From: Andy Lee Date: Sun, 23 May 2021 13:02:19 +0000 (+0700) Subject: ath79: add support for TP-Link TL-WR841HP v3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c5235f6b2441a6b531622b76b66c354896c0dae0;p=openwrt%2Fstaging%2Frmilecki.git ath79: add support for TP-Link TL-WR841HP v3 Specifications: - QCA9533 SoC, 8 MB nor flash, 64 MB DDR2 RAM - 2x2 9dBi antenna, wifi 2.4Ghz 300Mbps - 4x Ethernet LAN 10/100, 1x Ethernet WAN 10/100 - 1x WAN, LAN, Wifi, PWR, WPS, RE Leds - Reset, Wifi on/off, WPS, RE buttons - Serial UART at J4 onboard: 3.3v GND RX TX, 1152008N1 Label MAC addresses based on vendor firmware: LAN *:ea label WAN *:eb label +1 2.4 GHz *:ea label The label MAC address in found in u-boot 0x1fc00 Installation: Upload openwrt-ath79-generic-tplink_tl-wr841hp-v3-squashfs-factory.bin from stock firmware webgui. Maybe we need rename to shorten file name due to stock webgui error. Revert back to stock firmware instructions: - set your PC to static IP address 192.168.0.66 netmask 255.255.255.0 - download stock firmware from Tp-link website - put it in the root directory of tftp server software - rename it to wr841hpv3_tp_recovery.bin - power on while pressing Reset button until any Led is lighting up - wait for the router to reboot. done Forum support topic: https://forum.openwrt.org/t/support-for-tp-link-tl-wr841hp-v3-router Signed-off-by: Andy Lee [rebase and squash] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts new file mode 100644 index 00000000000..7170601f6ae --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wr841hp-v3", "qca,qca9533"; + model = "TP-Link TL-WR841HP v3"; + + aliases { + label-mac-device = &wmac; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wifi { + label = "green:wifi"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wan_green { + label = "green:wan"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "amber:wan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "green:wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + re { + label = "green:re"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wifi { + label = "WiFi button"; + linux,code = ; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + re { + label = "RE button"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x020000 0x7d0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + mtd-mac-address = <&uboot 0x1fc00>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 9720e37f997..d8e3d65967e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -71,7 +71,8 @@ tplink,archer-c59-v1|\ tplink,archer-c59-v2|\ tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ -tplink,archer-c60-v3) +tplink,archer-c60-v3|\ +tplink,tl-wr841hp-v3) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e" ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ;; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index c1ba7601824..2fa51ab9052 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -195,7 +195,8 @@ ath79_setup_interfaces() ;; comfast,cf-e560ac|\ qca,ap143-8m|\ - qca,ap143-16m) + qca,ap143-16m|\ + tplink,tl-wr841hp-v3) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index be6aa06b556..8b228a73d29 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -742,6 +742,15 @@ define Device/tplink_tl-wr810n-v2 endef TARGET_DEVICES += tplink_tl-wr810n-v2 +define Device/tplink_tl-wr841hp-v3 + $(Device/tplink-8mlzma) + SOC := qca9533 + DEVICE_MODEL := TL-WR841HP + DEVICE_VARIANT := v3 + TPLINK_HWID := 0x08411003 +endef +TARGET_DEVICES += tplink_tl-wr841hp-v3 + define Device/tplink_tl-wr842n-v1 $(Device/tplink-8m) SOC := ar7241