,0x02,0x02}, -+ {0x2c,0x76,0x02}, -+ {0x25,0x25,0x02}, -+ {0x27,0x27,0x02}, -+ {0x30,0x29,0x02}, -+ {0x36,0x08,0x02}, -+ {0x38,0x04,0x02}, -+ -+ //=============== page3 ===============// -+ {0xec,0x03,0x03}, -+ {0x08,0x00,0x03}, -+ {0x09,0x33,0x03}, -+ -+ //=============== page4 ===============// -+ {0xec,0x04,0x04}, -+ {0x00,0x21,0x04}, -+ {0x01,0x00,0x04}, -+ {0x02,0x9d,0x04}, -+ {0x03,0x02,0x04}, -+ {0x04,0x04,0x04}, -+ {0x05,0x00,0x04}, -+ {0x06,0x1f,0x04}, -+ {0x07,0x02,0x04}, -+ {0x08,0x21,0x04}, -+ {0x09,0x00,0x04}, -+ {0x0a,0x9d,0x04}, -+ {0x0b,0x02,0x04}, -+ {0x0c,0x04,0x04}, -+ {0x0d,0x00,0x04}, -+ {0x0e,0x20,0x04}, -+ {0x0f,0x02,0x04}, -+ {0x1b,0x3c,0x04}, -+ {0x1c,0x3c,0x04}, -+ -+ //=============== page5 ===============// -+ {0xec,0x05,0x05}, -+ {0x1f,0x00,0x05}, -+ {0x08,0x59,0x05}, -+ {0x0a,0x71,0x05}, -+ {0x1e,0x23,0x05}, -+ {0x0e,0x3c,0x05}, -+ -+ //=============== page7 ===============// -+ {0xec,0x07,0x07}, -+ {0x11,0xfe,0x07}, -+ -+ // added by junon -+ {0xec,0x01,0x07}, -+ {0x10,0x26,0x07}, -+ // 0x21-ITU-R656(CbYCrY), 0x25-ITU-R601(CbYCrY), 0x26-ITU-R601(YCrYCb) -+ -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/sensor.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/sensor.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,20 @@ -+/* -+ * -+ * Copyright (C) 2004 Samsung Electronics -+ * SW.LEE -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __SENSOR_CMD_H_ -+#define __SENSOR_CMD_H_ -+ -+#include "bits.h" -+ -+#define SENSOR_INIT BIT0 -+#define USER_ADD BIT1 -+#define USER_EXIT BIT2 -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/sxga.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/sxga.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,504 @@ -+/* -+ * 2004 (C) Samsung Electronics -+ * SW.LEE -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+ -+#ifndef _SAMSUNG_SXGA_H_ -+#define _SAMSUNG_SXGA_H_ -+ -+ -+#define CHIP_DELAY 0xFF -+ -+typedef struct samsung_t{ -+ unsigned char subaddr; -+ unsigned char value; -+ unsigned char page; -+} s5x532_t; -+ -+s5x532_t s5x532_reg[] = { -+ // page 0 -+ {0xec,0x00,0x0}, -+ {0x0c,0x38,0x0}, -+ {0x0d,0x24,0x0}, -+ {0x13,0x10,0x0}, -+ {0x14,0x10,0x0}, -+ {0x15,0x10,0x0}, -+ {0x16,0x10,0x0}, -+ {0x17,0x20,0x0}, -+ {0x18,0x30,0x0}, -+ {0x19,0x30,0x0}, -+ {0x1a,0x10,0x0}, -+ {0x1b,0x10,0x0}, -+ -+ {0x2d,0x40,0x0}, -+ {0x3e,0x10,0x0}, -+ {0x34,0x0a,0x0}, -+ {0x39,0x04,0x0}, -+ {0x3a,0x02,0x0}, -+ {0x31,0x05,0x0}, -+ -+ {0x40,0x1d,0x0}, -+ {0x41,0x50,0x0}, -+ {0x42,0x24,0x0}, -+ {0x43,0x3f,0x0}, -+ {0x44,0x30,0x0}, -+ {0x45,0x31,0x0}, -+ -+ {0x48,0xa0,0x0}, -+ {0x49,0xc0,0x0}, -+ {0x4a,0x58,0x0}, -+ {0x4b,0x50,0x0}, -+ {0x4c,0xb0,0x0}, -+ {0x4d,0xc0,0x0}, -+ {0x4e,0x30,0x0}, -+ {0x4f,0x20,0x0}, -+ -+ {0x50,0xa0,0x0}, -+ {0x51,0xc0,0x0}, -+ {0x52,0x50,0x0}, -+ {0x53,0x60,0x0}, -+ {0x54,0xb0,0x0}, -+ {0x55,0xc0,0x0}, -+ {0x56,0x20,0x0}, -+ {0x57,0x08,0x0}, -+// {0x72,0x50,0x0}, // Clock 16 -+ {0x72,0x78,0x0}, // Clock 24Mhz -+// {0x72,0xf0,0x0}, // Clock 48Mhz -+ // page 1 -+ {0xec,0x01,0x1}, -+ {0x10,0x17,0x1}, // ITU-R601 -+ /* -+ [3:2] : out_sel -+ 00 : 656 -+ 01 : 601 -+ 10 : RGB -+ 11 : CIS -+ [1] : YC_SEL -+ [0] : CBCR_SEL -+ */ -+ -+ {0x0b,0x06,0x1}, // 6 -+ {0x20,0xa8,0x1}, //b0); // Highlight C Supp 040215 -+ {0x22,0x26,0x1}, //2f); 040225 -+ -+ {0x24,0x08,0x1}, //00); //1F); 040226 -+ {0x25,0x10,0x1}, //10); //34); -+ {0x26,0x40,0x1}, //56); -+ {0x27,0x80,0x1}, //8D); -+ {0x28,0x2c,0x1}, //E7); -+ {0x29,0xd6,0x1}, //7C); -+ {0x2A,0x0c,0x1}, //70); -+ {0x2B,0xFF,0x1}, //FF); -+ {0x2C,0x00,0x1}, //00); -+ {0x2D,0x5f,0x1}, //1B); -+ // -+ {0xB0,0x08,0x1}, //00); //1F); 040226 -+ {0xB1,0x10,0x1}, //10); //34);50 -+ {0xB2,0x40,0x1}, //36); -+ {0xB3,0x80,0x1}, //6D); -+ {0xB4,0x2c,0x1}, //b7); -+ {0xB5,0xd6,0x1}, //7C); -+ {0xB6,0x0c,0x1}, //70); -+ {0xB7,0xFF,0x1}, //FF); -+ {0xB8,0x00,0x1}, //00); -+ {0xB9,0x5f,0x1}, //1B); -+ -+ -+ {0xc2,0x01,0x1}, // shading On -+ {0xc3,0x80,0x1}, -+ {0xc4,0x02,0x1}, -+ {0xc5,0x00,0x1}, -+ {0xc6,0x01,0x1}, -+ {0xc7,0x00,0x1}, -+ {0xc8,0x05,0x1}, -+ {0xc9,0x00,0x1}, -+ {0xca,0x04,0x1}, -+ -+ // shading 5 -+ {0xd0,0xb5,0x1}, -+ {0xd1,0x9c,0x1}, -+ {0xd2,0x8d,0x1}, -+ {0xd3,0x84,0x1}, -+ {0xd4,0x84,0x1}, -+ {0xd5,0x91,0x1}, -+ {0xd6,0xa0,0x1}, -+ {0xd7,0xb5,0x1}, -+ -+ {0xd8,0xc0,0x1}, -+ {0xd9,0xa6,0x1}, -+ {0xda,0x93,0x1}, -+ {0xdb,0x85,0x1}, -+ {0xdc,0x85,0x1}, -+ {0xdd,0x90,0x1}, -+ {0xde,0xa0,0x1}, -+ {0xdf,0xb8,0x1}, -+ -+ // Page 2 -+ {0xec,0x02,0x02}, -+ -+ {0x2d,0x02,0x02}, -+ {0x20,0x13,0x02}, -+ {0x21,0x13,0x2}, -+ {0x22,0x13,0x2}, -+ {0x23,0x13,0x2}, -+ {0x2e,0x85,0x2}, -+ {0x2f,0x34,0x2}, -+ {0x30,0x00,0x2}, -+ {0x28,0x94,0x2}, -+ -+ -+ // page 3 -+ {0xec,0x03,0x03}, -+ {0x10,0x00,0x3}, -+ {0x20,0x00,0x3}, -+ {0x21,0x20,0x3}, -+ {0x22,0x00,0x3}, -+ {0x23,0x00,0x3}, -+ {0x40,0x20,0x3}, -+ {0x41,0x20,0x3}, -+ {0x42,0x20,0x3}, -+ {0x43,0x20,0x3}, -+ {0x60,0x00,0x3}, -+ {0x61,0x00,0x3}, -+ {0x62,0x00,0x3}, -+ {0x63,0x00,0x3}, -+ {0x64,0x04,0x3}, -+ {0x65,0x1C,0x3}, -+ {0x66,0x05,0x3}, -+ {0x67,0x1C,0x3}, -+ {0x68,0x00,0x3}, -+ {0x69,0x2D,0x3}, -+ {0x6a,0x00,0x3}, -+ {0x6b,0x72,0x3}, -+ {0x6c,0x00,0x3}, -+ {0x6d,0x00,0x3}, -+ {0x6e,0x16,0x3}, // 2.38 -+ {0x6f,0x16,0x3}, // 2.38 -+ {0x70,0x00,0x3}, -+ {0x71,0x00,0x3}, -+ {0x72,0x45,0x3}, -+ {0x73,0x00,0x3}, -+ {0x74,0x1C,0x3}, -+ {0x75,0x05,0x3}, -+ -+ {0x80,0x00,0x3}, //for 0.02 _ 44 -+ {0x81,0x00,0x3}, -+ {0x82,0x00,0x3}, -+ {0x83,0x00,0x3}, -+ {0x84,0x04,0x3}, -+ {0x85,0x1c,0x3}, -+ {0x86,0x05,0x3}, -+ {0x87,0x1c,0x3}, -+ {0x88,0x00,0x3}, -+ {0x89,0x2d,0x3}, -+ {0x8a,0x00,0x3}, -+ {0x8b,0xcc,0x3}, -+ {0x8c,0x00,0x3}, -+ {0x8d,0x00,0x3}, -+ {0x8e,0x08,0x3}, -+ {0x8f,0x08,0x3}, -+ {0x90,0x01,0x3}, -+ {0x91,0x00,0x3}, -+ {0x92,0x91,0x3}, -+ {0x93,0x00,0x3}, -+ {0x94,0x88,0x3}, -+ {0x95,0x02,0x3}, -+ -+ -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x3f,0x09,0x04}, // VGA : old board :0x08 , new board ; 0X09 -+ {0x18,0x00,0x04}, // sxga -+ {0x1c,0x41,0x04}, -+ {0x20,0x41,0x04}, // vga center 040215 -+ {0x22,0xc1,0x04},// a1); -+ {0x23,0x02,0x04}, -+ {0x28,0x41,0x04}, -+ {0x2a,0xc1,0x04},// a1); -+ {0x2b,0x02,0x04}, -+ -+ {0x3c,0x0b,0x04}, //f); // vga -+ {0x58,0x11,0x04}, -+ {0x5c,0x14,0x04}, -+ {0x60,0x21,0x04}, -+ {0x61,0x00,0x04}, -+ {0x62,0xB1,0x04}, -+ {0x63,0x02,0x04}, -+ {0x64,0x01,0x04}, -+ {0x65,0x00,0x04}, -+ {0x66,0x01,0x04}, -+ {0x67,0x02,0x04}, -+ {0x68,0x21,0x04}, -+ {0x69,0x00,0x04}, -+ {0x6a,0xB1,0x04}, -+ {0x6b,0x02,0x04}, -+ {0x6c,0x01,0x04}, -+ {0x6d,0x00,0x04}, -+ {0x6e,0x01,0x04}, -+ {0x6f,0x02,0x04}, -+ {0x70,0x2D,0x04}, -+ {0x71,0x00,0x04}, -+ {0x72,0xd3,0x04}, // 14 -+ {0x73,0x05,0x04}, // 15 -+ {0x74,0x1C,0x04}, -+ {0x75,0x05,0x04}, -+ {0x76,0x1b,0x04}, // HendL -+ {0x77,0x0b,0x04}, // HendH -+ {0x78,0x01,0x04}, // 5.00 -+ {0x79,0x80,0x04}, // 5.2a -+ {0x7a,0x33,0x04}, -+ {0x7b,0x00,0x04}, -+ {0x7c,0x38,0x04}, // 5.0e -+ {0x7d,0x03,0x04}, -+ {0x7e,0x00,0x04}, -+ {0x7f,0x0A,0x04}, -+ -+ {0x80,0x2e,0x04}, -+ {0x81,0x00,0x04}, -+ {0x82,0xae,0x04}, -+ {0x83,0x02,0x04}, -+ {0x84,0x00,0x04}, -+ {0x85,0x00,0x04}, -+ {0x86,0x01,0x04}, -+ {0x87,0x02,0x04}, -+ {0x88,0x2e,0x04}, -+ {0x89,0x00,0x04}, -+ {0x8a,0xae,0x04}, -+ {0x8b,0x02,0x04}, -+ {0x8c,0x1c,0x04}, -+ {0x8d,0x00,0x04}, -+ {0x8e,0x04,0x04}, -+ {0x8f,0x02,0x04}, -+ {0x90,0x2d,0x04}, -+ {0x91,0x00,0x04}, -+ {0x92,0xa5,0x04}, -+ {0x93,0x00,0x04}, -+ {0x94,0x88,0x04}, -+ {0x95,0x02,0x04}, -+ {0x96,0xb3,0x04}, -+ {0x97,0x06,0x04}, -+ {0x98,0x01,0x04}, -+ {0x99,0x00,0x04}, -+ {0x9a,0x33,0x04}, -+ {0x9b,0x30,0x04}, -+ {0x9c,0x50,0x04}, -+ {0x9d,0x30,0x04}, -+ {0x9e,0x01,0x04}, -+ {0x9f,0x08,0x04}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x5a,0x22,0x05}, -+ -+ // page 6 -+ {0xec,0x06,0x06}, -+ {0x14,0x1e,0x06}, -+ {0x15,0xb4,0x04}, -+ {0x16,0x25,0x04}, -+ {0x17,0x74,0x04}, -+ -+ {0x10,0x48,0x04}, -+ {0x11,0xa0,0x04}, -+ {0x12,0x40,0x04}, // 040216 AE1 window ÁÙÀÓ -+ {0x13,0x70,0x04}, -+ -+ {0x1a,0x29,0x04}, // 040217 AWB window ÁÙÀÓ -+ {0x30,0x40,0x04}, -+ {0x31,0xa2,0x04}, -+ {0x32,0x50,0x04}, -+ {0x33,0xbc,0x04}, -+ {0x34,0x10,0x04}, -+ {0x35,0xd2,0x04}, -+ {0x36,0x18,0x04}, -+ {0x37,0xf5,0x04}, -+ {0x38,0x10,0x04}, -+ {0x39,0xd3,0x04}, -+ {0x3a,0x1a,0x04}, -+ {0x3b,0xf0,0x04}, -+ -+ // page 7 -+ {0xec,0x07,0x07}, -+ {0x08,0xff,0x7}, -+ {0x38,0x01,0x7}, //07); 040315 -+ {0x39,0x01,0x7}, //02); //4); 040223 040315 -+ {0x11,0xfe,0x7}, //fe); // green -2 040303 -+ {0x2a,0x20,0x7}, -+ {0x2b,0x20,0x7}, -+ {0x2c,0x10,0x7}, -+ {0x2d,0x00,0x7}, -+ {0x2e,0xf0,0x7}, -+ {0x2f,0xd0,0x7}, -+ {0x3a,0xf0,0x7}, -+ {0x23,0x07,0x7}, // for ESD -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x8a,0x04,0x00}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0xe5,0xb0,0x01}, -+ {0xe5,0xb0,0x01}, -+ {0xc2,0x01,0x01}, -+ -+ {0x61,0x7b,0x01}, -+ {0x62,0x7b,0x01}, -+ {0x63,0x1b,0x01}, -+ {0x64,0x1b,0x01}, -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x7e,0x04,0x00}, -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x04,0x02,0x04}, -+ {0x06,0x02,0x04}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0x10,0x05,0x01}, -+ {0x54,0x02,0x01}, -+ {0x56,0x02,0x01}, -+ -+ // page 3 -+ {0xec,0x03,0x03}, -+ {0x0e,0x08,0x03}, -+ {0x0f,0x08,0x03}, -+ -+ // page 4 -+ {0xec,0x04,0x04}, -+ {0x00,0x30,0x04}, -+ {0x0a,0x30,0x04}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x08,0x33,0x05}, -+ -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x02,0x00,0x00}, -+ -+ // page 4 -+//scale out -+ {0xec,0x04,0x04}, -+ {0x02,0x20,0x04}, -+ {0x1c,0x4f,0x04}, -+ -+ // page 1 -+ {0xec,0x01,0x01}, -+ {0x52,0x20,0x01}, -+ -+ // page 5 -+ {0xec,0x05,0x05}, -+ {0x0e,0x4f,0x05}, -+ -+//ae speed -+ // page 0 -+ {0xec,0x00,0x00}, -+ {0x92,0x80,0x00}, -+ {0x93,0x02,0x00}, -+ {0x94,0x04,0x00}, -+ {0x95,0x04,0x00}, -+ {0x96,0x04,0x00}, -+ {0x97,0x04,0x00}, -+ {0x9b,0x47,0x00}, -+ -+ {0xec,0x00,0x00}, -+ {0x40,0x17,0x00}, -+ {0x41,0x4c,0x00}, -+ {0x42,0x1d,0x00}, -+ {0x43,0x3e,0x00}, -+ {0x44,0x2a,0x00}, -+ {0x45,0x2d,0x00}, -+ -+ {0xec,0x01,0x01}, -+ {0x20,0xd0,0x01}, //high light color reference -+ -+ {0xec,0x00,0x00}, -+ {0x7e,0x00,0x00}, -+ {0x73,0x11,0x00}, // 41 -+ {0x78,0x78,0x00}, -+ -+ {0xec,0x07,0x07}, -+ {0x1b,0x3e,0x07}, -+ -+ {0xec,0x00,0x00}, -+ {0x48,0xA0,0x00}, //s48C0 -+ {0x49,0xB0,0x00}, //s49B0 -+ {0x4a,0x30,0x00}, //s4a20 -+ {0x4b,0x70,0x00}, //s4b70 -+ {0x4c,0xD0,0x00}, //s4cA0 -+ {0x4d,0xB0,0x00}, //s4dB0 -+ {0x4e,0x30,0x00}, //s4e30 -+ {0x4f,0xF0,0x00}, //s4fF0 -+ {0x50,0xA0,0x00}, //s50D0 -+ {0x51,0xB0,0x00}, //s51B0 -+ {0x52,0x25,0x00}, //s5210 -+ {0x53,0x70,0x00}, //s5370 -+ {0x54,0xD0,0x00}, //s5490 -+ {0x55,0xD0,0x00}, //s55B0 -+ {0x56,0x3A,0x00}, //s5640 -+ {0x57,0xD0,0x00}, //s57D0 -+ {0x58,0xA0,0x00}, //s58D0 -+ {0x59,0xA0,0x00}, //s59B0 -+ {0x5a,0x32,0x00}, //s5a0A -+ {0x5b,0x7A,0x00}, //s5b7A -+ {0x5c,0xB0,0x00}, //s5c90 -+ {0x5d,0xC0,0x00}, //s5dC0 -+ {0x5e,0x3E,0x00}, //s5e4A -+ {0x5f,0xfa,0x00}, //s5fD0 -+ -+ // gamma -+ {0xec,0x01,0x01}, -+ {0x24,0x31,0x01}, -+ {0x25,0x4C,0x01}, -+ {0x26,0x75,0x01}, -+ {0x27,0xB5,0x01}, -+ {0x28,0x17,0x01}, -+ {0x29,0xAE,0x01}, -+ {0x2A,0x97,0x01}, -+ {0x2B,0xFF,0x01}, -+ {0x2C,0x00,0x01}, -+ {0x2D,0x5B,0x01}, -+ -+ {0xB0,0x31,0x01}, -+ {0xB1,0x4C,0x01}, -+ {0xB2,0x75,0x01}, -+ {0xB3,0xB5,0x01}, -+ {0xB4,0x17,0x01}, -+ {0xB5,0xAE,0x01}, -+ {0xB6,0x97,0x01}, -+ {0xB7,0xFF,0x01}, -+ {0xB8,0x00,0x01}, -+ {0xB9,0x5B,0x01}, -+ -+ {0xec,0x00,0x00}, -+ {0x77,0xb0,0x00}, -+ {0x39,0x06,0x00}, -+ {0x3a,0x08,0x00}, -+ -+}; -+ -+ -+#define S5X532_INIT_REGS (sizeof(s5x532_reg)/sizeof(s5x532_reg[0])) -+#define S5X532_RISC_REGS 0xEB -+#define S5X532_ISP_REGS 0xFB /* S5C7323X */ -+#define S5X532_CIS_REGS 0x2F /* S5K437LA03 */ -+ -+ -+#define PAGE_ADDRESS 0xEC -+ -+//#define S5X532_REGS (S5X532_RISC_REGS+S5X532_ISP_REGS+S5X532_CIS_REGS) -+#define S5X532_REGS (0x1000) -+ -+ -+ -+#endif -+ -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/userapp.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/userapp.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* -+ Character Driver API Interface -+ -+ Copyright (C) 2003 Samsung Electronics (SW.LEE: hitchcar@samsung.com) -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+*/ -+ -+#ifndef __FIMC20_CAMIF_USR_APP_H_ -+#define __FIMC20_CAMIF_USR_APP_H_ -+ -+ -+/* -+ * IOCTL Command for Character Driver -+ */ -+ -+#define CMD_CAMERA_INIT 0x23 -+/* Test Application Usage */ -+typedef struct { -+ int src_x; -+ int src_y; -+ int dst_x; -+ int dst_y; -+ int bpp; -+ int flip; -+} camif_param_t; -+ -+ -+ -+#endif -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/v4l2_api.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/v4l2_api.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,311 @@ -+/* -+ * . 2004-01-03: SW.LEE -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License 2. See the file COPYING in the main directory of this archive -+ * for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "camif.h" -+#include "videodev.h" -+ -+/* -+ Codec_formats/Preview_format[0] must be same to initial value of -+ preview_init_param/codec_init_param -+*/ -+ -+const struct v4l2_fmtdesc codec_formats[] = { -+ { -+ .index = 0, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PLANAR, -+ .description = "4:2:2, planar, Y-Cb-Cr", -+ .pixelformat = V4L2_PIX_FMT_YUV422P, -+ -+ },{ -+ .index = 1, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PLANAR, -+ .name = "4:2:0, planar, Y-Cb-Cr", -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ } -+}; -+ -+ -+/* Todo -+ FIMC V4L2_PIX_FMT_RGB565 is not same to that of V4L2spec -+ and so we need image convert to FIMC V4l2_PIX_FMT_RGB565. -+*/ -+const struct v4l2_fmtdesc preview_formats[] = { -+ { -+ .index = 1, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+ .description = "16 bpp RGB, le", -+ .fourcc = V4L2_PIX_FMT_RGB565, -+// .flags = FORMAT_FLAGS_PACKED, -+ }, -+ { -+ .index = 0, -+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, -+// .flags = FORMAT_FLAGS_PACKED, -+ .description = "32 bpp RGB, le", -+ .fourcc = V4L2_PIX_FMT_BGR32, -+ } -+} -+ -+#define NUM_F ARRARY_SIZE(preview_formats) -+ -+ -+/* -+ * This function and v4l2 structure made for V4L2 API functions -+ * App <--> v4l2 <--> logical param <--> hardware -+ */ -+static int camif_get_v4l2(camif_cfg_t *cfg) -+{ -+ return 0; -+} -+ -+ -+/* -+** Gives the depth of a video4linux2 fourcc aka pixel format in bits. -+*/ -+static int pixfmt2depth(int pixfmt,int *fmtptr) -+{ -+ int fmt, depth; -+ -+ switch (pixfmt) { -+ case V4L2_PIX_FMT_RGB565: -+ case V4L2_PIX_FMT_RGB565X: -+ fmt = CAMIF_RGB_16; -+ depth = 16; -+ break; -+ case V4L2_PIX_FMT_BGR24: /* Not tested */ -+ case V4L2_PIX_FMT_RGB24: -+ fmt = CAMIF_RGB_24; -+ depth = 24; -+ break; -+ case V4L2_PIX_FMT_BGR32: -+ case V4L2_PIX_FMT_RGB32: -+ fmt = CAMIF_RGB_24; -+ depth 32; -+ break; -+ case V4L2_PIX_FMT_GREY: /* Not tested */ -+ fmt = CAMIF_OUT_YCBCR420; -+ depth = 8; -+ break; -+ case V4L2_PIX_FMT_YUYV: -+ case V4L2_PIX_FMT_UYVY: -+ case V4L2_PIX_FMT_YUV422P: -+ fmt = CAMIF_OUT_YCBCR422; -+ depth = 16; -+ break; -+ case V4L2_PIX_FMT_YUV420: -+ fmt = CAMIF_OUT_YCBCR420; -+ depth = 12; -+ break; -+ } -+ if (fmtptr) *fmtptr = fmt; -+ return depth; -+} -+ -+ -+ -+static int camif_s_v4l2(camif_cfg_t *cfg) -+{ -+ int num = cfg->v2.used_fmt; -+ -+ if ( !(cfg->v2.status&CAMIF_V4L2_INIT)) { -+ int depth; -+ int fourcc = v2.fmtdesc[num].pixelformat; -+ -+ /* To define v4l2_fmtsdesc */ -+ if (cfg->dma_type == CAMIF_CODEC) -+ cfg->v2->fmtdesc = codec_formats; -+ else -+ cfg->v2->fmtdesc = preview_formats; -+ -+ /* To define v4l2_format used currently */ -+ cfg->v2.fmt.width = cfg->target_x; -+ cfg->v2.fmt.height = cfg->target_y; -+ cfg->v2.fmt.field = V4L2_FIELD_NONE; -+ cfg->v2.fmt.pixelformat = fourcc; -+ depth = pixfmt2depth(fourcc,NULL); -+ cfg->v2.fmt.bytesperline= cfg->v2.fmt.width*depth >> 3; -+ cfg->v2.fmt.sizeimage = -+ cfg->v2.fmt.height * cfg->v2.fmt.bytesperline; -+ -+ /* To define v4l2_input */ -+ cfg->v2.input.index = 0; -+ if (cfg->dma_type == CAMIF_CODEC) -+ snprintf(cfg->v2.input.name, 31, "CAMIF CODEC"); -+ else -+ snprintf(cfg->v2.input.name, 31, "CAMIF PREVIEW"); -+ cfg->v2.input.type = V4L2_INPUT_TYPE_CAMERA; -+ -+ /* Write the Status of v4l2 machine */ -+ cfg->v2.status |= CAMIF_V4L2_INIT; -+ } -+ return 0; -+} -+ -+ -+static int camif_g_fmt(camif_cfg_t *cfg, struct v4l2_format *f) -+{ -+ int size = sizeof(struct v4l2_pix_format); -+ -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ memset(&f->fmt.pix,0,size); -+ memcpy(&f->fmt.pix,&cfg->v2.fmt,size); -+ return 0; -+ default: -+ return -EINVAL; -+ } -+} -+ -+ -+/* Copy v4l2 parameter into other element of camif_cfg_t */ -+static int camif_s_try(camif_cfg_t *cfg, int f) -+{ -+ int fmt; -+ cfg->target_x = cfg->v2.fmt.width; -+ cfg->target_y = cfg->v2.fmt.height; -+ pixfmt2depth(cfg->v2.fmt.pixelformat,&fmt); -+ cfg->fmt = fmt; -+ camif_dynamic_conf(cfg); -+} -+ -+ -+static int camif_s_fmt(camif_cfg_t *cfg, struct v4l2_format *f) -+{ -+ int retval; -+ -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ { -+ /* update our state informations */ -+// down(&fh->cap.lock); -+ cfg->v2.fmt = f->pix; -+ cfg->v2.status |= CAMIF_v4L2_DIRTY; -+ camif_dynamic_conf(cfg); -+ cfg->v2.status &= ~CAMIF_v4L2_DIRTY; /* dummy ? */ -+// up(&fh->cap.lock); -+ -+ return 0; -+ } -+ default: -+ return -EINVAL; -+ } -+ -+} -+ -+/* Refer ioctl of videodeX.c and bttv-driver.c */ -+int camif_do_ioctl -+(struct inode *inode, struct file *file,unsigned int cmd, void * arg) -+{ -+ camif_cfg_t *cfg = file->private_data; -+ int ret = 0; -+ -+ switch (cmd) { -+ case VIDIOC_QUERYCAP: -+ { -+ struct v4l2_capability *cap = arg; -+ -+ strcpy(cap->driver,"Fimc Camera"); -+ strlcpy(cap->card,cfg->v->name,sizeof(cap->card)); -+ sprintf(cap->bus_info,"FIMC 2.0 AHB Bus"); -+ cap->version = 0; -+ cap->capabilities = -+ V4L2_CAP_VIDEO_CAPTURE |V4L2_CAP_READWRITE; -+ return 0; -+ } -+ case VIDIOC_G_FMT: -+ { -+ struct v4l2_format *f = arg; -+ return camif_g_fmt(cfg,f); -+ } -+ case VIDIOC_S_FMT: -+ { -+ struct v4l2_format *f = arg; -+ return camif_s_fmt(cfg,f); -+ } -+ -+ case VIDIOC_ENUM_FMT: -+ { -+ struct v4l2_fmtdesc *f = arg; -+ enum v4l2_buf_type type = f->type; -+ int index = f->index; -+ -+ if (index >= NUM_F) -+ return -EINVAL; -+ switch (f->type) { -+ case V4L2_BUF_TYPE_VIDEO_CAPTURE: -+ break; -+ case V4L2_BUF_TYPE_VIDEO_OVERLAY: -+ case V4L2_BUF_TYPE_VBI_CAPTURE: -+ default: -+ return -EINVAL; -+ } -+ memset(f,0,sizeof(*f)); -+ memcpy(f,cfg->v2.fmtdesc+index,sizeof(*f)); -+ return 0; -+ } -+ case VIDIOC_G_INPUT: -+ { -+ u32 *i = arg; -+ *i = cfg->v2.input; -+ return 0; -+ } -+ case VIDIOC_S_INPUT: -+ { -+ int index = *((int *)arg); -+ if (index != 0) -+ return -EINVAL; -+ cfg->v2.input.index = index; -+ return 0; -+ } -+ -+ default: -+ return -ENOIOCTLCMD; /* errno.h */ -+ } /* End of Switch */ -+ -+ -+} -+ -+ -+ -+ -+ -+ -+ -+/* -+ * Local variables: -+ * tab-width: 8 -+ * c-indent-level: 8 -+ * c-basic-offset: 8 -+ * c-set-style: "K&R" -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev2.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev2.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,938 @@ -+#ifndef __LINUX_VIDEODEV2_H -+#define __LINUX_VIDEODEV2_H -+/* -+ * Video for Linux Two -+ * -+ * Header file for v4l or V4L2 drivers and applications, for -+ * Linux kernels 2.2.x or 2.4.x. -+ * -+ * See http://bytesex.org/v4l/ for API specs and other -+ * v4l2 documentation. -+ * -+ * Author: Bill Dirks -+ * Justin Schoeman -+ * et al. -+ */ -+#ifdef __KERNEL__ -+#include /* need struct timeval */ -+#endif -+ -+/* -+ * M I S C E L L A N E O U S -+ */ -+ -+/* Four-character-code (FOURCC) */ -+#define v4l2_fourcc(a,b,c,d)\ -+ (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) -+ -+/* -+ * E N U M S -+ */ -+enum v4l2_field { -+ V4L2_FIELD_ANY = 0, /* driver can choose from none, -+ top, bottom, interlaced -+ depending on whatever it thinks -+ is approximate ... */ -+ V4L2_FIELD_NONE = 1, /* this device has no fields ... */ -+ V4L2_FIELD_TOP = 2, /* top field only */ -+ V4L2_FIELD_BOTTOM = 3, /* bottom field only */ -+ V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ -+ V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one -+ buffer, top-bottom order */ -+ V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ -+ V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into -+ separate buffers */ -+}; -+#define V4L2_FIELD_HAS_TOP(field) \ -+ ((field) == V4L2_FIELD_TOP ||\ -+ (field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+#define V4L2_FIELD_HAS_BOTTOM(field) \ -+ ((field) == V4L2_FIELD_BOTTOM ||\ -+ (field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+#define V4L2_FIELD_HAS_BOTH(field) \ -+ ((field) == V4L2_FIELD_INTERLACED ||\ -+ (field) == V4L2_FIELD_SEQ_TB ||\ -+ (field) == V4L2_FIELD_SEQ_BT) -+ -+enum v4l2_buf_type { -+ V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, -+ V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, -+ V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, -+ V4L2_BUF_TYPE_VBI_CAPTURE = 4, -+ V4L2_BUF_TYPE_VBI_OUTPUT = 5, -+ V4L2_BUF_TYPE_PRIVATE = 0x80, -+}; -+ -+enum v4l2_ctrl_type { -+ V4L2_CTRL_TYPE_INTEGER = 1, -+ V4L2_CTRL_TYPE_BOOLEAN = 2, -+ V4L2_CTRL_TYPE_MENU = 3, -+ V4L2_CTRL_TYPE_BUTTON = 4, -+}; -+ -+enum v4l2_tuner_type { -+ V4L2_TUNER_RADIO = 1, -+ V4L2_TUNER_ANALOG_TV = 2, -+}; -+ -+enum v4l2_memory { -+ V4L2_MEMORY_MMAP = 1, -+ V4L2_MEMORY_USERPTR = 2, -+ V4L2_MEMORY_OVERLAY = 3, -+}; -+ -+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ -+enum v4l2_colorspace { -+ /* ITU-R 601 -- broadcast NTSC/PAL */ -+ V4L2_COLORSPACE_SMPTE170M = 1, -+ -+ /* 1125-Line (US) HDTV */ -+ V4L2_COLORSPACE_SMPTE240M = 2, -+ -+ /* HD and modern captures. */ -+ V4L2_COLORSPACE_REC709 = 3, -+ -+ /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ -+ V4L2_COLORSPACE_BT878 = 4, -+ -+ /* These should be useful. Assume 601 extents. */ -+ V4L2_COLORSPACE_470_SYSTEM_M = 5, -+ V4L2_COLORSPACE_470_SYSTEM_BG = 6, -+ -+ /* I know there will be cameras that send this. So, this is -+ * unspecified chromaticities and full 0-255 on each of the -+ * Y'CbCr components -+ */ -+ V4L2_COLORSPACE_JPEG = 7, -+ -+ /* For RGB colourspaces, this is probably a good start. */ -+ V4L2_COLORSPACE_SRGB = 8, -+}; -+ -+enum v4l2_priority { -+ V4L2_PRIORITY_UNSET = 0, /* not initialized */ -+ V4L2_PRIORITY_BACKGROUND = 1, -+ V4L2_PRIORITY_INTERACTIVE = 2, -+ V4L2_PRIORITY_RECORD = 3, -+ V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, -+}; -+ -+struct v4l2_rect { -+ __s32 left; -+ __s32 top; -+ __s32 width; -+ __s32 height; -+}; -+ -+struct v4l2_fract { -+ __u32 numerator; -+ __u32 denominator; -+}; -+ -+/* -+ * D R I V E R C A P A B I L I T I E S -+ */ -+struct v4l2_capability -+{ -+ __u8 driver[16]; /* i.e. "bttv" */ -+ __u8 card[32]; /* i.e. "Hauppauge WinTV" */ -+ __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */ -+ __u32 version; /* should use KERNEL_VERSION() */ -+ __u32 capabilities; /* Device capabilities */ -+ __u32 reserved[4]; -+}; -+ -+/* Values for 'capabilities' field */ -+#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ -+#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ -+#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ -+#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a VBI capture device */ -+#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a VBI output device */ -+#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ -+ -+#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ -+#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ -+#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ -+ -+#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ -+#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ -+#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ -+ -+/* -+ * V I D E O I M A G E F O R M A T -+ */ -+ -+struct v4l2_pix_format -+{ -+ __u32 width; -+ __u32 height; -+ __u32 pixelformat; -+ enum v4l2_field field; -+ __u32 bytesperline; /* for padding, zero if unused */ -+ __u32 sizeimage; -+ enum v4l2_colorspace colorspace; -+ __u32 priv; /* private data, depends on pixelformat */ -+}; -+ -+/* Pixel format FOURCC depth Description */ -+#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R','G','B','1') /* 8 RGB-3-3-2 */ -+#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R','G','B','O') /* 16 RGB-5-5-5 */ -+#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R','G','B','P') /* 16 RGB-5-6-5 */ -+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16 RGB-5-5-5 BE */ -+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16 RGB-5-6-5 BE */ -+#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B','G','R','3') /* 24 BGR-8-8-8 */ -+#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R','G','B','3') /* 24 RGB-8-8-8 */ -+#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B','G','R','4') /* 32 BGR-8-8-8-8 */ -+#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R','G','B','4') /* 32 RGB-8-8-8-8 */ -+#define V4L2_PIX_FMT_GREY v4l2_fourcc('G','R','E','Y') /* 8 Greyscale */ -+#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y','V','U','9') /* 9 YVU 4:1:0 */ -+#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y','V','1','2') /* 12 YVU 4:2:0 */ -+#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y','U','Y','V') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U','Y','V','Y') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16 YVU422 planar */ -+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16 YVU411 planar */ -+#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y','4','1','P') /* 12 YUV 4:1:1 */ -+ -+/* two planes -- one Y, one Cr + Cb interleaved */ -+#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N','V','1','2') /* 12 Y/CbCr 4:2:0 */ -+#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N','V','2','1') /* 12 Y/CrCb 4:2:0 */ -+ -+/* The following formats are not defined in the V4L2 specification */ -+#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y','U','V','9') /* 9 YUV 4:1:0 */ -+#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y','U','1','2') /* 12 YUV 4:2:0 */ -+#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */ -+#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */ -+ -+/* compressed formats */ -+#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M','J','P','G') /* Motion-JPEG */ -+#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J','P','E','G') /* JFIF JPEG */ -+#define V4L2_PIX_FMT_DV v4l2_fourcc('d','v','s','d') /* 1394 */ -+#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M','P','E','G') /* MPEG */ -+ -+/* Vendor-specific formats */ -+#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W','N','V','A') /* Winnov hw compress */ -+ -+/* -+ * F O R M A T E N U M E R A T I O N -+ */ -+struct v4l2_fmtdesc -+{ -+ __u32 index; /* Format number */ -+ enum v4l2_buf_type type; /* buffer type */ -+ __u32 flags; -+ __u8 description[32]; /* Description string */ -+ __u32 pixelformat; /* Format fourcc */ -+ __u32 reserved[4]; -+}; -+ -+#define V4L2_FMT_FLAG_COMPRESSED 0x0001 -+ -+ -+/* -+ * T I M E C O D E -+ */ -+struct v4l2_timecode -+{ -+ __u32 type; -+ __u32 flags; -+ __u8 frames; -+ __u8 seconds; -+ __u8 minutes; -+ __u8 hours; -+ __u8 userbits[4]; -+}; -+ -+/* Type */ -+#define V4L2_TC_TYPE_24FPS 1 -+#define V4L2_TC_TYPE_25FPS 2 -+#define V4L2_TC_TYPE_30FPS 3 -+#define V4L2_TC_TYPE_50FPS 4 -+#define V4L2_TC_TYPE_60FPS 5 -+ -+/* Flags */ -+#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ -+#define V4L2_TC_FLAG_COLORFRAME 0x0002 -+#define V4L2_TC_USERBITS_field 0x000C -+#define V4L2_TC_USERBITS_USERDEFINED 0x0000 -+#define V4L2_TC_USERBITS_8BITCHARS 0x0008 -+/* The above is based on SMPTE timecodes */ -+ -+ -+/* -+ * C O M P R E S S I O N P A R A M E T E R S -+ */ -+#if 0 -+/* ### generic compression settings don't work, there is too much -+ * ### codec-specific stuff. Maybe reuse that for MPEG codec settings -+ * ### later ... */ -+struct v4l2_compression -+{ -+ __u32 quality; -+ __u32 keyframerate; -+ __u32 pframerate; -+ __u32 reserved[5]; -+ -+/* what we'll need for MPEG, extracted from some postings on -+ the v4l list (Gert Vervoort, PlasmaJohn). -+ -+system stream: -+ - type: elementary stream(ES), packatised elementary stream(s) (PES) -+ program stream(PS), transport stream(TS) -+ - system bitrate -+ - PS packet size (DVD: 2048 bytes, VCD: 2324 bytes) -+ - TS video PID -+ - TS audio PID -+ - TS PCR PID -+ - TS system information tables (PAT, PMT, CAT, NIT and SIT) -+ - (MPEG-1 systems stream vs. MPEG-2 program stream (TS not supported -+ by MPEG-1 systems) -+ -+audio: -+ - type: MPEG (+Layer I,II,III), AC-3, LPCM -+ - bitrate -+ - sampling frequency (DVD: 48 Khz, VCD: 44.1 KHz, 32 kHz) -+ - Trick Modes? (ff, rew) -+ - Copyright -+ - Inverse Telecine -+ -+video: -+ - picturesize (SIF, 1/2 D1, 2/3 D1, D1) and PAL/NTSC norm can be set -+ through excisting V4L2 controls -+ - noise reduction, parameters encoder specific? -+ - MPEG video version: MPEG-1, MPEG-2 -+ - GOP (Group Of Pictures) definition: -+ - N: number of frames per GOP -+ - M: distance between reference (I,P) frames -+ - open/closed GOP -+ - quantiser matrix: inter Q matrix (64 bytes) and intra Q matrix (64 bytes) -+ - quantiser scale: linear or logarithmic -+ - scanning: alternate or zigzag -+ - bitrate mode: CBR (constant bitrate) or VBR (variable bitrate). -+ - target video bitrate for CBR -+ - target video bitrate for VBR -+ - maximum video bitrate for VBR - min. quantiser value for VBR -+ - max. quantiser value for VBR -+ - adaptive quantisation value -+ - return the number of bytes per GOP or bitrate for bitrate monitoring -+ -+*/ -+}; -+#endif -+ -+struct v4l2_jpegcompression -+{ -+ int quality; -+ -+ int APPn; /* Number of APP segment to be written, -+ * must be 0..15 */ -+ int APP_len; /* Length of data in JPEG APPn segment */ -+ char APP_data[60]; /* Data in the JPEG APPn segment. */ -+ -+ int COM_len; /* Length of data in JPEG COM segment */ -+ char COM_data[60]; /* Data in JPEG COM segment */ -+ -+ __u32 jpeg_markers; /* Which markers should go into the JPEG -+ * output. Unless you exactly know what -+ * you do, leave them untouched. -+ * Inluding less markers will make the -+ * resulting code smaller, but there will -+ * be fewer aplications which can read it. -+ * The presence of the APP and COM marker -+ * is influenced by APP_len and COM_len -+ * ONLY, not by this property! */ -+ -+#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -+#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -+#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -+#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ -+#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will -+ * allways use APP0 */ -+}; -+ -+ -+/* -+ * M E M O R Y - M A P P I N G B U F F E R S -+ */ -+struct v4l2_requestbuffers -+{ -+ __u32 count; -+ enum v4l2_buf_type type; -+ enum v4l2_memory memory; -+ __u32 reserved[2]; -+}; -+ -+struct v4l2_buffer -+{ -+ __u32 index; -+ enum v4l2_buf_type type; -+ __u32 bytesused; -+ __u32 flags; -+ enum v4l2_field field; -+ struct timeval timestamp; -+ struct v4l2_timecode timecode; -+ __u32 sequence; -+ -+ /* memory location */ -+ enum v4l2_memory memory; -+ union { -+ __u32 offset; -+ unsigned long userptr; -+ } m; -+ __u32 length; -+ -+ __u32 reserved[2]; -+}; -+ -+/* Flags for 'flags' field */ -+#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -+#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -+#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -+#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -+#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -+#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ -+#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -+ -+/* -+ * O V E R L A Y P R E V I E W -+ */ -+struct v4l2_framebuffer -+{ -+ __u32 capability; -+ __u32 flags; -+/* FIXME: in theory we should pass something like PCI device + memory -+ * region + offset instead of some physical address */ -+ void* base; -+ struct v4l2_pix_format fmt; -+}; -+/* Flags for the 'capability' field. Read only */ -+#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 -+#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 -+#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 -+#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 -+/* Flags for the 'flags' field. */ -+#define V4L2_FBUF_FLAG_PRIMARY 0x0001 -+#define V4L2_FBUF_FLAG_OVERLAY 0x0002 -+#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 -+ -+struct v4l2_clip -+{ -+ struct v4l2_rect c; -+ struct v4l2_clip *next; -+}; -+ -+struct v4l2_window -+{ -+ struct v4l2_rect w; -+ enum v4l2_field field; -+ __u32 chromakey; -+ struct v4l2_clip *clips; -+ __u32 clipcount; -+ void *bitmap; -+}; -+ -+ -+/* -+ * C A P T U R E P A R A M E T E R S -+ */ -+struct v4l2_captureparm -+{ -+ __u32 capability; /* Supported modes */ -+ __u32 capturemode; /* Current mode */ -+ struct v4l2_fract timeperframe; /* Time per frame in .1us units */ -+ __u32 extendedmode; /* Driver-specific extensions */ -+ __u32 readbuffers; /* # of buffers for read */ -+ __u32 reserved[4]; -+}; -+/* Flags for 'capability' and 'capturemode' fields */ -+#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ -+#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ -+ -+struct v4l2_outputparm -+{ -+ __u32 capability; /* Supported modes */ -+ __u32 outputmode; /* Current mode */ -+ struct v4l2_fract timeperframe; /* Time per frame in seconds */ -+ __u32 extendedmode; /* Driver-specific extensions */ -+ __u32 writebuffers; /* # of buffers for write */ -+ __u32 reserved[4]; -+}; -+ -+/* -+ * I N P U T I M A G E C R O P P I N G -+ */ -+ -+struct v4l2_cropcap { -+ enum v4l2_buf_type type; -+ struct v4l2_rect bounds; -+ struct v4l2_rect defrect; -+ struct v4l2_fract pixelaspect; -+}; -+ -+struct v4l2_crop { -+ enum v4l2_buf_type type; -+ struct v4l2_rect c; -+}; -+ -+/* -+ * A N A L O G V I D E O S T A N D A R D -+ */ -+ -+typedef __u64 v4l2_std_id; -+ -+/* one bit for each */ -+#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) -+#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) -+#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) -+#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) -+#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) -+#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) -+#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) -+#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) -+ -+#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) -+#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) -+#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) -+#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) -+ -+#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) -+#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) -+ -+#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) -+#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) -+#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) -+#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) -+#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) -+#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) -+#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) -+ -+/* ATSC/HDTV */ -+#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) -+#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) -+ -+/* some common needed stuff */ -+#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ -+ V4L2_STD_PAL_B1 |\ -+ V4L2_STD_PAL_G) -+#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ -+ V4L2_STD_PAL_D1 |\ -+ V4L2_STD_PAL_K) -+#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ -+ V4L2_STD_PAL_DK |\ -+ V4L2_STD_PAL_H |\ -+ V4L2_STD_PAL_I) -+#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ -+ V4L2_STD_NTSC_M_JP) -+#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ -+ V4L2_STD_SECAM_D |\ -+ V4L2_STD_SECAM_G |\ -+ V4L2_STD_SECAM_H |\ -+ V4L2_STD_SECAM_K |\ -+ V4L2_STD_SECAM_K1 |\ -+ V4L2_STD_SECAM_L) -+ -+#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ -+ V4L2_STD_PAL_60 |\ -+ V4L2_STD_NTSC) -+#define V4L2_STD_625_50 (V4L2_STD_PAL |\ -+ V4L2_STD_PAL_N |\ -+ V4L2_STD_PAL_Nc |\ -+ V4L2_STD_SECAM) -+ -+#define V4L2_STD_UNKNOWN 0 -+#define V4L2_STD_ALL (V4L2_STD_525_60 |\ -+ V4L2_STD_625_50) -+ -+struct v4l2_standard -+{ -+ __u32 index; -+ v4l2_std_id id; -+ __u8 name[24]; -+ struct v4l2_fract frameperiod; /* Frames, not fields */ -+ __u32 framelines; -+ __u32 reserved[4]; -+}; -+ -+ -+/* -+ * V I D E O I N P U T S -+ */ -+struct v4l2_input -+{ -+ __u32 index; /* Which input */ -+ __u8 name[32]; /* Label */ -+ __u32 type; /* Type of input */ -+ __u32 audioset; /* Associated audios (bitfield) */ -+ __u32 tuner; /* Associated tuner */ -+ v4l2_std_id std; -+ __u32 status; -+ __u32 reserved[4]; -+}; -+/* Values for the 'type' field */ -+#define V4L2_INPUT_TYPE_TUNER 1 -+#define V4L2_INPUT_TYPE_CAMERA 2 -+ -+/* field 'status' - general */ -+#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ -+#define V4L2_IN_ST_NO_SIGNAL 0x00000002 -+#define V4L2_IN_ST_NO_COLOR 0x00000004 -+ -+/* field 'status' - analog */ -+#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ -+#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ -+ -+/* field 'status' - digital */ -+#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ -+#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ -+#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ -+ -+/* field 'status' - VCR and set-top box */ -+#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ -+#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ -+#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ -+ -+/* -+ * V I D E O O U T P U T S -+ */ -+struct v4l2_output -+{ -+ __u32 index; /* Which output */ -+ __u8 name[32]; /* Label */ -+ __u32 type; /* Type of output */ -+ __u32 audioset; /* Associated audios (bitfield) */ -+ __u32 modulator; /* Associated modulator */ -+ v4l2_std_id std; -+ __u32 reserved[4]; -+}; -+/* Values for the 'type' field */ -+#define V4L2_OUTPUT_TYPE_MODULATOR 1 -+#define V4L2_OUTPUT_TYPE_ANALOG 2 -+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 -+ -+/* -+ * C O N T R O L S -+ */ -+struct v4l2_control -+{ -+ __u32 id; -+ __s32 value; -+}; -+ -+/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ -+struct v4l2_queryctrl -+{ -+ __u32 id; -+ enum v4l2_ctrl_type type; -+ __u8 name[32]; /* Whatever */ -+ __s32 minimum; /* Note signedness */ -+ __s32 maximum; -+ __s32 step; -+ __s32 default_value; -+ __u32 flags; -+ __u32 reserved[2]; -+}; -+ -+/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ -+struct v4l2_querymenu -+{ -+ __u32 id; -+ __u32 index; -+ __u8 name[32]; /* Whatever */ -+ __u32 reserved; -+}; -+ -+/* Control flags */ -+#define V4L2_CTRL_FLAG_DISABLED 0x0001 -+#define V4L2_CTRL_FLAG_GRABBED 0x0002 -+ -+/* Control IDs defined by V4L2 */ -+#define V4L2_CID_BASE 0x00980900 -+/* IDs reserved for driver specific controls */ -+#define V4L2_CID_PRIVATE_BASE 0x08000000 -+ -+#define V4L2_CID_BRIGHTNESS (V4L2_CID_BASE+0) -+#define V4L2_CID_CONTRAST (V4L2_CID_BASE+1) -+#define V4L2_CID_SATURATION (V4L2_CID_BASE+2) -+#define V4L2_CID_HUE (V4L2_CID_BASE+3) -+#define V4L2_CID_AUDIO_VOLUME (V4L2_CID_BASE+5) -+#define V4L2_CID_AUDIO_BALANCE (V4L2_CID_BASE+6) -+#define V4L2_CID_AUDIO_BASS (V4L2_CID_BASE+7) -+#define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) -+#define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) -+#define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) -+#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) -+#define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) -+#define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) -+#define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) -+#define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) -+#define V4L2_CID_GAMMA (V4L2_CID_BASE+16) -+#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* ? Not sure */ -+#define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) -+#define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) -+#define V4L2_CID_GAIN (V4L2_CID_BASE+19) -+#define V4L2_CID_HFLIP (V4L2_CID_BASE+20) -+#define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -+#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -+#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) -+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* last CID + 1 */ -+ -+/* -+ * T U N I N G -+ */ -+struct v4l2_tuner -+{ -+ __u32 index; -+ __u8 name[32]; -+ enum v4l2_tuner_type type; -+ __u32 capability; -+ __u32 rangelow; -+ __u32 rangehigh; -+ __u32 rxsubchans; -+ __u32 audmode; -+ __s32 signal; -+ __s32 afc; -+ __u32 reserved[4]; -+}; -+ -+struct v4l2_modulator -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 rangelow; -+ __u32 rangehigh; -+ __u32 txsubchans; -+ __u32 reserved[4]; -+}; -+ -+/* Flags for the 'capability' field */ -+#define V4L2_TUNER_CAP_LOW 0x0001 -+#define V4L2_TUNER_CAP_NORM 0x0002 -+#define V4L2_TUNER_CAP_STEREO 0x0010 -+#define V4L2_TUNER_CAP_LANG2 0x0020 -+#define V4L2_TUNER_CAP_SAP 0x0020 -+#define V4L2_TUNER_CAP_LANG1 0x0040 -+ -+/* Flags for the 'rxsubchans' field */ -+#define V4L2_TUNER_SUB_MONO 0x0001 -+#define V4L2_TUNER_SUB_STEREO 0x0002 -+#define V4L2_TUNER_SUB_LANG2 0x0004 -+#define V4L2_TUNER_SUB_SAP 0x0004 -+#define V4L2_TUNER_SUB_LANG1 0x0008 -+ -+/* Values for the 'audmode' field */ -+#define V4L2_TUNER_MODE_MONO 0x0000 -+#define V4L2_TUNER_MODE_STEREO 0x0001 -+#define V4L2_TUNER_MODE_LANG2 0x0002 -+#define V4L2_TUNER_MODE_SAP 0x0002 -+#define V4L2_TUNER_MODE_LANG1 0x0003 -+ -+struct v4l2_frequency -+{ -+ __u32 tuner; -+ enum v4l2_tuner_type type; -+ __u32 frequency; -+ __u32 reserved[8]; -+}; -+ -+/* -+ * A U D I O -+ */ -+struct v4l2_audio -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 mode; -+ __u32 reserved[2]; -+}; -+/* Flags for the 'capability' field */ -+#define V4L2_AUDCAP_STEREO 0x00001 -+#define V4L2_AUDCAP_AVL 0x00002 -+ -+/* Flags for the 'mode' field */ -+#define V4L2_AUDMODE_AVL 0x00001 -+ -+struct v4l2_audioout -+{ -+ __u32 index; -+ __u8 name[32]; -+ __u32 capability; -+ __u32 mode; -+ __u32 reserved[2]; -+}; -+ -+/* -+ * D A T A S E R V I C E S ( V B I ) -+ * -+ * Data services API by Michael Schimek -+ */ -+ -+struct v4l2_vbi_format -+{ -+ __u32 sampling_rate; /* in 1 Hz */ -+ __u32 offset; -+ __u32 samples_per_line; -+ __u32 sample_format; /* V4L2_PIX_FMT_* */ -+ __s32 start[2]; -+ __u32 count[2]; -+ __u32 flags; /* V4L2_VBI_* */ -+ __u32 reserved[2]; /* must be zero */ -+}; -+ -+/* VBI flags */ -+#define V4L2_VBI_UNSYNC (1<< 0) -+#define V4L2_VBI_INTERLACED (1<< 1) -+ -+ -+/* -+ * A G G R E G A T E S T R U C T U R E S -+ */ -+ -+/* Stream data format -+ */ -+struct v4l2_format -+{ -+ enum v4l2_buf_type type; -+ union -+ { -+ struct v4l2_pix_format pix; // V4L2_BUF_TYPE_VIDEO_CAPTURE -+ struct v4l2_window win; // V4L2_BUF_TYPE_VIDEO_OVERLAY -+ struct v4l2_vbi_format vbi; // V4L2_BUF_TYPE_VBI_CAPTURE -+ __u8 raw_data[200]; // user-defined -+ } fmt; -+}; -+ -+ -+/* Stream type-dependent parameters -+ */ -+struct v4l2_streamparm -+{ -+ enum v4l2_buf_type type; -+ union -+ { -+ struct v4l2_captureparm capture; -+ struct v4l2_outputparm output; -+ __u8 raw_data[200]; /* user-defined */ -+ } parm; -+}; -+ -+ -+ -+/* -+ * I O C T L C O D E S F O R V I D E O D E V I C E S -+ * -+ */ -+#define VIDIOC_QUERYCAP _IOR ('V', 0, struct v4l2_capability) -+#define VIDIOC_RESERVED _IO ('V', 1) -+#define VIDIOC_ENUM_FMT _IOWR ('V', 2, struct v4l2_fmtdesc) -+#define VIDIOC_G_FMT _IOWR ('V', 4, struct v4l2_format) -+#define VIDIOC_S_FMT _IOWR ('V', 5, struct v4l2_format) -+#if 0 -+#define VIDIOC_G_COMP _IOR ('V', 6, struct v4l2_compression) -+#define VIDIOC_S_COMP _IOW ('V', 7, struct v4l2_compression) -+#endif -+#define VIDIOC_REQBUFS _IOWR ('V', 8, struct v4l2_requestbuffers) -+#define VIDIOC_QUERYBUF _IOWR ('V', 9, struct v4l2_buffer) -+#define VIDIOC_G_FBUF _IOR ('V', 10, struct v4l2_framebuffer) -+#define VIDIOC_S_FBUF _IOW ('V', 11, struct v4l2_framebuffer) -+#define VIDIOC_OVERLAY _IOW ('V', 14, int) -+#define VIDIOC_QBUF _IOWR ('V', 15, struct v4l2_buffer) -+#define VIDIOC_DQBUF _IOWR ('V', 17, struct v4l2_buffer) -+#define VIDIOC_STREAMON _IOW ('V', 18, int) -+#define VIDIOC_STREAMOFF _IOW ('V', 19, int) -+#define VIDIOC_G_PARM _IOWR ('V', 21, struct v4l2_streamparm) -+#define VIDIOC_S_PARM _IOWR ('V', 22, struct v4l2_streamparm) -+#define VIDIOC_G_STD _IOR ('V', 23, v4l2_std_id) -+#define VIDIOC_S_STD _IOW ('V', 24, v4l2_std_id) -+#define VIDIOC_ENUMSTD _IOWR ('V', 25, struct v4l2_standard) -+#define VIDIOC_ENUMINPUT _IOWR ('V', 26, struct v4l2_input) -+#define VIDIOC_G_CTRL _IOWR ('V', 27, struct v4l2_control) -+#define VIDIOC_S_CTRL _IOWR ('V', 28, struct v4l2_control) -+#define VIDIOC_G_TUNER _IOWR ('V', 29, struct v4l2_tuner) -+#define VIDIOC_S_TUNER _IOW ('V', 30, struct v4l2_tuner) -+#define VIDIOC_G_AUDIO _IOR ('V', 33, struct v4l2_audio) -+#define VIDIOC_S_AUDIO _IOW ('V', 34, struct v4l2_audio) -+#define VIDIOC_QUERYCTRL _IOWR ('V', 36, struct v4l2_queryctrl) -+#define VIDIOC_QUERYMENU _IOWR ('V', 37, struct v4l2_querymenu) -+#define VIDIOC_G_INPUT _IOR ('V', 38, int) -+#define VIDIOC_S_INPUT _IOWR ('V', 39, int) -+#define VIDIOC_G_OUTPUT _IOR ('V', 46, int) -+#define VIDIOC_S_OUTPUT _IOWR ('V', 47, int) -+#define VIDIOC_ENUMOUTPUT _IOWR ('V', 48, struct v4l2_output) -+#define VIDIOC_G_AUDOUT _IOR ('V', 49, struct v4l2_audioout) -+#define VIDIOC_S_AUDOUT _IOW ('V', 50, struct v4l2_audioout) -+#define VIDIOC_G_MODULATOR _IOWR ('V', 54, struct v4l2_modulator) -+#define VIDIOC_S_MODULATOR _IOW ('V', 55, struct v4l2_modulator) -+#define VIDIOC_G_FREQUENCY _IOWR ('V', 56, struct v4l2_frequency) -+#define VIDIOC_S_FREQUENCY _IOW ('V', 57, struct v4l2_frequency) -+#define VIDIOC_CROPCAP _IOR ('V', 58, struct v4l2_cropcap) -+#define VIDIOC_G_CROP _IOWR ('V', 59, struct v4l2_crop) -+#define VIDIOC_S_CROP _IOW ('V', 60, struct v4l2_crop) -+#define VIDIOC_G_JPEGCOMP _IOR ('V', 61, struct v4l2_jpegcompression) -+#define VIDIOC_S_JPEGCOMP _IOW ('V', 62, struct v4l2_jpegcompression) -+#define VIDIOC_QUERYSTD _IOR ('V', 63, v4l2_std_id) -+#define VIDIOC_TRY_FMT _IOWR ('V', 64, struct v4l2_format) -+#define VIDIOC_ENUMAUDIO _IOWR ('V', 65, struct v4l2_audio) -+#define VIDIOC_ENUMAUDOUT _IOWR ('V', 66, struct v4l2_audioout) -+#define VIDIOC_G_PRIORITY _IOR ('V', 67, enum v4l2_priority) -+#define VIDIOC_S_PRIORITY _IOW ('V', 68, enum v4l2_priority) -+ -+/* for compatibility, will go away some day */ -+#define VIDIOC_OVERLAY_OLD _IOWR ('V', 14, int) -+#define VIDIOC_S_PARM_OLD _IOW ('V', 22, struct v4l2_streamparm) -+#define VIDIOC_S_CTRL_OLD _IOW ('V', 28, struct v4l2_control) -+#define VIDIOC_G_AUDIO_OLD _IOWR ('V', 33, struct v4l2_audio) -+#define VIDIOC_G_AUDOUT_OLD _IOWR ('V', 49, struct v4l2_audioout) -+ -+#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ -+ -+ -+#ifdef __KERNEL__ -+/* -+ * -+ * V 4 L 2 D R I V E R H E L P E R A P I -+ * -+ * Some commonly needed functions for drivers (v4l2-common.o module) -+ */ -+#include -+ -+/* Video standard functions */ -+extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); -+extern int v4l2_video_std_construct(struct v4l2_standard *vs, -+ int id, char *name); -+ -+/* prority handling */ -+struct v4l2_prio_state { -+ atomic_t prios[4]; -+}; -+int v4l2_prio_init(struct v4l2_prio_state *global); -+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, -+ enum v4l2_priority new); -+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local); -+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local); -+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global); -+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local); -+ -+/* names for fancy debug output */ -+extern char *v4l2_field_names[]; -+extern char *v4l2_type_names[]; -+extern char *v4l2_ioctl_names[]; -+ -+/* Compatibility layer interface -- v4l1-compat module */ -+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg); -+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file, -+ int cmd, void *arg, v4l2_kioctl driver_ioctl); -+ -+#endif /* __KERNEL__ */ -+#endif /* __LINUX_VIDEODEV2_H */ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,332 @@ -+/* -+ * Video capture interface for Linux Character Device Driver. -+ * based on -+ * Alan Cox, video4linux -+ * -+ * Author: SW.LEE -+ * 2004 (C) Samsung Electronics -+ * Modified for S3C2440/S3C24A0 Interface -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+/* #include */ -+#include -+#include -+#include -+#include -+ -+ -+ -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+ -+ -+static DECLARE_MUTEX(videodev_lock); -+ -+const char *fimc_version = "$Id: videodev.c,v 1.1.1.1 2004/04/27 03:52:50 swlee Exp $"; -+ -+#define VIDEO_NAME "video4linux" -+ -+ -+#define VIDEO_NUM_DEVICES 2 -+static struct video_device *video_device[VIDEO_NUM_DEVICES]; -+ -+static inline struct video_device * get_vd(int nr) -+{ -+ if ( nr == CODEC_MINOR) -+ return video_device[0]; -+ else { -+ assert ( nr & PREVIEW_MINOR); -+ return video_device[1]; -+ } -+} -+ -+static inline void set_vd ( struct video_device * vd, int nr) -+{ -+ if ( nr == CODEC_MINOR) -+ video_device[0] = vd; -+ else { -+ assert ( nr & PREVIEW_MINOR); -+ video_device[1] = vd; -+ } -+} -+ -+static inline int video_release(struct inode *inode, struct file *f) -+{ -+ int minor = MINOR(inode->i_rdev); -+ struct video_device *vfd; -+ -+ vfd = get_vd(minor); -+#if 1 /* needed until all drivers are fixed */ -+ if (!vfd->release) -+ return 0; -+#endif -+ vfd->release(vfd); -+ return 0; -+} -+ -+struct video_device* video_devdata(struct file *file) -+{ -+ return video_device[iminor(file->f_dentry->d_inode)]; -+} -+ -+ -+/* -+ * Open a video device. -+ */ -+static int video_open(struct inode *inode, struct file *file) -+{ -+ int minor = MINOR(inode->i_rdev); -+ int err = 0; -+ struct video_device *vfl; -+ struct file_operations const *old_fops; -+ -+ down(&videodev_lock); -+ -+ vfl = get_vd(minor); -+ -+ old_fops = file->f_op; -+ file->f_op = fops_get(vfl->fops); -+ if(file->f_op->open) -+ err = file->f_op->open(inode,file); -+ if (err) { -+ fops_put(file->f_op); -+ file->f_op = fops_get(old_fops); -+ } -+ fops_put(old_fops); -+ up(&videodev_lock); -+ return err; -+} -+ -+/* -+ * open/release helper functions -- handle exclusive opens -+ */ -+extern int video_exclusive_open(struct inode *inode, struct file *file) -+{ -+ struct video_device *vfl = get_vd(MINOR(inode->i_rdev)); -+ int retval = 0; -+ -+ mutex_lock(&vfl->lock); -+ if (vfl->users) { -+ retval = -EBUSY; -+ } else { -+ vfl->users++; -+ } -+ mutex_unlock(&vfl->lock); -+ return retval; -+} -+ -+extern int video_exclusive_release(struct inode *inode, struct file *file) -+{ -+ struct video_device *vfl = get_vd(MINOR(inode->i_rdev)); -+ vfl->users--; -+ return 0; -+} -+ -+int -+video_usercopy(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg, -+ int (*func)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg)) -+{ -+ char sbuf[128]; -+ void *mbuf = NULL; -+ void *parg = NULL; -+ int err = -EINVAL; -+ -+ // cmd = video_fix_command(cmd); -+ -+ /* Copy arguments into temp kernel buffer */ -+ switch (_IOC_DIR(cmd)) { -+ case _IOC_NONE: -+ parg = (void *)arg; -+ break; -+ case _IOC_READ: -+ case _IOC_WRITE: -+ case (_IOC_WRITE | _IOC_READ): -+ if (_IOC_SIZE(cmd) <= sizeof(sbuf)) { -+ parg = sbuf; -+ } else { -+ /* too big to allocate from stack */ -+ mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL); -+ if (NULL == mbuf) -+ return -ENOMEM; -+ parg = mbuf; -+ } -+ -+ err = -EFAULT; -+ if (_IOC_DIR(cmd) & _IOC_WRITE) -+ if (copy_from_user(parg, (void *)arg, _IOC_SIZE(cmd))) -+ goto out; -+ break; -+ } -+ -+ /* call driver */ -+ err = func(inode, file, cmd, parg); -+ if (err == -ENOIOCTLCMD) -+ err = -EINVAL; -+ if (err < 0) -+ goto out; -+ -+ /* Copy results into user buffer */ -+ switch (_IOC_DIR(cmd)) -+ { -+ case _IOC_READ: -+ case (_IOC_WRITE | _IOC_READ): -+ if (copy_to_user((void *)arg, parg, _IOC_SIZE(cmd))) -+ err = -EFAULT; -+ break; -+ } -+ -+out: -+ if (mbuf) -+ kfree(mbuf); -+ return err; -+} -+ -+ -+static struct file_operations video_fops= -+{ -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .open = video_open, -+ .release = video_release, -+}; -+ -+static struct miscdevice codec_dev = { -+ minor: CODEC_MINOR, -+ name : "codec", -+ fops : &video_fops -+}; -+ -+static struct miscdevice preview_dev = { -+ minor: PREVIEW_MINOR, -+ name : "preview", -+ fops : &video_fops -+}; -+ -+ -+/** -+ * video_register_device - register video4linux devices -+ * @vfd: video device structure we want to register -+ * @type: type of device to register -+ * @nr: minor number -+ * -+ * Zero is returned on success. -+ * type : ignored. -+ * nr : -+ * 0 Codec index -+ * 1 Preview index -+ */ -+int video_register_device(struct video_device *vfd, int type, int nr) -+{ -+ int ret=0; -+ -+ /* pick a minor number */ -+ down(&videodev_lock); -+ set_vd (vfd, nr); -+ vfd->minor=nr; -+ up(&videodev_lock); -+ -+ switch (vfd->minor) { -+ case CODEC_MINOR: -+ ret = misc_register(&codec_dev); -+ if (ret) { -+ printk(KERN_ERR -+ "can't misc_register : codec on minor=%d\n", CODEC_MINOR); -+ panic(" Give me misc codec \n"); -+ } -+ break; -+ case PREVIEW_MINOR: -+ ret = misc_register(&preview_dev); -+ if (ret) { -+ printk(KERN_ERR -+ "can't misc_register (preview) on minor=%d\n", PREVIEW_MINOR); -+ panic(" Give me misc codec \n"); -+ } -+ break; -+ } -+ -+#if 0 /* needed until all drivers are fixed */ -+ if (!vfd->release) -+ printk(KERN_WARNING "videodev: \"%s\" has no release callback. " -+ "Please fix your driver for proper sysfs support, see " -+ "http://lwn.net/Articles/36850/\n", vfd->name); -+#endif -+ return 0; -+} -+ -+/** -+ * video_unregister_device - unregister a video4linux device -+ * @vfd: the device to unregister -+ * -+ * This unregisters the passed device and deassigns the minor -+ * number. Future open calls will be met with errors. -+ */ -+ -+void video_unregister_device(struct video_device *vfd) -+{ -+ down(&videodev_lock); -+ -+ if(get_vd(vfd->minor)!=vfd) -+ panic("videodev: bad unregister"); -+ -+ if (vfd->minor== CODEC_MINOR) -+ misc_deregister(&codec_dev); -+ else -+ misc_deregister(&preview_dev); -+ set_vd (NULL, vfd->minor); -+ up(&videodev_lock); -+} -+ -+ -+/* -+ * Initialise video for linux -+ */ -+ -+static int __init videodev_init(void) -+{ -+// printk(KERN_INFO "FIMC2.0 Built:"__DATE__" "__TIME__"\n%s\n",fimc_version); -+ return 0; -+} -+ -+static void __exit videodev_exit(void) -+{ -+} -+ -+module_init(videodev_init) -+module_exit(videodev_exit) -+ -+EXPORT_SYMBOL(video_register_device); -+EXPORT_SYMBOL(fimc_version); -+EXPORT_SYMBOL(video_unregister_device); -+EXPORT_SYMBOL(video_usercopy); -+EXPORT_SYMBOL(video_exclusive_open); -+EXPORT_SYMBOL(video_exclusive_release); -+ -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("VideoDev For FIMC2.0 MISC Drivers"); -+MODULE_LICENSE("GPL"); -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/videodev.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,108 @@ -+//#ifndef __LINUX_S3C_VIDEODEV_H -+//#define __LINUX_S3C_VIDEODEV_H -+ -+#include -+#include -+#include -+ -+#if 0 -+struct video_device -+{ -+ /* device info */ -+ // struct device *dev; -+ char name[32]; -+ int type; /* v4l1 */ -+ int type2; /* v4l2 */ -+ int hardware; -+ int minor; -+ -+ /* device ops + callbacks */ -+ struct file_operations *fops; -+ void (*release)(struct video_device *vfd); -+ -+ -+#if 1 /* to be removed in 2.7.x */ -+ /* obsolete -- fops->owner is used instead */ -+ struct module *owner; -+ /* dev->driver_data will be used instead some day. -+ * Use the video_{get|set}_drvdata() helper functions, -+ * so the switch over will be transparent for you. -+ * Or use {pci|usb}_{get|set}_drvdata() directly. */ -+ void *priv; -+#endif -+ -+ /* for videodev.c intenal usage -- please don't touch */ -+ int users; /* video_exclusive_{open|close} ... */ -+ struct semaphore lock; /* ... helper function uses these */ -+ char devfs_name[64]; /* devfs */ -+ // struct class_device class_dev; /* sysfs */ -+}; -+ -+#define VIDEO_MAJOR 81 -+ -+#define VFL_TYPE_GRABBER 0 -+ -+ -+extern int video_register_device(struct video_device *, int type, int nr); -+extern void video_unregister_device(struct video_device *); -+extern struct video_device* video_devdata(struct file*); -+ -+ -+ -+struct video_picture -+{ -+ __u16 brightness; -+ __u16 hue; -+ __u16 colour; -+ __u16 contrast; -+ __u16 whiteness; /* Black and white only */ -+ __u16 depth; /* Capture depth */ -+ __u16 palette; /* Palette in use */ -+#define VIDEO_PALETTE_GREY 1 /* Linear greyscale */ -+#define VIDEO_PALETTE_HI240 2 /* High 240 cube (BT848) */ -+#define VIDEO_PALETTE_RGB565 3 /* 565 16 bit RGB */ -+#define VIDEO_PALETTE_RGB24 4 /* 24bit RGB */ -+#define VIDEO_PALETTE_RGB32 5 /* 32bit RGB */ -+#define VIDEO_PALETTE_RGB555 6 /* 555 15bit RGB */ -+#define VIDEO_PALETTE_YUV422 7 /* YUV422 capture */ -+#define VIDEO_PALETTE_YUYV 8 -+#define VIDEO_PALETTE_UYVY 9 /* The great thing about standards is ... */ -+#define VIDEO_PALETTE_YUV420 10 -+#define VIDEO_PALETTE_YUV411 11 /* YUV411 capture */ -+#define VIDEO_PALETTE_RAW 12 /* RAW capture (BT848) */ -+#define VIDEO_PALETTE_YUV422P 13 /* YUV 4:2:2 Planar */ -+#define VIDEO_PALETTE_YUV411P 14 /* YUV 4:1:1 Planar */ -+#define VIDEO_PALETTE_YUV420P 15 /* YUV 4:2:0 Planar */ -+#define VIDEO_PALETTE_YUV410P 16 /* YUV 4:1:0 Planar */ -+#define VIDEO_PALETTE_PLANAR 13 /* start of planar entries */ -+#define VIDEO_PALETTE_COMPONENT 7 /* start of component entries */ -+}; -+ -+extern int video_exclusive_open(struct inode *inode, struct file *file); -+extern int video_exclusive_release(struct inode *inode, struct file *file); -+extern int video_usercopy(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg, -+ int (*func)(struct inode *inode, struct file *file, -+ unsigned int cmd, void *arg)); -+ -+ -+ -+ -+#define VID_TYPE_CAPTURE 1 /* Can capture */ -+#define VID_TYPE_CLIPPING 32 /* Can clip */ -+#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -+#define VID_TYPE_SCALES 128 /* Scalable */ -+#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -+ -+ -+ -+#endif -+//#endif -+ -+#define VID_HARDWARE_SAMSUNG_FIMC 255 -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/camera/video-driver.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/camera/video-driver.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,624 @@ -+/* -+ Copyright (C) 2004 Samsung Electronics -+ SW.LEE -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+//#define SW_DEBUG -+#define CONFIG_VIDEO_V4L1_COMPAT -+#include -+#include "camif.h" -+#include "miscdevice.h" -+#include "cam_reg.h" -+#include "sensor.h" -+#include "userapp.h" -+ -+#ifdef Z_API -+#include "qt.h" -+#endif -+ -+/* Codec and Preview */ -+#define CAMIF_NUM 2 -+static camif_cfg_t fimc[CAMIF_NUM]; -+u32 *camregs; -+ -+static const char *driver_version = -+ "$Id: video-driver.c,v 1.9 2004/06/02 03:10:36 swlee Exp $"; -+extern const char *fimc_version; -+extern const char *fsm_version; -+ -+extern void camif_start_c_with_p (camif_cfg_t *cfg, camif_cfg_t *other); -+ -+camif_cfg_t * get_camif(int nr) -+{ -+ camif_cfg_t *ret = NULL; -+ switch(nr) { -+ case CODEC_MINOR: -+ ret = &fimc[0]; -+ break; -+ case PREVIEW_MINOR: -+ ret = &fimc[1]; -+ break; -+ default: -+ panic("Unknow Minor Number \n"); -+ } -+ return ret; -+} -+ -+ -+static int camif_codec_start(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ ret =camif_check_preview(cfg); -+ switch(ret) { -+ case 0: /* Play alone */ -+ DPRINTK("Start Alone \n"); -+ camif_4fsm_start(cfg); -+ cfg->gc->status |= C_WORKING; -+ break; -+ case -ERESTARTSYS: /* Busy , retry */ -+ //DPRINTK("Error \n"); -+ printk("Error \n"); -+ break; -+ case 1: -+ DPRINTK("need callback \n"); -+ ret = camif_callback_start(cfg); -+ if(ret < 0 ) { -+ printk(KERN_INFO "Busy RESTART \n"); -+ return ret; /* Busy, retry */ -+ } -+ break; -+ } -+ return ret; -+} -+ -+ -+ssize_t camif_write (struct file *f, const char *b, size_t c,loff_t *offset) -+{ -+ camif_cfg_t *cfg; -+ -+ c = 0; /* return value */ -+ DPRINTK("\n"); -+ cfg = get_camif(MINOR(f->f_dentry->d_inode->i_rdev)); -+ switch (*b) { -+ case 'O': -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if (cfg->gc->status & C_WORKING) { -+ camif_start_c_with_p(cfg,get_camif(CODEC_MINOR)); -+ } -+ else { -+ camif_4fsm_start(cfg); -+ } -+ } -+ else{ -+ c = camif_codec_start(cfg); -+ if(c < 0) c = 1; /* Error and neet to retry */ -+ } -+ -+ break; -+ case 'X': -+ camif_p_stop(cfg); -+ break; -+ default: -+ panic("CAMERA:camif_write: Unexpected Param\n"); -+ } -+ DPRINTK("end\n"); -+ -+ return c; -+} -+ -+ -+ssize_t camif_p_read(struct file *file, char *buf, size_t count, loff_t *pos) -+{ -+ camif_cfg_t *cfg = NULL; -+ size_t end; -+ -+ cfg = get_camif(MINOR(file->f_dentry->d_inode->i_rdev)); -+ cfg->status = CAMIF_STARTED; -+ -+ if (wait_event_interruptible(cfg->waitq,cfg->status == CAMIF_INT_HAPPEN)) -+ return -ERESTARTSYS; -+ -+ cfg->status = CAMIF_STOPPED; -+ end = min_t(size_t, cfg->pp_totalsize /cfg->pp_num, count); -+ if (copy_to_user(buf, camif_g_frame(cfg), end)) -+ return -EFAULT; -+ -+ return end; -+} -+ -+ -+static ssize_t -+camif_c_read(struct file *file, char *buf, size_t count, loff_t *pos) -+{ -+ camif_cfg_t *cfg = NULL; -+ size_t end; -+ -+ /* cfg = file->private_data; */ -+ cfg = get_camif(MINOR(file->f_dentry->d_inode->i_rdev)); -+#if 0 -+ if(file->f_flags & O_NONBLOCK) { -+ printk(KERN_ERR"Don't Support NON_BLOCK \n"); -+ } -+#endif -+ -+ /* Change the below wait_event_interruptible func */ -+ if (wait_event_interruptible(cfg->waitq,cfg->status == CAMIF_INT_HAPPEN)) -+ return -ERESTARTSYS; -+ cfg->status = CAMIF_STOPPED; -+ end = min_t(size_t, cfg->pp_totalsize /cfg->pp_num, count); -+ if (copy_to_user(buf, camif_g_frame(cfg), end)) -+ return -EFAULT; -+ return end; -+} -+ -+ -+static irqreturn_t camif_c_irq(int irq, void *dev_id) -+{ -+ camif_cfg_t *cfg = (camif_cfg_t *)dev_id; -+ -+ DPRINTK("\n"); -+ camif_g_fifo_status(cfg); -+ camif_g_frame_num(cfg); -+ if(camif_enter_c_4fsm(cfg) != INSTANT_SKIP) -+ wake_up_interruptible(&cfg->waitq); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t camif_p_irq(int irq, void *dev_id) -+{ -+ camif_cfg_t *cfg = (camif_cfg_t *)dev_id; -+ -+ DPRINTK("\n"); -+ camif_g_fifo_status(cfg); -+ camif_g_frame_num(cfg); -+ if(camif_enter_p_4fsm(cfg) != INSTANT_SKIP) -+ wake_up_interruptible(&cfg->waitq); -+#if 0 -+ if( (cfg->perf.frames % 5) == 0) -+ DPRINTK("5\n"); -+#endif -+ -+ return IRQ_HANDLED; -+} -+ -+static void camif_release_irq(camif_cfg_t *cfg) -+{ -+ disable_irq(cfg->irq); -+ free_irq(cfg->irq, cfg); -+} -+ -+static int camif_irq_request(camif_cfg_t *cfg) -+{ -+ int ret = 0; -+ -+ if (cfg->dma_type & CAMIF_CODEC) { -+ if ((ret = request_irq(cfg->irq, camif_c_irq, -+ 0, cfg->shortname, cfg))) { -+ printk("request_irq(CAM_C) failed.\n"); -+ } -+ } -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if ((ret = request_irq(cfg->irq, camif_p_irq, -+ 0, cfg->shortname, cfg))) { -+ printk("request_irq(CAM_P) failed.\n"); -+ } -+ } -+ return 0; -+} -+ -+static void camif_init_sensor(camif_cfg_t *cfg) -+{ -+ camif_gc_t *gc = cfg->gc; -+ if (!gc->sensor) -+ panic("CAMERA:I2C Client(Img Sensor)Not registered\n"); -+ if(!gc->init_sensor) { -+ camif_reset(gc->reset_type, gc->reset_udelay); -+ gc->sensor->driver->command(gc->sensor,SENSOR_INIT,NULL); -+ gc->init_sensor = 1; /*sensor init done */ -+ } -+ gc->sensor->driver->command(gc->sensor, USER_ADD, NULL); -+} -+ -+static int camif_open(struct inode *inode, struct file *file) -+{ -+ int err; -+ camif_cfg_t * cfg = get_camif(MINOR(inode->i_rdev)); -+ -+ if(cfg->dma_type & CAMIF_PREVIEW) { -+ if(down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ cfg->gc->status &= ~PNOTWORKING; -+ } -+ up(&cfg->gc->lock); -+ } -+ err = video_exclusive_open(inode,file); -+ cfg->gc->user++; -+ cfg->status = CAMIF_STOPPED; -+ if (err < 0) return err; -+ if (file->f_flags & O_NONCAP ) { -+ printk("Don't Support Non-capturing open \n"); -+ return 0; -+ } -+ file->private_data = cfg; -+ camif_irq_request(cfg); -+ camif_init_sensor(cfg); -+ return 0; -+} -+ -+#if 0 -+static void print_pregs(void) -+{ -+ printk(" CISRCFMT 0x%08X \n", CISRCFMT); -+ printk(" CIWDOFST 0x%08X \n", CIWDOFST); -+ printk(" CIGCTRL 0x%08X \n", CIGCTRL); -+ printk(" CIPRTRGFMT 0x%08X \n", CIPRTRGFMT); -+ printk(" CIPRCTRL 0x%08X \n", CIPRCTRL); -+ printk(" CIPRSCPRERATIO 0x%08X \n", CIPRSCPRERATIO); -+ printk(" CIPRSCPREDST 0x%08X \n", CIPRSCPREDST); -+ printk(" CIPRSCCTRL 0x%08X \n", CIPRSCCTRL); -+ printk(" CIPRTAREA 0x%08X \n", CIPRTAREA); -+ printk(" CIPRSTATUS 0x%08X \n", CIPRSTATUS); -+ printk(" CIIMGCPT 0x%08X \n", CIIMGCPT); -+} -+ -+static void print_cregs(void) -+{ -+ printk(" CISRCFMT 0x%08X \n", CISRCFMT); -+ printk(" CIWDOFST 0x%08X \n", CIWDOFST); -+ printk(" CIGCTRL 0x%08X \n", CIGCTRL); -+ printk(" CICOCTRL 0x%8X \n", CICOCTRL); -+ printk(" CICOSCPRERATIO 0x%08X \n", CICOSCPRERATIO); -+ printk(" CICOSCPREDST 0x%08X \n", CICOSCPREDST); -+ printk(" CICOSCCTRL 0x%08X \n", CICOSCCTRL); -+ printk(" CICOTAREA 0x%08X \n", CICOTAREA); -+ printk(" CICOSTATUS 0x%8X \n", CICOSTATUS); -+ printk(" CIIMGCPT 0x%08X \n", CIIMGCPT); -+} -+#endif -+ -+ -+static int camif_release(struct inode *inode, struct file *file) -+{ -+ camif_cfg_t * cfg = get_camif(MINOR(inode->i_rdev)); -+ -+ //DPRINTK(" cfg->status 0x%0X cfg->gc->status 0x%0X \n", cfg->status,cfg->gc->status ); -+ if (cfg->dma_type & CAMIF_PREVIEW) { -+ if(down_interruptible(&cfg->gc->lock)) -+ return -ERESTARTSYS; -+ cfg->gc->status &= ~PWANT2START; -+ cfg->gc->status |= PNOTWORKING; -+ up(&cfg->gc->lock); -+ } -+ else { -+ cfg->gc->status &= ~CWANT2START; /* No need semaphore */ -+ } -+ camif_dynamic_close(cfg); -+ camif_release_irq(cfg); -+ video_exclusive_release(inode,file); -+ camif_p_stop(cfg); -+ cfg->gc->sensor->driver->command(cfg->gc->sensor, USER_EXIT, NULL); -+ cfg->gc->user--; -+ cfg->status = CAMIF_STOPPED; -+ return 0; -+} -+ -+static void fimc_config(camif_cfg_t *cfg,u32 x, u32 y, int bpp) -+{ -+ cfg->target_x = x; -+ cfg->target_y = y; -+ -+ switch (bpp) { -+ case 16: -+ cfg->fmt = CAMIF_RGB16; -+ break; -+ case 24: -+ cfg->fmt = CAMIF_RGB24; -+ break; -+ case 420: -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR420; -+ break; -+ case 422: -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR422; -+ break; -+ default: -+ panic("Wrong BPP \n"); -+ } -+} -+ -+ -+static int -+camif_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int ret = 0; -+ camif_cfg_t *cfg = file->private_data; -+ camif_param_t par; -+ -+ switch (cmd) { -+ case CMD_CAMERA_INIT: -+ if (copy_from_user(&par,(camif_param_t *)arg, -+ sizeof(camif_param_t))) -+ return -EFAULT; -+ fimc_config(cfg,par.dst_x, par.dst_y, par.bpp); -+ if (camif_dynamic_open(cfg)) { -+ printk(" Eror Happens \n"); -+ ret = -1; -+ } -+ -+ switch (par.flip) { -+ case 3 : -+ cfg->flip = CAMIF_FLIP_MIRROR; -+ break; -+ case 1 : -+ cfg->flip = CAMIF_FLIP_X; -+ break; -+ case 2 : -+ cfg->flip = CAMIF_FLIP_Y; -+ break; -+ case 0 : -+ default: -+ cfg->flip = CAMIF_FLIP; -+ } -+ break; -+ /* Todo -+ case CMD_SENSOR_BRIGHTNESS: -+ cfg->gc->sensor->driver->command(cfg->gc->sensor, SENSOR_BRIGHTNESS, NULL); -+ break; -+ */ -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ return ret; -+} -+ -+ -+#if 0 -+static int camif_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+// camif_cfg_t *cfg = file->private_data; -+ -+ -+ switch (cmd) { -+/* case Some_other_action */ -+ default: -+ return video_usercopy(inode, file, cmd, arg, camif_do_ioctl); -+ } -+} -+#endif -+ -+static struct file_operations camif_c_fops = -+{ -+ .owner = THIS_MODULE, -+ .open = camif_open, -+ .release = camif_release, -+ .ioctl = camif_ioctl, -+ .read = camif_c_read, -+ .write = camif_write, -+}; -+ -+static struct file_operations camif_p_fops = -+{ -+ .owner = THIS_MODULE, -+ .open = camif_open, -+ .release = camif_release, -+ .ioctl = camif_ioctl, -+#ifdef Z_API -+ .read = z_read, -+ .write = z_write, -+#else -+ .read = camif_p_read, -+ .write = camif_write, -+#endif -+}; -+ -+static struct video_device codec_template = -+{ -+ .name = "CODEC_IF", -+ .type = VID_TYPE_CAPTURE|VID_TYPE_CLIPPING|VID_TYPE_SCALES, -+/* .hardware = VID_HARDWARE_SAMSUNG_FIMC20, */ -+ .fops = &camif_c_fops, -+// .release = camif_release -+ .minor = -1, -+}; -+ -+static struct video_device preview_template = -+{ -+ .name = "PREVIEW_IF", -+ .type = VID_TYPE_CAPTURE|VID_TYPE_CLIPPING|VID_TYPE_SCALES, -+/* .hardware = VID_HARDWARE_SAMSUNG_FIMC20, */ -+ .fops = &camif_p_fops, -+ .minor = -1, -+}; -+ -+static int preview_init(camif_cfg_t *cfg) -+{ -+ char name[16]="CAM_PREVIEW"; -+ -+ memset(cfg, 0, sizeof(camif_cfg_t)); -+ cfg->target_x = 640; -+ cfg->target_y = 480; -+ cfg->pp_num = 4; -+ cfg->dma_type = CAMIF_PREVIEW; -+ cfg->fmt = CAMIF_RGB16; -+ cfg->flip = CAMIF_FLIP_Y; -+ cfg->v = &preview_template; -+ mutex_init(&cfg->v->lock); -+ cfg->irq = IRQ_S3C2440_CAM_P; -+ -+ strcpy(cfg->shortname,name); -+ init_waitqueue_head(&cfg->waitq); -+ cfg->status = CAMIF_STOPPED; -+ return cfg->status; -+} -+ -+static int codec_init(camif_cfg_t *cfg) -+{ -+ char name[16]="CAM_CODEC"; -+ -+ memset(cfg, 0, sizeof(camif_cfg_t)); -+ cfg->target_x = 176; -+ cfg->target_y = 144; -+ cfg->pp_num = 4; -+ cfg->dma_type = CAMIF_CODEC; -+ cfg->fmt = CAMIF_IN_YCBCR422|CAMIF_OUT_YCBCR420; -+ cfg->flip = CAMIF_FLIP_X; -+ cfg->v = &codec_template; -+ mutex_init(&cfg->v->lock); -+ cfg->irq = IRQ_S3C2440_CAM_C; -+ strcpy(cfg->shortname,name); -+ init_waitqueue_head(&cfg->waitq); -+ cfg->status = CAMIF_STOPPED; -+ return cfg->status; -+} -+ -+static void camif_init(void) -+{ -+ camif_setup_sensor(); -+} -+ -+ -+ -+static void print_version(void) -+{ -+ printk(KERN_INFO"FIMC built:"__DATE__ " "__TIME__"\n%s\n%s\n%s\n", -+ fimc_version, driver_version,fsm_version); -+} -+ -+ -+static int camif_m_in(void) -+{ -+ int ret = -EINVAL; -+ camif_cfg_t * cfg; -+ -+ printk(KERN_INFO"Starting S3C2440 Camera Driver\n"); -+ -+ camregs = ioremap(CAM_BASE_ADD, 0x100); -+ if (!camregs) { -+ printk(KERN_ERR"Unable to map camera regs\n"); -+ ret = -ENOMEM; -+ goto bail1; -+ } -+ -+ camif_init(); -+ cfg = get_camif(CODEC_MINOR); -+ codec_init(cfg); -+ -+ ret = video_register_device(cfg->v,0,CODEC_MINOR); -+ if (ret) { -+ printk(KERN_ERR"Couldn't register codec driver.