From: John Crispin Date: Wed, 16 Apr 2014 12:01:09 +0000 (+0000) Subject: lantiq: ARV7519RW22: several fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=c4aae8fbc5b4654e73c5c8a227abe4a06a24958c;p=openwrt%2Fstaging%2Flinusw.git lantiq: ARV7519RW22: several fixes - Fix ethernet ports. - Clean DTS files. - WiFi is lantiq based (not supported yet), remove ath9k. Signed-off-by: Álvaro Fernández Rojas SVN-Revision: 40519 --- diff --git a/target/linux/lantiq/dts/ARV7519RW.dtsi b/target/linux/lantiq/dts/ARV7519RW.dtsi index 77904705f0..eff337e2a6 100644 --- a/target/linux/lantiq/dts/ARV7519RW.dtsi +++ b/target/linux/lantiq/dts/ARV7519RW.dtsi @@ -1,23 +1,54 @@ /include/ "vr9.dtsi" / { - model = "ARV7519 - Astoria Networks ARV7519RW22-A-LT"; - + chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; - + memory@0 { reg = <0x0 0x8000000>; }; - + fpi@10000000 { - + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "uboot_cfg"; + reg = <0x60000 0x20000>; + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x80000 0x1f00000>; + }; + + partition@1f80000 { + label = "boardconfig"; + reg = <0x1f80000 0x80000>; + read-only; + }; + }; + }; + gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; - + state_default: pinmux { mdio { lantiq,groups = "mdio"; @@ -63,20 +94,32 @@ reg = <0>; mac-address = [ 00 11 22 33 44 55 ]; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { compatible = "lantiq,xrx200-pdi-port"; reg = <2>; - phy-mode = "gmii"; + phy-mode = "mii"; phy-handle = <&phy11>; }; - ethernet@3 { + ethernet@4 { compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; }; }; - + wan: interface@1 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; @@ -84,7 +127,7 @@ reg = <1>; mac-address = [ 00 11 22 33 44 56 ]; lantiq,wan; - ethernet@4 { + ethernet@0 { compatible = "lantiq,xrx200-pdi-port"; reg = <0>; phy-mode = "rgmii"; @@ -102,11 +145,19 @@ }; phy11: ethernet-phy@11 { reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; }; phy13: ethernet-phy@13 { reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; }; }; }; @@ -116,7 +167,7 @@ gpios = <&gpio 32 0>; lantiq,portmask = <0x3>; }; - + pcie@d900000 { status = "disabled"; compatible = "lantiq,pcie-xway"; @@ -133,54 +184,55 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 20 1>; + linux,code = <0x211>; + }; reset { label = "reset"; gpios = <&gpio 22 1>; linux,code = <0x198>; }; - rfkill { label = "rfkill"; gpios = <&gpio 45 1>; linux,code = <0xf7>; }; - wps { - gpios = <&gpio 20 1>; - linux,code = <0x211>; - }; }; gpio-leds { compatible = "gpio-leds"; - lan{ /* green */ + lan_green { label = "lan"; - gpios = <&gpio 02 1>; + gpios = <&gpio 2 1>; }; - voice { /* green */ - label = "voice"; - gpios = <&gpio 29 1>; - }; - message1 { /* red */ - label = "message1"; + message_red { + label = "message_red"; gpios = <&gpio 10 1>; }; - message2 { /* green */ - label = "message2"; - gpios = <&gpio 19 1>; + power_red { + label = "power"; + gpios = <&gpio 14 1>; + default-state = "on"; }; - message3 { /* orange */ - label = "message3"; - gpios = <&gpio 28 1>; - }; - alarm { /* blue */ + alarm_blue { label = "alarm"; gpios = <&gpio 15 1>; }; - power { /* red */ - label = "power"; - gpios = <&gpio 14 1>; - default-state = "on"; + message_orange { + label = "message_orange"; + gpios = <&gpio 19 1>; + }; + message_green { + label = "message_green"; + gpios = <&gpio 28 1>; + }; + voice_green { + label = "voice"; + gpios = <&gpio 29 1>; }; }; }; diff --git a/target/linux/lantiq/dts/ARV7519RWV11.dts b/target/linux/lantiq/dts/ARV7519RWV11.dts index c77ffb416d..7dadf144f9 100644 --- a/target/linux/lantiq/dts/ARV7519RWV11.dts +++ b/target/linux/lantiq/dts/ARV7519RWV11.dts @@ -1,50 +1,11 @@ /dts-v1/; - /include/ "ARV7519RW.dtsi" / { - fpi@10000000 { - localbus@0 { - nor-boot@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x000000000000 0x00060000>; - read-only; - }; - - partition@60000 { - label = "uboot_cfg"; - reg = <0x000000060000 0x00020000>; - read-only; - }; - - partition@80000 { - label = "firmware"; - reg = <0x000000080000 0x01f00000>; - }; - - partition@1f80000 { - label = "boardconfig"; - reg = <0x000001f80000 0x00080000>; - read-only; - - }; - - - - }; - }; - }; gphy-xrx200 { compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/ + firmware = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/ phys = [ 00 01 ]; }; }; diff --git a/target/linux/lantiq/dts/ARV7519RWV12.dts b/target/linux/lantiq/dts/ARV7519RWV12.dts index 6f1bf51e1b..0dd7972d18 100644 --- a/target/linux/lantiq/dts/ARV7519RWV12.dts +++ b/target/linux/lantiq/dts/ARV7519RWV12.dts @@ -1,50 +1,11 @@ /dts-v1/; - /include/ "ARV7519RW.dtsi" / { - fpi@10000000 { - localbus@0 { - nor-boot@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x000000000000 0x00060000>; - read-only; - }; - - partition@60000 { - label = "uboot_cfg"; - reg = <0x000000060000 0x00020000>; - read-only; - }; - - partition@80000 { - label = "firmware"; - reg = <0x000000080000 0x01f00000>; - }; - - partition@1f80000 { - label = "boardconfig"; - reg = <0x000001f80000 0x00080000>; - read-only; - - }; - - - - }; - }; - }; gphy-xrx200 { compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/ + firmware = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/ phys = [ 00 01 ]; }; }; diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk b/target/linux/lantiq/xrx200/profiles/arv.mk index a32ec64ac0..776bf49a0a 100644 --- a/target/linux/lantiq/xrx200/profiles/arv.mk +++ b/target/linux/lantiq/xrx200/profiles/arv.mk @@ -37,9 +37,8 @@ endef $(eval $(call Profile,VGV7519BRN)) define Profile/ARV7519RWV11 - NAME:=Livebox Astoria V1 - PACKAGES:=kmod-ath9k wpad-mini \ - kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ + NAME:=Livebox Astoria ARV7519 v1.1 + PACKAGES:=kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \ kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \ ltq-vdsl-app ppp-mod-pppoa @@ -48,9 +47,8 @@ endef $(eval $(call Profile,ARV7519RWV11)) define Profile/ARV7519RWV12 - NAME:=Livebox Astoria V2 - PACKAGES:=kmod-ath9k wpad-mini \ - kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ + NAME:=Livebox Astoria ARV7519 v1.2 + PACKAGES:=kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \ kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \ ltq-vdsl-app ppp-mod-pppoa