From: Daniel Dickinson <crazycshore@gmail.com>
Date: Sun, 28 Nov 2010 22:04:36 +0000 (+0000)
Subject: bcm63xx: Finalize support for DSL-274xB, rev C2.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c51d772e62a57c3659fca01b95f930ba6288b9e7;p=openwrt%2Fstaging%2Fsvanheule.git

bcm63xx: Finalize support for DSL-274xB, rev C2.

The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
---

diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/96358GW/network b/target/linux/brcm63xx/base-files/etc/defconfig/96358GW/network
new file mode 100644
index 0000000000..a35fd2ef9a
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/defconfig/96358GW/network
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option type 	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 7b46b5a167..bacd6665fc 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -25,6 +25,11 @@ brcm63xx_detect() {
 		brcm63xx_has_reset_button="true"
 		ifname=eth1
 		;;
+	"bcm63xx/96358GW "*)
+		status_led="power:green"
+		brcm63xx_has_reset_button="true"
+		ifname=eth0
+		;;
 	*)
 		;;
 	esac
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index be96a5f16a..588745cd2c 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -153,8 +153,8 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
 	# D-Link DSL-2640B
 	$(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
-	# D-Link DSL-2740B
-	$(call Image/Build/CFE,$(1),96358GW,6358,DSL2740B)
+	# D-Link DSL-2740B/DSL-2741B, rev C2
+	$(call Image/Build/CFE,$(1),96358GW,6358,DSL274XB-C2)
 
 	# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
 	$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
diff --git a/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch b/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch
new file mode 100644
index 0000000000..693ef9e40b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -577,6 +577,59 @@ static struct board_info __initdata boar
+  * known 6358 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6358
++
++static struct board_info __initdata board_96358gw = {
++	.name				= "96358GW",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "power:green",
++			.gpio		= 5,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "power:red",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "adsl",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "internet:green",
++			.gpio		= 2,
++		},
++		{
++			.name		= "internet:red",
++			.gpio		= 10,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.threshold	= 3,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96358vw = {
+ 	.name				= "96358VW",
+ 	.expected_cpu_id		= 0x6358,
+@@ -1356,6 +1409,7 @@ static const struct board_info __initdat
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
++	&board_96358gw,
+ 	&board_96358vw,
+ 	&board_96358vw2,
+ 	&board_AGPFS0,