\n"); -+ goto bail2; -+ } -+ cfg = get_camif(PREVIEW_MINOR); -+ preview_init(cfg); -+ ret = video_register_device(cfg->v,0,PREVIEW_MINOR); -+ if (ret) { -+ printk(KERN_ERR"Couldn't register preview driver.\n"); -+ goto bail3; /* hm seems it us unregistered the once */ -+ } -+ -+ print_version(); -+ return 0; -+ -+bail3: -+ video_unregister_device(cfg->v); -+bail2: -+ iounmap(camregs); -+ camregs = NULL; -+bail1: -+ return ret; -+} -+ -+static void unconfig_device(camif_cfg_t *cfg) -+{ -+ video_unregister_device(cfg->v); -+ camif_hw_close(cfg); -+ iounmap(camregs); -+ //memset(cfg, 0, sizeof(camif_cfg_t)); -+ camregs = NULL; -+} -+ -+static void camif_m_out(void) /* module out */ -+{ -+ camif_cfg_t *cfg; -+ -+ cfg = get_camif(CODEC_MINOR); -+ unconfig_device(cfg); -+ cfg = get_camif(PREVIEW_MINOR); -+ unconfig_device(cfg); -+ -+ return; -+} -+ -+void camif_register_decoder(struct i2c_client *ptr) -+{ -+ camif_cfg_t *cfg; -+ void * data = i2c_get_clientdata(ptr); -+ -+ cfg =get_camif(CODEC_MINOR); -+ cfg->gc = (camif_gc_t *)(data); -+ -+ cfg =get_camif(PREVIEW_MINOR); -+ cfg->gc = (camif_gc_t *)(data); -+ -+ sema_init(&cfg->gc->lock, 1); /* global lock for both Codec and Preview */ -+ cfg->gc->status |= PNOTWORKING; /* Default Value */ -+ camif_hw_open(cfg->gc); -+} -+ -+void camif_unregister_decoder(struct i2c_client *ptr) -+{ -+ camif_gc_t *gc; -+ void * data = i2c_get_clientdata(ptr); -+ -+ gc = (camif_gc_t *)(data); -+ gc->init_sensor = 0; /* need to modify */ -+} -+ -+module_init(camif_m_in); -+module_exit(camif_m_out); -+ -+EXPORT_SYMBOL(camif_register_decoder); -+EXPORT_SYMBOL(camif_unregister_decoder); -+ -+MODULE_AUTHOR("SW.LEE "); -+MODULE_DESCRIPTION("Video-Driver For Fimc2.0 MISC Drivers"); -+MODULE_LICENSE("GPL"); -+ -+ -+/* -+ * Local variables: -+ * c-basic-offset: 8 -+ * End: -+ */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/dma.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/dma.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/dma.c 2009-01-02 00:01:56.000000000 +0100 -@@ -25,12 +25,12 @@ - - #include - #include --#include -+#include - #include - #include - #include - #include --#include -+#include - - static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { - [DMACH_XD0] = { -Index: linux-2.6.28/arch/arm/mach-s3c2440/fiq_c_isr.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/fiq_c_isr.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,321 @@ -+/* -+ * Copyright 2007 Andy Green -+ * S3C modfifications -+ * Copyright 2008 Andy Green -+ */ -+ -+#include -+#include -+#include -+#include -+#include "fiq_c_isr.h" -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+/* -+ * Major Caveats for using FIQ -+ * --------------------------- -+ * -+ * 1) it CANNOT touch any vmalloc()'d memory, only memory -+ * that was kmalloc()'d. Static allocations in the monolithic kernel -+ * are kmalloc()'d so they are okay. You can touch memory-mapped IO, but -+ * the pointer for it has to have been stored in kmalloc'd memory. The -+ * reason for this is simple: every now and then Linux turns off interrupts -+ * and reorders the paging tables. If a FIQ happens during this time, the -+ * virtual memory space can be partly or entirely disordered or missing. -+ * -+ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ -+ * ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module. But the way -+ * it is set up, you can all to enable and disable it from your module -+ * and intercommunicate with it through struct fiq_ipc -+ * fiq_ipc which you can define in -+ * asm/archfiq_ipc_type.h. The reason is the same as above, a -+ * FIQ could happen while even the ISR is not present in virtual memory -+ * space due to pagetables being changed at the time. -+ * -+ * 3) You can't call any Linux API code except simple macros -+ * - understand that FIQ can come in at any time, no matter what -+ * state of undress the kernel may privately be in, thinking it -+ * locked the door by turning off interrupts... FIQ is an -+ * unstoppable monster force (which is its value) -+ * - they are not vmalloc()'d memory safe -+ * - they might do crazy stuff like sleep: FIQ pisses fire and -+ * is not interested in 'sleep' that the weak seem to need -+ * - calling APIs from FIQ can re-enter un-renterable things -+ * - summary: you cannot interoperate with linux APIs directly in the FIQ ISR -+ * -+ * If you follow these rules, it is fantastic, an extremely powerful, solid, -+ * genuine hard realtime feature. -+ * -+ */ -+ -+/* more than enough to cover our jump instruction to the isr */ -+#define SIZEOF_FIQ_JUMP 4 -+ -+#define FIQ_VECTOR 0xffff001c -+ -+/* we put the stack at the area after the FIQ vector */ -+#define FIQ_STACK_SIZE 256 -+ -+/* only one FIQ ISR possible, okay to do these here */ -+u32 _fiq_ack_mask; /* used by isr exit define */ -+unsigned long _fiq_count_fiqs; /* used by isr exit define */ -+static int _fiq_irq; /* private ; irq index we were started with, or 0 */ -+struct s3c2410_pwm pwm_timer_fiq; -+int _fiq_timer_index; -+u16 _fiq_timer_divisor; -+u8 fiq_ready; -+ -+/* this function must live in the monolithic kernel somewhere! A module is -+ * NOT good enough! -+ */ -+extern void __attribute__ ((naked)) s3c2440_fiq_isr(void); -+ -+static void fiq_set_vector_and_regs(void); -+ -+ -+/* this is copied into the hard FIQ vector during init */ -+ -+static void __attribute__ ((naked)) s3c2440_FIQ_Branch(void) -+{ -+ asm __volatile__ ( -+ "mov pc, r8 ; " -+ ); -+} -+ -+/* sysfs */ -+ -+static ssize_t show_count(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ return sprintf(buf, "%ld\n", _fiq_count_fiqs); -+} -+ -+static DEVICE_ATTR(count, 0444, show_count, NULL); -+ -+static struct attribute *s3c2440_fiq_sysfs_entries[] = { -+ &dev_attr_count.attr, -+ NULL -+}; -+ -+static struct attribute_group s3c2440_fiq_attr_group = { -+ .name = "fiq", -+ .attrs = s3c2440_fiq_sysfs_entries, -+}; -+ -+/* -+ * call this from your kernel module to set up the FIQ ISR to service FIQs, -+ * You need to have configured your FIQ input pin before anything will happen -+ * -+ * call it with, eg, IRQ_TIMER3 from asm-arm/arch-s3c2410/irqs.h -+ * -+ * you still need to clear the source interrupt in S3C2410_INTMSK to get -+ * anything good happening -+ */ -+static int fiq_init_irq_source(int irq_index_fiq) -+{ -+ int rc = 0; -+ -+ if (!irq_index_fiq) /* no interrupt */ -+ goto bail; -+ -+ local_fiq_disable(); -+ -+ _fiq_irq = irq_index_fiq; -+ _fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET); -+ _fiq_timer_index = (irq_index_fiq - IRQ_TIMER0); -+ -+ /* set up the timer to operate as a pwm device */ -+ -+ rc = s3c2410_pwm_init(&pwm_timer_fiq); -+ if (rc) -+ goto bail; -+ -+ pwm_timer_fiq.timerid = PWM0 + _fiq_timer_index; -+ pwm_timer_fiq.prescaler = (6 - 1) / 2; -+ pwm_timer_fiq.divider = S3C2410_TCFG1_MUX3_DIV2; -+ /* default rate == ~32us */ -+ pwm_timer_fiq.counter = pwm_timer_fiq.comparer = 3000; -+ -+ rc = s3c2410_pwm_enable(&pwm_timer_fiq); -+ if (rc) -+ goto bail; -+ -+ s3c2410_pwm_start(&pwm_timer_fiq); -+ -+ _fiq_timer_divisor = 0xffff; /* so kick will work initially */ -+ -+ /* let our selected interrupt be a magic FIQ interrupt */ -+ __raw_writel(_fiq_ack_mask, S3C2410_INTMOD); -+ -+ /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */ -+ local_fiq_enable(); -+bail: -+ return rc; -+} -+ -+ -+/* call this from your kernel module to disable generation of FIQ actions */ -+static void fiq_disable_irq_source(void) -+{ -+ /* nothing makes FIQ any more */ -+ __raw_writel(0, S3C2410_INTMOD); -+ local_fiq_disable(); -+ _fiq_irq = 0; /* no active source interrupt now either */ -+} -+ -+/* -+ * fiq_kick() forces a FIQ event to happen shortly after leaving the routine -+ */ -+void fiq_kick(void) -+{ -+ unsigned long flags; -+ u32 tcon; -+ -+ if (!fiq_ready) { -+ printk(KERN_ERR "fiq_kick called before fiq probed\n"); -+ return; -+ } -+ -+ /* we have to take care about FIQ because this modification is -+ * non-atomic, FIQ could come in after the read and before the -+ * writeback and its changes to the register would be lost -+ * (platform INTMSK mod code is taken care of already) -+ */ -+ local_save_flags(flags); -+ local_fiq_disable(); -+ /* allow FIQs to resume */ -+ __raw_writel(__raw_readl(S3C2410_INTMSK) & -+ ~(1 << (_fiq_irq - S3C2410_CPUIRQ_OFFSET)), -+ S3C2410_INTMSK); -+ tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START; -+ /* fake the timer to a count of 1 */ -+ __raw_writel(1, S3C2410_TCNTB(_fiq_timer_index)); -+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON); -+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START, -+ S3C2410_TCON); -+ __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON); -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(fiq_kick); -+ -+ -+ -+ -+static int __init sc32440_fiq_probe(struct platform_device *pdev) -+{ -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ struct sc32440_fiq_platform_data *pdata = pdev->dev.platform_data; -+ int ret; -+ -+ if (!r) -+ return -EIO; -+ -+ /* configure for the interrupt we are meant to use */ -+ printk(KERN_INFO "Enabling FIQ using irq %d\n", r->start); -+ -+ fiq_set_vector_and_regs(); -+ fiq_init_irq_source(r->start); -+ -+ ret = sysfs_create_group(&pdev->dev.kobj, &s3c2440_fiq_attr_group); -+ if (ret) -+ return ret; -+ -+ fiq_ready = 1; -+ -+ /* -+ * if wanted, users can defer registration of devices -+ * that depend on FIQ until after we register, and can use our -+ * device as parent so suspend-resume ordering is correct -+ */ -+ if (pdata->attach_child_devices) -+ (pdata->attach_child_devices)(&pdev->dev); -+ -+ return 0; -+} -+ -+static int sc32440_fiq_remove(struct platform_device *pdev) -+{ -+ fiq_disable_irq_source(); -+ sysfs_remove_group(&pdev->dev.kobj, &s3c2440_fiq_attr_group); -+ -+ return 0; -+} -+ -+static void fiq_set_vector_and_regs(void) -+{ -+ struct pt_regs regs; -+ -+ /* prep the special FIQ mode regs */ -+ memset(®s, 0, sizeof(regs)); -+ regs.ARM_r8 = (unsigned long)s3c2440_fiq_isr; -+ regs.ARM_r10 = FIQ_VECTOR + SIZEOF_FIQ_JUMP; -+ regs.ARM_sp = FIQ_VECTOR + SIZEOF_FIQ_JUMP + FIQ_STACK_SIZE - 4; -+ -+ /* copy our jump to the real ISR into the hard vector address */ -+ set_fiq_handler(s3c2440_FIQ_Branch, SIZEOF_FIQ_JUMP); -+ -+ /* set up the special FIQ-mode-only registers from our regs */ -+ set_fiq_regs(®s); -+} -+ -+#ifdef CONFIG_PM -+static int sc32440_fiq_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ /* nothing makes FIQ any more */ -+ __raw_writel(0, S3C2410_INTMOD); -+ local_fiq_disable(); -+ -+ return 0; -+} -+ -+static int sc32440_fiq_resume(struct platform_device *pdev) -+{ -+ fiq_set_vector_and_regs(); -+ fiq_init_irq_source(_fiq_irq); -+ return 0; -+} -+#else -+#define sc32440_fiq_suspend NULL -+#define sc32440_fiq_resume NULL -+#endif -+ -+static struct platform_driver sc32440_fiq_driver = { -+ .driver = { -+ .name = "sc32440_fiq", -+ .owner = THIS_MODULE, -+ }, -+ -+ .probe = sc32440_fiq_probe, -+ .remove = __devexit_p(sc32440_fiq_remove), -+ .suspend = sc32440_fiq_suspend, -+ .resume = sc32440_fiq_resume, -+}; -+ -+static int __init sc32440_fiq_init(void) -+{ -+ fiq_set_vector_and_regs(); -+ -+ return platform_driver_register(&sc32440_fiq_driver); -+} -+ -+static void __exit sc32440_fiq_exit(void) -+{ -+ fiq_disable_irq_source(); -+} -+ -+MODULE_AUTHOR("Andy Green "); -+MODULE_LICENSE("GPL"); -+ -+module_init(sc32440_fiq_init); -+module_exit(sc32440_fiq_exit); -Index: linux-2.6.28/arch/arm/mach-s3c2440/fiq_c_isr.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/fiq_c_isr.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,76 @@ -+#ifndef _LINUX_FIQ_C_ISR_H -+#define _LINUX_FIQ_C_ISR_H -+ -+#include -+#include -+ -+extern unsigned long _fiq_count_fiqs; -+extern u32 _fiq_ack_mask; -+extern int _fiq_timer_index; -+extern u16 _fiq_timer_divisor; -+ -+/* platform data */ -+ -+struct sc32440_fiq_platform_data { -+ /* -+ * give an opportunity to use us as parent for -+ * devices that depend on us -+ */ -+ void (*attach_child_devices)(struct device *parent_device); -+}; -+ -+/* This CANNOT be implemented in a module -- it has to be used in code -+ * included in the monolithic kernel -+ */ -+ -+#define FIQ_HANDLER_START() \ -+void __attribute__ ((naked)) s3c2440_fiq_isr(void) \ -+{\ -+ /*\ -+ * you can declare local vars here, take care to set the frame size\ -+ * below accordingly if there are more than a few dozen bytes of them\ -+ */\ -+ -+/* stick your locals here :-) -+ * Do NOT initialize them here! define them and initialize them after -+ * FIQ_HANDLER_ENTRY() is done. -+ */ -+ -+#define FIQ_HANDLER_ENTRY(LOCALS, FRAME) \ -+ const int _FIQ_FRAME_SIZE = FRAME; \ -+ /* entry takes care to store registers we will be treading on here */\ -+ asm __volatile__ (\ -+ /* stash FIQ and r0-r8 normal regs */\ -+ "stmdb sp!, {r0-r12, lr};"\ -+ /* allow SP to get some space */\ -+ "sub sp, sp, %1 ;"\ -+ /* !! THIS SETS THE FRAME, adjust to > sizeof locals */\ -+ "sub fp, sp, %0 ;"\ -+ :\ -+ : "rI" (LOCALS), "rI" (FRAME)\ -+ :"r9"\ -+ ); -+ -+/* stick your ISR code here and then end with... */ -+ -+#define FIQ_HANDLER_END() \ -+ _fiq_count_fiqs++;\ -+ __raw_writel(_fiq_ack_mask, S3C2410_SRCPND);\ -+\ -+ /* exit back to normal mode restoring everything */\ -+ asm __volatile__ (\ -+ /* pop our allocation */\ -+ "add sp, sp, %0 ;"\ -+ /* return FIQ regs back to pristine state\ -+ * and get normal regs back\ -+ */\ -+ "ldmia sp!, {r0-r12, lr};"\ -+\ -+ /* return */\ -+ "subs pc, lr, #4;"\ -+ : \ -+ : "rI" (_FIQ_FRAME_SIZE) \ -+ );\ -+} -+ -+#endif /* _LINUX_FIQ_C_ISR_H */ -Index: linux-2.6.28/arch/arm/mach-s3c2440/Kconfig -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/Kconfig 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -22,12 +22,20 @@ config S3C2440_DMA - help - Support for S3C2440 specific DMA code5A - -+config S3C2440_C_FIQ -+ bool "FIQ ISR support in C" -+ depends on ARCH_S3C2410 -+ select FIQ -+ help -+ Support for S3C2440 FIQ support in C -- see -+ ./arch/arm/mach-s3c2440/fiq_c_isr.c - - menu "S3C2440 Machines" - - config MACH_ANUBIS - bool "Simtec Electronics ANUBIS" - select CPU_S3C2440 -+ select S3C24XX_DCLK - select PM_SIMTEC if PM - select HAVE_PATA_PLATFORM - help -@@ -37,6 +45,7 @@ config MACH_ANUBIS - config MACH_OSIRIS - bool "Simtec IM2440D20 (OSIRIS) module" - select CPU_S3C2440 -+ select S3C24XX_DCLK - select PM_SIMTEC if PM - help - Say Y here if you are using the Simtec IM2440D20 module, also -@@ -74,5 +83,30 @@ config MACH_AT2440EVB - help - Say Y here if you are using the AT2440EVB development board - -+config MACH_NEO1973_GTA02 -+ bool "FIC Neo1973 GSM Phone (GTA02 Hardware)" -+ select CPU_S3C2442 -+ select MFD_PCF50633 -+ select INPUT_PCF50633_PMU -+ select PCF50633_ADC -+ select PCF50633_GPIO -+ select RTC_DRV_PCF50633 -+ select REGULATOR_PCF50633 -+ select CHARGER_PCF50633 -+ select POWER_SUPPLY -+ select GTA02_HDQ -+ select MACH_NEO1973 -+ help -+ Say Y here if you are using the FIC Neo1973 GSM Phone -+ -+config NEO1973_GTA02_2440 -+ bool "Old FIC Neo1973 GTA02 hardware using S3C2440 CPU" -+ depends on MACH_NEO1973_GTA02 -+ select CPU_S3C2440 -+ help -+ Say Y here if you are using an early hardware revision -+ of the FIC/Openmoko Neo1973 GTA02 GSM Phone. -+ - endmenu - -+#source "arch/arm/mach-s3c2440/camera/Kconfig" -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-anubis.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-anubis.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-anubis.c 2009-01-02 00:01:56.000000000 +0100 -@@ -39,7 +39,8 @@ - #include - #include - #include --#include -+#include -+#include - - #include - #include -@@ -404,7 +405,7 @@ static struct platform_device *anubis_de - &s3c_device_usb, - &s3c_device_wdt, - &s3c_device_adc, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &anubis_device_ide0, -@@ -468,6 +469,7 @@ static void __init anubis_map_io(void) - - static void __init anubis_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); - - i2c_register_board_info(0, anubis_i2c_devs, -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-at2440evb.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-at2440evb.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-at2440evb.c 2009-01-02 00:01:56.000000000 +0100 -@@ -35,7 +35,8 @@ - #include - #include - #include --#include -+#include -+#include - - #include - #include -@@ -166,7 +167,7 @@ static struct platform_device *at2440evb - &s3c_device_usb, - &s3c_device_wdt, - &s3c_device_adc, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &at2440evb_device_eth, -@@ -183,6 +184,7 @@ static void __init at2440evb_map_io(void - - static void __init at2440evb_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); - } - -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-gta02.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-gta02.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,1778 @@ -+/* -+ * linux/arch/arm/mach-s3c2440/mach-gta02.c -+ * -+ * S3C2440 Machine Support for the FIC GTA02 (Neo1973) -+ * -+ * Copyright (C) 2006-2007 by Openmoko, Inc. -+ * Author: Harald Welte -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+#include "fiq_c_isr.h" -+#include -+#include -+ -+#include -+ -+#include "../plat-s3c24xx/neo1973_pm_gps.h" -+ -+#include -+#include -+#include -+#include -+ -+/* arbitrates which sensor IRQ owns the shared SPI bus */ -+static spinlock_t motion_irq_lock; -+ -+/* define FIQ IPC struct */ -+/* -+ * contains stuff FIQ ISR modifies and normal kernel code can see and use -+ * this is defined in , you should customize -+ * the definition in there and include the same definition in your kernel -+ * module that wants to interoperate with your FIQ code. -+ */ -+struct fiq_ipc fiq_ipc; -+EXPORT_SYMBOL(fiq_ipc); -+ -+#define DIVISOR_FROM_US(x) ((x) << 3) -+ -+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100) -+ -+#ifdef CONFIG_GTA02_HDQ -+/* HDQ specific */ -+#define HDQ_SAMPLE_PERIOD_US 20 -+/* private HDQ FSM state -- all other info interesting for caller in fiq_ipc */ -+static enum hdq_bitbang_states hdq_state; -+static u8 hdq_ctr; -+static u8 hdq_ctr2; -+static u8 hdq_bit; -+static u8 hdq_shifter; -+static u8 hdq_tx_data_done; -+ -+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US) -+#endif -+/* define FIQ ISR */ -+ -+FIQ_HANDLER_START() -+/* define your locals here -- no initializers though */ -+ u16 divisor; -+FIQ_HANDLER_ENTRY(64, 64) -+/* Your ISR here :-) */ -+ divisor = 0xffff; -+ -+ /* Vibrator servicing */ -+ -+ if (fiq_ipc.vib_pwm_latched || fiq_ipc.vib_pwm) { /* not idle */ -+ if (((u8)_fiq_count_fiqs) == fiq_ipc.vib_pwm_latched) -+ neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 0); -+ if (((u8)_fiq_count_fiqs) == 0) { -+ fiq_ipc.vib_pwm_latched = fiq_ipc.vib_pwm; -+ if (fiq_ipc.vib_pwm_latched) -+ neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 1); -+ } -+ divisor = FIQ_DIVISOR_VIBRATOR; -+ } -+ -+#ifdef CONFIG_GTA02_HDQ -+ /* HDQ servicing */ -+ -+ switch (hdq_state) { -+ case HDQB_IDLE: -+ if (fiq_ipc.hdq_request_ctr == fiq_ipc.hdq_transaction_ctr) -+ break; -+ hdq_ctr = 210 / HDQ_SAMPLE_PERIOD_US; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0); -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_OUTPUT); -+ hdq_tx_data_done = 0; -+ hdq_state = HDQB_TX_BREAK; -+ break; -+ -+ case HDQB_TX_BREAK: /* issue low for > 190us */ -+ if (--hdq_ctr == 0) { -+ hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_TX_BREAK_RECOVERY; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ } -+ break; -+ -+ case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */ -+ if (--hdq_ctr) -+ break; -+ hdq_shifter = fiq_ipc.hdq_ads; -+ hdq_bit = 8; /* 8 bits of ads / rw */ -+ hdq_tx_data_done = 0; /* doing ads */ -+ /* fallthru on last one */ -+ case HDQB_ADS_CALC: -+ if (hdq_shifter & 1) -+ hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US; -+ else -+ hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US; -+ /* carefully precompute the other phase length */ -+ hdq_ctr2 = (210 - (hdq_ctr * HDQ_SAMPLE_PERIOD_US)) / -+ HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_ADS_LOW; -+ hdq_shifter >>= 1; -+ hdq_bit--; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 0); -+ break; -+ -+ case HDQB_ADS_LOW: -+ if (--hdq_ctr) -+ break; -+ s3c2410_gpio_setpin(fiq_ipc.hdq_gpio_pin, 1); -+ hdq_state = HDQB_ADS_HIGH; -+ break; -+ -+ case HDQB_ADS_HIGH: -+ if (--hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */ -+ break; -+ if (hdq_bit) { /* more bits to do */ -+ hdq_state = HDQB_ADS_CALC; -+ break; -+ } -+ /* no more bits, wait it out until hdq_ctr2 exhausted */ -+ if (hdq_ctr2) -+ break; -+ /* ok no more bits and very last state */ -+ hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; -+ /* FIXME 0 = read */ -+ if (fiq_ipc.hdq_ads & 0x80) { /* write the byte out */ -+ /* set delay before payload */ -+ hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US; -+ /* already high, no need to write */ -+ hdq_state = HDQB_WAIT_TX; -+ break; -+ } -+ /* read the next byte */ -+ hdq_bit = 8; /* 8 bits of data */ -+ hdq_ctr = 3000 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_WAIT_RX; -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT); -+ break; -+ -+ case HDQB_WAIT_TX: /* issue low for > 40us */ -+ if (--hdq_ctr) -+ break; -+ if (!hdq_tx_data_done) { /* was that the data sent? */ -+ hdq_tx_data_done++; -+ hdq_shifter = fiq_ipc.hdq_tx_data; -+ hdq_bit = 8; /* 8 bits of data */ -+ hdq_state = HDQB_ADS_CALC; /* start sending */ -+ break; -+ } -+ fiq_ipc.hdq_error = 0; -+ fiq_ipc.hdq_transaction_ctr = fiq_ipc.hdq_request_ctr; -+ hdq_state = HDQB_IDLE; /* all tx is done */ -+ /* idle in input mode, it's pulled up by 10K */ -+ s3c2410_gpio_cfgpin(fiq_ipc.hdq_gpio_pin, S3C2410_GPIO_INPUT); -+ break; -+ -+ case HDQB_WAIT_RX: /* wait for battery to talk to us */ -+ if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin) == 0) { -+ /* it talks to us! */ -+ hdq_ctr2 = 1; -+ hdq_bit = 8; /* 8 bits of data */ -+ /* timeout */ -+ hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_DATA_RX_LOW; -+ break; -+ } -+ if (--hdq_ctr == 0) { /* timed out, error */ -+ fiq_ipc.hdq_error = 1; -+ fiq_ipc.hdq_transaction_ctr = fiq_ipc.hdq_request_ctr; -+ hdq_state = HDQB_IDLE; /* abort */ -+ } -+ break; -+ -+ /* -+ * HDQ basically works by measuring the low time of the bit cell -+ * 32-50us --> '1', 80 - 145us --> '0' -+ */ -+ -+ case HDQB_DATA_RX_LOW: -+ if (s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) { -+ fiq_ipc.hdq_rx_data >>= 1; -+ if (hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US)) -+ fiq_ipc.hdq_rx_data |= 0x80; -+ -+ if (--hdq_bit == 0) { -+ fiq_ipc.hdq_error = 0; -+ fiq_ipc.hdq_transaction_ctr = -+ fiq_ipc.hdq_request_ctr; -+ -+ hdq_state = HDQB_IDLE; -+ } else -+ hdq_state = HDQB_DATA_RX_HIGH; -+ /* timeout */ -+ hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US; -+ hdq_ctr2 = 1; -+ break; -+ } -+ hdq_ctr2++; -+ if (--hdq_ctr) -+ break; -+ /* timed out, error */ -+ fiq_ipc.hdq_error = 2; -+ fiq_ipc.hdq_transaction_ctr = fiq_ipc.hdq_request_ctr; -+ hdq_state = HDQB_IDLE; /* abort */ -+ break; -+ -+ case HDQB_DATA_RX_HIGH: -+ if (!s3c2410_gpio_getpin(fiq_ipc.hdq_gpio_pin)) { -+ /* it talks to us! */ -+ hdq_ctr2 = 1; -+ /* timeout */ -+ hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US; -+ hdq_state = HDQB_DATA_RX_LOW; -+ break; -+ } -+ if (--hdq_ctr) -+ break; -+ /* timed out, error */ -+ fiq_ipc.hdq_error = 3; -+ fiq_ipc.hdq_transaction_ctr = fiq_ipc.hdq_request_ctr; -+ -+ /* we're in input mode already */ -+ hdq_state = HDQB_IDLE; /* abort */ -+ break; -+ } -+ -+ if (hdq_state != HDQB_IDLE) /* ie, not idle */ -+ if (divisor > FIQ_DIVISOR_HDQ) -+ divisor = FIQ_DIVISOR_HDQ; /* keep us going */ -+#endif -+ -+ /* disable further timer interrupts if nobody has any work -+ * or adjust rate according to who still has work -+ * -+ * CAUTION: it means forground code must disable FIQ around -+ * its own non-atomic S3C2410_INTMSK changes... not common -+ * thankfully and taken care of by the fiq-basis patch -+ */ -+ if (divisor == 0xffff) /* mask the fiq irq source */ -+ __raw_writel(__raw_readl(S3C2410_INTMSK) | _fiq_ack_mask, -+ S3C2410_INTMSK); -+ else /* still working, maybe at a different rate */ -+ __raw_writel(divisor, S3C2410_TCNTB(_fiq_timer_index)); -+ _fiq_timer_divisor = divisor; -+ -+FIQ_HANDLER_END() -+ -+ -+/* -+ * this gets called every 1ms when we paniced. -+ */ -+ -+static long gta02_panic_blink(long count) -+{ -+ long delay = 0; -+ static long last_blink; -+ static char led; -+ -+ if (count - last_blink < 100) /* 200ms period, fast blink */ -+ return 0; -+ -+ led ^= 1; -+ s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT); -+ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led); -+ -+ last_blink = count; -+ return delay; -+} -+ -+ -+/** -+ * returns PCB revision information in b9,b8 and b2,b1,b0 -+ * Pre-GTA02 A6 returns 0x000 -+ * GTA02 A6 returns 0x101 -+ * ... -+ */ -+ -+int gta02_get_pcb_revision(void) -+{ -+ int n; -+ int u = 0; -+ static unsigned long pinlist[] = { -+ GTA02_PCB_ID1_0, -+ GTA02_PCB_ID1_1, -+ GTA02_PCB_ID1_2, -+ GTA02_PCB_ID2_0, -+ GTA02_PCB_ID2_1, -+ }; -+ static int pin_offset[] = { -+ 0, 1, 2, 8, 9 -+ }; -+ -+ for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) { -+ /* -+ * set the PCB version GPIO to be pulled-down input -+ * force low briefly first -+ */ -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(pinlist[n], 0); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pinlist[n], 1); -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT); -+ -+ udelay(10); -+ -+ if (s3c2410_gpio_getpin(pinlist[n])) -+ u |= 1 << pin_offset[n]; -+ -+ /* -+ * when not being interrogated, all of the revision GPIO -+ * are set to output HIGH without pulldown so no current flows -+ * if they are NC or pulled up. -+ */ -+ s3c2410_gpio_setpin(pinlist[n], 1); -+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pinlist[n], 0); -+ } -+ -+ return u; -+} -+ -+struct platform_device gta02_version_device = { -+ .name = "neo1973-version", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_resume_reason_device = { -+ .name = "neo1973-resume", -+ .num_resources = 0, -+}; -+ -+struct platform_device gta02_memconfig_device = { -+ .name = "neo1973-memconfig", -+ .num_resources = 0, -+}; -+ -+static struct map_desc gta02_iodesc[] __initdata = { -+ { -+ .virtual = 0xe0000000, -+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), -+ .length = SZ_1M, -+ .type = MT_DEVICE -+ }, -+}; -+ -+#define UCON S3C2410_UCON_DEFAULT -+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -+ -+static struct s3c2410_uartcfg gta02_uartcfgs[] = { -+ [0] = { -+ .hwport = 0, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [1] = { -+ .hwport = 1, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ [2] = { -+ .hwport = 2, -+ .flags = 0, -+ .ucon = UCON, -+ .ulcon = ULCON, -+ .ufcon = UFCON, -+ }, -+ -+}; -+ -+/* BQ27000 Battery */ -+ -+static int gta02_get_charger_online_status(void) -+{ -+ struct pcf50633 *pcf = gta02_pcf_pdata.pcf; -+ -+ return pcf->mbc.usb_online; -+} -+ -+static int gta02_get_charger_active_status(void) -+{ -+ struct pcf50633 *pcf = gta02_pcf_pdata.pcf; -+ -+ return pcf->mbc.usb_active; -+} -+ -+ -+struct bq27000_platform_data bq27000_pdata = { -+ .name = "battery", -+ .rsense_mohms = 20, -+ .hdq_read = gta02hdq_read, -+ .hdq_write = gta02hdq_write, -+ .hdq_initialized = gta02hdq_initialized, -+ .get_charger_online_status = gta02_get_charger_online_status, -+ .get_charger_active_status = gta02_get_charger_active_status -+}; -+ -+struct platform_device bq27000_battery_device = { -+ .name = "bq27000-battery", -+ .dev = { -+ .platform_data = &bq27000_pdata, -+ }, -+}; -+ -+#define ADC_NOM_CHG_DETECT_1A 6 -+#define ADC_NOM_CHG_DETECT_USB 43 -+ -+static void -+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) -+{ -+ int ma; -+ -+ /* Interpret charger type */ -+ if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { -+ -+ /* Stop GPO driving out now that we have a IA charger */ -+ pcf50633_gpio_set(pcf, PCF50633_GPO, 0); -+ -+ ma = 1000; -+ } else -+ ma = 100; -+ -+ pcf50633_mbc_usb_curlim_set(pcf, ma); -+} -+ -+static struct delayed_work gta02_charger_work; -+static int gta02_usb_vbus_draw; -+ -+static void gta02_charger_worker(struct work_struct *work) -+{ -+ struct pcf50633 *pcf = gta02_pcf_pdata.pcf; -+ -+ if (gta02_usb_vbus_draw) { -+ pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw); -+ return; -+ } else { -+ pcf50633_adc_async_read(pcf, -+ PCF50633_ADCC1_MUX_ADCIN1, -+ PCF50633_ADCC1_AVERAGE_16, -+ gta02_configure_pmu_for_charger, NULL); -+ return; -+ } -+} -+ -+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) -+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) -+{ -+ if (irq == PCF50633_IRQ_USBINS) { -+ schedule_delayed_work(>a02_charger_work, -+ GTA02_CHARGER_CONFIGURE_TIMEOUT); -+ return; -+ } else if (irq == PCF50633_IRQ_USBREM) { -+ cancel_delayed_work_sync(>a02_charger_work); -+ gta02_usb_vbus_draw = 0; -+ } -+} -+ -+static struct platform_device gta01_pm_gps_dev = { -+ .name = "neo1973-pm-gps", -+}; -+ -+static struct platform_device gta01_pm_bt_dev = { -+ .name = "neo1973-pm-bt", -+}; -+ -+static struct platform_device gta02_pm_gsm_dev = { -+ .name = "neo1973-pm-gsm", -+}; -+ -+/* this is called when pc50633 is probed, unfortunately quite late in the -+ * day since it is an I2C bus device. Here we can belatedly define some -+ * platform devices with the advantage that we can mark the pcf50633 as the -+ * parent. This makes them get suspended and resumed with their parent -+ * the pcf50633 still around. -+ */ -+ -+static struct platform_device gta02_glamo_dev; -+static void mangle_glamo_res_by_system_rev(void); -+ -+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf); -+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id); -+ -+static struct platform_device gta02_pm_wlan_dev = { -+ .name = "gta02-pm-wlan", -+}; -+ -+static struct regulator_consumer_supply ldo4_consumers[] = { -+ { -+ .dev = >a01_pm_bt_dev.dev, -+ .supply = "BT_3V2", -+ }, -+}; -+ -+static struct regulator_consumer_supply ldo5_consumers[] = { -+ { -+ .dev = >a01_pm_gps_dev.dev, -+ .supply = "RF_3V", -+ }, -+}; -+ -+/* -+ * We need this dummy thing to fill the regulator consumers -+ */ -+static struct platform_device gta02_mmc_dev = { -+ /* details filled in by glamo core */ -+}; -+ -+static struct regulator_consumer_supply hcldo_consumers[] = { -+ { -+ .dev = >a02_mmc_dev.dev, -+ .supply = "SD_3V3", -+ }, -+}; -+ -+static char *gta02_batteries[] = { -+ "battery", -+}; -+ -+struct pcf50633_platform_data gta02_pcf_pdata = { -+ .resumers = { -+ [0] = PCF50633_INT1_USBINS | -+ PCF50633_INT1_USBREM | -+ PCF50633_INT1_ALARM, -+ [1] = PCF50633_INT2_ONKEYF, -+ [2] = PCF50633_INT3_ONKEY1S, -+ [3] = PCF50633_INT4_LOWSYS | -+ PCF50633_INT4_LOWBAT | -+ PCF50633_INT4_HIGHTMP, -+ }, -+ -+ .batteries = gta02_batteries, -+ .num_batteries = ARRAY_SIZE(gta02_batteries), -+ -+ .reg_init_data = { -+ [PCF50633_REGULATOR_AUTO] = { -+ .constraints = { -+ .min_uV = 3300000, -+ .max_uV = 3300000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .boot_on = 1, -+ .apply_uV = 1, -+ .state_mem = { -+ .enabled = 1, -+ }, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_DOWN1] = { -+ .constraints = { -+ .min_uV = 1300000, -+ .max_uV = 1600000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .boot_on = 1, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_DOWN2] = { -+ .constraints = { -+ .min_uV = 1800000, -+ .max_uV = 1800000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ .boot_on = 1, -+ .state_mem = { -+ .enabled = 1, -+ }, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_HCLDO] = { -+ .constraints = { -+ .min_uV = 2000000, -+ .max_uV = 3300000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, -+ .boot_on = 1, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = hcldo_consumers, -+ }, -+ [PCF50633_REGULATOR_LDO1] = { -+ .constraints = { -+ .min_uV = 1300000, -+ .max_uV = 1300000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_LDO2] = { -+ .constraints = { -+ .min_uV = 3300000, -+ .max_uV = 3300000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_LDO3] = { -+ .constraints = { -+ .min_uV = 3000000, -+ .max_uV = 3000000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_LDO4] = { -+ .constraints = { -+ .min_uV = 3200000, -+ .max_uV = 3200000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = ldo4_consumers, -+ }, -+ [PCF50633_REGULATOR_LDO5] = { -+ .constraints = { -+ .min_uV = 1500000, -+ .max_uV = 1500000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .apply_uV = 1, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = ldo5_consumers, -+ }, -+ [PCF50633_REGULATOR_LDO6] = { -+ .constraints = { -+ .min_uV = 0, -+ .max_uV = 3300000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ [PCF50633_REGULATOR_MEMLDO] = { -+ .constraints = { -+ .min_uV = 1800000, -+ .max_uV = 1800000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .state_mem = { -+ .enabled = 1, -+ }, -+ }, -+ .num_consumer_supplies = 0, -+ }, -+ -+ }, -+ .probe_done = gta02_pmu_attach_child_devices, -+ .regulator_registered = gta02_pmu_regulator_registered, -+ .mbc_event_callback = gta02_pmu_event_callback, -+}; -+ -+static void mangle_pmu_pdata_by_system_rev(void) -+{ -+ struct regulator_init_data *reg_init_data; -+ -+ reg_init_data = gta02_pcf_pdata.reg_init_data; -+ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ /* FIXME: this is only in v1 due to wrong PMU variant */ -+ reg_init_data[PCF50633_REGULATOR_DOWN2] -+ .constraints.state_mem.enabled = 1; -+ break; -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ reg_init_data[PCF50633_REGULATOR_LDO1] -+ .constraints.min_uV = 3300000; -+ reg_init_data[PCF50633_REGULATOR_LDO1] -+ .constraints.min_uV = 3300000; -+ reg_init_data[PCF50633_REGULATOR_LDO1] -+ .constraints.state_mem.enabled = 0; -+ -+ reg_init_data[PCF50633_REGULATOR_LDO5] -+ .constraints.min_uV = 3000000; -+ reg_init_data[PCF50633_REGULATOR_LDO5] -+ .constraints.max_uV = 3000000; -+ -+ reg_init_data[PCF50633_REGULATOR_LDO6] -+ .constraints.min_uV = 3000000; -+ reg_init_data[PCF50633_REGULATOR_LDO6] -+ .constraints.max_uV = 3000000; -+ reg_init_data[PCF50633_REGULATOR_LDO6] -+ .constraints.apply_uV = 1; -+ break; -+ default: -+ break; -+ } -+} -+ -+#ifdef CONFIG_GTA02_HDQ -+/* HDQ */ -+ -+static void gta02_hdq_attach_child_devices(struct device *parent_device) -+{ -+ switch (system_rev) { -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ bq27000_battery_device.dev.parent = parent_device; -+ platform_device_register(&bq27000_battery_device); -+ break; -+ default: -+ break; -+ } -+} -+ -+static struct resource gta02_hdq_resources[] = { -+ [0] = { -+ .start = GTA02v5_GPIO_HDQ, -+ .end = GTA02v5_GPIO_HDQ, -+ }, -+}; -+ -+struct gta02_hdq_platform_data gta02_hdq_platform_data = { -+ .attach_child_devices = gta02_hdq_attach_child_devices -+}; -+ -+struct platform_device gta02_hdq_device = { -+ .name = "gta02-hdq", -+ .num_resources = 1, -+ .resource = gta02_hdq_resources, -+ .dev = { -+ .platform_data = >a02_hdq_platform_data, -+ }, -+}; -+#endif -+ -+/* vibrator (child of FIQ) */ -+ -+static struct resource gta02_vibrator_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_VIBRATOR_ON, -+ .end = GTA02_GPIO_VIBRATOR_ON, -+ }, -+}; -+ -+static struct platform_device gta02_vibrator_dev = { -+ .name = "neo1973-vibrator", -+ .num_resources = ARRAY_SIZE(gta02_vibrator_resources), -+ .resource = gta02_vibrator_resources, -+}; -+ -+/* FIQ, used PWM regs, so not child of PWM */ -+ -+static void gta02_fiq_attach_child_devices(struct device *parent_device) -+{ -+#ifdef CONFIG_GTA02_HDQ -+ switch (system_rev) { -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ gta02_hdq_device.dev.parent = parent_device; -+ platform_device_register(>a02_hdq_device); -+ gta02_vibrator_dev.dev.parent = parent_device; -+ platform_device_register(>a02_vibrator_dev); -+ break; -+ default: -+ break; -+ } -+#endif -+} -+ -+ -+static struct resource sc32440_fiq_resources[] = { -+ [0] = { -+ .flags = IORESOURCE_IRQ, -+ .start = IRQ_TIMER3, -+ .end = IRQ_TIMER3, -+ }, -+}; -+ -+struct sc32440_fiq_platform_data gta02_sc32440_fiq_platform_data = { -+ .attach_child_devices = gta02_fiq_attach_child_devices -+}; -+ -+struct platform_device sc32440_fiq_device = { -+ .name = "sc32440_fiq", -+ .num_resources = 1, -+ .resource = sc32440_fiq_resources, -+ .dev = { -+ .platform_data = >a02_sc32440_fiq_platform_data, -+ }, -+}; -+ -+/* NOR Flash */ -+ -+#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ -+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ -+ -+static struct physmap_flash_data gta02_nor_flash_data = { -+ .width = 2, -+}; -+ -+static struct resource gta02_nor_flash_resource = { -+ .start = GTA02_FLASH_BASE, -+ .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device gta02_nor_flash = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev = { -+ .platform_data = >a02_nor_flash_data, -+ }, -+ .resource = >a02_nor_flash_resource, -+ .num_resources = 1, -+}; -+ -+ -+struct platform_device s3c24xx_pwm_device = { -+ .name = "s3c24xx_pwm", -+ .num_resources = 0, -+}; -+ -+static struct i2c_board_info gta02_i2c_devs[] __initdata = { -+ { -+ I2C_BOARD_INFO("pcf50633", 0x73), -+ .irq = GTA02_IRQ_PCF50633, -+ .platform_data = >a02_pcf_pdata, -+ }, -+}; -+ -+static struct s3c2410_nand_set gta02_nand_sets[] = { -+ [0] = { -+ .name = "neo1973-nand", -+ .nr_chips = 1, -+ .flags = S3C2410_NAND_BBT, -+ }, -+}; -+ -+/* choose a set of timings derived from S3C@2442B MCP54 -+ * data sheet (K5D2G13ACM-D075 MCP Memory) -+ */ -+ -+static struct s3c2410_platform_nand gta02_nand_info = { -+ .tacls = 0, -+ .twrph0 = 25, -+ .twrph1 = 15, -+ .nr_sets = ARRAY_SIZE(gta02_nand_sets), -+ .sets = gta02_nand_sets, -+ .software_ecc = 1, -+}; -+ -+ -+static void gta02_s3c_mmc_set_power(unsigned char power_mode, -+ unsigned short vdd) -+{ -+ gta02_wlan_power( -+ power_mode == MMC_POWER_ON || -+ power_mode == MMC_POWER_UP); -+} -+ -+ -+static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = { -+ .set_power = gta02_s3c_mmc_set_power, -+}; -+ -+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) -+{ -+ switch (cmd) { -+ case S3C2410_UDC_P_ENABLE: -+ printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__); -+ neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1); -+ break; -+ case S3C2410_UDC_P_DISABLE: -+ printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__); -+ neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0); -+ break; -+ case S3C2410_UDC_P_RESET: -+ printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__); -+ /* FIXME! */ -+ break; -+ default: -+ break; -+ } -+} -+ -+/* get PMU to set USB current limit accordingly */ -+ -+static void gta02_udc_vbus_draw(unsigned int ma) -+{ -+ if (!gta02_pcf_pdata.pcf) { -+ printk(KERN_ERR "********** NULL gta02_pcf_pdata.pcf *****\n"); -+ return; -+ } -+ -+ gta02_usb_vbus_draw = ma; -+ -+ schedule_delayed_work(>a02_charger_work, -+ GTA02_CHARGER_CONFIGURE_TIMEOUT); -+} -+ -+static struct s3c2410_udc_mach_info gta02_udc_cfg = { -+ .vbus_draw = gta02_udc_vbus_draw, -+ .udc_command = gta02_udc_command, -+ -+}; -+ -+ -+/* touchscreen configuration */ -+ -+static struct ts_filter_linear_configuration gta02_ts_linear_config = { -+ .constants = {1, 0, 0, 0, 1, 0, 1}, /* don't modify coords */ -+ .coord0 = 0, -+ .coord1 = 1, -+}; -+ -+static struct ts_filter_group_configuration gta02_ts_group_config = { -+ .extent = 12, -+ .close_enough = 10, -+ .threshold = 6, /* at least half of the points in a group */ -+ .attempts = 10, -+}; -+ -+static struct ts_filter_median_configuration gta02_ts_median_config = { -+ .extent = 20, -+ .decimation_below = 3, -+ .decimation_threshold = 8 * 3, -+ .decimation_above = 4, -+}; -+ -+static struct ts_filter_mean_configuration gta02_ts_mean_config = { -+ .bits_filter_length = 2, /* 4 points */ -+}; -+ -+static struct s3c2410_ts_mach_info gta02_ts_cfg = { -+ .delay = 10000, -+ .presc = 0xff, /* slow as we can go */ -+ .filter_sequence = { -+ [0] = &ts_filter_group_api, -+ [1] = &ts_filter_median_api, -+ [2] = &ts_filter_mean_api, -+ [3] = &ts_filter_linear_api, -+ }, -+ .filter_config = { -+ [0] = >a02_ts_group_config, -+ [1] = >a02_ts_median_config, -+ [2] = >a02_ts_mean_config, -+ [3] = >a02_ts_linear_config, -+ }, -+}; -+ -+ -+static void gta02_bl_set_intensity(int intensity) -+{ -+ struct pcf50633 *pcf = gta02_pcf_pdata.pcf; -+ int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); -+ int ret; -+ -+ intensity >>= 2; -+ -+ if (intensity == old_intensity) -+ return; -+ -+ /* We can't do this anywhere else */ -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5); -+ -+ if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3)) -+ old_intensity = 0; -+ -+ /* -+ * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60) -+ * if seen, you have to re-enable the LED unit -+ */ -+ if (!intensity || !old_intensity) -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0); -+ -+ if (!intensity) /* illegal to set LEDOUT to 0 */ -+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, -+ 2); -+ else -+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, -+ intensity); -+ -+ if (intensity) -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2); -+ -+} -+ -+static struct generic_bl_info gta02_bl_info = { -+ .name = "gta02-bl", -+ .max_intensity = 0xff, -+ .default_intensity = 0xff, -+ .set_bl_intensity = gta02_bl_set_intensity, -+}; -+ -+static struct platform_device gta02_bl_dev = { -+ .name = "generic-bl", -+ .id = 1, -+ .dev = { -+ .platform_data = >a02_bl_info, -+ }, -+}; -+ -+/* SPI: LCM control interface attached to Glamo3362 */ -+ -+static void gta02_jbt6k74_reset(int devidx, int level) -+{ -+ glamo_lcm_reset(level); -+} -+ -+static void gta02_jbt6k74_probe_completed(struct device *dev) -+{ -+ struct pcf50633 *pcf = gta02_pcf_pdata.pcf; -+ -+ /* Switch on backlight. Qi does not do it for us */ -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01); -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00); -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01); -+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01); -+ -+ gta02_bl_dev.dev.parent = dev; -+ platform_device_register(>a02_bl_dev); -+} -+ -+const struct jbt6k74_platform_data jbt6k74_pdata = { -+ .reset = gta02_jbt6k74_reset, -+ .probe_completed = gta02_jbt6k74_probe_completed, -+}; -+ -+static struct spi_board_info gta02_spi_board_info[] = { -+ { -+ .modalias = "jbt6k74", -+ /* platform_data */ -+ .platform_data = &jbt6k74_pdata, -+ /* controller_data */ -+ /* irq */ -+ .max_speed_hz = 100 * 1000, -+ .bus_num = 2, -+ /* chip_select */ -+ }, -+}; -+ -+#if 0 /* currently this is not used and we use gpio spi */ -+static struct glamo_spi_info glamo_spi_cfg = { -+ .board_size = ARRAY_SIZE(gta02_spi_board_info), -+ .board_info = gta02_spi_board_info, -+}; -+#endif /* 0 */ -+ -+static struct glamo_spigpio_info glamo_spigpio_cfg = { -+ .pin_clk = GLAMO_GPIO10_OUTPUT, -+ .pin_mosi = GLAMO_GPIO11_OUTPUT, -+ .pin_cs = GLAMO_GPIO12_OUTPUT, -+ .pin_miso = 0, -+ .board_size = ARRAY_SIZE(gta02_spi_board_info), -+ .board_info = gta02_spi_board_info, -+}; -+ -+/* SPI: Accelerometers attached to SPI of s3c244x */ -+ -+/* -+ * Situation is that Linux SPI can't work in an interrupt context, so we -+ * implement our own bitbang here. Arbitration is needed because not only -+ * can this interrupt happen at any time even if foreground wants to use -+ * the bitbang API from Linux, but multiple motion sensors can be on the -+ * same SPI bus, and multiple interrupts can happen. -+ * -+ * Foreground / interrupt arbitration is okay because the interrupts are -+ * disabled around all the foreground SPI code. -+ * -+ * Interrupt / Interrupt arbitration is evidently needed, otherwise we -+ * lose edge-triggered service after a while due to the two sensors sharing -+ * the SPI bus having irqs at the same time eventually. -+ * -+ * Servicing is typ 75 - 100us at 400MHz. -+ */ -+ -+/* #define DEBUG_SPEW_MS */ -+#define MG_PER_SAMPLE 18 -+ -+struct lis302dl_platform_data lis302_pdata_top; -+struct lis302dl_platform_data lis302_pdata_bottom; -+ -+/* -+ * generic SPI RX and TX bitbang -+ * only call with interrupts off! -+ */ -+ -+static void __gta02_lis302dl_bitbang(struct lis302dl_info *lis, u8 *tx, -+ int tx_bytes, u8 *rx, int rx_bytes) -+{ -+ struct lis302dl_platform_data *pdata = lis->pdata; -+ int n; -+ u8 shifter = 0; -+ unsigned long other_cs; -+ -+ /* -+ * Huh... "quirk"... CS on this device is not really "CS" like you can -+ * expect. -+ * -+ * When it is 0 it selects SPI interface mode. -+ * When it is 1 it selects I2C interface mode. -+ * -+ * Because we have 2 devices on one interface we have to make sure -+ * that the "disabled" device (actually in I2C mode) don't think we're -+ * talking to it. -+ * -+ * When we talk to the "enabled" device, the "disabled" device sees -+ * the clocks as I2C clocks, creating havoc. -+ * -+ * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we -+ * must ensure this is never issued. -+ */ -+ -+ if (&lis302_pdata_top == pdata) -+ other_cs = lis302_pdata_bottom.pin_chip_select; -+ else -+ other_cs = lis302_pdata_top.pin_chip_select; -+ -+ s3c2410_gpio_setpin(other_cs, 1); -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 0); -+ -+ /* send the register index, r/w and autoinc bits */ -+ for (n = 0; n < (tx_bytes << 3); n++) { -+ if (!(n & 7)) -+ shifter = ~tx[n >> 3]; -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_mosi, !