From: Stijn Tintel Date: Tue, 26 Apr 2022 15:21:11 +0000 (+0300) Subject: qoriq: use FIT uImage for Firebox M300 kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c4b499bc03ab0e2eea643c46d1d781ab64e78931;p=openwrt%2Fstaging%2Fjogo.git qoriq: use FIT uImage for Firebox M300 kernel This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel --- diff --git a/target/linux/qoriq/image/generic.mk b/target/linux/qoriq/image/generic.mk index 0d7f5e4c10..b8ffc69ba0 100644 --- a/target/linux/qoriq/image/generic.mk +++ b/target/linux/qoriq/image/generic.mk @@ -1,10 +1,14 @@ define Device/watchguard_firebox-m300 DEVICE_VENDOR := WatchGuard DEVICE_MODEL := Firebox M300 + DEVICE_COMPAT_MESSAGE := \ + Kernel switched to FIT uImage. Update U-Boot environment. + DEVICE_COMPAT_VERSION := 1.1 DEVICE_DTS_DIR := $(DTS_DIR)/fsl DEVICE_PACKAGES := \ kmod-hwmon-w83793 kmod-ptp-qoriq kmod-rtc-rs5c372a kmod-tpm-i2c-atmel - KERNEL := kernel-bin | gzip | uImage gzip + KERNEL := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_SUFFIX := -fit-uImage.itb IMAGES := sdcard.img.gz sysupgrade.img.gz IMAGE/sysupgrade.img.gz := sdcard-img | gzip | append-metadata IMAGE/sdcard.img.gz := sdcard-img | gzip