(shifter & 0x80)); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ shifter <<= 1; -+ } -+ -+ for (n = 0; n < (rx_bytes << 3); n++) { /* 8 bits each */ -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ shifter <<= 1; -+ if (s3c2410_gpio_getpin(pdata->pin_miso)) -+ shifter |= 1; -+ if ((n & 7) == 7) -+ rx[n >> 3] = shifter; -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ } -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(other_cs, 1); -+} -+ -+ -+static int gta02_lis302dl_bitbang_read_reg(struct lis302dl_info *lis, u8 reg) -+{ -+ u8 data = 0xc0 | reg; /* read, autoincrement */ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ __gta02_lis302dl_bitbang(lis, &data, 1, &data, 1); -+ -+ local_irq_restore(flags); -+ -+ return data; -+} -+ -+static void gta02_lis302dl_bitbang_write_reg(struct lis302dl_info *lis, u8 reg, -+ u8 val) -+{ -+ u8 data[2] = { 0x00 | reg, val }; /* write, no autoincrement */ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ __gta02_lis302dl_bitbang(lis, &data[0], 2, NULL, 0); -+ -+ local_irq_restore(flags); -+ -+} -+ -+ -+void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume) -+{ -+ struct lis302dl_platform_data *pdata = lis->pdata; -+ -+ if (!resume) { -+ /* -+ * we don't want to power them with a high level -+ * because GSENSOR_3V3 is not up during suspend -+ */ -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 0); -+ s3c2410_gpio_setpin(pdata->pin_clk, 0); -+ s3c2410_gpio_setpin(pdata->pin_mosi, 0); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pdata->pin_miso, 1); -+ return; -+ } -+ -+ /* back to normal */ -+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1); -+ s3c2410_gpio_setpin(pdata->pin_clk, 1); -+ /* misnomer: it is a pullDOWN in 2442 */ -+ s3c2410_gpio_pullup(pdata->pin_miso, 0); -+ -+ s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT); -+ -+} -+ -+ -+ -+struct lis302dl_platform_data lis302_pdata_top = { -+ .name = "lis302-1 (top)", -+ .pin_chip_select= S3C2410_GPD12, -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .interrupt = GTA02_IRQ_GSENSOR_1, -+ .open_drain = 1, /* altered at runtime by PCB rev */ -+ .lis302dl_bitbang = __gta02_lis302dl_bitbang, -+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg, -+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg, -+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io, -+}; -+ -+struct lis302dl_platform_data lis302_pdata_bottom = { -+ .name = "lis302-2 (bottom)", -+ .pin_chip_select= S3C2410_GPD13, -+ .pin_clk = S3C2410_GPG7, -+ .pin_mosi = S3C2410_GPG6, -+ .pin_miso = S3C2410_GPG5, -+ .interrupt = GTA02_IRQ_GSENSOR_2, -+ .open_drain = 1, /* altered at runtime by PCB rev */ -+ .lis302dl_bitbang = __gta02_lis302dl_bitbang, -+ .lis302dl_bitbang_reg_read = gta02_lis302dl_bitbang_read_reg, -+ .lis302dl_bitbang_reg_write = gta02_lis302dl_bitbang_write_reg, -+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io, -+}; -+ -+ -+static struct platform_device s3c_device_spi_acc1 = { -+ .name = "lis302dl", -+ .id = 1, -+ .dev = { -+ .platform_data = &lis302_pdata_top, -+ }, -+}; -+ -+static struct platform_device s3c_device_spi_acc2 = { -+ .name = "lis302dl", -+ .id = 2, -+ .dev = { -+ .platform_data = &lis302_pdata_bottom, -+ }, -+}; -+ -+static struct resource gta02_led_resources[] = { -+ { -+ .name = "gta02-power:orange", -+ .start = GTA02_GPIO_PWR_LED1, -+ .end = GTA02_GPIO_PWR_LED1, -+ }, { -+ .name = "gta02-power:blue", -+ .start = GTA02_GPIO_PWR_LED2, -+ .end = GTA02_GPIO_PWR_LED2, -+ }, { -+ .name = "gta02-aux:red", -+ .start = GTA02_GPIO_AUX_LED, -+ .end = GTA02_GPIO_AUX_LED, -+ }, -+}; -+ -+struct platform_device gta02_led_dev = { -+ .name = "gta02-led", -+ .num_resources = ARRAY_SIZE(gta02_led_resources), -+ .resource = gta02_led_resources, -+}; -+ -+static struct resource gta02_button_resources[] = { -+ [0] = { -+ .start = GTA02_GPIO_AUX_KEY, -+ .end = GTA02_GPIO_AUX_KEY, -+ }, -+ [1] = { -+ .start = GTA02_GPIO_HOLD_KEY, -+ .end = GTA02_GPIO_HOLD_KEY, -+ }, -+ [2] = { -+ .start = GTA02_GPIO_JACK_INSERT, -+ .end = GTA02_GPIO_JACK_INSERT, -+ }, -+ [3] = { -+ .start = 0, -+ .end = 0, -+ }, -+ [4] = { -+ .start = 0, -+ .end = 0, -+ }, -+}; -+ -+static struct platform_device gta02_button_dev = { -+ .name = "neo1973-button", -+ .num_resources = ARRAY_SIZE(gta02_button_resources), -+ .resource = gta02_button_resources, -+}; -+ -+ -+static struct platform_device gta02_pm_usbhost_dev = { -+ .name = "neo1973-pm-host", -+}; -+ -+ -+/* USB */ -+static struct s3c2410_hcd_info gta02_usb_info = { -+ .port[0] = { -+ .flags = S3C_HCDFLG_USED, -+ }, -+ .port[1] = { -+ .flags = 0, -+ }, -+}; -+ -+static int glamo_irq_is_wired(void) -+{ -+ int rc; -+ int count = 0; -+ -+ /* -+ * GTA02 S-Media IRQs prior to A5 are broken due to a lack of -+ * a pullup on the INT# line. Check for the bad behaviour. -+ */ -+ s3c2410_gpio_setpin(S3C2410_GPG4, 0); -+ s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP); -+ s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP); -+ /* -+ * we force it low ourselves for a moment and resume being input. -+ * If there is a pullup, it won't stay low for long. But if the -+ * level converter is there as on < A5 revision, the weak keeper -+ * on the input of the LC will hold the line low indefinitiely -+ */ -+ do -+ rc = s3c2410_gpio_getpin(S3C2410_GPG4); -+ while ((!rc) && ((count++) < 10)); -+ if (rc) { /* it got pulled back up, it's good */ -+ printk(KERN_INFO "Detected S-Media IRQ# pullup, " -+ "enabling interrupt\n"); -+ return 0; -+ } else /* Gah we can't work with this level converter */ -+ printk(KERN_WARNING "** Detected bad IRQ# circuit found" -+ " on pre-A5 GTA02: S-Media interrupt disabled **\n"); -+ return -ENODEV; -+} -+ -+static int gta02_glamo_can_set_mmc_power(void) -+{ -+ switch (system_rev) { -+ case GTA02v3_SYSTEM_REV: -+ case GTA02v4_SYSTEM_REV: -+ case GTA02v5_SYSTEM_REV: -+ case GTA02v6_SYSTEM_REV: -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* Smedia Glamo 3362 */ -+ -+/* -+ * we crank down SD Card clock dynamically when GPS is powered -+ */ -+ -+static int gta02_glamo_mci_use_slow(void) -+{ -+ return neo1973_pm_gps_is_on(); -+} -+ -+static void gta02_glamo_external_reset(int level) -+{ -+ s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level); -+ s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT); -+} -+ -+static struct glamofb_platform_data gta02_glamo_pdata = { -+ .width = 43, -+ .height = 58, -+ /* 24.5MHz --> 40.816ns */ -+ .pixclock = 40816, -+ .left_margin = 8, -+ .right_margin = 16, -+ .upper_margin = 2, -+ .lower_margin = 16, -+ .hsync_len = 8, -+ .vsync_len = 2, -+ .fb_mem_size = 0x400000, /* glamo has 8 megs of SRAM. we use 4 */ -+ .xres = { -+ .min = 240, -+ .max = 640, -+ .defval = 480, -+ }, -+ .yres = { -+ .min = 320, -+ .max = 640, -+ .defval = 640, -+ }, -+ .bpp = { -+ .min = 16, -+ .max = 16, -+ .defval = 16, -+ }, -+ //.spi_info = &glamo_spi_cfg, -+ .spigpio_info = &glamo_spigpio_cfg, -+ -+ /* glamo MMC function platform data */ -+ .mmc_dev = >a02_mmc_dev, -+ .glamo_can_set_mci_power = gta02_glamo_can_set_mmc_power, -+ .glamo_mci_use_slow = gta02_glamo_mci_use_slow, -+ .glamo_irq_is_wired = glamo_irq_is_wired, -+ .glamo_external_reset = gta02_glamo_external_reset -+}; -+ -+static struct resource gta02_glamo_resources[] = { -+ [0] = { -+ .start = S3C2410_CS1, -+ .end = S3C2410_CS1 + 0x1000000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = GTA02_IRQ_3D, -+ .end = GTA02_IRQ_3D, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [2] = { -+ .start = GTA02v1_GPIO_3D_RESET, -+ .end = GTA02v1_GPIO_3D_RESET, -+ }, -+}; -+ -+static struct platform_device gta02_glamo_dev = { -+ .name = "glamo3362", -+ .num_resources = ARRAY_SIZE(gta02_glamo_resources), -+ .resource = gta02_glamo_resources, -+ .dev = { -+ .platform_data = >a02_glamo_pdata, -+ }, -+}; -+ -+static void mangle_glamo_res_by_system_rev(void) -+{ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ break; -+ default: -+ gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET; -+ gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET; -+ break; -+ } -+ -+ switch (system_rev) { -+ case GTA02v1_SYSTEM_REV: -+ case GTA02v2_SYSTEM_REV: -+ case GTA02v3_SYSTEM_REV: -+ /* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */ -+ /* The hardware is missing a pull-up resistor and thus can't -+ * support the Smedia Glamo IRQ */ -+ gta02_glamo_resources[1].start = 0; -+ gta02_glamo_resources[1].end = 0; -+ break; -+ } -+} -+ -+static void __init gta02_map_io(void) -+{ -+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); -+ s3c24xx_init_clocks(12000000); -+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); -+} -+ -+static irqreturn_t gta02_modem_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "modem wakeup interrupt\n"); -+ gta_gsm_interrupts++; -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t ar6000_wow_irq(int irq, void *param) -+{ -+ printk(KERN_DEBUG "ar6000_wow interrupt\n"); -+ return IRQ_HANDLED; -+} -+ -+/* -+ * hardware_ecc=1|0 -+ */ -+static char hardware_ecc_str[4] __initdata = ""; -+ -+static int __init hardware_ecc_setup(char *str) -+{ -+ if (str) -+ strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str)); -+ return 1; -+} -+ -+__setup("hardware_ecc=", hardware_ecc_setup); -+ -+/* these are the guys that don't need to be children of PMU */ -+ -+static struct platform_device *gta02_devices[] __initdata = { -+ >a02_version_device, -+ &s3c_device_usb, -+ &s3c_device_wdt, -+ >a02_memconfig_device, -+ &s3c_device_sdi, -+ &s3c_device_usbgadget, -+ &s3c_device_nand, -+ >a02_nor_flash, -+ -+ &sc32440_fiq_device, -+ &s3c24xx_pwm_device, -+ >a02_led_dev, -+ >a02_pm_wlan_dev, /* not dependent on PMU */ -+ -+ &s3c_device_iis, -+ &s3c_device_i2c0, -+}; -+ -+/* these guys DO need to be children of PMU */ -+ -+static struct platform_device *gta02_devices_pmu_children[] = { -+ &s3c_device_ts, /* input 1 */ -+ >a02_pm_gsm_dev, -+ >a02_pm_usbhost_dev, -+ &s3c_device_spi_acc1, /* input 2 */ -+ &s3c_device_spi_acc2, /* input 3 */ -+ >a02_button_dev, /* input 4 */ -+ >a02_resume_reason_device, -+}; -+ -+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id) -+{ -+ struct platform_device *regulator, *pdev; -+ -+ regulator = pcf->pmic.pdev[id]; -+ -+ switch(id) { -+ case PCF50633_REGULATOR_LDO4: -+ pdev = >a01_pm_bt_dev; -+ break; -+ case PCF50633_REGULATOR_LDO5: -+ pdev = >a01_pm_gps_dev; -+ break; -+ case PCF50633_REGULATOR_HCLDO: -+ pdev = >a02_glamo_dev; -+ break; -+ default: -+ return; -+ } -+ -+ pdev->dev.parent = ®ulator->dev; -+ platform_device_register(pdev); -+} -+ -+/* this is called when pc50633 is probed, unfortunately quite late in the -+ * day since it is an I2C bus device. Here we can belatedly define some -+ * platform devices with the advantage that we can mark the pcf50633 as the -+ * parent. This makes them get suspended and resumed with their parent -+ * the pcf50633 still around. -+ */ -+ -+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf) -+{ -+ int n; -+ -+ for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) -+ gta02_devices_pmu_children[n]->dev.parent = pcf->dev; -+ -+ mangle_glamo_res_by_system_rev(); -+ platform_add_devices(gta02_devices_pmu_children, -+ ARRAY_SIZE(gta02_devices_pmu_children)); -+} -+ -+ -+static void __init gta02_machine_init(void) -+{ -+ int rc; -+ -+ /* set the panic callback to make AUX blink fast */ -+ panic_blink = gta02_panic_blink; -+ -+ switch (system_rev) { -+ case GTA02v6_SYSTEM_REV: -+ /* we need push-pull interrupt from motion sensors */ -+ lis302_pdata_top.open_drain = 0; -+ lis302_pdata_bottom.open_drain = 0; -+ break; -+ default: -+ break; -+ } -+ -+ spin_lock_init(&motion_irq_lock); -+ INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); -+ -+ /* Glamo chip select optimization */ -+/* *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */ -+ -+ /* do not force soft ecc if we are asked to use hardware_ecc */ -+ if (hardware_ecc_str[0] == '1') -+ gta02_nand_info.software_ecc = 0; -+ -+ s3c_device_usb.dev.platform_data = >a02_usb_info; -+ s3c_device_nand.dev.platform_data = >a02_nand_info; -+ s3c_device_sdi.dev.platform_data = >a02_s3c_mmc_cfg; -+ -+ /* acc sensor chip selects */ -+ s3c2410_gpio_setpin(S3C2410_GPD12, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT); -+ s3c2410_gpio_setpin(S3C2410_GPD13, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT); -+ -+ s3c24xx_udc_set_platdata(>a02_udc_cfg); -+ s3c_i2c0_set_platdata(NULL); -+ set_s3c2410ts_info(>a02_ts_cfg); -+ -+ mangle_glamo_res_by_system_rev(); -+ -+ i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); -+ -+ mangle_pmu_pdata_by_system_rev(); -+ -+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); -+ -+ s3c_pm_init(); -+ -+ /* Make sure the modem can wake us up */ -+ set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING); -+ rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED, -+ "modem", NULL); -+ if (rc < 0) -+ printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n"); -+ enable_irq_wake(GTA02_IRQ_MODEM); -+ -+ /* Make sure the wifi module can wake us up*/ -+ set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING); -+ rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED, -+ "ar6000", NULL); -+ -+ if (rc < 0) -+ printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n"); -+ enable_irq_wake(GTA02_IRQ_WLAN_GPIO1); -+} -+ -+void DEBUG_LED(int n) -+{ -+// int *p = NULL; -+ switch (n) { -+ case 0: -+ neo1973_gpb_setpin(GTA02_GPIO_PWR_LED1, 1); -+ break; -+ case 1: -+ neo1973_gpb_setpin(GTA02_GPIO_PWR_LED2, 1); -+ break; -+ default: -+ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, 1); -+ break; -+ } -+// printk(KERN_ERR"die %d\n", *p); -+} -+EXPORT_SYMBOL_GPL(DEBUG_LED); -+ -+MACHINE_START(NEO1973_GTA02, "GTA02") -+ .phys_io = S3C2410_PA_UART, -+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -+ .boot_params = S3C2410_SDRAM_PA + 0x100, -+ .map_io = gta02_map_io, -+ .init_irq = s3c24xx_init_irq, -+ .init_machine = gta02_machine_init, -+ .timer = &s3c24xx_timer, -+MACHINE_END -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-nexcoder.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-nexcoder.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-nexcoder.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,6 +37,7 @@ - //#include - #include - #include -+#include - - #include - #include -@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_ - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_rtc, - &s3c_device_camif, -@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void) - - static void __init nexcoder_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); - }; - -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-osiris.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-osiris.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-osiris.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,7 +37,8 @@ - #include - #include - #include --#include -+#include -+#include - - #include - #include -@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_ - /* Standard Osiris devices */ - - static struct platform_device *osiris_devices[] __initdata = { -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_wdt, - &s3c_device_nand, - &osiris_pcmcia, -@@ -398,6 +399,8 @@ static void __init osiris_init(void) - sysdev_class_register(&osiris_pm_sysclass); - sysdev_register(&osiris_pm_sysdev); - -+ s3c_i2c0_set_platdata(NULL); -+ - i2c_register_board_info(0, osiris_i2c_devs, - ARRAY_SIZE(osiris_i2c_devs)); - -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-rx3715.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-rx3715.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-rx3715.c 2009-01-02 00:01:56.000000000 +0100 -@@ -42,7 +42,7 @@ - #include - - #include --#include -+#include - #include - - #include -@@ -179,7 +179,7 @@ static struct platform_device *rx3715_de - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - &s3c_device_nand, - }; -@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(v - #ifdef CONFIG_PM_H1940 - memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); - #endif -- s3c2410_pm_init(); -+ s3c_pm_init(); - - s3c24xx_fb_set_platdata(&rx3715_fb_info); - platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); -Index: linux-2.6.28/arch/arm/mach-s3c2440/mach-smdk2440.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/mach-smdk2440.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/mach-smdk2440.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,6 +37,7 @@ - - #include - #include -+#include - - #include - #include -@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_ - &s3c_device_usb, - &s3c_device_lcd, - &s3c_device_wdt, -- &s3c_device_i2c, -+ &s3c_device_i2c0, - &s3c_device_iis, - }; - -@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void) - static void __init smdk2440_machine_init(void) - { - s3c24xx_fb_set_platdata(&smdk2440_fb_info); -+ s3c_i2c0_set_platdata(NULL); - - platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); - smdk_machine_init(); -Index: linux-2.6.28/arch/arm/mach-s3c2440/Makefile -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/Makefile 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/Makefile 2009-01-02 00:01:56.000000000 +0100 -@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o d - obj-$(CONFIG_CPU_S3C2440) += irq.o - obj-$(CONFIG_CPU_S3C2440) += clock.o - obj-$(CONFIG_S3C2440_DMA) += dma.o -+obj-$(CONFIG_S3C2440_C_FIQ) += fiq_c_isr.o - - # Machine support - -@@ -22,3 +23,6 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715 - obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o - obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o - obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o -+obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o -+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o -+ -Index: linux-2.6.28/arch/arm/mach-s3c2440/s3c2440.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2440/s3c2440.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2440/s3c2440.c 2009-01-02 00:01:56.000000000 +0100 -@@ -46,6 +46,9 @@ int __init s3c2440_init(void) - s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; - s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; - -+ /* make sure SD/MMC driver can distinguish 2440 from 2410 */ -+ s3c_device_sdi.name = "s3c2440-sdi"; -+ - /* register our system device for everything else */ - - return sysdev_register(&s3c2440_sysdev); -Index: linux-2.6.28/arch/arm/mach-s3c2442/Kconfig -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2442/Kconfig 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2442/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -6,10 +6,11 @@ - - config CPU_S3C2442 - bool -- depends on ARCH_S3C2410 -+ depends on CPU_S3C2440 - select S3C2410_CLOCK - select S3C2410_GPIO - select S3C2410_PM if PM -+ select S3C2440_DMA if S3C2410_DMA - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help -Index: linux-2.6.28/arch/arm/mach-s3c2442/s3c2442.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2442/s3c2442.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2442/s3c2442.c 2009-01-02 00:01:56.000000000 +0100 -@@ -21,6 +21,7 @@ - - #include - #include -+#include - - static struct sys_device s3c2442_sysdev = { - .cls = &s3c2442_sysclass, -@@ -30,5 +31,8 @@ int __init s3c2442_init(void) - { - printk("S3C2442: Initialising architecture\n"); - -+ /* make sure SD/MMC driver can distinguish 2440 from 2410 */ -+ s3c_device_sdi.name = "s3c2440-sdi"; -+ - return sysdev_register(&s3c2442_sysdev); - } -Index: linux-2.6.28/arch/arm/mach-s3c2443/clock.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2443/clock.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2443/clock.c 2009-01-02 00:01:56.000000000 +0100 -@@ -39,6 +39,8 @@ - - #include - -+#include -+ - #include - #include - #include -@@ -145,12 +147,6 @@ static unsigned long s3c2443_roundrate_c - - /* clock selections */ - --/* CPU EXTCLK input */ --static struct clk clk_ext = { -- .name = "ext", -- .id = -1, --}; -- - static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -@@ -165,14 +161,6 @@ static struct clk clk_mpll = { - }; - #endif - --static struct clk clk_epllref; -- --static struct clk clk_epll = { -- .name = "epll", -- .parent = &clk_epllref, -- .id = -1, --}; -- - static struct clk clk_i2s_ext = { - .name = "i2s-ext", - .id = -1, -@@ -1011,22 +999,20 @@ static struct clk *clks[] __initdata = { - &clk_prediv, - }; - --void __init s3c2443_init_clocks(int xtal) -+void __init_or_cpufreq s3c2443_setup_clocks(void) - { -- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); -+ struct clk *xtal_clk; -+ unsigned long xtal; - unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; -- struct clk *clkp; -- int ret; -- int ptr; - -- /* s3c2443 parents h and p clocks from prediv */ -- clk_h.parent = &clk_prediv; -- clk_p.parent = &clk_prediv; -+ xtal_clk = clk_get(NULL, "xtal"); -+ xtal = clk_get_rate(xtal_clk); -+ clk_put(xtal_clk); - - pll = s3c2443_get_mpll(mpllcon, xtal); - clk_msysclk.rate = pll; -@@ -1036,13 +1022,29 @@ void __init s3c2443_init_clocks(int xtal - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - -- s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); -+ s3c24xx_setup_clocks(fclk, hclk, pclk); - - printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); - -+ s3c24xx_setup_clocks(fclk, hclk, pclk); -+} -+ -+void __init s3c2443_init_clocks(int xtal) -+{ -+ struct clk *clkp; -+ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); -+ int ret; -+ int ptr; -+ -+ /* s3c2443 parents h and p clocks from prediv */ -+ clk_h.parent = &clk_prediv; -+ clk_p.parent = &clk_prediv; -+ -+ s3c24xx_register_baseclocks(xtal); -+ s3c2443_setup_clocks(); - s3c2443_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { -@@ -1056,7 +1058,7 @@ void __init s3c2443_init_clocks(int xtal - } - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); -- -+ clk_epll.parent = &clk_epllref; - clk_usb_bus.parent = &clk_usb_bus_host; - - /* ensure usb bus clock is within correct rate of 48MHz */ -@@ -1105,4 +1107,6 @@ void __init s3c2443_init_clocks(int xtal - - (clkp->enable)(clkp, 0); - } -+ -+ s3c_pwmclk_init(); - } -Index: linux-2.6.28/arch/arm/mach-s3c2443/dma.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2443/dma.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2443/dma.c 2009-01-02 00:01:56.000000000 +0100 -@@ -26,12 +26,12 @@ - - #include - #include --#include -+#include - #include - #include - #include - #include --#include -+#include - - #define MAP(x) { \ - [0] = (x) | DMA_CH_VALID, \ -Index: linux-2.6.28/arch/arm/mach-s3c2443/Kconfig -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2443/Kconfig 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2443/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -24,6 +24,7 @@ config MACH_SMDK2443 - bool "SMDK2443" - select CPU_S3C2443 - select MACH_SMDK -+ select S3C_DEV_HSMMC - help - Say Y here if you are using an SMDK2443 - -Index: linux-2.6.28/arch/arm/mach-s3c2443/mach-smdk2443.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2443/mach-smdk2443.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2443/mach-smdk2443.c 2009-01-02 00:01:56.000000000 +0100 -@@ -37,6 +37,7 @@ - - #include - #include -+#include - - #include - #include -@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_u - - static struct platform_device *smdk2443_devices[] __initdata = { - &s3c_device_wdt, -- &s3c_device_i2c, -- &s3c_device_hsmmc, -+ &s3c_device_i2c0, -+ &s3c_device_hsmmc0, - }; - - static void __init smdk2443_map_io(void) -@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void) - - static void __init smdk2443_machine_init(void) - { -+ s3c_i2c0_set_platdata(NULL); - platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); - smdk_machine_init(); - } -Index: linux-2.6.28/arch/arm/mach-s3c2443/s3c2443.c -=================================================================== ---- linux-2.6.28.orig/arch/arm/mach-s3c2443/s3c2443.c 2008-12-25 00:26:37.000000000 +0100 -+++ linux-2.6.28/arch/arm/mach-s3c2443/s3c2443.c 2009-01-02 00:01:56.000000000 +0100 -@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3 - * machine specific initialisation. - */ - --void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size) -+void __init s3c2443_map_io(void) - { - iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); -- iotable_init(mach_desc, mach_size); - } - - /* need to register class before we actually register the device, and -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/debug-macro.S -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/debug-macro.S 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,28 @@ -+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+/* pull in the relevant register and map files. */ -+ -+#include -+#include -+ -+ .macro addruart, rx -+ mrc p15, 0, \rx, c1, c0 -+ tst \rx, #1 -+ ldreq \rx, = S3C24XX_PA_UART -+ ldrne \rx, = S3C24XX_VA_UART -+#if CONFIG_DEBUG_S3C_UART != 0 -+ add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -+#endif -+ .endm -+ -+/* include the reset of the code which will do the work, we're only -+ * compiling for a single cpu processor type so the default of s3c2440 -+ * will be fine with us. -+ */ -+ -+#include -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/io.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/io.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,16 @@ -+/* arch/arm/mach-s3c24a0/include/mach/io.h -+ * -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * -+ * IO access and mapping routines for the S3C24A0 -+ */ -+ -+#ifndef __ASM_ARM_ARCH_IO_H -+#define __ASM_ARM_ARCH_IO_H -+ -+/* No current ISA/PCI bus support. */ -+#define __io(a) ((void __iomem *)(a)) -+#define __mem_pci(a) (a) -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/irqs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/irqs.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,117 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h -+ * -+ * Copyright (c) 2003-2005 Simtec Electronics -+ * Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+ -+#ifndef __ASM_ARCH_24A0_IRQS_H -+#define __ASM_ARCH_24A0_IRQS_H __FILE__ -+ -+#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */ -+/* for generic entry-macro.S */ -+#define IRQ_EINT0 IRQ_EINT0t2 -+ -+#define IRQ_EINT3t6 S3C2410_IRQ(1) -+#define IRQ_EINT7t10 S3C2410_IRQ(2) -+#define IRQ_EINT11t14 S3C2410_IRQ(3) -+#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */ -+#define IRQ_TICK S3C2410_IRQ(5) -+#define IRQ_DCTQ S3C2410_IRQ(6) -+#define IRQ_MC S3C2410_IRQ(7) -+#define IRQ_ME S3C2410_IRQ(8) /* 24 */ -+#define IRQ_KEYPAD S3C2410_IRQ(9) -+#define IRQ_TIMER0 S3C2410_IRQ(10) -+#define IRQ_TIMER1 S3C2410_IRQ(11) -+#define IRQ_TIMER2 S3C2410_IRQ(12) -+#define IRQ_TIMER3_4 S3C2410_IRQ(13) -+#define IRQ_OS_TIMER IRQ_TIMER3_4 -+#define IRQ_LCD S3C2410_IRQ(14) -+#define IRQ_CAM_C S3C2410_IRQ(15) -+#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */ -+#define IRQ_UART0 S3C2410_IRQ(17) -+#define IRQ_CAM_P S3C2410_IRQ(18) -+#define IRQ_MODEM S3C2410_IRQ(19) -+#define IRQ_DMA S3C2410_IRQ(20) -+#define IRQ_SDI S3C2410_IRQ(21) -+#define IRQ_SPI0 S3C2410_IRQ(22) -+#define IRQ_UART1 S3C2410_IRQ(23) -+#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */ -+#define IRQ_USBD S3C2410_IRQ(25) -+#define IRQ_USBH S3C2410_IRQ(26) -+#define IRQ_IIC S3C2410_IRQ(27) -+#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */ -+#define IRQ_VLX_SPI1 S3C2410_IRQ(29) -+#define IRQ_RTC S3C2410_IRQ(30) /* 46 */ -+#define IRQ_ADC_PEN S3C2410_IRQ(31) -+ -+/* interrupts generated from the external interrupts sources */ -+#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */ -+#define IRQ_EINT1 S3C2410_IRQ(33) -+#define IRQ_EINT2 S3C2410_IRQ(34) -+#define IRQ_EINT3 S3C2410_IRQ(35) -+#define IRQ_EINT4 S3C2410_IRQ(36) -+#define IRQ_EINT5 S3C2410_IRQ(37) -+#define IRQ_EINT6 S3C2410_IRQ(38) -+#define IRQ_EINT7 S3C2410_IRQ(39) -+#define IRQ_EINT8 S3C2410_IRQ(40) -+#define IRQ_EINT9 S3C2410_IRQ(41) -+#define IRQ_EINT10 S3C2410_IRQ(42) -+#define IRQ_EINT11 S3C2410_IRQ(43) -+#define IRQ_EINT12 S3C2410_IRQ(44) -+#define IRQ_EINT13 S3C2410_IRQ(45) -+#define IRQ_EINT14 S3C2410_IRQ(46) -+#define IRQ_EINT15 S3C2410_IRQ(47) -+#define IRQ_EINT16 S3C2410_IRQ(48) -+#define IRQ_EINT17 S3C2410_IRQ(49) -+#define IRQ_EINT18 S3C2410_IRQ(50) -+ -+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) -+ -+/* SUB IRQS */ -+#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ -+#define IRQ_S3CUART_TX0 S3C2410_IRQ(52) -+#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53) -+ -+#define IRQ_S3CUART_RX1 S3C2410_IRQ(54) -+#define IRQ_S3CUART_TX1 S3C2410_IRQ(55) -+#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56) -+ -+#define IRQ_S3CUART_RX2 (0x0) -+#define IRQ_S3CUART_TX2 (0x0) -+#define IRQ_S3CUART_ERR2 (0x0) -+ -+ -+#define IRQ_IRDA S3C2410_IRQ(57) -+#define IRQ_MSTICK S3C2410_IRQ(58) -+#define IRQ_RESERVED0 S3C2410_IRQ(59) -+#define IRQ_RESERVED1 S3C2410_IRQ(60) -+#define IRQ_RESERVED2 S3C2410_IRQ(61) -+#define IRQ_TIMER3 S3C2410_IRQ(62) -+#define IRQ_TIMER4 S3C2410_IRQ(63) -+#define IRQ_WDT S3C2410_IRQ(64) -+#define IRQ_BATFLT S3C2410_IRQ(65) -+#define IRQ_POST S3C2410_IRQ(66) -+#define IRQ_DISP_FIFO S3C2410_IRQ(67) -+#define IRQ_PENUP S3C2410_IRQ(68) -+#define IRQ_PENDN S3C2410_IRQ(69) -+#define IRQ_ADC S3C2410_IRQ(70) -+#define IRQ_DISP_FRAME S3C2410_IRQ(71) -+#define IRQ_NFLASH S3C2410_IRQ(72) -+#define IRQ_AC97 S3C2410_IRQ(73) -+#define IRQ_SPI1 S3C2410_IRQ(74) -+#define IRQ_VLX S3C2410_IRQ(75) -+#define IRQ_DMA0 S3C2410_IRQ(76) -+#define IRQ_DMA1 S3C2410_IRQ(77) -+#define IRQ_DMA2 S3C2410_IRQ(78) -+#define IRQ_DMA3 S3C2410_IRQ(79) -+ -+#define IRQ_TC (0x0) -+ -+#define NR_IRQS (IRQ_DMA3+1) -+ -+#endif /* __ASM_ARCH_24A0_IRQS_H */ -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/map.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/map.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,85 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/map.h -+ * -+ * Copyright 2003,2007 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C24A0 - Memory map definitions -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_24A0_MAP_H -+#define __ASM_ARCH_24A0_MAP_H __FILE__ -+ -+#include -+#include -+ -+#define S3C24A0_PA_IO_BASE (0x40000000) -+#define S3C24A0_PA_CLKPWR (0x40000000) -+#define S3C24A0_PA_IRQ (0x40200000) -+#define S3C24A0_PA_DMA (0x40400000) -+#define S3C24A0_PA_MEMCTRL (0x40C00000) -+#define S3C24A0_PA_NAND (0x40C00000) -+#define S3C24A0_PA_SROM (0x40C20000) -+#define S3C24A0_PA_SDRAM (0x40C40000) -+#define S3C24A0_PA_BUSM (0x40CE0000) -+#define S3C24A0_PA_USBHOST (0x41000000) -+#define S3C24A0_PA_MODEMIF (0x41180000) -+#define S3C24A0_PA_IRDA (0x41800000) -+#define S3C24A0_PA_TIMER (0x44000000) -+#define S3C24A0_PA_WATCHDOG (0x44100000) -+#define S3C24A0_PA_RTC (0x44200000) -+#define S3C24A0_PA_UART (0x44400000) -+#define S3C24A0_PA_UART0 (S3C24A0_PA_UART) -+#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000) -+#define S3C24A0_PA_SPI (0x44500000) -+#define S3C24A0_PA_IIC (0x44600000) -+#define S3C24A0_PA_IIS (0x44700000) -+#define S3C24A0_PA_GPIO (0x44800000) -+#define S3C24A0_PA_KEYIF (0x44900000) -+#define S3C24A0_PA_USBDEV (0x44A00000) -+#define S3C24A0_PA_AC97 (0x45000000) -+#define S3C24A0_PA_ADC (0x45800000) -+#define S3C24A0_PA_SDI (0x46000000) -+#define S3C24A0_PA_MS (0x46100000) -+#define S3C24A0_PA_LCD (0x4A000000) -+#define S3C24A0_PA_VPOST (0x4A100000) -+ -+/* physical addresses of all the chip-select areas */ -+ -+#define S3C24A0_CS0 (0x00000000) -+#define S3C24A0_CS1 (0x04000000) -+#define S3C24A0_CS2 (0x08000000) -+#define S3C24A0_CS3 (0x0C000000) -+#define S3C24A0_CS4 (0x10000000) -+#define S3C24A0_CS5 (0x40000000) -+ -+#define S3C24A0_SDRAM_PA (S3C24A0_CS4) -+ -+/* Use a single interface for common resources between S3C24XX cpus */ -+ -+#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ -+#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL -+#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST -+#define S3C24XX_PA_DMA S3C24A0_PA_DMA -+#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR -+#define S3C24XX_PA_LCD S3C24A0_PA_LCD -+#define S3C24XX_PA_UART S3C24A0_PA_UART -+#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER -+#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV -+#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG -+#define S3C24XX_PA_IIS S3C24A0_PA_IIS -+#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO -+#define S3C24XX_PA_RTC S3C24A0_PA_RTC -+#define S3C24XX_PA_ADC S3C24A0_PA_ADC -+#define S3C24XX_PA_SPI S3C24A0_PA_SPI -+#define S3C24XX_PA_SDI S3C24A0_PA_SDI -+#define S3C24XX_PA_NAND S3C24A0_PA_NAND -+ -+#define S3C_PA_UART S3C24A0_PA_UART -+#define S3C_PA_IIC S3C24A0_PA_IIC -+ -+#endif /* __ASM_ARCH_24A0_MAP_H */ -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/memory.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/memory.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,19 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h -+ * from linux/include/asm-arm/arch-rpc/memory.h -+ * -+ * Copyright (C) 1996,1997,1998 Russell King. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_24A0_MEMORY_H -+#define __ASM_ARCH_24A0_MEMORY_H __FILE__ -+ -+#define PHYS_OFFSET UL(0x10000000) -+ -+#define __virt_to_bus(x) __virt_to_phys(x) -+#define __bus_to_virt(x) __phys_to_virt(x) -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-clock.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,88 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h -+ * -+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * S3C24A0 clock register definitions -+*/ -+ -+#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H -+#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__ -+ -+#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10) -+#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14) -+#define S3C24A0_CLKCON S3C2410_CLKREG(0x20) -+#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24) -+#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28) -+ -+/* CLKCON register bits */ -+ -+#define S3C24A0_CLKCON_VLX (1<<29) -+#define S3C24A0_CLKCON_VPOST (1<<28) -+#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */ -+#define S3C24A0_CLKCON_MPEGDCTQ (1<<26) -+#define S3C24A0_CLKCON_VPOSTIF (1<<25) -+#define S3C24A0_CLKCON_MPEG4IF (1<<24) -+#define S3C24A0_CLKCON_CAM_UPLL (1<<23) -+#define S3C24A0_CLKCON_LCDC (1<<22) -+#define S3C24A0_CLKCON_CAM_HCLK (1<<21) -+#define S3C24A0_CLKCON_MPEG4 (1<<20) -+#define S3C24A0_CLKCON_KEYPAD (1<<19) -+#define S3C24A0_CLKCON_ADC (1<<18) -+#define S3C24A0_CLKCON_SDI (1<<17) -+#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */ -+#define S3C24A0_CLKCON_USBD (1<<15) -+#define S3C24A0_CLKCON_GPIO (1<<14) -+#define S3C24A0_CLKCON_IIS (1<<13) -+#define S3C24A0_CLKCON_IIC (1<<12) -+#define S3C24A0_CLKCON_SPI (1<<11) -+#define S3C24A0_CLKCON_UART1 (1<<10) -+#define S3C24A0_CLKCON_UART0 (1<<9) -+#define S3C24A0_CLKCON_PWMT (1<<8) -+#define S3C24A0_CLKCON_USBH (1<<7) -+#define S3C24A0_CLKCON_AC97 (1<<6) -+#define S3C24A0_CLKCON_IrDA (1<<4) -+#define S3C24A0_CLKCON_IDLE (1<<2) -+#define S3C24A0_CLKCON_MON (1<<1) -+#define S3C24A0_CLKCON_STOP (1<<0) -+ -+/* CLKSRC register bits */ -+ -+#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */ -+#define S3C24A0_CLKSRC_UPLL (1<<7) -+#define S3C24A0_CLKSRC_MPLL (1<<5) -+#define S3C24A0_CLKSRC_EXT (1<<4) -+ -+/* Use a single interface with the common code, for s3c24xx */ -+ -+#define S3C2410_MPLLCON S3C24A0_MPLLCON -+#define S3C2410_UPLLCON S3C24A0_UPLLCON -+#define S3C2410_CLKCON S3C24A0_CLKCON -+#define S3C2410_CLKSLOW S3C24A0_CLKSRC -+#define S3C2410_CLKDIVN S3C24A0_CLKDIVN -+ -+#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE -+#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP -+#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC -+#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH -+#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD -+#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT -+#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI -+#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0 -+#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1 -+#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO -+#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC -+#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC -+#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS -+#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI -+ -+#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL -+#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL -+#define S3C2410_CLKSLOW_SLOW (0xFF) -+#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1) -+ -+#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */ -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-irq.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/regs-irq.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,25 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h -+ * -+ * Copyright (c) 2003 Simtec Electronics -+ * http://www.simtec.co.uk/products/SWLINUX/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+ -+#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H -+#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__ -+ -+ -+#define S3C2410_EINTMASK S3C2410_EINTREG(0x034) -+#define S3C2410_EINTPEND S3C2410_EINTREG(0X038) -+ -+#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034) -+#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038) -+ -+#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */ -+ -+ -+ -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/system.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/system.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,25 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/system.h -+ * -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * -+ * S3C24A0 - System function defines and includes -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#include -+#include -+ -+#include -+ -+static void arch_idle(void) -+{ -+ /* currently no specific idle support. */ -+} -+ -+void (*s3c24xx_reset_hook)(void); -+ -+#include -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/tick.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/tick.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,15 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h -+ * -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C24A0 - timer tick support -+ */ -+ -+#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0)) -+ -+static inline int s3c24xx_ostimer_pending(void) -+{ -+ return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4; -+} -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/timex.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/timex.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,18 @@ -+/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h -+ * -+ * Copyright (c) 2008 Simtec Electronics -+ * Ben Dooks -+ * -+ * S3C2410 - time parameters -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_TIMEX_H -+#define __ASM_ARCH_TIMEX_H -+ -+#define CLOCK_TICK_RATE 12000000 -+ -+#endif /* __ASM_ARCH_TIMEX_H */ -Index: linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/vmalloc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c24a0/include/mach/vmalloc.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,17 @@ -+/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h -+ * -+ * Copyright 2008 Simtec Electronics -+ -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * S3C24A0 vmalloc definition -+*/ -+ -+#ifndef __ASM_ARCH_VMALLOC_H -+#define __ASM_ARCH_VMALLOC_H -+ -+#define VMALLOC_END (0xE0000000) -+ -+#endif /* __ASM_ARCH_VMALLOC_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/debug-macro.S -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/debug-macro.S 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,39 @@ -+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+/* pull in the relevant register and map files. */ -+ -+#include -+#include -+ -+ /* note, for the boot process to work we have to keep the UART -+ * virtual address aligned to an 1MiB boundary for the L1 -+ * mapping the head code makes. We keep the UART virtual address -+ * aligned and add in the offset when we load the value here. -+ */ -+ -+ .macro addruart, rx -+ mrc p15, 0, \rx, c1, c0 -+ tst \rx, #1 -+ ldreq \rx, = S3C_PA_UART -+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) -+#if CONFIG_DEBUG_S3C_UART != 0 -+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) -+#endif -+ .endm -+ -+/* include the reset of the code which will do the work, we're only -+ * compiling for a single cpu processor type so the default of s3c2440 -+ * will be fine with us. -+ */ -+ -+#include -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/dma.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/dma.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,16 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C6400 - DMA support -+ */ -+ -+#ifndef __ASM_ARCH_DMA_H -+#define __ASM_ARCH_DMA_H __FILE__ -+ -+/* currently nothing here, placeholder */ -+ -+#endif /* __ASM_ARCH_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/entry-macro.S -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/entry-macro.S 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * Low-level IRQ helper macros for the Samsung S3C64XX series -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+*/ -+ -+#include -+#include -+#include -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_preamble, base, tmp -+ ldr \base, =S3C_VA_VIC0 -+ .endm -+ -+ .macro arch_ret_to_user, tmp1, tmp2 -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ -+ @ check the vic0 -+ mov \irqnr, # S3C_IRQ_OFFSET + 31 -+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] -+ teq \irqstat, #0 -+ -+ @ otherwise try vic1 -+ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) -+ addeq \irqnr, \irqnr, #32 -+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] -+ teqeq \irqstat, #0 -+ -+ clzne \irqstat, \irqstat -+ subne \irqnr, \irqnr, \irqstat -+ .endm -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio-core.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio-core.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,21 @@ -+/* arch/arm/mach-s3c6400/include/mach/gpio-core.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C64XX - GPIO core support -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_GPIO_CORE_H -+#define __ASM_ARCH_GPIO_CORE_H __FILE__ -+ -+/* currently we just include the platform support */ -+#include -+ -+#endif /* __ASM_ARCH_GPIO_CORE_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/gpio.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,96 @@ -+/* arch/arm/mach-s3c6400/include/mach/gpio.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C6400 - GPIO lib support -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#define gpio_get_value __gpio_get_value -+#define gpio_set_value __gpio_set_value -+#define gpio_cansleep __gpio_cansleep -+#define gpio_to_irq __gpio_to_irq -+ -+/* GPIO bank sizes */ -+#define S3C64XX_GPIO_A_NR (8) -+#define S3C64XX_GPIO_B_NR (7) -+#define S3C64XX_GPIO_C_NR (8) -+#define S3C64XX_GPIO_D_NR (5) -+#define S3C64XX_GPIO_E_NR (5) -+#define S3C64XX_GPIO_F_NR (16) -+#define S3C64XX_GPIO_G_NR (7) -+#define S3C64XX_GPIO_H_NR (10) -+#define S3C64XX_GPIO_I_NR (16) -+#define S3C64XX_GPIO_J_NR (12) -+#define S3C64XX_GPIO_K_NR (16) -+#define S3C64XX_GPIO_L_NR (15) -+#define S3C64XX_GPIO_M_NR (6) -+#define S3C64XX_GPIO_N_NR (16) -+#define S3C64XX_GPIO_O_NR (16) -+#define S3C64XX_GPIO_P_NR (15) -+#define S3C64XX_GPIO_Q_NR (9) -+ -+/* GPIO bank numbes */ -+ -+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra -+ * space for debugging purposes so that any accidental -+ * change from one gpio bank to another can be caught. -+*/ -+ -+#define S3C64XX_GPIO_NEXT(__gpio) \ -+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) -+ -+enum s3c_gpio_number { -+ S3C64XX_GPIO_A_START = 0, -+ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A), -+ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B), -+ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C), -+ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D), -+ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E), -+ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F), -+ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G), -+ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H), -+ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I), -+ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J), -+ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K), -+ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L), -+ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M), -+ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N), -+ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O), -+ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P), -+}; -+ -+/* S3C64XX GPIO number definitions. */ -+ -+#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr)) -+#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr)) -+#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr)) -+#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr)) -+#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr)) -+#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr)) -+#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr)) -+#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr)) -+#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr)) -+#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr)) -+#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr)) -+#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr)) -+#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr)) -+#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr)) -+#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr)) -+#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr)) -+#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr)) -+ -+/* the end of the S3C64XX specific gpios */ -+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -+#define S3C_GPIO_END S3C64XX_GPIO_END -+ -+/* define the number of gpios we need to the one after the GPQ() range */ -+#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -+ -+#include -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/hardware.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/hardware.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,16 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C6400 - Hardware support -+ */ -+ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H __FILE__ -+ -+/* currently nothing here, placeholder */ -+ -+#endif /* __ASM_ARCH_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/irqs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/irqs.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,20 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C6400 - IRQ definitions -+ */ -+ -+#ifndef __ASM_ARCH_IRQS_H -+#define __ASM_ARCH_IRQS_H __FILE__ -+ -+#ifndef __ASM_ARM_IRQ_H -+#error "Do not include this directly, instead #include " -+#endif -+ -+#include -+ -+#endif /* __ASM_ARCH_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/map.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/map.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,71 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/map.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C64XX - Memory map definitions -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_MAP_H -+#define __ASM_ARCH_MAP_H __FILE__ -+ -+#include -+ -+/* HSMMC units */ -+#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) -+#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) -+#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1) -+#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2) -+ -+#define S3C_PA_UART (0x7F005000) -+#define S3C_PA_UART0 (S3C_PA_UART + 0x00) -+#define S3C_PA_UART1 (S3C_PA_UART + 0x400) -+#define S3C_PA_UART2 (S3C_PA_UART + 0x800) -+#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) -+#define S3C_UART_OFFSET (0x400) -+ -+/* See notes on UART VA mapping in debug-macro.S */ -+#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) -+ -+#define S3C_VA_UART0 S3C_VA_UARTx(0) -+#define S3C_VA_UART1 S3C_VA_UARTx(1) -+#define S3C_VA_UART2 S3C_VA_UARTx(2) -+#define S3C_VA_UART3 S3C_VA_UARTx(3) -+ -+#define S3C64XX_PA_FB (0x77100000) -+#define S3C64XX_PA_SYSCON (0x7E00F000) -+#define S3C64XX_PA_TIMER (0x7F006000) -+#define S3C64XX_PA_IIC0 (0x7F004000) -+#define S3C64XX_PA_IIC1 (0x7F00F000) -+ -+#define S3C64XX_PA_GPIO (0x7F008000) -+#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000) -+#define S3C64XX_SZ_GPIO SZ_4K -+ -+#define S3C64XX_PA_SDRAM (0x50000000) -+#define S3C64XX_PA_VIC0 (0x71200000) -+#define S3C64XX_PA_VIC1 (0x71300000) -+ -+#define S3C64XX_PA_MODEM (0x74108000) -+#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000) -+ -+/* place VICs close together */ -+#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) -+#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) -+ -+/* compatibiltiy defines. */ -+#define S3C_PA_TIMER S3C64XX_PA_TIMER -+#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 -+#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 -+#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 -+#define S3C_PA_IIC S3C64XX_PA_IIC0 -+#define S3C_PA_IIC1 S3C64XX_PA_IIC1 -+#define S3C_PA_FB S3C64XX_PA_FB -+ -+#endif /* __ASM_ARCH_6400_MAP_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/memory.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/memory.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,21 @@ -+/* arch/arm/mach-s3c6400/include/mach/memory.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_MEMORY_H -+#define __ASM_ARCH_MEMORY_H -+ -+#define PHYS_OFFSET UL(0x50000000) -+ -+#define __virt_to_bus(x) __virt_to_phys(x) -+#define __bus_to_virt(x) __phys_to_virt(x) -+ -+#endif -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/pwm-clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/pwm-clock.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,56 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C64xx - pwm clock and timer support -+ */ -+ -+/** -+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk -+ * @tcfg: The timer TCFG1 register bits shifted down to 0. -+ * -+ * Return true if the given configuration from TCFG1 is a TCLK instead -+ * any of the TDIV clocks. -+ */ -+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -+{ -+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -+} -+ -+/** -+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor -+ * @tcfg1: The tcfg1 setting, shifted down. -+ * -+ * Get the divisor value for the given tcfg1 setting. We assume the -+ * caller has already checked to see if this is not a TCLK source. -+ */ -+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -+{ -+ return 1 << tcfg1; -+} -+ -+/** -+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1 -+ * -+ * Return true if we have a /1 in the tdiv setting. -+ */ -+static inline unsigned int pwm_tdiv_has_div1(void) -+{ -+ return 1; -+} -+ -+/** -+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. -+ * @div: The divisor to calculate the bit information for. -+ * -+ * Turn a divisor into the necessary bit field for TCFG1. -+ */ -+static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -+{ -+ return ilog2(div); -+} -+ -+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-clock.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,16 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C64XX - clock register compatibility with s3c24xx -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#include -+ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-fb.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-fb.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,259 @@ -+/* arch/arm/mach-s3c6400/include/mach/regs-fb.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C64XX - new-style framebuffer register definitions -+ * -+ * This is the register set for the new style framebuffer interface -+ * found from the S3C2443 onwards and specifically the S3C64XX series -+ * S3C6400 and S3C6410. -+ * -+ * The file contains the cpu specific items which change between whichever -+ * architecture is selected. See for the core definitions -+ * that are the same. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+/* include the core definitions here, in case we really do need to -+ * override them at a later date. -+*/ -+ -+#include -+ -+#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ -+#define VIDCON1_FSTATUS_EVEN (1 << 15) -+ -+/* Video timing controls */ -+#define VIDTCON0 (0x10) -+#define VIDTCON1 (0x14) -+#define VIDTCON2 (0x18) -+ -+/* Window position controls */ -+ -+#define WINCON(_win) (0x20 + ((_win) * 4)) -+ -+/* OSD1 and OSD4 do not have register D */ -+ -+#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) -+#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) -+#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) -+#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) -+ -+/* Video buffer addresses */ -+ -+#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) -+#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) -+#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) -+#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) -+#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) -+ -+#define VIDINTCON0 (0x130) -+ -+#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) -+ -+/* WINCONx */ -+ -+#define WINCONx_CSCWIDTH_MASK (0x3 << 26) -+#define WINCONx_CSCWIDTH_SHIFT (26) -+#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) -+#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) -+ -+#define WINCONx_ENLOCAL (1 << 22) -+#define WINCONx_BUFSTATUS (1 << 21) -+#define WINCONx_BUFSEL (1 << 20) -+#define WINCONx_BUFAUTOEN (1 << 19) -+#define WINCONx_YCbCr (1 << 13) -+ -+#define WINCON1_LOCALSEL_CAMIF (1 << 23) -+ -+#define WINCON2_LOCALSEL_CAMIF (1 << 23) -+#define WINCON2_BLD_PIX (1 << 6) -+ -+#define WINCON2_ALPHA_SEL (1 << 1) -+#define WINCON2_BPPMODE_MASK (0xf << 2) -+#define WINCON2_BPPMODE_SHIFT (2) -+#define WINCON2_BPPMODE_1BPP (0x0 << 2) -+#define WINCON2_BPPMODE_2BPP (0x1 << 2) -+#define WINCON2_BPPMODE_4BPP (0x2 << 2) -+#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) -+#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) -+#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) -+#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) -+#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) -+#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) -+#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) -+#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) -+#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) -+#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) -+#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) -+ -+#define WINCON3_BLD_PIX (1 << 6) -+ -+#define WINCON3_ALPHA_SEL (1 << 1) -+#define WINCON3_BPPMODE_MASK (0xf << 2) -+#define WINCON3_BPPMODE_SHIFT (2) -+#define WINCON3_BPPMODE_1BPP (0x0 << 2) -+#define WINCON3_BPPMODE_2BPP (0x1 << 2) -+#define WINCON3_BPPMODE_4BPP (0x2 << 2) -+#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) -+#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) -+#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) -+#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) -+#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) -+#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) -+#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) -+#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) -+#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) -+#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) -+ -+#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) -+#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) -+#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) -+ -+#define DITHMODE (0x170) -+#define WINxMAP(_win) (0x180 + ((_win) * 4)) -+ -+ -+#define DITHMODE_R_POS_MASK (0x3 << 5) -+#define DITHMODE_R_POS_SHIFT (5) -+#define DITHMODE_R_POS_8BIT (0x0 << 5) -+#define DITHMODE_R_POS_6BIT (0x1 << 5) -+#define DITHMODE_R_POS_5BIT (0x2 << 5) -+ -+#define DITHMODE_G_POS_MASK (0x3 << 3) -+#define DITHMODE_G_POS_SHIFT (3) -+#define DITHMODE_G_POS_8BIT (0x0 << 3) -+#define DITHMODE_G_POS_6BIT (0x1 << 3) -+#define DITHMODE_G_POS_5BIT (0x2 << 3) -+ -+#define DITHMODE_B_POS_MASK (0x3 << 1) -+#define DITHMODE_B_POS_SHIFT (1) -+#define DITHMODE_B_POS_8BIT (0x0 << 1) -+#define DITHMODE_B_POS_6BIT (0x1 << 1) -+#define DITHMODE_B_POS_5BIT (0x2 << 1) -+ -+#define DITHMODE_DITH_EN (1 << 0) -+ -+#define WPALCON (0x1A0) -+ -+#define WPALCON_W4PAL_16BPP_A555 (1 << 8) -+#define WPALCON_W3PAL_16BPP_A555 (1 << 7) -+#define WPALCON_W2PAL_16BPP_A555 (1 << 6) -+ -+/* Palette registers */ -+ -+#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2)) -+#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2)) -+#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2)) -+#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4)) -+#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4)) -+ -+/* system specific implementation code for palette sizes, and other -+ * information that changes depending on which architecture is being -+ * compiled. -+*/ -+ -+/* return true if window _win has OSD register D */ -+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) -+ -+static inline unsigned int s3c_fb_win_pal_size(unsigned int win) -+{ -+ if (win < 2) -+ return 256; -+ if (win < 4) -+ return 16; -+ if (win == 4) -+ return 4; -+ -+ BUG(); /* shouldn't get here */ -+} -+ -+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) -+{ -+ /* all windows can do 1/2 bpp */ -+ -+ if ((bpp == 25 || bpp == 19) && win == 0) -+ return 0; /* win 0 does not have 19 or 25bpp modes */ -+ -+ if (bpp == 4 && win == 4) -+ return 0; -+ -+ if (bpp == 8 && (win >= 3)) -+ return 0; /* win 3/4 cannot do 8bpp in any mode */ -+ -+ return 1; -+} -+ -+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) -+{ -+ switch (window) { -+ case 0: return WIN0_PAL(reg); -+ case 1: return WIN1_PAL(reg); -+ case 2: return WIN2_PAL(reg); -+ case 3: return WIN3_PAL(reg); -+ case 4: return WIN4_PAL(reg); -+ } -+ -+ BUG(); -+} -+ -+static inline int s3c_fb_pal_is16(unsigned int window) -+{ -+ return window > 1; -+} -+ -+struct s3c_fb_palette { -+ struct fb_bitfield r; -+ struct fb_bitfield g; -+ struct fb_bitfield b; -+ struct fb_bitfield a; -+}; -+ -+static inline void s3c_fb_init_palette(unsigned int window, -+ struct s3c_fb_palette *palette) -+{ -+ if (window < 2) { -+ /* Windows 0/1 are 8/8/8 or A/8/8/8 */ -+ palette->r.offset = 16; -+ palette->r.length = 8; -+ palette->g.offset = 8; -+ palette->g.length = 8; -+ palette->b.offset = 0; -+ palette->b.length = 8; -+ } else { -+ /* currently we assume RGB 5/6/5 */ -+ palette->r.offset = 11; -+ palette->r.length = 5; -+ palette->g.offset = 5; -+ palette->g.length = 6; -+ palette->b.offset = 0; -+ palette->b.length = 5; -+ } -+} -+ -+/* Notes on per-window bpp settings -+ * -+ * Value Win0 Win1 Win2 Win3 Win 4 -+ * 0000 1(P) 1(P) 1(P) 1(P) 1(P) -+ * 0001 2(P) 2(P) 2(P) 2(P) 2(P) -+ * 0010 4(P) 4(P) 4(P) 4(P) -none- -+ * 0011 8(P) 8(P) -none- -none- -none- -+ * 0100 -none- 8(A232) 8(A232) -none- -none- -+ * 0101 16(565) 16(565) 16(565) 16(565) 16(565) -+ * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) -+ * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) -+ * 1000 18(666) 18(666) 18(666) 18(666) 18(666) -+ * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) -+ * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) -+ * 1011 24(888) 24(888) 24(888) 24(888) 24(888) -+ * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) -+ * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) -+ * 1110 -none- -none- -none- -none- -none- -+ * 1111 -none- -none- -none- -none- -none- -+*/ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-irq.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/regs-irq.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,20 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C64XX - IRQ register definitions -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_REGS_IRQ_H -+#define __ASM_ARCH_REGS_IRQ_H __FILE__ -+ -+#include -+ -+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/system.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/system.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,44 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/system.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * S3C6400 - system implementation -+ */ -+ -+#ifndef __ASM_ARCH_SYSTEM_H -+#define __ASM_ARCH_SYSTEM_H __FILE__ -+ -+#include -+#include -+ -+#include -+#include -+ -+static void arch_idle(void) -+{ -+ unsigned long flags; -+ u32 mode; -+ -+ /* ensure that if we execute the cpu idle sequence that we -+ * go into idle mode instead of powering off. */ -+ -+ local_irq_save(flags); -+ mode = __raw_readl(S3C64XX_PWR_CFG); -+ mode &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; -+ mode |= S3C64XX_PWRCFG_CFG_WFI_IDLE; -+ __raw_writel(mode, S3C64XX_PWR_CFG); -+ -+ local_irq_restore(flags); -+ -+ cpu_do_idle(); -+} -+ -+static void arch_reset(char mode) -+{ -+ /* nothing here yet */ -+} -+ -+#endif /* __ASM_ARCH_IRQ_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/tick.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/tick.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,29 @@ -+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C64XX - Timer tick support definitions -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_TICK_H -+#define __ASM_ARCH_TICK_H __FILE__ -+ -+/* note, the timer interrutps turn up in 2 places, the vic and then -+ * the timer block. We take the VIC as the base at the moment. -+ */ -+static inline u32 s3c24xx_ostimer_pending(void) -+{ -+ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); -+ return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -+} -+ -+#define TICK_MAX (0xffffffff) -+ -+#endif /* __ASM_ARCH_6400_TICK_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/include/mach/uncompress.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/include/mach/uncompress.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,28 @@ -+/* arch/arm/mach-s3c6400/include/mach/uncompress.h -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * http://armlinux.simtec.co.uk/ -+ * Ben Dooks -+ * -+ * S3C6400 - uncompress code -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#ifndef __ASM_ARCH_UNCOMPRESS_H -+#define __ASM_ARCH_UNCOMPRESS_H -+ -+#include -+#include -+ -+static void arch_detect_cpu(void) -+{ -+ /* we do not need to do any cpu detection here at the moment. */ -+ fifo_mask = S3C2440_UFSTAT_TXMASK; -+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; -+} -+ -+#endif /* __ASM_ARCH_UNCOMPRESS_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6400/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,8 @@ -+# arch/arm/mach-s3c6400/Kconfig -+# -+# Copyright 2008 Openmoko, Inc. -+# Simtec Electronics, Ben Dooks -+# -+# Licensed under GPLv2 -+ -+# Currently nothing here, this will be added later -Index: linux-2.6.28/arch/arm/mach-s3c6400/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/Makefile 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,15 @@ -+# arch/arm/mach-s3c6400/Makefile -+# -+# Copyright 2008 Openmoko, Inc. -+# Copyright 2008 Simtec Electronics -+# -+# Licensed under GPLv2 -+ -+obj-y := -+obj-m := -+obj-n := -+obj- := -+ -+# Core support for S3C6400 system -+ -+obj-n += blank.o -Index: linux-2.6.28/arch/arm/mach-s3c6400/Makefile.boot -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6400/Makefile.boot 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,2 @@ -+ zreladdr-y := 0x50008000 -+params_phys-y := 0x50000100 -Index: linux-2.6.28/arch/arm/mach-s3c6410/cpu.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6410/cpu.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,101 @@ -+/* linux/arch/arm/mach-s3c6410/cpu.c -+ * -+ * Copyright 2008 Simtec Electronics -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Initial IO mappings */ -+ -+static struct map_desc s3c6410_iodesc[] __initdata = { -+}; -+ -+/* s3c6410_map_io -+ * -+ * register the standard cpu IO areas -+*/ -+ -+void __init s3c6410_map_io(void) -+{ -+ iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc)); -+ -+ /* initialise device information early */ -+ s3c6410_default_sdhci0(); -+ s3c6410_default_sdhci1(); -+ -+ /* the i2c devices are directly compatible with s3c2440 */ -+ s3c_i2c0_setname("s3c2440-i2c"); -+ s3c_i2c1_setname("s3c2440-i2c"); -+} -+ -+void __init s3c6410_init_clocks(int xtal) -+{ -+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__); -+ s3c24xx_register_baseclocks(xtal); -+ s3c64xx_register_clocks(); -+ s3c6400_register_clocks(); -+ s3c6400_setup_clocks(); -+} -+ -+void __init s3c6410_init_irq(void) -+{ -+ /* VIC0 is missing IRQ7, VIC1 is fully populated. */ -+ s3c64xx_init_irq(~0 & ~(1 << 7), ~0); -+} -+ -+struct sysdev_class s3c6410_sysclass = { -+ .name = "s3c6410-core", -+}; -+ -+static struct sys_device s3c6410_sysdev = { -+ .cls = &s3c6410_sysclass, -+}; -+ -+static int __init s3c6410_core_init(void) -+{ -+ return sysdev_class_register(&s3c6410_sysclass); -+} -+ -+core_initcall(s3c6410_core_init); -+ -+int __init s3c6410_init(void) -+{ -+ printk("S3C6410: Initialising architecture\n"); -+ -+ return sysdev_register(&s3c6410_sysdev); -+} -Index: linux-2.6.28/arch/arm/mach-s3c6410/include/mach/om-gta03.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6410/include/mach/om-gta03.h 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,91 @@ -+/* -+ * GTA03 GPIO Mappings -+ * -+ * (C) 2008 by Openmoko Inc. -+ * Author: Andy Green -+ * All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation -+ * -+ */ -+ -+#ifndef _OM_GTA03_H -+#define _OM_GTA03_H -+ -+#include -+#include -+#include -+ -+extern struct pcf50633_platform_data om_gta03_pcf_pdata; -+ -+/* ATAG_REVISION from bootloader */ -+#define GTA03v1_SYSTEM_REV 0x00000001 -+ -+#define GTA03_GPIO_VIBRATOR_ON S3C64XX_GPF(13) -+#define GTA03_GPIO_CLKOUT S3C64XX_GPF(14) -+ -+#define GTA03_GPIO_ACCEL_MISO S3C64XX_GPC(0) -+#define GTA03_GPIO_ACCEL_CLK S3C64XX_GPC(1) -+#define GTA03_GPIO_ACCEL_MOSI S3C64XX_GPC(2) -+ -+#define GTA03_GPIO_LCM_MISO S3C64XX_GPC(4) -+#define GTA03_GPIO_LCM_CLK S3C64XX_GPC(5) -+#define GTA03_GPIO_LCM_MOSI S3C64XX_GPC(6) -+#define GTA03_GPIO_LCM_CS S3C64XX_GPC(7) -+ -+#define GTA03_GPIO_BTPCM_SHARED_SCLK S3C64XX_GPE(0) -+#define GTA03_GPIO_BTPCM_SHARED_EXTCLK S3C64XX_GPE(1) -+#define GTA03_GPIO_BTPCM_SHARED_FSYNC S3C64XX_GPE(2) -+#define GTA03_GPIO_BTPCM_SHARED_SIN S3C64XX_GPE(3) -+#define GTA03_GPIO_BTPCM_SHARED_SOUT S3C64XX_GPE(4) -+ -+#define GTA03_GPIO_WLAN_RESET S3C64XX_GPH(6) -+#define GTA03_GPIO_HDQ S3C64XX_GPH(7) -+#define GTA03_GPIO_WLAN_PWRDN S3C64XX_GPH(8) -+ -+#define GTA03_GPIO_VERSION2 S3C64XX_GPI(0) -+#define GTA03_GPIO_VERSION1 S3C64XX_GPI(1) -+#define GTA03_GPIO_VERSION0 S3C64XX_GPI(8) -+ -+#define GTA03_GPIO_NWLAN_POWER S3C64XX_GPK(0) -+#define GTA03_GPIO_MODEN_ON S3C64XX_GPK(2) -+ -+#define GTA03_GPIO_TP_RESET S3C64XX_GPM(0) -+#define GTA03_GPIO_GPS_LNA_EN S3C64XX_GPM(2) -+ -+#define GTA03_GPIO_USB_FLT S3C64XX_GPM(4) -+#define GTA03_GPIO_USB_OC S3C64XX_GPM(5) -+ -+#define GTA03_GPIO_ACCEL_INT1 S3C64XX_GPN(0) -+#define GTA03_GPIO_KEY_MINUS S3C64XX_GPN(1) -+#define GTA03_GPIO_KEY_PLUS S3C64XX_GPN(2) -+#define GTA03_GPIO_PWR_IND S3C64XX_GPN(3) -+#define GTA03_GPIO_PWR_IRQ S3C64XX_GPN(4) -+#define GTA03_GPIO_TOUCH S3C64XX_GPN(5) -+#define GTA03_GPIO_JACK_INSERT S3C64XX_GPN(6) -+#define GTA03_GPIO_GPS_INT S3C64XX_GPN(7) -+#define GTA03_GPIO_HOLD S3C64XX_GPN(8) -+#define GTA03_GPIO_WLAN_WAKEUP S3C64XX_GPN(9) -+#define GTA03_GPIO_ACCEL_INT2 S3C64XX_GPN(10) -+#define GTA03_GPIO_IO1 S3C64XX_GPN(11) -+#define GTA03_GPIO_NONKEYWAKE S3C64XX_GPN(12) -+ -+#define GTA03_GPIO_N_MODEM_RESET S3C64XX_GPO(1) -+ -+#define GTA03_IRQ_GSENSOR_1 S3C_EINT(0) -+#define GTA03_IRQ_KEY_MINUS S3C_EINT(1) -+#define GTA03_IRQ_KEY_PLUS S3C_EINT(2) -+#define GTA03_IRQ_PWR_IND S3C_EINT(3) -+#define GTA03_IRQ_PMU S3C_EINT(4) -+#define GTA03_IRQ_TOUCH S3C_EINT(5) -+#define GTA03_IRQ_JACK_INSERT S3C_EINT(6) -+#define GTA03_IRQ_GPS_INT S3C_EINT(7) -+#define GTA03_IRQ_NHOLD S3C_EINT(8) -+#define GTA03_IRQ_WLAN_WAKEUP S3C_EINT(9) -+#define GTA03_IRQ_GSENSOR_2 S3C_EINT(10) -+#define GTA03_IRQ_IO1 S3C_EINT(11) -+#define GTA03_IRQ_NONKEYWAKE S3C_EINT(12) -+ -+#endif /* _OM_GTA03_H */ -Index: linux-2.6.28/arch/arm/mach-s3c6410/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6410/Kconfig 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,80 @@ -+# arch/arm/mach-s3c6410/Kconfig -+# -+# Copyright 2008 Openmoko, Inc. -+# Copyright 2008 Simtec Electronics -+# -+# Licensed under GPLv2 -+ -+# Configuration options for the S3C6410 CPU -+ -+config CPU_S3C6410 -+ bool -+ select CPU_S3C6400_INIT -+ select CPU_S3C6400_CLOCK -+ help -+ Enable S3C6410 CPU support -+ -+config S3C6410_SETUP_SDHCI -+ bool -+ help -+ Internal helper functions for S3C6410 based SDHCI systems -+ -+config MACH_SMDK6410 -+ bool "SMDK6410" -+ select CPU_S3C6410 -+ select S3C_DEV_HSMMC -+ select S3C_DEV_HSMMC1 -+ select S3C_DEV_I2C1 -+ select S3C_DEV_FB -+ select S3C6410_SETUP_SDHCI -+ select S3C64XX_SETUP_I2C1 -+ select S3C64XX_SETUP_FB_24BPP -+ help -+ Machine support for the Samsung SMDK6410 -+ -+# At least some of the SMDK6410s were shipped with the card detect -+# for the MMC/SD slots connected to the same input. This means that -+# either the boards need to be altered to have channel0 to an alternate -+# configuration or that only one slot can be used. -+ -+choice -+ prompt "SMDK6410 MMC/SD slot setup" -+ depends on MACH_SMDK6410 -+ -+config SMDK6410_SD_CH0 -+ bool "Use channel 0 only" -+ depends on MACH_SMDK6410 -+ help -+ Select CON7 (channel 0) as the MMC/SD slot, as -+ at least some SMDK6410 boards come with the -+ resistors fitted so that the card detects for -+ channels 0 and 1 are the same. -+ -+config SMDK6410_SD_CH1 -+ bool "Use channel 1 only" -+ depends on MACH_SMDK6410 -+ help -+ Select CON6 (channel 1) as the MMC/SD slot, as -+ at least some SMDK6410 boards come with the -+ resistors fitted so that the card detects for -+ channels 0 and 1 are the same. -+ -+endchoice -+ -+config MACH_OPENMOKO_GTA03 -+ bool "Openmoko GTA03 Phone" -+ select CPU_S3C6410 -+ select S3C_DEV_HSMMC -+ select S3C_DEV_HSMMC1 -+ select S3C_DEV_I2C1 -+ select S3C6410_SETUP_SDHCI -+ select S3C64XX_SETUP_I2C1 -+ select S3C_DEV_FB -+ select S3C64XX_SETUP_FB_24BPP -+# select SENSORS_PCF50633 -+ select POWER_SUPPLY -+# select GTA02_HDQ -+ select MACH_NEO1973 -+ help -+ Machine support for the Openmoko GTA03 Phone -+ -Index: linux-2.6.28/arch/arm/mach-s3c6410/mach-om-gta03.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28/arch/arm/mach-s3c6410/mach-om-gta03.c 2009-01-02 00:01:56.000000000 +0100 -@@ -0,0 +1,654 @@ -+/* linux/arch/arm/mach-s3c6410/mach-om_gta03.c -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Andy Green -+ * -+ * based on mach_om_gta03.c which is -+ * -+ * Copyright 2008 Openmoko, Inc. -+ * Copyright 2008 Simtec Electronics -+ * Ben Dooks -+ * http://armlinux.simtec.co.uk/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include